---
_id: '57899'
abstract:
- lang: ger
text: "In Haushaltskältegeräten werden in den letzten Jahren immer häufiger Vakuumisolationspaneele
(VIP) eingesetzt. Hiermit ist es unter anderem möglich, dass die Geräte in die
Energieeffizienzklassen A bis C klassifiziert werden können. Ein VIP besteht vereinfacht
aus einer Schutzfolie, die nahezu gasdicht ist und einem Füllmaterial, welches
für die Formstabilität im Vakuum zuständig ist. Aufgrund von technischen Alterungsprozessen
kommt es mit der Zeit zu einem Anstieg des Innendrucks im VIP, wodurch die Wärmeleitfähigkeit
des VIP steigt. Je nach Füllmaterial erfolgt dieser Alterungsprozess unterschiedlich
schnell. Im Extremfall kann so ein neues Haushalts-kältegerät der Energieeffizienzklasse
A nach 1 bis 3 Jahren nur noch als Klasse D bis F eingestuft werden.\r\nInnerhalb
eines Forschungsprojekts wurden Haushaltskältegeräte mit VIP thermografisch untersucht.
Im Rahmen dieser Studienarbeit wurde ein Versuchsaufbau entwickelt, mit dem die
zeitliche Veränderung von Wärmebrücken begutachtet werden kann und so Rückschlüsse
auf den Effizienzverlust der Geräte möglich sind. Der Funkionsnachweises dieses
Versuchsaufbaus wurden an einem Haushaltskältegerät mit künstlich gealterten Vakuumisolationspaneelen
durchgeführt. Diese Arbeiten bieten zukünftig die Möglichkeiten Haushaltskältegeräten
mit VIP bezüglich ihres Degenerationsverhaltens besser zu beurteilen.\r\n"
author:
- first_name: Emily
full_name: Potthast, Emily
last_name: Potthast
- first_name: Andreas
full_name: Elsner, Andreas
id: '16124'
last_name: Elsner
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Tina
full_name: Kasper, Tina
id: '94562'
last_name: Kasper
orcid: '0000-0003-3993-5316 '
citation:
ama: 'Potthast E, Elsner A, Paul A, Kasper T. Thermografische Messungen an Haushaltskältegeräten
mit Vakuumisolationspaneele. In: Deutscher Kälte‐ und Klimatechnischer Verein
e.V., ed. Deutsche Kälte- und Klimatagung 2024 Dresden. Deutscher Kälte‐
und Klimatechnischer Verein e.V.; 2025.'
apa: Potthast, E., Elsner, A., Paul, A., & Kasper, T. (2025). Thermografische
Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele. In Deutscher Kälte‐
und Klimatechnischer Verein e.V. (Ed.), Deutsche Kälte- und Klimatagung 2024
Dresden. Deutscher Kälte‐ und Klimatechnischer Verein e.V.
bibtex: '@inproceedings{Potthast_Elsner_Paul_Kasper_2025, place={Hannover}, title={Thermografische
Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele}, booktitle={Deutsche
Kälte- und Klimatagung 2024 Dresden}, publisher={Deutscher Kälte‐ und Klimatechnischer
Verein e.V.}, author={Potthast, Emily and Elsner, Andreas and Paul, Andreas and
Kasper, Tina}, editor={Deutscher Kälte‐ und Klimatechnischer Verein e.V.}, year={2025}
}'
chicago: 'Potthast, Emily, Andreas Elsner, Andreas Paul, and Tina Kasper. “Thermografische
Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele.” In Deutsche
Kälte- und Klimatagung 2024 Dresden, edited by Deutscher Kälte‐ und Klimatechnischer
Verein e.V. Hannover: Deutscher Kälte‐ und Klimatechnischer Verein e.V., 2025.'
ieee: E. Potthast, A. Elsner, A. Paul, and T. Kasper, “Thermografische Messungen
an Haushaltskältegeräten mit Vakuumisolationspaneele,” in Deutsche Kälte- und
Klimatagung 2024 Dresden, Dresden, 2025.
mla: Potthast, Emily, et al. “Thermografische Messungen an Haushaltskältegeräten
mit Vakuumisolationspaneele.” Deutsche Kälte- und Klimatagung 2024 Dresden,
edited by Deutscher Kälte‐ und Klimatechnischer Verein e.V., Deutscher Kälte‐
und Klimatechnischer Verein e.V., 2025.
short: 'E. Potthast, A. Elsner, A. Paul, T. Kasper, in: Deutscher Kälte‐ und Klimatechnischer
Verein e.V. (Ed.), Deutsche Kälte- und Klimatagung 2024 Dresden, Deutscher Kälte‐
und Klimatechnischer Verein e.V., Hannover, 2025.'
conference:
end_date: 2024-11-22
location: Dresden
name: Deutsche Kälte- und Klimatagung 2024 Dresden
start_date: 2024-11-20
corporate_editor:
- Deutscher Kälte‐ und Klimatechnischer Verein e.V.
date_created: 2025-01-02T11:44:59Z
date_updated: 2025-02-04T06:56:20Z
department:
- _id: '728'
keyword:
- Haushaltskältegeräte
- Energieaufnahme
- Alterung
- Isolierung
- Vakuumisolationspaneele
language:
- iso: ger
place: Hannover
publication: Deutsche Kälte- und Klimatagung 2024 Dresden
publisher: Deutscher Kälte‐ und Klimatechnischer Verein e.V.
status: public
title: Thermografische Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele
type: conference
user_id: '7828'
year: '2025'
...
---
_id: '58510'
abstract:
- lang: eng
text: 'Today’s ultrasonic transducers find broad application in diverse
technology branches and most often cannot be replaced by other actuators. They
are typically based on lead-containing piezoelectric ceramics. These should be
replaced for environmental and health issues by lead-free alternatives. Multiple
material alternatives are already known, but there is a lack of information about
their technological readiness level. To fill this gap, a small series of prestressed
longitudinally vibrating transducers was set up with a standard PZT material and
two lead-free variants within this study. The entire process for building the
transducers is documented: characteristics of individual ring ceramics, burn-in
results, and free vibration and characteristics under load are shown. The main
result is that the investigated lead-free materials are ready to use within ultrasonic
bolted Langevin transducers (BLTs) for medium-power applications, when the geometrical
setup of the transducer is adopted. Since lead-free ceramics need higher voltages
to achieve the same power level, the driving electronics or the mechanical setup
must be altered specifically for each material. Lower self-heating of the lead-free
materials might be attractive for heat-sensitive processes.'
article_number: '55'
article_type: original
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Scheidemann C, Bornmann P, Littmann W, Hemsel T. Lead-Free Ceramics in Prestressed
Ultrasonic Transducers. Actuators. 2025;14(2). doi:10.3390/act14020055
apa: Scheidemann, C., Bornmann, P., Littmann, W., & Hemsel, T. (2025). Lead-Free
Ceramics in Prestressed Ultrasonic Transducers. Actuators, 14(2),
Article 55. https://doi.org/10.3390/act14020055
bibtex: '@article{Scheidemann_Bornmann_Littmann_Hemsel_2025, title={Lead-Free Ceramics
in Prestressed Ultrasonic Transducers}, volume={14}, DOI={10.3390/act14020055},
number={255}, journal={Actuators}, publisher={MDPI AG}, author={Scheidemann, Claus
and Bornmann, Peter and Littmann, Walter and Hemsel, Tobias}, year={2025} }'
chicago: Scheidemann, Claus, Peter Bornmann, Walter Littmann, and Tobias Hemsel.
“Lead-Free Ceramics in Prestressed Ultrasonic Transducers.” Actuators 14,
no. 2 (2025). https://doi.org/10.3390/act14020055.
ieee: 'C. Scheidemann, P. Bornmann, W. Littmann, and T. Hemsel, “Lead-Free Ceramics
in Prestressed Ultrasonic Transducers,” Actuators, vol. 14, no. 2, Art.
no. 55, 2025, doi: 10.3390/act14020055.'
mla: Scheidemann, Claus, et al. “Lead-Free Ceramics in Prestressed Ultrasonic Transducers.”
Actuators, vol. 14, no. 2, 55, MDPI AG, 2025, doi:10.3390/act14020055.
short: C. Scheidemann, P. Bornmann, W. Littmann, T. Hemsel, Actuators 14 (2025).
date_created: 2025-02-04T13:43:23Z
date_updated: 2025-02-04T13:46:41Z
department:
- _id: '151'
doi: 10.3390/act14020055
intvolume: ' 14'
issue: '2'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2076-0825/14/2/55
oa: '1'
publication: Actuators
publication_identifier:
issn:
- 2076-0825
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Lead-Free Ceramics in Prestressed Ultrasonic Transducers
type: journal_article
user_id: '210'
volume: 14
year: '2025'
...
