[{"status":"public","title":"Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters","year":"2019","conference":{"name":"77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","location":"Detroit (USA)"},"author":[{"last_name":"Schöppner","first_name":"Volker","full_name":"Schöppner, Volker","id":"20530"},{"last_name":"Bayazian","first_name":"H.","full_name":"Bayazian, H."},{"full_name":"Yadegari, Ali ","last_name":"Yadegari","first_name":"Ali "}],"date_updated":"2022-01-06T06:57:12Z","language":[{"iso":"eng"}],"_id":"25736","user_id":"44116","publication":"77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","citation":{"ieee":"V. Schöppner, H. Bayazian, and A. Yadegari, “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.","apa":"Schöppner, V., Bayazian, H., &#38; Yadegari, A. (2019). Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters. <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA).","chicago":"Schöppner, Volker, H. Bayazian, and Ali  Yadegari. “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters.” In <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. Detroit (USA), 2019.","short":"V. Schöppner, H. Bayazian, A. Yadegari, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.","mla":"Schöppner, Volker, et al. “Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters.” <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>, 2019.","bibtex":"@inproceedings{Schöppner_Bayazian_Yadegari_2019, place={Detroit (USA)}, title={Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters}, booktitle={77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Schöppner, Volker and Bayazian, H. and Yadegari, Ali }, year={2019} }","ama":"Schöppner V, Bayazian H, Yadegari A. Morphology Development in LLDPE Stretch Films Prepared with Different Cast Film Process Parameters. In: <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. ; 2019."},"place":"Detroit (USA)","date_created":"2021-10-07T09:38:22Z","type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}]},{"_id":"25737","language":[{"iso":"eng"}],"user_id":"44116","title":"New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method","status":"public","year":"2019","author":[{"id":"20530","first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker"},{"full_name":"Sporkmann, F.","first_name":"F.","last_name":"Sporkmann"},{"full_name":"Heide, Alexander ","last_name":"Heide","first_name":"Alexander "}],"conference":{"location":"Cesme (Türkei)","name":"35th International Conference of the Polymer Processing Society (PPS)"},"date_updated":"2022-01-06T06:57:12Z","date_created":"2021-10-07T09:42:14Z","place":"Cesme (Türkei)","type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"publication":"35th International Conference of the Polymer Processing Society (PPS)","citation":{"short":"V. Schöppner, F. Sporkmann, A. Heide, in: 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.","chicago":"Schöppner, Volker, F. Sporkmann, and Alexander  Heide. “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method.” In <i>35th International Conference of the Polymer Processing Society (PPS)</i>. Cesme (Türkei), 2019.","ieee":"V. Schöppner, F. Sporkmann, and A. Heide, “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method,” presented at the 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei), 2019.","apa":"Schöppner, V., Sporkmann, F., &#38; Heide, A. (2019). New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method. <i>35th International Conference of the Polymer Processing Society (PPS)</i>. 35th International Conference of the Polymer Processing Society (PPS), Cesme (Türkei).","bibtex":"@inproceedings{Schöppner_Sporkmann_Heide_2019, place={Cesme (Türkei)}, title={New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method}, booktitle={35th International Conference of the Polymer Processing Society (PPS)}, author={Schöppner, Volker and Sporkmann, F. and Heide, Alexander }, year={2019} }","ama":"Schöppner V, Sporkmann F, Heide A. New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method. In: <i>35th International Conference of the Polymer Processing Society (PPS)</i>. ; 2019.","mla":"Schöppner, Volker, et al. “New Analytical Approach to Calculate the Melt Flow within The Co-Rotating Twin Screw Extruder by Using the Performance Mapping Method.” <i>35th International Conference of the Polymer Processing Society (PPS)</i>, 2019."}},{"date_updated":"2022-01-06T06:57:12Z","status":"public","year":"2019","title":"Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen","conference":{"name":"9. Fügetechnisches Gemeinschaftskolloquium","location":"Braunschweig (Deutschland)"},"author":[{"id":"20531","full_name":"Moritzer, Elmar","first_name":"Elmar","last_name":"Moritzer"},{"first_name":"Christopher","last_name":"Budde","full_name":"Budde, Christopher"},{"full_name":"Hüttner, Matthias","last_name":"Hüttner","first_name":"Matthias"},{"id":"41916","first_name":"Dimitri","last_name":"Krassmann","full_name":"Krassmann, Dimitri"}],"user_id":"41916","language":[{"iso":"eng"}],"_id":"25738","publication":"9. Fügetechnisches Gemeinschaftskolloquium","citation":{"ieee":"E. Moritzer, C. Budde, M. Hüttner, and D. Krassmann, “Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen,” presented at the 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland), 2019.","apa":"Moritzer, E., Budde, C., Hüttner, M., &#38; Krassmann, D. (2019). Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. <i>9. Fügetechnisches Gemeinschaftskolloquium</i>. 