---
_id: '23965'
author:
- first_name: M.
full_name: Piper, M.
last_name: Piper
- first_name: A.
full_name: Zibart, A.
last_name: Zibart
- first_name: J.M.
full_name: Tran, J.M.
last_name: Tran
- first_name: E.Y.
full_name: Kenig, E.Y.
last_name: Kenig
citation:
ama: Piper M, Zibart A, Tran JM, Kenig EY. Numerical investigation of turbulent
forced convection heat transfer in pillow plates. International Journal of
Heat and Mass Transfer. 2015:516-527. doi:10.1016/j.ijheatmasstransfer.2015.11.014
apa: Piper, M., Zibart, A., Tran, J. M., & Kenig, E. Y. (2015). Numerical investigation
of turbulent forced convection heat transfer in pillow plates. International
Journal of Heat and Mass Transfer, 516–527. https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.014
bibtex: '@article{Piper_Zibart_Tran_Kenig_2015, title={Numerical investigation of
turbulent forced convection heat transfer in pillow plates}, DOI={10.1016/j.ijheatmasstransfer.2015.11.014},
journal={International Journal of Heat and Mass Transfer}, author={Piper, M. and
Zibart, A. and Tran, J.M. and Kenig, E.Y.}, year={2015}, pages={516–527} }'
chicago: Piper, M., A. Zibart, J.M. Tran, and E.Y. Kenig. “Numerical Investigation
of Turbulent Forced Convection Heat Transfer in Pillow Plates.” International
Journal of Heat and Mass Transfer, 2015, 516–27. https://doi.org/10.1016/j.ijheatmasstransfer.2015.11.014.
ieee: M. Piper, A. Zibart, J. M. Tran, and E. Y. Kenig, “Numerical investigation
of turbulent forced convection heat transfer in pillow plates,” International
Journal of Heat and Mass Transfer, pp. 516–527, 2015.
mla: Piper, M., et al. “Numerical Investigation of Turbulent Forced Convection Heat
Transfer in Pillow Plates.” International Journal of Heat and Mass Transfer,
2015, pp. 516–27, doi:10.1016/j.ijheatmasstransfer.2015.11.014.
short: M. Piper, A. Zibart, J.M. Tran, E.Y. Kenig, International Journal of Heat
and Mass Transfer (2015) 516–527.
date_created: 2021-09-08T10:40:47Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '145'
doi: 10.1016/j.ijheatmasstransfer.2015.11.014
language:
- iso: eng
page: 516-527
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: International Journal of Heat and Mass Transfer
publication_identifier:
issn:
- 0017-9310
publication_status: published
status: public
title: Numerical investigation of turbulent forced convection heat transfer in pillow
plates
type: journal_article
user_id: '11029'
year: '2015'
...
---
_id: '23974'
author:
- first_name: Alexander
full_name: Zibart, Alexander
id: '11029'
last_name: Zibart
- first_name: Rositsa
full_name: Cherkezova, Rositsa
last_name: Cherkezova
- first_name: 'Heiko '
full_name: 'Figge, Heiko '
last_name: Figge
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Zibart A, Cherkezova R, Figge H, Kenig E. Optimierung der Kühlung eines On-Board-Ladegeräts
für elektrisch betriebene Kraftfahrzeuge mithilfe der CFD-Methoden. In: ; 2015.
doi:10.1002/cite.201550048'
apa: Zibart, A., Cherkezova, R., Figge, H., & Kenig, E. (2015). Optimierung
der Kühlung eines On-Board-Ladegeräts für elektrisch betriebene Kraftfahrzeuge
mithilfe der CFD-Methoden. Presented at the Jahrestreffen der ProcessNet-Fachgemeinschaft
Fluiddynamik und Trenntechnik, Bamberg. https://doi.org/10.1002/cite.201550048
bibtex: '@inproceedings{Zibart_Cherkezova_Figge_Kenig_2015, title={Optimierung der
Kühlung eines On-Board-Ladegeräts für elektrisch betriebene Kraftfahrzeuge mithilfe
der CFD-Methoden}, DOI={10.1002/cite.201550048},
author={Zibart, Alexander and Cherkezova, Rositsa and Figge, Heiko and Kenig,
Eugeny}, year={2015} }'
chicago: Zibart, Alexander, Rositsa Cherkezova, Heiko Figge, and Eugeny Kenig.
“Optimierung Der Kühlung Eines On-Board-Ladegeräts Für Elektrisch Betriebene Kraftfahrzeuge
Mithilfe Der CFD-Methoden,” 2015. https://doi.org/10.1002/cite.201550048.
ieee: A. Zibart, R. Cherkezova, H. Figge, and E. Kenig, “Optimierung der Kühlung
eines On-Board-Ladegeräts für elektrisch betriebene Kraftfahrzeuge mithilfe der
CFD-Methoden,” presented at the Jahrestreffen der ProcessNet-Fachgemeinschaft
Fluiddynamik und Trenntechnik, Bamberg, 2015.
mla: Zibart, Alexander, et al. Optimierung Der Kühlung Eines On-Board-Ladegeräts
Für Elektrisch Betriebene Kraftfahrzeuge Mithilfe Der CFD-Methoden. 2015,
doi:10.1002/cite.201550048.
short: 'A. Zibart, R. Cherkezova, H. Figge, E. Kenig, in: 2015.'
conference:
location: Bamberg
name: Jahrestreffen der ProcessNet-Fachgemeinschaft Fluiddynamik und Trenntechnik
date_created: 2021-09-08T11:15:32Z
date_updated: 2022-01-06T06:56:04Z
department:
- _id: '9'
- _id: '145'
doi: 10.1002/cite.201550048
language:
- iso: eng
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
status: public
title: Optimierung der Kühlung eines On-Board-Ladegeräts für elektrisch betriebene
Kraftfahrzeuge mithilfe der CFD-Methoden
type: conference_abstract
user_id: '11029'
year: '2015'
...
