---
_id: '64158'
abstract:
- lang: eng
text: "ABSTRACT\r\n \r\n Electrification
offers a promising route to reduce CO\r\n 2\r\n
\ emissions in the chemical sector. In distillation, heat pump
integration such as mechanical vapor recompression (MVR) can replace fossil‐based
utilities, but column parameters like pressure drop should be accurately considered
when assessing integration potential. This work discusses the effect of feed preheating
and column pressure drop on MVR integration potential. The two binary separation
tasks, methanol–water and benzene–toluene, are analyzed to identify energetically
optimal preheater and MVR design. In addition, MVR integration in a bioethanol
vacuum distillation sequence is evaluated for utility demand, CO\r\n 2\r\n
\ emissions, and economic feasibility under varying pressure
drops, preheating configurations, and cost and emission scenarios.\r\n "
article_number: cite.70074
author:
- first_name: Thorben
full_name: Hochhaus, Thorben
last_name: Hochhaus
- first_name: Sebastian
full_name: Siepmann, Sebastian
last_name: Siepmann
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Hochhaus T, Siepmann S, Grünewald M, Riese J. Impact of Distillation Column
Design on Potential for the Integration of Mechanical Vapor Recompression. Chemie
Ingenieur Technik. Published online 2026. doi:10.1002/cite.70074
apa: Hochhaus, T., Siepmann, S., Grünewald, M., & Riese, J. (2026). Impact of
Distillation Column Design on Potential for the Integration of Mechanical Vapor
Recompression. Chemie Ingenieur Technik, Article cite. 70074. https://doi.org/10.1002/cite.70074
bibtex: '@article{Hochhaus_Siepmann_Grünewald_Riese_2026, title={Impact of Distillation
Column Design on Potential for the Integration of Mechanical Vapor Recompression},
DOI={10.1002/cite.70074}, number={cite.
70074}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Hochhaus,
Thorben and Siepmann, Sebastian and Grünewald, Marcus and Riese, Julia}, year={2026}
}'
chicago: Hochhaus, Thorben, Sebastian Siepmann, Marcus Grünewald, and Julia Riese.
“Impact of Distillation Column Design on Potential for the Integration of Mechanical
Vapor Recompression.” Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70074.
ieee: 'T. Hochhaus, S. Siepmann, M. Grünewald, and J. Riese, “Impact of Distillation
Column Design on Potential for the Integration of Mechanical Vapor Recompression,”
Chemie Ingenieur Technik, Art. no. cite. 70074, 2026, doi: 10.1002/cite.70074.'
mla: Hochhaus, Thorben, et al. “Impact of Distillation Column Design on Potential
for the Integration of Mechanical Vapor Recompression.” Chemie Ingenieur Technik,
cite. 70074, Wiley, 2026, doi:10.1002/cite.70074.
short: T. Hochhaus, S. Siepmann, M. Grünewald, J. Riese, Chemie Ingenieur Technik
(2026).
date_created: 2026-02-16T07:31:17Z
date_updated: 2026-02-16T07:32:07Z
department:
- _id: '831'
doi: 10.1002/cite.70074
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Impact of Distillation Column Design on Potential for the Integration of Mechanical
Vapor Recompression
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '64159'
abstract:
- lang: eng
text: "ABSTRACT\r\n Separation
processes, such as distillation and stripping, are highly energy‐intensive. Typically,
energy is supplied indirectly via a reboiler, which is often associated with heat
losses. We present a preliminary theoretical evaluation of a novel concept to
supply energy directly inside the column using heatable structured packings. These
packings can be produced by multi‐material 3D printing, resulting in a conductive
inner layer and an insulating outer layer. Functioning as electric resistance
heaters, these packings serve as heating elements. In this numerical study, we
compared different scenarios of energy supply along the height of the column,
including uniform distribution, applying a temperature profile, and using or omitting
a reboiler."
article_number: e70076
article_type: original
author:
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Sascha
full_name: Brüne, Sascha
last_name: Brüne
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Lutters N, Brüne S, Riese J. Preliminary Numerical Evaluation of Directly Heated
Structured Packings to be Used for Separation Processes. Chemie Ingenieur Technik.
Published online 2026. doi:10.1002/cite.70076
apa: Lutters, N., Brüne, S., & Riese, J. (2026). Preliminary Numerical Evaluation
of Directly Heated Structured Packings to be Used for Separation Processes. Chemie
Ingenieur Technik, Article e70076. https://doi.org/10.1002/cite.70076
bibtex: '@article{Lutters_Brüne_Riese_2026, title={Preliminary Numerical Evaluation
of Directly Heated Structured Packings to be Used for Separation Processes}, DOI={10.1002/cite.70076}, number={e70076},
journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Lutters, Nicole
and Brüne, Sascha and Riese, Julia}, year={2026} }'
chicago: Lutters, Nicole, Sascha Brüne, and Julia Riese. “Preliminary Numerical
Evaluation of Directly Heated Structured Packings to Be Used for Separation Processes.”
Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70076.
ieee: 'N. Lutters, S. Brüne, and J. Riese, “Preliminary Numerical Evaluation of
Directly Heated Structured Packings to be Used for Separation Processes,” Chemie
Ingenieur Technik, Art. no. e70076, 2026, doi: 10.1002/cite.70076.'
mla: Lutters, Nicole, et al. “Preliminary Numerical Evaluation of Directly Heated
Structured Packings to Be Used for Separation Processes.” Chemie Ingenieur
Technik, e70076, Wiley, 2026, doi:10.1002/cite.70076.
short: N. Lutters, S. Brüne, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-02-16T07:56:53Z
date_updated: 2026-02-23T06:59:41Z
department:
- _id: '831'
doi: 10.1002/cite.70076
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Preliminary Numerical Evaluation of Directly Heated Structured Packings to
be Used for Separation Processes
type: journal_article
user_id: '22006'
year: '2026'
...
---
_id: '64876'
abstract:
- lang: eng
text: "ABSTRACT\r\n This study
shows the applicability of ultrasonic sensors for measuring two‐phase layer heights
in sieve tray columns under dynamic operating conditions. Although these sensors
are known for their precision in stationary systems, their reliability under fluctuating
flow conditions has remained unclear. To validate their accuracy, ultrasonic measurements
were compared with both automated image analysis via a Python algorithm and manual
video evaluation. Results show that ultrasonic sensors maintain high precision
at moderate gas loads and with small hole diameters. Increased gas loads and turbulence,
however, reduced measurement accuracy due to signal scattering. The findings highlight
the potential of ultrasonic sensing for real‐time, noninvasive monitoring in dynamic
multiphase systems."
article_number: e70087
author:
- first_name: Niklas
full_name: Breuer, Niklas
last_name: Breuer
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Breuer N, Grünewald M, Riese J. Application of Ultrasonic Sensors for Determining
the Height of Dynamic Two‐Phase Layers in Tray Columns. Chemie Ingenieur Technik.
Published online 2026. doi:10.1002/cite.70087
apa: Breuer, N., Grünewald, M., & Riese, J. (2026). Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns.
Chemie Ingenieur Technik, Article e70087. https://doi.org/10.1002/cite.70087
bibtex: '@article{Breuer_Grünewald_Riese_2026, title={Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns},
DOI={10.1002/cite.70087}, number={e70087},
journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Breuer, Niklas
and Grünewald, Marcus and Riese, Julia}, year={2026} }'
chicago: Breuer, Niklas, Marcus Grünewald, and Julia Riese. “Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns.”
Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70087.
ieee: 'N. Breuer, M. Grünewald, and J. Riese, “Application of Ultrasonic Sensors
for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns,” Chemie
Ingenieur Technik, Art. no. e70087, 2026, doi: 10.1002/cite.70087.'
mla: Breuer, Niklas, et al. “Application of Ultrasonic Sensors for Determining the
Height of Dynamic Two‐Phase Layers in Tray Columns.” Chemie Ingenieur Technik,
e70087, Wiley, 2026, doi:10.1002/cite.70087.
short: N. Breuer, M. Grünewald, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-03-10T15:01:19Z
date_updated: 2026-03-10T15:01:55Z
department:
- _id: '831'
doi: 10.1002/cite.70087
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Application of Ultrasonic Sensors for Determining the Height of Dynamic Two‐Phase
Layers in Tray Columns
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '65267'
author:
- first_name: Viola
full_name: Hollenhorst, Viola
id: '50519'
last_name: Hollenhorst
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Hollenhorst V, Riese J, Kenig EY. Investigation of Surface Roughness Effects
on Flow Patterns and Thermal Performance in Additively Manufactured Channels.
In: ; 2026.'
apa: Hollenhorst, V., Riese, J., & Kenig, E. Y. (2026). Investigation of
Surface Roughness Effects on Flow Patterns and Thermal Performance in Additively
Manufactured Channels. Annual Meeting of the DECHEMA/VDI Specialist Groups
Fluid Separations and Heat & Mass Transfer, Luzern, Schweiz.
bibtex: '@inproceedings{Hollenhorst_Riese_Kenig_2026, title={Investigation of Surface
Roughness Effects on Flow Patterns and Thermal Performance in Additively Manufactured
Channels}, author={Hollenhorst, Viola and Riese, Julia and Kenig, Eugeny Y.},
year={2026} }'
chicago: Hollenhorst, Viola, Julia Riese, and Eugeny Y. Kenig. “Investigation of
Surface Roughness Effects on Flow Patterns and Thermal Performance in Additively
Manufactured Channels,” 2026.
ieee: V. Hollenhorst, J. Riese, and E. Y. Kenig, “Investigation of Surface Roughness
Effects on Flow Patterns and Thermal Performance in Additively Manufactured Channels,”
presented at the Annual Meeting of the DECHEMA/VDI Specialist Groups Fluid Separations
and Heat & Mass Transfer, Luzern, Schweiz, 2026.
mla: Hollenhorst, Viola, et al. Investigation of Surface Roughness Effects on
Flow Patterns and Thermal Performance in Additively Manufactured Channels.
2026.
short: 'V. Hollenhorst, J. Riese, E.Y. Kenig, in: 2026.'
conference:
end_date: 2026-03-11
location: Luzern, Schweiz
name: Annual Meeting of the DECHEMA/VDI Specialist Groups Fluid Separations and
Heat & Mass Transfer
start_date: 2026-03-09
date_created: 2026-04-01T06:44:05Z
date_updated: 2026-04-01T06:56:44Z
department:
- _id: '9'
- _id: '831'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Investigation of Surface Roughness Effects on Flow Patterns and Thermal Performance
in Additively Manufactured Channels
type: conference_abstract
user_id: '50519'
year: '2026'
...
---
_id: '65446'
author:
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Franke P, Lutters N, Riese J, Kenig E. Identification of multiple steady states
in reactive absorption columns equipped with structured packings. In: ; 2026.'
apa: Franke, P., Lutters, N., Riese, J., & Kenig, E. (2026). Identification
of multiple steady states in reactive absorption columns equipped with structured
packings. DECHEMA/VDI - Fluidverfahrenstechnik und Wärme- und Stoffübertragung
2026, Luzern (CH).
bibtex: '@inproceedings{Franke_Lutters_Riese_Kenig_2026, place={ Konferenz DECHEMA/VDI
- Fluidverfahrenstechnik und Wärme- und Stoffübertragung 2026 an der Hochschule
Luzern}, title={Identification of multiple steady states in reactive absorption
columns equipped with structured packings}, author={Franke, Patrick and Lutters,
Nicole and Riese, Julia and Kenig, Eugeny}, year={2026} }'
chicago: Franke, Patrick, Nicole Lutters, Julia Riese, and Eugeny Kenig. “Identification
of Multiple Steady States in Reactive Absorption Columns Equipped with Structured
Packings.” Konferenz DECHEMA/VDI - Fluidverfahrenstechnik und Wärme- und Stoffübertragung
2026 an der Hochschule Luzern, 2026.
ieee: P. Franke, N. Lutters, J. Riese, and E. Kenig, “Identification of multiple
steady states in reactive absorption columns equipped with structured packings,”
presented at the DECHEMA/VDI - Fluidverfahrenstechnik und Wärme- und Stoffübertragung
2026, Luzern (CH), 2026.
mla: Franke, Patrick, et al. Identification of Multiple Steady States in Reactive
Absorption Columns Equipped with Structured Packings. 2026.
short: 'P. Franke, N. Lutters, J. Riese, E. Kenig, in: Konferenz DECHEMA/VDI -
Fluidverfahrenstechnik und Wärme- und Stoffübertragung 2026 an der Hochschule
Luzern, 2026.'
conference:
end_date: 2026-03-11
location: Luzern (CH)
name: DECHEMA/VDI - Fluidverfahrenstechnik und Wärme- und Stoffübertragung 2026
start_date: 2026-03-09
date_created: 2026-04-15T10:42:48Z
date_updated: 2026-04-15T10:43:28Z
department:
- _id: '9'
- _id: '831'
extern: '1'
language:
- iso: eng
place: ' Konferenz DECHEMA/VDI - Fluidverfahrenstechnik und Wärme- und Stoffübertragung
2026 an der Hochschule Luzern'
status: public
title: Identification of multiple steady states in reactive absorption columns equipped
with structured packings
type: conference_abstract
user_id: '22006'
year: '2026'
...
---
_id: '65599'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Luisa
full_name: Krogbäumker, Luisa
id: '81824'
last_name: Krogbäumker
- first_name: Kevin
full_name: Böse, Kevin
last_name: Böse
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Schlüter A, Krogbäumker L, Böse K, Riese J. Opportunities and obstacles for
industrial applications. In: Hydrogen and Bioenergy. Elsevier; 2026. doi:10.1016/b978-0-443-40493-1.00019-x'
apa: Schlüter, A., Krogbäumker, L., Böse, K., & Riese, J. (2026). Opportunities
and obstacles for industrial applications. In Hydrogen and Bioenergy. Elsevier.
https://doi.org/10.1016/b978-0-443-40493-1.00019-x
bibtex: '@inbook{Schlüter_Krogbäumker_Böse_Riese_2026, title={Opportunities and
obstacles for industrial applications}, DOI={10.1016/b978-0-443-40493-1.00019-x},
booktitle={Hydrogen and Bioenergy}, publisher={Elsevier}, author={Schlüter, Alexander
and Krogbäumker, Luisa and Böse, Kevin and Riese, Julia}, year={2026} }'
chicago: Schlüter, Alexander, Luisa Krogbäumker, Kevin Böse, and Julia Riese. “Opportunities
and Obstacles for Industrial Applications.” In Hydrogen and Bioenergy.
