---
_id: '9985'
abstract:
- lang: ger
text: Intelligente technische Systeme sind durch einen erhöhten Funktionsumfang
charakterisiert, der diese dazu befähigt, autonom auf wechselnde Umgebungsbedingungen,
Anforderungen und inhärente Systemzustände zu reagieren. Dies kann mit den Methoden
der Selbstoptimie-rung erreicht werden. Hier werden mit Verfahren der Mehrzieloptimierung
mögliche Betriebs-punkte des Systems bestimmt zwischen denen das System im Betrieb
autonom auswählt und somit eine Verhaltensadaption erwirkt. Zur Berechnung der
Betriebspunkte ist es notwendig ein Modell des Systemverhaltens aufzustellen und
das Verhalten hinsichtlich verschiedener, meist konfliktärer, Ziele zu quantifizieren.
Bei der Modellierung des Systemverhaltens und der Formulierung der Ziele stellt
die Absiche-rung der Verlässlichkeit auf Grund der zunehmenden Systemkomplexität
eine große Heraus-forderung dar, der im Entwicklungsprozess begegnet werden muss.
Die Implementierung von Selbstoptimierung bietet darüber hinaus in Kombination
mit einer Zustandsüberwachung im Betrieb die Möglichkeit einer zuverlässigkeitsbasierten
Verhaltensanpassung, deren Potential zu einer Steigerung der Verlässlichkeit genutzt
werden kann. In dieser Arbeit werden die Entwicklung intelligenter technischer
Systeme und die damit ver-bundenen notwendigen Entwicklungsschritte zur Absicherung
der Verlässlichkeit anhand von selbstoptimierenden Systemen betrachtet. Dazu gehören
die Formulierung verlässlichkeitsre-levanter Ziele und die Implementierung einer
Zustandsüberwachung als Basis für eine zuver-lässigkeitsbasierte Verhaltensanpassung.
Es werden auf Grundlage einer Beschreibung der Entwicklungsschritte, Potentiale
zur Steigerung der Verlässlichkeit sowie Chancen und zukünf-tige Herausforderungen
herausgestellt und diskutiert.
author:
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Thorben
full_name: Kaul, Thorben
id: '14802'
last_name: Kaul
- first_name: James Kuria
full_name: Kimotho, James Kuria
last_name: Kimotho
citation:
ama: 'Sextro W, Meyer T, Kaul T, Kimotho JK. Entwicklung verlässlicher, intelligenter
Systeme. In: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017)
- Entwicklung Und Betrieb Zuverlässiger Produkte. Leonberg; 2017:17–30.'
apa: Sextro, W., Meyer, T., Kaul, T., & Kimotho, J. K. (2017). Entwicklung verlässlicher,
intelligenter Systeme. In VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit
(TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte. (pp. 17–30).
Leonberg.
bibtex: '@inproceedings{Sextro_Meyer_Kaul_Kimotho_2017, place={Leonberg}, title={Entwicklung
verlässlicher, intelligenter Systeme}, booktitle={VDI-Berichte 2307–28. Tagung
Technische Zuverlässigkeit (TTZ 2017) - Entwicklung und Betrieb zuverlässiger
Produkte.}, author={Sextro, Walter and Meyer, Tobias and Kaul, Thorben and Kimotho,
James Kuria}, year={2017}, pages={17–30} }'
chicago: Sextro, Walter, Tobias Meyer, Thorben Kaul, and James Kuria Kimotho. “Entwicklung
Verlässlicher, Intelligenter Systeme.” In VDI-Berichte 2307–28. Tagung Technische
Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger Produkte.,
17–30. Leonberg, 2017.
ieee: W. Sextro, T. Meyer, T. Kaul, and J. K. Kimotho, “Entwicklung verlässlicher,
intelligenter Systeme,” in VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit
(TTZ 2017) - Entwicklung und Betrieb zuverlässiger Produkte., 2017, pp. 17–30.
mla: Sextro, Walter, et al. “Entwicklung Verlässlicher, Intelligenter Systeme.”
VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) - Entwicklung
Und Betrieb Zuverlässiger Produkte., 2017, pp. 17–30.
short: 'W. Sextro, T. Meyer, T. Kaul, J.K. Kimotho, in: VDI-Berichte 2307–28. Tagung
Technische Zuverlässigkeit (TTZ 2017) - Entwicklung Und Betrieb Zuverlässiger
Produkte., Leonberg, 2017, pp. 17–30.'
date_created: 2019-05-27T09:52:37Z
date_updated: 2019-09-30T09:03:57Z
department:
- _id: '151'
keyword:
- intelligente Systeme
language:
- iso: eng
page: 17–30
place: Leonberg
publication: VDI-Berichte 2307–28. Tagung Technische Zuverlässigkeit (TTZ 2017) -
Entwicklung und Betrieb zuverlässiger Produkte.
quality_controlled: '1'
status: public
title: Entwicklung verlässlicher, intelligenter Systeme
type: conference
user_id: '55222'
year: '2017'
...
---
_id: '9988'
author:
- first_name: Martin
full_name: Düsing, Martin
last_name: Düsing
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
citation:
ama: Düsing M, Mahnken R. “A coupled phase field/diffusion model for upper and lower
bainitic transformation.” International Journal of Solids and Structures.
