--- _id: '21374' abstract: - lang: eng text: A dark-field scanning transmission ion microscopy detector was designed for the helium ion microscope. The detection principle is based on a secondary electron conversion holder with an exchangeable aperture strip allowing its acceptance angle to be tuned from 3 to 98 mrad. The contrast mechanism and performance were investigated using freestanding nanometer-thin carbon membranes. The results demonstrate that the detector can be optimized either for most efficient signal collection or for maximum image contrast. The designed setup allows for the imaging of thin low-density materials that otherwise provide little signal or contrast and for a clear end-point detection in the fabrication of nanopores. In addition, the detector is able to determine the thickness of membranes with sub-nanometer precision by quantitatively evaluating the image signal and comparing the results with Monte Carlo simulations. The thickness determined by the dark-field transmission detector is compared to X-ray photoelectron spectroscopy and energy-filtered transmission electron microscopy measurements. author: - first_name: Daniel full_name: Emmrich, Daniel last_name: Emmrich - first_name: Annalena full_name: Wolff, Annalena last_name: Wolff - first_name: Nikolaus full_name: Meyerbröker, Nikolaus last_name: Meyerbröker - first_name: Jörg full_name: Lindner, Jörg id: '20797' last_name: Lindner - first_name: André full_name: Beyer, André last_name: Beyer - first_name: Armin full_name: Gölzhäuser, Armin last_name: Gölzhäuser citation: ama: Emmrich D, Wolff A, Meyerbröker N, Lindner J, Beyer A, Gölzhäuser A. Scanning transmission helium ion microscopy on carbon nanomembranes. Beilstein Journal of Nanotechnology. 2021:222-231. doi:10.3762/bjnano.12.18 apa: Emmrich, D., Wolff, A., Meyerbröker, N., Lindner, J., Beyer, A., & Gölzhäuser, A. (2021). Scanning transmission helium ion microscopy on carbon nanomembranes. Beilstein Journal of Nanotechnology, 222–231. https://doi.org/10.3762/bjnano.12.18 bibtex: '@article{Emmrich_Wolff_Meyerbröker_Lindner_Beyer_Gölzhäuser_2021, title={Scanning transmission helium ion microscopy on carbon nanomembranes}, DOI={10.3762/bjnano.12.18}, journal={Beilstein Journal of Nanotechnology}, author={Emmrich, Daniel and Wolff, Annalena and Meyerbröker, Nikolaus and Lindner, Jörg and Beyer, André and Gölzhäuser, Armin}, year={2021}, pages={222–231} }' chicago: Emmrich, Daniel, Annalena Wolff, Nikolaus Meyerbröker, Jörg Lindner, André Beyer, and Armin Gölzhäuser. “Scanning Transmission Helium Ion Microscopy on Carbon Nanomembranes.” Beilstein Journal of Nanotechnology, 2021, 222–31. https://doi.org/10.3762/bjnano.12.18. ieee: D. Emmrich, A. Wolff, N. Meyerbröker, J. Lindner, A. Beyer, and A. Gölzhäuser, “Scanning transmission helium ion microscopy on carbon nanomembranes,” Beilstein Journal of Nanotechnology, pp. 222–231, 2021. mla: Emmrich, Daniel, et al. “Scanning Transmission Helium Ion Microscopy on Carbon Nanomembranes.” Beilstein Journal of Nanotechnology, 2021, pp. 222–31, doi:10.3762/bjnano.12.18. short: D. Emmrich, A. Wolff, N. Meyerbröker, J. Lindner, A. Beyer, A. Gölzhäuser, Beilstein Journal of Nanotechnology (2021) 222–231. date_created: 2021-03-04T10:12:59Z date_updated: 2022-01-06T06:54:57Z department: - _id: '286' - _id: '321' - _id: '15' - _id: '9' doi: 10.3762/bjnano.12.18 language: - iso: eng page: 222-231 publication: Beilstein Journal of Nanotechnology publication_identifier: issn: - 2190-4286 publication_status: published status: public title: Scanning transmission helium ion microscopy on carbon nanomembranes type: journal_article user_id: '77496' year: '2021' ... --- _id: '21376' author: - first_name: Matti full_name: Grabo, Matti id: '66520' last_name: Grabo - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: 'Grabo M, Kenig E. Modellierung eines Latentwärmespeichersystems in Form einer ungeordneten Schüttung makro-verkapselter PCM-Elemente. In: ; 2021.' apa: Grabo, M., & Kenig, E. (2021). Modellierung eines Latentwärmespeichersystems in Form einer ungeordneten Schüttung makro-verkapselter PCM-Elemente. Presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung, Leipzig. bibtex: '@inproceedings{Grabo_Kenig_2021, title={Modellierung eines Latentwärmespeichersystems in Form einer ungeordneten Schüttung makro-verkapselter PCM-Elemente}, author={Grabo, Matti and Kenig, Eugeny}, year={2021} }' chicago: Grabo, Matti, and Eugeny Kenig. “Modellierung Eines Latentwärmespeichersystems in Form Einer Ungeordneten Schüttung Makro-Verkapselter PCM-Elemente,” 2021. ieee: M. Grabo and E. Kenig, “Modellierung eines Latentwärmespeichersystems in Form einer ungeordneten Schüttung makro-verkapselter PCM-Elemente,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung, Leipzig, 2021. mla: Grabo, Matti, and Eugeny Kenig. Modellierung Eines Latentwärmespeichersystems in Form Einer Ungeordneten Schüttung Makro-Verkapselter PCM-Elemente. 2021. short: 'M. Grabo, E. Kenig, in: 2021.' conference: location: Leipzig name: Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung date_created: 2021-03-04T11:05:40Z date_updated: 2022-01-06T06:54:57Z department: - _id: '9' - _id: '145' language: - iso: eng status: public title: Modellierung eines Latentwärmespeichersystems in Form einer ungeordneten Schüttung makro-verkapselter PCM-Elemente type: conference_abstract user_id: '66520' year: '2021' ... --- _id: '21431' author: - first_name: Nick full_name: Chudalla, Nick id: '41235' last_name: Chudalla - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Aurélie full_name: Bartley, Aurélie last_name: Bartley - first_name: Tim Michael full_name: Wibbeke, Tim Michael last_name: Wibbeke citation: ama: 'Chudalla N, Meschut G, Bartley A, Wibbeke TM. Analyse des Versagensverhaltens geklebter Stahl Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung. In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., ed. 21. Kolloquium: Gemeinsame Forschung in Der Klebtechnik. ; 2021.' apa: 'Chudalla, N., Meschut, G., Bartley, A., & Wibbeke, T. M. (2021). Analyse des Versagensverhaltens geklebter Stahl Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung. In DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), 21. Kolloquium: Gemeinsame Forschung in der Klebtechnik.' bibtex: '@inproceedings{Chudalla_Meschut_Bartley_Wibbeke_2021, title={Analyse des Versagensverhaltens geklebter Stahl Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung}, booktitle={21. