---
_id: '32147'
author:
- first_name: I.
full_name: Gräßler, I.
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Daniel
full_name: Roesmann, Daniel
id: '54680'
last_name: Roesmann
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Burkhard
full_name: Corves, Burkhard
last_name: Corves
- first_name: Nils
full_name: Mandischer, Nils
last_name: Mandischer
- first_name: Marius
full_name: Gürtler, Marius
last_name: Gürtler
citation:
ama: 'Gräßler I, Roesmann D, Pottebaum J, Corves B, Mandischer N, Gürtler M. Mensch-Tracking
zur Identifizierung des Voranschreitens von Roboterunterstützten Rettungseinsätzen
der Feuerwehr. In: Tagungsband der VDI Mechatronik 2022. ; 2022:151-156.
doi:10.26083/tuprints-00020963'
apa: Gräßler, I., Roesmann, D., Pottebaum, J., Corves, B., Mandischer, N., &
Gürtler, M. (2022). Mensch-Tracking zur Identifizierung des Voranschreitens von
Roboterunterstützten Rettungseinsätzen der Feuerwehr. Tagungsband der VDI Mechatronik
2022, 151–156. https://doi.org/10.26083/tuprints-00020963
bibtex: '@inproceedings{Gräßler_Roesmann_Pottebaum_Corves_Mandischer_Gürtler_2022,
title={Mensch-Tracking zur Identifizierung des Voranschreitens von Roboterunterstützten
Rettungseinsätzen der Feuerwehr}, DOI={10.26083/tuprints-00020963},
booktitle={Tagungsband der VDI Mechatronik 2022}, author={Gräßler, I. and Roesmann,
Daniel and Pottebaum, Jens and Corves, Burkhard and Mandischer, Nils and Gürtler,
Marius}, year={2022}, pages={151–156} }'
chicago: Gräßler, I., Daniel Roesmann, Jens Pottebaum, Burkhard Corves, Nils Mandischer,
and Marius Gürtler. “Mensch-Tracking zur Identifizierung des Voranschreitens von
Roboterunterstützten Rettungseinsätzen der Feuerwehr.” In Tagungsband der VDI
Mechatronik 2022, 151–56, 2022. https://doi.org/10.26083/tuprints-00020963.
ieee: 'I. Gräßler, D. Roesmann, J. Pottebaum, B. Corves, N. Mandischer, and M. Gürtler,
“Mensch-Tracking zur Identifizierung des Voranschreitens von Roboterunterstützten
Rettungseinsätzen der Feuerwehr,” in Tagungsband der VDI Mechatronik 2022,
Darmstadt, 2022, pp. 151–156, doi: 10.26083/tuprints-00020963.'
mla: Gräßler, I., et al. “Mensch-Tracking zur Identifizierung des Voranschreitens
von Roboterunterstützten Rettungseinsätzen der Feuerwehr.” Tagungsband der
VDI Mechatronik 2022, 2022, pp. 151–56, doi:10.26083/tuprints-00020963.
short: 'I. Gräßler, D. Roesmann, J. Pottebaum, B. Corves, N. Mandischer, M. Gürtler,
in: Tagungsband der VDI Mechatronik 2022, 2022, pp. 151–156.'
conference:
end_date: '20220324'
location: Darmstadt
name: Fachtagung VDI MECHATRONIK 2022
start_date: '20220323'
date_created: 2022-06-24T07:43:50Z
date_updated: 2023-04-27T09:42:09Z
department:
- _id: '152'
doi: 10.26083/tuprints-00020963
language:
- iso: ger
page: 151-156
publication: Tagungsband der VDI Mechatronik 2022
publication_status: published
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://tuprints.ulb.tu-darmstadt.de/20963/
status: public
title: Mensch-Tracking zur Identifizierung des Voranschreitens von Roboterunterstützten
Rettungseinsätzen der Feuerwehr
type: conference
user_id: '5905'
year: '2022'
...
---
_id: '33889'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
- first_name: Christian
full_name: Oleff, Christian
id: '41188'
last_name: Oleff
orcid: 0000-0002-0983-1850
citation:
ama: 'Gräßler I, Wiechel D, Oleff C. Extended RFLP for complex technical systems.
In: ; 2022.'
apa: Gräßler, I., Wiechel, D., & Oleff, C. (2022). Extended RFLP for complex
technical systems. 8th IEEE International Symposium on Systems Engineering,
Wien.
bibtex: '@inproceedings{Gräßler_Wiechel_Oleff_2022, place={Wien}, title={Extended
RFLP for complex technical systems}, author={Gräßler, Iris and Wiechel, Dominik
and Oleff, Christian}, year={2022} }'
chicago: Gräßler, Iris, Dominik Wiechel, and Christian Oleff. “Extended RFLP for
Complex Technical Systems.” Wien, 2022.
ieee: I. Gräßler, D. Wiechel, and C. Oleff, “Extended RFLP for complex technical
systems,” presented at the 8th IEEE International Symposium on Systems Engineering,
Wien, 2022.
mla: Gräßler, Iris, et al. Extended RFLP for Complex Technical Systems. 2022.
short: 'I. Gräßler, D. Wiechel, C. Oleff, in: Wien, 2022.'
conference:
end_date: '20221026'
location: Wien
name: 8th IEEE International Symposium on Systems Engineering
start_date: '20221024'
date_created: 2022-10-26T13:25:17Z
date_updated: 2023-04-27T09:40:34Z
department:
- _id: '152'
language:
- iso: eng
place: Wien
quality_controlled: '1'
status: public
title: Extended RFLP for complex technical systems
type: conference
user_id: '5905'
year: '2022'
...
---
_id: '34224'
abstract:
- lang: eng
text: Crack growth in structures depends on the cyclic loads applied on it, such
as mechanical, thermal and contact, as well as residual stresses, etc. To provide
an accurate simulation of crack growth in structures, it is of high importance
to integrate all kinds of loading situations in the simulations. Adapcrack3D is
a simulation program that can accurately predict the propagation of cracks in
real structures. However, until now, this three-dimensional program has only considered
mechanical loads and static thermal loads. Therefore, the features of Adapcrack3D
have been extended by including contact loading in crack growth simulations. The
numerical simulation of crack propagation with Adapcrack3D is generally carried
out using FE models of structures provided by the user. For simulating models
with contact loading situations, Adapcrack3D has been updated to work with FE
models containing multiple parts and necessary features such as coupling and surface
interactions. Because Adapcrack3D uses the submodel technique for fracture mechanical
evaluations, the architecture of the submodel is also modified to simulate models
with contact definitions between the crack surfaces. This paper discusses the
newly implemented attribute of the program with the help of illustrative examples.
The results confirm that the contact simulation in Adapcrack3D is a major step
in improving the functionality of the program.
article_number: '7557'
author:
- first_name: Tintu David
full_name: Joy, Tintu David
id: '30821'
last_name: Joy
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
citation:
ama: Joy TD, Weiß D, Schramm B, Kullmer G. Further Development of 3D Crack Growth
Simulation Program to Include Contact Loading Situations. Applied Sciences.
