---
_id: '9954'
abstract:
- lang: eng
text: To increase quality and reliability of copper wire bonds, self-optimization
is a promising technique. For the implementation of self-optimization for ultrasonic
heavy copper wire bonding machines, a model of stick-slip motion between tool
and wire and between wire and substrate during the bonding process is essential.
Investigations confirm that both of these contacts do indeed show stick-slip movement
in each period oscillation. In a first step, this paper shows the importance of
modeling the stick-slip effect by determining, monitoring and analyzing amplitudes
and phase angles of tool tip, wire and substrate experimentally during bonding
via laser measurements. In a second step, the paper presents a dynamic model which
has been parameterized using an iterative numerical parameter identification method.
This model includes Archard's wear approach in order to compute the lost volume
of tool tip due to wear over the entire process time. A validation of the model
by comparing measured and calculated amplitudes of tool tip and wire reveals high
model quality. Then it is then possible to calculate the lifetime of the tool
for different process parameters, i.e. values of normal force and ultrasonic voltage.
author:
- first_name: Andreas
full_name: Unger, Andreas
last_name: Unger
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Tobias
full_name: Meyer, Tobias
last_name: Meyer
- first_name: Paul
full_name: Eichwald, Paul
last_name: Eichwald
- first_name: Simon
full_name: Althoff, Simon
last_name: Althoff
- first_name: Florian
full_name: Eacock, Florian
last_name: Eacock
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
citation:
ama: 'Unger A, Sextro W, Meyer T, et al. Modeling of the Stick-Slip Effect in Heavy
Copper Wire Bonding to Determine and Reduce Tool Wear. In: 2015 17th Electronics
Packaging Technology Conference. ; 2015. doi:10.1109/EPTC.2015.7412375'
apa: Unger, A., Sextro, W., Meyer, T., Eichwald, P., Althoff, S., Eacock, F., &
Brökelmann, M. (2015). Modeling of the Stick-Slip Effect in Heavy Copper Wire
Bonding to Determine and Reduce Tool Wear. In 2015 17th Electronics Packaging
Technology Conference. https://doi.org/10.1109/EPTC.2015.7412375
bibtex: '@inproceedings{Unger_Sextro_Meyer_Eichwald_Althoff_Eacock_Brökelmann_2015,
title={Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine
and Reduce Tool Wear}, DOI={10.1109/EPTC.2015.7412375},
booktitle={2015 17th Electronics Packaging Technology Conference}, author={Unger,
Andreas and Sextro, Walter and Meyer, Tobias and Eichwald, Paul and Althoff, Simon
and Eacock, Florian and Brökelmann, Michael}, year={2015} }'
chicago: Unger, Andreas, Walter Sextro, Tobias Meyer, Paul Eichwald, Simon Althoff,
Florian Eacock, and Michael Brökelmann. “Modeling of the Stick-Slip Effect in
Heavy Copper Wire Bonding to Determine and Reduce Tool Wear.” In 2015 17th
Electronics Packaging Technology Conference, 2015. https://doi.org/10.1109/EPTC.2015.7412375.
ieee: A. Unger et al., “Modeling of the Stick-Slip Effect in Heavy Copper
Wire Bonding to Determine and Reduce Tool Wear,” in 2015 17th Electronics Packaging
Technology Conference, 2015.
mla: Unger, Andreas, et al. “Modeling of the Stick-Slip Effect in Heavy Copper Wire
Bonding to Determine and Reduce Tool Wear.” 2015 17th Electronics Packaging
Technology Conference, 2015, doi:10.1109/EPTC.2015.7412375.
short: 'A. Unger, W. Sextro, T. Meyer, P. Eichwald, S. Althoff, F. Eacock, M. Brökelmann,
in: 2015 17th Electronics Packaging Technology Conference, 2015.'
date_created: 2019-05-27T08:43:55Z
date_updated: 2020-05-07T05:33:52Z
department:
- _id: '151'
doi: 10.1109/EPTC.2015.7412375
language:
- iso: eng
project:
- _id: '92'
grant_number: 02 PQ2210
name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen
publication: 2015 17th Electronics Packaging Technology Conference
quality_controlled: '1'
status: public
title: Modeling of the Stick-Slip Effect in Heavy Copper Wire Bonding to Determine
and Reduce Tool Wear
type: conference
user_id: '210'
year: '2015'
...
---
_id: '15964'
author:
- first_name: Stefan
full_name: Leuders, Stefan
last_name: Leuders
- first_name: Malte
full_name: Vollmer, Malte
last_name: Vollmer
- first_name: Florian
full_name: Brenne, Florian
last_name: Brenne
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
citation:
ama: Leuders S, Vollmer M, Brenne F, Tröster T, Niendorf T. Fatigue Strength Prediction
for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting. Metallurgical
and Materials Transactions A. 2015:3816-3823. doi:10.1007/s11661-015-2864-x
apa: Leuders, S., Vollmer, M., Brenne, F., Tröster, T., & Niendorf, T. (2015).
Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective
Laser Melting. Metallurgical and Materials Transactions A, 3816–3823. https://doi.org/10.1007/s11661-015-2864-x
bibtex: '@article{Leuders_Vollmer_Brenne_Tröster_Niendorf_2015, title={Fatigue Strength
Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting},
DOI={10.1007/s11661-015-2864-x},
journal={Metallurgical and Materials Transactions A}, author={Leuders, Stefan
and Vollmer, Malte and Brenne, Florian and Tröster, Thomas and Niendorf, Thomas},
year={2015}, pages={3816–3823} }'
chicago: Leuders, Stefan, Malte Vollmer, Florian Brenne, Thomas Tröster, and Thomas
Niendorf. “Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured
by Selective Laser Melting.” Metallurgical and Materials Transactions A,
2015, 3816–23. https://doi.org/10.1007/s11661-015-2864-x.
ieee: S. Leuders, M. Vollmer, F. Brenne, T. Tröster, and T. Niendorf, “Fatigue Strength
Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting,”
Metallurgical and Materials Transactions A, pp. 3816–3823, 2015.
mla: Leuders, Stefan, et al. “Fatigue Strength Prediction for Titanium Alloy TiAl6V4
Manufactured by Selective Laser Melting.” Metallurgical and Materials Transactions
A, 2015, pp. 3816–23, doi:10.1007/s11661-015-2864-x.
short: S. Leuders, M. Vollmer, F. Brenne, T. Tröster, T. Niendorf, Metallurgical
and Materials Transactions A (2015) 3816–3823.
date_created: 2020-02-21T14:39:59Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1007/s11661-015-2864-x
language:
- iso: eng
page: 3816-3823
publication: Metallurgical and Materials Transactions A
publication_identifier:
issn:
- 1073-5623
- 1543-1940
publication_status: published
status: public
title: Fatigue Strength Prediction for Titanium Alloy TiAl6V4 Manufactured by Selective
Laser Melting
type: journal_article
user_id: '72008'
year: '2015'
...