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Chudalla, Nick and Meschut, Gerson and Bartley, Aurélie and Wibbeke, Tim Michael}, editor={DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.}, year={2021} }' chicago: 'Chudalla, Nick, Gerson Meschut, Aurélie Bartley, and Tim Michael Wibbeke. “Analyse Des Versagensverhaltens Geklebter Stahl Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” In 21. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.' ieee: 'N. Chudalla, G. Meschut, A. Bartley, and T. M. Wibbeke, “Analyse des Versagensverhaltens geklebter Stahl Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung,” in 21. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2021.' mla: 'Chudalla, Nick, et al. “Analyse Des Versagensverhaltens Geklebter Stahl Verbindungen Beim Werkstoffschonenden Entfügen in Der Karosserieinstandsetzung.” 21. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V., 2021.' short: 'N. Chudalla, G. Meschut, A. Bartley, T.M. Wibbeke, in: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. (Ed.), 21. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2021.' conference: end_date: 2021-03-03 name: '21. Kolloquium: Gemeinsame Forschung in der Klebtechnik' start_date: 2021-03-02 corporate_editor: - DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. date_created: 2021-03-09T12:30:43Z date_updated: 2022-01-06T06:54:59Z department: - _id: '157' language: - iso: eng publication: '21. Kolloquium: Gemeinsame Forschung in der Klebtechnik' status: public title: Analyse des Versagensverhaltens geklebter Stahl Verbindungen beim werkstoffschonenden Entfügen in der Karosserieinstandsetzung type: conference_abstract user_id: '41235' year: '2021' ... --- _id: '21442' author: - first_name: Steffen Rainer full_name: Tinkloh, Steffen Rainer id: '72722' last_name: Tinkloh - first_name: Tao full_name: Wu, Tao last_name: Wu - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Thomas full_name: Niendorf, Thomas last_name: Niendorf citation: ama: 'Tinkloh SR, Wu T, Tröster T, Niendorf T. Development of a submodel technique for FFT-based solvers in micromechanical analysis. In: ; 2021.' apa: Tinkloh, S. R., Wu, T., Tröster, T., & Niendorf, T. (2021). Development of a submodel technique for FFT-based solvers in micromechanical analysis. Presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online). bibtex: '@inproceedings{Tinkloh_Wu_Tröster_Niendorf_2021, title={Development of a submodel technique for FFT-based solvers in micromechanical analysis}, author={Tinkloh, Steffen Rainer and Wu, Tao and Tröster, Thomas and Niendorf, Thomas}, year={2021} }' chicago: Tinkloh, Steffen Rainer, Tao Wu, Thomas Tröster, and Thomas Niendorf. “Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis,” 2021. ieee: S. R. Tinkloh, T. Wu, T. Tröster, and T. Niendorf, “Development of a submodel technique for FFT-based solvers in micromechanical analysis,” presented at the 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online), 2021. mla: Tinkloh, Steffen Rainer, et al. Development of a Submodel Technique for FFT-Based Solvers in Micromechanical Analysis. 2021. short: 'S.R. Tinkloh, T. Wu, T. Tröster, T. Niendorf, in: 2021.' conference: end_date: 2021-03-07 name: 2nd International Conference on Theoretical, Analytical and Computational Methods for Composite Materials and Composite Structures (online) start_date: 2021-03-05 date_created: 2021-03-11T09:29:55Z date_updated: 2022-01-06T06:54:59Z ddc: - '620' department: - _id: '9' - _id: '321' - _id: '149' keyword: - Micromechanics - Fast Fourier Transform (FFT) - Reduced Order Modelling - Homogenization language: - iso: eng project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing status: public title: Development of a submodel technique for FFT-based solvers in micromechanical analysis type: conference_abstract user_id: '72722' year: '2021' ... --- _id: '21573' author: - first_name: Jens full_name: Heine, Jens last_name: Heine - first_name: Christian full_name: Wecker, Christian id: '29891' last_name: Wecker - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig - first_name: Hans-Jörg full_name: Bart, Hans-Jörg last_name: Bart citation: ama: 'Heine J, Wecker C, Kenig E, Bart H-J. Stofftransportmessung und -visualisierung am ruhenden und bewegten Einzeltropfen. In: Online: Jahrestreffen der ProcessNet-Fachgruppe Extraktion; 2021.' apa: 'Heine, J., Wecker, C., Kenig, E., & Bart, H.-J. (2021). Stofftransportmessung und -visualisierung am ruhenden und bewegten Einzeltropfen. Online: Jahrestreffen der ProcessNet-Fachgruppe Extraktion.' bibtex: '@inproceedings{Heine_Wecker_Kenig_Bart_2021, place={Online}, title={Stofftransportmessung und -visualisierung am ruhenden und bewegten Einzeltropfen}, publisher={Jahrestreffen der ProcessNet-Fachgruppe Extraktion}, author={Heine, Jens and Wecker, Christian and Kenig, Eugeny and Bart, Hans-Jörg}, year={2021} }' chicago: 'Heine, Jens, Christian Wecker, Eugeny Kenig, and Hans-Jörg Bart. “Stofftransportmessung Und -Visualisierung Am Ruhenden Und Bewegten Einzeltropfen.” Online: Jahrestreffen der ProcessNet-Fachgruppe Extraktion, 2021.' ieee: J. Heine, C. Wecker, E. Kenig, and H.