2022;12(15). doi:10.3390/app12157557
apa: Joy, T. D., Weiß, D., Schramm, B., & Kullmer, G. (2022). Further Development
of 3D Crack Growth Simulation Program to Include Contact Loading Situations. Applied
Sciences, 12(15), Article 7557. https://doi.org/10.3390/app12157557
bibtex: '@article{Joy_Weiß_Schramm_Kullmer_2022, title={Further Development of 3D
Crack Growth Simulation Program to Include Contact Loading Situations}, volume={12},
DOI={10.3390/app12157557}, number={157557},
journal={Applied Sciences}, publisher={MDPI AG}, author={Joy, Tintu David and
Weiß, Deborah and Schramm, Britta and Kullmer, Gunter}, year={2022} }'
chicago: Joy, Tintu David, Deborah Weiß, Britta Schramm, and Gunter Kullmer. “Further
Development of 3D Crack Growth Simulation Program to Include Contact Loading Situations.”
Applied Sciences 12, no. 15 (2022). https://doi.org/10.3390/app12157557.
ieee: 'T. D. Joy, D. Weiß, B. Schramm, and G. Kullmer, “Further Development of 3D
Crack Growth Simulation Program to Include Contact Loading Situations,” Applied
Sciences, vol. 12, no. 15, Art. no. 7557, 2022, doi: 10.3390/app12157557.'
mla: Joy, Tintu David, et al. “Further Development of 3D Crack Growth Simulation
Program to Include Contact Loading Situations.” Applied Sciences, vol.
12, no. 15, 7557, MDPI AG, 2022, doi:10.3390/app12157557.
short: T.D. Joy, D. Weiß, B. Schramm, G. Kullmer, Applied Sciences 12 (2022).
date_created: 2022-12-05T21:49:48Z
date_updated: 2023-04-27T10:13:44Z
department:
- _id: '143'
doi: 10.3390/app12157557
intvolume: ' 12'
issue: '15'
keyword:
- Fluid Flow and Transfer Processes
- Computer Science Applications
- Process Chemistry and Technology
- General Engineering
- Instrumentation
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
publication: Applied Sciences
publication_identifier:
issn:
- 2076-3417
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Further Development of 3D Crack Growth Simulation Program to Include Contact
Loading Situations
type: journal_article
user_id: '45673'
volume: 12
year: '2022'
...
---
_id: '30726'
author:
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
citation:
ama: 'Weiß D, Schramm B, Kullmer G. Influence of plane mixed-mode loading on the
kinking angle of clinchable metal sheets. In: Procedia Structural Integrity.
Vol 39. Elsevier BV; 2022:139-147. doi:10.1016/j.prostr.2022.03.082'
apa: Weiß, D., Schramm, B., & Kullmer, G. (2022). Influence of plane mixed-mode
loading on the kinking angle of clinchable metal sheets. Procedia Structural
Integrity, 39, 139–147. https://doi.org/10.1016/j.prostr.2022.03.082
bibtex: '@inproceedings{Weiß_Schramm_Kullmer_2022, title={Influence of plane mixed-mode
loading on the kinking angle of clinchable metal sheets}, volume={39}, DOI={10.1016/j.prostr.2022.03.082},
booktitle={Procedia Structural Integrity}, publisher={Elsevier BV}, author={Weiß,
Deborah and Schramm, Britta and Kullmer, Gunter}, year={2022}, pages={139–147}
}'
chicago: Weiß, Deborah, Britta Schramm, and Gunter Kullmer. “Influence of Plane
Mixed-Mode Loading on the Kinking Angle of Clinchable Metal Sheets.” In Procedia
Structural Integrity, 39:139–47. Elsevier BV, 2022. https://doi.org/10.1016/j.prostr.2022.03.082.
ieee: 'D. Weiß, B. Schramm, and G. Kullmer, “Influence of plane mixed-mode loading
on the kinking angle of clinchable metal sheets,” in Procedia Structural Integrity,
online, 2022, vol. 39, pp. 139–147, doi: 10.1016/j.prostr.2022.03.082.'
mla: Weiß, Deborah, et al. “Influence of Plane Mixed-Mode Loading on the Kinking
Angle of Clinchable Metal Sheets.” Procedia Structural Integrity, vol.
39, Elsevier BV, 2022, pp. 139–47, doi:10.1016/j.prostr.2022.03.082.
short: 'D. Weiß, B. Schramm, G. Kullmer, in: Procedia Structural Integrity, Elsevier
BV, 2022, pp. 139–147.'
conference:
end_date: 2021-09-24
location: online
name: 7th International Conference on Crack Paths
start_date: 2021-09-21
date_created: 2022-03-30T08:34:10Z
date_updated: 2023-04-27T10:17:21Z
department:
- _id: '143'
doi: 10.1016/j.prostr.2022.03.082
intvolume: ' 39'
keyword:
- General Engineering
- Energy Engineering and Power Technology
language:
- iso: eng
page: 139-147
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
publication: Procedia Structural Integrity
publication_identifier:
issn:
- 2452-3216
publication_status: published
publisher: Elsevier BV
status: public
title: Influence of plane mixed-mode loading on the kinking angle of clinchable metal
sheets
type: conference
user_id: '45673'
volume: 39
year: '2022'
...
---
_id: '34246'
article_number: '108899'
author:
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
citation:
ama: Kullmer G, Weiß D, Schramm B. Development of a method for the separate measurement
of the growth of internal crack tips by means of the potential drop method. Engineering
Fracture Mechanics. Published online 2022. doi:10.1016/j.engfracmech.2022.108899
apa: Kullmer, G., Weiß, D., & Schramm, B. (2022). Development of a method for
the separate measurement of the growth of internal crack tips by means of the
potential drop method. Engineering Fracture Mechanics, Article 108899.
https://doi.org/10.1016/j.engfracmech.2022.108899
bibtex: '@article{Kullmer_Weiß_Schramm_2022, title={Development of a method for
the separate measurement of the growth of internal crack tips by means of the
potential drop method}, DOI={10.1016/j.engfracmech.2022.108899},
number={108899}, journal={Engineering Fracture Mechanics}, publisher={Elsevier
BV}, author={Kullmer, Gunter and Weiß, Deborah and Schramm, Britta}, year={2022}
}'
chicago: Kullmer, Gunter, Deborah Weiß, and Britta Schramm. “Development of a Method
for the Separate Measurement of the Growth of Internal Crack Tips by Means of
the Potential Drop Method.” Engineering Fracture Mechanics, 2022. https://doi.org/10.1016/j.engfracmech.2022.108899.
ieee: 'G. Kullmer, D. Weiß, and B. Schramm, “Development of a method for the separate
measurement of the growth of internal crack tips by means of the potential drop
method,” Engineering Fracture Mechanics, Art. no. 108899, 2022, doi: 10.1016/j.engfracmech.2022.108899.'
mla: Kullmer, Gunter, et al. “Development of a Method for the Separate Measurement
of the Growth of Internal Crack Tips by Means of the Potential Drop Method.” Engineering
Fracture Mechanics, 108899, Elsevier BV, 2022, doi:10.1016/j.engfracmech.2022.108899.
short: G. Kullmer, D. Weiß, B. Schramm, Engineering Fracture Mechanics (2022).
date_created: 2022-12-06T14:59:46Z
date_updated: 2023-04-27T10:15:11Z
department:
- _id: '143'
- _id: '630'
doi: 10.1016/j.engfracmech.2022.108899
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
publication: Engineering Fracture Mechanics
publication_identifier:
issn:
- 0013-7944
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Development of a method for the separate measurement of the growth of internal
crack tips by means of the potential drop method
type: journal_article
user_id: '45673'
year: '2022'
...
