---
_id: '23651'
author:
- first_name: Philipp
full_name: Scholle, Philipp
last_name: Scholle
- first_name: Young-Woo
full_name: Song, Young-Woo
last_name: Song
- first_name: Michael
full_name: Herzog, Michael
last_name: Herzog
- first_name: Beate
full_name: Bender, Beate
last_name: Bender
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
citation:
ama: 'Scholle P, Song Y-W, Herzog M, Bender B, Gräßler I. Methoden der Anforderungsstrukturierung
zur Steuerung von Produktentwicklungsprozessen. In: Krause D, Paetzold K, Wartzack
S, eds. Design for X - Beiträge zum 26. DfX-Symposium. TuTech Innovation
GmbH; 2015:121-132.'
apa: Scholle, P., Song, Y.-W., Herzog, M., Bender, B., & Gräßler, I. (2015).
Methoden der Anforderungsstrukturierung zur Steuerung von Produktentwicklungsprozessen.
In D. Krause, K. Paetzold, & S. Wartzack (Eds.), Design for X - Beiträge
zum 26. DfX-Symposium (pp. 121–132). TuTech Innovation GmbH.
bibtex: '@inproceedings{Scholle_Song_Herzog_Bender_Gräßler_2015, title={Methoden
der Anforderungsstrukturierung zur Steuerung von Produktentwicklungsprozessen},
booktitle={Design for X - Beiträge zum 26. DfX-Symposium}, publisher={TuTech Innovation
GmbH}, author={Scholle, Philipp and Song, Young-Woo and Herzog, Michael and Bender,
Beate and Gräßler, Iris}, editor={Krause, Dieter and Paetzold, Kristin and Wartzack,
SandroEditors}, year={2015}, pages={121–132} }'
chicago: Scholle, Philipp, Young-Woo Song, Michael Herzog, Beate Bender, and Iris
Gräßler. “Methoden der Anforderungsstrukturierung zur Steuerung von Produktentwicklungsprozessen.”
In Design for X - Beiträge zum 26. DfX-Symposium, edited by Dieter Krause,
Kristin Paetzold, and Sandro Wartzack, 121–32. TuTech Innovation GmbH, 2015.
ieee: P. Scholle, Y.-W. Song, M. Herzog, B. Bender, and I. Gräßler, “Methoden der
Anforderungsstrukturierung zur Steuerung von Produktentwicklungsprozessen,” in
Design for X - Beiträge zum 26. DfX-Symposium, 2015, pp. 121–132.
mla: Scholle, Philipp, et al. “Methoden der Anforderungsstrukturierung zur Steuerung
von Produktentwicklungsprozessen.” Design for X - Beiträge zum 26. DfX-Symposium,
edited by Dieter Krause et al., TuTech Innovation GmbH, 2015, pp. 121–32.
short: 'P. Scholle, Y.-W. Song, M. Herzog, B. Bender, I. Gräßler, in: D. Krause,
K. Paetzold, S. Wartzack (Eds.), Design for X - Beiträge zum 26. DfX-Symposium,
TuTech Innovation GmbH, 2015, pp. 121–132.'
date_created: 2021-09-01T11:25:59Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
editor:
- first_name: Dieter
full_name: Krause, Dieter
last_name: Krause
- first_name: Kristin
full_name: Paetzold, Kristin
last_name: Paetzold
- first_name: Sandro
full_name: Wartzack, Sandro
last_name: Wartzack
language:
- iso: ger
page: 121-132
publication: Design for X - Beiträge zum 26. DfX-Symposium
publication_identifier:
isbn:
- 978-3-941492-93-6
publisher: TuTech Innovation GmbH
status: public
title: Methoden der Anforderungsstrukturierung zur Steuerung von Produktentwicklungsprozessen
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23652'
author:
- first_name: Julian
full_name: Hentze, Julian
id: '13342'
last_name: Hentze
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
citation:
ama: 'Hentze J, Gräßler I. Lebenszyklusgerechte Umfeldmodellierung. In: Krause D,
Paetzold K, Wartzack S, eds. Design for X - Beiträge zum 26. DfX-Symposium.
TuTech Innovation GmbH; 2015:245-254.'
apa: Hentze, J., & Gräßler, I. (2015). Lebenszyklusgerechte Umfeldmodellierung.
In D. Krause, K. Paetzold, & S. Wartzack (Eds.), Design for X - Beiträge
zum 26. DfX-Symposium (pp. 245–254). TuTech Innovation GmbH.
bibtex: '@inproceedings{Hentze_Gräßler_2015, title={Lebenszyklusgerechte Umfeldmodellierung},
booktitle={Design for X - Beiträge zum 26. DfX-Symposium}, publisher={TuTech Innovation
GmbH}, author={Hentze, Julian and Gräßler, Iris}, editor={Krause, Dieter and Paetzold,
Kristin and Wartzack, SandroEditors}, year={2015}, pages={245–254} }'
chicago: Hentze, Julian, and Iris Gräßler. “Lebenszyklusgerechte Umfeldmodellierung.”
In Design for X - Beiträge zum 26. DfX-Symposium, edited by Dieter Krause,
Kristin Paetzold, and Sandro Wartzack, 245–54. TuTech Innovation GmbH, 2015.
ieee: J. Hentze and I. Gräßler, “Lebenszyklusgerechte Umfeldmodellierung,” in Design
for X - Beiträge zum 26. DfX-Symposium, 2015, pp. 245–254.
mla: Hentze, Julian, and Iris Gräßler. “Lebenszyklusgerechte Umfeldmodellierung.”
Design for X - Beiträge zum 26. DfX-Symposium, edited by Dieter Krause
et al., TuTech Innovation GmbH, 2015, pp. 245–54.
short: 'J. Hentze, I. Gräßler, in: D. Krause, K. Paetzold, S. Wartzack (Eds.), Design
for X - Beiträge zum 26. DfX-Symposium, TuTech Innovation GmbH, 2015, pp. 245–254.'
date_created: 2021-09-01T11:29:25Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
editor:
- first_name: Dieter
full_name: Krause, Dieter
last_name: Krause
- first_name: Kristin
full_name: Paetzold, Kristin
last_name: Paetzold
- first_name: Sandro
full_name: Wartzack, Sandro
last_name: Wartzack
language:
- iso: ger
page: 245-254
publication: Design for X - Beiträge zum 26. DfX-Symposium
publication_identifier:
isbn:
- 978-3-941492-93-6
publisher: TuTech Innovation GmbH
status: public
title: Lebenszyklusgerechte Umfeldmodellierung
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23653'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Patrick
full_name: Taplick, Patrick
last_name: Taplick
citation:
ama: 'Gräßler I, Taplick P. Interconnection of a System- and Process-Based Matrix
for Virtual Engineering on the Basis of the Product Life Cycle. In: Padoano E,
Villmer F-J, eds. 5th International Conference Production Engineering and Management.
