---
_id: '16072'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
citation:
ama: 'Weiß Borkowski N, Camberg AA, Tröster T, Marten T. Influence of strain rate
on the instability in high speed cupping tests – Investigation on dual phase steel
and numerical validation by CRACH. In: ; 2017.'
apa: Weiß Borkowski, N., Camberg, A. A., Tröster, T., & Marten, T. (2017). Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH. Presented at the 4th MATFEM
Conference, Schloss Hohenkammer.
bibtex: '@inproceedings{Weiß Borkowski_Camberg_Tröster_Marten_2017, title={Influence
of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH}, author={Weiß Borkowski,
N. and Camberg, Alan Adam and Tröster, Thomas and Marten, Thorsten}, year={2017}
}'
chicago: Weiß Borkowski, N., Alan Adam Camberg, Thomas Tröster, and Thorsten Marten.
“Influence of Strain Rate on the Instability in High Speed Cupping Tests – Investigation
on Dual Phase Steel and Numerical Validation by CRACH,” 2017.
ieee: N. Weiß Borkowski, A. A. Camberg, T. Tröster, and T. Marten, “Influence of
strain rate on the instability in high speed cupping tests – Investigation on
dual phase steel and numerical validation by CRACH,” presented at the 4th MATFEM
Conference, Schloss Hohenkammer, 2017.
mla: Weiß Borkowski, N., et al. Influence of Strain Rate on the Instability in
High Speed Cupping Tests – Investigation on Dual Phase Steel and Numerical Validation
by CRACH. 2017.
short: 'N. Weiß Borkowski, A.A. Camberg, T. Tröster, T. Marten, in: 2017.'
conference:
location: Schloss Hohenkammer
name: 4th MATFEM Conference
start_date: 2017-04-25
date_created: 2020-02-25T10:37:14Z
date_updated: 2022-01-06T06:52:42Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Influence of strain rate on the instability in high speed cupping tests – Investigation
on dual phase steel and numerical validation by CRACH
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16073'
author:
- first_name: N.
full_name: Weiß Borkowski, N.
last_name: Weiß Borkowski
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: A.
full_name: Schulz Beenken, A.
last_name: Schulz Beenken
citation:
ama: 'Weiß Borkowski N, Marten T, Tröster T, Schulz Beenken A. Analysis of the Forming
Behaviour of Transition Areas of Partial Press-Hardened Steel at High Strain-Rates.
In: ; 2017.'
apa: Weiß Borkowski, N., Marten, T., Tröster, T., & Schulz Beenken, A. (2017).
Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates. Presented at the 6th International Conference on Hot
Sheet Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA.
bibtex: '@inproceedings{Weiß Borkowski_Marten_Tröster_Schulz Beenken_2017, title={Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates}, author={Weiß Borkowski, N. and Marten, Thorsten and Tröster,
Thomas and Schulz Beenken, A.}, year={2017} }'
chicago: Weiß Borkowski, N., Thorsten Marten, Thomas Tröster, and A. Schulz Beenken.
“Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates,” 2017.
ieee: N. Weiß Borkowski, T. Marten, T. Tröster, and A. Schulz Beenken, “Analysis
of the Forming Behaviour of Transition Areas of Partial Press-Hardened Steel at
High Strain-Rates,” presented at the 6th International Conference on Hot Sheet
Metal Forming of High-Performance Steel (CHS2 2017), Atlanta, USA, 2017.
mla: Weiß Borkowski, N., et al. Analysis of the Forming Behaviour of Transition
Areas of Partial Press-Hardened Steel at High Strain-Rates. 2017.
short: 'N. Weiß Borkowski, T. Marten, T. Tröster, A. Schulz Beenken, in: 2017.'
conference:
end_date: 2017-06-07
location: Atlanta, USA
name: 6th International Conference on Hot Sheet Metal Forming of High-Performance
Steel (CHS2 2017)
start_date: 2017-06-04
date_created: 2020-02-25T10:46:26Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
publication_identifier:
isbn:
- 978-1-935117-66-7
status: public
title: Analysis of the Forming Behaviour of Transition Areas of Partial Press-Hardened
Steel at High Strain-Rates
type: conference
user_id: '72008'
year: '2017'
...
---
_id: '16074'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Materialkombinationen in der additive Fertigung. In:
; 2017.'
apa: Ahlers, D., & Tröster, T. (2017). Materialkombinationen in der additive
Fertigung. Presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt.
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Materialkombinationen in der
additive Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Materialkombinationen in der additive
Fertigung,” 2017.
ieee: D. Ahlers and T. Tröster, “Materialkombinationen in der additive Fertigung,”
presented at the Rapid.Tech 2017 – Fachforum Luftfahrt, Erfurt, 2017.
mla: Ahlers, Dominik, and Thomas Tröster. Materialkombinationen in der additive
Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Erfurt
name: Rapid.Tech 2017 – Fachforum Luftfahrt
start_date: 2017-06-22
date_created: 2020-02-25T10:52:14Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Materialkombinationen in der additive Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '16075'
author:
- first_name: Dominik
full_name: Ahlers, Dominik
id: '11207'
last_name: Ahlers
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ahlers D, Tröster T. Aspekte der Produktentwicklung in der additiven Fertigung.
In: ; 2017.'
apa: 'Ahlers, D., & Tröster, T. (2017). Aspekte der Produktentwicklung in der
additiven Fertigung. Presented at the Technikforum: Design, Konstruktion, 3D Druck:
Der Weg zum fertigen Bauteil, Nördlingen.'
bibtex: '@inproceedings{Ahlers_Tröster_2017, title={Aspekte der Produktentwicklung
in der additiven Fertigung}, author={Ahlers, Dominik and Tröster, Thomas}, year={2017}
}'
chicago: Ahlers, Dominik, and Thomas Tröster. “Aspekte der Produktentwicklung in
der additiven Fertigung,” 2017.
ieee: 'D. Ahlers and T. Tröster, “Aspekte der Produktentwicklung in der additiven
Fertigung,” presented at the Technikforum: Design, Konstruktion, 3D Druck: Der
Weg zum fertigen Bauteil, Nördlingen, 2017.'
mla: Ahlers, Dominik, and Thomas Tröster. Aspekte der Produktentwicklung in der
additiven Fertigung. 2017.
short: 'D. Ahlers, T. Tröster, in: 2017.'
conference:
location: Nördlingen
name: 'Technikforum: Design, Konstruktion, 3D Druck: Der Weg zum fertigen Bauteil'
start_date: 2017-07-04
date_created: 2020-02-25T10:55:13Z
date_updated: 2022-01-06T06:52:43Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
- _id: '219'
language:
- iso: ger
status: public
title: Aspekte der Produktentwicklung in der additiven Fertigung
type: conference
user_id: '11207'
year: '2017'
...