---
_id: '34074'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Jamil
full_name: Mirzapour, Jamil
last_name: Mirzapour
citation:
ama: Mahnken R, Mirzapour J. A statistically based strain energy function for polymer
chains in rubber elasticity. Archive of Applied Mechanics. 2022;92(11):3295-3323.
doi:10.1007/s00419-022-02237-8
apa: Mahnken, R., & Mirzapour, J. (2022). A statistically based strain energy
function for polymer chains in rubber elasticity. Archive of Applied Mechanics,
92(11), 3295–3323. https://doi.org/10.1007/s00419-022-02237-8
bibtex: '@article{Mahnken_Mirzapour_2022, title={A statistically based strain energy
function for polymer chains in rubber elasticity}, volume={92}, DOI={10.1007/s00419-022-02237-8},
number={11}, journal={Archive of Applied Mechanics}, publisher={Springer Science
and Business Media LLC}, author={Mahnken, Rolf and Mirzapour, Jamil}, year={2022},
pages={3295–3323} }'
chicago: 'Mahnken, Rolf, and Jamil Mirzapour. “A Statistically Based Strain Energy
Function for Polymer Chains in Rubber Elasticity.” Archive of Applied Mechanics
92, no. 11 (2022): 3295–3323. https://doi.org/10.1007/s00419-022-02237-8.'
ieee: 'R. Mahnken and J. Mirzapour, “A statistically based strain energy function
for polymer chains in rubber elasticity,” Archive of Applied Mechanics,
vol. 92, no. 11, pp. 3295–3323, 2022, doi: 10.1007/s00419-022-02237-8.'
mla: Mahnken, Rolf, and Jamil Mirzapour. “A Statistically Based Strain Energy Function
for Polymer Chains in Rubber Elasticity.” Archive of Applied Mechanics,
vol. 92, no. 11, Springer Science and Business Media LLC, 2022, pp. 3295–323,
doi:10.1007/s00419-022-02237-8.
short: R. Mahnken, J. Mirzapour, Archive of Applied Mechanics 92 (2022) 3295–3323.
date_created: 2022-11-14T12:51:05Z
date_updated: 2023-04-27T10:07:20Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1007/s00419-022-02237-8
intvolume: ' 92'
issue: '11'
keyword:
- Mechanical Engineering
language:
- iso: eng
page: 3295-3323
publication: Archive of Applied Mechanics
publication_identifier:
issn:
- 0939-1533
- 1432-0681
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: A statistically based strain energy function for polymer chains in rubber elasticity
type: journal_article
user_id: '335'
volume: 92
year: '2022'
...
---
_id: '41485'
author:
- first_name: Robin
full_name: Clemens, Robin
last_name: Clemens
- first_name: Enrico
full_name: Barth, Enrico
last_name: Barth
- first_name: Eckart
full_name: Uhlmann, Eckart
last_name: Uhlmann
- first_name: Yingjie
full_name: Zhan, Yingjie
last_name: Zhan
- first_name: Ismail
full_name: Caylak, Ismail
id: '75'
last_name: Caylak
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Clemens R, Barth E, Uhlmann E, Zhan Y, Caylak I, Mahnken R. Effects on Process
Forces of Individual Milling Tool Edges Depending on the Cutting Angle and Cutting
Speed When Milling Cfrp. SSRN Electronic Journal. Published online 2022.
doi:10.2139/ssrn.4259246
apa: Clemens, R., Barth, E., Uhlmann, E., Zhan, Y., Caylak, I., & Mahnken, R.
(2022). Effects on Process Forces of Individual Milling Tool Edges Depending on
the Cutting Angle and Cutting Speed When Milling Cfrp. SSRN Electronic Journal.
https://doi.org/10.2139/ssrn.4259246
bibtex: '@article{Clemens_Barth_Uhlmann_Zhan_Caylak_Mahnken_2022, title={Effects
on Process Forces of Individual Milling Tool Edges Depending on the Cutting Angle
and Cutting Speed When Milling Cfrp}, DOI={10.2139/ssrn.4259246},
journal={SSRN Electronic Journal}, publisher={Elsevier BV}, author={Clemens, Robin
and Barth, Enrico and Uhlmann, Eckart and Zhan, Yingjie and Caylak, Ismail and
Mahnken, Rolf}, year={2022} }'
chicago: Clemens, Robin, Enrico Barth, Eckart Uhlmann, Yingjie Zhan, Ismail Caylak,
and Rolf Mahnken. “Effects on Process Forces of Individual Milling Tool Edges
Depending on the Cutting Angle and Cutting Speed When Milling Cfrp.” SSRN Electronic
Journal, 2022. https://doi.org/10.2139/ssrn.4259246.
ieee: 'R. Clemens, E. Barth, E. Uhlmann, Y. Zhan, I. Caylak, and R. Mahnken, “Effects
on Process Forces of Individual Milling Tool Edges Depending on the Cutting Angle
and Cutting Speed When Milling Cfrp,” SSRN Electronic Journal, 2022, doi:
10.2139/ssrn.4259246.'
mla: Clemens, Robin, et al. “Effects on Process Forces of Individual Milling Tool
Edges Depending on the Cutting Angle and Cutting Speed When Milling Cfrp.” SSRN
Electronic Journal, Elsevier BV, 2022, doi:10.2139/ssrn.4259246.
short: R. Clemens, E. Barth, E. Uhlmann, Y. Zhan, I. Caylak, R. Mahnken, SSRN Electronic
Journal (2022).
date_created: 2023-02-02T12:49:43Z
date_updated: 2023-04-27T10:08:09Z
department:
- _id: '9'
- _id: '154'
doi: 10.2139/ssrn.4259246
keyword:
- General Earth and Planetary Sciences
- General Environmental Science
language:
- iso: eng
publication: SSRN Electronic Journal
publication_identifier:
issn:
- 1556-5068
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Effects on Process Forces of Individual Milling Tool Edges Depending on the
Cutting Angle and Cutting Speed When Milling Cfrp
type: journal_article
user_id: '335'
year: '2022'
...
