---
_id: '60592'
abstract:
- lang: eng
text: This study investigates the occurrence and mitigation of liquid metal
embrittlement occurring during resistance spot welding in deep-drawn automotive
components, specifically focusing on an S-Rail made from advanced high-strength
steel. A simulation-based liquid metal embrittlement risk criterion based on local
major component stresses was established and used to quantify and compare liquid
metal embrittlement risks between different tests. Experimental and numerical
analyses were conducted, revealing that springback significantly impacts liquid
metal embrittlement formation. Adjustments in electrode geometry and hold time
post-welding were found to mitigate liquid metal embrittlement risks. The effects
of stack-up configuration and related parameter settings on liquid metal embrittlement
occurrence were identified and liquid metal embrittlement was effectively prevented
across both stack-up configurations. These findings advance the understanding
of liquid metal embrittlement mechanisms and provide practical approaches to enhance
the spot weld quality in AHSS-based body-in-whites.
article_type: original
author:
- first_name: Max
full_name: Biegler, Max
last_name: Biegler
- first_name: Keke
full_name: Yang, Keke
id: '65085'
last_name: Yang
orcid: 0000-0001-9201-9304
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Michael
full_name: Rethmeier, Michael
last_name: Rethmeier
citation:
ama: Biegler M, Yang K, Meschut G, Rethmeier M. Occurrence and avoidance of liquid
metal embrittlement in resistance spot welding of springback-afflicted deep-drawn
components. Science and Technology of Welding and Joining. Published online
2025. doi:10.1177/13621718251340452
apa: Biegler, M., Yang, K., Meschut, G., & Rethmeier, M. (2025). Occurrence
and avoidance of liquid metal embrittlement in resistance spot welding of springback-afflicted
deep-drawn components. Science and Technology of Welding and Joining. https://doi.org/10.1177/13621718251340452
bibtex: '@article{Biegler_Yang_Meschut_Rethmeier_2025, title={Occurrence and avoidance
of liquid metal embrittlement in resistance spot welding of springback-afflicted
deep-drawn components}, DOI={10.1177/13621718251340452},
journal={Science and Technology of Welding and Joining}, publisher={SAGE Publications},
author={Biegler, Max and Yang, Keke and Meschut, Gerson and Rethmeier, Michael},
year={2025} }'
chicago: Biegler, Max, Keke Yang, Gerson Meschut, and Michael Rethmeier. “Occurrence
and Avoidance of Liquid Metal Embrittlement in Resistance Spot Welding of Springback-Afflicted
Deep-Drawn Components.” Science and Technology of Welding and Joining,
2025. https://doi.org/10.1177/13621718251340452.
ieee: 'M. Biegler, K. Yang, G. Meschut, and M. Rethmeier, “Occurrence and avoidance
of liquid metal embrittlement in resistance spot welding of springback-afflicted
deep-drawn components,” Science and Technology of Welding and Joining,
2025, doi: 10.1177/13621718251340452.'
mla: Biegler, Max, et al. “Occurrence and Avoidance of Liquid Metal Embrittlement
in Resistance Spot Welding of Springback-Afflicted Deep-Drawn Components.” Science
and Technology of Welding and Joining, SAGE Publications, 2025, doi:10.1177/13621718251340452.
short: M. Biegler, K. Yang, G. Meschut, M. Rethmeier, Science and Technology of
Welding and Joining (2025).
date_created: 2025-07-12T22:44:20Z
date_updated: 2025-07-14T08:38:19Z
ddc:
- '620'
department:
- _id: '157'
doi: 10.1177/13621718251340452
file:
- access_level: closed
content_type: application/pdf
creator: kekeyang
date_created: 2025-07-14T08:37:40Z
date_updated: 2025-07-14T08:37:40Z
file_id: '60599'
file_name: KYA_VÖ7.pdf
file_size: 4534008
relation: main_file
success: 1
file_date_updated: 2025-07-14T08:37:40Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
publication: Science and Technology of Welding and Joining
publication_identifier:
issn:
- 1362-1718
- 1743-2936
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: 10.1177/13621718251340452
status: public
title: Occurrence and avoidance of liquid metal embrittlement in resistance spot welding
of springback-afflicted deep-drawn components
type: journal_article
user_id: '65085'
year: '2025'
...
---
_id: '60851'
author:
- first_name: Koustav
full_name: Ghosh, Koustav
last_name: Ghosh
- first_name: Dennis
full_name: Milaege, Dennis
id: '35461'
last_name: Milaege
- first_name: Paul
full_name: Steinmeier, Paul
id: '69776'
last_name: Steinmeier
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Sudipta
full_name: Pramanik, Sudipta
last_name: Pramanik
citation:
ama: Ghosh K, Milaege D, Steinmeier P, Schaper M, Hoyer K-P, Pramanik S. Effect
of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures. Journal of
Materials Engineering and Performance. Published online 2025. doi:10.1007/s11665-025-11669-6
apa: Ghosh, K., Milaege, D., Steinmeier, P., Schaper, M., Hoyer, K.-P., & Pramanik,
S. (2025). Effect of Strain Rate on the Deformation Behavior and Energy Absorption
Characteristics of LPBF-Processed Ti2448 Microarchitectured Lattice Structures.
Journal of Materials Engineering and Performance. https://doi.org/10.1007/s11665-025-11669-6
bibtex: '@article{Ghosh_Milaege_Steinmeier_Schaper_Hoyer_Pramanik_2025, title={Effect
of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures}, DOI={10.1007/s11665-025-11669-6},
journal={Journal of Materials Engineering and Performance}, publisher={Springer
Science and Business Media LLC}, author={Ghosh, Koustav and Milaege, Dennis and
Steinmeier, Paul and Schaper, Mirko and Hoyer, Kay-Peter and Pramanik, Sudipta},
year={2025} }'
chicago: Ghosh, Koustav, Dennis Milaege, Paul Steinmeier, Mirko Schaper, Kay-Peter
Hoyer, and Sudipta Pramanik. “Effect of Strain Rate on the Deformation Behavior
and Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured
Lattice Structures.” Journal of Materials Engineering and Performance,
2025. https://doi.org/10.1007/s11665-025-11669-6.
ieee: 'K. Ghosh, D. Milaege, P. Steinmeier, M. Schaper, K.-P. Hoyer, and S. Pramanik,
“Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures,” Journal of
Materials Engineering and Performance, 2025, doi: 10.1007/s11665-025-11669-6.'
mla: Ghosh, Koustav, et al. “Effect of Strain Rate on the Deformation Behavior and
Energy Absorption Characteristics of LPBF-Processed Ti2448 Microarchitectured
Lattice Structures.” Journal of Materials Engineering and Performance,
Springer Science and Business Media LLC, 2025, doi:10.1007/s11665-025-11669-6.
short: K. Ghosh, D. Milaege, P. Steinmeier, M. Schaper, K.-P. Hoyer, S. Pramanik,
Journal of Materials Engineering and Performance (2025).
date_created: 2025-07-31T12:30:19Z
date_updated: 2025-07-31T12:36:41Z
department:
- _id: '9'
- _id: '158'
- _id: '321'
doi: 10.1007/s11665-025-11669-6
language:
- iso: eng
publication: Journal of Materials Engineering and Performance
publication_identifier:
issn:
- 1059-9495
- 1544-1024
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Effect of Strain Rate on the Deformation Behavior and Energy Absorption Characteristics
of LPBF-Processed Ti2448 Microarchitectured Lattice Structures
type: journal_article
user_id: '48411'
year: '2025'
...
---
_id: '60885'
abstract:
- lang: eng
text: To reduce transport-related environmental impacts, innovative mobility system
approaches such as on-demand services are being developed. These can include operating
vehicles that differ regarding their characteristics and application profile from
privately owned cars in motorized individual transport. Studies on life cycle
assessment and life cycle engineering of vehicle lightweight structures are mainly
limited to these privately owned cars and the impact category of climate change.
