--- _id: '23070' author: - first_name: Jan full_name: Berssenbrügge, Jan last_name: Berssenbrügge - first_name: Olga full_name: Wiederkehr, Olga last_name: Wiederkehr - first_name: Claudius full_name: Jähn, Claudius last_name: Jähn - first_name: Matthias full_name: Fischer, Matthias id: '146' last_name: Fischer citation: ama: 'Berssenbrügge J, Wiederkehr O, Jähn C, Fischer M. Anbindung des Virtuellen Prototypen an die Partialmodelle intelligenter technischer Systeme. In: 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung. Vol 342. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2015:65-78.' apa: Berssenbrügge, J., Wiederkehr, O., Jähn, C., & Fischer, M. (2015). Anbindung des Virtuellen Prototypen an die Partialmodelle intelligenter technischer Systeme. In 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung (Vol. 342, pp. 65–78). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. bibtex: '@inproceedings{Berssenbrügge_Wiederkehr_Jähn_Fischer_2015, title={Anbindung des Virtuellen Prototypen an die Partialmodelle intelligenter technischer Systeme}, volume={342}, booktitle={12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Berssenbrügge, Jan and Wiederkehr, Olga and Jähn, Claudius and Fischer, Matthias}, year={2015}, pages={65–78} }' chicago: Berssenbrügge, Jan, Olga Wiederkehr, Claudius Jähn, and Matthias Fischer. “Anbindung Des Virtuellen Prototypen an Die Partialmodelle Intelligenter Technischer Systeme.” In 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung, 342:65–78. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015. ieee: J. Berssenbrügge, O. Wiederkehr, C. Jähn, and M. Fischer, “Anbindung des Virtuellen Prototypen an die Partialmodelle intelligenter technischer Systeme,” in 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2015, vol. 342, pp. 65–78. mla: Berssenbrügge, Jan, et al. “Anbindung Des Virtuellen Prototypen an Die Partialmodelle Intelligenter Technischer Systeme.” 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 65–78. short: 'J. Berssenbrügge, O. Wiederkehr, C. Jähn, M. Fischer, in: 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 65–78.' date_created: 2021-08-09T06:42:37Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' intvolume: ' 342' language: - iso: eng page: 65-78 publication: 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn status: public title: Anbindung des Virtuellen Prototypen an die Partialmodelle intelligenter technischer Systeme type: conference user_id: '24876' volume: 342 year: '2015' ... --- _id: '23071' author: - first_name: Daniel full_name: Zimmermann, Daniel last_name: Zimmermann - first_name: Andreas full_name: Kohlstedt, Andreas last_name: Kohlstedt - first_name: Sandra full_name: Gausemeier, Sandra id: '17793' last_name: Gausemeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Zimmermann D, Kohlstedt A, Gausemeier S, Trächtler A. Entwicklung eines prädiktiven Motion-Cueing-Verfahrens für den ATMOS-Fahrsimulator . In: 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung. Vol 342. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2015:261-272.' apa: Zimmermann, D., Kohlstedt, A., Gausemeier, S., & Trächtler, A. (2015). Entwicklung eines prädiktiven Motion-Cueing-Verfahrens für den ATMOS-Fahrsimulator . In 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung (Vol. 342, pp. 261–272). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. bibtex: '@inproceedings{Zimmermann_Kohlstedt_Gausemeier_Trächtler_2015, title={Entwicklung eines prädiktiven Motion-Cueing-Verfahrens für den ATMOS-Fahrsimulator }, volume={342}, booktitle={12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Zimmermann, Daniel and Kohlstedt, Andreas and Gausemeier, Sandra and Trächtler, Ansgar}, year={2015}, pages={261–272} }' chicago: Zimmermann, Daniel, Andreas Kohlstedt, Sandra Gausemeier, and Ansgar Trächtler. “Entwicklung Eines Prädiktiven Motion-Cueing-Verfahrens Für Den ATMOS-Fahrsimulator .” In 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung, 342:261–72. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015. ieee: D. Zimmermann, A. Kohlstedt, S. Gausemeier, and A. Trächtler, “Entwicklung eines prädiktiven Motion-Cueing-Verfahrens für den ATMOS-Fahrsimulator ,” in 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung, 2015, vol. 342, pp. 261–272. mla: Zimmermann, Daniel, et al. “Entwicklung Eines Prädiktiven Motion-Cueing-Verfahrens Für Den ATMOS-Fahrsimulator .” 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung, vol. 342, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 261–72. short: 'D. Zimmermann, A. Kohlstedt, S. Gausemeier, A. Trächtler, in: 12. Paderborner Workshop Augmented & Virtual Reality in Der Produktentstehung, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2015, pp. 261–272.' date_created: 2021-08-09T06:42:38Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' intvolume: ' 342' language: - iso: eng page: 261-272 publication: 12. Paderborner Workshop Augmented & Virtual Reality in der Produktentstehung publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn status: public title: 'Entwicklung eines prädiktiven Motion-Cueing-Verfahrens für den ATMOS-Fahrsimulator ' type: conference user_id: '24876' volume: 342 year: '2015' ... --- _id: '23072' author: - first_name: Fabian full_name: Bertelsmeier, Fabian last_name: Bertelsmeier - first_name: Tobias full_name: Engelmeier, Tobias last_name: Engelmeier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Bertelsmeier F, Engelmeier T, Trächtler A. Online-Rekonfiguration hybrider Regelkreise in Abhängigkeit variierender Produkteigenschaften. In: Tagungsband Mechatronik 2015. VDI Mechatronik; 2015:97-102.' apa: Bertelsmeier, F., Engelmeier, T., & Trächtler, A. (2015). Online-Rekonfiguration hybrider Regelkreise in Abhängigkeit variierender Produkteigenschaften. In Tagungsband Mechatronik 2015 (pp. 97–102). VDI Mechatronik. bibtex: '@inproceedings{Bertelsmeier_Engelmeier_Trächtler_2015, title={Online-Rekonfiguration hybrider Regelkreise in Abhängigkeit variierender Produkteigenschaften}, booktitle={Tagungsband Mechatronik 2015}, publisher={VDI Mechatronik}, author={Bertelsmeier, Fabian and Engelmeier, Tobias and Trächtler, Ansgar}, year={2015}, pages={97–102} }' chicago: Bertelsmeier, Fabian, Tobias Engelmeier, and Ansgar Trächtler. “Online-Rekonfiguration Hybrider Regelkreise in Abhängigkeit Variierender Produkteigenschaften.” In Tagungsband Mechatronik 2015, 97–102. VDI Mechatronik, 2015. ieee: F. Bertelsmeier, T. Engelmeier, and A. Trächtler, “Online-Rekonfiguration hybrider Regelkreise in Abhängigkeit variierender Produkteigenschaften,” in Tagungsband Mechatronik 2015, 2015, pp. 97–102. mla: