@article{21823,
  author       = {{Han, Daxin and Yang, Keke and Meschut, Gerson}},
  issn         = {{0924-0136}},
  journal      = {{Journal of Materials Processing Technology}},
  title        = {{{Mechanical joining of glass fibre reinforced polymer (GFRP) through an innovative solid self-piercing rivet}}},
  doi          = {{10.1016/j.jmatprotec.2021.117182}},
  year         = {{2021}},
}

@article{29168,
  abstract     = {{<jats:title>Abstract</jats:title><jats:p>The homogeneous density of the liquid phase is experimentally investigated for methyl diethanolamine. Data are obtained along five isotherms in a temperature range between 300 K and 360 K for pressures up to 95 MPa. Two different apparatuses are used to measure the speed of sound for the temperatures between 322 K and 450 K with a maximum pressure of 95 MPa. These measurements and literature data are used to develop a fundamental equation of state for methyl diethanolamine. The model is formulated in terms of the Helmholtz energy and allows for the calculation of all thermodynamic properties in gaseous, liquid, supercritical, and saturation states. The experimental data are represented within their uncertainties. The physical and extrapolation behavior is validated qualitatively to ensure reasonable calculations outside of the range of validity. Based on the experimental datasets, the equation of state is valid for temperatures from 250 K to 750 K and pressures up to 100 MPa.</jats:p>}},
  author       = {{Neumann, Tobias and Baumhögger, Elmar and Span, Roland and Vrabec, Jadran and Thol, Monika}},
  issn         = {{0195-928X}},
  journal      = {{International Journal of Thermophysics}},
  keywords     = {{Condensed Matter Physics}},
  number       = {{1}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{Thermodynamic Properties of Methyl Diethanolamine}}},
  doi          = {{10.1007/s10765-021-02933-7}},
  volume       = {{43}},
  year         = {{2021}},
}

@techreport{29807,
  author       = {{Linnig, Caterina and Tröster, Thomas}},
  publisher    = {{Deutsche Bundesstiftung Umwelt (DBU)}},
  title        = {{{Entwicklung eines neuartigen Reinigungsverfahrens für recycelte Kohlenstofffasern}}},
  year         = {{2021}},
}

@inproceedings{29812,
  abstract     = {{Aluminum-steel clad composites are used as structural elements in car bodies and chases as well as in the chemical industry due to a combination of high strength of steel, low density of Al and high corrosion resistance of both materials. An important parameter influencing mechanical properties of the composite is the microstructure of the bonding region between Al and steel layer. During manufacturing of the final product, clad sheets can be subjected to elevated temperatures which enhance diffusion between the metals. As a result, a brittle intermetallic phase, deteriorating the bond strength between steel and aluminum, forms at the interface. This paper focuses on study of the interfacial microstructure in a twin-roll cast Al-steel clad strip and its evolution during in-situ annealing in transmission electron microscope. Due to isochronal annealing above 500 °C, Al5Fe2 phase forms at the interface. Nucleation centers formed at the beginning of heating experiment expand and form continuous layer. The kinetics of the growth follows the parabolic law typical for diffusion-controlled phase transformations.}},
  author       = {{Křivská, Barbora and Šlapáková, Michaela and Minárik, Peter and Fekete, Klaudia and Králík, Rostislav and Stolbchenko, Mykhailo and Schaper, Mirko and Grydin, Olexandr}},
  booktitle    = {{APPLIED PHYSICS OF CONDENSED MATTER (APCOM 2021)}},
  issn         = {{0094-243X}},
  location     = {{Online}},
  publisher    = {{AIP Publishing}},
  title        = {{{In-situ TEM observation of intermetallic phase growth in Al-steel clad sheet}}},
  doi          = {{10.1063/5.0067491}},
  year         = {{2021}},
}

@inproceedings{21560,
  author       = {{Beule, Felix and Teutenberg, Dominik and Meschut, Gerson and Aubel, Tobias and Matzenmiller, Anton}},
  booktitle    = {{21. Kolloquium: Gemeinsame Forschung in der Klebtechnik}},
  title        = {{{Methodenentwicklung zur Versagensanalyse aufgrund der Aushärtung vorgeschädigter Klebverbindungen in stahlintensiven Mischbaustrukturen}}},
  year         = {{2021}},
}

@inproceedings{30227,
  author       = {{Klippstein, Sven Helge}},
  location     = {{Tudolstadt}},
  title        = {{{Online Monitoring des Beschichtungsprozesses im Laser Sintern, Systementwicklung und Einflussanalyse}}},
  year         = {{2021}},
}

@inproceedings{25283,
  author       = {{Moritzer, Elmar and Hecker, Felix and Elsner, Christian Lennart and Hirsch, André}},
  booktitle    = {{Proceedings of  36th Annual Meeting of Polymer Processing Society (PPS-36)}},
  location     = {{Montreal, Canada}},
  title        = {{{Influences of Temperature-Dependent Boundary Conditions on Component Properties in Arburg Plastic Freeforming}}},
  year         = {{2021}},
}

