---
_id: '22396'
abstract:
- lang: eng
text: Additive manufacturing offers many technical and economical benefits. In order
to profit from these benefits, it is necessary to consider the manufacturing limits
and restrictions. This applies in particular to the geometrical accuracy. Therefore,
the achievable geometrical accuracy needs to be investigated, which enables the
determination of realistic tolerances. Thus, two different aims are considered.
The first aim is the determination of dimensional tolerances that can be stated
if additive manufacturing is used under normal workshop conditions. Within the
second aim, relevant process parameters and manufacturing influences will be optimized
in order to reduce dimensional deviations. To achieve both aims a method was developed
first. This method identifies relevant influential factors on the geometrical
accuracy for the processes Fused Deposition Modeling (FDM), Laser Sintering (LS)
and Laser Melting (LM). Factors were selected that are expected to affect the
geometrical accuracy mainly. The first investigations deal with measuring linear
dimensions on a designed test specimen and the derivation of achievable dimensional
tolerances. This paper will present both, the developed method and the first results
of the experimental investigations.
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Frederick
full_name: Knoop, Frederick
last_name: Knoop
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Nils
full_name: Funke, Nils
last_name: Funke
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lieneke T, Adam G, Leuders S, et al. Systematical determination of tolerances
for additive manufacturing by measuring linear dimensions. In: 26th Annual
International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:371-384.
doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions'
apa: Lieneke, T., Adam, G., Leuders, S., Knoop, F., Josupeit, S., Delfs, P., … Zimmer,
D. (2015). Systematical determination of tolerances for additive manufacturing
by measuring linear dimensions. In 26th Annual International Solid Freeform
Fabrication Symposium (Vol. 26, pp. 371–384). https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
bibtex: '@inproceedings{Lieneke_Adam_Leuders_Knoop_Josupeit_Delfs_Funke_Zimmer_2015,
title={Systematical determination of tolerances for additive manufacturing by
measuring linear dimensions}, volume={26}, DOI={https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions},
booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Lieneke,
Tobias and Adam, Guido and Leuders, Stefan and Knoop, Frederick and Josupeit,
Stefan and Delfs, Patrick and Funke, Nils and Zimmer, Detmar}, year={2015}, pages={371–384}
}'
chicago: Lieneke, Tobias, Guido Adam, Stefan Leuders, Frederick Knoop, Stefan Josupeit,
Patrick Delfs, Nils Funke, and Detmar Zimmer. “Systematical Determination of Tolerances
for Additive Manufacturing by Measuring Linear Dimensions.” In 26th Annual
International Solid Freeform Fabrication Symposium, 26:371–84, 2015. https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
ieee: T. Lieneke et al., “Systematical determination of tolerances for additive
manufacturing by measuring linear dimensions,” in 26th Annual International
Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 371–384.
mla: Lieneke, Tobias, et al. “Systematical Determination of Tolerances for Additive
Manufacturing by Measuring Linear Dimensions.” 26th Annual International Solid
Freeform Fabrication Symposium, vol. 26, 2015, pp. 371–84, doi:https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions.
short: 'T. Lieneke, G. Adam, S. Leuders, F. Knoop, S. Josupeit, P. Delfs, N. Funke,
D. Zimmer, in: 26th Annual International Solid Freeform Fabrication Symposium,
2015, pp. 371–384.'
date_created: 2021-06-15T11:09:22Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '150'
doi: https://www.researchgate.net/publication/316827402_Systematical_Determination_of_Tolerances_for_Additive_Manufacturing_by_Measuring_Linear_Dimensions
intvolume: ' 26'
language:
- iso: eng
page: 371-384
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: Systematical determination of tolerances for additive manufacturing by measuring
linear dimensions
type: conference
user_id: '38077'
volume: 26
year: '2015'
...
---
_id: '22397'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: Adam G. Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven
Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling.
Shaker Verlag; 2015.
apa: Adam, G. (2015). Systematische Erarbeitung von Konstruktionsregeln für die
additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition
Modeling. Shaker Verlag.
bibtex: '@book{Adam_2015, title={Systematische Erarbeitung von Konstruktionsregeln
für die additiven Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition
Modeling}, publisher={Shaker Verlag}, author={Adam, Guido}, year={2015} }'
chicago: Adam, Guido. Systematische Erarbeitung von Konstruktionsregeln Für Die
Additiven Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition
Modeling. Shaker Verlag, 2015.
ieee: G. Adam, Systematische Erarbeitung von Konstruktionsregeln für die additiven
Fertigungsverfahren Lasersintern, Laserschmelzen und Fused Deposition Modeling.
Shaker Verlag, 2015.
mla: Adam, Guido. Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven
Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling.
Shaker Verlag, 2015.
short: G. Adam, Systematische Erarbeitung von Konstruktionsregeln Für Die Additiven
Fertigungsverfahren Lasersintern, Laserschmelzen Und Fused Deposition Modeling,
Shaker Verlag, 2015.
date_created: 2021-06-15T11:09:23Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-8440-3474-5
publisher: Shaker Verlag
status: public
title: Systematische Erarbeitung von Konstruktionsregeln für die additiven Fertigungsverfahren
Lasersintern, Laserschmelzen und Fused Deposition Modeling
type: dissertation
user_id: '38077'
year: '2015'
...
---
_id: '22398'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: 'Adam G. On tolerances for additive manufacturing. In: Inside 3D Printing
Conference and Expo. ; 2015.'
apa: Adam, G. (2015). On tolerances for additive manufacturing. In Inside 3D
Printing Conference and Expo.
bibtex: '@inproceedings{Adam_2015, title={On tolerances for additive manufacturing},
booktitle={Inside 3D Printing Conference and Expo}, author={Adam, Guido}, year={2015}
}'
chicago: Adam, Guido. “On Tolerances for Additive Manufacturing.” In Inside 3D
Printing Conference and Expo, 2015.
ieee: G. Adam, “On tolerances for additive manufacturing,” in Inside 3D Printing
Conference and Expo, 2015.
mla: Adam, Guido. “On Tolerances for Additive Manufacturing.” Inside 3D Printing
Conference and Expo, 2015.
short: 'G. Adam, in: Inside 3D Printing Conference and Expo, 2015.'
date_created: 2021-06-15T11:09:25Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
publication: Inside 3D Printing Conference and Expo
status: public
title: On tolerances for additive manufacturing
type: conference
user_id: '38077'
year: '2015'
...