-J. Bart, “Stofftransportmessung und -visualisierung am ruhenden und bewegten Einzeltropfen,” 2021. mla: Heine, Jens, et al. Stofftransportmessung Und -Visualisierung Am Ruhenden Und Bewegten Einzeltropfen. Jahrestreffen der ProcessNet-Fachgruppe Extraktion, 2021. short: 'J. Heine, C. Wecker, E. Kenig, H.-J. Bart, in: Jahrestreffen der ProcessNet-Fachgruppe Extraktion, Online, 2021.' date_created: 2021-03-30T11:33:21Z date_updated: 2022-01-06T06:55:06Z department: - _id: '9' - _id: '145' language: - iso: eng place: Online project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publisher: Jahrestreffen der ProcessNet-Fachgruppe Extraktion status: public title: Stofftransportmessung und -visualisierung am ruhenden und bewegten Einzeltropfen type: conference_abstract user_id: '29891' year: '2021' ... --- _id: '21574' author: - first_name: Christian full_name: Wecker, Christian id: '29891' last_name: Wecker - first_name: Andreas full_name: Schulz, Andreas id: '63109' last_name: Schulz - first_name: Jens full_name: Heine, Jens last_name: Heine - first_name: Hans-Jörg full_name: Bart, Hans-Jörg last_name: Bart - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: 'Wecker C, Schulz A, Heine J, Bart H-J, Kenig E. Numerische Untersuchung der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von der Tropfenbildung bis zur Tropfeninteraktion. In: Online: Jahrestreffen der ProcessNet-Fachgruppe Extraktion; 2021.' apa: 'Wecker, C., Schulz, A., Heine, J., Bart, H.-J., & Kenig, E. (2021). Numerische Untersuchung der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von der Tropfenbildung bis zur Tropfeninteraktion. Online: Jahrestreffen der ProcessNet-Fachgruppe Extraktion.' bibtex: '@inproceedings{Wecker_Schulz_Heine_Bart_Kenig_2021, place={Online}, title={Numerische Untersuchung der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von der Tropfenbildung bis zur Tropfeninteraktion}, publisher={Jahrestreffen der ProcessNet-Fachgruppe Extraktion}, author={Wecker, Christian and Schulz, Andreas and Heine, Jens and Bart, Hans-Jörg and Kenig, Eugeny}, year={2021} }' chicago: 'Wecker, Christian, Andreas Schulz, Jens Heine, Hans-Jörg Bart, and Eugeny Kenig. “Numerische Untersuchung Der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von Der Tropfenbildung Bis Zur Tropfeninteraktion.” Online: Jahrestreffen der ProcessNet-Fachgruppe Extraktion, 2021.' ieee: 'C. Wecker, A. Schulz, J. Heine, H.-J. Bart, and E. Kenig, “Numerische Untersuchung der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von der Tropfenbildung bis zur Tropfeninteraktion,” 2021.' mla: 'Wecker, Christian, et al. Numerische Untersuchung Der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von Der Tropfenbildung Bis Zur Tropfeninteraktion. Jahrestreffen der ProcessNet-Fachgruppe Extraktion, 2021.' short: 'C. Wecker, A. Schulz, J. Heine, H.-J. Bart, E. Kenig, in: Jahrestreffen der ProcessNet-Fachgruppe Extraktion, Online, 2021.' date_created: 2021-03-30T11:35:22Z date_updated: 2022-01-06T06:55:06Z department: - _id: '9' - _id: '145' language: - iso: eng place: Online project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publisher: Jahrestreffen der ProcessNet-Fachgruppe Extraktion status: public title: 'Numerische Untersuchung der Marangonikonvektion in Flüssig-Flüssig-Systemen: Von der Tropfenbildung bis zur Tropfeninteraktion' type: conference_abstract user_id: '29891' year: '2021' ... --- _id: '21575' author: - first_name: Christian full_name: Wecker, Christian id: '29891' last_name: Wecker - first_name: Anna full_name: Hoppe, Anna last_name: Hoppe - first_name: Andreas full_name: Schulz, Andreas id: '63109' last_name: Schulz - first_name: Jens full_name: Heine, Jens last_name: Heine - first_name: Hans-Jörg full_name: Bart, Hans-Jörg last_name: Bart - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: 'Wecker C, Hoppe A, Schulz A, Heine J, Bart H-J, Kenig E. Numerische Untersuchungen zu Fluiddynamik und Stofftransport binärer Tropfeninteraktion unter Berücksichtigung von Marangonikonvektion. In: Online: Jahrestreffen der ProcessNet-Fachgruppe Wärme- und Stofftransport; 2021.' apa: 'Wecker, C., Hoppe, A., Schulz, A., Heine, J., Bart, H.-J., & Kenig, E. (2021). Numerische Untersuchungen zu Fluiddynamik und Stofftransport binärer Tropfeninteraktion unter Berücksichtigung von Marangonikonvektion. Online: Jahrestreffen der ProcessNet-Fachgruppe Wärme- und Stofftransport.' bibtex: '@inproceedings{Wecker_Hoppe_Schulz_Heine_Bart_Kenig_2021, place={Online}, title={Numerische Untersuchungen zu Fluiddynamik und Stofftransport binärer Tropfeninteraktion unter Berücksichtigung von Marangonikonvektion}, publisher={Jahrestreffen der ProcessNet-Fachgruppe Wärme- und Stofftransport}, author={Wecker, Christian and Hoppe, Anna and Schulz, Andreas and Heine, Jens and Bart, Hans-Jörg and Kenig, Eugeny}, year={2021} }' chicago: 'Wecker, Christian, Anna Hoppe, Andreas Schulz, Jens Heine, Hans-Jörg Bart, and Eugeny Kenig. “Numerische Untersuchungen Zu Fluiddynamik Und Stofftransport Binärer Tropfeninteraktion Unter Berücksichtigung von Marangonikonvektion.” Online: Jahrestreffen der ProcessNet-Fachgruppe Wärme- und Stofftransport, 2021.' ieee: C. Wecker, A. Hoppe, A. Schulz, J. Heine, H.-J. Bart, and E. Kenig, “Numerische Untersuchungen zu Fluiddynamik und Stofftransport binärer Tropfeninteraktion unter Berücksichtigung von Marangonikonvektion,” 2021. mla: Wecker, Christian, et al. Numerische Untersuchungen Zu Fluiddynamik Und Stofftransport Binärer Tropfeninteraktion Unter Berücksichtigung von Marangonikonvektion. Jahrestreffen der ProcessNet-Fachgruppe Wärme- und Stofftransport, 2021. short: 'C. Wecker, A. Hoppe, A. Schulz, J. Heine, H.