---
_id: '64787'
abstract:
- lang: eng
text: This study proposes a fault diagnostics methodology that addresses the challenges
posed by highly imbalanced datasets typical of railway applications, where faulty
conditions constitute the minority class. Fault diagnostics is performed from
the component level upward, considering each sensor’s proximity to its respective
critical component. Advanced signal analysis, feature engineering, and automated
data-driven model generation techniques were explored to achieve comprehensive
diagnostics, such that the model development process accounts for variations in
the operating conditions and differing levels of information availability. The
proposed methodology is evaluated on datasets from the MONOCAB, for scenarios
with limited faulty instances and on the Beijing 2024 IEEE PHM Conference data
challenge, which focused on fault diagnostics of railway systems under various
fault modes and operating conditions.
article_number: '1'
author:
- first_name: Osarenren Kennedy
full_name: Aimiyekagbon, Osarenren Kennedy
id: '9557'
last_name: Aimiyekagbon
- first_name: Alexander
full_name: Löwen, Alexander
id: '47233'
last_name: Löwen
- first_name: Raphael
full_name: Hanselle, Raphael
last_name: Hanselle
- first_name: Thomas
full_name: Rief, Thomas
last_name: Rief
- first_name: Maximilian
full_name: Beck, Maximilian
last_name: Beck
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Aimiyekagbon OK, Löwen A, Hanselle R, Rief T, Beck M, Sextro W. Multilevel
fault diagnostics for railway applications using limited historical data. In:
PHM Society Asia-Pacific Conference. Vol 5. ; 2025. doi:10.36001/phmap.2025.v5i1.4449'
apa: Aimiyekagbon, O. K., Löwen, A., Hanselle, R., Rief, T., Beck, M., & Sextro,
W. (2025). Multilevel fault diagnostics for railway applications using limited
historical data. PHM Society Asia-Pacific Conference, 5, Article
1. https://doi.org/10.36001/phmap.2025.v5i1.4449
bibtex: '@inproceedings{Aimiyekagbon_Löwen_Hanselle_Rief_Beck_Sextro_2025, title={Multilevel
fault diagnostics for railway applications using limited historical data}, volume={5},
DOI={10.36001/phmap.2025.v5i1.4449},
number={1}, booktitle={PHM Society Asia-Pacific Conference}, author={Aimiyekagbon,
Osarenren Kennedy and Löwen, Alexander and Hanselle, Raphael and Rief, Thomas
and Beck, Maximilian and Sextro, Walter}, year={2025} }'
chicago: Aimiyekagbon, Osarenren Kennedy, Alexander Löwen, Raphael Hanselle, Thomas
Rief, Maximilian Beck, and Walter Sextro. “Multilevel Fault Diagnostics for Railway
Applications Using Limited Historical Data.” In PHM Society Asia-Pacific Conference,
Vol. 5, 2025. https://doi.org/10.36001/phmap.2025.v5i1.4449.
ieee: 'O. K. Aimiyekagbon, A. Löwen, R. Hanselle, T. Rief, M. Beck, and W. Sextro,
“Multilevel fault diagnostics for railway applications using limited historical
data,” in PHM Society Asia-Pacific Conference, 2025, vol. 5, doi: 10.36001/phmap.2025.v5i1.4449.'
mla: Aimiyekagbon, Osarenren Kennedy, et al. “Multilevel Fault Diagnostics for Railway
Applications Using Limited Historical Data.” PHM Society Asia-Pacific Conference,
vol. 5, 1, 2025, doi:10.36001/phmap.2025.v5i1.4449.
short: 'O.K. Aimiyekagbon, A. Löwen, R. Hanselle, T. Rief, M. Beck, W. Sextro, in:
PHM Society Asia-Pacific Conference, 2025.'
date_created: 2026-02-27T20:41:54Z
date_updated: 2026-02-27T20:46:44Z
department:
- _id: '151'
doi: 10.36001/phmap.2025.v5i1.4449
intvolume: ' 5'
keyword:
- MONOCAB
- Beijing Data Challenge
- Diagnostics of railway systems
language:
- iso: eng
project:
- _id: '1355'
name: enableATO – Automatisierter Bahnverkehr als Backbone für eine nachhaltige,
vernetzte Mobilität im ländlichen Raum
publication: PHM Society Asia-Pacific Conference
publication_status: published
quality_controlled: '1'
status: public
title: Multilevel fault diagnostics for railway applications using limited historical
data
type: conference
user_id: '9557'
volume: 5
year: '2025'
...
---
_id: '64798'
abstract:
- lang: eng
text: "Lead-containing piezoelectric ceramics are still the base for today’s ultrasonic
transducers used in broad applications. This is partly due to missing powerful
lead-free piezoelectric ceramic parts in the commercial market. There has been
much research on lead-free materials but developing them into marketable parts
seems to be an ongoing process. The actual exemption of ROHS has expired, but
as the new exemption has already been requested, ceramic suppliers keep on selling
lead containing products. Nevertheless, these should be replaced by lead-free
alternatives for environmental and health issues. \r\nThis contribution focuses
on exploring the technological readiness level of lead-free hard piezoceramics
for prestressed ultrasonic transducers. A small series of bolted Langevin transducers
was set up with standard PZT material and three commercial lead-free variants.
Results of the building process from individual ring ceramic characteristics to
transducer load tests are presented. The main finding of this study is that the
lead-free materials technically can compete with the standard PZT for medium-power
applications. Some adaptations in the ultrasonic system must be done: the geometry
must be altered to fit resonance frequency, and higher voltages or thinner ceramics
are needed to achieve the same vibration level at low load. For reaching same
power, the volume of lead-free ceramics must be 1.5 to 3 times larger. As already
promoted in literature, mechanical losses at high vibration levels are smaller
for the lead-free materials. This might help to argument lead-free piezoelectric
materials in some applications.\r\n\r\nReferences\r\n1.\tDirective 2011/65/EU
of the European Parliament and of the Council of 8 June 2011 on the Restriction
of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment.
EUR-Lex Document 02011L0065-20240801. Available online: http://data.europa.eu/eli/dir/2011/65/2024-08-01
(accessed on 24 January 2025).\r\n2.\tLangevin, P. (1918) Method and Apparatus
for Transmitting and Receiving Submarine Elastic Waves Using the Piezoelectric
Properties of Quartz. French Patent Office; Patent No. FR505703.\r\n3.\tHemsel,
T.; Twiefel, J. (2023) Piezoelectric Ultrasonic Power Transducers. In Encyclopedia
of Materials: Electronics; Academic Press: Oxford, UK; pp. 276–285. https://doi.org/10.1016/b978-0-12-819728-8.00047-4.\r\n4.\tATHENA
Technologie Beratung GmbH (2025) Description of Ultrasound Generator. Available
online: http://shop.myathena.de/epages/12074748.sf/de_DE/?ObjectPath=/Shops/12074748/Products/AM200
(accessed on 13 January 2025).\r\n5.\tLittmann, W.; Hemsel, T.; Kauczor, C.; Wallaschek,
J.; Sinha, W. (2003) Load-adaptive phase-controller for resonant driven piezoelectric
devices. Proc. World Congr. Ultrason. 2003, 48, 547–550.\r\n6.\tScheidemann, C.,
Bornmann, P., Littmann, W., & Hemsel, T. (2025). Lead-Free Ceramics in Prestressed
Ultrasonic Transducers. Actuators, 14(2), 55. https://doi.org/10.3390/act14020055\r\n"
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Scheidemann C, Bornmann P, Littmann W, Hemsel T. Bolted Langevin transducers
with leadfree piezoelectric ceramics. In: ; 2025.'
apa: Scheidemann, C., Bornmann, P., Littmann, W., & Hemsel, T. (2025). Bolted
Langevin transducers with leadfree piezoelectric ceramics. International Workshop
on Piezoelectric Materials and Applications in Actuators (IWPMA), Vilnius, Lithuania.
bibtex: '@inproceedings{Scheidemann_Bornmann_Littmann_Hemsel_2025, title={Bolted
Langevin transducers with leadfree piezoelectric ceramics}, author={Scheidemann,
Claus and Bornmann, Peter and Littmann, Walter and Hemsel, Tobias}, year={2025}
}'
chicago: Scheidemann, Claus, Peter Bornmann, Walter Littmann, and Tobias Hemsel.