---
_id: '22108'
author:
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: H.A.
full_name: Richard, H.A.
last_name: Richard
citation:
ama: 'Reschetnik W, Riemer A, Richard HA. Einsatz additiver Fertigung zur Optimierung
des Ermüdungsverhaltens von gekerbten Strukturen. In: DVM - Tagung - Additiv
Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und
-Prüfung e.V. ; 2015:63-72.'
apa: Reschetnik, W., Riemer, A., & Richard, H. A. (2015). Einsatz additiver
Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen. In
DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband
für Materialforschung und -prüfung e.V. (pp. 63–72).
bibtex: '@inproceedings{Reschetnik_Riemer_Richard_2015, title={Einsatz additiver
Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen}, booktitle={DVM
- Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung
und -prüfung e.V.}, author={Reschetnik, W. and Riemer, A. and Richard, H.A.},
year={2015}, pages={63–72} }'
chicago: Reschetnik, W., A. Riemer, and H.A. Richard. “Einsatz Additiver Fertigung
Zur Optimierung Des Ermüdungsverhaltens von Gekerbten Strukturen.” In DVM -
Tagung - Additiv Gefertigte Bauteile Und Strukturen, Deutscher Verband Für Materialforschung
Und -Prüfung e.V., 63–72, 2015.
ieee: W. Reschetnik, A. Riemer, and H. A. Richard, “Einsatz additiver Fertigung
zur Optimierung des Ermüdungsverhaltens von gekerbten Strukturen,” in DVM -
Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher Verband für Materialforschung
und -prüfung e.V., 2015, pp. 63–72.
mla: Reschetnik, W., et al. “Einsatz Additiver Fertigung Zur Optimierung Des Ermüdungsverhaltens
von Gekerbten Strukturen.” DVM - Tagung - Additiv Gefertigte Bauteile Und Strukturen,
Deutscher Verband Für Materialforschung Und -Prüfung e.V., 2015, pp. 63–72.
short: 'W. Reschetnik, A. Riemer, H.A. Richard, in: DVM - Tagung - Additiv Gefertigte
Bauteile Und Strukturen, Deutscher Verband Für Materialforschung Und -Prüfung
e.V., 2015, pp. 63–72.'
date_created: 2021-05-11T07:47:52Z
date_updated: 2022-01-06T06:55:26Z
department:
- _id: '143'
- _id: '219'
page: 63-72
publication: DVM - Tagung - Additiv gefertigte Bauteile und Strukturen, Deutscher
Verband für Materialforschung und -prüfung e.V.
status: public
title: Einsatz additiver Fertigung zur Optimierung des Ermüdungsverhaltens von gekerbten
Strukturen
type: conference
user_id: '60486'
year: '2015'
...
---
_id: '22178'
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Z.
full_name: Li, Z.
last_name: Li
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Li Z, Schmid H-J. Mass finishing of laser sintered parts. In: 26th
Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:514-526.
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf'
apa: Delfs, P., Li, Z., & Schmid, H.-J. (2015). Mass finishing of laser sintered
parts. In 26th Annual International Solid Freeform Fabrication Symposium
(Vol. 26, pp. 514–526). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
bibtex: '@inproceedings{Delfs_Li_Schmid_2015, title={Mass finishing of laser sintered
parts}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Li, Z. and Schmid, Hans-Joachim}, year={2015}, pages={514–526} }'
chicago: Delfs, Patrick, Z. Li, and Hans-Joachim Schmid. “Mass Finishing of Laser
Sintered Parts.” In 26th Annual International Solid Freeform Fabrication Symposium,
26:514–26, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
ieee: P. Delfs, Z. Li, and H.-J. Schmid, “Mass finishing of laser sintered parts,”
in 26th Annual International Solid Freeform Fabrication Symposium, 2015,
vol. 26, pp. 514–526.
mla: Delfs, Patrick, et al. “Mass Finishing of Laser Sintered Parts.” 26th Annual
International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 514–26,
doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf.
short: 'P. Delfs, Z. Li, H.-J. Schmid, in: 26th Annual International Solid Freeform
Fabrication Symposium, 2015, pp. 514–526.'
date_created: 2021-05-14T07:46:07Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-41-Delfs.pdf
intvolume: ' 26'
language:
- iso: eng
page: 514-526
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Mass finishing of laser sintered parts
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22179'
abstract:
- lang: eng
text: The temperature distribution and history within laser sintered part cakes
is an important aspect regarding the process quality and reproducibility of the
polymer laser sintering process. Especially the temperature history during the
build and cooling phase is decisive for powder ageing effects and the development
of part quality characteristics. In this work, a measurement system for three-dimensional
in-process temperature measurements is set up and the influence of different parameters
on the inner part cake temperature distribution and history is analyzed. Important
factors are not only geometrical build job parameters like the part packing density
and build height, but also process parameters like the layer thickness and bulk
powder density. Individual in-process temperature profiles at different positions
within a part cake are finally correlated with powder ageing effects. The results
of this work help to understand the temperature history dependency of powder and
part properties and can therefore be used to develop optimized process controls.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Schmid H-J. Temperature History within Laser Sintered Part Cakes
and its Influence on Process Quality. In: 26th Annual International Solid Freeform
Fabrication Symposium. Vol 26. ; 2015:190-199. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf'
apa: Josupeit, S., & Schmid, H.-J. (2015). Temperature History within Laser
Sintered Part Cakes and its Influence on Process Quality. In 26th Annual International
Solid Freeform Fabrication Symposium (Vol. 26, pp. 190–199). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Schmid_2015, title={Temperature History within
Laser Sintered Part Cakes and its Influence on Process Quality}, volume={26},
DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit,
Stefan and Schmid, Hans-Joachim}, year={2015}, pages={190–199} }'
chicago: Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within
Laser Sintered Part Cakes and Its Influence on Process Quality.” In 26th Annual
International Solid Freeform Fabrication Symposium, 26:190–99, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
ieee: S. Josupeit and H.-J. Schmid, “Temperature History within Laser Sintered Part
Cakes and its Influence on Process Quality,” in 26th Annual International Solid
Freeform Fabrication Symposium, 2015, vol. 26, pp. 190–199.