---
_id: '16132'
author:
- first_name: Nathalie
full_name: Weiß Borkowski, Nathalie
last_name: Weiß Borkowski
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Holger
full_name: Block, Holger
last_name: Block
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Weiß Borkowski N, Marten T, Block H, Tröster T. Multi-axial Material Testing
at High Strain Rates in High Speed Cupping Tests. In: ; 2015.'
apa: Weiß Borkowski, N., Marten, T., Block, H., & Tröster, T. (2015). Multi-axial
Material Testing at High Strain Rates in High Speed Cupping Tests. Presented at
the 5th International Conference on Hot Sheet Metal Forming of High-Performance
Steel, CHS2 2015, Toronto, Canada.
bibtex: '@inproceedings{Weiß Borkowski_Marten_Block_Tröster_2015, title={Multi-axial
Material Testing at High Strain Rates in High Speed Cupping Tests}, author={Weiß
Borkowski, Nathalie and Marten, Thorsten and Block, Holger and Tröster, Thomas},
year={2015} }'
chicago: Weiß Borkowski, Nathalie, Thorsten Marten, Holger Block, and Thomas Tröster.
“Multi-Axial Material Testing at High Strain Rates in High Speed Cupping Tests,”
2015.
ieee: N. Weiß Borkowski, T. Marten, H. Block, and T. Tröster, “Multi-axial Material
Testing at High Strain Rates in High Speed Cupping Tests,” presented at the 5th
International Conference on Hot Sheet Metal Forming of High-Performance Steel,
CHS2 2015, Toronto, Canada, 2015.
mla: Weiß Borkowski, Nathalie, et al. Multi-Axial Material Testing at High Strain
Rates in High Speed Cupping Tests. 2015.
short: 'N. Weiß Borkowski, T. Marten, H. Block, T. Tröster, in: 2015.'
conference:
end_date: 2015-06-03
location: Toronto, Canada
name: 5th International Conference on Hot Sheet Metal Forming of High-Performance
Steel, CHS2 2015
start_date: 2015-05-31
date_created: 2020-02-27T15:28:10Z
date_updated: 2022-01-06T06:52:44Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Multi-axial Material Testing at High Strain Rates in High Speed Cupping Tests
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16135'
author:
- first_name: M.
full_name: Frantz, M.
last_name: Frantz
- first_name: C.
full_name: Lauter, C.
last_name: Lauter
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Frantz M, Lauter C, Wang Z, Tröster T. Bestimmung und Optimierung von Eigenspannungen
in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK). In:
Verlag Stahleisen GmbH; 2015:139-144.'
apa: 'Frantz, M., Lauter, C., Wang, Z., & Tröster, T. (2015). Bestimmung und
Optimierung von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff
(FVK) (pp. 139–144). Presented at the Tagung Werkstoffprüfung 2015, Bad Neuenahr:
Verlag Stahleisen GmbH.'
bibtex: '@inproceedings{Frantz_Lauter_Wang_Tröster_2015, title={Bestimmung und Optimierung
von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff
(FVK)}, publisher={Verlag Stahleisen GmbH}, author={Frantz, M. and Lauter, C.
and Wang, Z. and Tröster, Thomas}, year={2015}, pages={139–144} }'
chicago: Frantz, M., C. Lauter, Z. Wang, and Thomas Tröster. “Bestimmung und Optimierung
von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff
(FVK),” 139–44. Verlag Stahleisen GmbH, 2015.
ieee: M. Frantz, C. Lauter, Z. Wang, and T. Tröster, “Bestimmung und Optimierung
von Eigenspannungen in hybriden Werkstoffsystemen aus Metall und Faserverbundkunststoff
(FVK),” presented at the Tagung Werkstoffprüfung 2015, Bad Neuenahr, 2015, pp.
139–144.
mla: Frantz, M., et al. Bestimmung und Optimierung von Eigenspannungen in hybriden
Werkstoffsystemen aus Metall und Faserverbundkunststoff (FVK). Verlag Stahleisen
GmbH, 2015, pp. 139–44.
short: 'M. Frantz, C. Lauter, Z. Wang, T. Tröster, in: Verlag Stahleisen GmbH, 2015,
pp. 139–144.'
conference:
end_date: 2015-12-04
location: Bad Neuenahr
name: Tagung Werkstoffprüfung 2015
start_date: 2015-12-03
date_created: 2020-02-27T15:34:45Z
date_updated: 2022-01-06T06:52:44Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 139-144
publisher: Verlag Stahleisen GmbH
status: public
title: Bestimmung und Optimierung von Eigenspannungen in hybriden Werkstoffsystemen
aus Metall und Faserverbundkunststoff (FVK)
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16136'
author:
- first_name: C.
full_name: Reuter, C.
last_name: Reuter
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: C.
full_name: Lauter, C.
last_name: Lauter
citation:
ama: 'Reuter C, Tröster T, Lauter C. Kennwertermittlung an Faserverbundkunststoffen
für Crashsimulationen mit dem FE-Solver LS-Dyna. In: Verlag Stahleisen GmbH; 2015:127-132.'
apa: 'Reuter, C., Tröster, T., & Lauter, C. (2015). Kennwertermittlung an Faserverbundkunststoffen
für Crashsimulationen mit dem FE-Solver LS-Dyna (pp. 127–132). Presented at the
Tagung Werkstoffprüfung 2015, Tagung Werkstoffprüfung 2015, Bad Neuenahr: Verlag
Stahleisen GmbH.'
bibtex: '@inproceedings{Reuter_Tröster_Lauter_2015, title={Kennwertermittlung an
Faserverbundkunststoffen für Crashsimulationen mit dem FE-Solver LS-Dyna}, publisher={Verlag
Stahleisen GmbH}, author={Reuter, C. and Tröster, Thomas and Lauter, C.}, year={2015},
pages={127–132} }'
chicago: Reuter, C., Thomas Tröster, and C. Lauter. “Kennwertermittlung an Faserverbundkunststoffen
für Crashsimulationen mit dem FE-Solver LS-Dyna,” 127–32. Verlag Stahleisen GmbH,
2015.
ieee: C. Reuter, T. Tröster, and C. Lauter, “Kennwertermittlung an Faserverbundkunststoffen
für Crashsimulationen mit dem FE-Solver LS-Dyna,” presented at the Tagung Werkstoffprüfung
2015, Tagung Werkstoffprüfung 2015, Bad Neuenahr, 2015, pp. 127–132.
mla: Reuter, C., et al. Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen
mit dem FE-Solver LS-Dyna. Verlag Stahleisen GmbH, 2015, pp. 127–32.
short: 'C. Reuter, T. Tröster, C. Lauter, in: Verlag Stahleisen GmbH, 2015, pp.
