[{"publication":"Journal of Materials Engineering and Performance","type":"journal_article","abstract":[{"lang":"eng","text":"AbstractWithin this research, the multiscale microstructural evolution before and after the tensile test of a FeCo alloy is addressed. X-ray µ-computer tomography (CT), electron backscattered diffraction (EBSD), and transmission electron microscopy (TEM) are employed to determine the microstructure on different length scales. Microstructural evolution is studied by performing EBSD of the same area before and after the tensile test. As a result, $$\\langle$$\r\n ⟨\r\n 001$$\\rangle$$\r\n ⟩\r\n ||TD, $$\\langle$$\r\n ⟨\r\n 011$$\\rangle$$\r\n ⟩\r\n ||TD are hard orientations and $$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n ||TD is soft orientations for deformation accommodation. It is not possible to predict the deformation of a single grain with the Taylor model. However, the Taylor model accurately predicts the orientation of all grains after deformation. {123}$$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n is the most active slip system, and {112}$$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n is the least active slip system. Both EBSD micrographs show grain subdivision after tensile testing. TEM images show the formation of dislocation cells. Correlative HRTEM images show unresolved lattice fringes at dislocation cell boundaries, whereas resolved lattice fringes are observed at dislocation cell interior. Since Schmid’s law is unable to predict the deformation behavior of grains, the boundary slip transmission accurately predicts the grain deformation behavior."}],"status":"public","_id":"41517","department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"language":[{"iso":"eng"}],"quality_controlled":"1","publication_identifier":{"issn":["1059-9495","1544-1024"]},"publication_status":"published","issue":"11","year":"2021","page":"8048-8056","intvolume":" 30","citation":{"mla":"Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, vol. 30, no. 11, Springer Science and Business Media LLC, 2021, pp. 8048–56, doi:10.1007/s11665-021-06065-9.","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance 30 (2021) 8048–8056.","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy}, volume={30}, DOI={10.1007/s11665-021-06065-9}, number={11}, journal={Journal of Materials Engineering and Performance}, publisher={Springer Science and Business Media LLC}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}, pages={8048–8056} }","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance, 30(11), 8048–8056. https://doi.org/10.1007/s11665-021-06065-9","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance 30, no. 11 (2021): 8048–56. https://doi.org/10.1007/s11665-021-06065-9.","ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, vol. 30, no. 11, pp. 8048–8056, 2021, doi: 10.1007/s11665-021-06065-9.","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. 2021;30(11):8048-8056. doi:10.1007/s11665-021-06065-9"},"publisher":"Springer Science and Business Media LLC","date_updated":"2023-06-01T14:36:06Z","volume":30,"author":[{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"first_name":"Lennart","full_name":"Tasche, Lennart","id":"71508","last_name":"Tasche"},{"last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411","first_name":"Kay-Peter"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"date_created":"2023-02-02T14:39:53Z","title":"Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy","doi":"10.1007/s11665-021-06065-9"},{"abstract":[{"text":"The addition of Ag to amorphous carbon (a-C) films is highly effective in tailoring the tribo-mechanical properties and biocompatibility. For biomedical applications, Ag-containing a-C (a-C:Ag) represents a promising film material for improving the biofunctional surface properties of Ti-based alloys. In a sputtering process, a-C:Ag films, with Ag contents up to 7.5 at.%, were deposited with a chemically graded TixCy interlayer onto Ti6Al4V. The tribo-mechanical and biocompatible properties of a-C:Ag were evaluated. The influence of the Ag content on these properties was analyzed and compared to those of uncoated Ti6Al4V.\r\n\r\nRaman spectroscopy reveals that the amount of incorporated Ag does not induce significant structural changes in the disordered network, only a reduced number of vacancies and sp3-coordinated C bonds within the sp2-dominant a-C network is assigned to the films with high Ag concentration. With increasing Ag content, stresses, hardness, and elastic modulus decrease from (2.02 ± 0.07) to (1.15 ± 0.03) GPa, from (17.4 ± 1.5) to (13.4 ± 0.9) GPa, and from (171.8 ± 8.1) to (138.5 ± 5.8) GPa, respectively. In tribometer tests, the friction behavior against Al2O3 in lubricated condition with a simulated-body-fluid-based lubricant is not affected by the Ag concentration, but the Al2O3 counterpart wear is reduced for all a-C:Ag films compared to a-C. The friction against ultra-high-molecular-weight polyethylene (UHMWPE) decreases continuously with increasing Ag concentration and the counterpart wear is lower at higher Ag contents. Compared to a-C:Ag, Ti6Al4V demonstrates lower friction against UHMWPE and higher friction against Al2O3. The a-C:Ag films are not exposed to abrasion by Al2O3 or pronounced material transfer of UHMWPE. The hardness difference and chemical affinity between the friction partners are decisive for the tribological behavior of a-C:Ag. Compared to Ti6Al4V, the a-C:Ag films show antibacterial activity against Staphylococcus aureus, while the proliferation of osteoblast-like cells is reduced by Ag.","lang":"eng"}],"status":"public","publication":"Surface and Coatings Technology","type":"journal_article","article_number":"127384","language":[{"iso":"eng"}],"_id":"24243","department":[{"_id":"158"}],"user_id":"43720","year":"2021","citation":{"ama":"Tillmann W, Lopes Dias NF, Franke C, et al. Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology. Published online 2021. doi:10.1016/j.surfcoat.2021.127384","ieee":"W. Tillmann et al., “Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V,” Surface and Coatings Technology, Art. no. 127384, 2021, doi: 10.1016/j.surfcoat.2021.127384.","chicago":"Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Carlo Franke, David Kokalj, Dominic Stangier, Viviane Filor, Rafael Hernán Mateus-Vargas, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 2021. https://doi.org/10.1016/j.surfcoat.2021.127384.","apa":"Tillmann, W., Lopes Dias, N. F., Franke, C., Kokalj, D., Stangier, D., Filor, V., Mateus-Vargas, R. H., Oltmanns, H., Kietzmann, M., Meißner, J., Hein, M., Pramanik, S., Hoyer, K.-P., Schaper, M., Nienhaus, A., Thomann, C. A., & Debus, J. (2021). Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V. Surface and Coatings Technology, Article 127384. https://doi.org/10.1016/j.surfcoat.2021.127384","short":"W. Tillmann, N.F. Lopes Dias, C. Franke, D. Kokalj, D. Stangier, V. Filor, R.H. Mateus-Vargas, H. Oltmanns, M. Kietzmann, J. Meißner, M. Hein, S. Pramanik, K.-P. Hoyer, M. Schaper, A. Nienhaus, C.A. Thomann, J. Debus, Surface and Coatings Technology (2021).","mla":"Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Biocompatibility of Ag-Containing Amorphous Carbon Films Deposited onto Ti6Al4V.” Surface and Coatings Technology, 127384, 2021, doi:10.1016/j.surfcoat.2021.127384.","bibtex":"@article{Tillmann_Lopes Dias_Franke_Kokalj_Stangier_Filor_Mateus-Vargas_Oltmanns_Kietzmann_Meißner_et al._2021, title={Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V}, DOI={10.1016/j.surfcoat.2021.127384}, number={127384}, journal={Surface and Coatings Technology}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Franke, Carlo and Kokalj, David and Stangier, Dominic and Filor, Viviane and Mateus-Vargas, Rafael Hernán and Oltmanns, Hilke and Kietzmann, Manfred and Meißner, Jessica and et al.