-J. Bart, E. Kenig, in: Jahrestreffen der ProcessNet-Fachgruppe Wärme- und Stofftransport, Online, 2021.' date_created: 2021-03-30T11:37:18Z date_updated: 2022-01-06T06:55:06Z department: - _id: '9' - _id: '145' language: - iso: eng place: Online project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publisher: Jahrestreffen der ProcessNet-Fachgruppe Wärme- und Stofftransport status: public title: Numerische Untersuchungen zu Fluiddynamik und Stofftransport binärer Tropfeninteraktion unter Berücksichtigung von Marangonikonvektion type: conference_abstract user_id: '29891' year: '2021' ... --- _id: '21576' author: - first_name: Andreas full_name: Schulz, Andreas id: '63109' last_name: Schulz - first_name: Christian full_name: Wecker, Christian id: '29891' last_name: Wecker - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: 'Schulz A, Wecker C, Kenig E. Mehrkomponenten-Stofftransport an bewegten Phasengrenzflächen unter Berücksichtigung von Diffusionskreuzeffekten. In: Online: Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmung; 2021.' apa: 'Schulz, A., Wecker, C., & Kenig, E. (2021). Mehrkomponenten-Stofftransport an bewegten Phasengrenzflächen unter Berücksichtigung von Diffusionskreuzeffekten. Online: Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmung.' bibtex: '@inproceedings{Schulz_Wecker_Kenig_2021, place={Online}, title={Mehrkomponenten-Stofftransport an bewegten Phasengrenzflächen unter Berücksichtigung von Diffusionskreuzeffekten}, publisher={Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmung}, author={Schulz, Andreas and Wecker, Christian and Kenig, Eugeny}, year={2021} }' chicago: 'Schulz, Andreas, Christian Wecker, and Eugeny Kenig. “Mehrkomponenten-Stofftransport an Bewegten Phasengrenzflächen Unter Berücksichtigung von Diffusionskreuzeffekten.” Online: Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmung, 2021.' ieee: A. Schulz, C. Wecker, and E. Kenig, “Mehrkomponenten-Stofftransport an bewegten Phasengrenzflächen unter Berücksichtigung von Diffusionskreuzeffekten,” 2021. mla: Schulz, Andreas, et al. Mehrkomponenten-Stofftransport an Bewegten Phasengrenzflächen Unter Berücksichtigung von Diffusionskreuzeffekten. Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmung, 2021. short: 'A. Schulz, C. Wecker, E. Kenig, in: Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmung, Online, 2021.' date_created: 2021-03-30T11:43:09Z date_updated: 2022-01-06T06:55:06Z department: - _id: '9' - _id: '145' language: - iso: eng place: Online project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publisher: Jahrestreffen der ProcessNet-Fachgruppe Mehrphasenströmung status: public title: Mehrkomponenten-Stofftransport an bewegten Phasengrenzflächen unter Berücksichtigung von Diffusionskreuzeffekten type: conference_abstract user_id: '29891' year: '2021' ... --- _id: '17744' article_number: '115997' author: - first_name: Lukas full_name: Bolenz, Lukas id: '65478' last_name: Bolenz - first_name: Florian full_name: Fischer, Florian last_name: Fischer - first_name: Dominique full_name: Toye, Dominique last_name: Toye - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: 'Bolenz L, Fischer F, Toye D, Kenig E. Determination of local fluid dynamic parameters in structured packings through X-ray tomography: overcoming image resolution restrictions. Chemical Engineering Science. 2021;229.' apa: 'Bolenz, L., Fischer, F., Toye, D., & Kenig, E. (2021). Determination of local fluid dynamic parameters in structured packings through X-ray tomography: overcoming image resolution restrictions. Chemical Engineering Science, 229.' bibtex: '@article{Bolenz_Fischer_Toye_Kenig_2021, title={Determination of local fluid dynamic parameters in structured packings through X-ray tomography: overcoming image resolution restrictions}, volume={229}, number={115997}, journal={Chemical Engineering Science}, author={Bolenz, Lukas and Fischer, Florian and Toye, Dominique and Kenig, Eugeny}, year={2021} }' chicago: 'Bolenz, Lukas, Florian Fischer, Dominique Toye, and Eugeny Kenig. “Determination of Local Fluid Dynamic Parameters in Structured Packings through X-Ray Tomography: Overcoming Image Resolution Restrictions.” Chemical Engineering Science 229 (2021).' ieee: 'L. Bolenz, F. Fischer, D. Toye, and E. Kenig, “Determination of local fluid dynamic parameters in structured packings through X-ray tomography: overcoming image resolution restrictions,” Chemical Engineering Science, vol. 229, 2021.' mla: 'Bolenz, Lukas, et al. “Determination of Local Fluid Dynamic Parameters in Structured Packings through X-Ray Tomography: Overcoming Image Resolution Restrictions.” Chemical Engineering Science, vol. 229, 115997, 2021.' short: L. Bolenz, F. Fischer, D. Toye, E. Kenig, Chemical Engineering Science 229 (2021). date_created: 2020-08-10T06:31:45Z date_updated: 2022-01-06T06:53:19Z department: - _id: '9' - _id: '145' intvolume: ' 229' language: - iso: eng publication: Chemical Engineering Science status: public title: 'Determination of local fluid dynamic parameters in structured packings through X-ray tomography: overcoming image resolution restrictions' type: journal_article user_id: '65478' volume: 229 year: '2021' ... --- _id: '23402' author: - first_name: René full_name: Bertling, René id: '30050' last_name: Bertling - first_name: Mathias full_name: Hack, Mathias last_name: Hack - first_name: Ilja full_name: Ausner, Ilja last_name: Ausner - first_name: Bernhardt full_name: Horschitz, Bernhardt last_name: Horschitz - first_name: Eugeny full_name: Kenig, Eugeny id: '665' last_name: Kenig citation: ama: 'Bertling R, Hack M, Ausner I, Horschitz B, Kenig E. CFD-basierte Untersuchung von Zweiphasenströmungen in strukturierten Packungen. In: ; 2021.' apa: Bertling, R., Hack, M., Ausner, I., Horschitz, B., & Kenig, E. (2021). CFD-basierte Untersuchung von Zweiphasenströmungen in strukturierten Packungen. Presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung. bibtex: '@inproceedings{Bertling_Hack_Ausner_Horschitz_Kenig_2021, title={CFD-basierte Untersuchung von Zweiphasenströmungen in strukturierten Packungen}, author={Bertling, René and Hack, Mathias and Ausner, Ilja and Horschitz, Bernhardt and Kenig, Eugeny}, year={2021} }' chicago: Bertling, René, Mathias Hack, Ilja Ausner, Bernhardt Horschitz, and Eugeny Kenig. “CFD-Basierte Untersuchung von Zweiphasenströmungen in Strukturierten Packungen,” 2021. ieee: R. Bertling, M. Hack, I. Ausner, B. Horschitz, and E. Kenig, “CFD-basierte Untersuchung von Zweiphasenströmungen in strukturierten Packungen,” presented at the Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung, 2021. mla: Bertling, René, et al. CFD-Basierte Untersuchung von Zweiphasenströmungen in Strukturierten Packungen. 