---
_id: '63765'
abstract:
- lang: eng
text: Rubber-metal bushings (RMB) are critical components in multi-body systems,
such as vehicles and industrial machinery, due to their ability to enable relative
motion, dampen vibrations, and transmit forces. However, their nonlinear behavior
challenges accurate modeling. Traditional physics-based models often fail to balance
simplicity, accuracy, and computational efficiency. The growing availability of
experimental data offers opportunities to improve RMB modeling through hybrid
and data-driven approaches. This study evaluates physics-based, hybrid, and data-driven
methods based on predictive accuracy, modeling effort, and computational cost.
Hybrid approaches, combining machine learning techniques with physics-based models,
are investigated to leverage their complementary strengths. Results show that
hybrid methods enhance accuracy for simpler models with a modest increase in computational
time. This highlights their potential to simplify RMB modeling while balancing
accuracy and efficiency, offering insights for advancing multi-body system simulations.
Building on these insights, data-driven methods are explored for their ability
to provide surrogate models for dynamical systems without requiring expert knowledge.
Experiments reveal that while simple data-driven methods approximate system behavior
when data has low variance, they fail with trajectories of widely varying frequency
and amplitude.
author:
- first_name: Meike Claudia
full_name: Wohlleben, Meike Claudia
id: '43991'
last_name: Wohlleben
orcid: 0009-0009-9767-7168
- first_name: Jan
full_name: Schütte, Jan
id: '22109'
last_name: Schütte
orcid: 0000-0001-9025-9742
- first_name: Manuel Bastian
full_name: Berkemeier, Manuel Bastian
last_name: Berkemeier
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Sebastian
full_name: Peitz, Sebastian
last_name: Peitz
citation:
ama: Wohlleben MC, Schütte J, Berkemeier MB, Sextro W, Peitz S. Evaluating Physics-Based,
Hybrid, and Data-Driven Models for Rubber-Metal Bushings. Multibody System
Dynamics. Published online 2026:1–21. doi:10.1007/s11044-026-10146-9
apa: Wohlleben, M. C., Schütte, J., Berkemeier, M. B., Sextro, W., & Peitz,
S. (2026). Evaluating Physics-Based, Hybrid, and Data-Driven Models for Rubber-Metal
Bushings. Multibody System Dynamics, 1–21. https://doi.org/10.1007/s11044-026-10146-9
bibtex: '@article{Wohlleben_Schütte_Berkemeier_Sextro_Peitz_2026, title={Evaluating
Physics-Based, Hybrid, and Data-Driven Models for Rubber-Metal Bushings}, DOI={10.1007/s11044-026-10146-9},
journal={Multibody System Dynamics}, author={Wohlleben, Meike Claudia and Schütte,
Jan and Berkemeier, Manuel Bastian and Sextro, Walter and Peitz, Sebastian}, year={2026},
pages={1–21} }'
chicago: Wohlleben, Meike Claudia, Jan Schütte, Manuel Bastian Berkemeier, Walter
Sextro, and Sebastian Peitz. “Evaluating Physics-Based, Hybrid, and Data-Driven
Models for Rubber-Metal Bushings.” Multibody System Dynamics, 2026, 1–21.
https://doi.org/10.1007/s11044-026-10146-9.
ieee: 'M. C. Wohlleben, J. Schütte, M. B. Berkemeier, W. Sextro, and S. Peitz, “Evaluating
Physics-Based, Hybrid, and Data-Driven Models for Rubber-Metal Bushings,” Multibody
System Dynamics, pp. 1–21, 2026, doi: 10.1007/s11044-026-10146-9.'
mla: Wohlleben, Meike Claudia, et al. “Evaluating Physics-Based, Hybrid, and Data-Driven
Models for Rubber-Metal Bushings.” Multibody System Dynamics, 2026, pp.
1–21, doi:10.1007/s11044-026-10146-9.
short: M.C. Wohlleben, J. Schütte, M.B. Berkemeier, W. Sextro, S. Peitz, Multibody
System Dynamics (2026) 1–21.
date_created: 2026-01-27T15:51:55Z
date_updated: 2026-03-03T06:31:03Z
department:
- _id: '151'
doi: 10.1007/s11044-026-10146-9
language:
- iso: eng
page: 1–21
publication: Multibody System Dynamics
publication_identifier:
issn:
- 1384-5640
quality_controlled: '1'
status: public
title: Evaluating Physics-Based, Hybrid, and Data-Driven Models for Rubber-Metal Bushings
type: journal_article
user_id: '43991'
year: '2026'
...
---
_id: '64813'
abstract:
- lang: eng
text: This paper describes the development of a method concept for the mechanical
characterisation of cathodic electrodeposition (CED) coatings in the context of
adhesively bonded joints. The objective is to determine mechanical properties
of coating layer in order to incorporate its influence into numerical simulation
models for load-bearing adhesive joints. For this purpose, both single-lap joints
(SLJ) and modified thick adherend shear specimens (TASS) with defined CED coating
layers were produced and tested under quasi-static loading conditions. Additionally,
the deposition process was analysed in terms of coating thickness evolution as
a function of deposition time and applied voltage. The specimens were pre-cured
to reduce gas inclusions from evaporating solvents in the CED coating layer. The
pre-curing temperature was determined using DSC. The results indicate that the
modified TASS configuration is particularly suited for the reproducible evaluation
of the shear load-bearing capacity. In comparison to the SLJ, it favours the degassing
of solvents through the installation of grooves. Furthermore, it is demonstrated
that gas-induced defect zones originating from the electrochemical deposition
process significantly compromise joint performance. The experimental and process
methodology developed in this study enables isolated characterisation of the coating
layer and provides a solid foundation for simulation of coated adhesive joints.
author:
- first_name: Julia
full_name: Hofmann, Julia
id: '104312'
last_name: Hofmann
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Hofmann J, Teutenberg D, Meschut G. Method development for the mechanical characterisation
of cathodic electrodeposition coatings for numerical simulation of bonded joints.
The Journal of Adhesion. Published online 2026:1-16. doi:10.1080/00218464.2026.2621198
apa: Hofmann, J., Teutenberg, D., & Meschut, G. (2026). Method development for
the mechanical characterisation of cathodic electrodeposition coatings for numerical
simulation of bonded joints. The Journal of Adhesion, 1–16. https://doi.org/10.1080/00218464.2026.2621198
bibtex: '@article{Hofmann_Teutenberg_Meschut_2026, title={Method development for
the mechanical characterisation of cathodic electrodeposition coatings for numerical
simulation of bonded joints}, DOI={10.1080/00218464.2026.2621198},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Hofmann,
Julia and Teutenberg, Dominik and Meschut, Gerson}, year={2026}, pages={1–16}
}'
chicago: Hofmann, Julia, Dominik Teutenberg, and Gerson Meschut. “Method Development
for the Mechanical Characterisation of Cathodic Electrodeposition Coatings for
Numerical Simulation of Bonded Joints.” The Journal of Adhesion, 2026,
1–16. https://doi.org/10.1080/00218464.2026.2621198.
ieee: 'J. Hofmann, D. Teutenberg, and G. Meschut, “Method development for the mechanical
characterisation of cathodic electrodeposition coatings for numerical simulation
of bonded joints,” The Journal of Adhesion, pp. 1–16, 2026, doi: 10.1080/00218464.2026.2621198.'
mla: Hofmann, Julia, et al. “Method Development for the Mechanical Characterisation
of Cathodic Electrodeposition Coatings for Numerical Simulation of Bonded Joints.”
The Journal of Adhesion, Informa UK Limited, 2026, pp. 1–16, doi:10.1080/00218464.2026.2621198.
short: J. Hofmann, D. Teutenberg, G. Meschut, The Journal of Adhesion (2026) 1–16.
date_created: 2026-03-03T08:38:13Z
date_updated: 2026-03-03T08:55:16Z
department:
- _id: '157'
doi: 10.1080/00218464.2026.2621198
language:
- iso: eng
page: 1-16
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Method development for the mechanical characterisation of cathodic electrodeposition
coatings for numerical simulation of bonded joints
type: journal_article
user_id: '104312'
year: '2026'
...
---
_id: '64815'
author:
- first_name: Julia
full_name: Hofmann, Julia
id: '104312'
last_name: Hofmann
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Paul
full_name: Schulz, Paul
last_name: Schulz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Hofmann J, Teutenberg D, Meschut G, Schulz P, Gude M. Entwicklung eines methodischen
Ansatzes zur Gewährleistung der anforderungsgerechten Klebbarkeit von rezyklatbasierten
Kunststoffen in der Kreislaufwirtschaft. In: DECHEMA, ed. 26. Kolloquium: Gemeinsame
Forschung in Der Klebtechnik. ; 2026.'
apa: 'Hofmann, J., Teutenberg, D., Meschut, G., Schulz, P., & Gude, M. (2026).
Entwicklung eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten
Klebbarkeit von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft. In
DECHEMA (Ed.), 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Hofmann_Teutenberg_Meschut_Schulz_Gude_2026, title={Entwicklung
eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten Klebbarkeit
von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft}, booktitle={26.
Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hofmann, Julia and
Teutenberg, Dominik and Meschut, Gerson and Schulz, Paul and Gude, Maik}, editor={DECHEMA},
year={2026} }'
chicago: 'Hofmann, Julia, Dominik Teutenberg, Gerson Meschut, Paul Schulz, and Maik
Gude. “Entwicklung Eines Methodischen Ansatzes Zur Gewährleistung Der Anforderungsgerechten
Klebbarkeit von Rezyklatbasierten Kunststoffen in Der Kreislaufwirtschaft.” In
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
2026.'
ieee: 'J. Hofmann, D. Teutenberg, G. Meschut, P. Schulz, and M. Gude, “Entwicklung
eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten Klebbarkeit
von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft,” in 26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, 2026.'
mla: 'Hofmann, Julia, et al. “Entwicklung Eines Methodischen Ansatzes Zur Gewährleistung
Der Anforderungsgerechten Klebbarkeit von Rezyklatbasierten Kunststoffen in Der
Kreislaufwirtschaft.” 26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik,
edited by DECHEMA, 2026.'
short: 'J. Hofmann, D. Teutenberg, G. Meschut, P. Schulz, M. Gude, in: DECHEMA (Ed.),
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-03-03T08:46:08Z
date_updated: 2026-03-03T08:55:19Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Entwicklung eines methodischen Ansatzes zur Gewährleistung der anforderungsgerechten
Klebbarkeit von rezyklatbasierten Kunststoffen in der Kreislaufwirtschaft
type: conference_abstract
user_id: '104312'
year: '2026'
...
---
_id: '64814'
author:
- first_name: Julia
full_name: Hofmann, Julia
id: '104312'
last_name: Hofmann
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Hofmann J, Teutenberg D, Meschut G. Methodenentwicklung zur numerischen Auslegung
von Klebverbindungen mit lackierten Fügeteilen. In: DECHEMA, ed. 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik. ; 2026.'
apa: 'Hofmann, J., Teutenberg, D., & Meschut, G. (2026). Methodenentwicklung
zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen. In DECHEMA
(Ed.), 26. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Hofmann_Teutenberg_Meschut_2026, title={Methodenentwicklung
zur numerischen Auslegung von Klebverbindungen mit lackierten Fügeteilen}, booktitle={26.
Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Hofmann, Julia and
Teutenberg, Dominik and Meschut, Gerson}, editor={DECHEMA}, year={2026} }'
chicago: 'Hofmann, Julia, Dominik Teutenberg, and Gerson Meschut. “Methodenentwicklung
Zur Numerischen Auslegung von Klebverbindungen Mit Lackierten Fügeteilen.” In
26. Kolloquium: Gemeinsame Forschung in Der Klebtechnik, edited by DECHEMA,
2026.'
ieee: 'J. Hofmann, D. Teutenberg, and G. Meschut, “Methodenentwicklung zur numerischen
Auslegung von Klebverbindungen mit lackierten Fügeteilen,” in 26. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, 2026.'
mla: 'Hofmann, Julia, et al. “Methodenentwicklung Zur Numerischen Auslegung von
Klebverbindungen Mit Lackierten Fügeteilen.” 26. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik, edited by DECHEMA, 2026.'
short: 'J. Hofmann, D. Teutenberg, G. Meschut, in: DECHEMA (Ed.), 26. Kolloquium:
Gemeinsame Forschung in Der Klebtechnik, 2026.'
conference:
end_date: 2026-02-11
name: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2026-02-10
corporate_editor:
- DECHEMA
date_created: 2026-03-03T08:43:25Z
date_updated: 2026-03-03T08:55:21Z
department:
- _id: '157'
language:
- iso: eng
publication: '26. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Methodenentwicklung zur numerischen Auslegung von Klebverbindungen mit lackierten
Fügeteilen
type: conference_abstract
user_id: '104312'
year: '2026'
...
---
_id: '64826'
author:
- first_name: Max
full_name: Kelber, Max
id: '70188'
last_name: Kelber
- first_name: Steffen
full_name: Brück, Steffen
last_name: Brück
- first_name: Nishant
full_name: Bhardwaj, Nishant
last_name: Bhardwaj
- first_name: Osarenren Kennedy
full_name: Aimiyekagbon, Osarenren Kennedy
id: '9557'
last_name: Aimiyekagbon
- first_name: Rolf
full_name: Naumann, Rolf
last_name: Naumann
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Kelber M, Brück S, Bhardwaj N, Aimiyekagbon OK, Naumann R, Sextro W. Methodik
zur Untersuchung der Fahrwerksparameter von Schienenfahrzeugen auf Basis optischer
Schwingungsmessungen an einer ortsfesten Messstelle. In: Hochschule für Technik
und Wirtschaft Dresden, Fakultät Maschinenbau, ed. Tagungsband Rad-Schiene-Tagung
2026. DVV Media Group GmbH - Eurailpress; 2026:206 – 208.'
apa: Kelber, M., Brück, S., Bhardwaj, N., Aimiyekagbon, O. K., Naumann, R., &
Sextro, W. (2026). Methodik zur Untersuchung der Fahrwerksparameter von Schienenfahrzeugen
auf Basis optischer Schwingungsmessungen an einer ortsfesten Messstelle. In Hochschule
für Technik und Wirtschaft Dresden, Fakultät Maschinenbau (Ed.), Tagungsband
Rad-Schiene-Tagung 2026 (pp. 206 – 208). DVV Media Group GmbH - Eurailpress.
bibtex: '@inproceedings{Kelber_Brück_Bhardwaj_Aimiyekagbon_Naumann_Sextro_2026,
place={Hamburg}, title={Methodik zur Untersuchung der Fahrwerksparameter von Schienenfahrzeugen
auf Basis optischer Schwingungsmessungen an einer ortsfesten Messstelle}, booktitle={Tagungsband
Rad-Schiene-Tagung 2026}, publisher={DVV Media Group GmbH - Eurailpress}, author={Kelber,
Max and Brück, Steffen and Bhardwaj, Nishant and Aimiyekagbon, Osarenren Kennedy
and Naumann, Rolf and Sextro, Walter}, editor={Hochschule für Technik und Wirtschaft
Dresden, Fakultät Maschinenbau}, year={2026}, pages={206 – 208} }'
chicago: 'Kelber, Max, Steffen Brück, Nishant Bhardwaj, Osarenren Kennedy Aimiyekagbon,
Rolf Naumann, and Walter Sextro. “Methodik zur Untersuchung der Fahrwerksparameter
von Schienenfahrzeugen auf Basis optischer Schwingungsmessungen an einer ortsfesten
Messstelle.” In Tagungsband Rad-Schiene-Tagung 2026, edited by Hochschule
für Technik und Wirtschaft Dresden, Fakultät Maschinenbau, 206 – 208. Hamburg:
DVV Media Group GmbH - Eurailpress, 2026.'
ieee: M. Kelber, S. Brück, N. Bhardwaj, O. K. Aimiyekagbon, R. Naumann, and W. Sextro,
“Methodik zur Untersuchung der Fahrwerksparameter von Schienenfahrzeugen auf Basis
optischer Schwingungsmessungen an einer ortsfesten Messstelle,” in Tagungsband
Rad-Schiene-Tagung 2026, Dresden, 2026, pp. 206 – 208.
mla: Kelber, Max, et al. “Methodik zur Untersuchung der Fahrwerksparameter von Schienenfahrzeugen
auf Basis optischer Schwingungsmessungen an einer ortsfesten Messstelle.” Tagungsband
Rad-Schiene-Tagung 2026, edited by Hochschule für Technik und Wirtschaft Dresden,
Fakultät Maschinenbau, DVV Media Group GmbH - Eurailpress, 2026, pp. 206 – 208.
short: 'M. Kelber, S. Brück, N. Bhardwaj, O.K. Aimiyekagbon, R. Naumann, W. Sextro,
in: Hochschule für Technik und Wirtschaft Dresden, Fakultät Maschinenbau (Ed.),
Tagungsband Rad-Schiene-Tagung 2026, DVV Media Group GmbH - Eurailpress, Hamburg,
2026, pp. 206 – 208.'
conference:
end_date: 2026-03-06
location: Dresden
name: 21. Internationale Schienenfahrzeugtagung Dresden 4.-6. März 2026
start_date: 2026-03-04
corporate_editor:
- Hochschule für Technik und Wirtschaft Dresden, Fakultät Maschinenbau
date_created: 2026-03-04T10:26:27Z
date_updated: 2026-03-04T10:38:28Z
department:
- _id: '151'
language:
- iso: ger
page: 206 – 208
place: Hamburg
popular_science: '1'
project:
- _id: '1355'
name: enableATO – Automatisierter Bahnverkehr als Backbone für eine nachhaltige,
vernetzte Mobilität im ländlichen Raum
publication: Tagungsband Rad-Schiene-Tagung 2026
publication_identifier:
isbn:
- 978-3-96892-332-1
publication_status: published
publisher: DVV Media Group GmbH - Eurailpress
status: public
title: Methodik zur Untersuchung der Fahrwerksparameter von Schienenfahrzeugen auf
Basis optischer Schwingungsmessungen an einer ortsfesten Messstelle
type: conference
user_id: '70188'
year: '2026'
...