---
_id: '42813'
author:
- first_name: Eugen
full_name: Wiens, Eugen
last_name: Wiens
citation:
ama: Wiens E. Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen
Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen
Eigenschaften.; 2022.
apa: Wiens, E. (2022). Innendrückwalzen – Ein innovatives Umformverfahren zur
inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren
mechanischen Eigenschaften.
bibtex: '@book{Wiens_2022, title={Innendrückwalzen – Ein innovatives Umformverfahren
zur inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren
mechanischen Eigenschaften}, author={Wiens, Eugen}, year={2022} }'
chicago: Wiens, Eugen. Innendrückwalzen – Ein innovatives Umformverfahren zur
inkrementellen Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren
mechanischen Eigenschaften, 2022.
ieee: E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen
Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen
Eigenschaften. 2022.
mla: Wiens, Eugen. Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen
Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen
Eigenschaften. 2022.
short: E. Wiens, Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen
Formgebung von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen
Eigenschaften, 2022.
date_created: 2023-03-07T09:30:56Z
date_updated: 2023-03-07T09:31:06Z
department:
- _id: '156'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-8440-8408-5
status: public
title: Innendrückwalzen – Ein innovatives Umformverfahren zur inkrementellen Formgebung
von wanddickenkonturierten Rohren mit lokal einstellbaren mechanischen Eigenschaften
type: dissertation
user_id: '15324'
year: '2022'
...
---
_id: '42874'
author:
- first_name: Johannes
full_name: Göddecke, Johannes
id: '59070'
last_name: Göddecke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Tim
full_name: Göhrs, Tim
last_name: Göhrs
- first_name: Manfred
full_name: Große Gehling, Manfred
last_name: Große Gehling
citation:
ama: 'Göddecke J, Meschut G, Göhrs T, Große Gehling M. Methodenentwicklung zur Auslegung
geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter
Beanspruchungen im Landmaschinen- und Anlagenbau. In: DECHEMA, Gesellschaft für
Chemische Technik und Biotechnologie e.V., ed. ; 2022.'
apa: Göddecke, J., Meschut, G., Göhrs, T., & Große Gehling, M. (2022). Methodenentwicklung
zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung
betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau (DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.V., Ed.).
bibtex: '@inproceedings{Göddecke_Meschut_Göhrs_Große Gehling_2022, place={Frankfurt},
title={Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem
Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen-
und Anlagenbau}, author={Göddecke, Johannes and Meschut, Gerson and Göhrs, Tim
and Große Gehling, Manfred}, editor={DECHEMA, Gesellschaft für Chemische Technik
und Biotechnologie e.V.}, year={2022} }'
chicago: Göddecke, Johannes, Gerson Meschut, Tim Göhrs, and Manfred Große Gehling.
“Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl
unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und
Anlagenbau.” edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie
e.V. Frankfurt, 2022.
ieee: J. Göddecke, G. Meschut, T. Göhrs, and M. Große Gehling, “Methodenentwicklung
zur Auslegung geklebter Verbindungen aus hochfestem Stahl unter Berücksichtigung
betriebsrelevanter Beanspruchungen im Landmaschinen- und Anlagenbau,” Webkonferenz,
2022.
mla: Göddecke, Johannes, et al. Methodenentwicklung zur Auslegung geklebter Verbindungen
aus hochfestem Stahl unter Berücksichtigung betriebsrelevanter Beanspruchungen
im Landmaschinen- und Anlagenbau. Edited by DECHEMA, Gesellschaft für Chemische
Technik und Biotechnologie e.V., 2022.
short: 'J. Göddecke, G. Meschut, T. Göhrs, M. Große Gehling, in: DECHEMA, Gesellschaft
für Chemische Technik und Biotechnologie e.V. (Ed.), Frankfurt, 2022.'
conference:
end_date: 2022-02-16
location: Webkonferenz
name: 22. Kolloquium gemeinsame Forschung in der Klebtechnik
start_date: 2022-02-15
corporate_editor:
- DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
date_created: 2023-03-08T16:46:33Z
date_updated: 2023-03-08T16:56:52Z
department:
- _id: '157'
language:
- iso: ger
place: Frankfurt
publication_status: published
status: public
title: Methodenentwicklung zur Auslegung geklebter Verbindungen aus hochfestem Stahl
unter Berücksichtigung betriebsrelevanter Beanspruchungen im Landmaschinen- und
Anlagenbau
type: conference
user_id: '59070'
year: '2022'
...
---
_id: '42875'
author:
- first_name: Johannes
full_name: Göddecke, Johannes
id: '59070'
last_name: Göddecke
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
citation:
ama: 'Göddecke J, Meschut G. Dämpfungseigenschaften geklebter Strukturen unter dynamischer
Beanspruchung. In: Deutscher Verband für Schweißen und verwandte Verfahren e.V.
(DVS), ed. ; 2022.'
apa: Göddecke, J., & Meschut, G. (2022). Dämpfungseigenschaften geklebter
Strukturen unter dynamischer Beanspruchung (Deutscher Verband für Schweißen
und verwandte Verfahren e.V. (DVS), Ed.).
bibtex: '@inproceedings{Göddecke_Meschut_2022, title={Dämpfungseigenschaften geklebter
Strukturen unter dynamischer Beanspruchung}, author={Göddecke, Johannes and Meschut,
Gerson}, editor={Deutscher Verband für Schweißen und verwandte Verfahren e.V.
(DVS)}, year={2022} }'
chicago: Göddecke, Johannes, and Gerson Meschut. “Dämpfungseigenschaften geklebter
Strukturen unter dynamischer Beanspruchung.” edited by Deutscher Verband für Schweißen
und verwandte Verfahren e.V. (DVS), 2022.
ieee: J. Göddecke and G. Meschut, “Dämpfungseigenschaften geklebter Strukturen unter
dynamischer Beanspruchung,” Koblenz, 2022.
mla: Göddecke, Johannes, and Gerson Meschut. Dämpfungseigenschaften geklebter
Strukturen unter dynamischer Beanspruchung. Edited by Deutscher Verband für
Schweißen und verwandte Verfahren e.V. (DVS), 2022.
short: 'J. Göddecke, G. Meschut, in: Deutscher Verband für Schweißen und verwandte
Verfahren e.V. (DVS) (Ed.), 2022.'
conference:
end_date: 2022-09-21
location: Koblenz
name: 'DVS CONGRESS 2022 '
start_date: 2022-09-19
corporate_editor:
- Deutscher Verband für Schweißen und verwandte Verfahren e.V. (DVS)
date_created: 2023-03-08T16:50:23Z
date_updated: 2023-03-08T16:56:42Z
department:
- _id: '157'
language:
- iso: ger
publication_status: published
status: public
title: Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung
type: conference
user_id: '59070'
year: '2022'
...
---
_id: '41160'
author:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Neukötter M, Jesinghausen S, Schmid H-J. Triggering instabilities of polymer
solution suspensions under uniaxial extension (Presentation). In: ; 2022.'
apa: Neukötter, M., Jesinghausen, S., & Schmid, H.-J. (2022). Triggering
instabilities of polymer solution suspensions under uniaxial extension (Presentation).
