---
_id: '63512'
abstract:
- lang: eng
text: "The state of the art shows that PBF-LB/M offers great potential for pressure-loaded
parts, with significant weight reductions and simultaneous optimization of flow
resistance. This study is aimed at applying existing calculation methods for pressure-loaded
parts to additively manufactured pipe structures, considering the two materials
EN AC-43000 (3.2381, AlSi10Mg) and AISI 316L (1.4404, X2CrNiMo17-12-2). For this
purpose, systematic tensile tests are carried out for both materials. In addition,
a statistical evaluation is performed to determine the design-relevant strength
characteristics with a survival probability Ps of 97.5 % for both materials in
the as-built and heat-treated condition.\r\nPipe specimens are manufactured, half
of which are heat treated, geometrically measured and then subjected to a burst
pressure test to experimentally determine the failure-critical internal pressure.
These results are compared with calculated burst pressures. The calculations are
based on the application-relevant methods identified in this study, considering
the strength values determined for the respective material condition. This comparison
is used to assess the suitability of the calculation methods for additively manufactured
pipe structures, based on the materials investigated."
article_number: '105753'
author:
- first_name: Thorsten
full_name: Koers, Thorsten
id: '38077'
last_name: Koers
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Christian
full_name: Bödger, Christian
id: '93904'
last_name: Bödger
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Koers T, Magyar B, Bödger C, Tröster T. Analytical and experimental determination
of the failure-critical pressure of pipe structures manufactured by PBF-LB/M.
International Journal of Pressure Vessels and Piping. Published online
2026. doi:10.1016/j.ijpvp.2026.105753
apa: Koers, T., Magyar, B., Bödger, C., & Tröster, T. (2026). Analytical and
experimental determination of the failure-critical pressure of pipe structures
manufactured by PBF-LB/M. International Journal of Pressure Vessels and Piping,
Article 105753. https://doi.org/10.1016/j.ijpvp.2026.105753
bibtex: '@article{Koers_Magyar_Bödger_Tröster_2026, title={Analytical and experimental
determination of the failure-critical pressure of pipe structures manufactured
by PBF-LB/M}, DOI={10.1016/j.ijpvp.2026.105753},
number={105753}, journal={International Journal of Pressure Vessels and Piping},
publisher={Elsevier BV}, author={Koers, Thorsten and Magyar, Balázs and Bödger,
Christian and Tröster, Thomas}, year={2026} }'
chicago: Koers, Thorsten, Balázs Magyar, Christian Bödger, and Thomas Tröster. “Analytical
and Experimental Determination of the Failure-Critical Pressure of Pipe Structures
Manufactured by PBF-LB/M.” International Journal of Pressure Vessels and Piping,
2026. https://doi.org/10.1016/j.ijpvp.2026.105753.
ieee: 'T. Koers, B. Magyar, C. Bödger, and T. Tröster, “Analytical and experimental
determination of the failure-critical pressure of pipe structures manufactured
by PBF-LB/M,” International Journal of Pressure Vessels and Piping, Art.
no. 105753, 2026, doi: 10.1016/j.ijpvp.2026.105753.'
mla: Koers, Thorsten, et al. “Analytical and Experimental Determination of the Failure-Critical
Pressure of Pipe Structures Manufactured by PBF-LB/M.” International Journal
of Pressure Vessels and Piping, 105753, Elsevier BV, 2026, doi:10.1016/j.ijpvp.2026.105753.
short: T. Koers, B. Magyar, C. Bödger, T. Tröster, International Journal of Pressure
Vessels and Piping (2026).
date_created: 2026-01-07T08:39:04Z
date_updated: 2026-01-14T11:56:01Z
department:
- _id: '146'
- _id: '9'
- _id: '624'
- _id: '149'
- _id: '321'
doi: 10.1016/j.ijpvp.2026.105753
keyword:
- PBF-LB/M
- Pipe structures
- Strength assessment
- Burst pressure test
- Geometrical deviations
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1016/j.ijpvp.2026.105753
oa: '1'
publication: International Journal of Pressure Vessels and Piping
publication_identifier:
issn:
- 0308-0161
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Analytical and experimental determination of the failure-critical pressure
of pipe structures manufactured by PBF-LB/M
type: journal_article
user_id: '97759'
year: '2026'
...
---
_id: '63676'
abstract:
- lang: eng
text: "\r\n Purpose\r\n The
purpose of this paper is to develop new methods of error representation to improve
the accuracy and numerical efficiency of a posteriori and goal-oriented adaptive
framework of elastoplasticity with Prandtl–Reuss type material laws.\r\n
\ \r\n \r\n Design/methodology/approach\r\n
\ To obtain new methods of error representation for
a posteriori and goal-oriented error estimators, weak forms of primal and dual
problems are investigated starting with the initial boundary value problem (IBVP).
Then, we approximate both problems using temporal discretization. Additionally,
we introduce a secant form considering the nonlinearity of elasto-plastic constitutive
equations, which is approximated by a tangent form. Finally, we obtain numerical
primal and dual solutions and their corresponding error approximations of discretized
primal and dual problems, allowing to build several goal-oriented a posteriori
error estimators on temporal and spatial adaptive refinement by inserting primal
solutions, dual solutions and their error approximations as arguments in residuals
of both weak forms as well as in the secant form of the bilinear residual.\r\n
\ \r\n \r\n Findings\r\n
\ An elasto-plastic material is investigated in a framework
of goal-oriented error estimator by using separately several methods of error
representation to deal with either temporal or spatial adaptive refinement, as
well as with both refinements leading to an effective reduction of computational
effort. Specifically, new error representations based on goal-oriented error estimators
are presented and obtained from primal and dual residuals, which use only primal
solutions or only dual solutions or a combination of primal and dual solutions
as arguments. Error representations obtained from primal residuals and evaluated
using only primal arguments do not require the formulation of a dual problem.\r\n
\ \r\n \r\n Research
limitations/implications\r\n The effectiveness
of the different proposed methods is illustrated by an example of a perforated
sheet for adaptive spatial refinement where new mesh adaptation methods of error
representation are compared against existing mesh adaptation methods such as uniform
mesh refinement, mesh refinement based on gradient indicators and adjoint-based
methods in literature. The framework generates a balanced mesh consisting of fine,
medium and coarse elements for accurate results, avoiding a numerically costly
simulation with only fine elements.\r\n \r\n
\ \r\n Originality/value\r\n
\ All new proposed methods of error representation successfully
estimate actual errors during mesh adaptivity. Furthermore, the proposed methods
of error representation allow us to obtain significant reduction and equidistribution
of spatial error at the end of the mesh adaptivity process. Their application
to a framework of goal-oriented error estimation due to time and mesh adaptivity
remains an open issue.\r\n "
author:
- first_name: Arnold
full_name: Tchomgue Simeu, Arnold
id: '83075'
last_name: Tchomgue Simeu
- first_name: Ismail
full_name: Caylak, Ismail
id: '75'
last_name: Caylak
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
citation:
ama: Tchomgue Simeu A, Caylak I, Ostwald R. Error representations for goal-oriented
a posteriori error estimation in elasto-plasticity
with applications to mesh adaptivity. Engineering Computations. Published
online 2026:1-40. doi:10.1108/ec-12-2023-0975
apa: Tchomgue Simeu, A., Caylak, I., & Ostwald, R. (2026). Error representations
for goal-oriented a posteriori error
estimation in elasto-plasticity with applications to mesh adaptivity. Engineering
Computations, 1–40. https://doi.org/10.1108/ec-12-2023-0975
bibtex: '@article{Tchomgue Simeu_Caylak_Ostwald_2026, title={Error representations
for goal-oriented a posteriori error
estimation in elasto-plasticity with applications to mesh adaptivity}, DOI={10.1108/ec-12-2023-0975}, journal={Engineering
Computations}, publisher={Emerald}, author={Tchomgue Simeu, Arnold and Caylak,
Ismail and Ostwald, Richard}, year={2026}, pages={1–40} }'
chicago: Tchomgue Simeu, Arnold, Ismail Caylak, and Richard Ostwald. “Error Representations
for Goal-Oriented a Posteriori Error
Estimation in Elasto-Plasticity with Applications to Mesh Adaptivity.” Engineering
Computations, 2026, 1–40. https://doi.org/10.1108/ec-12-2023-0975.
