[{"citation":{"ama":"Gräßler I, Hieb M. Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing. In: <i>Lectures</i>. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany; 2023:253-524. doi:<a href=\"https://doi.org/10.5162/smsi2023/d7.4\">10.5162/smsi2023/d7.4</a>","ieee":"I. Gräßler and M. Hieb, “Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing,” in <i>Lectures</i>, Nuremberg, 2023, pp. 253–524, doi: <a href=\"https://doi.org/10.5162/smsi2023/d7.4\">10.5162/smsi2023/d7.4</a>.","chicago":"Gräßler, Iris, and Michael Hieb. “Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing.” In <i>Lectures</i>, 253–524. AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2023. <a href=\"https://doi.org/10.5162/smsi2023/d7.4\">https://doi.org/10.5162/smsi2023/d7.4</a>.","mla":"Gräßler, Iris, and Michael Hieb. “Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing.” <i>Lectures</i>, AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2023, pp. 253–524, doi:<a href=\"https://doi.org/10.5162/smsi2023/d7.4\">10.5162/smsi2023/d7.4</a>.","bibtex":"@inproceedings{Gräßler_Hieb_2023, title={Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing}, DOI={<a href=\"https://doi.org/10.5162/smsi2023/d7.4\">10.5162/smsi2023/d7.4</a>}, booktitle={Lectures}, publisher={AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany}, author={Gräßler, Iris and Hieb, Michael}, year={2023}, pages={253–524} }","short":"I. Gräßler, M. Hieb, in: Lectures, AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany, 2023, pp. 253–524.","apa":"Gräßler, I., &#38; Hieb, M. (2023). Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing. <i>Lectures</i>, 253–524. <a href=\"https://doi.org/10.5162/smsi2023/d7.4\">https://doi.org/10.5162/smsi2023/d7.4</a>"},"page":"253-524","year":"2023","publication_status":"published","quality_controlled":"1","conference":{"start_date":"2023-05-08","name":"SMSI 2023. Sensor and Measurement Science International","location":"Nuremberg","end_date":"2023-05-11"},"doi":"10.5162/smsi2023/d7.4","title":"Creating Synthetic Training Datasets for Inspection in Machine Vision Quality Gates in Manufacturing","date_created":"2024-03-25T10:16:24Z","author":[{"id":"47565","full_name":"Gräßler, Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X","first_name":"Iris"},{"last_name":"Hieb","full_name":"Hieb, Michael","id":"72252","first_name":"Michael"}],"date_updated":"2024-03-25T11:05:53Z","publisher":"AMA Service GmbH, Von-Münchhausen-Str. 49, 31515 Wunstorf, Germany","status":"public","abstract":[{"text":"Manufacturing companies face the challenge of reaching required quality standards. Using\r\noptical sensors and deep learning might help. However, training deep learning algorithms\r\nrequire large amounts of visual training data. Using domain randomization to generate synthetic\r\nimage data can alleviate this bottleneck. This paper presents the application of synthetic\r\nimage training data for optical quality inspections using visual sensor technology. The results\r\nshow synthetically generated training data are appropriate for visual quality inspections.","lang":"eng"}],"type":"conference","publication":"Lectures","language":[{"iso":"eng"}],"keyword":["synthetic training data","machine vision quality gates","deep learning","automated inspection and quality control","production control"],"user_id":"5905","department":[{"_id":"152"}],"_id":"52816"},{"user_id":"5905","department":[{"_id":"152"}],"_id":"46450","language":[{"iso":"eng"}],"type":"conference","publication":"Proceedings of the Design Society","status":"public","date_created":"2023-08-07T17:14:34Z","author":[{"full_name":"Gräßler, Iris","id":"47565","last_name":"Gräßler","orcid":"0000-0001-5765-971X","first_name":"Iris"},{"last_name":"Preuß","full_name":"Preuß, Daniel","id":"40253","first_name":"Daniel"},{"first_name":"Lukas","last_name":"Brandt","full_name":"Brandt, Lukas"},{"full_name":"Mohr, Michael","last_name":"Mohr","first_name":"Michael"}],"date_updated":"2024-03-25T11:09:53Z","conference":{"name":"24th International Conference on Engineering Design (ICED23)","start_date":"2023-07-24","end_date":"2023-07-28","location":"Bordeaux"},"doi":"10.1017/pds.2023.160","title":"Efficient Formalisation of Technical Requirements for Generative Engineering","publication_status":"published","quality_controlled":"1","citation":{"ama":"Gräßler I, Preuß D, Brandt L, Mohr M. Efficient Formalisation of Technical Requirements for Generative Engineering. In: <i>Proceedings of the Design Society</i>. ; 2023:1595-1604. doi:<a href=\"https://doi.org/10.1017/pds.2023.160\">10.1017/pds.2023.160</a>","chicago":"Gräßler, Iris, Daniel Preuß, Lukas Brandt, and Michael Mohr. “Efficient Formalisation of Technical Requirements for Generative Engineering.” In <i>Proceedings of the Design Society</i>, 1595–1604, 2023. <a href=\"https://doi.org/10.1017/pds.2023.160\">https://doi.org/10.1017/pds.2023.160</a>.","ieee":"I. Gräßler, D. Preuß, L. Brandt, and M. Mohr, “Efficient Formalisation of Technical Requirements for Generative Engineering,” in <i>Proceedings of the Design Society</i>, Bordeaux, 2023, pp. 1595–1604, doi: <a href=\"https://doi.org/10.1017/pds.2023.160\">10.1017/pds.2023.160</a>.","bibtex":"@inproceedings{Gräßler_Preuß_Brandt_Mohr_2023, title={Efficient Formalisation of Technical Requirements for Generative Engineering}, DOI={<a href=\"https://doi.org/10.1017/pds.2023.160\">10.1017/pds.2023.160</a>}, booktitle={Proceedings of the Design Society}, author={Gräßler, Iris and Preuß, Daniel and Brandt, Lukas and Mohr, Michael}, year={2023}, pages={1595–1604} }","mla":"Gräßler, Iris, et al. “Efficient Formalisation of Technical Requirements for Generative Engineering.” <i>Proceedings of the Design Society</i>, 2023, pp. 1595–604, doi:<a href=\"https://doi.org/10.1017/pds.2023.160\">10.1017/pds.2023.160</a>.","short":"I. Gräßler, D. Preuß, L. Brandt, M. Mohr, in: Proceedings of the Design Society, 2023, pp. 1595–1604.","apa":"Gräßler, I., Preuß, D., Brandt, L., &#38; Mohr, M. (2023). Efficient Formalisation of Technical Requirements for Generative Engineering. <i>Proceedings of the Design Society</i>, 1595–1604. <a href=\"https://doi.org/10.1017/pds.2023.160\">https://doi.org/10.1017/pds.2023.160</a>"},"page":"1595-1604","year":"2023"},{"oa":"1","date_updated":"2024-03-25T12:41:23Z","publisher":"Materials Research Forum LLC","author":[{"last_name":"Wituschek","full_name":"Wituschek, Simon","first_name":"Simon"},{"full_name":"Kappe, Fabian","id":"66459","last_name":"Kappe","first_name":"Fabian"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","full_name":"Meschut, Gerson","id":"32056"},{"first_name":"Michael","full_name":"Lechner, Michael","last_name":"Lechner"}],"date_created":"2024-03-25T10:21:01Z","title":"Combination of versatile self-piercing riveting processes","doi":"10.21741/9781644902417-16","main_file_link":[{"open_access":"1","url":"https://www.mrforum.com/wp-content/uploads/open_access/9781644902417/16.pdf?"}],"quality_controlled":"1","publication_identifier":{"issn":["2474-395X"]},"publication_status":"published","year":"2023","citation":{"ama":"Wituschek S, Kappe F, Meschut G, Lechner M. Combination of versatile self-piercing riveting processes. In: <i>Materials Research Proceedings</i>. Materials Research Forum LLC; 2023. doi:<a href=\"https://doi.org/10.21741/9781644902417-16\">10.21741/9781644902417-16</a>","chicago":"Wituschek, Simon, Fabian Kappe, Gerson Meschut, and Michael Lechner. “Combination of Versatile Self-Piercing Riveting Processes.” In <i>Materials Research Proceedings</i>. Materials Research Forum LLC, 2023. <a href=\"https://doi.org/10.21741/9781644902417-16\">https://doi.org/10.21741/9781644902417-16</a>.","ieee":"S. Wituschek, F. Kappe, G. Meschut, and M. Lechner, “Combination of versatile self-piercing riveting processes,” 2023, doi: <a href=\"https://doi.org/10.21741/9781644902417-16\">10.21741/9781644902417-16</a>.","apa":"Wituschek, S., Kappe, F., Meschut, G., &#38; Lechner, M. (2023). Combination of versatile self-piercing riveting processes. <i>Materials Research Proceedings</i>. <a href=\"https://doi.org/10.21741/9781644902417-16\">https://doi.org/10.21741/9781644902417-16</a>","bibtex":"@inproceedings{Wituschek_Kappe_Meschut_Lechner_2023, title={Combination of versatile self-piercing riveting processes}, DOI={<a href=\"https://doi.org/10.21741/9781644902417-16\">10.21741/9781644902417-16</a>}, booktitle={Materials Research Proceedings}, publisher={Materials Research Forum LLC}, author={Wituschek, Simon and Kappe, Fabian and Meschut, Gerson and Lechner, Michael}, year={2023} }","short":"S. Wituschek, F. Kappe, G. Meschut, M. Lechner, in: Materials Research Proceedings, Materials Research Forum LLC, 2023.","mla":"Wituschek, Simon, et al. “Combination of Versatile Self-Piercing Riveting Processes.” <i>Materials Research Proceedings</i>, Materials Research Forum LLC, 2023, doi:<a href=\"https://doi.org/10.21741/9781644902417-16\">10.21741/9781644902417-16</a>."