Joint Online Symposium on Rheology, Digital.
bibtex: '@inproceedings{Neukötter_Jesinghausen_Schmid_2022, title={Triggering instabilities
of polymer solution suspensions under uniaxial extension (Presentation)}, author={Neukötter,
Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }'
chicago: Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Triggering
Instabilities of Polymer Solution Suspensions under Uniaxial Extension (Presentation),”
2022.
ieee: M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Triggering instabilities
of polymer solution suspensions under uniaxial extension (Presentation),” presented
at the Joint Online Symposium on Rheology, Digital, 2022.
mla: Neukötter, Moritz, et al. Triggering Instabilities of Polymer Solution Suspensions
under Uniaxial Extension (Presentation). 2022.
short: 'M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.'
conference:
end_date: 2022-05-04
location: Digital
name: Joint Online Symposium on Rheology
start_date: 2022-05-03
date_created: 2023-01-31T11:53:59Z
date_updated: 2023-03-14T08:31:13Z
ddc:
- '660'
department:
- _id: '150'
- _id: '9'
file:
- access_level: closed
content_type: application/pdf
creator: moritzne
date_created: 2023-03-14T08:15:20Z
date_updated: 2023-03-14T08:15:20Z
file_id: '42976'
file_name: Abstract_Neukoetter_DRG_Symposium.pdf
file_size: 111996
relation: main_file
success: 1
file_date_updated: 2023-03-14T08:15:20Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: Triggering instabilities of polymer solution suspensions under uniaxial extension (Presentation)
type: conference_abstract
user_id: '45530'
year: '2022'
...
---
_id: '41158'
author:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Neukötter M, Jesinghausen S, Schmid H-J. Instability analysis of suspensions
with a polymer solution matrix (Presentation). In: ; 2022.'
apa: Neukötter, M., Jesinghausen, S., & Schmid, H.-J. (2022). Instability
analysis of suspensions with a polymer solution matrix (Presentation). Annual
European Rheology Conference, Sevilla.
bibtex: '@inproceedings{Neukötter_Jesinghausen_Schmid_2022, title={Instability analysis
of suspensions with a polymer solution matrix (Presentation)}, author={Neukötter,
Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }'
chicago: Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Instability
Analysis of Suspensions with a Polymer Solution Matrix (Presentation),” 2022.
ieee: M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Instability analysis of
suspensions with a polymer solution matrix (Presentation),” presented at the Annual
European Rheology Conference, Sevilla, 2022.
mla: Neukötter, Moritz, et al. Instability Analysis of Suspensions with a Polymer
Solution Matrix (Presentation). 2022.
short: 'M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2022.'
conference:
end_date: 2022-04-28
location: Sevilla
name: Annual European Rheology Conference
start_date: 2022-04-25
date_created: 2023-01-31T11:51:15Z
date_updated: 2023-03-14T08:30:42Z
ddc:
- '660'
department:
- _id: '150'
- _id: '9'
file:
- access_level: closed
content_type: application/pdf
creator: moritzne
date_created: 2023-03-14T08:17:53Z
date_updated: 2023-03-14T08:17:53Z
file_id: '42977'
file_name: Abstract_AERC_2022.pdf
file_size: 52172
relation: main_file
success: 1
file_date_updated: 2023-03-14T08:17:53Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: Instability analysis of suspensions with a polymer solution matrix (Presentation)
type: conference_abstract
user_id: '45530'
year: '2022'
...
---
_id: '33695'
author:
- first_name: Moritz Johannes
full_name: Rüther, Moritz Johannes
id: '38188'
last_name: Rüther
- first_name: Sven Helge
full_name: Klippstein, Sven Helge
id: '71545'
last_name: Klippstein
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Rüther MJ, Klippstein SH, Schmid H-J. Flowability of polymer powders at elevated
temperatures for additive manufacturing. In: Rüther MJ, Klippstein SH, Schmid
H-J, eds. ; 2022.'
apa: Rüther, M. J., Klippstein, S. H., & Schmid, H.-J. (2022). Flowability
of polymer powders at elevated temperatures for additive manufacturing (M.
J. Rüther, S. H. Klippstein, & H.-J. Schmid, Eds.).
bibtex: '@inproceedings{Rüther_Klippstein_Schmid_2022, title={Flowability of polymer
powders at elevated temperatures for additive manufacturing}, author={Rüther,
Moritz Johannes and Klippstein, Sven Helge and Schmid, Hans-Joachim}, editor={Rüther,
Moritz Johannes and Klippstein, Sven Helge and Schmid, Hans-Joachim}, year={2022}
}'
chicago: Rüther, Moritz Johannes, Sven Helge Klippstein, and Hans-Joachim Schmid.
“Flowability of Polymer Powders at Elevated Temperatures for Additive Manufacturing.”
edited by Moritz Johannes Rüther, Sven Helge Klippstein, and Hans-Joachim Schmid,
2022.
ieee: M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Flowability of polymer
powders at elevated temperatures for additive manufacturing,” Madrid, 2022.
mla: Rüther, Moritz Johannes, et al. Flowability of Polymer Powders at Elevated
Temperatures for Additive Manufacturing. Edited by Moritz Johannes Rüther
et al., 2022.
short: 'M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: M.J. Rüther, S.H. Klippstein,
H.-J. Schmid (Eds.), 2022.'
conference:
end_date: 2022.09.22
location: Madrid
name: 9th Congress on Particle Technology
start_date: 2022.09.18
date_created: 2022-10-11T14:08:25Z
date_updated: 2023-03-27T19:56:10Z
department:
- _id: '150'
editor:
- first_name: Moritz Johannes
full_name: Rüther, Moritz Johannes
last_name: Rüther
- first_name: Sven Helge
full_name: Klippstein, Sven Helge
last_name: Klippstein
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
last_name: Schmid
language:
- iso: eng
status: public
title: Flowability of polymer powders at elevated temperatures for additive manufacturing
type: conference_abstract
user_id: '71545'
year: '2022'
...
---
_id: '43156'
abstract:
- lang: eng
text: The use of mechanical joining technologies offers the possibility of joining
mixed material structures, which are used in particular in lightweight construction.
An integrated securing of the joinability in versatile process chains is currently
hardly possible as the number of combinable tool variants as well as variable
force- and path-based process parameters is infinite. A versatile process chain,
i.e. a sequence of all the processes and process steps required for product manufacturing,
enables targeted changes to the semi-finished product, the joint, the component
or the joining process that exceed the originally planned extend while still ensuring
joinability. In detail, it leads to a unique joint with its own mechanical property
profile, which, against the background of the resulting infinite number of combinations,
makes it impossible to secure the joinability on the conventional experimentally
based approach without extensive safety factors. The Transregional Colaborative
Research Center 285 (TCRC285), which also initiated this special issue, is intended
to enable mechanical joining technology to be versatile in the sense of high application
flexibility. This is to be achieved with a numerical representation of the complete
process chain from the incoming semi finished product via the joining part production
and the joining process to the property profile of the joint in the operating
phase. Thus a predictability of the joinability can be achieved and improvements
in the individual life cycles of a joint can be realized by grasping the cause-and-effect
relationships. On the basis of this knowledge, new possibilities for intervention
in the joining process are to be created for the adaptation of the joining processes.