---
_id: '22399'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
citation:
ama: 'Lieneke T. Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren. In: Rapid Tech 2015. ; 2015.'
apa: Lieneke, T. (2015). Entwicklung einer Methode zur systematischen Erarbeitung
von Maßtoleranzen für additive Fertigungsverfahren. In Rapid Tech 2015.
bibtex: '@inproceedings{Lieneke_2015, title={Entwicklung einer Methode zur systematischen
Erarbeitung von Maßtoleranzen für additive Fertigungsverfahren}, booktitle={Rapid
Tech 2015}, author={Lieneke, Tobias}, year={2015} }'
chicago: Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung
von Maßtoleranzen Für Additive Fertigungsverfahren.” In Rapid Tech 2015,
2015.
ieee: T. Lieneke, “Entwicklung einer Methode zur systematischen Erarbeitung von
Maßtoleranzen für additive Fertigungsverfahren,” in Rapid Tech 2015, 2015.
mla: Lieneke, Tobias. “Entwicklung Einer Methode Zur Systematischen Erarbeitung
von Maßtoleranzen Für Additive Fertigungsverfahren.” Rapid Tech 2015, 2015.
short: 'T. Lieneke, in: Rapid Tech 2015, 2015.'
date_created: 2021-06-15T11:09:26Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
publication: Rapid Tech 2015
status: public
title: Entwicklung einer Methode zur systematischen Erarbeitung von Maßtoleranzen
für additive Fertigungsverfahren
type: conference
user_id: '38077'
year: '2015'
...
---
_id: '22400'
author:
- first_name: Tobias
full_name: Lieneke, Tobias
id: '13956'
last_name: Lieneke
citation:
ama: 'Lieneke T. Systematical determination of dimensional tolerances for additive
manufacturing . In: 26th Annual International Solid Freeform Fabrication Symposium.
Vol 26. ; 2015.'
apa: Lieneke, T. (2015). Systematical determination of dimensional tolerances for
additive manufacturing . In 26th Annual International Solid Freeform Fabrication
Symposium (Vol. 26).
bibtex: '@inproceedings{Lieneke_2015, title={Systematical determination of dimensional
tolerances for additive manufacturing }, volume={26}, booktitle={26th Annual International
Solid Freeform Fabrication Symposium}, author={Lieneke, Tobias}, year={2015} }'
chicago: Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances
for Additive Manufacturing .” In 26th Annual International Solid Freeform Fabrication
Symposium, Vol. 26, 2015.
ieee: T. Lieneke, “Systematical determination of dimensional tolerances for additive
manufacturing ,” in 26th Annual International Solid Freeform Fabrication Symposium,
2015, vol. 26.
mla: Lieneke, Tobias. “Systematical Determination of Dimensional Tolerances for
Additive Manufacturing .” 26th Annual International Solid Freeform Fabrication
Symposium, vol. 26, 2015.
short: 'T. Lieneke, in: 26th Annual International Solid Freeform Fabrication Symposium,
2015.'
date_created: 2021-06-15T11:09:27Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
intvolume: ' 26'
language:
- iso: eng
publication: 26th Annual International Solid Freeform Fabrication Symposium
status: public
title: 'Systematical determination of dimensional tolerances for additive manufacturing '
type: conference
user_id: '38077'
volume: 26
year: '2015'
...
---
_id: '22401'
author:
- first_name: Christian
full_name: Hölscher, Christian
last_name: Hölscher
- first_name: Malte
full_name: Strop, Malte
last_name: Strop
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Hölscher C, Strop M, Zimmer D. Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme.
Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe
. 2015;67(1-2):55-66.
apa: Hölscher, C., Strop, M., & Zimmer, D. (2015). Intelligente Betriebsstrategien
für Mehrmotorenantriebssysteme. Konstruktion - Zeitschrift Für Produktentwicklung
Und Ingenieur-Werkstoffe , 67(1–2), 55–66.
bibtex: '@article{Hölscher_Strop_Zimmer_2015, title={Intelligente Betriebsstrategien
für Mehrmotorenantriebssysteme}, volume={67}, number={1–2}, journal={Konstruktion
- Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe }, publisher={Springer-VDI-Verlag
}, author={Hölscher, Christian and Strop, Malte and Zimmer, Detmar}, year={2015},
pages={55–66} }'
chicago: 'Hölscher, Christian, Malte Strop, and Detmar Zimmer. “Intelligente Betriebsstrategien
Für Mehrmotorenantriebssysteme.” Konstruktion - Zeitschrift Für Produktentwicklung
Und Ingenieur-Werkstoffe 67, no. 1–2 (2015): 55–66.'
ieee: C. Hölscher, M. Strop, and D. Zimmer, “Intelligente Betriebsstrategien für
Mehrmotorenantriebssysteme,” Konstruktion - Zeitschrift für Produktentwicklung
und Ingenieur-Werkstoffe , vol. 67, no. 1–2, pp. 55–66, 2015.
mla: Hölscher, Christian, et al. “Intelligente Betriebsstrategien Für Mehrmotorenantriebssysteme.”
Konstruktion - Zeitschrift Für Produktentwicklung Und Ingenieur-Werkstoffe
, vol. 67, no. 1–2, Springer-VDI-Verlag , 2015, pp. 55–66.
short: C. Hölscher, M. Strop, D. Zimmer, Konstruktion - Zeitschrift Für Produktentwicklung
Und Ingenieur-Werkstoffe 67 (2015) 55–66.
date_created: 2021-06-15T11:09:28Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
intvolume: ' 67'
issue: 1-2
language:
- iso: eng
page: 55-66
publication: 'Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe '
publication_identifier:
isbn:
- 0373-3300
publisher: 'Springer-VDI-Verlag '
status: public
title: Intelligente Betriebsstrategien für Mehrmotorenantriebssysteme
type: journal_article
user_id: '38077'
volume: 67
year: '2015'
...