Ostwestfalen-Lippe University of Applied Sciences; 2015:43-53.'
apa: Gräßler, I., & Taplick, P. (2015). Interconnection of a System- and Process-Based
Matrix for Virtual Engineering on the Basis of the Product Life Cycle. In E. Padoano
& F.-J. Villmer (Eds.), 5th International Conference Production Engineering
and Management (pp. 43–53). Ostwestfalen-Lippe University of Applied Sciences.
bibtex: '@inproceedings{Gräßler_Taplick_2015, title={Interconnection of a System-
and Process-Based Matrix for Virtual Engineering on the Basis of the Product Life
Cycle}, booktitle={5th International Conference Production Engineering and Management},
publisher={Ostwestfalen-Lippe University of Applied Sciences}, author={Gräßler,
Iris and Taplick, Patrick}, editor={Padoano, Elio and Villmer, Franz-JosefEditors},
year={2015}, pages={43–53} }'
chicago: Gräßler, Iris, and Patrick Taplick. “Interconnection of a System- and Process-Based
Matrix for Virtual Engineering on the Basis of the Product Life Cycle.” In 5th
International Conference Production Engineering and Management, edited by
Elio Padoano and Franz-Josef Villmer, 43–53. Ostwestfalen-Lippe University of
Applied Sciences, 2015.
ieee: I. Gräßler and P. Taplick, “Interconnection of a System- and Process-Based
Matrix for Virtual Engineering on the Basis of the Product Life Cycle,” in 5th
International Conference Production Engineering and Management, 2015, pp.
43–53.
mla: Gräßler, Iris, and Patrick Taplick. “Interconnection of a System- and Process-Based
Matrix for Virtual Engineering on the Basis of the Product Life Cycle.” 5th
International Conference Production Engineering and Management, edited by
Elio Padoano and Franz-Josef Villmer, Ostwestfalen-Lippe University of Applied
Sciences, 2015, pp. 43–53.
short: 'I. Gräßler, P. Taplick, in: E. Padoano, F.-J. Villmer (Eds.), 5th International
Conference Production Engineering and Management, Ostwestfalen-Lippe University
of Applied Sciences, 2015, pp. 43–53.'
date_created: 2021-09-01T11:42:00Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
language:
- iso: eng
page: 43-53
publication: 5th International Conference Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publisher: Ostwestfalen-Lippe University of Applied Sciences
status: public
title: Interconnection of a System- and Process-Based Matrix for Virtual Engineering
on the Basis of the Product Life Cycle
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23654'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Alexander
full_name: Pöhler, Alexander
last_name: Pöhler
- first_name: Philipp
full_name: Scholle, Philipp
last_name: Scholle
citation:
ama: 'Gräßler I, Pöhler A, Scholle P. CPPS - Based Market Access Opportunities for
Production Capacity Providers. In: Padoano E, Villmer F-J, eds. 5th International
Conference Production Engineering and Management. Ostwestfalen-Lippe University
of Applied Sciences; 2015:67-77.'
apa: Gräßler, I., Pöhler, A., & Scholle, P. (2015). CPPS - Based Market Access
Opportunities for Production Capacity Providers. In E. Padoano & F.-J. Villmer
(Eds.), 5th International Conference Production Engineering and Management
(pp. 67–77). Ostwestfalen-Lippe University of Applied Sciences.
bibtex: '@inproceedings{Gräßler_Pöhler_Scholle_2015, title={CPPS - Based Market
Access Opportunities for Production Capacity Providers}, booktitle={5th International
Conference Production Engineering and Management}, publisher={Ostwestfalen-Lippe
University of Applied Sciences}, author={Gräßler, Iris and Pöhler, Alexander and
Scholle, Philipp}, editor={Padoano, Elio and Villmer, Franz-JosefEditors}, year={2015},
pages={67–77} }'
chicago: Gräßler, Iris, Alexander Pöhler, and Philipp Scholle. “CPPS - Based Market
Access Opportunities for Production Capacity Providers.” In 5th International
Conference Production Engineering and Management, edited by Elio Padoano and
Franz-Josef Villmer, 67–77. Ostwestfalen-Lippe University of Applied Sciences,
2015.
ieee: I. Gräßler, A. Pöhler, and P. Scholle, “CPPS - Based Market Access Opportunities
for Production Capacity Providers,” in 5th International Conference Production
Engineering and Management, 2015, pp. 67–77.
mla: Gräßler, Iris, et al. “CPPS - Based Market Access Opportunities for Production
Capacity Providers.” 5th International Conference Production Engineering and
Management, edited by Elio Padoano and Franz-Josef Villmer, Ostwestfalen-Lippe
University of Applied Sciences, 2015, pp. 67–77.
short: 'I. Gräßler, A. Pöhler, P. Scholle, in: E. Padoano, F.-J. Villmer (Eds.),
5th International Conference Production Engineering and Management, Ostwestfalen-Lippe
University of Applied Sciences, 2015, pp. 67–77.'
date_created: 2021-09-01T12:06:23Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
editor:
- first_name: Elio
full_name: Padoano, Elio
last_name: Padoano
- first_name: Franz-Josef
full_name: Villmer, Franz-Josef
last_name: Villmer
language:
- iso: eng
page: 67-77
publication: 5th International Conference Production Engineering and Management
publication_identifier:
isbn:
- 978-3-941645-11-0
publisher: Ostwestfalen-Lippe University of Applied Sciences
status: public
title: CPPS - Based Market Access Opportunities for Production Capacity Providers
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23655'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Julian
full_name: Hentze, Julian
id: '13342'
last_name: Hentze
citation:
ama: 'Gräßler I, Hentze J. Enriching Mechatronic V-Model by Aspects of Systems
Engineering. In: Proceedings of the 7th ECCOMAS Thematic Conference on Smart
Structures and Materials, SMART2015. IDMEC/IST, Ponta-Delgada, Azores, Portugal;
2015.'