2017:172-183. doi:10.1016/j.ijsolstr.2017.11.018
apa: Düsing, M., & Mahnken, R. (2017). “A coupled phase field/diffusion model
for upper and lower bainitic transformation.” International Journal of Solids
and Structures, 172–183. https://doi.org/10.1016/j.ijsolstr.2017.11.018
bibtex: '@article{Düsing_Mahnken_2017, title={“A coupled phase field/diffusion model
for upper and lower bainitic transformation”}, DOI={10.1016/j.ijsolstr.2017.11.018},
journal={International Journal of Solids and Structures}, author={Düsing, Martin
and Mahnken, Rolf}, year={2017}, pages={172–183} }'
chicago: Düsing, Martin, and Rolf Mahnken. “‘A Coupled Phase Field/Diffusion Model
for Upper and Lower Bainitic Transformation.’” International Journal of Solids
and Structures, 2017, 172–83. https://doi.org/10.1016/j.ijsolstr.2017.11.018.
ieee: M. Düsing and R. Mahnken, “‘A coupled phase field/diffusion model for upper
and lower bainitic transformation,’” International Journal of Solids and Structures,
pp. 172–183, 2017.
mla: Düsing, Martin, and Rolf Mahnken. “‘A Coupled Phase Field/Diffusion Model for
Upper and Lower Bainitic Transformation.’” International Journal of Solids
and Structures, 2017, pp. 172–83, doi:10.1016/j.ijsolstr.2017.11.018.
short: M. Düsing, R. Mahnken, International Journal of Solids and Structures (2017)
172–183.
date_created: 2019-05-27T10:04:12Z
date_updated: 2019-05-27T10:51:04Z
department:
- _id: '154'
doi: 10.1016/j.ijsolstr.2017.11.018
language:
- iso: eng
page: 172-183
publication: International Journal of Solids and Structures
publication_identifier:
issn:
- 0020-7683
publication_status: published
status: public
title: '"A coupled phase field/diffusion model for upper and lower bainitic transformation"'
type: journal_article
user_id: '78813'
year: '2017'
...
---
_id: '9989'
author:
- first_name: X.
full_name: Ju, X.
last_name: Ju
- first_name: R.
full_name: Mahnken, R.
last_name: Mahnken
citation:
ama: Ju X, Mahnken R. “Goal-oriented adaptivity for linear elastic micromorphic
continua based on primal and adjoint consistency analysis.” International Journal
for Numerical Methods in Engineering. 2017:1017-1039. doi:10.1002/nme.5541
apa: Ju, X., & Mahnken, R. (2017). “Goal-oriented adaptivity for linear elastic
micromorphic continua based on primal and adjoint consistency analysis.” International
Journal for Numerical Methods in Engineering, 1017–1039. https://doi.org/10.1002/nme.5541
bibtex: '@article{Ju_Mahnken_2017, title={“Goal-oriented adaptivity for linear elastic
micromorphic continua based on primal and adjoint consistency analysis”}, DOI={10.1002/nme.5541}, journal={International
Journal for Numerical Methods in Engineering}, author={Ju, X. and Mahnken, R.},
year={2017}, pages={1017–1039} }'
chicago: Ju, X., and R. Mahnken. “‘Goal-Oriented Adaptivity for Linear Elastic Micromorphic
Continua Based on Primal and Adjoint Consistency Analysis.’” International
Journal for Numerical Methods in Engineering, 2017, 1017–39. https://doi.org/10.1002/nme.5541.
ieee: X. Ju and R. Mahnken, “‘Goal-oriented adaptivity for linear elastic micromorphic
continua based on primal and adjoint consistency analysis,’” International
Journal for Numerical Methods in Engineering, pp. 1017–1039, 2017.
mla: Ju, X., and R. Mahnken. “‘Goal-Oriented Adaptivity for Linear Elastic Micromorphic
Continua Based on Primal and Adjoint Consistency Analysis.’” International
Journal for Numerical Methods in Engineering, 2017, pp. 1017–39, doi:10.1002/nme.5541.
short: X. Ju, R. Mahnken, International Journal for Numerical Methods in Engineering
(2017) 1017–1039.
date_created: 2019-05-27T10:08:39Z
date_updated: 2019-05-27T10:50:56Z
department:
- _id: '154'
doi: 10.1002/nme.5541
language:
- iso: eng
page: 1017-1039
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
issn:
- 0029-5981
publication_status: published
status: public
title: '"Goal-oriented adaptivity for linear elastic micromorphic continua based on
primal and adjoint consistency analysis"'
type: journal_article
user_id: '78813'
year: '2017'
...