}, year={2021} }"},"quality_controlled":"1","publication_identifier":{"issn":["0257-8972"]},"publication_status":"published","title":"Tribo-mechanical properties and biocompatibility of Ag-containing amorphous carbon films deposited onto Ti6Al4V","doi":"10.1016/j.surfcoat.2021.127384","date_updated":"2023-06-01T14:38:10Z","author":[{"first_name":"Wolfgang","last_name":"Tillmann","full_name":"Tillmann, Wolfgang"},{"last_name":"Lopes Dias","full_name":"Lopes Dias, Nelson Filipe","first_name":"Nelson Filipe"},{"last_name":"Franke","full_name":"Franke, Carlo","first_name":"Carlo"},{"first_name":"David","full_name":"Kokalj, David","last_name":"Kokalj"},{"last_name":"Stangier","full_name":"Stangier, Dominic","first_name":"Dominic"},{"first_name":"Viviane","last_name":"Filor","full_name":"Filor, Viviane"},{"first_name":"Rafael Hernán","full_name":"Mateus-Vargas, Rafael Hernán","last_name":"Mateus-Vargas"},{"full_name":"Oltmanns, Hilke","last_name":"Oltmanns","first_name":"Hilke"},{"full_name":"Kietzmann, Manfred","last_name":"Kietzmann","first_name":"Manfred"},{"full_name":"Meißner, Jessica","last_name":"Meißner","first_name":"Jessica"},{"first_name":"Maxwell","id":"52771","full_name":"Hein, Maxwell","last_name":"Hein","orcid":"0000-0002-3732-2236"},{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"full_name":"Nienhaus, Alexander","last_name":"Nienhaus","first_name":"Alexander"},{"first_name":"Carl Arne","last_name":"Thomann","full_name":"Thomann, Carl Arne"},{"full_name":"Debus, Jörg","last_name":"Debus","first_name":"Jörg"}],"date_created":"2021-09-13T08:53:05Z"},{"author":[{"full_name":"Křivská, Barbora","last_name":"Křivská","first_name":"Barbora"},{"first_name":"Michaela","last_name":"Šlapáková","full_name":"Šlapáková, Michaela"},{"full_name":"Veselý, Jozef","last_name":"Veselý","first_name":"Jozef"},{"full_name":"Kihoulou, Martin","last_name":"Kihoulou","first_name":"Martin"},{"last_name":"Fekete","full_name":"Fekete, Klaudia","first_name":"Klaudia"},{"first_name":"Peter","last_name":"Minárik","full_name":"Minárik, Peter"},{"full_name":"Králík, Rostislav","last_name":"Králík","first_name":"Rostislav"},{"last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822","first_name":"Olexandr"},{"first_name":"Mykhailo","last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"date_created":"2022-02-11T17:40:03Z","volume":14,"oa":"1","publisher":"MDPI AG","date_updated":"2023-06-01T14:38:18Z","main_file_link":[{"open_access":"1","url":"https://www.mdpi.com/1996-1944/14/24/7771/htm"}],"doi":"10.3390/ma14247771","title":"Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet","issue":"24","publication_status":"published","publication_identifier":{"issn":["1996-1944"]},"quality_controlled":"1","citation":{"apa":"Křivská, B., Šlapáková, M., Veselý, J., Kihoulou, M., Fekete, K., Minárik, P., Králík, R., Grydin, O., Stolbchenko, M., & Schaper, M. (2021). Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet. Materials, 14(24), Article 7771. https://doi.org/10.3390/ma14247771","bibtex":"@article{Křivská_Šlapáková_Veselý_Kihoulou_Fekete_Minárik_Králík_Grydin_Stolbchenko_Schaper_2021, title={Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet}, volume={14}, DOI={10.3390/ma14247771}, number={247771}, journal={Materials}, publisher={MDPI AG}, author={Křivská, Barbora and Šlapáková, Michaela and Veselý, Jozef and Kihoulou, Martin and Fekete, Klaudia and Minárik, Peter and Králík, Rostislav and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}, year={2021} }","mla":"Křivská, Barbora, et al. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials, vol. 14, no. 24, 7771, MDPI AG, 2021, doi:10.3390/ma14247771.","short":"B. Křivská, M. Šlapáková, J. Veselý, M. Kihoulou, K. Fekete, P. Minárik, R. Králík, O. Grydin, M. Stolbchenko, M. Schaper, Materials 14 (2021).","chicago":"Křivská, Barbora, Michaela Šlapáková, Jozef Veselý, Martin Kihoulou, Klaudia Fekete, Peter Minárik, Rostislav Králík, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet.” Materials 14, no. 24 (2021). https://doi.org/10.3390/ma14247771.","ieee":"B. Křivská et al., “Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet,” Materials, vol. 14, no. 24, Art. no. 7771, 2021, doi: 10.3390/ma14247771.","ama":"Křivská B, Šlapáková M, Veselý J, et al. Intermetallic Phases Identification and Diffusion Simulation in Twin-Roll Cast Al-Fe Clad Sheet. Materials. 2021;14(24). doi:10.3390/ma14247771"},"intvolume":" 14","year":"2021","user_id":"43720","department":[{"_id":"158"}],"_id":"29815","language":[{"iso":"eng"}],"article_number":"7771","keyword":["General Materials Science"],"type":"journal_article","publication":"Materials","status":"public","abstract":[{"lang":"eng","text":"Aluminium steel clad materials have high potential for industrial applications. Their mechanical properties are governed by an intermetallic layer, which forms upon heat treatment at the Al-Fe interface. Transmission electron microscopy was employed to identify the phases present at the interface by selective area electron diffraction and energy dispersive spectroscopy. Three phases were identified: orthorhombic Al5Fe2, monoclinic Al13Fe4 and cubic Al19Fe4MnSi2. An effective interdiffusion coefficient dependent on concentration was determined according to the Boltzmann–Matano method. The highest value of the interdiffusion coefficient was reached at the composition of the intermetallic phases. Afterwards, the process of diffusion considering the evaluated interdiffusion coefficient was simulated using the finite element method. Results of the simulations revealed that growth of the intermetallic phases proceeds preferentially in the direction of aluminium."}]},{"publication":"Materialwissenschaft und Werkstofftechnik","abstract":[{"text":"Laser beam melting (LBM) is an advanced manufacturing technology providing\r\nspecial features and the possibility to produce complex and individual parts directly\r\nfrom a CAD model. TiAl6V4 is the most common used titanium alloy particularly\r\nin biomedical applications. TiAl6Nb7 shows promising improvements especially\r\nregarding biocompatible properties due to the substitution of the hazardous\r\nvanadium. This work focuses on the examination of laser beam melted TiAl6Nb7.\r\nFor microstructural investigation scanning electron microscopy including energydispersive\r\nx-ray spectroscopy as well as electron backscatter diffraction are utilized.\r\nThe laser beam melted related acicular microstructure as well as the corresponding\r\nmechanical properties, which are determined by hardness measurements\r\nand tensile tests, are investigated. The laser beam melted alloy meets,\r\nexcept of breaking elongation A, the mechanical demands like ultimate tensile\r\nstrength Rm, yield strength Rp0.2, Vickers hardness HV of international standard\r\nISO 5832-11. Next steps contain comparison between TiAl6Nb7 and TiAl6V4 in\r\ndifferent conditions. Further investigations aim at improving mechanical properties\r\nof TiAl6Nb7 by heat treatments and assessment of their influence on the microstructure\r\nas well as examination regarding the corrosive behavior in human bodylike\r\nconditions.","lang":"eng"}],"language":[{"iso":"eng"}],"keyword":["Laser beam melting","titanium alloy","TiAl6Nb7","biomedical engineering","implants"],"quality_controlled":"1","year":"2021","date_created":"2021-09-09T15:40:08Z","title":"Additively processed TiAl6Nb7 alloy for biomedical applications","type":"journal_article","status":"public","user_id":"43720","department":[{"_id":"158"}],"_id":"24086","article_type":"original","publication_status":"published","publication_identifier":{"issn":["0933-5137","1521-4052"]},"citation":{"ama":"Hein M, Hoyer K-P, Schaper M. Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft und Werkstofftechnik. 