---
_id: '23680'
author:
- first_name: Mareen
full_name: Vaßholz, Mareen
last_name: Vaßholz
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
citation:
ama: 'Vaßholz M, Gräßler I. Early Analysis of the System Dynamics of Self-Optimizing
Systems. In: Proceedings of the DESIGN 2014, 13th International DESIGN Conference,
Band 2. Vol 2. Dubrovnik, Croatia; 2014:407-416.'
apa: Vaßholz, M., & Gräßler, I. (2014). Early Analysis of the System Dynamics
of Self-Optimizing Systems. In Proceedings of the DESIGN 2014, 13th International
DESIGN Conference, Band 2 (Vol. 2, pp. 407–416). Dubrovnik, Croatia.
bibtex: '@inproceedings{Vaßholz_Gräßler_2014, place={Dubrovnik, Croatia}, title={Early
Analysis of the System Dynamics of Self-Optimizing Systems}, volume={2}, booktitle={Proceedings
of the DESIGN 2014, 13th International DESIGN Conference, Band 2}, author={Vaßholz,
Mareen and Gräßler, Iris}, year={2014}, pages={407–416} }'
chicago: Vaßholz, Mareen, and Iris Gräßler. “Early Analysis of the System Dynamics
of Self-Optimizing Systems.” In Proceedings of the DESIGN 2014, 13th International
DESIGN Conference, Band 2, 2:407–16. Dubrovnik, Croatia, 2014.
ieee: M. Vaßholz and I. Gräßler, “Early Analysis of the System Dynamics of Self-Optimizing
Systems,” in Proceedings of the DESIGN 2014, 13th International DESIGN Conference,
Band 2, 2014, vol. 2, pp. 407–416.
mla: Vaßholz, Mareen, and Iris Gräßler. “Early Analysis of the System Dynamics of
Self-Optimizing Systems.” Proceedings of the DESIGN 2014, 13th International
DESIGN Conference, Band 2, vol. 2, 2014, pp. 407–16.
short: 'M. Vaßholz, I. Gräßler, in: Proceedings of the DESIGN 2014, 13th International
DESIGN Conference, Band 2, Dubrovnik, Croatia, 2014, pp. 407–416.'
date_created: 2021-09-02T08:16:35Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
intvolume: ' 2'
language:
- iso: eng
page: 407-416
place: Dubrovnik, Croatia
publication: Proceedings of the DESIGN 2014, 13th International DESIGN Conference,
Band 2
status: public
title: Early Analysis of the System Dynamics of Self-Optimizing Systems
type: conference
user_id: '21240'
volume: 2
year: '2014'
...
---
_id: '23681'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
citation:
ama: 'Gräßler I. Principles of Agile Systems Engineering. In: Proceedings of
ECEC 2014, 21st European Concurrent Engineering Conference. Bruges, Belgium;
2014:39-44.'
apa: Gräßler, I. (2014). Principles of Agile Systems Engineering. In Proceedings
of ECEC 2014, 21st European Concurrent Engineering Conference (pp. 39–44).
Bruges, Belgium.
bibtex: '@inproceedings{Gräßler_2014, place={Bruges, Belgium}, title={Principles
of Agile Systems Engineering}, booktitle={Proceedings of ECEC 2014, 21st European
Concurrent Engineering Conference}, author={Gräßler, Iris}, year={2014}, pages={39–44}
}'
chicago: Gräßler, Iris. “Principles of Agile Systems Engineering.” In Proceedings
of ECEC 2014, 21st European Concurrent Engineering Conference, 39–44. Bruges,
Belgium, 2014.
ieee: I. Gräßler, “Principles of Agile Systems Engineering,” in Proceedings of
ECEC 2014, 21st European Concurrent Engineering Conference, 2014, pp. 39–44.
mla: Gräßler, Iris. “Principles of Agile Systems Engineering.” Proceedings of
ECEC 2014, 21st European Concurrent Engineering Conference, 2014, pp. 39–44.
short: 'I. Gräßler, in: Proceedings of ECEC 2014, 21st European Concurrent Engineering
Conference, Bruges, Belgium, 2014, pp. 39–44.'
date_created: 2021-09-02T08:18:43Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: eng
page: 39-44
place: Bruges, Belgium
publication: Proceedings of ECEC 2014, 21st European Concurrent Engineering Conference
status: public
title: Principles of Agile Systems Engineering
type: conference
user_id: '21240'
year: '2014'
...
