---
_id: '23780'
author:
- first_name: Catarina G.
full_name: Braz, Catarina G.
last_name: Braz
- first_name: Nicole
full_name: Lutters, Nicole
id: '22006'
last_name: Lutters
- first_name: Jorge
full_name: Rocha, Jorge
last_name: Rocha
- first_name: Ricardo
full_name: Alvim, Ricardo
last_name: Alvim
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Henrique A.
full_name: Matos, Henrique A.
last_name: Matos
citation:
ama: Braz CG, Lutters N, Rocha J, Alvim R, Kenig E, Matos HA. Modeling and Simulation
of an Industrial Formaldehyde Absorption System. Industrial & Engineering
Chemistry Research. 2020;59:5996-6006. doi:10.1021/acs.iecr.9b07013
apa: Braz, C. G., Lutters, N., Rocha, J., Alvim, R., Kenig, E., & Matos, H.
A. (2020). Modeling and Simulation of an Industrial Formaldehyde Absorption System.
Industrial & Engineering Chemistry Research, 59, 5996–6006.
https://doi.org/10.1021/acs.iecr.9b07013
bibtex: '@article{Braz_Lutters_Rocha_Alvim_Kenig_Matos_2020, title={Modeling and
Simulation of an Industrial Formaldehyde Absorption System}, volume={59}, DOI={10.1021/acs.iecr.9b07013},
journal={Industrial & Engineering Chemistry Research}, author={Braz, Catarina
G. and Lutters, Nicole and Rocha, Jorge and Alvim, Ricardo and Kenig, Eugeny and
Matos, Henrique A.}, year={2020}, pages={5996–6006} }'
chicago: 'Braz, Catarina G., Nicole Lutters, Jorge Rocha, Ricardo Alvim, Eugeny
Kenig, and Henrique A. Matos. “Modeling and Simulation of an Industrial Formaldehyde
Absorption System.” Industrial & Engineering Chemistry Research 59
(2020): 5996–6006. https://doi.org/10.1021/acs.iecr.9b07013.'
ieee: 'C. G. Braz, N. Lutters, J. Rocha, R. Alvim, E. Kenig, and H. A. Matos, “Modeling
and Simulation of an Industrial Formaldehyde Absorption System,” Industrial
& Engineering Chemistry Research, vol. 59, pp. 5996–6006, 2020, doi: 10.1021/acs.iecr.9b07013.'
mla: Braz, Catarina G., et al. “Modeling and Simulation of an Industrial Formaldehyde
Absorption System.” Industrial & Engineering Chemistry Research, vol.
59, 2020, pp. 5996–6006, doi:10.1021/acs.iecr.9b07013.
short: C.G. Braz, N. Lutters, J. Rocha, R. Alvim, E. Kenig, H.A. Matos, Industrial
& Engineering Chemistry Research 59 (2020) 5996–6006.
date_created: 2021-09-06T08:50:59Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '9'
- _id: '145'
doi: 10.1021/acs.iecr.9b07013
intvolume: ' 59'
language:
- iso: eng
page: 5996-6006
publication: Industrial & Engineering Chemistry Research
publication_identifier:
issn:
- 0888-5885
- 1520-5045
publication_status: published
status: public
title: Modeling and Simulation of an Industrial Formaldehyde Absorption System
type: journal_article
user_id: '22006'
volume: 59
year: '2020'
...
---
_id: '23781'
author:
- first_name: Mayurkumar P.
full_name: Patil, Mayurkumar P.
last_name: Patil
- first_name: Prakash D.
full_name: Vaidya, Prakash D.
last_name: Vaidya
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Patil MP, Vaidya PD, Kenig E. Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine.
ACS Omega. 2020;5:27043-27049. doi:10.1021/acsomega.0c02076
apa: Patil, M. P., Vaidya, P. D., & Kenig, E. (2020). Kinetics of Carbon Dioxide
Removal Using N-Acetylglucosamine. ACS Omega, 5, 27043–27049. https://doi.org/10.1021/acsomega.0c02076
bibtex: '@article{Patil_Vaidya_Kenig_2020, title={Kinetics of Carbon Dioxide Removal
Using N-Acetylglucosamine}, volume={5}, DOI={10.1021/acsomega.0c02076},
journal={ACS Omega}, author={Patil, Mayurkumar P. and Vaidya, Prakash D. and Kenig,
Eugeny}, year={2020}, pages={27043–27049} }'
chicago: 'Patil, Mayurkumar P., Prakash D. Vaidya, and Eugeny Kenig. “Kinetics of
Carbon Dioxide Removal Using N-Acetylglucosamine.” ACS Omega 5 (2020):
27043–49. https://doi.org/10.1021/acsomega.0c02076.'
ieee: 'M. P. Patil, P. D. Vaidya, and E. Kenig, “Kinetics of Carbon Dioxide Removal
Using N-Acetylglucosamine,” ACS Omega, vol. 5, pp. 27043–27049, 2020, doi:
10.1021/acsomega.0c02076.'
mla: Patil, Mayurkumar P., et al. “Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine.”
ACS Omega, vol. 5, 2020, pp. 27043–49, doi:10.1021/acsomega.0c02076.
short: M.P. Patil, P.D. Vaidya, E. Kenig, ACS Omega 5 (2020) 27043–27049.
date_created: 2021-09-06T09:35:14Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '9'
- _id: '145'
doi: 10.1021/acsomega.0c02076
intvolume: ' 5'
language:
- iso: eng
page: 27043-27049
publication: ACS Omega
publication_identifier:
issn:
- 2470-1343
- 2470-1343
publication_status: published
status: public
title: Kinetics of Carbon Dioxide Removal Using N-Acetylglucosamine
type: journal_article
user_id: '22006'
volume: 5
year: '2020'
...
---
_id: '23782'
author:
- first_name: Alexander
full_name: Kronberg, Alexander
last_name: Kronberg
- first_name: Maxim
full_name: Glushenkov, Maxim
last_name: Glushenkov
- first_name: Torben
full_name: Knoke, Torben
last_name: Knoke
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Kronberg A, Glushenkov M, Knoke T, Kenig E. Theoretical limits on the heat
regeneration degree. International Journal of Heat and Mass Transfer. 2020;161:120282.
doi:10.1016/j.ijheatmasstransfer.2020.120282
apa: Kronberg, A., Glushenkov, M., Knoke, T., & Kenig, E. (2020). Theoretical
limits on the heat regeneration degree. International Journal of Heat and Mass
Transfer, 161, 120282. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120282
bibtex: '@article{Kronberg_Glushenkov_Knoke_Kenig_2020, title={Theoretical limits
on the heat regeneration degree}, volume={161}, DOI={10.1016/j.ijheatmasstransfer.2020.120282},
journal={International Journal of Heat and Mass Transfer}, author={Kronberg, Alexander
and Glushenkov, Maxim and Knoke, Torben and Kenig, Eugeny}, year={2020}, pages={120282}
}'
chicago: 'Kronberg, Alexander, Maxim Glushenkov, Torben Knoke, and Eugeny Kenig.