---
_id: '6556'
author:
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: René Spencer
full_name: Chatwell, René Spencer
last_name: Chatwell
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Claes L, Chatwell RS, Vrabec J, Henning B. A Spectral Approach to Acoustic
Absorption Measurement. In: PROCEEDINGS -- AMA Conferences 2017. AMA Service
GmbH; 2017:304-309. doi:10.5162/sensor2017/C1.2'
apa: Claes, L., Chatwell, R. S., Vrabec, J., & Henning, B. (2017). A Spectral
Approach to Acoustic Absorption Measurement. In PROCEEDINGS -- AMA Conferences
2017 (pp. 304–309). AMA Service GmbH. https://doi.org/10.5162/sensor2017/C1.2
bibtex: '@inproceedings{Claes_Chatwell_Vrabec_Henning_2017, title={A Spectral Approach
to Acoustic Absorption Measurement}, DOI={10.5162/sensor2017/C1.2},
booktitle={PROCEEDINGS -- AMA Conferences 2017}, publisher={AMA Service GmbH},
author={Claes, Leander and Chatwell, René Spencer and Vrabec, Jadran and Henning,
Bernd}, year={2017}, pages={304–309} }'
chicago: Claes, Leander, René Spencer Chatwell, Jadran Vrabec, and Bernd Henning.
“A Spectral Approach to Acoustic Absorption Measurement.” In PROCEEDINGS --
AMA Conferences 2017, 304–9. AMA Service GmbH, 2017. https://doi.org/10.5162/sensor2017/C1.2.
ieee: L. Claes, R. S. Chatwell, J. Vrabec, and B. Henning, “A Spectral Approach
to Acoustic Absorption Measurement,” in PROCEEDINGS -- AMA Conferences 2017,
2017, pp. 304–309.
mla: Claes, Leander, et al. “A Spectral Approach to Acoustic Absorption Measurement.”
PROCEEDINGS -- AMA Conferences 2017, AMA Service GmbH, 2017, pp. 304–09,
doi:10.5162/sensor2017/C1.2.
short: 'L. Claes, R.S. Chatwell, J. Vrabec, B. Henning, in: PROCEEDINGS -- AMA Conferences
2017, AMA Service GmbH, 2017, pp. 304–309.'
date_created: 2019-01-09T14:37:02Z
date_updated: 2022-01-06T07:03:11Z
department:
- _id: '49'
- _id: '155'
doi: 10.5162/sensor2017/C1.2
language:
- iso: eng
page: 304-309
publication: PROCEEDINGS -- AMA Conferences 2017
publication_identifier:
isbn:
- 978-3-9816876-4-4
publisher: AMA Service GmbH
status: public
title: A Spectral Approach to Acoustic Absorption Measurement
type: conference
user_id: '11829'
year: '2017'
...
---
_id: '6559'
author:
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Henning
full_name: Zeipert, Henning
id: '32580'
last_name: Zeipert
- first_name: Peter
full_name: Koppa, Peter
last_name: Koppa
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Claes L, Zeipert H, Koppa P, Tröster T, Henning B. Additively manufactured
acoustic diffuser structures for ultrasonic measurement applications. In: Proceedings
of Meetings on Acoustics. Honolulu; 2017:030004. doi:10.1121/2.0000688'
apa: Claes, L., Zeipert, H., Koppa, P., Tröster, T., & Henning, B. (2017). Additively
manufactured acoustic diffuser structures for ultrasonic measurement applications.
In Proceedings of Meetings on Acoustics (p. 030004). Honolulu. https://doi.org/10.1121/2.0000688
bibtex: '@inproceedings{Claes_Zeipert_Koppa_Tröster_Henning_2017, place={Honolulu},
title={Additively manufactured acoustic diffuser structures for ultrasonic measurement
applications}, DOI={10.1121/2.0000688},
booktitle={Proceedings of Meetings on Acoustics}, author={Claes, Leander and Zeipert,
Henning and Koppa, Peter and Tröster, Thomas and Henning, Bernd}, year={2017},
pages={030004} }'
chicago: Claes, Leander, Henning Zeipert, Peter Koppa, Thomas Tröster, and Bernd
Henning. “Additively Manufactured Acoustic Diffuser Structures for Ultrasonic
Measurement Applications.” In Proceedings of Meetings on Acoustics, 030004.
Honolulu, 2017. https://doi.org/10.1121/2.0000688.
ieee: L. Claes, H. Zeipert, P. Koppa, T. Tröster, and B. Henning, “Additively manufactured
acoustic diffuser structures for ultrasonic measurement applications,” in Proceedings
of Meetings on Acoustics, 2017, p. 030004.
mla: Claes, Leander, et al. “Additively Manufactured Acoustic Diffuser Structures
for Ultrasonic Measurement Applications.” Proceedings of Meetings on Acoustics,
2017, p. 030004, doi:10.1121/2.0000688.
short: 'L. Claes, H. Zeipert, P. Koppa, T. Tröster, B. Henning, in: Proceedings
of Meetings on Acoustics, Honolulu, 2017, p. 030004.'
date_created: 2019-01-09T14:37:06Z
date_updated: 2022-01-06T07:03:11Z
department:
- _id: '49'
- _id: '149'
- _id: '219'
doi: 10.1121/2.0000688
language:
- iso: eng
page: '030004'
place: Honolulu
publication: Proceedings of Meetings on Acoustics
status: public
title: Additively manufactured acoustic diffuser structures for ultrasonic measurement
applications
type: conference
user_id: '11829'
year: '2017'
...