2021. short: 'R. Bertling, M. Hack, I. Ausner, B. Horschitz, E. Kenig, in: 2021.' conference: name: Jahrestreffen der ProcessNet-Fachgruppen Fluidverfahrenstechnik und Wärme- und Stoffübertragung date_created: 2021-08-16T07:02:42Z date_updated: 2022-01-06T06:55:52Z department: - _id: '145' - _id: '9' language: - iso: eng project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing status: public title: CFD-basierte Untersuchung von Zweiphasenströmungen in strukturierten Packungen type: conference_abstract user_id: '30050' year: '2021' ... --- _id: '23576' author: - first_name: Patrick full_name: Biemelt, Patrick id: '24876' last_name: Biemelt - first_name: Sabrina full_name: Böhm, Sabrina last_name: Böhm - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Biemelt P, Böhm S, Gausemeier S, Trächtler A. Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator. In: Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC). ; 2021:1619-1626.' apa: Biemelt, P., Böhm, S., Gausemeier, S., & Trächtler, A. (2021). Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator. Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC), 1619–1626. bibtex: '@inproceedings{Biemelt_Böhm_Gausemeier_Trächtler_2021, title={Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator}, booktitle={Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC)}, author={Biemelt, Patrick and Böhm, Sabrina and Gausemeier, Sandra and Trächtler, Ansgar}, year={2021}, pages={1619–1626} }' chicago: Biemelt, Patrick, Sabrina Böhm, Sandra Gausemeier, and Ansgar Trächtler. “Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator.” In Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC), 1619–26, 2021. ieee: P. Biemelt, S. Böhm, S. Gausemeier, and A. Trächtler, “Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator,” in Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC), Melbourne, Australia, 2021, pp. 1619–1626. mla: Biemelt, Patrick, et al. “Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator.” Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2021, pp. 1619–26. short: 'P. Biemelt, S. Böhm, S. Gausemeier, A. Trächtler, in: Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC), 2021, pp. 1619–1626.' conference: end_date: 2021-10-20 location: Melbourne, Australia name: IEEE International Conference on Systems, Man, and Cybernetics (SMC) start_date: 2021-10-17 date_created: 2021-08-30T12:58:00Z date_updated: 2022-01-06T06:55:57Z department: - _id: '153' language: - iso: eng page: 1619 - 1626 publication: Proceedings of the IEEE International Conference on Systems, Man, and Cybernetics (SMC) status: public title: Subjective Evaluation of Filter- and Optimization-Based Motion Cueing Algorithms for a Hybrid Kinematics Driving Simulator type: conference user_id: '24876' year: '2021' ... --- _id: '23734' author: - first_name: Stefan full_name: Lammers, Stefan id: '13835' last_name: Lammers - first_name: Anne full_name: Kruse, Anne id: '55833' last_name: Kruse - first_name: Jan full_name: Gierse, Jan last_name: Gierse - first_name: Johannes full_name: Tominski, Johannes last_name: Tominski - first_name: Christian-Friedrich full_name: Lindemann, Christian-Friedrich id: '2930' last_name: Lindemann citation: ama: 'Lammers S, Kruse A, Gierse J, Tominski J, Lindemann C-F. Konstruktionsrichtlinien in der Produktentwicklung. In: Koch R, Zimmer D, Tröster T, Gräßler I, eds. Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess. ; 2021.' apa: Lammers, S., Kruse, A., Gierse, J., Tominski, J., & Lindemann, C.-F. (2021). Konstruktionsrichtlinien in der Produktentwicklung. In R. Koch, D. Zimmer, T. Tröster, & I. Gräßler (Eds.), Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess. bibtex: '@inbook{Lammers_Kruse_Gierse_Tominski_Lindemann_2021, title={Konstruktionsrichtlinien in der Produktentwicklung}, booktitle={Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess}, author={Lammers, Stefan and Kruse, Anne and Gierse, Jan and Tominski, Johannes and Lindemann, Christian-Friedrich}, editor={Koch, Rainer and Zimmer, Detmar and Tröster, Thomas and Gräßler, IrisEditors}, year={2021} }' chicago: Lammers, Stefan, Anne Kruse, Jan Gierse, Johannes Tominski, and Christian-Friedrich Lindemann. “Konstruktionsrichtlinien in der Produktentwicklung.” In Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, edited by Rainer Koch, Detmar Zimmer, Thomas Tröster, and Iris Gräßler, 2021. ieee: S. Lammers, A. Kruse, J. Gierse, J. Tominski, and C.-F. Lindemann, “Konstruktionsrichtlinien in der Produktentwicklung,” in Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, R. Koch, D. Zimmer, T. Tröster, and I. Gräßler, Eds. 2021. mla: Lammers, Stefan, et al. “Konstruktionsrichtlinien in der Produktentwicklung.” Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, edited by Rainer Koch et al., 2021. short: 'S. Lammers, A. Kruse, J. Gierse, J. Tominski, C.