---
_id: '23409'
author:
- first_name: René
full_name: Bertling, René
id: '30050'
last_name: Bertling
- first_name: Mathias
full_name: Hack, Mathias
last_name: Hack
- first_name: Ilja
full_name: Ausner, Ilja
last_name: Ausner
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Bertling R, Hack M, Ausner I, Kenig E. CFD Simulation of Film and Rivulet
Flows on Microstructured Surfaces. In: ; 2020.'
apa: Bertling, R., Hack, M., Ausner, I., & Kenig, E. (2020). CFD Simulation
of Film and Rivulet Flows on Microstructured Surfaces. 30th European Symposium
on Computer Aided Process Engineering.
bibtex: '@inproceedings{Bertling_Hack_Ausner_Kenig_2020, title={CFD Simulation of
Film and Rivulet Flows on Microstructured Surfaces}, author={Bertling, René and
Hack, Mathias and Ausner, Ilja and Kenig, Eugeny}, year={2020} }'
chicago: Bertling, René, Mathias Hack, Ilja Ausner, and Eugeny Kenig. “CFD Simulation
of Film and Rivulet Flows on Microstructured Surfaces,” 2020.
ieee: R. Bertling, M. Hack, I. Ausner, and E. Kenig, “CFD Simulation of Film and
Rivulet Flows on Microstructured Surfaces,” presented at the 30th European Symposium
on Computer Aided Process Engineering, 2020.
mla: Bertling, René, et al. CFD Simulation of Film and Rivulet Flows on Microstructured
Surfaces. 2020.
short: 'R. Bertling, M. Hack, I. Ausner, E. Kenig, in: 2020.'
conference:
name: 30th European Symposium on Computer Aided Process Engineering
date_created: 2021-08-16T07:29:28Z
date_updated: 2023-05-01T07:53:31Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
quality_controlled: '1'
status: public
title: CFD Simulation of Film and Rivulet Flows on Microstructured Surfaces
type: conference
user_id: '30050'
year: '2020'
...
---
_id: '22965'
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: 'Rozo Vasquez J, Arian B, Riepold M, Homberg W, Trächtler A, Walther F. Microstructural
investigation on phase transformation during flow forming of the metastable austenite
AISI 304 . In: 54. Metallographie-Tagung. ; 2020:75-81.'
apa: Rozo Vasquez, J., Arian, B., Riepold, M., Homberg, W., Trächtler, A., &
Walther, F. (2020). Microstructural investigation on phase transformation during
flow forming of the metastable austenite AISI 304 . 54. Metallographie-Tagung,
75–81.
bibtex: '@inproceedings{Rozo Vasquez_Arian_Riepold_Homberg_Trächtler_Walther_2020,
title={Microstructural investigation on phase transformation during flow forming
of the metastable austenite AISI 304 }, booktitle={ 54. Metallographie-Tagung},
author={Rozo Vasquez, Julian and Arian, Bahman and Riepold, Markus and Homberg,
Werner and Trächtler, Ansgar and Walther, Frank}, year={2020}, pages={75–81} }'
chicago: Rozo Vasquez, Julian, Bahman Arian, Markus Riepold, Werner Homberg, Ansgar
Trächtler, and Frank Walther. “Microstructural Investigation on Phase Transformation
during Flow Forming of the Metastable Austenite AISI 304 .” In 54. Metallographie-Tagung,
75–81, 2020.
ieee: J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, and F. Walther,
“Microstructural investigation on phase transformation during flow forming of
the metastable austenite AISI 304 ,” in 54. Metallographie-Tagung, 2020,
pp. 75–81.
mla: Rozo Vasquez, Julian, et al. “Microstructural Investigation on Phase Transformation
during Flow Forming of the Metastable Austenite AISI 304 .” 54. Metallographie-Tagung,
2020, pp. 75–81.
short: 'J. Rozo Vasquez, B. Arian, M. Riepold, W. Homberg, A. Trächtler, F. Walther,
in: 54. Metallographie-Tagung, 2020, pp. 75–81.'
date_created: 2021-08-09T05:16:50Z
date_updated: 2023-05-02T08:20:55Z
department:
- _id: '153'
- _id: '241'
- _id: '156'
language:
- iso: eng
page: 75-81
publication: ' 54. Metallographie-Tagung'
quality_controlled: '1'
status: public
title: 'Microstructural investigation on phase transformation during flow forming
of the metastable austenite AISI 304 '
type: conference
user_id: '36287'
year: '2020'
...
---
_id: '22898'
author:
- first_name: Andreas Maximilian
full_name: Schultz, Andreas Maximilian
id: '40599'
last_name: Schultz
- first_name: Christoph
full_name: Lamers, Christoph
last_name: Lamers
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
- first_name: Richard
full_name: Lüke, Richard
last_name: Lüke
- first_name: Torben
full_name: Sauerland, Torben
id: '28007'
last_name: Sauerland
citation:
ama: Schultz AM, Lamers C, Koch R, Lüke R, Sauerland T. IRiS – Intelligente Rettung
im SmartHome. vfdb-Zeitschrift. 2020;4.
apa: Schultz, A. M., Lamers, C., Koch, R., Lüke, R., & Sauerland, T. (2020).
IRiS – Intelligente Rettung im SmartHome. vfdb-Zeitschrift, 4.
bibtex: '@article{Schultz_Lamers_Koch_Lüke_Sauerland_2020, title={IRiS – Intelligente
Rettung im SmartHome}, volume={4}, journal={vfdb-Zeitschrift}, author={Schultz,
Andreas Maximilian and Lamers, Christoph and Koch, Rainer and Lüke, Richard and
Sauerland, Torben}, year={2020} }'
chicago: Schultz, Andreas Maximilian, Christoph Lamers, Rainer Koch, Richard Lüke,
and Torben Sauerland. “IRiS – Intelligente Rettung im SmartHome.” vfdb-Zeitschrift
4 (2020).
ieee: A. M. Schultz, C. Lamers, R. Koch, R. Lüke, and T. Sauerland, “IRiS – Intelligente
Rettung im SmartHome,” vfdb-Zeitschrift, vol. 4, 2020.
mla: Schultz, Andreas Maximilian, et al. “IRiS – Intelligente Rettung im SmartHome.”
vfdb-Zeitschrift, vol. 4, 2020.
short: A.M. Schultz, C. Lamers, R. Koch, R. Lüke, T. Sauerland, vfdb-Zeitschrift
4 (2020).
date_created: 2021-07-29T10:06:11Z
date_updated: 2023-05-03T14:54:37Z
department:
- _id: '144'
intvolume: ' 4'
language:
- iso: ger
publication: vfdb-Zeitschrift
publication_status: published
status: public
title: IRiS – Intelligente Rettung im SmartHome
type: journal_article
user_id: '40599'
volume: 4
year: '2020'
...
---
_id: '42892'
abstract:
- lang: eng
text: This paper presents the results of static short-term and long-term tensile
tests for beta-nucleated joined polypropylene samples by the hot plate welding
process. In the present study different dimensionless joining displacements are
accounted for. The results show that high short-term tensile strength does not
directly transfer to high long-term tensile strength. The morphology of the weld
seam in the joined samples is examined by means of transmitted and reflected light
microscopy. For the dimensionless joining displacements of 0.75 and 0.95, stretched
spherulites are obtained. X-Ray diffraction can be used as a tool for qualitative
and quantitative analysis and eventually for differentiation of samples of various
joining displacements.
author:
- first_name: Andrea
full_name: Wübbeke, Andrea
id: '12504'
last_name: Wübbeke
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: André
full_name: Paul, André
last_name: Paul
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
- first_name: Laura
full_name: Austermeier, Laura
last_name: Austermeier
- first_name: Marcus
full_name: Fitze, Marcus
last_name: Fitze
- first_name: Mingie
full_name: Chen, Mingie
last_name: Chen
- first_name: Fabian
full_name: Jakob, Fabian
last_name: Jakob
- first_name: Hans-Peter
full_name: Heim, Hans-Peter
last_name: Heim
- first_name: Tao
full_name: Wu, Tao
last_name: Wu
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
- first_name: Marie-Luise
full_name: Röhricht, Marie-Luise
last_name: Röhricht
- first_name: Michael
full_name: Schmidt, Michael
last_name: Schmidt
citation:
ama: 'Wübbeke A, Schöppner V, Paul A, et al. Long- and Short-Term Tensile Strength
and Morphology of Joined Beta-Nucleated Polypropylene Parts. In: SPE ANTEC
2020: The Virtual Edition 5 . ; 2020.'