ieee: 'A. Tchomgue Simeu, I. Caylak, and R. Ostwald, “Error representations for
goal-oriented a posteriori error
estimation in elasto-plasticity with applications to mesh adaptivity,” Engineering
Computations, pp. 1–40, 2026, doi: 10.1108/ec-12-2023-0975.'
mla: Tchomgue Simeu, Arnold, et al. “Error Representations for Goal-Oriented
a Posteriori Error Estimation in Elasto-Plasticity
with Applications to Mesh Adaptivity.” Engineering Computations, Emerald,
2026, pp. 1–40, doi:10.1108/ec-12-2023-0975.
short: A. Tchomgue Simeu, I. Caylak, R. Ostwald, Engineering Computations (2026)
1–40.
date_created: 2026-01-21T06:49:18Z
date_updated: 2026-01-21T06:50:58Z
department:
- _id: '9'
- _id: '952'
- _id: '321'
doi: 10.1108/ec-12-2023-0975
language:
- iso: eng
page: 1-40
publication: Engineering Computations
publication_identifier:
issn:
- 0264-4401
- 1758-7077
publication_status: published
publisher: Emerald
quality_controlled: '1'
status: public
title: Error representations for goal-oriented a posteriori error
estimation in elasto-plasticity with applications to mesh adaptivity
type: journal_article
user_id: '85414'
year: '2026'
...
---
_id: '63720'
abstract:
- lang: eng
text: The aging behavior of closed-cell polyurethane (PUR) foam, a material widely
used in household refrigeration, is studied by examining the variation of cell
gas composition and thermal conductivity over time. Aging is primarily driven
by gas permeation, wherein the initially present cell gases carbon dioxide and
cyclopentane are progressively replaced by nitrogen and oxygen from the ambient,
resulting in an increased thermal conductivity and reduced insulation performance.
The cell gas composition is measured over 1400 days employing gas chromatography,
and the thermal conductivity of the foam is measured over 190 days. Morphological
foam characteristics, such as average cell diameter, are determined via scanning
electron microscopy and barrier measurements are performed to estimate the effective
diffusion coefficient of oxygen. To simulate the aging process, one-dimensional
and three-dimensional models are developed for both diffusive mass transfer as
well as heat transfer. The present model for the thermal conductivity explicitly
accounts for condensation effects, i.e. partial condensation of cyclopentane and
carbon dioxide occurring at around 12°C, which significantly influences the insulation
behavior of the foam. Sensitivity analyses indicate that an initial cell gas pressure
of approximately 0.7 bar yields results that closely coincide with the experimental
measurements, where the three-dimensional model demonstrates better accuracy.
These measurements and simulations provide valuable insights for evaluating and
predicting the long-term degradation of the insulation performance of PUR foams.
article_number: '129850'
article_type: original
author:
- first_name: Daniel
full_name: Schumacher, Daniel
last_name: Schumacher
- first_name: Gabriela
full_name: Guevara-Carrion, Gabriela
last_name: Guevara-Carrion
- first_name: Tina
full_name: Kasper, Tina
id: '94562'
last_name: Kasper
orcid: '0000-0003-3993-5316 '
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Andreas
full_name: Elsner, Andreas
id: '16124'
last_name: Elsner
- first_name: Bettina
full_name: Peters, Bettina
id: '62920'
last_name: Peters
- first_name: Wenke
full_name: Wollny, Wenke
last_name: Wollny
- first_name: Marcus
full_name: Bluemel, Marcus
last_name: Bluemel
- first_name: Heike
full_name: Hoelscher, Heike
last_name: Hoelscher
- first_name: Nicola
full_name: Brzoska-Steinhaus, Nicola
last_name: Brzoska-Steinhaus
- first_name: Klaus
full_name: Heil, Klaus
last_name: Heil
- first_name: Lukas
full_name: Schleelein, Lukas
last_name: Schleelein
- first_name: Wolfgang
full_name: Becker, Wolfgang
last_name: Becker
- first_name: Ulrich
full_name: Gries, Ulrich
last_name: Gries
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: 'Schumacher D, Guevara-Carrion G, Kasper T, et al. Aging of polyurethane foam:
Experimental analysis and modeling of cell gas composition and thermal conductivity.
Applied Thermal Engineering. 2026;289. doi:10.1016/j.applthermaleng.2026.129850'
apa: 'Schumacher, D., Guevara-Carrion, G., Kasper, T., Paul, A., Elsner, A., Peters,
B., Wollny, W., Bluemel, M., Hoelscher, H., Brzoska-Steinhaus, N., Heil, K., Schleelein,
L., Becker, W., Gries, U., & Vrabec, J. (2026). Aging of polyurethane foam:
Experimental analysis and modeling of cell gas composition and thermal conductivity.
Applied Thermal Engineering, 289, Article 129850. https://doi.org/10.1016/j.applthermaleng.2026.129850'
bibtex: '@article{Schumacher_Guevara-Carrion_Kasper_Paul_Elsner_Peters_Wollny_Bluemel_Hoelscher_Brzoska-Steinhaus_et
al._2026, title={Aging of polyurethane foam: Experimental analysis and modeling
of cell gas composition and thermal conductivity}, volume={289}, DOI={10.1016/j.applthermaleng.2026.129850},
number={129850}, journal={Applied Thermal Engineering}, publisher={Elsevier BV},
author={Schumacher, Daniel and Guevara-Carrion, Gabriela and Kasper, Tina and
Paul, Andreas and Elsner, Andreas and Peters, Bettina and Wollny, Wenke and Bluemel,
Marcus and Hoelscher, Heike and Brzoska-Steinhaus, Nicola and et al.}, year={2026}
}'
chicago: 'Schumacher, Daniel, Gabriela Guevara-Carrion, Tina Kasper, Andreas Paul,
Andreas Elsner, Bettina Peters, Wenke Wollny, et al. “Aging of Polyurethane Foam:
Experimental Analysis and Modeling of Cell Gas Composition and Thermal Conductivity.”
Applied Thermal Engineering 289 (2026). https://doi.org/10.1016/j.applthermaleng.2026.129850.'
ieee: 'D. Schumacher et al., “Aging of polyurethane foam: Experimental analysis
and modeling of cell gas composition and thermal conductivity,” Applied Thermal
Engineering, vol. 289, Art. no. 129850, 2026, doi: 10.1016/j.applthermaleng.2026.129850.'
mla: 'Schumacher, Daniel, et al. “Aging of Polyurethane Foam: Experimental Analysis
and Modeling of Cell Gas Composition and Thermal Conductivity.” Applied Thermal
Engineering, vol. 289, 129850, Elsevier BV, 2026, doi:10.1016/j.applthermaleng.2026.129850.'
short: D. Schumacher, G. Guevara-Carrion, T. Kasper, A. Paul, A. Elsner, B. Peters,
W. Wollny, M. Bluemel, H. Hoelscher, N. Brzoska-Steinhaus, K. Heil, L. Schleelein,
W. Becker, U. Gries, J. Vrabec, Applied Thermal Engineering 289 (2026).
date_created: 2026-01-23T12:48:07Z
date_updated: 2026-01-23T12:53:26Z
department:
- _id: '728'
doi: 10.1016/j.applthermaleng.2026.129850
intvolume: ' 289'
keyword:
- Polyurethane
- Foam
- Gas permeation
- Diffusion models
- Thermal conductivity
- Condensation
- Gas chromatography
- Scanning electron microscopy
language:
- iso: eng
publication: Applied Thermal Engineering
publication_identifier:
issn:
- 1359-4311
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Aging of polyurethane foam: Experimental analysis and modeling of cell gas
composition and thermal conductivity'
type: journal_article
user_id: '7828'
volume: 289
year: '2026'
...