127–132.'
conference:
end_date: 2015-12-04
location: Tagung Werkstoffprüfung 2015, Bad Neuenahr
name: Tagung Werkstoffprüfung 2015
start_date: 2015-12-03
date_created: 2020-02-27T15:36:25Z
date_updated: 2022-01-06T06:52:44Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: ger
page: 127-132
project:
- _id: '52'
name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publisher: Verlag Stahleisen GmbH
status: public
title: Kennwertermittlung an Faserverbundkunststoffen für Crashsimulationen mit dem
FE-Solver LS-Dyna
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16258'
author:
- first_name: W.
full_name: Reschetnik, W.
last_name: Reschetnik
- first_name: S.
full_name: Leuders, S.
last_name: Leuders
- first_name: A.
full_name: Riemer, A.
last_name: Riemer
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: H. A.
full_name: Richard, H. A.
last_name: Richard
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
citation:
ama: 'Reschetnik W, Leuders S, Riemer A, Tröster T, Richard HA, Niendorf T. Fatigue
life prediction for metals processed by Selective Laser Melting using finite element
analyses. In: ; 2015.'
apa: Reschetnik, W., Leuders, S., Riemer, A., Tröster, T., Richard, H. A., &
Niendorf, T. (2015). Fatigue life prediction for metals processed by Selective
Laser Melting using finite element analyses. Presented at the TMS Annual Meeting
& Exhibition, Orlando, Florida, USA.
bibtex: '@inproceedings{Reschetnik_Leuders_Riemer_Tröster_Richard_Niendorf_2015,
title={Fatigue life prediction for metals processed by Selective Laser Melting
using finite element analyses}, author={Reschetnik, W. and Leuders, S. and Riemer,
A. and Tröster, Thomas and Richard, H. A. and Niendorf, T.}, year={2015} }'
chicago: Reschetnik, W., S. Leuders, A. Riemer, Thomas Tröster, H. A. Richard, and
T. Niendorf. “Fatigue Life Prediction for Metals Processed by Selective Laser
Melting Using Finite Element Analyses,” 2015.
ieee: W. Reschetnik, S. Leuders, A. Riemer, T. Tröster, H. A. Richard, and T. Niendorf,
“Fatigue life prediction for metals processed by Selective Laser Melting using
finite element analyses,” presented at the TMS Annual Meeting & Exhibition,
Orlando, Florida, USA, 2015.
mla: Reschetnik, W., et al. Fatigue Life Prediction for Metals Processed by Selective
Laser Melting Using Finite Element Analyses. 2015.
short: 'W. Reschetnik, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, T. Niendorf,
in: 2015.'
conference:
end_date: 2015-05-19
location: Orlando, Florida, USA
name: TMS Annual Meeting & Exhibition
start_date: 2015-05-15
date_created: 2020-03-09T07:51:46Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Fatigue life prediction for metals processed by Selective Laser Melting using
finite element analyses
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16259'
author:
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: C.
full_name: Lauter, C.
last_name: Lauter
- first_name: B.
full_name: Sanitther, B.
last_name: Sanitther
- first_name: M.
full_name: Frantz, M.
last_name: Frantz
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wang Z, Lauter C, Sanitther B, Frantz M, Tröster T. Intrinsic Manufacturing
of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding.
In: ; 2015.'
apa: Wang, Z., Lauter, C., Sanitther, B., Frantz, M., & Tröster, T. (2015).
Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by
Resin Transfer Moulding. Presented at the 18th International Conference on Composite
Structures (ICCS18), Lisbon, Portugal.
bibtex: '@inproceedings{Wang_Lauter_Sanitther_Frantz_Tröster_2015, title={Intrinsic
Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer
Moulding}, author={Wang, Z. and Lauter, C. and Sanitther, B. and Frantz, M. and
Tröster, Thomas}, year={2015} }'
chicago: Wang, Z., C. Lauter, B. Sanitther, M. Frantz, and Thomas Tröster. “Intrinsic
Manufacturing of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer
Moulding,” 2015.
ieee: Z. Wang, C. Lauter, B. Sanitther, M. Frantz, and T. Tröster, “Intrinsic Manufacturing
of Metal-FRP-Hybrid Structural Automotive Components by Resin Transfer Moulding,”
presented at the 18th International Conference on Composite Structures (ICCS18),
Lisbon, Portugal, 2015.
mla: Wang, Z., et al. Intrinsic Manufacturing of Metal-FRP-Hybrid Structural
Automotive Components by Resin Transfer Moulding. 2015.
short: 'Z. Wang, C. Lauter, B. Sanitther, M. Frantz, T. Tröster, in: 2015.'
conference:
end_date: 2015-06-18
location: Lisbon, Portugal
name: 18th International Conference on Composite Structures (ICCS18)
start_date: 2015-06-15
date_created: 2020-03-09T07:54:48Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Intrinsic Manufacturing of Metal-FRP-Hybrid Structural Automotive Components
by Resin Transfer Moulding
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16260'
author:
- first_name: C.
full_name: Lauter, C.
last_name: Lauter
- first_name: Z.
full_name: Wang, Z.
last_name: Wang
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: R.
full_name: Brandis, R.
last_name: Brandis
- first_name: D.
full_name: Köchling, D.
last_name: Köchling
citation:
ama: 'Lauter C, Wang Z, Tröster T, Brandis R, Köchling D. Methodology for the Product
Engineering of Lightweight Structures in Multi-Material Design. In: ; 2015.'
apa: Lauter, C., Wang, Z., Tröster, T., Brandis, R., & Köchling, D. (2015).