apa: 'Wübbeke, A., Schöppner, V., Paul, A., Tiemann, M., Austermeier, L., Fitze,
M., Chen, M., Jakob, F., Heim, H.-P., Wu, T., Niendorf, T., Röhricht, M.-L., &
Schmidt, M. (2020). Long- and Short-Term Tensile Strength and Morphology of Joined
Beta-Nucleated Polypropylene Parts. SPE ANTEC 2020: The Virtual Edition 5 .'
bibtex: '@inproceedings{Wübbeke_Schöppner_Paul_Tiemann_Austermeier_Fitze_Chen_Jakob_Heim_Wu_et
al._2020, title={Long- and Short-Term Tensile Strength and Morphology of Joined
Beta-Nucleated Polypropylene Parts}, booktitle={SPE ANTEC 2020: The Virtual Edition
5 }, author={Wübbeke, Andrea and Schöppner, Volker and Paul, André and Tiemann,
Michael and Austermeier, Laura and Fitze, Marcus and Chen, Mingie and Jakob, Fabian
and Heim, Hans-Peter and Wu, Tao and et al.}, year={2020} }'
chicago: 'Wübbeke, Andrea, Volker Schöppner, André Paul, Michael Tiemann, Laura
Austermeier, Marcus Fitze, Mingie Chen, et al. “Long- and Short-Term Tensile Strength
and Morphology of Joined Beta-Nucleated Polypropylene Parts.” In SPE ANTEC
2020: The Virtual Edition 5 , 2020.'
ieee: A. Wübbeke et al., “Long- and Short-Term Tensile Strength and Morphology
of Joined Beta-Nucleated Polypropylene Parts,” 2020.
mla: 'Wübbeke, Andrea, et al. “Long- and Short-Term Tensile Strength and Morphology
of Joined Beta-Nucleated Polypropylene Parts.” SPE ANTEC 2020: The Virtual
Edition 5 , 2020.'
short: 'A. Wübbeke, V. Schöppner, A. Paul, M. Tiemann, L. Austermeier, M. Fitze,
M. Chen, F. Jakob, H.-P. Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt,
in: SPE ANTEC 2020: The Virtual Edition 5 , 2020.'
date_created: 2023-03-09T12:20:23Z
date_updated: 2023-05-05T10:03:33Z
department:
- _id: '35'
- _id: '2'
- _id: '307'
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: 'SPE ANTEC 2020: The Virtual Edition 5 '
status: public
title: Long- and Short-Term Tensile Strength and Morphology of Joined Beta-Nucleated
Polypropylene Parts
type: conference
user_id: '14931'
year: '2020'
...
---
_id: '24245'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Andrea
full_name: Wübbeke, Andrea
id: '12504'
last_name: Wübbeke
- first_name: B.
full_name: Geißler, B.
last_name: Geißler
- first_name: M.
full_name: Schmidt, M.
last_name: Schmidt
- first_name: A.
full_name: Maginer, A.
last_name: Maginer
- first_name: T.
full_name: Wu, T.
last_name: Wu
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
- first_name: F.
full_name: Jakob, F.
last_name: Jakob
- first_name: H.
full_name: Heim, H.
last_name: Heim
citation:
ama: 'Schöppner V, Wübbeke A, Geißler B, et al. Investigation of residual stresses
of hot plate welding. In: 73rd Annual Assembly of the International Institute
of Welding (IIW). Springer-Verlag; 2020.'
apa: Schöppner, V., Wübbeke, A., Geißler, B., Schmidt, M., Maginer, A., Wu, T.,
Niendorf, T., Jakob, F., & Heim, H. (2020). Investigation of residual stresses
of hot plate welding. 73rd Annual Assembly of the International Institute of
Welding (IIW). 73rd Annual Assembly of the International Institute of Welding
(IIW), Marina Bay (Singapore).
bibtex: '@inproceedings{Schöppner_Wübbeke_Geißler_Schmidt_Maginer_Wu_Niendorf_Jakob_Heim_2020,
place={Marina Bay (Singapore)}, title={Investigation of residual stresses of hot
plate welding}, booktitle={73rd Annual Assembly of the International Institute
of Welding (IIW)}, publisher={Springer-Verlag}, author={Schöppner, Volker and
Wübbeke, Andrea and Geißler, B. and Schmidt, M. and Maginer, A. and Wu, T. and
Niendorf, T. and Jakob, F. and Heim, H.}, year={2020} }'
chicago: 'Schöppner, Volker, Andrea Wübbeke, B. Geißler, M. Schmidt, A. Maginer,
T. Wu, T. Niendorf, F. Jakob, and H. Heim. “Investigation of Residual Stresses
of Hot Plate Welding.” In 73rd Annual Assembly of the International Institute
of Welding (IIW). Marina Bay (Singapore): Springer-Verlag, 2020.'
ieee: V. Schöppner et al., “Investigation of residual stresses of hot plate
welding,” presented at the 73rd Annual Assembly of the International Institute
of Welding (IIW), Marina Bay (Singapore), 2020.
mla: Schöppner, Volker, et al. “Investigation of Residual Stresses of Hot Plate
Welding.” 73rd Annual Assembly of the International Institute of Welding (IIW),
Springer-Verlag, 2020.
short: 'V. Schöppner, A. Wübbeke, B. Geißler, M. Schmidt, A. Maginer, T. Wu, T.
Niendorf, F. Jakob, H. Heim, in: 73rd Annual Assembly of the International Institute
of Welding (IIW), Springer-Verlag, Marina Bay (Singapore), 2020.'
conference:
location: Marina Bay (Singapore)
name: 73rd Annual Assembly of the International Institute of Welding (IIW)
date_created: 2021-09-13T08:59:34Z
date_updated: 2023-05-05T10:10:15Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Marina Bay (Singapore)
publication: 73rd Annual Assembly of the International Institute of Welding (IIW)
publisher: Springer-Verlag
status: public
title: Investigation of residual stresses of hot plate welding
type: conference
user_id: '14931'
year: '2020'
...
---
_id: '24236'
abstract:
- lang: eng
text: In diesem Artikel werden das Scherzugverhalten und der morphologische Zustand
von konturgeschweißtem Polypropylen (PP) mit einem Massenanteil von 0,2% Ruß untersucht.
Dabei zeigen die Ergebnisse ...
article_type: original
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Andrea
full_name: Wübbeke, Andrea
id: '12504'
last_name: Wübbeke
- first_name: 'Fabian '
full_name: 'Schriegel, Fabian '
last_name: Schriegel
- first_name: 'Andrej '
full_name: 'Paul, Andrej '
last_name: Paul
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
- first_name: 'Bastian '
full_name: 'Geißler, Bastian '
last_name: Geißler
- first_name: 'Michael '
full_name: 'Schmidt, Michael '
last_name: Schmidt
- first_name: 'Arnaud '
full_name: 'Magnier, Arnaud '
last_name: Magnier
- first_name: 'Thomas '
full_name: 'Niendorf, Thomas '
last_name: Niendorf
citation:
ama: Schöppner V, Wübbeke A, Schriegel F, et al. Selected Aspects for the Assessment
of Laser Transmission Welding. Joining Plastics. Published online 2020:30-35.
apa: Schöppner, V., Wübbeke, A., Schriegel, F., Paul, A., Tiemann, M., Geißler,
B., Schmidt, M., Magnier, A., & Niendorf, T. (2020). Selected Aspects for
the Assessment of Laser Transmission Welding. Joining Plastics, 30–35.
bibtex: '@article{Schöppner_Wübbeke_Schriegel_Paul_Tiemann_Geißler_Schmidt_Magnier_Niendorf_2020,
title={Selected Aspects for the Assessment of Laser Transmission Welding}, journal={Joining
Plastics}, author={Schöppner, Volker and Wübbeke, Andrea and Schriegel, Fabian and
Paul, Andrej and Tiemann, Michael and Geißler, Bastian and Schmidt, Michael and
Magnier, Arnaud and Niendorf, Thomas }, year={2020}, pages={30–35} }'
chicago: Schöppner, Volker, Andrea Wübbeke, Fabian Schriegel, Andrej Paul, Michael
Tiemann, Bastian Geißler, Michael Schmidt, Arnaud Magnier, and Thomas Niendorf.
