[{"abstract":[{"lang":"eng","text":"This paper reports on the experimental development and the theoretical analysis of the scanning laser epitaxy (SLE) process that is currently being investigated and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing process for deposition of equiaxed, directionally solidified and single-crystal nickel superalloys onto superalloy substrates through the selective melting and re-solidification of superalloy powders. The thermal modeling of the system, done in a commercial CFD software package, simulates a heat source moving over a powder bed and considers the approximate change in the property values for consolidating CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the melting temperature criteria and the resulting plots are presented alongside matching experimental micrographs obtained through cross-sectional metallography. The influence of the processing parameters on the microstructural evolution, as evidenced through observations made from the micrographs, is discussed. This work is sponsored by the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526."}],"citation":{"mla":"Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively Manufactured Components.” <i>29th Annual International Solid Freeform Fabrication Symposium</i>, vol. 29, 2018, doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.","bibtex":"@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based Design Check of Additively Manufactured Components}, volume={29}, DOI={<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>}, booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski, Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018} }","ama":"Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design Check of Additively Manufactured Components. In: <i>29th Annual International Solid Freeform Fabrication Symposium</i>. Vol 29. ; 2018. doi:<a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>","ieee":"J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based Design Check of Additively Manufactured Components,” in <i>29th Annual International Solid Freeform Fabrication Symposium</i>, 2018, vol. 29.","apa":"Tominski, J., Lammers, S., Wulf, C., &#38; Zimmer, D. (2018). Method for a Software-based Design Check of Additively Manufactured Components. In <i>29th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 29). <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>","chicago":"Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer. “Method for a Software-Based Design Check of Additively Manufactured Components.” In <i>29th Annual International Solid Freeform Fabrication Symposium</i>, Vol. 29, 2018. <a href=\"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf\">http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf</a>.","short":"J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International Solid Freeform Fabrication Symposium, 2018."},"publication":"29th Annual International Solid Freeform Fabrication Symposium","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"conference","date_created":"2021-06-15T11:10:06Z","intvolume":"        29","date_updated":"2022-01-06T06:55:33Z","author":[{"full_name":"Tominski, Johannes","last_name":"Tominski","first_name":"Johannes"},{"id":"13835","last_name":"Lammers","first_name":"Stefan","full_name":"Lammers, Stefan"},{"last_name":"Wulf","first_name":"Christian","full_name":"Wulf, Christian"},{"full_name":"Zimmer, Detmar","last_name":"Zimmer","first_name":"Detmar","id":"604"}],"title":"Method for a Software-based Design Check of Additively Manufactured Components","status":"public","year":"2018","volume":29,"doi":"http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf","user_id":"38077","_id":"22434","language":[{"iso":"eng"}]},{"date_updated":"2022-01-06T06:55:33Z","title":"Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren","status":"public","year":"2018","author":[{"id":"13226","full_name":"Künneke, Thomas","last_name":"Künneke","first_name":"Thomas"},{"first_name":"Sonja","last_name":"Bücker","full_name":"Bücker, Sonja"},{"full_name":"Lieneke, Tobias","first_name":"Tobias","last_name":"Lieneke","id":"13956"},{"full_name":"Zimmer, Detmar","first_name":"Detmar","last_name":"Zimmer","id":"604"}],"publication_identifier":{"isbn":["978-3-446-45812-3"]},"doi":"10.3139/9783446458123.008","user_id":"38077","page":"128-143","publisher":"Carl Hanser Verlag GmbH & Co. KG","_id":"22435","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"In der Industrie entsteht aufgrund des dynamischen Wettbewerbsumfelds ein zunehmender Drang nach verkürzten Produktentstehungszeiten, hoher Funktionsintegration und individualisierten Produkten. Mithin erlangen additive Fertigungsverfahren eine zunehmende industrielle Bedeutung. Das Laser-Strahlschmelzen (LBM) als additives Verfahren ist hierbei beispielhaft hervorzuheben, da es bereits im Bereich des Prototypenbaus und der Kleinserienfertigung ein etabliertes Verfahren ist, das an der Schwelle zum Einsatz in der Serienproduktion steht. Entscheidendes Hemmnis für den Einsatz der additiven Fertigungsverfahren bildet die fehlende methodische Ausnutzung der gestalterischen Freiheiten und Randbedingungen durch die vergleichsweise neuartige Gruppe an Fertigungsverfahren im gesamten Produktentstehungsprozess. In der Produktentwicklung bildet die Konstruktionsmethodik einen möglichen Ansatz, um gestalterische Freiheiten und Vorteile additiver Fertigungsverfahren bereits in frühen Phasen der Entwicklung gezielt zu berücksichtigen. Hierfür werden aufgrund bestehender und allgemein anerkannter Konstruktionsmethoden (z.B. VDI2221, Pahl/Beitz, etc.) Anknüpfungspunkte aufgezeigt, die eine Implementierung, speziell des Laser-Strahlschmelzens, ermöglichen. Besonderes Augenmerk wird in dieser Veröffentlichung auf die beiden Konstruktionsphasen Konzeption und Gestaltung gelegt. Hierzu werden Ergänzungen oder Anpassungen der bestehenden Konstruktionsmethoden vorgestellt. In besonderer Weise wird dabei auf die Einbringung und die Vorteile der additiven Fertigungsverfahren eingegangen."}],"publication":"Proceedings of the 15th Rapid.Tech Conference","citation":{"ama":"Künneke T, Bücker S, Lieneke T, Zimmer D. Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In: <i>Proceedings of the 15th Rapid.Tech Conference</i>. Carl Hanser Verlag GmbH &#38; Co. KG; 2018:128-143. doi:<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>","bibtex":"@inproceedings{Künneke_Bücker_Lieneke_Zimmer_2018, title={Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren}, DOI={<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>}, booktitle={Proceedings of the 15th Rapid.Tech Conference}, publisher={Carl Hanser Verlag GmbH &#38; Co. KG}, author={Künneke, Thomas and Bücker, Sonja and Lieneke, Tobias and Zimmer, Detmar}, year={2018}, pages={128–143} }","mla":"Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” <i>Proceedings of the 15th Rapid.Tech Conference</i>, Carl Hanser Verlag GmbH &#38; Co. KG, 2018, pp. 128–43, doi:<a href=\"https://doi.org/10.3139/9783446458123.008\">10.3139/9783446458123.008</a>.","short":"T. Künneke, S. Bücker, T. Lieneke, D. Zimmer, in: Proceedings of the 15th Rapid.Tech Conference, Carl Hanser Verlag GmbH &#38; Co. KG, 2018, pp. 128–143.","chicago":"Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.” In <i>Proceedings of the 15th Rapid.Tech Conference</i>, 128–43. Carl Hanser Verlag GmbH &#38; Co. KG, 2018. <a href=\"https://doi.org/10.3139/9783446458123.008\">https://doi.org/10.3139/9783446458123.008</a>.","apa":"Künneke, T., Bücker, S., Lieneke, T., &#38; Zimmer, D. (2018). Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren. In <i>Proceedings of the 15th Rapid.Tech Conference</i> (pp. 128–143). Carl Hanser Verlag GmbH &#38; Co. KG. <a href=\"https://doi.org/10.3139/9783446458123.008\">https://doi.org/10.3139/9783446458123.008</a>","ieee":"T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in <i>Proceedings of the 15th Rapid.Tech Conference</i>, 2018, pp. 128–143."},"type":"conference","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"date_created":"2021-06-15T11:10:08Z"},{"publication":"ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb","issue":"11","citation":{"mla":"Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i>, vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>.","bibtex":"@article{Jacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title={Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung}, volume={113}, DOI={<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>}, number={11}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Carl Hanser Verlag}, author={Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela}, year={2018}, pages={742–745} }","ama":"Jacob A, Künneke T, Lieneke T, et al. Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. <i>ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>. 2018;113(11):742-745. doi:<a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>","ieee":"A. Jacob <i>et al.</i>, “Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung,” <i>ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>, vol. 113, no. 11, pp. 742–745, 2018.","apa":"Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D., &#38; Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung. <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i>, <i>113</i>(11), 742–745. <a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>","short":"A. Jacob, T. Künneke, T. Lieneke, T. Baumann, N. Stricker, D. Zimmer, G. Lanza, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113 (2018) 742–745.","chicago":"Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung Für Die Additive Fertigung.” <i>ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb</i> 113, no. 11 (2018): 742–45. <a href=\"https://doi.org/10.3139/104.112005\">https://doi.org/10.3139/104.112005</a>."},"abstract":[{"lang":"eng","text":"Die Additive Fertigung eröffnet neue Freiheitsgrade in der Produktentwicklung. Unsicherheiten über die Wirtschaftlichkeit und Leistungsfähigkeit der aus der Konstruktion ableitbaren Fertigungstechnologieketten sind zu beachten. In diesem Beitrag wird eine Methode vorgestellt, welche die Anpassung einer bestehenden Konstruktionsmethode berücksichtigt und eine iterative Bewertung der Konstruktionsentscheidungen anhand von Technologieketten ermöglicht. Hiermit können die Potenziale der additiven Fertigungstechnologien zielgerichtet realisiert werden."}],"date_created":"2021-06-15T11:10:09Z","type":"journal_article","department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"year":"2018","title":"Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung","status":"public","author":[{"full_name":"Jacob, Alexander","first_name":"Alexander","last_name":"Jacob"},{"last_name":"Künneke","first_name":"Thomas","full_name":"Künneke, Thomas","id":"13226"},{"last_name":"Lieneke","first_name":"Tobias","full_name":"Lieneke, Tobias","id":"13956"},{"last_name":"Baumann","first_name":"Tobias","full_name":"Baumann, Tobias"},{"full_name":"Stricker, Nicole","first_name":"Nicole","last_name":"Stricker"},{"full_name":"Zimmer, Detmar","first_name":"Detmar","last_name":"Zimmer","id":"604"},{"first_name":"Gisela","last_name":"Lanza","full_name":"Lanza, Gisela"}],"date_updated":"2022-01-06T06:55:33Z","intvolume":"       113","page":"742-745","_id":"22436","language":[{"iso":"eng"}],"publisher":"Carl Hanser Verlag","user_id":"38077","doi":"https://doi.org/10.3139/104.112005","volume":113},{"publication_status":"published","date_updated":"2022-01-06T06:55:33Z","publication_identifier":{"issn":["1617-7061"]},"author":[{"full_name":"Boettcher, Konrad","last_name":"Boettcher","first_name":"Konrad"},{"id":"72973","first_name":"Mike","last_name":"Bothe","full_name":"Bothe, Mike"}],"year":"2018","status":"public","title":"Thin liquid droplet on top of a rotating non-isothermal liquid layer","user_id":"14931","doi":"10.1002/pamm.201710295","_id":"22456","language":[{"iso":"eng"}],"page":"653-654","citation":{"short":"K. Boettcher, M. Bothe, PAMM (2018) 653–654.","chicago":"Boettcher, Konrad, and Mike Bothe. “Thin Liquid Droplet on Top of a Rotating Non-Isothermal Liquid Layer.” <i>PAMM</i>, 2018, 653–54. <a href=\"https://doi.org/10.1002/pamm.201710295\">https://doi.org/10.1002/pamm.201710295</a>.","ieee":"K. Boettcher and M. Bothe, “Thin liquid droplet on top of a rotating non-isothermal liquid layer,” <i>PAMM</i>, pp. 653–654, 2018.","apa":"Boettcher, K., &#38; Bothe, M. (2018). Thin liquid droplet on top of a rotating non-isothermal liquid layer. <i>PAMM</i>, 653–654. <a href=\"https://doi.org/10.1002/pamm.201710295\">https://doi.org/10.1002/pamm.201710295</a>","bibtex":"@article{Boettcher_Bothe_2018, title={Thin liquid droplet on top of a rotating non-isothermal liquid layer}, DOI={<a href=\"https://doi.org/10.1002/pamm.201710295\">10.1002/pamm.201710295</a>}, journal={PAMM}, author={Boettcher, Konrad and Bothe, Mike}, year={2018}, pages={653–654} }","ama":"Boettcher K, Bothe M. Thin liquid droplet on top of a rotating non-isothermal liquid layer. <i>PAMM</i>. 