“Bolted Langevin Transducers with Leadfree Piezoelectric Ceramics,” 2025.
ieee: C. Scheidemann, P. Bornmann, W. Littmann, and T. Hemsel, “Bolted Langevin
transducers with leadfree piezoelectric ceramics,” presented at the International
Workshop on Piezoelectric Materials and Applications in Actuators (IWPMA), Vilnius,
Lithuania, 2025.
mla: Scheidemann, Claus, et al. Bolted Langevin Transducers with Leadfree Piezoelectric
Ceramics. 2025.
short: 'C. Scheidemann, P. Bornmann, W. Littmann, T. Hemsel, in: 2025.'
conference:
end_date: 2025-07-03
location: Vilnius, Lithuania
name: International Workshop on Piezoelectric Materials and Applications in Actuators
(IWPMA)
start_date: 2025-07-01
date_created: 2026-03-02T10:39:40Z
date_updated: 2026-03-02T11:04:56Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-03-02T10:37:46Z
date_updated: 2026-03-02T11:00:37Z
file_id: '64799'
file_name: IWPMA_2025_Hemsel.pdf
file_size: 1812289
relation: main_file
file_date_updated: 2026-03-02T11:00:37Z
has_accepted_license: '1'
keyword:
- lead free piezoelectric ceramics
- bolted Langevin transducer
- medium power ultrasound.
language:
- iso: eng
oa: '1'
status: public
title: Bolted Langevin transducers with leadfree piezoelectric ceramics
type: conference
user_id: '210'
year: '2025'
...
---
_id: '64800'
abstract:
- lang: eng
text: "Intensive ultrasonic cleaning of surfaces by means of a lead-free ultrasonic
transducer with focusing sonotrode\r\nUltrasonic cleaning baths are probably a
coincidental development: After underwater sonars had already been successfully
used to detect submarines before 1920, it was probably observed in this environment
that the ultrasonic oscillators not only showed a self-cleaning effect but also
cavitation damage. At the beginning of the 1950s, the first ultrasonic cleaning
devices finally came onto the market. Today, the range of applications ranges
from household appliances for jewellery and eyewear cleaning to classic cleaning
baths for metal parts and systems for cleaning highly sensitive electronic components.
There is a certain gap in handheld, mobile cleaning equipment. Although devices
for spot cleaning of textiles are known, the cleaning effect is usually low. \r\nDue
to the directive 2011/65/EU on the restriction of the use of hazardous substances
in electrical and electronic equipment (RoHS) [1] lead should no longer be used
in technical devices. As today’s standard ceramics for medium and high-power ultrasonic
transducers typically contain lead, there is a need to explore the use of lead-free
ceramics in this field. Honda [2] already offers a cleaning transducer based on
lead-free piezoelectric ceramics, but it is designed to be used in cleaning baths.\r\nThis
article presents the model-based development of a highly innovative ultrasonic
cleaner. On the one hand, lead-free piezoelectric ceramics are used, and on the
other hand, a special sonotrode has been developed that concentrates the sound
in such a way that a strong cavitation and thus cleaning effect is achieved with
comparatively low power in a short time. Coupled field finite element method was
used to find an appropriate geometry for the focussing sonotrode. The comparison
of simulation and measurement results shows that the lead-free piezoceramics used
do their job well and can keep up with standard ceramics, but more ceramic volume
is needed to achieve same power. An advanced control concept was elaborated to
ensure continuous hard cavitation at varying distances between the sonotrode and
the part to be cleaned. Cleaning results for different surfaces and contaminations
are presented. The concept of the focusing sonotrode shows that a convincing cleaning
result can be achieved even with low power and in short time, provided that the
oscillation system and control electronics are suitably coordinated.\r\n\r\nReferences\r\n[1]
http://data.europa.eu/eli/dir/2011/65/2024-08-01 \r\n[2] https://en.honda-el.co.jp/product/ceramics/lineup/lead_off/lead-off
\r\n"
author:
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Hemsel T, Scheidemann C, Bornmann P, Littmann W, Sextro W. Intensive ultrasonic
cleaning of surfaces by means of lead-free ultrasonic transducer with focussing
sonotrode. In: ; 2025.'
apa: Hemsel, T., Scheidemann, C., Bornmann, P., Littmann, W., & Sextro, W. (2025).
Intensive ultrasonic cleaning of surfaces by means of lead-free ultrasonic
transducer with focussing sonotrode. International Congress on Ultrasonics
(ICU), Paderborn, Germany.
bibtex: '@inproceedings{Hemsel_Scheidemann_Bornmann_Littmann_Sextro_2025, title={Intensive
ultrasonic cleaning of surfaces by means of lead-free ultrasonic transducer with
focussing sonotrode}, author={Hemsel, Tobias and Scheidemann, Claus and Bornmann,
Peter and Littmann, Walter and Sextro, Walter}, year={2025} }'
chicago: Hemsel, Tobias, Claus Scheidemann, Peter Bornmann, Walter Littmann, and
Walter Sextro. “Intensive Ultrasonic Cleaning of Surfaces by Means of Lead-Free
Ultrasonic Transducer with Focussing Sonotrode,” 2025.
ieee: T. Hemsel, C. Scheidemann, P. Bornmann, W. Littmann, and W. Sextro, “Intensive
ultrasonic cleaning of surfaces by means of lead-free ultrasonic transducer with
focussing sonotrode,” presented at the International Congress on Ultrasonics (ICU),
Paderborn, Germany, 2025.
mla: Hemsel, Tobias, et al. Intensive Ultrasonic Cleaning of Surfaces by Means
of Lead-Free Ultrasonic Transducer with Focussing Sonotrode. 2025.
short: 'T. Hemsel, C. Scheidemann, P. Bornmann, W. Littmann, W. Sextro, in: 2025.'
conference:
end_date: 2025-09-25
location: Paderborn, Germany
name: International Congress on Ultrasonics (ICU)
start_date: 2025-09-21
date_created: 2026-03-02T10:47:48Z
date_updated: 2026-03-02T10:58:37Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-03-02T10:46:43Z
date_updated: 2026-03-02T10:58:37Z
file_id: '64801'
file_name: ICU_2025_Hemsel.pdf
file_size: 1946202
relation: main_file
file_date_updated: 2026-03-02T10:58:37Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
status: public
title: Intensive ultrasonic cleaning of surfaces by means of lead-free ultrasonic
transducer with focussing sonotrode
type: conference
user_id: '210'
year: '2025'
...
---
_id: '61755'
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Scheidemann C, Hemsel T, Sextro W. Time dependent material characteristics
of prestressed piezoelectric ceramics in langevin transducers. In: ; 2025.'
apa: Scheidemann, C., Hemsel, T., & Sextro, W. (2025). Time dependent material
characteristics of prestressed piezoelectric ceramics in langevin transducers.
22nd International Workshop on Piezoelectric Materials and Applications in Actuators
(IWPMA), Vilnius, Lithuania.
bibtex: '@inproceedings{Scheidemann_Hemsel_Sextro_2025, title={Time dependent material
characteristics of prestressed piezoelectric ceramics in langevin transducers},
author={Scheidemann, Claus and Hemsel, Tobias and Sextro, Walter}, year={2025}
}'
chicago: Scheidemann, Claus, Tobias Hemsel, and Walter Sextro. “Time Dependent Material
Characteristics of Prestressed Piezoelectric Ceramics in Langevin Transducers,”
2025.
ieee: C. Scheidemann, T. Hemsel, and W. Sextro, “Time dependent material characteristics
of prestressed piezoelectric ceramics in langevin transducers,” presented at the
22nd International Workshop on Piezoelectric Materials and Applications in Actuators
(IWPMA), Vilnius, Lithuania, 2025.
mla: Scheidemann, Claus, et al. Time Dependent Material Characteristics of Prestressed
Piezoelectric Ceramics in Langevin Transducers. 2025.
short: 'C. Scheidemann, T. Hemsel, W. Sextro, in: 2025.'
conference:
end_date: 2025-07-3
location: Vilnius, Lithuania
name: 22nd International Workshop on Piezoelectric Materials and Applications in
Actuators (IWPMA)
start_date: 2025-07-1
date_created: 2025-10-08T14:22:32Z
date_updated: 2026-03-02T10:59:53Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-01-30T11:07:48Z
date_updated: 2026-03-02T10:59:53Z
file_id: '63817'
file_name: SHS25_IWPMA_2025.pdf
file_size: 644147
relation: main_file
file_date_updated: 2026-03-02T10:59:53Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '245'
name: 'FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken
für Leistungsschallanwendungen (NEPTUN)'
status: public
title: Time dependent material characteristics of prestressed piezoelectric ceramics
in langevin transducers
type: conference
user_id: '210'
year: '2025'
...