“Selected Aspects for the Assessment of Laser Transmission Welding.” Joining
Plastics, 2020, 30–35.
ieee: V. Schöppner et al., “Selected Aspects for the Assessment of Laser
Transmission Welding,” Joining Plastics, pp. 30–35, 2020.
mla: Schöppner, Volker, et al. “Selected Aspects for the Assessment of Laser Transmission
Welding.” Joining Plastics, 2020, pp. 30–35.
short: V. Schöppner, A. Wübbeke, F. Schriegel, A. Paul, M. Tiemann, B. Geißler,
M. Schmidt, A. Magnier, T. Niendorf, Joining Plastics (2020) 30–35.
date_created: 2021-09-13T08:43:53Z
date_updated: 2023-05-05T10:03:45Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
- _id: '35'
- _id: '307'
- _id: '2'
language:
- iso: eng
page: 30-35
publication: Joining Plastics
quality_controlled: '1'
status: public
title: Selected Aspects for the Assessment of Laser Transmission Welding
type: journal_article
user_id: '14931'
year: '2020'
...
---
_id: '24472'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Andrea
full_name: Wübbeke, Andrea
id: '12504'
last_name: Wübbeke
- first_name: A.
full_name: Paul, A.
last_name: Paul
- first_name: M.
full_name: Tiemann, M.
last_name: Tiemann
- first_name: Laura
full_name: Austermeier, Laura
id: '45326'
last_name: Austermeier
- first_name: M.
full_name: Fitze, M.
last_name: Fitze
- first_name: M.
full_name: Chen, M.
last_name: Chen
- first_name: F.
full_name: Jakob, F.
last_name: Jakob
- first_name: H.-P-
full_name: Heim, H.-P-
last_name: Heim
- first_name: T.
full_name: Wu, T.
last_name: Wu
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
- first_name: M.-L.
full_name: Röhricht, M.-L.
last_name: Röhricht
- first_name: M.
full_name: Schmidt, M.
last_name: Schmidt
citation:
ama: 'Schöppner V, Wübbeke A, Paul A, et al. LONG- AND SHORT-TERM TENSILE STRENGTH
AND MORPHOLOGY OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS. In: ANTEC20.
; 2020.'
apa: Schöppner, V., Wübbeke, A., Paul, A., Tiemann, M., Austermeier, L., Fitze,
M., Chen, M., Jakob, F., Heim, H.-P.-, Wu, T., Niendorf, T., Röhricht, M.-L.,
& Schmidt, M. (2020). LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY
OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS. ANTEC20. ANTEC20, Texas (USA).
bibtex: '@inproceedings{Schöppner_Wübbeke_Paul_Tiemann_Austermeier_Fitze_Chen_Jakob_Heim_Wu_et
al._2020, title={LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED
BETA-NUCLEATED POLYPROPYLENE PARTS}, booktitle={ANTEC20}, author={Schöppner, Volker
and Wübbeke, Andrea and Paul, A. and Tiemann, M. and Austermeier, Laura and Fitze,
M. and Chen, M. and Jakob, F. and Heim, H.-P- and Wu, T. and et al.}, year={2020}
}'
chicago: Schöppner, Volker, Andrea Wübbeke, A. Paul, M. Tiemann, Laura Austermeier,
M. Fitze, M. Chen, et al. “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY
OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS.” In ANTEC20, 2020.
ieee: V. Schöppner et al., “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY
OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS,” presented at the ANTEC20, Texas
(USA), 2020.
mla: Schöppner, Volker, et al. “LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY
OF JOINED BETA-NUCLEATED POLYPROPYLENE PARTS.” ANTEC20, 2020.
short: 'V. Schöppner, A. Wübbeke, A. Paul, M. Tiemann, L. Austermeier, M. Fitze,
M. Chen, F. Jakob, H.-P.- Heim, T. Wu, T. Niendorf, M.-L. Röhricht, M. Schmidt,
in: ANTEC20, 2020.'
conference:
location: Texas (USA)
name: ANTEC20
date_created: 2021-09-15T07:07:46Z
date_updated: 2023-05-05T10:09:51Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: ANTEC20
status: public
title: LONG- AND SHORT-TERM TENSILE STRENGTH AND MORPHOLOGY OF JOINED BETA-NUCLEATED
POLYPROPYLENE PARTS
type: conference
user_id: '14931'
year: '2020'
...
---
_id: '30713'
author:
- first_name: Tim
full_name: Rostek, Tim
id: '3469'
last_name: Rostek
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: Rostek T, Wiens E, Homberg W. Joining with Versatile Friction-Spun Joint Connectors.
Procedia Manufacturing. 2020;47:395-399. doi:10.1016/j.promfg.2020.04.313
apa: Rostek, T., Wiens, E., & Homberg, W. (2020). Joining with Versatile Friction-Spun
Joint Connectors. Procedia Manufacturing, 47, 395–399. https://doi.org/10.1016/j.promfg.2020.04.313
bibtex: '@article{Rostek_Wiens_Homberg_2020, title={Joining with Versatile Friction-Spun
Joint Connectors}, volume={47}, DOI={10.1016/j.promfg.2020.04.313},
journal={Procedia Manufacturing}, publisher={ Elsevier Ltd}, author={Rostek, Tim
and Wiens, Eugen and Homberg, Werner}, year={2020}, pages={395–399} }'
chicago: 'Rostek, Tim, Eugen Wiens, and Werner Homberg. “Joining with Versatile
Friction-Spun Joint Connectors.” Procedia Manufacturing 47 (2020): 395–99.
https://doi.org/10.1016/j.promfg.2020.04.313.'
ieee: 'T. Rostek, E. Wiens, and W. Homberg, “Joining with Versatile Friction-Spun
Joint Connectors,” Procedia Manufacturing, vol. 47, pp. 395–399, 2020,
doi: 10.1016/j.promfg.2020.04.313.'
mla: Rostek, Tim, et al. “Joining with Versatile Friction-Spun Joint Connectors.”
Procedia Manufacturing, vol. 47, Elsevier Ltd, 2020, pp. 395–99, doi:10.1016/j.promfg.2020.04.313.
short: T. Rostek, E. Wiens, W. Homberg, Procedia Manufacturing 47 (2020) 395–399.
conference:
name: 23rd International Conference on Material Forming (ESAFORM 2020)
date_created: 2022-03-29T09:39:07Z
date_updated: 2023-05-05T11:07:33Z
department:
- _id: '630'
- _id: '156'
doi: 10.1016/j.promfg.2020.04.313
intvolume: ' 47'
language:
- iso: eng
page: 395-399
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
publication: Procedia Manufacturing
publication_identifier:
unknown:
- 2351-9789
publisher: ' Elsevier Ltd'
quality_controlled: '1'
status: public
title: Joining with Versatile Friction-Spun Joint Connectors
type: journal_article
user_id: '7888'
volume: 47
year: '2020'
...
---
_id: '21447'
abstract:
- lang: eng
text: "Even though the spectrum of parts is expected to shift over the long term
as a result of increasing e-mobility, there is still an extremely high demand
for complex components made of high-strength materials which can only be produced
by hydroforming technologies. The innovative combination of hydroforming processes
with other forming processes, as well as the improvement of the processes themselves,
offers considerable potential for improvement. \r\nA number of promising ways
of improving the hydroforming process chain are therefore the subject of this
contribution. The focus of the article is on possible approaches for combining
(incremental) pre- and post-forming operations, which can permit considerable
improvements in both quality and features at a reduced cost. Furthermore, a novel
combination of quasi-static and high-speed forming processes is presented, leading
to an improved overall forming process (with a high application potential) for
the production of complex parts. \r\n"
author:
- first_name: Eugen
full_name: Wiens, Eugen
id: '7888'
last_name: Wiens
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
citation:
ama: 'Wiens E, Djakow E, Homberg W. Some ideas for the further development of hydroforming
process chains. In: Nebu/Nehy 2020. ; 2020.'
apa: Wiens, E., Djakow, E., & Homberg, W. (2020). Some ideas for the further
development of hydroforming process chains. Nebu/Nehy 2020.
bibtex: '@inproceedings{Wiens_Djakow_Homberg_2020, title={Some ideas for the further
development of hydroforming process chains}, booktitle={Nebu/Nehy 2020}, author={Wiens,
Eugen and Djakow, Eugen and Homberg, Werner}, year={2020} }'
chicago: Wiens, Eugen, Eugen Djakow, and Werner Homberg. “Some Ideas for the Further
Development of Hydroforming Process Chains.” In Nebu/Nehy 2020, 2020.
ieee: E. Wiens, E. Djakow, and W. Homberg, “Some ideas for the further development
of hydroforming process chains,” 2020.
mla: Wiens, Eugen, et al. “Some Ideas for the Further Development of Hydroforming
Process Chains.” Nebu/Nehy 2020, 2020.
short: 'E. Wiens, E. Djakow, W. Homberg, in: Nebu/Nehy 2020, 2020.'
date_created: 2021-03-11T10:50:31Z
date_updated: 2023-05-05T11:22:27Z
department:
- _id: '156'
keyword:
- Hydroforming
- Incremental Forming
- Internal Flow-turning
- High-speed Forming
language:
- iso: eng
publication: Nebu/Nehy 2020
status: public
title: Some ideas for the further development of hydroforming process chains
type: conference
user_id: '7888'
year: '2020'
...