---
_id: '63784'
author:
- first_name: Dorte
full_name: Trienens, Dorte
id: '44116'
last_name: Trienens
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Trienens D, Brüning F, Schöppner V. Wo Forschung, KI und Praxis aufeinandertreffen.
kunststoffland NRW report. 2026;03-2025.
apa: Trienens, D., Brüning, F., & Schöppner, V. (2026). Wo Forschung, KI und
Praxis aufeinandertreffen. Kunststoffland NRW Report, 03–2025.
bibtex: '@article{Trienens_Brüning_Schöppner_2026, title={Wo Forschung, KI und Praxis
aufeinandertreffen}, volume={03–2025}, journal={kunststoffland NRW report}, author={Trienens,
Dorte and Brüning, Florian and Schöppner, Volker}, year={2026} }'
chicago: Trienens, Dorte, Florian Brüning, and Volker Schöppner. “Wo Forschung,
KI Und Praxis Aufeinandertreffen.” Kunststoffland NRW Report 03–2025 (2026).
ieee: D. Trienens, F. Brüning, and V. Schöppner, “Wo Forschung, KI und Praxis aufeinandertreffen,”
kunststoffland NRW report, vol. 03–2025, 2026.
mla: Trienens, Dorte, et al. “Wo Forschung, KI Und Praxis Aufeinandertreffen.” Kunststoffland
NRW Report, vol. 03–2025, 2026.
short: D. Trienens, F. Brüning, V. Schöppner, Kunststoffland NRW Report 03–2025
(2026).
date_created: 2026-01-28T10:09:30Z
date_updated: 2026-01-28T10:09:53Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: kunststoffland NRW report
status: public
title: Wo Forschung, KI und Praxis aufeinandertreffen
type: journal_article
user_id: '44116'
volume: 03-2025
year: '2026'
...
---
_id: '64131'
author:
- first_name: Lucas
full_name: Hermelingmeier, Lucas
id: '58649'
last_name: Hermelingmeier
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Matthias
full_name: Korten, Matthias
last_name: Korten
- first_name: Peter
full_name: Urban, Peter
last_name: Urban
- first_name: Raphael
full_name: Marquardt, Raphael
last_name: Marquardt
- first_name: Michael
full_name: Rethmeier, Michael
last_name: Rethmeier
citation:
ama: 'Hermelingmeier L, Teutenberg D, Meschut G, et al. Konzeptentwicklung für eine
stahlintenisve zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge.
In: DECHEMA, ed. ; 2026.'
apa: Hermelingmeier, L., Teutenberg, D., Meschut, G., Korten, M., Urban, P., Marquardt,
R., & Rethmeier, M. (2026). Konzeptentwicklung für eine stahlintenisve
zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge (DECHEMA,
Ed.).
bibtex: '@inproceedings{Hermelingmeier_Teutenberg_Meschut_Korten_Urban_Marquardt_Rethmeier_2026,
title={Konzeptentwicklung für eine stahlintenisve zirkuläre und modulare Bauweise
elektrisch angetriebener Fahrzeuge}, author={Hermelingmeier, Lucas and Teutenberg,
Dominik and Meschut, Gerson and Korten, Matthias and Urban, Peter and Marquardt,
Raphael and Rethmeier, Michael}, editor={DECHEMA}, year={2026} }'
chicago: Hermelingmeier, Lucas, Dominik Teutenberg, Gerson Meschut, Matthias Korten,
Peter Urban, Raphael Marquardt, and Michael Rethmeier. “Konzeptentwicklung für
eine stahlintenisve zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge.”
edited by DECHEMA, 2026.
ieee: L. Hermelingmeier et al., “Konzeptentwicklung für eine stahlintenisve
zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge,” Köln, 2026.
mla: Hermelingmeier, Lucas, et al. Konzeptentwicklung für eine stahlintenisve
zirkuläre und modulare Bauweise elektrisch angetriebener Fahrzeuge. Edited
by DECHEMA, 2026.
short: 'L. Hermelingmeier, D. Teutenberg, G. Meschut, M. Korten, P. Urban, R. Marquardt,
M. Rethmeier, in: DECHEMA (Ed.), 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-02-12T11:44:34Z
date_updated: 2026-02-12T11:48:18Z
department:
- _id: '157'
language:
- iso: ger
status: public
title: Konzeptentwicklung für eine stahlintenisve zirkuläre und modulare Bauweise
elektrisch angetriebener Fahrzeuge
type: conference_abstract
user_id: '58649'
year: '2026'
...
---
_id: '64158'
abstract:
- lang: eng
text: "ABSTRACT\r\n \r\n Electrification
offers a promising route to reduce CO\r\n 2\r\n
\ emissions in the chemical sector. In distillation, heat pump
integration such as mechanical vapor recompression (MVR) can replace fossil‐based
utilities, but column parameters like pressure drop should be accurately considered
when assessing integration potential. This work discusses the effect of feed preheating
and column pressure drop on MVR integration potential. The two binary separation
tasks, methanol–water and benzene–toluene, are analyzed to identify energetically
optimal preheater and MVR design. In addition, MVR integration in a bioethanol
vacuum distillation sequence is evaluated for utility demand, CO\r\n 2\r\n
\ emissions, and economic feasibility under varying pressure
drops, preheating configurations, and cost and emission scenarios.\r\n "
article_number: cite.70074
author:
- first_name: Thorben
full_name: Hochhaus, Thorben
last_name: Hochhaus
- first_name: Sebastian
full_name: Siepmann, Sebastian
last_name: Siepmann
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Hochhaus T, Siepmann S, Grünewald M, Riese J. Impact of Distillation Column
Design on Potential for the Integration of Mechanical Vapor Recompression. Chemie
Ingenieur Technik. Published online 2026. doi:10.1002/cite.70074
apa: Hochhaus, T., Siepmann, S., Grünewald, M., & Riese, J. (2026). Impact of
Distillation Column Design on Potential for the Integration of Mechanical Vapor
Recompression. Chemie Ingenieur Technik, Article cite. 70074. https://doi.org/10.1002/cite.70074
bibtex: '@article{Hochhaus_Siepmann_Grünewald_Riese_2026, title={Impact of Distillation
Column Design on Potential for the Integration of Mechanical Vapor Recompression},
DOI={10.1002/cite.70074}, number={cite.
70074}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Hochhaus,
Thorben and Siepmann, Sebastian and Grünewald, Marcus and Riese, Julia}, year={2026}
}'
chicago: Hochhaus, Thorben, Sebastian Siepmann, Marcus Grünewald, and Julia Riese.
“Impact of Distillation Column Design on Potential for the Integration of Mechanical
Vapor Recompression.” Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70074.
ieee: 'T. Hochhaus, S. Siepmann, M. Grünewald, and J. Riese, “Impact of Distillation
Column Design on Potential for the Integration of Mechanical Vapor Recompression,”
Chemie Ingenieur Technik, Art. no. cite. 70074, 2026, doi: 10.1002/cite.70074.'
mla: Hochhaus, Thorben, et al. “Impact of Distillation Column Design on Potential
for the Integration of Mechanical Vapor Recompression.” Chemie Ingenieur Technik,
cite. 70074, Wiley, 2026, doi:10.1002/cite.70074.
short: T. Hochhaus, S. Siepmann, M. Grünewald, J. Riese, Chemie Ingenieur Technik
(2026).
date_created: 2026-02-16T07:31:17Z
date_updated: 2026-02-16T07:32:07Z
department:
- _id: '831'
doi: 10.1002/cite.70074
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Impact of Distillation Column Design on Potential for the Integration of Mechanical
Vapor Recompression
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '64187'
abstract:
- lang: eng
text: Carbon fiber-reinforced plastics (CFRPs) have become increasingly
significant in recent decades due to their remarkable mechanical properties and
lightweight nature. This study aims to advance the understanding and simulation
of CFRP behavior through the development of a hyperelastic-plastic-damage homogenization
method combined with mean-field theory. The material responses of both the fiber
and matrix are modeled using strain energy functions that account for damage evolution,
while a complete linearization of the homogenization process is derived to ensure
the consistent implementation of the Newton–Raphson iteration scheme in large
deformation simulations. The innovative aspect of this work lies in the constitutive
linearization for the hyperelastic-plastic-damage formulation within a mean-field
homogenization framework, providing an efficient Newton algorithm for modeling
the nonlinear behavior of CFRP. A failure criterion for the hyperelastic model
of fibers is introduced, along with a damage saturation variable in rate form
for the matrix, effectively capturing damage evolution. Through discrete formulations
for the homogenization, the proposed model’s capability is demonstrated via three
numerical examples and validated against experimental investigations, proving
its effectiveness and reliability in simulating CFRP damage.
article_number: '10812865261420809'
author:
- first_name: Yingjie
full_name: Zhan, Yingjie
id: '93591'
last_name: Zhan
- first_name: Ismail
full_name: Caylak, Ismail
last_name: Caylak
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Enrico
full_name: Barth, Enrico
last_name: Barth
- first_name: Eckart
full_name: Uhlmann, Eckart
last_name: Uhlmann
citation:
ama: Zhan Y, Caylak I, Ostwald R, Mahnken R, Barth E, Uhlmann E. A fully implicit
mean-field damage formulation with consistent linearization at large deformations.