---
_id: '61757'
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Julius
full_name: Porzenheim, Julius
last_name: Porzenheim
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Scheidemann C, Porzenheim J, Hemsel T, Sextro W. Investigation of the Setting
Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers. In: ; 2025.'
apa: Scheidemann, C., Porzenheim, J., Hemsel, T., & Sextro, W. (2025). Investigation
of the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers.
2025 International Congress on Ultrasonics (ICU), Paderborn, Germany.
bibtex: '@inproceedings{Scheidemann_Porzenheim_Hemsel_Sextro_2025, title={Investigation
of the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers},
author={Scheidemann, Claus and Porzenheim, Julius and Hemsel, Tobias and Sextro,
Walter}, year={2025} }'
chicago: Scheidemann, Claus, Julius Porzenheim, Tobias Hemsel, and Walter Sextro.
“Investigation of the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic
Transducers,” 2025.
ieee: C. Scheidemann, J. Porzenheim, T. Hemsel, and W. Sextro, “Investigation of
the Setting Behaviour of Mechanically Biased Piezoelectric Ultrasonic Transducers,”
presented at the 2025 International Congress on Ultrasonics (ICU), Paderborn,
Germany, 2025.
mla: Scheidemann, Claus, et al. Investigation of the Setting Behaviour of Mechanically
Biased Piezoelectric Ultrasonic Transducers. 2025.
short: 'C. Scheidemann, J. Porzenheim, T. Hemsel, W. Sextro, in: 2025.'
conference:
end_date: 2025-09-25
location: Paderborn, Germany
name: 2025 International Congress on Ultrasonics (ICU)
start_date: 2025-09-21
date_created: 2025-10-08T14:33:44Z
date_updated: 2026-03-02T10:59:36Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-01-30T07:30:44Z
date_updated: 2026-03-02T10:59:36Z
file_id: '63816'
file_name: Sch25_ICU_2025.pdf
file_size: 783790
relation: main_file
file_date_updated: 2026-03-02T10:59:36Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '245'
name: 'FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken
für Leistungsschallanwendungen (NEPTUN)'
status: public
title: Investigation of the Setting Behaviour of Mechanically Biased Piezoelectric
Ultrasonic Transducers
type: conference
user_id: '210'
year: '2025'
...
---
_id: '62988'
author:
- first_name: Augustina C.
full_name: Amakor, Augustina C.
last_name: Amakor
- first_name: Manuel B.
full_name: Berkemeier, Manuel B.
last_name: Berkemeier
- first_name: Meike Claudia
full_name: Wohlleben, Meike Claudia
id: '43991'
last_name: Wohlleben
orcid: 0009-0009-9767-7168
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Sebastian
full_name: Peitz, Sebastian
last_name: Peitz
citation:
ama: 'Amakor AC, Berkemeier MB, Wohlleben MC, Sextro W, Peitz S. Surrogate-Assisted
Multi-objective Design of Complex Multibody Systems. In: Lecture Notes in Computer
Science. Springer Nature Switzerland; 2025. doi:10.1007/978-3-032-04555-3_21'
apa: Amakor, A. C., Berkemeier, M. B., Wohlleben, M. C., Sextro, W., & Peitz,
S. (2025). Surrogate-Assisted Multi-objective Design of Complex Multibody Systems.
In Lecture Notes in Computer Science. Springer Nature Switzerland. https://doi.org/10.1007/978-3-032-04555-3_21
bibtex: '@inbook{Amakor_Berkemeier_Wohlleben_Sextro_Peitz_2025, place={Cham}, title={Surrogate-Assisted
Multi-objective Design of Complex Multibody Systems}, DOI={10.1007/978-3-032-04555-3_21},
booktitle={Lecture Notes in Computer Science}, publisher={Springer Nature Switzerland},
author={Amakor, Augustina C. and Berkemeier, Manuel B. and Wohlleben, Meike Claudia
and Sextro, Walter and Peitz, Sebastian}, year={2025} }'
chicago: 'Amakor, Augustina C., Manuel B. Berkemeier, Meike Claudia Wohlleben, Walter
Sextro, and Sebastian Peitz. “Surrogate-Assisted Multi-Objective Design of Complex
Multibody Systems.” In Lecture Notes in Computer Science. Cham: Springer
Nature Switzerland, 2025. https://doi.org/10.1007/978-3-032-04555-3_21.'
ieee: 'A. C. Amakor, M. B. Berkemeier, M. C. Wohlleben, W. Sextro, and S. Peitz,
“Surrogate-Assisted Multi-objective Design of Complex Multibody Systems,” in Lecture
Notes in Computer Science, Cham: Springer Nature Switzerland, 2025.'
mla: Amakor, Augustina C., et al. “Surrogate-Assisted Multi-Objective Design of Complex
Multibody Systems.” Lecture Notes in Computer Science, Springer Nature
Switzerland, 2025, doi:10.1007/978-3-032-04555-3_21.
short: 'A.C. Amakor, M.B. Berkemeier, M.C. Wohlleben, W. Sextro, S. Peitz, in: Lecture
Notes in Computer Science, Springer Nature Switzerland, Cham, 2025.'
date_created: 2025-12-09T12:46:17Z
date_updated: 2026-03-03T06:32:10Z
department:
- _id: '151'
doi: 10.1007/978-3-032-04555-3_21
language:
- iso: eng
place: Cham
publication: Lecture Notes in Computer Science
publication_identifier:
isbn:
- '9783032045546'
- '9783032045553'
issn:
- 0302-9743
- 1611-3349
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Surrogate-Assisted Multi-objective Design of Complex Multibody Systems
type: book_chapter
user_id: '43991'
year: '2025'
...
---
_id: '64812'
author:
- first_name: Julia
full_name: Hofmann, Julia
id: '104312'
last_name: Hofmann
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Hofmann J, Teutenberg D, Meschut G. Methodenentwicklung zur numerischen Auslegung
von Klebverbindungen mit lackierten Fügeteilen. In: DECHEMA, ed. 25. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik. ; 2025.'
apa: 'Hofmann, J., Teutenberg, D., & Meschut, G. (2025). Methodenentwicklung
zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen. In DECHEMA
(Ed.), 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Hofmann_Teutenberg_Meschut_2025, title={Methodenentwicklung
zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen}, booktitle={25.
Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hofmann, Julia and
Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2025} }'
chicago: 'Hofmann, Julia, Dominik Teutenberg, and Gerson Meschut. “Methodenentwicklung
Zur Numerischen Auslegung von Klebverbindungen Mit Lackierten Fügeteilen.” In
25. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
2025.'
ieee: 'J. Hofmann, D. Teutenberg, and G. Meschut, “Methodenentwicklung zur numerischen
Auslegung von Klebverbindungen mit lackierten Fügeteilen,” in 25. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, Köln, 2025.'
mla: 'Hofmann, Julia, et al. “Methodenentwicklung Zur Numerischen Auslegung von
Klebverbindungen Mit Lackierten Fügeteilen.” 25. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik, edited by DECHEMA, 2025.'
short: 'J. Hofmann, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 25. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik, 2025.'
conference:
end_date: 2025-02-19
location: Köln
name: '25. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2025-02-18
corporate_editor:
- DECHEMA
date_created: 2026-03-03T08:26:48Z
date_updated: 2026-03-03T08:55:23Z
department:
- _id: '157'
language:
- iso: eng
publication: '25. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten
Fügeteilen
type: conference_abstract
user_id: '104312'
year: '2025'
...
---
_id: '64611'
abstract:
- lang: ger
text: "Für die Aufrechterhaltung der natürlichen Ressourcen ist eine effiziente
Nutzung dieser essenziell. Vor diesem Hintergrund untersucht das vorliegende Paper
die Rolle der Kreislaufwirtschaft als wegweisendes Wirtschaftsmodell, das von
der Europäischen Union gefördert wird. Ziel der Kreislaufwirtschaft ist es, den
Ressourcenverbrauch und die Abfallproduktion zu minimieren, indem ein kontinuierlicher
Kreislauf aus Nutzung, Wiederverwendung und Recycling von Materialien geschaffen
wird. \r\nEin zentraler Aspekt dabei ist der Produktentwicklungsprozess (PEP)
- ein vielschichtiger Prozess mit zahlreichen Einflussfaktoren und theoretisch
unbegrenzten Gestaltungsmöglichkeiten. Diese Vielfalt führt jedoch zu erheblichen
Entscheidungsunsicherheiten, die die Umsetzung von Kreislaufwirtschaftsprinzipien
erschweren können. Um diese Herausforderungen zu adressieren, wird ein methodischer
Prozess vorgestellt, der eine systematische Klassifizierung im Zusammenhang mit
umliegenden Bauteilen ermöglicht. Die Methodik basiert auf einer strukturierten
Bewertung von Bauteilen hinsichtlich ihrer Relevanz für die Kreislaufwirtschaft.