2021;52:703-716. doi:10.1002/mawe.202000288","apa":"Hein, M., Hoyer, K.-P., & Schaper, M. (2021). Additively processed TiAl6Nb7 alloy for biomedical applications. Materialwissenschaft Und Werkstofftechnik, 52, 703–716. https://doi.org/10.1002/mawe.202000288","mla":"Hein, Maxwell, et al. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik, vol. 52, 2021, pp. 703–16, doi:10.1002/mawe.202000288.","bibtex":"@article{Hein_Hoyer_Schaper_2021, title={Additively processed TiAl6Nb7 alloy for biomedical applications}, volume={52}, DOI={10.1002/mawe.202000288}, journal={Materialwissenschaft und Werkstofftechnik}, author={Hein, Maxwell and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021}, pages={703–716} }","short":"M. Hein, K.-P. Hoyer, M. Schaper, Materialwissenschaft Und Werkstofftechnik 52 (2021) 703–716.","chicago":"Hein, Maxwell, Kay-Peter Hoyer, and Mirko Schaper. “Additively Processed TiAl6Nb7 Alloy for Biomedical Applications.” Materialwissenschaft Und Werkstofftechnik 52 (2021): 703–16. https://doi.org/10.1002/mawe.202000288.","ieee":"M. Hein, K.-P. Hoyer, and M. Schaper, “Additively processed TiAl6Nb7 alloy for biomedical applications,” Materialwissenschaft und Werkstofftechnik, vol. 52, pp. 703–716, 2021, doi: 10.1002/mawe.202000288."},"intvolume":" 52","page":"703-716","author":[{"full_name":"Hein, Maxwell","id":"52771","orcid":"0000-0002-3732-2236","last_name":"Hein","first_name":"Maxwell"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"volume":52,"date_updated":"2023-06-01T14:38:03Z","doi":"10.1002/mawe.202000288"},{"type":"journal_article","status":"public","user_id":"43720","department":[{"_id":"158"}],"_id":"29813","publication_status":"published","publication_identifier":{"issn":["1431-9276","1435-8115"]},"citation":{"short":"M. Cieslar, R. Králík, L. Bajtošová, B. Křivská, M. Hájek, S. Belejová, O. Grydin, M. Stolbchenko, M. Schaper, Microscopy and Microanalysis 27 (2021) 79–80.","mla":"Cieslar, Miroslav, et al. “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-Situ SEM and STEM.” Microscopy and Microanalysis, vol. 27, no. S2, Cambridge University Press (CUP), 2021, pp. 79–80, doi:10.1017/s1431927621013398.","bibtex":"@article{Cieslar_Králík_Bajtošová_Křivská_Hájek_Belejová_Grydin_Stolbchenko_Schaper_2021, title={High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM}, volume={27}, DOI={10.1017/s1431927621013398}, number={S2}, journal={Microscopy and Microanalysis}, publisher={Cambridge University Press (CUP)}, author={Cieslar, Miroslav and Králík, Rostislav and Bajtošová, Lucia and Křivská, Barbora and Hájek, Michal and Belejová, Sára and Grydin, Olexandr and Stolbchenko, Mykhailo and Schaper, Mirko}, year={2021}, pages={79–80} }","apa":"Cieslar, M., Králík, R., Bajtošová, L., Křivská, B., Hájek, M., Belejová, S., Grydin, O., Stolbchenko, M., & Schaper, M. (2021). High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM. Microscopy and Microanalysis, 27(S2), 79–80. https://doi.org/10.1017/s1431927621013398","ama":"Cieslar M, Králík R, Bajtošová L, et al. High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM. Microscopy and Microanalysis. 2021;27(S2):79-80. doi:10.1017/s1431927621013398","ieee":"M. Cieslar et al., “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 79–80, 2021, doi: 10.1017/s1431927621013398.","chicago":"Cieslar, Miroslav, Rostislav Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, Sára Belejová, Olexandr Grydin, Mykhailo Stolbchenko, and Mirko Schaper. “High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-Situ SEM and STEM.” Microscopy and Microanalysis 27, no. S2 (2021): 79–80. https://doi.org/10.1017/s1431927621013398."},"page":"79-80","intvolume":" 27","author":[{"first_name":"Miroslav","last_name":"Cieslar","full_name":"Cieslar, Miroslav"},{"first_name":"Rostislav","full_name":"Králík, Rostislav","last_name":"Králík"},{"full_name":"Bajtošová, Lucia","last_name":"Bajtošová","first_name":"Lucia"},{"last_name":"Křivská","full_name":"Křivská, Barbora","first_name":"Barbora"},{"full_name":"Hájek, Michal","last_name":"Hájek","first_name":"Michal"},{"full_name":"Belejová, Sára","last_name":"Belejová","first_name":"Sára"},{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"first_name":"Mykhailo","last_name":"Stolbchenko","full_name":"Stolbchenko, Mykhailo"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"volume":27,"date_updated":"2023-06-01T14:38:37Z","doi":"10.1017/s1431927621013398","publication":"Microscopy and Microanalysis","language":[{"iso":"eng"}],"keyword":["Instrumentation"],"issue":"S2","quality_controlled":"1","year":"2021","date_created":"2022-02-11T17:33:29Z","publisher":"Cambridge University Press (CUP)","title":"High Temperature Annealing of Twin-Roll Cast Al-Li-Based Alloy Studied by In-situ SEM and STEM"},{"author":[{"id":"44307","full_name":"Krüger, Jan Tobias","orcid":"0000-0002-0827-9654","last_name":"Krüger","first_name":"Jan Tobias"},{"last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter","first_name":"Kay-Peter"},{"full_name":"Filor, Viviane","last_name":"Filor","first_name":"Viviane"},{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"first_name":"Manfred","last_name":"Kietzmann","full_name":"Kietzmann, Manfred"},{"first_name":"Jessica","full_name":"Meißner, Jessica","last_name":"Meißner"},{"first_name":"Mirko","last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720"}],"volume":871,"date_updated":"2023-06-01T14:35:36Z","doi":"10.1016/j.jallcom.2021.159544","publication_status":"published","publication_identifier":{"issn":["0925-8388"]},"citation":{"apa":"Krüger, J. T., Hoyer, K.-P., Filor, V., Pramanik, S., Kietzmann, M., Meißner, J., & Schaper, M. (2021). Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds, 871, Article 159544. https://doi.org/10.1016/j.jallcom.2021.159544","ama":"Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. 2021;871. doi:10.1016/j.jallcom.2021.159544","mla":"Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, vol. 871, 159544, Elsevier BV, 2021, doi:10.1016/j.jallcom.2021.159544.","bibtex":"@article{Krüger_Hoyer_Filor_Pramanik_Kietzmann_Meißner_Schaper_2021, title={Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation}, volume={871}, DOI={10.1016/j.jallcom.2021.159544}, number={159544}, journal={Journal of Alloys and Compounds}, publisher={Elsevier BV}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Filor, Viviane and Pramanik, Sudipta and Kietzmann, Manfred and Meißner, Jessica and Schaper, Mirko}, year={2021} }","short":"J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds 871 (2021).","ieee":"J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, vol. 871, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544.","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds 871 (2021). https://doi.org/10.1016/j.jallcom.2021.159544."},"intvolume":" 871","user_id":"43720","department":[{"_id":"9"},{"_id":"158"}],"_id":"41514","article_number":"159544","type":"journal_article","status":"public","date_created":"2023-02-02T14:34:42Z","publisher":"Elsevier BV","title":"Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation","quality_controlled":"1","year":"2021","language":[{"iso":"eng"}],"keyword":["Materials Chemistry","Metals and Alloys","Mechanical Engineering","Mechanics of Materials"],"publication":"Journal of Alloys and Compounds"},{"doi":"10.1017/s1431927621013453","volume":27,"author":[{"last_name":"Křivská","full_name":"Křivská, Barbora","first_name":"Barbora"},{"last_name":"Šlapáková","full_name":"Šlapáková, Michaela","first_name":"Michaela"},{"last_name":"Minárik","full_name":"Minárik, Peter","first_name":"Peter"},{"first_name":"Klaudia","last_name":"Fekete","full_name":"Fekete, Klaudia"},{"full_name":"Králík, Rostislav","last_name":"Králík","first_name":"Rostislav"},{"first_name":"Mykhailo","full_name":"Stolbchenko, Mykhailo","last_name":"Stolbchenko"},{"full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper","first_name":"Mirko"},{"first_name":"Olexandr","id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin"}],"date_updated":"2023-06-01T14:38:28Z","intvolume":" 27","page":"91-92","citation":{"short":"B. Křivská, M. Šlapáková, P. Minárik, K. Fekete, R. Králík, M. Stolbchenko, M. Schaper, O. Grydin, Microscopy and Microanalysis 27 (2021) 91–92.","bibtex":"@article{Křivská_Šlapáková_Minárik_Fekete_Králík_Stolbchenko_Schaper_Grydin_2021, title={Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM}, volume={27}, DOI={10.1017/s1431927621013453}, number={S2}, journal={Microscopy and Microanalysis}, publisher={Cambridge University Press (CUP)}, author={Křivská, Barbora and Šlapáková, Michaela and Minárik, Peter and Fekete, Klaudia and Králík, Rostislav and Stolbchenko, Mykhailo and Schaper, Mirko and Grydin, Olexandr}, year={2021}, pages={91–92} }","mla":"Křivská, Barbora, et al. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” Microscopy and Microanalysis, vol. 27, no. S2, Cambridge University Press (CUP), 2021, pp. 91–92, doi:10.1017/s1431927621013453.","apa":"Křivská, B., Šlapáková, M., Minárik, P., Fekete, K., Králík, R., Stolbchenko, M., Schaper, M., & Grydin, O. (2021). Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM. Microscopy and Microanalysis, 27(S2), 91–92. https://doi.org/10.1017/s1431927621013453","ama":"Křivská B, Šlapáková M, Minárik P, et al. Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM. Microscopy and Microanalysis. 2021;27(S2):91-92. doi:10.1017/s1431927621013453","chicago":"Křivská, Barbora, Michaela Šlapáková, Peter Minárik, Klaudia Fekete, Rostislav Králík, Mykhailo Stolbchenko, Mirko Schaper, and Olexandr Grydin. “Intermetallic Phase Growth in Al-Steel Clad Strip during In-Situ Heating in TEM.” Microscopy and Microanalysis 27, no. S2 (2021): 91–92. https://doi.org/10.1017/s1431927621013453.","ieee":"B. Křivská et al., “Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM,” Microscopy and Microanalysis, vol. 27, no. S2, pp. 91–92, 2021, doi: 10.1017/s1431927621013453."},"publication_identifier":{"issn":["1431-9276","1435-8115"]},"publication_status":"published","department":[{"_id":"158"}],"user_id":"43720","_id":"29814","status":"public","type":"journal_article","title":"Intermetallic Phase Growth in Al-steel Clad Strip during In-situ Heating in TEM","date_created":"2022-02-11T17:39:16Z","publisher":"Cambridge University Press (CUP)","year":"2021","issue":"S2","quality_controlled":"1","language":[{"iso":"eng"}],"keyword":["Instrumentation"],"publication":"Microscopy and Microanalysis"},{"title":"Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study","doi":"10.1016/j.addma.2021.102087","publisher":"Elsevier BV","date_updated":"2023-06-01T14:35:58Z","volume":46,"date_created":"2023-02-02T14:35:02Z","author":[{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"first_name":"Lennart","last_name":"Tasche","full_name":"Tasche, Lennart","id":"71508"},{"first_name":"Kay-Peter","last_name":"Hoyer","id":"48411","full_name":"Hoyer, Kay-Peter"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"year":"2021","intvolume":" 46","citation":{"bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study}, volume={46}, DOI={10.1016/j.addma.2021.102087}, number={102087}, journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing 46 (2021).","mla":"Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, vol. 46, 102087, Elsevier BV, 2021, doi:10.1016/j.addma.2021.102087.","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing, 46, Article 102087. https://doi.org/10.1016/j.addma.2021.102087","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. 2021;46. doi:10.1016/j.addma.2021.102087","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing 46 (2021). https://doi.org/10.1016/j.addma.2021.102087.","ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, vol. 46, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087."},"publication_identifier":{"issn":["2214-8604"]},"quality_controlled":"1","publication_status":"published","keyword":["Industrial and Manufacturing Engineering","Engineering (miscellaneous)","General Materials Science","Biomedical Engineering"],"article_number":"102087","language":[{"iso":"eng"}],"_id":"41515","department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","status":"public","publication":"Additive Manufacturing","type":"journal_article"},{"abstract":[{"lang":"eng","text":"AbstractWithin this research, the multiscale microstructural evolution before and after the tensile test of a FeCo alloy is addressed. X-ray µ-computer tomography (CT), electron backscattered diffraction (EBSD), and transmission electron microscopy (TEM) are employed to determine the microstructure on different length scales. Microstructural evolution is studied by performing EBSD of the same area before and after the tensile test. As a result, $$\\langle$$\r\n ⟨\r\n 001$$\\rangle$$\r\n ⟩\r\n ||TD, $$\\langle$$\r\n ⟨\r\n 011$$\\rangle$$\r\n ⟩\r\n ||TD are hard orientations and $$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n ||TD is soft orientations for deformation accommodation. It is not possible to predict the deformation of a single grain with the Taylor model. However, the Taylor model accurately predicts the orientation of all grains after deformation. {123}$$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n is the most active slip system, and {112}$$\\langle$$\r\n ⟨\r\n 111$$\\rangle$$\r\n ⟩\r\n is the least active slip system. Both EBSD micrographs show grain subdivision after tensile testing. TEM images show the formation of dislocation cells. Correlative HRTEM images show unresolved lattice fringes at dislocation cell boundaries, whereas resolved lattice fringes are observed at dislocation cell interior. Since Schmid’s law is unable to predict the deformation behavior of grains, the boundary slip transmission accurately predicts the grain deformation behavior."}],"status":"public","publication":"Journal of Materials Engineering and Performance","type":"journal_article","language":[{"iso":"eng"}],"_id":"24090","department":[{"_id":"158"}],"user_id":"43720","year":"2021","citation":{"ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. Published online 2021. doi:10.1007/s11665-021-06065-9","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021. https://doi.org/10.1007/s11665-021-06065-9.","ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy,” Journal of Materials Engineering and Performance, 2021, doi: 10.1007/s11665-021-06065-9.","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy. Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-021-06065-9","mla":"Pramanik, Sudipta, et al. “Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy.” Journal of Materials Engineering and Performance, 2021, doi:10.1007/s11665-021-06065-9.","short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Journal of Materials Engineering and Performance (2021).","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy}, DOI={10.1007/s11665-021-06065-9}, journal={Journal of Materials Engineering and Performance}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }"},"quality_controlled":"1","publication_identifier":{"issn":["1059-9495","1544-1024"]},"publication_status":"published","title":"Correlation between Taylor Model Prediction and Transmission Electron Microscopy-Based Microstructural Investigations of Quasi-In Situ Tensile Deformation of Additively Manufactured FeCo Alloy","doi":"10.1007/s11665-021-06065-9","date_updated":"2023-06-01T14:39:50Z","date_created":"2021-09-09T15:50:21Z","author":[{"full_name":"Pramanik, Sudipta","last_name":"Pramanik","first_name":"Sudipta"},{"last_name":"Tasche","full_name":"Tasche, Lennart","first_name":"Lennart"},{"full_name":"Hoyer, Kay-Peter","id":"48411","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}]},{"department":[{"_id":"9"},{"_id":"158"}],"user_id":"43720","_id":"27509","language":[{"iso":"eng"}],"publication":"Rapid Prototyping Journal","type":"journal_article","status":"public","abstract":[{"text":"\r\nPurpose\r\nThe currently existing restrictions regarding the deployment of additively manufactured components because of poor surface roughness, porosity and residual stresses as well as their influence on the low-cycle fatigue (LCF) strength are addressed in this paper.