---
_id: '22402'
author:
- first_name: Ansgar
full_name: Wiehe, Ansgar
last_name: Wiehe
citation:
ama: Wiehe A. Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen. Der Andere Verlag; 2015.
apa: Wiehe, A. (2015). Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer
Bremsen. Der Andere Verlag.
bibtex: '@book{Wiehe_2015, title={Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer
Bremsen}, publisher={Der Andere Verlag}, author={Wiehe, Ansgar}, year={2015} }'
chicago: Wiehe, Ansgar. Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen. Der Andere Verlag, 2015.
ieee: A. Wiehe, Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer
Bremsen. Der Andere Verlag, 2015.
mla: Wiehe, Ansgar. Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen. Der Andere Verlag, 2015.
short: A. Wiehe, Ein Beitrag Zur Modellbasierten Entwicklung Magnetorheologischer
Bremsen, Der Andere Verlag, 2015.
date_created: 2021-06-15T11:09:29Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-86247-541-4
publisher: Der Andere Verlag
status: public
title: Ein Beitrag zur modellbasierten Entwicklung magnetorheologischer Bremsen
type: dissertation
user_id: '38077'
year: '2015'
...
---
_id: '22530'
applicant:
- Lenze Drives GmbH; Universität Paderborn
application_date: 2012-03-09
application_number: '12158900.6'
author:
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Karsten
full_name: Nolte, Karsten
last_name: Nolte
- first_name: Jürgen
full_name: Hütte, Jürgen
last_name: Hütte
citation:
ama: Zimmer D, Nolte K, Hütte J. Wellendichtsysteme. 2015.
apa: Zimmer, D., Nolte, K., & Hütte, J. (2015). Wellendichtsysteme.
bibtex: '@article{Zimmer_Nolte_Hütte_2015, title={Wellendichtsysteme}, author={Zimmer,
Detmar and Nolte, Karsten and Hütte, Jürgen}, year={2015} }'
chicago: Zimmer, Detmar, Karsten Nolte, and Jürgen Hütte. “Wellendichtsysteme,”
2015.
ieee: D. Zimmer, K. Nolte, and J. Hütte, “Wellendichtsysteme.” 2015.
mla: Zimmer, Detmar, et al. Wellendichtsysteme. 2015.
short: D. Zimmer, K. Nolte, J. Hütte, (2015).
date_created: 2021-07-05T13:33:56Z
date_updated: 2022-01-06T06:55:36Z
department:
- _id: '146'
ipc: F16J 15/00
ipn: EP 2 497 977 B1.
publication_date: 2015-05-06
status: public
title: Wellendichtsysteme
type: patent
user_id: '38077'
year: '2015'
...
---
_id: '23055'
author:
- first_name: Farisoroosh
full_name: Abrishamchian, Farisoroosh
last_name: Abrishamchian
- first_name: Felix
full_name: Oestersötebier, Felix
last_name: Oestersötebier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Abrishamchian F, Oestersötebier F, Trächtler A. Feature Model Approach For
Managing Variability of Dynamic Behavior Models in Mechatronic Systems. In: Proceedings
of the ASME 2015 International Mechanical Engineering Congress & Exposition.
Houston, Texas: ASME; 2015.'
apa: 'Abrishamchian, F., Oestersötebier, F., & Trächtler, A. (2015). Feature
Model Approach For Managing Variability of Dynamic Behavior Models in Mechatronic
Systems. In Proceedings of the ASME 2015 International Mechanical Engineering
Congress & Exposition. Houston, Texas: ASME.'
bibtex: '@inproceedings{Abrishamchian_Oestersötebier_Trächtler_2015, place={Houston,
Texas}, title={Feature Model Approach For Managing Variability of Dynamic Behavior
Models in Mechatronic Systems}, booktitle={Proceedings of the ASME 2015 International
Mechanical Engineering Congress & Exposition}, publisher={ASME}, author={Abrishamchian,
Farisoroosh and Oestersötebier, Felix and Trächtler, Ansgar}, year={2015} }'
chicago: 'Abrishamchian, Farisoroosh, Felix Oestersötebier, and Ansgar Trächtler.
“Feature Model Approach For Managing Variability of Dynamic Behavior Models in
Mechatronic Systems.” In Proceedings of the ASME 2015 International Mechanical
Engineering Congress & Exposition. Houston, Texas: ASME, 2015.'
ieee: F. Abrishamchian, F. Oestersötebier, and A. Trächtler, “Feature Model Approach
For Managing Variability of Dynamic Behavior Models in Mechatronic Systems,” in
Proceedings of the ASME 2015 International Mechanical Engineering Congress
& Exposition, 2015.
mla: Abrishamchian, Farisoroosh, et al. “Feature Model Approach For Managing Variability
of Dynamic Behavior Models in Mechatronic Systems.” Proceedings of the ASME
2015 International Mechanical Engineering Congress & Exposition, ASME,
2015.
short: 'F. Abrishamchian, F. Oestersötebier, A. Trächtler, in: Proceedings of the
ASME 2015 International Mechanical Engineering Congress & Exposition, ASME,
Houston, Texas, 2015.'
date_created: 2021-08-09T06:42:19Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
place: Houston, Texas
publication: Proceedings of the ASME 2015 International Mechanical Engineering Congress
& Exposition
publisher: ASME
status: public
title: Feature Model Approach For Managing Variability of Dynamic Behavior Models
in Mechatronic Systems
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23056'
author:
- first_name: Fabian
full_name: Bertelsmeier, Fabian
last_name: Bertelsmeier
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bertelsmeier F, Trächtler A. Decentralized Controller Reconfiguration Strategies
for Hybrid System Dynamics based on Product-Intelligence. In: 20th IEEE International
Conference on Emerging Technologies and Factory Automation. Luxembourg; 2015.'
apa: Bertelsmeier, F., & Trächtler, A. (2015). Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics based on Product-Intelligence. In 20th
IEEE International Conference on Emerging Technologies and Factory Automation.