---
_id: '63665'
article_number: '104264'
author:
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Linda
full_name: Fröck, Linda
last_name: Fröck
- first_name: Christopher
full_name: Wald, Christopher
last_name: Wald
- first_name: Vanessa
full_name: Neßlinger, Vanessa
last_name: Neßlinger
- first_name: Karsten
full_name: Dobrindt-Tittmann, Karsten
last_name: Dobrindt-Tittmann
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Fynn
full_name: Neubert, Fynn
last_name: Neubert
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Christian
full_name: Mathiszik, Christian
last_name: Mathiszik
- first_name: Hans Christian
full_name: Schmale, Hans Christian
last_name: Schmale
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
citation:
ama: 'Gude M, Meschut G, Flügge W, et al. Corrosion of adhesively bonded alloys
in maritime environments: A review. International Journal of Adhesion and Adhesives.
2026;147. doi:10.1016/j.ijadhadh.2026.104264'
apa: 'Gude, M., Meschut, G., Flügge, W., Fröck, L., Wald, C., Neßlinger, V., Dobrindt-Tittmann,
K., Troschitz, J., Neubert, F., Hofmann, M., Ostwald, R., Mathiszik, C., Schmale,
H. C., Wallmersperger, T., & Grundmeier, G. (2026). Corrosion of adhesively
bonded alloys in maritime environments: A review. International Journal of
Adhesion and Adhesives, 147, Article 104264. https://doi.org/10.1016/j.ijadhadh.2026.104264'
bibtex: '@article{Gude_Meschut_Flügge_Fröck_Wald_Neßlinger_Dobrindt-Tittmann_Troschitz_Neubert_Hofmann_et
al._2026, title={Corrosion of adhesively bonded alloys in maritime environments:
A review}, volume={147}, DOI={10.1016/j.ijadhadh.2026.104264},
number={104264}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Gude, Maik and Meschut, Gerson and Flügge, Wilko and Fröck, Linda
and Wald, Christopher and Neßlinger, Vanessa and Dobrindt-Tittmann, Karsten and
Troschitz, Juliane and Neubert, Fynn and Hofmann, Martin and et al.}, year={2026}
}'
chicago: 'Gude, Maik, Gerson Meschut, Wilko Flügge, Linda Fröck, Christopher Wald,
Vanessa Neßlinger, Karsten Dobrindt-Tittmann, et al. “Corrosion of Adhesively
Bonded Alloys in Maritime Environments: A Review.” International Journal of
Adhesion and Adhesives 147 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104264.'
ieee: 'M. Gude et al., “Corrosion of adhesively bonded alloys in maritime
environments: A review,” International Journal of Adhesion and Adhesives,
vol. 147, Art. no. 104264, 2026, doi: 10.1016/j.ijadhadh.2026.104264.'
mla: 'Gude, Maik, et al. “Corrosion of Adhesively Bonded Alloys in Maritime Environments:
A Review.” International Journal of Adhesion and Adhesives, vol. 147, 104264,
Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104264.'
short: M. Gude, G. Meschut, W. Flügge, L. Fröck, C. Wald, V. Neßlinger, K. Dobrindt-Tittmann,
J. Troschitz, F. Neubert, M. Hofmann, R. Ostwald, C. Mathiszik, H.C. Schmale,
T. Wallmersperger, G. Grundmeier, International Journal of Adhesion and Adhesives
147 (2026).
date_created: 2026-01-20T09:06:03Z
date_updated: 2026-03-04T11:32:09Z
department:
- _id: '9'
- _id: '952'
- _id: '321'
doi: 10.1016/j.ijadhadh.2026.104264
intvolume: ' 147'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Corrosion of adhesively bonded alloys in maritime environments: A review'
type: journal_article
user_id: '85414'
volume: 147
year: '2026'
...
---
_id: '63391'
abstract:
- lang: eng
text: "This study addresses the challenge of insufficient weld penetration in the
outer thin low-carbon steel during\r\nresistance spot welding of three-layer dissimilar
stack-ups containing advanced high-strength steels. To overcome\r\nthermal imbalance
constraints, an innovative strategy leveraging plastic shell containment is proposed
to elevate\r\nthe expulsion-free heat input threshold. By applying a combined
preheating and ramping current profile, a coordinated “shell-first, nugget-second”
sequence is achieved. This mechanism creates a solid-state barrier prior to\r\nrapid
fusion, effectively preventing expulsion. Experimental results demonstrate that
while the reference\r\nconstant-current schedule fails to maintain a process window
under a 2 mm initial gap (IG) disturbance, the\r\nproposed strategy significantly
enhances process stability. It increases the maximum expulsion-free heat input
by\r\n24 % (to 6338 J) under normal conditions and by 77 % (to 6482 J) under the
IG condition. Crucially, the\r\nincreased heat input drives nugget growth across
all interfaces, achieving a penetration depth of 0.38 mm (48 %\r\npenetration
ratio) in the low-carbon steel sheet under the gap condition. These findings validate
the strategy’s\r\neffectiveness in ensuring weld quality and robustness, which
is further confirmed by its transferability to a lowerresistivity DX54D cover
sheet."
article_type: original
author:
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Leonhard
full_name: Männer, Leonhard
id: '51255'
last_name: Männer
- first_name: Zhuoqun
full_name: Wang, Zhuoqun
last_name: Wang
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: Yannic
full_name: Böhm, Yannic
id: '84119'
last_name: Böhm
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Yang K, Männer L, Wang Z, et al. Process window expansion with transferable
applicability in three-layer dissimilar steel resistance spot welding via expulsion
prevention. Journal of Manufacturing Processes. 2026;157(Special issue
entitled: ‘Trends on spot joining’ published in Journal of Manufacturing Processes.):984-1000.
doi:10.1016/j.jmapro.2025.12.036'
apa: 'Yang, K., Männer, L., Wang, Z., Olfert, V., Böhm, Y., Hein, D., & Meschut,
G. (2026). Process window expansion with transferable applicability in three-layer
dissimilar steel resistance spot welding via expulsion prevention. Journal
of Manufacturing Processes, 157(Special issue entitled: ‘Trends on
spot joining’ published in Journal of Manufacturing Processes.), 984–1000. https://doi.org/10.1016/j.jmapro.2025.12.036'
bibtex: '@article{Yang_Männer_Wang_Olfert_Böhm_Hein_Meschut_2026, title={Process
window expansion with transferable applicability in three-layer dissimilar steel
resistance spot welding via expulsion prevention}, volume={157}, DOI={10.1016/j.jmapro.2025.12.036},
number={Special issue entitled: ‘Trends on spot joining’ published in Journal
of Manufacturing Processes.}, journal={Journal of Manufacturing Processes}, publisher={Elsevier
BV}, author={Yang, Keke and Männer, Leonhard and Wang, Zhuoqun and Olfert, Viktoria
and Böhm, Yannic and Hein, David and Meschut, Gerson}, year={2026}, pages={984–1000}
}'
chicago: 'Yang, Keke, Leonhard Männer, Zhuoqun Wang, Viktoria Olfert, Yannic Böhm,
David Hein, and Gerson Meschut. “Process Window Expansion with Transferable Applicability
in Three-Layer Dissimilar Steel Resistance Spot Welding via Expulsion Prevention.”
Journal of Manufacturing Processes 157, no. Special issue entitled: ‘Trends
on spot joining’ published in Journal of Manufacturing Processes. (2026): 984–1000.
https://doi.org/10.1016/j.jmapro.2025.12.036.'
ieee: 'K. Yang et al., “Process window expansion with transferable applicability
in three-layer dissimilar steel resistance spot welding via expulsion prevention,”
Journal of Manufacturing Processes, vol. 157, no. Special issue entitled:
‘Trends on spot joining’ published in Journal of Manufacturing Processes., pp.
984–1000, 2026, doi: 10.1016/j.jmapro.2025.12.036.'
mla: 'Yang, Keke, et al. “Process Window Expansion with Transferable Applicability
in Three-Layer Dissimilar Steel Resistance Spot Welding via Expulsion Prevention.”
Journal of Manufacturing Processes, vol. 157, no. Special issue entitled:
‘Trends on spot joining’ published in Journal of Manufacturing Processes., Elsevier
BV, 2026, pp. 984–1000, doi:10.1016/j.jmapro.2025.12.036.'
short: K. Yang, L. Männer, Z. Wang, V. Olfert, Y. Böhm, D. Hein, G. Meschut, Journal
of Manufacturing Processes 157 (2026) 984–1000.
date_created: 2025-12-22T08:20:34Z
date_updated: 2025-12-22T08:24:19Z
ddc:
- '620'
department:
- _id: '157'
doi: 10.1016/j.jmapro.2025.12.036
file:
- access_level: closed
content_type: application/pdf
creator: kekeyang
date_created: 2025-12-22T08:21:51Z
date_updated: 2025-12-22T08:21:51Z
file_id: '63392'
file_name: 1-s2.0-S1526612525013568-main.pdf
file_size: 21431773
relation: main_file
success: 1
file_date_updated: 2025-12-22T08:21:51Z
has_accepted_license: '1'
intvolume: ' 157'
issue: 'Special issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes.'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1016/j.jmapro.2025.12.036
oa: '1'
page: 984-1000
publication: Journal of Manufacturing Processes
publication_identifier:
issn:
- 1526-6125
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Process window expansion with transferable applicability in three-layer dissimilar
steel resistance spot welding via expulsion prevention
type: journal_article
user_id: '65085'
volume: 157
year: '2026'
...