In this paper, a method for life cycle assessment-based engineering of lightweight
structures in vehicles for various mobility system applications, including on-demand
mobility services, is developed. The method enables the holistic life cycle assessment
of lightweight structures in different mobility system applications considering
parameter changes at the upstream products, component, subsystem, vehicle and
mobility system levels, as well as the integration of results into engineering
activities. A case study is used to show that the vehicle and mobility system
application of lightweight structures can significantly influence their environmental
impacts and the selection of ecologically preferable product designs. The application
in vehicles for on-demand mobility services can lead to an increase in absolute
use stage energy demand and environmental impacts compared to applications in
privately owned vehicles for motorized individual transport. However, normalized
to the transport performance provided, the lifecycle environmental impacts of
structural components in vehicles for on-demand mobility services can be lower
than in vehicles for motorized individual transport. The paper contributes methodically
and with quantitative results to improved decision making in life cycle engineering
activities for lightweight structures in mobility system applications.
article_number: '101058'
article_type: original
author:
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Eric
full_name: Dierkes, Eric
last_name: Dierkes
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Ostermann M, Dierkes E, Marten T, Tröster T. Life cycle engineering of lightweight
structures in vehicles for on-demand mobility services. Cleaner Engineering
and Technology. 2025;28. doi:10.1016/j.clet.2025.101058
apa: Ostermann, M., Dierkes, E., Marten, T., & Tröster, T. (2025). Life cycle
engineering of lightweight structures in vehicles for on-demand mobility services.
Cleaner Engineering and Technology, 28, Article 101058. https://doi.org/10.1016/j.clet.2025.101058
bibtex: '@article{Ostermann_Dierkes_Marten_Tröster_2025, title={Life cycle engineering
of lightweight structures in vehicles for on-demand mobility services}, volume={28},
DOI={10.1016/j.clet.2025.101058},
number={101058}, journal={Cleaner Engineering and Technology}, publisher={Elsevier
BV}, author={Ostermann, Moritz and Dierkes, Eric and Marten, Thorsten and Tröster,
Thomas}, year={2025} }'
chicago: Ostermann, Moritz, Eric Dierkes, Thorsten Marten, and Thomas Tröster. “Life
Cycle Engineering of Lightweight Structures in Vehicles for On-Demand Mobility
Services.” Cleaner Engineering and Technology 28 (2025). https://doi.org/10.1016/j.clet.2025.101058.
ieee: 'M. Ostermann, E. Dierkes, T. Marten, and T. Tröster, “Life cycle engineering
of lightweight structures in vehicles for on-demand mobility services,” Cleaner
Engineering and Technology, vol. 28, Art. no. 101058, 2025, doi: 10.1016/j.clet.2025.101058.'
mla: Ostermann, Moritz, et al. “Life Cycle Engineering of Lightweight Structures
in Vehicles for On-Demand Mobility Services.” Cleaner Engineering and Technology,
vol. 28, 101058, Elsevier BV, 2025, doi:10.1016/j.clet.2025.101058.
short: M. Ostermann, E. Dierkes, T. Marten, T. Tröster, Cleaner Engineering and
Technology 28 (2025).
date_created: 2025-08-06T06:53:27Z
date_updated: 2025-08-07T06:41:28Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.clet.2025.101058
intvolume: ' 28'
keyword:
- Life cycle assessment
- Life cycle engineering
- Lightweight design
- On-demand mobility
- Shared mobility
- Mobility services
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sciencedirect.com/science/article/pii/S2666790825001818?via%3Dihub
oa: '1'
project:
- _id: '780'
grant_number: 19S23003Q
name: 'NeMobil: NeMo.bil – System kooperierender Fahrzeuge für einen individualisierten
Öffentlichen Verkehr'
- _id: '405'
grant_number: '005-2111-0020 '
name: 'Climate bOWL: Climate bOWL: Climate neutral Business in Ostwestfalen-Lippe'
publication: Cleaner Engineering and Technology
publication_identifier:
issn:
- 2666-7908
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Life cycle engineering of lightweight structures in vehicles for on-demand
mobility services
type: journal_article
user_id: '44763'
volume: 28
year: '2025'
...
---
_id: '61057'
abstract:
- lang: eng
text: Verification and Validation (V&V) are essential processes in engineering Cyber-Physical
Systems. However, the role of V&V engineers is often not given sufficient attention.
Based on a systematic literature analysis and practical observations, a four-step
method for Test-oriented Resilient Requirements Engineering (ToRRE) is developed.
The steps are planning V&V, executing V&V activities, documenting V&V activities
and analyzing results of V&V activities. Applying ToRRE ensures continuous information
flow and traceability. Engineers are enabled to analyze requirements using engineering
artifacts connected through Model-Based Systems Engineering. Adopting methods
for Model-Based Effect Chain analysis to evaluated test cases and test scenarios,
conclusions on requirements engineering and change management are enabled. The
method is evaluated in an EU research project.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcel
full_name: Ebel, Marcel
id: '81788'
last_name: Ebel
orcid: https://orcid.org/0009-0007-5400-4436
citation:
ama: 'Gräßler I, Ebel M. Test-oriented Resilient Requirements Engineering (ToRRE):
extending model-based effect chain analysis to verification objectives. In: Proceedings
of the Design Society. Vol 5. Cambridge University Press (CUP); 2025:3031-3040.
doi:10.1017/pds.2025.10317'
apa: 'Gräßler, I., & Ebel, M. (2025). Test-oriented Resilient Requirements Engineering
(ToRRE): extending model-based effect chain analysis to verification objectives.
Proceedings of the Design Society, 5, 3031–3040. https://doi.org/10.1017/pds.2025.10317'
bibtex: '@inproceedings{Gräßler_Ebel_2025, title={Test-oriented Resilient Requirements
Engineering (ToRRE): extending model-based effect chain analysis to verification
objectives}, volume={5}, DOI={10.1017/pds.2025.10317},
booktitle={Proceedings of the Design Society}, publisher={Cambridge University
Press (CUP)}, author={Gräßler, Iris and Ebel, Marcel}, year={2025}, pages={3031–3040}
}'
chicago: 'Gräßler, Iris, and Marcel Ebel. “Test-Oriented Resilient Requirements
Engineering (ToRRE): Extending Model-Based Effect Chain Analysis to Verification
Objectives.” In Proceedings of the Design Society, 5:3031–40. Cambridge
University Press (CUP), 2025. https://doi.org/10.1017/pds.2025.10317.'
ieee: 'I. Gräßler and M. Ebel, “Test-oriented Resilient Requirements Engineering
(ToRRE): extending model-based effect chain analysis to verification objectives,”
in Proceedings of the Design Society, Dallas, Texas, USA, 2025, vol. 5,
pp. 3031–3040, doi: 10.1017/pds.2025.10317.'
mla: 'Gräßler, Iris, and Marcel Ebel. “Test-Oriented Resilient Requirements Engineering
(ToRRE): Extending Model-Based Effect Chain Analysis to Verification Objectives.”
Proceedings of the Design Society, vol. 5, Cambridge University Press (CUP),
2025, pp. 3031–40, doi:10.1017/pds.2025.10317.'
short: 'I. Gräßler, M. Ebel, in: Proceedings of the Design Society, Cambridge University
Press (CUP), 2025, pp. 3031–3040.'
conference:
end_date: 2025-08-14
location: Dallas, Texas, USA
name: 25th International Conference on Engineering Design
start_date: 2025-08-11
date_created: 2025-08-28T12:53:19Z
date_updated: 2025-08-28T13:14:46Z
ddc:
- '620'
department:
- _id: '152'
doi: 10.1017/pds.2025.10317
has_accepted_license: '1'
intvolume: ' 5'
keyword:
- systems engineering (SE)
- product modelling/models
- design methods
- verification & validation
- test cases & test scenarios
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.cambridge.org/core/journals/proceedings-of-the-design-society/article/testoriented-resilient-requirements-engineering-torre-extending-modelbased-effect-chain-analysis-to-verification-objectives/F1D33C094BAAF635E4E03519E15A4C08
oa: '1'
page: 3031-3040
project:
- _id: '516'
name: 'CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen'
publication: Proceedings of the Design Society
publication_identifier:
issn:
- 2732-527X
publication_status: published
publisher: Cambridge University Press (CUP)
quality_controlled: '1'
status: public
title: 'Test-oriented Resilient Requirements Engineering (ToRRE): extending model-based
effect chain analysis to verification objectives'
type: conference
user_id: '81788'
volume: 5
year: '2025'
...