\r\n\r\n\r\nDesign/methodology/approach\r\nThis study aims to evaluating the effect of different pre- and post-treatments on the LCF strength of additively manufactured 316L parts. Therefore, 316L specimens manufactured by laser powder bed fusion were examined in their as-built state as well as after grinding, or coating with regard to the surface roughness, residual stresses and LCF strength. To differentiate between topographical effects and residual stress-related phenomena, stress-relieved 316L specimens served as a reference throughout the investigations. To enable an alumina coating of the 316L components, atmospheric plasma spraying was used, and the near-surface residual stresses and the surface roughness are measured and investigated.\r\n\r\n\r\nFindings\r\nThe results have shown that the applied pre- and post-treatments such as stress-relief heat treatment, grinding and alumina coating have each led to an increase in LCF strength of the 316L specimens. In contrast, the non-heat-treated specimens predominantly exhibited coating delamination.\r\n\r\n\r\nOriginality/value\r\nTo the best of the authors’ knowledge, this is the first study of the correlation between the LCF behavior of additively manufactured uncoated 316L specimens in comparison with additively manufactured 316L specimens with an alumina coating.\r\n","lang":"eng"}],"author":[{"id":"11199","full_name":"Garthe, Kai-Uwe","last_name":"Garthe","orcid":"0000-0003-0741-3812","first_name":"Kai-Uwe"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"first_name":"Leif","full_name":"Hagen, Leif","last_name":"Hagen"},{"first_name":"Wolfgang","full_name":"Tillmann, Wolfgang","last_name":"Tillmann"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2021-11-17T10:00:23Z","date_updated":"2023-06-01T14:39:00Z","doi":"10.1108/rpj-01-2021-0017","title":"Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior","publication_identifier":{"issn":["1355-2546","1355-2546"]},"quality_controlled":"1","publication_status":"published","citation":{"apa":"Garthe, K.-U., Hoyer, K.-P., Hagen, L., Tillmann, W., & Schaper, M. (2021). Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. https://doi.org/10.1108/rpj-01-2021-0017","short":"K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, M. Schaper, Rapid Prototyping Journal (2021).","bibtex":"@article{Garthe_Hoyer_Hagen_Tillmann_Schaper_2021, title={Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior}, DOI={10.1108/rpj-01-2021-0017}, journal={Rapid Prototyping Journal}, author={Garthe, Kai-Uwe and Hoyer, Kay-Peter and Hagen, Leif and Tillmann, Wolfgang and Schaper, Mirko}, year={2021} }","mla":"Garthe, Kai-Uwe, et al. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021, doi:10.1108/rpj-01-2021-0017.","ama":"Garthe K-U, Hoyer K-P, Hagen L, Tillmann W, Schaper M. Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior. Rapid Prototyping Journal. Published online 2021. doi:10.1108/rpj-01-2021-0017","ieee":"K.-U. Garthe, K.-P. Hoyer, L. Hagen, W. Tillmann, and M. Schaper, “Correlation between pre- and post-treatments of additively manufactured 316L parts and the resulting low cycle fatigue behavior,” Rapid Prototyping Journal, 2021, doi: 10.1108/rpj-01-2021-0017.","chicago":"Garthe, Kai-Uwe, Kay-Peter Hoyer, Leif Hagen, Wolfgang Tillmann, and Mirko Schaper. “Correlation between Pre- and Post-Treatments of Additively Manufactured 316L Parts and the Resulting Low Cycle Fatigue Behavior.” Rapid Prototyping Journal, 2021. https://doi.org/10.1108/rpj-01-2021-0017."},"year":"2021"},{"type":"journal_article","publication":"Journal of Alloys and Compounds","status":"public","abstract":[{"lang":"eng","text":"Resorbable implants are highly beneficial to reduce patient burden since they need not be removed after a defined period. Currently, magnesium (Mg) and polymers are being applied as bioresorbable materials. However, for some applications the insufficient mechanical properties and high degradation rate of Mg cause the need for new materials. Iron (Fe)-based alloys are promising due to their biocompatibility and good mechanical properties, but their degradation rate is too low and needs to be adapted eg. via alloying with manganese (Mn). Besides, phases with high electrochemical potential lead to increased degradation of residual material with lower potential based on the galvanic coupling. Here, silver (Ag) is promising for the formation of such phases due to its high electrochemical potential (+0.8 V vs. SHE), immiscibility with Fe, biocompatibility, and anti-bacterial properties. Since remaining silver particles can lead to adverse consequences as thrombosis, these particles need to dissolve after the matrix material. Thus a silver alloy with high electrochemical potential, biocompatibility, and adjusted degradation behavior is required as an additive for iron-based bioresorbable materials. Several silver alloying systems are possible, but regarding the electrochemical potential and degradation behavior of binary alloys, calcium (Ca) and lanthanum (La) are best-suited considering their biocompatibility. Accordingly, this research addresses AgCa and AgCaLa alloys as additives for iron-based degradable materials with adapted degradation behavior."}],"user_id":"43720","department":[{"_id":"158"}],"_id":"24087","language":[{"iso":"eng"}],"article_number":"159544","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0925-8388"]},"citation":{"mla":"Krüger, Jan Tobias, et al. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 159544, 2021, doi:10.1016/j.jallcom.2021.159544.","bibtex":"@article{Krüger_Hoyer_Filor_Pramanik_Kietzmann_Meißner_Schaper_2021, title={Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation}, DOI={10.1016/j.jallcom.2021.159544}, number={159544}, journal={Journal of Alloys and Compounds}, author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Filor, Viviane and Pramanik, Sudipta and Kietzmann, Manfred and Meißner, Jessica and Schaper, Mirko}, year={2021} }","short":"J.T. Krüger, K.-P. Hoyer, V. Filor, S. Pramanik, M. Kietzmann, J. Meißner, M. Schaper, Journal of Alloys and Compounds (2021).","apa":"Krüger, J. T., Hoyer, K.-P., Filor, V., Pramanik, S., Kietzmann, M., Meißner, J., & Schaper, M. (2021). Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds, Article 159544. https://doi.org/10.1016/j.jallcom.2021.159544","ama":"Krüger JT, Hoyer K-P, Filor V, et al. Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation. Journal of Alloys and Compounds. Published online 2021. doi:10.1016/j.jallcom.2021.159544","chicago":"Krüger, Jan Tobias, Kay-Peter Hoyer, Viviane Filor, Sudipta Pramanik, Manfred Kietzmann, Jessica Meißner, and Mirko Schaper. “Novel AgCa and AgCaLa Alloys for Fe-Based Bioresorbable Implants with Adapted Degradation.” Journal of Alloys and Compounds, 2021. https://doi.org/10.1016/j.jallcom.2021.159544.","ieee":"J. T. Krüger et al., “Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation,” Journal of Alloys and Compounds, Art. no. 159544, 2021, doi: 10.1016/j.jallcom.2021.159544."