Elsevier, 2026. https://doi.org/10.1016/b978-0-443-40493-1.00019-x.
ieee: A. Schlüter, L. Krogbäumker, K. Böse, and J. Riese, “Opportunities and obstacles
for industrial applications,” in Hydrogen and Bioenergy, Elsevier, 2026.
mla: Schlüter, Alexander, et al. “Opportunities and Obstacles for Industrial Applications.”
Hydrogen and Bioenergy, Elsevier, 2026, doi:10.1016/b978-0-443-40493-1.00019-x.
short: 'A. Schlüter, L. Krogbäumker, K. Böse, J. Riese, in: Hydrogen and Bioenergy,
Elsevier, 2026.'
date_created: 2026-05-11T07:31:45Z
date_updated: 2026-05-20T09:14:12Z
department:
- _id: '831'
- _id: '876'
- _id: '321'
- _id: '393'
doi: 10.1016/b978-0-443-40493-1.00019-x
language:
- iso: eng
publication: Hydrogen and Bioenergy
publication_identifier:
isbn:
- '9780443404931'
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Opportunities and obstacles for industrial applications
type: book_chapter
user_id: '101499'
year: '2026'
...
---
_id: '65754'
abstract:
- lang: eng
text: "ABSTRACT\r\n \r\n The
integration of heat pumps offers a promising route for electrifying chemical processes
and reducing CO\r\n 2\r\n emissions.
Their feasibility strongly depends on the temperature levels and the quantities
of available heat sources and sinks, which can be influenced by adjusting process
operating parameters to enhance integration potential. The number and quality
of these sources and sinks also determine suitable heat pump configurations and
therefore the technical and economic viability of implementation. In addition,
refrigerant selection is a critical factor, as it is restricted by regulations
such as the F‐Gas Regulation. This study investigates how different operating
parameters affect the integration potential of various heat pump configurations
in a CO\r\n 2\r\n absorption
process using MEA as solvent. Furthermore, economic evaluations are carried out
considering different electricity price scenarios and allowable refrigerants.\r\n
\ "
article_number: e70131
author:
- first_name: Johannes
full_name: Wloch, Johannes
last_name: Wloch
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Wloch J, Grünewald M, Riese J. Matching Heat Pump Configurations and Process
Parameters for Cost‐Minimal Heat‐Integrated CO2-Capturing Process.
Chemie Ingenieur Technik. Published online 2026. doi:10.1002/cite.70131
apa: Wloch, J., Grünewald, M., & Riese, J. (2026). Matching Heat Pump Configurations
and Process Parameters for Cost‐Minimal Heat‐Integrated CO2-Capturing
Process. Chemie Ingenieur Technik, Article e70131. https://doi.org/10.1002/cite.70131
bibtex: '@article{Wloch_Grünewald_Riese_2026, title={Matching Heat Pump Configurations
and Process Parameters for Cost‐Minimal Heat‐Integrated CO2-Capturing
Process}, DOI={10.1002/cite.70131},
number={e70131}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Wloch,
Johannes and Grünewald, Marcus and Riese, Julia}, year={2026} }'
chicago: Wloch, Johannes, Marcus Grünewald, and Julia Riese. “Matching Heat Pump
Configurations and Process Parameters for Cost‐Minimal Heat‐Integrated CO2-Capturing
Process.” Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70131.
ieee: 'J. Wloch, M. Grünewald, and J. Riese, “Matching Heat Pump Configurations
and Process Parameters for Cost‐Minimal Heat‐Integrated CO2-Capturing
Process,” Chemie Ingenieur Technik, Art. no. e70131, 2026, doi: 10.1002/cite.70131.'
mla: Wloch, Johannes, et al. “Matching Heat Pump Configurations and Process Parameters
for Cost‐Minimal Heat‐Integrated CO2-Capturing Process.” Chemie
Ingenieur Technik, e70131, Wiley, 2026, doi:10.1002/cite.70131.
short: J. Wloch, M. Grünewald, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-06-02T09:59:46Z
date_updated: 2026-06-02T10:03:57Z
department:
- _id: '831'
doi: 10.1002/cite.70131
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Matching Heat Pump Configurations and Process Parameters for Cost‐Minimal Heat‐Integrated
CO2-Capturing Process
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '66007'
abstract:
- lang: eng
text: The reduction of CO2-emissions in the chemical industry is essential
to meet European climate targets. Particularly, the reliance on fossil fuels for
process heat supply is a key factor for CO2-emissions. Electrically driven compression
heat pumps are a promising option to reduce fossil fuel consumption by upgrading
low-temperature waste heat to a higher temperature level, provided that low-carbon
electricity is available. However, the integration of heat pumps into chemical
utility systems remains a challenge due to economic constraints and the high complexity
associated with site-wide heat integration and retrofit of existing structures.
This work presents a mixed-integer linear programming (MILP) approach for the
optimization of utility systems with integrated heat pumps. To address computational
complexity, candidate utility temperature levels are pre-selected, and feasible
heat pump coefficients of performance (COP) are precomputed. The framework is
applied to both greenfield and retrofit scenarios for a synthetic case study consisting
of 400 process streams. In the greenfield scenario, optimal utility temperature
levels and heat pump integration configurations are identified. For the retrofit
scenario, temperature levels of an existing utility system are modified to reduce
total annual costs (TAC). Additionally, sensitivity analysis is conducted to assess
the influence of key economic and environmental parameters. The presented case
studies demonstrate short solution times, highlighting the suitability of the
proposed framework for screening studies and systematic sensitivity analyses in
early-stage design and retrofit applications.
author:
- first_name: Thorben
full_name: Hochhaus, Thorben
last_name: Hochhaus
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Hochhaus T, Grünewald M, Riese J. Optimization of Site-wide Heat-Integrated
Utility Systems with Heat Pumps using MILP. In: Systems and Control Transactions.
Vol 6. PSE Press; 2026. doi:10.69997/sct.152209'
apa: Hochhaus, T., Grünewald, M., & Riese, J. (2026). Optimization of Site-wide
Heat-Integrated Utility Systems with Heat Pumps using MILP. Systems and Control
Transactions, 6. https://doi.org/10.69997/sct.152209
bibtex: '@inproceedings{Hochhaus_Grünewald_Riese_2026, title={Optimization of Site-wide
Heat-Integrated Utility Systems with Heat Pumps using MILP}, volume={6}, DOI={10.69997/sct.152209}, booktitle={Systems
and Control Transactions}, publisher={PSE Press}, author={Hochhaus, Thorben and
Grünewald, Marcus and Riese, Julia}, year={2026} }'
chicago: Hochhaus, Thorben, Marcus Grünewald, and Julia Riese. “Optimization of
Site-Wide Heat-Integrated Utility Systems with Heat Pumps Using MILP.” In Systems
and Control Transactions, Vol. 6. PSE Press, 2026. https://doi.org/10.69997/sct.152209.
ieee: 'T. Hochhaus, M. Grünewald, and J. Riese, “Optimization of Site-wide Heat-Integrated
Utility Systems with Heat Pumps using MILP,” in Systems and Control Transactions,
2026, vol. 6, doi: 10.69997/sct.152209.'
mla: Hochhaus, Thorben, et al. “Optimization of Site-Wide Heat-Integrated Utility
Systems with Heat Pumps Using MILP.” Systems and Control Transactions,
vol. 6, PSE Press, 2026, doi:10.69997/sct.152209.
short: 'T. Hochhaus, M. Grünewald, J. Riese, in: Systems and Control Transactions,
PSE Press, 2026.'
date_created: 2026-06-22T11:32:30Z
date_updated: 2026-06-22T11:33:05Z
department:
- _id: '831'
doi: 10.69997/sct.152209
intvolume: ' 6'
language:
- iso: eng
publication: Systems and Control Transactions
publication_identifier:
issn:
- 2818-4734
publication_status: published
publisher: PSE Press
quality_controlled: '1'
status: public
title: Optimization of Site-wide Heat-Integrated Utility Systems with Heat Pumps using
MILP
type: conference
user_id: '101499'
volume: 6
year: '2026'
...
