---
_id: '22434'
abstract:
- lang: eng
text: This paper reports on the experimental development and the theoretical analysis
of the scanning laser epitaxy (SLE) process that is currently being investigated
and developed at the Georgia Institute of Technology. SLE is a laser-based manufacturing
process for deposition of equiaxed, directionally solidified and single-crystal
nickel superalloys onto superalloy substrates through the selective melting and
re-solidification of superalloy powders. The thermal modeling of the system, done
in a commercial CFD software package, simulates a heat source moving over a powder
bed and considers the approximate change in the property values for consolidating
CMSX-4 nickel superalloy powder. The theoretical melt depth is obtained from the
melting temperature criteria and the resulting plots are presented alongside matching
experimental micrographs obtained through cross-sectional metallography. The influence
of the processing parameters on the microstructural evolution, as evidenced through
observations made from the micrographs, is discussed. This work is sponsored by
the Office of Naval Research, through grants N00173-07-1-G031 and N00014-10-1-0526.
author:
- first_name: Johannes
full_name: Tominski, Johannes
last_name: Tominski
- first_name: Stefan
full_name: Lammers, Stefan
id: '13835'
last_name: Lammers
- first_name: Christian
full_name: Wulf, Christian
last_name: Wulf
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Tominski J, Lammers S, Wulf C, Zimmer D. Method for a Software-based Design
Check of Additively Manufactured Components. In: 29th Annual International
Solid Freeform Fabrication Symposium. Vol 29. ; 2018. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf'
apa: Tominski, J., Lammers, S., Wulf, C., & Zimmer, D. (2018). Method for a
Software-based Design Check of Additively Manufactured Components. In 29th
Annual International Solid Freeform Fabrication Symposium (Vol. 29). http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
bibtex: '@inproceedings{Tominski_Lammers_Wulf_Zimmer_2018, title={Method for a Software-based
Design Check of Additively Manufactured Components}, volume={29}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf},
booktitle={29th Annual International Solid Freeform Fabrication Symposium}, author={Tominski,
Johannes and Lammers, Stefan and Wulf, Christian and Zimmer, Detmar}, year={2018}
}'
chicago: Tominski, Johannes, Stefan Lammers, Christian Wulf, and Detmar Zimmer.
“Method for a Software-Based Design Check of Additively Manufactured Components.”
In 29th Annual International Solid Freeform Fabrication Symposium, Vol.
29, 2018. http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
ieee: J. Tominski, S. Lammers, C. Wulf, and D. Zimmer, “Method for a Software-based
Design Check of Additively Manufactured Components,” in 29th Annual International
Solid Freeform Fabrication Symposium, 2018, vol. 29.
mla: Tominski, Johannes, et al. “Method for a Software-Based Design Check of Additively
Manufactured Components.” 29th Annual International Solid Freeform Fabrication
Symposium, vol. 29, 2018, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf.
short: 'J. Tominski, S. Lammers, C. Wulf, D. Zimmer, in: 29th Annual International
Solid Freeform Fabrication Symposium, 2018.'
date_created: 2021-06-15T11:10:06Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2018/006%20MethodforaSoftwareBasedDesignCheckofAdditi.pdf
intvolume: ' 29'
language:
- iso: eng
publication: 29th Annual International Solid Freeform Fabrication Symposium
status: public
title: Method for a Software-based Design Check of Additively Manufactured Components
type: conference
user_id: '38077'
volume: 29
year: '2018'
...
---
_id: '22435'
abstract:
- lang: eng
text: In der Industrie entsteht aufgrund des dynamischen Wettbewerbsumfelds ein
zunehmender Drang nach verkürzten Produktentstehungszeiten, hoher Funktionsintegration
und individualisierten Produkten. Mithin erlangen additive Fertigungsverfahren
eine zunehmende industrielle Bedeutung. Das Laser-Strahlschmelzen (LBM) als additives
Verfahren ist hierbei beispielhaft hervorzuheben, da es bereits im Bereich des
Prototypenbaus und der Kleinserienfertigung ein etabliertes Verfahren ist, das
an der Schwelle zum Einsatz in der Serienproduktion steht. Entscheidendes Hemmnis
für den Einsatz der additiven Fertigungsverfahren bildet die fehlende methodische
Ausnutzung der gestalterischen Freiheiten und Randbedingungen durch die vergleichsweise
neuartige Gruppe an Fertigungsverfahren im gesamten Produktentstehungsprozess.
In der Produktentwicklung bildet die Konstruktionsmethodik einen möglichen Ansatz,
um gestalterische Freiheiten und Vorteile additiver Fertigungsverfahren bereits
in frühen Phasen der Entwicklung gezielt zu berücksichtigen. Hierfür werden aufgrund
bestehender und allgemein anerkannter Konstruktionsmethoden (z.B. VDI2221, Pahl/Beitz,
etc.) Anknüpfungspunkte aufgezeigt, die eine Implementierung, speziell des Laser-Strahlschmelzens,
ermöglichen. Besonderes Augenmerk wird in dieser Veröffentlichung auf die beiden
Konstruktionsphasen Konzeption und Gestaltung gelegt. Hierzu werden Ergänzungen
oder Anpassungen der bestehenden Konstruktionsmethoden vorgestellt. In besonderer
Weise wird dabei auf die Einbringung und die Vorteile der additiven Fertigungsverfahren
eingegangen.
author:
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Sonja
full_name: Bücker, Sonja
last_name: Bücker
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Künneke T, Bücker S, Lieneke T, Zimmer D. Ein Beitrag zur Anpassung bestehender
Konstruktionsmethodiken an die additiven Fertigungsverfahren. In: Proceedings
of the 15th Rapid.Tech Conference. Carl Hanser Verlag GmbH & Co. KG; 2018:128-143.
doi:10.3139/9783446458123.008'
apa: Künneke, T., Bücker, S., Lieneke, T., & Zimmer, D. (2018). Ein Beitrag
zur Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren.
In Proceedings of the 15th Rapid.Tech Conference (pp. 128–143). Carl Hanser
Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446458123.008
bibtex: '@inproceedings{Künneke_Bücker_Lieneke_Zimmer_2018, title={Ein Beitrag zur
Anpassung bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren},
DOI={10.3139/9783446458123.008},
booktitle={Proceedings of the 15th Rapid.Tech Conference}, publisher={Carl Hanser
Verlag GmbH & Co. KG}, author={Künneke, Thomas and Bücker, Sonja and Lieneke,
Tobias and Zimmer, Detmar}, year={2018}, pages={128–143} }'
chicago: Künneke, Thomas, Sonja Bücker, Tobias Lieneke, and Detmar Zimmer. “Ein
Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken an Die Additiven Fertigungsverfahren.”