“Theoretical Limits on the Heat Regeneration Degree.” International Journal
of Heat and Mass Transfer 161 (2020): 120282. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120282.'
ieee: 'A. Kronberg, M. Glushenkov, T. Knoke, and E. Kenig, “Theoretical limits on
the heat regeneration degree,” International Journal of Heat and Mass Transfer,
vol. 161, p. 120282, 2020, doi: 10.1016/j.ijheatmasstransfer.2020.120282.'
mla: Kronberg, Alexander, et al. “Theoretical Limits on the Heat Regeneration Degree.”
International Journal of Heat and Mass Transfer, vol. 161, 2020, p. 120282,
doi:10.1016/j.ijheatmasstransfer.2020.120282.
short: A. Kronberg, M. Glushenkov, T. Knoke, E. Kenig, International Journal of
Heat and Mass Transfer 161 (2020) 120282.
date_created: 2021-09-06T09:45:16Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '9'
- _id: '145'
doi: 10.1016/j.ijheatmasstransfer.2020.120282
intvolume: ' 161'
language:
- iso: eng
page: '120282'
publication: International Journal of Heat and Mass Transfer
publication_identifier:
issn:
- 0017-9310
publication_status: published
status: public
title: Theoretical limits on the heat regeneration degree
type: journal_article
user_id: '22006'
volume: 161
year: '2020'
...
---
_id: '23784'
author:
- first_name: Alexander
full_name: Olenberg, Alexander
id: '11112'
last_name: Olenberg
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Olenberg A, Kenig E. Numerical investigation of liquid flow morphology in structured
packings. Chemical Engineering Science. 2020;219:115559. doi:10.1016/j.ces.2020.115559
apa: Olenberg, A., & Kenig, E. (2020). Numerical investigation of liquid flow
morphology in structured packings. Chemical Engineering Science, 219,
115559. https://doi.org/10.1016/j.ces.2020.115559
bibtex: '@article{Olenberg_Kenig_2020, title={Numerical investigation of liquid
flow morphology in structured packings}, volume={219}, DOI={10.1016/j.ces.2020.115559},
journal={Chemical Engineering Science}, author={Olenberg, Alexander and Kenig,
Eugeny}, year={2020}, pages={115559} }'
chicago: 'Olenberg, Alexander, and Eugeny Kenig. “Numerical Investigation of Liquid
Flow Morphology in Structured Packings.” Chemical Engineering Science 219
(2020): 115559. https://doi.org/10.1016/j.ces.2020.115559.'
ieee: 'A. Olenberg and E. Kenig, “Numerical investigation of liquid flow morphology
in structured packings,” Chemical Engineering Science, vol. 219, p. 115559,
2020, doi: 10.1016/j.ces.2020.115559.'
mla: Olenberg, Alexander, and Eugeny Kenig. “Numerical Investigation of Liquid Flow
Morphology in Structured Packings.” Chemical Engineering Science, vol.
219, 2020, p. 115559, doi:10.1016/j.ces.2020.115559.
short: A. Olenberg, E. Kenig, Chemical Engineering Science 219 (2020) 115559.
date_created: 2021-09-06T09:57:23Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '9'
- _id: '145'
doi: 10.1016/j.ces.2020.115559
intvolume: ' 219'
language:
- iso: eng
page: '115559'
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Chemical Engineering Science
publication_identifier:
issn:
- 0009-2509
publication_status: published
status: public
title: Numerical investigation of liquid flow morphology in structured packings
type: journal_article
user_id: '22006'
volume: 219
year: '2020'
...
---
_id: '23788'
article_number: '120567'
author:
- first_name: A.
full_name: Zibart, A.
last_name: Zibart
- first_name: E.Y.
full_name: Kenig, E.Y.
last_name: Kenig
citation:
ama: Zibart A, Kenig EY. Numerical investigation of conjugate heat transfer in a
pillow-plate heat exchanger. International Journal of Heat and Mass Transfer.
2020. doi:10.1016/j.ijheatmasstransfer.2020.120567
apa: Zibart, A., & Kenig, E. Y. (2020). Numerical investigation of conjugate
heat transfer in a pillow-plate heat exchanger. International Journal of Heat
and Mass Transfer. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120567
bibtex: '@article{Zibart_Kenig_2020, title={Numerical investigation of conjugate
heat transfer in a pillow-plate heat exchanger}, DOI={10.1016/j.ijheatmasstransfer.2020.120567},
number={120567}, journal={International Journal of Heat and Mass Transfer}, author={Zibart,
A. and Kenig, E.Y.}, year={2020} }'
chicago: Zibart, A., and E.Y. Kenig. “Numerical Investigation of Conjugate Heat
Transfer in a Pillow-Plate Heat Exchanger.” International Journal of Heat and
Mass Transfer, 2020. https://doi.org/10.1016/j.ijheatmasstransfer.2020.120567.
ieee: A. Zibart and E. Y. Kenig, “Numerical investigation of conjugate heat transfer
in a pillow-plate heat exchanger,” International Journal of Heat and Mass Transfer,
2020.
mla: Zibart, A., and E. Y. Kenig. “Numerical Investigation of Conjugate Heat Transfer
in a Pillow-Plate Heat Exchanger.” International Journal of Heat and Mass Transfer,
120567, 2020, doi:10.1016/j.ijheatmasstransfer.2020.120567.
short: A. Zibart, E.Y. Kenig, International Journal of Heat and Mass Transfer (2020).
date_created: 2021-09-06T10:30:32Z
date_updated: 2022-01-06T06:55:59Z
department:
- _id: '145'
- _id: '9'
doi: 10.1016/j.ijheatmasstransfer.2020.120567
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: International Journal of Heat and Mass Transfer
publication_identifier:
issn:
- 0017-9310
publication_status: published
status: public
title: Numerical investigation of conjugate heat transfer in a pillow-plate heat exchanger
type: journal_article
user_id: '11029'
year: '2020'
...
---
_id: '23796'
author:
- first_name: Sören Antonius
full_name: Bernemann, Sören Antonius
id: '70108'
last_name: Bernemann
citation:
ama: Bernemann SA. Erstellung eines CFD-Modells für die Entwicklung eines innovativen
Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen.
Paderborn; 2020.
apa: Bernemann, S. A. (2020). Erstellung eines CFD-Modells für die Entwicklung
eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen
Abfällen. Paderborn.
bibtex: '@book{Bernemann_2020, place={Paderborn}, title={Erstellung eines CFD-Modells
für die Entwicklung eines innovativen Trennapparates zur Stickstoffrückgewinnung
aus landwirtschaftlichen Abfällen}, author={Bernemann, Sören Antonius}, year={2020}
}'
chicago: Bernemann, Sören Antonius. Erstellung eines CFD-Modells für die Entwicklung
eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen
Abfällen. Paderborn, 2020.
ieee: S. A. Bernemann, Erstellung eines CFD-Modells für die Entwicklung eines
innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen
Abfällen. Paderborn, 2020.
mla: Bernemann, Sören Antonius. Erstellung eines CFD-Modells für die Entwicklung
eines innovativen Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen
Abfällen. 2020.
short: S.A. Bernemann, Erstellung eines CFD-Modells für die Entwicklung eines innovativen
Trennapparates zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen,
Paderborn, 2020.
date_created: 2021-09-06T12:46:15Z
date_updated: 2022-01-06T06:56:00Z
department:
- _id: '9'
- _id: '145'
keyword:
- CFD
- landwirtschaftliche Abfälle
- Volume-of-Fluid
language:
- iso: ger
place: Paderborn
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
supervisor:
- first_name: René
full_name: Bertling, René
id: '30050'
last_name: Bertling
title: Erstellung eines CFD-Modells für die Entwicklung eines innovativen Trennapparates
zur Stickstoffrückgewinnung aus landwirtschaftlichen Abfällen
type: mastersthesis
user_id: '70108'
year: '2020'
...