mla: Josupeit, Stefan, and Hans-Joachim Schmid. “Temperature History within Laser
Sintered Part Cakes and Its Influence on Process Quality.” 26th Annual International
Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 190–99, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf.
short: 'S. Josupeit, H.-J. Schmid, in: 26th Annual International Solid Freeform
Fabrication Symposium, 2015, pp. 190–199.'
date_created: 2021-05-14T07:46:09Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-15-Josupeit.pdf
intvolume: ' 26'
language:
- iso: eng
page: 190-199
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Temperature History within Laser Sintered Part Cakes and its Influence on Process
Quality
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22187'
abstract:
- lang: eng
text: Due to long process times at high temperatures, unmolten polyamide 12 material
ages during the manufacturing process. Hence, it needs to be refreshed with new
material for further build cycles. In application, refresh rates of about 50 %
are commonly used. In this work, the recycling optimized material PA 2221 from
EOS is analyzed along a series of 13 build and refresh cycles using a reduced
refresh rate of 32 %. Before and after every build, the powder is analyzed regarding
melt properties determined by MVR and DSC measurements. Thereby, in-process ageing
effects are investigated and the steady-state conditions are determined accordingly.
In addition, powder properties are directly linked to resulting mechanical and
geometrical part properties. Key findings are a robust DSC measurement method
for polyamide 12 powder, constant “circulated” material properties after three
build/refresh cycles and robust tensile properties along the whole tested powder
life cycle. As a result, process conditions of PA 2221 using reduced refresh rates
can be derived from this work.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Johannes
full_name: Lohn, Johannes
last_name: Lohn
- first_name: E.
full_name: Hermann, E.
last_name: Hermann
- first_name: Monika
full_name: Gessler, Monika
last_name: Gessler
- first_name: S.
full_name: Tenbrink, S.
last_name: Tenbrink
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Lohn J, Hermann E, Gessler M, Tenbrink S, Schmid H-J. Material
Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low
Refresh Rates. In: 26th Annual International Solid Freeform Fabrication Symposium.
Vol 26. ; 2015:540-549. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf'
apa: Josupeit, S., Lohn, J., Hermann, E., Gessler, M., Tenbrink, S., & Schmid,
H.-J. (2015). Material Properties of Laser Sintered Polyamide 12 as Function of
Build Cycles Using Low Refresh Rates. In 26th Annual International Solid Freeform
Fabrication Symposium (Vol. 26, pp. 540–549). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Lohn_Hermann_Gessler_Tenbrink_Schmid_2015, title={Material
Properties of Laser Sintered Polyamide 12 as Function of Build Cycles Using Low
Refresh Rates}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit,
Stefan and Lohn, Johannes and Hermann, E. and Gessler, Monika and Tenbrink, S.
and Schmid, Hans-Joachim}, year={2015}, pages={540–549} }'
chicago: Josupeit, Stefan, Johannes Lohn, E. Hermann, Monika Gessler, S. Tenbrink,
and Hans-Joachim Schmid. “Material Properties of Laser Sintered Polyamide 12 as
Function of Build Cycles Using Low Refresh Rates.” In 26th Annual International
Solid Freeform Fabrication Symposium, 26:540–49, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
ieee: S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, and H.-J. Schmid,
“Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles
Using Low Refresh Rates,” in 26th Annual International Solid Freeform Fabrication
Symposium, 2015, vol. 26, pp. 540–549.
mla: Josupeit, Stefan, et al. “Material Properties of Laser Sintered Polyamide 12
as Function of Build Cycles Using Low Refresh Rates.” 26th Annual International
Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 540–49, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf.
short: 'S. Josupeit, J. Lohn, E. Hermann, M. Gessler, S. Tenbrink, H.-J. Schmid,
in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp.
540–549.'
date_created: 2021-05-14T07:46:18Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-43-Josupeit.pdf
intvolume: ' 26'
language:
- iso: eng
page: 540-549
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Material Properties of Laser Sintered Polyamide 12 as Function of Build Cycles
Using Low Refresh Rates
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22189'
abstract:
- lang: eng
text: The layered structure of Additive Manufacturing processes results in a stairstepping
effect of the surface topographies. In general the impact of this effect strongly
depends on the build angle of a surface, whereas the overall surface roughness
is caused by the resolution of the specific AM process. The aim of this work is
the prediction of the surface quality in dependence of the building orientation
of a part. These results can finally be used to optimize the orientation to get
a desired surface quality. As not every area of a part can be optimized, a predetermination
of areas can be used to improve the surface quality of important areas. The model
uses the digital STL format of a part as this is necessary for all AM machines
to build it. Each triangle is assigned with a roughness value and by testing different
orientations the best one can be found. This approach needs a database for the
surface qualities. This must be done separately for each Additive Manufacturing
process and is shown exemplary with a surface topography simulation for the laser
sintering process.