---
_id: '59478'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Sven
full_name: Rarbach, Sven
id: '67999'
last_name: Rarbach
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: Gräßler I, Rarbach S, Pottebaum J. Data Quality in the Engineering of Circular
Products - Decision support for circular value creation through data ecosystems.
Industry 40 Science. 2025;2025(2). doi:10.30844/i4se.25.2.12
apa: Gräßler, I., Rarbach, S., & Pottebaum, J. (2025). Data Quality in the Engineering
of Circular Products - Decision support for circular value creation through data
ecosystems. Industry 4.0 Science, 2025(2). https://doi.org/10.30844/i4se.25.2.12
bibtex: '@article{Gräßler_Rarbach_Pottebaum_2025, title={Data Quality in the Engineering
of Circular Products - Decision support for circular value creation through data
ecosystems}, volume={2025}, DOI={10.30844/i4se.25.2.12},
number={2}, journal={Industry 4.0 Science}, publisher={GITO mbH Verlag}, author={Gräßler,
Iris and Rarbach, Sven and Pottebaum, Jens}, year={2025} }'
chicago: Gräßler, Iris, Sven Rarbach, and Jens Pottebaum. “Data Quality in the Engineering
of Circular Products - Decision Support for Circular Value Creation through Data
Ecosystems.” Industry 4.0 Science 2025, no. 2 (2025). https://doi.org/10.30844/i4se.25.2.12.
ieee: 'I. Gräßler, S. Rarbach, and J. Pottebaum, “Data Quality in the Engineering
of Circular Products - Decision support for circular value creation through data
ecosystems,” Industry 4.0 Science, vol. 2025, no. 2, 2025, doi: 10.30844/i4se.25.2.12.'
mla: Gräßler, Iris, et al. “Data Quality in the Engineering of Circular Products
- Decision Support for Circular Value Creation through Data Ecosystems.” Industry
4.0 Science, vol. 2025, no. 2, GITO mbH Verlag, 2025, doi:10.30844/i4se.25.2.12.
short: I. Gräßler, S. Rarbach, J. Pottebaum, Industry 4.0 Science 2025 (2025).
date_created: 2025-04-10T08:03:11Z
date_updated: 2025-04-10T08:04:33Z
department:
- _id: '152'
doi: 10.30844/i4se.25.2.12
intvolume: ' 2025'
issue: '2'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.30844/I4SE.25.2.12
oa: '1'
publication: Industry 4.0 Science
publication_identifier:
issn:
- 2942-6170
publication_status: published
publisher: GITO mbH Verlag
quality_controlled: '1'
status: public
title: Data Quality in the Engineering of Circular Products - Decision support for
circular value creation through data ecosystems
type: journal_article
user_id: '67999'
volume: 2025
year: '2025'
...
---
_id: '59483'
abstract:
- lang: eng
text: Abstract. The assessment of mechanically joined connections, such
as clinched connections, is usually conducted destructively. Applicable non-destructive
testing methods like computed tomography are time-consuming and costly, or, like
electrical resistance measurement, provide only a limited amount of information.
A fast, non-destructive evaluation of the joints condition shall be made possible
by using transient dynamic analysis (TDA). It is based on the introduction of
sound waves and the evaluation of the response behavior after passing through
the structure. This study focuses the application of TDA to clinched shear connections
to evaluate the performance of the tactile measuring setup. Twenty-one series
were investigated, covering variations in joining task, manufacturing and defect.
The evaluation was carried out using machine learning to determine for which series
characteristic signals may be detected. It was shown that a classification of
the investigated specimens is possible, whereby the classification accuracy depends
on the examined variation. Furthermore, the accuracy was evaluated as a function
of frequency and results were concluded to identify the limits of the used measuring
setup.
author:
- first_name: Gregor
full_name: Reschke, Gregor
last_name: Reschke
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: 'Reschke G, Brosius A. Transient dynamic analysis: Performance evaluation of
tactile measurement. In: Materials Research Proceedings. Vol 52. Materials
Research Forum LLC; 2025:293-300. doi:10.21741/9781644903551-36'
apa: 'Reschke, G., & Brosius, A. (2025). Transient dynamic analysis: Performance
evaluation of tactile measurement. Materials Research Proceedings, 52,
293–300. https://doi.org/10.21741/9781644903551-36'
bibtex: '@inproceedings{Reschke_Brosius_2025, title={Transient dynamic analysis:
Performance evaluation of tactile measurement}, volume={52}, DOI={10.21741/9781644903551-36},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Reschke, Gregor and Brosius, Alexander}, year={2025}, pages={293–300}
}'
chicago: 'Reschke, Gregor, and Alexander Brosius. “Transient Dynamic Analysis: Performance
Evaluation of Tactile Measurement.” In Materials Research Proceedings,
52:293–300. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-36.'
ieee: 'G. Reschke and A. Brosius, “Transient dynamic analysis: Performance evaluation
of tactile measurement,” in Materials Research Proceedings, Paderborn,
2025, vol. 52, pp. 293–300, doi: 10.21741/9781644903551-36.'
mla: 'Reschke, Gregor, and Alexander Brosius. “Transient Dynamic Analysis: Performance
Evaluation of Tactile Measurement.” Materials Research Proceedings, vol.
52, Materials Research Forum LLC, 2025, pp. 293–300, doi:10.21741/9781644903551-36.'
short: 'G. Reschke, A. Brosius, in: Materials Research Proceedings, Materials Research
Forum LLC, 2025, pp. 293–300.'
conference:
end_date: 2025-04-03
location: Paderborn
name: 21st SheMet Conference
start_date: 2025-04-01
date_created: 2025-04-10T11:27:20Z
date_updated: 2025-04-10T11:33:28Z
department:
- _id: '43'
- _id: '157'
doi: 10.21741/9781644903551-36
intvolume: ' 52'
keyword:
- Joining
- Machine Learning
- Transient Dynamic Analysis
language:
- iso: eng
page: 293-300
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: 'Transient dynamic analysis: Performance evaluation of tactile measurement'
type: conference
user_id: '98812'
volume: 52
year: '2025'
...
---
_id: '59683'
abstract:
- lang: eng
text: "Woven fibre-reinforced polymers are used in a variety of application, especially
where a low mass to stiffness ratio is required. Of paramount importance for the
tailored mechanical properties these composite materials exhibit is the type and
geometry of the fibre weave. Especially continuous fibre-reinforced thermoplastic
composites are fabricated as laminates and subsequently exposed to forming processes
which alter the geometry of the fibres unit cell and thus the local mechanical
properties of the material. An approach utilising broadband ultrasonic waves is
proposed to non-destructively determine the geometry of the unit cell of the weave.\r\n\r\nThe
dispersive behaviour of woven fibre-reinforced sheets is described in accordance
with the Flouquet-Bloch theorem as a phononic crystal. In order to develop a model
for a description of these periodically structured waveguides, the smallest repeating
unit of the wave is modelled with periodic boundary conditions. The resulting
dispersion diagram exhibits similarities to that of a homogeneous plate, but additionally
displays a periodicity in the wavenumber regime, which correspond with the size
of the unit cell. Experimental studies of the dispersive behaviour of acoustic
waves in woven fibre-reinforced samples also show a periodicity in the wavenumber
regime, enabling a measurement procedure of the unit cell geometry."
author:
- first_name: Mareen
full_name: Wippermann, Mareen
id: '74624'
last_name: Wippermann
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Philipp
full_name: Brandes, Philipp
id: '70091'
last_name: Brandes
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Wippermann M, Claes L, Brandes P, Moritzer E, Henning B. Determination of
the unit cell geometry in fibre-reinforced polymer sheets using guided acoustic
waves. In: ; 2025. doi:10.71568/DASDAGA2025.116'
apa: Wippermann, M., Claes, L., Brandes, P., Moritzer, E., & Henning, B. (2025).