2018:653-654. doi:<a href=\"https://doi.org/10.1002/pamm.201710295\">10.1002/pamm.201710295</a>","mla":"Boettcher, Konrad, and Mike Bothe. “Thin Liquid Droplet on Top of a Rotating Non-Isothermal Liquid Layer.” <i>PAMM</i>, 2018, pp. 653–54, doi:<a href=\"https://doi.org/10.1002/pamm.201710295\">10.1002/pamm.201710295</a>."},"publication":"PAMM","department":[{"_id":"9"},{"_id":"145"}],"type":"journal_article","date_created":"2021-06-17T06:53:03Z"},{"year":"2018","title":"Entwurf und simulationsgestützte Analyse eines mechanisch rekonfigurierbaren Mehrmotorengetriebes","status":"public","author":[{"full_name":"Brückner, Uwe","first_name":"Uwe","last_name":"Brückner"}],"publication_identifier":{"isbn":["978-3-8440-6362-2"]},"date_updated":"2022-01-06T06:55:35Z","_id":"22502","publisher":"Shaker Verlag GmbH ","language":[{"iso":"eng"}],"doi":"10.2370/9783844063622","user_id":"38077","citation":{"mla":"Brückner, Uwe. <i>Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren Mehrmotorengetriebes</i>. Shaker Verlag GmbH , 2018, doi:<a href=\"https://doi.org/10.2370/9783844063622\">10.2370/9783844063622</a>.","ama":"Brückner U. <i>Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren Mehrmotorengetriebes</i>. Shaker Verlag GmbH ; 2018. doi:<a href=\"https://doi.org/10.2370/9783844063622\">10.2370/9783844063622</a>","bibtex":"@book{Brückner_2018, title={Entwurf und simulationsgestützte Analyse eines mechanisch rekonfigurierbaren Mehrmotorengetriebes}, DOI={<a href=\"https://doi.org/10.2370/9783844063622\">10.2370/9783844063622</a>}, publisher={Shaker Verlag GmbH }, author={Brückner, Uwe}, year={2018} }","apa":"Brückner, U. (2018). <i>Entwurf und simulationsgestützte Analyse eines mechanisch rekonfigurierbaren Mehrmotorengetriebes</i>. Shaker Verlag GmbH . <a href=\"https://doi.org/10.2370/9783844063622\">https://doi.org/10.2370/9783844063622</a>","ieee":"U. Brückner, <i>Entwurf und simulationsgestützte Analyse eines mechanisch rekonfigurierbaren Mehrmotorengetriebes</i>. Shaker Verlag GmbH , 2018.","short":"U. Brückner, Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren Mehrmotorengetriebes, Shaker Verlag GmbH , 2018.","chicago":"Brückner, Uwe. <i>Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren Mehrmotorengetriebes</i>. Shaker Verlag GmbH , 2018. <a href=\"https://doi.org/10.2370/9783844063622\">https://doi.org/10.2370/9783844063622</a>."},"date_created":"2021-06-21T13:34:18Z","type":"dissertation","department":[{"_id":"9"},{"_id":"146"}]},{"user_id":"38077","doi":"10.2370/9783844058789","_id":"22503","publisher":"Shaker Verlag GmbH ","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:55:35Z","author":[{"full_name":"Strop, Malte","first_name":"Malte","last_name":"Strop"}],"publication_identifier":{"isbn":["978-3-8440-5878-9"]},"status":"public","year":"2018","title":"Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme und ihre Anwendung auf Kautschukinnenmischer","department":[{"_id":"9"},{"_id":"146"}],"type":"dissertation","date_created":"2021-06-21T13:34:20Z","citation":{"chicago":"Strop, Malte. <i>Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme Und Ihre Anwendung Auf Kautschukinnenmischer</i>. Shaker Verlag GmbH , 2018. <a href=\"https://doi.org/10.2370/9783844058789\">https://doi.org/10.2370/9783844058789</a>.","short":"M. Strop, Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme Und Ihre Anwendung Auf Kautschukinnenmischer, Shaker Verlag GmbH , 2018.","apa":"Strop, M. (2018). <i>Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme und ihre Anwendung auf Kautschukinnenmischer</i>. Shaker Verlag GmbH . <a href=\"https://doi.org/10.2370/9783844058789\">https://doi.org/10.2370/9783844058789</a>","ieee":"M. Strop, <i>Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme und ihre Anwendung auf Kautschukinnenmischer</i>. Shaker Verlag GmbH , 2018.","ama":"Strop M. <i>Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme Und Ihre Anwendung Auf Kautschukinnenmischer</i>. Shaker Verlag GmbH ; 2018. doi:<a href=\"https://doi.org/10.2370/9783844058789\">10.2370/9783844058789</a>","bibtex":"@book{Strop_2018, title={Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme und ihre Anwendung auf Kautschukinnenmischer}, DOI={<a href=\"https://doi.org/10.2370/9783844058789\">10.2370/9783844058789</a>}, publisher={Shaker Verlag GmbH }, author={Strop, Malte}, year={2018} }","mla":"Strop, Malte. <i>Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme Und Ihre Anwendung Auf Kautschukinnenmischer</i>. Shaker Verlag GmbH , 2018, doi:<a href=\"https://doi.org/10.2370/9783844058789\">10.2370/9783844058789</a>."}},{"department":[{"_id":"9"},{"_id":"146"},{"_id":"219"},{"_id":"624"}],"type":"book","date_created":"2021-06-22T13:31:43Z","citation":{"chicago":"Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and Detmar Zimmer. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018. <a href=\"https://doi.org/10.3139/9783446456198.009\">https://doi.org/10.3139/9783446456198.009</a>.","short":"U. Brückner, T. Künneke, M.H. Schadomsky, M. Strop, D. Zimmer, Elektromechanische Antriebe, Carl Hanser Verlag, 2018.","apa":"Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., &#38; Zimmer, D. (2018). <i>Elektromechanische Antriebe</i> (pp. 247–290). Carl Hanser Verlag. <a href=\"https://doi.org/10.3139/9783446456198.009\">https://doi.org/10.3139/9783446456198.009</a>","ieee":"U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018, pp. 247–290.","ama":"Brückner U, Künneke T, Schadomsky MH, Strop M, Zimmer D. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag; 2018:247-290. doi:<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>","bibtex":"@book{Brückner_Künneke_Schadomsky_Strop_Zimmer_2018, title={Elektromechanische Antriebe}, DOI={<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>}, publisher={Carl Hanser Verlag}, author={Brückner, Uwe and Künneke, Thomas and Schadomsky, Magnus Hubert and Strop, Malte and Zimmer, Detmar}, year={2018}, pages={247–290} }","mla":"Brückner, Uwe, et al. <i>Elektromechanische Antriebe</i>. Carl Hanser Verlag, 2018, pp. 247–90, doi:<a href=\"https://doi.org/10.3139/9783446456198.009\">10.3139/9783446456198.009</a>."