Methodology for the Product Engineering of Lightweight Structures in Multi-Material
Design. Presented at the 18th International Conference on Composite Structures
(ICCS18), Lisbon, Portugal.
bibtex: '@inproceedings{Lauter_Wang_Tröster_Brandis_Köchling_2015, title={Methodology
for the Product Engineering of Lightweight Structures in Multi-Material Design},
author={Lauter, C. and Wang, Z. and Tröster, Thomas and Brandis, R. and Köchling,
D.}, year={2015} }'
chicago: Lauter, C., Z. Wang, Thomas Tröster, R. Brandis, and D. Köchling. “Methodology
for the Product Engineering of Lightweight Structures in Multi-Material Design,”
2015.
ieee: C. Lauter, Z. Wang, T. Tröster, R. Brandis, and D. Köchling, “Methodology
for the Product Engineering of Lightweight Structures in Multi-Material Design,”
presented at the 18th International Conference on Composite Structures (ICCS18),
Lisbon, Portugal, 2015.
mla: Lauter, C., et al. Methodology for the Product Engineering of Lightweight
Structures in Multi-Material Design. 2015.
short: 'C. Lauter, Z. Wang, T. Tröster, R. Brandis, D. Köchling, in: 2015.'
conference:
end_date: 2015-06-18
location: Lisbon, Portugal
name: 18th International Conference on Composite Structures (ICCS18)
start_date: 2015-06-15
date_created: 2020-03-09T07:56:52Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Methodology for the Product Engineering of Lightweight Structures in Multi-Material
Design
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16261'
author:
- first_name: S.
full_name: Leuders, S.
last_name: Leuders
- first_name: S.
full_name: Meiners, S.
last_name: Meiners
- first_name: A.
full_name: Taube, A.
last_name: Taube
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: T.
full_name: Niendorf, T.
last_name: Niendorf
citation:
ama: 'Leuders S, Meiners S, Taube A, Tröster T, Niendorf T. Fatigue Behaviour of
a Structural Component Manufactured by Selective Laser Melting and Investment
Casting. In: ; 2015.'
apa: Leuders, S., Meiners, S., Taube, A., Tröster, T., & Niendorf, T. (2015).
Fatigue Behaviour of a Structural Component Manufactured by Selective Laser Melting
and Investment Casting. Presented at the 13th World Conference on Titanium, San
Diego, USA.
bibtex: '@inproceedings{Leuders_Meiners_Taube_Tröster_Niendorf_2015, title={Fatigue
Behaviour of a Structural Component Manufactured by Selective Laser Melting and
Investment Casting}, author={Leuders, S. and Meiners, S. and Taube, A. and Tröster,
Thomas and Niendorf, T.}, year={2015} }'
chicago: Leuders, S., S. Meiners, A. Taube, Thomas Tröster, and T. Niendorf. “Fatigue
Behaviour of a Structural Component Manufactured by Selective Laser Melting and
Investment Casting,” 2015.
ieee: S. Leuders, S. Meiners, A. Taube, T. Tröster, and T. Niendorf, “Fatigue Behaviour
of a Structural Component Manufactured by Selective Laser Melting and Investment
Casting,” presented at the 13th World Conference on Titanium, San Diego, USA,
2015.
mla: Leuders, S., et al. Fatigue Behaviour of a Structural Component Manufactured
by Selective Laser Melting and Investment Casting. 2015.
short: 'S. Leuders, S. Meiners, A. Taube, T. Tröster, T. Niendorf, in: 2015.'
conference:
end_date: 2015-08-20
location: San Diego, USA
name: 13th World Conference on Titanium
start_date: 2015-08-16
date_created: 2020-03-09T07:59:03Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Fatigue Behaviour of a Structural Component Manufactured by Selective Laser
Melting and Investment Casting
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '16263'
author:
- first_name: Nils
full_name: Wingenbach, Nils
id: '13802'
last_name: Wingenbach
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Wingenbach N, Tröster T. Material follows form follows function. In: ; 2015.'
apa: Wingenbach, N., & Tröster, T. (2015). Material follows form follows function.
Presented at the Hybrid-Expo, Stuttgart.
bibtex: '@inproceedings{Wingenbach_Tröster_2015, title={Material follows form follows
function}, author={Wingenbach, Nils and Tröster, Thomas}, year={2015} }'
chicago: Wingenbach, Nils, and Thomas Tröster. “Material Follows Form Follows Function,”
2015.
ieee: N. Wingenbach and T. Tröster, “Material follows form follows function,” presented
at the Hybrid-Expo, Stuttgart, 2015.
mla: Wingenbach, Nils, and Thomas Tröster. Material Follows Form Follows Function.
2015.
short: 'N. Wingenbach, T. Tröster, in: 2015.'
conference:
end_date: 2015-09-24
location: Stuttgart
name: Hybrid-Expo
start_date: 2015-09-22
date_created: 2020-03-09T08:37:13Z
date_updated: 2022-01-06T06:52:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Material follows form follows function
type: conference
user_id: '72008'
year: '2015'
...
---
_id: '13165'
author:
- first_name: G.
full_name: Sonnenrein, G.
last_name: Sonnenrein
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: A.
full_name: Elsner, A.
last_name: Elsner
- first_name: K.
full_name: Fieback, K.
last_name: Fieback
- first_name: A.
full_name: Morbach, A.
last_name: Morbach
- first_name: A.
full_name: Paul, A.
last_name: Paul
- first_name: J.
full_name: Vrabec, J.
last_name: Vrabec
citation:
ama: 'Sonnenrein G, Baumhögger E, Elsner A, et al. Copolymer-bound phase change
materials for household refrigerating appliances: experimental investigation of
power consumption, temperature distribution and demand side management potential.