},"_id":"52821","project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"department":[{"_id":"157"}],"user_id":"7850","language":[{"iso":"eng"}],"publication":"Materials Research Proceedings","type":"conference","abstract":[{"text":"Due to economic and ecological framework conditions, a resource-saving utilization of raw materials and energy is becoming increasingly important in particular in the mobility sector. For the reduction of moving masses and the resources consumed, lightweight construction technologies are part of modern production processes in vehicle manufacturing, for example in the form of multi-material systems. Challenging in the manufacture of multi-material systems especially in view of changing supply chains is the variety of materials and geometries that bring conventional joining processes to their limits. Therefore, new processes are required, which can react versatile to process and disturbance variables. A widely used industrial joining process is semi-tubular self-piercing riveting, which is however a rigid process. To increase the versatility, the two newly established processes multi-range self-piercing riveting and tumbling self-piercing riveting are combined and the capabilities for targeted material flow control are united. Therefore, an innovative two-stage process based on the combination is introduced in this paper. The rivet is set with the multi-range self-piercing riveting process with an overlap of the rivet head and then formed by a tumbling process. Further, a specific adaptation of the tumbling strategy is used to investigate the possibility of reducing cracks in the rivet head. Thereby, different tumbling strategies are used and similar geometric joint formations are achieved to compare the results. </jats:p>","lang":"eng"}],"status":"public"},{"type":"dissertation","abstract":[{"text":"The importance of fiber-reinforced plastics for lightweight construction applications is steadily increasing due to their outstanding weight-specific property values. However, a decisive disadvantage of these composite materials has so far been the high material and process costs, which is why fiber-reinforced plastics are almost exclusively used in small to medium-sized series. Optimization of manufacturing methods is of great importance to reduce the production cost. In this study, two concepts are proposed that can optimize vacuum assisted light resin transfer molding (VA-LRTM) further, leading to a possibility of fully automatic process. Conventional VA-LRTM methods are used to produce complex fiber-reinforced plastics (FRP) and hybrid components. Traditional molds used to produce components via VA-LRTM are sealed using polymer materials to prevent the leakage of matrix system. The seals undergo tremendous amounts of thermal, chemical, and mechanical loadings. Thus, sealings must be replaced in short intervals. In the current study, a concept where sealing is achieved by accelerating the curing of matrix system itself with the help of heating elements and catalysts resulting in a self-sealing approach is proposed. Another concern is mold surface contamination during component production. To address this, a modified automatic cleaning technique based on ultrasonic cleaning was proposed which can be integrated into the production line with minimum modification. Both the proposed concepts were validated and optimized using experiments, simulations, and analytical approaches by producing metal-FRP hybrid shafts.","lang":"eng"}],"file":[{"date_updated":"2024-01-11T09:24:01Z","date_created":"2024-01-11T09:24:01Z","creator":"dcj","file_size":7694237,"access_level":"closed","file_id":"50451","file_name":"01_Dissertation_CJDP_7065653_V1.pdf","content_type":"application/pdf","success":1,"relation":"main_file"}],"status":"public","_id":"50449","user_id":"49504","department":[{"_id":"9"},{"_id":"149"},{"_id":"321"}],"ddc":["670"],"keyword":["fiber-reinforced plastics","resin transfer molding","composites"],"language":[{"iso":"eng"}],"file_date_updated":"2024-01-11T09:24:01Z","has_accepted_license":"1","year":"2023","citation":{"short":"D. Chalicheemalapalli Jayasankar, Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques, 2023.","bibtex":"@book{Chalicheemalapalli Jayasankar_2023, title={Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques}, author={Chalicheemalapalli Jayasankar, Deviprasad}, year={2023} }","mla":"Chalicheemalapalli Jayasankar, Deviprasad. <i>Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques</i>. 2023.","apa":"Chalicheemalapalli Jayasankar, D. (2023). <i>Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques</i>.","chicago":"Chalicheemalapalli Jayasankar, Deviprasad. <i>Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques</i>, 2023.","ieee":"D. Chalicheemalapalli Jayasankar, <i>Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques</i>. 2023.","ama":"Chalicheemalapalli Jayasankar D. <i>Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques</i>.; 2023."},"date_updated":"2024-03-26T09:18:31Z","author":[{"id":"49504","full_name":"Chalicheemalapalli Jayasankar, Deviprasad","last_name":"Chalicheemalapalli Jayasankar","orcid":"https://orcid.org/ 0000-0002-3446-2444","first_name":"Deviprasad"}],"date_created":"2024-01-11T09:28:04Z","supervisor":[{"full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"},{"first_name":"Wolfgang","last_name":"Bremser","full_name":"Bremser, Wolfgang"}],"title":"Advances In RTM Manufacturing Of Metal-FRP Hybrids By Self-Sealing And In-Mold Cleaning Techniques"},{"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"49504","_id":"45831","language":[{"iso":"eng"}],"file_date_updated":"2023-07-03T08:15:04Z","keyword":["Compression Molding","Glass Mat Thermoplastics","Hybrid Brake Pedal"],"ddc":["620"],"type":"conference_abstract","status":"public","file":[{"date_updated":"2023-07-03T08:15:04Z","date_created":"2023-07-03T08:15:04Z","creator":"dcj","file_size":359467,"file_id":"45832","access_level":"closed","file_name":"LightMAT-2023_Extended Abstract.pdf","content_type":"application/pdf","success":1,"relation":"main_file"}],"author":[{"first_name":"Deviprasad","orcid":"https://orcid.org/ 0000-0002-3446-2444","last_name":"Chalicheemalapalli Jayasankar","id":"49504","full_name":"Chalicheemalapalli Jayasankar, Deviprasad"},{"first_name":"Tim","full_name":"Stallmeister, Tim","id":"45538","last_name":"Stallmeister"},{"first_name":"Julian","last_name":"Lückenkötter","full_name":"Lückenkötter, Julian","id":"45543"},{"last_name":"Tröster","id":"553","full_name":"Tröster, Thomas","first_name":"Thomas"}],"date_created":"2023-07-03T08:23:15Z","date_updated":"2024-03-26T09:19:44Z","conference":{"name":"5th International Conference on Light Materials - Science and Technology LightMAT 2023","start_date":"2023-06-21","end_date":"2023-06-23","location":"Trondheim, Norway "},"title":"In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding","has_accepted_license":"1","citation":{"ama":"Chalicheemalapalli Jayasankar D, Stallmeister T, Lückenkötter J, Tröster T. In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding. In: ; 2023.","chicago":"Chalicheemalapalli Jayasankar, Deviprasad, Tim Stallmeister, Julian Lückenkötter, and Thomas Tröster. “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” 2023.","ieee":"D. Chalicheemalapalli Jayasankar, T. Stallmeister, J. Lückenkötter, and T. Tröster, “In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding,” presented at the 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway , 2023.","apa":"Chalicheemalapalli Jayasankar, D., Stallmeister, T., Lückenkötter, J., &#38; Tröster, T. (2023). <i>In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding</i>. 5th International Conference on Light Materials - Science and Technology LightMAT 2023, Trondheim, Norway .","mla":"Chalicheemalapalli Jayasankar, Deviprasad, et al. <i>In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding</i>. 