---
_id: '13161'
author:
- first_name: Frithjof H.
full_name: Dubberke, Frithjof H.
last_name: Dubberke
- first_name: Matthias
full_name: Linnemann, Matthias
last_name: Linnemann
- first_name: Wameedh Khider
full_name: Abbas, Wameedh Khider
last_name: Abbas
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Klaus-Peter
full_name: Priebe, Klaus-Peter
last_name: Priebe
- first_name: Maximilian
full_name: Roedder, Maximilian
last_name: Roedder
- first_name: Matthias
full_name: Neef, Matthias
last_name: Neef
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: Dubberke FH, Linnemann M, Abbas WK, et al. Experimental setup of a cascaded
two-stage organic Rankine cycle. Applied Thermal Engineering. 2017:958-964.
doi:10.1016/j.applthermaleng.2017.11.137
apa: Dubberke, F. H., Linnemann, M., Abbas, W. K., Baumhögger, E., Priebe, K.-P.,
Roedder, M., … Vrabec, J. (2017). Experimental setup of a cascaded two-stage organic
Rankine cycle. Applied Thermal Engineering, 958–964. https://doi.org/10.1016/j.applthermaleng.2017.11.137
bibtex: '@article{Dubberke_Linnemann_Abbas_Baumhögger_Priebe_Roedder_Neef_Vrabec_2017,
title={Experimental setup of a cascaded two-stage organic Rankine cycle}, DOI={10.1016/j.applthermaleng.2017.11.137},
journal={Applied Thermal Engineering}, author={Dubberke, Frithjof H. and Linnemann,
Matthias and Abbas, Wameedh Khider and Baumhögger, Elmar and Priebe, Klaus-Peter
and Roedder, Maximilian and Neef, Matthias and Vrabec, Jadran}, year={2017}, pages={958–964}
}'
chicago: Dubberke, Frithjof H., Matthias Linnemann, Wameedh Khider Abbas, Elmar
Baumhögger, Klaus-Peter Priebe, Maximilian Roedder, Matthias Neef, and Jadran
Vrabec. “Experimental Setup of a Cascaded Two-Stage Organic Rankine Cycle.” Applied
Thermal Engineering, 2017, 958–64. https://doi.org/10.1016/j.applthermaleng.2017.11.137.
ieee: F. H. Dubberke et al., “Experimental setup of a cascaded two-stage
organic Rankine cycle,” Applied Thermal Engineering, pp. 958–964, 2017.
mla: Dubberke, Frithjof H., et al. “Experimental Setup of a Cascaded Two-Stage Organic
Rankine Cycle.” Applied Thermal Engineering, 2017, pp. 958–64, doi:10.1016/j.applthermaleng.2017.11.137.
short: F.H. Dubberke, M. Linnemann, W.K. Abbas, E. Baumhögger, K.-P. Priebe, M.
Roedder, M. Neef, J. Vrabec, Applied Thermal Engineering (2017) 958–964.
date_created: 2019-09-09T15:12:17Z
date_updated: 2022-01-06T06:51:29Z
department:
- _id: '155'
doi: 10.1016/j.applthermaleng.2017.11.137
language:
- iso: eng
page: 958-964
publication: Applied Thermal Engineering
publication_identifier:
issn:
- 1359-4311
publication_status: published
status: public
title: Experimental setup of a cascaded two-stage organic Rankine cycle
type: journal_article
user_id: '15164'
year: '2017'
...
---
_id: '13162'
author:
- first_name: Pavel Anatolyevich
full_name: Nikolaychuk, Pavel Anatolyevich
last_name: Nikolaychuk
- first_name: Matthias
full_name: Linnemann, Matthias
last_name: Linnemann
- first_name: Y. Mauricio
full_name: Muñoz-Muñoz, Y. Mauricio
last_name: Muñoz-Muñoz
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: Nikolaychuk PA, Linnemann M, Muñoz-Muñoz YM, Baumhögger E, Vrabec J. Experimental
and Computational Study on the Solubility of Argon in Propan-2-ol at High Temperatures.
Chemistry Letters. 2017:990-991. doi:10.1246/cl.170221
apa: Nikolaychuk, P. A., Linnemann, M., Muñoz-Muñoz, Y. M., Baumhögger, E., &
Vrabec, J. (2017). Experimental and Computational Study on the Solubility of Argon
in Propan-2-ol at High Temperatures. Chemistry Letters, 990–991. https://doi.org/10.1246/cl.170221
bibtex: '@article{Nikolaychuk_Linnemann_Muñoz-Muñoz_Baumhögger_Vrabec_2017, title={Experimental
and Computational Study on the Solubility of Argon in Propan-2-ol at High Temperatures},
DOI={10.1246/cl.170221}, journal={Chemistry
Letters}, author={Nikolaychuk, Pavel Anatolyevich and Linnemann, Matthias and
Muñoz-Muñoz, Y. Mauricio and Baumhögger, Elmar and Vrabec, Jadran}, year={2017},
pages={990–991} }'
chicago: Nikolaychuk, Pavel Anatolyevich, Matthias Linnemann, Y. Mauricio Muñoz-Muñoz,
Elmar Baumhögger, and Jadran Vrabec. “Experimental and Computational Study on
the Solubility of Argon in Propan-2-Ol at High Temperatures.” Chemistry Letters,
2017, 990–91. https://doi.org/10.1246/cl.170221.
ieee: P. A. Nikolaychuk, M. Linnemann, Y. M. Muñoz-Muñoz, E. Baumhögger, and J.
Vrabec, “Experimental and Computational Study on the Solubility of Argon in Propan-2-ol
at High Temperatures,” Chemistry Letters, pp. 990–991, 2017.
mla: Nikolaychuk, Pavel Anatolyevich, et al. “Experimental and Computational Study
on the Solubility of Argon in Propan-2-Ol at High Temperatures.” Chemistry
Letters, 2017, pp. 990–91, doi:10.1246/cl.170221.
short: P.A. Nikolaychuk, M. Linnemann, Y.M. Muñoz-Muñoz, E. Baumhögger, J. Vrabec,
Chemistry Letters (2017) 990–991.
date_created: 2019-09-09T15:14:51Z
date_updated: 2022-01-06T06:51:29Z
department:
- _id: '155'
doi: 10.1246/cl.170221
language:
- iso: eng
page: 990-991
publication: Chemistry Letters
publication_identifier:
issn:
- 0366-7022
- 1348-0715
publication_status: published
status: public
title: Experimental and Computational Study on the Solubility of Argon in Propan-2-ol
at High Temperatures
type: journal_article
user_id: '15164'
year: '2017'
...
---
_id: '10004'
author:
- first_name: X.
full_name: Ju, X.
last_name: Ju
- first_name: R.
full_name: Mahnken, R.
last_name: Mahnken
citation:
ama: Ju X, Mahnken R. “Model adaptivity on effective elastic properties coupled
with adaptive FEM.” Computer Methods in Applied Mechanics and Engineering.