-F. Lindemann, in: R. Koch, D. Zimmer, T. Tröster, I. Gräßler (Eds.), Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess, 2021.' date_created: 2021-09-03T10:08:27Z date_updated: 2022-01-06T06:55:59Z department: - _id: '9' - _id: '146' - _id: '219' editor: - first_name: Rainer full_name: Koch, Rainer last_name: Koch - first_name: Detmar full_name: Zimmer, Detmar last_name: Zimmer - first_name: Thomas full_name: Tröster, Thomas last_name: Tröster - first_name: Iris full_name: Gräßler, Iris last_name: Gräßler language: - iso: ger publication: Mehrzieloptimierte und durchgängig automatisierte Bauteilentwicklung für Additive Fertigungsverfahren im Produktentstehungsprozess publication_identifier: isbn: - 978-3-8440-7932-6 publication_status: published status: public title: Konstruktionsrichtlinien in der Produktentwicklung type: book_chapter user_id: '13835' year: '2021' ... --- _id: '23760' abstract: - lang: eng text: "The laser sintering process has been a well-established AM process for many years.\r\nDisadvantages of LS are the low material variety and the thermal damage of the unprocessed\r\nmaterial. The low temperature laser sintering attacks at this point and processes powder material at\r\na build chamber temperature lower than the recrystallization temperature. This drastic reduction in\r\ntemperature results in significantly less thermal damage to the material. This work deals with the\r\nlow temperature laser sintering of Polyamide 12 (PA12) on a commercial, unmodified laser\r\nsintering system to compare it to standard laser sintered PA12 and to create the basis for low\r\ntemperature laser sintering of high temperature materials on such a system. First results by\r\nchanging the exposure parameters and by fixing parts on a building platform show a processing of\r\nPA12 on an EOS P396 at a build chamber temperature less than 100 °C instead of standard approx.\r\n175 °C." author: - first_name: Dennis full_name: Menge, Dennis id: '29240' last_name: Menge - first_name: Hans-Joachim full_name: Schmid, Hans-Joachim id: '464' last_name: Schmid citation: ama: 'Menge D, Schmid H-J. Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12. In: ; 2021.' apa: 'Menge, D., & Schmid, H.-J. (2021). Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12. Solid Freeform Fabrication Symposium, Austin, TX.' bibtex: '@inproceedings{Menge_Schmid_2021, title={Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12}, author={Menge, Dennis and Schmid, Hans-Joachim}, year={2021} }' chicago: 'Menge, Dennis, and Hans-Joachim Schmid. “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” 2021.' ieee: 'D. Menge and H.-J. Schmid, “Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12,” presented at the Solid Freeform Fabrication Symposium, Austin, TX, 2021.' mla: 'Menge, Dennis, and Hans-Joachim Schmid. Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12. 2021.' short: 'D. Menge, H.-J. Schmid, in: 2021.' conference: end_date: 2021-08-04 location: Austin, TX name: Solid Freeform Fabrication Symposium start_date: 2021-08-02 date_created: 2021-09-03T13:19:26Z date_updated: 2022-01-06T06:55:59Z department: - _id: '150' - _id: '219' - _id: '624' keyword: - Low Temp LS - Low Temperature Laser Sintering - Polyamid 12 language: - iso: eng main_file_link: - open_access: '1' url: http://utw10945.utweb.utexas.edu/sites/default/files/2021/052%20Low%20Temperature%20Laser%20Sintering%20on%20a%20Standard%20Syst.pdf oa: '1' status: public title: 'Low Temperature Laser Sintering on a Standard System: First Attempts and Results with PA12' type: conference user_id: '29240' year: '2021' ... --- _id: '23839' author: - first_name: Christian full_name: Marschik, Christian last_name: Marschik - first_name: Wolfgang full_name: Roland, Wolfgang last_name: Roland - first_name: Marius full_name: Döner, Marius last_name: Döner - first_name: Georg full_name: Steinbichler, Georg last_name: Steinbichler - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: Marschik C, Roland W, Döner M, Steinbichler G, Schöppner V. A New Approach to Modeling Leakage Flow in 2  Single-Screw Extrusion. Polymers. 2021. apa: Marschik, C., Roland, W., Döner, M., Steinbichler, G., & Schöppner, V. (2021). A New Approach to Modeling Leakage Flow in 2  Single-Screw Extrusion. Polymers. bibtex: '@article{Marschik_Roland_Döner_Steinbichler_Schöppner_2021, title={A New Approach to Modeling Leakage Flow in 2  Single-Screw Extrusion}, journal={Polymers}, publisher={MDPI AG }, author={Marschik, Christian and Roland, Wolfgang and Döner, Marius and Steinbichler, Georg and Schöppner, Volker}, year={2021} }' chicago: Marschik, Christian, Wolfgang Roland, Marius Döner, Georg Steinbichler, and Volker Schöppner. “A New Approach to Modeling Leakage Flow in 2  Single-Screw Extrusion.” Polymers, 2021. ieee: C. Marschik, W. Roland, M. Döner, G. Steinbichler, and V. Schöppner, “A New Approach to Modeling Leakage Flow in 2  Single-Screw Extrusion,” Polymers, 2021. mla: Marschik, Christian, et al. “A New Approach to Modeling Leakage Flow in 2  Single-Screw Extrusion.” Polymers, MDPI AG , 2021. short: C. Marschik, W. Roland, M. Döner, G. Steinbichler, V. Schöppner, Polymers (2021). date_created: 2021-09-07T09:22:06Z date_updated: 2022-01-06T06:56:01Z department: - _id: '9' - _id: '367' language: - iso: eng publication: Polymers publisher: 'MDPI AG ' status: public title: A New Approach to Modeling Leakage Flow in 2 Single-Screw Extrusion type: journal_article user_id: '44116' year: '2021' ... --- _id: '23851' author: - first_name: Elmar full_name: Moritzer, Elmar id: '20531' last_name: Moritzer - first_name: Franziska Isabelle full_name: Bürenhaus, Franziska Isabelle id: '41055' last_name: Bürenhaus citation: ama: 'Moritzer E, Bürenhaus FI. Influence of Processing Parameters on Fiber Length Degradation during Injection Molding. In: SPE ANTEC 2021 Proceedings. ; 2021.' apa: Moritzer, E., & Bürenhaus, F. I. (2021). Influence of Processing Parameters on Fiber Length Degradation during Injection Molding. In SPE ANTEC 2021 Proceedings. bibtex: '@inproceedings{Moritzer_Bürenhaus_2021, title={Influence of Processing Parameters on Fiber Length Degradation during Injection Molding}, booktitle={SPE ANTEC 2021 