With the aid of the methods developed for this purpose, tools will later be available
to the end user to substitute the large number of mechanical joining processes
or joining task-specific configurations with a smaller number of adaptable processes.
This expands the flexibility in material choices, enabling challenges in environmental
issues and sustainability to be overcome.
author:
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Mathias
full_name: Bobbert, Mathias
last_name: Bobbert
citation:
ama: Meschut G, Merklein M, Brosius A, Bobbert M. Mechanical joining in versatile
process chains. Production Engineering. 2022;16(2-3):187-191. doi:10.1007/s11740-022-01125-y
apa: Meschut, G., Merklein, M., Brosius, A., & Bobbert, M. (2022). Mechanical
joining in versatile process chains. Production Engineering, 16(2–3),
187–191. https://doi.org/10.1007/s11740-022-01125-y
bibtex: '@article{Meschut_Merklein_Brosius_Bobbert_2022, title={Mechanical joining
in versatile process chains}, volume={16}, DOI={10.1007/s11740-022-01125-y},
number={2–3}, journal={Production Engineering}, publisher={Springer Science and
Business Media LLC}, author={Meschut, Gerson and Merklein, Marion and Brosius,
Alexander and Bobbert, Mathias}, year={2022}, pages={187–191} }'
chicago: 'Meschut, Gerson, Marion Merklein, Alexander Brosius, and Mathias Bobbert.
“Mechanical Joining in Versatile Process Chains.” Production Engineering
16, no. 2–3 (2022): 187–91. https://doi.org/10.1007/s11740-022-01125-y.'
ieee: 'G. Meschut, M. Merklein, A. Brosius, and M. Bobbert, “Mechanical joining
in versatile process chains,” Production Engineering, vol. 16, no. 2–3,
pp. 187–191, 2022, doi: 10.1007/s11740-022-01125-y.'
mla: Meschut, Gerson, et al. “Mechanical Joining in Versatile Process Chains.” Production
Engineering, vol. 16, no. 2–3, Springer Science and Business Media LLC, 2022,
pp. 187–91, doi:10.1007/s11740-022-01125-y.
short: G. Meschut, M. Merklein, A. Brosius, M. Bobbert, Production Engineering 16
(2022) 187–191.
date_created: 2023-03-29T08:31:27Z
date_updated: 2023-03-29T08:32:24Z
department:
- _id: '157'
doi: 10.1007/s11740-022-01125-y
intvolume: ' 16'
issue: 2-3
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
page: 187-191
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Mechanical joining in versatile process chains
type: journal_article
user_id: '53912'
volume: 16
year: '2022'
...
---
_id: '43155'
author:
- first_name: Tobias
full_name: Schmolke, Tobias
last_name: Schmolke
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
- first_name: Dennis
full_name: Meinderink, Dennis
last_name: Meinderink
- first_name: Florian
full_name: Rieker, Florian
last_name: Rieker
- first_name: Guido
full_name: Grundmeier, Guido
last_name: Grundmeier
citation:
ama: Schmolke T, Meschut G, Meinderink D, Rieker F, Grundmeier G. Untersuchung von
Klebverbindungen für Batteriegehäuse. adhäsion KLEBEN & DICHTEN.
2022;66(6):40-43. doi:10.1007/s35145-022-0596-9
apa: Schmolke, T., Meschut, G., Meinderink, D., Rieker, F., & Grundmeier, G.
(2022). Untersuchung von Klebverbindungen für Batteriegehäuse. adhäsion KLEBEN
& DICHTEN, 66(6), 40–43. https://doi.org/10.1007/s35145-022-0596-9
bibtex: '@article{Schmolke_Meschut_Meinderink_Rieker_Grundmeier_2022, title={Untersuchung
von Klebverbindungen für Batteriegehäuse}, volume={66}, DOI={10.1007/s35145-022-0596-9},
number={6}, journal={adhäsion KLEBEN & DICHTEN}, publisher={Springer Science
and Business Media LLC}, author={Schmolke, Tobias and Meschut, Gerson and Meinderink,
Dennis and Rieker, Florian and Grundmeier, Guido}, year={2022}, pages={40–43}
}'
chicago: 'Schmolke, Tobias, Gerson Meschut, Dennis Meinderink, Florian Rieker, and
Guido Grundmeier. “Untersuchung von Klebverbindungen für Batteriegehäuse.” adhäsion
KLEBEN & DICHTEN 66, no. 6 (2022): 40–43. https://doi.org/10.1007/s35145-022-0596-9.'
ieee: 'T. Schmolke, G. Meschut, D. Meinderink, F. Rieker, and G. Grundmeier, “Untersuchung
von Klebverbindungen für Batteriegehäuse,” adhäsion KLEBEN & DICHTEN,
vol. 66, no. 6, pp. 40–43, 2022, doi: 10.1007/s35145-022-0596-9.'
mla: Schmolke, Tobias, et al. “Untersuchung von Klebverbindungen für Batteriegehäuse.”
adhäsion KLEBEN & DICHTEN, vol. 66, no. 6, Springer Science and
Business Media LLC, 2022, pp. 40–43, doi:10.1007/s35145-022-0596-9.
short: T. Schmolke, G. Meschut, D. Meinderink, F. Rieker, G. Grundmeier, adhäsion
KLEBEN & DICHTEN 66 (2022) 40–43.
date_created: 2023-03-29T08:28:13Z
date_updated: 2023-03-29T08:29:21Z
department:
- _id: '157'
doi: 10.1007/s35145-022-0596-9
intvolume: ' 66'
issue: '6'
keyword:
- Polymers and Plastics
- General Chemical Engineering
- General Chemistry
language:
- iso: ger
page: 40-43
publication: adhäsion KLEBEN & DICHTEN
publication_identifier:
issn:
- 1619-1919
- 2192-8681
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Untersuchung von Klebverbindungen für Batteriegehäuse
type: journal_article
user_id: '53912'
volume: 66
year: '2022'
...