},"user_id":"38077","doi":"10.3139/9783446456198.009","language":[{"iso":"eng"}],"_id":"22506","publisher":"Carl Hanser Verlag","page":"247-290","date_updated":"2022-01-06T06:55:35Z","author":[{"last_name":"Brückner","first_name":"Uwe","full_name":"Brückner, Uwe"},{"full_name":"Künneke, Thomas","first_name":"Thomas","last_name":"Künneke","id":"13226"},{"id":"11904","full_name":"Schadomsky, Magnus Hubert","first_name":"Magnus Hubert","last_name":"Schadomsky"},{"last_name":"Strop","first_name":"Malte","full_name":"Strop, Malte"},{"id":"604","full_name":"Zimmer, Detmar","last_name":"Zimmer","first_name":"Detmar"}],"publication_identifier":{"isbn":["978-3-446-45619-8"]},"title":"Elektromechanische Antriebe","year":"2018","status":"public"},{"publication":"Steigerung der Intelligenz mechatronischer Systeme","citation":{"mla":"Lüke, Christopher, et al. “Intelligente Steuerungen Und Regelungen.” <i>Steigerung Der Intelligenz Mechatronischer Systeme</i>, vol. 1, Springer Vieweg, 2018, pp. 153–92.","ama":"Lüke C, Timmermann J, Kessler JH, Trächtler A. Intelligente Steuerungen und Regelungen. In: <i>Steigerung Der Intelligenz Mechatronischer Systeme</i>. Vol 1. Springer Vieweg; 2018:153-192.","bibtex":"@inbook{Lüke_Timmermann_Kessler_Trächtler_2018, title={Intelligente Steuerungen und Regelungen}, volume={1}, booktitle={Steigerung der Intelligenz mechatronischer Systeme}, publisher={Springer Vieweg}, author={Lüke, Christopher and Timmermann, Julia and Kessler, Jan Henning and Trächtler, Ansgar}, year={2018}, pages={153–192} }","apa":"Lüke, C., Timmermann, J., Kessler, J. H., &#38; Trächtler, A. (2018). Intelligente Steuerungen und Regelungen. In <i>Steigerung der Intelligenz mechatronischer Systeme</i> (Vol. 1, pp. 153–192). Springer Vieweg.","ieee":"C. Lüke, J. Timmermann, J. H. Kessler, and A. Trächtler, “Intelligente Steuerungen und Regelungen,” in <i>Steigerung der Intelligenz mechatronischer Systeme</i>, vol. 1, Springer Vieweg, 2018, pp. 153–192.","chicago":"Lüke, Christopher, Julia Timmermann, Jan Henning Kessler, and Ansgar Trächtler. “Intelligente Steuerungen Und Regelungen.” In <i>Steigerung Der Intelligenz Mechatronischer Systeme</i>, 1:153–92. Springer Vieweg, 2018.","short":"C. Lüke, J. Timmermann, J.H. Kessler, A. Trächtler, in: Steigerung Der Intelligenz Mechatronischer Systeme, Springer Vieweg, 2018, pp. 153–192."},"type":"book_chapter","department":[{"_id":"153"}],"date_created":"2021-08-09T05:39:28Z","date_updated":"2022-01-06T06:55:44Z","intvolume":"         1","title":"Intelligente Steuerungen und Regelungen","year":"2018","status":"public","author":[{"last_name":"Lüke","first_name":"Christopher","full_name":"Lüke, Christopher","id":"22675"},{"id":"15402","full_name":"Timmermann, Julia","first_name":"Julia","last_name":"Timmermann"},{"last_name":"Kessler","first_name":"Jan Henning","full_name":"Kessler, Jan Henning"},{"id":"552","full_name":"Trächtler, Ansgar","first_name":"Ansgar","last_name":"Trächtler"}],"user_id":"24876","volume":1,"page":"153-192","publisher":"Springer Vieweg","_id":"22984","language":[{"iso":"eng"}]},{"series_title":"Springer Verlag","_id":"22985","publisher":"Springer","language":[{"iso":"eng"}],"user_id":"24876","title":"Ressourceneffiziente Selbstoptimierende Wäscherei","status":"public","year":"2018","author":[{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552"}],"date_updated":"2022-01-06T06:55:44Z","date_created":"2021-08-09T05:39:29Z","place":"https://doi.org/10.1007/978-3-662-56390-8","type":"book","department":[{"_id":"153"}],"citation":{"bibtex":"@book{Trächtler_2018, place={https://doi.org/10.1007/978-3-662-56390-8}, series={Springer Verlag}, title={Ressourceneffiziente Selbstoptimierende Wäscherei}, publisher={Springer}, author={Trächtler, Ansgar}, year={2018}, collection={Springer Verlag} }","ama":"Trächtler A. <i>Ressourceneffiziente Selbstoptimierende Wäscherei</i>. https://doi.org/10.1007/978-3-662-56390-8: Springer; 2018.","mla":"Trächtler, Ansgar. <i>Ressourceneffiziente Selbstoptimierende Wäscherei</i>. Springer, 2018.","short":"A. Trächtler, Ressourceneffiziente Selbstoptimierende Wäscherei, Springer, https://doi.org/10.1007/978-3-662-56390-8, 2018.","chicago":"Trächtler, Ansgar. <i>Ressourceneffiziente Selbstoptimierende Wäscherei</i>. Springer Verlag. https://doi.org/10.1007/978-3-662-56390-8: Springer, 2018.","ieee":"A. Trächtler, <i>Ressourceneffiziente Selbstoptimierende Wäscherei</i>. https://doi.org/10.1007/978-3-662-56390-8: Springer, 2018.","apa":"Trächtler, A. (2018). <i>Ressourceneffiziente Selbstoptimierende Wäscherei</i>. https://doi.org/10.1007/978-3-662-56390-8: Springer."}},{"language":[{"iso":"eng"}],"_id":"22986","publisher":"IARIA","user_id":"14931","title":"Shader-Based Realtime Simulation of High-Definition Automotive Headlamps","year":"2018","status":"public","author":[{"last_name":"Rüddenklau","first_name":"Nico","full_name":"Rüddenklau, Nico","id":"22359"},{"first_name":"Patrick","last_name":"Biemelt","full_name":"Biemelt, Patrick","id":"24876"},{"full_name":"Henning, Sven","first_name":"Sven","last_name":"Henning","id":"13195"},{"id":"17793","last_name":"Gausemeier","first_name":"Sandra","full_name":"Gausemeier, Sandra"},{"id":"552","full_name":"Trächtler, Ansgar","first_name":"Ansgar","last_name":"Trächtler"}],"date_updated":"2022-01-06T06:55:44Z","date_created":"2021-08-09T05:39:30Z","type":"conference","department":[{"_id":"153"}],"publication":"SIMUL 2018, The Tenth International Conference on Advances in System Simulation","citation":{"bibtex":"@inproceedings{Rüddenklau_Biemelt_Henning_Gausemeier_Trächtler_2018, title={Shader-Based Realtime Simulation of High-Definition Automotive Headlamps}, booktitle={SIMUL 2018, The Tenth International Conference on Advances in System Simulation}, publisher={IARIA}, author={Rüddenklau, Nico and Biemelt, Patrick and Henning, Sven and Gausemeier, Sandra and Trächtler, Ansgar}, year={2018} }","ama":"Rüddenklau N, Biemelt P, Henning S, Gausemeier S, Trächtler A. Shader-Based Realtime Simulation of High-Definition Automotive Headlamps. In: <i>SIMUL 2018, The Tenth International Conference on Advances in System Simulation</i>. IARIA; 2018.","mla":"Rüddenklau, Nico, et al. “Shader-Based Realtime Simulation of High-Definition Automotive Headlamps.” <i>SIMUL 2018, The Tenth International Conference on Advances in System Simulation</i>, IARIA, 2018.","short":"N. Rüddenklau, P. Biemelt, S. Henning, S. Gausemeier, A. Trächtler, in: SIMUL 2018, The Tenth International Conference on Advances in System Simulation, IARIA, 2018.","chicago":"Rüddenklau, Nico, Patrick Biemelt, Sven Henning, Sandra Gausemeier, and Ansgar Trächtler. “Shader-Based Realtime Simulation of High-Definition Automotive Headlamps.” In <i>SIMUL 2018, The Tenth International Conference on Advances in System Simulation</i>. IARIA, 2018.","ieee":"N. Rüddenklau, P. Biemelt, S. Henning, S. Gausemeier, and A. Trächtler, “Shader-Based Realtime Simulation of High-Definition Automotive Headlamps,” in <i>SIMUL 2018, The Tenth International Conference on Advances in System Simulation</i>, 2018.","apa":"Rüddenklau, N., Biemelt, P., Henning, S., Gausemeier, S., &#38; Trächtler, A. (2018). Shader-Based Realtime Simulation of High-Definition Automotive Headlamps. In <i>SIMUL 2018, The Tenth International Conference on Advances in System Simulation</i>. IARIA."