Dabei werden zentrale Aspekte wie Wiederverwendbarkeit, Recyclingfähigkeit und
Ressourceneffizienz berücksichtigt, darunter: \r\n•\tHandelt es sich um ein Gebrauchs-
oder Verbrauchsprodukt?\r\n•\tIst das Bauteil eine Wiederverwendung oder eine
Neufertigung?\r\n•\tIst das Bauteil standardisiert, zugekauft oder individuell
ausgerichtet?\r\n•\tWelche primäre Funktion nimmt das Bauteil ein?\r\nDiese strukturierte
Klassifizierung unterstützt die Entscheidungsfindung bereits früh im PEP. Sie
ermöglicht es Produktentwickelnden, Potenziale für die Kreislaufwirtschaft frühzeitig
zu erkennen und gezielt nachhaltige Maßnahmen zu ergreifen.\r\nDie entwickelte
Methodik bildet somit eine Grundlage für die Integration kreislaufwirtschaftlicher
Prinzipien in den Entwicklungsprozess. Insbesondere im Kontext moderner Anforderungen
des Mobility Management zeigt sich ihr Potenzial, nachhaltige Innovationen gezielt
zu fördern und die Umsetzung der Kreislaufwirtschaft in der industriellen Praxis
zu erleichtern."
author:
- first_name: Katharina
full_name: Rohde, Katharina
id: '70143'
last_name: Rohde
orcid: 0009-0000-5738-7304
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Finn Lukas
full_name: Budde, Finn Lukas
id: '74585'
last_name: Budde
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Rohde K, Ott M, Budde FL, Mozgova I. Optimierung modularer Produkte für die
Mobilität: Ein Klassifizierungsrahmen für zirkuläre Produkte. In: Proff H, ed.
Solving Conflicts on the Way to Sustainable Mobility: Technische und betriebswirtschaftliche
Aspekte. Springer Nature Meteor.'
apa: 'Rohde, K., Ott, M., Budde, F. L., & Mozgova, I. (n.d.). Optimierung modularer
Produkte für die Mobilität: Ein Klassifizierungsrahmen für zirkuläre Produkte.
In H. Proff (Ed.), Solving Conflicts on the Way to Sustainable Mobility: Technische
und betriebswirtschaftliche Aspekte. Springer Nature Meteor.'
bibtex: '@inproceedings{Rohde_Ott_Budde_Mozgova, title={Optimierung modularer Produkte
für die Mobilität: Ein Klassifizierungsrahmen für zirkuläre Produkte}, booktitle={Solving
Conflicts on the Way to Sustainable Mobility: Technische und betriebswirtschaftliche
Aspekte}, publisher={Springer Nature Meteor}, author={Rohde, Katharina and Ott,
Manuel and Budde, Finn Lukas and Mozgova, Iryna}, editor={Proff, Heike} }'
chicago: 'Rohde, Katharina, Manuel Ott, Finn Lukas Budde, and Iryna Mozgova. “Optimierung
modularer Produkte für die Mobilität: Ein Klassifizierungsrahmen für zirkuläre
Produkte.” In Solving Conflicts on the Way to Sustainable Mobility: Technische
und betriebswirtschaftliche Aspekte, edited by Heike Proff. Springer Nature
Meteor, n.d.'
ieee: 'K. Rohde, M. Ott, F. L. Budde, and I. Mozgova, “Optimierung modularer Produkte
für die Mobilität: Ein Klassifizierungsrahmen für zirkuläre Produkte,” in Solving
Conflicts on the Way to Sustainable Mobility: Technische und betriebswirtschaftliche
Aspekte, Duisburg.'
mla: 'Rohde, Katharina, et al. “Optimierung modularer Produkte für die Mobilität:
Ein Klassifizierungsrahmen für zirkuläre Produkte.” Solving Conflicts on the
Way to Sustainable Mobility: Technische und betriebswirtschaftliche Aspekte,
edited by Heike Proff, Springer Nature Meteor.'
short: 'K. Rohde, M. Ott, F.L. Budde, I. Mozgova, in: H. Proff (Ed.), Solving Conflicts
on the Way to Sustainable Mobility: Technische und betriebswirtschaftliche Aspekte,
Springer Nature Meteor, n.d.'
conference:
location: Duisburg
name: 17. Wissenschaftsforum Mobilität
start_date: 2025-05-15
date_created: 2026-02-24T12:40:57Z
date_updated: 2026-03-03T11:21:06Z
ddc:
- '620'
department:
- _id: '741'
editor:
- first_name: Heike
full_name: Proff, Heike
last_name: Proff
has_accepted_license: '1'
language:
- iso: ger
main_file_link:
- open_access: '1'
oa: '1'
publication: 'Solving Conflicts on the Way to Sustainable Mobility: Technische und
betriebswirtschaftliche Aspekte'
publication_status: inpress
publisher: Springer Nature Meteor
quality_controlled: '1'
status: public
title: 'Optimierung modularer Produkte für die Mobilität: Ein Klassifizierungsrahmen
für zirkuläre Produkte'
type: conference
user_id: '70143'
year: '2025'
...
---
_id: '64804'
abstract:
- lang: ger
text: "Das Ultraschallschweißen ist in der Verpackungs-, Halbleiter- und Automobilindustrie
weit verbreitet. Neben dem Schweißen von Blechen bietet es die Möglichkeit, Folien
oder Hülsen zu verschweißen. Konventionelle Schweißsysteme arbeiten mit Längs-
oder Biegeschwingungen, deren Hauptanteil in der Schweißebene liegt. Der orthogonale
Anteil verursacht zusätzliche Belastungen im Schweißgut. Bei der Verwendung von
Torsionsschwingungen wird die orthogonale Komponente der Schwingung nahezu eliminiert.
\r\nIn diesem Beitrag wird ein System vorgestellt, bei dem die Torsionsschwingung
durch tangentiale Polarisation der Piezokeramiken erzeugt wird. Der Transducer
ist axial oberhalb des Schweißpunktes platziert, sodass die Normalkraft momentfrei
aufgebracht wird. Das Schweißwerkzeug weicht beim Schweißvorgang daher seitlich
nicht aus. Zudem wird das Schweißen an schwer zugänglichen Positionen vereinfacht,
da der Systemaufbau deutlich schlanker ist als konventionelle Ultraschallschweißsysteme.\r\nDie
Auslegung des Torsionsschwingsystems stellt eine Herausforderung dar. Insbesondere
muss die Lagerung des Schwingers betrachtet werden, da diese die Normalkraft übertragen
und zugleich die Schwingung nicht beeinträchtigen soll. Der Schweißprozess bewirkt
eine Verschiebung von Schwingungsknoten und Resonanzfrequenzen. Im Rahmen des
Vortrags wird ein Finite-Elemente-Simulationsmodell vorgestellt, das in Kombination
mit einem Lastmodell das Systemverhalten während des Schweißprozesses abbildet.
Die Geometrie des Transducers wurde schrittweise so angepasst, dass die Schwingamplitude
im Lagerungspunkt minimiert wird. \r\n"
author:
- first_name: Markus Daniel
full_name: Dohmen, Markus Daniel
id: '69217'
last_name: Dohmen
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Dohmen MD, Bornmann P, Littmann W, Hemsel T, Sextro W. Modellgestützte Optimierung
eines Ultraschall-Torsionsschweißsystems. In: ; 2025.'
apa: Dohmen, M. D., Bornmann, P., Littmann, W., Hemsel, T., & Sextro, W. (2025).
Modellgestützte Optimierung eines Ultraschall-Torsionsschweißsystems.
bibtex: '@inproceedings{Dohmen_Bornmann_Littmann_Hemsel_Sextro_2025, title={Modellgestützte
Optimierung eines Ultraschall-Torsionsschweißsystems}, author={Dohmen, Markus
Daniel and Bornmann, Peter and Littmann, Walter and Hemsel, Tobias and Sextro,
Walter}, year={2025} }'
chicago: Dohmen, Markus Daniel, Peter Bornmann, Walter Littmann, Tobias Hemsel,
and Walter Sextro. “Modellgestützte Optimierung Eines Ultraschall-Torsionsschweißsystems,”
2025.
ieee: M. D. Dohmen, P. Bornmann, W. Littmann, T. Hemsel, and W. Sextro, “Modellgestützte
Optimierung eines Ultraschall-Torsionsschweißsystems,” 2025.
mla: Dohmen, Markus Daniel, et al. Modellgestützte Optimierung Eines Ultraschall-Torsionsschweißsystems.