Bertelsmeier, Fabian, et al. “Online-Rekonfiguration Hybrider Regelkreise in Abhängigkeit Variierender Produkteigenschaften.” Tagungsband Mechatronik 2015, VDI Mechatronik, 2015, pp. 97–102. short: 'F. Bertelsmeier, T. Engelmeier, A. Trächtler, in: Tagungsband Mechatronik 2015, VDI Mechatronik, 2015, pp. 97–102.' date_created: 2021-08-09T06:42:39Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' - _id: '241' language: - iso: eng page: 97-102 publication: Tagungsband Mechatronik 2015 publisher: VDI Mechatronik status: public title: Online-Rekonfiguration hybrider Regelkreise in Abhängigkeit variierender Produkteigenschaften type: conference user_id: '24876' year: '2015' ... --- _id: '23073' author: - first_name: Matthias full_name: Lochbichler, Matthias last_name: Lochbichler - first_name: Christopher full_name: Lankeit, Christopher last_name: Lankeit - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Martin full_name: Landwehr, Martin last_name: Landwehr - first_name: Ludger full_name: Hoischen, Ludger last_name: Hoischen citation: ama: 'Lochbichler M, Lankeit C, Trächtler A, Landwehr M, Hoischen L. Systematische Wahl der Modellierungstiefe im Entwurfsprozess mechatronischer Systeme am Beispiel eines Geldautomaten. In: Tagungsband Mechatronik. Dortmund: VDI Mechatronik; 2015.' apa: 'Lochbichler, M., Lankeit, C., Trächtler, A., Landwehr, M., & Hoischen, L. (2015). Systematische Wahl der Modellierungstiefe im Entwurfsprozess mechatronischer Systeme am Beispiel eines Geldautomaten. In Tagungsband Mechatronik. Dortmund: VDI Mechatronik.' bibtex: '@inproceedings{Lochbichler_Lankeit_Trächtler_Landwehr_Hoischen_2015, place={Dortmund}, title={Systematische Wahl der Modellierungstiefe im Entwurfsprozess mechatronischer Systeme am Beispiel eines Geldautomaten}, booktitle={Tagungsband Mechatronik}, publisher={VDI Mechatronik}, author={Lochbichler, Matthias and Lankeit, Christopher and Trächtler, Ansgar and Landwehr, Martin and Hoischen, Ludger}, year={2015} }' chicago: 'Lochbichler, Matthias, Christopher Lankeit, Ansgar Trächtler, Martin Landwehr, and Ludger Hoischen. “Systematische Wahl Der Modellierungstiefe Im Entwurfsprozess Mechatronischer Systeme Am Beispiel Eines Geldautomaten.” In Tagungsband Mechatronik. Dortmund: VDI Mechatronik, 2015.' ieee: M. Lochbichler, C. Lankeit, A. Trächtler, M. Landwehr, and L. Hoischen, “Systematische Wahl der Modellierungstiefe im Entwurfsprozess mechatronischer Systeme am Beispiel eines Geldautomaten,” in Tagungsband Mechatronik, 2015. mla: Lochbichler, Matthias, et al. “Systematische Wahl Der Modellierungstiefe Im Entwurfsprozess Mechatronischer Systeme Am Beispiel Eines Geldautomaten.” Tagungsband Mechatronik, VDI Mechatronik, 2015. short: 'M. Lochbichler, C. Lankeit, A. Trächtler, M. Landwehr, L. Hoischen, in: Tagungsband Mechatronik, VDI Mechatronik, Dortmund, 2015.' date_created: 2021-08-09T06:42:40Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' language: - iso: eng place: Dortmund publication: Tagungsband Mechatronik publisher: VDI Mechatronik status: public title: Systematische Wahl der Modellierungstiefe im Entwurfsprozess mechatronischer Systeme am Beispiel eines Geldautomaten type: conference user_id: '24876' year: '2015' ... --- _id: '23074' author: - first_name: Isabel full_name: Koke, Isabel last_name: Koke - first_name: Katharina full_name: Dibblee, Katharina last_name: Dibblee - first_name: Frederik full_name: Hankeln, Frederik last_name: Hankeln - first_name: Stefan full_name: Seidel, Stefan last_name: Seidel - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Hans-Joachim full_name: Schmid, Hans-Joachim id: '464' last_name: Schmid citation: ama: 'Koke I, Dibblee K, Hankeln F, Seidel S, Trächtler A, Schmid H-J. Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen. In: 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn. ; 2015.' apa: Koke, I., Dibblee, K., Hankeln, F., Seidel, S., Trächtler, A., & Schmid, H.-J. (2015). Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen. In 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn. bibtex: '@inproceedings{Koke_Dibblee_Hankeln_Seidel_Trächtler_Schmid_2015, title={Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen}, booktitle={ 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn}, author={Koke, Isabel and Dibblee, Katharina and Hankeln, Frederik and Seidel, Stefan and Trächtler, Ansgar and Schmid, Hans-Joachim}, year={2015} }' chicago: Koke, Isabel, Katharina Dibblee, Frederik Hankeln, Stefan Seidel, Ansgar Trächtler, and Hans-Joachim Schmid. “Tutorenprogramm Und Vertiefungsberatung Stellen Weichen in Entscheidenden Phasen Des Student Life-Cycles in Maschinenbaustudiengängen.” In 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015. ieee: I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, and H.-J. Schmid, “Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen,” in 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn, 2015. mla: Koke, Isabel, et al. “Tutorenprogramm Und Vertiefungsberatung Stellen Weichen in Entscheidenden Phasen Des Student Life-Cycles in Maschinenbaustudiengängen.” 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015. short: 'I. Koke, K. Dibblee, F. Hankeln, S. Seidel, A. Trächtler, H.-J. Schmid, in: 44. Jahrestagung Der Deutschen Gesellschaft Für Hochschuldidaktik - Hochschuldidaktik Im Dialog, Paderborn, 2015.' date_created: 2021-08-09T06:42:41Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' language: - iso: eng publication: ' 44. Jahrestagung der Deutschen Gesellschaft für Hochschuldidaktik - Hochschuldidaktik im Dialog, Paderborn' status: public title: Tutorenprogramm und Vertiefungsberatung stellen Weichen in entscheidenden Phasen des Student Life-Cycles in Maschinenbaustudiengängen type: conference user_id: '24876' year: '2015' ... --- _id: '23075' author: - first_name: Jan full_name: Michael, Jan last_name: Michael - first_name: Michael full_name: Hillebrand, Michael last_name: Hillebrand - first_name: Roman full_name: Dumitrescu, Roman id: '16190' last_name: Dumitrescu - first_name: Christian full_name: Henke, Christian last_name: Henke - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Michael J, Hillebrand M, Dumitrescu R, Henke C, Trächtler A. Modellbasierte Mehrzieloptimierung zur Integration von Hausgeräten in SmartGrids. In: VDI Mechatronik 2015 Tagungsband. VDI Mechatronik; 2015:245-250.' apa: Michael, J., Hillebrand, M., Dumitrescu, R., Henke, C., & Trächtler, A. (2015). Modellbasierte Mehrzieloptimierung zur Integration von Hausgeräten in SmartGrids. In VDI Mechatronik 2015 Tagungsband (pp. 245–250). VDI Mechatronik. bibtex: '@inproceedings{Michael_Hillebrand_Dumitrescu_Henke_Trächtler_2015, title={Modellbasierte