---
_id: '25140'
article_type: original
author:
- first_name: Sven
full_name: Pieper, Sven
last_name: Pieper
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Pieper S, Schmid H-J. Layer-formation of non-colloidal suspensions in a parallel
plate rheometer under steady shear. Journal of Non-Newtonian Fluid Mechanics.
Published online 2016:1-7. doi:10.1016/j.jnnfm.2016.04.004
apa: Pieper, S., & Schmid, H.-J. (2016). Layer-formation of non-colloidal suspensions
in a parallel plate rheometer under steady shear. Journal of Non-Newtonian
Fluid Mechanics, 1–7. https://doi.org/10.1016/j.jnnfm.2016.04.004
bibtex: '@article{Pieper_Schmid_2016, title={Layer-formation of non-colloidal suspensions
in a parallel plate rheometer under steady shear}, DOI={10.1016/j.jnnfm.2016.04.004},
journal={Journal of Non-Newtonian Fluid Mechanics}, author={Pieper, Sven and Schmid,
Hans-Joachim}, year={2016}, pages={1–7} }'
chicago: Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal
Suspensions in a Parallel Plate Rheometer under Steady Shear.” Journal of Non-Newtonian
Fluid Mechanics, 2016, 1–7. https://doi.org/10.1016/j.jnnfm.2016.04.004.
ieee: 'S. Pieper and H.-J. Schmid, “Layer-formation of non-colloidal suspensions
in a parallel plate rheometer under steady shear,” Journal of Non-Newtonian
Fluid Mechanics, pp. 1–7, 2016, doi: 10.1016/j.jnnfm.2016.04.004.'
mla: Pieper, Sven, and Hans-Joachim Schmid. “Layer-Formation of Non-Colloidal Suspensions
in a Parallel Plate Rheometer under Steady Shear.” Journal of Non-Newtonian
Fluid Mechanics, 2016, pp. 1–7, doi:10.1016/j.jnnfm.2016.04.004.
short: S. Pieper, H.-J. Schmid, Journal of Non-Newtonian Fluid Mechanics (2016)
1–7.
date_created: 2021-09-29T14:21:35Z
date_updated: 2023-04-27T11:21:10Z
department:
- _id: '150'
doi: 10.1016/j.jnnfm.2016.04.004
language:
- iso: eng
page: 1-7
publication: Journal of Non-Newtonian Fluid Mechanics
publication_identifier:
issn:
- 0377-0257
publication_status: published
quality_controlled: '1'
status: public
title: Layer-formation of non-colloidal suspensions in a parallel plate rheometer
under steady shear
type: journal_article
user_id: '3959'
year: '2016'
...
---
_id: '41533'
author:
- first_name: Wadim
full_name: Reschetnik, Wadim
last_name: Reschetnik
- first_name: Jan-Peter
full_name: Brüggemann, Jan-Peter
last_name: Brüggemann
- first_name: Mehmet Esat
full_name: Aydinöz, Mehmet Esat
last_name: Aydinöz
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Gunter
full_name: Kullmer, Gunter
id: '291'
last_name: Kullmer
- first_name: Hans-Albert
full_name: Richard, Hans-Albert
last_name: Richard
citation:
ama: Reschetnik W, Brüggemann J-P, Aydinöz ME, et al. Fatigue crack growth behavior
and mechanical properties of additively processed EN AW-7075 aluminium alloy.
Procedia Structural Integrity. 2016;2:3040-3048. doi:10.1016/j.prostr.2016.06.380
apa: Reschetnik, W., Brüggemann, J.-P., Aydinöz, M. E., Grydin, O., Hoyer, K.-P.,
Kullmer, G., & Richard, H.-A. (2016). Fatigue crack growth behavior and mechanical
properties of additively processed EN AW-7075 aluminium alloy. Procedia Structural
Integrity, 2, 3040–3048. https://doi.org/10.1016/j.prostr.2016.06.380
bibtex: '@article{Reschetnik_Brüggemann_Aydinöz_Grydin_Hoyer_Kullmer_Richard_2016,
title={Fatigue crack growth behavior and mechanical properties of additively processed
EN AW-7075 aluminium alloy}, volume={2}, DOI={10.1016/j.prostr.2016.06.380},
journal={Procedia Structural Integrity}, publisher={Elsevier BV}, author={Reschetnik,
Wadim and Brüggemann, Jan-Peter and Aydinöz, Mehmet Esat and Grydin, Olexandr
and Hoyer, Kay-Peter and Kullmer, Gunter and Richard, Hans-Albert}, year={2016},
pages={3040–3048} }'
chicago: 'Reschetnik, Wadim, Jan-Peter Brüggemann, Mehmet Esat Aydinöz, Olexandr
Grydin, Kay-Peter Hoyer, Gunter Kullmer, and Hans-Albert Richard. “Fatigue Crack
Growth Behavior and Mechanical Properties of Additively Processed EN AW-7075 Aluminium
Alloy.” Procedia Structural Integrity 2 (2016): 3040–48. https://doi.org/10.1016/j.prostr.2016.06.380.'
ieee: 'W. Reschetnik et al., “Fatigue crack growth behavior and mechanical
properties of additively processed EN AW-7075 aluminium alloy,” Procedia Structural
Integrity, vol. 2, pp. 3040–3048, 2016, doi: 10.1016/j.prostr.2016.06.380.'
mla: Reschetnik, Wadim, et al. “Fatigue Crack Growth Behavior and Mechanical Properties
of Additively Processed EN AW-7075 Aluminium Alloy.” Procedia Structural Integrity,
vol. 2, Elsevier BV, 2016, pp. 3040–48, doi:10.1016/j.prostr.2016.06.380.
short: W. Reschetnik, J.-P. Brüggemann, M.E. Aydinöz, O. Grydin, K.-P. Hoyer, G.
Kullmer, H.-A. Richard, Procedia Structural Integrity 2 (2016) 3040–3048.
date_created: 2023-02-02T14:49:52Z
date_updated: 2023-04-27T16:50:06Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.prostr.2016.06.380
intvolume: ' 2'
keyword:
- General Engineering
- Energy Engineering and Power Technology
language:
- iso: eng
page: 3040-3048
publication: Procedia Structural Integrity
publication_identifier:
issn:
- 2452-3216
publication_status: published
publisher: Elsevier BV
status: public
title: Fatigue crack growth behavior and mechanical properties of additively processed
EN AW-7075 aluminium alloy
type: journal_article
user_id: '48411'
volume: 2
year: '2016'
...
---
_id: '41532'
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Christoph
full_name: Schaak, Christoph
last_name: Schaak
- first_name: J.
full_name: Nellesen, J.
last_name: Nellesen
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Mehmet Esat
full_name: Aydinöz, Mehmet Esat
last_name: Aydinöz
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic
pressing of IN718 components manufactured by selective laser melting. Additive
Manufacturing. 2016;13:93-102. doi:10.1016/j.addma.2016.11.006
apa: Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., &
Hoyer, K.-P. (2016). Hot isostatic pressing of IN718 components manufactured by
selective laser melting. Additive Manufacturing, 13, 93–102. https://doi.org/10.1016/j.addma.2016.11.006
bibtex: '@article{Tillmann_Schaak_Nellesen_Schaper_Aydinöz_Hoyer_2016, title={Hot
isostatic pressing of IN718 components manufactured by selective laser melting},
volume={13}, DOI={10.1016/j.addma.2016.11.006},
journal={Additive Manufacturing}, publisher={Elsevier BV}, author={Tillmann, Wolfgang
and Schaak, Christoph and Nellesen, J. and Schaper, Mirko and Aydinöz, Mehmet
Esat and Hoyer, Kay-Peter}, year={2016}, pages={93–102} }'
chicago: 'Tillmann, Wolfgang, Christoph Schaak, J. Nellesen, Mirko Schaper, Mehmet
Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components
Manufactured by Selective Laser Melting.” Additive Manufacturing 13 (2016):
93–102. https://doi.org/10.1016/j.addma.2016.11.006.'
ieee: 'W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P.
Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser
melting,” Additive Manufacturing, vol. 13, pp. 93–102, 2016, doi: 10.1016/j.addma.2016.11.006.'
mla: Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured
by Selective Laser Melting.” Additive Manufacturing, vol. 13, Elsevier
BV, 2016, pp. 93–102, doi:10.1016/j.addma.2016.11.006.
short: W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer,
Additive Manufacturing 13 (2016) 93–102.
date_created: 2023-02-02T14:49:08Z
date_updated: 2023-04-27T16:50:19Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.addma.2016.11.006
intvolume: ' 13'
keyword:
- Industrial and Manufacturing Engineering
- Engineering (miscellaneous)
- General Materials Science
- Biomedical Engineering
language:
- iso: eng
page: 93-102
publication: Additive Manufacturing
publication_identifier:
issn:
- 2214-8604
publication_status: published
publisher: Elsevier BV
status: public
title: Hot isostatic pressing of IN718 components manufactured by selective laser
melting
type: journal_article
user_id: '48411'
volume: 13
year: '2016'
...
---
_id: '23035'
author:
- first_name: Julian
full_name: Eckstein, Julian
last_name: Eckstein
- first_name: Christopher
full_name: Lüke, Christopher
id: '22675'
last_name: Lüke
- first_name: Frederik
full_name: Brunstein, Frederik
last_name: Brunstein
- first_name: Patrick
full_name: Friedel, Patrick
last_name: Friedel
- first_name: Ulrich
full_name: Köhler, Ulrich
last_name: Köhler
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Eckstein J, Lüke C, Brunstein F, Friedel P, Köhler U, Trächtler A. A Novel
Approach Using Model Predictive Control to Enhance the Range of Electric Vehicles.
In: 3rd International Conference on System-Integrated Intelligence: New Challenges
for Product and Production Engineering, SysInt 2016. ; 2016.'
apa: 'Eckstein, J., Lüke, C., Brunstein, F., Friedel, P., Köhler, U., & Trächtler,
A. (2016). A Novel Approach Using Model Predictive Control to Enhance the Range
of Electric Vehicles. 3rd International Conference on System-Integrated Intelligence:
New Challenges for Product and Production Engineering, SysInt 2016.'
bibtex: '@inproceedings{Eckstein_Lüke_Brunstein_Friedel_Köhler_Trächtler_2016, place={Paderborn,
Germany}, title={A Novel Approach Using Model Predictive Control to Enhance the
Range of Electric Vehicles}, booktitle={3rd International Conference on System-integrated
Intelligence: New Challenges for Product and Production Engineering, SysInt 2016},
author={Eckstein, Julian and Lüke, Christopher and Brunstein, Frederik and Friedel,
Patrick and Köhler, Ulrich and Trächtler, Ansgar}, year={2016} }'
chicago: 'Eckstein, Julian, Christopher Lüke, Frederik Brunstein, Patrick Friedel,
Ulrich Köhler, and Ansgar Trächtler. “A Novel Approach Using Model Predictive
Control to Enhance the Range of Electric Vehicles.” In 3rd International Conference
on System-Integrated Intelligence: New Challenges for Product and Production Engineering,
SysInt 2016. Paderborn, Germany, 2016.'
ieee: J. Eckstein, C. Lüke, F. Brunstein, P. Friedel, U. Köhler, and A. Trächtler,
“A Novel Approach Using Model Predictive Control to Enhance the Range of Electric
Vehicles,” 2016.
mla: 'Eckstein, Julian, et al. “A Novel Approach Using Model Predictive Control
to Enhance the Range of Electric Vehicles.” 3rd International Conference on
System-Integrated Intelligence: New Challenges for Product and Production Engineering,
SysInt 2016, 2016.'
short: 'J. Eckstein, C. Lüke, F. Brunstein, P. Friedel, U. Köhler, A. Trächtler,
in: 3rd International Conference on System-Integrated Intelligence: New Challenges
for Product and Production Engineering, SysInt 2016, Paderborn, Germany, 2016.'
date_created: 2021-08-09T06:34:19Z
date_updated: 2023-05-03T07:11:06Z
department:
- _id: '153'
language:
- iso: eng
place: Paderborn, Germany
publication: '3rd International Conference on System-integrated Intelligence: New
Challenges for Product and Production Engineering, SysInt 2016'
quality_controlled: '1'
status: public
title: A Novel Approach Using Model Predictive Control to Enhance the Range of Electric
Vehicles
type: conference
user_id: '22675'
year: '2016'
...
---
_id: '15963'
author:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Carolin
full_name: Zinn, Carolin
last_name: Zinn
- first_name: Zheng
full_name: Wang, Zheng
last_name: Wang
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
citation:
ama: Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface
pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured
by resin transfer moulding. International Journal of Automotive Composites.
2016;2:272-298. doi:10.1504/ijautoc.2016.10005305
apa: Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C.,
Zinn, C., Wang, Z., & Dammann, C. (2016). Influences of interface and surface
pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured
by resin transfer moulding. International Journal of Automotive Composites,
2, 272–298. https://doi.org/10.1504/ijautoc.2016.10005305
bibtex: '@article{Tröster_Schaper_Meschut_Mahnken_Bobbert_Lauter_Zinn_Wang_Dammann_2016,
title={Influences of interface and surface pretreatment on the mechanical properties
of metal-CFRP hybrid structures manufactured by resin transfer moulding}, volume={2},
DOI={10.1504/ijautoc.2016.10005305},
journal={International Journal of Automotive Composites}, author={Tröster, Thomas
and Schaper, Mirko and Meschut, Gerson and Mahnken, Rolf and Bobbert, Mathias
and Lauter, Christian and Zinn, Carolin and Wang, Zheng and Dammann, Christian},
year={2016}, pages={272–298} }'
chicago: 'Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias
Bobbert, Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences
of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP
Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal
of Automotive Composites 2 (2016): 272–98. https://doi.org/10.1504/ijautoc.2016.10005305.'
ieee: 'T. Tröster et al., “Influences of interface and surface pretreatment
on the mechanical properties of metal-CFRP hybrid structures manufactured by resin
transfer moulding,” International Journal of Automotive Composites, vol.
2, pp. 272–298, 2016, doi: 10.1504/ijautoc.2016.10005305.'
mla: Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on
the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin
Transfer Moulding.” International Journal of Automotive Composites, vol.
2, 2016, pp. 272–98, doi:10.1504/ijautoc.2016.10005305.
short: T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C.
Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites 2 (2016)
272–298.
date_created: 2020-02-21T14:38:35Z
date_updated: 2023-05-24T08:27:20Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1504/ijautoc.2016.10005305
intvolume: ' 2'
language:
- iso: eng
page: 272-298
publication: International Journal of Automotive Composites
publication_identifier:
issn:
- 2051-8218
- 2051-8226
publication_status: published
status: public
title: Influences of interface and surface pretreatment on the mechanical properties
of metal-CFRP hybrid structures manufactured by resin transfer moulding
type: journal_article
user_id: '72008'
volume: 2
year: '2016'
...