---
_id: '16791'
author:
- first_name: André
full_name: Dietrich, André
last_name: Dietrich
- first_name: Bernard
full_name: Nacke, Bernard
last_name: Nacke
- first_name: Florian
full_name: Pfeifer, Florian
id: '22717'
last_name: Pfeifer
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Investigation of geometrical
discontinuities in blanks for hot sheet metal forming process under the influence
of induction heating. In: ; 2017.'
apa: Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., & Tröster, T. (2017).
Investigation of geometrical discontinuities in blanks for hot sheet metal forming
process under the influence of induction heating. Presented at the 5th International
Conference on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam.
bibtex: '@inproceedings{Dietrich_Nacke_Pfeifer_Marten_Tröster_2017, title={Investigation
of geometrical discontinuities in blanks for hot sheet metal forming process under
the influence of induction heating}, author={Dietrich, André and Nacke, Bernard
and Pfeifer, Florian and Marten, Thorsten and Tröster, Thomas}, year={2017} }'
chicago: Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas
Tröster. “Investigation of Geometrical Discontinuities in Blanks for Hot Sheet
Metal Forming Process under the Influence of Induction Heating,” 2017.
ieee: A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Investigation
of geometrical discontinuities in blanks for hot sheet metal forming process under
the influence of induction heating,” presented at the 5th International Conference
on Steels in Cars and Trucks, Noordwijkerhout/Amsterdam, 2017.
mla: Dietrich, André, et al. Investigation of Geometrical Discontinuities in
Blanks for Hot Sheet Metal Forming Process under the Influence of Induction Heating.
2017.
short: 'A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.'
conference:
end_date: 2017-06-22
location: Noordwijkerhout/Amsterdam
name: 5th International Conference on Steels in Cars and Trucks
start_date: 2017-06-18
date_created: 2020-04-21T13:31:20Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '149'
- _id: '321'
- _id: '9'
language:
- iso: eng
status: public
title: Investigation of geometrical discontinuities in blanks for hot sheet metal
forming process under the influence of induction heating
type: conference
user_id: '338'
year: '2017'
...
---
_id: '16792'
author:
- first_name: André
full_name: Dietrich, André
last_name: Dietrich
- first_name: Bernard
full_name: Nacke, Bernard
last_name: Nacke
- first_name: Florian
full_name: Pfeifer, Florian
id: '22717'
last_name: Pfeifer
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Dietrich A, Nacke B, Pfeifer F, Marten T, Tröster T. Effects of Holes in Blanks
for Press Hardening Process due to Induction Heating. In: ; 2017.'
apa: Dietrich, A., Nacke, B., Pfeifer, F., Marten, T., & Tröster, T. (2017).
Effects of Holes in Blanks for Press Hardening Process due to Induction Heating.
Presented at the XVIII International UIE-Congress Electrotechnologies for Material
Processing, Hannover.
bibtex: '@inproceedings{Dietrich_Nacke_Pfeifer_Marten_Tröster_2017, title={Effects
of Holes in Blanks for Press Hardening Process due to Induction Heating}, author={Dietrich,
André and Nacke, Bernard and Pfeifer, Florian and Marten, Thorsten and Tröster,
Thomas}, year={2017} }'
chicago: Dietrich, André, Bernard Nacke, Florian Pfeifer, Thorsten Marten, and Thomas
Tröster. “Effects of Holes in Blanks for Press Hardening Process Due to Induction
Heating,” 2017.
ieee: A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, and T. Tröster, “Effects of
Holes in Blanks for Press Hardening Process due to Induction Heating,” presented
at the XVIII International UIE-Congress Electrotechnologies for Material Processing,
Hannover, 2017.
mla: Dietrich, André, et al. Effects of Holes in Blanks for Press Hardening Process
Due to Induction Heating. 2017.
short: 'A. Dietrich, B. Nacke, F. Pfeifer, T. Marten, T. Tröster, in: 2017.'
conference:
end_date: 2017-06-09
location: Hannover
name: XVIII International UIE-Congress Electrotechnologies for Material Processing
start_date: 2017-06-06
date_created: 2020-04-21T13:35:46Z
date_updated: 2022-01-06T06:52:56Z
department:
- _id: '149'
language:
- iso: eng
status: public
title: Effects of Holes in Blanks for Press Hardening Process due to Induction Heating
type: conference
user_id: '22717'
year: '2017'
...
---
_id: '15941'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Kim-Henning
full_name: Sauerland, Kim-Henning
last_name: Sauerland
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Reuter C, Sauerland K-H, Tröster T. Experimental and numerical crushing analysis
of circular CFRP tubes under axial impact loading. Composite Structures.
2017:33-44. doi:10.1016/j.compstruct.2017.04.052
apa: Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Experimental and numerical
crushing analysis of circular CFRP tubes under axial impact loading. Composite
Structures, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052
bibtex: '@article{Reuter_Sauerland_Tröster_2017, title={Experimental and numerical
crushing analysis of circular CFRP tubes under axial impact loading}, DOI={10.1016/j.compstruct.2017.04.052},
journal={Composite Structures}, author={Reuter, Corin and Sauerland, Kim-Henning
and Tröster, Thomas}, year={2017}, pages={33–44} }'
chicago: Reuter, Corin, Kim-Henning Sauerland, and Thomas Tröster. “Experimental
and Numerical Crushing Analysis of Circular CFRP Tubes under Axial Impact Loading.”