In Proceedings of the 15th Rapid.Tech Conference, 128–43. Carl Hanser Verlag
GmbH & Co. KG, 2018. https://doi.org/10.3139/9783446458123.008.
ieee: T. Künneke, S. Bücker, T. Lieneke, and D. Zimmer, “Ein Beitrag zur Anpassung
bestehender Konstruktionsmethodiken an die additiven Fertigungsverfahren,” in
Proceedings of the 15th Rapid.Tech Conference, 2018, pp. 128–143.
mla: Künneke, Thomas, et al. “Ein Beitrag Zur Anpassung Bestehender Konstruktionsmethodiken
an Die Additiven Fertigungsverfahren.” Proceedings of the 15th Rapid.Tech Conference,
Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–43, doi:10.3139/9783446458123.008.
short: 'T. Künneke, S. Bücker, T. Lieneke, D. Zimmer, in: Proceedings of the 15th
Rapid.Tech Conference, Carl Hanser Verlag GmbH & Co. KG, 2018, pp. 128–143.'
date_created: 2021-06-15T11:10:08Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446458123.008
language:
- iso: eng
page: 128-143
publication: Proceedings of the 15th Rapid.Tech Conference
publication_identifier:
isbn:
- 978-3-446-45812-3
publisher: Carl Hanser Verlag GmbH & Co. KG
status: public
title: Ein Beitrag zur Anpassung bestehender Konstruktionsmethodiken an die additiven
Fertigungsverfahren
type: conference
user_id: '38077'
year: '2018'
...
---
_id: '22436'
abstract:
- lang: eng
text: Die Additive Fertigung eröffnet neue Freiheitsgrade in der Produktentwicklung.
Unsicherheiten über die Wirtschaftlichkeit und Leistungsfähigkeit der aus der
Konstruktion ableitbaren Fertigungstechnologieketten sind zu beachten. In diesem
Beitrag wird eine Methode vorgestellt, welche die Anpassung einer bestehenden
Konstruktionsmethode berücksichtigt und eine iterative Bewertung der Konstruktionsentscheidungen
anhand von Technologieketten ermöglicht. Hiermit können die Potenziale der additiven
Fertigungstechnologien zielgerichtet realisiert werden.
author:
- first_name: Alexander
full_name: Jacob, Alexander
last_name: Jacob
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Tobias
full_name: Baumann, Tobias
last_name: Baumann
- first_name: Nicole
full_name: Stricker, Nicole
last_name: Stricker
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Gisela
full_name: Lanza, Gisela
last_name: Lanza
citation:
ama: Jacob A, Künneke T, Lieneke T, et al. Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb.
2018;113(11):742-745. doi:https://doi.org/10.3139/104.112005
apa: Jacob, A., Künneke, T., Lieneke, T., Baumann, T., Stricker, N., Zimmer, D.,
& Lanza, G. (2018). Iterative Produktentwicklung und Produktionsplanung für
die Additive Fertigung. ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
113(11), 742–745. https://doi.org/10.3139/104.112005
bibtex: '@article{Jacob_Künneke_Lieneke_Baumann_Stricker_Zimmer_Lanza_2018, title={Iterative
Produktentwicklung und Produktionsplanung für die Additive Fertigung}, volume={113},
DOI={https://doi.org/10.3139/104.112005},
number={11}, journal={ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb}, publisher={Carl
Hanser Verlag}, author={Jacob, Alexander and Künneke, Thomas and Lieneke, Tobias
and Baumann, Tobias and Stricker, Nicole and Zimmer, Detmar and Lanza, Gisela},
year={2018}, pages={742–745} }'
chicago: 'Jacob, Alexander, Thomas Künneke, Tobias Lieneke, Tobias Baumann, Nicole
Stricker, Detmar Zimmer, and Gisela Lanza. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb
113, no. 11 (2018): 742–45. https://doi.org/10.3139/104.112005.'
ieee: A. Jacob et al., “Iterative Produktentwicklung und Produktionsplanung
für die Additive Fertigung,” ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, pp. 742–745, 2018.
mla: Jacob, Alexander, et al. “Iterative Produktentwicklung Und Produktionsplanung
Für Die Additive Fertigung.” ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb,
vol. 113, no. 11, Carl Hanser Verlag, 2018, pp. 742–45, doi:https://doi.org/10.3139/104.112005.
short: A. Jacob, T. Künneke, T. Lieneke, T. Baumann, N. Stricker, D. Zimmer, G.
Lanza, ZWF Zeitschrift Für Wirtschaftlichen Fabrikbetrieb 113 (2018) 742–745.
date_created: 2021-06-15T11:10:09Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: https://doi.org/10.3139/104.112005
intvolume: ' 113'
issue: '11'
language:
- iso: eng
page: 742-745
publication: ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb
publisher: Carl Hanser Verlag
status: public
title: Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung
type: journal_article
user_id: '38077'
volume: 113
year: '2018'
...
---
_id: '22456'
author:
- first_name: Konrad
full_name: Boettcher, Konrad
last_name: Boettcher
- first_name: Mike
full_name: Bothe, Mike
id: '72973'
last_name: Bothe
citation:
ama: Boettcher K, Bothe M. Thin liquid droplet on top of a rotating non-isothermal
liquid layer. PAMM. 2018:653-654. doi:10.1002/pamm.201710295
apa: Boettcher, K., & Bothe, M. (2018). Thin liquid droplet on top of a rotating
non-isothermal liquid layer. PAMM, 653–654. https://doi.org/10.1002/pamm.201710295
bibtex: '@article{Boettcher_Bothe_2018, title={Thin liquid droplet on top of a rotating
non-isothermal liquid layer}, DOI={10.1002/pamm.201710295},
journal={PAMM}, author={Boettcher, Konrad and Bothe, Mike}, year={2018}, pages={653–654}
}'
chicago: Boettcher, Konrad, and Mike Bothe. “Thin Liquid Droplet on Top of a Rotating
Non-Isothermal Liquid Layer.” PAMM, 2018, 653–54. https://doi.org/10.1002/pamm.201710295.
ieee: K. Boettcher and M. Bothe, “Thin liquid droplet on top of a rotating non-isothermal
liquid layer,” PAMM, pp. 653–654, 2018.
mla: Boettcher, Konrad, and Mike Bothe. “Thin Liquid Droplet on Top of a Rotating
Non-Isothermal Liquid Layer.” PAMM, 2018, pp. 653–54, doi:10.1002/pamm.201710295.
short: K. Boettcher, M. Bothe, PAMM (2018) 653–654.
date_created: 2021-06-17T06:53:03Z
date_updated: 2022-01-06T06:55:33Z
department:
- _id: '9'
- _id: '145'
doi: 10.1002/pamm.201710295
language:
- iso: eng
page: 653-654
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publication_status: published
status: public
title: Thin liquid droplet on top of a rotating non-isothermal liquid layer
type: journal_article
user_id: '14931'
year: '2018'
...