---
_id: '66008'
abstract:
- lang: eng
text: Heat pumps offer the possibility of reducing CO2-emissions in the
chemical industry. However, the integration of heat pumps, especially in non-continuous
processes, faces several challenges. Energy storage facilitates a way to enhance
heat integration by providing a continuous supply of heat flows. By doing so,
the question arises as to whether this implementation should be applied to the
process or to the utility level. At the process level, there is usually more freedom,
as one is not bound by the existing temperature levels of the utility system,
which are mostly difficult to retrofit. Therefore, this study presents an approach
that generates heat integration concepts at the process level based on two different
criteria. These criteria influence which process streams are grouped for a storage
implementation and therefore influence the heat integration. The aim is to maintain
the heat flows as continuous as possible by integrated heat storages. Finally,
the possible heat integration concept is evaluated in terms of energy efficiency
by a know method for continuous process streams, here the pinch analysis.
author:
- first_name: Johannes
full_name: Wloch, Johannes
last_name: Wloch
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Wloch J, Grünewald M, Riese J. Development of a methodology for heat pump-based
heat integration in batch processes. In: Systems and Control Transactions.
Vol 6. PSE Press; 2026. doi:10.69997/sct.140728'
apa: Wloch, J., Grünewald, M., & Riese, J. (2026). Development of a methodology
for heat pump-based heat integration in batch processes. Systems and Control
Transactions, 6. https://doi.org/10.69997/sct.140728
bibtex: '@inproceedings{Wloch_Grünewald_Riese_2026, title={Development of a methodology
for heat pump-based heat integration in batch processes}, volume={6}, DOI={10.69997/sct.140728}, booktitle={Systems
and Control Transactions}, publisher={PSE Press}, author={Wloch, Johannes and
Grünewald, Marcus and Riese, Julia}, year={2026} }'
chicago: Wloch, Johannes, Marcus Grünewald, and Julia Riese. “Development of a Methodology
for Heat Pump-Based Heat Integration in Batch Processes.” In Systems and Control
Transactions, Vol. 6. PSE Press, 2026. https://doi.org/10.69997/sct.140728.
ieee: 'J. Wloch, M. Grünewald, and J. Riese, “Development of a methodology for heat
pump-based heat integration in batch processes,” in Systems and Control Transactions,
2026, vol. 6, doi: 10.69997/sct.140728.'
mla: Wloch, Johannes, et al. “Development of a Methodology for Heat Pump-Based Heat
Integration in Batch Processes.” Systems and Control Transactions, vol.
6, PSE Press, 2026, doi:10.69997/sct.140728.
short: 'J. Wloch, M. Grünewald, J. Riese, in: Systems and Control Transactions,
PSE Press, 2026.'
date_created: 2026-06-22T11:33:19Z
date_updated: 2026-06-22T11:33:43Z
department:
- _id: '831'
doi: 10.69997/sct.140728
intvolume: ' 6'
language:
- iso: eng
publication: Systems and Control Transactions
publication_identifier:
issn:
- 2818-4734
publication_status: published
publisher: PSE Press
quality_controlled: '1'
status: public
title: Development of a methodology for heat pump-based heat integration in batch
processes
type: conference
user_id: '101499'
volume: 6
year: '2026'
...
---
_id: '66059'
article_number: '111129'
author:
- first_name: Petro
full_name: Kapustenko, Petro
last_name: Kapustenko
- first_name: Leonid
full_name: Tovazhnyanskyy, Leonid
last_name: Tovazhnyanskyy
- first_name: Olga
full_name: Arsenyeva, Olga
id: '101505'
last_name: Arsenyeva
orcid: https://orcid.org/0000-0001-9013-6451
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Petar Sabev
full_name: Varbanov, Petar Sabev
last_name: Varbanov
citation:
ama: Kapustenko P, Tovazhnyanskyy L, Arsenyeva O, Riese J, Varbanov PS. Selection
of the mini- and micro-channels geometry for improved heat recuperation in specific
industrial conditions. International Journal of Thermal Sciences. 2026;229.
doi:10.1016/j.ijthermalsci.2026.111129
apa: Kapustenko, P., Tovazhnyanskyy, L., Arsenyeva, O., Riese, J., & Varbanov,
P. S. (2026). Selection of the mini- and micro-channels geometry for improved
heat recuperation in specific industrial conditions. International Journal
of Thermal Sciences, 229, Article 111129. https://doi.org/10.1016/j.ijthermalsci.2026.111129
bibtex: '@article{Kapustenko_Tovazhnyanskyy_Arsenyeva_Riese_Varbanov_2026, title={Selection
of the mini- and micro-channels geometry for improved heat recuperation in specific
industrial conditions}, volume={229}, DOI={10.1016/j.ijthermalsci.2026.111129},
number={111129}, journal={International Journal of Thermal Sciences}, publisher={Elsevier
BV}, author={Kapustenko, Petro and Tovazhnyanskyy, Leonid and Arsenyeva, Olga
and Riese, Julia and Varbanov, Petar Sabev}, year={2026} }'
chicago: Kapustenko, Petro, Leonid Tovazhnyanskyy, Olga Arsenyeva, Julia Riese,
and Petar Sabev Varbanov. “Selection of the Mini- and Micro-Channels Geometry
for Improved Heat Recuperation in Specific Industrial Conditions.” International
Journal of Thermal Sciences 229 (2026). https://doi.org/10.1016/j.ijthermalsci.2026.111129.
ieee: 'P. Kapustenko, L. Tovazhnyanskyy, O. Arsenyeva, J. Riese, and P. S. Varbanov,
“Selection of the mini- and micro-channels geometry for improved heat recuperation
in specific industrial conditions,” International Journal of Thermal Sciences,
vol. 229, Art. no. 111129, 2026, doi: 10.1016/j.ijthermalsci.2026.111129.'
mla: Kapustenko, Petro, et al. “Selection of the Mini- and Micro-Channels Geometry
for Improved Heat Recuperation in Specific Industrial Conditions.” International
Journal of Thermal Sciences, vol. 229, 111129, Elsevier BV, 2026, doi:10.1016/j.ijthermalsci.2026.111129.
short: P. Kapustenko, L. Tovazhnyanskyy, O. Arsenyeva, J. Riese, P.S. Varbanov,
International Journal of Thermal Sciences 229 (2026).
date_created: 2026-06-26T07:23:08Z
date_updated: 2026-06-26T07:23:34Z
department:
- _id: '831'
doi: 10.1016/j.ijthermalsci.2026.111129
intvolume: ' 229'
language:
- iso: eng
publication: International Journal of Thermal Sciences
publication_identifier:
issn:
- 1290-0729
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Selection of the mini- and micro-channels geometry for improved heat recuperation
in specific industrial conditions
type: journal_article
user_id: '101499'
volume: 229
year: '2026'
...