Mathematics and Mechanics of Solids. Published online 2026. doi:10.1177/10812865261420809
apa: Zhan, Y., Caylak, I., Ostwald, R., Mahnken, R., Barth, E., & Uhlmann, E.
(2026). A fully implicit mean-field damage formulation with consistent linearization
at large deformations. Mathematics and Mechanics of Solids, Article 10812865261420808.
https://doi.org/10.1177/10812865261420809
bibtex: '@article{Zhan_Caylak_Ostwald_Mahnken_Barth_Uhlmann_2026, title={A fully
implicit mean-field damage formulation with consistent linearization at large
deformations}, DOI={10.1177/10812865261420809},
number={10812865261420808}, journal={Mathematics and Mechanics of Solids}, publisher={SAGE
Publications}, author={Zhan, Yingjie and Caylak, Ismail and Ostwald, Richard and
Mahnken, Rolf and Barth, Enrico and Uhlmann, Eckart}, year={2026} }'
chicago: Zhan, Yingjie, Ismail Caylak, Richard Ostwald, Rolf Mahnken, Enrico Barth,
and Eckart Uhlmann. “A Fully Implicit Mean-Field Damage Formulation with Consistent
Linearization at Large Deformations.” Mathematics and Mechanics of Solids,
2026. https://doi.org/10.1177/10812865261420809.
ieee: 'Y. Zhan, I. Caylak, R. Ostwald, R. Mahnken, E. Barth, and E. Uhlmann, “A
fully implicit mean-field damage formulation with consistent linearization at
large deformations,” Mathematics and Mechanics of Solids, Art. no. 10812865261420808,
2026, doi: 10.1177/10812865261420809.'
mla: Zhan, Yingjie, et al. “A Fully Implicit Mean-Field Damage Formulation with
Consistent Linearization at Large Deformations.” Mathematics and Mechanics
of Solids, 10812865261420808, SAGE Publications, 2026, doi:10.1177/10812865261420809.
short: Y. Zhan, I. Caylak, R. Ostwald, R. Mahnken, E. Barth, E. Uhlmann, Mathematics
and Mechanics of Solids (2026).
date_created: 2026-02-17T11:21:00Z
date_updated: 2026-02-17T11:22:49Z
department:
- _id: '9'
- _id: '952'
- _id: '321'
doi: 10.1177/10812865261420809
language:
- iso: eng
publication: Mathematics and Mechanics of Solids
publication_identifier:
issn:
- 1081-2865
- 1741-3028
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: A fully implicit mean-field damage formulation with consistent linearization
at large deformations
type: journal_article
user_id: '85414'
year: '2026'
...
---
_id: '64563'
abstract:
- lang: ger
text: Die effiziente Nutzung von Ressourcen ist in der modernen Produktentwicklung
von zentraler Bedeutung, nicht nur im Hinblick auf Materialien, sondern auch angesichts
des Fachkräftemangels. Dabei sollten menschliche Arbeitskräfte gezielt eingesetzt
und unnötige Iterationen zwischen Abteilungen vermieden werden, wobei die Kommunikation
zwischen Konstruktion und Berechnung eine entscheidende Rolle spielt. Im Rahmen
dieser Arbeit wird eine Methode entwickelt, die es Konstrukteuren ermöglicht,
mithilfe künstlicher neuronaler Netze schnell mechanisch optimierte Bauteilgeometrien
vorzuschlagen und so Korrekturschleifen zu minimieren. Hierfür wird eine Entwicklungsumgebung
analysiert, die die Integration neuronaler Netze in bestehende Konstruktions-
und Optimierungsprozesse erlaubt, einschließlich der Definition von Eingaben,
Ausgaben, Datenformaten, Datensätzen und Schnittstellen zu kommerzieller Software.
Zur Sicher-stellung der generalisierten Nutzbarkeit der Trainingsdaten werden
Bauteilgeometrien zunächst mithilfe geometrischer Primitive abstrahiert und anschließend
zu Gesamtgeometrien zusammengesetzt. Die Machbarkeitsstudie zeigt, dass mechanisch
optimierte Bauteilgeometrien auf diese Weise erfolgreich vorhergesagt werden können.
Obwohl noch gewisse Einschränkungen bestehen hinsichtlich der Schnittstellendefinition
zwischen den Primitiven oder der Umrechnung von globalen auf lokale Randbedingungen,
bietet die Methode eine solide Grundlage für weiterführende Forschungsarbeiten
in diesem Bereich.
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
citation:
ama: Ott M. Methodik zum Aufbau einer Entwicklungsumgebung für die datengetriebene
Gestaltvorhersage von Bauteilen. Vol Volume 2. Shaker Verlag; 2026.
apa: 'Ott, M. (2026). Methodik zum Aufbau einer Entwicklungsumgebung für die
datengetriebene Gestaltvorhersage von Bauteilen: Vol. Volume 2. Shaker Verlag.'
bibtex: '@book{Ott_2026, place={Düren}, series={Datenmanagement im Maschinenbau},
title={Methodik zum Aufbau einer Entwicklungsumgebung für die datengetriebene
Gestaltvorhersage von Bauteilen}, volume={Volume 2}, publisher={Shaker Verlag},
author={Ott, Manuel}, year={2026}, collection={Datenmanagement im Maschinenbau}
}'
chicago: 'Ott, Manuel. Methodik zum Aufbau einer Entwicklungsumgebung für die
datengetriebene Gestaltvorhersage von Bauteilen. Vol. Volume 2. Datenmanagement
im Maschinenbau. Düren: Shaker Verlag, 2026.'
ieee: 'M. Ott, Methodik zum Aufbau einer Entwicklungsumgebung für die datengetriebene
Gestaltvorhersage von Bauteilen, vol. Volume 2. Düren: Shaker Verlag, 2026.'
mla: Ott, Manuel. Methodik zum Aufbau einer Entwicklungsumgebung für die datengetriebene
Gestaltvorhersage von Bauteilen. Shaker Verlag, 2026.
short: M. Ott, Methodik zum Aufbau einer Entwicklungsumgebung für die datengetriebene
Gestaltvorhersage von Bauteilen, Shaker Verlag, Düren, 2026.
date_created: 2026-02-20T14:09:24Z
date_updated: 2026-02-20T14:14:28Z
department:
- _id: '741'
- _id: '144'
language:
- iso: ger
page: '180'
place: Düren
publication_identifier:
isbn:
- 978-3-8191-0488-6
publication_status: published
publisher: Shaker Verlag
series_title: Datenmanagement im Maschinenbau
status: public
supervisor:
- first_name: Iryna
full_name: Mozgova, Iryna
last_name: Mozgova
- first_name: Thomas
full_name: Tröster, Thomas
last_name: Tröster
title: Methodik zum Aufbau einer Entwicklungsumgebung für die datengetriebene Gestaltvorhersage
von Bauteilen
type: dissertation
user_id: '44204'
volume: Volume 2
year: '2026'
...