---
_id: '61060'
abstract:
- lang: eng
text: "In early operational phases of severe weather events, a lack of\r\ninformation
challenges emergency management teams to gain\r\nan overview of the situation
and make informed decisions. To\r\nsupport situational exploration, unmanned aerial
and ground\r\nvehicles attract increasing attention, primarily used to\r\ndocument
operational sites. However, they offer further\r\npotential in early operational
phases. To ensure their reliable\r\nuse for exploration, decision-makers must
be aware of\r\nopportunities and limitations under prevailing conditions. For\r\nthis,
use cases for robotic simulation in emergency response\r\nare presented, considering
technical restrictions and dynamic\r\ninfluences from weather impacts. The approach
of integrating\r\nrescue robot simulation into the response phase is developed\r\nfollowing
a five-step research design. Existing use cases of\r\nrescue robot simulation
are identified in a systematic literature\r\nanalysis. The results are extended
with use cases developed for\r\nurban flooding scenarios. Subsequently, use cases
are assessed\r\nand selected for implementation in the simulation environment\r\nGazebo.
Finally, the results are validated with end users in the\r\nEU research project
CREXDATA, which focuses on decision\r\nsupport based on processing extreme data.
The implemented\r\nuse cases demonstrate the potential of robotic simulation in\r\nemergency
response to accelerate action planning in decisionmaking and provide a more detailed
picture, enabling betterinformed decisions. "
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Niklas
full_name: Döhner, Niklas
id: '108017'
last_name: Döhner
orcid: https://orcid.org/0009-0005-7676-4036
- first_name: Marcel
full_name: Ebel, Marcel
id: '81788'
last_name: Ebel
orcid: https://orcid.org/0009-0007-5400-4436
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: 'Gräßler I, Döhner N, Ebel M, Pottebaum J. Shifting boundaries from preparedness
to response: Using simulation of rescue robots in weather-induced emergencies.
In: Mensch Und Computer 2025 - Workshopband. ; 2025. doi:10.18420/muc2025-mci-ws01-187'
apa: 'Gräßler, I., Döhner, N., Ebel, M., & Pottebaum, J. (2025). Shifting boundaries
from preparedness to response: Using simulation of rescue robots in weather-induced
emergencies. Mensch Und Computer 2025 - Workshopband. Mensch und Computer,
Chemnitz. https://doi.org/10.18420/muc2025-mci-ws01-187'
bibtex: '@inproceedings{Gräßler_Döhner_Ebel_Pottebaum_2025, title={Shifting boundaries
from preparedness to response: Using simulation of rescue robots in weather-induced
emergencies}, DOI={10.18420/muc2025-mci-ws01-187},
booktitle={Mensch und Computer 2025 - Workshopband}, author={Gräßler, Iris and
Döhner, Niklas and Ebel, Marcel and Pottebaum, Jens}, year={2025} }'
chicago: 'Gräßler, Iris, Niklas Döhner, Marcel Ebel, and Jens Pottebaum. “Shifting
Boundaries from Preparedness to Response: Using Simulation of Rescue Robots in
Weather-Induced Emergencies.” In Mensch Und Computer 2025 - Workshopband,
2025. https://doi.org/10.18420/muc2025-mci-ws01-187.'
ieee: 'I. Gräßler, N. Döhner, M. Ebel, and J. Pottebaum, “Shifting boundaries from
preparedness to response: Using simulation of rescue robots in weather-induced
emergencies,” presented at the Mensch und Computer, Chemnitz, 2025, doi: 10.18420/muc2025-mci-ws01-187.'
mla: 'Gräßler, Iris, et al. “Shifting Boundaries from Preparedness to Response:
Using Simulation of Rescue Robots in Weather-Induced Emergencies.” Mensch Und
Computer 2025 - Workshopband, 2025, doi:10.18420/muc2025-mci-ws01-187.'
short: 'I. Gräßler, N. Döhner, M. Ebel, J. Pottebaum, in: Mensch Und Computer 2025
- Workshopband, 2025.'
conference:
end_date: 2025-09-03
location: Chemnitz
name: Mensch und Computer
start_date: 2025-08-31
date_created: 2025-08-28T12:58:15Z
date_updated: 2025-08-28T13:17:55Z
department:
- _id: '152'
doi: 10.18420/muc2025-mci-ws01-187
has_accepted_license: '1'
keyword:
- robotic simulation
- rescue robots
- emergency response
- extreme weather
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://dl.gi.de/server/api/core/bitstreams/1007ec7d-377f-4e9f-b2a7-e8482b955bf5/content
oa: '1'
project:
- _id: '516'
name: 'CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen'
publication: Mensch und Computer 2025 - Workshopband
quality_controlled: '1'
status: public
title: 'Shifting boundaries from preparedness to response: Using simulation of rescue
robots in weather-induced emergencies'
type: conference
user_id: '108017'
year: '2025'
...
---
_id: '61109'
author:
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcel
full_name: Ebel, Marcel
id: '81788'
last_name: Ebel
orcid: https://orcid.org/0009-0007-5400-4436
- first_name: Deniz
full_name: Özcan, Deniz
id: '58595'
last_name: Özcan
- first_name: Niklas
full_name: Döhner, Niklas
id: '108017'
last_name: Döhner
orcid: https://orcid.org/0009-0005-7676-4036
- first_name: Sylvia
full_name: Pratzler-Wanczura, Sylvia
last_name: Pratzler-Wanczura
- first_name: Enes
full_name: Derin, Enes
last_name: Derin
- first_name: Oliver
full_name: Krüger, Oliver
last_name: Krüger
- first_name: Ivana
full_name: Kruijff-Korbayova, Ivana
last_name: Kruijff-Korbayova
- first_name: Merlin
full_name: Stampa, Merlin
last_name: Stampa
citation:
ama: 'Pottebaum J, Gräßler I, Ebel M, et al. EU-Projekt CREXDATA: Erkenntnisse und
Handlungsempfehlungen zum Einsatz KI-generierter Lageinformationen für die Lagebewertung
und Maßnahmenplanung in Extremwetterlagen. Published online 2025:81-94. doi:10.5281/ZENODO.16740824'
apa: 'Pottebaum, J., Gräßler, I., Ebel, M., Özcan, D., Döhner, N., Pratzler-Wanczura,
S., Derin, E., Krüger, O., Kruijff-Korbayova, I., & Stampa, M. (2025). EU-Projekt
CREXDATA: Erkenntnisse und Handlungsempfehlungen zum Einsatz KI-generierter Lageinformationen
für die Lagebewertung und Maßnahmenplanung in Extremwetterlagen (pp. 81–94).
LibreCat University. https://doi.org/10.5281/ZENODO.16740824'
bibtex: '@article{Pottebaum_Gräßler_Ebel_Özcan_Döhner_Pratzler-Wanczura_Derin_Krüger_Kruijff-Korbayova_Stampa_2025,
series={Tagungsband der 71. Jahresfachtagung der Vereinigung zur Förderung des
Deutschen Brandschutzes (vfdb) e.V. 2025}, title={EU-Projekt CREXDATA: Erkenntnisse
und Handlungsempfehlungen zum Einsatz KI-generierter Lageinformationen für die
Lagebewertung und Maßnahmenplanung in Extremwetterlagen}, DOI={10.5281/ZENODO.16740824},
publisher={LibreCat University}, author={Pottebaum, Jens and Gräßler, Iris and
Ebel, Marcel and Özcan, Deniz and Döhner, Niklas and Pratzler-Wanczura, Sylvia
and Derin, Enes and Krüger, Oliver and Kruijff-Korbayova, Ivana and Stampa, Merlin},
year={2025}, pages={81–94}, collection={Tagungsband der 71. Jahresfachtagung der
Vereinigung zur Förderung des Deutschen Brandschutzes (vfdb) e.V. 2025} }'
chicago: 'Pottebaum, Jens, Iris Gräßler, Marcel Ebel, Deniz Özcan, Niklas Döhner,
Sylvia Pratzler-Wanczura, Enes Derin, Oliver Krüger, Ivana Kruijff-Korbayova,
and Merlin Stampa. “EU-Projekt CREXDATA: Erkenntnisse und Handlungsempfehlungen
zum Einsatz KI-generierter Lageinformationen für die Lagebewertung und Maßnahmenplanung
in Extremwetterlagen.” Tagungsband der 71. Jahresfachtagung der Vereinigung zur
Förderung des Deutschen Brandschutzes (vfdb) e.V. 2025. LibreCat University, 2025.