---
_id: '63418'
abstract:
- lang: eng
text: Manufacturing tolerances have a measurable influence on the structural integrity
of self-piercing riveted (SPR) joints in automotive applications, yet their quantitative
impact on load-bearing behavior remains insufficiently resolved. This study establishes
a validated hierarchical methodology to predict tolerance-dependent failure behavior
of SPR joints, progressing from coupon to sub-component scale through an integrated
experimental–numerical approach. Five critical manufacturing tolerances, including
rivet length (±0.5 mm), rivet head position (±0.3 mm), orthogonality deviation
(2.8° and 5°), lateral offset (up to 1.2 mm), and flange overlap reduction (up
to 7.5 mm), were investigated. Steel–steel joints exhibited a higher sensitivity
to tolerances by a factor of 2–3 compared to steel–aluminum joints. A unified
effective rivet length concept was developed to consolidate the geometric effects
of all tolerances into a single physically meaningful parameter, enabling load-bearing
capacity prediction with R2 > 0.95 across all evaluated loading directions. The
sub-component validation employing T-joint specimens indicates a 2–3 fold amplification
of tolerance effects at critical structural regions, providing experimental evidence
for the hierarchical scaling principle. The methodology was implemented in a tolerance-dependent
CONSTRAINED_SPR3 formulation, providing >99 % computational efficiency improvement
while maintaining a deviation in maximum force prediction within ±7 %. This framework
enables the physically consistent representation of manufacturing variation within
large-scale simulations and establishes a transferable basis for tolerance-resilient
virtual vehicle development.
article_type: original
author:
- first_name: Viktoria
full_name: Olfert, Viktoria
id: '5974'
last_name: Olfert
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Philip
full_name: Rochel, Philip
last_name: Rochel
- first_name: Philipp
full_name: Bähr, Philipp
last_name: Bähr
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Olfert V, Yang K, Rochel P, et al. Predictive modeling of tolerance-dependent
failure behavior of self-pierce riveted joints: From coupon-level tests to sub-component
validation. Journal of Manufacturing Processes. 2026;157(Special issue
entitled: ‘Trends on spot joining’ published in Journal of Manufacturing Processes.):1250-1273.
doi:10.1016/j.jmapro.2025.12.058'
apa: 'Olfert, V., Yang, K., Rochel, P., Bähr, P., Hein, D., Sommer, S., & Meschut,
G. (2026). Predictive modeling of tolerance-dependent failure behavior of self-pierce
riveted joints: From coupon-level tests to sub-component validation. Journal
of Manufacturing Processes, 157(Special issue entitled: ‘Trends on
spot joining’ published in Journal of Manufacturing Processes.), 1250–1273. https://doi.org/10.1016/j.jmapro.2025.12.058'
bibtex: '@article{Olfert_Yang_Rochel_Bähr_Hein_Sommer_Meschut_2026, title={Predictive
modeling of tolerance-dependent failure behavior of self-pierce riveted joints:
From coupon-level tests to sub-component validation}, volume={157}, DOI={10.1016/j.jmapro.2025.12.058},
number={Special issue entitled: ‘Trends on spot joining’ published in Journal
of Manufacturing Processes.}, journal={Journal of Manufacturing Processes}, publisher={Elsevier
BV}, author={Olfert, Viktoria and Yang, Keke and Rochel, Philip and Bähr, Philipp
and Hein, David and Sommer, Silke and Meschut, Gerson}, year={2026}, pages={1250–1273}
}'
chicago: 'Olfert, Viktoria, Keke Yang, Philip Rochel, Philipp Bähr, David Hein,
Silke Sommer, and Gerson Meschut. “Predictive Modeling of Tolerance-Dependent
Failure Behavior of Self-Pierce Riveted Joints: From Coupon-Level Tests to Sub-Component
Validation.” Journal of Manufacturing Processes 157, no. Special issue
entitled: ‘Trends on spot joining’ published in Journal of Manufacturing Processes.
(2026): 1250–73. https://doi.org/10.1016/j.jmapro.2025.12.058.'
ieee: 'V. Olfert et al., “Predictive modeling of tolerance-dependent failure
behavior of self-pierce riveted joints: From coupon-level tests to sub-component
validation,” Journal of Manufacturing Processes, vol. 157, no. Special
issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes., pp. 1250–1273, 2026, doi: 10.1016/j.jmapro.2025.12.058.'
mla: 'Olfert, Viktoria, et al. “Predictive Modeling of Tolerance-Dependent Failure
Behavior of Self-Pierce Riveted Joints: From Coupon-Level Tests to Sub-Component
Validation.” Journal of Manufacturing Processes, vol. 157, no. Special
issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes., Elsevier BV, 2026, pp. 1250–73, doi:10.1016/j.jmapro.2025.12.058.'
short: V. Olfert, K. Yang, P. Rochel, P. Bähr, D. Hein, S. Sommer, G. Meschut, Journal
of Manufacturing Processes 157 (2026) 1250–1273.
date_created: 2025-12-26T13:41:43Z
date_updated: 2025-12-26T14:06:38Z
ddc:
- '620'
department:
- _id: '157'
doi: 10.1016/j.jmapro.2025.12.058
file:
- access_level: closed
content_type: application/pdf
creator: kekeyang
date_created: 2025-12-26T13:42:22Z
date_updated: 2025-12-26T13:42:22Z
file_id: '63419'
file_name: 1-s2.0-S1526612525013787-main.pdf
file_size: 28796238
relation: main_file
success: 1
file_date_updated: 2025-12-26T13:42:22Z
has_accepted_license: '1'
intvolume: ' 157'
issue: 'Special issue entitled: ‘Trends on spot joining’ published in Journal of Manufacturing
Processes.'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S1526612525013787?via%3Dihub
oa: '1'
page: 1250-1273
publication: Journal of Manufacturing Processes
publication_identifier:
issn:
- 1526-6125
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Predictive modeling of tolerance-dependent failure behavior of self-pierce
riveted joints: From coupon-level tests to sub-component validation'
type: journal_article
user_id: '65085'
volume: 157
year: '2026'
...
---
_id: '64876'
abstract:
- lang: eng
text: "ABSTRACT\r\n This study
shows the applicability of ultrasonic sensors for measuring two‐phase layer heights
in sieve tray columns under dynamic operating conditions. Although these sensors
are known for their precision in stationary systems, their reliability under fluctuating
flow conditions has remained unclear. To validate their accuracy, ultrasonic measurements
were compared with both automated image analysis via a Python algorithm and manual
video evaluation. Results show that ultrasonic sensors maintain high precision
at moderate gas loads and with small hole diameters. Increased gas loads and turbulence,
however, reduced measurement accuracy due to signal scattering. The findings highlight
the potential of ultrasonic sensing for real‐time, noninvasive monitoring in dynamic
multiphase systems."
article_number: e70087
author:
- first_name: Niklas
full_name: Breuer, Niklas
last_name: Breuer
- first_name: Marcus
full_name: Grünewald, Marcus
last_name: Grünewald
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Breuer N, Grünewald M, Riese J. Application of Ultrasonic Sensors for Determining
the Height of Dynamic Two‐Phase Layers in Tray Columns. Chemie Ingenieur Technik.
Published online 2026. doi:10.1002/cite.70087
apa: Breuer, N., Grünewald, M., & Riese, J. (2026). Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns.
Chemie Ingenieur Technik, Article e70087. https://doi.org/10.1002/cite.70087
bibtex: '@article{Breuer_Grünewald_Riese_2026, title={Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns},
DOI={10.1002/cite.70087}, number={e70087},
journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Breuer, Niklas
and Grünewald, Marcus and Riese, Julia}, year={2026} }'
chicago: Breuer, Niklas, Marcus Grünewald, and Julia Riese. “Application of Ultrasonic
Sensors for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns.”
Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70087.
ieee: 'N. Breuer, M. Grünewald, and J. Riese, “Application of Ultrasonic Sensors
for Determining the Height of Dynamic Two‐Phase Layers in Tray Columns,” Chemie
Ingenieur Technik, Art. no. e70087, 2026, doi: 10.1002/cite.70087.'
mla: Breuer, Niklas, et al. “Application of Ultrasonic Sensors for Determining the
Height of Dynamic Two‐Phase Layers in Tray Columns.” Chemie Ingenieur Technik,
e70087, Wiley, 2026, doi:10.1002/cite.70087.
short: N. Breuer, M. Grünewald, J. Riese, Chemie Ingenieur Technik (2026).
date_created: 2026-03-10T15:01:19Z
date_updated: 2026-03-10T15:01:55Z
department:
- _id: '831'
doi: 10.1002/cite.70087
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Application of Ultrasonic Sensors for Determining the Height of Dynamic Two‐Phase
Layers in Tray Columns
type: journal_article
user_id: '101499'
year: '2026'
...
---
_id: '64656'
abstract:
- lang: eng
text: "ABSTRACT\r\n The filament
extension atomization is a promising process for spraying various materials with
the potential to produce narrow droplet size distributions. This study systematically
investigates the behavior of different fluids and suspensions in the process in
order to determine its application limits and identify optimal process parameters.