---
_id: '22502'
author:
- first_name: Uwe
full_name: Brückner, Uwe
last_name: Brückner
citation:
ama: Brückner U. Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren
Mehrmotorengetriebes. Shaker Verlag GmbH ; 2018. doi:10.2370/9783844063622
apa: Brückner, U. (2018). Entwurf und simulationsgestützte Analyse eines mechanisch
rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH . https://doi.org/10.2370/9783844063622
bibtex: '@book{Brückner_2018, title={Entwurf und simulationsgestützte Analyse eines
mechanisch rekonfigurierbaren Mehrmotorengetriebes}, DOI={10.2370/9783844063622},
publisher={Shaker Verlag GmbH }, author={Brückner, Uwe}, year={2018} }'
chicago: Brückner, Uwe. Entwurf Und Simulationsgestützte Analyse Eines Mechanisch
Rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH , 2018. https://doi.org/10.2370/9783844063622.
ieee: U. Brückner, Entwurf und simulationsgestützte Analyse eines mechanisch
rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH , 2018.
mla: Brückner, Uwe. Entwurf Und Simulationsgestützte Analyse Eines Mechanisch
Rekonfigurierbaren Mehrmotorengetriebes. Shaker Verlag GmbH , 2018, doi:10.2370/9783844063622.
short: U. Brückner, Entwurf Und Simulationsgestützte Analyse Eines Mechanisch Rekonfigurierbaren
Mehrmotorengetriebes, Shaker Verlag GmbH , 2018.
date_created: 2021-06-21T13:34:18Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '146'
doi: 10.2370/9783844063622
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-8440-6362-2
publisher: 'Shaker Verlag GmbH '
status: public
title: Entwurf und simulationsgestützte Analyse eines mechanisch rekonfigurierbaren
Mehrmotorengetriebes
type: dissertation
user_id: '38077'
year: '2018'
...
---
_id: '22503'
author:
- first_name: Malte
full_name: Strop, Malte
last_name: Strop
citation:
ama: Strop M. Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer. Shaker Verlag GmbH ; 2018. doi:10.2370/9783844058789
apa: Strop, M. (2018). Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme
und ihre Anwendung auf Kautschukinnenmischer. Shaker Verlag GmbH . https://doi.org/10.2370/9783844058789
bibtex: '@book{Strop_2018, title={Entwurf einer intelligenten Betriebsstrategie
für Mehrmotorenantriebssysteme und ihre Anwendung auf Kautschukinnenmischer},
DOI={10.2370/9783844058789},
publisher={Shaker Verlag GmbH }, author={Strop, Malte}, year={2018} }'
chicago: Strop, Malte. Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer. Shaker Verlag GmbH , 2018. https://doi.org/10.2370/9783844058789.
ieee: M. Strop, Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme
und ihre Anwendung auf Kautschukinnenmischer. Shaker Verlag GmbH , 2018.
mla: Strop, Malte. Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer. Shaker Verlag GmbH , 2018, doi:10.2370/9783844058789.
short: M. Strop, Entwurf Einer Intelligenten Betriebsstrategie Für Mehrmotorenantriebssysteme
Und Ihre Anwendung Auf Kautschukinnenmischer, Shaker Verlag GmbH , 2018.
date_created: 2021-06-21T13:34:20Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '146'
doi: 10.2370/9783844058789
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-8440-5878-9
publisher: 'Shaker Verlag GmbH '
status: public
title: Entwurf einer intelligenten Betriebsstrategie für Mehrmotorenantriebssysteme
und ihre Anwendung auf Kautschukinnenmischer
type: dissertation
user_id: '38077'
year: '2018'
...
---
_id: '22506'
author:
- first_name: Uwe
full_name: Brückner, Uwe
last_name: Brückner
- first_name: Thomas
full_name: Künneke, Thomas
id: '13226'
last_name: Künneke
- first_name: Magnus Hubert
full_name: Schadomsky, Magnus Hubert
id: '11904'
last_name: Schadomsky
- first_name: Malte
full_name: Strop, Malte
last_name: Strop
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Brückner U, Künneke T, Schadomsky MH, Strop M, Zimmer D. Elektromechanische
Antriebe. Carl Hanser Verlag; 2018:247-290. doi:10.3139/9783446456198.009
apa: Brückner, U., Künneke, T., Schadomsky, M. H., Strop, M., & Zimmer, D. (2018).
Elektromechanische Antriebe (pp. 247–290). Carl Hanser Verlag. https://doi.org/10.3139/9783446456198.009
bibtex: '@book{Brückner_Künneke_Schadomsky_Strop_Zimmer_2018, title={Elektromechanische
Antriebe}, DOI={10.3139/9783446456198.009},
publisher={Carl Hanser Verlag}, author={Brückner, Uwe and Künneke, Thomas and
Schadomsky, Magnus Hubert and Strop, Malte and Zimmer, Detmar}, year={2018}, pages={247–290}
}'
chicago: Brückner, Uwe, Thomas Künneke, Magnus Hubert Schadomsky, Malte Strop, and
Detmar Zimmer. Elektromechanische Antriebe. Carl Hanser Verlag, 2018. https://doi.org/10.3139/9783446456198.009.
ieee: U. Brückner, T. Künneke, M. H. Schadomsky, M. Strop, and D. Zimmer, Elektromechanische
Antriebe. Carl Hanser Verlag, 2018, pp. 247–290.
mla: Brückner, Uwe, et al. Elektromechanische Antriebe. Carl Hanser Verlag,
2018, pp. 247–90, doi:10.3139/9783446456198.009.
short: U. Brückner, T. Künneke, M.H. Schadomsky, M. Strop, D. Zimmer, Elektromechanische
Antriebe, Carl Hanser Verlag, 2018.
date_created: 2021-06-22T13:31:43Z
date_updated: 2022-01-06T06:55:35Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.3139/9783446456198.009
language:
- iso: eng
page: 247-290
publication_identifier:
isbn:
- 978-3-446-45619-8
publisher: Carl Hanser Verlag
status: public
title: Elektromechanische Antriebe
type: book
user_id: '38077'
year: '2018'
...