International Journal of Refrigeration. 2015:166-173. doi:10.1016/j.ijrefrig.2015.06.030'
apa: 'Sonnenrein, G., Baumhögger, E., Elsner, A., Fieback, K., Morbach, A., Paul,
A., & Vrabec, J. (2015). Copolymer-bound phase change materials for household
refrigerating appliances: experimental investigation of power consumption, temperature
distribution and demand side management potential. International Journal of
Refrigeration, 166–173. https://doi.org/10.1016/j.ijrefrig.2015.06.030'
bibtex: '@article{Sonnenrein_Baumhögger_Elsner_Fieback_Morbach_Paul_Vrabec_2015,
title={Copolymer-bound phase change materials for household refrigerating appliances:
experimental investigation of power consumption, temperature distribution and
demand side management potential}, DOI={10.1016/j.ijrefrig.2015.06.030},
journal={International Journal of Refrigeration}, author={Sonnenrein, G. and Baumhögger,
Elmar and Elsner, A. and Fieback, K. and Morbach, A. and Paul, A. and Vrabec,
J.}, year={2015}, pages={166–173} }'
chicago: 'Sonnenrein, G., Elmar Baumhögger, A. Elsner, K. Fieback, A. Morbach, A.
Paul, and J. Vrabec. “Copolymer-Bound Phase Change Materials for Household Refrigerating
Appliances: Experimental Investigation of Power Consumption, Temperature Distribution
and Demand Side Management Potential.” International Journal of Refrigeration,
2015, 166–73. https://doi.org/10.1016/j.ijrefrig.2015.06.030.'
ieee: 'G. Sonnenrein et al., “Copolymer-bound phase change materials for
household refrigerating appliances: experimental investigation of power consumption,
temperature distribution and demand side management potential,” International
Journal of Refrigeration, pp. 166–173, 2015.'
mla: 'Sonnenrein, G., et al. “Copolymer-Bound Phase Change Materials for Household
Refrigerating Appliances: Experimental Investigation of Power Consumption, Temperature
Distribution and Demand Side Management Potential.” International Journal of
Refrigeration, 2015, pp. 166–73, doi:10.1016/j.ijrefrig.2015.06.030.'
short: G. Sonnenrein, E. Baumhögger, A. Elsner, K. Fieback, A. Morbach, A. Paul,
J. Vrabec, International Journal of Refrigeration (2015) 166–173.
date_created: 2019-09-09T15:18:24Z
date_updated: 2022-01-06T06:51:29Z
department:
- _id: '155'
doi: 10.1016/j.ijrefrig.2015.06.030
language:
- iso: eng
page: 166-173
publication: International Journal of Refrigeration
publication_identifier:
issn:
- 0140-7007
publication_status: published
status: public
title: 'Copolymer-bound phase change materials for household refrigerating appliances:
experimental investigation of power consumption, temperature distribution and demand
side management potential'
type: journal_article
user_id: '15164'
year: '2015'
...
---
_id: '13166'
article_number: '054903'
author:
- first_name: Frithjof H.
full_name: Dubberke, Frithjof H.
last_name: Dubberke
- first_name: Elmar
full_name: Baumhögger, Elmar
id: '15164'
last_name: Baumhögger
- first_name: Jadran
full_name: Vrabec, Jadran
last_name: Vrabec
citation:
ama: Dubberke FH, Baumhögger E, Vrabec J. Burst design and signal processing for
the speed of sound measurement of fluids with the pulse-echo technique. Review
of Scientific Instruments. 2015. doi:10.1063/1.4921478
apa: Dubberke, F. H., Baumhögger, E., & Vrabec, J. (2015). Burst design and
signal processing for the speed of sound measurement of fluids with the pulse-echo
technique. Review of Scientific Instruments. https://doi.org/10.1063/1.4921478
bibtex: '@article{Dubberke_Baumhögger_Vrabec_2015, title={Burst design and signal
processing for the speed of sound measurement of fluids with the pulse-echo technique},
DOI={10.1063/1.4921478}, number={054903},
journal={Review of Scientific Instruments}, author={Dubberke, Frithjof H. and
Baumhögger, Elmar and Vrabec, Jadran}, year={2015} }'
chicago: Dubberke, Frithjof H., Elmar Baumhögger, and Jadran Vrabec. “Burst Design
and Signal Processing for the Speed of Sound Measurement of Fluids with the Pulse-Echo
Technique.” Review of Scientific Instruments, 2015. https://doi.org/10.1063/1.4921478.
ieee: F. H. Dubberke, E. Baumhögger, and J. Vrabec, “Burst design and signal processing
for the speed of sound measurement of fluids with the pulse-echo technique,” Review
of Scientific Instruments, 2015.
mla: Dubberke, Frithjof H., et al. “Burst Design and Signal Processing for the Speed
of Sound Measurement of Fluids with the Pulse-Echo Technique.” Review of Scientific
Instruments, 054903, 2015, doi:10.1063/1.4921478.
short: F.H. Dubberke, E. Baumhögger, J. Vrabec, Review of Scientific Instruments
(2015).
date_created: 2019-09-09T15:19:16Z
date_updated: 2022-01-06T06:51:29Z
department:
- _id: '155'
doi: 10.1063/1.4921478
language:
- iso: eng
publication: Review of Scientific Instruments
publication_identifier:
issn:
- 0034-6748
- 1089-7623
publication_status: published
status: public
title: Burst design and signal processing for the speed of sound measurement of fluids
with the pulse-echo technique
type: journal_article
user_id: '15164'
year: '2015'
...
---
_id: '34441'
abstract:
- lang: eng
text: The state of the art industrial manufacturing process to produce shafts as
counter surfaces for radial shaft seal rings is plunge grinding. This process
consists of three major steps. The blank is turned to a slight diameter-oversize
followed by the heat treatment and the hard-finishing by plunge grinding. The
geometric surface structures of the resulting shafts in general exhibit a stochastic
distribution. These surface characteristics contribute to a reliable and stable
sealing functionality. And the surface and subsurface hardness generally leads
to a higher wear resistance of the shaft. Motivated by economic benefits and in
order to achieve a compact production process for at least ten years, turning
is investigated as an alternative manufacturing process. However due to the resulting
lead structure on the shaft surface and the associated risk of leakage it has
not become prevalent yet. In this paper turned shafts of the metastable austenitic
steel AISI 347 (1.4550, X6CrNiNb1810) are investigated as alternative material
for counter surfaces of radial shaft seal rings and compared to turned shafts
of carburized AISI 5115 (1.7131, 16MnCr5). In addition to surfaces dry turned
at room-temperature, cryogenic turned AISI 347 counter surfaces are analyzed.