---
_id: '23682'
abstract:
- lang: eng
text: Current production control systems cannot react appropriately to unknown situations
(e.g. the dispatch of rush jobs). They are only able to react on known situations
with a predefined behaviour. In this paper the paradigm of self-optimisation will
be transferred to the production control level by using a procedure model to design
a self-optimising production control system. The production control is then able
to react autonomously on changing operational conditions and to deduce new reaction
strategies for occurring faults or disturbances. A rule based decision model is
the core of the conceptual design. It is based on known and possible future faults
and deducts reaction strategies. Simultaneously to them, a simulation model will
be proposed, that simulates and evaluates suitable strategies.
author:
- first_name: Tobias
full_name: Mittag, Tobias
last_name: Mittag
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Peter
full_name: Iwanek, Peter
last_name: Iwanek
- first_name: Daniel
full_name: Köchling, Daniel
last_name: Köchling
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
citation:
ama: 'Mittag T, Gausemeier J, Gräßler I, Iwanek P, Köchling D, Petersen M. Conceptual
Design of a Self-Optimising Production Control System. In: Disruptive Innovation
in Manufacturing Engineering towards the 4th Industrial Revolution: Mit CD-ROM
- Proceedings of the 8th International CIRP Conference on Digital Enterprise Technology
- DET 2014, International CIRP Conference on Digital Enterprise Technology (DET),
Nr. 8. Vol 8. Fraunhofer-Institut für Arbeitswirtschaft und Organisation (IAO),
Fraunhofer Verlag; 2014.'
apa: 'Mittag, T., Gausemeier, J., Gräßler, I., Iwanek, P., Köchling, D., & Petersen,
M. (2014). Conceptual Design of a Self-Optimising Production Control System. In
Disruptive Innovation in Manufacturing Engineering towards the 4th Industrial
Revolution: mit CD-ROM - Proceedings of the 8th International CIRP Conference
on Digital Enterprise Technology - DET 2014, International CIRP Conference on
Digital Enterprise Technology (DET), Nr. 8 (Vol. 8). Fraunhofer-Institut für
Arbeitswirtschaft und Organisation (IAO), Fraunhofer Verlag.'
bibtex: '@inproceedings{Mittag_Gausemeier_Gräßler_Iwanek_Köchling_Petersen_2014,
title={Conceptual Design of a Self-Optimising Production Control System}, volume={8},
booktitle={Disruptive Innovation in Manufacturing Engineering towards the 4th
Industrial Revolution: mit CD-ROM - Proceedings of the 8th International CIRP
Conference on Digital Enterprise Technology - DET 2014, International CIRP Conference
on Digital Enterprise Technology (DET), Nr. 8}, publisher={Fraunhofer-Institut
für Arbeitswirtschaft und Organisation (IAO), Fraunhofer Verlag}, author={Mittag,
Tobias and Gausemeier, Jürgen and Gräßler, Iris and Iwanek, Peter and Köchling,
Daniel and Petersen, Marcus}, year={2014} }'
chicago: 'Mittag, Tobias, Jürgen Gausemeier, Iris Gräßler, Peter Iwanek, Daniel
Köchling, and Marcus Petersen. “Conceptual Design of a Self-Optimising Production
Control System.” In Disruptive Innovation in Manufacturing Engineering towards
the 4th Industrial Revolution: Mit CD-ROM - Proceedings of the 8th International
CIRP Conference on Digital Enterprise Technology - DET 2014, International CIRP
Conference on Digital Enterprise Technology (DET), Nr. 8, Vol. 8. Fraunhofer-Institut
für Arbeitswirtschaft und Organisation (IAO), Fraunhofer Verlag, 2014.'
ieee: 'T. Mittag, J. Gausemeier, I. Gräßler, P. Iwanek, D. Köchling, and M. Petersen,
“Conceptual Design of a Self-Optimising Production Control System,” in Disruptive
Innovation in Manufacturing Engineering towards the 4th Industrial Revolution:
mit CD-ROM - Proceedings of the 8th International CIRP Conference on Digital Enterprise
Technology - DET 2014, International CIRP Conference on Digital Enterprise Technology
(DET), Nr. 8, 2014, vol. 8.'
mla: 'Mittag, Tobias, et al. “Conceptual Design of a Self-Optimising Production
Control System.” Disruptive Innovation in Manufacturing Engineering towards
the 4th Industrial Revolution: Mit CD-ROM - Proceedings of the 8th International
CIRP Conference on Digital Enterprise Technology - DET 2014, International CIRP
Conference on Digital Enterprise Technology (DET), Nr. 8, vol. 8, Fraunhofer-Institut
für Arbeitswirtschaft und Organisation (IAO), Fraunhofer Verlag, 2014.'