Composite Structures, 2017, 33–44. https://doi.org/10.1016/j.compstruct.2017.04.052.
ieee: C. Reuter, K.-H. Sauerland, and T. Tröster, “Experimental and numerical crushing
analysis of circular CFRP tubes under axial impact loading,” Composite Structures,
pp. 33–44, 2017.
mla: Reuter, Corin, et al. “Experimental and Numerical Crushing Analysis of Circular
CFRP Tubes under Axial Impact Loading.” Composite Structures, 2017, pp.
33–44, doi:10.1016/j.compstruct.2017.04.052.
short: C. Reuter, K.-H. Sauerland, T. Tröster, Composite Structures (2017) 33–44.
date_created: 2020-02-20T13:23:14Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.compstruct.2017.04.052
language:
- iso: eng
page: 33-44
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Composite Structures
publication_identifier:
issn:
- 0263-8223
publication_status: published
status: public
title: Experimental and numerical crushing analysis of circular CFRP tubes under axial
impact loading
type: journal_article
user_id: '72008'
year: '2017'
...
---
_id: '15942'
author:
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Reuter C, Tröster T. Crashworthiness and numerical simulation of hybrid aluminium-CFRP
tubes under axial impact. Thin-Walled Structures. 2017;117:1-9. doi:10.1016/j.tws.2017.03.034
apa: Reuter, C., & Tröster, T. (2017). Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact. Thin-Walled Structures,
117, 1–9. https://doi.org/10.1016/j.tws.2017.03.034
bibtex: '@article{Reuter_Tröster_2017, title={Crashworthiness and numerical simulation
of hybrid aluminium-CFRP tubes under axial impact}, volume={117}, DOI={10.1016/j.tws.2017.03.034},
journal={Thin-Walled Structures}, author={Reuter, Corin and Tröster, Thomas},
year={2017}, pages={1–9} }'
chicago: 'Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures
117 (2017): 1–9. https://doi.org/10.1016/j.tws.2017.03.034.'
ieee: C. Reuter and T. Tröster, “Crashworthiness and numerical simulation of hybrid
aluminium-CFRP tubes under axial impact,” Thin-Walled Structures, vol.
117, pp. 1–9, 2017.
mla: Reuter, Corin, and Thomas Tröster. “Crashworthiness and Numerical Simulation
of Hybrid Aluminium-CFRP Tubes under Axial Impact.” Thin-Walled Structures,
vol. 117, 2017, pp. 1–9, doi:10.1016/j.tws.2017.03.034.
short: C. Reuter, T. Tröster, Thin-Walled Structures 117 (2017) 1–9.
date_created: 2020-02-20T13:33:08Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2017.03.034
intvolume: ' 117'
language:
- iso: eng
page: 1-9
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: Crashworthiness and numerical simulation of hybrid aluminium-CFRP tubes under
axial impact
type: journal_article
user_id: '72008'
volume: 117
year: '2017'
...
---
_id: '15944'
author:
- first_name: Jan André
full_name: Striewe, Jan André
id: '29413'
last_name: Striewe
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Kim-Henning
full_name: Sauerland, Kim-Henning
last_name: Sauerland
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Striewe JA, Reuter C, Sauerland K-H, Tröster T. Manufacturing and crashworthiness
of fabric-reinforced thermoplastic composites. Thin-Walled Structures.
2017:501-508. doi:10.1016/j.tws.2017.11.011
apa: Striewe, J. A., Reuter, C., Sauerland, K.-H., & Tröster, T. (2017). Manufacturing
and crashworthiness of fabric-reinforced thermoplastic composites. Thin-Walled
Structures, 501–508. https://doi.org/10.1016/j.tws.2017.11.011
bibtex: '@article{Striewe_Reuter_Sauerland_Tröster_2017, title={Manufacturing and
crashworthiness of fabric-reinforced thermoplastic composites}, DOI={10.1016/j.tws.2017.11.011},
journal={Thin-Walled Structures}, author={Striewe, Jan André and Reuter, Corin
and Sauerland, Kim-Henning and Tröster, Thomas}, year={2017}, pages={501–508}
}'
chicago: Striewe, Jan André, Corin Reuter, Kim-Henning Sauerland, and Thomas Tröster.
“Manufacturing and Crashworthiness of Fabric-Reinforced Thermoplastic Composites.”
Thin-Walled Structures, 2017, 501–8. https://doi.org/10.1016/j.tws.2017.11.011.
ieee: J. A. Striewe, C. Reuter, K.-H. Sauerland, and T. Tröster, “Manufacturing
and crashworthiness of fabric-reinforced thermoplastic composites,” Thin-Walled
Structures, pp. 501–508, 2017.
mla: Striewe, Jan André, et al. “Manufacturing and Crashworthiness of Fabric-Reinforced
Thermoplastic Composites.” Thin-Walled Structures, 2017, pp. 501–08, doi:10.1016/j.tws.2017.11.011.
short: J.A. Striewe, C. Reuter, K.-H. Sauerland, T. Tröster, Thin-Walled Structures
(2017) 501–508.
date_created: 2020-02-20T14:00:29Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2017.11.011
language:
- iso: eng
page: 501-508
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
status: public
title: Manufacturing and crashworthiness of fabric-reinforced thermoplastic composites
type: journal_article
user_id: '29413'
year: '2017'
...