@inproceedings{26829,
  author       = {{Bothe, Mike and Fedorov, Alexander and Frei, Herrmann and Kenig, Eugeny}},
  location     = {{Shanghai, China (online)}},
  title        = {{{Modeling and investigations of chemical absorption process for prevention of emergencies }}},
  year         = {{2021}},
}

@inproceedings{20807,
  author       = {{Bielak, Christian Roman and Böhnke, Max and Bobbert, Mathias and Meschut, Gerson}},
  location     = {{Lüttich}},
  title        = {{{Further development of a numerical method for analyzing the load capacity of clinched joints in versatile process chains}}},
  doi          = {{10.25518/esaform21.4298}},
  year         = {{2021}},
}

@article{30652,
  abstract     = {{Clinching continuous fibre reinforced thermoplastic composites and metals is challenging due to the low ductility of the composite material. Therefore, a number of novel clinching technologies has been developed specifically for these material combinations. A systematic overview of these advanced clinching methods is given in the present paper. With a focus on process design, three selected clinching methods suitable for different joining tasks are described in detail. The clinching processes including equipment and tools, observed process phenomena and the resultant material structure are compared. Process phenomena during joining are explained in general and compared using computed tomography and micrograph images for each process. In addition the load bearing behaviour and the corresponding failure mechanisms are investigated by means of single-lap shear tests. Finally, the new joining technologies are discussed regarding application relevant criteria.}},
  author       = {{Gröger, B. and Troschitz, J. and Vorderbrüggen, J. and Vogel, C. and Kupfer, R. and Meschut, G. and Gude, M.}},
  journal      = {{Materials}},
  pages        = {{2286}},
  title        = {{{Clinching of Thermoplastic Composites and Metals—A Comparison of Three Novel Joining Technologies}}},
  doi          = {{10.3390/ma14092286X}},
  volume       = {{14}},
  year         = {{2021}},
}

@article{23948,
  author       = {{Moritzer, Elmar and Richters, Maximilian and Hillemeyer, Johannes and Krassmann, Dimitri}},
  journal      = {{Joining Plastics}},
  title        = {{{Mit dem Schraubblind-Durchsetznieten Metallteile mit Composites bei einseitiger Zugänglichkeit verbinden}}},
  year         = {{2021}},
}

@article{23886,
  author       = {{Kastein, Mara and Finke, Josefine and Horwath, Ilona}},
  issn         = {{2196-3886}},
  journal      = {{Voluntaris}},
  pages        = {{135--151}},
  title        = {{{Florian braucht Mehmet mehr als umgekehrt: Herausforderungen und Potenziale für Inklusion in der Freiwilligen Feuerwehr}}},
  doi          = {{10.5771/2196-3886-2021-1-135}},
  year         = {{2021}},
}

@misc{24446,
  booktitle    = {{Erscheinungsformen, Erklärungsversuche und Gegenstrategien, GENDER }},
  editor       = {{Kastein, Mara and Horwath, Ilona and Finke, Josefine and Duglar Sezer, Nilgün}},
  pages        = {{92--107}},
  title        = {{{Ohne den ‚Weissen Mann‘ würden Leute wie Sie noch in Erdhöhlen wohnen.“ - Die Markierung der Unmarkierten}}},
  doi          = {{doi.org/10.3224/84742528.01}},
  year         = {{2021}},
}

@inbook{24477,
  author       = {{Horwath, Ilona and Kastein, Mara and Duglar Sezer, Nilgün}},
  booktitle    = {{Feuerwehren im Spiegel gesellschaftlicher Diversität}},
  editor       = {{Duglar Sezer, Nilgün and Horwath, Ilona and Kastein, Mara}},
  title        = {{{Feuerwehren im Spiegel gesellschaftlicher Diversität}}},
  year         = {{2021}},
}

@article{24172,
  abstract     = {{In dem Artikel werden die Metaphern gleichstellungsorientierter Männerpolitik als eine Form diskursiver Praktiken untersucht. In meiner Dissertation habe ich die Metaphernanalyse ergänzend zur Grounded-Theory-Methodologie und zur wissenssoziologischen Diskursanalyse genutzt, um die Ergebnisse zu verdichten und zu vertiefen. Dabei stellt die Metaphorik der gleichstellungsorientierten Männerpolitik selbige als instabil, schwankend, balancierend und uneinig dar, denn sie wird als schwankendes Schiff, welches ohne feste Route auf dem Meer schaukelt, imaginiert. Das Meer ist die Gesellschaft bzw. die übergeordnete Gleichstellungspolitik. Diese wird als unberechenbar und launisch konzipiert, und die gleichstellungsorientierte Männerpolitik erscheint dabei als ausgeliefert.}},
  author       = {{Kastein, Mara}},
  journal      = {{ Forum Qualitative Sozialforschung}},
  title        = {{{Das schwankende Schiff der Männerpolitik: eine Metaphernanalyse}}},
  doi          = {{10.17169/FQS-22.2.3597}},
  year         = {{2021}},
}