---
_id: '64159'
abstract:
- lang: eng
text: "ABSTRACT\r\n Separation
processes, such as distillation and stripping, are highly energy‐intensive. Typically,
energy is supplied indirectly via a reboiler, which is often associated with heat
losses. We present a preliminary theoretical evaluation of a novel concept to
supply energy directly inside the column using heatable structured packings. These
packings can be produced by multi‐material 3D printing, resulting in a conductive
inner layer and an insulating outer layer. Functioning as electric resistance
heaters, these packings serve as heating elements. In this numerical study, we
compared different scenarios of energy supply along the height of the column,
including uniform distribution, applying a temperature profile, and using or omitting
a reboiler."
article_number: e70076
article_type: original
author:
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
orcid: 0009-0006-7828-8448
- first_name: Sascha
full_name: Brüne, Sascha
last_name: Brüne
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Lutters N, Brüne S, Riese J. Preliminary Numerical Evaluation of Directly Heated
Structured Packings to be Used for Separation Processes. Chemie Ingenieur Technik.
Published online 2026. doi:10.1002/cite.70076
apa: Lutters, N., Brüne, S., & Riese, J. (2026). Preliminary Numerical Evaluation
of Directly Heated Structured Packings to be Used for Separation Processes. Chemie
Ingenieur Technik, Article e70076. https://doi.org/10.1002/cite.70076
bibtex: '@article{Lutters_Brüne_Riese_2026, title={Preliminary Numerical Evaluation
of Directly Heated Structured Packings to be Used for Separation Processes}, DOI={10.1002/cite.70076}, number={e70076},
journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Lutters, Nicole
and Brüne, Sascha and Riese, Julia}, year={2026} }'
chicago: Lutters, Nicole, Sascha Brüne, and Julia Riese. “Preliminary Numerical
Evaluation of Directly Heated Structured Packings to Be Used for Separation Processes.”
Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70076.
ieee: 'N. Lutters, S. Brüne, and J. Riese, “Preliminary Numerical Evaluation of
Directly Heated Structured Packings to be Used for Separation Processes,” Chemie
Ingenieur Technik, Art. no. e70076, 2026, doi: 10.1002/cite.70076.'
mla: Lutters, Nicole, et al. “Preliminary Numerical Evaluation of Directly Heated
Structured Packings to Be Used for Separation Processes.” Chemie Ingenieur
Technik, e70076, Wiley, 2026, doi:10.1002/cite.70076.
short: N. Lutters, S. Brüne, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-02-16T07:56:53Z
date_updated: 2026-02-23T06:59:41Z
department:
- _id: '831'
doi: 10.1002/cite.70076
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Preliminary Numerical Evaluation of Directly Heated Structured Packings to
be Used for Separation Processes
type: journal_article
user_id: '22006'
year: '2026'
...
---
_id: '63607'
author:
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Lars
full_name: Schmelzle, Lars
last_name: Schmelzle
- first_name: Gunnar
full_name: Possart, Gunnar
last_name: Possart
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
citation:
ama: Striewe M, Schmelzle L, Possart G, Meschut G, Mergheim J, Teutenberg D. Analytical
parameter identification for a viscoplastic material model for structural adhesive
bonds. Journal of Adhesion Science and Technology. Published online 2026:1-38.
doi:10.1080/01694243.2025.2611999
apa: Striewe, M., Schmelzle, L., Possart, G., Meschut, G., Mergheim, J., & Teutenberg,
D. (2026). Analytical parameter identification for a viscoplastic material model
for structural adhesive bonds. Journal of Adhesion Science and Technology,
1–38. https://doi.org/10.1080/01694243.2025.2611999
bibtex: '@article{Striewe_Schmelzle_Possart_Meschut_Mergheim_Teutenberg_2026, title={Analytical
parameter identification for a viscoplastic material model for structural adhesive
bonds}, DOI={10.1080/01694243.2025.2611999},
journal={Journal of Adhesion Science and Technology}, publisher={Informa UK Limited},
author={Striewe, Marius and Schmelzle, Lars and Possart, Gunnar and Meschut, Gerson
and Mergheim, Julia and Teutenberg, Dominik}, year={2026}, pages={1–38} }'
chicago: Striewe, Marius, Lars Schmelzle, Gunnar Possart, Gerson Meschut, Julia
Mergheim, and Dominik Teutenberg. “Analytical Parameter Identification for a Viscoplastic
Material Model for Structural Adhesive Bonds.” Journal of Adhesion Science
and Technology, 2026, 1–38. https://doi.org/10.1080/01694243.2025.2611999.
ieee: 'M. Striewe, L. Schmelzle, G. Possart, G. Meschut, J. Mergheim, and D. Teutenberg,
“Analytical parameter identification for a viscoplastic material model for structural
adhesive bonds,” Journal of Adhesion Science and Technology, pp. 1–38,
2026, doi: 10.1080/01694243.2025.2611999.'
mla: Striewe, Marius, et al. “Analytical Parameter Identification for a Viscoplastic
Material Model for Structural Adhesive Bonds.” Journal of Adhesion Science
and Technology, Informa UK Limited, 2026, pp. 1–38, doi:10.1080/01694243.2025.2611999.
short: M. Striewe, L. Schmelzle, G. Possart, G. Meschut, J. Mergheim, D. Teutenberg,
Journal of Adhesion Science and Technology (2026) 1–38.
date_created: 2026-01-14T08:27:17Z
date_updated: 2026-02-23T08:21:47Z
department:
- _id: '157'
doi: 10.1080/01694243.2025.2611999
language:
- iso: eng
page: 1-38
publication: Journal of Adhesion Science and Technology
publication_identifier:
issn:
- 0169-4243
- 1568-5616
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Analytical parameter identification for a viscoplastic material model for structural
adhesive bonds
type: journal_article
user_id: '537'
year: '2026'
...
---
_id: '63821'
article_number: '104264'
author:
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Linda
full_name: Fröck, Linda
last_name: Fröck
- first_name: Christopher
full_name: Wald, Christopher
last_name: Wald
- first_name: Vanessa
full_name: Neßlinger, Vanessa
last_name: Neßlinger
- first_name: Karsten
full_name: Dobrindt-Tittmann, Karsten
last_name: Dobrindt-Tittmann
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Christian
full_name: Mathiszik, Christian
last_name: Mathiszik
- first_name: Hans Christian
full_name: Schmale, Hans Christian
last_name: Schmale
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: 'Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys
in maritime environments: A review. International Journal of Adhesion and Adhesives.
2026;147. doi:10.1016/j.ijadhadh.2026.104264'
apa: 'Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann,
K., Troschitz, J., Neubert, F. L., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale,
H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively
bonded alloys in maritime environments: A review. International Journal of
Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264'
bibtex: '@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et
al._2026, title={Corrosion of adhesively bonded alloys in maritime environments:
A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264},
number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda
and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and
Troschitz, Juliane and Neubert, Fynn Lucas and Hofmann, Martin and et al.}, year={2026}
}'
chicago: 'Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald,
Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively
Bonded Alloys in Maritime Environments: A Review.” International Journal of
Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264.'
ieee: 'M. Gude et al., “Corrosion of adhesively bonded alloys in maritime
environments: A review,” International Journal of Adhesion and Adhesives,
vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.'
mla: 'Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments:
A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264,
Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.'
short: M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann,
J. Troschitz, F.L. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale,
T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives
147 (2026).
date_created: 2026-01-30T15:54:11Z
date_updated: 2026-02-23T10:22:02Z
department:
- _id: '157'
doi: 10.1016/j.ijadhadh.2026.104264
intvolume: ' 147'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Corrosion of adhesively bonded alloys in maritime environments: A review'
type: journal_article
user_id: '74308'
volume: 147
year: '2026'
...