---
_id: '16265'
author:
- first_name: C.
full_name: Zinn, C.
last_name: Zinn
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: C.
full_name: Dammann, C.
last_name: Dammann
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Zinn C, Bobbert M, Dammann C, et al. Laserbehandlung intrinsisch gefertigter
Hybride - strukturelle, mechanische und korrosive Eigenschaften. In: ; 2016.'
apa: Zinn, C., Bobbert, M., Dammann, C., Wang, Z., Schaper, M., Meschut, G., Mahnken,
R., & Tröster, T. (2016). Laserbehandlung intrinsisch gefertigter Hybride
- strukturelle, mechanische und korrosive Eigenschaften. EuroHybrid, Kaiserslautern.
bibtex: '@inproceedings{Zinn_Bobbert_Dammann_Wang_Schaper_Meschut_Mahnken_Tröster_2016,
title={Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische
und korrosive Eigenschaften}, author={Zinn, C. and Bobbert, Mathias and Dammann,
C. and Wang, Z. and Schaper, Mirko and Meschut, Gerson and Mahnken, Rolf and Tröster,
Thomas}, year={2016} }'
chicago: Zinn, C., Mathias Bobbert, C. Dammann, Z. Wang, Mirko Schaper, Gerson Meschut,
Rolf Mahnken, and Thomas Tröster. “Laserbehandlung intrinsisch gefertigter Hybride
- strukturelle, mechanische und korrosive Eigenschaften,” 2016.
ieee: C. Zinn et al., “Laserbehandlung intrinsisch gefertigter Hybride -
strukturelle, mechanische und korrosive Eigenschaften,” presented at the EuroHybrid,
Kaiserslautern, 2016.
mla: Zinn, C., et al. Laserbehandlung intrinsisch gefertigter Hybride - strukturelle,
mechanische und korrosive Eigenschaften. 2016.
short: 'C. Zinn, M. Bobbert, C. Dammann, Z. Wang, M. Schaper, G. Meschut, R. Mahnken,
T. Tröster, in: 2016.'
conference:
end_date: 2016-04-21
location: Kaiserslautern
name: EuroHybrid
start_date: 2016-04-20
date_created: 2020-03-09T09:30:43Z
date_updated: 2023-05-24T08:27:45Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
status: public
title: Laserbehandlung intrinsisch gefertigter Hybride - strukturelle, mechanische
und korrosive Eigenschaften
type: conference
user_id: '72008'
year: '2016'
...
---
_id: '16143'
article_number: '244'
author:
- first_name: Kay André
full_name: Weidenmann, Kay André
last_name: Weidenmann
- first_name: Florentin
full_name: Pottmeyer, Florentin
last_name: Pottmeyer
- first_name: Zheng
full_name: Wang, Zheng
last_name: Wang
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Dieter
full_name: Meiners, Dieter
last_name: Meiners
- first_name: Carolin
full_name: Zinn, Carolin
last_name: Zinn
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Jonathan Serna
full_name: Gonzalez, Jonathan Serna
last_name: Gonzalez
citation:
ama: 'Weidenmann KA, Pottmeyer F, Wang Z, et al. Shear edge tests: a benchmark in
investigating the influence of different surface pretreatment methods on the shear
stress of intrinsically manufactured metal-CFRP hybrids. International Journal
of Automotive Composites. Published online 2016. doi:10.1504/ijautoc.2016.10005303'
apa: 'Weidenmann, K. A., Pottmeyer, F., Wang, Z., Tröster, T., Meiners, D., Zinn,
C., Schaper, M., & Gonzalez, J. S. (2016). Shear edge tests: a benchmark in
investigating the influence of different surface pretreatment methods on the shear
stress of intrinsically manufactured metal-CFRP hybrids. International Journal
of Automotive Composites, Article 244. https://doi.org/10.1504/ijautoc.2016.10005303'
bibtex: '@article{Weidenmann_Pottmeyer_Wang_Tröster_Meiners_Zinn_Schaper_Gonzalez_2016,
title={Shear edge tests: a benchmark in investigating the influence of different
surface pretreatment methods on the shear stress of intrinsically manufactured
metal-CFRP hybrids}, DOI={10.1504/ijautoc.2016.10005303},
number={244}, journal={International Journal of Automotive Composites}, author={Weidenmann,
Kay André and Pottmeyer, Florentin and Wang, Zheng and Tröster, Thomas and Meiners,
Dieter and Zinn, Carolin and Schaper, Mirko and Gonzalez, Jonathan Serna}, year={2016}
}'
chicago: 'Weidenmann, Kay André, Florentin Pottmeyer, Zheng Wang, Thomas Tröster,
Dieter Meiners, Carolin Zinn, Mirko Schaper, and Jonathan Serna Gonzalez. “Shear
Edge Tests: A Benchmark in Investigating the Influence of Different Surface Pretreatment
Methods on the Shear Stress of Intrinsically Manufactured Metal-CFRP Hybrids.”
International Journal of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005303.'
ieee: 'K. A. Weidenmann et al., “Shear edge tests: a benchmark in investigating
the influence of different surface pretreatment methods on the shear stress of
intrinsically manufactured metal-CFRP hybrids,” International Journal of Automotive
Composites, Art. no. 244, 2016, doi: 10.1504/ijautoc.2016.10005303.'
mla: 'Weidenmann, Kay André, et al. “Shear Edge Tests: A Benchmark in Investigating
the Influence of Different Surface Pretreatment Methods on the Shear Stress of
Intrinsically Manufactured Metal-CFRP Hybrids.” International Journal of Automotive
Composites, 244, 2016, doi:10.1504/ijautoc.2016.10005303.'
short: K.A. Weidenmann, F. Pottmeyer, Z. Wang, T. Tröster, D. Meiners, C. Zinn,
M. Schaper, J.S. Gonzalez, International Journal of Automotive Composites (2016).
date_created: 2020-02-27T15:59:58Z
date_updated: 2023-06-01T14:24:51Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1504/ijautoc.2016.10005303
language:
- iso: eng
publication: International Journal of Automotive Composites
publication_identifier:
issn:
- 2051-8218
- 2051-8226
publication_status: published
quality_controlled: '1'
status: public
title: 'Shear edge tests: a benchmark in investigating the influence of different
surface pretreatment methods on the shear stress of intrinsically manufactured metal-CFRP
hybrids'
type: journal_article
user_id: '43720'
year: '2016'
...
---
_id: '16141'
article_number: '272'
author:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Carolin
full_name: Zinn, Carolin
last_name: Zinn
- first_name: Zheng
full_name: Wang, Zheng
last_name: Wang
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
citation:
ama: Tröster T, Schaper M, Meschut G, et al. Influences of interface and surface
pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured
by resin transfer moulding. International Journal of Automotive Composites.