},"year":"2021","author":[{"last_name":"Krüger","orcid":"0000-0002-0827-9654","id":"44307","full_name":"Krüger, Jan Tobias","first_name":"Jan Tobias"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"last_name":"Filor","full_name":"Filor, Viviane","first_name":"Viviane"},{"last_name":"Pramanik","full_name":"Pramanik, Sudipta","first_name":"Sudipta"},{"full_name":"Kietzmann, Manfred","last_name":"Kietzmann","first_name":"Manfred"},{"full_name":"Meißner, Jessica","last_name":"Meißner","first_name":"Jessica"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"}],"date_created":"2021-09-09T15:40:39Z","date_updated":"2023-06-01T14:39:34Z","doi":"10.1016/j.jallcom.2021.159544","title":"Novel AgCa and AgCaLa alloys for Fe-based bioresorbable implants with adapted degradation"},{"date_created":"2021-09-16T15:50:59Z","author":[{"full_name":"Voswinkel, Dietrich","id":"52634","last_name":"Voswinkel","first_name":"Dietrich"},{"full_name":"Kloidt, D.","last_name":"Kloidt","first_name":"D."},{"first_name":"Olexandr","id":"43822","full_name":"Grydin, Olexandr","last_name":"Grydin"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"volume":15,"date_updated":"2023-06-01T14:39:15Z","doi":"10.1007/s11740-020-01006-2","title":"Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials","issue":"2","publication_status":"published","publication_identifier":{"issn":["0944-6524","1863-7353"]},"quality_controlled":"1","citation":{"short":"D. Voswinkel, D. Kloidt, O. Grydin, M. Schaper, Production Engineering 15 (2021) 263–270.","bibtex":"@article{Voswinkel_Kloidt_Grydin_Schaper_2021, title={Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials}, volume={15}, DOI={10.1007/s11740-020-01006-2}, number={2}, journal={Production Engineering}, author={Voswinkel, Dietrich and Kloidt, D. and Grydin, Olexandr and Schaper, Mirko}, year={2021}, pages={263–270} }","mla":"Voswinkel, Dietrich, et al. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” Production Engineering, vol. 15, no. 2, 2021, pp. 263–70, doi:10.1007/s11740-020-01006-2.","apa":"Voswinkel, D., Kloidt, D., Grydin, O., & Schaper, M. (2021). Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials. Production Engineering, 15(2), 263–270. https://doi.org/10.1007/s11740-020-01006-2","chicago":"Voswinkel, Dietrich, D. Kloidt, Olexandr Grydin, and Mirko Schaper. “Time Efficient Laser Modification of Steel Surfaces for Advanced Bonding in Hybrid Materials.” Production Engineering 15, no. 2 (2021): 263–70. https://doi.org/10.1007/s11740-020-01006-2.","ieee":"D. Voswinkel, D. Kloidt, O. Grydin, and M. Schaper, “Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials,” Production Engineering, vol. 15, no. 2, pp. 263–270, 2021, doi: 10.1007/s11740-020-01006-2.","ama":"Voswinkel D, Kloidt D, Grydin O, Schaper M. Time efficient laser modification of steel surfaces for advanced bonding in hybrid materials. Production Engineering. 2021;15(2):263-270. doi:10.1007/s11740-020-01006-2"},"intvolume":" 15","page":"263-270","year":"2021","user_id":"43720","department":[{"_id":"158"}],"_id":"24565","language":[{"iso":"eng"}],"article_type":"original","type":"journal_article","publication":"Production Engineering","status":"public","abstract":[{"lang":"eng","text":"AbstractLaser surface treatment of metals is one option to improve their properties for adhesive bonding. In this paper, a pulsed YVO4 Laser source with a wavelength of 1064 nm and a maximum power of 25 W was utilized to increase the surface area of the steel HCT490X in order to improve its bonding properties with a carbon fibre reinforced polymer (CFRP). Investigated was the influence of the scanning speed of the laser source on the bonding properties. For this purpose, the steel surfaces were ablated at a scanning speed between 1500 and 4500 mm/s. Afterwards the components were bonded with the adhesive HexBond™ 677. After lap shear tests were carried out on the specimen, the surfaces were inspected using scanning electron microscopy (SEM). The experiments revealed that the bonding quality can be improved with a high scanning speed, even when the surface is not completely ablated."}]},{"title":"Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte","main_file_link":[{"url":"https://chemistry-europe.onlinelibrary.wiley.com/doi/10.1002/celc.202100216","open_access":"1"}],"doi":"10.1002/celc.202100216","date_updated":"2023-06-01T14:39:27Z","oa":"1","publisher":"Wiley","date_created":"2021-09-16T15:56:58Z","author":[{"first_name":"Katja","full_name":"Engelkemeier, Katja","id":"21743","last_name":"Engelkemeier"},{"full_name":"Sun, Aijia","last_name":"Sun","first_name":"Aijia"},{"last_name":"Voswinkel","id":"52634","full_name":"Voswinkel, Dietrich","first_name":"Dietrich"},{"first_name":"Olexandr","last_name":"Grydin","full_name":"Grydin, Olexandr","id":"43822"},{"id":"43720","full_name":"Schaper, Mirko","last_name":"Schaper","first_name":"Mirko"},{"last_name":"Bremser","full_name":"Bremser, Wolfgang","first_name":"Wolfgang"}],"year":"2021","citation":{"apa":"Engelkemeier, K., Sun, A., Voswinkel, D., Grydin, O., Schaper, M., & Bremser, W. (2021). Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte. ChemElectroChem, 2155–2168. https://doi.org/10.1002/celc.202100216","bibtex":"@article{Engelkemeier_Sun_Voswinkel_Grydin_Schaper_Bremser_2021, title={Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte}, DOI={10.1002/celc.202100216}, journal={ChemElectroChem}, publisher={Wiley}, author={Engelkemeier, Katja and Sun, Aijia and Voswinkel, Dietrich and Grydin, Olexandr and Schaper, Mirko and Bremser, Wolfgang}, year={2021}, pages={2155–2168} }","short":"K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, W. Bremser, ChemElectroChem (2021) 2155–2168.","mla":"Engelkemeier, Katja, et al. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, Wiley, 2021, pp. 2155–68, doi:10.1002/celc.202100216.","ama":"Engelkemeier K, Sun A, Voswinkel D, Grydin O, Schaper M, Bremser W. Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte. ChemElectroChem. Published online 2021:2155-2168. doi:10.1002/celc.202100216","chicago":"Engelkemeier, Katja, Aijia Sun, Dietrich Voswinkel, Olexandr Grydin, Mirko Schaper, and Wolfgang Bremser. “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte.” ChemElectroChem, 2021, 2155–68. https://doi.org/10.1002/celc.202100216.","ieee":"K. Engelkemeier, A. Sun, D. Voswinkel, O. Grydin, M. Schaper, and W. Bremser, “Zinc Anodizing: Structural Diversity of Anodic Zinc Oxide Controlled by the Type of Electrolyte,” ChemElectroChem, pp. 2155–2168, 2021, doi: 10.1002/celc.202100216."},"page":"2155-2168","publication_status":"published","publication_identifier":{"issn":["2196-0216","2196-0216"]},"quality_controlled":"1","article_type":"review","language":[{"iso":"eng"}],"_id":"24566","user_id":"43720","department":[{"_id":"158"},{"_id":"301"}],"status":"public","type":"journal_article","publication":"ChemElectroChem"},{"type":"journal_article","publication":"Materials Science and Engineering: A","status":"public","_id":"23897","user_id":"43720","department":[{"_id":"158"},{"_id":"321"}],"article_number":"141662","language":[{"iso":"eng"}],"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0921-5093"]},"year":"2021","citation":{"ama":"Andreiev A, Hoyer K-P, Dula D, et al. Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A. Published online 2021. doi:10.1016/j.msea.2021.141662","ieee":"A. Andreiev et al., “Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance,” Materials Science and Engineering: A, Art. no. 141662, 2021, doi: 10.1016/j.msea.2021.141662.","chicago":"Andreiev, Anatolii, Kay-Peter Hoyer, Dimitri Dula, Florian Hengsbach, Olexandr Grydin, Yaroslav Frolov, and Mirko Schaper. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 2021. https://doi.org/10.1016/j.msea.2021.141662.","apa":"Andreiev, A., Hoyer, K.-P., Dula, D., Hengsbach, F., Grydin, O., Frolov, Y., & Schaper, M. (2021). Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance. Materials Science and Engineering: A, Article 141662. https://doi.org/10.1016/j.msea.2021.141662","bibtex":"@article{Andreiev_Hoyer_Dula_Hengsbach_Grydin_Frolov_Schaper_2021, title={Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance}, DOI={10.1016/j.msea.2021.141662}, number={141662}, journal={Materials Science and Engineering: A}, author={Andreiev, Anatolii and Hoyer, Kay-Peter and Dula, Dimitri and Hengsbach, Florian and Grydin, Olexandr and Frolov, Yaroslav and Schaper, Mirko}, year={2021} }","mla":"Andreiev, Anatolii, et al. “Laser Beam Melting of Functionally Graded Materials with Application-Adapted Tailoring of Magnetic and Mechanical Performance.” Materials Science and Engineering: A, 141662, 2021, doi:10.1016/j.msea.2021.141662.","short":"A. Andreiev, K.-P. Hoyer, D. Dula, F. Hengsbach, O. Grydin, Y. Frolov, M. Schaper, Materials Science and Engineering: A (2021)."},"date_updated":"2023-06-01T14:40:21Z","date_created":"2021-09-08T07:29:29Z","author":[{"first_name":"Anatolii","full_name":"Andreiev, Anatolii","id":"50215","last_name":"Andreiev"},{"id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer","first_name":"Kay-Peter"},{"first_name":"Dimitri","full_name":"Dula, Dimitri","last_name":"Dula"},{"last_name":"Hengsbach","full_name":"Hengsbach, Florian","first_name":"Florian"},{"full_name":"Grydin, Olexandr","id":"43822","last_name":"Grydin","first_name":"Olexandr"},{"first_name":"Yaroslav","full_name":"Frolov, Yaroslav","last_name":"Frolov"},{"last_name":"Schaper","full_name":"Schaper, Mirko","id":"43720","first_name":"Mirko"}],"title":"Laser beam melting of functionally graded materials with application-adapted tailoring of magnetic and mechanical performance","doi":"10.1016/j.msea.2021.141662"},{"doi":"10.1016/j.ijfatigue.2021.106498","title":"Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy","date_created":"2021-09-08T07:33:06Z","author":[{"first_name":"Sudipta","full_name":"Pramanik, Sudipta","last_name":"Pramanik"},{"id":"50215","full_name":"Andreiev, Anatolii","last_name":"Andreiev","first_name":"Anatolii"},{"first_name":"Kay-Peter","last_name":"Hoyer","full_name":"Hoyer, Kay-Peter","id":"48411"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"date_updated":"2023-06-01T14:40:01Z","citation":{"ama":"Pramanik S, Andreiev A, Hoyer K-P, Schaper M. Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue. Published online 2021. doi:10.1016/j.ijfatigue.2021.106498","chicago":"Pramanik, Sudipta, Anatolii Andreiev, Kay-Peter Hoyer, and Mirko Schaper. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 2021. https://doi.org/10.1016/j.ijfatigue.2021.106498.","ieee":"S. Pramanik, A. Andreiev, K.-P. Hoyer, and M. Schaper, “Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy,” International Journal of Fatigue, Art. no. 106498, 2021, doi: 10.1016/j.ijfatigue.2021.106498.","apa":"Pramanik, S., Andreiev, A., Hoyer, K.-P., & Schaper, M. (2021). Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy. International Journal of Fatigue, Article 106498. https://doi.org/10.1016/j.ijfatigue.2021.106498","mla":"Pramanik, Sudipta, et al. “Quasi In-Situ Analysis of Fracture Path during Cyclic Loading of Double-Edged U Notched Additively Manufactured FeCo Alloy.” International Journal of Fatigue, 106498, 2021, doi:10.1016/j.ijfatigue.2021.106498.","bibtex":"@article{Pramanik_Andreiev_Hoyer_Schaper_2021, title={Quasi in-situ analysis of fracture path during cyclic loading of double-edged U notched additively manufactured FeCo alloy}, DOI={10.1016/j.ijfatigue.2021.106498}, number={106498}, journal={International Journal of Fatigue}, author={Pramanik, Sudipta and Andreiev, Anatolii and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","short":"S. Pramanik, A. Andreiev, K.-P. Hoyer, M. Schaper, International Journal of Fatigue (2021)."},"year":"2021","publication_status":"published","publication_identifier":{"issn":["0142-1123"]},"quality_controlled":"1","language":[{"iso":"eng"}],"article_number":"106498","user_id":"43720","department":[{"_id":"158"},{"_id":"321"}],"_id":"23911","status":"public","type":"journal_article","publication":"International Journal of Fatigue"},{"publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2214-8604"]},"year":"2021","citation":{"short":"S. Pramanik, L. Tasche, K.-P. Hoyer, M. Schaper, Additive Manufacturing (2021).","mla":"Pramanik, Sudipta, et al. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 102087, 2021, doi:10.1016/j.addma.2021.102087.","bibtex":"@article{Pramanik_Tasche_Hoyer_Schaper_2021, title={Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study}, DOI={10.1016/j.addma.2021.102087}, number={102087}, journal={Additive Manufacturing}, author={Pramanik, Sudipta and Tasche, Lennart and Hoyer, Kay-Peter and Schaper, Mirko}, year={2021} }","apa":"Pramanik, S., Tasche, L., Hoyer, K.-P., & Schaper, M. (2021). Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing, Article 102087. https://doi.org/10.1016/j.addma.2021.102087","ama":"Pramanik S, Tasche L, Hoyer K-P, Schaper M. Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study. Additive Manufacturing. Published online 2021. doi:10.1016/j.addma.2021.102087","ieee":"S. Pramanik, L. Tasche, K.-P. Hoyer, and M. Schaper, “Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study,” Additive Manufacturing, Art. no. 102087, 2021, doi: 10.1016/j.addma.2021.102087.","chicago":"Pramanik, Sudipta, Lennart Tasche, Kay-Peter Hoyer, and Mirko Schaper. “Investigating the Microstructure of an Additively Manufactured FeCo Alloy: An Electron Microscopy Study.” Additive Manufacturing, 2021. https://doi.org/10.1016/j.addma.2021.102087."},"date_updated":"2023-06-01T14:39:43Z","author":[{"first_name":"Sudipta","last_name":"Pramanik","full_name":"Pramanik, Sudipta"},{"last_name":"Tasche","full_name":"Tasche, Lennart","first_name":"Lennart"},{"first_name":"Kay-Peter","id":"48411","full_name":"Hoyer, Kay-Peter","last_name":"Hoyer"},{"first_name":"Mirko","last_name":"Schaper","id":"43720","full_name":"Schaper, Mirko"}],"date_created":"2021-09-09T15:46:30Z","title":"Investigating the microstructure of an additively manufactured FeCo alloy: an electron microscopy study","doi":"10.1016/j.addma.2021.102087","type":"journal_article","publication":"Additive Manufacturing","status":"public","_id":"24088","user_id":"43720","department":[{"_id":"158"}],"article_number":"102087","language":[{"iso":"eng"}]},{"citation":{"apa":"Reitz, A., Grydin, O., & Schaper, M. (2021). Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods . Materials Data for Smart Forming Technologies. Meform 2021, Freiberg.","short":"A. Reitz, O. Grydin, M. Schaper, Materials Data for Smart Forming Technologies (2021).","bibtex":"@article{Reitz_Grydin_Schaper_2021, title={Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods }, journal={Materials Data for Smart Forming Technologies}, author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2021} }","mla":"Reitz, Alexander, et al. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” Materials Data for Smart Forming Technologies, 2021.","ama":"Reitz A, Grydin O, Schaper M. Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods . Materials Data for Smart Forming Technologies. Published online 2021.","chicago":"Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization of Phase Transformations during Graded Thermo- Mechanical Treatment of Steel 22MnB5 by Means of Optical Methods .” Materials Data for Smart Forming Technologies, 2021.","ieee":"A. Reitz, O. Grydin, and M. Schaper, “Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ,” Materials Data for Smart Forming Technologies, 2021."