Particular attention was paid to the rheological properties, droplet size distributions,
and circularity of the particles produced. The results show that the rotational
speed of the rollers and the fluid loading are significant influencing parameters
for the resulting particle properties."
article_number: cite.70073
author:
- first_name: Moritz
full_name: Neukötter, Moritz
last_name: Neukötter
- first_name: Nick
full_name: Aulbur, Nick
last_name: Aulbur
- first_name: Julian
full_name: Neudorf, Julian
last_name: Neudorf
- first_name: Steffen
full_name: Jesinghausen, Steffen
last_name: Jesinghausen
- first_name: Hans‐Joachim
full_name: Schmid, Hans‐Joachim
last_name: Schmid
citation:
ama: Neukötter M, Aulbur N, Neudorf J, Jesinghausen S, Schmid H. The Filament Extension
Atomization Process for Powder Production of Elastic Fluids. Chemie Ingenieur
Technik. Published online 2026. doi:https://doi.org/10.1002/cite.70073
apa: Neukötter, M., Aulbur, N., Neudorf, J., Jesinghausen, S., & Schmid, H.
(2026). The Filament Extension Atomization Process for Powder Production of Elastic
Fluids. Chemie Ingenieur Technik, Article cite. 70073. https://doi.org/10.1002/cite.70073
bibtex: '@article{Neukötter_Aulbur_Neudorf_Jesinghausen_Schmid_2026, title={The
Filament Extension Atomization Process for Powder Production of Elastic Fluids},
DOI={https://doi.org/10.1002/cite.70073},
number={cite. 70073}, journal={Chemie Ingenieur Technik}, publisher={Wiley}, author={Neukötter,
Moritz and Aulbur, Nick and Neudorf, Julian and Jesinghausen, Steffen and Schmid,
Hans‐Joachim}, year={2026} }'
chicago: Neukötter, Moritz, Nick Aulbur, Julian Neudorf, Steffen Jesinghausen, and
Hans‐Joachim Schmid. “The Filament Extension Atomization Process for Powder Production
of Elastic Fluids.” Chemie Ingenieur Technik, 2026. https://doi.org/10.1002/cite.70073.
ieee: 'M. Neukötter, N. Aulbur, J. Neudorf, S. Jesinghausen, and H. Schmid, “The
Filament Extension Atomization Process for Powder Production of Elastic Fluids,”
Chemie Ingenieur Technik, Art. no. cite. 70073, 2026, doi: https://doi.org/10.1002/cite.70073.'
mla: Neukötter, Moritz, et al. “The Filament Extension Atomization Process for Powder
Production of Elastic Fluids.” Chemie Ingenieur Technik, cite. 70073, Wiley,
2026, doi:https://doi.org/10.1002/cite.70073.
short: M. Neukötter, N. Aulbur, J. Neudorf, S. Jesinghausen, H. Schmid, Chemie Ingenieur
Technik (2026).
date_created: 2026-02-26T08:41:01Z
date_updated: 2026-03-11T14:45:02Z
ddc:
- '620'
department:
- _id: '9'
- _id: '150'
doi: https://doi.org/10.1002/cite.70073
has_accepted_license: '1'
language:
- iso: eng
publication: Chemie Ingenieur Technik
publication_identifier:
issn:
- 0009-286X
- 1522-2640
publication_status: published
publisher: Wiley
status: public
title: The Filament Extension Atomization Process for Powder Production of Elastic
Fluids
type: journal_article
user_id: '45530'
year: '2026'
...
---
_id: '64916'
abstract:
- lang: eng
text: The joining of dissimilar materials, such as steel and aluminum, entails significant
challenges during thermal curing processes due to differing coefficients of thermal
expansion. This study addresses the formation of “viscous fingering” instabilities
in structural adhesive joints, which are induced by thermally driven relative
displacements during the liquid phase of the adhesive. Using a component-like
specimen “bridge specimen,” the dependency of this phenomenon on process temperature
and structural stiffness (rivet distance) was characterized. Experimental results
reveal that while the relative displacement scales cubically with the free buckling
length, the resulting adhesive area reduction follows an exponential trend, leading
to a loss of effective bond area of up to 79%, which significantly compromises
the joint strength in automotive applications. To predict these process-induced
defects, a thermo-chemo-viscoelastic-viscoplastic adhesive model implemented in
LS-DYNA was applied. The model combines curing kinetics, viscoelastic relaxation,
and pressure-dependent plasticity and features a geometric damage parameter (D)
that captures the adhesive area reduction caused by viscous fingering as an exponential
function of the accumulated normal strain in the liquid phase. This damage parameter,
calibrated on base-specimen level, was transferred to the component geometry.
The simulation demonstrated high predictive accuracy with a maximum deviation
of the adhesive area reduction of 3.1% compared to experimental data. This validates
the model’s capability to predict manufacturing-induced damage in complex hybrid
structures solely based on thermal boundary conditions.
article_type: original
author:
- first_name: Mohamad
full_name: Al Trjman, Mohamad
id: '65415'
last_name: Al Trjman
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julia
full_name: Riese, Julia
id: '101499'
last_name: Riese
orcid: 0000-0002-3053-0534
citation:
ama: Al Trjman M, Beule F, Teutenberg D, Meschut G, Riese J. Experimental characterization
and numerical analysis of the influence of the CED coating process on viscous
fingering formation in hybrid-jointed mixed structures. The Journal of Adhesion.
Published online 2026:1-24. doi:10.1080/00218464.2026.2644394
apa: Al Trjman, M., Beule, F., Teutenberg, D., Meschut, G., & Riese, J. (2026).
Experimental characterization and numerical analysis of the influence of the CED
coating process on viscous fingering formation in hybrid-jointed mixed structures.
The Journal of Adhesion, 1–24. https://doi.org/10.1080/00218464.2026.2644394
bibtex: '@article{Al Trjman_Beule_Teutenberg_Meschut_Riese_2026, title={Experimental
characterization and numerical analysis of the influence of the CED coating process
on viscous fingering formation in hybrid-jointed mixed structures}, DOI={10.1080/00218464.2026.2644394},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Al
Trjman, Mohamad and Beule, Felix and Teutenberg, Dominik and Meschut, Gerson and
Riese, Julia}, year={2026}, pages={1–24} }'
chicago: Al Trjman, Mohamad, Felix Beule, Dominik Teutenberg, Gerson Meschut, and
Julia Riese. “Experimental Characterization and Numerical Analysis of the Influence
of the CED Coating Process on Viscous Fingering Formation in Hybrid-Jointed Mixed
Structures.” The Journal of Adhesion, 2026, 1–24. https://doi.org/10.1080/00218464.2026.2644394.
ieee: 'M. Al Trjman, F. Beule, D. Teutenberg, G. Meschut, and J. Riese, “Experimental
characterization and numerical analysis of the influence of the CED coating process
on viscous fingering formation in hybrid-jointed mixed structures,” The Journal
of Adhesion, pp. 1–24, 2026, doi: 10.1080/00218464.2026.2644394.'
mla: Al Trjman, Mohamad, et al. “Experimental Characterization and Numerical Analysis
of the Influence of the CED Coating Process on Viscous Fingering Formation in
Hybrid-Jointed Mixed Structures.” The Journal of Adhesion, Informa UK Limited,
2026, pp. 1–24, doi:10.1080/00218464.2026.2644394.
short: M. Al Trjman, F. Beule, D. Teutenberg, G. Meschut, J. Riese, The Journal
of Adhesion (2026) 1–24.
date_created: 2026-03-14T18:43:41Z
date_updated: 2026-03-14T19:04:46Z
ddc:
- '620'
- '670'
- '660'
department:
- _id: '9'
doi: 10.1080/00218464.2026.2644394
file:
- access_level: closed
content_type: application/pdf
creator: mohamada
date_created: 2026-03-14T18:50:31Z
date_updated: 2026-03-14T18:50:31Z
file_id: '64917'
file_name: Experimental characterization and numerical analysis of the influence
of the CED coating process on viscous fingering formation in hybrid-jointed mixe.pdf
file_size: 14668789
relation: main_file
success: 1
file_date_updated: 2026-03-14T18:50:31Z
has_accepted_license: '1'
keyword:
- Adhesive area reduction
- CED coating process
- delta alpha problem
- epoxy structural adhesive
- influence of manufacture
- multi-material design
- numerical simulation (FEM)
- relative displacements
- viscous fingering (saffman-taylor-instability).
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 1-24
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
status: public
title: Experimental characterization and numerical analysis of the influence of the
CED coating process on viscous fingering formation in hybrid-jointed mixed structures
type: journal_article
user_id: '65415'
year: '2026'
...
---
_id: '64985'
abstract:
- lang: eng
text: Modern industrial development has necessitated a wide range of joining technologies.
Self-pierce riveting has become a prevalent technique for sheet metal assembly,
especially in automotive applications. Achieving proper joint geometry and adequate
load-bearing capacity depends on appropriate tool selection and precise process
control. Material properties and condition also play a significant role in process
performance. To accommodate the inevitable variations in component characteristics
during production, a robust and stable joining process is essential. The study
focuses on investigating the influence of preformed joining partners on the joining
process and the joint's load capacity. An EN AW-6014 in T4 condition, as well
as an HCT590X, are used as materials for this study. For this purpose, an exemplary
process chain consisting of the steps of performing, joining, and shear load testing
is studied. Each process step is implemented using an FE model to predict the
outcome of subsequent steps. For analysis of the influence of pre-strain, an optimisation
software is used to plan and execute variations of the process. These variations
are used to create a meta-model that can describe the relationships between pre-forming
and characteristic parameters of subsequent process steps. The resulting model
is validated by comparing simulation and experimental data. Finally, in a novel
approach, the robustness of the presented process chain is analyzed in terms of
a tolerable performance level for the joining partners.
article_number: '100391'
author:
- first_name: Jean-Patrick
full_name: Ludwig, Jean-Patrick
id: '76631'
last_name: Ludwig
- first_name: Emil
full_name: Tolke, Emil
last_name: Tolke
- first_name: Malte Christian
full_name: Schlichter, Malte Christian
id: '61977'
last_name: Schlichter
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Ludwig J-P, Tolke E, Schlichter MC, Bobbert M, Meschut G. Numerical analysis
of the robustness of self-pierce riveting with pre-formed joining partners. Journal
of Advanced Joining Processes. 2026;13. doi:10.1016/j.jajp.2026.100391
apa: Ludwig, J.-P., Tolke, E., Schlichter, M. C., Bobbert, M., & Meschut, G.