Determination of the unit cell geometry in fibre-reinforced polymer sheets
using guided acoustic waves. DAS | DAGA 2025 - 51st Annual Meeting on Acoustics,
Copenhagen. https://doi.org/10.71568/DASDAGA2025.116
bibtex: '@inproceedings{Wippermann_Claes_Brandes_Moritzer_Henning_2025, title={Determination
of the unit cell geometry in fibre-reinforced polymer sheets using guided acoustic
waves}, DOI={10.71568/DASDAGA2025.116},
author={Wippermann, Mareen and Claes, Leander and Brandes, Philipp and Moritzer,
Elmar and Henning, Bernd}, year={2025} }'
chicago: Wippermann, Mareen, Leander Claes, Philipp Brandes, Elmar Moritzer, and
Bernd Henning. “Determination of the Unit Cell Geometry in Fibre-Reinforced Polymer
Sheets Using Guided Acoustic Waves,” 2025. https://doi.org/10.71568/DASDAGA2025.116.
ieee: 'M. Wippermann, L. Claes, P. Brandes, E. Moritzer, and B. Henning, “Determination
of the unit cell geometry in fibre-reinforced polymer sheets using guided acoustic
waves,” presented at the DAS | DAGA 2025 - 51st Annual Meeting on Acoustics, Copenhagen,
2025, doi: 10.71568/DASDAGA2025.116.'
mla: Wippermann, Mareen, et al. Determination of the Unit Cell Geometry in Fibre-Reinforced
Polymer Sheets Using Guided Acoustic Waves. 2025, doi:10.71568/DASDAGA2025.116.
short: 'M. Wippermann, L. Claes, P. Brandes, E. Moritzer, B. Henning, in: 2025.'
conference:
end_date: 2025-03-20
location: Copenhagen
name: DAS | DAGA 2025 - 51st Annual Meeting on Acoustics
start_date: 2025-03-17
date_created: 2025-04-25T06:46:31Z
date_updated: 2025-04-25T08:58:02Z
department:
- _id: '49'
- _id: '147'
doi: 10.71568/DASDAGA2025.116
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '157'
grant_number: '495847374'
name: 'FaMOUS: Ein ultraschallbasiertes Messverfahren unter Berücksichtigung viskoelastischer
Eigenschaften zur Charakterisierung der Faser-Matrix-Haftung bei Organoblechen
sowie deren realitätsnahe Modellierung'
status: public
title: Determination of the unit cell geometry in fibre-reinforced polymer sheets
using guided acoustic waves
type: conference
user_id: '11829'
year: '2025'
...
---
_id: '59688'
author:
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Henning
full_name: Zeipert, Henning
id: '32580'
last_name: Zeipert
- first_name: Philipp
full_name: Brandes, Philipp
id: '70091'
last_name: Brandes
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Claes L, Zeipert H, Brandes P, Moritzer E, Henning B. Assessment of Fibre-Matrix
Adhesion in Reinforced Polymers by Modal Damping of Guided Acoustic Waves. In:
; 2025. doi:10.71568/DASDAGA2025.052'
apa: Claes, L., Zeipert, H., Brandes, P., Moritzer, E., & Henning, B. (2025).
Assessment of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping
of Guided Acoustic Waves. DAS | DAGA 2025 - 51st Annual Meeting on Acoustics,
Copenhagen. https://doi.org/10.71568/DASDAGA2025.052
bibtex: '@inproceedings{Claes_Zeipert_Brandes_Moritzer_Henning_2025, title={Assessment
of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping of Guided Acoustic
Waves}, DOI={10.71568/DASDAGA2025.052},
author={Claes, Leander and Zeipert, Henning and Brandes, Philipp and Moritzer,
Elmar and Henning, Bernd}, year={2025} }'
chicago: Claes, Leander, Henning Zeipert, Philipp Brandes, Elmar Moritzer, and Bernd
Henning. “Assessment of Fibre-Matrix Adhesion in Reinforced Polymers by Modal
Damping of Guided Acoustic Waves,” 2025. https://doi.org/10.71568/DASDAGA2025.052.
ieee: 'L. Claes, H. Zeipert, P. Brandes, E. Moritzer, and B. Henning, “Assessment
of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping of Guided Acoustic
Waves,” presented at the DAS | DAGA 2025 - 51st Annual Meeting on Acoustics, Copenhagen,
2025, doi: 10.71568/DASDAGA2025.052.'
mla: Claes, Leander, et al. Assessment of Fibre-Matrix Adhesion in Reinforced
Polymers by Modal Damping of Guided Acoustic Waves. 2025, doi:10.71568/DASDAGA2025.052.
short: 'L. Claes, H. Zeipert, P. Brandes, E. Moritzer, B. Henning, in: 2025.'
conference:
end_date: 2025-03-20
location: Copenhagen
name: DAS | DAGA 2025 - 51st Annual Meeting on Acoustics
start_date: 2025-03-17
date_created: 2025-04-25T08:48:10Z
date_updated: 2025-04-25T08:50:11Z
department:
- _id: '49'
- _id: '147'
doi: 10.71568/DASDAGA2025.052
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '157'
grant_number: '495847374'
name: 'FaMOUS: Ein ultraschallbasiertes Messverfahren unter Berücksichtigung viskoelastischer
Eigenschaften zur Charakterisierung der Faser-Matrix-Haftung bei Organoblechen
sowie deren realitätsnahe Modellierung'
status: public
title: Assessment of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping
of Guided Acoustic Waves
type: conference
user_id: '11829'
year: '2025'
...
---
_id: '59876'
abstract:
- lang: eng
text: 'Abstract. Clinching is a conventional mechanical joining process
used in Multi-Material Design in the automotive sector. To receive the desired
geometrical characteristics in clinch joints, correct process design is required.
To reduce the cost of finding fitting process parameters, numerical simulation
of the joining process can be used to predict the geometrical characteristics,
such as interlock, instead of an experimental approach. These numerical simulation
models consume computational resources and time. In this paper machine learning
is used to find correlations between features of the joining process and geometrical
characteristics in the joint. This serves the purpose of predicting the joint’s
target values more resource-efficiently. Modelling with machine learning requires
a structured dataset with sufficient parameter variation. To create this data
base the following procedure was used. For joining partners, a HC340LA steel alloy
with 2 mm material thickness was used punch-sided and an EN AW 5182 aluminum alloy
with 1.5 mm thickness was used die-sided. For this combination a suitable tool
combination and punch distance was experimentally identified. A finite element
model was created to reproduce the joining process. For the modelling of the material
of both joining partners flow curves determined by Vallaster et al. were used
[1]. The punch and die were recreated digitally by opto-electronic measurements
and transformed into a mesh suitable for numerical simulation. The model was validated
by comparing process values like the maximum force applied by the punch and geometrical
values in the joints cross section. Additionally, a process window for suitable
punch distances was experimentally determined. Afterwards a variation of 70 different
process designs was conducted with variants inside and outside the process window.
The results were used for training, testing and validating various machine learning
models. All models competed against each other to find the must suited model to
predict every geometric value. To ensure good model performances and prevent the
model from overfitting, a tenfold cross validation was used for validating the
models. Analysis of the results gives the following key findings: i) Good predictability
is reached for the interlock and sheet thickness of the joint. ii) Prediction
neck thickness showed low error values, but also low correlation. iii)The prediction
of those key values for evaluating clinch joint characteristics by machine learning
models positively impacts needed resources in comparison to numerical models.'
author:
- first_name: Jean-Patrick
full_name: Ludwig, Jean-Patrick
id: '76631'
last_name: Ludwig
- first_name: 'Seraphin '
full_name: 'Tsi-Nda Lontsi, Seraphin '
last_name: Tsi-Nda Lontsi
- first_name: Jonas
full_name: Neumann, Jonas
last_name: Neumann
- first_name: Lukas
full_name: Kappis, Lukas
last_name: Kappis
- first_name: 'Christian '
full_name: 'Scharr, Christian '
last_name: Scharr
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Ludwig J-P, Tsi-Nda Lontsi S, Neumann J, et al. Data driven prognosis of clinch
joints in multi-material design. In: Materials Research Proceedings. Vol
54. Materials Research Forum LLC; 2025. doi:10.21741/9781644903599-157'
apa: Ludwig, J.-P., Tsi-Nda Lontsi, S., Neumann, J., Kappis, L., Scharr, C., Flügge,
W., Merklein, M., & Meschut, G. (2025). Data driven prognosis of clinch joints
in multi-material design. Materials Research Proceedings, 54. https://doi.org/10.21741/9781644903599-157
bibtex: '@inproceedings{Ludwig_Tsi-Nda Lontsi_Neumann_Kappis_Scharr_Flügge_Merklein_Meschut_2025,
place={Paestum}, title={Data driven prognosis of clinch joints in multi-material
design}, volume={54}, DOI={10.21741/9781644903599-157},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Ludwig, Jean-Patrick and Tsi-Nda Lontsi, Seraphin and Neumann,
Jonas and Kappis, Lukas and Scharr, Christian and Flügge, Wilko and Merklein,
Marion and Meschut, Gerson}, year={2025} }'
chicago: 'Ludwig, Jean-Patrick, Seraphin Tsi-Nda Lontsi, Jonas Neumann, Lukas Kappis,
Christian Scharr, Wilko Flügge, Marion Merklein, and Gerson Meschut. “Data Driven
Prognosis of Clinch Joints in Multi-Material Design.” In Materials Research
Proceedings, Vol. 54. Paestum: Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-157.'
ieee: 'J.-P. Ludwig et al., “Data driven prognosis of clinch joints in multi-material
design,” in Materials Research Proceedings, 2025, vol. 54, doi: 10.21741/9781644903599-157.'
mla: Ludwig, Jean-Patrick, et al. “Data Driven Prognosis of Clinch Joints in Multi-Material
Design.” Materials Research Proceedings, vol. 54, Materials Research Forum
LLC, 2025, doi:10.21741/9781644903599-157.
short: 'J.-P. Ludwig, S. Tsi-Nda Lontsi, J. Neumann, L. Kappis, C. Scharr, W. Flügge,
M. Merklein, G. Meschut, in: Materials Research Proceedings, Materials Research
Forum LLC, Paestum, 2025.'
date_created: 2025-05-13T06:51:37Z
date_updated: 2025-05-13T07:20:19Z
department:
- _id: '157'
doi: 10.21741/9781644903599-157
intvolume: ' 54'
language:
- iso: eng
place: Paestum
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: Data driven prognosis of clinch joints in multi-material design
type: conference
user_id: '76631'
volume: 54
year: '2025'
...