}},{"author":[{"full_name":"Drüke, Simon","first_name":"Simon","last_name":"Drüke"},{"full_name":"Bicker, Rainer","first_name":"Rainer","last_name":"Bicker"},{"first_name":"Bernd","last_name":"Schullter","full_name":"Schullter, Bernd"},{"full_name":"Henke, Christian","first_name":"Christian","last_name":"Henke"},{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552"}],"title":"Rotordynamic instabilities in washing machines","status":"public","year":"2018","date_updated":"2022-01-06T06:55:44Z","_id":"22987","publisher":"Springer Nature Switzerland AG","language":[{"iso":"eng"}],"page":"383-397","user_id":"24876","citation":{"apa":"Drüke, S., Bicker, R., Schullter, B., Henke, C., &#38; Trächtler, A. (2018). Rotordynamic instabilities in washing machines. In <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i> (pp. 383–397). Springer Nature Switzerland AG.","mla":"Drüke, Simon, et al. “Rotordynamic Instabilities in Washing Machines.” <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>, Springer Nature Switzerland AG, 2018, pp. 383–97.","ieee":"S. Drüke, R. Bicker, B. Schullter, C. Henke, and A. Trächtler, “Rotordynamic instabilities in washing machines,” in <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>, 2018, pp. 383–397.","chicago":"Drüke, Simon, Rainer Bicker, Bernd Schullter, Christian Henke, and Ansgar Trächtler. “Rotordynamic Instabilities in Washing Machines.” In <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>, 383–97. Springer Nature Switzerland AG, 2018.","short":"S. Drüke, R. Bicker, B. Schullter, C. Henke, A. Trächtler, in: Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM, Springer Nature Switzerland AG, 2018, pp. 383–397.","ama":"Drüke S, Bicker R, Schullter B, Henke C, Trächtler A. Rotordynamic instabilities in washing machines. In: <i>Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM</i>. Springer Nature Switzerland AG; 2018:383-397.","bibtex":"@inproceedings{Drüke_Bicker_Schullter_Henke_Trächtler_2018, title={Rotordynamic instabilities in washing machines}, booktitle={Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM}, publisher={Springer Nature Switzerland AG}, author={Drüke, Simon and Bicker, Rainer and Schullter, Bernd and Henke, Christian and Trächtler, Ansgar}, year={2018}, pages={383–397} }"},"publication":"Proceedings of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM","date_created":"2021-08-09T05:39:54Z","department":[{"_id":"153"},{"_id":"241"}],"type":"conference"},{"author":[{"last_name":"Gräler","first_name":"Manuel","full_name":"Gräler, Manuel"},{"last_name":"Springer","first_name":"Robert","full_name":"Springer, Robert"},{"full_name":"Henke, Christian","first_name":"Christian","last_name":"Henke"},{"id":"552","full_name":"Trächtler, Ansgar","last_name":"Trächtler","first_name":"Ansgar"},{"full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"}],"title":"Assisted setup of forming processes: compensation of initial stochastic disturbances","status":"public","year":"2018","intvolume":"        25","date_updated":"2022-01-06T06:55:44Z","language":[{"iso":"eng"}],"_id":"22988","page":"358-364","volume":25,"user_id":"24876","citation":{"bibtex":"@article{Gräler_Springer_Henke_Trächtler_Homberg_2018, title={Assisted setup of forming processes: compensation of initial stochastic disturbances}, volume={25}, journal={Swedish Production Symposium}, author={Gräler, Manuel and Springer, Robert and Henke, Christian and Trächtler, Ansgar and Homberg, Werner}, year={2018}, pages={358–364} }","chicago":"Gräler, Manuel, Robert Springer, Christian Henke, Ansgar Trächtler, and Werner Homberg. “Assisted Setup of Forming Processes: Compensation of Initial Stochastic Disturbances.” <i>Swedish Production Symposium</i> 25 (2018): 358–64.","ama":"Gräler M, Springer R, Henke C, Trächtler A, Homberg W. Assisted setup of forming processes: compensation of initial stochastic disturbances. <i>Swedish Production Symposium</i>. 2018;25:358-364.","short":"M. Gräler, R. Springer, C. Henke, A. Trächtler, W. Homberg, Swedish Production Symposium 25 (2018) 358–364.","ieee":"M. Gräler, R. Springer, C. Henke, A. Trächtler, and W. Homberg, “Assisted setup of forming processes: compensation of initial stochastic disturbances,” <i>Swedish Production Symposium</i>, vol. 25, pp. 358–364, 2018.","mla":"Gräler, Manuel, et al. “Assisted Setup of Forming Processes: Compensation of Initial Stochastic Disturbances.” <i>Swedish Production Symposium</i>, vol. 25, 2018, pp. 358–64.","apa":"Gräler, M., Springer, R., Henke, C., Trächtler, A., &#38; Homberg, W. (2018). Assisted setup of forming processes: compensation of initial stochastic disturbances. <i>Swedish Production Symposium</i>, <i>25</i>, 358–364."},"publication":"Swedish Production Symposium","date_created":"2021-08-09T05:39:55Z","department":[{"_id":"153"},{"_id":"241"}],"type":"journal_article"},{"citation":{"ama":"Rüting AT, Henke C, Trächtler A. Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung. In: <i>EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen</i>. IFAK - Institut für Automation und Kommunikation e.V.; 2018.","short":"A.T. Rüting, C. Henke, A. Trächtler, in: EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen, IFAK - Institut für Automation und Kommunikation e.V., 2018.","chicago":"Rüting, Arne Thorsten, Christian Henke, and Ansgar Trächtler. “Umsetzung Einer Echtzeitfähigen Mehrgrößenoptimierung Auf Einer Industriesteuerung.” In <i>EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen</i>. IFAK - Institut für Automation und Kommunikation e.V., 2018.","bibtex":"@inproceedings{Rüting_Henke_Trächtler_2018, title={Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung}, booktitle={EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen}, publisher={IFAK - Institut für Automation und Kommunikation e.V.