2017;322:208-237. doi:10.1016/j.cma.2017.04.013
apa: Ju, X., & Mahnken, R. (2017). “Model adaptivity on effective elastic properties
coupled with adaptive FEM.” Computer Methods in Applied Mechanics and Engineering,
322, 208–237. https://doi.org/10.1016/j.cma.2017.04.013
bibtex: '@article{Ju_Mahnken_2017, title={“Model adaptivity on effective elastic
properties coupled with adaptive FEM”}, volume={322}, DOI={10.1016/j.cma.2017.04.013},
journal={Computer Methods in Applied Mechanics and Engineering}, publisher={Elsevier},
author={Ju, X. and Mahnken, R.}, year={2017}, pages={208–237} }'
chicago: 'Ju, X., and R. Mahnken. “‘Model Adaptivity on Effective Elastic Properties
Coupled with Adaptive FEM.’” Computer Methods in Applied Mechanics and Engineering
322 (2017): 208–37. https://doi.org/10.1016/j.cma.2017.04.013.'
ieee: X. Ju and R. Mahnken, “‘Model adaptivity on effective elastic properties coupled
with adaptive FEM,’” Computer Methods in Applied Mechanics and Engineering,
vol. 322, pp. 208–237, 2017.
mla: Ju, X., and R. Mahnken. “‘Model Adaptivity on Effective Elastic Properties
Coupled with Adaptive FEM.’” Computer Methods in Applied Mechanics and Engineering,
vol. 322, Elsevier, 2017, pp. 208–37, doi:10.1016/j.cma.2017.04.013.
short: X. Ju, R. Mahnken, Computer Methods in Applied Mechanics and Engineering
322 (2017) 208–237.
date_created: 2019-05-27T11:24:33Z
date_updated: 2022-01-06T06:50:22Z
department:
- _id: '154'
doi: 10.1016/j.cma.2017.04.013
intvolume: ' 322'
language:
- iso: eng
page: 208-237
publication: Computer Methods in Applied Mechanics and Engineering
publication_identifier:
issn:
- 0045-7825
publication_status: published
publisher: Elsevier
status: public
title: '"Model adaptivity on effective elastic properties coupled with adaptive FEM"'
type: journal_article
user_id: '78813'
volume: 322
year: '2017'
...
---
_id: '10006'
author:
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
- first_name: Peter
full_name: Lenz, Peter
last_name: Lenz
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
citation:
ama: Dammann C, Lenz P, Mahnken R. “Thermo-chemo-mechanical Effective Properties
for Homogeneous and Heterogeneous n -Phase Mixtures with Application to Curing.”
Procedia CIRP. 2017;66:51-56. doi:10.1016/j.procir.2017.03.360
apa: Dammann, C., Lenz, P., & Mahnken, R. (2017). “Thermo-chemo-mechanical Effective
Properties for Homogeneous and Heterogeneous n -Phase Mixtures with Application
to Curing.” Procedia CIRP, 66, 51–56. https://doi.org/10.1016/j.procir.2017.03.360
bibtex: '@article{Dammann_Lenz_Mahnken_2017, title={“Thermo-chemo-mechanical Effective
Properties for Homogeneous and Heterogeneous n -Phase Mixtures with Application
to Curing”}, volume={66}, DOI={10.1016/j.procir.2017.03.360},
journal={Procedia CIRP}, publisher={Elsevier}, author={Dammann, Christian and
Lenz, Peter and Mahnken, Rolf}, year={2017}, pages={51–56} }'
chicago: 'Dammann, Christian, Peter Lenz, and Rolf Mahnken. “‘Thermo-Chemo-Mechanical
Effective Properties for Homogeneous and Heterogeneous n -Phase Mixtures with
Application to Curing.’” Procedia CIRP 66 (2017): 51–56. https://doi.org/10.1016/j.procir.2017.03.360.'
ieee: C. Dammann, P. Lenz, and R. Mahnken, “‘Thermo-chemo-mechanical Effective Properties
for Homogeneous and Heterogeneous n -Phase Mixtures with Application to Curing,’”
Procedia CIRP, vol. 66, pp. 51–56, 2017.
mla: Dammann, Christian, et al. “‘Thermo-Chemo-Mechanical Effective Properties for
Homogeneous and Heterogeneous n -Phase Mixtures with Application to Curing.’”
Procedia CIRP, vol. 66, Elsevier, 2017, pp. 51–56, doi:10.1016/j.procir.2017.03.360.
short: C. Dammann, P. Lenz, R. Mahnken, Procedia CIRP 66 (2017) 51–56.
date_created: 2019-05-27T11:44:07Z
date_updated: 2022-01-06T06:50:22Z
department:
- _id: '154'
doi: 10.1016/j.procir.2017.03.360
intvolume: ' 66'
language:
- iso: eng
page: 51-56
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
publisher: Elsevier
status: public
title: '"Thermo-chemo-mechanical Effective Properties for Homogeneous and Heterogeneous
n -Phase Mixtures with Application to Curing"'
type: journal_article
user_id: '78813'
volume: 66
year: '2017'
...
---
_id: '10007'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
- first_name: Peter
full_name: Lenz, Peter
last_name: Lenz
citation:
ama: Mahnken R, Dammann C, Lenz P. (n)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS
FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES. International Journal for
Multiscale Computational Engineering. 2017;15(4):295-322. doi:10.1615/intjmultcompeng.2017020304
apa: Mahnken, R., Dammann, C., & Lenz, P. (2017). (n)- AND (n + 1)-LAYERED COMPOSITE
SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES. International
Journal for Multiscale Computational Engineering, 15(4), 295–322. https://doi.org/10.1615/intjmultcompeng.2017020304
bibtex: '@article{Mahnken_Dammann_Lenz_2017, title={(n)- AND (n + 1)-LAYERED COMPOSITE
SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES}, volume={15},
DOI={10.1615/intjmultcompeng.2017020304},
number={4}, journal={International Journal for Multiscale Computational Engineering},
author={Mahnken, Rolf and Dammann, Christian and Lenz, Peter}, year={2017}, pages={295–322}
}'
chicago: 'Mahnken, Rolf, Christian Dammann, and Peter Lenz. “(N)- AND (n + 1)-LAYERED
COMPOSITE SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES.” International
Journal for Multiscale Computational Engineering 15, no. 4 (2017): 295–322.
https://doi.org/10.1615/intjmultcompeng.2017020304.'
ieee: R. Mahnken, C. Dammann, and P. Lenz, “(n)- AND (n + 1)-LAYERED COMPOSITE SPHERE
MODELS FOR THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES,” International Journal
for Multiscale Computational Engineering, vol. 15, no. 4, pp. 295–322, 2017.
mla: Mahnken, Rolf, et al. “(N)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS FOR
THERMO-CHEMO-MECHANICAL EFFECTIVE PROPERTIES.” International Journal for Multiscale
Computational Engineering, vol. 15, no. 4, 2017, pp. 295–322, doi:10.1615/intjmultcompeng.2017020304.
short: R. Mahnken, C. Dammann, P. Lenz, International Journal for Multiscale Computational
Engineering 15 (2017) 295–322.
date_created: 2019-05-27T11:50:18Z
date_updated: 2022-01-06T06:50:22Z
department:
- _id: '154'
doi: 10.1615/intjmultcompeng.2017020304
intvolume: ' 15'
issue: '4'
language:
- iso: eng
page: 295-322
publication: International Journal for Multiscale Computational Engineering
publication_identifier:
issn:
- 1543-1649
publication_status: published
status: public
title: (n)- AND (n + 1)-LAYERED COMPOSITE SPHERE MODELS FOR THERMO-CHEMO-MECHANICAL
EFFECTIVE PROPERTIES
type: journal_article
user_id: '78813'
volume: 15
year: '2017'
...