---
_id: '23523'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Julian
full_name: Hentze, Julian
id: '13342'
last_name: Hentze
- first_name: Philipp
full_name: Hesse, Philipp
id: '60633'
last_name: Hesse
citation:
ama: 'Gräßler I, Hentze J, Hesse P. Anchoring Points as a Method for Interdisciplinary
Systems Engineering with the New V-Model. In: TMCE 2020 Repository, at tmce.io.tudelft.nl/proceedings,
ed. Proceedings of TMCE Conference 2020. Delft University of Technology;
2020:279-286.'
apa: Gräßler, I., Hentze, J., & Hesse, P. (2020). Anchoring Points as a Method
for Interdisciplinary Systems Engineering with the New V-Model. In TMCE 2020 Repository,
at tmce.io.tudelft.nl/proceedings (Ed.), Proceedings of TMCE Conference 2020
(pp. 279–286). Delft University of Technology.
bibtex: '@inproceedings{Gräßler_Hentze_Hesse_2020, title={Anchoring Points as a
Method for Interdisciplinary Systems Engineering with the New V-Model}, booktitle={Proceedings
of TMCE Conference 2020}, publisher={Delft University of Technology}, author={Gräßler,
Iris and Hentze, Julian and Hesse, Philipp}, editor={TMCE 2020 Repository, at
tmce.io.tudelft.nl/proceedings}, year={2020}, pages={279–286} }'
chicago: Gräßler, Iris, Julian Hentze, and Philipp Hesse. “Anchoring Points as a
Method for Interdisciplinary Systems Engineering with the New V-Model.” In Proceedings
of TMCE Conference 2020, edited by TMCE 2020 Repository, at tmce.io.tudelft.nl/proceedings,
279–86. Delft University of Technology, 2020.
ieee: I. Gräßler, J. Hentze, and P. Hesse, “Anchoring Points as a Method for Interdisciplinary
Systems Engineering with the New V-Model,” in Proceedings of TMCE Conference
2020, 2020, pp. 279–286.
mla: Gräßler, Iris, et al. “Anchoring Points as a Method for Interdisciplinary Systems
Engineering with the New V-Model.” Proceedings of TMCE Conference 2020,
edited by TMCE 2020 Repository, at tmce.io.tudelft.nl/proceedings, Delft University
of Technology, 2020, pp. 279–86.
short: 'I. Gräßler, J. Hentze, P. Hesse, in: TMCE 2020 Repository, at tmce.io.tudelft.nl/proceedings
(Ed.), Proceedings of TMCE Conference 2020, Delft University of Technology, 2020,
pp. 279–286.'
corporate_editor:
- TMCE 2020 Repository, at tmce.io.tudelft.nl/proceedings
date_created: 2021-08-25T13:01:07Z
date_updated: 2023-05-10T07:30:40Z
department:
- _id: '152'
language:
- iso: eng
page: 279-286
publication: Proceedings of TMCE Conference 2020
publication_identifier:
isbn:
- 978-94-6384-131-
publisher: Delft University of Technology
status: public
title: Anchoring Points as a Method for Interdisciplinary Systems Engineering with
the New V-Model
type: conference
user_id: '60633'
year: '2020'
...
---
_id: '45072'
author:
- first_name: Jan
full_name: Ditter, Jan
last_name: Ditter
- first_name: Tobias
full_name: Aubel, Tobias
last_name: Aubel
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
citation:
ama: Ditter J, Aubel T, Meschut G. Simple Determination of Fast Curing Parameters
for Bonded Structures. adhesion ADHESIVES + SEALANTS. 2020;17(1):30-35.
doi:10.1007/s35784-020-0031-2
apa: Ditter, J., Aubel, T., & Meschut, G. (2020). Simple Determination of Fast
Curing Parameters for Bonded Structures. Adhesion ADHESIVES + SEALANTS,
17(1), 30–35. https://doi.org/10.1007/s35784-020-0031-2
bibtex: '@article{Ditter_Aubel_Meschut_2020, title={Simple Determination of Fast
Curing Parameters for Bonded Structures}, volume={17}, DOI={10.1007/s35784-020-0031-2},
number={1}, journal={adhesion ADHESIVES + SEALANTS}, publisher={Springer Science
and Business Media LLC}, author={Ditter, Jan and Aubel, Tobias and Meschut, Gerson},
year={2020}, pages={30–35} }'
chicago: 'Ditter, Jan, Tobias Aubel, and Gerson Meschut. “Simple Determination of
Fast Curing Parameters for Bonded Structures.” Adhesion ADHESIVES + SEALANTS
17, no. 1 (2020): 30–35. https://doi.org/10.1007/s35784-020-0031-2.'
ieee: 'J. Ditter, T. Aubel, and G. Meschut, “Simple Determination of Fast Curing
Parameters for Bonded Structures,” adhesion ADHESIVES + SEALANTS, vol.
17, no. 1, pp. 30–35, 2020, doi: 10.1007/s35784-020-0031-2.'
mla: Ditter, Jan, et al. “Simple Determination of Fast Curing Parameters for Bonded
Structures.” Adhesion ADHESIVES + SEALANTS, vol. 17, no. 1, Springer Science
and Business Media LLC, 2020, pp. 30–35, doi:10.1007/s35784-020-0031-2.
short: J. Ditter, T. Aubel, G. Meschut, Adhesion ADHESIVES + SEALANTS 17 (2020)
30–35.
date_created: 2023-05-17T10:11:10Z
date_updated: 2023-05-17T10:11:32Z
department:
- _id: '157'
doi: 10.1007/s35784-020-0031-2
intvolume: ' 17'
issue: '1'
keyword:
- Polymers and Plastics
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 30-35
publication: adhesion ADHESIVES + SEALANTS
publication_identifier:
issn:
- 2192-2624
- 2195-6545
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Simple Determination of Fast Curing Parameters for Bonded Structures
type: journal_article
user_id: '53912'
volume: 17
year: '2020'
...
---
_id: '45077'
author:
- first_name: Jan
full_name: Ditter, Jan
last_name: Ditter
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
- first_name: Tim Michael
full_name: Wibbeke, Tim Michael
last_name: Wibbeke
citation:
ama: Ditter J, Meschut G, Wibbeke TM. Joining and Disjoining Concepts for Adhesive
Bonded Lightweight Structures. adhesion ADHESIVES + SEALANTS. 2020;16(3):12-17.
doi:10.1007/s35784-019-0016-1
apa: Ditter, J., Meschut, G., & Wibbeke, T. M. (2020). Joining and Disjoining
Concepts for Adhesive Bonded Lightweight Structures. Adhesion ADHESIVES + SEALANTS,
16(3), 12–17. https://doi.org/10.1007/s35784-019-0016-1
bibtex: '@article{Ditter_Meschut_Wibbeke_2020, title={Joining and Disjoining Concepts
for Adhesive Bonded Lightweight Structures}, volume={16}, DOI={10.1007/s35784-019-0016-1},
number={3}, journal={adhesion ADHESIVES + SEALANTS}, publisher={Springer Science
and Business Media LLC}, author={Ditter, Jan and Meschut, Gerson and Wibbeke,
Tim Michael}, year={2020}, pages={12–17} }'
chicago: 'Ditter, Jan, Gerson Meschut, and Tim Michael Wibbeke. “Joining and Disjoining
Concepts for Adhesive Bonded Lightweight Structures.” Adhesion ADHESIVES +
SEALANTS 16, no. 3 (2020): 12–17. https://doi.org/10.1007/s35784-019-0016-1.'