Published online 2016. doi:10.1504/ijautoc.2016.10005305
apa: Tröster, T., Schaper, M., Meschut, G., Mahnken, R., Bobbert, M., Lauter, C.,
Zinn, C., Wang, Z., & Dammann, C. (2016). Influences of interface and surface
pretreatment on the mechanical properties of metal-CFRP hybrid structures manufactured
by resin transfer moulding. International Journal of Automotive Composites,
Article 272. https://doi.org/10.1504/ijautoc.2016.10005305
bibtex: '@article{Tröster_Schaper_Meschut_Mahnken_Bobbert_Lauter_Zinn_Wang_Dammann_2016,
title={Influences of interface and surface pretreatment on the mechanical properties
of metal-CFRP hybrid structures manufactured by resin transfer moulding}, DOI={10.1504/ijautoc.2016.10005305},
number={272}, journal={International Journal of Automotive Composites}, author={Tröster,
Thomas and Schaper, Mirko and Meschut, Gerson and Mahnken, Rolf and Bobbert, Mathias
and Lauter, Christian and Zinn, Carolin and Wang, Zheng and Dammann, Christian},
year={2016} }'
chicago: Tröster, Thomas, Mirko Schaper, Gerson Meschut, Rolf Mahnken, Mathias Bobbert,
Christian Lauter, Carolin Zinn, Zheng Wang, and Christian Dammann. “Influences
of Interface and Surface Pretreatment on the Mechanical Properties of Metal-CFRP
Hybrid Structures Manufactured by Resin Transfer Moulding.” International Journal
of Automotive Composites, 2016. https://doi.org/10.1504/ijautoc.2016.10005305.
ieee: 'T. Tröster et al., “Influences of interface and surface pretreatment
on the mechanical properties of metal-CFRP hybrid structures manufactured by resin
transfer moulding,” International Journal of Automotive Composites, Art.
no. 272, 2016, doi: 10.1504/ijautoc.2016.10005305.'
mla: Tröster, Thomas, et al. “Influences of Interface and Surface Pretreatment on
the Mechanical Properties of Metal-CFRP Hybrid Structures Manufactured by Resin
Transfer Moulding.” International Journal of Automotive Composites, 272,
2016, doi:10.1504/ijautoc.2016.10005305.
short: T. Tröster, M. Schaper, G. Meschut, R. Mahnken, M. Bobbert, C. Lauter, C.
Zinn, Z. Wang, C. Dammann, International Journal of Automotive Composites (2016).
date_created: 2020-02-27T15:56:46Z
date_updated: 2023-06-01T14:24:36Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1504/ijautoc.2016.10005305
language:
- iso: eng
publication: International Journal of Automotive Composites
publication_identifier:
issn:
- 2051-8218
- 2051-8226
publication_status: published
quality_controlled: '1'
status: public
title: Influences of interface and surface pretreatment on the mechanical properties
of metal-CFRP hybrid structures manufactured by resin transfer moulding
type: journal_article
user_id: '43720'
year: '2016'
...
---
_id: '24110'
author:
- first_name: Wolfgang
full_name: Tillmann, Wolfgang
last_name: Tillmann
- first_name: Christopher
full_name: Schaak, Christopher
last_name: Schaak
- first_name: Jens
full_name: Nellesen, Jens
last_name: Nellesen
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Mehmet Esat
full_name: Aydinöz, Mehmet Esat
last_name: Aydinöz
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
citation:
ama: Tillmann W, Schaak C, Nellesen J, Schaper M, Aydinöz ME, Hoyer K-P. Hot isostatic
pressing of IN718 components manufactured by selective laser melting. Additive
Manufacturing. Published online 2016:93-102. doi:10.1016/j.addma.2016.11.006
apa: Tillmann, W., Schaak, C., Nellesen, J., Schaper, M., Aydinöz, M. E., &
Hoyer, K.-P. (2016). Hot isostatic pressing of IN718 components manufactured by
selective laser melting. Additive Manufacturing, 93–102. https://doi.org/10.1016/j.addma.2016.11.006
bibtex: '@article{Tillmann_Schaak_Nellesen_Schaper_Aydinöz_Hoyer_2016, title={Hot
isostatic pressing of IN718 components manufactured by selective laser melting},
DOI={10.1016/j.addma.2016.11.006},
journal={Additive Manufacturing}, author={Tillmann, Wolfgang and Schaak, Christopher
and Nellesen, Jens and Schaper, Mirko and Aydinöz, Mehmet Esat and Hoyer, Kay-Peter},
year={2016}, pages={93–102} }'
chicago: Tillmann, Wolfgang, Christopher Schaak, Jens Nellesen, Mirko Schaper, Mehmet
Esat Aydinöz, and Kay-Peter Hoyer. “Hot Isostatic Pressing of IN718 Components
Manufactured by Selective Laser Melting.” Additive Manufacturing, 2016,
93–102. https://doi.org/10.1016/j.addma.2016.11.006.
ieee: 'W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M. E. Aydinöz, and K.-P.
Hoyer, “Hot isostatic pressing of IN718 components manufactured by selective laser
melting,” Additive Manufacturing, pp. 93–102, 2016, doi: 10.1016/j.addma.2016.11.006.'
mla: Tillmann, Wolfgang, et al. “Hot Isostatic Pressing of IN718 Components Manufactured
by Selective Laser Melting.” Additive Manufacturing, 2016, pp. 93–102,
doi:10.1016/j.addma.2016.11.006.
short: W. Tillmann, C. Schaak, J. Nellesen, M. Schaper, M.E. Aydinöz, K.-P. Hoyer,
Additive Manufacturing (2016) 93–102.
date_created: 2021-09-10T07:20:15Z
date_updated: 2023-06-01T14:24:11Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.addma.2016.11.006
language:
- iso: eng
page: 93-102
publication: Additive Manufacturing
publication_identifier:
issn:
- 2214-8604
publication_status: published
quality_controlled: '1'
status: public
title: Hot isostatic pressing of IN718 components manufactured by selective laser
melting
type: journal_article
user_id: '43720'
year: '2016'
...
---
_id: '23905'
author:
- first_name: Anatolii
full_name: Andreiev, Anatolii
id: '50215'
last_name: Andreiev
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: Andreiev A, Grydin O, Schaper M. Evolution of Microstructure and Properties
of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching. steel
research international. Published online 2016:1733-1741. doi:10.1002/srin.201600086
apa: Andreiev, A., Grydin, O., & Schaper, M. (2016). Evolution of Microstructure
and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching.
Steel Research International, 1733–1741. https://doi.org/10.1002/srin.201600086
bibtex: '@article{Andreiev_Grydin_Schaper_2016, title={Evolution of Microstructure
and Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching},
DOI={10.1002/srin.201600086},
journal={steel research international}, author={Andreiev, Anatolii and Grydin,
Olexandr and Schaper, Mirko}, year={2016}, pages={1733–1741} }'
chicago: Andreiev, Anatolii, Olexandr Grydin, and Mirko Schaper. “Evolution of Microstructure
and Properties of Steel 22MnB5 Due to Short Austenitization with Subsequent Quenching.”
Steel Research International, 2016, 1733–41. https://doi.org/10.1002/srin.201600086.
ieee: 'A. Andreiev, O. Grydin, and M. Schaper, “Evolution of Microstructure and
Properties of Steel 22MnB5 due to Short Austenitization with Subsequent Quenching,”
steel research international, pp. 1733–1741, 2016, doi: 10.1002/srin.201600086.'
mla: Andreiev, Anatolii, et al. “Evolution of Microstructure and Properties of Steel
22MnB5 Due to Short Austenitization with Subsequent Quenching.” Steel Research
International, 2016, pp. 1733–41, doi:10.1002/srin.201600086.
short: A. Andreiev, O. Grydin, M. Schaper, Steel Research International (2016) 1733–1741.
date_created: 2021-09-08T07:31:05Z
date_updated: 2023-06-01T14:25:10Z
department:
- _id: '158'
- _id: '321'
doi: 10.1002/srin.201600086
language:
- iso: eng
page: 1733-1741
publication: steel research international
publication_identifier:
issn:
- 1611-3683
publication_status: published
quality_controlled: '1'
status: public
title: Evolution of Microstructure and Properties of Steel 22MnB5 due to Short Austenitization
with Subsequent Quenching
type: journal_article
user_id: '43720'
year: '2016'
...