---
_id: '10008'
author:
- first_name: E.
full_name: Penner, E.
last_name: Penner
- first_name: I.
full_name: Caylak, I.
last_name: Caylak
- first_name: R.
full_name: Mahnken, R.
last_name: Mahnken
citation:
ama: 'Penner E, Caylak I, Mahnken R. “Fuzzy and stochastic analysis of rubber like
materials.” In: Proceedings of the 2nd International Conference on Uncertainty
Quantification in Computational Sciences and Engineering, Rhode Island, 15.-17.06.2017.
; 2017:554-564.'
apa: Penner, E., Caylak, I., & Mahnken, R. (2017). “Fuzzy and stochastic analysis
of rubber like materials.” In Proceedings of the 2nd International Conference
on Uncertainty Quantification in Computational Sciences and Engineering, Rhode
Island, 15.-17.06.2017 (pp. 554–564). Rhode Island.
bibtex: '@inproceedings{Penner_Caylak_Mahnken_2017, title={“Fuzzy and stochastic
analysis of rubber like materials”}, booktitle={Proceedings of the 2nd International
Conference on Uncertainty Quantification in Computational Sciences and Engineering,
Rhode Island, 15.-17.06.2017}, author={Penner, E. and Caylak, I. and Mahnken,
R.}, year={2017}, pages={554–564} }'
chicago: Penner, E., I. Caylak, and R. Mahnken. “‘Fuzzy and Stochastic Analysis
of Rubber like Materials.’” In Proceedings of the 2nd International Conference
on Uncertainty Quantification in Computational Sciences and Engineering, Rhode
Island, 15.-17.06.2017, 554–64, 2017.
ieee: E. Penner, I. Caylak, and R. Mahnken, “‘Fuzzy and stochastic analysis of rubber
like materials,’” in Proceedings of the 2nd International Conference on Uncertainty
Quantification in Computational Sciences and Engineering, Rhode Island, 15.-17.06.2017,
Rhode Island, 2017, pp. 554–564.
mla: Penner, E., et al. “‘Fuzzy and Stochastic Analysis of Rubber like Materials.’”
Proceedings of the 2nd International Conference on Uncertainty Quantification
in Computational Sciences and Engineering, Rhode Island, 15.-17.06.2017, 2017,
pp. 554–64.
short: 'E. Penner, I. Caylak, R. Mahnken, in: Proceedings of the 2nd International
Conference on Uncertainty Quantification in Computational Sciences and Engineering,
Rhode Island, 15.-17.06.2017, 2017, pp. 554–564.'
conference:
end_date: 2017-06-17
location: Rhode Island
name: Proceedings of the 2nd International Conference on Uncertainty Quantification
in Computational Sciences and Engineering
start_date: 2017-06-15
date_created: 2019-05-27T13:06:06Z
date_updated: 2022-01-06T06:50:22Z
department:
- _id: '154'
language:
- iso: eng
page: 554-564
publication: Proceedings of the 2nd International Conference on Uncertainty Quantification
in Computational Sciences and Engineering, Rhode Island, 15.-17.06.2017
status: public
title: '"Fuzzy and stochastic analysis of rubber like materials"'
type: conference
user_id: '78813'
year: '2017'
...
---
_id: '29915'
abstract:
- lang: eng
text: Für On-Board-Ladegeräte sind brückenlose netzfreundliche Gleichrichter in Kombination mit einem
Resonanzkonverter empfehlenswert. Auf diese Weise lassen sich Verluste minimieren und es wird eine hohe Leistungsdichte erreicht. Darüber hinaus wurde der Kühlungskreislauf des Ladegeräts durch CFD (Computational Fluid
Dynamics, rechnergestützte Flüssigkeitsdynamik)-Simulationen des Kühlkanals optimiert, um einen bestmöglichen Wärmeübergang bei
geringem Druckabfall zu erzielen.
author:
- first_name: Sven
full_name: Bolte, Sven
last_name: Bolte
- first_name: Carsten
full_name: Henkenius, Carsten
last_name: Henkenius
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Alexander
full_name: Zibart, Alexander
id: '11029'
last_name: Zibart
- first_name: Heiko
full_name: Figge, Heiko
last_name: Figge
citation:
ama: Bolte S, Henkenius C, Böcker J, Kenig E, Zibart A, Figge H. Wassergekühltes
On-Board-Ladegerät mit optimiertem Kühlkanal. wt Werkstattstechnik online.
2017;107(5):381ff.
apa: Bolte, S., Henkenius, C., Böcker, J., Kenig, E., Zibart, A., & Figge, H.
(2017). Wassergekühltes On-Board-Ladegerät mit optimiertem Kühlkanal. Wt Werkstattstechnik
Online, 107(5), 381ff.
bibtex: '@article{Bolte_Henkenius_Böcker_Kenig_Zibart_Figge_2017, title={Wassergekühltes
On-Board-Ladegerät mit optimiertem Kühlkanal}, volume={107}, number={5}, journal={wt
Werkstattstechnik online}, publisher={Springer-VDI-Verlag}, author={Bolte, Sven
and Henkenius, Carsten and Böcker, Joachim and Kenig, Eugeny and Zibart, Alexander
and Figge, Heiko}, year={2017}, pages={381ff} }'
chicago: 'Bolte, Sven, Carsten Henkenius, Joachim Böcker, Eugeny Kenig, Alexander
Zibart, and Heiko Figge. “Wassergekühltes On-Board-Ladegerät Mit Optimiertem Kühlkanal.”
Wt Werkstattstechnik Online 107, no. 5 (2017): 381ff.'
ieee: S. Bolte, C. Henkenius, J. Böcker, E. Kenig, A. Zibart, and H. Figge, “Wassergekühltes
On-Board-Ladegerät mit optimiertem Kühlkanal,” wt Werkstattstechnik online,
vol. 107, no. 5, p. 381ff, 2017.
mla: Bolte, Sven, et al. “Wassergekühltes On-Board-Ladegerät Mit Optimiertem Kühlkanal.”
Wt Werkstattstechnik Online, vol. 107, no. 5, Springer-VDI-Verlag, 2017,
p. 381ff.
short: S. Bolte, C. Henkenius, J. Böcker, E. Kenig, A. Zibart, H. Figge, Wt Werkstattstechnik
Online 107 (2017) 381ff.
date_created: 2022-02-21T09:32:28Z
date_updated: 2022-02-21T09:58:01Z
department:
- _id: '393'
- _id: '52'
- _id: '145'
intvolume: ' 107'
issue: '5'
language:
- iso: eng
main_file_link:
- url: https://docplayer.org/116518773-Wassergekuehltes-on-board-ladegeraet-mit-optimiertem-kuehlkanal.html
page: 381ff
publication: wt Werkstattstechnik online
publisher: Springer-VDI-Verlag
status: public
title: Wassergekühltes On-Board-Ladegerät mit optimiertem Kühlkanal
type: journal_article
user_id: '66'
volume: 107
year: '2017'
...