Luxembourg.
bibtex: '@inproceedings{Bertelsmeier_Trächtler_2015, place={Luxembourg}, title={Decentralized
Controller Reconfiguration Strategies for Hybrid System Dynamics based on Product-Intelligence},
booktitle={20th IEEE International Conference on Emerging Technologies and Factory
Automation}, author={Bertelsmeier, Fabian and Trächtler, Ansgar}, year={2015}
}'
chicago: Bertelsmeier, Fabian, and Ansgar Trächtler. “Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics Based on Product-Intelligence.” In 20th
IEEE International Conference on Emerging Technologies and Factory Automation.
Luxembourg, 2015.
ieee: F. Bertelsmeier and A. Trächtler, “Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics based on Product-Intelligence,” in 20th
IEEE International Conference on Emerging Technologies and Factory Automation,
2015.
mla: Bertelsmeier, Fabian, and Ansgar Trächtler. “Decentralized Controller Reconfiguration
Strategies for Hybrid System Dynamics Based on Product-Intelligence.” 20th
IEEE International Conference on Emerging Technologies and Factory Automation,
2015.
short: 'F. Bertelsmeier, A. Trächtler, in: 20th IEEE International Conference on
Emerging Technologies and Factory Automation, Luxembourg, 2015.'
date_created: 2021-08-09T06:42:20Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
place: Luxembourg
publication: 20th IEEE International Conference on Emerging Technologies and Factory
Automation
status: public
title: Decentralized Controller Reconfiguration Strategies for Hybrid System Dynamics
based on Product-Intelligence
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23057'
author:
- first_name: Kareem
full_name: Abdelgawad, Kareem
last_name: Abdelgawad
- first_name: Bassem
full_name: Hassan, Bassem
last_name: Hassan
- first_name: Andreas
full_name: Kohlstedt, Andreas
last_name: Kohlstedt
- first_name: Jörg
full_name: Stöcklein, Jörg
last_name: Stöcklein
- first_name: Jan
full_name: Berssenbrügge, Jan
last_name: Berssenbrügge
- first_name: Michael
full_name: Grafe, Michael
last_name: Grafe
- first_name: Sandra
full_name: Gausemeier, Sandra
id: '17793'
last_name: Gausemeier
- first_name: Karl-Peter
full_name: Jäker, Karl-Peter
last_name: Jäker
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Abdelgawad K, Hassan B, Kohlstedt A, et al. Flexible Operation Workflow of
a Driving Simulation Center for ADAS Development. In: New Developments in Driving
Simulation Design and Experiments. Driving Simulation Conference; 2015.'
apa: Abdelgawad, K., Hassan, B., Kohlstedt, A., Stöcklein, J., Berssenbrügge, J.,
Grafe, M., … Trächtler, A. (2015). Flexible Operation Workflow of a Driving Simulation
Center for ADAS Development. In New Developments in Driving Simulation Design
and Experiments. Driving Simulation Conference.
bibtex: '@inproceedings{Abdelgawad_Hassan_Kohlstedt_Stöcklein_Berssenbrügge_Grafe_Gausemeier_Jäker_Trächtler_2015,
title={Flexible Operation Workflow of a Driving Simulation Center for ADAS Development},
booktitle={New Developments in Driving Simulation Design and Experiments}, publisher={Driving
Simulation Conference}, author={Abdelgawad, Kareem and Hassan, Bassem and Kohlstedt,
Andreas and Stöcklein, Jörg and Berssenbrügge, Jan and Grafe, Michael and Gausemeier,
Sandra and Jäker, Karl-Peter and Trächtler, Ansgar}, year={2015} }'
chicago: Abdelgawad, Kareem, Bassem Hassan, Andreas Kohlstedt, Jörg Stöcklein, Jan
Berssenbrügge, Michael Grafe, Sandra Gausemeier, Karl-Peter Jäker, and Ansgar
Trächtler. “Flexible Operation Workflow of a Driving Simulation Center for ADAS
Development.” In New Developments in Driving Simulation Design and Experiments.
Driving Simulation Conference, 2015.
ieee: K. Abdelgawad et al., “Flexible Operation Workflow of a Driving Simulation
Center for ADAS Development,” in New Developments in Driving Simulation Design
and Experiments, 2015.
mla: Abdelgawad, Kareem, et al. “Flexible Operation Workflow of a Driving Simulation
Center for ADAS Development.” New Developments in Driving Simulation Design
and Experiments, Driving Simulation Conference, 2015.
short: 'K. Abdelgawad, B. Hassan, A. Kohlstedt, J. Stöcklein, J. Berssenbrügge,
M. Grafe, S. Gausemeier, K.-P. Jäker, A. Trächtler, in: New Developments in Driving
Simulation Design and Experiments, Driving Simulation Conference, 2015.'
date_created: 2021-08-09T06:42:21Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
publication: New Developments in Driving Simulation Design and Experiments
publisher: Driving Simulation Conference
status: public
title: Flexible Operation Workflow of a Driving Simulation Center for ADAS Development
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23058'
author:
- first_name: Bassem
full_name: Hassan, Bassem
last_name: Hassan
- first_name: Jörg
full_name: Stöcklein, Jörg
last_name: Stöcklein
- first_name: Jan
full_name: Berssenbrügge, Jan
last_name: Berssenbrügge
citation:
ama: 'Hassan B, Stöcklein J, Berssenbrügge J. ARTiST - An Augmented Reality Testbed
for Intelligent Technical Systems. In: Shumaker R, Lackey S, eds. Virtual,
Augmented and Mixed Reality VAMR 2015 Held as Part of HCI International 2015.