apa: Gräßler, I., & Hentze, J. (2015). Enriching Mechatronic V-Model by Aspects
of Systems Engineering. In Proceedings of the 7th ECCOMAS Thematic Conference
on Smart Structures and Materials, SMART2015. IDMEC/IST, Ponta-Delgada, Azores,
Portugal.
bibtex: '@inproceedings{Gräßler_Hentze_2015, title={ Enriching Mechatronic V-Model
by Aspects of Systems Engineering}, booktitle={Proceedings of the 7th ECCOMAS
Thematic Conference on Smart Structures and Materials, SMART2015}, publisher={
IDMEC/IST, Ponta-Delgada, Azores, Portugal}, author={Gräßler, Iris and Hentze,
Julian}, year={2015} }'
chicago: Gräßler, Iris, and Julian Hentze. “ Enriching Mechatronic V-Model by Aspects
of Systems Engineering.” In Proceedings of the 7th ECCOMAS Thematic Conference
on Smart Structures and Materials, SMART2015. IDMEC/IST, Ponta-Delgada, Azores,
Portugal, 2015.
ieee: I. Gräßler and J. Hentze, “ Enriching Mechatronic V-Model by Aspects of Systems
Engineering,” in Proceedings of the 7th ECCOMAS Thematic Conference on Smart
Structures and Materials, SMART2015, 2015.
mla: Gräßler, Iris, and Julian Hentze. “ Enriching Mechatronic V-Model by Aspects
of Systems Engineering.” Proceedings of the 7th ECCOMAS Thematic Conference
on Smart Structures and Materials, SMART2015, IDMEC/IST, Ponta-Delgada, Azores,
Portugal, 2015.
short: 'I. Gräßler, J. Hentze, in: Proceedings of the 7th ECCOMAS Thematic Conference
on Smart Structures and Materials, SMART2015, IDMEC/IST, Ponta-Delgada, Azores,
Portugal, 2015.'
date_created: 2021-09-01T12:14:43Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: eng
publication: Proceedings of the 7th ECCOMAS Thematic Conference on Smart Structures
and Materials, SMART2015
publication_identifier:
isbn:
- 978-989-96276-8-0
publisher: ' IDMEC/IST, Ponta-Delgada, Azores, Portugal'
status: public
title: ' Enriching Mechatronic V-Model by Aspects of Systems Engineering'
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23656'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Julian
full_name: Hentze, Julian
id: '13342'
last_name: Hentze
citation:
ama: 'Gräßler I, Hentze J. A V-model based comparison of Systems Engineering approaches.
In: Proceedings of the 22nd European Concurrent Engineering Conference.
Lisbon, Portugal: EUROSIS-ETI; 2015:80-86.'
apa: 'Gräßler, I., & Hentze, J. (2015). A V-model based comparison of Systems
Engineering approaches. In Proceedings of the 22nd European Concurrent Engineering
Conference (pp. 80–86). Lisbon, Portugal: EUROSIS-ETI.'
bibtex: '@inproceedings{Gräßler_Hentze_2015, place={Lisbon, Portugal}, title={A
V-model based comparison of Systems Engineering approaches}, booktitle={Proceedings
of the 22nd European Concurrent Engineering Conference}, publisher={EUROSIS-ETI},
author={Gräßler, Iris and Hentze, Julian}, year={2015}, pages={80–86} }'
chicago: 'Gräßler, Iris, and Julian Hentze. “A V-Model Based Comparison of Systems
Engineering Approaches.” In Proceedings of the 22nd European Concurrent Engineering
Conference, 80–86. Lisbon, Portugal: EUROSIS-ETI, 2015.'
ieee: I. Gräßler and J. Hentze, “A V-model based comparison of Systems Engineering
approaches,” in Proceedings of the 22nd European Concurrent Engineering Conference,
2015, pp. 80–86.
mla: Gräßler, Iris, and Julian Hentze. “A V-Model Based Comparison of Systems Engineering
Approaches.” Proceedings of the 22nd European Concurrent Engineering Conference,
EUROSIS-ETI, 2015, pp. 80–86.
short: 'I. Gräßler, J. Hentze, in: Proceedings of the 22nd European Concurrent Engineering
Conference, EUROSIS-ETI, Lisbon, Portugal, 2015, pp. 80–86.'
date_created: 2021-09-01T12:30:31Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: eng
page: 80-86
place: Lisbon, Portugal
publication: Proceedings of the 22nd European Concurrent Engineering Conference
publication_identifier:
isbn:
- 978-90-77381-88-5
publisher: EUROSIS-ETI
status: public
title: A V-model based comparison of Systems Engineering approaches
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23657'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Patrick
full_name: Taplick, Patrick
last_name: Taplick
citation:
ama: 'Gräßler I, Taplick P. Supporting Product Engineering by Technologies of Virtual
and Augmented Reality. In: Proceedings of the 21st European Concurrent Engineering
Conference. Lisbon, Portugal: EUROSIS-ETI; 2015:73-79.'
apa: 'Gräßler, I., & Taplick, P. (2015). Supporting Product Engineering by Technologies
of Virtual and Augmented Reality. In Proceedings of the 21st European Concurrent
Engineering Conference (pp. 73–79). Lisbon, Portugal: EUROSIS-ETI.'
bibtex: '@inproceedings{Gräßler_Taplick_2015, place={Lisbon, Portugal}, title={Supporting
Product Engineering by Technologies of Virtual and Augmented Reality}, booktitle={Proceedings
of the 21st European Concurrent Engineering Conference}, publisher={EUROSIS-ETI},
author={Gräßler, Iris and Taplick, Patrick}, year={2015}, pages={73–79} }'
chicago: 'Gräßler, Iris, and Patrick Taplick. “Supporting Product Engineering by
Technologies of Virtual and Augmented Reality.” In Proceedings of the 21st
European Concurrent Engineering Conference, 73–79. Lisbon, Portugal: EUROSIS-ETI,
2015.'