---
_id: '16059'
author:
- first_name: Nathalie
full_name: Weiß-Borkowski, Nathalie
last_name: Weiß-Borkowski
- first_name: Juhne
full_name: Lian, Juhne
last_name: Lian
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Sebastian
full_name: Münstermann, Sebastian
last_name: Münstermann
- first_name: Wolfgang
full_name: Bleck, Wolfgang
last_name: Bleck
citation:
ama: 'Weiß-Borkowski N, Lian J, Marten T, Tröster T, Münstermann S, Bleck W. Forming
limit curves determined in high-speed Nakajima tests and predicted by a strain
rate sensitive model. In: Proceedings of The 20th International ESAFORM Conference
on Material Forming: ESAFORM 2017. ; 2017. doi:10.1063/1.5007961'
apa: 'Weiß-Borkowski, N., Lian, J., Marten, T., Tröster, T., Münstermann, S., &
Bleck, W. (2017). Forming limit curves determined in high-speed Nakajima tests
and predicted by a strain rate sensitive model. In Proceedings of The 20th
International ESAFORM Conference on Material Forming: ESAFORM 2017. https://doi.org/10.1063/1.5007961'
bibtex: '@inproceedings{Weiß-Borkowski_Lian_Marten_Tröster_Münstermann_Bleck_2017,
title={Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model}, DOI={10.1063/1.5007961},
booktitle={Proceedings of The 20th International ESAFORM Conference on Material
Forming: ESAFORM 2017}, author={Weiß-Borkowski, Nathalie and Lian, Juhne and Marten,
Thorsten and Tröster, Thomas and Münstermann, Sebastian and Bleck, Wolfgang},
year={2017} }'
chicago: 'Weiß-Borkowski, Nathalie, Juhne Lian, Thorsten Marten, Thomas Tröster,
Sebastian Münstermann, and Wolfgang Bleck. “Forming Limit Curves Determined in
High-Speed Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” In
Proceedings of The 20th International ESAFORM Conference on Material Forming:
ESAFORM 2017, 2017. https://doi.org/10.1063/1.5007961.'
ieee: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, and W.
Bleck, “Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model,” in Proceedings of The 20th International
ESAFORM Conference on Material Forming: ESAFORM 2017, 2017.'
mla: 'Weiß-Borkowski, Nathalie, et al. “Forming Limit Curves Determined in High-Speed
Nakajima Tests and Predicted by a Strain Rate Sensitive Model.” Proceedings
of The 20th International ESAFORM Conference on Material Forming: ESAFORM 2017,
2017, doi:10.1063/1.5007961.'
short: 'N. Weiß-Borkowski, J. Lian, T. Marten, T. Tröster, S. Münstermann, W. Bleck,
in: Proceedings of The 20th International ESAFORM Conference on Material Forming:
ESAFORM 2017, 2017.'
date_created: 2020-02-24T16:28:58Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1063/1.5007961
language:
- iso: eng
publication: 'Proceedings of The 20th International ESAFORM Conference on Material
Forming: ESAFORM 2017'
publication_status: published
status: public
title: Forming limit curves determined in high-speed Nakajima tests and predicted
by a strain rate sensitive model
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16062'
abstract:
- lang: eng
text: The main objective for an economic and ecological use of raw materials
is the achievement of closed raw material cycles. Because of that, not only the
manufacturing procedures are important during the development of new materials
but also the recycling processes. Within the increased use of lightweight construction
in recent years, the application of multi-material or hybrid structures reach
high significance for the automotive industry. In this development, especially
the carbon fibre reinforced plastics (CFRP) gained its importance. However, currently
there are no recycling strategies available for hybrid structures; complete recycling
processes for CFRP are still expandable. This work presents methods for separation
of hybrid structures made of metal and CFRP, as well as the corresponding process
windows and the boundary conditions. The separation is performed by introduction
of thermal heat and the behaviour of these bonded compounds is analyzed based
on shear tensile tests. The results of these studies are used to develop a complete
recycling process for reclamation of hybrid structures.
author:
- first_name: Swetlana
full_name: Schweizer, Swetlana
id: '8938'
last_name: Schweizer
- first_name: Anna
full_name: Becker-Staines, Anna
last_name: Becker-Staines
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Schweizer S, Becker-Staines A, Tröster T. Separation of Hybrid Structures for
the Reclaim of their Single Components. Key Engineering Materials. 2017:568-575.
doi:10.4028/www.scientific.net/kem.742.568
apa: Schweizer, S., Becker-Staines, A., & Tröster, T. (2017). Separation of
Hybrid Structures for the Reclaim of their Single Components. Key Engineering
Materials, 568–575. https://doi.org/10.4028/www.scientific.net/kem.742.568
bibtex: '@article{Schweizer_Becker-Staines_Tröster_2017, title={Separation of Hybrid
Structures for the Reclaim of their Single Components}, DOI={10.4028/www.scientific.net/kem.742.568},
journal={Key Engineering Materials}, author={Schweizer, Swetlana and Becker-Staines,
Anna and Tröster, Thomas}, year={2017}, pages={568–575} }'
chicago: Schweizer, Swetlana, Anna Becker-Staines, and Thomas Tröster. “Separation
of Hybrid Structures for the Reclaim of Their Single Components.” Key Engineering
Materials, 2017, 568–75. https://doi.org/10.4028/www.scientific.net/kem.742.568.
