@inproceedings{22396, abstract = {{Additive manufacturing offers many technical and economical benefits. In order to profit from these benefits, it is necessary to consider the manufacturing limits and restrictions. This applies in particular to the geometrical accuracy. Therefore, the achievable geometrical accuracy needs to be investigated, which enables the determination of realistic tolerances. Thus, two different aims are considered. The first aim is the determination of dimensional tolerances that can be stated if additive manufacturing is used under normal workshop conditions. Within the second aim, relevant process parameters and manufacturing influences will be optimized in order to reduce dimensional deviations. To achieve both aims a method was developed first. This method identifies relevant influential factors on the geometrical accuracy for the processes Fused Deposition Modeling (FDM), Laser Sintering (LS) and Laser Melting (LM). Factors were selected that are expected to affect the geometrical accuracy mainly. The first investigations deal with measuring linear dimensions on a designed test specimen and the derivation of achievable dimensional tolerances. This paper will present both, the developed method and the first results of the experimental investigations.}}, author = {{Lieneke, Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick and Josupeit, Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar}}, booktitle = {{26th Annual International Solid Freeform Fabrication Symposium}}, pages = {{371--384}}, title = {{{Systematical determination of tolerances for additive manufacturing by measuring linear dimensions}}}, doi = {{https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions}}, volume = {{26}}, year = {{2015}}, } @phdthesis{22397, author = {{Adam, Guido}}, isbn = {{978-3-8440-3474-5}}, publisher = {{Shaker Verlag}}, title = {{{Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling}}}, year = {{2015}}, } @inproceedings{22398, author = {{Adam, Guido}}, booktitle = {{Inside 3D Printing Conference and Expo}}, title = {{{On tolerances for additive manufacturing}}}, year = {{2015}}, } @inproceedings{22399, author = {{Lieneke, Tobias}}, booktitle = {{Rapid Tech 2015}}, title = {{{Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren}}}, year = {{2015}}, } @inproceedings{22400, author = {{Lieneke, Tobias}}, booktitle = {{26th Annual International Solid Freeform Fabrication Symposium}}, title = {{{Systematical determination of dimensional tolerances for additive manufacturing }}}, volume = {{26}}, year = {{2015}}, } @article{22401, author = {{Hölscher, Christian and Strop, Malte and Zimmer, Detmar}}, isbn = {{0373-3300}}, journal = {{Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe }}, number = {{1-2}}, pages = {{55--66}}, publisher = {{Springer-VDI-Verlag }}, title = {{{Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme}}}, volume = {{67}}, year = {{2015}}, } @phdthesis{22402, author = {{Wiehe, Ansgar}}, isbn = {{978-3-86247-541-4}}, publisher = {{Der Andere Verlag}}, title = {{{Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen}}}, year = {{2015}}, } @misc{22530, author = {{Zimmer, Detmar and Nolte, Karsten and Hütte, Jürgen}}, title = {{{Wellendichtsysteme}}}, year = {{2015}}, } @inproceedings{23055, author = {{Abrishamchian, Farisoroosh and Oestersötebier, Felix and Trächtler, Ansgar}}, booktitle = {{Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition}}, publisher = {{ASME}}, title = {{{Feature Model Approach For Managing Variability of Dynamic Behavior Models in Mechatronic Systems}}}, year = {{2015}}, } @inproceedings{23056, author = {{Bertelsmeier, Fabian and Trächtler, Ansgar}}, booktitle = {{20th IEEE International Conference on Emerging Technologies and Factory Automation}}, title = {{{Decentralized Controller