[{"abstract":[{"lang":"eng","text":"With the increasing amount of data in collaborative engineering research, the need for effective and efficient data management is growing. This paper uses a maturity-based process model to examine the implementation of research data management (RDM) in engineering projects. A process model visualizes a research-supported implementation of RDM and helps researchers evaluate their data management strategies through maturity level assessment. For this approach, activities are assigned to different maturity levels based on a maturity level characteristic providing a differentiated view of the implementation of RDM. An example from an ongoing project shows the application and support of the developed maturity-based process model. The work emphasizes the importance of standardized and quality-assured data management for the success of research projects and their contribution to the scientific community</jats:p>"}],"publication":"Proceedings of the Design Society","department":[{"_id":"741"}],"type":"journal_article","date_created":"2025-12-01T14:02:52Z","intvolume":"         5","date_updated":"2026-02-20T13:00:47Z","publication_status":"published","author":[{"full_name":"Wawer, Max Leo","last_name":"Wawer","first_name":"Max Leo"},{"id":"44605","last_name":"Müller","first_name":"Laura","full_name":"Müller, Laura"},{"full_name":"Khaled, Jaouhar Ben","first_name":"Jaouhar Ben","last_name":"Khaled"},{"first_name":"Timo","last_name":"Stauß","full_name":"Stauß, Timo"},{"full_name":"Wurst, Johanna","first_name":"Johanna","last_name":"Wurst"},{"first_name":"Iryna","last_name":"Mozgova","full_name":"Mozgova, Iryna","id":"95903"},{"first_name":"Roland","last_name":"Lachmayer","full_name":"Lachmayer, Roland"}],"publication_identifier":{"issn":["2732-527X"]},"title":"A maturity based data management integration in engineering research projects","year":"2025","doi":"10.1017/pds.2025.10031","language":[{"iso":"eng"}],"quality_controlled":"1","citation":{"short":"M.L. Wawer, L. Müller, J.B. Khaled, T. Stauß, J. Wurst, I. Mozgova, R. Lachmayer, Proceedings of the Design Society 5 (2025) 169–178.","chicago":"Wawer, Max Leo, Laura Müller, Jaouhar Ben Khaled, Timo Stauß, Johanna Wurst, Iryna Mozgova, and Roland Lachmayer. “A Maturity Based Data Management Integration in Engineering Research Projects.” <i>Proceedings of the Design Society</i> 5 (2025): 169–78. <a href=\"https://doi.org/10.1017/pds.2025.10031\">https://doi.org/10.1017/pds.2025.10031</a>.","ieee":"M. L. Wawer <i>et al.</i>, “A maturity based data management integration in engineering research projects,” <i>Proceedings of the Design Society</i>, vol. 5, pp. 169–178, 2025, doi: <a href=\"https://doi.org/10.1017/pds.2025.10031\">10.1017/pds.2025.10031</a>.","apa":"Wawer, M. L., Müller, L., Khaled, J. B., Stauß, T., Wurst, J., Mozgova, I., &#38; Lachmayer, R. (2025). A maturity based data management integration in engineering research projects. <i>Proceedings of the Design Society</i>, <i>5</i>, 169–178. <a href=\"https://doi.org/10.1017/pds.2025.10031\">https://doi.org/10.1017/pds.2025.10031</a>","bibtex":"@article{Wawer_Müller_Khaled_Stauß_Wurst_Mozgova_Lachmayer_2025, title={A maturity based data management integration in engineering research projects}, volume={5}, DOI={<a href=\"https://doi.org/10.1017/pds.2025.10031\">10.1017/pds.2025.10031</a>}, journal={Proceedings of the Design Society}, publisher={Cambridge University Press (CUP)}, author={Wawer, Max Leo and Müller, Laura and Khaled, Jaouhar Ben and Stauß, Timo and Wurst, Johanna and Mozgova, Iryna and Lachmayer, Roland}, year={2025}, pages={169–178} }","ama":"Wawer ML, Müller L, Khaled JB, et al. A maturity based data management integration in engineering research projects. <i>Proceedings of the Design Society</i>. 2025;5:169-178. doi:<a href=\"https://doi.org/10.1017/pds.2025.10031\">10.1017/pds.2025.10031</a>","mla":"Wawer, Max Leo, et al. “A Maturity Based Data Management Integration in Engineering Research Projects.” <i>Proceedings of the Design Society</i>, vol. 5, Cambridge University Press (CUP), 2025, pp. 169–78, doi:<a href=\"https://doi.org/10.1017/pds.2025.10031\">10.1017/pds.2025.10031</a>."},"status":"public","volume":5,"user_id":"44605","publisher":"Cambridge University Press (CUP)","_id":"62727","page":"169-178"},{"department":[{"_id":"741"}],"type":"conference","place":"Cham","date_created":"2025-12-01T14:12:55Z","quality_controlled":"1","citation":{"mla":"Müller, Laura, et al. “Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse.” <i>IFIP Advances in Information and Communication Technology</i>, Springer Nature Switzerland, 2025, pp. 140–50, doi:<a href=\"https://doi.org/10.1007/978-3-032-09704-0_14\">10.1007/978-3-032-09704-0_14</a>.","ama":"Müller L, Hinterthaner M, Ortlieb E, et al. Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse. In: <i>IFIP Advances in Information and Communication Technology</i>. Springer Nature Switzerland; 2025:140-150. doi:<a href=\"https://doi.org/10.1007/978-3-032-09704-0_14\">10.1007/978-3-032-09704-0_14</a>","bibtex":"@inproceedings{Müller_Hinterthaner_Ortlieb_Mohnfeld_Schultz_Uhe_Koepler_Mozgova_2025, place={Cham}, title={Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse}, DOI={<a href=\"https://doi.org/10.1007/978-3-032-09704-0_14\">10.1007/978-3-032-09704-0_14</a>}, booktitle={IFIP Advances in Information and Communication Technology}, publisher={Springer Nature Switzerland}, author={Müller, Laura and Hinterthaner, Marc and Ortlieb, Eduard and Mohnfeld, Norman and Schultz, Andreas Maximilian and Uhe, Johanna and Koepler, Oliver and Mozgova, Iryna}, year={2025}, pages={140–150} }","apa":"Müller, L., Hinterthaner, M., Ortlieb, E., Mohnfeld, N., Schultz, A. M., Uhe, J., Koepler, O., &#38; Mozgova, I. (2025). Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse. <i>IFIP Advances in Information and Communication Technology</i>, 140–150. <a href=\"https://doi.org/10.1007/978-3-032-09704-0_14\">https://doi.org/10.1007/978-3-032-09704-0_14</a>","ieee":"L. Müller <i>et al.</i>, “Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse,” in <i>IFIP Advances in Information and Communication Technology</i>, 2025, pp. 140–150, doi: <a href=\"https://doi.org/10.1007/978-3-032-09704-0_14\">10.1007/978-3-032-09704-0_14</a>.","chicago":"Müller, Laura, Marc Hinterthaner, Eduard Ortlieb, Norman Mohnfeld, Andreas Maximilian Schultz, Johanna Uhe, Oliver Koepler, and Iryna Mozgova. “Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse.” In <i>IFIP Advances in Information and Communication Technology</i>, 140–50. Cham: Springer Nature Switzerland, 2025. <a href=\"https://doi.org/10.1007/978-3-032-09704-0_14\">https://doi.org/10.1007/978-3-032-09704-0_14</a>.","short":"L. Müller, M. Hinterthaner, E. Ortlieb, N. Mohnfeld, A.M. Schultz, J. Uhe, O. Koepler, I. Mozgova, in: IFIP Advances in Information and Communication Technology, Springer Nature Switzerland, Cham, 2025, pp. 140–150."},"publication":"IFIP Advances in Information and Communication Technology","doi":"10.1007/978-3-032-09704-0_14","user_id":"44605","language":[{"iso":"eng"}],"_id":"62728","publisher":"Springer Nature Switzerland","page":"140-150","date_updated":"2026-02-20T13:01:07Z","publication_status":"published","author":[{"id":"44605","first_name":"Laura","last_name":"Müller","full_name":"Müller, Laura"},{"last_name":"Hinterthaner","first_name":"Marc","full_name":"Hinterthaner, Marc"},{"full_name":"Ortlieb, Eduard","last_name":"Ortlieb","first_name":"Eduard"},{"full_name":"Mohnfeld, Norman","last_name":"Mohnfeld","first_name":"Norman"},{"first_name":"Andreas Maximilian","last_name":"Schultz","full_name":"Schultz, Andreas Maximilian","id":"40599"},{"full_name":"Uhe, Johanna","last_name":"Uhe","first_name":"Johanna"},{"last_name":"Koepler","first_name":"Oliver","full_name":"Koepler, Oliver"},{"first_name":"Iryna","last_name":"Mozgova","full_name":"Mozgova, Iryna","id":"95903"}],"publication_identifier":{"isbn":["9783032097033","9783032097040"],"issn":["1868-4238","1868-422X"]},"title":"Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse","year":"2025","status":"public"},{"user_id":"44605","doi":"10.5281/ZENODO.17670597","_id":"63716","publisher":"LibreCat