---
_id: '43157'
author:
- first_name: Matthias
full_name: Werner, Matthias
last_name: Werner
- first_name: Jonas
full_name: Wagner, Jonas
last_name: Wagner
- first_name: Florian
full_name: Ribbeck, Florian
last_name: Ribbeck
- first_name: Simon
full_name: Hensel, Simon
last_name: Hensel
- first_name: Klaus
full_name: Goth, Klaus
last_name: Goth
- first_name: Thomas
full_name: Graf, Thomas
last_name: Graf
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
citation:
ama: Werner M, Wagner J, Ribbeck F, et al. Influence of the incident angle on the
OCT measurement during remote laser beam welding. Procedia CIRP. 2022;111:513-517.
doi:10.1016/j.procir.2022.08.081
apa: Werner, M., Wagner, J., Ribbeck, F., Hensel, S., Goth, K., Graf, T., &
Meschut, G. (2022). Influence of the incident angle on the OCT measurement during
remote laser beam welding. Procedia CIRP, 111, 513–517. https://doi.org/10.1016/j.procir.2022.08.081
bibtex: '@article{Werner_Wagner_Ribbeck_Hensel_Goth_Graf_Meschut_2022, title={Influence
of the incident angle on the OCT measurement during remote laser beam welding},
volume={111}, DOI={10.1016/j.procir.2022.08.081},
journal={Procedia CIRP}, publisher={Elsevier BV}, author={Werner, Matthias and
Wagner, Jonas and Ribbeck, Florian and Hensel, Simon and Goth, Klaus and Graf,
Thomas and Meschut, Gerson}, year={2022}, pages={513–517} }'
chicago: 'Werner, Matthias, Jonas Wagner, Florian Ribbeck, Simon Hensel, Klaus Goth,
Thomas Graf, and Gerson Meschut. “Influence of the Incident Angle on the OCT Measurement
during Remote Laser Beam Welding.” Procedia CIRP 111 (2022): 513–17. https://doi.org/10.1016/j.procir.2022.08.081.'
ieee: 'M. Werner et al., “Influence of the incident angle on the OCT measurement
during remote laser beam welding,” Procedia CIRP, vol. 111, pp. 513–517,
2022, doi: 10.1016/j.procir.2022.08.081.'
mla: Werner, Matthias, et al. “Influence of the Incident Angle on the OCT Measurement
during Remote Laser Beam Welding.” Procedia CIRP, vol. 111, Elsevier BV,
2022, pp. 513–17, doi:10.1016/j.procir.2022.08.081.
short: M. Werner, J. Wagner, F. Ribbeck, S. Hensel, K. Goth, T. Graf, G. Meschut,
Procedia CIRP 111 (2022) 513–517.
date_created: 2023-03-29T08:33:17Z
date_updated: 2023-03-29T08:34:04Z
department:
- _id: '157'
doi: 10.1016/j.procir.2022.08.081
intvolume: ' 111'
keyword:
- General Medicine
language:
- iso: eng
page: 513-517
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
publisher: Elsevier BV
status: public
title: Influence of the incident angle on the OCT measurement during remote laser
beam welding
type: journal_article
user_id: '53912'
volume: 111
year: '2022'
...
---
_id: '36871'
abstract:
- lang: eng
text: "Additive manufacturing offers the option of converting digital prototypes
into real\r\nstructures as quickly as possible by the special property of tool-free
manufacturing. However, this\r\nprocess can only be used at optimum speed if bottlenecks
can be effectively avoided. One of these\r\nconstraints is the design process.
Although modern CAD systems allow a significant increase in\r\nmany areas, this
always requires a person with specific skills (e.g. engineer). In the field of
AM in\r\nparticular, more and more powerful software solutions have recently been
published which\r\naccelerate the Design for Additive Manufacturing, including
most CAD-tasks. In many areas,\r\ntherefore, attempts are already made to automate
relevant design steps as much as possible, more\r\nand more using neural networks
and artificial intelligence. This paper presents how and why such\r\ntechniques
can be used to generate three-dimensional structures quickly and efficiently in
cases of\r\ndeep generative design tasks."
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Niclas
full_name: Meihöfener, Niclas
last_name: Meihöfener
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
citation:
ama: 'Ott M, Meihöfener N, Koch R. Boosting artificial intelligence in design processes
by the use of additive manufacturing. In: Proceedings of the 33rd Annual International
Solid Freeform Fabrication Symposium 2022. Vol 33. Proceedings of the 33rd
Annual International Solid Freeform Fabrication Symposium 2022. ; 2022:696-705.'
apa: Ott, M., Meihöfener, N., & Koch, R. (2022). Boosting artificial intelligence
in design processes by the use of additive manufacturing. Proceedings of the
33rd Annual International Solid Freeform Fabrication Symposium 2022, 33,
696–705.
bibtex: '@inproceedings{Ott_Meihöfener_Koch_2022, place={Austin, Texas}, series={Proceedings
of the 33rd Annual International Solid Freeform Fabrication Symposium 2022}, title={Boosting
artificial intelligence in design processes by the use of additive manufacturing},
volume={33}, booktitle={Proceedings of the 33rd Annual International Solid Freeform
Fabrication Symposium 2022}, author={Ott, Manuel and Meihöfener, Niclas and Koch,
Rainer}, year={2022}, pages={696–705}, collection={Proceedings of the 33rd Annual
International Solid Freeform Fabrication Symposium 2022} }'
chicago: Ott, Manuel, Niclas Meihöfener, and Rainer Koch. “Boosting Artificial Intelligence
in Design Processes by the Use of Additive Manufacturing.” In Proceedings of
the 33rd Annual International Solid Freeform Fabrication Symposium 2022, 33:696–705.
Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium
2022. Austin, Texas, 2022.
ieee: M. Ott, N. Meihöfener, and R. Koch, “Boosting artificial intelligence in design
processes by the use of additive manufacturing,” in Proceedings of the 33rd
Annual International Solid Freeform Fabrication Symposium 2022, Austin, Texas,
2022, vol. 33, pp. 696–705.
mla: Ott, Manuel, et al. “Boosting Artificial Intelligence in Design Processes by
the Use of Additive Manufacturing.” Proceedings of the 33rd Annual International
Solid Freeform Fabrication Symposium 2022, vol. 33, 2022, pp. 696–705.
short: 'M. Ott, N. Meihöfener, R. Koch, in: Proceedings of the 33rd Annual International
Solid Freeform Fabrication Symposium 2022, Austin, Texas, 2022, pp. 696–705.'
conference:
end_date: 2022-07-27
location: Austin, Texas
name: Solid Freeform Fabrication Symposium 2022
start_date: 2022-07-25
date_created: 2023-01-16T08:59:19Z
date_updated: 2023-03-30T11:42:25Z
ddc:
- '620'
department:
- _id: '741'
- _id: '144'
file:
- access_level: closed
content_type: application/pdf
creator: maot
date_created: 2023-01-16T08:58:25Z
date_updated: 2023-01-16T08:58:25Z
file_id: '36875'
file_name: Boosting Artificial Intelligence in Design Process.pdf
file_size: 1354163
relation: main_file
success: 1
file_date_updated: 2023-01-16T08:58:25Z
has_accepted_license: '1'
intvolume: ' 33'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://utw10945.utweb.utexas.edu/sites/default/files/2022/Boosting%20Artificial%20Intelligence%20in%20Design%20Process.pdf
oa: '1'
page: 696-705
place: Austin, Texas
publication: Proceedings of the 33rd Annual International Solid Freeform Fabrication
Symposium 2022
publication_status: published
related_material:
link:
- relation: confirmation
url: https://utw10945.utweb.utexas.edu/sites/default/files/2022/Boosting%20Artificial%20Intelligence%20in%20Design%20Process.pdf
series_title: Proceedings of the 33rd Annual International Solid Freeform Fabrication
Symposium 2022
status: public
title: Boosting artificial intelligence in design processes by the use of additive
manufacturing
type: conference
user_id: '44204'
volume: 33
year: '2022'
...