Mehrzieloptimierung zur Integration von Hausgeräten in SmartGrids}, booktitle={VDI Mechatronik 2015 Tagungsband}, publisher={VDI Mechatronik}, author={Michael, Jan and Hillebrand, Michael and Dumitrescu, Roman and Henke, Christian and Trächtler, Ansgar}, year={2015}, pages={245–250} }' chicago: Michael, Jan, Michael Hillebrand, Roman Dumitrescu, Christian Henke, and Ansgar Trächtler. “Modellbasierte Mehrzieloptimierung Zur Integration von Hausgeräten in SmartGrids.” In VDI Mechatronik 2015 Tagungsband, 245–50. VDI Mechatronik, 2015. ieee: J. Michael, M. Hillebrand, R. Dumitrescu, C. Henke, and A. Trächtler, “Modellbasierte Mehrzieloptimierung zur Integration von Hausgeräten in SmartGrids,” in VDI Mechatronik 2015 Tagungsband, 2015, pp. 245–250. mla: Michael, Jan, et al. “Modellbasierte Mehrzieloptimierung Zur Integration von Hausgeräten in SmartGrids.” VDI Mechatronik 2015 Tagungsband, VDI Mechatronik, 2015, pp. 245–50. short: 'J. Michael, M. Hillebrand, R. Dumitrescu, C. Henke, A. Trächtler, in: VDI Mechatronik 2015 Tagungsband, VDI Mechatronik, 2015, pp. 245–250.' date_created: 2021-08-09T06:42:42Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' - _id: '241' language: - iso: eng page: 245-250 publication: VDI Mechatronik 2015 Tagungsband publisher: VDI Mechatronik status: public title: Modellbasierte Mehrzieloptimierung zur Integration von Hausgeräten in SmartGrids type: conference user_id: '24876' year: '2015' ... --- _id: '23076' author: - first_name: Chairit full_name: Wuthishuwong, Chairit last_name: Wuthishuwong - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Torsten full_name: Bruns, Torsten last_name: Bruns citation: ama: Wuthishuwong C, Trächtler A, Bruns T. Safe trajectory planning for autonomous intersection management by using vehicle to infrastructure communication. EURASIP Journal on Wireless Communications and Networking. 2015;33(1). apa: Wuthishuwong, C., Trächtler, A., & Bruns, T. (2015). Safe trajectory planning for autonomous intersection management by using vehicle to infrastructure communication. EURASIP Journal on Wireless Communications and Networking, 33(1). bibtex: '@article{Wuthishuwong_Trächtler_Bruns_2015, title={Safe trajectory planning for autonomous intersection management by using vehicle to infrastructure communication}, volume={33}, number={1}, journal={EURASIP Journal on Wireless Communications and Networking}, author={Wuthishuwong, Chairit and Trächtler, Ansgar and Bruns, Torsten}, year={2015} }' chicago: Wuthishuwong, Chairit, Ansgar Trächtler, and Torsten Bruns. “Safe Trajectory Planning for Autonomous Intersection Management by Using Vehicle to Infrastructure Communication.” EURASIP Journal on Wireless Communications and Networking 33, no. 1 (2015). ieee: C. Wuthishuwong, A. Trächtler, and T. Bruns, “Safe trajectory planning for autonomous intersection management by using vehicle to infrastructure communication,” EURASIP Journal on Wireless Communications and Networking, vol. 33, no. 1, 2015. mla: Wuthishuwong, Chairit, et al. “Safe Trajectory Planning for Autonomous Intersection Management by Using Vehicle to Infrastructure Communication.” EURASIP Journal on Wireless Communications and Networking, vol. 33, no. 1, 2015. short: C. Wuthishuwong, A. Trächtler, T. Bruns, EURASIP Journal on Wireless Communications and Networking 33 (2015). date_created: 2021-08-09T06:42:43Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' intvolume: ' 33' issue: '1' language: - iso: eng publication: EURASIP Journal on Wireless Communications and Networking status: public title: Safe trajectory planning for autonomous intersection management by using vehicle to infrastructure communication type: journal_article user_id: '24876' volume: 33 year: '2015' ... --- _id: '23077' author: - first_name: Christopher full_name: Lankeit, Christopher last_name: Lankeit - first_name: Matthias full_name: Lochbichler, Matthias last_name: Lochbichler - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: Lankeit C, Lochbichler M, Trächtler A. Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach. Jurnal Teknologi. 2015;76(4). apa: Lankeit, C., Lochbichler, M., & Trächtler, A. (2015). Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach. Jurnal Teknologi, 76(4). bibtex: '@article{Lankeit_Lochbichler_Trächtler_2015, title={Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach}, volume={76}, number={4}, journal={Jurnal Teknologi}, author={Lankeit, Christopher and Lochbichler, Matthias and Trächtler, Ansgar}, year={2015} }' chicago: Lankeit, Christopher, Matthias Lochbichler, and Ansgar Trächtler. “Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach.” Jurnal Teknologi 76, no. 4 (2015). ieee: C. Lankeit, M. Lochbichler, and A. Trächtler, “Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach,” Jurnal Teknologi, vol. 76, no. 4, 2015. mla: Lankeit, Christopher, et al. “Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach.” Jurnal Teknologi, vol. 76, no. 4, 2015. short: C. Lankeit, M. Lochbichler, A. Trächtler, Jurnal Teknologi 76 (2015). date_created: 2021-08-09T06:42:45Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' intvolume: ' 76' issue: '4' language: - iso: eng publication: Jurnal Teknologi status: public title: Challenges in Requirements Engineering for Mechatronic Systems – Problem Analysis and First Approach type: journal_article user_id: '24876' volume: 76 year: '2015' ... --- _id: '23078' author: - first_name: Christopher full_name: Lankeit, Christopher last_name: Lankeit - first_name: Matthias full_name: Lochbichler, Matthias last_name: Lochbichler - first_name: Felix full_name: Oestersötebier, Felix last_name: Oestersötebier - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Martin full_name: Landwehr, Martin last_name: Landwehr citation: ama: 'Lankeit C, Lochbichler M, Oestersötebier F, Trächtler A, Landwehr M. From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System. In: Proceedings. IEEE International Symposium on Systems Engineering. IEEE; 2015.' apa: Lankeit, C., Lochbichler, M., Oestersötebier, F., Trächtler, A., & Landwehr, M. (2015). From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System. In Proceedings. IEEE. bibtex: '@inproceedings{Lankeit_Lochbichler_Oestersötebier_Trächtler_Landwehr_2015, series={IEEE International Symposium on Systems Engineering}, title={From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System}, booktitle={Proceedings}, publisher={IEEE}, author={Lankeit, Christopher and Lochbichler, Matthias and Oestersötebier, Felix and Trächtler, Ansgar and Landwehr, Martin}, year={2015}, collection={IEEE International Symposium