---
_id: '19391'
author:
- first_name: G.
full_name: Schwarzkopf, G.
last_name: Schwarzkopf
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: A.
full_name: Matzenmiller, A.
last_name: Matzenmiller
citation:
ama: Schwarzkopf G, Bobbert M, Teutenberg D, Meschut G, Matzenmiller A. Tolerance
Analysis of Adhesive Bonds in Crash Simulation. Procedia CIRP. Published
online 2016:321-326. doi:10.1016/j.procir.2016.02.151
apa: Schwarzkopf, G., Bobbert, M., Teutenberg, D., Meschut, G., & Matzenmiller,
A. (2016). Tolerance Analysis of Adhesive Bonds in Crash Simulation. Procedia
CIRP, 321–326. https://doi.org/10.1016/j.procir.2016.02.151
bibtex: '@article{Schwarzkopf_Bobbert_Teutenberg_Meschut_Matzenmiller_2016, title={Tolerance
Analysis of Adhesive Bonds in Crash Simulation}, DOI={10.1016/j.procir.2016.02.151},
journal={Procedia CIRP}, author={Schwarzkopf, G. and Bobbert, Mathias and Teutenberg,
Dominik and Meschut, Gerson and Matzenmiller, A.}, year={2016}, pages={321–326}
}'
chicago: Schwarzkopf, G., Mathias Bobbert, Dominik Teutenberg, Gerson Meschut, and
A. Matzenmiller. “Tolerance Analysis of Adhesive Bonds in Crash Simulation.” Procedia
CIRP, 2016, 321–26. https://doi.org/10.1016/j.procir.2016.02.151.
ieee: 'G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, and A. Matzenmiller,
“Tolerance Analysis of Adhesive Bonds in Crash Simulation,” Procedia CIRP,
pp. 321–326, 2016, doi: 10.1016/j.procir.2016.02.151.'
mla: Schwarzkopf, G., et al. “Tolerance Analysis of Adhesive Bonds in Crash Simulation.”
Procedia CIRP, 2016, pp. 321–26, doi:10.1016/j.procir.2016.02.151.
short: G. Schwarzkopf, M. Bobbert, D. Teutenberg, G. Meschut, A. Matzenmiller, Procedia
CIRP (2016) 321–326.
date_created: 2020-09-14T12:41:12Z
date_updated: 2023-06-06T14:29:57Z
department:
- _id: '157'
doi: 10.1016/j.procir.2016.02.151
language:
- iso: eng
page: 321-326
publication: Procedia CIRP
publication_identifier:
issn:
- 2212-8271
publication_status: published
status: public
title: Tolerance Analysis of Adhesive Bonds in Crash Simulation
type: journal_article
user_id: '14931'
year: '2016'
...
---
_id: '9962'
abstract:
- lang: eng
text: As the need to improve reliability, availability and safety of technical systems
increases, a large number of proactive maintenance strategies have been proposed.
Of greater interest is the development of prognostic and health management strategies
where maintenance is scheduled based on the current and the predicted future health
state of a technical system. In addition, prognostic information can be used to
control the reliability of intelligent mechatronic systems to ensure their mission
objective is achieved. Therefore methodologies for estimating these current and
future health states reliably and accurately are imperative. With the advancement
in sensor technology, majority of the present day technical systems are installed
with a network of sensors for condition or performance monitoring. This has led
to the increased application of machine learning algorithms in condition monitoring.
Depending on the sensor data available, different approaches for utilizing the
data with machine learning algorithms can be applied. However, aguide for selecting
the appropriate approach for a given system is either lacking or has not been
explored extensively. Therefore, this work aims at providing a guide for selecting
suitable approaches and machine learning algorithms for a given system depending
on the available sensor data.Five approaches for prognostics and an ensemble of
the best performing approaches are presented. Since the performance of machine
learning algorithms is highly dependent on the input features, methods for feature
extraction and selection are also presented. The approaches are evaluated and
validated with run-to-failure condition monitoring data of actual systems. This
information could serve as a guide for selecting the appropriate method for a
given kind of system depending on the available condition monitoring data.
author:
- first_name: James Kuria
full_name: Kimotho, James Kuria
last_name: Kimotho
citation:
ama: Kimotho JK. Development and Performance Evaluation of Prognostic Approaches
for Technical Systems. Shaker; 2016.
apa: Kimotho, J. K. (2016). Development and Performance Evaluation of Prognostic
Approaches for Technical Systems. Shaker.
bibtex: '@book{Kimotho_2016, title={Development and Performance Evaluation of Prognostic
Approaches for Technical Systems}, publisher={Shaker}, author={Kimotho, James
Kuria}, year={2016} }'
chicago: Kimotho, James Kuria. Development and Performance Evaluation of Prognostic
Approaches for Technical Systems. Shaker, 2016.
ieee: J. K. Kimotho, Development and Performance Evaluation of Prognostic Approaches
for Technical Systems. Shaker, 2016.
mla: Kimotho, James Kuria. Development and Performance Evaluation of Prognostic
Approaches for Technical Systems. Shaker, 2016.
short: J.K. Kimotho, Development and Performance Evaluation of Prognostic Approaches
for Technical Systems, Shaker, 2016.
date_created: 2019-05-27T09:11:54Z
date_updated: 2023-09-15T12:27:35Z
department:
- _id: '151'
language:
- iso: eng
publisher: Shaker
status: public
title: Development and Performance Evaluation of Prognostic Approaches for Technical
Systems
type: dissertation
user_id: '210'
year: '2016'
...
---
_id: '23047'
author:
- first_name: Alexander
full_name: Löffler, Alexander
last_name: Löffler
citation:
ama: Löffler A. Entwicklung Einer Modellbasierten In-the-Loop-Testumgebung Für
Waschautomaten. Heinz Nixdorf Institut; 2016.
apa: Löffler, A. (2016). Entwicklung einer modellbasierten In-the-Loop-Testumgebung
für Waschautomaten. Heinz Nixdorf Institut.
bibtex: '@book{Löffler_2016, title={Entwicklung einer modellbasierten In-the-Loop-Testumgebung
für Waschautomaten.}, publisher={Heinz Nixdorf Institut}, author={Löffler, Alexander},
year={2016} }'
chicago: Löffler, Alexander. Entwicklung Einer Modellbasierten In-the-Loop-Testumgebung
Für Waschautomaten. Heinz Nixdorf Institut, 2016.
ieee: A. Löffler, Entwicklung einer modellbasierten In-the-Loop-Testumgebung
für Waschautomaten. Heinz Nixdorf Institut, 2016.
mla: Löffler, Alexander. Entwicklung Einer Modellbasierten In-the-Loop-Testumgebung
Für Waschautomaten. Heinz Nixdorf Institut, 2016.
short: A. Löffler, Entwicklung Einer Modellbasierten In-the-Loop-Testumgebung Für
Waschautomaten., Heinz Nixdorf Institut, 2016.
date_created: 2021-08-09T06:34:33Z
date_updated: 2024-11-11T09:17:57Z
department:
- _id: '241'
- _id: '153'
language:
- iso: eng
publisher: Heinz Nixdorf Institut
status: public
supervisor:
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
title: Entwicklung einer modellbasierten In-the-Loop-Testumgebung für Waschautomaten.
type: dissertation
user_id: '5786'
year: '2016'
...