2025.
short: 'M.D. Dohmen, P. Bornmann, W. Littmann, T. Hemsel, W. Sextro, in: 2025.'
date_created: 2026-03-02T12:02:08Z
date_updated: 2026-03-03T13:57:25Z
ddc:
- '620'
department:
- _id: '151'
file:
- access_level: closed
content_type: application/pdf
creator: hemsel
date_created: 2026-03-02T12:01:28Z
date_updated: 2026-03-02T12:01:28Z
file_id: '64805'
file_name: Dohmen_UPB_LDM_IMAPS_2025.pdf
file_size: 1912154
relation: main_file
success: 1
file_date_updated: 2026-03-02T12:01:28Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: Modellgestützte Optimierung eines Ultraschall-Torsionsschweißsystems
type: conference
user_id: '210'
year: '2025'
...
---
_id: '61223'
abstract:
- lang: eng
text: 'Contemporary debates about artificial intelligence (AI) still treat
automation as a straightforward substitution of human labor by machines. Drawing
on Goffman’s dramaturgical sociology, this paper reframes AI in the workplace
as supplementary rather than substitutive
automation. We argue that the central—but routinely overlooked—terrain of struggle
is symbolic-interactional: workers continuously stage, conceal, and re-negotiate
what counts as “real” work and professional competence. Large language models
(LLMs) such as ChatGPT exemplify this dynamic. They quietly take over the invisible,
routinised tasks that underpin cognitive occupations (editing, summarizing, first-draft
production) while leaving humans to enact the highly visible or relational facets
that sustain occupational prestige. Drawing on diverse sources to illustrate our
theoretical argument, we show how individual workers, dramaturgical teams, and
entire professional fields manage impressions of expertise in order to counter
status threats, renegotiate fees, or obscure the extent of AI assistance. The
paper itself, having been intentionally written with the ‘aid’ of all presently
available frontier AI models, serves as a meta-reflexive performance of professional
self-staging. The dramaturgical framework clarifies why utopian tales of friction-free
augmentation and dystopian narratives of total displacement both misread how automation
is actually unfolding. By foregrounding visibility, obfuscation, and impression
management, the article presents a differentiated case for AI’s impact on the
performative structure of work, outlines diagnostic tools for assessing real-world
AI exposure beyond hype-driven headlines, and argues for a more human-centered
basis for evaluating policy responses to the ‘fourth industrial revolution.’ In
short, AI enters the labor process not as an autonomous actor, but as a prop within
an ongoing social performance—one whose scripts, stages, and audiences remain
irreducibly human.'
article_number: '1614473'
author:
- first_name: Nils
full_name: Klowait, Nils
id: '98454'
last_name: Klowait
orcid: 0000-0002-7347-099X
- first_name: Maria
full_name: Erofeeva, Maria
last_name: Erofeeva
citation:
ama: Klowait N, Erofeeva M. The presentation of self in the age of ChatGPT. Frontiers
in Sociology. 2025;10. doi:10.3389/fsoc.2025.1614473
apa: Klowait, N., & Erofeeva, M. (2025). The presentation of self in the age
of ChatGPT. Frontiers in Sociology, 10, Article 1614473. https://doi.org/10.3389/fsoc.2025.1614473
bibtex: '@article{Klowait_Erofeeva_2025, title={The presentation of self in the
age of ChatGPT}, volume={10}, DOI={10.3389/fsoc.2025.1614473},
number={1614473}, journal={Frontiers in Sociology}, publisher={Frontiers Media
SA}, author={Klowait, Nils and Erofeeva, Maria}, year={2025} }'
chicago: Klowait, Nils, and Maria Erofeeva. “The Presentation of Self in the Age
of ChatGPT.” Frontiers in Sociology 10 (2025). https://doi.org/10.3389/fsoc.2025.1614473.
ieee: 'N. Klowait and M. Erofeeva, “The presentation of self in the age of ChatGPT,”
Frontiers in Sociology, vol. 10, Art. no. 1614473, 2025, doi: 10.3389/fsoc.2025.1614473.'
mla: Klowait, Nils, and Maria Erofeeva. “The Presentation of Self in the Age of
ChatGPT.” Frontiers in Sociology, vol. 10, 1614473, Frontiers Media SA,
2025, doi:10.3389/fsoc.2025.1614473.
short: N. Klowait, M. Erofeeva, Frontiers in Sociology 10 (2025).
date_created: 2025-09-11T14:08:31Z
date_updated: 2025-09-11T14:10:30Z
department:
- _id: '603'
doi: 10.3389/fsoc.2025.1614473
intvolume: ' 10'
language:
- iso: eng
project:
- _id: '119'
name: TRR 318 - Project Area Ö
publication: Frontiers in Sociology
publication_identifier:
issn:
- 2297-7775
publication_status: published
publisher: Frontiers Media SA
status: public
title: The presentation of self in the age of ChatGPT
type: journal_article
user_id: '98454'
volume: 10
year: '2025'
...
---
_id: '61226'
author:
- first_name: Maria
full_name: Erofeeva, Maria
last_name: Erofeeva
- first_name: Nils
full_name: Klowait, Nils
id: '98454'
last_name: Klowait
orcid: 0000-0002-7347-099X
- first_name: Mikael
full_name: Belov, Mikael
last_name: Belov
- first_name: Yoann
full_name: Soulié, Yoann
last_name: Soulié
citation:
ama: 'Erofeeva M, Klowait N, Belov M, Soulié Y. Leveraging VR Tools for Inclusive
Education: Implications from Sign Language Learning in VRChat. In: Communications
in Computer and Information Science. Springer Nature Switzerland; 2025. doi:10.1007/978-3-031-98080-0_10'
apa: 'Erofeeva, M., Klowait, N., Belov, M., & Soulié, Y. (2025). Leveraging
VR Tools for Inclusive Education: Implications from Sign Language Learning in VRChat.
In Communications in Computer and Information Science. Springer Nature
Switzerland. https://doi.org/10.1007/978-3-031-98080-0_10'
bibtex: '@inbook{Erofeeva_Klowait_Belov_Soulié_2025, place={Cham}, title={Leveraging
VR Tools for Inclusive Education: Implications from Sign Language Learning in VRChat},
DOI={10.1007/978-3-031-98080-0_10},
booktitle={Communications in Computer and Information Science}, publisher={Springer
Nature Switzerland}, author={Erofeeva, Maria and Klowait, Nils and Belov, Mikael
and Soulié, Yoann}, year={2025} }'
chicago: 'Erofeeva, Maria, Nils Klowait, Mikael Belov, and Yoann Soulié. “Leveraging
VR Tools for Inclusive Education: Implications from Sign Language Learning in VRChat.”
In Communications in Computer and Information Science. Cham: Springer Nature
Switzerland, 2025. https://doi.org/10.1007/978-3-031-98080-0_10.'
ieee: 'M. Erofeeva, N. Klowait, M. Belov, and Y. Soulié, “Leveraging VR Tools for Inclusive
Education: Implications from Sign Language Learning in VRChat,” in Communications
in Computer and Information Science, Cham: Springer Nature Switzerland, 2025.'
mla: 'Erofeeva, Maria, et al. “Leveraging VR Tools for Inclusive Education: Implications
from Sign Language Learning in VRChat.” Communications in Computer and Information
Science, Springer Nature Switzerland, 2025, doi:10.1007/978-3-031-98080-0_10.'
short: 'M. Erofeeva, N. Klowait, M. Belov, Y. Soulié, in: Communications in Computer
and Information Science, Springer Nature Switzerland, Cham, 2025.'
date_created: 2025-09-11T14:11:31Z
date_updated: 2025-09-11T14:11:47Z
department:
- _id: '603'
doi: 10.1007/978-3-031-98080-0_10
language:
- iso: eng
place: Cham
publication: Communications in Computer and Information Science
publication_identifier:
isbn:
- '9783031980794'
- '9783031980800'
issn:
- 1865-0929
- 1865-0937
publication_status: published
publisher: Springer Nature Switzerland
status: public
title: 'Leveraging VR Tools for Inclusive Education: Implications from Sign Language
Learning in VRChat'
type: book_chapter
user_id: '98454'
year: '2025'
...