9. Fügetechnisches Gemeinschaftskolloquium, Braunschweig (Deutschland).","chicago":"Moritzer, Elmar, Christopher Budde, Matthias Hüttner, and Dimitri Krassmann. “Nieten Im Spritzgießprozess Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen.” In <i>9. Fügetechnisches Gemeinschaftskolloquium</i>, 2019.","short":"E. Moritzer, C. Budde, M. Hüttner, D. Krassmann, in: 9. Fügetechnisches Gemeinschaftskolloquium, 2019.","mla":"Moritzer, Elmar, et al. “Nieten Im Spritzgießprozess Zur Verbindung von Hybridbauteilen Aus Organoblechen Und Metallen.” <i>9. Fügetechnisches Gemeinschaftskolloquium</i>, 2019.","bibtex":"@inproceedings{Moritzer_Budde_Hüttner_Krassmann_2019, title={Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen}, booktitle={9. Fügetechnisches Gemeinschaftskolloquium}, author={Moritzer, Elmar and Budde, Christopher and Hüttner, Matthias and Krassmann, Dimitri}, year={2019} }","ama":"Moritzer E, Budde C, Hüttner M, Krassmann D. Nieten im Spritzgießprozess zur Verbindung von Hybridbauteilen aus Organoblechen und Metallen. In: <i>9. Fügetechnisches Gemeinschaftskolloquium</i>. ; 2019."},"type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-10-07T09:45:12Z"},{"title":"Oberflächennachbearbeitung und Kleben von FDM-Bauteilen","status":"public","year":"2019","author":[{"full_name":"Moritzer, Elmar","first_name":"Elmar","last_name":"Moritzer","id":"20531"},{"first_name":"André","last_name":"Hirsch","full_name":"Hirsch, André","id":"27599"}],"conference":{"name":"DGM-Seminar für Fortgeschrittene","location":"Paderborn (Deutschland)"},"date_updated":"2022-01-06T06:57:12Z","language":[{"iso":"eng"}],"_id":"25745","user_id":"44116","publication":"DGM-Seminar für Fortgeschrittene","citation":{"ama":"Moritzer E, Hirsch A. Oberflächennachbearbeitung und Kleben von FDM-Bauteilen. In: <i>DGM-Seminar Für Fortgeschrittene</i>. ; 2019.","bibtex":"@inproceedings{Moritzer_Hirsch_2019, place={Paderborn (Deutschland)}, title={Oberflächennachbearbeitung und Kleben von FDM-Bauteilen}, booktitle={DGM-Seminar für Fortgeschrittene}, author={Moritzer, Elmar and Hirsch, André}, year={2019} }","mla":"Moritzer, Elmar, and André Hirsch. “Oberflächennachbearbeitung Und Kleben von FDM-Bauteilen.” <i>DGM-Seminar Für Fortgeschrittene</i>, 2019.","chicago":"Moritzer, Elmar, and André Hirsch. “Oberflächennachbearbeitung Und Kleben von FDM-Bauteilen.” In <i>DGM-Seminar Für Fortgeschrittene</i>. Paderborn (Deutschland), 2019.","short":"E. Moritzer, A. Hirsch, in: DGM-Seminar Für Fortgeschrittene, Paderborn (Deutschland), 2019.","apa":"Moritzer, E., &#38; Hirsch, A. (2019). Oberflächennachbearbeitung und Kleben von FDM-Bauteilen. <i>DGM-Seminar Für Fortgeschrittene</i>. DGM-Seminar für Fortgeschrittene, Paderborn (Deutschland).","ieee":"E. Moritzer and A. Hirsch, “Oberflächennachbearbeitung und Kleben von FDM-Bauteilen,” presented at the DGM-Seminar für Fortgeschrittene, Paderborn (Deutschland), 2019."},"date_created":"2021-10-07T10:47:53Z","place":"Paderborn (Deutschland)","type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}]},{"place":"Cesme-Izmir (Türkei)","date_created":"2021-10-07T10:50:37Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"conference","citation":{"chicago":"Schöppner, Volker, H. Bayazian, Ali Yadegari, and Hoda  Haddad. “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters.” In <i>35th PPS</i>. Cesme-Izmir (Türkei), 2019.","short":"V. Schöppner, H. Bayazian, A. Yadegari, H. Haddad, in: 35th PPS, Cesme-Izmir (Türkei), 2019.","ieee":"V. Schöppner, H. Bayazian, A. Yadegari, and H. Haddad, “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.","apa":"Schöppner, V., Bayazian, H., Yadegari, A., &#38; Haddad, H. (2019). Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters. <i>35th PPS</i>. 35th PPS, Cesme-Izmir (Türkei).","bibtex":"@inproceedings{Schöppner_Bayazian_Yadegari_Haddad_2019, place={Cesme-Izmir (Türkei)}, title={Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters}, booktitle={35th PPS}, author={Schöppner, Volker and Bayazian, H. and Yadegari, Ali and Haddad, Hoda }, year={2019} }","ama":"Schöppner V, Bayazian H, Yadegari A, Haddad H. Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters. In: <i>35th PPS</i>. ; 2019.","mla":"Schöppner, Volker, et al. “Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters.” <i>35th PPS</i>, 2019."},"publication":"35th PPS","_id":"25746","language":[{"iso":"eng"}],"user_id":"44116","conference":{"location":"Cesme-Izmir (Türkei)","name":"35th PPS"},"author":[{"full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker","id":"20530"},{"full_name":"Bayazian, H.","first_name":"H.","last_name":"Bayazian"},{"first_name":"Ali","last_name":"Yadegari","full_name":"Yadegari, Ali"},{"full_name":"Haddad, Hoda ","first_name":"Hoda ","last_name":"Haddad"}],"title":"Orientation in LLDPE Cast Films Manufactured under Different Processing Parameters","status":"public","year":"2019","date_updated":"2022-01-06T06:57:12Z"},{"user_id":"44116","_id":"25747","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:57:12Z","year":"2019","title":"Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer","status":"public","conference":{"name":"35th PPS","location":"Cesme-Izmir (Türkei)"},"author":[{"id":"20531","last_name":"Moritzer","first_name":"Elmar","full_name":"Moritzer, Elmar"},{"last_name":"Westhues","first_name":"T.","full_name":"Westhues, T."}],"type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"place":"Cesme-Izmir (Türkei)","date_created":"2021-10-07T10:52:17Z","publication":"35th PPS","citation":{"apa":"Moritzer, E., &#38; Westhues, T. (2019). Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer. <i>35th PPS</i>. 35th PPS, Cesme-Izmir (Türkei).","ieee":"E. Moritzer and T. Westhues, “Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer,” presented at the 35th PPS, Cesme-Izmir (Türkei), 2019.","chicago":"Moritzer, Elmar, and T. Westhues. “Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer.” In <i>35th PPS</i>. Cesme-Izmir (Türkei), 2019.","short":"E. Moritzer, T. Westhues, in: 35th PPS, Cesme-Izmir (Türkei), 2019.","mla":"Moritzer, Elmar, and T. Westhues. “Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer.” <i>35th PPS</i>, 2019.","ama":"Moritzer E, Westhues T. Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer. In: <i>35th PPS</i>. ; 2019.","bibtex":"@inproceedings{Moritzer_Westhues_2019, place={Cesme-Izmir (Türkei)}, title={Plant Design, Stress-Strain Characteristics in Compression and Lifecycle Description of Coiled Filament Mats Based on Production According to Fitzer}, booktitle={35th PPS}, author={Moritzer, Elmar and Westhues, T.}, year={2019} }"}},{"author":[{"full_name":"Moritzer, Elmar","first_name":"Elmar","last_name":"Moritzer","id":"20531"},{"full_name":"Hirsch, André","first_name":"André","last_name":"Hirsch","id":"27599"},{"last_name":"Heim","first_name":"H.-P. ","full_name":"Heim, H.-P. "},{"last_name":"Cherif","first_name":"C. ","full_name":"Cherif, C. "},{"first_name":"W.","last_name":"Truemper","full_name":"Truemper, W."}],"publication_identifier":{"issn":["1878-6669"]},"status":"public","title":"Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites","year":"2019","date_updated":"2022-01-06T06:57:12Z","_id":"25748","language":[{"iso":"eng"}],"page":"867-873","user_id":"44116","citation":{"apa":"Moritzer, E., Hirsch, A., Heim, H.-P., Cherif, C., &#38; Truemper, W. (2019). Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. <i>Welding in the World</i>, 867–873.","ieee":"E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, and W. Truemper, “Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites,” <i>Welding in the World</i>, pp. 867–873, 2019.","short":"E. Moritzer, A. Hirsch, H.-P. Heim, C. Cherif, W. Truemper, Welding in the World (2019) 867–873.","chicago":"Moritzer, Elmar, André Hirsch, H.-P.  Heim, C.  Cherif, and W. Truemper. “Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.” <i>Welding in the World</i>, 2019, 867–73.","mla":"Moritzer, Elmar, et al. “Plastic Droplet Welding: Bond Strength between Plastic Freeforming Structures and Continuous Fiber-Reinforced Thermoplastic Composites.” <i>Welding in the World</i>, 2019, pp. 867–73.","ama":"Moritzer E, Hirsch A, Heim H-P, Cherif C, Truemper W. Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites. <i>Welding in the World</i>. Published online 2019:867-873.","bibtex":"@article{Moritzer_Hirsch_Heim_Cherif_Truemper_2019, title={Plastic droplet welding: bond strength between plastic freeforming structures and continuous fiber-reinforced thermoplastic composites}, journal={Welding in the World}, author={Moritzer, Elmar and Hirsch, André and Heim, H.-P.  and Cherif, C.  and Truemper, W.}, year={2019}, pages={867–873} }"},"publication":"Welding in the World","date_created":"2021-10-07T10:54:53Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"journal_article"},{"user_id":"44116","_id":"25750","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:57:12Z","author":[{"id":"20530","last_name":"Schöppner","first_name":"Volker","full_name":"Schöppner, Volker"},{"full_name":"Sporkmann, F.","first_name":"F.","last_name":"Sporkmann"}],"conference":{"name":"VDI Wissensforum","location":"Stuttgart (Deutschland)"},"title":"Scale up von Doppelschneckenmaschinen","year":"2019","status":"public","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"conference","date_created":"2021-10-07T10:57:30Z","place":"Stuttgart (Deutschland)","citation":{"mla":"Schöppner, Volker, and F. Sporkmann. “Scale up von Doppelschneckenmaschinen.” <i>VDI Wissensforum</i>, 2019.","apa":"Schöppner, V., &#38; Sporkmann, F. (2019). Scale up von Doppelschneckenmaschinen. <i>VDI Wissensforum</i>. VDI Wissensforum, Stuttgart (Deutschland).","ieee":"V. Schöppner and F. Sporkmann, “Scale up von Doppelschneckenmaschinen,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.","short":"V. Schöppner, F. Sporkmann, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.","ama":"Schöppner V, Sporkmann F. Scale up von Doppelschneckenmaschinen. In: <i>VDI Wissensforum</i>. ; 2019.","chicago":"Schöppner, Volker, and F. Sporkmann. “Scale up von Doppelschneckenmaschinen.” In <i>VDI Wissensforum</i>. Stuttgart (Deutschland), 2019.","bibtex":"@inproceedings{Schöppner_Sporkmann_2019, place={Stuttgart (Deutschland)}, title={Scale up von Doppelschneckenmaschinen}, booktitle={VDI Wissensforum}, author={Schöppner, Volker and Sporkmann, F.}, year={2019} }"},"publication":"VDI Wissensforum"},{"date_updated":"2022-01-06T06:57:12Z","title":"Schmelzefilter","year":"2019","status":"public","author":[{"id":"20530","full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner"},{"full_name":"Meilwes, P.","last_name":"Meilwes","first_name":"P."},{"full_name":"Westhues, K.","last_name":"Westhues","first_name":"K."}],"publication_identifier":{"isbn":["978-3-939382-14-0 "]},"user_id":"44116","language":[{"iso":"eng"}],"_id":"25751","series_title":"Technomer ","citation":{"mla":"Schöppner, Volker, et al. <i>Schmelzefilter</i>. 