short: 'T. Mittag, J. Gausemeier, I. Gräßler, P. Iwanek, D. Köchling, M. Petersen,
in: Disruptive Innovation in Manufacturing Engineering towards the 4th Industrial
Revolution: Mit CD-ROM - Proceedings of the 8th International CIRP Conference
on Digital Enterprise Technology - DET 2014, International CIRP Conference on
Digital Enterprise Technology (DET), Nr. 8, Fraunhofer-Institut für Arbeitswirtschaft
und Organisation (IAO), Fraunhofer Verlag, 2014.'
date_created: 2021-09-02T08:24:23Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
intvolume: ' 8'
language:
- iso: eng
publication: 'Disruptive Innovation in Manufacturing Engineering towards the 4th Industrial
Revolution: mit CD-ROM - Proceedings of the 8th International CIRP Conference on
Digital Enterprise Technology - DET 2014, International CIRP Conference on Digital
Enterprise Technology (DET), Nr. 8'
publication_identifier:
isbn:
- 978-3-839606-97-1
publisher: Fraunhofer-Institut für Arbeitswirtschaft und Organisation (IAO), Fraunhofer
Verlag
status: public
title: Conceptual Design of a Self-Optimising Production Control System
type: conference
user_id: '21240'
volume: 8
year: '2014'
...
---
_id: '23688'
abstract:
- lang: eng
text: "Anhand von Forschungsergebnissen aus dem Sonderforschungsbereich Transregio
30 wird dargestellt, wie Verbunde aus eigenverstärkten teilkristallinen oder hochgereckten
amorphen Folien und Gewebe für Leichtbauanwendungen hergestellt und welche Eigenschaften
erreicht werden können. Eine lokal differenzielle, thermo-mechanische Prozessführung
ist sehr effizient variierbar, und somit lassen sich gradierte Eigenschaften im
Sinne einer Funktionalisierung einstellen.\r\n\r\n"
author:
- first_name: Hans-Peter
full_name: Heim, Hans-Peter
last_name: Heim
- first_name: Angela
full_name: Ries, Angela
last_name: Ries
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: Andrea
full_name: Wibbeke, Andrea
last_name: Wibbeke
- first_name: Stefan
full_name: Turek, Stefan
last_name: Turek
- first_name: Hogenrich
full_name: Damanik, Hogenrich
last_name: Damanik
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
- first_name: Olaf
full_name: Wünsch, Olaf
last_name: Wünsch
- first_name: Ammar
full_name: Al-Baldawi, Ammar
last_name: Al-Baldawi
- first_name: Björn
full_name: Rohde, Björn
last_name: Rohde
- first_name: Angelika
full_name: Brückner-Foit, Angelika
last_name: Brückner-Foit
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
citation:
ama: Heim H-P, Ries A, Schöppner V, et al. Eigenverstärkte Thermoplastverbunde -
Verbundwerkstoffe (Teil 2). Kunststoffe 104 (3/2014). 2014:72-78.
apa: Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H.,
… Petersen, M. (2014). Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe
(Teil 2). Kunststoffe 104 (3/2014), 72–78.
bibtex: '@article{Heim_Ries_Schöppner_Wibbeke_Turek_Damanik_Mahnken_Dammann_Wünsch_Al-Baldawi_et
al._2014, title={Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil
2)}, journal={Kunststoffe 104 (3/2014)}, author={Heim, Hans-Peter and Ries, Angela
and Schöppner, Volker and Wibbeke, Andrea and Turek, Stefan and Damanik, Hogenrich
and Mahnken, Rolf and Dammann, Christian and Wünsch, Olaf and Al-Baldawi, Ammar
and et al.}, year={2014}, pages={72–78} }'
chicago: Heim, Hans-Peter, Angela Ries, Volker Schöppner, Andrea Wibbeke, Stefan
Turek, Hogenrich Damanik, Rolf Mahnken, et al. “Eigenverstärkte Thermoplastverbunde
- Verbundwerkstoffe (Teil 2).” Kunststoffe 104 (3/2014), 2014, 72–78.
ieee: H.-P. Heim et al., “Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe
(Teil 2),” Kunststoffe 104 (3/2014), pp. 72–78, 2014.
mla: Heim, Hans-Peter, et al. “Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe
(Teil 2).” Kunststoffe 104 (3/2014), 2014, pp. 72–78.
short: H.-P. Heim, A. Ries, V. Schöppner, A. Wibbeke, S. Turek, H. Damanik, R. Mahnken,
C. Dammann, O. Wünsch, A. Al-Baldawi, B. Rohde, A. Brückner-Foit, J. Gausemeier,
I. Gräßler, M. Petersen, Kunststoffe 104 (3/2014) (2014) 72–78.
date_created: 2021-09-02T11:42:34Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: ger
page: 72-78
publication: Kunststoffe 104 (3/2014)
publication_identifier:
issn:
- 0023-5563
status: public
title: Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil 2)
type: journal_article
user_id: '21240'
year: '2014'
...