on Systems Engineering} }' chicago: Lankeit, Christopher, Matthias Lochbichler, Felix Oestersötebier, Ansgar Trächtler, and Martin Landwehr. “From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System.” In Proceedings. IEEE International Symposium on Systems Engineering. IEEE, 2015. ieee: C. Lankeit, M. Lochbichler, F. Oestersötebier, A. Trächtler, and M. Landwehr, “From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System,” in Proceedings, 2015. mla: Lankeit, Christopher, et al. “From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System.” Proceedings, IEEE, 2015. short: 'C. Lankeit, M. Lochbichler, F. Oestersötebier, A. Trächtler, M. Landwehr, in: Proceedings, IEEE, 2015.' date_created: 2021-08-09T06:42:46Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' language: - iso: eng publication: Proceedings publisher: IEEE series_title: IEEE International Symposium on Systems Engineering status: public title: From Goals to Systems via Technical Requirements and Physical Models - Design of an Intelligent Cash Handling System type: conference user_id: '24876' year: '2015' ... --- _id: '23079' author: - first_name: Arathi full_name: Pai, Arathi last_name: Pai - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler - first_name: Mirko full_name: Schaper, Mirko last_name: Schaper citation: ama: 'Pai A, Trächtler A, Schaper M. Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics. In: IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON. ; 2015.' apa: Pai, A., Trächtler, A., & Schaper, M. (2015). Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics. In IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON. bibtex: '@inproceedings{Pai_Trächtler_Schaper_2015, title={Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics}, booktitle={IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON}, author={Pai, Arathi and Trächtler, Ansgar and Schaper, Mirko}, year={2015} }' chicago: Pai, Arathi, Ansgar Trächtler, and Mirko Schaper. “Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics.” In IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON, 2015. ieee: A. Pai, A. Trächtler, and M. Schaper, “Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics,” in IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON, 2015. mla: Pai, Arathi, et al. “Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics.” IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON, 2015. short: 'A. Pai, A. Trächtler, M. Schaper, in: IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON, 2015.' date_created: 2021-08-09T06:42:47Z date_updated: 2022-01-06T06:55:45Z department: - _id: '153' - _id: '241' language: - iso: eng publication: IFAC 1st Conference on Modelling, Identification and Control of Nonlinear Systems - MICNON status: public title: Real-Time Compatible Phenomenological Modelling of the Austenitic Phase in Shape Memory Alloys as an Example for Modelling of Materials with Repeatable Non-Linear Characteristics type: conference user_id: '24876' year: '2015' ... --- _id: '21683' abstract: - lang: eng text: Purpose – This paper aims to present a methodology to help end-users to find appropriate part candidates for the use of the additive manufacturing (AM) technology. These shall be capable of bringing AM into their businesses. The concept furthermore includes approaches for redesigning current available parts and helps to estimate the economic implications of the use of the technology. Design/methodology/approach – The approach starts to discuss general economic aspects for the successful use of AM. While describing the introduction of new technologies into existing businesses, the importance of an appropriate part selection for AM is pointed out. A methodology for a part selection process is presented, and the different criteria are developed. An approach for a redesign of the selected parts, including the gathering of requirements, is given based on different sample parts. A variation of criteria to include measures for product piracy is highlighted. Findings – The methodology has proven applicability in several research and industry projects in aerospace applications. Independent part selections from experts analyzed within a project of the European Space Agency had a 90 per cent overlap with the results. It allows companies with only basic AM knowledge to start a part screening for applicable AM candidates in their own company with a reasonable effort. Originality/value – The methodology for the redesign process helps to identify the main functions of the products targeted and the relevant environment, so one can benefit from the various advantages that AM has to offer. The selection methodology helps to ask the right questions and to reduce the effort. author: - first_name: C. full_name: Lindemann, C. last_name: Lindemann - first_name: U. full_name: Jahnke, U. last_name: Jahnke - first_name: T. full_name: Reiher, T. last_name: Reiher - first_name: R. full_name: Koch, R. last_name: Koch citation: ama: 'Lindemann C, Jahnke U, Reiher T, Koch R. Towards a sustainable and economic selection of part candidates for Additive Manufacturing. In: Rapid Prototyping Journal. Vol 21. Emerald; 2015:216-227. doi:https://doi.org/10.1108/RPJ-12-2014-0179' apa: Lindemann, C., Jahnke, U., Reiher, T., & Koch, R. (2015). Towards a sustainable and economic selection of part candidates for Additive Manufacturing. In Rapid Prototyping Journal (Vol. 21, pp. 216–227). Emerald. https://doi.org/10.1108/RPJ-12-2014-0179 bibtex: '@inproceedings{Lindemann_Jahnke_Reiher_Koch_2015, title={Towards a sustainable and economic selection of part candidates for Additive Manufacturing}, volume={21}, DOI={https://doi.org/10.1108/RPJ-12-2014-0179}, number={2}, booktitle={Rapid Prototyping Journal}, publisher={Emerald}, author={Lindemann, C. and Jahnke, U. and Reiher, T. and Koch, R.