},"year":"2021","quality_controlled":"1","publication_status":"published","conference":{"location":"Freiberg","start_date":"2021-03-18","name":"Meform 2021"},"main_file_link":[{"url":"https://tu-freiberg.de/sites/default/files/media/institut-fuer-metallformung-13630/MEFORM2020/meform_2021_journal.pdf","open_access":"1"}],"title":"Characterization of phase transformations during graded thermo- mechanical treatment of steel 22MnB5 by means of optical methods ","date_created":"2021-09-06T13:28:04Z","author":[{"full_name":"Reitz, Alexander","id":"24803","orcid":"0000-0001-9047-467X","last_name":"Reitz","first_name":"Alexander"},{"first_name":"Olexandr","last_name":"Grydin","id":"43822","full_name":"Grydin, Olexandr"},{"first_name":"Mirko","full_name":"Schaper, Mirko","id":"43720","last_name":"Schaper"}],"date_updated":"2023-06-01T14:40:32Z","oa":"1","status":"public","publication":"Materials Data for Smart Forming Technologies","type":"journal_article","language":[{"iso":"eng"}],"department":[{"_id":"158"},{"_id":"321"}],"user_id":"43720","_id":"23803"},{"language":[{"iso":"eng"}],"_id":"21545","user_id":"14931","department":[{"_id":"157"}],"status":"public","type":"journal_article","publication":"Fatigue & Fracture of Engineering Materials & Structures","title":"Service life estimation of self‐piercing riveted joints by linear damage accumulation","main_file_link":[{"open_access":"1"}],"doi":"10.1111/ffe.13446","date_updated":"2023-06-06T14:24:51Z","oa":"1","author":[{"full_name":"Masendorf, Lukas","last_name":"Masendorf","first_name":"Lukas"},{"first_name":"Michael","full_name":"Wächter, Michael","last_name":"Wächter"},{"full_name":"Esderts, Alfons","last_name":"Esderts","first_name":"Alfons"},{"last_name":"Otroshi","orcid":"0000-0002-8652-9209","full_name":"Otroshi, Mortaza","id":"71269","first_name":"Mortaza"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"}],"date_created":"2021-03-19T11:44:35Z","year":"2021","citation":{"ieee":"L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, and G. Meschut, “Service life estimation of self‐piercing riveted joints by linear damage accumulation,” Fatigue & Fracture of Engineering Materials & Structures, p. 15, 2021, doi: 10.1111/ffe.13446.","chicago":"Masendorf, Lukas, Michael Wächter, Alfons Esderts, Mortaza Otroshi, and Gerson Meschut. “Service Life Estimation of Self‐piercing Riveted Joints by Linear Damage Accumulation.” Fatigue & Fracture of Engineering Materials & Structures, 2021, 15. https://doi.org/10.1111/ffe.13446.","ama":"Masendorf L, Wächter M, Esderts A, Otroshi M, Meschut G. Service life estimation of self‐piercing riveted joints by linear damage accumulation. Fatigue & Fracture of Engineering Materials & Structures. Published online 2021:15. doi:10.1111/ffe.13446","bibtex":"@article{Masendorf_Wächter_Esderts_Otroshi_Meschut_2021, title={Service life estimation of self‐piercing riveted joints by linear damage accumulation}, DOI={10.1111/ffe.13446}, journal={Fatigue & Fracture of Engineering Materials & Structures}, author={Masendorf, Lukas and Wächter, Michael and Esderts, Alfons and Otroshi, Mortaza and Meschut, Gerson}, year={2021}, pages={15} }","mla":"Masendorf, Lukas, et al. “Service Life Estimation of Self‐piercing Riveted Joints by Linear Damage Accumulation.” Fatigue & Fracture of Engineering Materials & Structures, 2021, p. 15, doi:10.1111/ffe.13446.","short":"L. Masendorf, M. Wächter, A. Esderts, M. Otroshi, G. Meschut, Fatigue & Fracture of Engineering Materials & Structures (2021) 15.","apa":"Masendorf, L., Wächter, M., Esderts, A., Otroshi, M., & Meschut, G. (2021). Service life estimation of self‐piercing riveted joints by linear damage accumulation. Fatigue & Fracture of Engineering Materials & Structures, 15. https://doi.org/10.1111/ffe.13446"},"page":"15","publication_status":"published","publication_identifier":{"issn":["8756-758X","1460-2695"]},"quality_controlled":"1"},{"citation":{"ama":"Erofeeva M, Klowait NO. The Impact of Virtual Reality, Augmented Reality, and Interactive Whiteboards on the Attention Management in Secondary School STEM Teaching. In: 2021 7th International Conference of the Immersive Learning Research Network (ILRN). IEEE; 2021. doi:10.23919/ilrn52045.2021.9459318","chicago":"Erofeeva, Maria, and Nils Oliver Klowait. “The Impact of Virtual Reality, Augmented Reality, and Interactive Whiteboards on the Attention Management in Secondary School STEM Teaching.” In 2021 7th International Conference of the Immersive Learning Research Network (ILRN). IEEE, 2021. https://doi.org/10.23919/ilrn52045.2021.9459318.","ieee":"M. Erofeeva and N. O. Klowait, “The Impact of Virtual Reality, Augmented Reality, and Interactive Whiteboards on the Attention Management in Secondary School STEM Teaching,” 2021, doi: 10.23919/ilrn52045.2021.9459318.","apa":"Erofeeva, M., & Klowait, N. O. (2021). The Impact of Virtual Reality, Augmented Reality, and Interactive Whiteboards on the Attention Management in Secondary School STEM Teaching. 2021 7th International Conference of the Immersive Learning Research Network (ILRN). https://doi.org/10.23919/ilrn52045.2021.9459318","short":"M. Erofeeva, N.O. Klowait, in: 2021 7th International Conference of the Immersive Learning Research Network (ILRN), IEEE, 2021.","mla":"Erofeeva, Maria, and Nils Oliver Klowait. “The Impact of Virtual Reality, Augmented Reality, and Interactive Whiteboards on the Attention Management in Secondary School STEM Teaching.” 2021 7th International Conference of the Immersive Learning Research Network (ILRN), IEEE, 2021, doi:10.23919/ilrn52045.2021.9459318.","bibtex":"@inproceedings{Erofeeva_Klowait_2021, title={The Impact of Virtual Reality, Augmented Reality, and Interactive Whiteboards on the Attention Management in Secondary School STEM Teaching}, DOI={10.23919/ilrn52045.2021.9459318}, booktitle={2021 7th International Conference of the Immersive Learning Research Network (iLRN)}, publisher={IEEE}, author={Erofeeva, Maria and Klowait, Nils Oliver}, year={2021} }"},"year":"2021","publication_status":"published","doi":"10.23919/ilrn52045.2021.9459318","title":"The Impact of Virtual Reality, Augmented Reality, and Interactive Whiteboards on the Attention Management in Secondary School STEM Teaching","author":[{"full_name":"Erofeeva, Maria","last_name":"Erofeeva","first_name":"Maria"},{"first_name":"Nils Oliver","full_name":"Klowait, Nils Oliver","last_name":"Klowait"}],"date_created":"2023-07-20T11:48:44Z","publisher":"IEEE","date_updated":"2023-08-30T19:30:14Z","status":"public","publication":"2021 7th International Conference of the Immersive Learning Research Network (iLRN)","type":"conference","language":[{"iso":"eng"}],"extern":"1","department":[{"_id":"603"}],"user_id":"98454","_id":"46106"},{"type":"mastersthesis","status":"public","_id":"43005","user_id":"50769","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"language":[{"iso":"ger"}],"place":"Paderborn","year":"2021","citation":{"apa":"Gawlikowicz, R. (2021). Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit).","bibtex":"@book{Gawlikowicz_2021, place={Paderborn}, title={Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit)}, author={Gawlikowicz, Roland}, year={2021} }","short":"R. Gawlikowicz, Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit), Paderborn, 2021.","mla":"Gawlikowicz, Roland. Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit). 2021.","ama":"Gawlikowicz R. Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit).; 2021.","ieee":"R. Gawlikowicz, Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit). Paderborn, 2021.","chicago":"Gawlikowicz, Roland. Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit). Paderborn, 2021."},"date_updated":"2023-09-07T11:59:17Z","supervisor":[{"first_name":"Ivo","full_name":"Kletetzka, Ivo","id":"50769","last_name":"Kletetzka"},{"first_name":"Hans-Joachim","id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921"}],"author":[{"full_name":"Gawlikowicz, Roland","last_name":"Gawlikowicz","first_name":"Roland"}],"date_created":"2023-03-14T09:03:58Z","title":"Untersuchung von Polymer-Dry-Blends und Bewertung ihrer Verarbeitungseigenschaften für den Lasersinterprozess (Studienarbeit)"}]