---
_id: '22984'
author:
- first_name: Christopher
full_name: Lüke, Christopher
id: '22675'
last_name: Lüke
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Jan Henning
full_name: Kessler, Jan Henning
last_name: Kessler
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Lüke C, Timmermann J, Kessler JH, Trächtler A. Intelligente Steuerungen und
Regelungen. In: Steigerung Der Intelligenz Mechatronischer Systeme. Vol
1. Springer Vieweg; 2018:153-192.'
apa: Lüke, C., Timmermann, J., Kessler, J. H., & Trächtler, A. (2018). Intelligente
Steuerungen und Regelungen. In Steigerung der Intelligenz mechatronischer Systeme
(Vol. 1, pp. 153–192). Springer Vieweg.
bibtex: '@inbook{Lüke_Timmermann_Kessler_Trächtler_2018, title={Intelligente Steuerungen
und Regelungen}, volume={1}, booktitle={Steigerung der Intelligenz mechatronischer
Systeme}, publisher={Springer Vieweg}, author={Lüke, Christopher and Timmermann,
Julia and Kessler, Jan Henning and Trächtler, Ansgar}, year={2018}, pages={153–192}
}'
chicago: Lüke, Christopher, Julia Timmermann, Jan Henning Kessler, and Ansgar Trächtler.
“Intelligente Steuerungen Und Regelungen.” In Steigerung Der Intelligenz Mechatronischer
Systeme, 1:153–92. Springer Vieweg, 2018.
ieee: C. Lüke, J. Timmermann, J. H. Kessler, and A. Trächtler, “Intelligente Steuerungen
und Regelungen,” in Steigerung der Intelligenz mechatronischer Systeme,
vol. 1, Springer Vieweg, 2018, pp. 153–192.
mla: Lüke, Christopher, et al. “Intelligente Steuerungen Und Regelungen.” Steigerung
Der Intelligenz Mechatronischer Systeme, vol. 1, Springer Vieweg, 2018, pp.
153–92.
short: 'C. Lüke, J. Timmermann, J.H. Kessler, A. Trächtler, in: Steigerung Der Intelligenz
Mechatronischer Systeme, Springer Vieweg, 2018, pp. 153–192.'
date_created: 2021-08-09T05:39:28Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
intvolume: ' 1'
language:
- iso: eng
page: 153-192
publication: Steigerung der Intelligenz mechatronischer Systeme
publisher: Springer Vieweg
status: public
title: Intelligente Steuerungen und Regelungen
type: book_chapter
user_id: '24876'
volume: 1
year: '2018'
...
---
_id: '22985'
author:
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Trächtler A. Ressourceneffiziente Selbstoptimierende Wäscherei. https://doi.org/10.1007/978-3-662-56390-8:
Springer; 2018.'
apa: 'Trächtler, A. (2018). Ressourceneffiziente Selbstoptimierende Wäscherei.
https://doi.org/10.1007/978-3-662-56390-8: Springer.'
bibtex: '@book{Trächtler_2018, place={https://doi.org/10.1007/978-3-662-56390-8},
series={Springer Verlag}, title={Ressourceneffiziente Selbstoptimierende Wäscherei},
publisher={Springer}, author={Trächtler, Ansgar}, year={2018}, collection={Springer
Verlag} }'
chicago: 'Trächtler, Ansgar. Ressourceneffiziente Selbstoptimierende Wäscherei.
Springer Verlag. https://doi.org/10.1007/978-3-662-56390-8: Springer, 2018.'
ieee: 'A. Trächtler, Ressourceneffiziente Selbstoptimierende Wäscherei. https://doi.org/10.1007/978-3-662-56390-8:
Springer, 2018.'
mla: Trächtler, Ansgar. Ressourceneffiziente Selbstoptimierende Wäscherei.
Springer, 2018.
short: A. Trächtler, Ressourceneffiziente Selbstoptimierende Wäscherei, Springer,
https://doi.org/10.1007/978-3-662-56390-8, 2018.
date_created: 2021-08-09T05:39:29Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
language:
- iso: eng
place: https://doi.org/10.1007/978-3-662-56390-8
publisher: Springer
series_title: Springer Verlag
status: public
title: Ressourceneffiziente Selbstoptimierende Wäscherei
type: book
user_id: '24876'
year: '2018'
...
---
_id: '22986'
author:
- first_name: Nico
full_name: Rüddenklau, Nico
id: '22359'
last_name: Rüddenklau
- first_name: Patrick
full_name: Biemelt, Patrick
id: '24876'
last_name: Biemelt
- first_name: Sven
full_name: Henning, Sven
id: '13195'
last_name: Henning
- first_name: Sandra
full_name: Gausemeier, Sandra
id: '17793'
last_name: Gausemeier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rüddenklau N, Biemelt P, Henning S, Gausemeier S, Trächtler A. Shader-Based
Realtime Simulation of High-Definition Automotive Headlamps. In: SIMUL 2018,
The Tenth International Conference on Advances in System Simulation. IARIA;
2018.'
apa: Rüddenklau, N., Biemelt, P., Henning, S., Gausemeier, S., & Trächtler,
A. (2018). Shader-Based Realtime Simulation of High-Definition Automotive Headlamps.
In SIMUL 2018, The Tenth International Conference on Advances in System Simulation.
IARIA.
bibtex: '@inproceedings{Rüddenklau_Biemelt_Henning_Gausemeier_Trächtler_2018, title={Shader-Based
Realtime Simulation of High-Definition Automotive Headlamps}, booktitle={SIMUL
2018, The Tenth International Conference on Advances in System Simulation}, publisher={IARIA},
author={Rüddenklau, Nico and Biemelt, Patrick and Henning, Sven and Gausemeier,
Sandra and Trächtler, Ansgar}, year={2018} }'
chicago: Rüddenklau, Nico, Patrick Biemelt, Sven Henning, Sandra Gausemeier, and
Ansgar Trächtler. “Shader-Based Realtime Simulation of High-Definition Automotive
Headlamps.” In SIMUL 2018, The Tenth International Conference on Advances in
System Simulation. IARIA, 2018.
ieee: N. Rüddenklau, P. Biemelt, S. Henning, S. Gausemeier, and A. Trächtler, “Shader-Based
Realtime Simulation of High-Definition Automotive Headlamps,” in SIMUL 2018,
The Tenth International Conference on Advances in System Simulation, 2018.
mla: Rüddenklau, Nico, et al. “Shader-Based Realtime Simulation of High-Definition
Automotive Headlamps.” SIMUL 2018, The Tenth International Conference on Advances
in System Simulation, IARIA, 2018.
short: 'N. Rüddenklau, P. Biemelt, S. Henning, S. Gausemeier, A. Trächtler, in:
SIMUL 2018, The Tenth International Conference on Advances in System Simulation,
IARIA, 2018.'
date_created: 2021-08-09T05:39:30Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
language:
- iso: eng
publication: SIMUL 2018, The Tenth International Conference on Advances in System
Simulation
publisher: IARIA
status: public
title: Shader-Based Realtime Simulation of High-Definition Automotive Headlamps
type: conference
user_id: '14931'
year: '2018'
...