---
_id: '23801'
author:
- first_name: Alexander
full_name: Reitz, Alexander
id: '24803'
last_name: Reitz
orcid: 0000-0001-9047-467X
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Reitz A, Grydin O, Schaper M. Phase Transformation Characterization by Means
of High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing
of Sheet Parts. In: The Minerals, Metals & Materials Series. Springer;
2020. doi:10.1007/978-3-030-36628-5_7'
apa: Reitz, A., Grydin, O., & Schaper, M. (2020). Phase Transformation Characterization
by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical
Processing of Sheet Parts. In The Minerals, Metals & Materials Series.
Springer. https://doi.org/10.1007/978-3-030-36628-5_7
bibtex: '@inbook{Reitz_Grydin_Schaper_2020, place={Cham}, title={Phase Transformation
Characterization by Means of High Temperature Digital Image Correlation for Graded
Thermo-Mechanical Processing of Sheet Parts}, DOI={10.1007/978-3-030-36628-5_7},
booktitle={The Minerals, Metals & Materials Series}, publisher={Springer},
author={Reitz, Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020}
}'
chicago: 'Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Phase Transformation
Characterization by Means of High Temperature Digital Image Correlation for Graded
Thermo-Mechanical Processing of Sheet Parts.” In The Minerals, Metals &
Materials Series. Cham: Springer, 2020. https://doi.org/10.1007/978-3-030-36628-5_7.'
ieee: 'A. Reitz, O. Grydin, and M. Schaper, “Phase Transformation Characterization
by Means of High Temperature Digital Image Correlation for Graded Thermo-Mechanical
Processing of Sheet Parts,” in The Minerals, Metals & Materials Series,
Cham: Springer, 2020.'
mla: Reitz, Alexander, et al. “Phase Transformation Characterization by Means of
High Temperature Digital Image Correlation for Graded Thermo-Mechanical Processing
of Sheet Parts.” The Minerals, Metals & Materials Series, Springer,
2020, doi:10.1007/978-3-030-36628-5_7.
short: 'A. Reitz, O. Grydin, M. Schaper, in: The Minerals, Metals & Materials
Series, Springer, Cham, 2020.'
date_created: 2021-09-06T13:24:55Z
date_updated: 2022-01-06T06:56:00Z
department:
- _id: '158'
- _id: '321'
doi: 10.1007/978-3-030-36628-5_7
language:
- iso: eng
main_file_link:
- url: https://link.springer.com/chapter/10.1007/978-3-030-36628-5_7
place: Cham
publication: The Minerals, Metals & Materials Series
publication_identifier:
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: Phase Transformation Characterization by Means of High Temperature Digital
Image Correlation for Graded Thermo-Mechanical Processing of Sheet Parts
type: book_chapter
user_id: '24803'
year: '2020'
...
---
_id: '23861'
author:
- first_name: Matthias
full_name: Altepeter, Matthias
id: '33420'
last_name: Altepeter
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Altepeter M, Schöppner V. Materialabbau im Doppelschneckenextruder. Kunststoffe.
Published online 2020.
apa: Altepeter, M., & Schöppner, V. (2020). Materialabbau im Doppelschneckenextruder.
Kunststoffe.
bibtex: '@article{Altepeter_Schöppner_2020, title={Materialabbau im Doppelschneckenextruder},
journal={Kunststoffe}, publisher={Carl Hanser Verlag}, author={Altepeter, Matthias
and Schöppner, Volker}, year={2020} }'
chicago: Altepeter, Matthias, and Volker Schöppner. “Materialabbau Im Doppelschneckenextruder.”
Kunststoffe, 2020.
ieee: M. Altepeter and V. Schöppner, “Materialabbau im Doppelschneckenextruder,”
Kunststoffe, 2020.
mla: Altepeter, Matthias, and Volker Schöppner. “Materialabbau Im Doppelschneckenextruder.”
Kunststoffe, Carl Hanser Verlag, 2020.
short: M. Altepeter, V. Schöppner, Kunststoffe (2020).
date_created: 2021-09-07T10:45:44Z
date_updated: 2022-01-06T06:56:02Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: Kunststoffe
publisher: Carl Hanser Verlag
status: public
title: Materialabbau im Doppelschneckenextruder
type: journal_article
user_id: '33420'
year: '2020'
...
---
_id: '23865'
abstract:
- lang: eng
text: "Regarding the design of single screw extruders, the prediction of the throughput
needs to be of high accuracy. The calculation of the solids conveying throughput
is particularly important for extruders with a grooved feed section. In contrast
to smooth barrel extruders the throughput of the entire plant is determined at
the feed section. Various simplifications are necessary for an analytical modelling
of the solids conveying, e.g. the classification into conveying cases, the assumption
of solid block flow and the assumption of pressure anisotropy coefficients. In
numerical simulations with the Discrete Element Method (DEM), which has recently
been successfully used to describe solids conveying in smooth barrel extruders,
the simplifications mentioned above are not taken into account. Here, the pellets
are approximated as spherical particles or particles composed of spheres. Based
on virtual overlaps, contact models and the solution of Newton's equations of
motion, a more complex consideration of the pellet flow is possible. In each iteration
step of the simulation, the particle velocities, contact forces and derived quantities,
e.g. the mass throughput in the screw channel and the grooves or the radial pressure
build-up along the grooved barrel can be evaluated. Therefore, a DEM simulation
model can be investigated by means of statistical design of experiments in order
to convert the target values into a metamodel by regression. Long computation
times of numerical simulations will be avoided in this matter as well as too simple
assumptions of analytical approaches. The influencing parameters to be simulated
are divided into material, geometry and process parameters. Relevant material
parameters are the coefficients of friction of the polymer-polymer and polymer-steel
surface as well as the restitution coefficient and the particle diameter. The
geometry is varied in the form of the screw diameter, the channel depth and pitch,
the number of grooves and their width, depth and angle. By varying the angle,
both conventional axial grooves and helical grooves are taken into account. Finally,
the process parameters speed and backpressure are also considered in the simulations.