2019.","ama":"Schöppner V, Meilwes P, Westhues K. <i>Schmelzefilter</i>.; 2019.","bibtex":"@book{Schöppner_Meilwes_Westhues_2019, place={Chemnitz (Deutschland)}, series={Technomer }, title={Schmelzefilter}, author={Schöppner, Volker and Meilwes, P. and Westhues, K.}, year={2019}, collection={Technomer } }","apa":"Schöppner, V., Meilwes, P., &#38; Westhues, K. (2019). <i>Schmelzefilter</i>.","ieee":"V. Schöppner, P. Meilwes, and K. Westhues, <i>Schmelzefilter</i>. Chemnitz (Deutschland), 2019.","chicago":"Schöppner, Volker, P. Meilwes, and K. Westhues. <i>Schmelzefilter</i>. Technomer . Chemnitz (Deutschland), 2019.","short":"V. Schöppner, P. Meilwes, K. Westhues, Schmelzefilter, Chemnitz (Deutschland), 2019."},"type":"book","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"place":"Chemnitz (Deutschland)","date_created":"2021-10-07T10:59:37Z"},{"author":[{"id":"20530","first_name":"Volker","last_name":"Schöppner","full_name":"Schöppner, Volker"},{"full_name":"Sporkmann, F.","first_name":"F.","last_name":"Sporkmann"}],"publication_identifier":{"issn":["2053-7174"]},"status":"public","year":"2019","title":"Simulation aids compounding success","date_updated":"2022-01-06T06:57:12Z","language":[{"iso":"eng"}],"_id":"25753","page":"47-56","user_id":"44116","citation":{"bibtex":"@article{Schöppner_Sporkmann_2019, title={Simulation aids compounding success}, journal={Compounding World}, author={Schöppner, Volker and Sporkmann, F.}, year={2019}, pages={47–56} }","ama":"Schöppner V, Sporkmann F. Simulation aids compounding success. <i>Compounding World</i>. Published online 2019:47-56.","mla":"Schöppner, Volker, and F. Sporkmann. “Simulation Aids Compounding Success.” <i>Compounding World</i>, 2019, pp. 47–56.","short":"V. Schöppner, F. Sporkmann, Compounding World (2019) 47–56.","chicago":"Schöppner, Volker, and F. Sporkmann. “Simulation Aids Compounding Success.” <i>Compounding World</i>, 2019, 47–56.","ieee":"V. Schöppner and F. Sporkmann, “Simulation aids compounding success,” <i>Compounding World</i>, pp. 47–56, 2019.","apa":"Schöppner, V., &#38; Sporkmann, F. (2019). Simulation aids compounding success. <i>Compounding World</i>, 47–56."},"publication":"Compounding World","date_created":"2021-10-07T11:02:17Z","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"journal_article"},{"user_id":"44116","_id":"25754","language":[{"iso":"eng"}],"page":"64-67","date_updated":"2022-01-06T06:57:12Z","publication_identifier":{"issn":["1618-8357"]},"author":[{"full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner","id":"20530"},{"full_name":"Brüning, Florian","last_name":"Brüning","first_name":"Florian","id":"72920"}],"status":"public","title":"Simulation der Feststoffförderung im Einschneckenextruder","year":"2019","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"type":"journal_article","date_created":"2021-10-07T11:03:43Z","citation":{"chicago":"Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einschneckenextruder.” <i>WAK Jahresmagazin</i>, 2019, 64–67.","short":"V. Schöppner, F. Brüning, WAK Jahresmagazin (2019) 64–67.","apa":"Schöppner, V., &#38; Brüning, F. (2019). Simulation der Feststoffförderung im Einschneckenextruder. <i>WAK Jahresmagazin</i>, 64–67.","ieee":"V. Schöppner and F. Brüning, “Simulation der Feststoffförderung im Einschneckenextruder,” <i>WAK Jahresmagazin</i>, pp. 64–67, 2019.","ama":"Schöppner V, Brüning F. Simulation der Feststoffförderung im Einschneckenextruder. <i>WAK Jahresmagazin</i>. Published online 2019:64-67.","bibtex":"@article{Schöppner_Brüning_2019, title={Simulation der Feststoffförderung im Einschneckenextruder}, journal={WAK Jahresmagazin}, author={Schöppner, Volker and Brüning, Florian}, year={2019}, pages={64–67} }","mla":"Schöppner, Volker, and Florian Brüning. “Simulation Der Feststoffförderung Im Einschneckenextruder.” <i>WAK Jahresmagazin</i>, 2019, pp. 64–67."},"publication":"WAK Jahresmagazin"},{"year":"2019","title":"Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders","status":"public","author":[{"id":"20531","last_name":"Moritzer","first_name":"Elmar","full_name":"Moritzer, Elmar"},{"full_name":"Wittke, M.","first_name":"M.","last_name":"Wittke"}],"conference":{"location":"Detroit (USA)","name":"77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)"},"date_updated":"2022-01-06T06:57:12Z","_id":"25755","language":[{"iso":"eng"}],"user_id":"44116","publication":"77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","citation":{"chicago":"Moritzer, Elmar, and M. Wittke. “Simulation-Based Optimization of Advanced Mixing Elements on Single Screw Extruders.” In <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. Detroit (USA), 2019.","short":"E. Moritzer, M. Wittke, in: 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.","apa":"Moritzer, E., &#38; Wittke, M. (2019). Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders. <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA).","ieee":"E. Moritzer and M. Wittke, “Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders,” presented at the 77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Detroit (USA), 2019.","ama":"Moritzer E, Wittke M. Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders. In: <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>. ; 2019.","bibtex":"@inproceedings{Moritzer_Wittke_2019, place={Detroit (USA)}, title={Simulation-based Optimization of Advanced Mixing Elements on Single Screw Extruders}, booktitle={77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)}, author={Moritzer, Elmar and Wittke, M.