---
_id: '16138'
author:
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: C.
full_name: Dammann, C.
last_name: Dammann
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: C.
full_name: Zinn, C.
last_name: Zinn
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Bobbert M, Dammann C, Wang Z, et al. Intrinsische Herstellung hybrider Strukturkomponenten
in einen modifizierte RTM-Prozess. In: ; 2016.'
apa: Bobbert, M., Dammann, C., Wang, Z., Zinn, C., Mahnken, R., Schaper, M., &
Tröster, T. (2016). Intrinsische Herstellung hybrider Strukturkomponenten in
einen modifizierte RTM-Prozess. Faszination hybrider Leichtbau 2016, Wolfsburg.
bibtex: '@inproceedings{Bobbert_Dammann_Wang_Zinn_Mahnken_Schaper_Tröster_2016,
title={Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte
RTM-Prozess}, author={Bobbert, Mathias and Dammann, C. and Wang, Z. and Zinn,
C. and Mahnken, Rolf and Schaper, Mirko and Tröster, Thomas}, year={2016} }'
chicago: Bobbert, Mathias, C. Dammann, Z. Wang, C. Zinn, Rolf Mahnken, Mirko Schaper,
and Thomas Tröster. “Intrinsische Herstellung hybrider Strukturkomponenten in
einen modifizierte RTM-Prozess,” 2016.
ieee: M. Bobbert et al., “Intrinsische Herstellung hybrider Strukturkomponenten
in einen modifizierte RTM-Prozess,” presented at the Faszination hybrider Leichtbau
2016, Wolfsburg, 2016.
mla: Bobbert, Mathias, et al. Intrinsische Herstellung hybrider Strukturkomponenten
in einen modifizierte RTM-Prozess. 2016.
short: 'M. Bobbert, C. Dammann, Z. Wang, C. Zinn, R. Mahnken, M. Schaper, T. Tröster,
in: 2016.'
conference:
end_date: 2016-05-25
location: Wolfsburg
name: Faszination hybrider Leichtbau 2016
start_date: 2016-05-24
date_created: 2020-02-27T15:53:35Z
date_updated: 2025-05-20T06:26:37Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
publication_identifier:
isbn:
- 978-937655-40-6
quality_controlled: '1'
status: public
title: Intrinsische Herstellung hybrider Strukturkomponenten in einen modifizierte
RTM-Prozess
type: conference
user_id: '43720'
year: '2016'
...
---
_id: '16140'
abstract:
- lang: eng
text: Lightweight design in vehicles leads to an increasing use of fibre-reinforced-plastics
(FRP). To ensure the possibility of detachable joints in those constructions specific
joining technologies have to be developed. Available technologies are not suitable
for mass production or are leading to damage in the FRP. The aim of this paper
is to show the possibilities and the general feasibility of a new process approach
for the application of functional elements in FRP or hybrid materials during resin
transfer moulding (RTM) processes. Therefore the movement of the RTM-tool-punch
is utilised to produce an interlock between the splay stud and the fibres of the
non-consolidated preform. This enables the application of the elements during
the RTM-process. The resin infusion leads to the consolidation of the CFRP and
a further fixation of the splay stud. Pull-out-tests as well as torsion tests
are showing the mechanical performance of the joints.
article_number: '15'
author:
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Florian
full_name: Augethaler, Florian
last_name: Augethaler
- first_name: Zheng
full_name: Wang, Zheng
last_name: Wang
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Bobbert M, Augethaler F, Wang Z, Tröster T, Meschut G. Novel Process Approach
for in-situ Insertion of Functional Elements in RTM-Applications. Journal of
Materials Science Research. Published online 2016. doi:10.5539/jmsr.v6n1p15
apa: Bobbert, M., Augethaler, F., Wang, Z., Tröster, T., & Meschut, G. (2016).
Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications.
Journal of Materials Science Research, Article 15. https://doi.org/10.5539/jmsr.v6n1p15
bibtex: '@article{Bobbert_Augethaler_Wang_Tröster_Meschut_2016, title={Novel Process
Approach for in-situ Insertion of Functional Elements in RTM-Applications}, DOI={10.5539/jmsr.v6n1p15}, number={15},
journal={Journal of Materials Science Research}, author={Bobbert, Mathias and
Augethaler, Florian and Wang, Zheng and Tröster, Thomas and Meschut, Gerson},
year={2016} }'
chicago: Bobbert, Mathias, Florian Augethaler, Zheng Wang, Thomas Tröster, and Gerson
Meschut. “Novel Process Approach for In-Situ Insertion of Functional Elements
in RTM-Applications.” Journal of Materials Science Research, 2016. https://doi.org/10.5539/jmsr.v6n1p15.
ieee: 'M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, and G. Meschut, “Novel Process
Approach for in-situ Insertion of Functional Elements in RTM-Applications,” Journal
of Materials Science Research, Art. no. 15, 2016, doi: 10.5539/jmsr.v6n1p15.'
mla: Bobbert, Mathias, et al. “Novel Process Approach for In-Situ Insertion of Functional
Elements in RTM-Applications.” Journal of Materials Science Research, 15,
2016, doi:10.5539/jmsr.v6n1p15.
short: M. Bobbert, F. Augethaler, Z. Wang, T. Tröster, G. Meschut, Journal of Materials
Science Research (2016).
date_created: 2020-02-27T15:55:45Z
date_updated: 2025-06-06T07:44:10Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.5539/jmsr.v6n1p15
language:
- iso: eng
publication: Journal of Materials Science Research
publication_identifier:
issn:
- 1927-0593
- 1927-0585
publication_status: published
quality_controlled: '1'
status: public
title: Novel Process Approach for in-situ Insertion of Functional Elements in RTM-Applications
type: journal_article
user_id: '15952'
year: '2016'
...
---
_id: '15962'
author:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Alan Adam
full_name: Camberg, Alan Adam
id: '60544'
last_name: Camberg
- first_name: Bamned
full_name: Sanitther, Bamned
last_name: Sanitther
- first_name: Zheng
full_name: Wang, Zheng
last_name: Wang
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
citation:
ama: Tröster T, Camberg AA, Sanitther B, Wang Z, Lauter C. Manufacturing and investigation
of steel-CFRP hybrid pillar structures for automotive applications by intrinsic
resin transfer moulding technology. International Journal of Automotive Composites.
2016;2:229-243. doi:10.1504/ijautoc.2016.10005304
apa: Tröster, T., Camberg, A. A., Sanitther, B., Wang, Z., & Lauter, C. (2016).
Manufacturing and investigation of steel-CFRP hybrid pillar structures for automotive
applications by intrinsic resin transfer moulding technology. International
Journal of Automotive Composites, 2, 229–243. https://doi.org/10.1504/ijautoc.2016.10005304
bibtex: '@article{Tröster_Camberg_Sanitther_Wang_Lauter_2016, title={Manufacturing
and investigation of steel-CFRP hybrid pillar structures for automotive applications
by intrinsic resin transfer moulding technology}, volume={2}, DOI={10.1504/ijautoc.2016.10005304},
journal={International Journal of Automotive Composites}, author={Tröster, Thomas
and Camberg, Alan Adam and Sanitther, Bamned and Wang, Zheng and Lauter, Christian},
year={2016}, pages={229–243} }'
chicago: 'Tröster, Thomas, Alan Adam Camberg, Bamned Sanitther, Zheng Wang, and
Christian Lauter. “Manufacturing and Investigation of Steel-CFRP Hybrid Pillar
Structures for Automotive Applications by Intrinsic Resin Transfer Moulding Technology.”