}, author={Rüting, Arne Thorsten and Henke, Christian and Trächtler, Ansgar}, year={2018} }","mla":"Rüting, Arne Thorsten, et al. “Umsetzung Einer Echtzeitfähigen Mehrgrößenoptimierung Auf Einer Industriesteuerung.” <i>EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen</i>, IFAK - Institut für Automation und Kommunikation e.V., 2018.","apa":"Rüting, A. T., Henke, C., &#38; Trächtler, A. (2018). Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung. In <i>EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen</i>. IFAK - Institut für Automation und Kommunikation e.V.","ieee":"A. T. Rüting, C. Henke, and A. Trächtler, “Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung,” in <i>EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen</i>, 2018."},"publication":"EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen","department":[{"_id":"153"},{"_id":"241"}],"type":"conference","date_created":"2021-08-09T05:39:57Z","date_updated":"2022-01-06T06:55:44Z","author":[{"last_name":"Rüting","first_name":"Arne Thorsten","full_name":"Rüting, Arne Thorsten"},{"full_name":"Henke, Christian","first_name":"Christian","last_name":"Henke"},{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552"}],"status":"public","year":"2018","title":"Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung","user_id":"24876","language":[{"iso":"eng"}],"_id":"22989","publisher":"IFAK - Institut für Automation und Kommunikation e.V."},{"title":"Model based Setup Assistant for Progressive Tools","status":"public","year":"2018","author":[{"last_name":"Springer","first_name":"Robert","full_name":"Springer, Robert"},{"last_name":"Graeler","first_name":"Manuel","full_name":"Graeler, Manuel"},{"full_name":"Homberg, Werner","last_name":"Homberg","first_name":"Werner"},{"last_name":"Henke","first_name":"Christian","full_name":"Henke, Christian"},{"id":"552","first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar"}],"date_updated":"2022-01-06T06:55:44Z","intvolume":"    160025","language":[{"iso":"eng"}],"_id":"22990","user_id":"24876","volume":160025,"publication":"AIP Conference Proceedings","issue":"2018","citation":{"short":"R. Springer, M. Graeler, W. Homberg, C. Henke, A. Trächtler, AIP Conference Proceedings 160025 (2018).","chicago":"Springer, Robert, Manuel Graeler, Werner Homberg, Christian Henke, and Ansgar Trächtler. “Model Based Setup Assistant for Progressive Tools.” <i>AIP Conference Proceedings</i> 160025, no. 2018 (2018).","ieee":"R. Springer, M. Graeler, W. Homberg, C. Henke, and A. Trächtler, “Model based Setup Assistant for Progressive Tools,” <i>AIP Conference Proceedings</i>, vol. 160025, no. 2018, 2018.","apa":"Springer, R., Graeler, M., Homberg, W., Henke, C., &#38; Trächtler, A. (2018). Model based Setup Assistant for Progressive Tools. <i>AIP Conference Proceedings</i>, <i>160025</i>(2018).","bibtex":"@article{Springer_Graeler_Homberg_Henke_Trächtler_2018, title={Model based Setup Assistant for Progressive Tools}, volume={160025}, number={2018}, journal={AIP Conference Proceedings}, author={Springer, Robert and Graeler, Manuel and Homberg, Werner and Henke, Christian and Trächtler, Ansgar}, year={2018} }","ama":"Springer R, Graeler M, Homberg W, Henke C, Trächtler A. Model based Setup Assistant for Progressive Tools. <i>AIP Conference Proceedings</i>. 2018;160025(2018).","mla":"Springer, Robert, et al. “Model Based Setup Assistant for Progressive Tools.” <i>AIP Conference Proceedings</i>, vol. 160025, no. 2018, 2018."},"date_created":"2021-08-09T05:39:58Z","type":"journal_article","department":[{"_id":"153"},{"_id":"241"}]},{"citation":{"ieee":"S. Henning, P. Biemelt, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management System including an Intelligent External Traffic Simulation,” in <i>Proceedings of the DSC 2018 Europe VR: New trends in Human in the Loop simulation and testing. Driving simulation and VR</i>, 2018, pp. 91–98.","apa":"Henning, S., Biemelt, P., Rüddenklau, N., Gausemeier, S., &#38; Trächtler, A. (2018). A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management System including an Intelligent External Traffic Simulation. In <i>Proceedings of the DSC 2018 Europe VR: New trends in Human in the Loop simulation and testing. Driving simulation and VR</i> (pp. 91–98). Driving Simulation Association.","short":"S. Henning, P. Biemelt, N. Rüddenklau, S. Gausemeier, A. Trächtler, in: Proceedings of the DSC 2018 Europe VR: New Trends in Human in the Loop Simulation and Testing. Driving Simulation and VR, Driving Simulation Association, 2018, pp. 91–98.","chicago":"Henning, Sven, Patrick Biemelt, Nico Rüddenklau, Sandra Gausemeier, and Ansgar Trächtler. “A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management System Including an Intelligent External Traffic Simulation.” In <i>Proceedings of the DSC 2018 Europe VR: New Trends in Human in the Loop Simulation and Testing. Driving Simulation and VR</i>, 91–98. Driving Simulation Association, 2018.","mla":"Henning, Sven, et al. “A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management System Including an Intelligent External Traffic Simulation.” <i>Proceedings of the DSC 2018 Europe VR: New Trends in Human in the Loop Simulation and Testing. Driving Simulation and VR</i>, Driving Simulation Association, 2018, pp. 91–98.","bibtex":"@inproceedings{Henning_Biemelt_Rüddenklau_Gausemeier_Trächtler_2018, title={A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management System including an Intelligent External Traffic Simulation}, booktitle={Proceedings of the DSC 2018 Europe VR: New trends in Human in the Loop simulation and testing. Driving simulation and VR}, publisher={Driving Simulation Association}, author={Henning, Sven and Biemelt, Patrick and Rüddenklau, Nico and Gausemeier, Sandra and Trächtler, Ansgar}, year={2018}, pages={91–98} }","ama":"Henning S, Biemelt P, Rüddenklau N, Gausemeier S, Trächtler A. A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management System including an Intelligent External Traffic Simulation. In: <i>Proceedings of the DSC 2018 Europe VR: New Trends in Human in the Loop Simulation and Testing. Driving Simulation and VR</i>. Driving Simulation Association; 2018:91-98."