University","date_updated":"2026-02-20T13:01:20Z","author":[{"id":"40599","full_name":"Schultz, Andreas Maximilian","first_name":"Andreas Maximilian","last_name":"Schultz"},{"id":"95903","first_name":"Iryna","last_name":"Mozgova","full_name":"Mozgova, Iryna"},{"id":"109175","first_name":"Osman","last_name":"Altun","full_name":"Altun, Osman"},{"full_name":"Karras, Oliver","last_name":"Karras","first_name":"Oliver"},{"full_name":"Koepler, Oliver","first_name":"Oliver","last_name":"Koepler"},{"id":"44605","full_name":"Müller, Laura","last_name":"Müller","first_name":"Laura"},{"last_name":"Nuenberger","first_name":"Florian","full_name":"Nuenberger, Florian"},{"full_name":"Röwenstrunk, Daniel","orcid":"https://orcid.org/0000-0001-6271-2095","first_name":"Daniel","last_name":"Röwenstrunk","id":"439"},{"first_name":"Max Leo","last_name":"Wawer","full_name":"Wawer, Max Leo"}],"year":"2025","title":"Strukturierte FDM-Plattformen: Aktuelle Lösungen und Herausforderungen in Informationsinfrastrukturprojekten","status":"public","department":[{"_id":"741"}],"type":"research_data","date_created":"2026-01-23T09:22:38Z","citation":{"short":"A.M. Schultz, I. Mozgova, O. Altun, O. Karras, O. Koepler, L. Müller, F. Nuenberger, D. Röwenstrunk, M.L. Wawer, Strukturierte FDM-Plattformen: Aktuelle Lösungen Und Herausforderungen in Informationsinfrastrukturprojekten, LibreCat University, 2025.","ama":"Schultz AM, Mozgova I, Altun O, et al. <i>Strukturierte FDM-Plattformen: Aktuelle Lösungen Und Herausforderungen in Informationsinfrastrukturprojekten</i>. LibreCat University; 2025. doi:<a href=\"https://doi.org/10.5281/ZENODO.17670597\">10.5281/ZENODO.17670597</a>","chicago":"Schultz, Andreas Maximilian, Iryna Mozgova, Osman Altun, Oliver Karras, Oliver Koepler, Laura Müller, Florian Nuenberger, Daniel Röwenstrunk, and Max Leo Wawer. <i>Strukturierte FDM-Plattformen: Aktuelle Lösungen Und Herausforderungen in Informationsinfrastrukturprojekten</i>. LibreCat University, 2025. <a href=\"https://doi.org/10.5281/ZENODO.17670597\">https://doi.org/10.5281/ZENODO.17670597</a>.","bibtex":"@book{Schultz_Mozgova_Altun_Karras_Koepler_Müller_Nuenberger_Röwenstrunk_Wawer_2025, title={Strukturierte FDM-Plattformen: Aktuelle Lösungen und Herausforderungen in Informationsinfrastrukturprojekten}, DOI={<a href=\"https://doi.org/10.5281/ZENODO.17670597\">10.5281/ZENODO.17670597</a>}, publisher={LibreCat University}, author={Schultz, Andreas Maximilian and Mozgova, Iryna and Altun, Osman and Karras, Oliver and Koepler, Oliver and Müller, Laura and Nuenberger, Florian and Röwenstrunk, Daniel and Wawer, Max Leo}, year={2025} }","apa":"Schultz, A. M., Mozgova, I., Altun, O., Karras, O., Koepler, O., Müller, L., Nuenberger, F., Röwenstrunk, D., &#38; Wawer, M. L. (2025). <i>Strukturierte FDM-Plattformen: Aktuelle Lösungen und Herausforderungen in Informationsinfrastrukturprojekten</i>. LibreCat University. <a href=\"https://doi.org/10.5281/ZENODO.17670597\">https://doi.org/10.5281/ZENODO.17670597</a>","mla":"Schultz, Andreas Maximilian, et al. <i>Strukturierte FDM-Plattformen: Aktuelle Lösungen Und Herausforderungen in Informationsinfrastrukturprojekten</i>. LibreCat University, 2025, doi:<a href=\"https://doi.org/10.5281/ZENODO.17670597\">10.5281/ZENODO.17670597</a>.","ieee":"A. M. Schultz <i>et al.</i>, <i>Strukturierte FDM-Plattformen: Aktuelle Lösungen und Herausforderungen in Informationsinfrastrukturprojekten</i>. LibreCat University, 2025."}},{"quality_controlled":"1","citation":{"short":"L. Hermelingmeier, D. Teutenberg, G. Meschut, in: 2025.","chicago":"Hermelingmeier, Lucas, Dominik Teutenberg, and Gerson Meschut. “Application of Distributed Fiber Optic Sensing for Defect Detection in Adhesive Bonds,” 2025.","ieee":"L. Hermelingmeier, D. Teutenberg, and G. Meschut, “Application of distributed fiber optic sensing for defect detection in adhesive bonds,” presented at the AB2025 8th International Conference on Adhesive Bonding 2025, Porto, Portugal, 2025.","apa":"Hermelingmeier, L., Teutenberg, D., &#38; Meschut, G. (2025). <i>Application of distributed fiber optic sensing for defect detection in adhesive bonds</i>. AB2025 8th International Conference on Adhesive Bonding 2025, Porto, Portugal.","bibtex":"@inproceedings{Hermelingmeier_Teutenberg_Meschut_2025, title={Application of distributed fiber optic sensing for defect detection in adhesive bonds}, author={Hermelingmeier, Lucas and Teutenberg, Dominik and Meschut, Gerson}, year={2025} }","ama":"Hermelingmeier L, Teutenberg D, Meschut G. Application of distributed fiber optic sensing for defect detection in adhesive bonds. In: ; 2025.","mla":"Hermelingmeier, Lucas, et al. <i>Application of Distributed Fiber Optic Sensing for Defect Detection in Adhesive Bonds</i>. 2025."},"type":"conference_abstract","department":[{"_id":"157"}],"date_created":"2025-07-15T11:18:52Z","date_updated":"2026-02-23T08:24:48Z","title":"Application of distributed fiber optic sensing for defect detection in adhesive bonds","status":"public","year":"2025","conference":{"start_date":"2025-07-10","name":"AB2025 8th International Conference on Adhesive Bonding 2025","location":"Porto, Portugal","end_date":"2025-07-11"},"author":[{"full_name":"Hermelingmeier, Lucas","first_name":"Lucas","last_name":"Hermelingmeier","id":"58649"},{"full_name":"Teutenberg, Dominik","first_name":"Dominik","last_name":"Teutenberg","id":"537"},{"full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","id":"32056"}],"user_id":"537","language":[{"iso":"eng"}],"_id":"60623"},{"department":[{"_id":"157"}],"type":"book","date_created":"2025-12-24T09:21:18Z","quality_controlled":"1","citation":{"bibtex":"@book{Meschut_Yang_Rethmeier_El-Sari_2025, title={Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz}, author={Meschut, Gerson and Yang, Keke and Rethmeier, Michael and El-Sari, Bassel}, year={2025} }","ama":"Meschut G, Yang K, Rethmeier M, El-Sari B. <i>Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz</i>.; 2025.","mla":"Meschut, Gerson, et al. <i>Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz</i>. 2025.","chicago":"Meschut, Gerson, Keke Yang, Michael Rethmeier, and Bassel El-Sari. <i>Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz</i>, 2025.","short":"G. Meschut, K. Yang, M. Rethmeier, B. El-Sari, Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz, 2025.","ieee":"G. Meschut, K. Yang, M. Rethmeier, and B. El-Sari, <i>Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz</i>. 2025.","apa":"Meschut, G., Yang, K., Rethmeier, M., &#38; El-Sari, B. (2025). <i>Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz</i>."},"user_id":"65085","_id":"63411","language":[{"iso":"ger"}],"publication_status":"published","date_updated":"2026-02-23T10:26:51Z","author":[{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"},{"first_name":"Keke","orcid":"0000-0001-9201-9304","last_name":"Yang","full_name":"Yang, Keke","id":"65085"},{"full_name":"Rethmeier, Michael","first_name":"Michael","last_name":"Rethmeier"},{"full_name":"El-Sari, Bassel","first_name":"Bassel","last_name":"El-Sari"}],"publication_identifier":{"isbn":["978-3-96780-219-1"]},"year":"2025","title":"Entwicklung eines methodischen Ansatzes zur Vermeidung der Spritzerbildung beim Widerstandspunktschweißen durch multiparametrische Prozessanalyse mittels künstlicher Intelligenz","status":"public"},{"author":[{"id":"83727","last_name":"Buczek","first_name":"Moritz","full_name":"Buczek, Moritz"},{"last_name":"Duffe","first_name":"Tobias","full_name":"Duffe, Tobias","id":"41322"},{"full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter","id":"291"},{"first_name":"Karina","last_name":"Tews","full_name":"Tews, Karina","id":"40263"},{"id":"537","last_name":"Teutenberg","first_name":"Dominik","full_name":"Teutenberg, Dominik"},{"orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056"}],"conference":{"end_date":"2025-02-19","location":"Köln","start_date":"2025-02-18","name":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik "},"title":"Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden","status":"public","year":"2025","date_updated":"2026-02-23T11:44:14Z","_id":"58878","language":[{"iso":"eng"}],"user_id":"537","citation":{"chicago":"Buczek, Moritz, Tobias Duffe, Gunter Kullmer, Karina Tews, Dominik Teutenberg, and Gerson Meschut. “Bruchmechanisches Schnittebenenkonzept Zur Lebensdauergerechten Auslegung von Hyperelastischen Klebverbindungen Bei Multiaxialen Und Variablen Belastungsamplituden.” In <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, 2025.","short":"M. Buczek, T. Duffe, G. Kullmer, K. Tews, D. Teutenberg, G. Meschut, in: 25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2025.","ieee":"M. Buczek, T. Duffe, G. Kullmer, K. Tews, D. Teutenberg, and G. Meschut, “Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden,” presented at the 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik , Köln, 2025.","apa":"Buczek, M., Duffe, T., Kullmer, G., Tews, K., Teutenberg, D., &#38; Meschut, G. (2025). Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden. <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik , Köln.","bibtex":"@inproceedings{Buczek_Duffe_Kullmer_Tews_Teutenberg_Meschut_2025, title={Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden}, booktitle={25. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Buczek, Moritz and Duffe, Tobias and Kullmer, Gunter and Tews, Karina and Teutenberg, Dominik and Meschut, Gerson}, year={2025} }","ama":"Buczek M, Duffe T, Kullmer G, Tews K, Teutenberg D, Meschut G. Bruchmechanisches Schnittebenenkonzept zur lebensdauergerechten Auslegung von hyperelastischen Klebverbindungen bei multiaxialen und variablen Belastungsamplituden. In: <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. ; 2025.","mla":"Buczek, Moritz, et al. “Bruchmechanisches Schnittebenenkonzept Zur Lebensdauergerechten Auslegung von Hyperelastischen Klebverbindungen Bei Multiaxialen Und Variablen Belastungsamplituden.” <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, 2025."},"publication":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik","date_created":"2025-03-03T08:40:56Z","department":[{"_id":"157"},{"_id":"143"}],"type":"conference"},{"language":[{"iso":"eng"}],"_id":"58843","user_id":"537","title":"Berücksichtigung des Einflusses fertigungsinduzierter Vorverformungen warmaushärtender Klebstoffe auf die Schwingfestigkeit geklebter Verbindungen","status":"public","year":"2025","conference":{"end_date":"2025-02-19","location":"Köln","name":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik","start_date":"2025-02-18"},"author":[{"id":"66192","full_name":"Beule, Felix","last_name":"Beule","first_name":"Felix"},{"id":"537","first_name":"Dominik","last_name":"Teutenberg","full_name":"Teutenberg, Dominik"},{"full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson","id":"32056"}],"corporate_editor":["DECHEMA"],"date_updated":"2026-02-23T11:44:26Z","date_created":"2025-02-26T07:20:04Z","type":"conference","department":[{"_id":"157"}],"publication":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik","citation":{"chicago":"Beule, Felix, Dominik Teutenberg, and Gerson Meschut. “Berücksichtigung Des Einflusses Fertigungsinduzierter Vorverformungen Warmaushärtender Klebstoffe Auf Die Schwingfestigkeit Geklebter Verbindungen.” In <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025.","short":"F. Beule, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2025.","apa":"Beule, F., Teutenberg, D., &#38; Meschut, G. (2025). Berücksichtigung des Einflusses fertigungsinduzierter Vorverformungen warmaushärtender Klebstoffe auf die Schwingfestigkeit geklebter Verbindungen. In DECHEMA (Ed.), <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>.","ieee":"F. Beule, D. Teutenberg, and G. Meschut, “Berücksichtigung des Einflusses fertigungsinduzierter Vorverformungen warmaushärtender Klebstoffe auf die Schwingfestigkeit geklebter Verbindungen,” in <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, Köln, 2025.","ama":"Beule F, Teutenberg D, Meschut G. Berücksichtigung des Einflusses fertigungsinduzierter Vorverformungen warmaushärtender Klebstoffe auf die Schwingfestigkeit geklebter Verbindungen. In: DECHEMA, ed. <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. ; 2025.","bibtex":"@inproceedings{Beule_Teutenberg_Meschut_2025, title={Berücksichtigung des Einflusses fertigungsinduzierter Vorverformungen warmaushärtender Klebstoffe auf die Schwingfestigkeit geklebter Verbindungen}, booktitle={25. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Beule, Felix and Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2025} }","mla":"Beule, Felix, et al. “Berücksichtigung Des Einflusses Fertigungsinduzierter Vorverformungen Warmaushärtender Klebstoffe Auf Die Schwingfestigkeit Geklebter Verbindungen.” <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025."}},{"department":[{"_id":"157"}],"type":"conference","date_created":"2025-02-26T07:23:07Z","citation":{"ieee":"L. Schmelzle, F. Beule, G. Possart, D. Teutenberg, J. Mergheim, and G. Meschut, “Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter Crashbelastung,” in <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, Köln, 2025.","apa":"Schmelzle, L., Beule, F., Possart, G., Teutenberg, D., Mergheim, J., &#38; Meschut, G. (2025). Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter Crashbelastung. In DECHEMA (Ed.), <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>.","mla":"Schmelzle, Lars, et al. “Methodenentwicklung Zur Simulation von Hyperelastischen Klebverbindungen Unter Crashbelastung.” <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025.","bibtex":"@inproceedings{Schmelzle_Beule_Possart_Teutenberg_Mergheim_Meschut_2025, title={Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter Crashbelastung}, booktitle={25. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Schmelzle, Lars and Beule, Felix and Possart, Gunnar and Teutenberg, Dominik and Mergheim, Julia and Meschut, Gerson}, editor={DECHEMA}, year={2025} }","chicago":"Schmelzle, Lars, Felix Beule, Gunnar Possart, Dominik Teutenberg, Julia Mergheim, and Gerson Meschut. “Methodenentwicklung Zur Simulation von Hyperelastischen Klebverbindungen Unter Crashbelastung.” In <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025.","ama":"Schmelzle L, Beule F, Possart G, Teutenberg D, Mergheim J, Meschut G. Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter Crashbelastung. In: DECHEMA, ed. <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. ; 2025.","short":"L. Schmelzle, F. Beule, G. Possart, D. Teutenberg, J. Mergheim, G. Meschut, in: DECHEMA (Ed.), 25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2025."},"publication":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik","user_id":"537","_id":"58844","language":[{"iso":"eng"}],"date_updated":"2026-02-23T11:44:37Z","corporate_editor":["DECHEMA"],"author":[{"full_name":"Schmelzle, Lars","last_name":"Schmelzle","first_name":"Lars"},{"id":"66192","last_name":"Beule","first_name":"Felix","full_name":"Beule, Felix"},{"last_name":"Possart","first_name":"Gunnar","full_name":"Possart, Gunnar"},{"last_name":"Teutenberg","first_name":"Dominik","full_name":"Teutenberg, Dominik","id":"537"},{"full_name":"Mergheim, Julia","last_name":"Mergheim","first_name":"Julia"},{"id":"32056","orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut","full_name":"Meschut, Gerson"}],"conference":{"end_date":"2025-02-19","location":"Köln","start_date":"2025-02-18","name":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik"},"status":"public","title":"Methodenentwicklung zur Simulation von hyperelastischen Klebverbindungen unter Crashbelastung","year":"2025"},{"date_created":"2025-07-15T11:06:12Z","type":"conference_abstract","department":[{"_id":"157"}],"publication":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik","citation":{"apa":"Hermelingmeier, L., Teutenberg, D., &#38; Meschut, G. (2025). Methodenentwicklung zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen. In DECHEMA (Ed.), <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>.","ieee":"L. Hermelingmeier, D. Teutenberg, and G. Meschut, “Methodenentwicklung zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen,” in <i>25. Kolloquium: Gemeinsame Forschung in der Klebtechnik</i>, 2025.","short":"L. Hermelingmeier, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2025.","chicago":"Hermelingmeier, Lucas, Dominik Teutenberg, and Gerson Meschut. “Methodenentwicklung Zur Ermittlung Lokaler Klebschichtzustände Innerhalb Struktureller Verbindungen.” In <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025.","mla":"Hermelingmeier, Lucas, et al. “Methodenentwicklung Zur Ermittlung Lokaler Klebschichtzustände Innerhalb Struktureller Verbindungen.” <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, edited by DECHEMA, 2025.","ama":"Hermelingmeier L, Teutenberg D, Meschut G. Methodenentwicklung zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen. In: DECHEMA, ed. <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. ; 2025.","bibtex":"@inproceedings{Hermelingmeier_Teutenberg_Meschut_2025, title={Methodenentwicklung zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen}, booktitle={25. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hermelingmeier, Lucas and Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2025} }"},"language":[{"iso":"eng"}],"_id":"60615","user_id":"537","year":"2025","status":"public","title":"Methodenentwicklung zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen","conference":{"start_date":"2025-02-18","end_date":"2025-02-19"},"corporate_editor":["DECHEMA"],"author":[{"full_name":"Hermelingmeier, Lucas","first_name":"Lucas","last_name":"Hermelingmeier","id":"58649"},{"id":"537","full_name":"Teutenberg, Dominik","first_name":"Dominik","last_name":"Teutenberg"},{"id":"32056","last_name":"Meschut","first_name":"Gerson","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson"}],"date_updated":"2026-02-23T11:44:47Z"},{"_id":"64588","language":[{"iso":"eng"}],"user_id":"74308","author":[{"id":"74308","full_name":"Neubert, Fynn Lucas","first_name":"Fynn Lucas","orcid":"0009-0006-5243-4531","last_name":"Neubert"},{"full_name":"Teutenberg, Dominik","last_name":"Teutenberg","first_name":"Dominik","id":"537"},{"full_name":"Meschut, Gerson","last_name":"Meschut","first_name":"Gerson","orcid":"0000-0002-2763-1246","id":"32056"},{"first_name":"Maxim","last_name":"Rodschei","full_name":"Rodschei, Maxim"},{"full_name":"Mergheim, Julia","first_name":"Julia","last_name":"Mergheim"}],"conference":{"name":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik","start_date":"2025-02-18","location":"Köln","end_date":"2025-02-19"},"year":"2025","status":"public","title":"Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau","date_updated":"2026-02-23T13:30:24Z","date_created":"2026-02-23T13:20:30Z","department":[{"_id":"157"}],"type":"conference_abstract","citation":{"mla":"Neubert, Fynn Lucas, et al. “Experimentelle Und Numerische Untersuchungen Zur Alterung von Klebverbindungen Unter Zyklischer Und Hygrothermischer Beanspruchung Im Stahl- Und Anlagenbau.” <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, 2025.","ama":"Neubert FL, Teutenberg D, Meschut G, Rodschei M, Mergheim J. Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau. In: <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. ; 2025.","bibtex":"@inproceedings{Neubert_Teutenberg_Meschut_Rodschei_Mergheim_2025, title={Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau}, booktitle={25. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Neubert, Fynn Lucas and Teutenberg, Dominik and Meschut, Gerson and Rodschei, Maxim and Mergheim, Julia}, year={2025} }","apa":"Neubert, F. L., Teutenberg, D., Meschut, G., Rodschei, M., &#38; Mergheim, J. (2025). Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau. <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln.","ieee":"F. L. Neubert, D. Teutenberg, G. Meschut, M. Rodschei, and J. Mergheim, “Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau,” presented at the 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2025.","short":"F.L. Neubert, D. Teutenberg, G. Meschut, M. Rodschei, J. Mergheim, in: 25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2025.","chicago":"Neubert, Fynn Lucas, Dominik Teutenberg, Gerson Meschut, Maxim Rodschei, and Julia Mergheim. “Experimentelle Und Numerische Untersuchungen Zur Alterung von Klebverbindungen Unter Zyklischer Und Hygrothermischer Beanspruchung Im Stahl- Und Anlagenbau.” In <i>25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, 2025."},"publication":"25. Kolloquium: Gemeinsame Forschung in der Klebtechnik"},{"project":[{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"_id":"136","name":"TRR 285 – A02: TRR 285 - Subproject A02"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"quality_controlled":"1","citation":{"bibtex":"@article{Neuser_Schlichter_Hoyer_Bobbert_Meschut_Schaper_2025, title={Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys}, volume={408}, DOI={<a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>}, number={01081}, journal={44th Conference of the International Deep Drawing Research Group (IDDRG 2025)}, author={Neuser, Moritz and Schlichter, Malte Christian and Hoyer, Kay-Peter and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko}, year={2025} }","chicago":"Neuser, Moritz, Malte Christian Schlichter, Kay-Peter Hoyer, Mathias Bobbert, Gerson Meschut, and Mirko Schaper. “Mechanical Joinability of Microstructurally Graded Structural Components Manufactured from Hypoeutectic Aluminium Casting Alloys.” <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i> 408 (2025). <a href=\"https://doi.org/10.1051/matecconf/202540801081\">https://doi.org/10.1051/matecconf/202540801081</a>.","short":"M. Neuser, M.C. Schlichter, K.-P. Hoyer, M. Bobbert, G. Meschut, M. Schaper, 44th Conference of the International Deep Drawing Research Group (IDDRG 2025) 408 (2025).","ama":"Neuser M, Schlichter MC, Hoyer K-P, Bobbert M, Meschut G, Schaper M. Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys. <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>. 2025;408. doi:<a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>","ieee":"M. Neuser, M. C. Schlichter, K.-P. Hoyer, M. Bobbert, G. Meschut, and M. Schaper, “Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys,” <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>, vol. 408, Art. no. 01081, 2025, doi: <a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>.","apa":"Neuser, M., Schlichter, M. C., Hoyer, K.-P., Bobbert, M., Meschut, G., &#38; Schaper, M. (2025). Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys. <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>, <i>408</i>, Article 01081. <a href=\"https://doi.org/10.1051/matecconf/202540801081\">https://doi.org/10.1051/matecconf/202540801081</a>","mla":"Neuser, Moritz, et al. “Mechanical Joinability of Microstructurally Graded Structural Components Manufactured from Hypoeutectic Aluminium Casting Alloys.” <i>44th Conference of the International Deep Drawing Research Group (IDDRG 2025)</i>, vol. 408, 01081, 2025, doi:<a href=\"https://doi.org/10.1051/matecconf/202540801081\">10.1051/matecconf/202540801081</a>."},"oa":"1","conference":{"end_date":"2025-06-05","start_date":"2025-06-02","name":"44th Conference of the International Deep Drawing Research Group (IDDRG 2025)","location":"Lissabon (Portugal)"},"status":"public","volume":408,"user_id":"7850","_id":"59872","abstract":[{"lang":"eng","text":"Lightweight design is a driving concept in modern automotive engineering to minimize resource consumption over a vehicle's lifecycle through multi-material design, which relies on the use of joining techniques in car body fabrication. Multi-material design and the increasing trend towards producing large structural components using the megacasting process pose considerable challenges, particularly in the mechanical joining of aluminium-silicon (AlSi) castings. These castings typically exhibit low ductility and are prone to cracking when mechanically joined. Based on the excellent castability of hypoeutectic AlSi alloys, these are applied in sand casting and die casting as well as in megacasting. With a silicon content between 7 wt% and 12 wt%, these AlSi-alloys have a plate-like silicon phase that initiates cracks during mechanical joining. To enhance the joinability of castings, the research hypothesis is that improved solidification conditions enable a significant modification in the microstructure and therefore, increase the mechanical properties. During the manufacture of the castings using the sand casting process, the solidification conditions within the structural elements are varied to modify the microstructure to obtain castings with graded microstructure. The castings are evaluated using mechanical, microstructural and joining testing methods and finally, a microstructure-joinability correlation is established."