---
_id: '66554'
article_number: '104855'
author:
- first_name: Olga
full_name: Arsenyeva, Olga
id: '101505'
last_name: Arsenyeva
orcid: https://orcid.org/0000-0001-9013-6451
- first_name: Niklas
full_name: Breuer, Niklas
last_name: Breuer
- first_name: Yevhenii
full_name: Riepin, Yevhenii
last_name: Riepin
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Arsenyeva O, Breuer N, Riepin Y, Grünewald M, Riese J. Method for estimation
of plate heat exchanger design for a flexible methanol–water distillation column.
Thermal Science and Engineering Progress. Published online 2026. doi:10.1016/j.tsep.2026.104855
apa: Arsenyeva, O., Breuer, N., Riepin, Y., Grünewald, M., & Riese, J. (2026).
Method for estimation of plate heat exchanger design for a flexible methanol–water
distillation column. Thermal Science and Engineering Progress, Article
104855. https://doi.org/10.1016/j.tsep.2026.104855
bibtex: '@article{Arsenyeva_Breuer_Riepin_Grünewald_Riese_2026, title={Method for
estimation of plate heat exchanger design for a flexible methanol–water distillation
column}, DOI={10.1016/j.tsep.2026.104855},
number={104855}, journal={Thermal Science and Engineering Progress}, publisher={Elsevier
BV}, author={Arsenyeva, Olga and Breuer, Niklas and Riepin, Yevhenii and Grünewald,
Marcus and Riese, Julia}, year={2026} }'
chicago: Arsenyeva, Olga, Niklas Breuer, Yevhenii Riepin, Marcus Grünewald, and
Julia Riese. “Method for Estimation of Plate Heat Exchanger Design for a Flexible
Methanol–Water Distillation Column.” Thermal Science and Engineering Progress,
2026. https://doi.org/10.1016/j.tsep.2026.104855.
ieee: 'O. Arsenyeva, N. Breuer, Y. Riepin, M. Grünewald, and J. Riese, “Method for
estimation of plate heat exchanger design for a flexible methanol–water distillation
column,” Thermal Science and Engineering Progress, Art. no. 104855, 2026,
doi: 10.1016/j.tsep.2026.104855.'
mla: Arsenyeva, Olga, et al. “Method for Estimation of Plate Heat Exchanger Design
for a Flexible Methanol–Water Distillation Column.” Thermal Science and Engineering
Progress, 104855, Elsevier BV, 2026, doi:10.1016/j.tsep.2026.104855.
short: O. Arsenyeva, N. Breuer, Y. Riepin, M. Grünewald, J. Riese, Thermal Science
and Engineering Progress (2026).
date_created: 2026-07-22T05:40:16Z
date_updated: 2026-07-22T05:40:47Z
department:
- _id: '831'
doi: 10.1016/j.tsep.2026.104855
language:
- iso: eng
publication: Thermal Science and Engineering Progress
publication_identifier:
issn:
- 2451-9049
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Method for estimation of plate heat exchanger design for a flexible methanol–water
distillation column
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '66764'
abstract:
- lang: eng
text: "ABSTRACT\r\n \r\n Methane,
synthesized from renewable hydrogen and biogenic CO\r\n 2\r\n
\ , can be a part of the transformation towards renewable energy
carriers. A major engineering challenge is the optimization of the fixed‐bed reactor
design, specifically the heat dissipation in regions of high reaction heat release.
A mitigation concept is the introduction of inert material into the fixed bed,
called catalyst dilution. In this study, a 1D continuity model is presented, which
aims to predict catalyst superheating. This model is used in an exploratory study
to identify system sensitivity and optimization parameters. Subsequently, an optimization
framework for improving the reactor design is tested, resulting in a 148‐K reduction
in peak catalyst temperature when using a 33.3 vol% catalyst dilution.\r\n "
article_number: e70162
article_type: original
author:
- first_name: Torben
full_name: Schmücker, Torben
id: '111274'
last_name: Schmücker
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Schmücker T, Riese J. Model‐Based Optimization Framework for Catalyst Dilution
Applications in CO2‐Methanation Reactors. Chemie Ingenieur Technik. Published
online 2026. doi:10.1002/cite.70162
apa: Schmücker, T., & Riese, J. (2026). Model‐Based Optimization Framework for
Catalyst Dilution Applications in CO2‐Methanation Reactors. Chemie Ingenieur
Technik, Article e70162. https://doi.org/10.1002/cite.70162
bibtex: '@article{Schmücker_Riese_2026, title={Model‐Based Optimization Framework
for Catalyst Dilution Applications in CO2‐Methanation Reactors}, DOI={10.1002/cite.70162},
number={e70162}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Schmücker,
Torben and Riese, Julia}, year={2026} }'
chicago: Schmücker, Torben, and Julia Riese. “Model‐Based Optimization Framework
for Catalyst Dilution Applications in CO2‐Methanation Reactors.” Chemie Ingenieur
Technik, 2026. https://doi.org/10.1002/cite.70162.
ieee: 'T. Schmücker and J. Riese, “Model‐Based Optimization Framework for Catalyst
Dilution Applications in CO2‐Methanation Reactors,” Chemie Ingenieur Technik,
Art. no. e70162, 2026, doi: 10.1002/cite.70162.'
mla: Schmücker, Torben, and Julia Riese. “Model‐Based Optimization Framework for
Catalyst Dilution Applications in CO2‐Methanation Reactors.” Chemie Ingenieur
Technik, e70162, Wiley, 2026, doi:10.1002/cite.70162.
short: T. Schmücker, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-08-20T15:44:11Z
date_updated: 2026-08-21T06:09:31Z
department:
- _id: '831'
doi: 10.1002/cite.70162
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Model‐Based Optimization Framework for Catalyst Dilution Applications in CO2‐Methanation
Reactors
type: journal_article
user_id: '111274'
year: '2026'
...
---
_id: '66444'
article_number: '124635'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Dechert C, Riese J, Kenig E. A comprehensive numerical study of the wetting
behavior in structured packings with a direct consideration of the packing microstructure.
Chemical Engineering Science. Published online 2026. doi:10.1016/j.ces.2026.124635
apa: Dechert, C., Riese, J., & Kenig, E. (2026). A comprehensive numerical study
of the wetting behavior in structured packings with a direct consideration of
the packing microstructure. Chemical Engineering Science, Article 124635.
https://doi.org/10.1016/j.ces.2026.124635
bibtex: '@article{Dechert_Riese_Kenig_2026, title={A comprehensive numerical study
of the wetting behavior in structured packings with a direct consideration of
the packing microstructure}, DOI={10.1016/j.ces.2026.124635},
number={124635}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Dechert, Christopher and Riese, Julia and Kenig, Eugeny}, year={2026}
}'
chicago: Dechert, Christopher, Julia Riese, and Eugeny Kenig. “A Comprehensive Numerical
Study of the Wetting Behavior in Structured Packings with a Direct Consideration
of the Packing Microstructure.” Chemical Engineering Science, 2026. https://doi.org/10.1016/j.ces.2026.124635.
ieee: 'C. Dechert, J. Riese, and E. Kenig, “A comprehensive numerical study of the
wetting behavior in structured packings with a direct consideration of the packing
microstructure,” Chemical Engineering Science, Art. no. 124635, 2026, doi:
10.1016/j.ces.2026.124635.'
mla: Dechert, Christopher, et al. “A Comprehensive Numerical Study of the Wetting
Behavior in Structured Packings with a Direct Consideration of the Packing Microstructure.”