International Journal of Automotive Composites 2 (2016): 229–43. https://doi.org/10.1504/ijautoc.2016.10005304.'
ieee: 'T. Tröster, A. A. Camberg, B. Sanitther, Z. Wang, and C. Lauter, “Manufacturing
and investigation of steel-CFRP hybrid pillar structures for automotive applications
by intrinsic resin transfer moulding technology,” International Journal of
Automotive Composites, vol. 2, pp. 229–243, 2016, doi: 10.1504/ijautoc.2016.10005304.'
mla: Tröster, Thomas, et al. “Manufacturing and Investigation of Steel-CFRP Hybrid
Pillar Structures for Automotive Applications by Intrinsic Resin Transfer Moulding
Technology.” International Journal of Automotive Composites, vol. 2, 2016,
pp. 229–43, doi:10.1504/ijautoc.2016.10005304.
short: T. Tröster, A.A. Camberg, B. Sanitther, Z. Wang, C. Lauter, International
Journal of Automotive Composites 2 (2016) 229–243.
date_created: 2020-02-21T14:37:05Z
date_updated: 2025-06-06T07:43:40Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1504/ijautoc.2016.10005304
intvolume: ' 2'
language:
- iso: eng
page: 229-243
publication: International Journal of Automotive Composites
publication_identifier:
issn:
- 2051-8218
- 2051-8226
publication_status: published
quality_controlled: '1'
status: public
title: Manufacturing and investigation of steel-CFRP hybrid pillar structures for
automotive applications by intrinsic resin transfer moulding technology
type: journal_article
user_id: '15952'
volume: 2
year: '2016'
...
---
_id: '16137'
author:
- first_name: Christian
full_name: Lauter, Christian
last_name: Lauter
- first_name: Corin
full_name: Reuter, Corin
last_name: Reuter
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Lauter C, Reuter C, Wu S, Tröster T. Large-Scale Production of High-Performance
Fiber-Metal-Laminates by Prepreg-Press-Technology. International Journal of
Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering.
2016;10(5):875-880. doi:doi.org/10.5281/zenodo.1124481
apa: Lauter, C., Reuter, C., Wu, S., & Tröster, T. (2016). Large-Scale Production
of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology. International
Journal of Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering,
10(5), 875–880. https://doi.org/doi.org/10.5281/zenodo.1124481
bibtex: '@article{Lauter_Reuter_Wu_Tröster_2016, title={Large-Scale Production of
High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology}, volume={10},
DOI={doi.org/10.5281/zenodo.1124481},
number={5}, journal={International Journal of Mechanical, Aerospace, Industrial,
Mechatronic and Manufacturing Engineering}, publisher={World Academy of Science,
Engineering and Technology}, author={Lauter, Christian and Reuter, Corin and Wu,
Shuang and Tröster, Thomas}, year={2016}, pages={875–880} }'
chicago: 'Lauter, Christian, Corin Reuter, Shuang Wu, and Thomas Tröster. “Large-Scale
Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology.”
International Journal of Mechanical, Aerospace, Industrial, Mechatronic and
Manufacturing Engineering 10, no. 5 (2016): 875–80. https://doi.org/doi.org/10.5281/zenodo.1124481.'
ieee: 'C. Lauter, C. Reuter, S. Wu, and T. Tröster, “Large-Scale Production of High-Performance
Fiber-Metal-Laminates by Prepreg-Press-Technology,” International Journal of
Mechanical, Aerospace, Industrial, Mechatronic and Manufacturing Engineering,
vol. 10, no. 5, pp. 875–880, 2016, doi: doi.org/10.5281/zenodo.1124481.'
mla: Lauter, Christian, et al. “Large-Scale Production of High-Performance Fiber-Metal-Laminates
by Prepreg-Press-Technology.” International Journal of Mechanical, Aerospace,
Industrial, Mechatronic and Manufacturing Engineering, vol. 10, no. 5, World
Academy of Science, Engineering and Technology, 2016, pp. 875–80, doi:doi.org/10.5281/zenodo.1124481.
short: C. Lauter, C. Reuter, S. Wu, T. Tröster, International Journal of Mechanical,
Aerospace, Industrial, Mechatronic and Manufacturing Engineering 10 (2016) 875–880.
conference:
end_date: 2016-05-24
location: London
name: 18th International Conference on Advanced Mechanical Engineering and Spacecraft
Technologies
start_date: 2016-05-23
date_created: 2020-02-27T15:43:19Z
date_updated: 2025-06-06T07:45:32Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: doi.org/10.5281/zenodo.1124481
intvolume: ' 10'
issue: '5'
language:
- iso: eng
page: 875-880
publication: International Journal of Mechanical, Aerospace, Industrial, Mechatronic
and Manufacturing Engineering
publisher: World Academy of Science, Engineering and Technology
quality_controlled: '1'
status: public
title: Large-Scale Production of High-Performance Fiber-Metal-Laminates by Prepreg-Press-Technology
type: journal_article
user_id: '15952'
volume: 10
year: '2016'
...
---
_id: '24897'
abstract:
- lang: eng
text: "Den additiven Fertigungsverfahren wird ein hohes Potential zugesprochen,
die industrielle Fertigung von Bauteilen und Werkzeugen nachhaltig zu ändern.
Dies gilt auch für das hier betrachtete Laserstrahlschmelzen, bei dem metallische
Werkstoffe in Pulverform verarbeitet werden. Durch den schichtweisen Aufbau können
dabei enorme Vorteile gegenüber konventionellen Fertigungsverfahren erzielt werden,
was sich u. a. in einem bis dato unerreichten Maß an Geometriefreiheit widerspiegelt.\r\n\r\nAllerdings
werden die Werkstoffeigenschaften teils erheblich durch kurze und intensive Wechselwirkungen
zwischen Laser und Werkstoff bestimmt. Hierdurch können sich werkstoff-spezifische
Nachteile gegenüber konventionellen Fertigungsverfahren ergeben, die eine weitreichende
Etablierung des Laserstrahlschmelzens erschweren.\r\n\r\nVor diesem Hintergrund
zielt die vorliegende Dissertation auf eine Analyse und ggf. Optimierung der mikrostrukturellen
und mechanischen Eigenschaften laserstrahlgeschmolzener Werkstoffe. Der Schwerpunkt
liegt hierbei auf einer Ermüdungsbeanspruchung, da Einflüsse prozess-induzierter
Defektstrukturen unter dieser Beanspruchungsform besonders deutlich werden. Durch
umfangreiche Untersuchungen können dabei Prozessrouten aufgezeigt werden, die
für die betrachteten Werkstoffe TiAl6V4 und 316L den detektierten Schädigungsmechanismen
Rechnung tragen und somit zu einer technologischen Konkurrenzfähigkeit des Laserstrahlschmelzens
führen."
author:
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
citation:
ama: Leuders S. Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften
metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen. Vol 5. Düren
Verlag GmbH; 2016.
apa: Leuders, S. (2016). Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften
metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen (Vol. 5).
Düren Verlag GmbH.
bibtex: '@book{Leuders_2016, place={Düren}, series={Forschungsberichte des Direct
Manufacturing Research Centers}, title={Einfluss prozess-induzierter Defekte auf
die Ermüdungseigenschaften metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen},
volume={5}, publisher={Düren Verlag GmbH}, author={Leuders, Stefan}, year={2016},
collection={Forschungsberichte des Direct Manufacturing Research Centers} }'
chicago: 'Leuders, Stefan. Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften
metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen. Vol. 5.