---
_id: '23690'
abstract:
- lang: eng
text: Anhand von Forschungsergebnissen aus dem Sonderforschungsbereich Transregio
30 wird dargestellt, wie Verbunde aus eigenverstärkten teilkristallinen oder hochgereckten
amorphen Folien und Gewebe für Leichtbauanwendungen hergestellt und welche Eigenschaften
erreicht werden können. Eine lokal differenzielle, thermo-mechanische Prozessführung
ist sehr effizient variierbar, und somit lassen sich gradierte Eigenschaften im
Sinne einer Funktionalisierung einstellen.
author:
- first_name: Hans-Peter
full_name: Heim, Hans-Peter
last_name: Heim
- first_name: Angela
full_name: Ries, Angela
last_name: Ries
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: Andrea
full_name: Wibbeke, Andrea
last_name: Wibbeke
- first_name: Stefan
full_name: Turek, Stefan
last_name: Turek
- first_name: Hogenrich
full_name: Damanik, Hogenrich
last_name: Damanik
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
- first_name: Olaf
full_name: Wünsch, Olaf
last_name: Wünsch
- first_name: Ammar
full_name: Al-Baldawi, Ammar
last_name: Al-Baldawi
- first_name: Björn
full_name: Rohde, Björn
last_name: Rohde
- first_name: Angelika
full_name: Brückner-Foit, Angelika
last_name: Brückner-Foit
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
citation:
ama: Heim H-P, Ries A, Schöppner V, et al. Self-Reinforced Thermoplastic Composites
- Composite Materials (Part 2). Kunststoffe international 104 (3/2014).
2014:41-46.
apa: Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H.,
… Petersen, M. (2014). Self-Reinforced Thermoplastic Composites - Composite Materials
(Part 2). Kunststoffe International 104 (3/2014), 41–46.
bibtex: '@article{Heim_Ries_Schöppner_Wibbeke_Turek_Damanik_Mahnken_Dammann_Wünsch_Al-Baldawi_et
al._2014, title={Self-Reinforced Thermoplastic Composites - Composite Materials
(Part 2)}, journal={Kunststoffe international 104 (3/2014)}, author={Heim, Hans-Peter
and Ries, Angela and Schöppner, Volker and Wibbeke, Andrea and Turek, Stefan and
Damanik, Hogenrich and Mahnken, Rolf and Dammann, Christian and Wünsch, Olaf and
Al-Baldawi, Ammar and et al.}, year={2014}, pages={41–46} }'
chicago: Heim, Hans-Peter, Angela Ries, Volker Schöppner, Andrea Wibbeke, Stefan
Turek, Hogenrich Damanik, Rolf Mahnken, et al. “Self-Reinforced Thermoplastic
Composites - Composite Materials (Part 2).” Kunststoffe International 104 (3/2014),
2014, 41–46.
ieee: H.-P. Heim et al., “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 2),” Kunststoffe international 104 (3/2014), pp. 41–46,
2014.
mla: Heim, Hans-Peter, et al. “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 2).” Kunststoffe International 104 (3/2014), 2014, pp.
41–46.
short: H.-P. Heim, A. Ries, V. Schöppner, A. Wibbeke, S. Turek, H. Damanik, R. Mahnken,
C. Dammann, O. Wünsch, A. Al-Baldawi, B. Rohde, A. Brückner-Foit, J. Gausemeier,
I. Gräßler, M. Petersen, Kunststoffe International 104 (3/2014) (2014) 41–46.
date_created: 2021-09-02T11:53:01Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: eng
page: 41-46
publication: Kunststoffe international 104 (3/2014)
status: public
title: Self-Reinforced Thermoplastic Composites - Composite Materials (Part 2)
type: journal_article
user_id: '21240'
year: '2014'
...