Chemical Engineering Science, 124635, Elsevier BV, 2026, doi:10.1016/j.ces.2026.124635.
short: C. Dechert, J. Riese, E. Kenig, Chemical Engineering Science (2026).
date_created: 2026-07-13T06:21:30Z
date_updated: 2026-07-13T06:22:12Z
department:
- _id: '831'
doi: 10.1016/j.ces.2026.124635
language:
- iso: eng
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A comprehensive numerical study of the wetting behavior in structured packings
with a direct consideration of the packing microstructure
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '62937'
abstract:
- lang: eng
text: Sandwich packings are assembled from two conventional structured packings
with different geometrical surface areas stacked alternatingly within a separation
column. When operated under partially flooded conditions, they provide significant
mass transfer improvement compared to common structured packings. In this work,
a rate-based model including novel mass transfer correlations is presented and
validated using a comprehensive experimental database for the reactive absorption
of CO2 into aqueous monoethanolamine. The proposed rate-based approach is capable
of accounting for axial dispersion, thereby enabling the evaluation of the effect
of liquid-phase backmixing on the mass transfer performance. The validated rate-based
model is used to evaluate the separation performance of sandwich packings. Compared
with structured packings, up to 10 % higher mass transfer rates are obtained.
article_number: '122681'
article_type: original
author:
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Uwe
full_name: Hampel, Uwe
last_name: Hampel
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: Franke P, Schubert M, Hampel U, Kenig EY. A rate-based model for reactive separation
columns with sandwich packings. Chemical Engineering Science. 2025;321.
doi:10.1016/j.ces.2025.122681
apa: Franke, P., Schubert, M., Hampel, U., & Kenig, E. Y. (2025). A rate-based
model for reactive separation columns with sandwich packings. Chemical Engineering
Science, 321, Article 122681. https://doi.org/10.1016/j.ces.2025.122681
bibtex: '@article{Franke_Schubert_Hampel_Kenig_2025, title={A rate-based model for
reactive separation columns with sandwich packings}, volume={321}, DOI={10.1016/j.ces.2025.122681},
number={122681}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Franke, Patrick and Schubert, Markus and Hampel, Uwe and Kenig, Eugeny
Y.}, year={2025} }'
chicago: Franke, Patrick, Markus Schubert, Uwe Hampel, and Eugeny Y. Kenig. “A Rate-Based
Model for Reactive Separation Columns with Sandwich Packings.” Chemical Engineering
Science 321 (2025). https://doi.org/10.1016/j.ces.2025.122681.
ieee: 'P. Franke, M. Schubert, U. Hampel, and E. Y. Kenig, “A rate-based model for
reactive separation columns with sandwich packings,” Chemical Engineering Science,
vol. 321, Art. no. 122681, 2025, doi: 10.1016/j.ces.2025.122681.'
mla: Franke, Patrick, et al. “A Rate-Based Model for Reactive Separation Columns
with Sandwich Packings.” Chemical Engineering Science, vol. 321, 122681,
Elsevier BV, 2025, doi:10.1016/j.ces.2025.122681.
short: P. Franke, M. Schubert, U. Hampel, E.Y. Kenig, Chemical Engineering Science
321 (2025).
date_created: 2025-12-08T07:40:18Z
date_updated: 2025-12-08T07:45:19Z
department:
- _id: '831'
doi: 10.1016/j.ces.2025.122681
intvolume: ' 321'
keyword:
- Sandwich packings Structured packings Rate-based approach Model validation Ultra-fast
X-ray tomography
language:
- iso: eng
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A rate-based model for reactive separation columns with sandwich packings
type: journal_article
user_id: '93922'
volume: 321
year: '2025'
...
---
_id: '58539'
author:
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Uwe
full_name: Hampel, Uwe
last_name: Hampel
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Franke P, Schubert M, Hampel U, Kenig EY. Modeling reactive absorption in
sandwich packings. In: Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025. ; 2025.'
apa: Franke, P., Schubert, M., Hampel, U., & Kenig, E. Y. (2025). Modeling reactive
absorption in sandwich packings. Proceedings of the Dechema/VDI Jahrestreffen
Fluidverfahrenstechnik 2025. Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025, Bochum.
bibtex: '@inproceedings{Franke_Schubert_Hampel_Kenig_2025, title={Modeling reactive
absorption in sandwich packings}, booktitle={Proceedings of the Dechema/VDI Jahrestreffen
Fluidverfahrenstechnik 2025}, author={Franke, Patrick and Schubert, Markus and
Hampel, Uwe and Kenig, Eugeny Y.}, year={2025} }'
chicago: Franke, Patrick, Markus Schubert, Uwe Hampel, and Eugeny Y. Kenig. “Modeling
Reactive Absorption in Sandwich Packings.” In Proceedings of the Dechema/VDI
Jahrestreffen Fluidverfahrenstechnik 2025, 2025.
ieee: P. Franke, M. Schubert, U. Hampel, and E. Y. Kenig, “Modeling reactive absorption
in sandwich packings,” presented at the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik
2025, Bochum, 2025.
mla: Franke, Patrick, et al. “Modeling Reactive Absorption in Sandwich Packings.”
Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025,
2025.
short: 'P. Franke, M. Schubert, U. Hampel, E.Y. Kenig, in: Proceedings of the Dechema/VDI
Jahrestreffen Fluidverfahrenstechnik 2025, 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025
start_date: 2025-02-03
date_created: 2025-02-07T11:34:54Z
date_updated: 2025-02-07T11:35:07Z
ddc:
- '620'
department:
- _id: '831'
file:
- access_level: closed
content_type: application/pdf
creator: frankep
date_created: 2025-02-07T11:33:55Z
date_updated: 2025-02-07T11:33:55Z
file_id: '58540'
file_name: FVT2025_Abstract_Franke.pdf
file_size: 154922
relation: main_file
success: 1
file_date_updated: 2025-02-07T11:33:55Z
has_accepted_license: '1'
language:
- iso: eng
publication: Proceedings of the Dechema/VDI Jahrestreffen Fluidverfahrenstechnik 2025
status: public
title: Modeling reactive absorption in sandwich packings
type: conference_abstract
user_id: '93922'
year: '2025'
...
---
_id: '58672'
article_number: '103960'
author:
- first_name: Mohamad
full_name: Al Trjman, Mohamad
id: '65415'
last_name: Al Trjman
- first_name: Alexander Heinrich Johannes
full_name: Salten, Alexander Heinrich Johannes
id: '59551'
last_name: Salten
orcid: 0000-0003-3069-9601
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Al Trjman M, Salten AHJ, Beule F, et al. Viscous fingering in adhesive bonding.