In order to reduce the simulation effort, irrelevant parameters are identified
in preliminary investigations.\r\n"
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: 'Schöppner V, Brüning F. Development of a Solids Conveying Throughput Model
for Grooved Barrel Extruders based on Discrete Element Simulations. In: Hopmann
C, Dahlmann R, eds. Advances in Polymer Processing 2020: Proceedings of the
International Symposium on Plastics Technology. Springer; 2020.'
apa: 'Schöppner, V., & Brüning, F. (2020). Development of a Solids Conveying
Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations.
In C. Hopmann & R. Dahlmann (Eds.), Advances in Polymer Processing 2020:
Proceedings of the International Symposium on Plastics Technology. Springer.'
bibtex: '@inproceedings{Schöppner_Brüning_2020, title={Development of a Solids Conveying
Throughput Model for Grooved Barrel Extruders based on Discrete Element Simulations},
booktitle={Advances in Polymer Processing 2020: Proceedings of the International
Symposium on Plastics Technology}, publisher={Springer}, author={Schöppner, Volker
and Brüning, Florian}, editor={Hopmann, Christian and Dahlmann, Rainer}, year={2020}
}'
chicago: 'Schöppner, Volker, and Florian Brüning. “Development of a Solids Conveying
Throughput Model for Grooved Barrel Extruders Based on Discrete Element Simulations.”
In Advances in Polymer Processing 2020: Proceedings of the International Symposium
on Plastics Technology, edited by Christian Hopmann and Rainer Dahlmann. Springer,
2020.'
ieee: 'V. Schöppner and F. Brüning, “Development of a Solids Conveying Throughput
Model for Grooved Barrel Extruders based on Discrete Element Simulations,” in
Advances in Polymer Processing 2020: Proceedings of the International Symposium
on Plastics Technology, 2020.'
mla: 'Schöppner, Volker, and Florian Brüning. “Development of a Solids Conveying
Throughput Model for Grooved Barrel Extruders Based on Discrete Element Simulations.”
Advances in Polymer Processing 2020: Proceedings of the International Symposium
on Plastics Technology, edited by Christian Hopmann and Rainer Dahlmann, Springer,
2020.'
short: 'V. Schöppner, F. Brüning, in: C. Hopmann, R. Dahlmann (Eds.), Advances in
Polymer Processing 2020: Proceedings of the International Symposium on Plastics
Technology, Springer, 2020.'
date_created: 2021-09-07T11:21:23Z
date_updated: 2022-01-06T06:56:02Z
department:
- _id: '9'
- _id: '367'
editor:
- first_name: Christian
full_name: Hopmann, Christian
last_name: Hopmann
- first_name: Rainer
full_name: Dahlmann, Rainer
last_name: Dahlmann
language:
- iso: eng
publication: 'Advances in Polymer Processing 2020: Proceedings of the International
Symposium on Plastics Technology'
publication_identifier:
unknown:
- '9783662608081'
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: Development of a Solids Conveying Throughput Model for Grooved Barrel Extruders
based on Discrete Element Simulations
type: conference
user_id: '72920'
year: '2020'
...
---
_id: '23868'
author:
- first_name: Mirko
full_name: Albrecht, Mirko
last_name: Albrecht
- first_name: Max
full_name: Bialaschik, Max
id: '32297'
last_name: Bialaschik
- first_name: Michael
full_name: Gehde, Michael
last_name: Gehde
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Albrecht M, Bialaschik M, Gehde M, Schöppner V. Einfluss der Materialschädigung
auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden. DVS
CONGRESS 2020 - Große Schweißtechnische Tagung. 2020;365.
apa: Albrecht, M., Bialaschik, M., Gehde, M., & Schöppner, V. (2020). Einfluss
der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen
von Polyamiden. DVS CONGRESS 2020 - Große Schweißtechnische Tagung, 365.
bibtex: '@article{Albrecht_Bialaschik_Gehde_Schöppner_2020, title={Einfluss der
Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen von
Polyamiden}, volume={365}, journal={DVS CONGRESS 2020 - Große Schweißtechnische
Tagung}, publisher={DVS Media GmbH}, author={Albrecht, Mirko and Bialaschik, Max
and Gehde, Michael and Schöppner, Volker}, year={2020} }'
chicago: Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Einfluss
der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen
von Polyamiden.” DVS CONGRESS 2020 - Große Schweißtechnische Tagung 365
(2020).
ieee: M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Einfluss der Materialschädigung
auf die Schweißnahtqualität beim Warmgasstumpfschweißen von Polyamiden,” DVS
CONGRESS 2020 - Große Schweißtechnische Tagung, vol. 365, 2020.
mla: Albrecht, Mirko, et al. “Einfluss der Materialschädigung auf die Schweißnahtqualität
beim Warmgasstumpfschweißen von Polyamiden.” DVS CONGRESS 2020 - Große Schweißtechnische
Tagung, vol. 365, DVS Media GmbH, 2020.
short: M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, DVS CONGRESS 2020 - Große
Schweißtechnische Tagung 365 (2020).
date_created: 2021-09-07T11:41:52Z
date_updated: 2022-01-06T06:56:02Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
intvolume: ' 365'
language:
- iso: ger
publication: DVS CONGRESS 2020 - Große Schweißtechnische Tagung
publication_identifier:
isbn:
- '978-3-96144-098-6 '
publisher: DVS Media GmbH
status: public
title: Einfluss der Materialschädigung auf die Schweißnahtqualität beim Warmgasstumpfschweißen
von Polyamiden
type: journal_article
user_id: '32297'
volume: 365
year: '2020'
...
---
_id: '23873'
author:
- first_name: Mirko
full_name: Albrecht, Mirko
last_name: Albrecht
- first_name: Max
full_name: Bialaschik, Max
id: '32297'
last_name: Bialaschik
- first_name: Michael
full_name: Gehde, Michael
last_name: Gehde
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Albrecht M, Bialaschik M, Gehde M, Schöppner V. Hot gas welding – Influences
of the tool design. In: ; 2020. doi:10.1063/5.0029478'
apa: Albrecht, M., Bialaschik, M., Gehde, M., & Schöppner, V. (2020). Hot
gas welding – Influences of the tool design. PPS2019 Europe-Africa Regional
Conference of the Polymer Processing Society, Pretoria. https://doi.org/10.1063/5.0029478
bibtex: '@inproceedings{Albrecht_Bialaschik_Gehde_Schöppner_2020, title={Hot gas
welding – Influences of the tool design}, DOI={10.1063/5.0029478},
author={Albrecht, Mirko and Bialaschik, Max and Gehde, Michael and Schöppner,
Volker}, year={2020} }'
chicago: Albrecht, Mirko, Max Bialaschik, Michael Gehde, and Volker Schöppner. “Hot
Gas Welding – Influences of the Tool Design,” 2020. https://doi.org/10.1063/5.0029478.
ieee: 'M. Albrecht, M. Bialaschik, M. Gehde, and V. Schöppner, “Hot gas welding
– Influences of the tool design,” presented at the PPS2019 Europe-Africa Regional
Conference of the Polymer Processing Society, Pretoria, 2020, doi: 10.1063/5.0029478.'
mla: Albrecht, Mirko, et al. Hot Gas Welding – Influences of the Tool Design.