---
_id: '22987'
author:
- first_name: Simon
full_name: Drüke, Simon
last_name: Drüke
- first_name: Rainer
full_name: Bicker, Rainer
last_name: Bicker
- first_name: Bernd
full_name: Schullter, Bernd
last_name: Schullter
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Drüke S, Bicker R, Schullter B, Henke C, Trächtler A. Rotordynamic instabilities
in washing machines. In: Proceedings of the 10th International Conference on
Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor Dynamics -
IFToMM. Springer Nature Switzerland AG; 2018:383-397.'
apa: Drüke, S., Bicker, R., Schullter, B., Henke, C., & Trächtler, A. (2018).
Rotordynamic instabilities in washing machines. In Proceedings of the 10th
International Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference
on Rotor Dynamics - IFToMM (pp. 383–397). Springer Nature Switzerland AG.
bibtex: '@inproceedings{Drüke_Bicker_Schullter_Henke_Trächtler_2018, title={Rotordynamic
instabilities in washing machines}, booktitle={Proceedings of the 10th International
Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor
Dynamics - IFToMM}, publisher={Springer Nature Switzerland AG}, author={Drüke,
Simon and Bicker, Rainer and Schullter, Bernd and Henke, Christian and Trächtler,
Ansgar}, year={2018}, pages={383–397} }'
chicago: Drüke, Simon, Rainer Bicker, Bernd Schullter, Christian Henke, and Ansgar
Trächtler. “Rotordynamic Instabilities in Washing Machines.” In Proceedings
of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International
Conference on Rotor Dynamics - IFToMM, 383–97. Springer Nature Switzerland
AG, 2018.
ieee: S. Drüke, R. Bicker, B. Schullter, C. Henke, and A. Trächtler, “Rotordynamic
instabilities in washing machines,” in Proceedings of the 10th International
Conference on Rotor Dynamics - IFToMM. Vol. 2. International Conference on Rotor
Dynamics - IFToMM, 2018, pp. 383–397.
mla: Drüke, Simon, et al. “Rotordynamic Instabilities in Washing Machines.” Proceedings
of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International
Conference on Rotor Dynamics - IFToMM, Springer Nature Switzerland AG, 2018,
pp. 383–97.
short: 'S. Drüke, R. Bicker, B. Schullter, C. Henke, A. Trächtler, in: Proceedings
of the 10th International Conference on Rotor Dynamics - IFToMM. Vol. 2. International
Conference on Rotor Dynamics - IFToMM, Springer Nature Switzerland AG, 2018, pp.
383–397.'
date_created: 2021-08-09T05:39:54Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 383-397
publication: Proceedings of the 10th International Conference on Rotor Dynamics -
IFToMM. Vol. 2. International Conference on Rotor Dynamics - IFToMM
publisher: Springer Nature Switzerland AG
status: public
title: Rotordynamic instabilities in washing machines
type: conference
user_id: '24876'
year: '2018'
...
---
_id: '22988'
author:
- first_name: Manuel
full_name: Gräler, Manuel
last_name: Gräler
- first_name: Robert
full_name: Springer, Robert
last_name: Springer
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
citation:
ama: 'Gräler M, Springer R, Henke C, Trächtler A, Homberg W. Assisted setup of forming
processes: compensation of initial stochastic disturbances. Swedish Production
Symposium. 2018;25:358-364.'
apa: 'Gräler, M., Springer, R., Henke, C., Trächtler, A., & Homberg, W. (2018).
Assisted setup of forming processes: compensation of initial stochastic disturbances.
Swedish Production Symposium, 25, 358–364.'
bibtex: '@article{Gräler_Springer_Henke_Trächtler_Homberg_2018, title={Assisted
setup of forming processes: compensation of initial stochastic disturbances},
volume={25}, journal={Swedish Production Symposium}, author={Gräler, Manuel and
Springer, Robert and Henke, Christian and Trächtler, Ansgar and Homberg, Werner},
year={2018}, pages={358–364} }'
chicago: 'Gräler, Manuel, Robert Springer, Christian Henke, Ansgar Trächtler, and
Werner Homberg. “Assisted Setup of Forming Processes: Compensation of Initial
Stochastic Disturbances.” Swedish Production Symposium 25 (2018): 358–64.'
ieee: 'M. Gräler, R. Springer, C. Henke, A. Trächtler, and W. Homberg, “Assisted
setup of forming processes: compensation of initial stochastic disturbances,”
Swedish Production Symposium, vol. 25, pp. 358–364, 2018.'
mla: 'Gräler, Manuel, et al. “Assisted Setup of Forming Processes: Compensation
of Initial Stochastic Disturbances.” Swedish Production Symposium, vol.
25, 2018, pp. 358–64.'
short: M. Gräler, R. Springer, C. Henke, A. Trächtler, W. Homberg, Swedish Production
Symposium 25 (2018) 358–364.
date_created: 2021-08-09T05:39:55Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 25'
language:
- iso: eng
page: 358-364
publication: Swedish Production Symposium
status: public
title: 'Assisted setup of forming processes: compensation of initial stochastic disturbances'
type: journal_article
user_id: '24876'
volume: 25
year: '2018'
...
---
_id: '22989'
author:
- first_name: Arne Thorsten
full_name: Rüting, Arne Thorsten
last_name: Rüting
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rüting AT, Henke C, Trächtler A. Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung
auf einer Industriesteuerung. In: EKA 2018 Entwurf Komplexer Automatisierungssysteme
- Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen. IFAK - Institut
für Automation und Kommunikation e.V.; 2018.'
apa: Rüting, A. T., Henke, C., & Trächtler, A. (2018). Umsetzung einer echtzeitfähigen
Mehrgrößenoptimierung auf einer Industriesteuerung. In EKA 2018 Entwurf komplexer
Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen.