---
_id: '64130'
author:
- first_name: Lucas
full_name: Hermelingmeier, Lucas
id: '58649'
last_name: Hermelingmeier
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Hermelingmeier L, Teutenberg D, Meschut G. Methodenentwicklung zur Ermittlung
lokaler Klebschichtzustände innerhalb struktureller Verbindungen. In: DECHEMA,
ed. 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik. ; 2026.'
apa: 'Hermelingmeier, L., Teutenberg, D., & Meschut, G. (2026). Methodenentwicklung
zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen.
In DECHEMA (Ed.), 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Hermelingmeier_Teutenberg_Meschut_2026, title={Methodenentwicklung
zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen},
booktitle={26. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hermelingmeier,
Lucas and Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2026}
}'
chicago: 'Hermelingmeier, Lucas, Dominik Teutenberg, and Gerson Meschut. “Methodenentwicklung
Zur Ermittlung Lokaler Klebschichtzustände Innerhalb Struktureller Verbindungen.”
In 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
2026.'
ieee: 'L. Hermelingmeier, D. Teutenberg, and G. Meschut, “Methodenentwicklung zur
Ermittlung lokaler Klebschichtzustände innerhalb struktureller Verbindungen,”
in 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2026.'
mla: 'Hermelingmeier, Lucas, et al. “Methodenentwicklung Zur Ermittlung Lokaler
Klebschichtzustände Innerhalb Struktureller Verbindungen.” 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, 2026.'
short: 'L. Hermelingmeier, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-02-12T11:35:26Z
date_updated: 2026-02-23T11:43:48Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Methodenentwicklung zur Ermittlung lokaler Klebschichtzustände innerhalb struktureller
Verbindungen
type: conference_abstract
user_id: '537'
year: '2026'
...
---
_id: '64589'
author:
- first_name: Maxim
full_name: Rodschei, Maxim
last_name: Rodschei
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Rodschei M, Mergheim J, Neubert FL, Teutenberg D, Meschut G. Experimentelle
und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer
und hygrothermischer Beanspruchung im Stahl- und Anlagenbau. In: 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik. ; 2026.'
apa: 'Rodschei, M., Mergheim, J., Neubert, F. L., Teutenberg, D., & Meschut,
G. (2026). Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen
unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau.
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik. 26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, Köln.'
bibtex: '@inproceedings{Rodschei_Mergheim_Neubert_Teutenberg_Meschut_2026, title={Experimentelle
und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer
und hygrothermischer Beanspruchung im Stahl- und Anlagenbau}, booktitle={26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik}, author={Rodschei, Maxim and Mergheim,
Julia and Neubert, Fynn Lucas and Teutenberg, Dominik and Meschut, Gerson}, year={2026}
}'
chicago: 'Rodschei, Maxim, Julia Mergheim, Fynn Lucas Neubert, Dominik Teutenberg,
and Gerson Meschut. “Experimentelle Und Numerische Untersuchungen Zur Alterung
von Klebverbindungen Unter Zyklischer Und Hygrothermischer Beanspruchung Im Stahl-
Und Anlagenbau.” In 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik,
2026.'
ieee: 'M. Rodschei, J. Mergheim, F. L. Neubert, D. Teutenberg, and G. Meschut, “Experimentelle
und numerische Untersuchungen zur Alterung von Klebverbindungen unter zyklischer
und hygrothermischer Beanspruchung im Stahl- und Anlagenbau,” presented at the
26. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2026.'
mla: 'Rodschei, Maxim, et al. “Experimentelle Und Numerische Untersuchungen Zur
Alterung von Klebverbindungen Unter Zyklischer Und Hygrothermischer Beanspruchung
Im Stahl- Und Anlagenbau.” 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik,
2026.'
short: 'M. Rodschei, J. Mergheim, F.L. Neubert, D. Teutenberg, G. Meschut, in: 26.
Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
date_created: 2026-02-23T13:28:04Z
date_updated: 2026-02-23T13:30:18Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Experimentelle und numerische Untersuchungen zur Alterung von Klebverbindungen
unter zyklischer und hygrothermischer Beanspruchung im Stahl- und Anlagenbau
type: conference_abstract
user_id: '74308'
year: '2026'
...
---
_id: '64590'
author:
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Neubert FL, Teutenberg D, Meschut G. Optimierung der induktiven Klebstoff-Schnellhärtung
durch numerische Prozesssimulation. In: 26. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik. ; 2026.'
apa: 'Neubert, F. L., Teutenberg, D., & Meschut, G. (2026). Optimierung der
induktiven Klebstoff-Schnellhärtung durch numerische Prozesssimulation. 26.
Kolloquium: Gemeinsame Forschung in Der Klebtechnik. 26. Kolloquium: Gemeinsame
Forschung in der Klebtechnik, Köln.'
bibtex: '@inproceedings{Neubert_Teutenberg_Meschut_2026, title={Optimierung der
induktiven Klebstoff-Schnellhärtung durch numerische Prozesssimulation}, booktitle={26.
Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Neubert, Fynn Lucas
and Teutenberg, Dominik and Meschut, Gerson}, year={2026} }'
chicago: 'Neubert, Fynn Lucas, Dominik Teutenberg, and Gerson Meschut. “Optimierung
Der Induktiven Klebstoff-Schnellhärtung Durch Numerische Prozesssimulation.” In
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2026.'
ieee: 'F. L. Neubert, D. Teutenberg, and G. Meschut, “Optimierung der induktiven
Klebstoff-Schnellhärtung durch numerische Prozesssimulation,” presented at the
26. Kolloquium: Gemeinsame Forschung in der Klebtechnik, Köln, 2026.'
mla: 'Neubert, Fynn Lucas, et al. “Optimierung Der Induktiven Klebstoff-Schnellhärtung
Durch Numerische Prozesssimulation.” 26. Kolloquium: Gemeinsame Forschung in
Der Klebtechnik, 2026.'
short: 'F.L. Neubert, D. Teutenberg, G. Meschut, in: 26. Kolloquium: Gemeinsame
Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
location: Köln
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
date_created: 2026-02-23T13:32:27Z
date_updated: 2026-02-23T13:33:03Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Optimierung der induktiven Klebstoff-Schnellhärtung durch numerische Prozesssimulation
type: conference_abstract
user_id: '74308'
year: '2026'
...
---
_id: '64593'
author:
- first_name: Fynn Lucas
full_name: Neubert, Fynn Lucas
id: '74308'
last_name: Neubert
orcid: 0009-0006-5243-4531
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Maxim
full_name: Rodschei, Maxim
last_name: Rodschei
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: 'Neubert FL, Teutenberg D, Meschut G, Rodschei M, Mergheim J. Bewitterung in
der Simulation. In: DECHEMA-Workshop Für Klebstoffanwender: Langzeitverhalten
von Klebungen. ; 2026.'
apa: 'Neubert, F. L., Teutenberg, D., Meschut, G., Rodschei, M., & Mergheim,
J. (2026). Bewitterung in der Simulation. DECHEMA-Workshop Für Klebstoffanwender:
Langzeitverhalten von Klebungen. DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten
von Klebungen, Köln.'
bibtex: '@inproceedings{Neubert_Teutenberg_Meschut_Rodschei_Mergheim_2026, title={Bewitterung
in der Simulation}, booktitle={DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten
von Klebungen}, author={Neubert, Fynn Lucas and Teutenberg, Dominik and Meschut,
Gerson and Rodschei, Maxim and Mergheim, Julia}, year={2026} }'
chicago: 'Neubert, Fynn Lucas, Dominik Teutenberg, Gerson Meschut, Maxim Rodschei,
and Julia Mergheim. “Bewitterung in Der Simulation.” In DECHEMA-Workshop Für
Klebstoffanwender: Langzeitverhalten von Klebungen, 2026.'
ieee: 'F. L. Neubert, D. Teutenberg, G. Meschut, M. Rodschei, and J. Mergheim, “Bewitterung
in der Simulation,” presented at the DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten
von Klebungen, Köln, 2026.'
mla: 'Neubert, Fynn Lucas, et al. “Bewitterung in Der Simulation.” DECHEMA-Workshop
Für Klebstoffanwender: Langzeitverhalten von Klebungen, 2026.'
short: 'F.L. Neubert, D. Teutenberg, G. Meschut, M. Rodschei, J. Mergheim, in: DECHEMA-Workshop
Für Klebstoffanwender: Langzeitverhalten von Klebungen, 2026.'
conference:
end_date: 2026-02-09
location: Köln
name: 'DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten von Klebungen'
start_date: 2026-02-09
date_created: 2026-02-23T13:35:40Z
date_updated: 2026-02-23T13:35:48Z
department:
- _id: '157'
language:
- iso: eng
publication: 'DECHEMA-Workshop für Klebstoffanwender: Langzeitverhalten von Klebungen'
status: public
title: Bewitterung in der Simulation
type: conference_abstract
user_id: '74308'
year: '2026'
...