---
_id: '29914'
author:
- first_name: Sven
full_name: Bolte, Sven
last_name: Bolte
- first_name: Carsten
full_name: Henkenius, Carsten
last_name: Henkenius
- first_name: Joachim
full_name: Böcker, Joachim
id: '66'
last_name: Böcker
orcid: 0000-0002-8480-7295
- first_name: Alexander
full_name: Zibart, Alexander
id: '11029'
last_name: Zibart
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
- first_name: Heiko
full_name: Figge, Heiko
last_name: Figge
citation:
ama: 'Bolte S, Henkenius C, Böcker J, Zibart A, Kenig E, Figge H. Water-cooled on-board
charger with optimized cooling channel. In: 2017 19th European Conference on
Power Electronics and Applications (EPE’17 ECCE Europe). IEEE; 2017. doi:10.23919/epe17ecceeurope.2017.8099019'
apa: Bolte, S., Henkenius, C., Böcker, J., Zibart, A., Kenig, E., & Figge, H.
(2017). Water-cooled on-board charger with optimized cooling channel. 2017
19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe).
European Conference on Power Electronics and Applications (EPE’17 ECCE Europe),
Warsaw, Poland . https://doi.org/10.23919/epe17ecceeurope.2017.8099019
bibtex: '@inproceedings{Bolte_Henkenius_Böcker_Zibart_Kenig_Figge_2017, title={Water-cooled
on-board charger with optimized cooling channel}, DOI={10.23919/epe17ecceeurope.2017.8099019},
booktitle={2017 19th European Conference on Power Electronics and Applications
(EPE’17 ECCE Europe)}, publisher={IEEE}, author={Bolte, Sven and Henkenius, Carsten
and Böcker, Joachim and Zibart, Alexander and Kenig, Eugeny and Figge, Heiko},
year={2017} }'
chicago: Bolte, Sven, Carsten Henkenius, Joachim Böcker, Alexander Zibart, Eugeny
Kenig, and Heiko Figge. “Water-Cooled on-Board Charger with Optimized Cooling
Channel.” In 2017 19th European Conference on Power Electronics and Applications
(EPE’17 ECCE Europe). IEEE, 2017. https://doi.org/10.23919/epe17ecceeurope.2017.8099019.
ieee: 'S. Bolte, C. Henkenius, J. Böcker, A. Zibart, E. Kenig, and H. Figge, “Water-cooled
on-board charger with optimized cooling channel,” presented at the European Conference
on Power Electronics and Applications (EPE’17 ECCE Europe), Warsaw, Poland , 2017,
doi: 10.23919/epe17ecceeurope.2017.8099019.'
mla: Bolte, Sven, et al. “Water-Cooled on-Board Charger with Optimized Cooling Channel.”
2017 19th European Conference on Power Electronics and Applications (EPE’17
ECCE Europe), IEEE, 2017, doi:10.23919/epe17ecceeurope.2017.8099019.
short: 'S. Bolte, C. Henkenius, J. Böcker, A. Zibart, E. Kenig, H. Figge, in: 2017
19th European Conference on Power Electronics and Applications (EPE’17 ECCE Europe),
IEEE, 2017.'
conference:
location: 'Warsaw, Poland '
name: European Conference on Power Electronics and Applications (EPE'17 ECCE Europe)
start_date: 2017-09
date_created: 2022-02-21T09:20:19Z
date_updated: 2022-02-21T09:58:16Z
department:
- _id: '52'
- _id: '145'
- _id: '393'
doi: 10.23919/epe17ecceeurope.2017.8099019
language:
- iso: eng
publication: 2017 19th European Conference on Power Electronics and Applications (EPE'17
ECCE Europe)
publication_status: published
publisher: IEEE
status: public
title: Water-cooled on-board charger with optimized cooling channel
type: conference
user_id: '66'
year: '2017'
...
---
_id: '24363'
author:
- first_name: Ilona
full_name: Horwath, Ilona
last_name: Horwath
citation:
ama: 'Horwath I. Scotts Institutionenbegriff als Heuristik zur Analyse von Geschlechterverhältnissen
in Organisationen: Inspirationsquelle „Geschlechterwissen. In: Scotts Institutionenbegriff
Als Heuristik Zur Analyse von Geschlechterverhältnissen in Organisationen: Inspirationsquelle
„Geschlechterwissen,. ; 2017.'
apa: 'Horwath, I. (2017). Scotts Institutionenbegriff als Heuristik zur Analyse
von Geschlechterverhältnissen in Organisationen: Inspirationsquelle „Geschlechterwissen.
In Scotts Institutionenbegriff Als Heuristik Zur Analyse von Geschlechterverhältnissen
in Organisationen: Inspirationsquelle „Geschlechterwissen,.'
bibtex: '@inbook{Horwath_2017, title={Scotts Institutionenbegriff als Heuristik
zur Analyse von Geschlechterverhältnissen in Organisationen: Inspirationsquelle
„Geschlechterwissen}, booktitle={Scotts Institutionenbegriff Als Heuristik Zur
Analyse von Geschlechterverhältnissen in Organisationen: Inspirationsquelle „Geschlechterwissen,},
author={Horwath, Ilona}, year={2017} }'
chicago: 'Horwath, Ilona. “Scotts Institutionenbegriff Als Heuristik Zur Analyse
von Geschlechterverhältnissen in Organisationen: Inspirationsquelle „Geschlechterwissen.”
In Scotts Institutionenbegriff Als Heuristik Zur Analyse von Geschlechterverhältnissen
in Organisationen: Inspirationsquelle „Geschlechterwissen, 2017.'
ieee: 'I. Horwath, “Scotts Institutionenbegriff als Heuristik zur Analyse von Geschlechterverhältnissen
in Organisationen: Inspirationsquelle „Geschlechterwissen,” in Scotts Institutionenbegriff
Als Heuristik Zur Analyse von Geschlechterverhältnissen in Organisationen: Inspirationsquelle
„Geschlechterwissen, 2017.'
mla: 'Horwath, Ilona. “Scotts Institutionenbegriff Als Heuristik Zur Analyse von
Geschlechterverhältnissen in Organisationen: Inspirationsquelle „Geschlechterwissen.”
Scotts Institutionenbegriff Als Heuristik Zur Analyse von Geschlechterverhältnissen
in Organisationen: Inspirationsquelle „Geschlechterwissen, 2017.'
short: 'I. Horwath, in: Scotts Institutionenbegriff Als Heuristik Zur Analyse von
Geschlechterverhältnissen in Organisationen: Inspirationsquelle „Geschlechterwissen,
2017.'
date_created: 2021-09-14T10:09:29Z
date_updated: 2022-04-21T18:21:40Z
ddc:
- '300'
department:
- _id: '603'
file:
- access_level: open_access
content_type: application/pdf
creator: innem
date_created: 2021-09-14T10:07:48Z
date_updated: 2021-09-14T10:07:48Z
file_id: '24364'
file_name: Horwath_2017.pdf
file_size: 476743
relation: main_file
file_date_updated: 2021-09-14T10:07:48Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
publication: 'Scotts Institutionenbegriff Als Heuristik Zur Analyse von Geschlechterverhältnissen
in Organisationen: Inspirationsquelle „Geschlechterwissen,'
quality_controlled: '1'
status: public
title: 'Scotts Institutionenbegriff als Heuristik zur Analyse von Geschlechterverhältnissen
in Organisationen: Inspirationsquelle „Geschlechterwissen'
type: book_chapter
user_id: '83744'
year: '2017'
...