IFAK - Institut für Automation und Kommunikation e.V.
bibtex: '@inproceedings{Rüting_Henke_Trächtler_2018, title={Umsetzung einer echtzeitfähigen
Mehrgrößenoptimierung auf einer Industriesteuerung}, booktitle={EKA 2018 Entwurf
komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und
Anwendungen}, publisher={IFAK - Institut für Automation und Kommunikation e.V.},
author={Rüting, Arne Thorsten and Henke, Christian and Trächtler, Ansgar}, year={2018}
}'
chicago: Rüting, Arne Thorsten, Christian Henke, and Ansgar Trächtler. “Umsetzung
Einer Echtzeitfähigen Mehrgrößenoptimierung Auf Einer Industriesteuerung.” In
EKA 2018 Entwurf Komplexer Automatisierungssysteme - Beschreibungsmittel, Methoden,
Werkzeuge Und Anwendungen. IFAK - Institut für Automation und Kommunikation
e.V., 2018.
ieee: A. T. Rüting, C. Henke, and A. Trächtler, “Umsetzung einer echtzeitfähigen
Mehrgrößenoptimierung auf einer Industriesteuerung,” in EKA 2018 Entwurf komplexer
Automatisierungssysteme - Beschreibungsmittel, Methoden, Werkzeuge und Anwendungen,
2018.
mla: Rüting, Arne Thorsten, et al. “Umsetzung Einer Echtzeitfähigen Mehrgrößenoptimierung
Auf Einer Industriesteuerung.” EKA 2018 Entwurf Komplexer Automatisierungssysteme
- Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen, IFAK - Institut
für Automation und Kommunikation e.V., 2018.
short: 'A.T. Rüting, C. Henke, A. Trächtler, in: EKA 2018 Entwurf Komplexer Automatisierungssysteme
- Beschreibungsmittel, Methoden, Werkzeuge Und Anwendungen, IFAK - Institut für
Automation und Kommunikation e.V., 2018.'
date_created: 2021-08-09T05:39:57Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: EKA 2018 Entwurf komplexer Automatisierungssysteme - Beschreibungsmittel,
Methoden, Werkzeuge und Anwendungen
publisher: IFAK - Institut für Automation und Kommunikation e.V.
status: public
title: Umsetzung einer echtzeitfähigen Mehrgrößenoptimierung auf einer Industriesteuerung
type: conference
user_id: '24876'
year: '2018'
...
---
_id: '22990'
author:
- first_name: Robert
full_name: Springer, Robert
last_name: Springer
- first_name: Manuel
full_name: Graeler, Manuel
last_name: Graeler
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Springer R, Graeler M, Homberg W, Henke C, Trächtler A. Model based Setup Assistant
for Progressive Tools. AIP Conference Proceedings. 2018;160025(2018).
apa: Springer, R., Graeler, M., Homberg, W., Henke, C., & Trächtler, A. (2018).
Model based Setup Assistant for Progressive Tools. AIP Conference Proceedings,
160025(2018).
bibtex: '@article{Springer_Graeler_Homberg_Henke_Trächtler_2018, title={Model based
Setup Assistant for Progressive Tools}, volume={160025}, number={2018}, journal={AIP
Conference Proceedings}, author={Springer, Robert and Graeler, Manuel and Homberg,
Werner and Henke, Christian and Trächtler, Ansgar}, year={2018} }'
chicago: Springer, Robert, Manuel Graeler, Werner Homberg, Christian Henke, and
Ansgar Trächtler. “Model Based Setup Assistant for Progressive Tools.” AIP
Conference Proceedings 160025, no. 2018 (2018).
ieee: R. Springer, M. Graeler, W. Homberg, C. Henke, and A. Trächtler, “Model based
Setup Assistant for Progressive Tools,” AIP Conference Proceedings, vol.
160025, no. 2018, 2018.
mla: Springer, Robert, et al. “Model Based Setup Assistant for Progressive Tools.”
AIP Conference Proceedings, vol. 160025, no. 2018, 2018.
short: R. Springer, M. Graeler, W. Homberg, C. Henke, A. Trächtler, AIP Conference
Proceedings 160025 (2018).
date_created: 2021-08-09T05:39:58Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 160025'
issue: '2018'
language:
- iso: eng
publication: AIP Conference Proceedings
status: public
title: Model based Setup Assistant for Progressive Tools
type: journal_article
user_id: '24876'
volume: 160025
year: '2018'
...
---
_id: '22992'
author:
- first_name: Sven
full_name: Henning, Sven
id: '13195'
last_name: Henning
- first_name: Patrick
full_name: Biemelt, Patrick
id: '24876'
last_name: Biemelt
- first_name: Nico
full_name: Rüddenklau, Nico
id: '22359'
last_name: Rüddenklau
- first_name: Sandra
full_name: Gausemeier, Sandra
id: '17793'
last_name: Gausemeier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Henning S, Biemelt P, Rüddenklau N, Gausemeier S, Trächtler A. A Simulation
Framework for Testing a Conceptual Hierarchical Autonomous Traffic Management
System including an Intelligent External Traffic Simulation. In: Proceedings
of the DSC 2018 Europe VR: New Trends in Human in the Loop Simulation and Testing.
Driving Simulation and VR. Driving Simulation Association; 2018:91-98.'
apa: 'Henning, S., Biemelt, P., Rüddenklau, N., Gausemeier, S., & Trächtler,
A. (2018). A Simulation Framework for Testing a Conceptual Hierarchical Autonomous
Traffic Management System including an Intelligent External Traffic Simulation.
In Proceedings of the DSC 2018 Europe VR: New trends in Human in the Loop simulation
and testing. Driving simulation and VR (pp. 91–98). Driving Simulation Association.'
bibtex: '@inproceedings{Henning_Biemelt_Rüddenklau_Gausemeier_Trächtler_2018, title={A
Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic
Management System including an Intelligent External Traffic Simulation}, booktitle={Proceedings
of the DSC 2018 Europe VR: New trends in Human in the Loop simulation and testing.
Driving simulation and VR}, publisher={Driving Simulation Association}, author={Henning,
Sven and Biemelt, Patrick and Rüddenklau, Nico and Gausemeier, Sandra and Trächtler,
Ansgar}, year={2018}, pages={91–98} }'
chicago: 'Henning, Sven, Patrick Biemelt, Nico Rüddenklau, Sandra Gausemeier, and
Ansgar Trächtler. “A Simulation Framework for Testing a Conceptual Hierarchical
Autonomous Traffic Management System Including an Intelligent External Traffic
Simulation.” In Proceedings of the DSC 2018 Europe VR: New Trends in Human
in the Loop Simulation and Testing. Driving Simulation and VR, 91–98. Driving
Simulation Association, 2018.'
ieee: 'S. Henning, P. Biemelt, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “A
Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic
Management System including an Intelligent External Traffic Simulation,” in Proceedings
of the DSC 2018 Europe VR: New trends in Human in the Loop simulation and testing.