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Marcel
full_name: Toews, Marcel
last_name: Toews
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Toews M, Schmid H-J. Surface roughness optimized alignment of parts
for additive manufacturing processes. In: 26th Annual International Solid Freeform
Fabrication Symposium. Vol 26. ; 2015:1334-1344. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf'
apa: Delfs, P., Toews, M., & Schmid, H.-J. (2015). Surface roughness optimized
alignment of parts for additive manufacturing processes. In 26th Annual International
Solid Freeform Fabrication Symposium (Vol. 26, pp. 1334–1344). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
bibtex: '@inproceedings{Delfs_Toews_Schmid_2015, title={Surface roughness optimized
alignment of parts for additive manufacturing processes}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Toews, Marcel and Schmid, Hans-Joachim}, year={2015}, pages={1334–1344}
}'
chicago: Delfs, Patrick, Marcel Toews, and Hans-Joachim Schmid. “Surface Roughness
Optimized Alignment of Parts for Additive Manufacturing Processes.” In 26th
Annual International Solid Freeform Fabrication Symposium, 26:1334–44, 2015.
http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
ieee: P. Delfs, M. Toews, and H.-J. Schmid, “Surface roughness optimized alignment
of parts for additive manufacturing processes,” in 26th Annual International
Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1334–1344.
mla: Delfs, Patrick, et al. “Surface Roughness Optimized Alignment of Parts for
Additive Manufacturing Processes.” 26th Annual International Solid Freeform
Fabrication Symposium, vol. 26, 2015, pp. 1334–44, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf.
short: 'P. Delfs, M. Toews, H.-J. Schmid, in: 26th Annual International Solid Freeform
Fabrication Symposium, 2015, pp. 1334–1344.'
date_created: 2021-05-14T07:46:20Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-107-Delfs.pdf
intvolume: ' 26'
language:
- iso: eng
page: 1334-1344
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Surface roughness optimized alignment of parts for additive manufacturing processes
type: conference
user_id: '71545'
volume: 26
year: '2015'
...
---
_id: '22199'
abstract:
- lang: eng
text: Powder ageing effects due to thermal load usually lead to a limited recyclability
of unmolten polyamide 12 powders in the laser sintering process. In this work,
the recycling optimized material PA 2221 is analyzed regarding its ageing behavior
along a series of more than ten build/refresh cycles using a refresh ratio of
about 30%. Thereby, the melt viscosity is measured before and after every cycle
and the “steady-state” condition is determined accordingly. In addition, the material
properties of parts manufactured with PA 2221 are discussed dependent on different
process parameters and compared to parts made of standard PA 2200 material with
a refresh rate of about 50%. These parameters include the mechanical properties
as well as for example the impact strength and geometrical properties as function
of layer thickness and testing temperature. As a result, the optimal process conditions
and achievable material properties for PA 2221 can be derived from this work.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: S.
full_name: Tutzschky, S.
last_name: Tutzschky
- first_name: M.
full_name: Gessler, M.
last_name: Gessler
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Tutzschky S, Gessler M, Schmid H-J. Powder ageing and material
properties of laser sintered polyamide 12 using low refresh rates. In: Proceedings
of the Rapid Tech 2015. Springer Vieweg; 2015:63-78. doi:10.1007/978-3-662-48473-9_5'
apa: Josupeit, S., Tutzschky, S., Gessler, M., & Schmid, H.-J. (2015). Powder
ageing and material properties of laser sintered polyamide 12 using low refresh
rates. In Proceedings of the Rapid Tech 2015 (pp. 63–78). Springer Vieweg.
https://doi.org/10.1007/978-3-662-48473-9_5
bibtex: '@inproceedings{Josupeit_Tutzschky_Gessler_Schmid_2015, title={Powder ageing
and material properties of laser sintered polyamide 12 using low refresh rates},
DOI={10.1007/978-3-662-48473-9_5},
booktitle={Proceedings of the Rapid Tech 2015}, publisher={Springer Vieweg}, author={Josupeit,
Stefan and Tutzschky, S. and Gessler, M. and Schmid, Hans-Joachim}, year={2015},
pages={63–78} }'
chicago: Josupeit, Stefan, S. Tutzschky, M. Gessler, and Hans-Joachim Schmid. “Powder
Ageing and Material Properties of Laser Sintered Polyamide 12 Using Low Refresh
Rates.” In Proceedings of the Rapid Tech 2015, 63–78. Springer Vieweg,
2015. https://doi.org/10.1007/978-3-662-48473-9_5.
ieee: S. Josupeit, S. Tutzschky, M. Gessler, and H.-J. Schmid, “Powder ageing and
material properties of laser sintered polyamide 12 using low refresh rates,” in
Proceedings of the Rapid Tech 2015, 2015, pp. 63–78.
mla: Josupeit, Stefan, et al. “Powder Ageing and Material Properties of Laser Sintered
Polyamide 12 Using Low Refresh Rates.” Proceedings of the Rapid Tech 2015,
Springer Vieweg, 2015, pp. 63–78, doi:10.1007/978-3-662-48473-9_5.
short: 'S. Josupeit, S. Tutzschky, M. Gessler, H.-J. Schmid, in: Proceedings of
the Rapid Tech 2015, Springer Vieweg, 2015, pp. 63–78.'
date_created: 2021-05-14T07:46:32Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1007/978-3-662-48473-9_5
language:
- iso: eng
page: 63-78
publication: Proceedings of the Rapid Tech 2015
publication_identifier:
isbn:
- 978-3-662-48473-9
publisher: Springer Vieweg
status: public
title: Powder ageing and material properties of laser sintered polyamide 12 using
low refresh rates
type: conference
user_id: '71545'
year: '2015'
...