2020, doi:10.1063/5.0029478.
short: 'M. Albrecht, M. Bialaschik, M. Gehde, V. Schöppner, in: 2020.'
conference:
location: Pretoria
name: PPS2019 Europe-Africa Regional Conference of the Polymer Processing Society
date_created: 2021-09-07T11:48:32Z
date_updated: 2022-01-06T06:56:02Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
doi: 10.1063/5.0029478
language:
- iso: eng
publication_status: published
status: public
title: Hot gas welding – Influences of the tool design
type: conference
user_id: '32297'
year: '2020'
...
---
_id: '24005'
article_number: '100032'
author:
- first_name: Jan-Peter
full_name: Brüggemann, Jan-Peter
last_name: Brüggemann
- first_name: Lena
full_name: Risse, Lena
id: '27356'
last_name: Risse
- first_name: Steven Clifford
full_name: Woodcock, Steven Clifford
id: '60486'
last_name: Woodcock
- first_name: Tintu David
full_name: Joy, Tintu David
id: '30821'
last_name: Joy
- first_name: Johannes
full_name: Neumann, Johannes
last_name: Neumann
- first_name: Jakub
full_name: Vidner, Jakub
last_name: Vidner
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
- first_name: Hans Albert
full_name: Richard, Hans Albert
last_name: Richard
citation:
ama: Brüggemann J-P, Risse L, Woodcock SC, et al. Structural optimization of a wheel
force transducer component for more realistic acquisition of vehicle load data
and fracture mechanical evaluation. Applications in Engineering Science.
Published online 2020. doi:10.1016/j.apples.2020.100032
apa: Brüggemann, J.-P., Risse, L., Woodcock, S. C., Joy, T. D., Neumann, J., Vidner,
J., Kullmer, G., & Richard, H. A. (2020). Structural optimization of a wheel
force transducer component for more realistic acquisition of vehicle load data
and fracture mechanical evaluation. Applications in Engineering Science,
Article 100032. https://doi.org/10.1016/j.apples.2020.100032
bibtex: '@article{Brüggemann_Risse_Woodcock_Joy_Neumann_Vidner_Kullmer_Richard_2020,
title={Structural optimization of a wheel force transducer component for more
realistic acquisition of vehicle load data and fracture mechanical evaluation},
DOI={10.1016/j.apples.2020.100032},
number={100032}, journal={Applications in Engineering Science}, author={Brüggemann,
Jan-Peter and Risse, Lena and Woodcock, Steven Clifford and Joy, Tintu David and
Neumann, Johannes and Vidner, Jakub and Kullmer, Gunter and Richard, Hans Albert},
year={2020} }'
chicago: Brüggemann, Jan-Peter, Lena Risse, Steven Clifford Woodcock, Tintu David
Joy, Johannes Neumann, Jakub Vidner, Gunter Kullmer, and Hans Albert Richard.
“Structural Optimization of a Wheel Force Transducer Component for More Realistic
Acquisition of Vehicle Load Data and Fracture Mechanical Evaluation.” Applications
in Engineering Science, 2020. https://doi.org/10.1016/j.apples.2020.100032.
ieee: 'J.-P. Brüggemann et al., “Structural optimization of a wheel force
transducer component for more realistic acquisition of vehicle load data and fracture
mechanical evaluation,” Applications in Engineering Science, Art. no. 100032,
2020, doi: 10.1016/j.apples.2020.100032.'
mla: Brüggemann, Jan-Peter, et al. “Structural Optimization of a Wheel Force Transducer
Component for More Realistic Acquisition of Vehicle Load Data and Fracture Mechanical
Evaluation.” Applications in Engineering Science, 100032, 2020, doi:10.1016/j.apples.2020.100032.
short: J.-P. Brüggemann, L. Risse, S.C. Woodcock, T.D. Joy, J. Neumann, J. Vidner,
G. Kullmer, H.A. Richard, Applications in Engineering Science (2020).
date_created: 2021-09-09T09:32:21Z
date_updated: 2022-01-06T06:56:05Z
department:
- _id: '143'
doi: 10.1016/j.apples.2020.100032
language:
- iso: eng
publication: Applications in Engineering Science
publication_identifier:
issn:
- 2666-4968
publication_status: published
status: public
title: Structural optimization of a wheel force transducer component for more realistic
acquisition of vehicle load data and fracture mechanical evaluation
type: journal_article
user_id: '45673'
year: '2020'
...
---
_id: '24011'
author:
- first_name: Tintu David
full_name: Joy, Tintu David
id: '30821'
last_name: Joy
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
- first_name: Lena
full_name: Risse, Lena
id: '27356'
last_name: Risse
citation:
ama: 'Joy TD, Kullmer G, Risse L. Vorhersage der Rissinitiierung in 3D-Strukturen
mit ADAPCRACK3D. In: Vol DVM-Bericht 252. ; 2020:207-216.'
apa: Joy, T. D., Kullmer, G., & Risse, L. (2020). Vorhersage der Rissinitiierung
in 3D-Strukturen mit ADAPCRACK3D. DVM-Bericht 252, 207–216.
bibtex: '@inproceedings{Joy_Kullmer_Risse_2020, title={Vorhersage der Rissinitiierung
in 3D-Strukturen mit ADAPCRACK3D}, volume={DVM-Bericht 252}, author={Joy, Tintu
David and Kullmer, Gunter and Risse, Lena}, year={2020}, pages={207–216} }'
chicago: Joy, Tintu David, Gunter Kullmer, and Lena Risse. “Vorhersage der Rissinitiierung
in 3D-Strukturen mit ADAPCRACK3D,” DVM-Bericht 252:207–16, 2020.
ieee: T. D. Joy, G. Kullmer, and L. Risse, “Vorhersage der Rissinitiierung in 3D-Strukturen
mit ADAPCRACK3D,” Hamburg, 2020, vol. DVM-Bericht 252, pp. 207–216.
mla: Joy, Tintu David, et al. Vorhersage der Rissinitiierung in 3D-Strukturen
mit ADAPCRACK3D. 2020, pp. 207–16.
short: 'T.D. Joy, G. Kullmer, L. Risse, in: 2020, pp. 207–216.'
conference:
end_date: 2020-02-20
location: Hamburg
name: 'Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse,
Prüfmethoden und Anwendungen'
start_date: 2020-02-19
date_created: 2021-09-09T10:11:40Z
date_updated: 2022-01-06T06:56:05Z
department:
- _id: '143'
language:
- iso: ger
page: 207-216
status: public
title: Vorhersage der Rissinitiierung in 3D-Strukturen mit ADAPCRACK3D
type: conference
user_id: '45673'
volume: DVM-Bericht 252
year: '2020'
...
---
_id: '24012'
author:
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Benjamin
full_name: Bauer, Benjamin
last_name: Bauer
- first_name: Hans Albert
full_name: Richard, Hans Albert
last_name: Richard
citation:
ama: 'Kullmer G, Weiß D, Bauer B, Richard HA. Entwicklung einer Axialrissprobe zur
Ermittlung von bruchmechanischen Kennwerten für Rohre. In: Vol DVM-Bericht 252.