2023.","short":"D. Chalicheemalapalli Jayasankar, T. Stallmeister, J. Lückenkötter, T. Tröster, in: 2023.","bibtex":"@inproceedings{Chalicheemalapalli Jayasankar_Stallmeister_Lückenkötter_Tröster_2023, title={In-Mold Assembly of Hybrid GMT-Steel Brake Pedals by Compression Molding}, author={Chalicheemalapalli Jayasankar, Deviprasad and Stallmeister, Tim and Lückenkötter, Julian and Tröster, Thomas}, year={2023} }"},"year":"2023"},{"ddc":["300"],"keyword":["Human-Computer Interaction","General Social Sciences","Social Psychology","Virtual Reality : Multimodality","Nonverbal Interaction","Search Sequence","Gesture","Co-Operative Action","Goodwin","Ethnomethodology"],"language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"<jats:p>In virtual reality (VR), participants may not always have hands, bodies, eyes, or even voices—using VR helmets and two controllers, participants control an avatar through virtual worlds that do not necessarily obey familiar laws of physics; moreover, the avatar’s bodily characteristics may not neatly match our bodies in the physical world. Despite these limitations and specificities, humans get things done through collaboration and the creative use of the environment. While multiuser interactive VR is attracting greater numbers of participants, there are currently few attempts to analyze the in situ interaction systematically. This paper proposes a video-analytic detail-oriented methodological framework for studying virtual reality interaction. Using multimodal conversation analysis, the paper investigates a nonverbal, embodied, two-person interaction: two players in a survival game strive to gesturally resolve a misunderstanding regarding an in-game mechanic—however, both of their microphones are turned off for the duration of play. The players’ inability to resort to complex language to resolve this issue results in a dense sequence of back-and-forth activity involving gestures, object manipulation, gaze, and body work. Most crucially, timing and modified repetitions of previously produced actions turn out to be the key to overcome both technical and communicative challenges. The paper analyzes these action sequences, demonstrates how they generate intended outcomes, and proposes a vocabulary to speak about these types of interaction more generally. The findings demonstrate the viability of multimodal analysis of VR interaction, shed light on unique challenges of analyzing interaction in virtual reality, and generate broader methodological insights about the study of nonverbal action.</jats:p>"}],"file":[{"relation":"main_file","success":1,"content_type":"application/pdf","file_id":"43438","file_name":"Klowait_2023a.pdf","access_level":"closed","file_size":2877385,"creator":"nklowait","date_created":"2023-04-06T11:00:01Z","date_updated":"2023-04-06T11:00:01Z"}],"publication":"Human Behavior and Emerging Technologies","title":"On the Multimodal Resolution of a Search Sequence in Virtual Reality","publisher":"Hindawi Limited","date_created":"2023-04-06T10:57:28Z","year":"2023","quality_controlled":"1","article_type":"original","funded_apc":"1","file_date_updated":"2023-04-06T11:00:01Z","project":[{"name":"TRR 318 - Ö: TRR 318 - Project Area Ö","_id":"119"}],"_id":"43437","user_id":"98454","department":[{"_id":"9"}],"status":"public","type":"journal_article","main_file_link":[{"open_access":"1","url":"https://doi.org/10.1155/2023/8417012"}],"doi":"10.1155/2023/8417012","date_updated":"2024-03-26T09:40:53Z","oa":"1","author":[{"first_name":"Nils","last_name":"Klowait","orcid":"0000-0002-7347-099X","id":"98454","full_name":"Klowait, Nils"}],"volume":2023,"citation":{"ama":"Klowait N. On the Multimodal Resolution of a Search Sequence in Virtual Reality. <i>Human Behavior and Emerging Technologies</i>. 2023;2023:1-15. doi:<a href=\"https://doi.org/10.1155/2023/8417012\">10.1155/2023/8417012</a>","chicago":"Klowait, Nils. “On the Multimodal Resolution of a Search Sequence in Virtual Reality.” <i>Human Behavior and Emerging Technologies</i> 2023 (2023): 1–15. <a href=\"https://doi.org/10.1155/2023/8417012\">https://doi.org/10.1155/2023/8417012</a>.","ieee":"N. Klowait, “On the Multimodal Resolution of a Search Sequence in Virtual Reality,” <i>Human Behavior and Emerging Technologies</i>, vol. 2023, pp. 1–15, 2023, doi: <a href=\"https://doi.org/10.1155/2023/8417012\">10.1155/2023/8417012</a>.","apa":"Klowait, N. (2023). On the Multimodal Resolution of a Search Sequence in Virtual Reality. <i>Human Behavior and Emerging Technologies</i>, <i>2023</i>, 1–15. <a href=\"https://doi.org/10.1155/2023/8417012\">https://doi.org/10.1155/2023/8417012</a>","bibtex":"@article{Klowait_2023, title={On the Multimodal Resolution of a Search Sequence in Virtual Reality}, volume={2023}, DOI={<a href=\"https://doi.org/10.1155/2023/8417012\">10.1155/2023/8417012</a>}, journal={Human Behavior and Emerging Technologies}, publisher={Hindawi Limited}, author={Klowait, Nils}, year={2023}, pages={1–15} }","mla":"Klowait, Nils. “On the Multimodal Resolution of a Search Sequence in Virtual Reality.” <i>Human Behavior and Emerging Technologies</i>, vol. 2023, Hindawi Limited, 2023, pp. 1–15, doi:<a href=\"https://doi.org/10.1155/2023/8417012\">10.1155/2023/8417012</a>.","short":"N. Klowait, Human Behavior and Emerging Technologies 2023 (2023) 1–15."},"intvolume":"      2023","page":"1-15","publication_status":"published","has_accepted_license":"1","publication_identifier":{"issn":["2578-1863"]}},{"quality_controlled":"1","issue":"1","year":"2023","publisher":"Det Kgl. Bibliotek/Royal Danish Library","date_created":"2023-06-13T11:35:02Z","title":"Halting the Decay of Talk","publication":"Social Interaction. Video-Based Studies of Human Sociality","abstract":[{"lang":"eng","text":"<jats:p>We investigate how people with atypical bodily capabilities interact within virtual reality (VR) and the way they overcome interactional challenges in these emerging social environments. Based on a videographic multimodal single case analysis, we demonstrate how non-speaking VR participants furnish their bodies, at-hand instruments, and their interactive environment for their practical purposes. Our findings are subsequently related to renewed discussions of the relationship between agency and environment, and the co-constructed nature of situated action. We thus aim to contribute to the growing vocabulary of atypical interaction analysis and the broader context of ethnomethodological conceptualizations of unorthodox and fractured interactional ecologies.</jats:p>"}],"keyword":["General Medicine"],"language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"issn":["2446-3620"]},"citation":{"ieee":"N. Klowait and M. Erofeeva, “Halting the Decay of Talk,” <i>Social Interaction. Video-Based Studies of Human Sociality</i>, vol. 6, no. 1, 2023, doi: <a href=\"https://doi.org/10.7146/si.v6i1.136903\">10.7146/si.v6i1.136903</a>.","chicago":"Klowait, Nils, and Maria Erofeeva. “Halting the Decay of Talk.” <i>Social Interaction. Video-Based Studies of Human Sociality</i> 6, no. 1 (2023). <a href=\"https://doi.org/10.7146/si.v6i1.136903\">https://doi.org/10.7146/si.v6i1.136903</a>.","ama":"Klowait N, Erofeeva M. Halting the Decay of Talk. <i>Social Interaction Video-Based Studies of Human Sociality</i>. 2023;6(1). doi:<a href=\"https://doi.org/10.7146/si.v6i1.136903\">10.7146/si.v6i1.136903</a>","apa":"Klowait, N., &#38; Erofeeva, M. (2023). Halting the Decay of Talk. <i>Social Interaction. Video-Based Studies of Human Sociality</i>, <i>6</i>(1). <a href=\"https://doi.org/10.7146/si.v6i1.136903\">https://doi.org/10.7146/si.v6i1.136903</a>","short":"N. Klowait, M. Erofeeva, Social Interaction. Video-Based Studies of Human Sociality 6 (2023).","mla":"Klowait, Nils, and Maria Erofeeva. “Halting the Decay of Talk.” <i>Social Interaction. Video-Based Studies of Human Sociality</i>, vol. 6, no. 1, Det Kgl. Bibliotek/Royal Danish Library, 2023, doi:<a href=\"https://doi.org/10.7146/si.v6i1.136903\">10.7146/si.v6i1.136903</a>.","bibtex":"@article{Klowait_Erofeeva_2023, title={Halting the Decay of Talk}, volume={6}, DOI={<a href=\"https://doi.org/10.7146/si.v6i1.136903\">10.7146/si.v6i1.136903</a>}, number={1}, journal={Social Interaction. Video-Based Studies of Human Sociality}, publisher={Det Kgl. Bibliotek/Royal Danish Library}, author={Klowait, Nils and Erofeeva, Maria}, year={2023} }"},"intvolume":"         6","date_updated":"2024-03-26T09:41:35Z","author":[{"first_name":"Nils","last_name":"Klowait","orcid":"0000-0002-7347-099X","full_name":"Klowait, Nils","id":"98454"},{"first_name":"Maria","full_name":"Erofeeva, Maria","last_name":"Erofeeva"}],"volume":6,"doi":"10.7146/si.v6i1.136903","type":"journal_article","status":"public","project":[{"name":"TRR 318 - Ö: TRR 318 - Project Area Ö","_id":"119"}],"_id":"45599","user_id":"98454","department":[{"_id":"9"}],"article_type":"original","alternative_title":["How Atypical Interactants Adapt their Virtual Worlds"]},{"user_id":"5905","department":[{"_id":"152"}],"_id":"52832","language":[{"iso":"eng"}],"keyword":["General Medicine"],"type":"conference","publication":"Procedia CIRP","status":"public","date_created":"2024-03-25T10:39:20Z","author":[{"full_name":"Weller, Julian","last_name":"Weller","first_name":"Julian"},{"id":"54680","full_name":"Roesmann, Daniel","last_name":"Roesmann","first_name":"Daniel"},{"first_name":"Sönke","last_name":"Eggert","full_name":"Eggert, Sönke"},{"first_name":"Sebastian","full_name":"von Enzberg, Sebastian","last_name":"von Enzberg"},{"first_name":"Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X","id":"47565","full_name":"Gräßler, Iris"},{"last_name":"Dumitrescu","full_name":"Dumitrescu, Roman","first_name":"Roman"}],"volume":119,"date_updated":"2024-03-26T18:07:35Z","publisher":"Elsevier