https://doi.org/10.5281/ZENODO.16740824.'
ieee: 'J. Pottebaum et al., “EU-Projekt CREXDATA: Erkenntnisse und Handlungsempfehlungen
zum Einsatz KI-generierter Lageinformationen für die Lagebewertung und Maßnahmenplanung
in Extremwetterlagen.” LibreCat University, pp. 81–94, 2025, doi: 10.5281/ZENODO.16740824.'
mla: 'Pottebaum, Jens, et al. EU-Projekt CREXDATA: Erkenntnisse und Handlungsempfehlungen
zum Einsatz KI-generierter Lageinformationen für die Lagebewertung und Maßnahmenplanung
in Extremwetterlagen. LibreCat University, 2025, pp. 81–94, doi:10.5281/ZENODO.16740824.'
short: J. Pottebaum, I. Gräßler, M. Ebel, D. Özcan, N. Döhner, S. Pratzler-Wanczura,
E. Derin, O. Krüger, I. Kruijff-Korbayova, M. Stampa, (2025) 81–94.
conference:
end_date: 2025-05-28
location: Koblenz, Deutschland
name: 71. Jahresfachtagung der Vereinigung zur Förderung des Deutschen Brandschutzes
(vfdb) e.V. 2025 (vfdb JFT 2025)
start_date: 2025-05-26
date_created: 2025-09-01T10:37:47Z
date_updated: 2025-09-01T10:44:51Z
department:
- _id: '152'
doi: 10.5281/ZENODO.16740824
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://zenodo.org/records/16740824
oa: '1'
page: 81-94
project:
- _id: '516'
name: 'CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen'
publication_identifier:
unknown:
- 978-3-936050-40-0
publisher: LibreCat University
quality_controlled: '1'
series_title: Tagungsband der 71. Jahresfachtagung der Vereinigung zur Förderung des
Deutschen Brandschutzes (vfdb) e.V. 2025
status: public
title: 'EU-Projekt CREXDATA: Erkenntnisse und Handlungsempfehlungen zum Einsatz KI-generierter
Lageinformationen für die Lagebewertung und Maßnahmenplanung in Extremwetterlagen'
type: conference
user_id: '81788'
year: '2025'
...
---
_id: '59740'
abstract:
- lang: eng
text: ABSTRACTIn this contribution, we propose
an innovative method for determining optimal control sequences for nonlinear systems
with partially unknown dynamics, which further expands our previous work. Within
the paradigm of model‐based design, the practicality and safety of commissioning
feedforward controls and feedback controllers have priority. Our approach leverages
probabilistic Gaussian processes to adjust for model inaccuracies from measured
system data. This differs from conventional approaches that involve complicated
analytical modeling and may entail a substantial time investment to acquire expertise
and may prove impractical. Consequently, we address the limitations inherent in
traditional design methodologies. Our research focuses on the formulation and
solution of the hybrid1 optimal control problem using probabilistic
state predictions and multiple shooting. This ensures adaptability, data efficiency,
and resilience against uncertainties in system dynamics. These attributes are
empirically substantiated through experimental validation on a chaotic and highly
sensitive dynamical system—a double pendulum on a cart. Our methodology unfolds
as an iterative learning process, systematically exploring diverse controls, accumulating
data within each iteration, and refining the control strategy until the desired
task is accomplished. The adoption of the two‐degree‐of‐freedom control structure
allows for the distinct consideration of the feedforward and the feedback control
signal. For the latter, we employ a time‐variant, linear quadratic regulator (LQR)
designed to stabilize the system around its target trajectory. Furthermore, we
integrate a probabilistic long‐term prediction through the unscented transform,
enabling systematic anticipation of safety‐critical violations. Detailed insights
into relevant implementation aspects are provided. To ascertain the real‐world
applicability, we present an exemplary application involving a double pendulum
on a cart. The objective is to bring the pendulum arms from the lower stable to
the upper unstable equilibrium by horizontally moving the cart and subsequently
stabilize them. In this scenario, we assume that the centrifugal forces, crucial
to the system dynamics, have not been accurately modeled and must be learned from
data. Solving the control task took only 5 iterations and 1 h of computation time,
which surpasses our previous work [2], where we used the purely data‐driven PILCO
framework and required 27 iterations and 57 h of computation time. The time of
interaction with the system decreased by and the computation time is lowered
by . It demonstrates significant practical applicability for commissioning control systems.
author:
- first_name: Michael
full_name: Hesse, Michael
id: '29222'
last_name: Hesse
- first_name: Luis
full_name: Schwarzer, Luis
last_name: Schwarzer
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Hesse M, Schwarzer L, Timmermann J, Trächtler A. Robust and Efficient Hybrid
Optimal Control via Gaussian Process Regression and Multiple Shooting With Experimental
Validation on a Double Pendulum on a Cart. PAMM. 2025;25(2). doi:10.1002/pamm.70004
apa: Hesse, M., Schwarzer, L., Timmermann, J., & Trächtler, A. (2025). Robust
and Efficient Hybrid Optimal Control via Gaussian Process Regression and Multiple
Shooting With Experimental Validation on a Double Pendulum on a Cart. PAMM,
25(2). https://doi.org/10.1002/pamm.70004
bibtex: '@article{Hesse_Schwarzer_Timmermann_Trächtler_2025, title={Robust and Efficient
Hybrid Optimal Control via Gaussian Process Regression and Multiple Shooting With
Experimental Validation on a Double Pendulum on a Cart}, volume={25}, DOI={10.1002/pamm.70004}, number={2},
journal={PAMM}, publisher={Wiley}, author={Hesse, Michael and Schwarzer, Luis
and Timmermann, Julia and Trächtler, Ansgar}, year={2025} }'
chicago: Hesse, Michael, Luis Schwarzer, Julia Timmermann, and Ansgar Trächtler.
“Robust and Efficient Hybrid Optimal Control via Gaussian Process Regression and
Multiple Shooting With Experimental Validation on a Double Pendulum on a Cart.”
PAMM 25, no. 2 (2025). https://doi.org/10.1002/pamm.70004.
ieee: 'M. Hesse, L. Schwarzer, J. Timmermann, and A. Trächtler, “Robust and Efficient
Hybrid Optimal Control via Gaussian Process Regression and Multiple Shooting With
Experimental Validation on a Double Pendulum on a Cart,” PAMM, vol. 25,
no. 2, 2025, doi: 10.1002/pamm.70004.'
mla: Hesse, Michael, et al. “Robust and Efficient Hybrid Optimal Control via Gaussian
Process Regression and Multiple Shooting With Experimental Validation on a Double
Pendulum on a Cart.” PAMM, vol. 25, no. 2, Wiley, 2025, doi:10.1002/pamm.70004.
short: M. Hesse, L. Schwarzer, J. Timmermann, A. Trächtler, PAMM 25 (2025).
date_created: 2025-04-30T08:18:46Z
date_updated: 2025-09-03T10:35:24Z
department:
- _id: '880'
- _id: '153'
doi: 10.1002/pamm.70004
intvolume: ' 25'
issue: '2'
language:
- iso: eng
project:
- _id: '690'
name: 'DART: Datengetriebene Methoden in der Regelungstechnik'
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
publisher: Wiley
status: public
title: Robust and Efficient Hybrid Optimal Control via Gaussian Process Regression
and Multiple Shooting With Experimental Validation on a Double Pendulum on a Cart
type: journal_article
user_id: '15402'
volume: 25
year: '2025'
...