---
_id: '59905'
abstract:
- lang: ger
text: Um die international und national beschlossenen Klimaziele zu erreichen, müssen
die verkehrsbedingten Emissionen in der Bundesrepublik Deutschland drastisch reduziert
werden. Hierzu bedarf es einer umfassenden Mobilitätswende, welche die Etablierung
emissionsärmerer und effizienterer Mobilitätsformen umfasst. Ein Lösungsansatz
können on-demand Dienste bieten, die den öffentlichen Personennahverkehr bedarfsgerecht
gestalten und so dessen Akzeptanz steigern. Zahlreiche bisher eingeführte on-demand
Dienste mussten jedoch nach Beendigung des Projekt- bzw. Förderzeitraums wieder
eingestellt werden. Maßgebliche Herausforderungen waren die Integration der Dienste
in die bestehenden ÖPNV- und Mobilitäts-Strukturen sowie teilweise damit einhergehende
ökonomische Aspekte. In diesem Beitrag wird eine Methode vorgestellt, welche neben
der Einführung neuartiger Mobilitätsdienste auch die Entwicklung eines nachhaltigen
Mobilitäts-Ökosystems anstrebt. Der Fokus liegt dabei auf ländlich geprägten Regionen
und ihren besonderen Herausforderungen im Bereich des öffentlichen Nahverkehrs.
Die Methode beschreibt ein fünf-phasiges Handlungsschema, in welchem Potenziale
bestehender Strukturen genutzt, Mobilitäts-Stakeholder eingebunden und verhärtete
Mobilitätsverhalten allmählich positiv verändert werden. Anhand der Initiative
Neue Mobilität Paderborn wird aufgezeigt, dass mithilfe der Methode erste Schritte
hin zu einem Mobilitäts-Ökosystem absolviert werden können. Darüber hinaus werden
Einführungsszenarien für die neuartige, sich noch in der Entwicklung befindliche
Mobilitätslösung NeMo.bil in einer Beispielregion erarbeitet.
author:
- first_name: Jonathan
full_name: Behm, Jonathan
last_name: Behm
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Julian
full_name: Bomm, Julian
last_name: Bomm
- first_name: Sören
full_name: Rahmann, Sören
last_name: Rahmann
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
citation:
ama: 'Behm J, Ostermann M, Bomm J, Rahmann S, Tröster T, Marten T. Einführungsstrategien
nachhaltiger on-demand Mobilitätkonzepte im öffentlichen Nahverkehr. In: New
Players in Mobility. Springer Fachmedien Wiesbaden; 2025. doi:10.1007/978-3-658-46485-1_36'
apa: Behm, J., Ostermann, M., Bomm, J., Rahmann, S., Tröster, T., & Marten,
T. (2025). Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen
Nahverkehr. In New Players in Mobility. 16. Wissenschaftsforum Mobilität,
Duisburg. Springer Fachmedien Wiesbaden. https://doi.org/10.1007/978-3-658-46485-1_36
bibtex: '@inbook{Behm_Ostermann_Bomm_Rahmann_Tröster_Marten_2025, place={Wiesbaden},
title={Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen
Nahverkehr}, DOI={10.1007/978-3-658-46485-1_36},
booktitle={New Players in Mobility}, publisher={Springer Fachmedien Wiesbaden},
author={Behm, Jonathan and Ostermann, Moritz and Bomm, Julian and Rahmann, Sören
and Tröster, Thomas and Marten, Thorsten}, year={2025} }'
chicago: 'Behm, Jonathan, Moritz Ostermann, Julian Bomm, Sören Rahmann, Thomas Tröster,
and Thorsten Marten. “Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte
im öffentlichen Nahverkehr.” In New Players in Mobility. Wiesbaden: Springer
Fachmedien Wiesbaden, 2025. https://doi.org/10.1007/978-3-658-46485-1_36.'
ieee: 'J. Behm, M. Ostermann, J. Bomm, S. Rahmann, T. Tröster, and T. Marten, “Einführungsstrategien
nachhaltiger on-demand Mobilitätkonzepte im öffentlichen Nahverkehr,” in New
Players in Mobility, Wiesbaden: Springer Fachmedien Wiesbaden, 2025.'
mla: Behm, Jonathan, et al. “Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte
im öffentlichen Nahverkehr.” New Players in Mobility, Springer Fachmedien
Wiesbaden, 2025, doi:10.1007/978-3-658-46485-1_36.
short: 'J. Behm, M. Ostermann, J. Bomm, S. Rahmann, T. Tröster, T. Marten, in: New
Players in Mobility, Springer Fachmedien Wiesbaden, Wiesbaden, 2025.'
conference:
end_date: 2024-06-13
location: Duisburg
name: 16. Wissenschaftsforum Mobilität
start_date: 2024-06-13
date_created: 2025-05-15T05:57:58Z
date_updated: 2025-05-15T06:03:45Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1007/978-3-658-46485-1_36
language:
- iso: ger
place: Wiesbaden
publication: New Players in Mobility
publication_identifier:
isbn:
- '9783658464844'
- '9783658464851'
publication_status: published
publisher: Springer Fachmedien Wiesbaden
status: public
title: Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen
Nahverkehr
type: book_chapter
user_id: '44763'
year: '2025'
...
---
_id: '60040'
article_number: '147787'
author:
- first_name: Nina
full_name: Pfeffer, Nina
last_name: Pfeffer
- first_name: Stefanie Nicole
full_name: Jäger, Stefanie Nicole
last_name: Jäger
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Andreas
full_name: Stark, Andreas
last_name: Stark
- first_name: Heinz Werner
full_name: Höppel, Heinz Werner
last_name: Höppel
citation:
ama: 'Pfeffer N, Jäger SN, Kaiser MA, Meyer T, Stark A, Höppel HW. Enhancing mechanical
strength of Ti-6Al-4V sheet material by short-time sub-β-transus solution heat
treatment and additional short-time annealing. Materials Science and Engineering:
A. 2025;926. doi:10.1016/j.msea.2025.147787'
apa: 'Pfeffer, N., Jäger, S. N., Kaiser, M. A., Meyer, T., Stark, A., & Höppel,
H. W. (2025). Enhancing mechanical strength of Ti-6Al-4V sheet material by short-time
sub-β-transus solution heat treatment and additional short-time annealing. Materials
Science and Engineering: A, 926, Article 147787. https://doi.org/10.1016/j.msea.2025.147787'
bibtex: '@article{Pfeffer_Jäger_Kaiser_Meyer_Stark_Höppel_2025, title={Enhancing
mechanical strength of Ti-6Al-4V sheet material by short-time sub-β-transus solution
heat treatment and additional short-time annealing}, volume={926}, DOI={10.1016/j.msea.2025.147787},
number={147787}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Pfeffer, Nina and Jäger, Stefanie Nicole and Kaiser, Maximilian Alexander
and Meyer, Thomas and Stark, Andreas and Höppel, Heinz Werner}, year={2025} }'
chicago: 'Pfeffer, Nina, Stefanie Nicole Jäger, Maximilian Alexander Kaiser, Thomas
Meyer, Andreas Stark, and Heinz Werner Höppel. “Enhancing Mechanical Strength
of Ti-6Al-4V Sheet Material by Short-Time Sub-β-Transus Solution Heat Treatment
and Additional Short-Time Annealing.” Materials Science and Engineering: A
926 (2025). https://doi.org/10.1016/j.msea.2025.147787.'
ieee: 'N. Pfeffer, S. N. Jäger, M. A. Kaiser, T. Meyer, A. Stark, and H. W. Höppel,
“Enhancing mechanical strength of Ti-6Al-4V sheet material by short-time sub-β-transus
solution heat treatment and additional short-time annealing,” Materials Science
and Engineering: A, vol. 926, Art. no. 147787, 2025, doi: 10.1016/j.msea.2025.147787.'
mla: 'Pfeffer, Nina, et al. “Enhancing Mechanical Strength of Ti-6Al-4V Sheet Material
by Short-Time Sub-β-Transus Solution Heat Treatment and Additional Short-Time
Annealing.” Materials Science and Engineering: A, vol. 926, 147787, Elsevier
BV, 2025, doi:10.1016/j.msea.2025.147787.'
short: 'N. Pfeffer, S.N. Jäger, M.A. Kaiser, T. Meyer, A. Stark, H.W. Höppel, Materials
Science and Engineering: A 926 (2025).'
date_created: 2025-05-27T05:39:31Z
date_updated: 2025-05-27T05:56:52Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.msea.2025.147787
intvolume: ' 926'
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
status: public
title: Enhancing mechanical strength of Ti-6Al-4V sheet material by short-time sub-β-transus
solution heat treatment and additional short-time annealing
type: journal_article
user_id: '72351'
volume: 926
year: '2025'
...