LNCS 9179. Los Angeles, CA, USA: Springer International Publishing Switzerland;
2015:457-469.'
apa: 'Hassan, B., Stöcklein, J., & Berssenbrügge, J. (2015). ARTiST - An Augmented
Reality Testbed for Intelligent Technical Systems. In R. Shumaker & S. Lackey
(Eds.), Virtual, Augmented and Mixed Reality VAMR 2015 Held as Part of HCI
International 2015 (pp. 457–469). Los Angeles, CA, USA: Springer International
Publishing Switzerland.'
bibtex: '@inproceedings{Hassan_Stöcklein_Berssenbrügge_2015, place={Los Angeles,
CA, USA}, series={LNCS 9179}, title={ARTiST - An Augmented Reality Testbed for
Intelligent Technical Systems}, booktitle={Virtual, Augmented and Mixed Reality
VAMR 2015 Held as Part of HCI International 2015}, publisher={Springer International
Publishing Switzerland}, author={Hassan, Bassem and Stöcklein, Jörg and Berssenbrügge,
Jan}, editor={Shumaker, Randall and Lackey, StephanieEditors}, year={2015}, pages={457–469},
collection={LNCS 9179} }'
chicago: 'Hassan, Bassem, Jörg Stöcklein, and Jan Berssenbrügge. “ARTiST - An Augmented
Reality Testbed for Intelligent Technical Systems.” In Virtual, Augmented and
Mixed Reality VAMR 2015 Held as Part of HCI International 2015, edited by
Randall Shumaker and Stephanie Lackey, 457–69. LNCS 9179. Los Angeles, CA, USA:
Springer International Publishing Switzerland, 2015.'
ieee: B. Hassan, J. Stöcklein, and J. Berssenbrügge, “ARTiST - An Augmented Reality
Testbed for Intelligent Technical Systems,” in Virtual, Augmented and Mixed
Reality VAMR 2015 Held as Part of HCI International 2015, 2015, pp. 457–469.
mla: Hassan, Bassem, et al. “ARTiST - An Augmented Reality Testbed for Intelligent
Technical Systems.” Virtual, Augmented and Mixed Reality VAMR 2015 Held as
Part of HCI International 2015, edited by Randall Shumaker and Stephanie Lackey,
Springer International Publishing Switzerland, 2015, pp. 457–69.
short: 'B. Hassan, J. Stöcklein, J. Berssenbrügge, in: R. Shumaker, S. Lackey (Eds.),
Virtual, Augmented and Mixed Reality VAMR 2015 Held as Part of HCI International
2015, Springer International Publishing Switzerland, Los Angeles, CA, USA, 2015,
pp. 457–469.'
date_created: 2021-08-09T06:42:23Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
editor:
- first_name: Randall
full_name: Shumaker, Randall
last_name: Shumaker
- first_name: Stephanie
full_name: Lackey, Stephanie
last_name: Lackey
language:
- iso: eng
page: 457 - 469
place: Los Angeles, CA, USA
publication: Virtual, Augmented and Mixed Reality VAMR 2015 Held as Part of HCI International
2015
publisher: Springer International Publishing Switzerland
series_title: LNCS 9179
status: public
title: ARTiST - An Augmented Reality Testbed for Intelligent Technical Systems
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23059'
author:
- first_name: Jan
full_name: Berssenbrügge, Jan
last_name: Berssenbrügge
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Christoph
full_name: Schmidt, Christoph
last_name: Schmidt
citation:
ama: 'Berssenbrügge J, Trächtler A, Schmidt C. Visualization of Headlight Illumination
for the Virtual Prototyping of Light-Based Driver Assistance Systems. In: Proceedings
of the ASME 2015 International Design Engineering Technical Conferences &
Computers and Information in Engineering Conference. Boston, MA, USA; 2015.'
apa: Berssenbrügge, J., Trächtler, A., & Schmidt, C. (2015). Visualization of
Headlight Illumination for the Virtual Prototyping of Light-Based Driver Assistance
Systems. In Proceedings of the ASME 2015 International Design Engineering Technical
Conferences & Computers and Information in Engineering Conference. Boston,
MA, USA.
bibtex: '@inproceedings{Berssenbrügge_Trächtler_Schmidt_2015, place={Boston, MA,
USA}, title={Visualization of Headlight Illumination for the Virtual Prototyping
of Light-Based Driver Assistance Systems}, booktitle={Proceedings of the ASME
2015 International Design Engineering Technical Conferences & Computers and
Information in Engineering Conference}, author={Berssenbrügge, Jan and Trächtler,
Ansgar and Schmidt, Christoph}, year={2015} }'
chicago: Berssenbrügge, Jan, Ansgar Trächtler, and Christoph Schmidt. “Visualization
of Headlight Illumination for the Virtual Prototyping of Light-Based Driver Assistance
Systems.” In Proceedings of the ASME 2015 International Design Engineering
Technical Conferences & Computers and Information in Engineering Conference.
Boston, MA, USA, 2015.
ieee: J. Berssenbrügge, A. Trächtler, and C. Schmidt, “Visualization of Headlight
Illumination for the Virtual Prototyping of Light-Based Driver Assistance Systems,”
in Proceedings of the ASME 2015 International Design Engineering Technical
Conferences & Computers and Information in Engineering Conference, 2015.
mla: Berssenbrügge, Jan, et al. “Visualization of Headlight Illumination for the
Virtual Prototyping of Light-Based Driver Assistance Systems.” Proceedings
of the ASME 2015 International Design Engineering Technical Conferences &
Computers and Information in Engineering Conference, 2015.
short: 'J. Berssenbrügge, A. Trächtler, C. Schmidt, in: Proceedings of the ASME
2015 International Design Engineering Technical Conferences & Computers and
Information in Engineering Conference, Boston, MA, USA, 2015.'
date_created: 2021-08-09T06:42:24Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
place: Boston, MA, USA
publication: Proceedings of the ASME 2015 International Design Engineering Technical
Conferences & Computers and Information in Engineering Conference
status: public
title: Visualization of Headlight Illumination for the Virtual Prototyping of Light-Based
Driver Assistance Systems
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23060'
author:
- first_name: Martin
full_name: Krüger, Martin
last_name: Krüger
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Krüger M, Trächtler A. Parametrische Modellordnungsreduktion für hierarchische
selbstoptimierende Systeme. at-Automatisierungstechnik. 2015;63(8):633-645.
apa: Krüger, M., & Trächtler, A. (2015). Parametrische Modellordnungsreduktion
für hierarchische selbstoptimierende Systeme. At-Automatisierungstechnik,
63(8), 633–645.