---
_id: '61139'
article_number: '149015'
author:
- first_name: Nina
full_name: Pfeffer, Nina
last_name: Pfeffer
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Werner
full_name: Feix, Werner
last_name: Feix
- first_name: Nils
full_name: Kälble, Nils
last_name: Kälble
- first_name: Mathias
full_name: Merten, Mathias
last_name: Merten
- first_name: Andreas
full_name: Stark, Andreas
last_name: Stark
- first_name: Andre
full_name: Haufe, Andre
last_name: Haufe
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Heinz Werner
full_name: Höppel, Heinz Werner
last_name: Höppel
citation:
ama: 'Pfeffer N, Kaiser MA, Feix W, et al. Energy- and material-efficient Ti-6Al-4V
sheet part fabrication by the novel TISTRAQ-process, including resistance heating
and tool-based quenching: Insights into test stand design and material potential.
Materials Science and Engineering: A. 2025;945. doi:10.1016/j.msea.2025.149015'
apa: 'Pfeffer, N., Kaiser, M. A., Feix, W., Kälble, N., Merten, M., Stark, A., Haufe,
A., Meyer, T., Tröster, T., & Höppel, H. W. (2025). Energy- and material-efficient
Ti-6Al-4V sheet part fabrication by the novel TISTRAQ-process, including resistance
heating and tool-based quenching: Insights into test stand design and material
potential. Materials Science and Engineering: A, 945, Article 149015.
https://doi.org/10.1016/j.msea.2025.149015'
bibtex: '@article{Pfeffer_Kaiser_Feix_Kälble_Merten_Stark_Haufe_Meyer_Tröster_Höppel_2025,
title={Energy- and material-efficient Ti-6Al-4V sheet part fabrication by the
novel TISTRAQ-process, including resistance heating and tool-based quenching:
Insights into test stand design and material potential}, volume={945}, DOI={10.1016/j.msea.2025.149015},
number={149015}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Pfeffer, Nina and Kaiser, Maximilian Alexander and Feix, Werner and
Kälble, Nils and Merten, Mathias and Stark, Andreas and Haufe, Andre and Meyer,
Thomas and Tröster, Thomas and Höppel, Heinz Werner}, year={2025} }'
chicago: 'Pfeffer, Nina, Maximilian Alexander Kaiser, Werner Feix, Nils Kälble,
Mathias Merten, Andreas Stark, Andre Haufe, Thomas Meyer, Thomas Tröster, and
Heinz Werner Höppel. “Energy- and Material-Efficient Ti-6Al-4V Sheet Part Fabrication
by the Novel TISTRAQ-Process, Including Resistance Heating and Tool-Based Quenching:
Insights into Test Stand Design and Material Potential.” Materials Science
and Engineering: A 945 (2025). https://doi.org/10.1016/j.msea.2025.149015.'
ieee: 'N. Pfeffer et al., “Energy- and material-efficient Ti-6Al-4V sheet
part fabrication by the novel TISTRAQ-process, including resistance heating and
tool-based quenching: Insights into test stand design and material potential,”
Materials Science and Engineering: A, vol. 945, Art. no. 149015, 2025,
doi: 10.1016/j.msea.2025.149015.'
mla: 'Pfeffer, Nina, et al. “Energy- and Material-Efficient Ti-6Al-4V Sheet Part
Fabrication by the Novel TISTRAQ-Process, Including Resistance Heating and Tool-Based
Quenching: Insights into Test Stand Design and Material Potential.” Materials
Science and Engineering: A, vol. 945, 149015, Elsevier BV, 2025, doi:10.1016/j.msea.2025.149015.'
short: 'N. Pfeffer, M.A. Kaiser, W. Feix, N. Kälble, M. Merten, A. Stark, A. Haufe,
T. Meyer, T. Tröster, H.W. Höppel, Materials Science and Engineering: A 945 (2025).'
date_created: 2025-09-06T06:41:08Z
date_updated: 2025-09-07T10:37:00Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.msea.2025.149015
intvolume: ' 945'
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
status: public
title: 'Energy- and material-efficient Ti-6Al-4V sheet part fabrication by the novel
TISTRAQ-process, including resistance heating and tool-based quenching: Insights
into test stand design and material potential'
type: journal_article
user_id: '72351'
volume: 945
year: '2025'
...
---
_id: '64894'
abstract:
- lang: eng
text: "This dataset contains experimental measurements of the radial dynamic and
quasi-static characteristics of four different types of Rubber-Metal Bushings
(RMBs) used in the suspension system of a passenger car under harmonic displacement
excitation. For each bushing type, 2–3 individual specimens were tested.\r\n \r\nQuasi-static
measurements were performed at a constant excitation frequency of 0.05 Hz with
varying displacement amplitudes. Dynamic measurements were conducted with displacement
amplitudes ranging from 0.04 mm to 0.3 mm and excitation frequencies of 2, 5,
10, ..., up to 100 Hz.\r\n\r\nThe data is structured by bushing type, measurement
mode, amplitude, and frequency, and is provided in *.csv and *.hrm format. It
is intended to support further research in modeling rubber-metal bushings and
parameter identification techniques."
author:
- first_name: Jan
full_name: Schütte, Jan
id: '22109'
last_name: Schütte
orcid: 0000-0001-9025-9742
citation:
ama: 'Schütte J. Experimental Dataset: Force and Displacement Measurements of
Four Rubber-Metal Bushing Types from a Passenger Car under Harmonic Displacement
Excitation. LibreCat University; 2025. doi:10.5281/ZENODO.14851317'
apa: 'Schütte, J. (2025). Experimental Dataset: Force and Displacement Measurements
of Four Rubber-Metal Bushing Types from a Passenger Car under Harmonic Displacement
Excitation. LibreCat University. https://doi.org/10.5281/ZENODO.14851317'
bibtex: '@book{Schütte_2025, title={Experimental Dataset: Force and Displacement
Measurements of Four Rubber-Metal Bushing Types from a Passenger Car under Harmonic
Displacement Excitation}, DOI={10.5281/ZENODO.14851317},
publisher={LibreCat University}, author={Schütte, Jan}, year={2025} }'
chicago: 'Schütte, Jan. Experimental Dataset: Force and Displacement Measurements
of Four Rubber-Metal Bushing Types from a Passenger Car under Harmonic Displacement
Excitation. LibreCat University, 2025. https://doi.org/10.5281/ZENODO.14851317.'
ieee: 'J. Schütte, Experimental Dataset: Force and Displacement Measurements
of Four Rubber-Metal Bushing Types from a Passenger Car under Harmonic Displacement
Excitation. LibreCat University, 2025.'
mla: 'Schütte, Jan. Experimental Dataset: Force and Displacement Measurements
of Four Rubber-Metal Bushing Types from a Passenger Car under Harmonic Displacement
Excitation. LibreCat University, 2025, doi:10.5281/ZENODO.14851317.'
short: 'J. Schütte, Experimental Dataset: Force and Displacement Measurements of
Four Rubber-Metal Bushing Types from a Passenger Car under Harmonic Displacement
Excitation, LibreCat University, 2025.'
date_created: 2026-03-11T10:22:01Z
date_updated: 2026-03-11T10:25:23Z
department:
- _id: '151'
doi: 10.5281/ZENODO.14851317
keyword:
- bushing
- experimental data
- rubber-metal-bushing
- Dataset suspension
publisher: LibreCat University
status: public
title: 'Experimental Dataset: Force and Displacement Measurements of Four Rubber-Metal
Bushing Types from a Passenger Car under Harmonic Displacement Excitation'
type: research_data
user_id: '22109'
year: '2025'
...
---
_id: '64660'
author:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Neukötter M, Jesinghausen S, Schmid H-J. Polymer Suspensions under Uniaxial
Extension – A novel Way to Produce Core-Shell-Particles? . In: ; 2025.'
apa: Neukötter, M., Jesinghausen, S., & Schmid, H.-J. (2025). Polymer Suspensions
under Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? .
PARTEC | International Congress on Particle Technology, Nürnberg.
bibtex: '@inproceedings{Neukötter_Jesinghausen_Schmid_2025, title={Polymer Suspensions
under Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? }, author={Neukötter,
Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2025} }'
chicago: Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Polymer
Suspensions under Uniaxial Extension – A Novel Way to Produce Core-Shell-Particles?