Driving simulation and VR, 2018, pp. 91–98.'
mla: 'Henning, Sven, et al. “A Simulation Framework for Testing a Conceptual Hierarchical
Autonomous Traffic Management System Including an Intelligent External Traffic
Simulation.” Proceedings of the DSC 2018 Europe VR: New Trends in Human in
the Loop Simulation and Testing. Driving Simulation and VR, Driving Simulation
Association, 2018, pp. 91–98.'
short: 'S. Henning, P. Biemelt, N. Rüddenklau, S. Gausemeier, A. Trächtler, in:
Proceedings of the DSC 2018 Europe VR: New Trends in Human in the Loop Simulation
and Testing. Driving Simulation and VR, Driving Simulation Association, 2018,
pp. 91–98.'
date_created: 2021-08-09T05:40:21Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
language:
- iso: eng
page: 91-98
publication: 'Proceedings of the DSC 2018 Europe VR: New trends in Human in the Loop
simulation and testing. Driving simulation and VR'
publisher: Driving Simulation Association
status: public
title: A Simulation Framework for Testing a Conceptual Hierarchical Autonomous Traffic
Management System including an Intelligent External Traffic Simulation
type: conference
user_id: '14931'
year: '2018'
...
---
_id: '22994'
author:
- first_name: Christopher
full_name: Lankeit, Christopher
last_name: Lankeit
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Lankeit C, Michael J, Henke C, Trächtler A. Holistic Requirements for Interdisciplinary
Development Processes. In: Proceedings 1st International Workshop on Learning
from Other Disciplines for Requirements Engineering. IEEE; 2018:4-7.'
apa: Lankeit, C., Michael, J., Henke, C., & Trächtler, A. (2018). Holistic Requirements
for Interdisciplinary Development Processes. In Proceedings 1st International
Workshop on Learning from other Disciplines for Requirements Engineering (pp.
4–7). IEEE.
bibtex: '@inproceedings{Lankeit_Michael_Henke_Trächtler_2018, title={Holistic Requirements
for Interdisciplinary Development Processes}, booktitle={Proceedings 1st International
Workshop on Learning from other Disciplines for Requirements Engineering}, publisher={IEEE},
author={Lankeit, Christopher and Michael, Jan and Henke, Christian and Trächtler,
Ansgar}, year={2018}, pages={4–7} }'
chicago: Lankeit, Christopher, Jan Michael, Christian Henke, and Ansgar Trächtler.
“Holistic Requirements for Interdisciplinary Development Processes.” In Proceedings
1st International Workshop on Learning from Other Disciplines for Requirements
Engineering, 4–7. IEEE, 2018.
ieee: C. Lankeit, J. Michael, C. Henke, and A. Trächtler, “Holistic Requirements
for Interdisciplinary Development Processes,” in Proceedings 1st International
Workshop on Learning from other Disciplines for Requirements Engineering,
2018, pp. 4–7.
mla: Lankeit, Christopher, et al. “Holistic Requirements for Interdisciplinary Development
Processes.” Proceedings 1st International Workshop on Learning from Other Disciplines
for Requirements Engineering, IEEE, 2018, pp. 4–7.
short: 'C. Lankeit, J. Michael, C. Henke, A. Trächtler, in: Proceedings 1st International
Workshop on Learning from Other Disciplines for Requirements Engineering, IEEE,
2018, pp. 4–7.'
date_created: 2021-08-09T05:40:24Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 4-7
publication: Proceedings 1st International Workshop on Learning from other Disciplines
for Requirements Engineering
publisher: IEEE
status: public
title: Holistic Requirements for Interdisciplinary Development Processes
type: conference
user_id: '24876'
year: '2018'
...
---
_id: '22995'
author:
- first_name: Arathi
full_name: Pai, Arathi
last_name: Pai
- first_name: Markus
full_name: Riepold, Markus
last_name: Riepold
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Pai A, Riepold M, Trächtler A. Model-based precision position and force control
of SMA actuators with a clamping application. Mechatronics. 2018;50:303-320.
apa: Pai, A., Riepold, M., & Trächtler, A. (2018). Model-based precision position
and force control of SMA actuators with a clamping application. Mechatronics,
50, 303–320.
bibtex: '@article{Pai_Riepold_Trächtler_2018, title={Model-based precision position
and force control of SMA actuators with a clamping application}, volume={50},
journal={Mechatronics}, author={Pai, Arathi and Riepold, Markus and Trächtler,
Ansgar}, year={2018}, pages={303–320} }'
chicago: 'Pai, Arathi, Markus Riepold, and Ansgar Trächtler. “Model-Based Precision
Position and Force Control of SMA Actuators with a Clamping Application.” Mechatronics
50 (2018): 303–20.'
ieee: A. Pai, M. Riepold, and A. Trächtler, “Model-based precision position and
force control of SMA actuators with a clamping application,” Mechatronics,
vol. 50, pp. 303–320, 2018.
mla: Pai, Arathi, et al. “Model-Based Precision Position and Force Control of SMA
Actuators with a Clamping Application.” Mechatronics, vol. 50, 2018, pp.
303–20.
short: A. Pai, M. Riepold, A. Trächtler, Mechatronics 50 (2018) 303–320.
date_created: 2021-08-09T05:41:37Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 50'
language:
- iso: eng
page: 303-320
publication: Mechatronics
status: public
title: Model-based precision position and force control of SMA actuators with a clamping
application
type: journal_article
user_id: '24876'
volume: 50
year: '2018'
...
---
_id: '22997'
author:
- first_name: Simon
full_name: Olma, Simon
last_name: Olma
- first_name: Andreas
full_name: Kohlstedt, Andreas
last_name: Kohlstedt
- first_name: Phillip
full_name: Traphöner, Phillip
id: '27484'
last_name: Traphöner
- first_name: Karl-Peter
full_name: Jäker, Karl-Peter
last_name: Jäker
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Olma S, Kohlstedt A, Traphöner P, Jäker K-P, Trächtler A. Observer-based nonlinear
control strategies for Hardware-in-the-Loop simulations of multiaxial suspension
test rigs. Mechatronics. 2018;50:212-224.
apa: Olma, S., Kohlstedt, A., Traphöner, P., Jäker, K.-P., & Trächtler, A. (2018).