BV","doi":"10.1016/j.procir.2023.01.011","title":"Identification and prediction of standard times in machining for precision steel tubes through the usage of data analytics","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["2212-8271"]},"citation":{"ieee":"J. Weller, D. Roesmann, S. Eggert, S. von Enzberg, I. Gräßler, and R. Dumitrescu, “Identification and prediction of standard times in machining for precision steel tubes through the usage of data analytics,” in <i>Procedia CIRP</i>, 2023, vol. 119, pp. 514–520, doi: <a href=\"https://doi.org/10.1016/j.procir.2023.01.011\">10.1016/j.procir.2023.01.011</a>.","chicago":"Weller, Julian, Daniel Roesmann, Sönke Eggert, Sebastian von Enzberg, Iris Gräßler, and Roman Dumitrescu. “Identification and Prediction of Standard Times in Machining for Precision Steel Tubes through the Usage of Data Analytics.” In <i>Procedia CIRP</i>, 119:514–20. Elsevier BV, 2023. <a href=\"https://doi.org/10.1016/j.procir.2023.01.011\">https://doi.org/10.1016/j.procir.2023.01.011</a>.","ama":"Weller J, Roesmann D, Eggert S, von Enzberg S, Gräßler I, Dumitrescu R. Identification and prediction of standard times in machining for precision steel tubes through the usage of data analytics. In: <i>Procedia CIRP</i>. Vol 119. Elsevier BV; 2023:514-520. doi:<a href=\"https://doi.org/10.1016/j.procir.2023.01.011\">10.1016/j.procir.2023.01.011</a>","short":"J. Weller, D. Roesmann, S. Eggert, S. von Enzberg, I. Gräßler, R. Dumitrescu, in: Procedia CIRP, Elsevier BV, 2023, pp. 514–520.","bibtex":"@inproceedings{Weller_Roesmann_Eggert_von Enzberg_Gräßler_Dumitrescu_2023, title={Identification and prediction of standard times in machining for precision steel tubes through the usage of data analytics}, volume={119}, DOI={<a href=\"https://doi.org/10.1016/j.procir.2023.01.011\">10.1016/j.procir.2023.01.011</a>}, booktitle={Procedia CIRP}, publisher={Elsevier BV}, author={Weller, Julian and Roesmann, Daniel and Eggert, Sönke and von Enzberg, Sebastian and Gräßler, Iris and Dumitrescu, Roman}, year={2023}, pages={514–520} }","mla":"Weller, Julian, et al. “Identification and Prediction of Standard Times in Machining for Precision Steel Tubes through the Usage of Data Analytics.” <i>Procedia CIRP</i>, vol. 119, Elsevier BV, 2023, pp. 514–20, doi:<a href=\"https://doi.org/10.1016/j.procir.2023.01.011\">10.1016/j.procir.2023.01.011</a>.","apa":"Weller, J., Roesmann, D., Eggert, S., von Enzberg, S., Gräßler, I., &#38; Dumitrescu, R. (2023). Identification and prediction of standard times in machining for precision steel tubes through the usage of data analytics. <i>Procedia CIRP</i>, <i>119</i>, 514–520. <a href=\"https://doi.org/10.1016/j.procir.2023.01.011\">https://doi.org/10.1016/j.procir.2023.01.011</a>"},"page":"514-520","intvolume":"       119","year":"2023"},{"author":[{"full_name":"Apazeller, Sascha","last_name":"Apazeller","first_name":"Sascha"},{"last_name":"Gonchikzhapov","full_name":"Gonchikzhapov, Munko","first_name":"Munko"},{"last_name":"Nanjaiah","full_name":"Nanjaiah, Monika","first_name":"Monika"},{"full_name":"Kasper, Tina","last_name":"Kasper","first_name":"Tina"},{"last_name":"Wlokas","full_name":"Wlokas, Irenäus","first_name":"Irenäus"},{"last_name":"Wiggers","full_name":"Wiggers, Hartmut","first_name":"Hartmut"},{"full_name":"Schulz, Christof","last_name":"Schulz","first_name":"Christof"}],"date_created":"2024-03-27T16:14:34Z","volume":39,"date_updated":"2024-03-27T16:30:15Z","publisher":"Elsevier BV","doi":"10.1016/j.proci.2022.07.166","title":"A new dual matrix burner for one-dimensional investigation of aerosol flames","issue":"1","publication_status":"published","publication_identifier":{"issn":["1540-7489"]},"quality_controlled":"1","citation":{"ieee":"S. Apazeller <i>et al.</i>, “A new dual matrix burner for one-dimensional investigation of aerosol flames,” <i>Proceedings of the Combustion Institute</i>, vol. 39, no. 1, pp. 909–918, 2023, doi: <a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>.","chicago":"Apazeller, Sascha, Munko Gonchikzhapov, Monika Nanjaiah, Tina Kasper, Irenäus Wlokas, Hartmut Wiggers, and Christof Schulz. “A New Dual Matrix Burner for One-Dimensional Investigation of Aerosol Flames.” <i>Proceedings of the Combustion Institute</i> 39, no. 1 (2023): 909–18. <a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">https://doi.org/10.1016/j.proci.2022.07.166</a>.","ama":"Apazeller S, Gonchikzhapov M, Nanjaiah M, et al. A new dual matrix burner for one-dimensional investigation of aerosol flames. <i>Proceedings of the Combustion Institute</i>. 2023;39(1):909-918. doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>","apa":"Apazeller, S., Gonchikzhapov, M., Nanjaiah, M., Kasper, T., Wlokas, I., Wiggers, H., &#38; Schulz, C. (2023). A new dual matrix burner for one-dimensional investigation of aerosol flames. <i>Proceedings of the Combustion Institute</i>, <i>39</i>(1), 909–918. <a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">https://doi.org/10.1016/j.proci.2022.07.166</a>","bibtex":"@article{Apazeller_Gonchikzhapov_Nanjaiah_Kasper_Wlokas_Wiggers_Schulz_2023, title={A new dual matrix burner for one-dimensional investigation of aerosol flames}, volume={39}, DOI={<a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>}, number={1}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Apazeller, Sascha and Gonchikzhapov, Munko and Nanjaiah, Monika and Kasper, Tina and Wlokas, Irenäus and Wiggers, Hartmut and Schulz, Christof}, year={2023}, pages={909–918} }","short":"S. Apazeller, M. Gonchikzhapov, M. Nanjaiah, T. Kasper, I. Wlokas, H. Wiggers, C. Schulz, Proceedings of the Combustion Institute 39 (2023) 909–918.","mla":"Apazeller, Sascha, et al. “A New Dual Matrix Burner for One-Dimensional Investigation of Aerosol Flames.” <i>Proceedings of the Combustion Institute</i>, vol. 39, no. 1, Elsevier BV, 2023, pp. 909–18, doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>."},"intvolume":"        39","page":"909-918","year":"2023","user_id":"94562","department":[{"_id":"728"}],"_id":"53078","language":[{"iso":"eng"}],"article_type":"original","keyword":["Physical and Theoretical Chemistry","Mechanical Engineering","General Chemical Engineering"],"type":"journal_article","publication":"Proceedings of the Combustion Institute","status":"public","abstract":[{"lang":"eng","text":"In spray-flame synthesis of nanoparticles, a precise understanding of the reaction processes is necessary to find optimal process parameters for the formation of the desired products. Coupling the chemistries of flame, solvent, and gas-phase species initially formed from the particle precursor in combination with the complex flow geometry of the spray flame means a special challenge for the modeling of the reaction processes. A new burner has been developed that is capable to observe the reaction of precursor solutions frequently used in spray-flame synthesis. The burner provides an almost flat, laminar, and steady flame with homogeneous addition of a fine aerosol and thus enables detailed investigation and modeling of the coupled reactions inde-pendent of spray formation and turbulent mixing. With its two separate supply channel matrices, the burner also enables the use of reactants that would otherwise react with each other already before reaching the flame. These features enable the investigation of a wide range of flame-based synthesis methods for nanoparticles and, due to the flat-flame geometry, kinetics models for these processes can be developed and validated. This work describes the matrix burner development and its gas flow optimization by simulation. Droplet-size dis-tributions generated by ultrasonic nebulization and their interaction with the burner structure are investigated by phase-Doppler anemometry. As an example for nanoparticle-for ming flames from solutions, iron-oxide nanoparticle-generating flames using iron(III) nitrate nonahydrate dissolved in 1-butanol were investigated. This effort includes measurements of two-dimensional maps of the flame temperature by a thermocouple and height-dependent concentration profiles of the main species by time-of-flight mass spectrometry. Exper-imental data are compared with 1D simulations using a reduced reaction mechanism. The results show that the new burner is well suited for the development of reaction models for precursors supplied in the liquid phase usually applied in spray-flame synthesis configurations.& COPY; 2022 The Combustion Institute. Published by Elsevier Inc. All rights reserved."