bibtex: '@article{Krüger_Trächtler_2015, title={Parametrische Modellordnungsreduktion
für hierarchische selbstoptimierende Systeme}, volume={63}, number={8}, journal={at-Automatisierungstechnik},
author={Krüger, Martin and Trächtler, Ansgar}, year={2015}, pages={633–645} }'
chicago: 'Krüger, Martin, and Ansgar Trächtler. “Parametrische Modellordnungsreduktion
Für Hierarchische Selbstoptimierende Systeme.” At-Automatisierungstechnik
63, no. 8 (2015): 633–45.'
ieee: M. Krüger and A. Trächtler, “Parametrische Modellordnungsreduktion für hierarchische
selbstoptimierende Systeme,” at-Automatisierungstechnik, vol. 63, no. 8,
pp. 633–645, 2015.
mla: Krüger, Martin, and Ansgar Trächtler. “Parametrische Modellordnungsreduktion
Für Hierarchische Selbstoptimierende Systeme.” At-Automatisierungstechnik,
vol. 63, no. 8, 2015, pp. 633–45.
short: M. Krüger, A. Trächtler, At-Automatisierungstechnik 63 (2015) 633–645.
date_created: 2021-08-09T06:42:25Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
intvolume: ' 63'
issue: '8'
language:
- iso: eng
page: 633 - 645
publication: at-Automatisierungstechnik
status: public
title: Parametrische Modellordnungsreduktion für hierarchische selbstoptimierende
Systeme
type: journal_article
user_id: '24876'
volume: 63
year: '2015'
...
---
_id: '23062'
author:
- first_name: Fabian
full_name: Bertelsmeier, Fabian
last_name: Bertelsmeier
- first_name: Marc
full_name: Vathauer, Marc
last_name: Vathauer
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Karl-Ernst
full_name: Vathauer, Karl-Ernst
last_name: Vathauer
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bertelsmeier F, Vathauer M, Henke C, Vathauer K-E, Trächtler A. Produkt- und
lastabhängiges dezentrales Motormanagement für die Fördertechnik: Anforderungen,
Design und Applikation . In: Automation 2015. Automation 2015: Benefits
of Change - the Future of Automation. VDI-Verlag; 2015.'
apa: 'Bertelsmeier, F., Vathauer, M., Henke, C., Vathauer, K.-E., & Trächtler,
A. (2015). Produkt- und lastabhängiges dezentrales Motormanagement für die Fördertechnik:
Anforderungen, Design und Applikation . In Automation 2015. VDI-Verlag.'
bibtex: '@inproceedings{Bertelsmeier_Vathauer_Henke_Vathauer_Trächtler_2015, series={Automation
2015: Benefits of Change - the Future of Automation}, title={Produkt- und lastabhängiges
dezentrales Motormanagement für die Fördertechnik: Anforderungen, Design und Applikation
}, booktitle={Automation 2015}, publisher={VDI-Verlag}, author={Bertelsmeier,
Fabian and Vathauer, Marc and Henke, Christian and Vathauer, Karl-Ernst and Trächtler,
Ansgar}, year={2015}, collection={Automation 2015: Benefits of Change - the Future
of Automation} }'
chicago: 'Bertelsmeier, Fabian, Marc Vathauer, Christian Henke, Karl-Ernst Vathauer,
and Ansgar Trächtler. “Produkt- Und Lastabhängiges Dezentrales Motormanagement
Für Die Fördertechnik: Anforderungen, Design Und Applikation .” In Automation
2015. Automation 2015: Benefits of Change - the Future of Automation. VDI-Verlag,
2015.'
ieee: 'F. Bertelsmeier, M. Vathauer, C. Henke, K.-E. Vathauer, and A. Trächtler,
“Produkt- und lastabhängiges dezentrales Motormanagement für die Fördertechnik:
Anforderungen, Design und Applikation ,” in Automation 2015, 2015.'
mla: 'Bertelsmeier, Fabian, et al. “Produkt- Und Lastabhängiges Dezentrales Motormanagement
Für Die Fördertechnik: Anforderungen, Design Und Applikation .” Automation
2015, VDI-Verlag, 2015.'
short: 'F. Bertelsmeier, M. Vathauer, C. Henke, K.-E. Vathauer, A. Trächtler, in:
Automation 2015, VDI-Verlag, 2015.'
date_created: 2021-08-09T06:42:27Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: Automation 2015
publisher: VDI-Verlag
series_title: 'Automation 2015: Benefits of Change - the Future of Automation'
status: public
title: 'Produkt- und lastabhängiges dezentrales Motormanagement für die Fördertechnik:
Anforderungen, Design und Applikation '
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23063'
author:
- first_name: Arathi
full_name: Pai, Arathi
last_name: Pai
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
- first_name: Philipp
full_name: Krooß, Philipp
last_name: Krooß
- first_name: Isabel
full_name: Koke, Isabel
last_name: Koke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
citation:
ama: 'Pai A, Niendorf T, Krooß P, Koke I, Trächtler A, Schaper M. Modelling the
Constitutive Behaviour of Martensite and Austenite in Shape Memory Alloys Using
Closed-Form Analytical Continuous Equations. In: 7th ECCOMAS Thematic Conference
on Smart Structures and Materials - SMART. ; 2015.'
apa: Pai, A., Niendorf, T., Krooß, P., Koke, I., Trächtler, A., & Schaper, M.
(2015). Modelling the Constitutive Behaviour of Martensite and Austenite in Shape
Memory Alloys Using Closed-Form Analytical Continuous Equations. In 7th ECCOMAS
Thematic Conference on Smart Structures and Materials - SMART.
bibtex: '@inproceedings{Pai_Niendorf_Krooß_Koke_Trächtler_Schaper_2015, title={Modelling
the Constitutive Behaviour of Martensite and Austenite in Shape Memory Alloys
Using Closed-Form Analytical Continuous Equations}, booktitle={7th ECCOMAS Thematic
Conference on Smart Structures and Materials - SMART}, author={Pai, Arathi and
Niendorf, Thomas and Krooß, Philipp and Koke, Isabel and Trächtler, Ansgar and
Schaper, Mirko}, year={2015} }'
chicago: Pai, Arathi, Thomas Niendorf, Philipp Krooß, Isabel Koke, Ansgar Trächtler,
and Mirko Schaper. “Modelling the Constitutive Behaviour of Martensite and Austenite
in Shape Memory Alloys Using Closed-Form Analytical Continuous Equations.” In
7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART,
2015.
ieee: A. Pai, T. Niendorf, P. Krooß, I. Koke, A. Trächtler, and M. Schaper, “Modelling
the Constitutive Behaviour of Martensite and Austenite in Shape Memory Alloys
Using Closed-Form Analytical Continuous Equations,” in 7th ECCOMAS Thematic
Conference on Smart Structures and Materials - SMART, 2015.
mla: Pai, Arathi, et al. “Modelling the Constitutive Behaviour of Martensite and
Austenite in Shape Memory Alloys Using Closed-Form Analytical Continuous Equations.”