---
_id: '61341'
author:
- first_name: Janis
full_name: Beimdiek, Janis
id: '45788'
last_name: Beimdiek
orcid: 0009-0001-1348-496X
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Beimdiek J, Schmid H-J. SFS-gestützte Synthese von Katalysatorpartikeln zur
selektiven katalytischen Reduktion von NOx. In: ; 2025.'
apa: Beimdiek, J., & Schmid, H.-J. (2025). SFS-gestützte Synthese von Katalysatorpartikeln
zur selektiven katalytischen Reduktion von NOx. 32. Deutscher Flammentag,
Paderborn.
bibtex: '@inproceedings{Beimdiek_Schmid_2025, title={SFS-gestützte Synthese von
Katalysatorpartikeln zur selektiven katalytischen Reduktion von NOx}, author={Beimdiek,
Janis and Schmid, Hans-Joachim}, year={2025} }'
chicago: Beimdiek, Janis, and Hans-Joachim Schmid. “SFS-Gestützte Synthese von Katalysatorpartikeln
Zur Selektiven Katalytischen Reduktion von NOx,” 2025.
ieee: J. Beimdiek and H.-J. Schmid, “SFS-gestützte Synthese von Katalysatorpartikeln
zur selektiven katalytischen Reduktion von NOx,” presented at the 32. Deutscher
Flammentag, Paderborn, 2025.
mla: Beimdiek, Janis, and Hans-Joachim Schmid. SFS-Gestützte Synthese von Katalysatorpartikeln
Zur Selektiven Katalytischen Reduktion von NOx. 2025.
short: 'J. Beimdiek, H.-J. Schmid, in: 2025.'
conference:
end_date: 2025-09-17
location: Paderborn
name: 32. Deutscher Flammentag
start_date: 2025-09-15
date_created: 2025-09-18T08:37:33Z
date_updated: 2025-09-18T08:50:55Z
ddc:
- '660'
department:
- _id: '150'
- _id: '9'
file:
- access_level: closed
content_type: application/pdf
creator: jludwig
date_created: 2025-09-18T08:36:42Z
date_updated: 2025-09-18T08:36:42Z
file_id: '61342'
file_name: Manuskript_JB_Flammentag2025.pdf
file_size: 490711
relation: main_file
success: 1
file_date_updated: 2025-09-18T08:36:42Z
has_accepted_license: '1'
language:
- iso: eng
status: public
title: SFS-gestützte Synthese von Katalysatorpartikeln zur selektiven katalytischen
Reduktion von NOx
type: conference
user_id: '45788'
year: '2025'
...
---
_id: '61343'
author:
- first_name: Janis
full_name: Beimdiek, Janis
id: '45788'
last_name: Beimdiek
orcid: 0009-0001-1348-496X
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Beimdiek J, Schmid H-J. Influence of surface impurities on the catalytic activity
of nanoparticles synthesized by a spray flame synthesis (oral presentation). In:
; 2025.'
apa: Beimdiek, J., & Schmid, H.-J. (2025). Influence of surface impurities
on the catalytic activity of nanoparticles synthesized by a spray flame synthesis
(oral presentation). International Congress on Particle Technology (PARTEC),
Nürnberg.
bibtex: '@inproceedings{Beimdiek_Schmid_2025, title={Influence of surface impurities
on the catalytic activity of nanoparticles synthesized by a spray flame synthesis
(oral presentation)}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2025}
}'
chicago: Beimdiek, Janis, and Hans-Joachim Schmid. “Influence of Surface Impurities
on the Catalytic Activity of Nanoparticles Synthesized by a Spray Flame Synthesis
(Oral Presentation),” 2025.
ieee: J. Beimdiek and H.-J. Schmid, “Influence of surface impurities on the catalytic
activity of nanoparticles synthesized by a spray flame synthesis (oral presentation),”
presented at the International Congress on Particle Technology (PARTEC), Nürnberg,
2025.
mla: Beimdiek, Janis, and Hans-Joachim Schmid. Influence of Surface Impurities
on the Catalytic Activity of Nanoparticles Synthesized by a Spray Flame Synthesis
(Oral Presentation). 2025.
short: 'J. Beimdiek, H.-J. Schmid, in: 2025.'
conference:
end_date: 2025-09-25
location: Nürnberg
name: International Congress on Particle Technology (PARTEC)
start_date: 2025-09-23
date_created: 2025-09-18T08:43:43Z
date_updated: 2025-09-18T08:54:36Z
department:
- _id: '150'
- _id: '9'
language:
- iso: eng
status: public
title: Influence of surface impurities on the catalytic activity of nanoparticles
synthesized by a spray flame synthesis (oral presentation)
type: conference_abstract
user_id: '45788'
year: '2025'
...
---
_id: '59566'
author:
- first_name: Janis
full_name: Beimdiek, Janis
id: '45788'
last_name: Beimdiek
orcid: 0009-0001-1348-496X
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Beimdiek J, Schmid H-J. Selektive katalytische Reduktion von NOx an gasphasensynthetisierten
Katalysatorpartikeln (Vortrag). In: ; 2025.'
apa: Beimdiek, J., & Schmid, H.-J. (2025). Selektive katalytische Reduktion
von NOx an gasphasensynthetisierten Katalysatorpartikeln (Vortrag). Jahrestreffen
der DECHEMA / VDI Fachgruppe Aerosoltechnik (AT) 2025, Clausthal-Zellerfeld.
bibtex: '@inproceedings{Beimdiek_Schmid_2025, title={Selektive katalytische Reduktion
von NOx an gasphasensynthetisierten Katalysatorpartikeln (Vortrag)}, author={Beimdiek,
Janis and Schmid, Hans-Joachim}, year={2025} }'
chicago: Beimdiek, Janis, and Hans-Joachim Schmid. “Selektive katalytische Reduktion
von NOx an gasphasensynthetisierten Katalysatorpartikeln (Vortrag),” 2025.
ieee: J. Beimdiek and H.-J. Schmid, “Selektive katalytische Reduktion von NOx an
gasphasensynthetisierten Katalysatorpartikeln (Vortrag),” presented at the Jahrestreffen
der DECHEMA / VDI Fachgruppe Aerosoltechnik (AT) 2025, Clausthal-Zellerfeld, 2025.
mla: Beimdiek, Janis, and Hans-Joachim Schmid. Selektive katalytische Reduktion
von NOx an gasphasensynthetisierten Katalysatorpartikeln (Vortrag). 2025.
short: 'J. Beimdiek, H.-J. Schmid, in: 2025.'
conference:
end_date: 2025-03-27
location: Clausthal-Zellerfeld
name: Jahrestreffen der DECHEMA / VDI Fachgruppe Aerosoltechnik (AT) 2025
start_date: 2025-03-26
date_created: 2025-04-14T11:42:27Z
date_updated: 2025-09-18T08:49:41Z
department:
- _id: '150'
- _id: '9'
language:
- iso: ger
status: public
title: Selektive katalytische Reduktion von NOx an gasphasensynthetisierten Katalysatorpartikeln
(Vortrag)
type: conference_abstract
user_id: '45788'
year: '2025'
...
---
_id: '61346'
author:
- first_name: Abderazzak
full_name: El Gabbouhi, Abderazzak
last_name: El Gabbouhi
- first_name: Orlando
full_name: Massopo, Orlando
id: '98419'
last_name: Massopo
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: El Gabbouhi A, Massopo O, Jesinghausen S, Schmid H-J. Untersuchung Des Einflusses
Der Zusammensetzung von Lösungsmitteln Und Gasen Bei Der Herstellung Nanoskaliger
Eisenoxide Mittels Sprühflammensynthese.
apa: El Gabbouhi, A., Massopo, O., Jesinghausen, S., & Schmid, H.-J. (n.d.).
Untersuchung des Einflusses der Zusammensetzung von Lösungsmitteln und Gasen
bei der Herstellung nanoskaliger Eisenoxide mittels Sprühflammensynthese.
bibtex: '@book{El Gabbouhi_Massopo_Jesinghausen_Schmid, title={Untersuchung des
Einflusses der Zusammensetzung von Lösungsmitteln und Gasen bei der Herstellung
nanoskaliger Eisenoxide mittels Sprühflammensynthese}, author={El Gabbouhi, Abderazzak
and Massopo, Orlando and Jesinghausen, Steffen and Schmid, Hans-Joachim} }'
chicago: El Gabbouhi, Abderazzak, Orlando Massopo, Steffen Jesinghausen, and Hans-Joachim
Schmid. Untersuchung Des Einflusses Der Zusammensetzung von Lösungsmitteln
Und Gasen Bei Der Herstellung Nanoskaliger Eisenoxide Mittels Sprühflammensynthese,
n.d.
ieee: A. El Gabbouhi, O. Massopo, S. Jesinghausen, and H.-J. Schmid, Untersuchung
des Einflusses der Zusammensetzung von Lösungsmitteln und Gasen bei der Herstellung
nanoskaliger Eisenoxide mittels Sprühflammensynthese. .
mla: El Gabbouhi, Abderazzak, et al. Untersuchung Des Einflusses Der Zusammensetzung
von Lösungsmitteln Und Gasen Bei Der Herstellung Nanoskaliger Eisenoxide Mittels
Sprühflammensynthese.
short: A. El Gabbouhi, O. Massopo, S. Jesinghausen, H.-J. Schmid, Untersuchung Des
Einflusses Der Zusammensetzung von Lösungsmitteln Und Gasen Bei Der Herstellung
Nanoskaliger Eisenoxide Mittels Sprühflammensynthese, n.d.
date_created: 2025-09-18T10:28:36Z
date_updated: 2025-09-18T11:17:41Z
department:
- _id: '150'
language:
- iso: eng
publication_status: unpublished
status: public
supervisor:
- first_name: Orlando
full_name: Massopo, Orlando
id: '98419'
last_name: Massopo
title: Untersuchung des Einflusses der Zusammensetzung von Lösungsmitteln und Gasen
bei der Herstellung nanoskaliger Eisenoxide mittels Sprühflammensynthese
type: mastersthesis
user_id: '98419'
year: '2025'
...