By applying cryogenic cooling, the formation of deformation-induced α′-martensite
in the surface layer is possible during the turning process. Endurance tests in
radial shaft seal ring test rigs are performed and complemented with detailed
investigations of microstructure, micro-hardness and surface topography. The results
are compared to results of state of the art ground AISI 5115 shafts.
author:
- first_name: D.
full_name: Frölich, D.
last_name: Frölich
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: B.
full_name: Sauer, B.
last_name: Sauer
- first_name: P.
full_name: Mayer, P.
last_name: Mayer
- first_name: B.
full_name: Kirsch, B.
last_name: Kirsch
- first_name: J.C.
full_name: Aurich, J.C.
last_name: Aurich
- first_name: R.
full_name: Skorupski, R.
last_name: Skorupski
- first_name: M.
full_name: Smaga, M.
last_name: Smaga
- first_name: T.
full_name: Beck, T.
last_name: Beck
- first_name: D.
full_name: Eifler, D.
last_name: Eifler
citation:
ama: Frölich D, Magyar B, Sauer B, et al. Investigation of wear resistance of dry
and cryogenic turned metastable austenitic steel shafts and dry turned and ground
carburized steel shafts in the radial shaft seal ring system. Wear. 2015;328-329:123-131.
doi:https://doi.org/10.1016/j.wear.2015.02.004
apa: Frölich, D., Magyar, B., Sauer, B., Mayer, P., Kirsch, B., Aurich, J. C., Skorupski,
R., Smaga, M., Beck, T., & Eifler, D. (2015). Investigation of wear resistance
of dry and cryogenic turned metastable austenitic steel shafts and dry turned
and ground carburized steel shafts in the radial shaft seal ring system. Wear,
328–329, 123–131. https://doi.org/10.1016/j.wear.2015.02.004
bibtex: '@article{Frölich_Magyar_Sauer_Mayer_Kirsch_Aurich_Skorupski_Smaga_Beck_Eifler_2015,
title={Investigation of wear resistance of dry and cryogenic turned metastable
austenitic steel shafts and dry turned and ground carburized steel shafts in the
radial shaft seal ring system}, volume={328–329}, DOI={https://doi.org/10.1016/j.wear.2015.02.004},
journal={Wear}, author={Frölich, D. and Magyar, Balázs and Sauer, B. and Mayer,
P. and Kirsch, B. and Aurich, J.C. and Skorupski, R. and Smaga, M. and Beck, T.
and Eifler, D.}, year={2015}, pages={123–131} }'
chicago: 'Frölich, D., Balázs Magyar, B. Sauer, P. Mayer, B. Kirsch, J.C. Aurich,
R. Skorupski, M. Smaga, T. Beck, and D. Eifler. “Investigation of Wear Resistance
of Dry and Cryogenic Turned Metastable Austenitic Steel Shafts and Dry Turned
and Ground Carburized Steel Shafts in the Radial Shaft Seal Ring System.” Wear
328–329 (2015): 123–31. https://doi.org/10.1016/j.wear.2015.02.004.'
ieee: 'D. Frölich et al., “Investigation of wear resistance of dry and cryogenic
turned metastable austenitic steel shafts and dry turned and ground carburized
steel shafts in the radial shaft seal ring system,” Wear, vol. 328–329,
pp. 123–131, 2015, doi: https://doi.org/10.1016/j.wear.2015.02.004.'
mla: Frölich, D., et al. “Investigation of Wear Resistance of Dry and Cryogenic
Turned Metastable Austenitic Steel Shafts and Dry Turned and Ground Carburized
Steel Shafts in the Radial Shaft Seal Ring System.” Wear, vol. 328–329,
2015, pp. 123–31, doi:https://doi.org/10.1016/j.wear.2015.02.004.
short: D. Frölich, B. Magyar, B. Sauer, P. Mayer, B. Kirsch, J.C. Aurich, R. Skorupski,
M. Smaga, T. Beck, D. Eifler, Wear 328–329 (2015) 123–131.
date_created: 2022-12-15T10:17:23Z
date_updated: 2022-12-15T10:18:54Z
department:
- _id: '146'
doi: https://doi.org/10.1016/j.wear.2015.02.004
extern: '1'
keyword:
- Radial shaft seal ring
- Shaft surface
- Cryogenic turning
- Metastable austenitic steel
- Deformation-induced martensite formation
language:
- iso: eng
page: 123-131
publication: Wear
publication_identifier:
issn:
- 0043-1648
status: public
title: Investigation of wear resistance of dry and cryogenic turned metastable austenitic
steel shafts and dry turned and ground carburized steel shafts in the radial shaft
seal ring system
type: journal_article
user_id: '38077'
volume: 328-329
year: '2015'
...
---
_id: '35234'
author:
- first_name: M
full_name: Oehler, M
last_name: Oehler
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: B
full_name: Sauer, B
last_name: Sauer
citation:
ama: 'Oehler M, Magyar B, Sauer B. Worm Gear Drives with High Efficiency. In: VDI-Berichte
2255. VDI Verlag GmbH; 2015:937-948.'
apa: Oehler, M., Magyar, B., & Sauer, B. (2015). Worm Gear Drives with High
Efficiency. VDI-Berichte 2255, 937–948.
bibtex: '@inproceedings{Oehler_Magyar_Sauer_2015, place={Düsseldorf}, title={Worm
Gear Drives with High Efficiency}, booktitle={VDI-Berichte 2255}, publisher={VDI
Verlag GmbH}, author={Oehler, M and Magyar, Balázs and Sauer, B}, year={2015},
pages={937–948} }'
chicago: 'Oehler, M, Balázs Magyar, and B Sauer. “Worm Gear Drives with High Efficiency.”
In VDI-Berichte 2255, 937–48. Düsseldorf: VDI Verlag GmbH, 2015.'
ieee: M. Oehler, B. Magyar, and B. Sauer, “Worm Gear Drives with High Efficiency,”
in VDI-Berichte 2255, 2015, pp. 937–948.
mla: Oehler, M., et al. “Worm Gear Drives with High Efficiency.” VDI-Berichte
2255, VDI Verlag GmbH, 2015, pp. 937–48.
short: 'M. Oehler, B. Magyar, B. Sauer, in: VDI-Berichte 2255, VDI Verlag GmbH,
Düsseldorf, 2015, pp. 937–948.'
conference:
name: 'VDI International Conference on Gears 2015 '
date_created: 2023-01-04T14:57:12Z
date_updated: 2023-01-04T14:57:17Z
department:
- _id: '146'
extern: '1'
language:
- iso: eng
page: 937-948
place: Düsseldorf
publication: VDI-Berichte 2255
publication_identifier:
isbn:
- 978-3-18-092255-3
publisher: VDI Verlag GmbH
status: public
title: Worm Gear Drives with High Efficiency
type: conference
user_id: '38077'
year: '2015'
...