---
_id: '22038'
abstract:
- lang: eng
text: 'Micro Physiological Systems (MPS), also known as Multi-Organ-Chip, Organ-on-a-Chip,
or Body-on-a-Chip, are advanced microfluidic systems that allow the cultivation
of different types of cells and tissue in just one common circuit. Furthermore,
they thus can also adjust the interaction of these different tissues. Perspectival
MPS will replace animal testing. For fast and flexible manufacturing and marking
of MPS, a concept for a universal micromachining platform has been developed which
provides the following latest key technologies: laser micro cutting of polymer
foils, laser micro- and sub-micro-structuring of polymer foils, 3D printing of
polymer components as well as optical inspection and online process control. The
combination of different laser sources, processing optics, inspection systems,
and print heads on multiple axes allows the change and exactly positioning to
the workpiece during the process. Therewith, the realization of MPS including
3D printed components as well as direct laser interference patterned surfaces
for well-defined cell adhesion and product protection is possible. Additional
basic technologies for the generation of periodical line-like structures at polycarbonate
foils using special Direct Laser Interference Patterning (DLIP) optics as well
as for the 3D printing of fluid-tight cell culture reservoirs made of Acrylonitrile
Butadiene Styrene directly onto polycarbonate microfluidics were established.
A first prototype of the universal micromachining platform combining different
lasers with Direct Laser Writing and DLIP is shown. With this laser micro cutting
as well as laser micro-structuring of polycarbonate (PC) foils and therewith functionalization
for MPS application could be successfully demonstrated.'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: André
full_name: Hirsch, André
id: '27599'
last_name: Hirsch
- first_name: K.
full_name: Günther, K.
last_name: Günther
- first_name: F.
full_name: Sonntag, F.
last_name: Sonntag
- first_name: U.
full_name: Klotzbach, U.
last_name: Klotzbach
- first_name: A.F.
full_name: Lasagni, A.F.
last_name: Lasagni
citation:
ama: Moritzer E, Hirsch A, Günther K, Sonntag F, Klotzbach U, Lasagni AF. Universal
Micromachining Platform and Basic Technologies for the Manufacture and Marking
of Microphysiological Systems. Micromachines. 2017;8(246). doi:10.3390/mi8080246
apa: Moritzer, E., Hirsch, A., Günther, K., Sonntag, F., Klotzbach, U., & Lasagni,
A. F. (2017). Universal Micromachining Platform and Basic Technologies for the
Manufacture and Marking of Microphysiological Systems. Micromachines, 8(246).
https://doi.org/10.3390/mi8080246
bibtex: '@article{Moritzer_Hirsch_Günther_Sonntag_Klotzbach_Lasagni_2017, title={Universal
Micromachining Platform and Basic Technologies for the Manufacture and Marking
of Microphysiological Systems}, volume={8}, DOI={10.3390/mi8080246},
number={246}, journal={Micromachines}, publisher={MDPI}, author={Moritzer, Elmar
and Hirsch, André and Günther, K. and Sonntag, F. and Klotzbach, U. and Lasagni,
A.F.}, year={2017} }'
chicago: Moritzer, Elmar, André Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and
A.F. Lasagni. “Universal Micromachining Platform and Basic Technologies for the
Manufacture and Marking of Microphysiological Systems.” Micromachines 8,
no. 246 (2017). https://doi.org/10.3390/mi8080246.
ieee: 'E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, and A. F. Lasagni,
“Universal Micromachining Platform and Basic Technologies for the Manufacture
and Marking of Microphysiological Systems,” Micromachines, vol. 8, no.
246, 2017, doi: 10.3390/mi8080246.'
mla: Moritzer, Elmar, et al. “Universal Micromachining Platform and Basic Technologies
for the Manufacture and Marking of Microphysiological Systems.” Micromachines,
vol. 8, no. 246, MDPI, 2017, doi:10.3390/mi8080246.
short: E. Moritzer, A. Hirsch, K. Günther, F. Sonntag, U. Klotzbach, A.F. Lasagni,
Micromachines 8 (2017).
date_created: 2021-05-07T13:23:20Z
date_updated: 2022-04-25T08:02:49Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.3390/mi8080246
intvolume: ' 8'
issue: '246'
language:
- iso: eng
publication: Micromachines
publisher: MDPI
quality_controlled: '1'
status: public
title: Universal Micromachining Platform and Basic Technologies for the Manufacture
and Marking of Microphysiological Systems
type: journal_article
user_id: '70729'
volume: 8
year: '2017'
...
---
_id: '22033'
abstract:
- lang: eng
text: The mechanical characterization of fused deposition modeling (FDM) parts is
mostly done by static tests. In many applications, parts are also dynamically
loaded. Here, fatigue tests can help to identify the expected lifetime of a part.
This article discusses the fatigue behavior of FDM specimens manufactured with
Ultem 9085. For this, tensile bars are manufactured according to ASTM D638 in
different build orientations. Tests are performed in a range of pulsating tensile
stresses, and S-N curves are documented for different build orientations. For
higher loads, the FDM anisotropy characterizes the lifetime of used specimens,
which is similar to static tensile bars. For lower loads, including a higher number
of cycles to failure, S-N curves of different build orientations converge. In
further tests, tensile bars were chemically smoothed with chloroform vapor. Chemical
smoothing reduces surface roughness and increases tensile strength of specimens
in the upright build direction. Fatigue tests of chemically treated specimens
show no significant lifetime increase.
author:
- first_name: M.
full_name: Fischer, M.
last_name: Fischer
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Fischer M, Schöppner V. Fatigue Behavior of FDM Parts Manufactured with Ultem
9085. JOM: The Journal of The Minerals Metals & Materials Society (TMS).
Published online 2017:563-568. doi:10.1007/s11837-016-2197-2'
apa: 'Fischer, M., & Schöppner, V. (2017). Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085. JOM: The Journal of The Minerals. Metals & Materials Society
(TMS), 563–568. https://doi.org/10.1007/s11837-016-2197-2'
bibtex: '@article{Fischer_Schöppner_2017, title={Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085}, DOI={10.1007/s11837-016-2197-2},
journal={JOM: The Journal of The Minerals. Metals & Materials Society (TMS)},
publisher={Springer Verlag}, author={Fischer, M. and Schöppner, Volker}, year={2017},
pages={563–568} }'
chicago: 'Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials
Society (TMS), 2017, 563–68. https://doi.org/10.1007/s11837-016-2197-2.'
ieee: 'M. Fischer and V. Schöppner, “Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085,” JOM: The Journal of The Minerals. Metals & Materials
Society (TMS), pp. 563–568, 2017, doi: 10.1007/s11837-016-2197-2.'
mla: 'Fischer, M., and Volker Schöppner. “Fatigue Behavior of FDM Parts Manufactured
with Ultem 9085.” JOM: The Journal of The Minerals. Metals & Materials
Society (TMS), Springer Verlag, 2017, pp. 563–68, doi:10.1007/s11837-016-2197-2.'
short: 'M. Fischer, V. Schöppner, JOM: The Journal of The Minerals. Metals &
Materials Society (TMS) (2017) 563–568.'
date_created: 2021-05-07T13:23:14Z
date_updated: 2022-04-25T08:02:28Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1007/s11837-016-2197-2
language:
- iso: eng
page: 563-568
publication: 'JOM: The Journal of The Minerals. Metals & Materials Society (TMS)'
publisher: Springer Verlag
quality_controlled: '1'
status: public
title: Fatigue Behavior of FDM Parts Manufactured with Ultem 9085
type: journal_article
user_id: '70729'
year: '2017'
...