Observer-based nonlinear control strategies for Hardware-in-the-Loop simulations
of multiaxial suspension test rigs. Mechatronics, 50, 212–224.
bibtex: '@article{Olma_Kohlstedt_Traphöner_Jäker_Trächtler_2018, title={Observer-based
nonlinear control strategies for Hardware-in-the-Loop simulations of multiaxial
suspension test rigs}, volume={50}, journal={Mechatronics}, author={Olma, Simon
and Kohlstedt, Andreas and Traphöner, Phillip and Jäker, Karl-Peter and Trächtler,
Ansgar}, year={2018}, pages={212–224} }'
chicago: 'Olma, Simon, Andreas Kohlstedt, Phillip Traphöner, Karl-Peter Jäker, and
Ansgar Trächtler. “Observer-Based Nonlinear Control Strategies for Hardware-in-the-Loop
Simulations of Multiaxial Suspension Test Rigs.” Mechatronics 50 (2018):
212–24.'
ieee: S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, and A. Trächtler, “Observer-based
nonlinear control strategies for Hardware-in-the-Loop simulations of multiaxial
suspension test rigs,” Mechatronics, vol. 50, pp. 212–224, 2018.
mla: Olma, Simon, et al. “Observer-Based Nonlinear Control Strategies for Hardware-in-the-Loop
Simulations of Multiaxial Suspension Test Rigs.” Mechatronics, vol. 50,
2018, pp. 212–24.
short: S. Olma, A. Kohlstedt, P. Traphöner, K.-P. Jäker, A. Trächtler, Mechatronics
50 (2018) 212–224.
date_created: 2021-08-09T05:41:39Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
intvolume: ' 50'
language:
- iso: eng
page: 212-224
publication: Mechatronics
status: public
title: Observer-based nonlinear control strategies for Hardware-in-the-Loop simulations
of multiaxial suspension test rigs
type: journal_article
user_id: '24876'
volume: 50
year: '2018'
...
---
_id: '22998'
author:
- first_name: Jens
full_name: Holtkötter, Jens
last_name: Holtkötter
- first_name: Jan
full_name: Michael, Jan
last_name: Michael
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Marcos
full_name: Bockholt, Marcos
last_name: Bockholt
- first_name: Andreas
full_name: Möhlenkamp, Andreas
last_name: Möhlenkamp
- first_name: Michael
full_name: Katter, Michael
last_name: Katter
citation:
ama: Holtkötter J, Michael J, Henke C, et al. Rapid-Control-Prototyping as part
of Model-Based Development of Heat Pump Dryers. Procedia Manufacturing.
2018;24:235–242.
apa: Holtkötter, J., Michael, J., Henke, C., Trächtler, A., Bockholt, M., Möhlenkamp,
A., & Katter, M. (2018). Rapid-Control-Prototyping as part of Model-Based
Development of Heat Pump Dryers. Procedia Manufacturing, 24, 235–242.
bibtex: '@article{Holtkötter_Michael_Henke_Trächtler_Bockholt_Möhlenkamp_Katter_2018,
title={Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump
Dryers}, volume={24}, journal={Procedia Manufacturing}, author={Holtkötter, Jens
and Michael, Jan and Henke, Christian and Trächtler, Ansgar and Bockholt, Marcos
and Möhlenkamp, Andreas and Katter, Michael}, year={2018}, pages={235–242} }'
chicago: 'Holtkötter, Jens, Jan Michael, Christian Henke, Ansgar Trächtler, Marcos
Bockholt, Andreas Möhlenkamp, and Michael Katter. “Rapid-Control-Prototyping as
Part of Model-Based Development of Heat Pump Dryers.” Procedia Manufacturing
24 (2018): 235–242.'
ieee: J. Holtkötter et al., “Rapid-Control-Prototyping as part of Model-Based
Development of Heat Pump Dryers,” Procedia Manufacturing, vol. 24, pp.
235–242, 2018.
mla: Holtkötter, Jens, et al. “Rapid-Control-Prototyping as Part of Model-Based
Development of Heat Pump Dryers.” Procedia Manufacturing, vol. 24, 2018,
pp. 235–242.
short: J. Holtkötter, J. Michael, C. Henke, A. Trächtler, M. Bockholt, A. Möhlenkamp,
M. Katter, Procedia Manufacturing 24 (2018) 235–242.
date_created: 2021-08-09T05:41:40Z
date_updated: 2022-01-06T06:55:44Z
department:
- _id: '153'
- _id: '241'
intvolume: ' 24'
language:
- iso: eng
page: 235–242
publication: Procedia Manufacturing
status: public
title: Rapid-Control-Prototyping as part of Model-Based Development of Heat Pump Dryers
type: journal_article
user_id: '24876'
volume: 24
year: '2018'
...
---
_id: '23000'
author:
- first_name: Patrick
full_name: Biemelt, Patrick
id: '24876'
last_name: Biemelt
- first_name: Sven
full_name: Henning, Sven
id: '13195'
last_name: Henning
- first_name: Nico
full_name: Rüddenklau, Nico
id: '22359'
last_name: Rüddenklau
- first_name: Sandra
full_name: Gausemeier, Sandra
id: '17793'
last_name: Gausemeier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Biemelt P, Henning S, Rüddenklau N, Gausemeier S, Trächtler A. A Model Predictive
Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator with Hybrid
Kinematics. In: Proceedings of the Driving Simulation Conference Europe VR
(DSC). ; 2018:79-85.'
apa: Biemelt, P., Henning, S., Rüddenklau, N., Gausemeier, S., & Trächtler,
A. (2018). A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom
Driving Simulator with Hybrid Kinematics. Proceedings of the Driving Simulation
Conference Europe VR (DSC), 79–85.
bibtex: '@inproceedings{Biemelt_Henning_Rüddenklau_Gausemeier_Trächtler_2018, title={A
Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator
with Hybrid Kinematics}, booktitle={Proceedings of the Driving Simulation Conference
Europe VR (DSC)}, author={Biemelt, Patrick and Henning, Sven and Rüddenklau, Nico
and Gausemeier, Sandra and Trächtler, Ansgar}, year={2018}, pages={79–85} }'
chicago: Biemelt, Patrick, Sven Henning, Nico Rüddenklau, Sandra Gausemeier, and
Ansgar Trächtler. “A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom
Driving Simulator with Hybrid Kinematics.” In Proceedings of the Driving Simulation
Conference Europe VR (DSC), 79–85, 2018.
ieee: P. Biemelt, S. Henning, N. Rüddenklau, S. Gausemeier, and A. Trächtler, “A
Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving Simulator
with Hybrid Kinematics,” in Proceedings of the Driving Simulation Conference
Europe VR (DSC), Antibes, France, 2018, pp. 79–85.
mla: Biemelt, Patrick, et al. “A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom
Driving Simulator with Hybrid Kinematics.” Proceedings of the Driving Simulation
Conference Europe VR (DSC), 2018, pp. 79–85.
short: 'P. Biemelt, S. Henning, N. Rüddenklau, S. Gausemeier, A. Trächtler, in:
Proceedings of the Driving Simulation Conference Europe VR (DSC), 2018, pp. 79–85.'
conference:
location: Antibes, France
name: Driving Simulation Conference Europe VR (DSC)
date_created: 2021-08-09T05:41:43Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
page: 79-85
publication: Proceedings of the Driving Simulation Conference Europe VR (DSC)
status: public
title: A Model Predictive Motion Cueing Strategy for a 5-Degree-of-Freedom Driving
Simulator with Hybrid Kinematics
type: conference
user_id: '24876'
year: '2018'
...