,” 2025.
ieee: M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Polymer Suspensions under
Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? ,” presented
at the PARTEC | International Congress on Particle Technology, Nürnberg, 2025.
mla: Neukötter, Moritz, et al. Polymer Suspensions under Uniaxial Extension –
A Novel Way to Produce Core-Shell-Particles? . 2025.
short: 'M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2025.'
conference:
end_date: 2025-09-25
location: Nürnberg
name: PARTEC | International Congress on Particle Technology
start_date: 2025-09-23
date_created: 2026-02-26T09:04:54Z
date_updated: 2026-03-11T14:48:24Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
status: public
title: 'Polymer Suspensions under Uniaxial Extension – A novel Way to Produce Core-Shell-Particles? '
type: conference_abstract
user_id: '45530'
year: '2025'
...
---
_id: '65011'
abstract:
- lang: eng
text: "Abstract\r\n Design of
single screw machines for polymer processing often focuses on the melt dominated
areas of the screw. However, solids conveying is a key aspect for processes with
high screw speeds, grooved feed sections, small screw diameters and material with
low bulk density. In injection moulding, throughput limitations are highly relevant
in packaging applications as due to low cooling times, plasticizing affects the
cycle time. In addition, insufficient solids conveying is a primary cause for
air residues in the melt and final product. Therefore, well-designed feed sections
are required, especially as direct processing of regrind in recycling applications
becomes more relevant due to governmental restrictions. Existing models for injection
moulding are based on analytical equations and do not allow to assess new feed
sections and feed opening designs, adapted to high screw speeds or regrind. In
this paper, numerical simulations based on the Discrete Element Method (DEM),
previously used in the field of extrusion, are carried out. In order to replicate
the cyclic, superimposed rotation and translation of the screw, a coupled approach
of DEM and Multibody Systems Simulation (MBS) is pursued. To verify the accuracy
of such coupled simulations, a special test setup is added to a conventional injection
moulding machine. Pure solids conveying is investigated, as DEM does not accommodate
for large plastic deformations or melting. Different screw and intake designs
as well as smooth and grooved barrels are investigated. Selected resins, pellet
shapes and regrind are processed, varying the processing parameters and comparing
the results to the simulation. The coupled approach replicates reality well in
terms of throughput, confirming that DEM can be utilised to further investigate
process phenomena and develop calculation models for solids conveying in injection
moulding."
author:
- first_name: Jan
full_name: Landgräber, Jan
id: '64499'
last_name: Landgräber
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Landgräber J, Schöppner V, Brüning F. Assessing solids conveying in injection
moulding machines using coupled numerical simulations based on the discrete element
method (DEM) and multibody systems (MBS). International Polymer Processing.
2025;41(1):1-14. doi:10.1515/ipp-2025-0065
apa: Landgräber, J., Schöppner, V., & Brüning, F. (2025). Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS). International Polymer
Processing, 41(1), 1–14. https://doi.org/10.1515/ipp-2025-0065
bibtex: '@article{Landgräber_Schöppner_Brüning_2025, title={Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS)}, volume={41}, DOI={10.1515/ipp-2025-0065}, number={1},
journal={International Polymer Processing}, publisher={Walter de Gruyter GmbH},
author={Landgräber, Jan and Schöppner, Volker and Brüning, Florian}, year={2025},
pages={1–14} }'
chicago: 'Landgräber, Jan, Volker Schöppner, and Florian Brüning. “Assessing Solids
Conveying in Injection Moulding Machines Using Coupled Numerical Simulations Based
on the Discrete Element Method (DEM) and Multibody Systems (MBS).” International
Polymer Processing 41, no. 1 (2025): 1–14. https://doi.org/10.1515/ipp-2025-0065.'
ieee: 'J. Landgräber, V. Schöppner, and F. Brüning, “Assessing solids conveying
in injection moulding machines using coupled numerical simulations based on the
discrete element method (DEM) and multibody systems (MBS),” International Polymer
Processing, vol. 41, no. 1, pp. 1–14, 2025, doi: 10.1515/ipp-2025-0065.'
mla: Landgräber, Jan, et al. “Assessing Solids Conveying in Injection Moulding Machines
Using Coupled Numerical Simulations Based on the Discrete Element Method (DEM)
and Multibody Systems (MBS).” International Polymer Processing, vol. 41,
no. 1, Walter de Gruyter GmbH, 2025, pp. 1–14, doi:10.1515/ipp-2025-0065.
short: J. Landgräber, V. Schöppner, F. Brüning, International Polymer Processing
41 (2025) 1–14.
date_created: 2026-03-16T14:34:08Z
date_updated: 2026-03-16T14:36:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0065
intvolume: ' 41'
issue: '1'
language:
- iso: eng
page: 1-14
publication: International Polymer Processing
publication_identifier:
issn:
- 0930-777X
- 2195-8602
publication_status: published
publisher: Walter de Gruyter GmbH
quality_controlled: '1'
status: public
title: Assessing solids conveying in injection moulding machines using coupled numerical
simulations based on the discrete element method (DEM) and multibody systems (MBS)
type: journal_article
user_id: '59363'
volume: 41
year: '2025'
...
---
_id: '64984'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Benjamin
full_name: Klie, Benjamin
last_name: Klie
- first_name: Ulrich
full_name: Giese, Ulrich
last_name: Giese
citation:
ama: 'Löhr F, Moritzer E, Klie B, Giese U. Untersuchung von Kombinationen aus Duroplasten
und Elastomeren für den einstufigen 2K-Spritzgießprozess. In: Technomer 2025
- 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren. Vol 29. Fachtagung
über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische Universität
Chemnitz 06. bis 07. November 2025. ; 2025:25.'
apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Untersuchung von
Kombinationen aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess.
In Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren:
Vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025 (p. 25).'
bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Untersuchung von Kombinationen
aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess}, volume={29.
Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische
Universität Chemnitz 06. bis 07. November 2025}, booktitle={Technomer 2025 - 29.
Fachtagung über Verarbeitung und Anwendung von Polymeren}, author={Löhr, Florian
and Moritzer, Elmar and Klie, Benjamin and Giese, Ulrich}, year={2025}, pages={25}
}'
chicago: Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Untersuchung
von Kombinationen Aus Duroplasten Und Elastomeren Für Den Einstufigen 2K-Spritzgießprozess.”
In Technomer 2025 - 29. Fachtagung Über Verarbeitung Und Anwendung von Polymeren,
29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband, Technische
Universität Chemnitz 06. bis 07. November 2025:25, 2025.
ieee: F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Untersuchung von Kombinationen
aus Duroplasten und Elastomeren für den einstufigen 2K-Spritzgießprozess,” in
Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren,
vol. 29. Fachtagung über Verarbeitung und Anwendung von Polymeren-Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025, 2025, p. 25.
mla: Löhr, Florian, et al. “Untersuchung von Kombinationen Aus Duroplasten Und Elastomeren
Für Den Einstufigen 2K-Spritzgießprozess.” Technomer 2025 - 29. Fachtagung
Über Verarbeitung Und Anwendung von Polymeren, vol. 29. Fachtagung über Verarbeitung
und Anwendung von Polymeren-Tagungsband, Technische Universität Chemnitz 06. bis
07. November 2025, 2025, p. 25.
short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: Technomer 2025 - 29. Fachtagung
Über Verarbeitung Und Anwendung von Polymeren, 2025, p. 25.'
conference:
name: Technomer 2025
date_created: 2026-03-16T12:20:49Z
date_updated: 2026-03-18T09:06:05Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
keyword:
- BMC
- Duroplast
- Kautschuk
- Mehrkomponenten
- Spritzgießen
language:
- iso: eng
page: '25'
publication: Technomer 2025 - 29. Fachtagung über Verarbeitung und Anwendung von Polymeren
status: public
title: Untersuchung von Kombinationen aus Duroplasten und Elastomeren für den einstufigen
2K-Spritzgießprozess
type: book_chapter
user_id: '59363'
volume: 29. Fachtagung über Verarbeitung und Anwendung von Polymeren -Tagungsband,
Technische Universität Chemnitz 06. bis 07. November 2025
year: '2025'
...