---
_id: '59908'
author:
- first_name: Karina
full_name: Gevers, Karina
id: '83151'
last_name: Gevers
citation:
ama: Gevers K. Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden .
Shaker Verlag; 2025.
apa: Gevers, K. (2025). Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Shaker Verlag.
bibtex: '@book{Gevers_2025, place={Düren}, series={Schriftenreihe Kunststofftechnik
Paderborn }, title={Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
}, publisher={Shaker Verlag}, author={Gevers, Karina}, year={2025}, collection={Schriftenreihe
Kunststofftechnik Paderborn } }'
chicago: 'Gevers, Karina. Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Schriftenreihe Kunststofftechnik Paderborn . Düren: Shaker Verlag, 2025.'
ieee: 'K. Gevers, Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Düren: Shaker Verlag, 2025.'
mla: Gevers, Karina. Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Shaker Verlag, 2025.
short: K. Gevers, Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden ,
Shaker Verlag, Düren, 2025.
date_created: 2025-05-15T09:59:23Z
date_updated: 2025-05-28T15:59:35Z
department:
- _id: '148'
- _id: '9'
- _id: '321'
extern: '1'
keyword:
- Infrarotschweißen
- Zeitfestigkeit
- Polyamide
language:
- iso: ger
page: '216'
place: Düren
publication_identifier:
isbn:
- '978-3-8440-9978-2 '
publication_status: published
publisher: Shaker Verlag
series_title: 'Schriftenreihe Kunststofftechnik Paderborn '
status: public
title: 'Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden '
type: dissertation
user_id: '83151'
year: '2025'
...
---
_id: '60108'
abstract:
- lang: eng
text: Abstract. In the field of mechanical engineering, destructive tests
such as shear tests of mechanical joints are usually followed by imaging methods
such as microsectioning or computed tomography (CT). They can help to interpret
the measured load-displacement curves, analyze the failure behavior and validate
numerical models. However, due to unloading, springback effects and crack closures
can occur, which influence the state of the investigated specimen. In this context,
in situ CT is able to explore the testing process with a specimen under load avoiding
these influences. For in situ CT investigations, the displacement increase is
interrupted at certain stop points. While the displacement is kept constant, the
CT scan is performed. However, it was observed that the reaction force reduces
during CT scanning, e. g. due to settling effects in the test setup. Although
in situ CT is established now in research, little attention is paid to the uncertainties
which arise from the discontinuous testing procedure. This study systematically
explores the impact of these interruptions on the load-displacement behavior and
the geometry of clinch points during tensile shear testing. To quantify the influence
of the interruptions, loads at defined displacement levels and the final geometry
are evaluated statistically. We found, that the load-displacement behavior of
both test groups is similar. Despite some small but significant statistical deviations
of the loads and the final geometry, our results show that, discontinuous testing
has a high level of significance for the phenomena overserved in shear tests with
clinch points.
author:
- first_name: D.
full_name: Köhler, D.
last_name: Köhler
- first_name: J
full_name: Troschitz, J
last_name: Troschitz
- first_name: R.
full_name: Kupfer, R.
last_name: Kupfer
- first_name: M.
full_name: Gude, M.
last_name: Gude
citation:
ama: 'Köhler D, Troschitz J, Kupfer R, Gude M. In situ computed tomography – Analysis
of settling effects during single-lap shear tests with clinch points. In: Materials
Research Proceedings. Vol 52. Materials Research Forum LLC; 2025. doi:10.21741/9781644903551-15'
apa: Köhler, D., Troschitz, J., Kupfer, R., & Gude, M. (2025). In situ computed
tomography – Analysis of settling effects during single-lap shear tests with clinch
points. Materials Research Proceedings, 52. https://doi.org/10.21741/9781644903551-15
bibtex: '@inproceedings{Köhler_Troschitz_Kupfer_Gude_2025, title={In situ computed
tomography – Analysis of settling effects during single-lap shear tests with clinch
points}, volume={52}, DOI={10.21741/9781644903551-15},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Köhler, D. and Troschitz, J and Kupfer, R. and Gude, M.}, year={2025}
}'
chicago: Köhler, D., J Troschitz, R. Kupfer, and M. Gude. “In Situ Computed Tomography
– Analysis of Settling Effects during Single-Lap Shear Tests with Clinch Points.”
In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC,
2025. https://doi.org/10.21741/9781644903551-15.
ieee: 'D. Köhler, J. Troschitz, R. Kupfer, and M. Gude, “In situ computed tomography
– Analysis of settling effects during single-lap shear tests with clinch points,”
in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-15.'
mla: Köhler, D., et al. “In Situ Computed Tomography – Analysis of Settling Effects
during Single-Lap Shear Tests with Clinch Points.” Materials Research Proceedings,
vol. 52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-15.
short: 'D. Köhler, J. Troschitz, R. Kupfer, M. Gude, in: Materials Research Proceedings,
Materials Research Forum LLC, 2025.'
date_created: 2025-06-02T20:05:01Z
date_updated: 2025-06-02T20:18:20Z
department:
- _id: '157'
- _id: '43'
doi: 10.21741/9781644903551-15
intvolume: ' 52'
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: In situ computed tomography – Analysis of settling effects during single-lap
shear tests with clinch points
type: conference
user_id: '83408'
volume: 52
year: '2025'
...
---
_id: '60081'
article_number: '119763'
author:
- first_name: Marius
full_name: Naumann, Marius
id: '94950'
last_name: Naumann
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Nadja
full_name: Buchenau, Nadja
last_name: Buchenau
- first_name: Jannik
full_name: Oetzel, Jannik
last_name: Oetzel
- first_name: Florian
full_name: Schlosser, Florian
id: '88614'
last_name: Schlosser
- first_name: Henning
full_name: Meschede, Henning
id: '86954'
last_name: Meschede
orcid: 0000-0002-1538-089X
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Naumann M, Ostermann M, Buchenau N, et al. Energy efficiency improvement for
decarbonization in manufacturing industry: A review. Energy Conversion and
Management. 2025;338. doi:10.1016/j.enconman.2025.119763'
apa: 'Naumann, M., Ostermann, M., Buchenau, N., Oetzel, J., Schlosser, F., Meschede,
H., & Tröster, T. (2025). Energy efficiency improvement for decarbonization
in manufacturing industry: A review. Energy Conversion and Management,
338, Article 119763. https://doi.org/10.1016/j.enconman.2025.119763'
bibtex: '@article{Naumann_Ostermann_Buchenau_Oetzel_Schlosser_Meschede_Tröster_2025,
title={Energy efficiency improvement for decarbonization in manufacturing industry:
A review}, volume={338}, DOI={10.1016/j.enconman.2025.119763},
number={119763}, journal={Energy Conversion and Management}, publisher={Elsevier
BV}, author={Naumann, Marius and Ostermann, Moritz and Buchenau, Nadja and Oetzel,
Jannik and Schlosser, Florian and Meschede, Henning and Tröster, Thomas}, year={2025}
}'
chicago: 'Naumann, Marius, Moritz Ostermann, Nadja Buchenau, Jannik Oetzel, Florian
Schlosser, Henning Meschede, and Thomas Tröster. “Energy Efficiency Improvement
for Decarbonization in Manufacturing Industry: A Review.” Energy Conversion
and Management 338 (2025). https://doi.org/10.1016/j.enconman.2025.119763.'
ieee: 'M. Naumann et al., “Energy efficiency improvement for decarbonization
in manufacturing industry: A review,” Energy Conversion and Management,
vol. 338, Art. no. 119763, 2025, doi: 10.1016/j.enconman.2025.119763.'
mla: 'Naumann, Marius, et al. “Energy Efficiency Improvement for Decarbonization
in Manufacturing Industry: A Review.” Energy Conversion and Management,
vol. 338, 119763, Elsevier BV, 2025, doi:10.1016/j.enconman.2025.119763.'
short: M. Naumann, M. Ostermann, N. Buchenau, J. Oetzel, F. Schlosser, H. Meschede,
T. Tröster, Energy Conversion and Management 338 (2025).
date_created: 2025-05-31T15:23:52Z
date_updated: 2025-06-06T07:49:35Z
department:
- _id: '644'
- _id: '9'
- _id: '149'
- _id: '321'
doi: 10.1016/j.enconman.2025.119763
intvolume: ' 338'
language:
- iso: eng
publication: Energy Conversion and Management
publication_identifier:
issn:
- 0196-8904
publication_status: published
publisher: Elsevier BV
status: public
title: 'Energy efficiency improvement for decarbonization in manufacturing industry:
A review'
type: journal_article
user_id: '15952'
volume: 338
year: '2025'
...