@misc{24175,
  booktitle    = {{Gender a výzkum / Gender and Research}},
  editor       = {{Alemann, v.Annette and Gruhlich, Julia and Horwath, Ilona and Weber, Lena}},
  issn         = {{2570-6578}},
  pages        = {{86--102}},
  title        = {{{International Perspectives about COVID-19, Digital Labour and Gender Work Pattern: A Collective Interview}}},
  doi          = {{10.13060/gav.2020.014}},
  year         = {{2021}},
}

@misc{24173,
  booktitle    = {{Gender a výzkum / Gender and Research}},
  editor       = {{Alemann, v. Annette and Gruhlich, Julia and Horwath, Ilona and Weber, Lena}},
  issn         = {{2570-6578}},
  pages        = {{3--12}},
  title        = {{{A Plea to Reflect on the Entanglements of Gendered Work Patterns and Digital Technologies}}},
  doi          = {{10.13060/gav.2020.009}},
  year         = {{2021}},
}

@article{25476,
  abstract     = {{This study deals with the damage behavior of metallic materials by the application of different manufacturing processes and using different optical measurement methods to identify the crack initiation in the damage specimen. The study is intended to highlight the importance of considering manufacturing processes and optical measurement methods in a numerical simulation when analyzing the damage behavior of metallic materials. To describe the damage behavior of the material in the process chain simulations, it is important to calibrate the parameters of damage model more accurately. These parameters are determined using experimental investigation of desired damage specimens. In this regard, a selected damage specimen manufactured by different cutting processes is first experimentally and then numerically investigated. It is shown that the manufacturing process and the optical measurement methods influence the stress state analyzed in the numerical simulation.}},
  author       = {{Otroshi, Mortaza and Meschut, Gerson and Nesakumar, Aathavan}},
  journal      = {{Journal of Manufacturing Engineering}},
  keywords     = {{Damage behaviour, Stress triaxiality, Manufacturing process and Optical measurement}},
  number       = {{3}},
  pages        = {{70--76}},
  title        = {{{The influence of manufacturing processes and optical measurement methods on the damage behavior of HX340LAD micro-alloyed steels}}},
  doi          = {{https://doi.org/10.37255/jme.v16i3pp070-076}},
  volume       = {{16}},
  year         = {{2021}},
}

@book{22032,
  abstract     = {{The Arburg Plastic Freeforming (APF) is an additive manufacturing process which allows the production of three-dimensional thermoplastic components in layers. The components are produced by depositing fine, molten plastic droplets. The main advantage of the APF is the open-parameter control of the associated machine system. Thus, the process parameters can be optimized for individual applications. A special and new application of the APF is the production of interconnecting porous structures. As this is a novel approach with this manufacturing process, the general producibility and reproducibility must first be proven. Therefore, the relevant process parameters with an influence on the open-pored structures are identified. The volume of the individual plastic droplets, the distance between the droplets and the layer thickness are the three decisive influencing factors. With the use of analysis methods, the free spaces created in the structure are described by a uniformly constructed, interconnected pore structure. This means that the pores are interconnected in three dimensions. Reproducibility is evaluated by repeated production and thru the changed conditions during the manufacturing process. In addition, the multiplication and a change of geometry are evaluated in such a way that there is no influence on the pore size. Irregularities when depositing the first layer are caused by unevenness of the building platform. A suitable test arrangement is set up to determine the liquid permeability. A characteristic value is determined to describe the permeability to liquids.}},
  author       = {{Moritzer, Elmar and Hirsch, André and Dalmer, C.}},
  isbn         = {{978-3-030-54333-4}},
  pages        = {{112--129}},
  publisher    = {{Springer}},
  title        = {{{Investigation of Plastic Freeformed, Open-Pored Structures with Regard to Producibility, Reproducibility and Liquid Permeability}}},
  doi          = {{10.1007/978-3-030-54334-1}},
  year         = {{2021}},
}

@article{24162,
  author       = {{Moritzer, Elmar and Wächter, Julian and Elsner, Christian Lennart}},
  journal      = {{Macromolecular Symposia}},
  number       = {{1}},
  publisher    = {{Wiley}},
  title        = {{{Investigation of Specific FDM Process Parameters to Optimize the Polymer Discharge of Carbon Fiber Reinforced PEEK}}},
  doi          = {{10.1002/masy.202000269}},
  volume       = {{395}},
  year         = {{2021}},
}