}],"publication":"44th Conference of the International Deep Drawing Research Group (IDDRG 2025)","department":[{"_id":"43"},{"_id":"158"},{"_id":"157"},{"_id":"9"},{"_id":"321"}],"keyword":["Joining","Casting","Self-pierce riveting","Aluminium casting alloy"],"type":"journal_article","date_created":"2025-05-12T15:21:06Z","intvolume":"       408","article_type":"original","date_updated":"2026-02-24T13:41:58Z","publication_status":"published","author":[{"id":"32340","last_name":"Neuser","first_name":"Moritz","full_name":"Neuser, Moritz"},{"full_name":"Schlichter, Malte Christian","last_name":"Schlichter","first_name":"Malte Christian","id":"61977"},{"id":"48411","first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter"},{"id":"7850","full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias"},{"full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut","id":"32056"},{"id":"43720","full_name":"Schaper, Mirko","first_name":"Mirko","last_name":"Schaper"}],"year":"2025","title":"Mechanical joinability of microstructurally graded structural components manufactured from hypoeutectic aluminium casting alloys","doi":"10.1051/matecconf/202540801081","language":[{"iso":"eng"}],"main_file_link":[{"url":"\thttps://doi.org/10.1051/matecconf/202540801081","open_access":"1"}],"article_number":"01081"},{"type":"conference","department":[{"_id":"157"}],"date_created":"2025-08-22T10:20:15Z","abstract":[{"text":"In the development of advanced lightweight automotive solutions, self-piercing riveting (SPR) offers the possibility of joining multi-material structures to fulfil a wide variety of requirements. With regard to the entire process chain, production-related pre-deformations of the parts to be joined can influence the geometric shape and load capacity of SPR joints. Various studies have investigated the influence of pre-stretched sheet materials, in the sense of pre-drawing processes, on the formation of SPR joints. The impact of pre-stretching sheet metals on the formation of their geometrical characteristics and the shear-tensile strength of SPR processes was observed [1]. Pre-rolled semi-finished products are also joined together in mixed material automotive structures, e.g. tailor rolled blanks. This work aims to investigate the influence of pre-rolled joining parts on the geometric formation and load-carrying capacity of SPR joints. For this purpose, sheets of metal are cold-formed using a rolling process to induce a defined strain-hardening state in the material and then joined in various combinations. As the degree of deformation increases, the rolling of samples can lead to minimal accumulation of damage in the sheet materials, which can influence the joint behaviour. The rolling process, as well as the subsequent joining process, are also investigated by FEM. The influence of pre-rolled semi-finished products on the strength of the SPR joints is investigated.</jats:p>","lang":"eng"}],"publication":"Materials Research Proceedings","doi":"10.21741/9781644903599-148","language":[{"iso":"eng"}],"date_updated":"2026-02-24T14:02:01Z","publication_status":"published","intvolume":"        54","year":"2025","title":"Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints","publication_identifier":{"issn":["2474-395X"]},"author":[{"full_name":"Schlichter, Malte Christian","last_name":"Schlichter","first_name":"Malte Christian","id":"61977"},{"full_name":"Harabati, Özcan","first_name":"Özcan","last_name":"Harabati","id":"54972"},{"full_name":"Ludwig, Jean-Patrick","first_name":"Jean-Patrick","last_name":"Ludwig","id":"76631"},{"last_name":"Böhnke","first_name":"Max","full_name":"Böhnke, Max","id":"45779"},{"full_name":"Bielak, Christian Roman","first_name":"Christian Roman","last_name":"Bielak","id":"34782"},{"id":"7850","last_name":"Bobbert","first_name":"Mathias","full_name":"Bobbert, Mathias"},{"id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"quality_controlled":"1","project":[{"name":"TRR 285 - Subproject A01","_id":"135"},{"_id":"131","name":"TRR 285 - Project Area A"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"citation":{"short":"M.C. Schlichter, Ö. Harabati, J.-P. Ludwig, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","chicago":"Schlichter, Malte Christian, Özcan Harabati, Jean-Patrick Ludwig, Max Böhnke, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Experimental and Numerical Investigation of the Influence of Rolling-Induced Sheet Metal Deformation on SPR Joints.” In <i>Materials Research Proceedings</i>, Vol. 54. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903599-148\">https://doi.org/10.21741/9781644903599-148</a>.","apa":"Schlichter, M. C., Harabati, Ö., Ludwig, J.-P., Böhnke, M., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2025). Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints. <i>Materials Research Proceedings</i>, <i>54</i>. <a href=\"https://doi.org/10.21741/9781644903599-148\">https://doi.org/10.21741/9781644903599-148</a>","ieee":"M. C. Schlichter <i>et al.</i>, “Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints,” in <i>Materials Research Proceedings</i>, 2025, vol. 54, doi: <a href=\"https://doi.org/10.21741/9781644903599-148\">10.21741/9781644903599-148</a>.","ama":"Schlichter MC, Harabati Ö, Ludwig J-P, et al. Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints. In: <i>Materials Research Proceedings</i>. Vol 54. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903599-148\">10.21741/9781644903599-148</a>","bibtex":"@inproceedings{Schlichter_Harabati_Ludwig_Böhnke_Bielak_Bobbert_Meschut_2025, title={Experimental and numerical investigation of the influence of rolling-induced sheet metal deformation on SPR joints}, volume={54}, DOI={<a href=\"https://doi.org/10.21741/9781644903599-148\">10.21741/9781644903599-148</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Schlichter, Malte Christian and Harabati, Özcan and Ludwig, Jean-Patrick and Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2025} }","mla":"Schlichter, Malte Christian, et al. “Experimental and Numerical Investigation of the Influence of Rolling-Induced Sheet Metal Deformation on SPR Joints.” <i>Materials Research Proceedings</i>, vol. 54, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903599-148\">10.21741/9781644903599-148</a>."},"user_id":"7850","volume":54,"_id":"60977","publisher":"Materials Research Forum LLC","status":"public"},{"citation":{"apa":"Schlichter, M. C., Harabati, Ö., Böhnke, M., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2025). Investigation on manufacturing-induced pre-deformation on the fatigue behaviour of clinched joints. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-16\">https://doi.org/10.21741/9781644903551-16</a>","ieee":"M. C. Schlichter, Ö. Harabati, M. Böhnke, C. R. Bielak, M. Bobbert, and G. Meschut, “Investigation on manufacturing-induced pre-deformation on the fatigue behaviour of clinched joints,” in <i>Materials Research Proceedings</i>, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-16\">10.21741/9781644903551-16</a>.","chicago":"Schlichter, Malte Christian, Özcan Harabati, Max Böhnke, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Investigation on Manufacturing-Induced Pre-Deformation on the Fatigue Behaviour of Clinched Joints.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-16\">https://doi.org/10.21741/9781644903551-16</a>.","short":"M.C. Schlichter, Ö. Harabati, M. Böhnke, C.R. Bielak, M. Bobbert, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","mla":"Schlichter, Malte Christian, et al. “Investigation on Manufacturing-Induced Pre-Deformation on the Fatigue Behaviour of Clinched Joints.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-16\">10.21741/9781644903551-16</a>.","ama":"Schlichter MC, Harabati Ö, Böhnke M, Bielak CR, Bobbert M, Meschut G. Investigation on manufacturing-induced pre-deformation on the fatigue behaviour of clinched joints. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-16\">10.21741/9781644903551-16</a>","bibtex":"@inproceedings{Schlichter_Harabati_Böhnke_Bielak_Bobbert_Meschut_2025, title={Investigation on manufacturing-induced pre-deformation on the fatigue behaviour of clinched joints}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-16\">10.21741/9781644903551-16</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Schlichter, Malte Christian and Harabati, Özcan and Böhnke, Max and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2025} }"},"quality_controlled":"1","project":[{"_id":"131","name":"TRR 285 - Project Area A"},{"_id":"135","name":"TRR 285 - Subproject A01"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"publisher":"Materials Research Forum LLC","_id":"60978","user_id":"7850","volume":52,"status":"public","date_created":"2025-08-22T10:45:56Z","type":"conference","department":[{"_id":"157"}],"publication":"Materials Research Proceedings","abstract":[{"lang":"eng","text":"The present study is an experimental analysis of the influence of pre-forming on the failure behaviour of clinched specimens under quasi-static and cyclic loading conditions. In this context, the geometric formation of the clinched joints is taken into account, with regard to the loading behaviour. The study also includes a comparison of the failure behaviour of quasi-static and cyclic tested specimen. Testing is done on non-pre-deformed and pre-deformed specimens. For this purpose, experimental investigations are carried out on two material combinations consisting of HCT590X steel sheet and EN AW-6014 T4 aluminium sheet. The focus is on the fatigue analysis of the clinched joints. The aim is to identify the failure modes under cyclic loading and the crack formation with regard to forming operations prior to the joining process. The investigations show that the cyclic load-bearing behaviour of the HCT590X joints is reduced by introducing a plastic pre-deformation of the to be joined parts.</jats:p>"}],"language":[{"iso":"eng"}],"doi":"10.21741/9781644903551-16","title":"Investigation on manufacturing-induced pre-deformation on the fatigue behaviour of clinched joints","year":"2025","publication_identifier":{"issn":["2474-395X"]},"author":[{"id":"61977","full_name":"Schlichter, Malte Christian","first_name":"Malte Christian","last_name":"Schlichter"},{"full_name":"Harabati, Özcan","first_name":"Özcan","last_name":"Harabati","id":"54972"},{"id":"45779","full_name":"Böhnke, Max","last_name":"Böhnke","first_name":"Max"},{"id":"34782","full_name":"Bielak, Christian Roman","last_name":"Bielak","first_name":"Christian Roman"},{"full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias","id":"7850"},{"last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson"}],"date_updated":"2026-02-24T14:02:35Z","publication_status":"published","intvolume":"        52"},{"date_created":"2025-04-15T11:14:53Z","department":[{"_id":"157"}],"type":"conference","publication":"Materials Research Proceedings","abstract":[{"text":"Abstract. As a widely used sheet metal in clinched joints within the automotive industry, the aluminum alloy EN AW-6014 has been the focus of numerous studies. High-cycle fatigue (HCF) is a critical aspect when assessing the durability of clinched joints. In the present work, the HCF behavior of EN AW-6014 T4 was explored both experimentally and numerically. To model the fatigue behavior, Lemaitre’s two-scale damage model was used. Two key parameters, damage strength and damage exponent, are necessary for numerical investigations of HCF behavior. These parameters were determined through experiments with flat specimens and subsequently validated within a numerical model of clinched joints. The numerical results for fatigue match the experimental ones of the clinched joints quite well.</jats:p>","lang":"eng"}],"language":[{"iso":"eng"}],"doi":"10.21741/9781644903551-23","publication_identifier":{"issn":["2474-395X"]},"author":[{"full_name":"Chen, Chin","last_name":"Chen","first_name":"Chin"},{"first_name":"Malte Christian","last_name":"Schlichter","full_name":"Schlichter, Malte Christian","id":"61977"},{"full_name":"Harzheim, Sven","last_name":"Harzheim","first_name":"Sven"},{"full_name":"Hofmann, Martin","first_name":"Martin","last_name":"Hofmann"},{"full_name":"Bobbert, Mathias","last_name":"Bobbert","first_name":"Mathias","id":"7850"},{"full_name":"Meschut, Gerson","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056"},{"last_name":"Wallmersperger","first_name":"Thomas","full_name":"Wallmersperger, Thomas"}],"title":"High-cycle fatigue testing and parameter identification for numerical simulation of aluminum alloy EN AW-6014","year":"2025","intvolume":"        52","date_updated":"2026-02-24T13:43:56Z","publication_status":"published","citation":{"mla":"Chen, Chin, et al. “High-Cycle Fatigue Testing and Parameter Identification for Numerical Simulation of Aluminum Alloy EN AW-6014.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-23\">10.21741/9781644903551-23</a>.","apa":"Chen, C., Schlichter, M. C., Harzheim, S., Hofmann, M., Bobbert, M., Meschut, G., &#38; Wallmersperger, T. (2025). High-cycle fatigue testing and parameter identification for numerical simulation of aluminum alloy EN AW-6014. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-23\">https://doi.org/10.21741/9781644903551-23</a>","ieee":"C. Chen <i>et al.</i>, “High-cycle fatigue testing and parameter identification for numerical simulation of aluminum alloy EN AW-6014,” in <i>Materials Research Proceedings</i>, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-23\">10.21741/9781644903551-23</a>.","chicago":"Chen, Chin, Malte Christian Schlichter, Sven Harzheim, Martin Hofmann, Mathias Bobbert, Gerson Meschut, and Thomas Wallmersperger. “High-Cycle Fatigue Testing and Parameter Identification for Numerical Simulation of Aluminum Alloy EN AW-6014.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-23\">https://doi.org/10.21741/9781644903551-23</a>.","ama":"Chen C, Schlichter MC, Harzheim S, et al. High-cycle fatigue testing and parameter identification for numerical simulation of aluminum alloy EN AW-6014. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-23\">10.21741/9781644903551-23</a>","short":"C. Chen, M.C. Schlichter, S. Harzheim, M. Hofmann, M. Bobbert, G. Meschut, T. Wallmersperger, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","bibtex":"@inproceedings{Chen_Schlichter_Harzheim_Hofmann_Bobbert_Meschut_Wallmersperger_2025, title={High-cycle fatigue testing and parameter identification for numerical simulation of aluminum alloy EN AW-6014}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-23\">10.21741/9781644903551-23</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Chen, Chin and Schlichter, Malte Christian and Harzheim, Sven and Hofmann, Martin and Bobbert, Mathias and Meschut, Gerson and Wallmersperger, Thomas}, year={2025} }"},"project":[{"name":"TRR 285 - A: TRR 285 - Project Area A","_id":"131"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"},{"name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten","_id":"130"}],"quality_controlled":"1","publisher":"Materials Research Forum LLC","_id":"59587","volume":52,"user_id":"7850","status":"public"},{"volume":54,"user_id":"7850","_id":"60440","publisher":"Materials Research Forum LLC","status":"public","project":[{"_id":"130","name":"TRR 285: TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 – A01: TRR 285 - Subproject A01","_id":"135"}],"quality_controlled":"1","citation":{"short":"P.K. Holtkamp, C.R. Bielak, M. Bobbert, G. Meschut, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","chicago":"Holtkamp, Pia Katharina, Christian Roman Bielak, Mathias Bobbert, and Gerson Meschut. “Simulation of the Joining Process of Graded Hardened Multi-Range Capable Rivets.” In <i>Materials Research Proceedings</i>, Vol. 54. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903599-153\">https://doi.org/10.21741/9781644903599-153</a>.","ieee":"P. K. Holtkamp, C. R. Bielak, M. Bobbert, and G. Meschut, “Simulation of the joining process of graded hardened multi-range capable rivets,” in <i>Materials Research Proceedings</i>, 2025, vol. 54, doi: <a href=\"https://doi.org/10.21741/9781644903599-153\">10.21741/9781644903599-153</a>.","apa":"Holtkamp, P. K., Bielak, C. R., Bobbert, M., &#38; Meschut, G. (2025). Simulation of the joining process of graded hardened multi-range capable rivets. <i>Materials Research Proceedings</i>, <i>54</i>. <a href=\"https://doi.org/10.21741/9781644903599-153\">https://doi.org/10.21741/9781644903599-153</a>","bibtex":"@inproceedings{Holtkamp_Bielak_Bobbert_Meschut_2025, title={Simulation of the joining process of graded hardened multi-range capable rivets}, volume={54}, DOI={<a href=\"https://doi.org/10.21741/9781644903599-153\">10.21741/9781644903599-153</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Holtkamp, Pia Katharina and Bielak, Christian Roman and Bobbert, Mathias and Meschut, Gerson}, year={2025} }","ama":"Holtkamp PK, Bielak CR, Bobbert M, Meschut G. Simulation of the joining process of graded hardened multi-range capable rivets. In: <i>Materials Research Proceedings</i>. Vol 54. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903599-153\">10.21741/9781644903599-153</a>","mla":"Holtkamp, Pia Katharina, et al. “Simulation of the Joining Process of Graded Hardened Multi-Range Capable Rivets.” <i>Materials Research Proceedings</i>, vol. 54, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903599-153\">10.21741/9781644903599-153</a>."},"doi":"10.21741/9781644903599-153","language":[{"iso":"eng"}],"intvolume":"        54","publication_status":"published","date_updated":"2026-02-24T14:12:10Z","author":[{"id":"44935","first_name":"Pia Katharina","last_name":"Holtkamp","full_name":"Holtkamp, Pia Katharina"},{"id":"34782","first_name":"Christian Roman","last_name":"Bielak","full_name":"Bielak, Christian Roman"},{"id":"7850","first_name":"Mathias","last_name":"Bobbert","full_name":"Bobbert, Mathias"},{"id":"32056","full_name":"Meschut, Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson"}],"publication_identifier":{"issn":["2474-395X"]},"year":"2025","title":"Simulation of the joining process of graded hardened multi-range capable rivets","department":[{"_id":"43"},{"_id":"157"}],"type":"conference","date_created":"2025-06-27T08:23:00Z","abstract":[{"text":"The versatile self-pierce riveting (V-SPR) is a further development of semi-tubular self-pierce riveting. V-SPR enables adaptation to changing boundary conditions, such as a change in the material thickness combination, without varying the rivet die combination due to increased punch actuation and the use of multi-range capable rivets [1]. The inner punch first sets the rivet. The outer punch then forms the rivet head to the respective sheet thickness. For this, the rivet requires a hard shank and a ductile rivet head, which is achieved by an inductive local hardening process [2]. Until now, the joint formation of rivets with graded hardness profile has been challenging to estimate in the FEM simulation due to the inhomogeneous material conditions in the rivet. In this study, a method capable of reproducing the experimentally determined hardness levels of rivets in detail is shown. This FE model enables the realistic modelling of the mechanical properties of the rivet on the basis of the hardness profile in order to predict the correct deformation processes and stresses during the riveting process. First, the detailed experimental hardness mapping of the locally heat-treated rivets is transferred into the FE model. The FEM material model can predict the local strength of the rivet based on hardness by scaling the flow curves. To estimate the predictive capability of the FEM model, the joint formation of rivets with different graded hardness profiles is compared experimentally and simulative. Based on the validated model, the influence of different rivet hardness profiles on the joint formation is analysed numerically. By adapting the material model, a high level of correlation between the experiment's joint formation and the simulation can be achieved.","lang":"eng"}],"publication":"Materials Research Proceedings"},{"date_updated":"2026-02-26T09:05:06Z","status":"public","year":"2025","title":"Die Möglichkeiten der Filament Extension Atomization ","author":[{"id":"45530","first_name":"Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter","full_name":"Neukötter, Moritz"},{"id":"3959","full_name":"Jesinghausen, Steffen","last_name":"Jesinghausen","first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298"},{"id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","first_name":"Hans-Joachim"}],"conference":{"end_date":"2025-03-21","location":"Hamburg","name":"Jahrestreffen DECHEMA/VDI-Fachgruppe Mehrphasenströmung","start_date":"2025-03-19"},"user_id":"45530","_id":"64658","language":[{"iso":"eng"}],"citation":{"mla":"Neukötter, Moritz, et al. <i>Die Möglichkeiten Der Filament Extension Atomization </i>. 2025.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Die Möglichkeiten der Filament Extension Atomization . In: ; 2025.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2025, title={Die Möglichkeiten der Filament Extension Atomization }, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2025} }","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2025). <i>Die Möglichkeiten der Filament Extension Atomization </i>. Jahrestreffen DECHEMA/VDI-Fachgruppe Mehrphasenströmung, Hamburg.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Die Möglichkeiten der Filament Extension Atomization ,” presented at the Jahrestreffen DECHEMA/VDI-Fachgruppe Mehrphasenströmung, Hamburg, 2025.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2025.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Die Möglichkeiten Der Filament Extension Atomization ,” 2025."},"type":"conference_abstract","department":[{"_id":"9"},{"_id":"150"}],"date_created":"2026-02-26T09:00:10Z"},{"language":[{"iso":"eng"}],"_id":"64659","user_id":"45530","year":"2025","status":"public","title":"Flow around Particles in Uniaxially Elongated Capillary Bridges","conference":{"location":"Berlin","start_date":"2025-06-10","name":"DRG Symposium & Nordic Rheology Conference","end_date":"2025-06-12"},"author":[{"first_name":"Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter","full_name":"Neukötter, Moritz","id":"45530"},{"full_name":"Jesinghausen, Steffen","last_name":"Jesinghausen","orcid":"https://orcid.org/0000-0003-2611-5298","first_name":"Steffen","id":"3959"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim","id":"464"}],"date_updated":"2026-02-26T09:05:00Z","date_created":"2026-02-26T09:03:07Z","type":"conference_abstract","department":[{"_id":"9"},{"_id":"150"}],"citation":{"mla":"Neukötter, Moritz, et al. <i>Flow around Particles in Uniaxially Elongated Capillary Bridges</i>. 2025.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Flow around Particles in Uniaxially Elongated Capillary Bridges. In: ; 2025.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2025, title={Flow around Particles in Uniaxially Elongated Capillary Bridges}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2025} }","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2025). <i>Flow around Particles in Uniaxially Elongated Capillary Bridges</i>. DRG Symposium &#38; Nordic Rheology Conference, Berlin.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Flow around Particles in Uniaxially Elongated Capillary Bridges,” presented at the DRG Symposium &#38; Nordic Rheology Conference, Berlin, 2025.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Flow around Particles in Uniaxially Elongated Capillary Bridges,” 2025.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2025."}},{"department":[{"_id":"9"},{"_id":"150"}],"type":"bachelorsthesis","date_created":"2026-02-26T08:48:05Z","citation":{"bibtex":"@book{Neudorf_Neukötter_2025, title={Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer}, author={Neudorf, Julian  and Neukötter, Moritz}, year={2025} }","ama":"Neudorf J, Neukötter M. <i>Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer</i>.; 2025.","mla":"Neudorf, Julian, and Moritz Neukötter. <i>Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer</i>. 2025.","chicago":"Neudorf, Julian , and Moritz Neukötter. <i>Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer</i>, 2025.","short":"J. Neudorf, M. Neukötter, Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer, 2025.","ieee":"J. Neudorf and M. Neukötter, <i>Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer</i>. 