ieee: I. Gräßler and P. Taplick, “Supporting Product Engineering by Technologies
of Virtual and Augmented Reality,” in Proceedings of the 21st European Concurrent
Engineering Conference, 2015, pp. 73–79.
mla: Gräßler, Iris, and Patrick Taplick. “Supporting Product Engineering by Technologies
of Virtual and Augmented Reality.” Proceedings of the 21st European Concurrent
Engineering Conference, EUROSIS-ETI, 2015, pp. 73–79.
short: 'I. Gräßler, P. Taplick, in: Proceedings of the 21st European Concurrent
Engineering Conference, EUROSIS-ETI, Lisbon, Portugal, 2015, pp. 73–79.'
date_created: 2021-09-01T12:40:27Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: eng
page: 73-79
place: Lisbon, Portugal
publication: Proceedings of the 21st European Concurrent Engineering Conference
publication_identifier:
isbn:
- 978-90-77381-88-5
publisher: EUROSIS-ETI
status: public
title: Supporting Product Engineering by Technologies of Virtual and Augmented Reality
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23665'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
citation:
ama: 'Gräßler I. Umsetzungsorientierte Synthese mechatronischer Referenzmodelle.
In: VDI Mechatronik 2015, TU Dortmund, 12.-13. März 2015. ; 2015:167-172.'
apa: Gräßler, I. (2015). Umsetzungsorientierte Synthese mechatronischer Referenzmodelle.
In VDI Mechatronik 2015, TU Dortmund, 12.-13. März 2015 (pp. 167–172).
bibtex: '@inproceedings{Gräßler_2015, title={Umsetzungsorientierte Synthese mechatronischer
Referenzmodelle}, booktitle={ VDI Mechatronik 2015, TU Dortmund, 12.-13. März
2015}, author={Gräßler, Iris}, year={2015}, pages={167–172} }'
chicago: Gräßler, Iris. “Umsetzungsorientierte Synthese mechatronischer Referenzmodelle.”
In VDI Mechatronik 2015, TU Dortmund, 12.-13. März 2015, 167–72, 2015.
ieee: I. Gräßler, “Umsetzungsorientierte Synthese mechatronischer Referenzmodelle,”
in VDI Mechatronik 2015, TU Dortmund, 12.-13. März 2015, 2015, pp. 167–172.
mla: Gräßler, Iris. “Umsetzungsorientierte Synthese mechatronischer Referenzmodelle.”
VDI Mechatronik 2015, TU Dortmund, 12.-13. März 2015, 2015, pp. 167–72.
short: 'I. Gräßler, in: VDI Mechatronik 2015, TU Dortmund, 12.-13. März 2015, 2015,
pp. 167–172.'
date_created: 2021-09-02T07:35:08Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: ger
page: 167-172
publication: ' VDI Mechatronik 2015, TU Dortmund, 12.-13. März 2015'
status: public
title: Umsetzungsorientierte Synthese mechatronischer Referenzmodelle
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23666'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
citation:
ama: 'Gräßler I. Generic Product Creation System. In: 13th Industrial Simulation
Conference 2015, Valencia, Spain, June 1-3. ; 2015:173-177.'
apa: Gräßler, I. (2015). Generic Product Creation System. In 13th Industrial
Simulation Conference 2015, Valencia, Spain, June 1-3 (pp. 173–177).
bibtex: '@inproceedings{Gräßler_2015, title={Generic Product Creation System}, booktitle={13th
Industrial Simulation Conference 2015, Valencia, Spain, June 1-3}, author={Gräßler,
Iris}, year={2015}, pages={173–177} }'
chicago: Gräßler, Iris. “Generic Product Creation System.” In 13th Industrial
Simulation Conference 2015, Valencia, Spain, June 1-3, 173–77, 2015.
ieee: I. Gräßler, “Generic Product Creation System,” in 13th Industrial Simulation
Conference 2015, Valencia, Spain, June 1-3, 2015, pp. 173–177.
mla: Gräßler, Iris. “Generic Product Creation System.” 13th Industrial Simulation
Conference 2015, Valencia, Spain, June 1-3, 2015, pp. 173–77.
short: 'I. Gräßler, in: 13th Industrial Simulation Conference 2015, Valencia, Spain,
June 1-3, 2015, pp. 173–177.'
date_created: 2021-09-02T07:40:55Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: eng
page: 173-177
publication: 13th Industrial Simulation Conference 2015, Valencia, Spain, June 1-3
status: public
title: Generic Product Creation System
type: conference
user_id: '21240'
year: '2015'
...
---
_id: '23833'
author:
- first_name: Nicole
full_name: Hüser, Nicole
id: '22006'
last_name: Hüser
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Hüser N, Kenig E. A Comparative Study of Carbon Capture for Different Power
Plants. Chemical Engineering Transactions. 2015;45:1783-1788. doi:10.3303/CET1545298
apa: Hüser, N., & Kenig, E. (2015). A Comparative Study of Carbon Capture for
Different Power Plants. Chemical Engineering Transactions, 45, 1783–1788.
https://doi.org/10.3303/CET1545298
bibtex: '@article{Hüser_Kenig_2015, title={A Comparative Study of Carbon Capture
for Different Power Plants}, volume={45}, DOI={10.3303/CET1545298},
journal={Chemical Engineering Transactions}, author={Hüser, Nicole and Kenig,
Eugeny}, year={2015}, pages={1783–1788} }'
chicago: 'Hüser, Nicole, and Eugeny Kenig. “A Comparative Study of Carbon Capture
for Different Power Plants.” Chemical Engineering Transactions 45 (2015):
1783–88. https://doi.org/10.3303/CET1545298.'
ieee: N. Hüser and E. Kenig, “A Comparative Study of Carbon Capture for Different
Power Plants,” Chemical Engineering Transactions, vol. 45, pp. 1783–1788,
2015.
mla: Hüser, Nicole, and Eugeny Kenig. “A Comparative Study of Carbon Capture for
Different Power Plants.” Chemical Engineering Transactions, vol. 45, 2015,
pp. 1783–88, doi:10.3303/CET1545298.
short: N. Hüser, E. Kenig, Chemical Engineering Transactions 45 (2015) 1783–1788.
date_created: 2021-09-07T08:45:22Z
date_updated: 2022-01-06T06:56:01Z
department:
- _id: '9'
- _id: '145'
doi: 10.3303/CET1545298
intvolume: ' 45'
language:
- iso: eng
page: 1783-1788
publication: Chemical Engineering Transactions
status: public
title: A Comparative Study of Carbon Capture for Different Power Plants
type: journal_article
user_id: '22006'
volume: 45
year: '2015'
...