---
_id: '22394'
abstract:
- lang: eng
text: Purpose – The purpose of this paper is to present Design Rules for additive
manufacturing and a method for their development. Design/methodology/approach
– First, a process-independent method for the development of Design Rules was
worked out. Therefore, geometrical standard elements and attributes that characterize
the elements’ shapes have been defined. Next, the standard elements have been
manufactured with different attribute values with Laser Sintering, Laser Melting
and Fused Deposition Modeling, and their geometrical quality was examined. From
the results, Design Rules for additive manufacturing were derived and summarized
in a catalogue. Findings – Due to the process independent method, Design Rules
were developed that apply for the different considered additive manufacturing
technologies equally. These Design Rules are completely function-independent and
easily transferable to individual part designs. Research limitations/implications
– The developed Design Rules can only apply for the considered boundary conditions.
To extend the Design Rules’ validity, their applicability should be proven for
other boundary conditions. Practical implications – The developed Design Rules
practically support the design of technical parts. Additionally they can be used
for training and teaching in the field of “design for additive manufacturing”.
Originality/value – The developed Design Rules constitute a first step toward
general Design Rules for Additive Manufacturing. Thus, they might form a suitable
basis for further scientific approaches, and the Design Rules can be used to set
up teaching documentations for lessons and seminars.
author:
- first_name: Guido
full_name: dell'Aere, Guido
last_name: dell'Aere
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: dell’Aere G, Zimmer D. On design for Additive Manufacturing - evaluating geometrical
limitations. Rapid Prototyping Journal. 2015;21(6):662-670. doi:10.1108/RPJ-06-2013-0060
apa: dell’Aere, G., & Zimmer, D. (2015). On design for Additive Manufacturing
- evaluating geometrical limitations. Rapid Prototyping Journal, 21(6),
662–670. https://doi.org/10.1108/RPJ-06-2013-0060
bibtex: '@article{dell’Aere_Zimmer_2015, title={On design for Additive Manufacturing
- evaluating geometrical limitations}, volume={21}, DOI={10.1108/RPJ-06-2013-0060},
number={6}, journal={Rapid Prototyping Journal}, publisher={Emerald Group Publishing
Limited}, author={dell’Aere, Guido and Zimmer, Detmar}, year={2015}, pages={662–670}
}'
chicago: 'Aere, Guido dell’, and Detmar Zimmer. “On Design for Additive Manufacturing
- Evaluating Geometrical Limitations.” Rapid Prototyping Journal 21, no.
6 (2015): 662–70. https://doi.org/10.1108/RPJ-06-2013-0060.'
ieee: G. dell’Aere and D. Zimmer, “On design for Additive Manufacturing - evaluating
geometrical limitations,” Rapid Prototyping Journal, vol. 21, no. 6, pp.
662–670, 2015.
mla: dell’Aere, Guido, and Detmar Zimmer. “On Design for Additive Manufacturing
- Evaluating Geometrical Limitations.” Rapid Prototyping Journal, vol.
21, no. 6, Emerald Group Publishing Limited, 2015, pp. 662–70, doi:10.1108/RPJ-06-2013-0060.
short: G. dell’Aere, D. Zimmer, Rapid Prototyping Journal 21 (2015) 662–670.
date_created: 2021-06-15T11:09:20Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 10.1108/RPJ-06-2013-0060
intvolume: ' 21'
issue: '6'
language:
- iso: eng
page: 662-670
publication: Rapid Prototyping Journal
publication_identifier:
isbn:
- 1355-2546
publisher: Emerald Group Publishing Limited
status: public
title: On design for Additive Manufacturing - evaluating geometrical limitations
type: journal_article
user_id: '38077'
volume: 21
year: '2015'
...
---
_id: '22395'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
last_name: Lieneke
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Nils
full_name: Funke, Nils
last_name: Funke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Adam G, Leuders S, et al. Entwicklung einer Methode zur systematischen
Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren. In: Proceedings
of the Rapid Tech 2015. ; 2015.'
apa: Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer,
D. (2015). Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren. In Proceedings of the Rapid Tech 2015.
bibtex: '@inproceedings{Lieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015,
title={Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren}, booktitle={Proceedings of the Rapid Tech 2015},
author={Lieneke, Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick
and Josupeit, Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar}, year={2015}
}'
chicago: Lieneke, Tobias, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit,
Patrick Delfs, Nils Funke, and Detmar Zimmer. “Entwicklung Einer Methode Zur Systematischen
Erarbeitung von Maßtoleranzen Für Additive Fertigungsverfahren.” In Proceedings
of the Rapid Tech 2015, 2015.
ieee: T. Lieneke et al., “Entwicklung einer Methode zur systematischen Erarbeitung
von Maßtoleranzen für additive Fertigungsverfahren,” in Proceedings of the
Rapid Tech 2015, 2015.
mla: Lieneke, Tobias, et al. “Entwicklung Einer Methode Zur Systematischen Erarbeitung
von Maßtoleranzen Für Additive Fertigungsverfahren.” Proceedings of the Rapid
Tech 2015, 2015.
short: 'T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke,
D. Zimmer, in: Proceedings of the Rapid Tech 2015, 2015.'
date_created: 2021-06-15T11:09:21Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '150'
language:
- iso: eng
publication: Proceedings of the Rapid Tech 2015
status: public
title: Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren
type: conference
user_id: '38077'
year: '2015'
...
---
_id: '22396'
abstract:
- lang: eng
text: Additive manufacturing offers many technical and economical benefits. In order
to profit from these benefits, it is necessary to consider the manufacturing limits
and restrictions. This applies in particular to the geometrical accuracy. Therefore,
the achievable geometrical accuracy needs to be investigated, which enables the
determination of realistic tolerances. Thus, two different aims are considered.