2025.","apa":"Neudorf, J., &#38; Neukötter, M. (2025). <i>Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer</i>."},"supervisor":[{"orcid":"0000-0001-9101-8828","first_name":"Moritz","last_name":"Neukötter","full_name":"Neukötter, Moritz","id":"45530"},{"id":"3959","full_name":"Jesinghausen, Steffen","first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen"},{"id":"464","full_name":"Schmid, Hans-Joachim","orcid":"000-0001-8590-1921","first_name":"Hans-Joachim","last_name":"Schmid"}],"user_id":"45530","language":[{"iso":"ger"}],"_id":"64657","date_updated":"2026-02-26T08:48:33Z","author":[{"full_name":"Neudorf, Julian ","first_name":"Julian ","last_name":"Neudorf"},{"last_name":"Neukötter","orcid":"0000-0001-9101-8828","first_name":"Moritz","full_name":"Neukötter, Moritz","id":"45530"}],"status":"public","title":"Fließverhalten von unterschiedlichen Fluiden im Filament Extension Atomizer","year":"2025"},{"project":[{"_id":"140","name":"TRR 285 – B01: TRR 285 - Subproject B01"},{"_id":"52","name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing"},{"_id":"130","name":"TRR 285:  Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen Prozessketten"}],"citation":{"ieee":"D. R. Devulapally and T. Tröster, “Modelling strategies for non-rotationally symmetric joints,” in <i>Materials Research Proceedings</i>, Paderborn, 2025, vol. 52, doi: <a href=\"https://doi.org/10.21741/9781644903551-21\">10.21741/9781644903551-21</a>.","mla":"Devulapally, Deekshith Reddy, and Thomas Tröster. “Modelling Strategies for Non-Rotationally Symmetric Joints.” <i>Materials Research Proceedings</i>, vol. 52, Materials Research Forum LLC, 2025, doi:<a href=\"https://doi.org/10.21741/9781644903551-21\">10.21741/9781644903551-21</a>.","apa":"Devulapally, D. R., &#38; Tröster, T. (2025). Modelling strategies for non-rotationally symmetric joints. <i>Materials Research Proceedings</i>, <i>52</i>. <a href=\"https://doi.org/10.21741/9781644903551-21\">https://doi.org/10.21741/9781644903551-21</a>","bibtex":"@inproceedings{Devulapally_Tröster_2025, title={Modelling strategies for non-rotationally symmetric joints}, volume={52}, DOI={<a href=\"https://doi.org/10.21741/9781644903551-21\">10.21741/9781644903551-21</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Devulapally, Deekshith Reddy and Tröster, Thomas}, year={2025} }","ama":"Devulapally DR, Tröster T. Modelling strategies for non-rotationally symmetric joints. In: <i>Materials Research Proceedings</i>. Vol 52. Materials Research Forum LLC; 2025. doi:<a href=\"https://doi.org/10.21741/9781644903551-21\">10.21741/9781644903551-21</a>","short":"D.R. Devulapally, T. Tröster, in: Materials Research Proceedings, Materials Research Forum LLC, 2025.","chicago":"Devulapally, Deekshith Reddy, and Thomas Tröster. “Modelling Strategies for Non-Rotationally Symmetric Joints.” In <i>Materials Research Proceedings</i>, Vol. 52. Materials Research Forum LLC, 2025. <a href=\"https://doi.org/10.21741/9781644903551-21\">https://doi.org/10.21741/9781644903551-21</a>."},"volume":52,"user_id":"76837","_id":"59441","publisher":"Materials Research Forum LLC","conference":{"end_date":"2025-04-03","name":"21st International conference on sheet metal ","start_date":"2025-04-01","location":"Paderborn"},"status":"public","department":[{"_id":"149"},{"_id":"9"},{"_id":"321"}],"type":"conference","date_created":"2025-04-08T14:57:51Z","abstract":[{"text":"<jats:p>Abstract. Accurate Finite Element Modeling (FEM) of joints is essential in the design of complex mechanical systems such as automotive body-in-white (BIW) structures, as it plays a critical role in evaluating their performance. Although well-established techniques exist for modeling rotationally symmetric joints, there remains a significant gap in effectively modeling non-rotationally symmetric joints. These joints are particularly relevant in the automotive BIW, where they can better accommodate anisotropic loading conditions. In this study, strategies for modeling non-rotationally symmetric joints were explored using finite element simulations in LS-DYNA. The findings demonstrate that discrete beam elements can capture the anisotropic characteristics of such joints. Two models were tested: a single-beam model for stiffness periodicity every 90°, and a three-beam model for stiffness periodicity every 120°. Force responses, stress distribution, and sheet bending behaviors were analyzed, confirming that discrete beam elements can accurately represent direction-dependent stiffness. These results establish a foundation for developing advanced joint modeling strategies in complex mechanical systems.</jats:p>","lang":"eng"}],"publication":"Materials Research Proceedings","doi":"10.21741/9781644903551-21","language":[{"iso":"eng"}],"intvolume":"        52","date_updated":"2026-02-27T10:50:10Z","publication_status":"published","publication_identifier":{"issn":["2474-395X"]},"author":[{"id":"76837","full_name":"Devulapally, Deekshith Reddy","last_name":"Devulapally","first_name":"Deekshith Reddy"},{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster","id":"553"}],"year":"2025","title":"Modelling strategies for non-rotationally symmetric joints"},{"language":[{"iso":"eng"}],"_id":"64786","user_id":"44605","doi":"https://doi.org/10.71779/776","year":"2025","status":"public","title":"Introduction of electronic lab notebooks in engineering education - opportunities for a cultural change","author":[{"first_name":"Laura","last_name":"Müller","full_name":"Müller, Laura","id":"44605"},{"last_name":"Meihöfener","first_name":"Niclas","full_name":"Meihöfener, Niclas","id":"38611"},{"id":"98462","full_name":"Siemoneit, Johannes Gabriel","orcid":"0000-0002-2543-2331","first_name":"Johannes Gabriel","last_name":"Siemoneit"},{"id":"95903","first_name":"Iryna","last_name":"Mozgova","full_name":"Mozgova, Iryna"}],"date_updated":"2026-02-27T14:27:09Z","date_created":"2026-02-27T14:24:40Z","type":"conference","department":[{"_id":"741"}],"publication":"Engineering Education for Sustainable Development (EESD2025)","citation":{"apa":"Müller, L., Meihöfener, N., Siemoneit, J. G., &#38; Mozgova, I. (2025). Introduction of electronic lab notebooks in engineering education - opportunities for a cultural change. <i>Engineering Education for Sustainable Development (EESD2025)</i>. <a href=\"https://doi.org/10.71779/776\">https://doi.org/10.71779/776</a>","mla":"Müller, Laura, et al. “Introduction of Electronic Lab Notebooks in Engineering Education - Opportunities for a Cultural Change.” <i>Engineering Education for Sustainable Development (EESD2025)</i>, 2025, doi:<a href=\"https://doi.org/10.71779/776\">https://doi.org/10.71779/776</a>.","ieee":"L. Müller, N. Meihöfener, J. G. Siemoneit, and I. Mozgova, “Introduction of electronic lab notebooks in engineering education - opportunities for a cultural change,” 2025, doi: <a href=\"https://doi.org/10.71779/776\">https://doi.org/10.71779/776</a>.","short":"L. Müller, N. Meihöfener, J.G. Siemoneit, I. Mozgova, in: Engineering Education for Sustainable Development (EESD2025), 2025.","ama":"Müller L, Meihöfener N, Siemoneit JG, Mozgova I. Introduction of electronic lab notebooks in engineering education - opportunities for a cultural change. In: <i>Engineering Education for Sustainable Development (EESD2025)</i>. ; 2025. doi:<a href=\"https://doi.org/10.71779/776\">https://doi.org/10.71779/776</a>","chicago":"Müller, Laura, Niclas Meihöfener, Johannes Gabriel Siemoneit, and Iryna Mozgova. “Introduction of Electronic Lab Notebooks in Engineering Education - Opportunities for a Cultural Change.” In <i>Engineering Education for Sustainable Development (EESD2025)</i>, 2025. <a href=\"https://doi.org/10.71779/776\">https://doi.org/10.71779/776</a>.","bibtex":"@inproceedings{Müller_Meihöfener_Siemoneit_Mozgova_2025, title={Introduction of electronic lab notebooks in engineering education - opportunities for a cultural change}, DOI={<a href=\"https://doi.org/10.71779/776\">https://doi.org/10.71779/776</a>}, booktitle={Engineering Education for Sustainable Development (EESD2025)}, author={Müller, Laura and Meihöfener, Niclas and Siemoneit, Johannes Gabriel and Mozgova, Iryna}, year={2025} }"},"quality_controlled":"1"}]