ieee: 'J. Ditter, G. Meschut, and T. M. Wibbeke, “Joining and Disjoining Concepts
for Adhesive Bonded Lightweight Structures,” adhesion ADHESIVES + SEALANTS,
vol. 16, no. 3, pp. 12–17, 2020, doi: 10.1007/s35784-019-0016-1.'
mla: Ditter, Jan, et al. “Joining and Disjoining Concepts for Adhesive Bonded Lightweight
Structures.” Adhesion ADHESIVES + SEALANTS, vol. 16, no. 3, Springer Science
and Business Media LLC, 2020, pp. 12–17, doi:10.1007/s35784-019-0016-1.
short: J. Ditter, G. Meschut, T.M. Wibbeke, Adhesion ADHESIVES + SEALANTS 16 (2020)
12–17.
date_created: 2023-05-17T10:19:40Z
date_updated: 2023-05-17T10:20:00Z
department:
- _id: '157'
doi: 10.1007/s35784-019-0016-1
intvolume: ' 16'
issue: '3'
keyword:
- Polymers and Plastics
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 12-17
publication: adhesion ADHESIVES + SEALANTS
publication_identifier:
issn:
- 2192-2624
- 2195-6545
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Joining and Disjoining Concepts for Adhesive Bonded Lightweight Structures
type: journal_article
user_id: '53912'
volume: 16
year: '2020'
...
---
_id: '41519'
abstract:
- lang: eng
text: AbstractDifferent studies have been demonstrated
that the surface integrity of substrate bulk materials to be coated has a significant
impact on the adhesion of thermally sprayed coatings. It is known that the surface
integrity of parts processed by selective laser melting (SLM) differs from those
obtained from bulk materials. Although 316L stainless steel is among the most
investigated material for SLM, the adhesion of thermally sprayed coatings on 316L
stainless steel substrates processed by SLM has not been studied yet. This study
aims at evaluating the effect of various mechanical pre-treatments onto 316L stainless
steel substrates processed by SLM and their effect on the adhesion of high velocity
oxy-fuel (HVOF)-sprayed WC-Co coatings. To differentiate between topographical
effects and residual stress-related phenomena, a stress-relief heat treatment
of the SLM substrates served as a reference throughout the investigations. The
differently pre-treated SLM substrates were investigated with regard to the surface
roughness and residual stresses. For the HVOF-sprayed SLM composites, Vickers
interfacial indentation tests were conducted to assess the resulting coating adhesion.
The findings demonstrated that the HVOF-sprayed WC-Co coatings predominantly exhibit
good adhesion to the SLM 316L substrates. However, it was found that the stress
state in the SLM 316L substrate surface is more likely to affect the adhesion
of the WC-Co coating, while the substrate surface roughness showed a marginal
effect.
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Leif
full_name: Hagen, Leif
last_name: Hagen
- first_name: Christoph
full_name: Schaak, Christoph
last_name: Schaak
- first_name: J.
full_name: Liß, J.
last_name: Liß
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mehmet Esat
full_name: Aydinöz, Mehmet Esat
last_name: Aydinöz
- first_name: Kai-Uwe
full_name: Garthe, Kai-Uwe
id: '11199'
last_name: Garthe
orcid: 0000-0003-0741-3812
citation:
ama: Tillmann W, Hagen L, Schaak C, et al. Adhesion of HVOF-Sprayed WC-Co Coatings
on 316L Substrates Processed by SLM. Journal of Thermal Spray Technology.
2020;29(6):1396-1409. doi:10.1007/s11666-020-01081-y
apa: Tillmann, W., Hagen, L., Schaak, C., Liß, J., Schaper, M., Hoyer, K.-P., Aydinöz,
M. E., & Garthe, K.-U. (2020). Adhesion of HVOF-Sprayed WC-Co Coatings on
316L Substrates Processed by SLM. Journal of Thermal Spray Technology,
29(6), 1396–1409. https://doi.org/10.1007/s11666-020-01081-y
bibtex: '@article{Tillmann_Hagen_Schaak_Liß_Schaper_Hoyer_Aydinöz_Garthe_2020, title={Adhesion
of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM}, volume={29},
DOI={10.1007/s11666-020-01081-y},
number={6}, journal={Journal of Thermal Spray Technology}, publisher={Springer
Science and Business Media LLC}, author={Tillmann, Wolfgang and Hagen, Leif and
Schaak, Christoph and Liß, J. and Schaper, Mirko and Hoyer, Kay-Peter and Aydinöz,
Mehmet Esat and Garthe, Kai-Uwe}, year={2020}, pages={1396–1409} }'
chicago: 'Tillmann, Wolfgang, Leif Hagen, Christoph Schaak, J. Liß, Mirko Schaper,
Kay-Peter Hoyer, Mehmet Esat Aydinöz, and Kai-Uwe Garthe. “Adhesion of HVOF-Sprayed
WC-Co Coatings on 316L Substrates Processed by SLM.” Journal of Thermal Spray
Technology 29, no. 6 (2020): 1396–1409. https://doi.org/10.1007/s11666-020-01081-y.'
ieee: 'W. Tillmann et al., “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L
Substrates Processed by SLM,” Journal of Thermal Spray Technology, vol.
29, no. 6, pp. 1396–1409, 2020, doi: 10.1007/s11666-020-01081-y.'
mla: Tillmann, Wolfgang, et al. “Adhesion of HVOF-Sprayed WC-Co Coatings on 316L
Substrates Processed by SLM.” Journal of Thermal Spray Technology, vol.
29, no. 6, Springer Science and Business Media LLC, 2020, pp. 1396–409, doi:10.1007/s11666-020-01081-y.
short: W. Tillmann, L. Hagen, C. Schaak, J. Liß, M. Schaper, K.-P. Hoyer, M.E. Aydinöz,
K.-U. Garthe, Journal of Thermal Spray Technology 29 (2020) 1396–1409.
date_created: 2023-02-02T14:41:03Z
date_updated: 2023-06-01T14:29:14Z
department:
- _id: '9'
- _id: '158'
doi: 10.1007/s11666-020-01081-y
intvolume: ' 29'
issue: '6'
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Condensed Matter Physics
language:
- iso: eng
page: 1396-1409
publication: Journal of Thermal Spray Technology
publication_identifier:
issn:
- 1059-9630
- 1544-1016
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Adhesion of HVOF-Sprayed WC-Co Coatings on 316L Substrates Processed by SLM
type: journal_article
user_id: '43720'
volume: 29
year: '2020'
...
---
_id: '41518'
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Leif
full_name: Hagen, Leif
last_name: Hagen
- first_name: Kai-Uwe
full_name: Garthe, Kai-Uwe
id: '11199'
last_name: Garthe
orcid: 0000-0003-0741-3812
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Tillmann W, Hagen L, Garthe K-U, Hoyer K-P, Schaper M. Effect of substrate
pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt
coated additive manufactured 316 L substrates. Materialwissenschaft und Werkstofftechnik.
2020;51(11):1452-1464. doi:10.1002/mawe.202000109
apa: Tillmann, W., Hagen, L., Garthe, K.-U., Hoyer, K.-P., & Schaper, M. (2020).
Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten
carbide‐cobalt coated additive manufactured 316 L substrates. Materialwissenschaft
Und Werkstofftechnik, 51(11), 1452–1464. https://doi.org/10.1002/mawe.202000109
bibtex: '@article{Tillmann_Hagen_Garthe_Hoyer_Schaper_2020, title={Effect of substrate
pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt
coated additive manufactured 316 L substrates}, volume={51}, DOI={10.1002/mawe.202000109},
number={11}, journal={Materialwissenschaft und Werkstofftechnik}, publisher={Wiley},
author={Tillmann, Wolfgang and Hagen, Leif and Garthe, Kai-Uwe and Hoyer, Kay-Peter
and Schaper, Mirko}, year={2020}, pages={1452–1464} }'
chicago: 'Tillmann, Wolfgang, Leif Hagen, Kai-Uwe Garthe, Kay-Peter Hoyer, and Mirko
Schaper. “Effect of Substrate Pre‐treatment on the Low Cycle Fatigue Performance
of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L Substrates.” Materialwissenschaft
Und Werkstofftechnik 51, no. 11 (2020): 1452–64. https://doi.org/10.1002/mawe.202000109.'
ieee: 'W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, and M. Schaper, “Effect
of substrate pre‐treatment on the low cycle fatigue performance of tungsten carbide‐cobalt
coated additive manufactured 316 L substrates,” Materialwissenschaft und Werkstofftechnik,
vol. 51, no. 11, pp. 1452–1464, 2020, doi: 10.1002/mawe.202000109.'
mla: Tillmann, Wolfgang, et al. “Effect of Substrate Pre‐treatment on the Low Cycle
Fatigue Performance of Tungsten Carbide‐cobalt Coated Additive Manufactured 316 L
Substrates.” Materialwissenschaft Und Werkstofftechnik, vol. 51, no. 11,
Wiley, 2020, pp. 1452–64, doi:10.1002/mawe.202000109.
short: W. Tillmann, L. Hagen, K.-U. Garthe, K.-P. Hoyer, M. Schaper, Materialwissenschaft
Und Werkstofftechnik 51 (2020) 1452–1464.
date_created: 2023-02-02T14:40:14Z
date_updated: 2023-06-01T14:29:04Z
department:
- _id: '9'
- _id: '158'
doi: 10.1002/mawe.202000109
intvolume: ' 51'
issue: '11'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
page: 1452-1464
publication: Materialwissenschaft und Werkstofftechnik
publication_identifier:
issn:
- 0933-5137
- 1521-4052
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Effect of substrate pre‐treatment on the low cycle fatigue performance of tungsten
carbide‐cobalt coated additive manufactured 316 L substrates
type: journal_article
user_id: '43720'
volume: 51
year: '2020'
...
---
_id: '23797'
abstract:
- lang: eng
text: "Abstract\r\nSafety-relevant components in
automobiles require materials that combine high strength with sufficient residual
ductility and high-energy absorption. A graded thermo-mechanical treatment of
the press-hardening steel 22MnB5 with graded microstructure can provide a material
with such properties. Different austenitization temperatures, cooling and forming
conditions within a sheet part lead to the development of microstructures with
mixed phase compositions. To determine the resulting phase contents in such graded
processed parts, a large number of dilatometric tests are usually required. With
a non-contact characterization method, it is possible to detect local phase transformations
on an inhomogeneously treated flat steel specimen. For press-hardening steel after
heat treatment and thermo-mechanical processing, correlations between austenitization
temperature, hot deformation strain, microstructure, and hardness are established."
article_type: original
author:
- first_name: Alexander
full_name: Reitz, Alexander
id: '24803'
last_name: Reitz
orcid: 0000-0001-9047-467X
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Reitz A, Grydin O, Schaper M. Characterization of Phase Transformations During
Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5. Metallurgical
and Materials Transactions A. Published online 2020:5628-5638. doi:10.1007/s11661-020-05976-x
apa: Reitz, A., Grydin, O., & Schaper, M. (2020). Characterization of Phase
Transformations During Graded Thermo-Mechanical Processing of Press-Hardening
Sheet Steel 22MnB5. Metallurgical and Materials Transactions A, 5628–5638.
https://doi.org/10.1007/s11661-020-05976-x
bibtex: '@article{Reitz_Grydin_Schaper_2020, title={Characterization of Phase Transformations
During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5},
DOI={10.1007/s11661-020-05976-x},
journal={Metallurgical and Materials Transactions A}, publisher={Springer}, author={Reitz,
Alexander and Grydin, Olexandr and Schaper, Mirko}, year={2020}, pages={5628–5638}
}'
chicago: Reitz, Alexander, Olexandr Grydin, and Mirko Schaper. “Characterization
of Phase Transformations During Graded Thermo-Mechanical Processing of Press-Hardening
Sheet Steel 22MnB5.” Metallurgical and Materials Transactions A, 2020,
5628–38. https://doi.org/10.1007/s11661-020-05976-x.
ieee: 'A. Reitz, O. Grydin, and M. Schaper, “Characterization of Phase Transformations
During Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5,”
Metallurgical and Materials Transactions A, pp. 5628–5638, 2020, doi: 10.1007/s11661-020-05976-x.'
mla: Reitz, Alexander, et al. “Characterization of Phase Transformations During
Graded Thermo-Mechanical Processing of Press-Hardening Sheet Steel 22MnB5.” Metallurgical
and Materials Transactions A, Springer, 2020, pp. 5628–38, doi:10.1007/s11661-020-05976-x.
short: A. Reitz, O. Grydin, M. Schaper, Metallurgical and Materials Transactions
A (2020) 5628–5638.
date_created: 2021-09-06T12:55:51Z
date_updated: 2023-06-01T14:30:12Z
department:
- _id: '158'
- _id: '321'
doi: 10.1007/s11661-020-05976-x
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1007/s11661-020-05976-x
oa: '1'
page: 5628-5638
publication: Metallurgical and Materials Transactions A
publication_identifier:
issn:
- 1073-5623
- 1543-1940
publication_status: published
publisher: Springer
quality_controlled: '1'
status: public
title: Characterization of Phase Transformations During Graded Thermo-Mechanical Processing
of Press-Hardening Sheet Steel 22MnB5
type: journal_article
user_id: '43720'
year: '2020'
...
---
_id: '24573'
abstract:
- lang: eng
text: Al-Li based alloys are attractive materials for the aerospace industry.
The twin-roll casting of such materials could provide properties not achievable
by conventional direct-chill casting and downstream processing methods due to
significantly higher solidification rates. An Al-Li-Cu-Mg-Zr alloy was twin-roll
cast with the same alloy containing a small addition of Sc. The microstructure
of as-cast materials and the influence of Sc on the behavior of the alloy at elevated
temperatures were studied by means of light and electron microscopy and by resistivity
measurements. A fine-grained structure was formed during twin-roll casting, but
several surface and internal defects were found on the strips, which should be
suppressed by a further adjustment of the casting conditions. The addition of
Sc had a positive effect on grain size uniformity and microstructure stabilization
at elevated temperatures, as shown by the precipitation of a fine dispersion of
coherent Sc- and Zr-containing precipitates.
article_number: '987'
article_type: original
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mykhailo
full_name: Stolbchenko, Mykhailo
last_name: Stolbchenko
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Sára
full_name: Belejová, Sára
last_name: Belejová
- first_name: Rostislav
full_name: Králík, Rostislav
last_name: Králík
- first_name: Lucia
full_name: Bajtošová, Lucia
last_name: Bajtošová
- first_name: Barbora
full_name: Křivská, Barbora
last_name: Křivská
- first_name: Michal
full_name: Hájek, Michal
last_name: Hájek
- first_name: Miroslav
full_name: Cieslar, Miroslav
last_name: Cieslar
citation:
ama: Grydin O, Stolbchenko M, Schaper M, et al. New Twin-Roll Cast Al-Li Based Alloys
for High-Strength Applications. Metals. 2020;10(8). doi:10.3390/met10080987
apa: Grydin, O., Stolbchenko, M., Schaper, M., Belejová, S., Králík, R., Bajtošová,
L., Křivská, B., Hájek, M., & Cieslar, M. (2020). New Twin-Roll Cast Al-Li
Based Alloys for High-Strength Applications. Metals, 10(8), Article
987. https://doi.org/10.3390/met10080987
bibtex: '@article{Grydin_Stolbchenko_Schaper_Belejová_Králík_Bajtošová_Křivská_Hájek_Cieslar_2020,
title={New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications},
volume={10}, DOI={10.3390/met10080987},
number={8987}, journal={Metals}, author={Grydin, Olexandr and Stolbchenko, Mykhailo
and Schaper, Mirko and Belejová, Sára and Králík, Rostislav and Bajtošová, Lucia
and Křivská, Barbora and Hájek, Michal and Cieslar, Miroslav}, year={2020} }'
chicago: Grydin, Olexandr, Mykhailo Stolbchenko, Mirko Schaper, Sára Belejová, Rostislav
Králík, Lucia Bajtošová, Barbora Křivská, Michal Hájek, and Miroslav Cieslar.