}, year={2015}, pages={216–227} }' chicago: Lindemann, C., U. Jahnke, T. Reiher, and R. Koch. “Towards a Sustainable and Economic Selection of Part Candidates for Additive Manufacturing.” In Rapid Prototyping Journal, 21:216–27. Emerald, 2015. https://doi.org/10.1108/RPJ-12-2014-0179. ieee: C. Lindemann, U. Jahnke, T. Reiher, and R. Koch, “Towards a sustainable and economic selection of part candidates for Additive Manufacturing,” in Rapid Prototyping Journal, 2015, vol. 21, no. 2, pp. 216–227. mla: Lindemann, C., et al. “Towards a Sustainable and Economic Selection of Part Candidates for Additive Manufacturing.” Rapid Prototyping Journal, vol. 21, no. 2, Emerald, 2015, pp. 216–27, doi:https://doi.org/10.1108/RPJ-12-2014-0179. short: 'C. Lindemann, U. Jahnke, T. Reiher, R. Koch, in: Rapid Prototyping Journal, Emerald, 2015, pp. 216–227.' date_created: 2021-04-21T07:22:24Z date_updated: 2022-01-06T06:55:10Z department: - _id: '144' - _id: '219' - _id: '624' doi: https://doi.org/10.1108/RPJ-12-2014-0179 intvolume: ' 21' issue: '2' language: - iso: eng page: 216-227 publication: Rapid Prototyping Journal publication_identifier: isbn: - 1355-2546 publisher: Emerald status: public title: Towards a sustainable and economic selection of part candidates for Additive Manufacturing type: conference user_id: '55833' volume: 21 year: '2015' ... --- _id: '21684' abstract: - lang: eng text: Additive Manufacturing offers a high potential in aerospace industry due to its freedom of design and the ability to manufacture complex and lightweight parts. The low number of units, high quality standards and fast response time are special challenges that have to be met especially in the Maintenance, Repair and Overhaul sector. Thus, companies have to decide at which point it is economic to apply Additive Manufacturing. However, companies lack experience on this new technology. This is why a tool is required that takes into account the above mentioned crucial points and supports the decision process. The paper analyzes aviation’s characteristics with regard to Additive Manufacturing. The structure of current MRO repair workflows is investigated to identify a feasible application for Additive Manufacturing. Additionally the supply chain will be examined to indicate the benefit which the technology can generate in this highly demanding field. The findings are integrated into a methodology that supports the decision whether to apply Additive Manufacturing on the basis of costs, time and quality. author: - first_name: G. full_name: Deppe, G. last_name: Deppe - first_name: C. full_name: Lindemann, C. last_name: Lindemann - first_name: R. full_name: Koch, R. last_name: Koch citation: ama: 'Deppe G, Lindemann C, Koch R. Developement of an economic decision support for the application of Additive Manufacturing in aerospace. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:1560-1563. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf' apa: Deppe, G., Lindemann, C., & Koch, R. (2015). Developement of an economic decision support for the application of Additive Manufacturing in aerospace. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1560–1563). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf bibtex: '@inproceedings{Deppe_Lindemann_Koch_2015, title={Developement of an economic decision support for the application of Additive Manufacturing in aerospace}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Deppe, G. and Lindemann, C. and Koch, R.}, year={2015}, pages={1560–1563} }' chicago: Deppe, G., C. Lindemann, and R. Koch. “Developement of an Economic Decision Support for the Application of Additive Manufacturing in Aerospace.” In 26th Annual International Solid Freeform Fabrication Symposium, 26:1560–63, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf. ieee: G. Deppe, C. Lindemann, and R. Koch, “Developement of an economic decision support for the application of Additive Manufacturing in aerospace,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1560–1563. mla: Deppe, G., et al. “Developement of an Economic Decision Support for the Application of Additive Manufacturing in Aerospace.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1560–63, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf. short: 'G. Deppe, C. Lindemann, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1560–1563.' date_created: 2021-04-21T07:22:25Z date_updated: 2022-01-06T06:55:10Z department: - _id: '144' - _id: '219' - _id: '624' doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-125-Deppe.pdf intvolume: ' 26' language: - iso: eng page: 1560-1563 publication: 26th Annual International Solid Freeform Fabrication Symposium status: public title: Developement of an economic decision support for the application of Additive Manufacturing in aerospace type: conference user_id: '55833' volume: 26 year: '2015' ... --- _id: '21685' abstract: - lang: eng text: 'Presently the implications Additive Manufacturing (AM) on intellectual properties are discussed in public. Here AM is often mentioned as a driver for product piracy as it allows to produce and to copy objects with any geometries. Imitators need a lot of information to copy an object accurately. As reverse engineering has been identified as the most important information source for product imitators, AM can also help to reduce the threat of product piracy when correctly applied in the product development. Due to the layer wise production process that allows the manufacturing of very complex shapes and geometries, the reverse-engineering process can be complicated by far. By this, quite contrary to the public opinion, AM can increase the needed effort of imitators and strongly reduce the economic efficiency of product piracy. This paper will show different protection measures and a methodological approach of how to apply these measures to a product. Beside the protective effect some measures allow a traceability of parts over the product’s lifecycle and thus support the quality management of AM processes and additively produced parts. ' author: - first_name: U. full_name: Jahnke, U. last_name: Jahnke - first_name: J. full_name: Büsching, J. last_name: Büsching - first_name: T. full_name: Reiher, T. last_name: Reiher - first_name: R. full_name: Koch, R. last_name: Koch citation: ama: 'Jahnke U, Büsching J, Reiher T, Koch R. Protection measures against product piracy and application by the use of AM. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:1601-1611. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf' apa: Jahnke, U., Büsching, J., Reiher, T., & Koch, R. (2015). Protection measures against product piracy and application by the use of AM. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1601–1611). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf bibtex: '@inproceedings{Jahnke_Büsching_Reiher_Koch_2015, title={Protection measures against product piracy and application by the use of AM}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Jahnke, U. and Büsching, J. and Reiher, T. and Koch, R.}, year={2015}, pages={1601–1611} }' chicago: Jahnke, U., J. Büsching, T. Reiher, and R. Koch. “Protection Measures against Product Piracy and Application by the Use of AM.” In 26th Annual International Solid Freeform Fabrication Symposium, 26:1601–11, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf. ieee: U. Jahnke, J. Büsching, T. Reiher, and R. Koch, “Protection measures against product piracy and application by the use of AM,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1601–1611. mla: Jahnke, U., et al. “Protection Measures against Product Piracy and Application by the Use of AM.