---
_id: '55308'
abstract:
- lang: eng
text: Established companies are undertaking major transformation initiatives of
their corporate structures and organisational forms to cope with the complexity
during the engineering of cyber-physical production systems (CPPS). A frequently
discussed issue is the measurability of this transformation progress. This paper
conducts a systematic literature analysis of approaches regarding measurability
of transformation and evaluates their application in the context of a systems
engineering transformation. Measure-ment criteria are derived from the identified
approaches, categorised, and finally evaluated by industry experts regarding their
applicability. The categorised measurement criteria can be used to accurately
measure the progress of a transformation process.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Benedikt
full_name: Grewe, Benedikt
id: '52359'
last_name: Grewe
citation:
ama: 'Gräßler I, Grewe B. Measuring Systems Engineering Transformation: A systematic
literature review. doi:https://doi.org/10.1016/j.procir.2026.01.202'
apa: 'Gräßler, I., & Grewe, B. (n.d.). Measuring Systems Engineering Transformation:
A systematic literature review. 18th CIRP Conference on Intelligent Computation
in Manufacturing Engineering, Ischia, Italy. https://doi.org/10.1016/j.procir.2026.01.202'
bibtex: '@article{Gräßler_Grewe, series={18th CIRP Conference on Intelligent Computation
in Manufacturing Engineering, 10-12 July 2024}, title={Measuring Systems Engineering
Transformation: A systematic literature review}, DOI={https://doi.org/10.1016/j.procir.2026.01.202},
author={Gräßler, Iris and Grewe, Benedikt}, collection={18th CIRP Conference on
Intelligent Computation in Manufacturing Engineering, 10-12 July 2024} }'
chicago: 'Gräßler, Iris, and Benedikt Grewe. “Measuring Systems Engineering Transformation:
A Systematic Literature Review.” 18th CIRP Conference on Intelligent Computation
in Manufacturing Engineering, 10-12 July 2024, n.d. https://doi.org/10.1016/j.procir.2026.01.202.'
ieee: 'I. Gräßler and B. Grewe, “Measuring Systems Engineering Transformation: A
systematic literature review.” doi: https://doi.org/10.1016/j.procir.2026.01.202.'
mla: 'Gräßler, Iris, and Benedikt Grewe. Measuring Systems Engineering Transformation:
A Systematic Literature Review. doi:https://doi.org/10.1016/j.procir.2026.01.202.'
short: I. Gräßler, B. Grewe, (n.d.).
conference:
end_date: 2024-07-12
location: Ischia, Italy
name: 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering
start_date: 2024-07-10
date_created: 2024-07-17T12:49:44Z
date_updated: 2026-02-24T07:41:48Z
department:
- _id: '152'
doi: https://doi.org/10.1016/j.procir.2026.01.202
keyword:
- Organizational Transformation
- Systems Engineering
- Meausrement
- Metrics
- Organizational Change
language:
- iso: eng
publication_status: inpress
quality_controlled: '1'
series_title: 18th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
10-12 July 2024
status: public
title: 'Measuring Systems Engineering Transformation: A systematic literature review'
type: conference
user_id: '52359'
year: '2026'
...
---
_id: '64602'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Philipp
full_name: Hesse, Philipp
id: '60633'
last_name: Hesse
- first_name: Ulrich
full_name: Jahnke, Ulrich
last_name: Jahnke
- first_name: Matthias
full_name: Habdank, Matthias
last_name: Habdank
citation:
ama: 'Gräßler I, Hesse P, Jahnke U, Habdank M. Verification of CO2 emissions for
the generative design of lightweight mobility systems using digital product passport.
In: Procedia CIRP. Vol 138. Elsevier BV; 2026:915-920. doi:10.1016/j.procir.2026.01.158'
apa: Gräßler, I., Hesse, P., Jahnke, U., & Habdank, M. (2026). Verification
of CO2 emissions for the generative design of lightweight mobility systems using
digital product passport. Procedia CIRP, 138, 915–920. https://doi.org/10.1016/j.procir.2026.01.158
bibtex: '@inproceedings{Gräßler_Hesse_Jahnke_Habdank_2026, title={Verification of
CO2 emissions for the generative design of lightweight mobility systems using
digital product passport}, volume={138}, DOI={10.1016/j.procir.2026.01.158},
booktitle={Procedia CIRP}, publisher={Elsevier BV}, author={Gräßler, Iris and
Hesse, Philipp and Jahnke, Ulrich and Habdank, Matthias}, year={2026}, pages={915–920}
}'
chicago: Gräßler, Iris, Philipp Hesse, Ulrich Jahnke, and Matthias Habdank. “Verification
of CO2 Emissions for the Generative Design of Lightweight Mobility Systems Using
Digital Product Passport.” In Procedia CIRP, 138:915–20. Elsevier BV, 2026.
https://doi.org/10.1016/j.procir.2026.01.158.
ieee: 'I. Gräßler, P. Hesse, U. Jahnke, and M. Habdank, “Verification of CO2 emissions
for the generative design of lightweight mobility systems using digital product
passport,” in Procedia CIRP, 2026, vol. 138, pp. 915–920, doi: 10.1016/j.procir.2026.01.158.'
mla: Gräßler, Iris, et al. “Verification of CO2 Emissions for the Generative Design
of Lightweight Mobility Systems Using Digital Product Passport.” Procedia CIRP,
vol. 138, Elsevier BV, 2026, pp. 915–20, doi:10.1016/j.procir.2026.01.158.
short: 'I. Gräßler, P. Hesse, U. Jahnke, M. Habdank, in: Procedia CIRP, Elsevier
BV, 2026, pp. 915–920.'
date_created: 2026-02-24T07:31:34Z
date_updated: 2026-02-24T07:33:36Z
department:
- _id: '152'
doi: 10.1016/j.procir.2026.01.158
intvolume: ' 138'
language:
- iso: eng
page: 915-920
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Verification of CO2 emissions for the generative design of lightweight mobility
systems using digital product passport
type: conference
user_id: '5905'
volume: 138
year: '2026'
...
---
_id: '64603'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Alena Marie
full_name: Tusek, Alena Marie
id: '59370'
last_name: Tusek
citation:
ama: 'Gräßler I, Tusek AM. Sustainability criteria for future foresight in manufacturing
companies. In: Procedia CIRP. Vol 138. Elsevier BV; 2026:945-950. doi:10.1016/j.procir.2026.01.163'
apa: Gräßler, I., & Tusek, A. M. (2026). Sustainability criteria for future
foresight in manufacturing companies. Procedia CIRP, 138, 945–950.
https://doi.org/10.1016/j.procir.2026.01.163
bibtex: '@inproceedings{Gräßler_Tusek_2026, title={Sustainability criteria for future
foresight in manufacturing companies}, volume={138}, DOI={10.1016/j.procir.2026.01.163},
booktitle={Procedia CIRP}, publisher={Elsevier BV}, author={Gräßler, Iris and
Tusek, Alena Marie}, year={2026}, pages={945–950} }'
chicago: Gräßler, Iris, and Alena Marie Tusek. “Sustainability Criteria for Future
Foresight in Manufacturing Companies.” In Procedia CIRP, 138:945–50. Elsevier
BV, 2026. https://doi.org/10.1016/j.procir.2026.01.163.
ieee: 'I. Gräßler and A. M. Tusek, “Sustainability criteria for future foresight
in manufacturing companies,” in Procedia CIRP, 2026, vol. 138, pp. 945–950,
doi: 10.1016/j.procir.2026.01.163.'
mla: Gräßler, Iris, and Alena Marie Tusek. “Sustainability Criteria for Future Foresight
in Manufacturing Companies.” Procedia CIRP, vol. 138, Elsevier BV, 2026,
pp. 945–50, doi:10.1016/j.procir.2026.01.163.
short: 'I. Gräßler, A.M. Tusek, in: Procedia CIRP, Elsevier BV, 2026, pp. 945–950.'
date_created: 2026-02-24T07:33:57Z
date_updated: 2026-02-24T07:34:47Z
department:
- _id: '152'
doi: 10.1016/j.procir.2026.01.163
intvolume: ' 138'
language:
- iso: eng
page: 945-950
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Sustainability criteria for future foresight in manufacturing companies
type: conference
user_id: '5905'
volume: 138
year: '2026'
...