---
_id: '23965'
author:
- first_name: M.
full_name: Piper, M.
last_name: Piper
- first_name: A.
full_name: Zibart, A.
last_name: Zibart
- first_name: J.M.
full_name: Tran, J.M.
last_name: Tran
- first_name: E.Y.
full_name: Kenig, E.Y.
last_name: Kenig
citation:
ama: Piper M, Zibart A, Tran JM, Kenig EY. Numerical investigation of turbulent
forced convection heat transfer in pillow plates. International Journal of
Heat and Mass Transfer. 2015:516-527. doi:10.1016/j.ijheatmasstransfer.2015.11.014
apa: Piper, M., Zibart, A., Tran, J. M., & Kenig, E. Y. (2015). Numerical investigation
of turbulent forced convection heat transfer in pillow plates. International
Journal of Heat and Mass Transfer, 516–527. https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.014
bibtex: '@article{Piper_Zibart_Tran_Kenig_2015, title={Numerical investigation of
turbulent forced convection heat transfer in pillow plates}, DOI={10.1016/j.ijheatmasstransfer.2015.11.014},
journal={International Journal of Heat and Mass Transfer}, author={Piper, M. and
Zibart, A. and Tran, J.M. and Kenig, E.Y.}, year={2015}, pages={516–527} }'
chicago: Piper, M., A. Zibart, J.M. Tran, and E.Y. Kenig. “Numerical Investigation
of Turbulent Forced Convection Heat Transfer in Pillow Plates.” International
Journal of Heat and Mass Transfer, 2015, 516–27. https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.014.
ieee: M. Piper, A. Zibart, J. M. Tran, and E. Y. Kenig, “Numerical investigation
of turbulent forced convection heat transfer in pillow plates,” International
Journal of Heat and Mass Transfer, pp. 516–527, 2015.
mla: Piper, M., et al. “Numerical Investigation of Turbulent Forced Convection Heat
Transfer in Pillow Plates.” International Journal of Heat and Mass Transfer,
2015, pp. 516–27, doi:10.1016/j.ijheatmasstransfer.2015.11.014.
short: M. Piper, A. Zibart, J.M. Tran, E.Y. Kenig, International Journal of Heat
and Mass Transfer (2015) 516–527.
date_created: 2021-09-08T10:40:47Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '145'
doi: 10.1016/j.ijheatmasstransfer.2015.11.014
language:
- iso: eng
page: 516-527
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: International Journal of Heat and Mass Transfer
publication_identifier:
issn:
- 0017-9310
publication_status: published
status: public
title: Numerical investigation of turbulent forced convection heat transfer in pillow
plates
type: journal_article
user_id: '11029'
year: '2015'
...
---
_id: '23974'
author:
- first_name: Alexander
full_name: Zibart, Alexander
id: '11029'
last_name: Zibart
- first_name: Rositsa
full_name: Cherkezova, Rositsa
last_name: Cherkezova
- first_name: 'Heiko '
full_name: 'Figge, Heiko '
last_name: Figge
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Zibart A, Cherkezova R, Figge H, Kenig E. Optimierung der Kühlung eines On-Board-Ladegeräts
für elektrisch betriebene Kraftfahrzeuge mithilfe der CFD-Methoden. In: ; 2015.
doi:10.1002/cite.201550048'
apa: Zibart, A., Cherkezova, R., Figge, H., & Kenig, E. (2015). Optimierung
der Kühlung eines On-Board-Ladegeräts für elektrisch betriebene Kraftfahrzeuge
mithilfe der CFD-Methoden. Presented at the Jahrestreffen der ProcessNet-Fachgemeinschaft
Fluiddynamik und Trenntechnik, Bamberg. https://doi.org/10.1002/cite.201550048
bibtex: '@inproceedings{Zibart_Cherkezova_Figge_Kenig_2015, title={Optimierung der
Kühlung eines On-Board-Ladegeräts für elektrisch betriebene Kraftfahrzeuge mithilfe
der CFD-Methoden}, DOI={10.1002/cite.201550048},
author={Zibart, Alexander and Cherkezova, Rositsa and Figge, Heiko and Kenig,
Eugeny}, year={2015} }'
chicago: Zibart, Alexander, Rositsa Cherkezova, Heiko Figge, and Eugeny Kenig.
“Optimierung Der Kühlung Eines On-Board-Ladegeräts Für Elektrisch Betriebene Kraftfahrzeuge
Mithilfe Der CFD-Methoden,” 2015. https://doi.org/10.1002/cite.201550048.
ieee: A. Zibart, R. Cherkezova, H. Figge, and E. Kenig, “Optimierung der Kühlung
eines On-Board-Ladegeräts für elektrisch betriebene Kraftfahrzeuge mithilfe der
CFD-Methoden,” presented at the Jahrestreffen der ProcessNet-Fachgemeinschaft
Fluiddynamik und Trenntechnik, Bamberg, 2015.
mla: Zibart, Alexander, et al. Optimierung Der Kühlung Eines On-Board-Ladegeräts
Für Elektrisch Betriebene Kraftfahrzeuge Mithilfe Der CFD-Methoden. 2015,
doi:10.1002/cite.201550048.
short: 'A. Zibart, R. Cherkezova, H. Figge, E. Kenig, in: 2015.'
conference:
location: Bamberg
name: Jahrestreffen der ProcessNet-Fachgemeinschaft Fluiddynamik und Trenntechnik
date_created: 2021-09-08T11:15:32Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '9'
- _id: '145'
doi: 10.1002/cite.201550048
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Optimierung der Kühlung eines On-Board-Ladegeräts für elektrisch betriebene
Kraftfahrzeuge mithilfe der CFD-Methoden
type: conference_abstract
user_id: '11029'
year: '2015'
...