Forschungsberichte des Direct Manufacturing Research Centers. Düren: Düren Verlag
GmbH, 2016.'
ieee: 'S. Leuders, Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften
metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen, vol. 5.
Düren: Düren Verlag GmbH, 2016.'
mla: Leuders, Stefan. Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften
metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen. Düren Verlag
GmbH, 2016.
short: S. Leuders, Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften
metallischer Werkstoffe verarbeitet mittels Laserstrahlschmelzen, Düren Verlag
GmbH, Düren, 2016.
date_created: 2021-09-23T09:19:37Z
date_updated: 2025-03-18T12:45:12Z
department:
- _id: '149'
- _id: '219'
- _id: '624'
- _id: '9'
- _id: '321'
intvolume: ' 5'
keyword:
- Additive Fertigung
- Laserstrahlschmelzen
- Materialermüdung
language:
- iso: ger
page: '168'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-4553-6
publication_status: published
publisher: Düren Verlag GmbH
related_material:
link:
- relation: confirmation
url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-4553-6&search=yes
series_title: Forschungsberichte des Direct Manufacturing Research Centers
status: public
supervisor:
- first_name: Thomas
full_name: Tröster, Thomas
last_name: Tröster
title: Einfluss prozess-induzierter Defekte auf die Ermüdungseigenschaften metallischer
Werkstoffe verarbeitet mittels Laserstrahlschmelzen
type: dissertation
user_id: '90491'
volume: 5
year: '2016'
...
---
_id: '52438'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: 'Schlüter A. Energy Efficiency in Industrial Areas: Examples, Chances and
Challenges. Talk. Export initiative of the German Federal Ministry of Economic
Affairs and Energy (BMWi); 2016.'
apa: 'Schlüter, A. (2016). Energy Efficiency in Industrial Areas: Examples, Chances
and Challenges. Talk. Export initiative of the German Federal Ministry of
Economic Affairs and Energy (BMWi).'
bibtex: '@book{Schlüter_2016, place={Detroit, USA}, title={Energy Efficiency in
Industrial Areas: Examples, Chances and Challenges. Talk}, publisher={Export initiative
of the German Federal Ministry of Economic Affairs and Energy (BMWi)}, author={Schlüter,
Alexander}, year={2016} }'
chicago: 'Schlüter, Alexander. Energy Efficiency in Industrial Areas: Examples,
Chances and Challenges. Talk. Detroit, USA: Export initiative of the German
Federal Ministry of Economic Affairs and Energy (BMWi), 2016.'
ieee: 'A. Schlüter, Energy Efficiency in Industrial Areas: Examples, Chances
and Challenges. Talk. Detroit, USA: Export initiative of the German Federal
Ministry of Economic Affairs and Energy (BMWi), 2016.'
mla: 'Schlüter, Alexander. Energy Efficiency in Industrial Areas: Examples, Chances
and Challenges. Talk. Export initiative of the German Federal Ministry of
Economic Affairs and Energy (BMWi), 2016.'
short: 'A. Schlüter, Energy Efficiency in Industrial Areas: Examples, Chances and
Challenges. Talk, Export initiative of the German Federal Ministry of Economic
Affairs and Energy (BMWi), Detroit, USA, 2016.'
date_created: 2024-03-10T08:22:50Z
date_updated: 2025-04-01T08:13:16Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: eng
place: Detroit, USA
publisher: Export initiative of the German Federal Ministry of Economic Affairs and
Energy (BMWi)
status: public
title: 'Energy Efficiency in Industrial Areas: Examples, Chances and Challenges. Talk'
type: misc
user_id: '22833'
year: '2016'
...
---
_id: '52208'
article_type: original
author:
- first_name: Diana
full_name: Khripko, Diana
last_name: Khripko
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Benjamin
full_name: Rommel, Benjamin
last_name: Rommel
- first_name: Michele
full_name: Rosano, Michele
last_name: Rosano
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
citation:
ama: 'Khripko D, Schlüter A, Rommel B, Rosano M, Hesselbach J. Energy demand and
efficiency measures in polymer processing: comparison between temperate and Mediterranean
operating plants. International Journal of Energy and Environmental Engineering.
2016;7(2):225-233. doi:10.1007/s40095-015-0200-2'
apa: 'Khripko, D., Schlüter, A., Rommel, B., Rosano, M., & Hesselbach, J. (2016).
Energy demand and efficiency measures in polymer processing: comparison between
temperate and Mediterranean operating plants. International Journal of Energy
and Environmental Engineering, 7(2), 225–233. https://doi.org/10.1007/s40095-015-0200-2'
bibtex: '@article{Khripko_Schlüter_Rommel_Rosano_Hesselbach_2016, title={Energy
demand and efficiency measures in polymer processing: comparison between temperate
and Mediterranean operating plants}, volume={7}, DOI={10.1007/s40095-015-0200-2},
number={2}, journal={International Journal of Energy and Environmental Engineering},
publisher={Springer Science and Business Media LLC}, author={Khripko, Diana and
Schlüter, Alexander and Rommel, Benjamin and Rosano, Michele and Hesselbach, Jens},
year={2016}, pages={225–233} }'
chicago: 'Khripko, Diana, Alexander Schlüter, Benjamin Rommel, Michele Rosano, and
Jens Hesselbach. “Energy Demand and Efficiency Measures in Polymer Processing:
Comparison between Temperate and Mediterranean Operating Plants.” International
Journal of Energy and Environmental Engineering 7, no. 2 (2016): 225–33. https://doi.org/10.1007/s40095-015-0200-2.'
ieee: 'D. Khripko, A. Schlüter, B. Rommel, M. Rosano, and J. Hesselbach, “Energy
demand and efficiency measures in polymer processing: comparison between temperate
and Mediterranean operating plants,” International Journal of Energy and Environmental
Engineering, vol. 7, no. 2, pp. 225–233, 2016, doi: 10.1007/s40095-015-0200-2.'
mla: 'Khripko, Diana, et al. “Energy Demand and Efficiency Measures in Polymer Processing:
Comparison between Temperate and Mediterranean Operating Plants.” International
Journal of Energy and Environmental Engineering, vol. 7, no. 2, Springer Science
and Business Media LLC, 2016, pp. 225–33, doi:10.1007/s40095-015-0200-2.'
short: D. Khripko, A. Schlüter, B. Rommel, M. Rosano, J. Hesselbach, International
Journal of Energy and Environmental Engineering 7 (2016) 225–233.
date_created: 2024-02-29T11:02:21Z
date_updated: 2025-04-01T08:40:14Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
doi: 10.1007/s40095-015-0200-2
intvolume: ' 7'
issue: '2'
keyword:
- Primary energy demand
- Energy efficiency within industry
- Polymer processing
language:
- iso: eng
main_file_link:
- url: "Primary energy demand \x02 Energy efficiency within industry \x02 Polymer
processing"
page: 225-233
publication: International Journal of Energy and Environmental Engineering
publication_identifier:
issn:
- 2008-9163
- 2251-6832
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
related_material:
link:
- relation: original
url: https://link.springer.com/article/10.1007/s40095-015-0200-2
status: public
title: 'Energy demand and efficiency measures in polymer processing: comparison between
temperate and Mediterranean operating plants'
type: journal_article
user_id: '22833'
volume: 7
year: '2016'
...