The first aim is the determination of dimensional tolerances that can be stated
if additive manufacturing is used under normal workshop conditions. Within the
second aim, relevant process parameters and manufacturing influences will be optimized
in order to reduce dimensional deviations. To achieve both aims a method was developed
first. This method identifies relevant influential factors on the geometrical
accuracy for the processes Fused Deposition Modeling (FDM), Laser Sintering (LS)
and Laser Melting (LM). Factors were selected that are expected to affect the
geometrical accuracy mainly. The first investigations deal with measuring linear
dimensions on a designed test specimen and the derivation of achievable dimensional
tolerances. This paper will present both, the developed method and the first results
of the experimental investigations.
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Nils
full_name: Funke, Nils
last_name: Funke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Adam G, Leuders S, et al. Systematical determination of tolerances
for additive manufacturing by measuring linear dimensions. In: 26th Annual
International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:371-384.
doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions'
apa: Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer,
D. (2015). Systematical determination of tolerances for additive manufacturing
by measuring linear dimensions. In 26th Annual International Solid Freeform
Fabrication Symposium (Vol. 26, pp. 371–384). https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
bibtex: '@inproceedings{Lieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015,
title={Systematical determination of tolerances for additive manufacturing by
measuring linear dimensions}, volume={26}, DOI={https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Lieneke,
Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick and Josupeit,
Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar}, year={2015}, pages={371–384}
}'
chicago: Lieneke, Tobias, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit,
Patrick Delfs, Nils Funke, and Detmar Zimmer. “Systematical Determination of Tolerances
for Additive Manufacturing by Measuring Linear Dimensions.” In 26th Annual
International Solid Freeform Fabrication Symposium, 26:371–84, 2015. https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
ieee: T. Lieneke et al., “Systematical determination of tolerances for additive
manufacturing by measuring linear dimensions,” in 26th Annual International
Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 371–384.
mla: Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive
Manufacturing by Measuring Linear Dimensions.” 26th Annual International Solid
Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
short: 'T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke,
D. Zimmer, in: 26th Annual International Solid Freeform Fabrication Symposium,
2015, pp. 371–384.'
date_created: 2021-06-15T11:09:22Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '150'
doi: https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
intvolume: ' 26'
language:
- iso: eng
page: 371-384
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Systematical determination of tolerances for additive manufacturing by measuring
linear dimensions
type: conference
user_id: '38077'
volume: 26
year: '2015'
...
---
_id: '22397'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: Adam G. Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven
Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling.
Shaker Verlag; 2015.
apa: Adam, G. (2015). Systematische Erarbeitung von Konstruktionsregeln für die
additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition
Modeling. Shaker Verlag.
bibtex: '@book{Adam_2015, title={Systematische Erarbeitung von Konstruktionsregeln
für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition
Modeling}, publisher={Shaker Verlag}, author={Adam, Guido}, year={2015} }'
chicago: Adam, Guido. Systematische Erarbeitung von Konstruktionsregeln Für Die
Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition
Modeling. Shaker Verlag, 2015.
ieee: G. Adam, Systematische Erarbeitung von Konstruktionsregeln für die additiven
Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling.
Shaker Verlag, 2015.
mla: Adam, Guido. Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven
Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling.
Shaker Verlag, 2015.
short: G. Adam, Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven
Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling,
Shaker Verlag, 2015.
date_created: 2021-06-15T11:09:23Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-8440-3474-5
publisher: Shaker Verlag
status: public
title: Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren
Lasersintern, Laserschmelzen und Fused Deposition Modeling
type: dissertation
user_id: '38077'
year: '2015'
...
---
_id: '22398'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: 'Adam G. On tolerances for additive manufacturing. In: Inside 3D Printing
Conference and Expo. ; 2015.'
apa: Adam, G. (2015). On tolerances for additive manufacturing. In Inside 3D
Printing Conference and Expo.
bibtex: '@inproceedings{Adam_2015, title={On tolerances for additive manufacturing},
booktitle={Inside 3D Printing Conference and Expo}, author={Adam, Guido}, year={2015}
}'
chicago: Adam, Guido. “On Tolerances for Additive Manufacturing.” In Inside 3D
Printing Conference and Expo, 2015.
ieee: G. Adam, “On tolerances for additive manufacturing,” in Inside 3D Printing
Conference and Expo, 2015.
mla: Adam, Guido. “On Tolerances for Additive Manufacturing.” Inside 3D Printing
Conference and Expo, 2015.
short: 'G. Adam, in: Inside 3D Printing Conference and Expo, 2015.'
date_created: 2021-06-15T11:09:25Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
publication: Inside 3D Printing Conference and Expo
status: public
title: On tolerances for additive manufacturing
type: conference
user_id: '38077'
year: '2015'
...
---
_id: '22399'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
citation:
ama: 'Lieneke T. Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren. In: Rapid Tech 2015. ; 2015.'
apa: Lieneke, T. (2015). Entwicklung einer Methode zur systematischen Erarbeitung
von Maßtoleranzen für additive Fertigungsverfahren. In Rapid Tech 2015.
bibtex: '@inproceedings{Lieneke_2015, title={Entwicklung einer Methode zur systematischen
Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren}, booktitle={Rapid
Tech 2015}, author={Lieneke, Tobias}, year={2015} }'
chicago: Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung
von Maßtoleranzen Für Additive Fertigungsverfahren.” In Rapid Tech 2015,
2015.
ieee: T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von
Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
mla: Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung
von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.
short: 'T. Lieneke, in: Rapid Tech 2015, 2015.'
date_created: 2021-06-15T11:09:26Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: Rapid Tech 2015
status: public
title: Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren
type: conference
user_id: '38077'
year: '2015'
...