---
_id: '22108'
author:
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
citation:
ama: 'Reschetnik W, Riemer A, Richard HA. Einsatz additiver Fertigung zur Optimierung
des Ermüdungsverhaltens von gekerbten Strukturen. In: DVM - Tagung - Additiv
Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und
-Prüfung e.V. ; 2015:63-72.'
apa: Reschetnik, W., Riemer, A., & Richard, H. A. (2015). Einsatz additiver
Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen. In
DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband
für Materialforschung und -prüfung e.V. (pp. 63–72).
bibtex: '@inproceedings{Reschetnik_Riemer_Richard_2015, title={Einsatz additiver
Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen}, booktitle={DVM
- Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung
und -prüfung e.V.}, author={Reschetnik, W. and Riemer, A. and Richard, H.A.},
year={2015}, pages={63–72} }'
chicago: Reschetnik, W., A. Riemer, and H.A. Richard. “Einsatz Additiver Fertigung
Zur Optimierung Des Ermüdungsverhaltens von Gekerbten Strukturen.” In DVM -
Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung
Und -Prüfung e.V., 63–72, 2015.
ieee: W. Reschetnik, A. Riemer, and H. A. Richard, “Einsatz additiver Fertigung
zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen,” in DVM -
Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung
und -prüfung e.V., 2015, pp. 63–72.
mla: Reschetnik, W., et al. “Einsatz Additiver Fertigung Zur Optimierung Des Ermüdungsverhaltens
von Gekerbten Strukturen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen,
Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.
short: 'W. Reschetnik, A. Riemer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte
Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung
e.V., 2015, pp. 63–72.'
date_created: 2021-05-11T07:47:52Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
page: 63-72
publication: DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher
Verband für Materialforschung und -prüfung e.V.
status: public
title: Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten
Strukturen
type: conference
user_id: '60486'
year: '2015'
...
---
_id: '22178'
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Z.
full_name: Li, Z.
last_name: Li
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Li Z, Schmid H-J. Mass finishing of laser sintered parts. In: 26th
Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:514-526.
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf'
apa: Delfs, P., Li, Z., & Schmid, H.-J. (2015). Mass finishing of laser sintered
parts. In 26th Annual International Solid Freeform Fabrication Symposium
(Vol. 26, pp. 514–526). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
bibtex: '@inproceedings{Delfs_Li_Schmid_2015, title={Mass finishing of laser sintered
parts}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Li, Z. and Schmid, Hans-Joachim}, year={2015}, pages={514–526} }'
chicago: Delfs, Patrick, Z. Li, and Hans-Joachim Schmid. “Mass Finishing of Laser
Sintered Parts.” In 26th Annual International Solid Freeform Fabrication Symposium,
26:514–26, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
ieee: P. Delfs, Z. Li, and H.-J. Schmid, “Mass finishing of laser sintered parts,”
in 26th Annual International Solid Freeform Fabrication Symposium, 2015,
vol. 26, pp. 514–526.
mla: Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.” 26th Annual
International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26,
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
short: 'P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform
Fabrication Symposium, 2015, pp. 514–526.'
date_created: 2021-05-14T07:46:07Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
intvolume: ' 26'
language:
- iso: eng
page: 514-526
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Mass finishing of laser sintered parts
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22179'
abstract:
- lang: eng
text: The temperature distribution and history within laser sintered part cakes
is an important aspect regarding the process quality and reproducibility of the
polymer laser sintering process. Especially the temperature history during the
build and cooling phase is decisive for powder ageing effects and the development
of part quality characteristics. In this work, a measurement system for three-dimensional
in-process temperature measurements is set up and the influence of different parameters
on the inner part cake temperature distribution and history is analyzed. Important
factors are not only geometrical build job parameters like the part packing density
and build height, but also process parameters like the layer thickness and bulk
powder density. Individual in-process temperature profiles at different positions
within a part cake are finally correlated with powder ageing effects. The results
of this work help to understand the temperature history dependency of powder and
part properties and can therefore be used to develop optimized process controls.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Schmid H-J. Temperature History within Laser Sintered Part Cakes
and its Influence on Process Quality. In: 26th Annual International Solid Freeform
Fabrication Symposium. Vol 26. ; 2015:190-199. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf'
apa: Josupeit, S., & Schmid, H.-J. (2015). Temperature History within Laser
Sintered Part Cakes and its Influence on Process Quality. In 26th Annual International
Solid Freeform Fabrication Symposium (Vol. 26, pp. 190–199). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Schmid_2015, title={Temperature History within
Laser Sintered Part Cakes and its Influence on Process Quality}, volume={26},
DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit,
Stefan and Schmid, Hans-Joachim}, year={2015}, pages={190–199} }'
chicago: Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within
Laser Sintered Part Cakes and Its Influence on Process Quality.” In 26th Annual
International Solid Freeform Fabrication Symposium, 26:190–99, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
ieee: S. Josupeit and H.-J. Schmid, “Temperature History within Laser Sintered Part
Cakes and its Influence on Process Quality,” in 26th Annual International Solid
Freeform Fabrication Symposium, 2015, vol. 26, pp. 190–199.
mla: Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser
Sintered Part Cakes and Its Influence on Process Quality.” 26th Annual International
Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
short: 'S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform
Fabrication Symposium, 2015, pp. 190–199.'
date_created: 2021-05-14T07:46:09Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
intvolume: ' 26'
language:
- iso: eng
page: 190-199
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Temperature History within Laser Sintered Part Cakes and its Influence on Process
Quality
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22187'
abstract:
- lang: eng
text: Due to long process times at high temperatures, unmolten polyamide 12 material
ages during the manufacturing process. Hence, it needs to be refreshed with new
material for further build cycles. In application, refresh rates of about 50 %
are commonly used. In this work, the recycling optimized material PA 2221 from
EOS is analyzed along a series of 13 build and refresh cycles using a reduced
refresh rate of 32 %. Before and after every build, the powder is analyzed regarding
melt properties determined by MVR and DSC measurements. Thereby, in-process ageing
effects are investigated and the steady-state conditions are determined accordingly.