}, year={2019} }","mla":"Moritzer, Elmar, and M. Wittke. “Simulation-Based Optimization of Advanced Mixing Elements on Single Screw Extruders.” <i>77th Annual Technical Conference of the Society of Plastics Engineers (ANTEC)</i>, 2019."},"date_created":"2021-10-07T11:05:24Z","place":"Detroit (USA)","type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}]},{"user_id":"44116","language":[{"iso":"eng"}],"_id":"25756","date_updated":"2022-01-06T06:57:12Z","title":"Spritzgießwerkzeuge mit Heatpipe-Temperierung","status":"public","year":"2019","author":[{"full_name":"Moritzer, Elmar","first_name":"Elmar","last_name":"Moritzer","id":"20531"},{"last_name":"Kartelmeyer","first_name":"S.","full_name":"Kartelmeyer, S."},{"last_name":"Hüttemann","first_name":"B.","full_name":"Hüttemann, B."},{"full_name":"Jaroschek, C.","last_name":"Jaroschek","first_name":"C."}],"conference":{"name":"26. Fachtagung über Verarbeitung und Anwendung von Polymeren","location":"Chemnitz (Deutschland)"},"type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-10-07T11:07:37Z","place":"Chemnitz (Deutschland)","publication":"26. Fachtagung über Verarbeitung und Anwendung von Polymeren","citation":{"ama":"Moritzer E, Kartelmeyer S, Hüttemann B, Jaroschek C. Spritzgießwerkzeuge mit Heatpipe-Temperierung. In: <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>. ; 2019.","bibtex":"@inproceedings{Moritzer_Kartelmeyer_Hüttemann_Jaroschek_2019, place={Chemnitz (Deutschland)}, title={Spritzgießwerkzeuge mit Heatpipe-Temperierung}, booktitle={26. Fachtagung über Verarbeitung und Anwendung von Polymeren}, author={Moritzer, Elmar and Kartelmeyer, S. and Hüttemann, B. and Jaroschek, C.}, year={2019} }","mla":"Moritzer, Elmar, et al. “Spritzgießwerkzeuge Mit Heatpipe-Temperierung.” <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>, 2019.","short":"E. Moritzer, S. Kartelmeyer, B. Hüttemann, C. Jaroschek, in: 26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.","chicago":"Moritzer, Elmar, S. Kartelmeyer, B. Hüttemann, and C. Jaroschek. “Spritzgießwerkzeuge Mit Heatpipe-Temperierung.” In <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>. Chemnitz (Deutschland), 2019.","apa":"Moritzer, E., Kartelmeyer, S., Hüttemann, B., &#38; Jaroschek, C. (2019). Spritzgießwerkzeuge mit Heatpipe-Temperierung. <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>. 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland).","ieee":"E. Moritzer, S. Kartelmeyer, B. Hüttemann, and C. Jaroschek, “Spritzgießwerkzeuge mit Heatpipe-Temperierung,” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019."}},{"publication":"PU MAGAZIN","citation":{"mla":"Moritzer, Elmar, et al. “Untersuchung Der Verbundhaftung Zwischen Spritzgegossenen TPUs Und Einer Reaktiven, Gießfähigen Polyurethanmasse.” <i>PU MAGAZIN</i>, 2019, pp. 220–24.","bibtex":"@article{Moritzer_Jilg_Sibbe_2019, title={Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse}, journal={PU MAGAZIN}, author={Moritzer, Elmar and Jilg, J. and Sibbe, N.}, year={2019}, pages={220–224} }","ama":"Moritzer E, Jilg J, Sibbe N. Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse. <i>PU MAGAZIN</i>. Published online 2019:220-224.","ieee":"E. Moritzer, J. Jilg, and N. Sibbe, “Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse,” <i>PU MAGAZIN</i>, pp. 220–224, 2019.","apa":"Moritzer, E., Jilg, J., &#38; Sibbe, N. (2019). Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse. <i>PU MAGAZIN</i>, 220–224.","short":"E. Moritzer, J. Jilg, N. Sibbe, PU MAGAZIN (2019) 220–224.","chicago":"Moritzer, Elmar, J. Jilg, and N. Sibbe. “Untersuchung Der Verbundhaftung Zwischen Spritzgegossenen TPUs Und Einer Reaktiven, Gießfähigen Polyurethanmasse.” <i>PU MAGAZIN</i>, 2019, 220–24."},"type":"journal_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2021-10-07T11:09:51Z","date_updated":"2022-01-06T06:57:12Z","status":"public","title":"Untersuchung der Verbundhaftung zwischen spritzgegossenen TPUs und einer reaktiven, gießfähigen Polyurethanmasse","year":"2019","author":[{"first_name":"Elmar","last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531"},{"first_name":"J.","last_name":"Jilg","full_name":"Jilg, J."},{"full_name":"Sibbe, N.","last_name":"Sibbe","first_name":"N."}],"user_id":"44116","page":"220-224","_id":"25757","language":[{"iso":"eng"}]},{"publication":"VDI Wissensforum","citation":{"ieee":"V. Schöppner and K. Westhues, “Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern,” presented at the VDI Wissensforum, Stuttgart (Deutschland), 2019.","apa":"Schöppner, V., &#38; Westhues, K. (2019). Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern. <i>VDI Wissensforum</i>. VDI Wissensforum, Stuttgart (Deutschland).","short":"V. Schöppner, K. Westhues, in: VDI Wissensforum, Stuttgart (Deutschland), 2019.","chicago":"Schöppner, Volker, and K. Westhues. “Vortrag „Aufschmelzen“ Optimierter Betrieb Und Scale-up von Doppelschnecken-Extrudern.” In <i>VDI Wissensforum</i>. Stuttgart (Deutschland), 2019.","mla":"Schöppner, Volker, and K. Westhues. “Vortrag „Aufschmelzen“ Optimierter Betrieb Und Scale-up von Doppelschnecken-Extrudern.” <i>VDI Wissensforum</i>, 2019.","bibtex":"@inproceedings{Schöppner_Westhues_2019, place={Stuttgart (Deutschland)}, title={Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern}, booktitle={VDI Wissensforum}, author={Schöppner, Volker and Westhues, K.}, year={2019} }","ama":"Schöppner V, Westhues K. Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern. In: <i>VDI Wissensforum</i>. ; 2019."},"type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"place":"Stuttgart (Deutschland)","date_created":"2021-10-07T11:11:39Z","date_updated":"2022-01-06T06:57:12Z","title":"Vortrag „Aufschmelzen“ Optimierter Betrieb und Scale-up von Doppelschnecken-Extrudern","status":"public","year":"2019","conference":{"name":"VDI Wissensforum","location":"Stuttgart (Deutschland)"},"author":[{"id":"20530","full_name":"Schöppner, Volker","last_name":"Schöppner","first_name":"Volker"},{"full_name":"Westhues, K.","first_name":"K.","last_name":"Westhues"}],"user_id":"44116","language":[{"iso":"eng"}],"_id":"25759"},{"place":"Chemnitz (Deutschland)","date_created":"2021-10-07T11:13:36Z","type":"conference","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"publication":"26. Fachtagung über Verarbeitung und Anwendung von Polymeren","citation":{"ama":"Moritzer E, Jilg J. Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC). In: <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>. ; 2019.","bibtex":"@inproceedings{Moritzer_Jilg_2019, place={Chemnitz (Deutschland)}, title={Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC)}, booktitle={26. Fachtagung über Verarbeitung und Anwendung von Polymeren}, author={Moritzer, Elmar and Jilg, J.}, year={2019} }","mla":"Moritzer, Elmar, and J. Jilg. “Zur Wirkung Dehnströmungsinduzierender Spritzgießdüsen Für Glasfaserverstärktes Polypropylen Im Sonderverfahren Der Spritzgießdirektcompoundierung (SGDC).” <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>, 2019.","chicago":"Moritzer, Elmar, and J. Jilg. “Zur Wirkung Dehnströmungsinduzierender Spritzgießdüsen Für Glasfaserverstärktes Polypropylen Im Sonderverfahren Der Spritzgießdirektcompoundierung (SGDC).” In <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>. Chemnitz (Deutschland), 2019.","short":"E. Moritzer, J. Jilg, in: 26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren, Chemnitz (Deutschland), 2019.","apa":"Moritzer, E., &#38; Jilg, J. (2019). Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC). <i>26. Fachtagung Über Verarbeitung Und Anwendung von Polymeren</i>. 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland).","ieee":"E. Moritzer and J. Jilg, “Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC),” presented at the 26. Fachtagung über Verarbeitung und Anwendung von Polymeren, Chemnitz (Deutschland), 2019."},"language":[{"iso":"eng"}],"_id":"25760","user_id":"44116","title":"Zur Wirkung dehnströmungsinduzierender Spritzgießdüsen für glasfaserverstärktes Polypropylen im Sonderverfahren der Spritzgießdirektcompoundierung (SGDC)","status":"public","year":"2019","conference":{"name":"26. Fachtagung über Verarbeitung und Anwendung von Polymeren","location":"Chemnitz (Deutschland)"},"publication_identifier":{"isbn":["978-3-939382-14-0"]},"author":[{"full_name":"Moritzer, Elmar","first_name":"Elmar","last_name":"Moritzer","id":"20531"},{"full_name":"Jilg, J.","last_name":"Jilg","first_name":"J."}],"date_updated":"2022-01-06T06:57:12Z"},{"citation":{"mla":"Aydinöz, Mehmet Esat. <i>Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung</i>. 2019.","apa":"Aydinöz, M. E. (2019). <i>Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung</i> (Vol. 10).","ieee":"M. E. Aydinöz, <i>Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung</i>, vol. 10. 2019.","chicago":"Aydinöz, Mehmet Esat. <i>Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung</i>. Vol. 10. Forschungsberichte des Direct Manufacturing Research Centers, 2019.","ama":"Aydinöz ME. <i>Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung</i>. Vol 10.; 2019.","short":"M.E. Aydinöz, Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung, 2019.","bibtex":"@book{Aydinöz_2019, series={Forschungsberichte des Direct Manufacturing Research Centers}, title={Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung}, volume={10}, author={Aydinöz, Mehmet Esat}, year={2019}, collection={Forschungsberichte des Direct Manufacturing Research Centers} }"},"abstract":[{"text":"Im Rahmen dieser Arbeit wurden die mikrostrukturelle Entwicklung und die daraus resultierenden mechanischen Eigenschaften der im SLM® Verfahren (Selective Laser Melting) verarbeiteten Nickelbasis-Superlegierung Inconel 718 untersucht. Anschließend wurde der Einfluss des HIP-Prozesses (Heißisostatisches Pressen) auf die Porosität, die Mikrostruktur und die mechanischen Eigenschaften analysiert. Da der HIP-Prozess oberflächennahe Poren nicht schließen kann, wurden ausgewählte Proben durch das Arc-PVD-Verfahren (Physical Vapor Deposition) mit einer Ni-20Cr Beschichtung gekapselt. Da die typischen Zellstrukturen zusammen mit den γ´´- Ausscheidungen nach dem Lösungsglühen mit anschließender Ausscheidungshärtung auftreten, konnte die höchste Streckgrenze (Rp0,2) unter quasistatischer Belastung bei Raumtemperatur (RT) sowie bei 650 °C ermittelt werden. Unter zyklischer Belastung zeigen die beschichteten und heißisostatisch gepressten Proben die geringste Ermüdungsfestigkeit bei RT, sowohl vor als auch nach der Ausscheidungshärtung. Im lösungsgeglühten und anschließend ausscheidungsgehärteten Zustand weist das Material die höchste Lebensdauer, insbesondere bei einer niedrigen Dehnungsamplitude (Δε/2 = ±0,35 %), bei 650 °C auf.","lang":"ger"}],"date_created":"2021-10-26T13:30:14Z","type":"dissertation","keyword":["Additive Fertigung","Laserschmelzverfahren","Nickelbasis-Superlegierung","Inconel 