---
_id: '43238'
author:
- first_name: Torben
full_name: Rüther, Torben
id: '76950'
last_name: Rüther
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Rüther T, Jesinghausen S, Schmid H-J. A novel correction method for the shear
rate in a couette rheometer (Vortrag). In: ; 2022.'
apa: Rüther, T., Jesinghausen, S., & Schmid, H.-J. (2022). A novel correction
method for the shear rate in a couette rheometer (Vortrag). AERC , Sevilla.
bibtex: '@inproceedings{Rüther_Jesinghausen_Schmid_2022, title={A novel correction
method for the shear rate in a couette rheometer (Vortrag)}, author={Rüther, Torben
and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }'
chicago: Rüther, Torben, Steffen Jesinghausen, and Hans-Joachim Schmid. “A Novel
Correction Method for the Shear Rate in a Couette Rheometer (Vortrag),” 2022.
ieee: T. Rüther, S. Jesinghausen, and H.-J. Schmid, “A novel correction method for
the shear rate in a couette rheometer (Vortrag),” presented at the AERC , Sevilla,
2022.
mla: Rüther, Torben, et al. A Novel Correction Method for the Shear Rate in a
Couette Rheometer (Vortrag). 2022.
short: 'T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.'
conference:
end_date: 2022-04-28
location: Sevilla
name: 'AERC '
start_date: 2022-04-26
date_created: 2023-03-31T08:45:20Z
date_updated: 2023-03-31T08:45:25Z
ddc:
- '660'
department:
- _id: '150'
- _id: '9'
file:
- access_level: closed
content_type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
creator: torue
date_created: 2023-03-31T08:43:57Z
date_updated: 2023-03-31T08:43:57Z
file_id: '43239'
file_name: A_novel_method_for_determining_the_true_shear_rate_in_a_couette_rheometer.docx
file_size: 17099
relation: main_file
success: 1
file_date_updated: 2023-03-31T08:43:57Z
has_accepted_license: '1'
keyword:
- Couette
- Rheology
- Correction
language:
- iso: eng
status: public
title: A novel correction method for the shear rate in a couette rheometer (Vortrag)
type: conference_abstract
user_id: '76950'
year: '2022'
...
---
_id: '43243'
author:
- first_name: Torben
full_name: Rüther, Torben
id: '76950'
last_name: Rüther
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Rüther T, Schmid H-J. Multidimensional particle characterization: Centrifugal
Differential Mobility Analyzer (Poster). In: ; 2022.'
apa: 'Rüther, T., & Schmid, H.-J. (2022). Multidimensional particle characterization:
Centrifugal Differential Mobility Analyzer (Poster). World Congress on Particle
Technology 2022, Madrid.'
bibtex: '@inproceedings{Rüther_Schmid_2022, title={Multidimensional particle characterization:
Centrifugal Differential Mobility Analyzer (Poster)}, author={Rüther, Torben and
Schmid, Hans-Joachim}, year={2022} }'
chicago: 'Rüther, Torben, and Hans-Joachim Schmid. “Multidimensional Particle Characterization:
Centrifugal Differential Mobility Analyzer (Poster),” 2022.'
ieee: 'T. Rüther and H.-J. Schmid, “Multidimensional particle characterization:
Centrifugal Differential Mobility Analyzer (Poster),” presented at the World Congress
on Particle Technology 2022, Madrid, 2022.'
mla: 'Rüther, Torben, and Hans-Joachim Schmid. Multidimensional Particle Characterization:
Centrifugal Differential Mobility Analyzer (Poster). 2022.'
short: 'T. Rüther, H.-J. Schmid, in: 2022.'
conference:
end_date: 2022-09-21
location: Madrid
name: World Congress on Particle Technology 2022
start_date: 2022-09-18
date_created: 2023-03-31T09:12:51Z
date_updated: 2023-03-31T09:12:53Z
ddc:
- '660'
department:
- _id: '150'
- _id: '9'
file:
- access_level: closed
content_type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
creator: torue
date_created: 2023-03-31T09:12:43Z
date_updated: 2023-03-31T09:12:43Z
file_id: '43244'
file_name: A measurement principle for the determination of multidimensional particle
properties using a CDMA.docx
file_size: 283757
relation: main_file
success: 1
file_date_updated: 2023-03-31T09:12:43Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: 'Multidimensional particle characterization: Centrifugal Differential Mobility
Analyzer (Poster)'
type: conference_abstract
user_id: '76950'
year: '2022'
...
---
_id: '43240'
author:
- first_name: Torben
full_name: Rüther, Torben
id: '76950'
last_name: Rüther
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Rüther T, Jesinghausen S, Schmid H-J. NEW CORRECTION APPROACHES FOR DETERMINING
THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag). In: ; 2022.'
apa: Rüther, T., Jesinghausen, S., & Schmid, H.-J. (2022). NEW CORRECTION
APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag).
Joint Online Symposium on Rheology 2022.
bibtex: '@inproceedings{Rüther_Jesinghausen_Schmid_2022, title={NEW CORRECTION APPROACHES
FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag)}, author={Rüther,
Torben and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2022} }'
chicago: Rüther, Torben, Steffen Jesinghausen, and Hans-Joachim Schmid. “NEW CORRECTION
APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag),”
2022.
ieee: T. Rüther, S. Jesinghausen, and H.-J. Schmid, “NEW CORRECTION APPROACHES FOR
DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag),” presented at
the Joint Online Symposium on Rheology 2022, 2022.
mla: Rüther, Torben, et al. NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE
SHEAR RATE IN A COAXIAL-RHEOMETER (Vortrag). 2022.
short: 'T. Rüther, S. Jesinghausen, H.-J. Schmid, in: 2022.'
conference:
name: Joint Online Symposium on Rheology 2022
date_created: 2023-03-31T08:51:33Z
date_updated: 2023-03-31T08:54:36Z
ddc:
- '660'
department:
- _id: '150'
- _id: '9'
file:
- access_level: closed
content_type: application/vnd.openxmlformats-officedocument.wordprocessingml.document
creator: torue
date_created: 2023-03-31T08:53:55Z
date_updated: 2023-03-31T08:53:55Z
file_id: '43242'
file_name: Rheology_Abstract.docx
file_size: 67981
relation: main_file
success: 1
file_date_updated: 2023-03-31T08:53:55Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: NEW CORRECTION APPROACHES FOR DETERMINING THE TRUE SHEAR RATE IN A COAXIAL-RHEOMETER
(Vortrag)
type: conference_abstract
user_id: '76950'
year: '2022'
...