}]},{"_id":"53075","user_id":"94562","department":[{"_id":"728"}],"article_type":"original","language":[{"iso":"eng"}],"type":"journal_article","publication":"Combustion and Flame","abstract":[{"text":"Polycyclic aromatic hydrocarbons (PAHs) are formed in fuel-rich and sooting hydrocarbon flames. These compounds and smaller aromatic flame constituents, such as benzene, toluene and naphthalene can be detected by flame-sampling molecular beam mass spectrometry (MBMS). They are readily ionized by photoionization with UV light, either in resonant or non-resonant ionization processes. The multiphoton ionization of benzene, toluene, and styrene with MBMS detection was investigated as a function of laser power and wavelength and the quantitative relation between ion signal and mole fractions in the flames was established. These measurements were prerequisites for the measurement of quantitative mole fraction profiles of these species in flames of various fuels. In addition, the measurements provide relative mole fraction profiles of various other aromatic flame species. The results are compared to measurements of aromatics in butadiene, propyne, and allene flames by single-photon ionization with vacuum ultraviolet radiation from a synchrotron source and other literature data. (c) 2023 Published by Elsevier Inc. on behalf of The Combustion Institute.","lang":"eng"}],"status":"public","date_updated":"2024-03-27T16:24:28Z","date_created":"2024-03-27T16:09:38Z","author":[{"last_name":"Kasper","orcid":"0000-0003-3993-5316 ","id":"94562","full_name":"Kasper, Tina","first_name":"Tina"},{"first_name":"Nils","last_name":"Hansen","full_name":"Hansen, Nils"}],"volume":257,"title":"Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames","quality_controlled":"1","issue":"1","year":"2023","citation":{"apa":"Kasper, T., &#38; Hansen, N. (2023). Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames. <i>Combustion and Flame</i>, <i>257</i>(1).","short":"T. Kasper, N. Hansen, Combustion and Flame 257 (2023).","bibtex":"@article{Kasper_Hansen_2023, title={Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames}, volume={257}, number={1}, journal={Combustion and Flame}, author={Kasper, Tina and Hansen, Nils}, year={2023} }","mla":"Kasper, Tina, and Nils Hansen. “Resonance Enhanced Multiphoton Ionization Detection of Aromatics Formation in Fuel-Rich Flames.” <i>Combustion and Flame</i>, vol. 257, no. 1, 2023.","ama":"Kasper T, Hansen N. Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames. <i>Combustion and Flame</i>. 2023;257(1).","chicago":"Kasper, Tina, and Nils Hansen. “Resonance Enhanced Multiphoton Ionization Detection of Aromatics Formation in Fuel-Rich Flames.” <i>Combustion and Flame</i> 257, no. 1 (2023).","ieee":"T. Kasper and N. Hansen, “Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames,” <i>Combustion and Flame</i>, vol. 257, no. 1, 2023."},"intvolume":"       257"},{"language":[{"iso":"eng"}],"keyword":["Physical and Theoretical Chemistry","Mechanical Engineering","General Chemical Engineering"],"department":[{"_id":"9"},{"_id":"728"}],"user_id":"94562","_id":"36812","status":"public","publication":"Proceedings of the Combustion Institute","type":"journal_article","doi":"10.1016/j.proci.2022.07.166","title":"A new dual matrix burner for one-dimensional investigation of aerosol flames","date_created":"2023-01-13T16:28:59Z","author":[{"first_name":"Sascha","last_name":"Apazeller","full_name":"Apazeller, Sascha"},{"first_name":"Munko","id":"94996","full_name":"Gonchikzhapov, Munko","last_name":"Gonchikzhapov","orcid":"https://orcid.org/0000-0002-7773-047X"},{"first_name":"Monika","full_name":"Nanjaiah, Monika","last_name":"Nanjaiah"},{"id":"94562","full_name":"Kasper, Tina","last_name":"Kasper","orcid":"0000-0003-3993-5316 ","first_name":"Tina"},{"first_name":"Irenäus","last_name":"Wlokas","full_name":"Wlokas, Irenäus"},{"first_name":"Hartmut","last_name":"Wiggers","full_name":"Wiggers, Hartmut"},{"full_name":"Schulz, Christof","last_name":"Schulz","first_name":"Christof"}],"publisher":"Elsevier BV","date_updated":"2024-03-27T17:31:06Z","citation":{"apa":"Apazeller, S., Gonchikzhapov, M., Nanjaiah, M., Kasper, T., Wlokas, I., Wiggers, H., &#38; Schulz, C. (2023). A new dual matrix burner for one-dimensional investigation of aerosol flames. <i>Proceedings of the Combustion Institute</i>. <a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">https://doi.org/10.1016/j.proci.2022.07.166</a>","bibtex":"@article{Apazeller_Gonchikzhapov_Nanjaiah_Kasper_Wlokas_Wiggers_Schulz_2023, title={A new dual matrix burner for one-dimensional investigation of aerosol flames}, DOI={<a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier BV}, author={Apazeller, Sascha and Gonchikzhapov, Munko and Nanjaiah, Monika and Kasper, Tina and Wlokas, Irenäus and Wiggers, Hartmut and Schulz, Christof}, year={2023} }","short":"S. Apazeller, M. Gonchikzhapov, M. Nanjaiah, T. Kasper, I. Wlokas, H. Wiggers, C. Schulz, Proceedings of the Combustion Institute (2023).","mla":"Apazeller, Sascha, et al. “A New Dual Matrix Burner for One-Dimensional Investigation of Aerosol Flames.” <i>Proceedings of the Combustion Institute</i>, Elsevier BV, 2023, doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>.","ama":"Apazeller S, Gonchikzhapov M, Nanjaiah M, et al. A new dual matrix burner for one-dimensional investigation of aerosol flames. <i>Proceedings of the Combustion Institute</i>. Published online 2023. doi:<a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>","ieee":"S. Apazeller <i>et al.</i>, “A new dual matrix burner for one-dimensional investigation of aerosol flames,” <i>Proceedings of the Combustion Institute</i>, 2023, doi: <a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">10.1016/j.proci.2022.07.166</a>.","chicago":"Apazeller, Sascha, Munko Gonchikzhapov, Monika Nanjaiah, Tina Kasper, Irenäus Wlokas, Hartmut Wiggers, and Christof Schulz. “A New Dual Matrix Burner for One-Dimensional Investigation of Aerosol Flames.” <i>Proceedings of the Combustion Institute</i>, 2023. <a href=\"https://doi.org/10.1016/j.proci.2022.07.166\">https://doi.org/10.1016/j.proci.2022.07.166</a>."},"year":"2023","publication_identifier":{"issn":["1540-7489"]},"publication_status":"published"},{"publisher":"Elsevier BV","date_updated":"2024-03-27T16:23:48Z","date_created":"2024-03-27T16:07:31Z","author":[{"full_name":"Kasper, Tina","last_name":"Kasper","first_name":"Tina"},{"last_name":"Hansen","full_name":"Hansen, Nils","first_name":"Nils"}],"volume":257,"title":"Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames","doi":"10.1016/j.combustflame.2023.112820","publication_status":"published","publication_identifier":{"issn":["0010-2180"]},"year":"2023","citation":{"apa":"Kasper, T., &#38; Hansen, N. (2023). Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames. <i>Combustion and Flame</i>, <i>257</i>, Article 112820. <a href=\"https://doi.org/10.1016/j.combustflame.2023.112820\">https://doi.org/10.1016/j.combustflame.2023.112820</a>","bibtex":"@article{Kasper_Hansen_2023, title={Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames}, volume={257}, DOI={<a href=\"https://doi.org/10.1016/j.combustflame.2023.112820\">10.1016/j.combustflame.2023.112820</a>}, number={112820}, journal={Combustion and Flame}, publisher={Elsevier BV}, author={Kasper, Tina and Hansen, Nils}, year={2023} }","mla":"Kasper, Tina, and Nils Hansen. “Resonance Enhanced Multiphoton Ionization Detection of Aromatics Formation in Fuel-Rich Flames.” <i>Combustion and Flame</i>, vol. 257, 112820, Elsevier BV, 2023, doi:<a href=\"https://doi.org/10.1016/j.combustflame.2023.112820\">10.1016/j.combustflame.2023.112820</a>.","short":"T. Kasper, N. Hansen, Combustion and Flame 257 (2023).","ama":"Kasper T, Hansen N. Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames. <i>Combustion and Flame</i>. 2023;257. doi:<a href=\"https://doi.org/10.1016/j.combustflame.2023.112820\">10.1016/j.combustflame.2023.112820</a>","chicago":"Kasper, Tina, and Nils Hansen. “Resonance Enhanced Multiphoton Ionization Detection of Aromatics Formation in Fuel-Rich Flames.” <i>Combustion and Flame</i> 257 (2023). <a href=\"https://doi.org/10.1016/j.combustflame.2023.112820\">https://doi.org/10.1016/j.combustflame.2023.112820</a>.","ieee":"T. Kasper and N. Hansen, “Resonance enhanced multiphoton ionization detection of aromatics formation in fuel-rich flames,” <i>Combustion and Flame</i>, vol. 257, Art. no. 112820, 2023, doi: <a href=\"https://doi.org/10.1016/j.combustflame.2023.112820\">10.1016/j.combustflame.2023.112820</a>."},"intvolume":"       257","_id":"53074","user_id":"94562","department":[{"_id":"728"}],"article_number":"112820","keyword":["General Physics and Astronomy","Energy Engineering and Power Technology","Fuel Technology","General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}],"type":"journal_article","publication":"Combustion and Flame","status":"public"},{"publication":"Zeitschrift für wirtschaftlichen Fabrikbetrieb","abstract":[{"lang":"eng","text":"In der zukünftigen Produktion werden der Aufbau und die Entwicklung der Fähigkeiten der Mitarbeiter:innen ein entscheidender Wettbewerbsvorteil von Unternehmen. In menschenzentrierten Montagesystemen passen sich die Mitarbeiter:innen auf der Grundlage von Lernprozessen an neue und sich ändernde Aufgaben an. Dazu muss der Bezug zu den Fähigkeiten der Mitarbeiter:innen im Zuge der integrierten Produkt-und Prozessentwicklung vorgesehen werden. Daher wurde eine Methodik entwickelt, die diese Fähigkeiten explizit abbildet und sie sowohl in der Entwicklung als auch in der kurzfristigen Personaleinsatzplanung bei der Aufgabenzuordnung berücksichtigt. Zur Anwendung wurde die Methodik prototypisch in einem Software-Werkzeug umgesetzt und in Kombination mit einer diskreten ereignisorientierten Simulation erprobt."