; 2020:61-70.'
apa: Kullmer, G., Weiß, D., Bauer, B., & Richard, H. A. (2020). Entwicklung
einer Axialrissprobe zur Ermittlung von bruchmechanischen Kennwerten für Rohre.
DVM-Bericht 252, 61–70.
bibtex: '@inproceedings{Kullmer_Weiß_Bauer_Richard_2020, title={Entwicklung einer
Axialrissprobe zur Ermittlung von bruchmechanischen Kennwerten für Rohre}, volume={DVM-Bericht
252}, author={Kullmer, Gunter and Weiß, Deborah and Bauer, Benjamin and Richard,
Hans Albert}, year={2020}, pages={61–70} }'
chicago: Kullmer, Gunter, Deborah Weiß, Benjamin Bauer, and Hans Albert Richard.
“Entwicklung Einer Axialrissprobe Zur Ermittlung von Bruchmechanischen Kennwerten
Für Rohre,” DVM-Bericht 252:61–70, 2020.
ieee: G. Kullmer, D. Weiß, B. Bauer, and H. A. Richard, “Entwicklung einer Axialrissprobe
zur Ermittlung von bruchmechanischen Kennwerten für Rohre,” Hamburg, 2020, vol.
DVM-Bericht 252, pp. 61–70.
mla: Kullmer, Gunter, et al. Entwicklung Einer Axialrissprobe Zur Ermittlung
von Bruchmechanischen Kennwerten Für Rohre. 2020, pp. 61–70.
short: 'G. Kullmer, D. Weiß, B. Bauer, H.A. Richard, in: 2020, pp. 61–70.'
conference:
end_date: 2020-02-20
location: Hamburg
name: 'Arbeitskreis: Bruchmechanische Werkstoff- und Bauteilbewertung: Beanspruchungsanalyse,
Prüfmethoden und Anwendungen'
start_date: 2020-02-19
date_created: 2021-09-09T10:23:00Z
date_updated: 2022-01-06T06:56:05Z
department:
- _id: '143'
language:
- iso: eng
page: 61-70
status: public
title: Entwicklung einer Axialrissprobe zur Ermittlung von bruchmechanischen Kennwerten
für Rohre
type: conference
user_id: '45673'
volume: DVM-Bericht 252
year: '2020'
...
---
_id: '24014'
author:
- first_name: Lena
full_name: Risse, Lena
id: '27356'
last_name: Risse
citation:
ama: Risse L. Präoperative Studien zur Gestaltung von patientenspezifischen,
medizinischen Hilfsmitteln. Vol Band 21. Shaker Verlag; 2020.
apa: 'Risse, L. (2020). Präoperative Studien zur Gestaltung von patientenspezifischen,
medizinischen Hilfsmitteln: Vol. Band 21. Shaker Verlag.'
bibtex: '@book{Risse_2020, place={Aachen}, series={Forschungsberichte des Direct
Manufacturing Research Centers}, title={Präoperative Studien zur Gestaltung von
patientenspezifischen, medizinischen Hilfsmitteln}, volume={Band 21}, publisher={Shaker
Verlag}, author={Risse, Lena}, year={2020}, collection={Forschungsberichte des
Direct Manufacturing Research Centers} }'
chicago: 'Risse, Lena. Präoperative Studien zur Gestaltung von patientenspezifischen,
medizinischen Hilfsmitteln. Vol. Band 21. Forschungsberichte des Direct Manufacturing
Research Centers. Aachen: Shaker Verlag, 2020.'
ieee: 'L. Risse, Präoperative Studien zur Gestaltung von patientenspezifischen,
medizinischen Hilfsmitteln, vol. Band 21. Aachen: Shaker Verlag, 2020.'
mla: Risse, Lena. Präoperative Studien zur Gestaltung von patientenspezifischen,
medizinischen Hilfsmitteln. Shaker Verlag, 2020.
short: L. Risse, Präoperative Studien zur Gestaltung von patientenspezifischen,
medizinischen Hilfsmitteln, Shaker Verlag, Aachen, 2020.
date_created: 2021-09-09T10:28:05Z
date_updated: 2022-01-06T06:56:05Z
department:
- _id: '143'
language:
- iso: ger
place: Aachen
publisher: Shaker Verlag
series_title: Forschungsberichte des Direct Manufacturing Research Centers
status: public
title: Präoperative Studien zur Gestaltung von patientenspezifischen, medizinischen
Hilfsmitteln
type: dissertation
user_id: '45673'
volume: Band 21
year: '2020'
...
---
_id: '24016'
author:
- first_name: Dirk Theodor
full_name: Schraeder, Dirk Theodor
last_name: Schraeder
- first_name: Bärbel
full_name: Geisen, Bärbel
last_name: Geisen
- first_name: Dirk
full_name: Baumann, Dirk
last_name: Baumann
- first_name: Mamoun
full_name: Afaneh, Mamoun
last_name: Afaneh
- first_name: Tommy
full_name: Schafran, Tommy
id: '72888'
last_name: Schafran
citation:
ama: Schraeder DT, Geisen B, Baumann D, Afaneh M, Schafran T. Plastisch- chirurgische
Verfahren modifiziert nach Lexer zur Versorgung des Diabetischen Fußsyndroms in
der Technischen Orthopädie – ein Standard im Hospital Geseke. Orthopädie Technik.
2020;71 (8):52-57.
apa: Schraeder, D. T., Geisen, B., Baumann, D., Afaneh, M., & Schafran, T. (2020).
Plastisch- chirurgische Verfahren modifiziert nach Lexer zur Versorgung des Diabetischen
Fußsyndroms in der Technischen Orthopädie – ein Standard im Hospital Geseke. Orthopädie
Technik, 71 (8), 52–57.
bibtex: '@article{Schraeder_Geisen_Baumann_Afaneh_Schafran_2020, title={Plastisch-
chirurgische Verfahren modifiziert nach Lexer zur Versorgung des Diabetischen
Fußsyndroms in der Technischen Orthopädie – ein Standard im Hospital Geseke},
volume={71 (8)}, journal={Orthopädie Technik}, author={Schraeder, Dirk Theodor
and Geisen, Bärbel and Baumann, Dirk and Afaneh, Mamoun and Schafran, Tommy},
year={2020}, pages={52–57} }'
chicago: 'Schraeder, Dirk Theodor, Bärbel Geisen, Dirk Baumann, Mamoun Afaneh, and
Tommy Schafran. “Plastisch- chirurgische Verfahren modifiziert nach Lexer zur
Versorgung des Diabetischen Fußsyndroms in der Technischen Orthopädie – ein Standard
im Hospital Geseke.” Orthopädie Technik 71 (8) (2020): 52–57.'
ieee: D. T. Schraeder, B. Geisen, D. Baumann, M. Afaneh, and T. Schafran, “Plastisch-
chirurgische Verfahren modifiziert nach Lexer zur Versorgung des Diabetischen
Fußsyndroms in der Technischen Orthopädie – ein Standard im Hospital Geseke,”
Orthopädie Technik, vol. 71 (8), pp. 52–57, 2020.
mla: Schraeder, Dirk Theodor, et al. “Plastisch- chirurgische Verfahren modifiziert
nach Lexer zur Versorgung des Diabetischen Fußsyndroms in der Technischen Orthopädie
– ein Standard im Hospital Geseke.” Orthopädie Technik, vol. 71 (8), 2020,
pp. 52–57.
short: D.T. Schraeder, B. Geisen, D. Baumann, M. Afaneh, T. Schafran, Orthopädie
Technik 71 (8) (2020) 52–57.
date_created: 2021-09-09T11:41:07Z
date_updated: 2022-01-06T06:56:05Z
department:
- _id: '143'
language:
- iso: ger
page: 52-57
publication: Orthopädie Technik
status: public
title: Plastisch- chirurgische Verfahren modifiziert nach Lexer zur Versorgung des
Diabetischen Fußsyndroms in der Technischen Orthopädie – ein Standard im Hospital
Geseke
type: journal_article
user_id: '45673'
volume: 71 (8)
year: '2020'
...