ieee: S. Schweizer, A. Becker-Staines, and T. Tröster, “Separation of Hybrid Structures
for the Reclaim of their Single Components,” Key Engineering Materials,
pp. 568–575, 2017.
mla: Schweizer, Swetlana, et al. “Separation of Hybrid Structures for the Reclaim
of Their Single Components.” Key Engineering Materials, 2017, pp. 568–75,
doi:10.4028/www.scientific.net/kem.742.568.
short: S. Schweizer, A. Becker-Staines, T. Tröster, Key Engineering Materials (2017)
568–575.
date_created: 2020-02-24T16:32:21Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.4028/www.scientific.net/kem.742.568
language:
- iso: eng
page: 568-575
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
status: public
title: Separation of Hybrid Structures for the Reclaim of their Single Components
type: journal_article
user_id: '72008'
year: '2017'
...
---
_id: '16063'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Approve of porostiy for increasing process speed in the
laser melting process of Ti6Al4V. In: ; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Approve of porostiy for increasing process
speed in the laser melting process of Ti6Al4V. Presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Approve of porostiy for increasing
process speed in the laser melting process of Ti6Al4V}, author={Ahlers, Dominik
and Tröster, Thomas}, year={2017} }'
chicago: Ahlers, Dominik, and Thomas Tröster. “Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V,” 2017.
ieee: D. Ahlers and T. Tröster, “Approve of porostiy for increasing process speed
in the laser melting process of Ti6Al4V,” presented at the 28th Annual International
Solid Freeform Fabrication Symposium 2017, Austin, Texas, USA, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Approve of Porostiy for Increasing
Process Speed in the Laser Melting Process of Ti6Al4V. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
end_date: 2017-08-09
location: Austin, Texas, USA
name: 28th Annual International Solid Freeform Fabrication Symposium 2017
start_date: 2017-08-07
date_created: 2020-02-24T16:34:43Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: eng
status: public
title: Approve of porostiy for increasing process speed in the laser melting process
of Ti6Al4V
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16065'
author:
- first_name: P.
full_name: Kutz, P.
last_name: Kutz
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: M.
full_name: Ellouz, M.
last_name: Ellouz
- first_name: T.
full_name: Kordisch, T.
last_name: Kordisch
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Kutz P, Wang Z, Ellouz M, Kordisch T, Tröster T. Computed Tomography Examination
of Hybrid Components after Dynamic 3-Point Bending Test. In: ; 2017.'
apa: Kutz, P., Wang, Z., Ellouz, M., Kordisch, T., & Tröster, T. (2017). Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test.
Presented at the 2nd Conference & Exhibition on Light Materials, Bremen.
bibtex: '@inproceedings{Kutz_Wang_Ellouz_Kordisch_Tröster_2017, title={Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test},
author={Kutz, P. and Wang, Z. and Ellouz, M. and Kordisch, T. and Tröster, Thomas},
year={2017} }'
chicago: Kutz, P., Z. Wang, M. Ellouz, T. Kordisch, and Thomas Tröster. “Computed
Tomography Examination of Hybrid Components after Dynamic 3-Point Bending Test,”
2017.
ieee: P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, and T. Tröster, “Computed Tomography
Examination of Hybrid Components after Dynamic 3-Point Bending Test,” presented
at the 2nd Conference & Exhibition on Light Materials, Bremen, 2017.
mla: Kutz, P., et al. Computed Tomography Examination of Hybrid Components after
Dynamic 3-Point Bending Test. 2017.
short: 'P. Kutz, Z. Wang, M. Ellouz, T. Kordisch, T. Tröster, in: 2017.'
conference:
end_date: 2017-11-10
location: Bremen
name: 2nd Conference & Exhibition on Light Materials
start_date: 2017-11-08
date_created: 2020-02-24T16:38:15Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Computed Tomography Examination of Hybrid Components after Dynamic 3-Point
Bending Test
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16070'
author:
- first_name: 'Nathalie '
full_name: 'Weiß Borkowski, Nathalie '
last_name: Weiß Borkowski
citation:
ama: Weiß Borkowski N. Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen. Shaker Verlag Band 2017/22; 2017.
apa: Weiß Borkowski, N. (2017). Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22.
bibtex: '@book{Weiß Borkowski_2017, title={Analyse des Verformungsverhaltens von
Übergangszonen partiell pressgehärteter Strukturen}, publisher={Shaker Verlag
Band 2017/22}, author={Weiß Borkowski, Nathalie }, year={2017} }'
chicago: Weiß Borkowski, Nathalie . Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
ieee: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
mla: Weiß Borkowski, Nathalie. Analyse des Verformungsverhaltens von Übergangszonen
partiell pressgehärteter Strukturen. Shaker Verlag Band 2017/22, 2017.
short: N. Weiß Borkowski, Analyse des Verformungsverhaltens von Übergangszonen partiell
pressgehärteter Strukturen, Shaker Verlag Band 2017/22, 2017.
date_created: 2020-02-25T10:24:55Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-8440-5013-4
publisher: Shaker Verlag Band 2017/22
status: public
supervisor:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
title: Analyse des Verformungsverhaltens von Übergangszonen partiell pressgehärteter
Strukturen
type: dissertation
user_id: '72008'
year: '2017'
...