},"publication":"Proceedings of the DSC 2018 Europe VR: New trends in Human in the Loop simulation and testing. Driving simulation and VR","date_created":"2021-08-09T05:40:21Z","department":[{"_id":"153"}],"type":"conference","author":[{"full_name":"Henning, Sven","last_name":"Henning","first_name":"Sven","id":"13195"},{"id":"24876","last_name":"Biemelt","first_name":"Patrick","full_name":"Biemelt, Patrick"},{"id":"22359","last_name":"Rüddenklau","first_name":"Nico","full_name":"Rüddenklau, Nico"},{"id":"17793","first_name":"Sandra","last_name":"Gausemeier","full_name":"Gausemeier, Sandra"},{"id":"552","full_name":"Trächtler, Ansgar","first_name":"Ansgar","last_name":"Trächtler"}],"year":"2018","title":"A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management System including an Intelligent External Traffic Simulation","status":"public","date_updated":"2022-01-06T06:55:44Z","publisher":"Driving Simulation Association","_id":"22992","language":[{"iso":"eng"}],"page":"91-98","user_id":"14931"},{"user_id":"24876","page":"4-7","_id":"22994","publisher":"IEEE","language":[{"iso":"eng"}],"date_updated":"2022-01-06T06:55:44Z","status":"public","title":"Holistic Requirements for Interdisciplinary Development Processes","year":"2018","author":[{"full_name":"Lankeit, Christopher","first_name":"Christopher","last_name":"Lankeit"},{"last_name":"Michael","first_name":"Jan","full_name":"Michael, Jan"},{"last_name":"Henke","first_name":"Christian","full_name":"Henke, Christian"},{"id":"552","last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar"}],"type":"conference","department":[{"_id":"153"},{"_id":"241"}],"date_created":"2021-08-09T05:40:24Z","publication":"Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering","citation":{"ieee":"C. Lankeit, J. Michael, C. Henke, and A. Trächtler, “Holistic Requirements for Interdisciplinary Development Processes,” in <i>Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering</i>, 2018, pp. 4–7.","apa":"Lankeit, C., Michael, J., Henke, C., &#38; Trächtler, A. (2018). Holistic Requirements for Interdisciplinary Development Processes. In <i>Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering</i> (pp. 4–7). IEEE.","chicago":"Lankeit, Christopher, Jan Michael, Christian Henke, and Ansgar Trächtler. “Holistic Requirements for Interdisciplinary Development Processes.” In <i>Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering</i>, 4–7. IEEE, 2018.","short":"C. Lankeit, J. Michael, C. Henke, A. Trächtler, in: Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering, IEEE, 2018, pp. 4–7.","mla":"Lankeit, Christopher, et al. “Holistic Requirements for Interdisciplinary Development Processes.” <i>Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering</i>, IEEE, 2018, pp. 4–7.","bibtex":"@inproceedings{Lankeit_Michael_Henke_Trächtler_2018, title={Holistic Requirements for Interdisciplinary Development Processes}, booktitle={Proceedings 1st International Workshop on Learning from other Disciplines for Requirements Engineering}, publisher={IEEE}, author={Lankeit, Christopher and Michael, Jan and Henke, Christian and Trächtler, Ansgar}, year={2018}, pages={4–7} }","ama":"Lankeit C, Michael J, Henke C, Trächtler A. Holistic Requirements for Interdisciplinary Development Processes. In: <i>Proceedings 1st International Workshop on Learning from Other Disciplines for Requirements Engineering</i>. IEEE; 2018:4-7."}},{"intvolume":"        50","date_updated":"2022-01-06T06:55:44Z","author":[{"full_name":"Pai, Arathi","first_name":"Arathi","last_name":"Pai"},{"full_name":"Riepold, Markus","last_name":"Riepold","first_name":"Markus"},{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552"}],"title":"Model-based precision position and force control of SMA actuators with a clamping application","status":"public","year":"2018","volume":50,"user_id":"24876","language":[{"iso":"eng"}],"_id":"22995","page":"303-320","citation":{"short":"A. Pai, M. Riepold, A. Trächtler, Mechatronics 50 (2018) 303–320.","chicago":"Pai, Arathi, Markus Riepold, and Ansgar Trächtler. “Model-Based Precision Position and Force Control of SMA Actuators with a Clamping Application.” <i>Mechatronics</i> 50 (2018): 303–20.","apa":"Pai, A., Riepold, M., &#38; Trächtler, A. (2018). Model-based precision position and force control of SMA actuators with a clamping application. <i>Mechatronics</i>, <i>50</i>, 303–320.","ieee":"A. Pai, M. Riepold, and A. Trächtler, “Model-based precision position and force control of SMA actuators with a clamping application,” <i>Mechatronics</i>, vol. 50, pp. 303–320, 2018.","ama":"Pai A, Riepold M, Trächtler A. Model-based precision position and force control of SMA actuators with a clamping application. <i>Mechatronics</i>. 2018;50:303-320.","bibtex":"@article{Pai_Riepold_Trächtler_2018, title={Model-based precision position and force control of SMA actuators with a clamping application}, volume={50}, journal={Mechatronics}, author={Pai, Arathi and Riepold, Markus and Trächtler, Ansgar}, year={2018}, pages={303–320} }","mla":"Pai, Arathi, et al. “Model-Based Precision Position and Force Control of SMA Actuators with a Clamping Application.” <i>Mechatronics</i>, vol. 50, 2018, pp. 303–20."},"publication":"Mechatronics","department":[{"_id":"153"},{"_id":"241"}],"type":"journal_article","date_created":"2021-08-09T05:41:37Z"},{"intvolume":"        50","date_updated":"2022-01-06T06:55:44Z","author":[{"full_name":"Olma, Simon","first_name":"Simon","last_name":"Olma"},{"last_name":"Kohlstedt","first_name":"Andreas","full_name":"Kohlstedt, Andreas"},{"id":"27484","last_name":"Traphöner","first_name":"Phillip","full_name":"Traphöner, Phillip"},{"first_name":"Karl-Peter","last_name":"Jäker","full_name":"Jäker, Karl-Peter"},{"id":"552","last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar"}],"title":"Observer-based nonlinear control strategies for Hardware-in-the-Loop simulations of multiaxial suspension test rigs","year":"2018","status":"public","volume":50,"user_id":"24876","_id":"22997","language":[{"iso":"eng"}],"page":"212-224","citation":{"bibtex":"@article{Olma_Kohlstedt_Traphöner_Jäker_Trächtler_2018, title={Observer-based nonlinear control strategies for Hardware-in-the-Loop simulations of multiaxial suspension test rigs}, volume={50}, journal={Mechatronics}, author={Olma, Simon and Kohlstedt, Andreas and Traphöner, Phillip and Jäker, Karl-Peter and Trächtler, Ansgar}, year={2018}, pages={212–224} }","ama":"Olma S, Kohlstedt A, Traphöner P, Jäker K-P, Trächtler A. Observer-based nonlinear control strategies for Hardware-in-the-Loop simulations of multiaxial suspension test rigs. <i>Mechatronics</i>. 