}],"keyword":["Management Science and Operations Research","Strategy and Management","General Engineering"],"language":[{"iso":"ger"}],"quality_controlled":"1","issue":"3","year":"2023","publisher":"Walter de Gruyter GmbH","date_created":"2023-04-27T06:27:25Z","title":"Human Factors in der integrierten Produktentwicklung","type":"journal_article","status":"public","_id":"44215","department":[{"_id":"152"}],"user_id":"405","alternative_title":["Semantische Technologien für die Einbeziehung von Human Factors in die integrierte Produktentwicklung am Beispiel der Austaktung von Montagelinien"],"publication_identifier":{"issn":["2511-0896","0947-0085"]},"publication_status":"published","page":"149-152","intvolume":"       118","citation":{"mla":"Gräßler, Iris, et al. “Human Factors in der integrierten Produktentwicklung.” <i>Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>, vol. 118, no. 3, Walter de Gruyter GmbH, 2023, pp. 149–52, doi:<a href=\"https://doi.org/10.1515/zwf-2023-1029\">10.1515/zwf-2023-1029</a>.","short":"I. Gräßler, D. Roesmann, J. Pottebaum, Zeitschrift für wirtschaftlichen Fabrikbetrieb 118 (2023) 149–152.","bibtex":"@article{Gräßler_Roesmann_Pottebaum_2023, title={Human Factors in der integrierten Produktentwicklung}, volume={118}, DOI={<a href=\"https://doi.org/10.1515/zwf-2023-1029\">10.1515/zwf-2023-1029</a>}, number={3}, journal={Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Walter de Gruyter GmbH}, author={Gräßler, Iris and Roesmann, Daniel and Pottebaum, Jens}, year={2023}, pages={149–152} }","apa":"Gräßler, I., Roesmann, D., &#38; Pottebaum, J. (2023). Human Factors in der integrierten Produktentwicklung. <i>Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>, <i>118</i>(3), 149–152. <a href=\"https://doi.org/10.1515/zwf-2023-1029\">https://doi.org/10.1515/zwf-2023-1029</a>","ama":"Gräßler I, Roesmann D, Pottebaum J. Human Factors in der integrierten Produktentwicklung. <i>Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>. 2023;118(3):149-152. doi:<a href=\"https://doi.org/10.1515/zwf-2023-1029\">10.1515/zwf-2023-1029</a>","ieee":"I. Gräßler, D. Roesmann, and J. Pottebaum, “Human Factors in der integrierten Produktentwicklung,” <i>Zeitschrift für wirtschaftlichen Fabrikbetrieb</i>, vol. 118, no. 3, pp. 149–152, 2023, doi: <a href=\"https://doi.org/10.1515/zwf-2023-1029\">10.1515/zwf-2023-1029</a>.","chicago":"Gräßler, Iris, Daniel Roesmann, and Jens Pottebaum. “Human Factors in der integrierten Produktentwicklung.” <i>Zeitschrift für wirtschaftlichen Fabrikbetrieb</i> 118, no. 3 (2023): 149–52. <a href=\"https://doi.org/10.1515/zwf-2023-1029\">https://doi.org/10.1515/zwf-2023-1029</a>."},"date_updated":"2024-03-28T07:12:20Z","volume":118,"author":[{"full_name":"Gräßler, Iris","id":"47565","orcid":"0000-0001-5765-971X","last_name":"Gräßler","first_name":"Iris"},{"last_name":"Roesmann","id":"54680","full_name":"Roesmann, Daniel","first_name":"Daniel"},{"first_name":"Jens","id":"405","full_name":"Pottebaum, Jens","last_name":"Pottebaum","orcid":"http://orcid.org/0000-0001-8778-2989"}],"doi":"10.1515/zwf-2023-1029"},{"main_file_link":[{"url":"https://www.sffsymposium.org/","open_access":"1"}],"doi":"https://doi.org/10.26153/tsw/50931","conference":{"start_date":"2023-08-14","name":"34th Annual International Solid Freeform Fabrication Symposium","location":"Austin","end_date":"2023-08-16"},"author":[{"first_name":"Ivo","last_name":"Kletetzka","full_name":"Kletetzka, Ivo","id":"50769"},{"id":"72307","full_name":"Neitzel, Fabian","last_name":"Neitzel","orcid":"0009-0004-8412-3645 ","first_name":"Fabian"},{"first_name":"Hans-Joachim","full_name":"Schmid, Hans-Joachim","id":"464","orcid":"000-0001-8590-1921","last_name":"Schmid"}],"date_updated":"2024-04-02T12:46:08Z","oa":"1","citation":{"ieee":"I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, Austin, 2023, doi: <a href=\"https://doi.org/10.26153/tsw/50931\">https://doi.org/10.26153/tsw/50931</a>.","chicago":"Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023. <a href=\"https://doi.org/10.26153/tsw/50931\">https://doi.org/10.26153/tsw/50931</a>.","ama":"Kletetzka I, Neitzel F, Schmid H-J. Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In: Beaman J, ed. <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>. ; 2023. doi:<a href=\"https://doi.org/10.26153/tsw/50931\">https://doi.org/10.26153/tsw/50931</a>","apa":"Kletetzka, I., Neitzel, F., &#38; Schmid, H.-J. (2023). Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In J. Beaman (Ed.), <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>. <a href=\"https://doi.org/10.26153/tsw/50931\">https://doi.org/10.26153/tsw/50931</a>","mla":"Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, edited by Joseph Beaman, 2023, doi:<a href=\"https://doi.org/10.26153/tsw/50931\">https://doi.org/10.26153/tsw/50931</a>.","short":"I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.","bibtex":"@inproceedings{Kletetzka_Neitzel_Schmid_2023, place={Laboratory for Freeform Fabrication and University of Texas, Austin}, title={Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering}, DOI={<a href=\"https://doi.org/10.26153/tsw/50931\">https://doi.org/10.26153/tsw/50931</a>}, booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium}, author={Kletetzka, Ivo and Neitzel, Fabian and Schmid, Hans-Joachim}, editor={Beaman, Joseph}, year={2023} }"},"place":"Laboratory for Freeform Fabrication and University of Texas, Austin","publication_status":"published","user_id":"50769","department":[{"_id":"150"},{"_id":"219"},{"_id":"624"},{"_id":"9"}],"_id":"51218","status":"public","editor":[{"full_name":"Beaman, Joseph","last_name":"Beaman","first_name":"Joseph"}],"type":"conference","title":"Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering","date_created":"2024-02-07T13:59:25Z","year":"2023","quality_controlled":"1","language":[{"iso":"eng"}],"keyword":["Additive Manufacturing","Laser Sintering","Filled Materials","Composites","Polyamide 613"],"abstract":[{"lang":"eng","text":"Polymer composites represent the industry standard in injection molding for the production of plastic components with increased requirements in terms of heat resistance and stiffness. In the field of laser sintering (LS), these materials are less common so far. In order to extend the available material variety for the LS process, new ceramic-filled Polyamide 613 powders are investigated within the scope of this work. Here, the resulting properties from two different powder production methods are compared. One filled powder is produced by dry blending and the other powder with the same filler and filling ratio is produced by encapsulating the filler particles inside the polymer particles within the dissolution-precipitation process. It was found that encapsulating the filler particles can provide certain benefits for the processability, for example an improved powder flowability or better filler dispersion. However, encapsulating the filler also alters the thermal properties of the precipitated powder. "}],"publication":"Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium"},{"author":[{"last_name":"Neitzel","orcid":"0009-0004-8412-3645 ","id":"72307","full_name":"Neitzel, Fabian","first_name":"Fabian"},{"first_name":"Ivo","id":"50769","full_name":"Kletetzka, Ivo","last_name":"Kletetzka"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"date_updated":"2024-04-02T12:43:51Z","oa":"1","doi":"https://doi.org/10.26153/tsw/50926","conference":{"start_date":"2023-08-14","name":"34th Annual International Solid Freeform Fabrication Symposium","location":"Austin","end_date":"2023-08-16"},"main_file_link":[{"url":"https://www.sffsymposium.org/","open_access":"1"}],"publication_status":"published","citation":{"short":"F. Neitzel, I. Kletetzka, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.","bibtex":"@inproceedings{Neitzel_Kletetzka_Schmid_2023, place={Laboratory for Freeform Fabrication and University of Texas, Austin}, title={Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis}, DOI={<a href=\"https://doi.org/10.26153/tsw/50926\">https://doi.org/10.26153/tsw/50926</a>}, booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium}, author={Neitzel, Fabian and Kletetzka, Ivo and Schmid, Hans-Joachim}, editor={Beaman, Joseph}, year={2023} }","mla":"Neitzel, Fabian, et al. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.” <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, edited by Joseph Beaman, 2023, doi:<a href=\"https://doi.org/10.26153/tsw/50926\">https://doi.org/10.26153/tsw/50926</a>.","apa":"Neitzel, F., Kletetzka, I., &#38; Schmid, H.-J. (2023). Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis. In J. Beaman (Ed.), <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>. <a href=\"https://doi.org/10.26153/tsw/50926\">https://doi.org/10.26153/tsw/50926</a>","ama":"Neitzel F, Kletetzka I, Schmid H-J. Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis. In: Beaman J, ed. <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>. ; 2023. doi:<a href=\"https://doi.org/10.26153/tsw/50926\">https://doi.org/10.26153/tsw/50926</a>","chicago":"Neitzel, Fabian, Ivo Kletetzka, and Hans-Joachim Schmid. “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis.” In <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, edited by Joseph Beaman. Laboratory for Freeform Fabrication and University of Texas, Austin, 2023. <a href=\"https://doi.org/10.26153/tsw/50926\">https://doi.org/10.26153/tsw/50926</a>.","ieee":"F. Neitzel, I. Kletetzka, and H.-J. Schmid, “Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis,” in <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, Austin, 2023, doi: <a href=\"https://doi.org/10.26153/tsw/50926\">https://doi.org/10.26153/tsw/50926</a>."},"place":"Laboratory for Freeform Fabrication and University of Texas, Austin","department":[{"_id":"150"},{"_id":"219"},{"_id":"624"},{"_id":"9"}],"user_id":"72307","_id":"46862","type":"conference","status":"public","editor":[{"last_name":"Beaman","full_name":"Beaman, Joseph","first_name":"Joseph"}],"date_created":"2023-09-07T12:11:51Z","title":"Halogen-Free Flame Retardant Powder Materials for Laser Sintering: Evaluation and Process Stability Analysis","quality_controlled":"1","year":"2023","language":[{"iso":"eng"}],"keyword":["Additive Manufacturing","Laser Sintering","Flame Retardant","Polyamide 12"],"publication":"Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium","abstract":[{"text":"The high flammability of components manufactured by laser sintering (LS) using standard polyamide 12 (PA12) powder still severely restricts their use in industries such as electronics, aviation, and transportation. A key factor for the further establishment of LS is the expansion of the material portfolio with, for example, refreshable and halogen-free flame-retardant (FR) powder materials. Accordingly, various halogen-free FRs are investigated in this work and evaluated with respect to their use in LS. First, their decomposition behavior and mode of action are examined. Subsequently, the additives are dry blended with PA12 to investigate properties relevant for LS, such as particle morphology, thermal behavior and melt viscosity. Afterwards, test specimens for UL94 vertical flame-retardancy tests are produced by processing the dry blends on an EOS P3 LS system. Finally, the process stability of the process-aged powder blends is investigated by again examining the thermal behavior and melt viscosity.","lang":"eng"}]},{"type":"conference","status":"public","user_id":"45673","department":[{"_id":"143"},{"_id":"630"}],"project":[{"_id":"130","name":"TRR 285: TRR 285","grant_number":"418701707"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"143","name":"TRR 285 – B04: TRR 285 - Subproject B04"}],"_id":"51739","language":[{"iso":"ger"}],"publication_status":"published","citation":{"apa":"Weiß, D., Duffe, T., Buczek, M., Kullmer, G., &#38; Schramm, B. (2023). <i>Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss</i>. Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin. <a href=\"https://doi.org/10.48447/WP-2023-244\">https://doi.org/10.48447/WP-2023-244</a>","short":"D. Weiß, T. Duffe, M. Buczek, G. Kullmer, B. Schramm, in: Deutscher Verband für Materialforschung und -prüfung e.V., 2023.","mla":"Weiß, Deborah, et al. <i>Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss</i>. Deutscher Verband für Materialforschung und -prüfung e.V., 2023, doi:<a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>.","bibtex":"@inproceedings{Weiß_Duffe_Buczek_Kullmer_Schramm_2023, title={Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss}, DOI={<a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>}, publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Weiß, Deborah and Duffe, Tobias and Buczek, Moritz and Kullmer, Gunter and Schramm, Britta}, year={2023} }","ama":"Weiß D, Duffe T, Buczek M, Kullmer G, Schramm B. Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss. In: Deutscher Verband für Materialforschung und -prüfung e.V.; 2023. doi:<a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>","chicago":"Weiß, Deborah, Tobias Duffe, Moritz Buczek, Gunter Kullmer, and Britta Schramm. “Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss.” Deutscher Verband für Materialforschung und -prüfung e.V., 2023. <a href=\"https://doi.org/10.48447/WP-2023-244\">https://doi.org/10.48447/WP-2023-244</a>.","ieee":"D. Weiß, T. Duffe, M. Buczek, G. Kullmer, and B. Schramm, “Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss,” presented at the Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung, Berlin, 2023, doi: <a href=\"https://doi.org/10.48447/WP-2023-244\">10.48447/WP-2023-244</a>."},"year":"2023","author":[{"first_name":"Deborah","last_name":"Weiß","id":"45673","full_name":"Weiß, Deborah"},{"first_name":"Tobias","last_name":"Duffe","full_name":"Duffe, Tobias","id":"41322"},{"id":"83727","full_name":"Buczek, Moritz","last_name":"Buczek","first_name":"Moritz"},{"id":"291","full_name":"Kullmer, Gunter","last_name":"Kullmer","first_name":"Gunter"},{"first_name":"Britta","id":"4668","full_name":"Schramm, Britta","last_name":"Schramm"}],"date_created":"2024-02-22T09:54:40Z","publisher":"Deutscher Verband für Materialforschung und -prüfung e.V.","date_updated":"2024-04-10T07:08:49Z","conference":{"start_date":"2023-11-23","name":"Werkstoffprüfung 2023: Werkstoffe und Bauteile auf dem Prüfstand - Tagung","location":"Berlin","end_date":"2023-11-24"},"doi":"10.48447/WP-2023-244","title":"Bruchmechanische Untersuchung des Dualphasenstahls HCT590X unter Temperatureinfluss"},{"language":[{"iso":"eng"}],"_id":"54389","department":[{"_id":"150"}],"user_id":"38188","status":"public","type":"bachelorsthesis","title":"Entwicklung eines Verfahrens zur Probenentnahme aus einem Pulverkuchen im SLS-Prozess","date_updated":"2024-05-21T13:58:47Z","date_created":"2024-05-21T13:54:15Z","supervisor":[{"id":"38188","full_name":"Rüther, Moritz Johannes","last_name":"Rüther","first_name":"Moritz Johannes"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"author":[{"first_name":"Lorena Marie","last_name":"Bürckner","full_name":"Bürckner, Lorena Marie"}],"year":"2023","citation":{"apa":"Bürckner, L. M. (2023). <i>Entwicklung eines Verfahrens zur Probenentnahme aus einem Pulverkuchen im SLS-Prozess</i>.","mla":"Bürckner, Lorena Marie. <i>Entwicklung Eines Verfahrens Zur Probenentnahme Aus Einem Pulverkuchen Im SLS-Prozess</i>. 2023.","bibtex":"@book{Bürckner_2023, title={Entwicklung eines Verfahrens zur Probenentnahme aus einem Pulverkuchen im SLS-Prozess}, author={Bürckner, Lorena Marie}, year={2023} }","short":"L.M. Bürckner, Entwicklung Eines Verfahrens Zur Probenentnahme Aus Einem Pulverkuchen Im SLS-Prozess, 2023.","ama":"Bürckner LM. <i>Entwicklung Eines Verfahrens Zur Probenentnahme Aus Einem Pulverkuchen Im SLS-Prozess</i>.; 2023.","ieee":"L. M. Bürckner, <i>Entwicklung eines Verfahrens zur Probenentnahme aus einem Pulverkuchen im SLS-Prozess</i>. 2023.","chicago":"Bürckner, Lorena Marie. <i>Entwicklung Eines Verfahrens Zur Probenentnahme Aus Einem Pulverkuchen Im SLS-Prozess</i>, 2023."}},{"file":[{"access_level":"open_access","file_name":"2023_Tagungsband_FKF23_PottebaumEtAl.pdf","file_id":"48993","file_size":416743,"date_created":"2023-11-17T07:14:05Z","creator":"jenspo","date_updated":"2024-05-22T21:09:37Z","relation":"main_file","content_type":"application/pdf"}],"abstract":[{"lang":"ger","text":"Extremwettersituationen sind durch die Kombination von globalen und lokalen Wirkzusammenhän-gen gekennzeichnet. In der Gefahrenanalyse und -reaktion ist deshalb der Umgang mit extremen Daten erforderlich, die von heterogenen Datenquellen bezogen und mittels unterschiedlicher Ver-fahren bis hin zum maschinellen Lernen ausgewertet werden. Die Visualisierung dieser zwangsläufig unsicherheitsbehafteten Daten stellt eine Herausforderung dar. Diese wirkt umso bedeutsamer, je weniger Fachexpertise in Bereichen wie Meteorologie, Geologie oder Sensortechnik in einer Füh-rungs- oder Leitstelle eingebunden werden kann. Das Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten muss daher auf einer Bewertung der Informationsqualität von extremen Daten beruhen. Diese Bewertung ist abhängig vom Anwendungskontext in unterschiedli-chen Führungs- und Assistenzstellen sowie der verfügbaren Infrastruktur mit Geräten zur Visualisie-rung, Schnittstellen von Wetterdiensten, Sensorsysteme und Rettungsrobotik. Im Beitrag wird der Ansatz des EU-Projekts CREXDATA in Bezug auf mögliche pluviale Hochwassersituationen in Inns-bruck vorgestellt. Grundlage bildet die Kategorisierung von extremen Daten, die Schnittstellen zu Datenquellen mit globalem und lokalem Bezug sowie Anwendungsfälle für die Visualisierung von Informationen. Es werden somit Grundlagen präsentiert, die in allen Formen von geobasierten Lage- und Führungsinformationssystemen zum Einsatz kommen können."