---
_id: '22400'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
citation:
ama: 'Lieneke T. Systematical determination of dimensional tolerances for additive
manufacturing . In: 26th Annual International Solid Freeform Fabrication Symposium.
Vol 26. ; 2015.'
apa: Lieneke, T. (2015). Systematical determination of dimensional tolerances for
additive manufacturing . In 26th Annual International Solid Freeform Fabrication
Symposium (Vol. 26).
bibtex: '@inproceedings{Lieneke_2015, title={Systematical determination of dimensional
tolerances for additive manufacturing }, volume={26}, booktitle={26th Annual International
Solid Freeform Fabrication Symposium}, author={Lieneke, Tobias}, year={2015} }'
chicago: Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances
for Additive Manufacturing .” In 26th Annual International Solid Freeform Fabrication
Symposium, Vol. 26, 2015.
ieee: T. Lieneke, “Systematical determination of dimensional tolerances for additive
manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium,
2015, vol. 26.
mla: Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for
Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication
Symposium, vol. 26, 2015.
short: 'T. Lieneke, in: 26th Annual International Solid Freeform Fabrication Symposium,
2015.'
date_created: 2021-06-15T11:09:27Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
intvolume: ' 26'
language:
- iso: eng
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: 'Systematical determination of dimensional tolerances for additive manufacturing '
type: conference
user_id: '38077'
volume: 26
year: '2015'
...
---
_id: '22401'
author:
- first_name: Christian
full_name: Hölscher, Christian
last_name: Hölscher
- first_name: Malte
full_name: Strop, Malte
last_name: Strop
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Hölscher C, Strop M, Zimmer D. Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme.
Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe
. 2015;67(1-2):55-66.
apa: Hölscher, C., Strop, M., & Zimmer, D. (2015). Intelligente Betriebsstrategien
für Mehrmotorenantriebssysteme. Konstruktion - Zeitschrift Für Produktentwicklung
Und Ingenieur-Werkstoffe , 67(1–2), 55–66.
bibtex: '@article{Hölscher_Strop_Zimmer_2015, title={Intelligente Betriebsstrategien
für Mehrmotorenantriebssysteme}, volume={67}, number={1–2}, journal={Konstruktion
- Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe }, publisher={Springer-VDI-Verlag
}, author={Hölscher, Christian and Strop, Malte and Zimmer, Detmar}, year={2015},
pages={55–66} }'
chicago: 'Hölscher, Christian, Malte Strop, and Detmar Zimmer. “Intelligente Betriebsstrategien
Für Mehrmotorenantriebssysteme.” Konstruktion - Zeitschrift Für Produktentwicklung
Und Ingenieur-Werkstoffe 67, no. 1–2 (2015): 55–66.'
ieee: C. Hölscher, M. Strop, and D. Zimmer, “Intelligente Betriebsstrategien für
Mehrmotorenantriebssysteme,” Konstruktion - Zeitschrift für Produktentwicklung
und Ingenieur-Werkstoffe , vol. 67, no. 1–2, pp. 55–66, 2015.
mla: Hölscher, Christian, et al. “Intelligente Betriebsstrategien Für Mehrmotorenantriebssysteme.”
Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe
, vol. 67, no. 1–2, Springer-VDI-Verlag , 2015, pp. 55–66.
short: C. Hölscher, M. Strop, D. Zimmer, Konstruktion - Zeitschrift Für Produktentwicklung
Und Ingenieur-Werkstoffe 67 (2015) 55–66.
date_created: 2021-06-15T11:09:28Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
intvolume: ' 67'
issue: 1-2
language:
- iso: eng
page: 55-66
publication: 'Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe '
publication_identifier:
isbn:
- 0373-3300
publisher: 'Springer-VDI-Verlag '
status: public
title: Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme
type: journal_article
user_id: '38077'
volume: 67
year: '2015'
...
---
_id: '22402'
author:
- first_name: Ansgar
full_name: Wiehe, Ansgar
last_name: Wiehe
citation:
ama: Wiehe A. Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen. Der Andere Verlag; 2015.
apa: Wiehe, A. (2015). Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer
Bremsen. Der Andere Verlag.
bibtex: '@book{Wiehe_2015, title={Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer
Bremsen}, publisher={Der Andere Verlag}, author={Wiehe, Ansgar}, year={2015} }'
chicago: Wiehe, Ansgar. Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen. Der Andere Verlag, 2015.
ieee: A. Wiehe, Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer
Bremsen. Der Andere Verlag, 2015.
mla: Wiehe, Ansgar. Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen. Der Andere Verlag, 2015.
short: A. Wiehe, Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen, Der Andere Verlag, 2015.
date_created: 2021-06-15T11:09:29Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-86247-541-4
publisher: Der Andere Verlag
status: public
title: Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen
type: dissertation
user_id: '38077'
year: '2015'
...