718","Mikrostruktur","mechanische Eigenschaften","Heißisostatisches Pressen","Beschichtung"],"department":[{"_id":"9"},{"_id":"158"},{"_id":"219"}],"status":"public","year":"2019","title":"Mikrostrukturelle und mechanische Eigenschaften der im Laserschmelzverfahren verarbeiteten Inconel 718 Nickelbasis-Superlegierung","publication_identifier":{"isbn":["\t978-3-8440-6475-9"]},"author":[{"last_name":"Aydinöz","first_name":"Mehmet Esat","full_name":"Aydinöz, Mehmet Esat"}],"publication_status":"published","date_updated":"2022-01-06T06:57:30Z","intvolume":"        10","page":"118","language":[{"iso":"ger"}],"_id":"26898","series_title":"Forschungsberichte des Direct Manufacturing Research Centers","user_id":"77250","volume":10},{"title":"Einstieg in die Plattformökonomie","status":"public","year":"2019","author":[{"full_name":"Drewel, Marvin","last_name":"Drewel","first_name":"Marvin"},{"full_name":"Gausemeier, Jürgen","first_name":"Jürgen","last_name":"Gausemeier"},{"last_name":"Vaßholz","first_name":"Mareen","full_name":"Vaßholz, Mareen"},{"full_name":"Homburg, Nils","first_name":"Nils","last_name":"Homburg"}],"date_updated":"2022-01-06T06:57:34Z","_id":"27101","language":[{"iso":"eng"}],"publisher":"Heinz Nixdorf Institut","user_id":"21240","editor":[{"first_name":"Jürgen","last_name":"Gausemeier","full_name":"Gausemeier, Jürgen"},{"last_name":"Bauer","first_name":"Wilhelm","full_name":"Bauer, Wilhelm"},{"first_name":"Roman","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman"}],"publication":"Symposium für Vorausschau und Technologieplanung, Band 15","citation":{"ieee":"M. Drewel, J. Gausemeier, M. Vaßholz, and N. Homburg, “Einstieg in die Plattformökonomie,” in <i>Symposium für Vorausschau und Technologieplanung, Band 15</i>, 2019.","apa":"Drewel, M., Gausemeier, J., Vaßholz, M., &#38; Homburg, N. (2019). Einstieg in die Plattformökonomie. In J. Gausemeier, W. Bauer, &#38; R. Dumitrescu (Eds.), <i>Symposium für Vorausschau und Technologieplanung, Band 15</i>. Heinz Nixdorf Institut.","short":"M. Drewel, J. Gausemeier, M. Vaßholz, N. Homburg, in: J. Gausemeier, W. Bauer, R. Dumitrescu (Eds.), Symposium Für Vorausschau Und Technologieplanung, Band 15, Heinz Nixdorf Institut, 2019.","chicago":"Drewel, Marvin, Jürgen Gausemeier, Mareen Vaßholz, and Nils Homburg. “Einstieg in Die Plattformökonomie.” In <i>Symposium Für Vorausschau Und Technologieplanung, Band 15</i>, edited by Jürgen Gausemeier, Wilhelm Bauer, and Roman Dumitrescu. Heinz Nixdorf Institut, 2019.","mla":"Drewel, Marvin, et al. “Einstieg in Die Plattformökonomie.” <i>Symposium Für Vorausschau Und Technologieplanung, Band 15</i>, edited by Jürgen Gausemeier et al., Heinz Nixdorf Institut, 2019.","bibtex":"@inproceedings{Drewel_Gausemeier_Vaßholz_Homburg_2019, title={Einstieg in die Plattformökonomie}, booktitle={Symposium für Vorausschau und Technologieplanung, Band 15}, publisher={Heinz Nixdorf Institut}, author={Drewel, Marvin and Gausemeier, Jürgen and Vaßholz, Mareen and Homburg, Nils}, editor={Gausemeier, Jürgen and Bauer, Wilhelm and Dumitrescu, Roman}, year={2019} }","ama":"Drewel M, Gausemeier J, Vaßholz M, Homburg N. Einstieg in die Plattformökonomie. In: Gausemeier J, Bauer W, Dumitrescu R, eds. <i>Symposium Für Vorausschau Und Technologieplanung, Band 15</i>. Heinz Nixdorf Institut; 2019."},"date_created":"2021-11-03T10:54:12Z","type":"conference","department":[{"_id":"676"}]},{"user_id":"21240","page":"30-34","main_file_link":[{"url":"https://www.researchgate.net/publication/336273262_Erfolg_versprechende_Industrie_40-Zielposition"}],"language":[{"iso":"eng"}],"_id":"27102","date_updated":"2022-01-06T06:57:34Z","year":"2019","status":"public","title":"Erfolg versprechende Industrie 4.0-Zielposition - Ermittlung unter Berücksichtigung zukünftiger Umfeldentwicklungen","author":[{"full_name":"Pierenkemper, Christoph","first_name":"Christoph","last_name":"Pierenkemper"},{"id":"33669","last_name":"Reinhold","first_name":"Jannik","full_name":"Reinhold, Jannik"},{"first_name":"Roman","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","id":"16190"},{"first_name":"Jürgen","last_name":"Gausemeier","full_name":"Gausemeier, Jürgen"}],"type":"journal_article","department":[{"_id":"676"}],"date_created":"2021-11-03T10:58:34Z","abstract":[{"lang":"eng","text":"Mithilfe von Industrie 4.0-Reifegradmodellen können Unternehmen ihren Leistungsstand im Kontext Industrie 4.0 systematisch erfassen. Mit der Ermittlung des Status Quos ist in aller Regel die Frage verbunden „Wo wollen wir zukünftig hin?“. Vor dem Hintergrund, dass Unternehmen aus unterschiedlichen Gründen nicht immer das grundsätzlich Mögliche einführen können, ist die Beantwortung dieser Frage nicht trivial. Ist sich ein Unternehmen über seine I4.0-Zielposition vermeintlich im Klaren, führen äußere Einflüsse häufig dazu, dass die Zielerreichung erschwert wird, was oftmals eine Anpassung der Zielposition zur Folge hat. Es gilt also, diese Umstände bereits in der Planung zu berücksichtigen. Der vorliegende Beitrag zeigt auf, wie Umfeldentwicklungen bei der Ermittlung einer Erfolg versprechenden I4.0-Zielposition von Unternehmen einbezogen werden können."