---
_id: '16071'
author:
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: P.
full_name: Kutz, P.
last_name: Kutz
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wang Z, Kutz P, Tröster T. Herstellung und computertomographische Untersuchung
von hybriden Strukturen aus Metall und Faserverbundkunststoffen. In: ; 2017.'
apa: Wang, Z., Kutz, P., & Tröster, T. (2017). Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen.
Presented at the 15. Bielefelder Werkstofftag, Bielefeld.
bibtex: '@inproceedings{Wang_Kutz_Tröster_2017, title={Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen},
author={Wang, Z. and Kutz, P. and Tröster, Thomas}, year={2017} }'
chicago: Wang, Z., P. Kutz, and Thomas Tröster. “Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,”
2017.
ieee: Z. Wang, P. Kutz, and T. Tröster, “Herstellung und computertomographische
Untersuchung von hybriden Strukturen aus Metall und Faserverbundkunststoffen,”
presented at the 15. Bielefelder Werkstofftag, Bielefeld, 2017.
mla: Wang, Z., et al. Herstellung und computertomographische Untersuchung von
hybriden Strukturen aus Metall und Faserverbundkunststoffen. 2017.
short: 'Z. Wang, P. Kutz, T. Tröster, in: 2017.'
conference:
location: Bielefeld
name: 15. Bielefelder Werkstofftag
start_date: 06. April 2017
date_created: 2020-02-25T10:30:04Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Herstellung und computertomographische Untersuchung von hybriden Strukturen
aus Metall und Faserverbundkunststoffen
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16072'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
citation:
ama: 'Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate
on the instability in high speed cupping tests – Investigation on dual phase steel
and numerical validation by CRACH. In: ; 2017.'
apa: Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM
Conference, Schloss Hohenkammer.
bibtex: '@inproceedings{Weiß Borkowski_Camberg_Tröster_Marten_2017, title={Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH}, author={Weiß Borkowski,
N. and Camberg, Alan Adam and Tröster, Thomas and Marten, Thorsten}, year={2017}
}'
chicago: Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten.
“Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation
on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
ieee: N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of
strain rate on the instability in high speed cupping tests – Investigation on
dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM
Conference, Schloss Hohenkammer, 2017.
mla: Weiß Borkowski, N., et al. Influence of Strain Rate on the Instability in
High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation
by CRACH. 2017.
short: 'N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.'
conference:
location: Schloss Hohenkammer
name: 4th MATFEM Conference
start_date: 2017-04-25
date_created: 2020-02-25T10:37:14Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influence of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16073'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: A.
full_name: Schulz Beenken, A.
last_name: Schulz Beenken
citation:
ama: 'Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming
Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates.
In: ; 2017.'
apa: Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017).
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates. Presented at the 6th International Conference on Hot
Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
bibtex: '@inproceedings{Weiß Borkowski_Marten_Tröster_Schulz Beenken_2017, title={Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates}, author={Weiß Borkowski, N. and Marten, Thorsten and Tröster,
Thomas and Schulz Beenken, A.}, year={2017} }'
chicago: Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken.
“Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates,” 2017.
ieee: N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates,” presented at the 6th International Conference on Hot Sheet
Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017.
mla: Weiß Borkowski, N., et al. Analysis of the Forming Behaviour of Transition
Areas of Partial Press-Hardened Steel at High Strain-Rates. 2017.
short: 'N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.'
conference:
end_date: 2017-06-07
location: Atlanta, USA
name: 6th International Conference on Hot Sheet Metal Forming of High-Performance
Steel (CHS2 2017)
start_date: 2017-06-04
date_created: 2020-02-25T10:46:26Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication_identifier:
isbn:
- 978-1-935117-66-7
status: public
title: Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16074'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In:
; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive
Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Materialkombinationen in der
additive Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive
Fertigung,” 2017.
ieee: D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,”
presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive
Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Erfurt
name: Rapid.Tech 2017 – Fachforum Luftfahrt
start_date: 2017-06-22
date_created: 2020-02-25T10:52:14Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Materialkombinationen in der additive Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16075'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung.
In: ; 2017.'
apa: 'Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der
additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck:
Der Weg zum fertigen Bauteil, Nördlingen.'
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Aspekte der Produktentwicklung
in der additiven Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in
der additiven Fertigung,” 2017.
ieee: 'D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven
Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der
Weg zum fertigen Bauteil, Nördlingen, 2017.'
mla: Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der
additiven Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Nördlingen
name: 'Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil'
start_date: 2017-07-04
date_created: 2020-02-25T10:55:13Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Aspekte der Produktentwicklung in der additiven Fertigung
type: conference
user_id: '11207'
year: '2017'
...