---
_id: '64993'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
citation:
ama: 'Löhr F. Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk
im 2K-Spritzgießprozess. In: AZuR-Kolloquium 2025. ; 2025.'
apa: Löhr, F. (2025). Direkthaftung statt Klebstoff –Verbund von Duroplasten und
Kautschuk im 2K-Spritzgießprozess. AZuR-Kolloquium 2025.
bibtex: '@inproceedings{Löhr_2025, title={Direkthaftung statt Klebstoff –Verbund
von Duroplasten und Kautschuk im 2K-Spritzgießprozess}, booktitle={AZuR-Kolloquium
2025}, author={Löhr, Florian}, year={2025} }'
chicago: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten
Und Kautschuk Im 2K-Spritzgießprozess.” In AZuR-Kolloquium 2025, 2025.
ieee: F. Löhr, “Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk
im 2K-Spritzgießprozess,” 2025.
mla: Löhr, Florian. “Direkthaftung Statt Klebstoff –Verbund von Duroplasten Und
Kautschuk Im 2K-Spritzgießprozess.” AZuR-Kolloquium 2025, 2025.
short: 'F. Löhr, in: AZuR-Kolloquium 2025, 2025.'
date_created: 2026-03-16T13:51:45Z
date_updated: 2026-03-18T08:47:01Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
language:
- iso: eng
publication: AZuR-Kolloquium 2025
status: public
title: Direkthaftung statt Klebstoff –Verbund von Duroplasten und Kautschuk im 2K-Spritzgießprozess
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '64983'
author:
- first_name: Florian
full_name: Löhr, Florian
id: '68303'
last_name: Löhr
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Benjamin
full_name: Klie, Benjamin
last_name: Klie
- first_name: Ulrich
full_name: Giese, Ulrich
last_name: Giese
citation:
ama: 'Löhr F, Moritzer E, Klie B, Giese U. Thermoset–Rubber 2K Composite Systems:
Material Combinations and Interfacial Reactions in a One-Step Injection Molding
Process. In: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract
Book. ; 2025:227–228.'
apa: 'Löhr, F., Moritzer, E., Klie, B., & Giese, U. (2025). Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process. In International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book (pp. 227–228).'
bibtex: '@inbook{Löhr_Moritzer_Klie_Giese_2025, title={Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process}, booktitle={International Rubber Conference (IRC) 2025, Bangkok,
BITEC; e-abstract book}, author={Löhr, Florian and Moritzer, Elmar and Klie, Benjamin
and Giese, Ulrich}, year={2025}, pages={227–228} }'
chicago: 'Löhr, Florian, Elmar Moritzer, Benjamin Klie, and Ulrich Giese. “Thermoset–Rubber
2K Composite Systems: Material Combinations and Interfacial Reactions in a One-Step
Injection Molding Process.” In International Rubber Conference (IRC) 2025,
Bangkok, BITEC; e-Abstract Book, 227–228, 2025.'
ieee: 'F. Löhr, E. Moritzer, B. Klie, and U. Giese, “Thermoset–Rubber 2K Composite
Systems: Material Combinations and Interfacial Reactions in a One-Step Injection
Molding Process,” in International Rubber Conference (IRC) 2025, Bangkok, BITEC;
e-abstract book, 2025, pp. 227–228.'
mla: 'Löhr, Florian, et al. “Thermoset–Rubber 2K Composite Systems: Material Combinations
and Interfacial Reactions in a One-Step Injection Molding Process.” International
Rubber Conference (IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
short: 'F. Löhr, E. Moritzer, B. Klie, U. Giese, in: International Rubber Conference
(IRC) 2025, Bangkok, BITEC; e-Abstract Book, 2025, pp. 227–228.'
conference:
name: International Rubber Conference IRC 2025
date_created: 2026-03-16T12:20:49Z
date_updated: 2026-03-18T09:07:10Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
keyword:
- BMC
- Duroplast
- Kautschuk
- Mehrkomponenten
- Spritzgießen
language:
- iso: eng
page: 227–228
publication: International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract
book
quality_controlled: '1'
status: public
title: 'Thermoset–Rubber 2K Composite Systems: Material Combinations and Interfacial
Reactions in a One-Step Injection Molding Process'
type: book_chapter
user_id: '59363'
year: '2025'
...
---
_id: '65007'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Knaup F, Schöppner V. Improvement of a numerical two-phase simulation model
for single-screw plasticizing extruders based on experimental investigations.
International Polymer Processing. Published online 2025. doi:10.1515/ipp-2025-0072
apa: Knaup, F., & Schöppner, V. (2025). Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations. International Polymer Processing. https://doi.org/10.1515/ipp-2025-0072
bibtex: '@article{Knaup_Schöppner_2025, title={Improvement of a numerical two-phase
simulation model for single-screw plasticizing extruders based on experimental
investigations}, DOI={10.1515/ipp-2025-0072},
journal={International Polymer Processing}, author={Knaup, Felix and Schöppner,
Volker}, year={2025} }'
chicago: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase
Simulation Model for Single-Screw Plasticizing Extruders Based on Experimental
Investigations.” International Polymer Processing, 2025. https://doi.org/10.1515/ipp-2025-0072.
ieee: 'F. Knaup and V. Schöppner, “Improvement of a numerical two-phase simulation
model for single-screw plasticizing extruders based on experimental investigations,”
International Polymer Processing, 2025, doi: 10.1515/ipp-2025-0072.'
mla: Knaup, Felix, and Volker Schöppner. “Improvement of a Numerical Two-Phase Simulation
Model for Single-Screw Plasticizing Extruders Based on Experimental Investigations.”
International Polymer Processing, 2025, doi:10.1515/ipp-2025-0072.
short: F. Knaup, V. Schöppner, International Polymer Processing (2025).
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:17:45Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: 10.1515/ipp-2025-0072
keyword:
- CFD simulation
- melting modeling
- melting process
- polymer extrusion
- single-screw extruder
language:
- iso: eng
publication: International Polymer Processing
quality_controlled: '1'
status: public
title: Improvement of a numerical two-phase simulation model for single-screw plasticizing
extruders based on experimental investigations
type: journal_article
user_id: '59363'
year: '2025'
...
---
_id: '65005'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Florian
full_name: Brüning, Florian
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knaup F, Brüning F, Schöppner V. Improving an Analytical Model of Melting
in Single Screw Extruders considering the Delay Zone Length. In: Annual Technical
Conference of the Society of Plastics Engineers (ANTEC 2025). ; 2025.'
apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length.
Annual Technical Conference of the Society of Plastics Engineers (ANTEC 2025).
bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Improving an Analytical
Model of Melting in Single Screw Extruders considering the Delay Zone Length},
booktitle={Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)}, author={Knaup, Felix and Brüning, Florian and Schöppner, Volker}, year={2025}
}'
chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Improving an Analytical
Model of Melting in Single Screw Extruders Considering the Delay Zone Length.”
In Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025), 2025.
ieee: F. Knaup, F. Brüning, and V. Schöppner, “Improving an Analytical Model of
Melting in Single Screw Extruders considering the Delay Zone Length,” 2025.
mla: Knaup, Felix, et al. “Improving an Analytical Model of Melting in Single Screw
Extruders Considering the Delay Zone Length.” Annual Technical Conference of
the Society of Plastics Engineers (ANTEC 2025), 2025.
short: 'F. Knaup, F. Brüning, V. Schöppner, in: Annual Technical Conference of the
Society of Plastics Engineers (ANTEC 2025), 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:23:35Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Aufschmelzen
- Aufschmelzmodellierung
- delay zone
- extrusion
- melting modeling
language:
- iso: eng
publication: Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2025)
quality_controlled: '1'
status: public
title: Improving an Analytical Model of Melting in Single Screw Extruders considering
the Delay Zone Length
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65006'
author:
- first_name: Felix
full_name: Knaup, Felix
id: '45124'
last_name: Knaup
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knaup F, Brüning F, Schöppner V. Bestimmung der Feststoffbettfestigkeit zur
Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. In: Technomer
2025 29. Fachtagung. ; 2025.'
apa: Knaup, F., Brüning, F., & Schöppner, V. (2025). Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder. Technomer
2025 29. Fachtagung.
bibtex: '@inproceedings{Knaup_Brüning_Schöppner_2025, title={Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder}, booktitle={Technomer
2025 29. Fachtagung}, author={Knaup, Felix and Brüning, Florian and Schöppner,
Volker}, year={2025} }'
chicago: Knaup, Felix, Florian Brüning, and Volker Schöppner. “Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder.” In Technomer
2025 29. Fachtagung, 2025.
ieee: F. Knaup, F. Brüning, and V. Schöppner, “Bestimmung der Feststoffbettfestigkeit
zur Vorhersage von Feststoffbettbrüchen im Einschneckenextruder,” 2025.
mla: Knaup, Felix, et al. “Bestimmung der Feststoffbettfestigkeit zur Vorhersage
von Feststoffbettbrüchen im Einschneckenextruder.” Technomer 2025 29. Fachtagung,
2025.
short: 'F. Knaup, F. Brüning, V. Schöppner, in: Technomer 2025 29. Fachtagung, 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:11:44Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
keyword:
- Aufschmelzen
- Aufschmelzmodellierung
- Feststoffbett
- melting modeling
language:
- iso: ger
publication: Technomer 2025 29. Fachtagung
publication_identifier:
isbn:
- 978-3-939382-17-1
status: public
title: Bestimmung der Feststoffbettfestigkeit zur Vorhersage von Feststoffbettbrüchen
im Einschneckenextruder
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65003'
author:
- first_name: Dennis
full_name: Kleinschmidt, Dennis
id: '40516'
last_name: Kleinschmidt
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Kleinschmidt D, Schöppner V. Characterization of the wall slip behavior of
filled rubber compounds considering the critical wall shear stress. In: Gummitekniska
Förening S, ed. RubberCon 2025. ; 2025.'
apa: Kleinschmidt, D., & Schöppner, V. (2025). Characterization of the wall
slip behavior of filled rubber compounds considering the critical wall shear stress.
In S. Gummitekniska Förening (Ed.), RubberCon 2025.
bibtex: '@inproceedings{Kleinschmidt_Schöppner_2025, title={Characterization of
the wall slip behavior of filled rubber compounds considering the critical wall
shear stress}, booktitle={RubberCon 2025}, author={Kleinschmidt, Dennis and Schöppner,
Volker}, editor={Gummitekniska Förening, Sveriges}, year={2025} }'
chicago: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall
Slip Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.”
In RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025.
ieee: D. Kleinschmidt and V. Schöppner, “Characterization of the wall slip behavior
of filled rubber compounds considering the critical wall shear stress,” in RubberCon
2025, 2025.
mla: Kleinschmidt, Dennis, and Volker Schöppner. “Characterization of the Wall Slip
Behavior of Filled Rubber Compounds Considering the Critical Wall Shear Stress.”
RubberCon 2025, edited by Sveriges Gummitekniska Förening, 2025.
short: 'D. Kleinschmidt, V. Schöppner, in: S. Gummitekniska Förening (Ed.), RubberCon
2025, 2025.'
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:10:31Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
editor:
- first_name: Sveriges
full_name: Gummitekniska Förening, Sveriges
last_name: Gummitekniska Förening
keyword:
- Kautschuk
- Rheologie
- Wandgleiten
language:
- iso: eng
publication: RubberCon 2025
status: public
title: Characterization of the wall slip behavior of filled rubber compounds considering
the critical wall shear stress
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65009'
author:
- first_name: Leon
full_name: Schmidt, Leon
id: '63035'
last_name: Schmidt
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: 'Schmidt L, Schöppner V, Brüning F. Findings on pinless screw design for rubber
extrusion. In: Gummitekniska Förening S, Swedish N and F rubber associations,
eds. RubberCon 2025. ; 2025.'
apa: Schmidt, L., Schöppner, V., & Brüning, F. (2025). Findings on pinless screw
design for rubber extrusion. In S. Gummitekniska Förening & N. and F. rubber
associations Swedish (Eds.), RubberCon 2025.
bibtex: '@inproceedings{Schmidt_Schöppner_Brüning_2025, title={Findings on pinless
screw design for rubber extrusion}, booktitle={RubberCon 2025}, author={Schmidt,
Leon and Schöppner, Volker and Brüning, Florian}, editor={Gummitekniska Förening,
Sveriges and Swedish, Norwegian and Finnish rubber associations}, year={2025}
}'
chicago: Schmidt, Leon, Volker Schöppner, and Florian Brüning. “Findings on Pinless
Screw Design for Rubber Extrusion.” In RubberCon 2025, edited by Sveriges
Gummitekniska Förening and Norwegian and Finnish rubber associations Swedish,
2025.
ieee: L. Schmidt, V. Schöppner, and F. Brüning, “Findings on pinless screw design
for rubber extrusion,” in RubberCon 2025, 2025.
mla: Schmidt, Leon, et al. “Findings on Pinless Screw Design for Rubber Extrusion.”
RubberCon 2025, edited by Sveriges Gummitekniska Förening and Norwegian
and Finnish rubber associations Swedish, 2025.
short: 'L. Schmidt, V. Schöppner, F. Brüning, in: S. Gummitekniska Förening, N.
and F. rubber associations Swedish (Eds.), RubberCon 2025, 2025.'
date_created: 2026-03-16T14:23:35Z
date_updated: 2026-03-18T09:08:34Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
editor:
- first_name: Sveriges
full_name: Gummitekniska Förening, Sveriges
last_name: Gummitekniska Förening
- first_name: Norwegian and Finnish rubber associations
full_name: Swedish, Norwegian and Finnish rubber associations
last_name: Swedish
keyword:
- extrusion
- Kautschuk
- Simulation
language:
- iso: eng
publication: RubberCon 2025
status: public
title: Findings on pinless screw design for rubber extrusion
type: conference
user_id: '59363'
year: '2025'
...
---
_id: '65008'
author:
- first_name: Leon
full_name: Schmidt, Leon
id: '63035'
last_name: Schmidt
- first_name: Florian
full_name: Brüning, Florian
id: '72920'
last_name: Brüning
citation:
ama: Schmidt L, Brüning F. Investigation of alternative pinless screw concepts for
rubber extrusion. KGK - Kautschuk Gummi Kunststoffe. 2025;78. Jahrgang(2/25):34–40.
apa: Schmidt, L., & Brüning, F. (2025). Investigation of alternative pinless
screw concepts for rubber extrusion. KGK - Kautschuk Gummi Kunststoffe,
78. Jahrgang(2/25), 34–40.
bibtex: '@article{Schmidt_Brüning_2025, title={Investigation of alternative pinless
screw concepts for rubber extrusion}, volume={78. Jahrgang}, number={2/25}, journal={KGK
- Kautschuk Gummi Kunststoffe}, author={Schmidt, Leon and Brüning, Florian}, year={2025},
pages={34–40} }'
chicago: 'Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless
Screw Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe
78. Jahrgang, no. 2/25 (2025): 34–40.'
ieee: L. Schmidt and F. Brüning, “Investigation of alternative pinless screw concepts
for rubber extrusion,” KGK - Kautschuk Gummi Kunststoffe, vol. 78. Jahrgang,
no. 2/25, pp. 34–40, 2025.
mla: Schmidt, Leon, and Florian Brüning. “Investigation of Alternative Pinless Screw
Concepts for Rubber Extrusion.” KGK - Kautschuk Gummi Kunststoffe, vol.
78. Jahrgang, no. 2/25, 2025, pp. 34–40.
short: L. Schmidt, F. Brüning, KGK - Kautschuk Gummi Kunststoffe 78. Jahrgang (2025)
34–40.
date_created: 2026-03-16T14:23:34Z
date_updated: 2026-03-18T09:23:12Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
issue: 2/25
keyword:
- extrusion
- Kautschuk
language:
- iso: eng
page: 34–40
publication: KGK - Kautschuk Gummi Kunststoffe
status: public
title: Investigation of alternative pinless screw concepts for rubber extrusion
type: journal_article
user_id: '59363'
volume: 78. Jahrgang
year: '2025'
...