---
_id: '22023'
abstract:
- lang: eng
text: Fused Deposition Modeling (FDM) is an Additive Manufacturing (AM) technology
which is used for prototypes, single-part-production and also small batch productions.
For use as a final product, it is important that the parts have good mechanical
properties, a high dimensional accuracy and smooth surfaces. The knowledge of
the mechanical properties is very important for the design engineer when it comes
to the component design. In this paper, investigations were conducted with the
polymer ABS-M30 from Stratasys Inc. To achieve a quality improvement of FDM parts,
various toolpath parameters and orientations were used. Within the mechanical
properties, the tensile, flexural and impact strength were evaluated. Furthermore,
the tensile strength of FDM parts is compared to injection molded specimens. With
optimized parameters, an increase of the tensile strength by up to 28 % and a
doubling of the impact strength were possible.
author:
- first_name: F.
full_name: Knoop, F.
last_name: Knoop
- first_name: A.
full_name: Kloke, A.
last_name: Kloke
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Knoop F, Kloke A, Schöppner V. Quality Improvement of FDM Parts by Parameter
Optimization . In: 32nd International Conference of the Polymer Processing
Society. Vol 32. American Institute of Physics; 2017. doi:10.1063/1.5016790'
apa: Knoop, F., Kloke, A., & Schöppner, V. (2017). Quality Improvement of FDM
Parts by Parameter Optimization . 32nd International Conference of the Polymer
Processing Society, 32. https://doi.org/10.1063/1.5016790
bibtex: '@inproceedings{Knoop_Kloke_Schöppner_2017, title={Quality Improvement of
FDM Parts by Parameter Optimization }, volume={32}, DOI={10.1063/1.5016790},
booktitle={32nd International Conference of the Polymer Processing Society}, publisher={American
Institute of Physics}, author={Knoop, F. and Kloke, A. and Schöppner, Volker},
year={2017} }'
chicago: Knoop, F., A. Kloke, and Volker Schöppner. “Quality Improvement of FDM
Parts by Parameter Optimization .” In 32nd International Conference of the
Polymer Processing Society, Vol. 32. American Institute of Physics, 2017.
https://doi.org/10.1063/1.5016790.
ieee: 'F. Knoop, A. Kloke, and V. Schöppner, “Quality Improvement of FDM Parts by
Parameter Optimization ,” in 32nd International Conference of the Polymer Processing
Society, 2017, vol. 32, doi: 10.1063/1.5016790.'
mla: Knoop, F., et al. “Quality Improvement of FDM Parts by Parameter Optimization
.” 32nd International Conference of the Polymer Processing Society, vol.
32, American Institute of Physics, 2017, doi:10.1063/1.5016790.
short: 'F. Knoop, A. Kloke, V. Schöppner, in: 32nd International Conference of the
Polymer Processing Society, American Institute of Physics, 2017.'
date_created: 2021-05-07T13:23:03Z
date_updated: 2022-04-25T08:04:50Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1063/1.5016790
intvolume: ' 32'
language:
- iso: eng
publication: 32nd International Conference of the Polymer Processing Society
publisher: American Institute of Physics
quality_controlled: '1'
status: public
title: 'Quality Improvement of FDM Parts by Parameter Optimization '
type: conference
user_id: '70729'
volume: 32
year: '2017'
...
---
_id: '27201'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Michael
full_name: Schadomsky, Michael
last_name: Schadomsky
- first_name: J.
full_name: Walter, J.
last_name: Walter
citation:
ama: 'Schöppner V, Schadomsky M, Walter J. Bestimmung der Mischgüte bei Kautschukstiftextrudern
auf Basis experimenteller und simulativer Methoden. In: 25. Fachtagung Technomer.
; 2017.'
apa: Schöppner, V., Schadomsky, M., & Walter, J. (2017). Bestimmung der Mischgüte
bei Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden.
25. Fachtagung Technomer. 25. Fachtagung Technomer, Chemnitz (Deutschland).
bibtex: '@inproceedings{Schöppner_Schadomsky_Walter_2017, place={Chemnitz (Deutschland)},
title={Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller
und simulativer Methoden}, booktitle={25. Fachtagung Technomer}, author={Schöppner,
Volker and Schadomsky, Michael and Walter, J.}, year={2017} }'
chicago: Schöppner, Volker, Michael Schadomsky, and J. Walter. “Bestimmung Der Mischgüte
Bei Kautschukstiftextrudern Auf Basis Experimenteller Und Simulativer Methoden.”
In 25. Fachtagung Technomer. Chemnitz (Deutschland), 2017.
ieee: V. Schöppner, M. Schadomsky, and J. Walter, “Bestimmung der Mischgüte bei
Kautschukstiftextrudern auf Basis experimenteller und simulativer Methoden,” presented
at the 25. Fachtagung Technomer, Chemnitz (Deutschland), 2017.
mla: Schöppner, Volker, et al. “Bestimmung Der Mischgüte Bei Kautschukstiftextrudern
Auf Basis Experimenteller Und Simulativer Methoden.” 25. Fachtagung Technomer,
2017.
short: 'V. Schöppner, M. Schadomsky, J. Walter, in: 25. Fachtagung Technomer, Chemnitz
(Deutschland), 2017.'
conference:
location: Chemnitz (Deutschland)
name: 25. Fachtagung Technomer
date_created: 2021-11-08T08:31:41Z
date_updated: 2022-07-04T14:19:34Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Chemnitz (Deutschland)
publication: 25. Fachtagung Technomer
status: public
title: Bestimmung der Mischgüte bei Kautschukstiftextrudern auf Basis experimenteller
und simulativer Methoden
type: conference
user_id: '11904'
year: '2017'
...
---
_id: '9986'
abstract:
- lang: ger
text: Das Ultraschall-Drahtbonden mit Aluminiumdraht ist aktuell ein Standardverfahren
zur Kontaktierung von Leistungshalbleitermodulen. Jedoch soll die Einführung von
Kupferdraht als Bondmaterial in der Zukunft zu zahlreichen Verbesserungen der
Module führen. Dies ist bedingt durch die wesentlich besseren elektrischen und
thermischen Eigenschaften von Kupfer gegenüber Aluminium, die dazu führen, dass
z. B. eine weitere Miniaturisierung elektrischer Komponenten möglich wird. Darüber
hinaus könnte insbesondere die Verlässlichkeit der Module signifikant verbessert
werden. Doch bisher wurde Kupferdraht trotz seiner überlegenen physikalischen
Eigenschaften im Wesentlichen nur vereinzelt eingesetzt, da der Prozess deutlich
empfindlicher auf Störgrößen reagiert. Um dennoch zuverlässige Kupferbondverbindungen
in Leistungshalbleitermodulen herstellen zu können, wird in dieser Arbeit ein
Verfahren vorgestellt, das die Herstellung von Ultraschall-Bondverbindungen mittels
modellbasierter Mehrzieloptimierung realisiert. Dazu ist umfangreiches Prozesswissen
in Form eines geeigneten Modells für den Bondprozess notwendig. Das vorgestellte
Modell ist in der Lage, alle notwendigen Effekte und den Einfluss wesentlicher
Prozessparameter detailliert abzubilden, sodass eine anschließende Mehrzieloptimierung
zur Bestimmung der pareto-optimalen Betriebspunkte und zugehörigen Prozessparameter
ermöglicht wird. Die dafür notwendigen Teilmodelle und Mehrzieloptimierungen werden
dargestellt und validiert. Überdies wird ein Prototyp in Form einer modifizierten
Bondmaschine inklusive einer Möglichkeit zur Verhaltensanpassung aufgebaut und
getestet.