---
_id: '35235'
author:
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: B
full_name: Sauer, B
last_name: Sauer
citation:
ama: Magyar B, Sauer B. Calculation of the efficiency of worm gear drives. Power
Transmission Engineering. 2015;9(4):52-56.
apa: Magyar, B., & Sauer, B. (2015). Calculation of the efficiency of worm gear
drives. Power Transmission Engineering, 9(4), 52–56.
bibtex: '@article{Magyar_Sauer_2015, title={Calculation of the efficiency of worm
gear drives}, volume={9}, number={4}, journal={Power Transmission Engineering},
author={Magyar, Balázs and Sauer, B}, year={2015}, pages={52–56} }'
chicago: 'Magyar, Balázs, and B Sauer. “Calculation of the Efficiency of Worm Gear
Drives.” Power Transmission Engineering 9, no. 4 (2015): 52–56.'
ieee: B. Magyar and B. Sauer, “Calculation of the efficiency of worm gear drives,”
Power Transmission Engineering, vol. 9, no. 4, pp. 52–56, 2015.
mla: Magyar, Balázs, and B. Sauer. “Calculation of the Efficiency of Worm Gear Drives.”
Power Transmission Engineering, vol. 9, no. 4, 2015, pp. 52–56.
short: B. Magyar, B. Sauer, Power Transmission Engineering 9 (2015) 52–56.
date_created: 2023-01-04T14:59:20Z
date_updated: 2023-01-04T14:59:25Z
department:
- _id: '146'
intvolume: ' 9'
issue: '4'
language:
- iso: eng
page: 52-56
publication: Power Transmission Engineering
publication_identifier:
issn:
- 2331-2483
status: public
title: Calculation of the efficiency of worm gear drives
type: journal_article
user_id: '38077'
volume: 9
year: '2015'
...
---
_id: '22491'
application_date: 09.03.2012
application_number: '12158900.6'
author:
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Karsten
full_name: Nolte, Karsten
last_name: Nolte
- first_name: Jürgen
full_name: Hütte, Jürgen
last_name: Hütte
citation:
ama: Zimmer D, Nolte K, Hütte J. Wellendichtsysteme. Published online 2015.
apa: Zimmer, D., Nolte, K., & Hütte, J. (2015). Wellendichtsysteme.
bibtex: '@article{Zimmer_Nolte_Hütte_2015, title={Wellendichtsysteme}, author={Zimmer,
Detmar and Nolte, Karsten and Hütte, Jürgen}, year={2015} }'
chicago: Zimmer, Detmar, Karsten Nolte, and Jürgen Hütte. “Wellendichtsysteme,”
2015.
ieee: D. Zimmer, K. Nolte, and J. Hütte, “Wellendichtsysteme.” 2015.
mla: Zimmer, Detmar, et al. Wellendichtsysteme. 2015.
short: D. Zimmer, K. Nolte, J. Hütte, (2015).
date_created: 2021-06-21T12:47:02Z
date_updated: 2023-01-04T14:59:47Z
department:
- _id: '9'
- _id: '146'
ipc: F16J 15/00, F16J 15/16, F16J 15/32
ipn: EP 2 497 977 B1
publication_date: 06.05.2015
status: public
title: Wellendichtsysteme
type: patent
user_id: '38077'
year: '2015'
...
---
_id: '23650'
author:
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Christian-Friedrich
full_name: Lindemann, Christian-Friedrich
id: '2930'
last_name: Lindemann
- first_name: Gereon
full_name: Deppe, Gereon
last_name: Deppe
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
citation:
ama: 'Pottebaum J, Lindemann C-F, Deppe G, Koch R. Additive Manufacturing for Future
Repair and Maintenance for the Aerospace Industry. In: Aviation in Europe -
Innovating for Growth, Proceedings of the Sventh European Aeronautics Days.
; 2015:547-557.'
apa: Pottebaum, J., Lindemann, C.-F., Deppe, G., & Koch, R. (2015). Additive
Manufacturing for Future Repair and Maintenance for the Aerospace Industry. Aviation
in Europe - Innovating for Growth, Proceedings of the Sventh European Aeronautics
Days, 547–557.
bibtex: '@inproceedings{Pottebaum_Lindemann_Deppe_Koch_2015, title={Additive Manufacturing
for Future Repair and Maintenance for the Aerospace Industry}, booktitle={Aviation
in Europe - Innovating for Growth, Proceedings of the Sventh European Aeronautics
Days}, author={Pottebaum, Jens and Lindemann, Christian-Friedrich and Deppe, Gereon
and Koch, Rainer}, year={2015}, pages={547–557} }'
chicago: Pottebaum, Jens, Christian-Friedrich Lindemann, Gereon Deppe, and Rainer
Koch. “Additive Manufacturing for Future Repair and Maintenance for the Aerospace
Industry.” In Aviation in Europe - Innovating for Growth, Proceedings of the
Sventh European Aeronautics Days, 547–57, 2015.
ieee: J. Pottebaum, C.-F. Lindemann, G. Deppe, and R. Koch, “Additive Manufacturing
for Future Repair and Maintenance for the Aerospace Industry,” in Aviation
in Europe - Innovating for Growth, Proceedings of the Sventh European Aeronautics
Days, 2015, pp. 547–557.
mla: Pottebaum, Jens, et al. “Additive Manufacturing for Future Repair and Maintenance
for the Aerospace Industry.” Aviation in Europe - Innovating for Growth, Proceedings
of the Sventh European Aeronautics Days, 2015, pp. 547–57.
short: 'J. Pottebaum, C.-F. Lindemann, G. Deppe, R. Koch, in: Aviation in Europe
- Innovating for Growth, Proceedings of the Sventh European Aeronautics Days,
2015, pp. 547–557.'
conference:
end_date: 2015-10-22
start_date: 2015-10-20
date_created: 2021-09-01T11:16:09Z
date_updated: 2023-11-16T09:30:37Z
department:
- _id: '152'
language:
- iso: eng
page: 547-557
publication: Aviation in Europe - Innovating for Growth, Proceedings of the Sventh
European Aeronautics Days
quality_controlled: '1'
status: public
title: Additive Manufacturing for Future Repair and Maintenance for the Aerospace
Industry
type: conference
user_id: '405'
year: '2015'
...