---
_id: '59261'
author:
- first_name: Sebastian
full_name: Magerkohl, Sebastian
id: '28520'
last_name: Magerkohl
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
citation:
ama: 'Magerkohl S, Magyar B. The Role or Rule of the Development Methodology for
Additive Manufacturing. In: Lachmayer R, Oel M, Kaierle S, eds. Innovative
Produktentwicklung durch additive Fertigung. Springer Berlin Heidelberg; 2025.
doi:10.1007/978-3-662-69327-8'
apa: Magerkohl, S., & Magyar, B. (2025). The Role or Rule of the Development
Methodology for Additive Manufacturing. In R. Lachmayer, M. Oel, & S. Kaierle
(Eds.), Innovative Produktentwicklung durch additive Fertigung. Springer
Berlin Heidelberg. https://doi.org/10.1007/978-3-662-69327-8
bibtex: '@inbook{Magerkohl_Magyar_2025, place={Berlin, Heidelberg}, title={The Role
or Rule of the Development Methodology for Additive Manufacturing}, DOI={10.1007/978-3-662-69327-8},
booktitle={Innovative Produktentwicklung durch additive Fertigung}, publisher={Springer
Berlin Heidelberg}, author={Magerkohl, Sebastian and Magyar, Balázs}, editor={Lachmayer,
Roland and Oel, Marcus and Kaierle, Stefan}, year={2025} }'
chicago: 'Magerkohl, Sebastian, and Balázs Magyar. “The Role or Rule of the Development
Methodology for Additive Manufacturing.” In Innovative Produktentwicklung durch
additive Fertigung, edited by Roland Lachmayer, Marcus Oel, and Stefan Kaierle.
Berlin, Heidelberg: Springer Berlin Heidelberg, 2025. https://doi.org/10.1007/978-3-662-69327-8.'
ieee: 'S. Magerkohl and B. Magyar, “The Role or Rule of the Development Methodology
for Additive Manufacturing,” in Innovative Produktentwicklung durch additive
Fertigung, R. Lachmayer, M. Oel, and S. Kaierle, Eds. Berlin, Heidelberg:
Springer Berlin Heidelberg, 2025.'
mla: Magerkohl, Sebastian, and Balázs Magyar. “The Role or Rule of the Development
Methodology for Additive Manufacturing.” Innovative Produktentwicklung durch
additive Fertigung, edited by Roland Lachmayer et al., Springer Berlin Heidelberg,
2025, doi:10.1007/978-3-662-69327-8.
short: 'S. Magerkohl, B. Magyar, in: R. Lachmayer, M. Oel, S. Kaierle (Eds.), Innovative
Produktentwicklung durch additive Fertigung, Springer Berlin Heidelberg, Berlin,
Heidelberg, 2025.'
date_created: 2025-04-02T13:53:19Z
date_updated: 2026-01-14T11:58:39Z
department:
- _id: '146'
doi: 10.1007/978-3-662-69327-8
editor:
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
- first_name: Marcus
full_name: Oel, Marcus
last_name: Oel
- first_name: Stefan
full_name: Kaierle, Stefan
last_name: Kaierle
language:
- iso: ger
place: Berlin, Heidelberg
publication: Innovative Produktentwicklung durch additive Fertigung
publication_identifier:
isbn:
- '9783662693261'
- '9783662693278'
publication_status: published
publisher: Springer Berlin Heidelberg
quality_controlled: '1'
status: public
title: The Role or Rule of the Development Methodology for Additive Manufacturing
type: book_chapter
user_id: '97759'
year: '2025'
...
---
_id: '60017'
article_type: original
author:
- first_name: Alexander Marcus
full_name: Skolik, Alexander Marcus
id: '92908'
last_name: Skolik
orcid: 0009-0006-2519-1765
- first_name: Philipp
full_name: zur Heiden, Philipp
id: '64394'
last_name: zur Heiden
- first_name: Johannes Aurelius Tamino
full_name: Donner, Johannes Aurelius Tamino
id: '72054'
last_name: Donner
orcid: 0009-0007-4757-4393
- first_name: Jennifer
full_name: Priefer, Jennifer
id: '82872'
last_name: Priefer
citation:
ama: 'Skolik AM, zur Heiden P, Donner JAT, Priefer J. Igniting Knowledge Management
for Assistance Systems in Maintenance: A Method for Knowledge Gathering. ECIS
2025 Proceedings. 2.'
apa: 'Skolik, A. M., zur Heiden, P., Donner, J. A. T., & Priefer, J. (n.d.).
Igniting Knowledge Management for Assistance Systems in Maintenance: A Method
for Knowledge Gathering. ECIS 2025 Proceedings, 2.'
bibtex: '@article{Skolik_zur Heiden_Donner_Priefer, title={Igniting Knowledge Management
for Assistance Systems in Maintenance: A Method for Knowledge Gathering}, volume={2},
journal={ECIS 2025 Proceedings}, author={Skolik, Alexander Marcus and zur Heiden,
Philipp and Donner, Johannes Aurelius Tamino and Priefer, Jennifer} }'
chicago: 'Skolik, Alexander Marcus, Philipp zur Heiden, Johannes Aurelius Tamino
Donner, and Jennifer Priefer. “Igniting Knowledge Management for Assistance Systems
in Maintenance: A Method for Knowledge Gathering.” ECIS 2025 Proceedings
2 (n.d.).'
ieee: 'A. M. Skolik, P. zur Heiden, J. A. T. Donner, and J. Priefer, “Igniting Knowledge
Management for Assistance Systems in Maintenance: A Method for Knowledge Gathering,”
ECIS 2025 Proceedings, vol. 2.'
mla: 'Skolik, Alexander Marcus, et al. “Igniting Knowledge Management for Assistance
Systems in Maintenance: A Method for Knowledge Gathering.” ECIS 2025 Proceedings,
vol. 2.'
short: A.M. Skolik, P. zur Heiden, J.A.T. Donner, J. Priefer, ECIS 2025 Proceedings
2 (n.d.).
conference:
location: Amman, Jordan
name: Thirty-Third European Conference on Information Systems (ECIS 2025)
date_created: 2025-05-22T09:17:51Z
date_updated: 2026-01-29T15:27:30Z
ddc:
- '006'
department:
- _id: '876'
- _id: '321'
- _id: '526'
- _id: '534'
file:
- access_level: open_access
content_type: application/pdf
creator: askolik
date_created: 2026-01-15T15:21:39Z
date_updated: 2026-01-29T15:27:29Z
file_id: '63634'
file_name: Igniting Knowledge Management for Assistance Systems in Maintenance.pdf
file_size: 721701
relation: main_file
file_date_updated: 2026-01-29T15:27:29Z
has_accepted_license: '1'
intvolume: ' 2'
language:
- iso: eng
main_file_link:
- url: https://aisel.aisnet.org/ecis2025/ent_system/ent_system/2/
oa: '1'
publication: ECIS 2025 Proceedings
publication_status: accepted
quality_controlled: '1'
status: public
title: 'Igniting Knowledge Management for Assistance Systems in Maintenance: A Method
for Knowledge Gathering'
type: journal_article
user_id: '92908'
volume: 2
year: '2025'
...
---
_id: '63839'
author:
- first_name: Julian
full_name: Gilich, Julian
id: '44391'
last_name: Gilich
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Felix
full_name: Wiebicke, Felix
last_name: Wiebicke
- first_name: Ilja
full_name: Koch, Ilja
last_name: Koch
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Gilich J, Meschut G, Gröger B, Wiebicke F, Koch I, Gude M. Experimentelle
und numerische Analyse des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess. In: 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik.
; 2025.'
apa: 'Gilich, J., Meschut, G., Gröger, B., Wiebicke, F., Koch, I., & Gude, M.