(2026). Numerical analysis of the robustness of self-pierce riveting with pre-formed
joining partners. Journal of Advanced Joining Processes, 13, Article
100391. https://doi.org/10.1016/j.jajp.2026.100391
bibtex: '@article{Ludwig_Tolke_Schlichter_Bobbert_Meschut_2026, title={Numerical
analysis of the robustness of self-pierce riveting with pre-formed joining partners},
volume={13}, DOI={10.1016/j.jajp.2026.100391},
number={100391}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Ludwig, Jean-Patrick and Tolke, Emil and Schlichter, Malte Christian
and Bobbert, Mathias and Meschut, Gerson}, year={2026} }'
chicago: Ludwig, Jean-Patrick, Emil Tolke, Malte Christian Schlichter, Mathias Bobbert,
and Gerson Meschut. “Numerical Analysis of the Robustness of Self-Pierce Riveting
with Pre-Formed Joining Partners.” Journal of Advanced Joining Processes
13 (2026). https://doi.org/10.1016/j.jajp.2026.100391.
ieee: 'J.-P. Ludwig, E. Tolke, M. C. Schlichter, M. Bobbert, and G. Meschut, “Numerical
analysis of the robustness of self-pierce riveting with pre-formed joining partners,”
Journal of Advanced Joining Processes, vol. 13, Art. no. 100391, 2026,
doi: 10.1016/j.jajp.2026.100391.'
mla: Ludwig, Jean-Patrick, et al. “Numerical Analysis of the Robustness of Self-Pierce
Riveting with Pre-Formed Joining Partners.” Journal of Advanced Joining Processes,
vol. 13, 100391, Elsevier BV, 2026, doi:10.1016/j.jajp.2026.100391.
short: J.-P. Ludwig, E. Tolke, M.C. Schlichter, M. Bobbert, G. Meschut, Journal
of Advanced Joining Processes 13 (2026).
date_created: 2026-03-16T12:30:39Z
date_updated: 2026-03-16T12:38:13Z
department:
- _id: '9'
doi: 10.1016/j.jajp.2026.100391
intvolume: ' 13'
keyword:
- Self-pierce riveting
- FE modelling
- Plastic pre-deformation
- Meta modelling
language:
- iso: eng
project:
- _id: '131'
name: TRR 285 - Project Area A
- _id: '135'
name: TRR 285 - Subproject A01
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Numerical analysis of the robustness of self-pierce riveting with pre-formed
joining partners
type: journal_article
user_id: '76631'
volume: 13
year: '2026'
...
---
_id: '64982'
author:
- first_name: Kai
full_name: Lingnau, Kai
last_name: Lingnau
- first_name: Chantal
full_name: Theile-Rasche, Chantal
last_name: Theile-Rasche
- first_name: Klaus
full_name: Vissing, Klaus
last_name: Vissing
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Guido
full_name: Grundmeier, Guido
id: '194'
last_name: Grundmeier
- first_name: Martin
full_name: Wiesing, Martin
last_name: Wiesing
citation:
ama: Lingnau K, Theile-Rasche C, Vissing K, Moritzer E, Grundmeier G, Wiesing M.
Mechanisms of deposit formation in injection moulding cavities and the role of
tool coatings and internal release agents. Surface and Coatings Technology.
2026;524:133280. doi:10.1016/j.surfcoat.2026.133280
apa: Lingnau, K., Theile-Rasche, C., Vissing, K., Moritzer, E., Grundmeier, G.,
& Wiesing, M. (2026). Mechanisms of deposit formation in injection moulding
cavities and the role of tool coatings and internal release agents. Surface
and Coatings Technology, 524, 133280. https://doi.org/10.1016/j.surfcoat.2026.133280
bibtex: '@article{Lingnau_Theile-Rasche_Vissing_Moritzer_Grundmeier_Wiesing_2026,
title={Mechanisms of deposit formation in injection moulding cavities and the
role of tool coatings and internal release agents}, volume={524}, DOI={10.1016/j.surfcoat.2026.133280},
journal={Surface and Coatings Technology}, author={Lingnau, Kai and Theile-Rasche,
Chantal and Vissing, Klaus and Moritzer, Elmar and Grundmeier, Guido and Wiesing,
Martin}, year={2026}, pages={133280} }'
chicago: 'Lingnau, Kai, Chantal Theile-Rasche, Klaus Vissing, Elmar Moritzer, Guido
Grundmeier, and Martin Wiesing. “Mechanisms of Deposit Formation in Injection
Moulding Cavities and the Role of Tool Coatings and Internal Release Agents.”
Surface and Coatings Technology 524 (2026): 133280. https://doi.org/10.1016/j.surfcoat.2026.133280.'
ieee: 'K. Lingnau, C. Theile-Rasche, K. Vissing, E. Moritzer, G. Grundmeier, and
M. Wiesing, “Mechanisms of deposit formation in injection moulding cavities and
the role of tool coatings and internal release agents,” Surface and Coatings
Technology, vol. 524, p. 133280, 2026, doi: 10.1016/j.surfcoat.2026.133280.'
mla: Lingnau, Kai, et al. “Mechanisms of Deposit Formation in Injection Moulding
Cavities and the Role of Tool Coatings and Internal Release Agents.” Surface
and Coatings Technology, vol. 524, 2026, p. 133280, doi:10.1016/j.surfcoat.2026.133280.
short: K. Lingnau, C. Theile-Rasche, K. Vissing, E. Moritzer, G. Grundmeier, M.
Wiesing, Surface and Coatings Technology 524 (2026) 133280.
date_created: 2026-03-16T12:20:48Z
date_updated: 2026-03-16T12:51:54Z
department:
- _id: '9'
- _id: '367'
- _id: '302'
doi: 10.1016/j.surfcoat.2026.133280
extern: '1'
intvolume: ' 524'
keyword:
- Plasmabeschichtung
- Spritzgießen
- Spritzgießwerkzeug
- Trennschicht
- ultraTrenn
- Werkzeugbeschichtung
language:
- iso: eng
page: '133280'
publication: Surface and Coatings Technology
publication_identifier:
issn:
- '02578972'
quality_controlled: '1'
status: public
title: Mechanisms of deposit formation in injection moulding cavities and the role
of tool coatings and internal release agents
type: journal_article
user_id: '59363'
volume: 524
year: '2026'
...
---
_id: '65010'
author:
- first_name: Jan
full_name: Landgräber, Jan
id: '64499'
last_name: Landgräber
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: 'Landgräber J, Schöppner V, Brüning F. Der Einzug als Schlüssel zum Erfolg:
Untersuchung des Einzugsverhaltens bei Spritzgießaggregaten. Kunststoffe.
2026:22-25.'
apa: 'Landgräber, J., Schöppner, V., & Brüning, F. (2026). Der Einzug als Schlüssel
zum Erfolg: Untersuchung des Einzugsverhaltens bei Spritzgießaggregaten. Kunststoffe,
01, 22–25.'
bibtex: '@article{Landgräber_Schöppner_Brüning_2026, title={Der Einzug als Schlüssel
zum Erfolg: Untersuchung des Einzugsverhaltens bei Spritzgießaggregaten}, number={01},
journal={Kunststoffe}, author={Landgräber, Jan and Schöppner, Volker and Brüning,
Florian}, year={2026}, pages={22–25} }'
chicago: 'Landgräber, Jan, Volker Schöppner, and Florian Brüning. “Der Einzug als
Schlüssel zum Erfolg: Untersuchung des Einzugsverhaltens bei Spritzgießaggregaten.”
Kunststoffe, 2026.'
ieee: 'J. Landgräber, V. Schöppner, and F. Brüning, “Der Einzug als Schlüssel zum
Erfolg: Untersuchung des Einzugsverhaltens bei Spritzgießaggregaten,” Kunststoffe,
no. 01, pp. 22–25, 2026.'
mla: 'Landgräber, Jan, et al. “Der Einzug als Schlüssel zum Erfolg: Untersuchung
des Einzugsverhaltens bei Spritzgießaggregaten.” Kunststoffe, no. 01, 2026,
pp. 22–25.'
short: J. Landgräber, V. Schöppner, F. Brüning, Kunststoffe (2026) 22–25.
date_created: 2026-03-16T14:33:38Z
date_updated: 2026-03-16T14:33:44Z
department:
- _id: '9'
- _id: '367'
issue: '01'
language:
- iso: ger
page: 22 - 25
publication: Kunststoffe
publication_date: 2026.01.14
status: public
title: 'Der Einzug als Schlüssel zum Erfolg: Untersuchung des Einzugsverhaltens bei
Spritzgießaggregaten'
type: newspaper_article
user_id: '59363'
year: '2026'
...