---
_id: '23067'
author:
- first_name: Zeeshan
full_name: Shareef, Zeeshan
last_name: Shareef
citation:
ama: Shareef Z. Path Planning and Trajectory Optimization of Delta Parallel Robot.
Vol 345. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2015.
apa: Shareef, Z. (2015). Path Planning and Trajectory Optimization of Delta Parallel
Robot (Vol. 345). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.
bibtex: '@book{Shareef_2015, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn}, title={Path Planning and Trajectory Optimization of Delta Parallel
Robot}, volume={345}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts,
Paderborn}, author={Shareef, Zeeshan}, year={2015}, collection={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn} }'
chicago: Shareef, Zeeshan. Path Planning and Trajectory Optimization of Delta
Parallel Robot. Vol. 345. Verlagsschriftenreihe Des Heinz Nixdorf Instituts,
Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015.
ieee: Z. Shareef, Path Planning and Trajectory Optimization of Delta Parallel
Robot, vol. 345. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn,
2015.
mla: Shareef, Zeeshan. Path Planning and Trajectory Optimization of Delta Parallel
Robot. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015.
short: Z. Shareef, Path Planning and Trajectory Optimization of Delta Parallel Robot,
Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015.
date_created: 2021-08-09T06:42:33Z
date_updated: 2024-07-12T12:00:08Z
department:
- _id: '153'
- _id: '26'
intvolume: ' 345'
language:
- iso: eng
publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: Path Planning and Trajectory Optimization of Delta Parallel Robot
type: dissertation
user_id: '1112'
volume: 345
year: '2015'
...
---
_id: '24698'
author:
- first_name: C.
full_name: Cheng, C.
last_name: Cheng
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Cheng C, Mahnken R. A multi-mechanism model for cutting simulations based on
the concept of generalized stresses. Computational Materials Science. Published
online 2015:144-158. doi:10.1016/j.commatsci.2014.12.028
apa: Cheng, C., & Mahnken, R. (2015). A multi-mechanism model for cutting simulations
based on the concept of generalized stresses. Computational Materials Science,
144–158. https://doi.org/10.1016/j.commatsci.2014.12.028
bibtex: '@article{Cheng_Mahnken_2015, title={A multi-mechanism model for cutting
simulations based on the concept of generalized stresses}, DOI={10.1016/j.commatsci.2014.12.028},
journal={Computational Materials Science}, author={Cheng, C. and Mahnken, Rolf},
year={2015}, pages={144–158} }'
chicago: Cheng, C., and Rolf Mahnken. “A Multi-Mechanism Model for Cutting Simulations
Based on the Concept of Generalized Stresses.” Computational Materials Science,
2015, 144–58. https://doi.org/10.1016/j.commatsci.2014.12.028.
ieee: 'C. Cheng and R. Mahnken, “A multi-mechanism model for cutting simulations
based on the concept of generalized stresses,” Computational Materials Science,
pp. 144–158, 2015, doi: 10.1016/j.commatsci.2014.12.028.'
mla: Cheng, C., and Rolf Mahnken. “A Multi-Mechanism Model for Cutting Simulations
Based on the Concept of Generalized Stresses.” Computational Materials Science,
2015, pp. 144–58, doi:10.1016/j.commatsci.2014.12.028.
short: C. Cheng, R. Mahnken, Computational Materials Science (2015) 144–158.
date_created: 2021-09-20T11:01:31Z
date_updated: 2023-01-24T14:34:36Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1016/j.commatsci.2014.12.028
language:
- iso: eng
page: 144-158
publication: Computational Materials Science
publication_identifier:
issn:
- 0927-0256
publication_status: published
quality_controlled: '1'
status: public
title: A multi-mechanism model for cutting simulations based on the concept of generalized
stresses
type: journal_article
user_id: '335'
year: '2015'
...
---
_id: '24699'
author:
- first_name: T.
full_name: Leismann, T.
last_name: Leismann
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Leismann T, Mahnken R. Comparison of hyperelastic micromorphic, micropolar
and microstrain continua. International Journal of Non-Linear Mechanics.
Published online 2015:115-127. doi:10.1016/j.ijnonlinmec.2015.08.004
apa: Leismann, T., & Mahnken, R. (2015). Comparison of hyperelastic micromorphic,
micropolar and microstrain continua. International Journal of Non-Linear Mechanics,
115–127. https://doi.org/10.1016/j.ijnonlinmec.2015.08.004
bibtex: '@article{Leismann_Mahnken_2015, title={Comparison of hyperelastic micromorphic,
micropolar and microstrain continua}, DOI={10.1016/j.ijnonlinmec.2015.08.004},
journal={International Journal of Non-Linear Mechanics}, author={Leismann, T.
and Mahnken, Rolf}, year={2015}, pages={115–127} }'
chicago: Leismann, T., and Rolf Mahnken. “Comparison of Hyperelastic Micromorphic,
Micropolar and Microstrain Continua.” International Journal of Non-Linear Mechanics,
2015, 115–27. https://doi.org/10.1016/j.ijnonlinmec.2015.08.004.
ieee: 'T. Leismann and R. Mahnken, “Comparison of hyperelastic micromorphic, micropolar
and microstrain continua,” International Journal of Non-Linear Mechanics,
pp. 115–127, 2015, doi: 10.1016/j.ijnonlinmec.2015.08.004.'
mla: Leismann, T., and Rolf Mahnken. “Comparison of Hyperelastic Micromorphic, Micropolar
and Microstrain Continua.” International Journal of Non-Linear Mechanics,
2015, pp. 115–27, doi:10.1016/j.ijnonlinmec.2015.08.004.
short: T. Leismann, R. Mahnken, International Journal of Non-Linear Mechanics (2015)
115–127.
date_created: 2021-09-20T11:02:05Z
date_updated: 2023-01-24T14:35:20Z
department:
- _id: '9'
- _id: '154'
- _id: '321'
doi: 10.1016/j.ijnonlinmec.2015.08.004
language:
- iso: eng
page: 115-127
publication: International Journal of Non-Linear Mechanics
publication_identifier:
issn:
- 0020-7462
publication_status: published
quality_controlled: '1'
status: public
title: Comparison of hyperelastic micromorphic, micropolar and microstrain continua
type: journal_article
user_id: '335'
year: '2015'
...