7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART,
2015.
short: 'A. Pai, T. Niendorf, P. Krooß, I. Koke, A. Trächtler, M. Schaper, in: 7th
ECCOMAS Thematic Conference on Smart Structures and Materials - SMART, 2015.'
date_created: 2021-08-09T06:42:29Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
publication: 7th ECCOMAS Thematic Conference on Smart Structures and Materials - SMART
status: public
title: Modelling the Constitutive Behaviour of Martensite and Austenite in Shape Memory
Alloys Using Closed-Form Analytical Continuous Equations
type: conference
user_id: '24876'
year: '2015'
...
---
_id: '23064'
author:
- first_name: Ulf-Hendrik
full_name: Damerow, Ulf-Hendrik
last_name: Damerow
- first_name: Michael
full_name: Borsig, Michael
last_name: Borsig
- first_name: Dmitri
full_name: Tabakajew, Dmitri
last_name: Tabakajew
- first_name: Waldemar
full_name: Schaermann, Waldemar
last_name: Schaermann
- first_name: Marc
full_name: Hesse, Marc
last_name: Hesse
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Thorsten
full_name: Jungeblut, Thorsten
last_name: Jungeblut
citation:
ama: Damerow U-H, Borsig M, Tabakajew D, et al. Intelligente Biegeverfahren. wt
Werkstattstechnik online. 2015;6-2015:427-432.
apa: Damerow, U.-H., Borsig, M., Tabakajew, D., Schaermann, W., Hesse, M., Homberg,
W., … Jungeblut, T. (2015). Intelligente Biegeverfahren. Wt Werkstattstechnik
Online, 6–2015, 427–432.
bibtex: '@article{Damerow_Borsig_Tabakajew_Schaermann_Hesse_Homberg_Trächtler_Jungeblut_2015,
title={Intelligente Biegeverfahren}, volume={6–2015}, journal={wt Werkstattstechnik
online}, author={Damerow, Ulf-Hendrik and Borsig, Michael and Tabakajew, Dmitri
and Schaermann, Waldemar and Hesse, Marc and Homberg, Werner and Trächtler, Ansgar
and Jungeblut, Thorsten}, year={2015}, pages={427–432} }'
chicago: 'Damerow, Ulf-Hendrik, Michael Borsig, Dmitri Tabakajew, Waldemar Schaermann,
Marc Hesse, Werner Homberg, Ansgar Trächtler, and Thorsten Jungeblut. “Intelligente
Biegeverfahren.” Wt Werkstattstechnik Online 6–2015 (2015): 427–32.'
ieee: U.-H. Damerow et al., “Intelligente Biegeverfahren,” wt Werkstattstechnik
online, vol. 6–2015, pp. 427–432, 2015.
mla: Damerow, Ulf-Hendrik, et al. “Intelligente Biegeverfahren.” Wt Werkstattstechnik
Online, vol. 6–2015, 2015, pp. 427–32.
short: U.-H. Damerow, M. Borsig, D. Tabakajew, W. Schaermann, M. Hesse, W. Homberg,
A. Trächtler, T. Jungeblut, Wt Werkstattstechnik Online 6–2015 (2015) 427–432.
date_created: 2021-08-09T06:42:30Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
- _id: '241'
language:
- iso: eng
page: 427-432
publication: wt Werkstattstechnik online
status: public
title: Intelligente Biegeverfahren
type: journal_article
user_id: '24876'
volume: 6-2015
year: '2015'
...
---
_id: '23065'
author:
- first_name: Kareem
full_name: Abdelgawad, Kareem
last_name: Abdelgawad
- first_name: Bassem
full_name: Hassan, Bassem
last_name: Hassan
- first_name: Jan
full_name: Berssenbrügge, Jan
last_name: Berssenbrügge
- first_name: Jörg
full_name: Stöcklein, Jörg
last_name: Stöcklein
- first_name: Michael
full_name: Grafe, Michael
last_name: Grafe
citation:
ama: 'Abdelgawad K, Hassan B, Berssenbrügge J, Stöcklein J, Grafe M. A Modular Architecture
of an Interactive Simulation and Training Environment for Advanced Driver Assistance
Systems. In: International Journal On Advances in Software. Vol 8. IARIA;
2015:247-261.'
apa: Abdelgawad, K., Hassan, B., Berssenbrügge, J., Stöcklein, J., & Grafe,
M. (2015). A Modular Architecture of an Interactive Simulation and Training Environment
for Advanced Driver Assistance Systems. In International Journal On Advances
in Software (Vol. 8, pp. 247–261). IARIA.
bibtex: '@inproceedings{Abdelgawad_Hassan_Berssenbrügge_Stöcklein_Grafe_2015, title={A
Modular Architecture of an Interactive Simulation and Training Environment for
Advanced Driver Assistance Systems}, volume={8}, booktitle={International Journal
On Advances in Software}, publisher={IARIA}, author={Abdelgawad, Kareem and Hassan,
Bassem and Berssenbrügge, Jan and Stöcklein, Jörg and Grafe, Michael}, year={2015},
pages={247–261} }'
chicago: Abdelgawad, Kareem, Bassem Hassan, Jan Berssenbrügge, Jörg Stöcklein, and
Michael Grafe. “A Modular Architecture of an Interactive Simulation and Training
Environment for Advanced Driver Assistance Systems.” In International Journal
On Advances in Software, 8:247–61. IARIA, 2015.