author:
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
citation:
ama: Unger A. Modellbasierte Mehrzieloptimierung Zur Herstellung von Ultraschall-Drahtbondverbindungen
in Leistungshalbleitermodulen. Universität Paderborn; 2017.
apa: Unger, A. (2017). Modellbasierte Mehrzieloptimierung zur Herstellung von
Ultraschall-Drahtbondverbindungen in Leistungshalbleitermodulen. Universität
Paderborn.
bibtex: '@book{Unger_2017, title={Modellbasierte Mehrzieloptimierung zur Herstellung
von Ultraschall-Drahtbondverbindungen in Leistungshalbleitermodulen}, publisher={Universität
Paderborn}, author={Unger, Andreas}, year={2017} }'
chicago: Unger, Andreas. Modellbasierte Mehrzieloptimierung Zur Herstellung von
Ultraschall-Drahtbondverbindungen in Leistungshalbleitermodulen. Universität
Paderborn, 2017.
ieee: A. Unger, Modellbasierte Mehrzieloptimierung zur Herstellung von Ultraschall-Drahtbondverbindungen
in Leistungshalbleitermodulen. Universität Paderborn, 2017.
mla: Unger, Andreas. Modellbasierte Mehrzieloptimierung Zur Herstellung von Ultraschall-Drahtbondverbindungen
in Leistungshalbleitermodulen. Universität Paderborn, 2017.
short: A. Unger, Modellbasierte Mehrzieloptimierung Zur Herstellung von Ultraschall-Drahtbondverbindungen
in Leistungshalbleitermodulen, Universität Paderborn, 2017.
date_created: 2019-05-27T09:54:33Z
date_updated: 2022-12-07T14:35:06Z
department:
- _id: '151'
extern: '1'
keyword:
- Drahtbondverbindungen
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://digital.ub.uni-paderborn.de/hs/id/2601656
oa: '1'
publisher: Universität Paderborn
status: public
title: Modellbasierte Mehrzieloptimierung zur Herstellung von Ultraschall-Drahtbondverbindungen
in Leistungshalbleitermodulen
type: dissertation
user_id: '210'
year: '2017'
...
---
_id: '35095'
author:
- first_name: T
full_name: Kiekbusch, T
last_name: Kiekbusch
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
citation:
ama: Kiekbusch T, Magyar B. Mehrkörpersimulation als Werkzeug zur Analyse der Wälzlagerdynamik.
Konstruktion. 2017;69(10).
apa: Kiekbusch, T., & Magyar, B. (2017). Mehrkörpersimulation als Werkzeug zur
Analyse der Wälzlagerdynamik. Konstruktion, 69(10).
bibtex: '@article{Kiekbusch_Magyar_2017, title={Mehrkörpersimulation als Werkzeug
zur Analyse der Wälzlagerdynamik}, volume={69}, number={10}, journal={Konstruktion},
author={Kiekbusch, T and Magyar, Balázs}, year={2017} }'
chicago: Kiekbusch, T, and Balázs Magyar. “Mehrkörpersimulation als Werkzeug zur
Analyse der Wälzlagerdynamik.” Konstruktion 69, no. 10 (2017).
ieee: T. Kiekbusch and B. Magyar, “Mehrkörpersimulation als Werkzeug zur Analyse
der Wälzlagerdynamik,” Konstruktion, vol. 69, no. 10, 2017.
mla: Kiekbusch, T., and Balázs Magyar. “Mehrkörpersimulation als Werkzeug zur Analyse
der Wälzlagerdynamik.” Konstruktion, vol. 69, no. 10, 2017.
short: T. Kiekbusch, B. Magyar, Konstruktion 69 (2017).
date_created: 2023-01-02T10:22:20Z
date_updated: 2023-01-02T10:22:40Z
department:
- _id: '146'
extern: '1'
intvolume: ' 69'
issue: '10'
language:
- iso: ger
publication: Konstruktion
publication_identifier:
issn:
- 1436-4921
status: public
title: Mehrkörpersimulation als Werkzeug zur Analyse der Wälzlagerdynamik
type: journal_article
user_id: '38077'
volume: 69
year: '2017'
...
---
_id: '31228'
author:
- first_name: Lars
full_name: Fromme, Lars
last_name: Fromme
- first_name: Nils
full_name: Mügge, Nils
id: '72972'
last_name: Mügge
- first_name: Martin
full_name: Petry, Martin
last_name: Petry
- first_name: Andreas
full_name: Waschke, Andreas
last_name: Waschke
citation:
ama: 'Fromme L, Mügge N, Petry M, Waschke A. Modeling Fluid-Structure Interaction
in a Pressure-Controlled Current-Limiting Valve. In: 2017 COMSOL Conference.
; 2017.'
apa: Fromme, L., Mügge, N., Petry, M., & Waschke, A. (2017). Modeling Fluid-Structure
Interaction in a Pressure-Controlled Current-Limiting Valve. 2017 COMSOL Conference.
2017 COMSOL Conference, Rotterdam.
bibtex: '@inproceedings{Fromme_Mügge_Petry_Waschke_2017, title={Modeling Fluid-Structure
Interaction in a Pressure-Controlled Current-Limiting Valve}, booktitle={2017
COMSOL Conference}, author={Fromme, Lars and Mügge, Nils and Petry, Martin and
Waschke, Andreas}, year={2017} }'
chicago: Fromme, Lars, Nils Mügge, Martin Petry, and Andreas Waschke. “Modeling
Fluid-Structure Interaction in a Pressure-Controlled Current-Limiting Valve.”
In 2017 COMSOL Conference, 2017.
ieee: L. Fromme, N. Mügge, M. Petry, and A. Waschke, “Modeling Fluid-Structure Interaction
in a Pressure-Controlled Current-Limiting Valve,” presented at the 2017 COMSOL
Conference, Rotterdam, 2017.
mla: Fromme, Lars, et al. “Modeling Fluid-Structure Interaction in a Pressure-Controlled
Current-Limiting Valve.” 2017 COMSOL Conference, 2017.
short: 'L. Fromme, N. Mügge, M. Petry, A. Waschke, in: 2017 COMSOL Conference, 2017.'
conference:
end_date: 2017-10-20
location: Rotterdam
name: 2017 COMSOL Conference
start_date: 2017-10-18
date_created: 2022-05-12T08:09:15Z
date_updated: 2022-05-12T08:09:21Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
publication: 2017 COMSOL Conference
status: public
title: Modeling Fluid-Structure Interaction in a Pressure-Controlled Current-Limiting
Valve
type: conference
user_id: '72972'
year: '2017'
...