(2025). Experimentelle und numerische Analyse des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess. 25. Kolloquium: Gemeinsame Forschung
in der Klebtechnik. 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik,
Köln.'
bibtex: '@inproceedings{Gilich_Meschut_Gröger_Wiebicke_Koch_Gude_2025, title={Experimentelle
und numerische Analyse des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess}, booktitle={25. Kolloquium: Gemeinsame Forschung in der
Klebtechnik}, author={Gilich, Julian and Meschut, Gerson and Gröger, Benjamin
and Wiebicke, Felix and Koch, Ilja and Gude, Maik}, year={2025} }'
chicago: 'Gilich, Julian, Gerson Meschut, Benjamin Gröger, Felix Wiebicke, Ilja
Koch, and Maik Gude. “Experimentelle und numerische Analyse des Fließverhaltens
von hochviskosen Wärmeleitstoffen im Fertigungsprozess.” In 25. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, 2025.'
ieee: 'J. Gilich, G. Meschut, B. Gröger, F. Wiebicke, I. Koch, and M. Gude, “Experimentelle
und numerische Analyse des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess,” presented at the 25. Kolloquium: Gemeinsame Forschung in
der Klebtechnik, Köln, 2025.'
mla: 'Gilich, Julian, et al. “Experimentelle und numerische Analyse des Fließverhaltens
von hochviskosen Wärmeleitstoffen im Fertigungsprozess.” 25. Kolloquium: Gemeinsame
Forschung in der Klebtechnik, 2025.'
short: 'J. Gilich, G. Meschut, B. Gröger, F. Wiebicke, I. Koch, M. Gude, in: 25.
Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2025.'
conference:
end_date: 2025-02-19
location: Köln
name: '25. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2025-02-18
date_created: 2026-02-03T07:26:32Z
date_updated: 2026-02-03T07:26:45Z
department:
- _id: '157'
language:
- iso: ger
publication: '25. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Experimentelle und numerische Analyse des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess
type: conference_abstract
user_id: '44391'
year: '2025'
...
---
_id: '60834'
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Philipp
full_name: Jung, Philipp
last_name: Jung
- first_name: Christian
full_name: Bödger, Christian
id: '93904'
last_name: Bödger
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ott M, Jung P, Bödger C, Mozgova I, Koch R, Tröster T. Fused Deposition Modeling
and its Extension Through Metal-Filled Filaments as a Means of Self-Help for Individuals
with Physical Disabilities. In: Lachmayer R, Kaierle S, Oel M, eds. Innovative
Produktentwicklung Durch Additive Fertigung. ; 2025:117-127. doi:doi.org/10.1007/978-3-662-69327-8'
apa: Ott, M., Jung, P., Bödger, C., Mozgova, I., Koch, R., & Tröster, T. (2025).
Fused Deposition Modeling and its Extension Through Metal-Filled Filaments as
a Means of Self-Help for Individuals with Physical Disabilities. In R. Lachmayer,
S. Kaierle, & M. Oel (Eds.), Innovative Produktentwicklung durch additive
Fertigung (pp. 117–127). https://doi.org/doi.org/10.1007/978-3-662-69327-8
bibtex: '@inbook{Ott_Jung_Bödger_Mozgova_Koch_Tröster_2025, title={Fused Deposition
Modeling and its Extension Through Metal-Filled Filaments as a Means of Self-Help
for Individuals with Physical Disabilities}, DOI={doi.org/10.1007/978-3-662-69327-8},
booktitle={Innovative Produktentwicklung durch additive Fertigung}, author={Ott,
Manuel and Jung, Philipp and Bödger, Christian and Mozgova, Iryna and Koch, Rainer
and Tröster, Thomas}, editor={Lachmayer, Roland and Kaierle, Stefan and Oel, Marcus},
year={2025}, pages={117–127} }'
chicago: Ott, Manuel, Philipp Jung, Christian Bödger, Iryna Mozgova, Rainer Koch,
and Thomas Tröster. “Fused Deposition Modeling and Its Extension Through Metal-Filled
Filaments as a Means of Self-Help for Individuals with Physical Disabilities.”
In Innovative Produktentwicklung Durch Additive Fertigung, edited by Roland
Lachmayer, Stefan Kaierle, and Marcus Oel, 117–27, 2025. https://doi.org/doi.org/10.1007/978-3-662-69327-8.
ieee: M. Ott, P. Jung, C. Bödger, I. Mozgova, R. Koch, and T. Tröster, “Fused Deposition
Modeling and its Extension Through Metal-Filled Filaments as a Means of Self-Help
for Individuals with Physical Disabilities,” in Innovative Produktentwicklung
durch additive Fertigung, R. Lachmayer, S. Kaierle, and M. Oel, Eds. 2025,
pp. 117–127.
mla: Ott, Manuel, et al. “Fused Deposition Modeling and Its Extension Through Metal-Filled
Filaments as a Means of Self-Help for Individuals with Physical Disabilities.”
Innovative Produktentwicklung Durch Additive Fertigung, edited by Roland
Lachmayer et al., 2025, pp. 117–27, doi:doi.org/10.1007/978-3-662-69327-8.
short: 'M. Ott, P. Jung, C. Bödger, I. Mozgova, R. Koch, T. Tröster, in: R. Lachmayer,
S. Kaierle, M. Oel (Eds.), Innovative Produktentwicklung Durch Additive Fertigung,
2025, pp. 117–127.'
date_created: 2025-07-30T10:31:49Z
date_updated: 2026-02-06T10:46:35Z
department:
- _id: '741'
- _id: '144'
- _id: '149'
doi: doi.org/10.1007/978-3-662-69327-8
editor:
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
- first_name: Stefan
full_name: Kaierle, Stefan
last_name: Kaierle
- first_name: Marcus
full_name: Oel, Marcus
last_name: Oel
language:
- iso: eng
page: 117-127
publication: Innovative Produktentwicklung durch additive Fertigung
publication_identifier:
eisbn:
- 978-3-662-69327-8
publication_status: published
quality_controlled: '1'
status: public
title: Fused Deposition Modeling and its Extension Through Metal-Filled Filaments
as a Means of Self-Help for Individuals with Physical Disabilities
type: book_chapter
user_id: '95903'
year: '2025'
...
---
_id: '64173'
author:
- first_name: Marcel
full_name: Heitmann, Marcel
id: '38072'
last_name: Heitmann
orcid: 0009-0002-4181-8928
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Heitmann M, Meschut G. Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage .; 2025.
apa: Heitmann, M., & Meschut, G. (2025). Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage .
bibtex: '@book{Heitmann_Meschut_2025, title={Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage }, author={Heitmann, Marcel and Meschut, Gerson}, year={2025}
}'
chicago: Heitmann, Marcel, and Gerson Meschut. Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage , 2025.
ieee: M. Heitmann and G. Meschut, Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage . 2025.
mla: Heitmann, Marcel, and Gerson Meschut. Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage . 2025.
short: M. Heitmann, G. Meschut, Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage , 2025.
date_created: 2026-02-16T12:22:03Z
date_updated: 2026-02-16T12:22:11Z
department:
- _id: '157'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-96780-210-8
status: public
title: 'Verfahrenserweiterung des Widerstandselementschweißens für stahlintensive
Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten in Mittel- und
Basislage '
type: report
user_id: '38072'
year: '2025'
...
---
_id: '63437'
author:
- first_name: Johanna
full_name: Beckmann, Johanna
id: '82882'
last_name: Beckmann
- first_name: Andre
full_name: Bachmann, Andre
last_name: Bachmann
- first_name: Philipp
full_name: Brandes, Philipp
id: '70091'
last_name: Brandes
orcid: 0009-0005-9707-0885
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
citation:
ama: 'Beckmann J, Bachmann A, Brandes P, Marten T, Tröster T, Moritzer E. Validation
of Possible Applications of Flake Laminates for Recycling of PA6-CF Production
Scrap. In: 24th International Conference on Composite Materials (ICCM24).