In addition, powder properties are directly linked to resulting mechanical and
geometrical part properties. Key findings are a robust DSC measurement method
for polyamide 12 powder, constant “circulated” material properties after three
build/refresh cycles and robust tensile properties along the whole tested powder
life cycle. As a result, process conditions of PA 2221 using reduced refresh rates
can be derived from this work.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Johannes
full_name: Lohn, Johannes
last_name: Lohn
- first_name: E.
full_name: Hermann, E.
last_name: Hermann
- first_name: Monika
full_name: Gessler, Monika
last_name: Gessler
- first_name: S.
full_name: Tenbrink, S.
last_name: Tenbrink
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Lohn J, Hermann E, Gessler M, Tenbrink S, Schmid H-J. Material
Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low
Refresh Rates. In: 26th Annual International Solid Freeform Fabrication Symposium.
Vol 26. ; 2015:540-549. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf'
apa: Josupeit, S., Lohn, J., Hermann, E., Gessler, M., Tenbrink, S., & Schmid,
H.-J. (2015). Material Properties of Laser Sintered Polyamide 12 as Function of
Build Cycles Using Low Refresh Rates. In 26th Annual International Solid Freeform
Fabrication Symposium (Vol. 26, pp. 540–549). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Lohn_Hermann_Gessler_Tenbrink_Schmid_2015, title={Material
Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low
Refresh Rates}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit,
Stefan and Lohn, Johannes and Hermann, E. and Gessler, Monika and Tenbrink, S.
and Schmid, Hans-Joachim}, year={2015}, pages={540–549} }'
chicago: Josupeit, Stefan, Johannes Lohn, E. Hermann, Monika Gessler, S. Tenbrink,
and Hans-Joachim Schmid. “Material Properties of Laser Sintered Polyamide 12 as
Function of Build Cycles Using Low Refresh Rates.” In 26th Annual International
Solid Freeform Fabrication Symposium, 26:540–49, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
ieee: S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid,
“Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles
Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication
Symposium, 2015, vol. 26, pp. 540–549.
mla: Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12
as Function of Build Cycles Using Low Refresh Rates.” 26th Annual International
Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
short: 'S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid,
in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp.
540–549.'
date_created: 2021-05-14T07:46:18Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
intvolume: ' 26'
language:
- iso: eng
page: 540-549
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles
Using Low Refresh Rates
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22189'
abstract:
- lang: eng
text: The layered structure of Additive Manufacturing processes results in a stairstepping
effect of the surface topographies. In general the impact of this effect strongly
depends on the build angle of a surface, whereas the overall surface roughness
is caused by the resolution of the specific AM process. The aim of this work is
the prediction of the surface quality in dependence of the building orientation
of a part. These results can finally be used to optimize the orientation to get
a desired surface quality. As not every area of a part can be optimized, a predetermination
of areas can be used to improve the surface quality of important areas. The model
uses the digital STL format of a part as this is necessary for all AM machines
to build it. Each triangle is assigned with a roughness value and by testing different
orientations the best one can be found. This approach needs a database for the
surface qualities. This must be done separately for each Additive Manufacturing
process and is shown exemplary with a surface topography simulation for the laser
sintering process.
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Marcel
full_name: Toews, Marcel
last_name: Toews
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Toews M, Schmid H-J. Surface roughness optimized alignment of parts
for additive manufacturing processes. In: 26th Annual International Solid Freeform
Fabrication Symposium. Vol 26. ; 2015:1334-1344. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf'
apa: Delfs, P., Toews, M., & Schmid, H.-J. (2015). Surface roughness optimized
alignment of parts for additive manufacturing processes. In 26th Annual International
Solid Freeform Fabrication Symposium (Vol. 26, pp. 1334–1344). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
bibtex: '@inproceedings{Delfs_Toews_Schmid_2015, title={Surface roughness optimized
alignment of parts for additive manufacturing processes}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Toews, Marcel and Schmid, Hans-Joachim}, year={2015}, pages={1334–1344}
}'
chicago: Delfs, Patrick, Marcel Toews, and Hans-Joachim Schmid. “Surface Roughness
Optimized Alignment of Parts for Additive Manufacturing Processes.” In 26th
Annual International Solid Freeform Fabrication Symposium, 26:1334–44, 2015.
http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
ieee: P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment
of parts for additive manufacturing processes,” in 26th Annual International
Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1334–1344.
mla: Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for
Additive Manufacturing Processes.” 26th Annual International Solid Freeform
Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
short: 'P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform
Fabrication Symposium, 2015, pp. 1334–1344.'
date_created: 2021-05-14T07:46:20Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
intvolume: ' 26'
language:
- iso: eng
page: 1334-1344
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Surface roughness optimized alignment of parts for additive manufacturing processes
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22199'
abstract:
- lang: eng
text: Powder ageing effects due to thermal load usually lead to a limited recyclability
of unmolten polyamide 12 powders in the laser sintering process. In this work,
the recycling optimized material PA 2221 is analyzed regarding its ageing behavior
along a series of more than ten build/refresh cycles using a refresh ratio of
about 30%. Thereby, the melt viscosity is measured before and after every cycle
and the “steady-state” condition is determined accordingly. In addition, the material
properties of parts manufactured with PA 2221 are discussed dependent on different
process parameters and compared to parts made of standard PA 2200 material with
a refresh rate of about 50%. These parameters include the mechanical properties
as well as for example the impact strength and geometrical properties as function
of layer thickness and testing temperature. As a result, the optimal process conditions
and achievable material properties for PA 2221 can be derived from this work.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: S.
full_name: Tutzschky, S.
last_name: Tutzschky
- first_name: M.
full_name: Gessler, M.
last_name: Gessler
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Tutzschky S, Gessler M, Schmid H-J. Powder ageing and material
properties of laser sintered polyamide 12 using low refresh rates. In: Proceedings
of the Rapid Tech 2015. Springer Vieweg; 2015:63-78. doi:10.1007/978-3-662-48473-9_5'
apa: Josupeit, S., Tutzschky, S., Gessler, M., & Schmid, H.-J. (2015). Powder
ageing and material properties of laser sintered polyamide 12 using low refresh
rates. In Proceedings of the Rapid Tech 2015 (pp. 63–78). Springer Vieweg.
https://doi.org/10.1007/978-3-662-48473-9_5
bibtex: '@inproceedings{Josupeit_Tutzschky_Gessler_Schmid_2015, title={Powder ageing
and material properties of laser sintered polyamide 12 using low refresh rates},
DOI={10.1007/978-3-662-48473-9_5},
booktitle={Proceedings of the Rapid Tech 2015}, publisher={Springer Vieweg}, author={Josupeit,
Stefan and Tutzschky, S. and Gessler, M. and Schmid, Hans-Joachim}, year={2015},
pages={63–78} }'
chicago: Josupeit, Stefan, S. Tutzschky, M. Gessler, and Hans-Joachim Schmid. “Powder
Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh
Rates.” In Proceedings of the Rapid Tech 2015, 63–78. Springer Vieweg,
2015. https://doi.org/10.1007/978-3-662-48473-9_5.