ieee: K. Abdelgawad, B. Hassan, J. Berssenbrügge, J. Stöcklein, and M. Grafe, “A
Modular Architecture of an Interactive Simulation and Training Environment for
Advanced Driver Assistance Systems,” in International Journal On Advances in
Software, 2015, vol. 8, pp. 247–261.
mla: Abdelgawad, Kareem, et al. “A Modular Architecture of an Interactive Simulation
and Training Environment for Advanced Driver Assistance Systems.” International
Journal On Advances in Software, vol. 8, IARIA, 2015, pp. 247–61.
short: 'K. Abdelgawad, B. Hassan, J. Berssenbrügge, J. Stöcklein, M. Grafe, in:
International Journal On Advances in Software, IARIA, 2015, pp. 247–261.'
date_created: 2021-08-09T06:42:31Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
intvolume: ' 8'
language:
- iso: eng
page: 247 - 261
publication: International Journal On Advances in Software
publisher: IARIA
status: public
title: A Modular Architecture of an Interactive Simulation and Training Environment
for Advanced Driver Assistance Systems
type: conference
user_id: '24876'
volume: 8
year: '2015'
...
---
_id: '23066'
author:
- first_name: Zeeshan
full_name: Shareef, Zeeshan
last_name: Shareef
- first_name: Viktor
full_name: Just, Viktor
last_name: Just
- first_name: Heinrich
full_name: Teichrieb, Heinrich
last_name: Teichrieb
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Shareef Z, Just V, Teichrieb H, Trächtler A. Design and Control of Cooperative
Ball Juggling Delta Robots without Visual Guidance. Robotica. 2015:1-17.
apa: Shareef, Z., Just, V., Teichrieb, H., & Trächtler, A. (2015). Design and
Control of Cooperative Ball Juggling Delta Robots without Visual Guidance. Robotica,
1–17.
bibtex: '@article{Shareef_Just_Teichrieb_Trächtler_2015, title={Design and Control
of Cooperative Ball Juggling Delta Robots without Visual Guidance}, journal={Robotica},
author={Shareef, Zeeshan and Just, Viktor and Teichrieb, Heinrich and Trächtler,
Ansgar}, year={2015}, pages={1–17} }'
chicago: Shareef, Zeeshan, Viktor Just, Heinrich Teichrieb, and Ansgar Trächtler.
“Design and Control of Cooperative Ball Juggling Delta Robots without Visual Guidance.”
Robotica, 2015, 1–17.
ieee: Z. Shareef, V. Just, H. Teichrieb, and A. Trächtler, “Design and Control of
Cooperative Ball Juggling Delta Robots without Visual Guidance,” Robotica,
pp. 1–17, 2015.
mla: Shareef, Zeeshan, et al. “Design and Control of Cooperative Ball Juggling Delta
Robots without Visual Guidance.” Robotica, 2015, pp. 1–17.
short: Z. Shareef, V. Just, H. Teichrieb, A. Trächtler, Robotica (2015) 1–17.
date_created: 2021-08-09T06:42:32Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
language:
- iso: eng
page: 1-17
publication: Robotica
status: public
title: Design and Control of Cooperative Ball Juggling Delta Robots without Visual
Guidance
type: journal_article
user_id: '24876'
year: '2015'
...
---
_id: '23068'
author:
- first_name: Claudius
full_name: Jähn, Claudius
last_name: Jähn
- first_name: Matthias
full_name: Fischer, Matthias
last_name: Fischer
- first_name: Maria
full_name: Gerges, Maria
last_name: Gerges
- first_name: Jan
full_name: Berssenbrügge, Jan
last_name: Berssenbrügge
citation:
ama: 'Jähn C, Fischer M, Gerges M, Berssenbrügge J. Automatische Ableitung geometrischer
Eigenschaften von Bauteilen aus dem 3-D-Polygonmodell. In: 12. Paderborner
Workshop Augmented & Virtual Reality in Der Produktentstehung. Vol 342.
Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2015:107-120.'
apa: Jähn, C., Fischer, M., Gerges, M., & Berssenbrügge, J. (2015). Automatische
Ableitung geometrischer Eigenschaften von Bauteilen aus dem 3-D-Polygonmodell.
In 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung
(Vol. 342, pp. 107–120). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
bibtex: '@inproceedings{Jähn_Fischer_Gerges_Berssenbrügge_2015, title={Automatische
Ableitung geometrischer Eigenschaften von Bauteilen aus dem 3-D-Polygonmodell},
volume={342}, booktitle={12. Paderborner Workshop Augmented & Virtual Reality
in der Produktentstehung}, publisher={Verlagsschriftenreihe des Heinz Nixdorf
Instituts, Paderborn}, author={Jähn, Claudius and Fischer, Matthias and Gerges,
Maria and Berssenbrügge, Jan}, year={2015}, pages={107–120} }'
chicago: Jähn, Claudius, Matthias Fischer, Maria Gerges, and Jan Berssenbrügge.
“Automatische Ableitung Geometrischer Eigenschaften von Bauteilen Aus Dem 3-D-Polygonmodell.”
In 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung,
342:107–20. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015.
ieee: C. Jähn, M. Fischer, M. Gerges, and J. Berssenbrügge, “Automatische Ableitung
geometrischer Eigenschaften von Bauteilen aus dem 3-D-Polygonmodell,” in 12.
Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung,
2015, vol. 342, pp. 107–120.
mla: Jähn, Claudius, et al. “Automatische Ableitung Geometrischer Eigenschaften
von Bauteilen Aus Dem 3-D-Polygonmodell.” 12. Paderborner Workshop Augmented
& Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 107–20.
short: 'C. Jähn, M. Fischer, M. Gerges, J. Berssenbrügge, in: 12. Paderborner Workshop
Augmented & Virtual Reality in Der Produktentstehung, Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 107–120.'
date_created: 2021-08-09T06:42:34Z
date_updated: 2022-01-06T06:55:45Z
department:
- _id: '153'
intvolume: ' 342'
language:
- iso: eng
page: 107-120
publication: 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Automatische Ableitung geometrischer Eigenschaften von Bauteilen aus dem 3-D-Polygonmodell
type: conference
user_id: '24876'
volume: 342
year: '2015'
...