Proceedings}, author={Moritzer, Elmar and Bürenhaus, Franziska Isabelle}, year={2021} }' chicago: Moritzer, Elmar, and Franziska Isabelle Bürenhaus. “Influence of Processing Parameters on Fiber Length Degradation during Injection Molding.” In SPE ANTEC 2021 Proceedings, 2021. ieee: E. Moritzer and F. I. Bürenhaus, “Influence of Processing Parameters on Fiber Length Degradation during Injection Molding,” in SPE ANTEC 2021 Proceedings, 2021. mla: Moritzer, Elmar, and Franziska Isabelle Bürenhaus. “Influence of Processing Parameters on Fiber Length Degradation during Injection Molding.” SPE ANTEC 2021 Proceedings, 2021. short: 'E. Moritzer, F.I. Bürenhaus, in: SPE ANTEC 2021 Proceedings, 2021.' date_created: 2021-09-07T10:20:57Z date_updated: 2022-01-06T06:56:02Z department: - _id: '9' - _id: '367' language: - iso: eng publication: SPE ANTEC 2021 Proceedings status: public title: Influence of Processing Parameters on Fiber Length Degradation during Injection Molding type: conference user_id: '41055' year: '2021' ... --- _id: '23977' author: - first_name: Lisa full_name: Tölle, Lisa id: '82465' last_name: Tölle - first_name: Matthias full_name: Hopp , Matthias last_name: 'Hopp ' citation: ama: Tölle L, Hopp M. Recycling faserverstärkter Kunststoffe zu Ende gedacht… . Kunststoffland NRW Report . 2021. apa: Tölle, L., & Hopp , M. (2021). Recycling faserverstärkter Kunststoffe zu Ende gedacht… . Kunststoffland NRW Report . bibtex: '@article{Tölle_Hopp _2021, title={Recycling faserverstärkter Kunststoffe zu Ende gedacht… }, journal={Kunststoffland NRW Report }, author={Tölle, Lisa and Hopp , Matthias}, year={2021} }' chicago: Tölle, Lisa, and Matthias Hopp . “Recycling Faserverstärkter Kunststoffe Zu Ende Gedacht… .” Kunststoffland NRW Report , 2021. ieee: L. Tölle and M. Hopp , “Recycling faserverstärkter Kunststoffe zu Ende gedacht… ,” Kunststoffland NRW Report , 2021. mla: Tölle, Lisa, and Matthias Hopp . “Recycling Faserverstärkter Kunststoffe Zu Ende Gedacht… .” Kunststoffland NRW Report , 2021. short: L. Tölle, M. Hopp , Kunststoffland NRW Report (2021). date_created: 2021-09-08T13:44:53Z date_updated: 2022-01-06T06:56:04Z department: - _id: '9' - _id: '367' - _id: '321' language: - iso: eng publication: 'Kunststoffland NRW Report ' status: public title: 'Recycling faserverstärkter Kunststoffe zu Ende gedacht… ' type: journal_article user_id: '82465' year: '2021' ... --- _id: '20302' author: - first_name: Heinrich full_name: Günter, Heinrich id: '66472' last_name: Günter - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: Günter H, Meschut G. Joining of ultra-high-strength steels using resistance element welding on conventional resistance spot welding guns. Welding in the World. 2021. doi:https://doi.org/10.1007/s40194-021-01122-2 apa: Günter, H., & Meschut, G. (2021). Joining of ultra-high-strength steels using resistance element welding on conventional resistance spot welding guns. Welding in the World. https://doi.org/10.1007/s40194-021-01122-2 bibtex: '@article{Günter_Meschut_2021, title={Joining of ultra-high-strength steels using resistance element welding on conventional resistance spot welding guns}, DOI={https://doi.org/10.1007/s40194-021-01122-2}, journal={Welding in the World}, author={Günter, Heinrich and Meschut, Gerson}, year={2021} }' chicago: Günter, Heinrich, and Gerson Meschut. “Joining of Ultra-High-Strength Steels Using Resistance Element Welding on Conventional Resistance Spot Welding Guns.” Welding in the World, 2021. https://doi.org/10.1007/s40194-021-01122-2. ieee: H. Günter and G. Meschut, “Joining of ultra-high-strength steels using resistance element welding on conventional resistance spot welding guns,” Welding in the World, 2021. mla: Günter, Heinrich, and Gerson Meschut. “Joining of Ultra-High-Strength Steels Using Resistance Element Welding on Conventional Resistance Spot Welding Guns.” Welding in the World, 2021, doi:https://doi.org/10.1007/s40194-021-01122-2. short: H. Günter, G. Meschut, Welding in the World (2021). date_created: 2020-11-05T11:59:18Z date_updated: 2022-01-06T06:54:25Z department: - _id: '157' doi: https://doi.org/10.1007/s40194-021-01122-2 language: - iso: eng publication: Welding in the World publication_status: published status: public title: Joining of ultra-high-strength steels using resistance element welding on conventional resistance spot welding guns type: journal_article user_id: '66472' year: '2021' ... --- _id: '20303' author: - first_name: Heinrich full_name: Günter, Heinrich id: '66472' last_name: Günter - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 - first_name: Dennis full_name: Fuss, Dennis last_name: Fuss - first_name: Kai full_name: Werner, Kai last_name: Werner - first_name: Martin full_name: Bangel, Martin last_name: Bangel - first_name: Dirk full_name: Rotzsche, Dirk last_name: Rotzsche - first_name: Marcel full_name: Uffelmann, Marcel last_name: Uffelmann - first_name: Nils full_name: Oleff, Nils last_name: Oleff citation: ama: 'Günter H, Meschut G, Fuss D, et al. Joining of press-hardened profiles for the mixed-intensive lightweight structural design in electric vehicles. In: Joining in Car Body Engineering 2021. ; 2021.' apa: Günter, H., Meschut, G., Fuss, D., Werner, K., Bangel, M., Rotzsche, D., … Oleff, N. (2021). Joining of press-hardened profiles for the mixed-intensive lightweight structural design in electric vehicles. In Joining in Car Body Engineering 2021. Online. bibtex: '@inproceedings{Günter_Meschut_Fuss_Werner_Bangel_Rotzsche_Uffelmann_Oleff_2021, title={Joining of press-hardened profiles for the mixed-intensive lightweight structural design in electric vehicles}, booktitle={Joining in Car Body Engineering 2021}, author={Günter, Heinrich and Meschut, Gerson and Fuss, Dennis and Werner, Kai and Bangel, Martin and Rotzsche, Dirk and Uffelmann, Marcel and Oleff, Nils}, year={2021} }' chicago: Günter, Heinrich, Gerson Meschut, Dennis Fuss, Kai Werner, Martin Bangel, Dirk Rotzsche, Marcel Uffelmann, and Nils Oleff. “Joining of Press-Hardened Profiles for the Mixed-Intensive Lightweight Structural Design in Electric Vehicles.” In Joining in Car Body Engineering 2021, 2021. ieee: H. Günter et al., “Joining of press-hardened profiles for the mixed-intensive lightweight structural design in electric vehicles,” in Joining in Car Body Engineering 2021, Online, 2021. mla: Günter, Heinrich, et al. “Joining of Press-Hardened Profiles for the Mixed-Intensive Lightweight Structural Design in Electric Vehicles.” Joining in Car Body Engineering 2021, 2021. short: 'H. Günter, G. Meschut, D. Fuss, K. Werner, M. Bangel, D. Rotzsche, M. Uffelmann, N. Oleff, in: Joining in Car Body Engineering 2021, 2021.' conference: end_date: 2021-04-22 location: Online name: Joining in Car Body Engineering 2021 start_date: 2021-04-19 date_created: 2020-11-05T12:05:45Z date_updated: 2022-01-06T06:54:25Z department: - _id: '157' language: - iso: eng publication: Joining in Car Body Engineering 2021 publication_status: published status: public title: Joining of press-hardened profiles for the mixed-intensive lightweight structural design in electric vehicles type: conference user_id: '66472' year: '2021' ... --- _id: '20641' author: - first_name: Verena full_name: Aßmuth, Verena id: '53299' last_name: Aßmuth - first_name: Dominik full_name: Teutenberg, Dominik id: '537' last_name: Teutenberg - first_name: Gerson full_name: Meschut, Gerson id: '32056' last_name: Meschut orcid: 0000-0002-2763-1246 citation: ama: 'Aßmuth V, Teutenberg D, Meschut G. Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile. In: 10. Doktorandenseminar Klebtechnik. Vol 369. DVS Berichte. Düsseldorf: DVS Media GmbH.' apa: 'Aßmuth, V., Teutenberg, D., & Meschut, G. (n.d.). Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile. In 10. Doktorandenseminar Klebtechnik (Vol. 369). Düsseldorf: DVS Media GmbH.' bibtex: '@inproceedings{Aßmuth_Teutenberg_Meschut, place={Düsseldorf}, series={DVS Berichte}, title={Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile}, volume={369}, booktitle={10. Doktorandenseminar Klebtechnik}, publisher={DVS Media GmbH}, author={Aßmuth, Verena and Teutenberg, Dominik and Meschut, Gerson}, collection={DVS Berichte} }' chicago: 'Aßmuth, Verena, Dominik Teutenberg, and Gerson Meschut. “Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile.” In 10. Doktorandenseminar Klebtechnik, Vol. 369. DVS Berichte. Düsseldorf: DVS Media GmbH, n.d.' ieee: V. Aßmuth, D. Teutenberg, and G. Meschut, “Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile,” in 10. Doktorandenseminar Klebtechnik, Kassel, vol. 369. mla: Aßmuth, Verena, et al. “Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile.” 10. Doktorandenseminar Klebtechnik, vol. 369, DVS Media GmbH. short: 'V. Aßmuth, D. Teutenberg, G. Meschut, in: 10. Doktorandenseminar Klebtechnik, DVS Media GmbH, Düsseldorf, n.d.' conference: end_date: 2019-09-25 location: Kassel name: 10. Doktorandenseminar Klebtechnik start_date: 2019-09-24 date_created: 2020-12-02T13:05:37Z date_updated: 2022-01-06T06:54:31Z department: - _id: '157' intvolume: ' 369' language: - iso: ger place: Düsseldorf publication: 10. Doktorandenseminar Klebtechnik publication_identifier: isbn: - 978-3-96144-139-6 publication_status: inpress publisher: DVS Media GmbH series_title: DVS Berichte status: public title: Analyse rezepturabhängiger und alterungsbedingter Enthaftungserscheinungen geklebter SMC-Bauteile type: conference user_id: '53299' volume: 369 year: '2021' ... --- _id: '20857' author: - first_name: Alan Adam full_name: Camberg, Alan Adam id: '60544' last_name: Camberg - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Clemens full_name: Latuske, Clemens last_name: Latuske citation: ama: 'Camberg AA, Tröster T, Latuske C. Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing. In: Springer; 2021. doi:https://doi.org/10.1007/978-3-662-62924-6_28' apa: 'Camberg, A. A., Tröster, T., & Latuske, C. (2021). Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing. Presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg: Springer. https://doi.org/10.1007/978-3-662-62924-6_28' bibtex: '@inproceedings{Camberg_Tröster_Latuske_2021, title={Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing}, DOI={https://doi.org/10.1007/978-3-662-62924-6_28}, publisher={Springer}, author={Camberg, Alan Adam and Tröster, Thomas and Latuske, Clemens}, year={2021} }' chicago: 'Camberg, Alan Adam, Thomas Tröster, and Clemens Latuske. “Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing.” Springer, 2021. https://doi.org/10.1007/978-3-662-62924-6_28.' ieee: 'A. A. Camberg, T. Tröster, and C. Latuske, “Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing,” presented at the Conference on Future Production of Hybrid Structures (FPHS 2020), Wolfsburg, 2021.' mla: 'Camberg, Alan Adam, et al. Development of a Hybrid Crash-Relevant Car Body Component with Load-Adapted Thickness Properties: Design, Manufacturing and Testing. Springer, 2021, doi:https://doi.org/10.1007/978-3-662-62924-6_28.' short: 'A.A. Camberg, T. Tröster, C. Latuske, in: Springer, 2021.' conference: end_date: 2020-09-23 location: Wolfsburg name: Conference on Future Production of Hybrid Structures (FPHS 2020) start_date: 2020-09-23 date_created: 2021-01-04T15:23:26Z date_updated: 2022-01-06T06:54:40Z department: - _id: '9' - _id: '321' - _id: '149' doi: https://doi.org/10.1007/978-3-662-62924-6_28 language: - iso: eng project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing publisher: Springer status: public title: 'Development of a hybrid crash-relevant car body component with load-adapted thickness properties: Design, manufacturing and testing' type: conference user_id: '60544' year: '2021' ...