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1601–11, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf. short: 'U. Jahnke, J. Büsching, T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1601–1611.' date_created: 2021-04-21T07:22:26Z date_updated: 2022-01-06T06:55:10Z department: - _id: '144' - _id: '219' - _id: '624' doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-128-Jahnke.pdf intvolume: ' 26' language: - iso: eng page: 1601-1611 publication: 26th Annual International Solid Freeform Fabrication Symposium status: public title: Protection measures against product piracy and application by the use of AM type: conference user_id: '55833' volume: 26 year: '2015' ... --- _id: '21686' abstract: - lang: eng text: 'Additive Manufacturing (AM) offers high potential due to its freedom of design for structural parts. Especially in combination with FE-based topology optimization an optimal use of material and thus significant weight reductions can be expected. However, the application of AM is hampered by different additional manufacturing processes along the entire production chain and data handling induced restrictions.Disadvantages emerge from a lack of adjustment of the entire design process for AM. First the optimization algorithms are not targeted to the opportunities and restrictions of AM –represented by design rules – like the design of support structures. Secondly, the CAD software is not adjusted to AM in particular. Creating freeform shaped surfaces based on the optimization results is significantly less convenient than building defined blocks or turning parts following the needs of conventional machining. The indispensable subsequent interpretation of optimization results regarding the design rules and the possibilities of CAD-tools counteracts optimal results. This paper considers different approaches for a Topology Optimization (TO)-shape regaining on different sample parts including telecommunication satellite parts. An innovative design methodology is presented getting crucial for creating high quality designs. ' author: - first_name: T. full_name: Reiher, T. last_name: Reiher - first_name: R. full_name: Koch, R. last_name: Koch citation: ama: 'Reiher T, Koch R. FE-Optimization and data handling for Additive Manufacturing of structural parts. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:1092-1103. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf' apa: Reiher, T., & Koch, R. (2015). FE-Optimization and data handling for Additive Manufacturing of structural parts. In 26th Annual International Solid Freeform Fabrication Symposium (Vol. 26, pp. 1092–1103). http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf bibtex: '@inproceedings{Reiher_Koch_2015, title={FE-Optimization and data handling for Additive Manufacturing of structural parts}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Reiher, T. and Koch, R.}, year={2015}, pages={1092–1103} }' chicago: Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive Manufacturing of Structural Parts.” In 26th Annual International Solid Freeform Fabrication Symposium, 26:1092–1103, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf. ieee: T. Reiher and R. Koch, “FE-Optimization and data handling for Additive Manufacturing of structural parts,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 1092–1103. mla: Reiher, T., and R. Koch. “FE-Optimization and Data Handling for Additive Manufacturing of Structural Parts.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 1092–103, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf. short: 'T. Reiher, R. Koch, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 1092–1103.' date_created: 2021-04-21T07:22:27Z date_updated: 2022-01-06T06:55:10Z department: - _id: '144' - _id: '219' - _id: '624' doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-90-Reiher.pdf intvolume: ' 26' language: - iso: eng page: 1092-1103 publication: 26th Annual International Solid Freeform Fabrication Symposium status: public title: FE-Optimization and data handling for Additive Manufacturing of structural parts type: conference user_id: '55833' volume: 26 year: '2015' ... --- _id: '21700' author: - first_name: U. full_name: Jahnke, U. last_name: Jahnke - first_name: C. full_name: Lindemann, C. last_name: Lindemann citation: ama: 'Jahnke U, Lindemann C. Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy. In: Inside 3D Printing Conference and Expo. ; 2015.' apa: Jahnke, U., & Lindemann, C. (2015). Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy. In Inside 3D Printing Conference and Expo. bibtex: '@inproceedings{Jahnke_Lindemann_2015, title={Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy}, booktitle={Inside 3D Printing Conference and Expo}, author={Jahnke, U. and Lindemann, C.}, year={2015} }' chicago: Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy.” In Inside 3D Printing Conference and Expo, 2015. ieee: U. Jahnke and C. Lindemann, “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy,” in Inside 3D Printing Conference and Expo, 2015. mla: Jahnke, U., and C. Lindemann. “Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy.” Inside 3D Printing Conference and Expo, 2015. short: 'U. Jahnke, C. Lindemann, in: Inside 3D Printing Conference and Expo, 2015.' date_created: 2021-04-21T07:40:33Z date_updated: 2022-01-06T06:55:11Z department: - _id: '144' - _id: '219' - _id: '624' language: - iso: eng publication: Inside 3D Printing Conference and Expo status: public title: Sustainable Part Selection for the Use of Additive Manufacturing in Companies Focussing on Prevention of Product Piracy type: conference user_id: '55833' year: '2015' ... --- _id: '21701' abstract: - lang: eng text: The aerospace sector is characterized by long product life cycles and a need for lightweight design. Additive manufacturing is a technology that produces parts layer by layer and thus enables the manufacturing of any complex parts at nearly no extra costs. A topology optimization enhances the part’s performance for their special purpose. The results are often complex bionic structures that cannot be produced with conventional manufacturing technologies. The paper analyzes how the high potential of this technology can be applied to aerospace parts. A topology optimization will be conducted for an aircraft part explaining the crucial points and a life cycle analysis examines the achieved sustainable improvements for the aircraft’s life cycle. author: - first_name: G. full_name: Deppe, G. last_name: Deppe - first_name: T. full_name: Reiher, T. last_name: Reiher - first_name: R. full_name: Koch, R. last_name: Koch citation: ama: 'Deppe G, Reiher T, Koch R. Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing. In: International Conference Production Engineering and Management 2015. Vol 5. ; 2015:219-230. doi:https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf' apa: Deppe, G., Reiher, T., & Koch, R. (2015). Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing. In International Conference Production Engineering and Management 2015 (Vol. 5, pp. 219–230). https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf bibtex: '@inproceedings{Deppe_Reiher_Koch_2015, title={Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing}, volume={5}, DOI={https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf}, booktitle={International Conference Production Engineering and Management 2015}, author={Deppe, G. and Reiher, T. and Koch, R.}, year={2015}, pages={219–230} }' chicago: Deppe, G., T. Reiher, and R. Koch. “Exploring the Cost and Lifetime Benefits of a Topology Optimized Aerospace Part Applying Additive Manufacturing.” In International Conference Production Engineering and Management 2015, 5:219–30, 2015. https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf. ieee: G. Deppe, T. Reiher, and R. Koch, “Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing,” in International Conference Production Engineering and Management 2015, 2015, vol. 5, pp. 219–230. mla: Deppe, G., et al. “Exploring the Cost and Lifetime Benefits of a Topology Optimized Aerospace Part Applying Additive Manufacturing.” International Conference Production Engineering and Management 2015, vol. 5, 2015, pp. 219–30, doi:https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf. short: 'G. Deppe, T. Reiher, R. Koch, in: International Conference Production Engineering and Management 2015, 2015, pp. 219–230.' date_created: 2021-04-21T07:40:34Z date_updated: 2022-01-06T06:55:11Z department: - _id: '144' - _id: '219' - _id: '624' doi: https://www.th-owl.de/elsa/download/335/336/PEM_Tagung_zusammen2015.pdf intvolume: ' 5' language: - iso: eng page: 219-230 publication: International Conference Production Engineering and Management 2015 publication_identifier: isbn: - '9783941645110' status: public title: Exploring the cost and lifetime benefits of a topology optimized aerospace part applying additive manufacturing type: conference user_id: '55833' volume: 5 year: '2015' ... --- _id: '21703' author: - first_name: C. full_name: Lindemann, C. last_name: Lindemann - first_name: T. full_name: Reiher, T. last_name: Reiher - first_name: R. full_name: Koch, R. last_name: Koch citation: ama: 'Lindemann C, Reiher T, Koch R. Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing. In: Paris Space Week. ; 2015.' apa: Lindemann, C., Reiher, T., & Koch, R. (2015). Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing. In Paris Space Week. bibtex: '@inproceedings{Lindemann_Reiher_Koch_2015, title={Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing}, booktitle={Paris Space Week}, author={Lindemann, C. and Reiher, T. and Koch, R.}, year={2015} }' chicago: Lindemann, C., T. Reiher, and R. Koch. “Guidelines for a Sustainable and Economic Selection of Part Candidates for Space Applications Using Additive Manufacturing.” In Paris Space Week, 2015. ieee: C. Lindemann, T. Reiher, and R. Koch, “Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing,” in Paris Space Week, 2015. mla: Lindemann, C., et al. “Guidelines for a Sustainable and Economic Selection of Part Candidates for Space Applications Using Additive Manufacturing.” Paris Space Week, 2015. short: 'C. Lindemann, T. Reiher, R. Koch, in: Paris Space Week, 2015.' date_created: 2021-04-21T07:45:00Z date_updated: 2022-01-06T06:55:11Z department: - _id: '144' - _id: '219' - _id: '624' language: - iso: eng publication: Paris Space Week status: public title: Guidelines for a sustainable and economic selection of part candidates for space applications using additive manufacturing type: conference user_id: '55833' year: '2015' ... --- _id: '22031' author: - first_name: F. full_name: Knoop, F. last_name: Knoop - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Knoop F, Schöppner V. Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30. In: ASPE Spring Topical Meeting. ; 2015:26-31. doi:https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30' apa: Knoop, F., & Schöppner, V. (2015). Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30. ASPE Spring Topical Meeting, 26–31. https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30 bibtex: '@inproceedings{Knoop_Schöppner_2015, title={Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30}, DOI={https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30}, booktitle={ASPE Spring Topical Meeting}, author={Knoop, F. and Schöppner, Volker}, year={2015}, pages={26–31} }' chicago: Knoop, F., and Volker Schöppner. “Analysis and Optimization of the Dimensional Accuracy for FDM Parts Manufactured with ABS-M30.” In ASPE Spring Topical Meeting, 26–31, 2015. https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30. ieee: 'F. Knoop and V. Schöppner, “Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30,” in ASPE Spring Topical Meeting, 2015, pp. 26–31, doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30.' mla: Knoop, F., and Volker Schöppner. “Analysis and Optimization of the Dimensional Accuracy for FDM Parts Manufactured with ABS-M30.” ASPE Spring Topical Meeting, 2015, pp. 26–31, doi:https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30. short: 'F. Knoop, V. Schöppner, in: ASPE Spring Topical Meeting, 2015, pp. 26–31.' date_created: 2021-05-07T13:23:12Z date_updated: 2022-01-06T06:55:23Z department: - _id: '219' - _id: '624' - _id: '367' - _id: '321' - _id: '9' doi: https://www.researchgate.net/publication/283735736_Analysis_and_optimization_of_the_dimensional_accuracy_for_FDM_parts_manufactured_with_ABS-M30 language: - iso: eng page: 26-31 publication: ASPE Spring Topical Meeting status: public title: Analysis and Optimization of the Dimensional Accuracy for FDM Parts manufactured with ABS-M30 type: conference user_id: '70729' year: '2015' ... --- _id: '22044' abstract: - lang: eng text: Fused Deposition Modeling (FDM) is an Additive Manufacturing (AM) technology which is used for prototypes, single-part production and also small batch productions. For use as a final product, it is important that the parts have good mechanical properties, high dimensional accuracy and smooth surfaces. The knowledge of the mechanical properties is very important for the design engineer when it comes to the component design. End-use products out of the FDM process have to resist applied forces. In this paper, investigations were conducted with the polymer Polyamide 12 (FDM Nylon 12) from Stratasys Inc. This polymer can be processed with three different tip sizes resulting in different layer thicknesses from 178 µm to 330 µm. Thus, the mechanical properties were determined for these layer thicknesses and for different orientations on the build platform. In addition to the mechanical properties the thermal properties (e.g. with a DSC analysis) are also investigated. author: - first_name: F. full_name: Knoop, F. last_name: Knoop - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner citation: ama: 'Knoop F, Schöppner V. Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12. In: 26th Annual International Solid Freeform Fabrication Symposium. Vol 26. ; 2015:935-948. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf' apa: Knoop, F., & Schöppner, V. (2015). Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12. 26th Annual International Solid Freeform Fabrication Symposium, 26, 935–948. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf bibtex: '@inproceedings{Knoop_Schöppner_2015, title={Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12}, volume={26}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf}, booktitle={26th Annual International Solid Freeform Fabrication Symposium}, author={Knoop, F. and Schöppner, Volker}, year={2015}, pages={935–948} }' chicago: Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of FDM Parts Manufactured with Polyamide 12.” In 26th Annual International Solid Freeform Fabrication Symposium, 26:935–48, 2015. http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf. ieee: 'F. Knoop and V. Schöppner, “Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12,” in 26th Annual International Solid Freeform Fabrication Symposium, 2015, vol. 26, pp. 935–948, doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf.' mla: Knoop, F., and Volker Schöppner. “Mechanical and Thermal Properties of FDM Parts Manufactured with Polyamide 12.” 26th Annual International Solid Freeform Fabrication Symposium, vol. 26, 2015, pp. 935–48, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf. short: 'F. Knoop, V. Schöppner, in: 26th Annual International Solid Freeform Fabrication Symposium, 2015, pp. 935–948.' date_created: 2021-05-07T13:23:27Z date_updated: 2022-01-06T06:55:23Z department: - _id: '219' - _id: '624' - _id: '367' - _id: '321' - _id: '9' doi: http://utw10945.utweb.utexas.edu/sites/default/files/2015/2015-77-Knoop.pdf intvolume: ' 26' language: - iso: eng page: 935-948 publication: 26th Annual International Solid Freeform Fabrication Symposium status: public title: Mechanical and Thermal Properties of FDM Parts manufactured with Polyamide 12 type: conference user_id: '70729' volume: 26 year: '2015' ... --- _id: '9943' abstract: - lang: eng text: Changing manufacturing technologies or material in well-known processes has to be followed by an adaption of process parameters. In case of the transition from aluminum wire to copper wire in heavy wire bonding, the adaption effort is high due to the strongly different mechanical properties of the wire. One of these adaption aspects, apart from wire material, is the existent oxide layers on wire and substrate. The ductile aluminum oxide is not influencing the bonding process much, because it is supposed to break apart in case of plastic deformation. The lubricating copper oxide layer has to be removed before micro welds can develop. Therefore, in this paper, experiments are carried out at low frequency to determine the friction energy needed to abrade the copper oxide layer of wire and substrate, which is indicated by an increase in the resulting friction coefficient. The friction energy per contact area to remove the interfering layers at low frequency is compared to the real bonding process working at 58 kHz. In addition, a theoretical concept is being described to get a grasp of the occurring mechanism. In the end a proposal is given how to set bonding parameters to get the cleanest surfaces with the installed bond tool. author: - first_name: Simon full_name: Althoff, Simon last_name: Althoff - first_name: Andreas full_name: Unger, Andreas last_name: Unger - first_name: Walter full_name: Sextro, Walter id: '21220' last_name: Sextro - first_name: Florian full_name: Eacock, Florian last_name: Eacock citation: ama: 'Althoff S, Unger A, Sextro W, Eacock F. Improving the cleaning process in copper wire bonding by adapting bonding parameters. In: 2015 17th Electronics Packaging Technology Conference. ; 2015:1-6. doi:10.1109/EPTC.2015.7412402' apa: Althoff, S., Unger, A., Sextro, W., & Eacock, F. (2015). Improving the cleaning process in copper wire bonding by adapting bonding parameters. In 2015 17th Electronics Packaging Technology Conference (pp. 1–6). https://doi.org/10.1109/EPTC.2015.7412402 bibtex: '@inproceedings{Althoff_Unger_Sextro_Eacock_2015, title={Improving the cleaning process in copper wire bonding by adapting bonding parameters}, DOI={10.1109/EPTC.2015.7412402}, booktitle={2015 17th Electronics Packaging Technology Conference}, author={Althoff, Simon and Unger, Andreas and Sextro, Walter and Eacock, Florian}, year={2015}, pages={1–6} }' chicago: Althoff, Simon, Andreas Unger, Walter Sextro, and Florian Eacock. “Improving the Cleaning Process in Copper Wire Bonding by Adapting Bonding Parameters.” In 2015 17th Electronics Packaging Technology Conference, 1–6, 2015. https://doi.org/10.1109/EPTC.2015.7412402. ieee: S. Althoff, A. Unger, W. Sextro, and F. Eacock, “Improving the cleaning process in copper wire bonding by adapting bonding parameters,” in 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6. mla: Althoff, Simon, et al. “Improving the Cleaning Process in Copper Wire Bonding by Adapting Bonding Parameters.” 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6, doi:10.1109/EPTC.2015.7412402. short: 'S. Althoff, A. Unger, W. Sextro, F. Eacock, in: 2015 17th Electronics Packaging Technology Conference, 2015, pp. 1–6.' date_created: 2019-05-27T08:10:43Z date_updated: 2020-05-07T05:33:51Z department: - _id: '151' doi: 10.1109/EPTC.2015.7412402 language: - iso: eng page: 1-6 project: - _id: '92' grant_number: 02 PQ2210 name: Intelligente Herstellung zuverlässiger Kupferbondverbindungen publication: 2015 17th Electronics Packaging Technology Conference quality_controlled: '1' status: public title: Improving the cleaning process in copper wire bonding by adapting bonding parameters type: conference user_id: '210' year: '2015' ...