}],"publication":"Tagungsband der Fachtagung Katastrophenforschung 2023","language":[{"iso":"ger"}],"ddc":["600"],"corporate_editor":["Disaster Competence Network Austria"],"year":"2023","quality_controlled":"1","title":"Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten","date_created":"2023-09-13T00:15:48Z","status":"public","type":"conference","file_date_updated":"2024-05-22T21:09:37Z","user_id":"405","department":[{"_id":"152"}],"project":[{"name":"CREXDATA: CREXDATA: Critical Action Planning over Extreme-Scale Data","_id":"516","grant_number":"101092749"}],"_id":"46988","citation":{"bibtex":"@inproceedings{Pottebaum_Rechberger_Hieb_Gräßler_Resch_2023, place={Wien}, title={Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten}, booktitle={Tagungsband der Fachtagung Katastrophenforschung 2023}, author={Pottebaum, Jens and Rechberger, Christina and Hieb, Michael and Gräßler, Iris and Resch, Christian}, editor={Disaster Competence Network Austria}, year={2023}, pages={26–29} }","mla":"Pottebaum, Jens, et al. “Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten.” <i>Tagungsband der Fachtagung Katastrophenforschung 2023</i>, edited by Disaster Competence Network Austria, 2023, pp. 26–29.","short":"J. Pottebaum, C. Rechberger, M. Hieb, I. Gräßler, C. Resch, in: Disaster Competence Network Austria (Ed.), Tagungsband der Fachtagung Katastrophenforschung 2023, Wien, 2023, pp. 26–29.","apa":"Pottebaum, J., Rechberger, C., Hieb, M., Gräßler, I., &#38; Resch, C. (2023). Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten. In Disaster Competence Network Austria (Ed.), <i>Tagungsband der Fachtagung Katastrophenforschung 2023</i> (pp. 26–29).","chicago":"Pottebaum, Jens, Christina Rechberger, Michael Hieb, Iris Gräßler, and Christian Resch. “Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten.” In <i>Tagungsband der Fachtagung Katastrophenforschung 2023</i>, edited by Disaster Competence Network Austria, 26–29. Wien, 2023.","ieee":"J. Pottebaum, C. Rechberger, M. Hieb, I. Gräßler, and C. Resch, “Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten,” in <i>Tagungsband der Fachtagung Katastrophenforschung 2023</i>, Leoben, 2023, pp. 26–29.","ama":"Pottebaum J, Rechberger C, Hieb M, Gräßler I, Resch C. Extremwettersituationen in alpinen Gebieten: Management kritischer Situationen in Echtzeit bei extremen und komplexen Daten. In: Disaster Competence Network Austria, ed. <i>Tagungsband der Fachtagung Katastrophenforschung 2023</i>. ; 2023:26-29."},"page":"26-29","place":"Wien","publication_status":"published","has_accepted_license":"1","publication_identifier":{"isbn":["978-3-900397-11-1"]},"conference":{"location":"Leoben","end_date":"2023-09-12","start_date":"2023-09-11","name":"Fachtagung Katastrophenforschung"},"author":[{"first_name":"Jens","orcid":"http://orcid.org/0000-0001-8778-2989","last_name":"Pottebaum","id":"405","full_name":"Pottebaum, Jens"},{"full_name":"Rechberger, Christina","last_name":"Rechberger","first_name":"Christina"},{"last_name":"Hieb","id":"72252","full_name":"Hieb, Michael","first_name":"Michael"},{"full_name":"Gräßler, Iris","id":"47565","last_name":"Gräßler","orcid":"0000-0001-5765-971X","first_name":"Iris"},{"first_name":"Christian","full_name":"Resch, Christian","last_name":"Resch"}],"date_updated":"2024-05-22T21:09:37Z","oa":"1"},{"status":"public","type":"conference","publication":"23. Kolloquium: Gemeinsame Forschung in der Klebtechnik","language":[{"iso":"eng"}],"user_id":"41235","department":[{"_id":"157"}],"_id":"42643","citation":{"apa":"Chudalla, N., Meschut, G., Schneider, M., &#38; Smart, D. (2023). Systematisierung einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen. <i>23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Frankfurt a. M.","mla":"Chudalla, Nick, et al. “Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen.” <i>23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, 2023.","short":"N. Chudalla, G. Meschut, M. Schneider, D. Smart, in: 23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2023.","bibtex":"@inproceedings{Chudalla_Meschut_Schneider_Smart_2023, title={Systematisierung einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen}, booktitle={23. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Chudalla, Nick and Meschut, Gerson and Schneider, Miriam  and Smart, Dominic }, year={2023} }","ama":"Chudalla N, Meschut G, Schneider M, Smart D. Systematisierung einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen. In: <i>23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>. ; 2023.","chicago":"Chudalla, Nick, Gerson Meschut, Miriam  Schneider, and Dominic  Smart. “Systematisierung Einer Rechnergestützten Auswertemethode Zur Versagensanalyse Geklebter Verbindungen.” In <i>23. Kolloquium: Gemeinsame Forschung in Der Klebtechnik</i>, 2023.","ieee":"N. Chudalla, G. Meschut, M. Schneider, and D. Smart, “Systematisierung einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen,” presented at the 23. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Frankfurt a. M., 2023."},"year":"2023","conference":{"end_date":"2023-03-01","location":"Frankfurt a. M.","name":"23. Kolloquium: Gemeinsame Forschung in der Klebtechnik","start_date":"2023-02-28"},"title":"Systematisierung einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen","author":[{"id":"41235","full_name":"Chudalla, Nick","last_name":"Chudalla","first_name":"Nick"},{"orcid":"0000-0002-2763-1246","last_name":"Meschut","id":"32056","full_name":"Meschut, Gerson","first_name":"Gerson"},{"last_name":"Schneider","full_name":"Schneider, Miriam ","first_name":"Miriam "},{"last_name":"Smart","full_name":"Smart, Dominic ","first_name":"Dominic "}],"date_created":"2023-03-02T08:09:02Z","date_updated":"2024-05-23T05:57:11Z"},{"title":"Einfluss der Radhubkinematik auf den Reifenverschleiß","conference":{"start_date":"2023-11-08","name":"20. VDI Fachtagung Reifen - Fahrwerk - Fahrbahn","location":"Karlsruhe","end_date":"2023-11-09"},"publisher":"VDI Verlag GmbH","date_updated":"2024-05-27T07:48:26Z","volume":2425,"date_created":"2024-02-13T11:29:58Z","author":[{"full_name":"Schütte, Jan","id":"22109","last_name":"Schütte","orcid":"0000-0001-9025-9742","first_name":"Jan"},{"last_name":"Sextro","id":"21220","full_name":"Sextro, Walter","first_name":"Walter"}],"year":"2023","intvolume":"      2425","page":"165-180","citation":{"ama":"Schütte J, Sextro W. Einfluss der Radhubkinematik auf den Reifenverschleiß. In: <i>20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn</i>. Vol 2425. VDI-Berichte. VDI Verlag GmbH; 2023:165-180.","ieee":"J. Schütte and W. Sextro, “Einfluss der Radhubkinematik auf den Reifenverschleiß,” in <i>20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn</i>, Karlsruhe, 2023, vol. 2425, pp. 165–180.","chicago":"Schütte, Jan, and Walter Sextro. “Einfluss der Radhubkinematik auf den Reifenverschleiß.” In <i>20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn</i>, 2425:165–80. VDI-Berichte. VDI Verlag GmbH, 2023.","apa":"Schütte, J., &#38; Sextro, W. (2023). Einfluss der Radhubkinematik auf den Reifenverschleiß. <i>20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn</i>, <i>2425</i>, 165–180.","mla":"Schütte, Jan, and Walter Sextro. “Einfluss der Radhubkinematik auf den Reifenverschleiß.” <i>20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn</i>, vol. 2425, VDI Verlag GmbH, 2023, pp. 165–80.","bibtex":"@inproceedings{Schütte_Sextro_2023, series={VDI-Berichte}, title={Einfluss der Radhubkinematik auf den Reifenverschleiß}, volume={2425}, booktitle={20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn}, publisher={VDI Verlag GmbH}, author={Schütte, Jan and Sextro, Walter}, year={2023}, pages={165–180}, collection={VDI-Berichte} }","short":"J. Schütte, W. Sextro, in: 20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn, VDI Verlag GmbH, 2023, pp. 165–180."},"publication_identifier":{"unknown":["978-3-18-092425-0"]},"publication_status":"published","language":[{"iso":"ger"}],"_id":"51338","department":[{"_id":"151"}],"user_id":"22109","series_title":"VDI-Berichte","status":"public","publication":"20. VDI-Fachtagung Reifen - Fahrwerk - Fahrbahn","type":"conference"}]