Reconfiguration Strategies for Hybrid System Dynamics based on Product-Intelligence}}}, year = {{2015}}, } @inproceedings{23057, author = {{Abdelgawad, Kareem and Hassan, Bassem and Kohlstedt, Andreas and Stöcklein, Jörg and Berssenbrügge, Jan and Grafe, Michael and Gausemeier, Sandra and Jäker, Karl-Peter and Trächtler, Ansgar}}, booktitle = {{New Developments in Driving Simulation Design and Experiments}}, publisher = {{Driving Simulation Conference}}, title = {{{Flexible Operation Workflow of a Driving Simulation Center for ADAS Development}}}, year = {{2015}}, } @inproceedings{23058, author = {{Hassan, Bassem and Stöcklein, Jörg and Berssenbrügge, Jan}}, booktitle = {{Virtual, Augmented and Mixed Reality VAMR 2015 Held as Part of HCI International 2015}}, editor = {{Shumaker, Randall and Lackey, Stephanie}}, pages = {{457 -- 469}}, publisher = {{Springer International Publishing Switzerland}}, title = {{{ARTiST - An Augmented Reality Testbed for Intelligent Technical Systems}}}, year = {{2015}}, } @inproceedings{23059, author = {{Berssenbrügge, Jan and Trächtler, Ansgar and Schmidt, Christoph}}, booktitle = {{Proceedings of the ASME 2015 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference}}, title = {{{Visualization of Headlight Illumination for the Virtual Prototyping of Light-Based Driver Assistance Systems}}}, year = {{2015}}, } @article{23060, author = {{Krüger, Martin and Trächtler, Ansgar}}, journal = {{at-Automatisierungstechnik}}, number = {{8}}, pages = {{633 -- 645}}, title = {{{Parametrische Modellordnungsreduktion für hierarchische selbstoptimierende Systeme}}}, volume = {{63}}, year = {{2015}}, } @inproceedings{23062, author = {{Bertelsmeier, Fabian and Vathauer, Marc and Henke, Christian and Vathauer, Karl-Ernst and Trächtler, Ansgar}}, booktitle = {{Automation 2015}}, publisher = {{VDI-Verlag}}, title = {{{Produkt- und lastabhängiges dezentrales Motormanagement für die Fördertechnik: Anforderungen, Design und Applikation }}}, year = {{2015}}, } @inproceedings{23063, author = {{Pai, Arathi and Niendorf, Thomas and Krooß, Philipp and Koke, Isabel and Trächtler, Ansgar and Schaper, Mirko}}, booktitle = {{7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART}}, title = {{{Modelling the Constitutive Behaviour of Martensite and Austenite in Shape Memory Alloys Using Closed-Form Analytical Continuous Equations}}}, year = {{2015}}, } @article{23064, author = {{Damerow, Ulf-Hendrik and Borsig, Michael and Tabakajew, Dmitri and Schaermann, Waldemar and Hesse, Marc and Homberg, Werner and Trächtler, Ansgar and Jungeblut, Thorsten}}, journal = {{wt Werkstattstechnik online}}, pages = {{427--432}}, title = {{{Intelligente Biegeverfahren}}}, volume = {{6-2015}}, year = {{2015}}, } @inproceedings{23065, author = {{Abdelgawad, Kareem and Hassan, Bassem and Berssenbrügge, Jan and Stöcklein, Jörg and Grafe, Michael}}, booktitle = {{International Journal On Advances in Software}}, pages = {{247 -- 261}}, publisher = {{IARIA}}, title = {{{A Modular Architecture of an Interactive Simulation and Training Environment for Advanced Driver Assistance Systems}}}, volume = {{8}}, year = {{2015}}, } @article{23066, author = {{Shareef, Zeeshan and Just, Viktor and Teichrieb, Heinrich and Trächtler, Ansgar}}, journal = {{Robotica}}, pages = {{1--17}}, title = {{{Design and Control of Cooperative Ball Juggling Delta Robots without Visual Guidance}}}, year = {{2015}}, } @inproceedings{23068, author = {{Jähn, Claudius and Fischer, Matthias and Gerges, Maria and Berssenbrügge, Jan}}, booktitle = {{12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung}}, pages = {{107--120}}, publisher = {{Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}}, title = {{{Automatische Ableitung geometrischer Eigenschaften von Bauteilen aus dem 3-D-Polygonmodell}}}, volume = {{342}}, year = {{2015}}, }