---
_id: '56957'
author:
- first_name: Asif
full_name: Iqbal, Asif
last_name: Iqbal
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
citation:
ama: Iqbal A, Neukötter M. Spraying Fluids Viscoelastic Fluids in the Filament
Extension Atomizer.; 2026.
apa: Iqbal, A., & Neukötter, M. (2026). Spraying fluids viscoelastic fluids
in the Filament Extension Atomizer.
bibtex: '@book{Iqbal_Neukötter_2026, title={Spraying fluids viscoelastic fluids
in the Filament Extension Atomizer}, author={Iqbal, Asif and Neukötter, Moritz},
year={2026} }'
chicago: Iqbal, Asif, and Moritz Neukötter. Spraying Fluids Viscoelastic Fluids
in the Filament Extension Atomizer, 2026.
ieee: A. Iqbal and M. Neukötter, Spraying fluids viscoelastic fluids in the Filament
Extension Atomizer. 2026.
mla: Iqbal, Asif, and Moritz Neukötter. Spraying Fluids Viscoelastic Fluids in
the Filament Extension Atomizer. 2026.
short: A. Iqbal, M. Neukötter, Spraying Fluids Viscoelastic Fluids in the Filament
Extension Atomizer, 2026.
date_created: 2024-11-08T09:06:01Z
date_updated: 2026-02-26T08:45:55Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
status: public
supervisor:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
title: Spraying fluids viscoelastic fluids in the Filament Extension Atomizer
type: mastersthesis
user_id: '45530'
year: '2026'
...
---
_id: '64678'
abstract:
- lang: eng
text: "One of the major topics in the modern automotive industry is reducing emissions
and increasing the mileage\r\nrange. To tackle this challenge, on the one hand,
modifying the powertrain system is a possibility, and on the\r\nother hand, lightweight
design offers various possibilities. Multi-Material Design (MMD) involves designing
car\r\nbodies that combine different materials that require joining. Given the
variety of materials, mechanical joining\r\nprocesses are preferred. Especially
the current development of the Giga/Mega-casting process concerning\r\naluminium
casting and the subsequent mechanical joining illustrates the challenges of this
material group. In car\r\nproduction, aluminium castings are mainly made from
aluminium-silicon (AlSi) alloys. Ultimately, the alloy\r\nsystem's insufficient
ductility leads to crack initiation during mechanical joining. Cast parts are
therefore often\r\nused in areas of the car body that are exposed to high-pressure
loads. For example, self-piercing riveting (SPR) is\r\nused due to its high load-bearing
capacity. In this study, improved joinability is demonstrated by influencing the\r\nmicrostructure
through tailored solidification rates and a developed heat-treatment chain strategy
adapted for\r\nhypoeutectic AlSi systems. Data on microstructure, mechanical,
and joining properties are used to develop a\r\nsolidification-joining correlation
for the SPR process across a range of Si contents and solidification rates. The\r\npurpose
is to develop the ability to produce suitable aluminium castings with sufficient
joinability, thereby\r\nimproving versatility."
article_type: original
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Pia Katharina
full_name: Kaimann, Pia Katharina
id: '44935'
last_name: Kaimann
- first_name: Ina
full_name: Stratmann, Ina
last_name: Stratmann
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Johann Moritz Benedikt
full_name: Klöckner, Johann Moritz Benedikt
last_name: Klöckner
- first_name: Moritz
full_name: Mann, Moritz
last_name: Mann
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Neuser M, Kaimann PK, Stratmann I, et al. Solidification-joinability correlation
of hypoeutectic aluminium casting alloys for self-piercing riveting (SPR). Journal
of Manufacturing Processes. 2026;164. doi:https://doi.org/10.1016/j.jmapro.2026.02.040
apa: Neuser, M., Kaimann, P. K., Stratmann, I., Bobbert, M., Klöckner, J. M. B.,
Mann, M., Hoyer, K.-P., Meschut, G., & Schaper, M. (2026). Solidification-joinability
correlation of hypoeutectic aluminium casting alloys for self-piercing riveting
(SPR). Journal of Manufacturing Processes, 164. https://doi.org/10.1016/j.jmapro.2026.02.040
bibtex: '@article{Neuser_Kaimann_Stratmann_Bobbert_Klöckner_Mann_Hoyer_Meschut_Schaper_2026,
title={Solidification-joinability correlation of hypoeutectic aluminium casting
alloys for self-piercing riveting (SPR)}, volume={164}, DOI={https://doi.org/10.1016/j.jmapro.2026.02.040},
journal={Journal of Manufacturing Processes}, publisher={Elsevier}, author={Neuser,
Moritz and Kaimann, Pia Katharina and Stratmann, Ina and Bobbert, Mathias and
Klöckner, Johann Moritz Benedikt and Mann, Moritz and Hoyer, Kay-Peter and Meschut,
Gerson and Schaper, Mirko}, year={2026} }'
chicago: Neuser, Moritz, Pia Katharina Kaimann, Ina Stratmann, Mathias Bobbert,
Johann Moritz Benedikt Klöckner, Moritz Mann, Kay-Peter Hoyer, Gerson Meschut,
and Mirko Schaper. “Solidification-Joinability Correlation of Hypoeutectic Aluminium
Casting Alloys for Self-Piercing Riveting (SPR).” Journal of Manufacturing
Processes 164 (2026). https://doi.org/10.1016/j.jmapro.2026.02.040.
ieee: 'M. Neuser et al., “Solidification-joinability correlation of hypoeutectic
aluminium casting alloys for self-piercing riveting (SPR),” Journal of Manufacturing
Processes, vol. 164, 2026, doi: https://doi.org/10.1016/j.jmapro.2026.02.040.'
mla: Neuser, Moritz, et al. “Solidification-Joinability Correlation of Hypoeutectic
Aluminium Casting Alloys for Self-Piercing Riveting (SPR).” Journal of Manufacturing
Processes, vol. 164, Elsevier, 2026, doi:https://doi.org/10.1016/j.jmapro.2026.02.040.
short: M. Neuser, P.K. Kaimann, I. Stratmann, M. Bobbert, J.M.B. Klöckner, M. Mann,
K.-P. Hoyer, G. Meschut, M. Schaper, Journal of Manufacturing Processes 164 (2026).
date_created: 2026-02-26T11:21:24Z
date_updated: 2026-02-26T11:22:03Z
department:
- _id: '43'
- _id: '158'
- _id: '157'
- _id: '321'
doi: https://doi.org/10.1016/j.jmapro.2026.02.040
funded_apc: '1'
intvolume: ' 164'
keyword:
- Mechanical joining
- Aluminium
- Self-piercing riveting
- Casting
- Microstructure
- Joinability AlSi-alloys
language:
- iso: eng
project:
- _id: '131'
name: TRR 285 - Project Area A
- _id: '133'
name: TRR 285 - Project Area C
- _id: '136'
name: TRR 285 - Subproject A02
- _id: '146'
name: TRR 285 - Subproject C02
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Manufacturing Processes
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Solidification-joinability correlation of hypoeutectic aluminium casting alloys
for self-piercing riveting (SPR)
type: journal_article
user_id: '32340'
volume: 164
year: '2026'
...