International Journal of Adhesion and Adhesives. 2025;139. doi:10.1016/j.ijadhadh.2025.103960
apa: Al Trjman, M., Salten, A. H. J., Beule, F., Teutenberg, D., Meschut, G., Riese,
J., & Kenig, E. (2025). Viscous fingering in adhesive bonding. International
Journal of Adhesion and Adhesives, 139, Article 103960. https://doi.org/10.1016/j.ijadhadh.2025.103960
bibtex: '@article{Al Trjman_Salten_Beule_Teutenberg_Meschut_Riese_Kenig_2025, title={Viscous
fingering in adhesive bonding}, volume={139}, DOI={10.1016/j.ijadhadh.2025.103960},
number={103960}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Al Trjman, Mohamad and Salten, Alexander Heinrich Johannes and Beule,
Felix and Teutenberg, Dominik and Meschut, Gerson and Riese, Julia and Kenig,
Eugeny}, year={2025} }'
chicago: Al Trjman, Mohamad, Alexander Heinrich Johannes Salten, Felix Beule, Dominik
Teutenberg, Gerson Meschut, Julia Riese, and Eugeny Kenig. “Viscous Fingering
in Adhesive Bonding.” International Journal of Adhesion and Adhesives 139
(2025). https://doi.org/10.1016/j.ijadhadh.2025.103960.
ieee: 'M. Al Trjman et al., “Viscous fingering in adhesive bonding,” International
Journal of Adhesion and Adhesives, vol. 139, Art. no. 103960, 2025, doi: 10.1016/j.ijadhadh.2025.103960.'
mla: Al Trjman, Mohamad, et al. “Viscous Fingering in Adhesive Bonding.” International
Journal of Adhesion and Adhesives, vol. 139, 103960, Elsevier BV, 2025, doi:10.1016/j.ijadhadh.2025.103960.
short: M. Al Trjman, A.H.J. Salten, F. Beule, D. Teutenberg, G. Meschut, J. Riese,
E. Kenig, International Journal of Adhesion and Adhesives 139 (2025).
date_created: 2025-02-17T19:39:31Z
date_updated: 2025-02-21T12:10:51Z
department:
- _id: '9'
- _id: '831'
doi: 10.1016/j.ijadhadh.2025.103960
intvolume: ' 139'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Viscous fingering in adhesive bonding
type: journal_article
user_id: '101499'
volume: 139
year: '2025'
...
---
_id: '58759'
article_number: '121317'
author:
- first_name: Christopher
full_name: Dechert, Christopher
last_name: Dechert
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
last_name: Kenig
citation:
ama: 'Dechert C, Kenig EY. Influence of microstructures on liquid spreading on inclined
plates: A CFD based study. Chemical Engineering Science. Published online
2025. doi:10.1016/j.ces.2025.121317'
apa: 'Dechert, C., & Kenig, E. Y. (2025). Influence of microstructures on liquid
spreading on inclined plates: A CFD based study. Chemical Engineering Science,
Article 121317. https://doi.org/10.1016/j.ces.2025.121317'
bibtex: '@article{Dechert_Kenig_2025, title={Influence of microstructures on liquid
spreading on inclined plates: A CFD based study}, DOI={10.1016/j.ces.2025.121317},
number={121317}, journal={Chemical Engineering Science}, publisher={Elsevier BV},
author={Dechert, Christopher and Kenig, Eugeny Y.}, year={2025} }'
chicago: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures
on Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 2025. https://doi.org/10.1016/j.ces.2025.121317.'
ieee: 'C. Dechert and E. Y. Kenig, “Influence of microstructures on liquid spreading
on inclined plates: A CFD based study,” Chemical Engineering Science, Art.
no. 121317, 2025, doi: 10.1016/j.ces.2025.121317.'
mla: 'Dechert, Christopher, and Eugeny Y. Kenig. “Influence of Microstructures on
Liquid Spreading on Inclined Plates: A CFD Based Study.” Chemical Engineering
Science, 121317, Elsevier BV, 2025, doi:10.1016/j.ces.2025.121317.'
short: C. Dechert, E.Y. Kenig, Chemical Engineering Science (2025).
date_created: 2025-02-21T12:23:00Z
date_updated: 2025-02-21T12:32:19Z
department:
- _id: '831'
doi: 10.1016/j.ces.2025.121317
extern: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://doi.org/10.1016/j.ces.2025.121317
status: public
title: 'Influence of microstructures on liquid spreading on inclined plates: A CFD
based study'
type: journal_article
user_id: '69828'
year: '2025'
...
---
_id: '58761'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
- first_name: Patrick
full_name: Franke, Patrick
id: '93922'
last_name: Franke
citation:
ama: 'Dechert C, Riese J, Franke P. Untersuchung zur Vergleichbarkeit von verschiedenen
Methoden zur Bestimmung der effektiven Phasengrenzflächen. In: ; 2025.'
apa: Dechert, C., Riese, J., & Franke, P. (2025). Untersuchung zur Vergleichbarkeit
von verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen.
Jahrestagung der Fachgruppe FLuidverfahrenstechnik, Bochum.
bibtex: '@inproceedings{Dechert_Riese_Franke_2025, title={Untersuchung zur Vergleichbarkeit
von verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen},
author={Dechert, Christopher and Riese, Julia and Franke, Patrick}, year={2025}
}'
chicago: Dechert, Christopher, Julia Riese, and Patrick Franke. “Untersuchung Zur
Vergleichbarkeit von Verschiedenen Methoden Zur Bestimmung Der Effektiven Phasengrenzflächen,”
2025.
ieee: C. Dechert, J. Riese, and P. Franke, “Untersuchung zur Vergleichbarkeit von
verschiedenen Methoden zur Bestimmung der effektiven Phasengrenzflächen,” presented
at the Jahrestagung der Fachgruppe FLuidverfahrenstechnik, Bochum, 2025.
mla: Dechert, Christopher, et al. Untersuchung Zur Vergleichbarkeit von Verschiedenen
Methoden Zur Bestimmung Der Effektiven Phasengrenzflächen. 2025.
short: 'C. Dechert, J. Riese, P. Franke, in: 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Jahrestagung der Fachgruppe FLuidverfahrenstechnik
start_date: 2025-02-03
date_created: 2025-02-21T12:36:20Z
date_updated: 2025-02-21T12:38:25Z
department:
- _id: '831'
extern: '1'
language:
- iso: eng
project:
- _id: '52'
name: 'PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing'
status: public
title: Untersuchung zur Vergleichbarkeit von verschiedenen Methoden zur Bestimmung
der effektiven Phasengrenzflächen
type: conference_abstract
user_id: '69828'
year: '2025'
...
---
_id: '58762'
author:
- first_name: Christopher
full_name: Dechert, Christopher
id: '69828'
last_name: Dechert
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: 'Dechert C, Riese J. Bewertung des Potentiales der Elektrobenetzung für Trennkolonnen.
In: ; 2025.'
apa: Dechert, C., & Riese, J. (2025). Bewertung des Potentiales der Elektrobenetzung
für Trennkolonnen. Jahrestreffen der Fachgruppe Fluidverfahrenstechnik, Bochum.
bibtex: '@inproceedings{Dechert_Riese_2025, title={Bewertung des Potentiales der
Elektrobenetzung für Trennkolonnen}, author={Dechert, Christopher and Riese, Julia},
year={2025} }'
chicago: Dechert, Christopher, and Julia Riese. “Bewertung Des Potentiales Der Elektrobenetzung
Für Trennkolonnen,” 2025.
ieee: C. Dechert and J. Riese, “Bewertung des Potentiales der Elektrobenetzung für
Trennkolonnen,” presented at the Jahrestreffen der Fachgruppe Fluidverfahrenstechnik,
Bochum, 2025.
mla: Dechert, Christopher, and Julia Riese. Bewertung Des Potentiales Der Elektrobenetzung
Für Trennkolonnen. 2025.
short: 'C. Dechert, J. Riese, in: 2025.'
conference:
end_date: 2025-02-05
location: Bochum
name: Jahrestreffen der Fachgruppe Fluidverfahrenstechnik
start_date: 2025-02-03
date_created: 2025-02-21T12:38:03Z
date_updated: 2025-02-21T12:38:28Z
department:
- _id: '831'
language:
- iso: eng
status: public
title: Bewertung des Potentiales der Elektrobenetzung für Trennkolonnen
type: conference_abstract
user_id: '69828'
year: '2025'
...