---
_id: '61396'
author:
- first_name: Florian
full_name: Nölle, Florian
id: '50522'
last_name: Nölle
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Leon Alexander
full_name: Bentrup, Leon Alexander
id: '65001'
last_name: Bentrup
- first_name: Katrin
full_name: Temmen, Katrin
id: '30086'
last_name: Temmen
citation:
ama: 'Nölle F, Schmid H-J, Bentrup LA, Temmen K. Erfolgreich Studieren - sinnvolle
Lernstrategien erlernen (Posterbeitrag). In: MINT-Symposium. ; 2025.'
apa: Nölle, F., Schmid, H.-J., Bentrup, L. A., & Temmen, K. (2025). Erfolgreich
Studieren - sinnvolle Lernstrategien erlernen (Posterbeitrag). MINT-Symposium.
MINT-Symposium, Nürnberg.
bibtex: '@inproceedings{Nölle_Schmid_Bentrup_Temmen_2025, place={Nürnberg}, title={Erfolgreich
Studieren - sinnvolle Lernstrategien erlernen (Posterbeitrag)}, booktitle={MINT-Symposium},
author={Nölle, Florian and Schmid, Hans-Joachim and Bentrup, Leon Alexander and
Temmen, Katrin}, year={2025} }'
chicago: Nölle, Florian, Hans-Joachim Schmid, Leon Alexander Bentrup, and Katrin
Temmen. “Erfolgreich Studieren - sinnvolle Lernstrategien erlernen (Posterbeitrag).”
In MINT-Symposium. Nürnberg, 2025.
ieee: F. Nölle, H.-J. Schmid, L. A. Bentrup, and K. Temmen, “Erfolgreich Studieren
- sinnvolle Lernstrategien erlernen (Posterbeitrag),” presented at the MINT-Symposium,
Nürnberg, 2025.
mla: Nölle, Florian, et al. “Erfolgreich Studieren - sinnvolle Lernstrategien erlernen
(Posterbeitrag).” MINT-Symposium, 2025.
short: 'F. Nölle, H.-J. Schmid, L.A. Bentrup, K. Temmen, in: MINT-Symposium, Nürnberg,
2025.'
conference:
end_date: 2025-09-19
location: Nürnberg
name: MINT-Symposium
start_date: 2025-09-17
date_created: 2025-09-22T11:39:21Z
date_updated: 2025-09-22T12:46:53Z
ddc:
- '370'
department:
- _id: '150'
- _id: '300'
file:
- access_level: open_access
content_type: application/pdf
creator: noelflor
date_created: 2025-09-22T11:36:05Z
date_updated: 2025-09-22T12:46:35Z
file_id: '61397'
file_name: 250922_MINT_Erfolgreich studieren.pdf
file_size: 349667
relation: main_file
file_date_updated: 2025-09-22T12:46:35Z
has_accepted_license: '1'
language:
- iso: ger
oa: '1'
place: Nürnberg
project:
- _id: '1387'
name: DigiSelF - Digitalisierung als Herausforderung und Innovation in der Hochschullehre
publication: MINT-Symposium
publication_status: published
status: public
title: Erfolgreich Studieren - sinnvolle Lernstrategien erlernen (Posterbeitrag)
type: conference_abstract
user_id: '50522'
year: '2025'
...
---
_id: '61271'
author:
- first_name: Cedric
full_name: Tschöpe, Cedric
last_name: Tschöpe
citation:
ama: 'Tschöpe C. Entwicklung flammgeschützter Kunststoffpulver für das Lasersintern:
Einfluss von Phosphor-, Füllstoffanteilen und Belichtungsparametern.; 2025.'
apa: 'Tschöpe, C. (2025). Entwicklung flammgeschützter Kunststoffpulver für das
Lasersintern: Einfluss von Phosphor-, Füllstoffanteilen und Belichtungsparametern.'
bibtex: '@book{Tschöpe_2025, title={Entwicklung flammgeschützter Kunststoffpulver
für das Lasersintern: Einfluss von Phosphor-, Füllstoffanteilen und Belichtungsparametern},
author={Tschöpe, Cedric}, year={2025} }'
chicago: 'Tschöpe, Cedric. Entwicklung flammgeschützter Kunststoffpulver für
das Lasersintern: Einfluss von Phosphor-, Füllstoffanteilen und Belichtungsparametern,
2025.'
ieee: 'C. Tschöpe, Entwicklung flammgeschützter Kunststoffpulver für das Lasersintern:
Einfluss von Phosphor-, Füllstoffanteilen und Belichtungsparametern. 2025.'
mla: 'Tschöpe, Cedric. Entwicklung flammgeschützter Kunststoffpulver für das
Lasersintern: Einfluss von Phosphor-, Füllstoffanteilen und Belichtungsparametern.
2025.'
short: 'C. Tschöpe, Entwicklung flammgeschützter Kunststoffpulver für das Lasersintern:
Einfluss von Phosphor-, Füllstoffanteilen und Belichtungsparametern, 2025.'
date_created: 2025-09-15T08:11:45Z
date_updated: 2025-10-01T08:53:45Z
department:
- _id: '150'
- _id: '624'
- _id: '9'
language:
- iso: ger
status: public
supervisor:
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Fabian
full_name: Neitzel, Fabian
id: '72307'
last_name: Neitzel
orcid: '0009-0004-8412-3645 '
title: 'Entwicklung flammgeschützter Kunststoffpulver für das Lasersintern: Einfluss
von Phosphor-, Füllstoffanteilen und Belichtungsparametern'
type: mastersthesis
user_id: '72307'
year: '2025'
...
---
_id: '61485'
author:
- first_name: Thomas
full_name: Frye, Thomas
last_name: Frye
citation:
ama: Frye T. Untersuchung Der Wechselwirkungen Zwischen Aluminiumdiethylphosphinat
Und Zinkbasierten Füllstoffen Als Synergistische Flammschutzmittel in Polyamid
12 Für Das Selektive Lasersintern.; 2025.
apa: Frye, T. (2025). Untersuchung der Wechselwirkungen zwischen Aluminiumdiethylphosphinat
und zinkbasierten Füllstoffen als synergistische Flammschutzmittel in Polyamid
12 für das selektive Lasersintern.
bibtex: '@book{Frye_2025, title={Untersuchung der Wechselwirkungen zwischen Aluminiumdiethylphosphinat
und zinkbasierten Füllstoffen als synergistische Flammschutzmittel in Polyamid
12 für das selektive Lasersintern}, author={Frye, Thomas}, year={2025} }'
chicago: Frye, Thomas. Untersuchung Der Wechselwirkungen Zwischen Aluminiumdiethylphosphinat
Und Zinkbasierten Füllstoffen Als Synergistische Flammschutzmittel in Polyamid
12 Für Das Selektive Lasersintern, 2025.
ieee: T. Frye, Untersuchung der Wechselwirkungen zwischen Aluminiumdiethylphosphinat
und zinkbasierten Füllstoffen als synergistische Flammschutzmittel in Polyamid
12 für das selektive Lasersintern. 2025.
mla: Frye, Thomas. Untersuchung Der Wechselwirkungen Zwischen Aluminiumdiethylphosphinat
Und Zinkbasierten Füllstoffen Als Synergistische Flammschutzmittel in Polyamid
12 Für Das Selektive Lasersintern. 2025.
short: T. Frye, Untersuchung Der Wechselwirkungen Zwischen Aluminiumdiethylphosphinat
Und Zinkbasierten Füllstoffen Als Synergistische Flammschutzmittel in Polyamid
12 Für Das Selektive Lasersintern, 2025.
date_created: 2025-10-01T08:55:57Z
date_updated: 2025-10-01T08:56:00Z
department:
- _id: '150'
- _id: '624'
- _id: '9'
language:
- iso: eng
status: public
supervisor:
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Fabian
full_name: Neitzel, Fabian
id: '72307'
last_name: Neitzel
orcid: '0009-0004-8412-3645 '
title: Untersuchung der Wechselwirkungen zwischen Aluminiumdiethylphosphinat und zinkbasierten
Füllstoffen als synergistische Flammschutzmittel in Polyamid 12 für das selektive
Lasersintern
type: mastersthesis
user_id: '72307'
year: '2025'
...