---
_id: '20301'
author:
- first_name: Heinrich
full_name: Günter, Heinrich
id: '66472'
last_name: Günter
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Günter H, Meschut G. Joining of high-strength steel grades in lightweight
structures using single-stage resistance element welding on conventional resistance
spot welding machines. In: 73rd IIW Annual Assembly and International Conference.
; 2020.'
apa: Günter, H., & Meschut, G. (2020). Joining of high-strength steel grades
in lightweight structures using single-stage resistance element welding on conventional
resistance spot welding machines. In 73rd IIW Annual Assembly and International
Conference.
bibtex: '@inproceedings{Günter_Meschut_2020, title={Joining of high-strength steel
grades in lightweight structures using single-stage resistance element welding
on conventional resistance spot welding machines}, booktitle={73rd IIW Annual
Assembly and International Conference}, author={Günter, Heinrich and Meschut,
Gerson}, year={2020} }'
chicago: Günter, Heinrich, and Gerson Meschut. “Joining of High-Strength Steel Grades
in Lightweight Structures Using Single-Stage Resistance Element Welding on Conventional
Resistance Spot Welding Machines.” In 73rd IIW Annual Assembly and International
Conference, 2020.
ieee: H. Günter and G. Meschut, “Joining of high-strength steel grades in lightweight
structures using single-stage resistance element welding on conventional resistance
spot welding machines,” in 73rd IIW Annual Assembly and International Conference,
2020.
mla: Günter, Heinrich, and Gerson Meschut. “Joining of High-Strength Steel Grades
in Lightweight Structures Using Single-Stage Resistance Element Welding on Conventional
Resistance Spot Welding Machines.” 73rd IIW Annual Assembly and International
Conference, 2020.
short: 'H. Günter, G. Meschut, in: 73rd IIW Annual Assembly and International Conference,
2020.'
date_created: 2020-11-05T11:56:00Z
date_updated: 2022-01-06T06:54:25Z
department:
- _id: '157'
language:
- iso: eng
publication: 73rd IIW Annual Assembly and International Conference
publication_status: published
status: public
title: Joining of high-strength steel grades in lightweight structures using single-stage
resistance element welding on conventional resistance spot welding machines
type: conference
user_id: '66472'
year: '2020'
...
---
_id: '20316'
author:
- first_name: Christopher
full_name: Krüger, Christopher
last_name: Krüger
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: David
full_name: Merdivan, David
last_name: Merdivan
- first_name: Sebastian
full_name: Spohr, Sebastian
last_name: Spohr
- first_name: Peter
full_name: Urban, Peter
last_name: Urban
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Krüger C, Schmolke T, Merdivan D, Spohr S, Urban P, Meschut G. Concept Development
for a Functional Integrated Lightweight Battery Housing with Special Consideration
of the Joining Technology. In: ; 2020.'
apa: Krüger, C., Schmolke, T., Merdivan, D., Spohr, S., Urban, P., & Meschut,
G. (2020). Concept Development for a Functional Integrated Lightweight Battery
Housing with Special Consideration of the Joining Technology. Presented at the
Aachen Body Engineering Days 2020, Aachen.
bibtex: '@inproceedings{Krüger_Schmolke_Merdivan_Spohr_Urban_Meschut_2020, title={Concept
Development for a Functional Integrated Lightweight Battery Housing with Special
Consideration of the Joining Technology}, author={Krüger, Christopher and Schmolke,
Tobias and Merdivan, David and Spohr, Sebastian and Urban, Peter and Meschut,
Gerson}, year={2020} }'
chicago: Krüger, Christopher, Tobias Schmolke, David Merdivan, Sebastian Spohr,
Peter Urban, and Gerson Meschut. “Concept Development for a Functional Integrated
Lightweight Battery Housing with Special Consideration of the Joining Technology,”
2020.
ieee: C. Krüger, T. Schmolke, D. Merdivan, S. Spohr, P. Urban, and G. Meschut, “Concept
Development for a Functional Integrated Lightweight Battery Housing with Special
Consideration of the Joining Technology,” presented at the Aachen Body Engineering
Days 2020, Aachen, 2020.
mla: Krüger, Christopher, et al. Concept Development for a Functional Integrated
Lightweight Battery Housing with Special Consideration of the Joining Technology.
2020.
short: 'C. Krüger, T. Schmolke, D. Merdivan, S. Spohr, P. Urban, G. Meschut, in:
2020.'
conference:
end_date: 2020-09-16
location: Aachen
name: Aachen Body Engineering Days 2020
start_date: 2020-09-15
date_created: 2020-11-10T09:59:26Z
date_updated: 2022-01-06T06:54:26Z
department:
- _id: '157'
language:
- iso: eng
status: public
title: Concept Development for a Functional Integrated Lightweight Battery Housing
with Special Consideration of the Joining Technology
type: conference
user_id: '44759'
year: '2020'
...
---
_id: '20318'
author:
- first_name: Johannes
full_name: Göddecke, Johannes
id: '59070'
last_name: Göddecke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Holger
full_name: Lieberwirth, Holger
last_name: Lieberwirth
- first_name: Erman
full_name: Tekkaya, Erman
last_name: Tekkaya
- first_name: Michael
full_name: Zaeh, Michael
last_name: Zaeh
- first_name: Michael
full_name: Stegelmann, Michael
last_name: Stegelmann
- first_name: Michael
full_name: Müller, Michael
last_name: Müller
- first_name: Kurt
full_name: Böhme, Kurt
last_name: Böhme
- first_name: Thomas
full_name: Krampitz, Thomas
last_name: Krampitz
- first_name: Mareen
full_name: Zöllner, Mareen
last_name: Zöllner
- first_name: Marlon
full_name: Hahn, Marlon
last_name: Hahn
- first_name: Fabian
full_name: Schmitz, Fabian
last_name: Schmitz
- first_name: Andreas
full_name: Hofer, Andreas
last_name: Hofer
- first_name: Sandra
full_name: Grohmann, Sandra
last_name: Grohmann
citation:
ama: 'Göddecke J, Meschut G, Gude M, et al. FOREL-Wegweiser: Handlungsempfehlungen
für den ressourceneffizienten Leichtbau . Plattform FOREL; 2020.'