---
_id: '65037'
abstract:
- lang: eng
text: "ABSTRACT\r\n Homogenization
methods simulate heterogeneous materials like composites effectively, but high
computational demands can offset their benefits. This work balances accuracy and
efficiency by assessing model and discretization errors of the finite element
method (FEM) through an adaptive numerical scheme. Two model hierarchies are introduced,
combining mean‐field and full‐field methods, and nonuniform transformation field
analysis (NTFA) with full‐field methods. Both hierarchies use a full‐field FEM
solution of the representative volume element (RVE) as reference. The study highlights
the benefits of using effective constitutive equations from mean‐field and full‐field
methods as well as NTFA methods, with a goal‐oriented a posteriori error estimator
based on duality techniques controlling mesh and model errors in a forwards‐in‐time
manner."
article_number: e70294
author:
- first_name: Arnold Tchomgue
full_name: Simeu, Arnold Tchomgue
last_name: Simeu
- first_name: Ismail
full_name: Caylak, Ismail
id: '75'
last_name: Caylak
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
citation:
ama: Simeu AT, Caylak I, Ostwald R. Mesh and Model Adaptivity for Multiscale Elastoplastic
Models With Prandtl‐Reuss Type Material Laws. International Journal for Numerical
Methods in Engineering. 2026;127(6). doi:10.1002/nme.70294
apa: Simeu, A. T., Caylak, I., & Ostwald, R. (2026). Mesh and Model Adaptivity
for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws. International
Journal for Numerical Methods in Engineering, 127(6), Article e70294.
https://doi.org/10.1002/nme.70294
bibtex: '@article{Simeu_Caylak_Ostwald_2026, title={Mesh and Model Adaptivity for
Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material Laws}, volume={127},
DOI={10.1002/nme.70294}, number={6e70294},
journal={International Journal for Numerical Methods in Engineering}, publisher={Wiley},
author={Simeu, Arnold Tchomgue and Caylak, Ismail and Ostwald, Richard}, year={2026}
}'
chicago: Simeu, Arnold Tchomgue, Ismail Caylak, and Richard Ostwald. “Mesh and Model
Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss Type Material
Laws.” International Journal for Numerical Methods in Engineering 127,
no. 6 (2026). https://doi.org/10.1002/nme.70294.
ieee: 'A. T. Simeu, I. Caylak, and R. Ostwald, “Mesh and Model Adaptivity for Multiscale
Elastoplastic Models With Prandtl‐Reuss Type Material Laws,” International
Journal for Numerical Methods in Engineering, vol. 127, no. 6, Art. no. e70294,
2026, doi: 10.1002/nme.70294.'
mla: Simeu, Arnold Tchomgue, et al. “Mesh and Model Adaptivity for Multiscale Elastoplastic
Models With Prandtl‐Reuss Type Material Laws.” International Journal for Numerical
Methods in Engineering, vol. 127, no. 6, e70294, Wiley, 2026, doi:10.1002/nme.70294.
short: A.T. Simeu, I. Caylak, R. Ostwald, International Journal for Numerical Methods
in Engineering 127 (2026).
date_created: 2026-03-18T05:28:29Z
date_updated: 2026-03-18T05:31:02Z
department:
- _id: '9'
- _id: '952'
- _id: '321'
doi: 10.1002/nme.70294
intvolume: ' 127'
issue: '6'
language:
- iso: eng
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
issn:
- 0029-5981
- 1097-0207
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Mesh and Model Adaptivity for Multiscale Elastoplastic Models With Prandtl‐Reuss
Type Material Laws
type: journal_article
user_id: '85414'
volume: 127
year: '2026'
...
---
_id: '64997'
author:
- first_name: Dorte
full_name: Trienens, Dorte
id: '44116'
last_name: Trienens
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Trienens D, Brüning F, Schöppner V. Wo Forschung, KI und Praxis aufeinandertreffen.
kunststoffland NRW report. 2026;(03-2025):24–25.
apa: Trienens, D., Brüning, F., & Schöppner, V. (2026). Wo Forschung, KI und
Praxis aufeinandertreffen. kunststoffland NRW report, 03–2025, 24–25.
bibtex: '@article{Trienens_Brüning_Schöppner_2026, title={Wo Forschung, KI und Praxis
aufeinandertreffen}, number={03–2025}, journal={kunststoffland NRW report}, author={Trienens,
Dorte and Brüning, Florian and Schöppner, Volker}, year={2026}, pages={24–25}
}'
chicago: 'Trienens, Dorte, Florian Brüning, and Volker Schöppner. “Wo Forschung,
KI und Praxis aufeinandertreffen.” kunststoffland NRW report, no. 03–2025
(2026): 24–25.'
ieee: D. Trienens, F. Brüning, and V. Schöppner, “Wo Forschung, KI und Praxis aufeinandertreffen,”
kunststoffland NRW report, no. 03–2025, pp. 24–25, 2026.
mla: Trienens, Dorte, et al. “Wo Forschung, KI und Praxis aufeinandertreffen.” kunststoffland
NRW report, no. 03–2025, 2026, pp. 24–25.
short: D. Trienens, F. Brüning, V. Schöppner, kunststoffland NRW report (2026) 24–25.
date_created: 2026-03-16T14:23:33Z
date_updated: 2026-03-18T09:24:12Z
department:
- _id: '9'
- _id: '367'
issue: 03-2025
keyword:
- extrusion
- KI
- Simulation
language:
- iso: ger
page: 24–25
publication: kunststoffland NRW report
status: public
title: Wo Forschung, KI und Praxis aufeinandertreffen
type: journal_article
user_id: '59363'
year: '2026'
...
---
_id: '65041'
author:
- first_name: Jan
full_name: Landgräber, Jan
id: '64499'
last_name: Landgräber
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Landgräber J, Schöppner V. Verbesserung des Einzugsverhaltens im Spritzgießprozess
- Numerik und Experiment. In: VDI Jahrestagung Spritzgießen, ed. ; 2026.'
apa: Landgräber, J., & Schöppner, V. (2026). Verbesserung des Einzugsverhaltens
im Spritzgießprozess - Numerik und Experiment (VDI Jahrestagung Spritzgießen,
Ed.).
bibtex: '@inproceedings{Landgräber_Schöppner_2026, title={Verbesserung des Einzugsverhaltens
im Spritzgießprozess - Numerik und Experiment}, author={Landgräber, Jan and Schöppner,
Volker}, editor={VDI Jahrestagung Spritzgießen}, year={2026} }'
chicago: Landgräber, Jan, and Volker Schöppner. “Verbesserung des Einzugsverhaltens
im Spritzgießprozess - Numerik und Experiment.” edited by VDI Jahrestagung Spritzgießen,
2026.
ieee: J. Landgräber and V. Schöppner, “Verbesserung des Einzugsverhaltens im Spritzgießprozess
- Numerik und Experiment,” 2026.
mla: Landgräber, Jan, and Volker Schöppner. Verbesserung des Einzugsverhaltens
im Spritzgießprozess - Numerik und Experiment. Edited by VDI Jahrestagung
Spritzgießen, 2026.
short: 'J. Landgräber, V. Schöppner, in: VDI Jahrestagung Spritzgießen (Ed.), 2026.'
corporate_editor:
- VDI Jahrestagung Spritzgießen
date_created: 2026-03-18T09:38:20Z
date_updated: 2026-03-18T09:38:27Z
department:
- _id: '9'
- _id: '367'
language:
- iso: ger
status: public
title: Verbesserung des Einzugsverhaltens im Spritzgießprozess - Numerik und Experiment
type: conference
user_id: '59363'
year: '2026'
...
---
_id: '65093'
author:
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Jonathan
full_name: Behm, Jonathan
last_name: Behm
- first_name: Samuel
full_name: Leitenmaier, Samuel
last_name: Leitenmaier
citation:
ama: Marten T, Ostermann M, Behm J, Leitenmaier S. NeMo.bil - Individualisierter
öffentlicher Personennahverkehr - iÖV. Berufsbildung - Zeitschrift für Theorie-Praxis-Dialog.
2026;209(1):23-27. doi:10.3278/BB2601
apa: Marten, T., Ostermann, M., Behm, J., & Leitenmaier, S. (2026). NeMo.bil
- Individualisierter öffentlicher Personennahverkehr - iÖV. Berufsbildung -
Zeitschrift für Theorie-Praxis-Dialog, 209(1), 23–27. https://doi.org/10.3278/BB2601
bibtex: '@article{Marten_Ostermann_Behm_Leitenmaier_2026, title={NeMo.bil - Individualisierter
öffentlicher Personennahverkehr - iÖV}, volume={209}, DOI={10.3278/BB2601},
number={1}, journal={Berufsbildung - Zeitschrift für Theorie-Praxis-Dialog}, publisher={wbv
Publikation}, author={Marten, Thorsten and Ostermann, Moritz and Behm, Jonathan
and Leitenmaier, Samuel}, year={2026}, pages={23–27} }'
chicago: 'Marten, Thorsten, Moritz Ostermann, Jonathan Behm, and Samuel Leitenmaier.