“New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications.” Metals
10, no. 8 (2020). https://doi.org/10.3390/met10080987.
ieee: 'O. Grydin et al., “New Twin-Roll Cast Al-Li Based Alloys for High-Strength
Applications,” Metals, vol. 10, no. 8, Art. no. 987, 2020, doi: 10.3390/met10080987.'
mla: Grydin, Olexandr, et al. “New Twin-Roll Cast Al-Li Based Alloys for High-Strength
Applications.” Metals, vol. 10, no. 8, 987, 2020, doi:10.3390/met10080987.
short: O. Grydin, M. Stolbchenko, M. Schaper, S. Belejová, R. Králík, L. Bajtošová,
B. Křivská, M. Hájek, M. Cieslar, Metals 10 (2020).
date_created: 2021-09-16T16:24:50Z
date_updated: 2023-06-01T14:30:52Z
department:
- _id: '158'
doi: 10.3390/met10080987
intvolume: ' 10'
issue: '8'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2075-4701/10/8/987/htm
oa: '1'
publication: Metals
publication_identifier:
issn:
- 2075-4701
publication_status: published
quality_controlled: '1'
status: public
title: New Twin-Roll Cast Al-Li Based Alloys for High-Strength Applications
type: journal_article
user_id: '43720'
volume: 10
year: '2020'
...
---
_id: '24100'
abstract:
- lang: eng
text: Zinc oxide (ZnO) hollow spheres with defined morphology and micro-/nanostructure
are prepared by a hydrothermal synthesis approach. The materials possess fine-leaved
structures at their particle surface (nanowall hollow micro spheres). Morphology
control is achieved by citric acid used as an additive in variable relative quantities
during the synthesis. The structure formation is studied by various time-dependent
ex situ methods, such as scanning electron microscopy, x-ray diffraction, and
Raman spectroscopy. The fine-leaved surface structure is characterized by high-resolution
transmission electron microscopy techniques (HRTEM, STEM), using a high-angle
annular dark field detector, as well as by differential phase contrast analysis.
In-depth structural characterization of the nanowalls by drop-by-drop ex situ
FE-SEM analysis provides insight into possible structure formation mechanisms.
Further investigation addresses the thermal stability of the particle morphology
and the enhancement of the surface-to-volume ratio by heat treatment (examined
by N2 physisorption).
article_type: original
author:
- first_name: Katja
full_name: Engelkemeier, Katja
id: '21743'
last_name: Engelkemeier
- first_name: Jörg
full_name: Lindner, Jörg
id: '20797'
last_name: Lindner
- first_name: Julius
full_name: Bürger, Julius
id: '46952'
last_name: Bürger
- first_name: Kathrin
full_name: Vaupel, Kathrin
last_name: Vaupel
- first_name: Marc
full_name: Hartmann, Marc
last_name: Hartmann
- first_name: Michael
full_name: Tiemann, Michael
id: '23547'
last_name: Tiemann
orcid: 0000-0003-1711-2722
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Engelkemeier K, Lindner J, Bürger J, et al. Nano-architectural complexity of
zinc oxide nanowall hollow microspheres and their structural properties. Nanotechnology.
2020;31:095701. doi:10.1088/1361-6528/ab55bc
apa: Engelkemeier, K., Lindner, J., Bürger, J., Vaupel, K., Hartmann, M., Tiemann,
M., Hoyer, K.-P., & Schaper, M. (2020). Nano-architectural complexity of zinc
oxide nanowall hollow microspheres and their structural properties. Nanotechnology,
31, 095701. https://doi.org/10.1088/1361-6528/ab55bc
bibtex: '@article{Engelkemeier_Lindner_Bürger_Vaupel_Hartmann_Tiemann_Hoyer_Schaper_2020,
title={Nano-architectural complexity of zinc oxide nanowall hollow microspheres
and their structural properties}, volume={31}, DOI={10.1088/1361-6528/ab55bc},
journal={Nanotechnology}, author={Engelkemeier, Katja and Lindner, Jörg and Bürger,
Julius and Vaupel, Kathrin and Hartmann, Marc and Tiemann, Michael and Hoyer,
Kay-Peter and Schaper, Mirko}, year={2020}, pages={095701} }'
chicago: 'Engelkemeier, Katja, Jörg Lindner, Julius Bürger, Kathrin Vaupel, Marc
Hartmann, Michael Tiemann, Kay-Peter Hoyer, and Mirko Schaper. “Nano-Architectural
Complexity of Zinc Oxide Nanowall Hollow Microspheres and Their Structural Properties.”
Nanotechnology 31 (2020): 095701. https://doi.org/10.1088/1361-6528/ab55bc.'
ieee: 'K. Engelkemeier et al., “Nano-architectural complexity of zinc oxide
nanowall hollow microspheres and their structural properties,” Nanotechnology,
vol. 31, p. 095701, 2020, doi: 10.1088/1361-6528/ab55bc.'
mla: Engelkemeier, Katja, et al. “Nano-Architectural Complexity of Zinc Oxide Nanowall
Hollow Microspheres and Their Structural Properties.” Nanotechnology, vol.
31, 2020, p. 095701, doi:10.1088/1361-6528/ab55bc.
short: K. Engelkemeier, J. Lindner, J. Bürger, K. Vaupel, M. Hartmann, M. Tiemann,
K.-P. Hoyer, M. Schaper, Nanotechnology 31 (2020) 095701.
date_created: 2021-09-10T06:49:55Z
date_updated: 2023-06-01T14:29:58Z
department:
- _id: '9'
- _id: '158'
- _id: '301'
- _id: '286'
- _id: '35'
- _id: '307'
- _id: '2'
doi: 10.1088/1361-6528/ab55bc
intvolume: ' 31'
language:
- iso: eng
page: '095701'
publication: Nanotechnology
publication_identifier:
issn:
- 0957-4484
- 1361-6528
publication_status: published
quality_controlled: '1'
status: public
title: Nano-architectural complexity of zinc oxide nanowall hollow microspheres and
their structural properties
type: journal_article
user_id: '43720'
volume: 31
year: '2020'
...
---
_id: '24572'
abstract:
- lang: eng
text: ' This experiment studied the strain parameters of rolling an aluminum
matrix when wire netting is inserted between aluminum layers. During the experiment,
two types of stainless steel fabric netting oriented parallel and diagonal to
the rolling axis were placed between two aluminum strips and rolled. Multiple
rolling processes were performed in which the temperature and pressure on the
material were varied to produce bonding of matrix layers. During the study, the
following main investigations were made: strain on areas of longitudinal and transverse
cross sections of the composite was measured; stretching and ovalization of net
wiring and changes in the net cell angles were determined; mechanical properties
of composites along the rolling direction were tested. The main contradiction
resulting from this experiment was as follows: the contact pressure required for
the bonding of aluminum layers produces extreme tensile strain on the inserted
net wires, reducing the mechanical properties of the reinforcing net and thus
reducing properties of the entire composite. Optimal results in the longitudinal
tension tests were achieved by using strips with diagonally oriented net-reinforcement.
'
author:
- first_name: Mykhailo
full_name: Stolbchenko, Mykhailo
last_name: Stolbchenko
- first_name: Hanna
full_name: Makeieva, Hanna
last_name: Makeieva
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Yaroslav
full_name: Frolov, Yaroslav
last_name: Frolov
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Stolbchenko M, Makeieva H, Grydin O, Frolov Y, Schaper M. Strain parameters
at hot rolling of aluminum strips reinforced with steel netting. Journal of
Sandwich Structures & Materials. 2020;22(6):2009-2029. doi:10.1177/1099636218792539
apa: Stolbchenko, M., Makeieva, H., Grydin, O., Frolov, Y., & Schaper, M. (2020).
Strain parameters at hot rolling of aluminum strips reinforced with steel netting.