apa: 'Göddecke, J., Meschut, G., Gude, M., Lieberwirth, H., Tekkaya, E., Zaeh, M.,
… Grohmann, S. (2020). FOREL-Wegweiser: Handlungsempfehlungen für den ressourceneffizienten
Leichtbau . Plattform FOREL.'
bibtex: '@book{Göddecke_Meschut_Gude_Lieberwirth_Tekkaya_Zaeh_Stegelmann_Müller_Böhme_Krampitz_et
al._2020, title={FOREL-Wegweiser: Handlungsempfehlungen für den ressourceneffizienten
Leichtbau }, publisher={Plattform FOREL}, author={Göddecke, Johannes and Meschut,
Gerson and Gude, Maik and Lieberwirth, Holger and Tekkaya, Erman and Zaeh, Michael
and Stegelmann, Michael and Müller, Michael and Böhme, Kurt and Krampitz, Thomas
and et al.}, year={2020} }'
chicago: 'Göddecke, Johannes, Gerson Meschut, Maik Gude, Holger Lieberwirth, Erman
Tekkaya, Michael Zaeh, Michael Stegelmann, et al. FOREL-Wegweiser: Handlungsempfehlungen
für den ressourceneffizienten Leichtbau . Plattform FOREL, 2020.'
ieee: 'J. Göddecke et al., FOREL-Wegweiser: Handlungsempfehlungen für
den ressourceneffizienten Leichtbau . Plattform FOREL, 2020.'
mla: 'Göddecke, Johannes, et al. FOREL-Wegweiser: Handlungsempfehlungen für den
ressourceneffizienten Leichtbau . Plattform FOREL, 2020.'
short: 'J. Göddecke, G. Meschut, M. Gude, H. Lieberwirth, E. Tekkaya, M. Zaeh, M.
Stegelmann, M. Müller, K. Böhme, T. Krampitz, M. Zöllner, M. Hahn, F. Schmitz,
A. Hofer, S. Grohmann, FOREL-Wegweiser: Handlungsempfehlungen für den ressourceneffizienten
Leichtbau , Plattform FOREL, 2020.'
date_created: 2020-11-10T12:34:47Z
date_updated: 2022-01-06T06:54:26Z
department:
- _id: '157'
language:
- iso: ger
page: '82'
publication_identifier:
isbn:
- 978-3867806435
publisher: Plattform FOREL
status: public
title: 'FOREL-Wegweiser: Handlungsempfehlungen für den ressourceneffizienten Leichtbau '
type: book
user_id: '59070'
year: '2020'
...
---
_id: '20321'
author:
- first_name: Johannes
full_name: Göddecke, Johannes
id: '59070'
last_name: Göddecke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Thomas
full_name: Ummenhofer, Thomas
last_name: Ummenhofer
- first_name: Matthias
full_name: Albiez, Matthias
last_name: Albiez
- first_name: Jannis
full_name: Damm, Jannis
last_name: Damm
- first_name: Anton
full_name: Matzenmiller, Anton
last_name: Matzenmiller
- first_name: Fabian
full_name: Kötz, Fabian
last_name: Kötz
citation:
ama: 'Göddecke J, Meschut G, Teutenberg D, et al. Experimentelle und numerische
Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer
Beanspruchung. In: DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie
e.V. , ed. 20. Kolloquium Gemeinsame Forschung in Der Klebtechnik. 20.
Kolloquium Gemeinsame Forschung in der Klebtechnik. ; 2020.'
apa: Göddecke, J., Meschut, G., Teutenberg, D., Ummenhofer, T., Albiez, M., Damm,
J., … Kötz, F. (2020). Experimentelle und numerische Untersuchung der Dämpfungseigenschaften
geklebter Strukturen unter dynamischer Beanspruchung. In DECHEMA, Gesellschaft
für Chemische Technik und Biotechnologie e.V. (Ed.), 20. Kolloquium Gemeinsame
Forschung in der Klebtechnik.
bibtex: '@inproceedings{Göddecke_Meschut_Teutenberg_Ummenhofer_Albiez_Damm_Matzenmiller_Kötz_2020,
series={20. Kolloquium Gemeinsame Forschung in der Klebtechnik}, title={Experimentelle
und numerische Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter
dynamischer Beanspruchung}, booktitle={20. Kolloquium Gemeinsame Forschung in
der Klebtechnik}, author={Göddecke, Johannes and Meschut, Gerson and Teutenberg,
Dominik and Ummenhofer, Thomas and Albiez, Matthias and Damm, Jannis and Matzenmiller,
Anton and Kötz, Fabian}, editor={DECHEMA, Gesellschaft für Chemische Technik und
Biotechnologie e.V. Editor}, year={2020}, collection={20. Kolloquium Gemeinsame
Forschung in der Klebtechnik} }'
chicago: Göddecke, Johannes, Gerson Meschut, Dominik Teutenberg, Thomas Ummenhofer,
Matthias Albiez, Jannis Damm, Anton Matzenmiller, and Fabian Kötz. “Experimentelle
Und Numerische Untersuchung Der Dämpfungseigenschaften Geklebter Strukturen Unter
Dynamischer Beanspruchung.” In 20. Kolloquium Gemeinsame Forschung in Der Klebtechnik,
edited by DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V.
. 20. Kolloquium Gemeinsame Forschung in Der Klebtechnik, 2020.
ieee: J. Göddecke et al., “Experimentelle und numerische Untersuchung der
Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung,”
in 20. Kolloquium Gemeinsame Forschung in der Klebtechnik, 2020.
mla: Göddecke, Johannes, et al. “Experimentelle Und Numerische Untersuchung Der
Dämpfungseigenschaften Geklebter Strukturen Unter Dynamischer Beanspruchung.”
20. Kolloquium Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
Gesellschaft für Chemische Technik und Biotechnologie e.V. , 2020.
short: 'J. Göddecke, G. Meschut, D. Teutenberg, T. Ummenhofer, M. Albiez, J. Damm,
A. Matzenmiller, F. Kötz, in: DECHEMA, Gesellschaft für Chemische Technik und
Biotechnologie e.V. (Ed.), 20. Kolloquium Gemeinsame Forschung in Der Klebtechnik,
2020.'
conference:
name: 20. Kolloquium Gemeinsame Forschung in der Klebtechnik
corporate_editor:
- 'DECHEMA, Gesellschaft für Chemische Technik und Biotechnologie e.V. '
date_created: 2020-11-10T12:51:12Z
date_updated: 2022-01-06T06:54:26Z
department:
- _id: '157'
language:
- iso: eng
publication: 20. Kolloquium Gemeinsame Forschung in der Klebtechnik
series_title: 20. Kolloquium Gemeinsame Forschung in der Klebtechnik
status: public
title: Experimentelle und numerische Untersuchung der Dämpfungseigenschaften geklebter
Strukturen unter dynamischer Beanspruchung
type: conference
user_id: '59070'
year: '2020'
...