“NeMo.bil - Individualisierter öffentlicher Personennahverkehr - iÖV.” Berufsbildung
- Zeitschrift für Theorie-Praxis-Dialog 209, no. 1 (2026): 23–27. https://doi.org/10.3278/BB2601.'
ieee: 'T. Marten, M. Ostermann, J. Behm, and S. Leitenmaier, “NeMo.bil - Individualisierter
öffentlicher Personennahverkehr - iÖV,” Berufsbildung - Zeitschrift für Theorie-Praxis-Dialog,
vol. 209, no. 1, pp. 23–27, 2026, doi: 10.3278/BB2601.'
mla: Marten, Thorsten, et al. “NeMo.bil - Individualisierter öffentlicher Personennahverkehr
- iÖV.” Berufsbildung - Zeitschrift für Theorie-Praxis-Dialog, vol. 209,
no. 1, wbv Publikation, 2026, pp. 23–27, doi:10.3278/BB2601.
short: T. Marten, M. Ostermann, J. Behm, S. Leitenmaier, Berufsbildung - Zeitschrift
für Theorie-Praxis-Dialog 209 (2026) 23–27.
date_created: 2026-03-23T10:30:19Z
date_updated: 2026-03-23T10:36:09Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.3278/BB2601
intvolume: ' 209'
issue: '1'
language:
- iso: ger
page: 23-27
publication: Berufsbildung - Zeitschrift für Theorie-Praxis-Dialog
publication_identifier:
eissn:
- '21991944'
publication_status: published
publisher: wbv Publikation
quality_controlled: '1'
status: public
title: NeMo.bil - Individualisierter öffentlicher Personennahverkehr - iÖV
type: journal_article
user_id: '338'
volume: 209
year: '2026'
...
---
_id: '65104'
article_number: '104319'
author:
- first_name: Lucas
full_name: Hermelingmeier, Lucas
id: '58649'
last_name: Hermelingmeier
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Hermelingmeier L, Beule F, Teutenberg D, Meschut G. Comparison of fixture-based
and manual fiber integration in adhesive joints: Effects on strain signal quality.
International Journal of Adhesion and Adhesives. 2026;149. doi:10.1016/j.ijadhadh.2026.104319'
apa: 'Hermelingmeier, L., Beule, F., Teutenberg, D., & Meschut, G. (2026). Comparison
of fixture-based and manual fiber integration in adhesive joints: Effects on strain
signal quality. International Journal of Adhesion and Adhesives, 149,
Article 104319. https://doi.org/10.1016/j.ijadhadh.2026.104319'
bibtex: '@article{Hermelingmeier_Beule_Teutenberg_Meschut_2026, title={Comparison
of fixture-based and manual fiber integration in adhesive joints: Effects on strain
signal quality}, volume={149}, DOI={10.1016/j.ijadhadh.2026.104319},
number={104319}, journal={International Journal of Adhesion and Adhesives}, publisher={Elsevier
BV}, author={Hermelingmeier, Lucas and Beule, Felix and Teutenberg, Dominik and
Meschut, Gerson}, year={2026} }'
chicago: 'Hermelingmeier, Lucas, Felix Beule, Dominik Teutenberg, and Gerson Meschut.
“Comparison of Fixture-Based and Manual Fiber Integration in Adhesive Joints:
Effects on Strain Signal Quality.” International Journal of Adhesion and Adhesives
149 (2026). https://doi.org/10.1016/j.ijadhadh.2026.104319.'
ieee: 'L. Hermelingmeier, F. Beule, D. Teutenberg, and G. Meschut, “Comparison of
fixture-based and manual fiber integration in adhesive joints: Effects on strain
signal quality,” International Journal of Adhesion and Adhesives, vol.
149, Art. no. 104319, 2026, doi: 10.1016/j.ijadhadh.2026.104319.'
mla: 'Hermelingmeier, Lucas, et al. “Comparison of Fixture-Based and Manual Fiber
Integration in Adhesive Joints: Effects on Strain Signal Quality.” International
Journal of Adhesion and Adhesives, vol. 149, 104319, Elsevier BV, 2026, doi:10.1016/j.ijadhadh.2026.104319.'
short: L. Hermelingmeier, F. Beule, D. Teutenberg, G. Meschut, International Journal
of Adhesion and Adhesives 149 (2026).
date_created: 2026-03-24T13:17:14Z
date_updated: 2026-03-24T13:19:51Z
department:
- _id: '157'
doi: 10.1016/j.ijadhadh.2026.104319
intvolume: ' 149'
language:
- iso: eng
publication: International Journal of Adhesion and Adhesives
publication_identifier:
issn:
- 0143-7496
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Comparison of fixture-based and manual fiber integration in adhesive joints:
Effects on strain signal quality'
type: journal_article
user_id: '58649'
volume: 149
year: '2026'
...
---
_id: '65266'
abstract:
- lang: eng
text: "ABSTRACT\r\n This work
is concerned with the modeling of a cold‐box sand, a composition of sand grains
and a resin binder. To this end, experiments are performed, which show the following
characteristics: localization phenomena in the form of a shear band, softening
behavior in the force‐displacement curve, and asymmetric behavior for compression
and tension. To model this complex material behavior, a micromorphic continuum
is used. In the present contribution, we focus on the linear‐elastic regime and
demonstrate the identifiability of micromorphic material parameters under deliberately
induced inhomogeneous deformation states. In addition to the degrees of freedom
of a classical continuum, the micromorphic model has additional degrees of freedom,
introduced here in a phenomenological sense to represent kinematically enriched
deformation modes associated with the granular microstructure. Accordingly, the
micromorphic fields are not interpreted as a separate physical scale (e.g., “binder”
vs. “grains”), but as an effective continuum description at the specimen scale.
This contribution addresses parameter identification for a micromorphic model
of cold‐box sand, with a clear separation between homogeneous deformation states
governing classical elastic parameters and inhomogeneous states required to activate
and identify micromorphic length‐scale parameters. The main challenge lies in
identifying the micro material parameters. To determine these, the corresponding
gradient terms in the constitutive formulation must be triggered via properly
tuned experiments. Micro‐parameter identification is demonstrated using synthetic
data generated from a boundary‐value problem with inhomogeneous displacement fields.
The chosen benchmark enables controlled activation of gradient terms and thereby
renders optimization‐based identification of micromorphic parameters feasible.
The synthetic example is deliberately chosen to assess feasibility and identifiability
under controlled conditions, thereby isolating micromorphic identifiability aspects
from experimental uncertainties. The novelty of the contribution lies in explicitly
linking micromorphic parameter identifiability to kinematic inhomogeneity, and
in demonstrating this link within a tractable forward– inverse setting for a linear‐elastic
micromorphic continuum."
article_number: e70093
author:
- first_name: Alexander
full_name: Börger, Alexander
id: '52037'
last_name: Börger
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
- first_name: Ismail
full_name: Caylak, Ismail
id: '75'
last_name: Caylak
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
citation:
ama: Börger A, Mahnken R, Caylak I, Ostwald R. Aspects of Parameter Identification
for a Micromorphic Continuum applied to a Cold‐Box Sand. Proceedings in Applied
Mathematics and Mechanics. 2026;26(2). doi:10.1002/pamm.70093
apa: Börger, A., Mahnken, R., Caylak, I., & Ostwald, R. (2026). Aspects of Parameter
Identification for a Micromorphic Continuum applied to a Cold‐Box Sand. Proceedings
in Applied Mathematics and Mechanics, 26(2), Article e70093. https://doi.org/10.1002/pamm.70093
bibtex: '@article{Börger_Mahnken_Caylak_Ostwald_2026, title={Aspects of Parameter
Identification for a Micromorphic Continuum applied to a Cold‐Box Sand}, volume={26},
DOI={10.1002/pamm.70093}, number={2e70093},
journal={Proceedings in Applied Mathematics and Mechanics}, publisher={Wiley},
author={Börger, Alexander and Mahnken, Rolf and Caylak, Ismail and Ostwald, Richard},
year={2026} }'
chicago: Börger, Alexander, Rolf Mahnken, Ismail Caylak, and Richard Ostwald. “Aspects
of Parameter Identification for a Micromorphic Continuum Applied to a Cold‐Box
Sand.” Proceedings in Applied Mathematics and Mechanics 26, no. 2 (2026).
https://doi.org/10.1002/pamm.70093.
ieee: 'A. Börger, R. Mahnken, I. Caylak, and R. Ostwald, “Aspects of Parameter Identification
for a Micromorphic Continuum applied to a Cold‐Box Sand,” Proceedings in Applied
Mathematics and Mechanics, vol. 26, no. 2, Art. no. e70093, 2026, doi: 10.1002/pamm.70093.'
mla: Börger, Alexander, et al. “Aspects of Parameter Identification for a Micromorphic
Continuum Applied to a Cold‐Box Sand.” Proceedings in Applied Mathematics and
Mechanics, vol. 26, no. 2, e70093, Wiley, 2026, doi:10.1002/pamm.70093.
short: A. Börger, R. Mahnken, I. Caylak, R. Ostwald, Proceedings in Applied Mathematics
and Mechanics 26 (2026).
date_created: 2026-04-01T04:52:34Z
date_updated: 2026-04-01T04:54:17Z
department:
- _id: '9'
- _id: '952'
- _id: '321'
doi: 10.1002/pamm.70093
intvolume: ' 26'
issue: '2'
language:
- iso: eng
publication: Proceedings in Applied Mathematics and Mechanics
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Aspects of Parameter Identification for a Micromorphic Continuum applied to
a Cold‐Box Sand
type: journal_article
user_id: '85414'
volume: 26
year: '2026'
...