The University of Delaware; 2025. doi:https://doi.org/10.5281/zenodo.18597865'
apa: Beckmann, J., Bachmann, A., Brandes, P., Marten, T., Tröster, T., & Moritzer,
E. (2025). Validation of Possible Applications of Flake Laminates for Recycling
of PA6-CF Production Scrap. 24th International Conference on Composite Materials
(ICCM24). https://doi.org/10.5281/zenodo.18597865
bibtex: '@inproceedings{Beckmann_Bachmann_Brandes_Marten_Tröster_Moritzer_2025,
title={Validation of Possible Applications of Flake Laminates for Recycling of
PA6-CF Production Scrap}, DOI={https://doi.org/10.5281/zenodo.18597865},
booktitle={24th International Conference on Composite Materials (ICCM24)}, publisher={The
University of Delaware}, author={Beckmann, Johanna and Bachmann, Andre and Brandes,
Philipp and Marten, Thorsten and Tröster, Thomas and Moritzer, Elmar}, year={2025}
}'
chicago: Beckmann, Johanna, Andre Bachmann, Philipp Brandes, Thorsten Marten, Thomas
Tröster, and Elmar Moritzer. “Validation of Possible Applications of Flake Laminates
for Recycling of PA6-CF Production Scrap.” In 24th International Conference
on Composite Materials (ICCM24). The University of Delaware, 2025. https://doi.org/10.5281/zenodo.18597865.
ieee: 'J. Beckmann, A. Bachmann, P. Brandes, T. Marten, T. Tröster, and E. Moritzer,
“Validation of Possible Applications of Flake Laminates for Recycling of PA6-CF
Production Scrap,” 2025, doi: https://doi.org/10.5281/zenodo.18597865.'
mla: Beckmann, Johanna, et al. “Validation of Possible Applications of Flake Laminates
for Recycling of PA6-CF Production Scrap.” 24th International Conference on
Composite Materials (ICCM24), The University of Delaware, 2025, doi:https://doi.org/10.5281/zenodo.18597865.
short: 'J. Beckmann, A. Bachmann, P. Brandes, T. Marten, T. Tröster, E. Moritzer,
in: 24th International Conference on Composite Materials (ICCM24), The University
of Delaware, 2025.'
date_created: 2026-01-05T08:42:54Z
date_updated: 2026-02-16T14:47:34Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: https://doi.org/10.5281/zenodo.18597865
keyword:
- Faser-Kunststoff-Verbunde (FKV)
- Faserverstärkte Kunststoffe (FVK)
- Organobleche
language:
- iso: eng
publication: 24th International Conference on Composite Materials (ICCM24)
publisher: The University of Delaware
status: public
title: Validation of Possible Applications of Flake Laminates for Recycling of PA6-CF
Production Scrap
type: conference
user_id: '82882'
year: '2025'
...
---
_id: '64188'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julian
full_name: Gilich, Julian
id: '44391'
last_name: Gilich
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Ilja
full_name: Koch, Ilja
last_name: Koch
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Felix
full_name: Wiebicke, Felix
last_name: Wiebicke
citation:
ama: Meschut G, Gilich J, Gude M, Koch I, Gröger B, Wiebicke F. Experimentelle
Und Numerische Untersuchung Des Fließverhaltens von Hochviskosen Wärmeleitstoffen
Im Fertigungsprozess. Vol 391. Forschungsvereinigung Automobiltechnik e.V.;
2025.
apa: Meschut, G., Gilich, J., Gude, M., Koch, I., Gröger, B., & Wiebicke, F.
(2025). Experimentelle und numerische Untersuchung des Fließverhaltens von
hochviskosen Wärmeleitstoffen im Fertigungsprozess (Vol. 391). Forschungsvereinigung
Automobiltechnik e.V.
bibtex: '@book{Meschut_Gilich_Gude_Koch_Gröger_Wiebicke_2025, place={Berlin}, series={FAT-Schriftenreihe},
title={Experimentelle und numerische Untersuchung des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess}, volume={391}, publisher={Forschungsvereinigung
Automobiltechnik e.V.}, author={Meschut, Gerson and Gilich, Julian and Gude, Maik
and Koch, Ilja and Gröger, Benjamin and Wiebicke, Felix}, year={2025}, collection={FAT-Schriftenreihe}
}'
chicago: 'Meschut, Gerson, Julian Gilich, Maik Gude, Ilja Koch, Benjamin Gröger,
and Felix Wiebicke. Experimentelle Und Numerische Untersuchung Des Fließverhaltens
von Hochviskosen Wärmeleitstoffen Im Fertigungsprozess. Vol. 391. FAT-Schriftenreihe.
Berlin: Forschungsvereinigung Automobiltechnik e.V., 2025.'
ieee: 'G. Meschut, J. Gilich, M. Gude, I. Koch, B. Gröger, and F. Wiebicke, Experimentelle
und numerische Untersuchung des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess, vol. 391. Berlin: Forschungsvereinigung Automobiltechnik
e.V., 2025.'
mla: Meschut, Gerson, et al. Experimentelle Und Numerische Untersuchung Des Fließverhaltens
von Hochviskosen Wärmeleitstoffen Im Fertigungsprozess. Forschungsvereinigung
Automobiltechnik e.V., 2025.
short: G. Meschut, J. Gilich, M. Gude, I. Koch, B. Gröger, F. Wiebicke, Experimentelle
Und Numerische Untersuchung Des Fließverhaltens von Hochviskosen Wärmeleitstoffen
Im Fertigungsprozess, Forschungsvereinigung Automobiltechnik e.V., Berlin, 2025.
date_created: 2026-02-17T13:18:21Z
date_updated: 2026-02-17T13:21:05Z
department:
- _id: '157'
intvolume: ' 391'
language:
- iso: eng
place: Berlin
publisher: Forschungsvereinigung Automobiltechnik e.V.
series_title: FAT-Schriftenreihe
status: public
title: Experimentelle und numerische Untersuchung des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess
type: book
user_id: '44391'
volume: 391
year: '2025'
...
---
_id: '58163'
abstract:
- lang: eng
text: Fibre-reinforced polymers are increasingly used due to their high specific
strength, making them suitable for local sheet metal reinforcement. This allows
improved overall mechanical properties with reduced wall thickness of the sheet
metal part and, thus, lower weight of the components. One of the main focuses
of research into such hybrid structures is on the adhesive properties and the
respective failure behaviour of the interfaces. Generally, the failure behaviour
under the influence of mechanical loads can be divided into adhesive, cohesive
and mixed-mode failure. The correlation between observed failure behaviour and
adhesion properties of the hybrid composite materials is analysed in detail in
this work. The hybrid composite consists of an aluminium sheet of the alloy EN
AW‑6082 T6 and thermoset carbon fibre-reinforced plastic (CFRP) prepreg. The aluminium
sheet was laser pretreated before hybrid production to improve the adhesion properties.
The specimens studied were produced by the prepreg pressing process, in which
the components are cured and joined simultaneously. The influences of the thickness
of the CFRP part, the layup, the fibre orientation at the boundary layer, and
the laser pretreatment parameters on the properties of the hybrid joints were
investigated.
article_type: original
author:
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Wu S, Delp A, Freund J, et al. Correlation between interlaminar shear strength
of CFRP and joint strength of aluminium-CFRP hybrid joints. The Journal of
Adhesion. Published online 2025:1-26. doi:10.1080/00218464.2024.2439956
apa: Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., &
Tröster, T. (2025). Correlation between interlaminar shear strength of CFRP and
joint strength of aluminium-CFRP hybrid joints. The Journal of Adhesion,
1–26. https://doi.org/10.1080/00218464.2024.2439956
bibtex: '@article{Wu_Delp_Freund_Walther_Haubrich_Löbbecke_Tröster_2025, title={Correlation
between interlaminar shear strength of CFRP and joint strength of aluminium-CFRP
hybrid joints}, DOI={10.1080/00218464.2024.2439956},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Wu,
Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich,
Jan and Löbbecke, Miriam and Tröster, Thomas}, year={2025}, pages={1–26} }'
chicago: Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich,
Miriam Löbbecke, and Thomas Tröster. “Correlation between Interlaminar Shear Strength
of CFRP and Joint Strength of Aluminium-CFRP Hybrid Joints.” The Journal of
Adhesion, 2025, 1–26. https://doi.org/10.1080/00218464.2024.2439956.
ieee: 'S. Wu et al., “Correlation between interlaminar shear strength of
CFRP and joint strength of aluminium-CFRP hybrid joints,” The Journal of Adhesion,
pp. 1–26, 2025, doi: 10.1080/00218464.2024.2439956.'
mla: Wu, Shuang, et al. “Correlation between Interlaminar Shear Strength of CFRP
and Joint Strength of Aluminium-CFRP Hybrid Joints.” The Journal of Adhesion,
Informa UK Limited, 2025, pp. 1–26, doi:10.1080/00218464.2024.2439956.
short: S. Wu, A. Delp, J. Freund, F. Walther, J. Haubrich, M. Löbbecke, T. Tröster,
The Journal of Adhesion (2025) 1–26.
date_created: 2025-01-13T08:16:46Z
date_updated: 2026-02-20T12:49:17Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.1080/00218464.2024.2439956
keyword:
- Prepreg pressing process
- hybrid joints
- laser surface pretreatment
- intrinsic manufacturing
- CFRP
- aluminium
- materials engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.tandfonline.com/doi/full/10.1080/00218464.2024.2439956?src=
oa: '1'
page: 1-26
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Correlation between interlaminar shear strength of CFRP and joint strength
of aluminium-CFRP hybrid joints
type: journal_article
user_id: '48039'
year: '2025'
...