Journal of Sandwich Structures & Materials, 22(6), 2009–2029.
https://doi.org/10.1177/1099636218792539
bibtex: '@article{Stolbchenko_Makeieva_Grydin_Frolov_Schaper_2020, title={Strain
parameters at hot rolling of aluminum strips reinforced with steel netting}, volume={22},
DOI={10.1177/1099636218792539},
number={6}, journal={Journal of Sandwich Structures & Materials}, author={Stolbchenko,
Mykhailo and Makeieva, Hanna and Grydin, Olexandr and Frolov, Yaroslav and Schaper,
Mirko}, year={2020}, pages={2009–2029} }'
chicago: 'Stolbchenko, Mykhailo, Hanna Makeieva, Olexandr Grydin, Yaroslav Frolov,
and Mirko Schaper. “Strain Parameters at Hot Rolling of Aluminum Strips Reinforced
with Steel Netting.” Journal of Sandwich Structures & Materials 22,
no. 6 (2020): 2009–29. https://doi.org/10.1177/1099636218792539.'
ieee: 'M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, and M. Schaper, “Strain
parameters at hot rolling of aluminum strips reinforced with steel netting,” Journal
of Sandwich Structures & Materials, vol. 22, no. 6, pp. 2009–2029, 2020,
doi: 10.1177/1099636218792539.'
mla: Stolbchenko, Mykhailo, et al. “Strain Parameters at Hot Rolling of Aluminum
Strips Reinforced with Steel Netting.” Journal of Sandwich Structures &
Materials, vol. 22, no. 6, 2020, pp. 2009–29, doi:10.1177/1099636218792539.
short: M. Stolbchenko, H. Makeieva, O. Grydin, Y. Frolov, M. Schaper, Journal of
Sandwich Structures & Materials 22 (2020) 2009–2029.
date_created: 2021-09-16T16:23:44Z
date_updated: 2023-06-01T14:30:38Z
department:
- _id: '158'
doi: 10.1177/1099636218792539
intvolume: ' 22'
issue: '6'
language:
- iso: eng
page: 2009-2029
publication: Journal of Sandwich Structures & Materials
publication_identifier:
issn:
- 1099-6362
- 1530-7972
publication_status: published
quality_controlled: '1'
status: public
title: Strain parameters at hot rolling of aluminum strips reinforced with steel netting
type: journal_article
user_id: '43720'
volume: 22
year: '2020'
...
---
_id: '41520'
article_number: '139597'
author:
- first_name: Haoran
full_name: Wu, Haoran
last_name: Wu
- first_name: T.
full_name: Bill, T.
last_name: Bill
- first_name: Z.J.
full_name: Teng, Z.J.
last_name: Teng
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Peter
full_name: Starke, Peter
last_name: Starke
citation:
ama: 'Wu H, Bill T, Teng ZJ, et al. Characterization of the fatigue behaviour for
SAE 1045 steel without and with load-free sequences based on non-destructive,
X-ray diffraction and transmission electron microscopic investigations. Materials
Science and Engineering: A. 2020;794. doi:10.1016/j.msea.2020.139597'
apa: 'Wu, H., Bill, T., Teng, Z. J., Pramanik, S., Hoyer, K.-P., Schaper, M., &
Starke, P. (2020). Characterization of the fatigue behaviour for SAE 1045 steel
without and with load-free sequences based on non-destructive, X-ray diffraction
and transmission electron microscopic investigations. Materials Science and
Engineering: A, 794, Article 139597. https://doi.org/10.1016/j.msea.2020.139597'
bibtex: '@article{Wu_Bill_Teng_Pramanik_Hoyer_Schaper_Starke_2020, title={Characterization
of the fatigue behaviour for SAE 1045 steel without and with load-free sequences
based on non-destructive, X-ray diffraction and transmission electron microscopic
investigations}, volume={794}, DOI={10.1016/j.msea.2020.139597},
number={139597}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Wu, Haoran and Bill, T. and Teng, Z.J. and Pramanik, Sudipta and
Hoyer, Kay-Peter and Schaper, Mirko and Starke, Peter}, year={2020} }'
chicago: 'Wu, Haoran, T. Bill, Z.J. Teng, Sudipta Pramanik, Kay-Peter Hoyer, Mirko
Schaper, and Peter Starke. “Characterization of the Fatigue Behaviour for SAE
1045 Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray
Diffraction and Transmission Electron Microscopic Investigations.” Materials
Science and Engineering: A 794 (2020). https://doi.org/10.1016/j.msea.2020.139597.'
ieee: 'H. Wu et al., “Characterization of the fatigue behaviour for SAE 1045
steel without and with load-free sequences based on non-destructive, X-ray diffraction
and transmission electron microscopic investigations,” Materials Science and
Engineering: A, vol. 794, Art. no. 139597, 2020, doi: 10.1016/j.msea.2020.139597.'
mla: 'Wu, Haoran, et al. “Characterization of the Fatigue Behaviour for SAE 1045
Steel without and with Load-Free Sequences Based on Non-Destructive, X-Ray Diffraction
and Transmission Electron Microscopic Investigations.” Materials Science and
Engineering: A, vol. 794, 139597, Elsevier BV, 2020, doi:10.1016/j.msea.2020.139597.'
short: 'H. Wu, T. Bill, Z.J. Teng, S. Pramanik, K.-P. Hoyer, M. Schaper, P. Starke,
Materials Science and Engineering: A 794 (2020).'
date_created: 2023-02-02T14:42:11Z
date_updated: 2023-06-01T14:29:23Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.msea.2020.139597
intvolume: ' 794'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Characterization of the fatigue behaviour for SAE 1045 steel without and with
load-free sequences based on non-destructive, X-ray diffraction and transmission
electron microscopic investigations
type: journal_article
user_id: '43720'
volume: 794
year: '2020'
...
---
_id: '41521'
article_number: '125748'
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Nelson Filipe
full_name: Lopes Dias, Nelson Filipe
last_name: Lopes Dias
- first_name: Dominic
full_name: Stangier, Dominic
last_name: Stangier
- first_name: Leif
full_name: Hagen, Leif
last_name: Hagen
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Tillmann W, Lopes Dias NF, Stangier D, et al. Tribo-mechanical properties and
adhesion behavior of DLC coatings sputtered onto 36NiCrMo16 produced by selective
laser melting. Surface and Coatings Technology. 2020;394. doi:10.1016/j.surfcoat.2020.125748
apa: Tillmann, W., Lopes Dias, N. F., Stangier, D., Hagen, L., Schaper, M., Hengsbach,
F., & Hoyer, K.-P. (2020). Tribo-mechanical properties and adhesion behavior
of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting.
Surface and Coatings Technology, 394, Article 125748. https://doi.org/10.1016/j.surfcoat.2020.125748
bibtex: '@article{Tillmann_Lopes Dias_Stangier_Hagen_Schaper_Hengsbach_Hoyer_2020,
title={Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered
onto 36NiCrMo16 produced by selective laser melting}, volume={394}, DOI={10.1016/j.surfcoat.2020.125748},
number={125748}, journal={Surface and Coatings Technology}, publisher={Elsevier
BV}, author={Tillmann, Wolfgang and Lopes Dias, Nelson Filipe and Stangier, Dominic
and Hagen, Leif and Schaper, Mirko and Hengsbach, Florian and Hoyer, Kay-Peter},
year={2020} }'
chicago: Tillmann, Wolfgang, Nelson Filipe Lopes Dias, Dominic Stangier, Leif Hagen,
Mirko Schaper, Florian Hengsbach, and Kay-Peter Hoyer. “Tribo-Mechanical Properties
and Adhesion Behavior of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective
Laser Melting.” Surface and Coatings Technology 394 (2020). https://doi.org/10.1016/j.surfcoat.2020.125748.
ieee: 'W. Tillmann et al., “Tribo-mechanical properties and adhesion behavior
of DLC coatings sputtered onto 36NiCrMo16 produced by selective laser melting,”
Surface and Coatings Technology, vol. 394, Art. no. 125748, 2020, doi:
10.1016/j.surfcoat.2020.125748.'
mla: Tillmann, Wolfgang, et al. “Tribo-Mechanical Properties and Adhesion Behavior
of DLC Coatings Sputtered onto 36NiCrMo16 Produced by Selective Laser Melting.”
Surface and Coatings Technology, vol. 394, 125748, Elsevier BV, 2020, doi:10.1016/j.surfcoat.2020.125748.
short: W. Tillmann, N.F. Lopes Dias, D. Stangier, L. Hagen, M. Schaper, F. Hengsbach,
K.-P. Hoyer, Surface and Coatings Technology 394 (2020).
date_created: 2023-02-02T14:43:02Z
date_updated: 2023-06-01T14:29:36Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.surfcoat.2020.125748
intvolume: ' 394'
keyword:
- Materials Chemistry
- Surfaces
- Coatings and Films
- Surfaces and Interfaces
- Condensed Matter Physics
- General Chemistry
language:
- iso: eng
publication: Surface and Coatings Technology
publication_identifier:
issn:
- 0257-8972
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Tribo-mechanical properties and adhesion behavior of DLC coatings sputtered
onto 36NiCrMo16 produced by selective laser melting
type: journal_article
user_id: '43720'
volume: 394
year: '2020'
...