2018;50:212-224.","mla":"Olma, Simon, et al. “Observer-Based Nonlinear Control Strategies for Hardware-in-the-Loop Simulations of Multiaxial Suspension Test Rigs.” <i>Mechatronics</i>, vol. 50, 2018, pp. 212–24.","chicago":"Olma, Simon, Andreas Kohlstedt, Phillip Traphöner, Karl-Peter Jäker, and Ansgar Trächtler. “Observer-Based Nonlinear Control Strategies for Hardware-in-the-Loop Simulations of Multiaxial Suspension Test Rigs.” <i>Mechatronics</i> 50 (2018): 212–24.","short":"S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, A. Trächtler, Mechatronics 50 (2018) 212–224.","ieee":"S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, and A. Trächtler, “Observer-based nonlinear control strategies for Hardware-in-the-Loop simulations of multiaxial suspension test rigs,” <i>Mechatronics</i>, vol. 50, pp. 212–224, 2018.","apa":"Olma, S., Kohlstedt, A., Traphöner, P., Jäker, K.-P., &#38; Trächtler, A. (2018). Observer-based nonlinear control strategies for Hardware-in-the-Loop simulations of multiaxial suspension test rigs. <i>Mechatronics</i>, <i>50</i>, 212–224."},"publication":"Mechatronics","department":[{"_id":"153"}],"type":"journal_article","date_created":"2021-08-09T05:41:39Z"},{"date_created":"2021-08-09T05:41:40Z","department":[{"_id":"153"},{"_id":"241"}],"type":"journal_article","citation":{"short":"J. Holtkötter, J. Michael, C. Henke, A. Trächtler, M. Bockholt, A. Möhlenkamp, M. Katter, Procedia Manufacturing 24 (2018) 235–242.","chicago":"Holtkötter, Jens, Jan Michael, Christian Henke, Ansgar Trächtler, Marcos Bockholt, Andreas Möhlenkamp, and Michael Katter. “Rapid-Control-Prototyping as Part of Model-Based Development of Heat Pump Dryers.” <i>Procedia Manufacturing</i> 24 (2018): 235–242.","ieee":"J. Holtkötter <i>et al.</i>, “Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers,” <i>Procedia Manufacturing</i>, vol. 24, pp. 235–242, 2018.","apa":"Holtkötter, J., Michael, J., Henke, C., Trächtler, A., Bockholt, M., Möhlenkamp, A., &#38; Katter, M. (2018). Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers. <i>Procedia Manufacturing</i>, <i>24</i>, 235–242.","bibtex":"@article{Holtkötter_Michael_Henke_Trächtler_Bockholt_Möhlenkamp_Katter_2018, title={Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers}, volume={24}, journal={Procedia Manufacturing}, author={Holtkötter, Jens and Michael, Jan and Henke, Christian and Trächtler, Ansgar and Bockholt, Marcos and Möhlenkamp, Andreas and Katter, Michael}, year={2018}, pages={235–242} }","ama":"Holtkötter J, Michael J, Henke C, et al. Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers. <i>Procedia Manufacturing</i>. 2018;24:235–242.","mla":"Holtkötter, Jens, et al. “Rapid-Control-Prototyping as Part of Model-Based Development of Heat Pump Dryers.” <i>Procedia Manufacturing</i>, vol. 24, 2018, pp. 235–242."},"publication":"Procedia Manufacturing","_id":"22998","language":[{"iso":"eng"}],"page":"235–242","volume":24,"user_id":"24876","author":[{"full_name":"Holtkötter, Jens","last_name":"Holtkötter","first_name":"Jens"},{"full_name":"Michael, Jan","first_name":"Jan","last_name":"Michael"},{"full_name":"Henke, Christian","last_name":"Henke","first_name":"Christian"},{"full_name":"Trächtler, Ansgar","first_name":"Ansgar","last_name":"Trächtler","id":"552"},{"last_name":"Bockholt","first_name":"Marcos","full_name":"Bockholt, Marcos"},{"last_name":"Möhlenkamp","first_name":"Andreas","full_name":"Möhlenkamp, Andreas"},{"full_name":"Katter, Michael","first_name":"Michael","last_name":"Katter"}],"status":"public","title":"Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers","year":"2018","intvolume":"        24","date_updated":"2022-01-06T06:55:44Z"},{"citation":{"bibtex":"@inproceedings{Biemelt_Henning_Rüddenklau_Gausemeier_Trächtler_2018, title={A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid Kinematics}, booktitle={Proceedings of the Driving Simulation Conference Europe VR (DSC)}, author={Biemelt, Patrick and Henning, Sven and Rüddenklau, Nico and Gausemeier, Sandra and Trächtler, Ansgar}, year={2018}, pages={79–85} }","ama":"Biemelt P, Henning S, Rüddenklau N, Gausemeier S, Trächtler A. A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid Kinematics. In: <i>Proceedings of the Driving Simulation Conference Europe VR (DSC)</i>. ; 2018:79-85.","mla":"Biemelt, Patrick, et al. “A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid Kinematics.” <i>Proceedings of the Driving Simulation Conference Europe VR (DSC)</i>, 2018, pp. 79–85.","short":"P. Biemelt, S. Henning, N. Rüddenklau, S. Gausemeier, A. Trächtler, in: Proceedings of the Driving Simulation Conference Europe VR (DSC), 2018, pp. 79–85.","chicago":"Biemelt, Patrick, Sven Henning, Nico Rüddenklau, Sandra Gausemeier, and Ansgar Trächtler. “A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid Kinematics.” In <i>Proceedings of the Driving Simulation Conference Europe VR (DSC)</i>, 79–85, 2018.","ieee":"P. Biemelt, S. Henning, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid Kinematics,” in <i>Proceedings of the Driving Simulation Conference Europe VR (DSC)</i>, Antibes, France, 2018, pp. 79–85.","apa":"Biemelt, P., Henning, S., Rüddenklau, N., Gausemeier, S., &#38; Trächtler, A. (2018). A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid Kinematics. <i>Proceedings of the Driving Simulation Conference Europe VR (DSC)</i>, 79–85."},"publication":"Proceedings of the Driving Simulation Conference Europe VR (DSC)","date_created":"2021-08-09T05:41:43Z","department":[{"_id":"153"}],"type":"conference","author":[{"last_name":"Biemelt","first_name":"Patrick","full_name":"Biemelt, Patrick","id":"24876"},{"id":"13195","full_name":"Henning, Sven","last_name":"Henning","first_name":"Sven"},{"id":"22359","last_name":"Rüddenklau","first_name":"Nico","full_name":"Rüddenklau, Nico"},{"id":"17793","first_name":"Sandra","last_name":"Gausemeier","full_name":"Gausemeier, Sandra"},{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552"}],"conference":{"name":"Driving Simulation Conference Europe VR (DSC)","location":"Antibes, France"},"status":"public","title":"A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid Kinematics","year":"2018","date_updated":"2022-01-06T06:55:45Z","_id":"23000","language":[{"iso":"eng"}],"page":"79-85","user_id":"24876"}]