---
_id: '58165'
article_number: '131436'
author:
- first_name: Maximilian
full_name: Neumann, Maximilian
last_name: Neumann
- first_name: Marc
full_name: Xia, Marc
last_name: Xia
- first_name: René
full_name: Pöschmann, René
last_name: Pöschmann
- first_name: Amelie
full_name: Merkel, Amelie
last_name: Merkel
- first_name: Rolf
full_name: Staud, Rolf
last_name: Staud
- first_name: Hannes
full_name: Schneider, Hannes
last_name: Schneider
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Jürgen
full_name: Paschold, Jürgen
last_name: Paschold
- first_name: Steffen
full_name: Müller, Steffen
last_name: Müller
- first_name: Laura-Selin
full_name: Harding, Laura-Selin
last_name: Harding
- first_name: Johannes
full_name: Neukäufer, Johannes
last_name: Neukäufer
- first_name: Christoph
full_name: Hiller, Christoph
last_name: Hiller
- first_name: Ilja
full_name: Ausner, Ilja
last_name: Ausner
- first_name: Ansor
full_name: Gäbler, Ansor
last_name: Gäbler
- first_name: Reiner
full_name: Chromik, Reiner
last_name: Chromik
- first_name: Jan
full_name: Maćkowiak, Jan
last_name: Maćkowiak
- first_name: Jerzy
full_name: Maćkowiak, Jerzy
last_name: Maćkowiak
- first_name: Jose Luis
full_name: Sola Cervera, Jose Luis
last_name: Sola Cervera
- first_name: Christian
full_name: Geipel, Christian
last_name: Geipel
- first_name: Jost
full_name: Brinkmann, Jost
last_name: Brinkmann
- first_name: Jürgen
full_name: Bausa, Jürgen
last_name: Bausa
- first_name: Sebastian
full_name: Zeck, Sebastian
last_name: Zeck
- first_name: Mark
full_name: Hapke, Mark
last_name: Hapke
- first_name: Florian
full_name: Forner, Florian
last_name: Forner
- first_name: Florian
full_name: Habla, Florian
last_name: Habla
- first_name: Manuel
full_name: Knaup, Manuel
last_name: Knaup
- first_name: Robin
full_name: Schulz, Robin
last_name: Schulz
- first_name: Michael
full_name: Schultes, Michael
last_name: Schultes
- first_name: Thomas
full_name: Harlacher, Thomas
last_name: Harlacher
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Katharina
full_name: Jasch, Katharina
last_name: Jasch
- first_name: Mandy
full_name: Paschetag, Mandy
last_name: Paschetag
- first_name: Stephan
full_name: Scholl, Stephan
last_name: Scholl
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Georg
full_name: Brösigke, Georg
last_name: Brösigke
- first_name: Jens-Uwe
full_name: Repke, Jens-Uwe
last_name: Repke
- first_name: Harald
full_name: Klein, Harald
last_name: Klein
- first_name: Sebastian
full_name: Rehfeldt, Sebastian
last_name: Rehfeldt
citation:
ama: 'Neumann M, Xia M, Pöschmann R, et al. Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology. 2025;361. doi:10.1016/j.seppur.2025.131436'
apa: 'Neumann, M., Xia, M., Pöschmann, R., Merkel, A., Staud, R., Schneider, H.,
Ehlert, T., Paschold, J., Müller, S., Harding, L.-S., Neukäufer, J., Hiller, C.,
Ausner, I., Gäbler, A., Chromik, R., Maćkowiak, J., Maćkowiak, J., Sola Cervera,
J. L., Geipel, C., … Rehfeldt, S. (2025). Towards reliable HETP values: Lessons
learned from standardized separation efficiency measurements. Separation and
Purification Technology, 361, Article 131436. https://doi.org/10.1016/j.seppur.2025.131436'
bibtex: '@article{Neumann_Xia_Pöschmann_Merkel_Staud_Schneider_Ehlert_Paschold_Müller_Harding_et
al._2025, title={Towards reliable HETP values: Lessons learned from standardized
separation efficiency measurements}, volume={361}, DOI={10.1016/j.seppur.2025.131436},
number={131436}, journal={Separation and Purification Technology}, publisher={Elsevier
BV}, author={Neumann, Maximilian and Xia, Marc and Pöschmann, René and Merkel,
Amelie and Staud, Rolf and Schneider, Hannes and Ehlert, Thomas and Paschold,
Jürgen and Müller, Steffen and Harding, Laura-Selin and et al.}, year={2025} }'
chicago: 'Neumann, Maximilian, Marc Xia, René Pöschmann, Amelie Merkel, Rolf Staud,
Hannes Schneider, Thomas Ehlert, et al. “Towards Reliable HETP Values: Lessons
Learned from Standardized Separation Efficiency Measurements.” Separation and
Purification Technology 361 (2025). https://doi.org/10.1016/j.seppur.2025.131436.'
ieee: 'M. Neumann et al., “Towards reliable HETP values: Lessons learned
from standardized separation efficiency measurements,” Separation and Purification
Technology, vol. 361, Art. no. 131436, 2025, doi: 10.1016/j.seppur.2025.131436.'
mla: 'Neumann, Maximilian, et al. “Towards Reliable HETP Values: Lessons Learned
from Standardized Separation Efficiency Measurements.” Separation and Purification
Technology, vol. 361, 131436, Elsevier BV, 2025, doi:10.1016/j.seppur.2025.131436.'
short: M. Neumann, M. Xia, R. Pöschmann, A. Merkel, R. Staud, H. Schneider, T. Ehlert,
J. Paschold, S. Müller, L.-S. Harding, J. Neukäufer, C. Hiller, I. Ausner, A.
Gäbler, R. Chromik, J. Maćkowiak, J. Maćkowiak, J.L. Sola Cervera, C. Geipel,
J. Brinkmann, J. Bausa, S. Zeck, M. Hapke, F. Forner, F. Habla, M. Knaup, R. Schulz,
M. Schultes, T. Harlacher, N. Lutters, E. Kenig, K. Jasch, M. Paschetag, S. Scholl,
M. Grünewald, G. Brösigke, J.-U. Repke, H. Klein, S. Rehfeldt, Separation and
Purification Technology 361 (2025).
date_created: 2025-01-13T11:35:51Z
date_updated: 2025-02-28T07:57:11Z
department:
- _id: '9'
- _id: '145'
- _id: '831'
doi: 10.1016/j.seppur.2025.131436
intvolume: ' 361'
language:
- iso: eng
publication: Separation and Purification Technology
publication_identifier:
issn:
- 1383-5866
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Towards reliable HETP values: Lessons learned from standardized separation
efficiency measurements'
type: journal_article
user_id: '22006'
volume: 361
year: '2025'
...