ieee: S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and
material properties of laser sintered polyamide 12 using low refresh rates,” in
Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
mla: Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered
Polyamide 12 Using Low Refresh Rates.” Proceedings of the Rapid Tech 2015,
Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
short: 'S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of
the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.'
date_created: 2021-05-14T07:46:32Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1007/978-3-662-48473-9_5
language:
- iso: eng
page: 63-78
publication: Proceedings of the Rapid Tech 2015
publication_identifier:
isbn:
- 978-3-662-48473-9
publisher: Springer Vieweg
status: public
title: Powder ageing and material properties of laser sintered polyamide 12 using
low refresh rates
type: conference
user_id: '71545'
year: '2015'
...
---
_id: '22394'
abstract:
- lang: eng
text: Purpose – The purpose of this paper is to present Design Rules for additive
manufacturing and a method for their development. Design/methodology/approach
– First, a process-independent method for the development of Design Rules was
worked out. Therefore, geometrical standard elements and attributes that characterize
the elements’ shapes have been defined. Next, the standard elements have been
manufactured with different attribute values with Laser Sintering, Laser Melting
and Fused Deposition Modeling, and their geometrical quality was examined. From
the results, Design Rules for additive manufacturing were derived and summarized
in a catalogue. Findings – Due to the process independent method, Design Rules
were developed that apply for the different considered additive manufacturing
technologies equally. These Design Rules are completely function-independent and
easily transferable to individual part designs. Research limitations/implications
– The developed Design Rules can only apply for the considered boundary conditions.
To extend the Design Rules’ validity, their applicability should be proven for
other boundary conditions. Practical implications – The developed Design Rules
practically support the design of technical parts. Additionally they can be used
for training and teaching in the field of “design for additive manufacturing”.
Originality/value – The developed Design Rules constitute a first step toward
general Design Rules for Additive Manufacturing. Thus, they might form a suitable
basis for further scientific approaches, and the Design Rules can be used to set
up teaching documentations for lessons and seminars.
author:
- first_name: Guido
full_name: dell'Aere, Guido
last_name: dell'Aere
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: dell’Aere G, Zimmer D. On design for Additive Manufacturing - evaluating geometrical
limitations. Rapid Prototyping Journal. 2015;21(6):662-670. doi:10.1108/RPJ-06-2013-0060
apa: dell’Aere, G., & Zimmer, D. (2015). On design for Additive Manufacturing
- evaluating geometrical limitations. Rapid Prototyping Journal, 21(6),
662–670. https://doi.org/10.1108/RPJ-06-2013-0060
bibtex: '@article{dell’Aere_Zimmer_2015, title={On design for Additive Manufacturing
- evaluating geometrical limitations}, volume={21}, DOI={10.1108/RPJ-06-2013-0060},
number={6}, journal={Rapid Prototyping Journal}, publisher={Emerald Group Publishing
Limited}, author={dell’Aere, Guido and Zimmer, Detmar}, year={2015}, pages={662–670}
}'
chicago: 'Aere, Guido dell’, and Detmar Zimmer. “On Design for Additive Manufacturing
- Evaluating Geometrical Limitations.” Rapid Prototyping Journal 21, no.
6 (2015): 662–70. https://doi.org/10.1108/RPJ-06-2013-0060.'
ieee: G. dell’Aere and D. Zimmer, “On design for Additive Manufacturing - evaluating
geometrical limitations,” Rapid Prototyping Journal, vol. 21, no. 6, pp.
662–670, 2015.
mla: dell’Aere, Guido, and Detmar Zimmer. “On Design for Additive Manufacturing
- Evaluating Geometrical Limitations.” Rapid Prototyping Journal, vol.
21, no. 6, Emerald Group Publishing Limited, 2015, pp. 662–70, doi:10.1108/RPJ-06-2013-0060.
short: G. dell’Aere, D. Zimmer, Rapid Prototyping Journal 21 (2015) 662–670.
date_created: 2021-06-15T11:09:20Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1108/RPJ-06-2013-0060
intvolume: ' 21'
issue: '6'
language:
- iso: eng
page: 662-670
publication: Rapid Prototyping Journal
publication_identifier:
isbn:
- 1355-2546
publisher: Emerald Group Publishing Limited
status: public
title: On design for Additive Manufacturing - evaluating geometrical limitations
type: journal_article
user_id: '38077'
volume: 21
year: '2015'
...
---
_id: '22395'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
last_name: Lieneke
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Nils
full_name: Funke, Nils
last_name: Funke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Adam G, Leuders S, et al. Entwicklung einer Methode zur systematischen
Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In: Proceedings
of the Rapid Tech 2015. ; 2015.'
apa: Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer,
D. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren. In Proceedings of the Rapid Tech 2015.
bibtex: '@inproceedings{Lieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015,
title={Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren}, booktitle={Proceedings of the Rapid Tech 2015},
author={Lieneke, Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick
and Josupeit, Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar}, year={2015}
}'
chicago: Lieneke, Tobias, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit,
Patrick Delfs, Nils Funke, and Detmar Zimmer. “Entwicklung Einer Methode Zur Systematischen
Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” In Proceedings
of the Rapid Tech 2015, 2015.
ieee: T. Lieneke et al., “Entwicklung einer Methode zur systematischen Erarbeitung
von Maßtoleranzen für additive Fertigungsverfahren,” in Proceedings of the
Rapid Tech 2015, 2015.
mla: Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung
von Maßtoleranzen Für Additive Fertigungsverfahren.” Proceedings of the Rapid
Tech 2015, 2015.
short: 'T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke,
D. Zimmer, in: Proceedings of the Rapid Tech 2015, 2015.'
date_created: 2021-06-15T11:09:21Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '150'
language:
- iso: eng
publication: Proceedings of the Rapid Tech 2015
status: public
title: Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren
type: conference
user_id: '38077'
year: '2015'
...