---
_id: '22530'
applicant:
- Lenze Drives GmbH; Universität Paderborn
application_date: 2012-03-09
application_number: '12158900.6'
author:
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Karsten
full_name: Nolte, Karsten
last_name: Nolte
- first_name: Jürgen
full_name: Hütte, Jürgen
last_name: Hütte
citation:
ama: Zimmer D, Nolte K, Hütte J. Wellendichtsysteme. 2015.
apa: Zimmer, D., Nolte, K., & Hütte, J. (2015). Wellendichtsysteme.
bibtex: '@article{Zimmer_Nolte_Hütte_2015, title={Wellendichtsysteme}, author={Zimmer,
Detmar and Nolte, Karsten and Hütte, Jürgen}, year={2015} }'
chicago: Zimmer, Detmar, Karsten Nolte, and Jürgen Hütte. “Wellendichtsysteme,”
2015.
ieee: D. Zimmer, K. Nolte, and J. Hütte, “Wellendichtsysteme.” 2015.
mla: Zimmer, Detmar, et al. Wellendichtsysteme. 2015.
short: D. Zimmer, K. Nolte, J. Hütte, (2015).
date_created: 2021-07-05T13:33:56Z
date_updated: 2022-01-06T06:55:36Z
department:
- _id: '146'
ipc: F16J 15/00
ipn: EP 2 497 977 B1.
publication_date: 2015-05-06
status: public
title: Wellendichtsysteme
type: patent
user_id: '38077'
year: '2015'
...
---
_id: '23055'
author:
- first_name: Farisoroosh
full_name: Abrishamchian, Farisoroosh
last_name: Abrishamchian
- first_name: Felix
full_name: Oestersötebier, Felix
last_name: Oestersötebier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Abrishamchian F, Oestersötebier F, Trächtler A. Feature Model Approach For
Managing Variability of Dynamic Behavior Models in Mechatronic Systems. In: Proceedings
of the ASME 2015 International Mechanical Engineering Congress & Exposition.
Houston, Texas: ASME; 2015.'
apa: 'Abrishamchian, F., Oestersötebier, F., & Trächtler, A. (2015). Feature
Model Approach For Managing Variability of Dynamic Behavior Models in Mechatronic
Systems. In Proceedings of the ASME 2015 International Mechanical Engineering
Congress & Exposition. Houston, Texas: ASME.'
bibtex: '@inproceedings{Abrishamchian_Oestersötebier_Trächtler_2015, place={Houston,
Texas}, title={Feature Model Approach For Managing Variability of Dynamic Behavior
Models in Mechatronic Systems}, booktitle={Proceedings of the ASME 2015 International
Mechanical Engineering Congress & Exposition}, publisher={ASME}, author={Abrishamchian,
Farisoroosh and Oestersötebier, Felix and Trächtler, Ansgar}, year={2015} }'
chicago: 'Abrishamchian, Farisoroosh, Felix Oestersötebier, and Ansgar Trächtler.
“Feature Model Approach For Managing Variability of Dynamic Behavior Models in
Mechatronic Systems.” In Proceedings of the ASME 2015 International Mechanical
Engineering Congress & Exposition. Houston, Texas: ASME, 2015.'
ieee: F. Abrishamchian, F. Oestersötebier, and A. Trächtler, “Feature Model Approach
For Managing Variability of Dynamic Behavior Models in Mechatronic Systems,” in
Proceedings of the ASME 2015 International Mechanical Engineering Congress
& Exposition, 2015.
mla: Abrishamchian, Farisoroosh, et al. “Feature Model Approach For Managing Variability
of Dynamic Behavior Models in Mechatronic Systems.” Proceedings of the ASME
2015 International Mechanical Engineering Congress & Exposition, ASME,
2015.
short: 'F. Abrishamchian, F. Oestersötebier, A. Trächtler, in: Proceedings of the
ASME 2015 International Mechanical Engineering Congress & Exposition, ASME,
Houston, Texas, 2015.'
date_created: 2021-08-09T06:42:19Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
place: Houston, Texas
publication: Proceedings of the ASME 2015 International Mechanical Engineering Congress
& Exposition
publisher: ASME
status: public
title: Feature Model Approach For Managing Variability of Dynamic Behavior Models
in Mechatronic Systems
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23056'
author:
- first_name: Fabian
full_name: Bertelsmeier, Fabian
last_name: Bertelsmeier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bertelsmeier F, Trächtler A. Decentralized Controller Reconfiguration Strategies
for Hybrid System Dynamics based on Product-Intelligence. In: 20th IEEE International
Conference on Emerging Technologies and Factory Automation. Luxembourg; 2015.'
apa: Bertelsmeier, F., & Trächtler, A. (2015). Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics based on Product-Intelligence. In 20th
IEEE International Conference on Emerging Technologies and Factory Automation.
Luxembourg.
bibtex: '@inproceedings{Bertelsmeier_Trächtler_2015, place={Luxembourg}, title={Decentralized
Controller Reconfiguration Strategies for Hybrid System Dynamics based on Product-Intelligence},
booktitle={20th IEEE International Conference on Emerging Technologies and Factory
Automation}, author={Bertelsmeier, Fabian and Trächtler, Ansgar}, year={2015}
}'
chicago: Bertelsmeier, Fabian, and Ansgar Trächtler. “Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics Based on Product-Intelligence.” In 20th
IEEE International Conference on Emerging Technologies and Factory Automation.
Luxembourg, 2015.
ieee: F. Bertelsmeier and A. Trächtler, “Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics based on Product-Intelligence,” in 20th
IEEE International Conference on Emerging Technologies and Factory Automation,
2015.
mla: Bertelsmeier, Fabian, and Ansgar Trächtler. “Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics Based on Product-Intelligence.” 20th
IEEE International Conference on Emerging Technologies and Factory Automation,
2015.
short: 'F. Bertelsmeier, A. Trächtler, in: 20th IEEE International Conference on
Emerging Technologies and Factory Automation, Luxembourg, 2015.'
date_created: 2021-08-09T06:42:20Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
place: Luxembourg
publication: 20th IEEE International Conference on Emerging Technologies and Factory
Automation
status: public
title: Decentralized Controller Reconfiguration Strategies for Hybrid System Dynamics
based on Product-Intelligence
type: conference
user_id: '24876'
year: '2015'
...