}],"publication":"Industrie 4.0 Management (5)","citation":{"ama":"Pierenkemper C, Reinhold J, Dumitrescu R, Gausemeier J. Erfolg versprechende Industrie 4.0-Zielposition - Ermittlung unter Berücksichtigung zukünftiger Umfeldentwicklungen. <i>Industrie 40 Management (5)</i>. Published online 2019:30-34.","bibtex":"@article{Pierenkemper_Reinhold_Dumitrescu_Gausemeier_2019, title={Erfolg versprechende Industrie 4.0-Zielposition - Ermittlung unter Berücksichtigung zukünftiger Umfeldentwicklungen}, journal={Industrie 4.0 Management (5)}, author={Pierenkemper, Christoph and Reinhold, Jannik and Dumitrescu, Roman and Gausemeier, Jürgen}, year={2019}, pages={30–34} }","mla":"Pierenkemper, Christoph, et al. “Erfolg Versprechende Industrie 4.0-Zielposition - Ermittlung Unter Berücksichtigung Zukünftiger Umfeldentwicklungen.” <i>Industrie 4.0 Management (5)</i>, 2019, pp. 30–34.","short":"C. Pierenkemper, J. Reinhold, R. Dumitrescu, J. Gausemeier, Industrie 4.0 Management (5) (2019) 30–34.","chicago":"Pierenkemper, Christoph, Jannik Reinhold, Roman Dumitrescu, and Jürgen Gausemeier. “Erfolg Versprechende Industrie 4.0-Zielposition - Ermittlung Unter Berücksichtigung Zukünftiger Umfeldentwicklungen.” <i>Industrie 4.0 Management (5)</i>, 2019, 30–34.","apa":"Pierenkemper, C., Reinhold, J., Dumitrescu, R., &#38; Gausemeier, J. (2019). Erfolg versprechende Industrie 4.0-Zielposition - Ermittlung unter Berücksichtigung zukünftiger Umfeldentwicklungen. <i>Industrie 4.0 Management (5)</i>, 30–34.","ieee":"C. Pierenkemper, J. Reinhold, R. Dumitrescu, and J. Gausemeier, “Erfolg versprechende Industrie 4.0-Zielposition - Ermittlung unter Berücksichtigung zukünftiger Umfeldentwicklungen,” <i>Industrie 4.0 Management (5)</i>, pp. 30–34, 2019."}},{"date_created":"2021-11-03T11:07:06Z","department":[{"_id":"676"}],"type":"conference","citation":{"apa":"Massmann, M., Meyer, M., Dumitrescu, R., von Enzberg, S., Frank, M., Koldewey, C., Kühn, A., &#38; Reinhold, J. (2019). Significance and Challenges of Data-driven Product Generation and Retrofit Planning. <i>Proceedings of the CIRP DESIGN</i>.","mla":"Massmann, Melina, et al. “Significance and Challenges of Data-Driven Product Generation and Retrofit Planning.” <i>Proceedings of the CIRP DESIGN</i>, Scientific Technical Committee Design of the International Academy for Production Engineering (CIRP), 2019.","ieee":"M. Massmann <i>et al.</i>, “Significance and Challenges of Data-driven Product Generation and Retrofit Planning,” 2019.","chicago":"Massmann, Melina, Maurice Meyer, Roman Dumitrescu, Sebastian von Enzberg, Maximilian Frank, Christian Koldewey, Arno Kühn, and Jannik Reinhold. “Significance and Challenges of Data-Driven Product Generation and Retrofit Planning.” In <i>Proceedings of the CIRP DESIGN</i>. Scientific Technical Committee Design of the International Academy for Production Engineering (CIRP), 2019.","ama":"Massmann M, Meyer M, Dumitrescu R, et al. Significance and Challenges of Data-driven Product Generation and Retrofit Planning. In: <i>Proceedings of the CIRP DESIGN</i>. Scientific Technical Committee Design of the International Academy for Production Engineering (CIRP); 2019.","short":"M. Massmann, M. Meyer, R. Dumitrescu, S. von Enzberg, M. Frank, C. Koldewey, A. Kühn, J. Reinhold, in: Proceedings of the CIRP DESIGN, Scientific Technical Committee Design of the International Academy for Production Engineering (CIRP), 2019.","bibtex":"@inproceedings{Massmann_Meyer_Dumitrescu_von Enzberg_Frank_Koldewey_Kühn_Reinhold_2019, title={Significance and Challenges of Data-driven Product Generation and Retrofit Planning}, booktitle={Proceedings of the CIRP DESIGN}, publisher={Scientific Technical Committee Design of the International Academy for Production Engineering (CIRP)}, author={Massmann, Melina and Meyer, Maurice and Dumitrescu, Roman and von Enzberg, Sebastian and Frank, Maximilian and Koldewey, Christian and Kühn, Arno and Reinhold, Jannik}, year={2019} }"},"publication":"Proceedings of the CIRP DESIGN","abstract":[{"text":"One of the notable drivers of the fourth industrial revolution is the collection of vast amounts of data along the entire lifecycle of a product. The analysis of product lifecycle data in conjunction with product hypotheses leads to promising potentials in strategic product planning. In this thesis paper, we postulate the need for data-driven product generation and retrofit planning as an interdisciplinary field of research. We define and analyze the key concepts and derive requirements in a structured way. Based on an exhaustive research of existing approaches, we structure open research questions and propose a roadmap in order to shape future research efforts.\r\n","lang":"eng"}],"_id":"27103","language":[{"iso":"eng"}],"publisher":"Scientific Technical Committee Design of the International Academy for Production Engineering (CIRP)","user_id":"21240","author":[{"last_name":"Massmann","first_name":"Melina","full_name":"Massmann, Melina"},{"full_name":"Meyer, Maurice","orcid":"0000-0003-0606-7321","last_name":"Meyer","first_name":"Maurice","id":"77201"},{"first_name":"Roman","last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","id":"16190"},{"full_name":"von Enzberg, Sebastian","last_name":"von Enzberg","first_name":"Sebastian"},{"id":"38255","full_name":"Frank, Maximilian","last_name":"Frank","first_name":"Maximilian"},{"full_name":"Koldewey, Christian","last_name":"Koldewey","first_name":"Christian","orcid":"https://orcid.org/0000-0001-7992-6399","id":"43136"},{"first_name":"Arno","last_name":"Kühn","full_name":"Kühn, Arno"},{"full_name":"Reinhold, Jannik","last_name":"Reinhold","first_name":"Jannik","id":"33669"}],"year":"2019","title":"Significance and Challenges of Data-driven Product Generation and Retrofit Planning","status":"public","date_updated":"2022-01-06T06:57:34Z"}]