---
_id: '61526'
author:
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: 'Philipp '
full_name: 'Bähr, Philipp '
last_name: Bähr
- first_name: Lilia
full_name: Schuster, Lilia
last_name: Schuster
- first_name: Julia
full_name: Westhoff, Julia
last_name: Westhoff
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Enes
full_name: Ibeski, Enes
last_name: Ibeski
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Olfert V, Bähr P, Schuster L, et al. Failure behavior prediction for resistance
spot-welded three-layered dissimilar joints with advanced high-strength steel.
Journal of Manufacturing Processes. 2025;154:311-331. doi:https://doi.org/10.1016/j.jmapro.2025.09.077
apa: Olfert, V., Bähr, P., Schuster, L., Westhoff, J., Yang, K., Ibeski, E., Hein,
D., Sommer, S., & Meschut, G. (2025). Failure behavior prediction for resistance
spot-welded three-layered dissimilar joints with advanced high-strength steel.
Journal of Manufacturing Processes, 154, 311–331. https://doi.org/10.1016/j.jmapro.2025.09.077
bibtex: '@article{Olfert_Bähr_Schuster_Westhoff_Yang_Ibeski_Hein_Sommer_Meschut_2025,
title={Failure behavior prediction for resistance spot-welded three-layered dissimilar
joints with advanced high-strength steel}, volume={154}, DOI={https://doi.org/10.1016/j.jmapro.2025.09.077},
journal={Journal of Manufacturing Processes}, publisher={Elsevier}, author={Olfert,
Viktoria and Bähr, Philipp and Schuster, Lilia and Westhoff, Julia and Yang,
Keke and Ibeski, Enes and Hein, David and Sommer, Silke and Meschut, Gerson},
year={2025}, pages={311–331} }'
chicago: 'Olfert, Viktoria, Philipp Bähr, Lilia Schuster, Julia Westhoff, Keke
Yang, Enes Ibeski, David Hein, Silke Sommer, and Gerson Meschut. “Failure Behavior
Prediction for Resistance Spot-Welded Three-Layered Dissimilar Joints with Advanced
High-Strength Steel.” Journal of Manufacturing Processes 154 (2025): 311–31.
https://doi.org/10.1016/j.jmapro.2025.09.077.'
ieee: 'V. Olfert et al., “Failure behavior prediction for resistance spot-welded
three-layered dissimilar joints with advanced high-strength steel,” Journal
of Manufacturing Processes, vol. 154, pp. 311–331, 2025, doi: https://doi.org/10.1016/j.jmapro.2025.09.077.'
mla: Olfert, Viktoria, et al. “Failure Behavior Prediction for Resistance Spot-Welded
Three-Layered Dissimilar Joints with Advanced High-Strength Steel.” Journal
of Manufacturing Processes, vol. 154, Elsevier, 2025, pp. 311–31, doi:https://doi.org/10.1016/j.jmapro.2025.09.077.
short: V. Olfert, P. Bähr, L. Schuster, J. Westhoff, K. Yang, E. Ibeski, D. Hein,
S. Sommer, G. Meschut, Journal of Manufacturing Processes 154 (2025) 311–331.
date_created: 2025-10-06T16:11:28Z
date_updated: 2025-10-06T16:19:53Z
ddc:
- '620'
department:
- _id: '157'
doi: https://doi.org/10.1016/j.jmapro.2025.09.077
file:
- access_level: open_access
content_type: application/pdf
creator: kekeyang
date_created: 2025-10-06T16:11:21Z
date_updated: 2025-10-06T16:11:21Z
file_id: '61527'
file_name: 1-s2.0-S152661252501059X-main.pdf
file_size: 7973182
relation: main_file
file_date_updated: 2025-10-06T16:11:21Z
has_accepted_license: '1'
intvolume: ' 154'
language:
- iso: eng
oa: '1'
page: 311-331
publication: Journal of Manufacturing Processes
publication_identifier:
unknown:
- 1526-6125
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: Failure behavior prediction for resistance spot-welded three-layered dissimilar
joints with advanced high-strength steel
type: journal_article
user_id: '65085'
volume: 154
year: '2025'
...
---
_id: '61138'
article_number: '434'
author:
- first_name: Yingjie
full_name: Zhan, Yingjie
id: '93591'
last_name: Zhan
- first_name: Ismail
full_name: Caylak, Ismail
id: '75'
last_name: Caylak
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Enrico
full_name: Barth, Enrico
last_name: Barth
- first_name: Eckart
full_name: Uhlmann, Eckart
last_name: Uhlmann
citation:
ama: 'Zhan Y, Caylak I, Ostwald R, Barth E, Uhlmann E. Damage-incorporated four-step
mean-field method for simulating CFRP machining: a novel algorithmic approach.
Multiscale and Multidisciplinary Modeling, Experiments and Design. 2025;8(10).
doi:10.1007/s41939-025-01026-4'
apa: 'Zhan, Y., Caylak, I., Ostwald, R., Barth, E., & Uhlmann, E. (2025). Damage-incorporated
four-step mean-field method for simulating CFRP machining: a novel algorithmic
approach. Multiscale and Multidisciplinary Modeling, Experiments and Design,
8(10), Article 434. https://doi.org/10.1007/s41939-025-01026-4'
bibtex: '@article{Zhan_Caylak_Ostwald_Barth_Uhlmann_2025, title={Damage-incorporated
four-step mean-field method for simulating CFRP machining: a novel algorithmic
approach}, volume={8}, DOI={10.1007/s41939-025-01026-4},
number={10434}, journal={Multiscale and Multidisciplinary Modeling, Experiments
and Design}, publisher={Springer Science and Business Media LLC}, author={Zhan,
Yingjie and Caylak, Ismail and Ostwald, Richard and Barth, Enrico and Uhlmann,
Eckart}, year={2025} }'
chicago: 'Zhan, Yingjie, Ismail Caylak, Richard Ostwald, Enrico Barth, and Eckart
Uhlmann. “Damage-Incorporated Four-Step Mean-Field Method for Simulating CFRP
Machining: A Novel Algorithmic Approach.” Multiscale and Multidisciplinary
Modeling, Experiments and Design 8, no. 10 (2025). https://doi.org/10.1007/s41939-025-01026-4.'
ieee: 'Y. Zhan, I. Caylak, R. Ostwald, E. Barth, and E. Uhlmann, “Damage-incorporated
four-step mean-field method for simulating CFRP machining: a novel algorithmic
approach,” Multiscale and Multidisciplinary Modeling, Experiments and Design,
vol. 8, no. 10, Art. no. 434, 2025, doi: 10.1007/s41939-025-01026-4.'
mla: 'Zhan, Yingjie, et al. “Damage-Incorporated Four-Step Mean-Field Method for
Simulating CFRP Machining: A Novel Algorithmic Approach.” Multiscale and Multidisciplinary
Modeling, Experiments and Design, vol. 8, no. 10, 434, Springer Science and
Business Media LLC, 2025, doi:10.1007/s41939-025-01026-4.'
short: Y. Zhan, I. Caylak, R. Ostwald, E. Barth, E. Uhlmann, Multiscale and Multidisciplinary
Modeling, Experiments and Design 8 (2025).
date_created: 2025-09-05T07:40:31Z
date_updated: 2025-10-20T12:05:57Z
department:
- _id: '9'
- _id: '952'
- _id: '321'
doi: 10.1007/s41939-025-01026-4
intvolume: ' 8'
issue: '10'
language:
- iso: eng
publication: Multiscale and Multidisciplinary Modeling, Experiments and Design
publication_identifier:
issn:
- 2520-8160
- 2520-8179
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: 'Damage-incorporated four-step mean-field method for simulating CFRP machining:
a novel algorithmic approach'
type: journal_article
user_id: '85414'
volume: 8
year: '2025'
...