---
_id: '23691'
abstract:
- lang: eng
text: Mit eigenverstärkten Thermoplasten ist es möglich, Verbundsysteme herzustellen,
die im Unterschied zu klassischen Faserverbundwerkstoffen keine Fremdfasern zur
Verstärkung enthalten. Stattdessen werden thermoplastische Fasern oder Bändchen
z.B. aus PP oder PE in einer identischen Matrix eingesetzt. Damit eröffnet sich
ein hohes Leichtbaupotenzial bei gleichzeitig sehr guter Rezyklierbarkeit.
author:
- first_name: Hans-Peter
full_name: Heim, Hans-Peter
last_name: Heim
- first_name: Angela
full_name: Ries, Angela
last_name: Ries
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: Andrea
full_name: Wibbeke, Andrea
last_name: Wibbeke
- first_name: Stefan
full_name: Turek, Stefan
last_name: Turek
- first_name: Hogenrich
full_name: Damanik, Hogenrich
last_name: Damanik
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
- first_name: Olaf
full_name: Wünsch, Olaf
last_name: Wünsch
- first_name: Ammar
full_name: Al-Baldawi, Ammar
last_name: Al-Baldawi
- first_name: Björn
full_name: Rohde, Björn
last_name: Rohde
- first_name: Angelika
full_name: Brückner-Foit, Angelika
last_name: Brückner-Foit
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
citation:
ama: Heim H-P, Ries A, Schöppner V, et al. Self-Reinforced Thermoplastic Composites
- Composite Materials (Part 1). Kunststoffe international 104 (2/2014).
2014:31-35.
apa: Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H.,
… Petersen, M. (2014). Self-Reinforced Thermoplastic Composites - Composite Materials
(Part 1). Kunststoffe International 104 (2/2014), 31–35.
bibtex: '@article{Heim_Ries_Schöppner_Wibbeke_Turek_Damanik_Mahnken_Dammann_Wünsch_Al-Baldawi_et
al._2014, title={Self-Reinforced Thermoplastic Composites - Composite Materials
(Part 1)}, journal={Kunststoffe international 104 (2/2014)}, author={Heim, Hans-Peter
and Ries, Angela and Schöppner, Volker and Wibbeke, Andrea and Turek, Stefan and
Damanik, Hogenrich and Mahnken, Rolf and Dammann, Christian and Wünsch, Olaf and
Al-Baldawi, Ammar and et al.}, year={2014}, pages={31–35} }'
chicago: Heim, Hans-Peter, Angela Ries, Volker Schöppner, Andrea Wibbeke, Stefan
Turek, Hogenrich Damanik, Rolf Mahnken, et al. “Self-Reinforced Thermoplastic
Composites - Composite Materials (Part 1).” Kunststoffe International 104 (2/2014),
2014, 31–35.
ieee: H.-P. Heim et al., “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 1),” Kunststoffe international 104 (2/2014), pp. 31–35,
2014.
mla: Heim, Hans-Peter, et al. “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 1).” Kunststoffe International 104 (2/2014), 2014, pp.
31–35.
short: H.-P. Heim, A. Ries, V. Schöppner, A. Wibbeke, S. Turek, H. Damanik, R. Mahnken,
C. Dammann, O. Wünsch, A. Al-Baldawi, B. Rohde, A. Brückner-Foit, J. Gausemeier,
I. Gräßler, M. Petersen, Kunststoffe International 104 (2/2014) (2014) 31–35.
date_created: 2021-09-02T11:59:17Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: eng
page: 31-35
publication: Kunststoffe international 104 (2/2014)
status: public
title: Self-Reinforced Thermoplastic Composites - Composite Materials (Part 1)
type: journal_article
user_id: '21240'
year: '2014'
...
---
_id: '23692'
abstract:
- lang: eng
text: Mit eigenverstärkten Thermoplasten ist es möglich, Verbundsysteme herzustellen,
die im Unterschied zu klassischen Faserverbundwerkstoffen keine Fremdfasern zur
Verstärkung enthalten. Stattdessen werden thermoplastische Fasern oder Bändchen
z.B. aus PP oder PE in einer identischen Matrix eingesetzt. Damit eröffnet sich
ein hohes Leichtbaupotenzial bei gleichzeitig sehr guter Rezyklierbarkeit.
author:
- first_name: Hans-Peter
full_name: Heim, Hans-Peter
last_name: Heim
- first_name: Angela
full_name: Ries, Angela
last_name: Ries
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: Andrea
full_name: Wibbeke, Andrea
last_name: Wibbeke
- first_name: Stefan
full_name: Turek, Stefan
last_name: Turek
- first_name: Hogenrich
full_name: Damanik, Hogenrich
last_name: Damanik
- first_name: Rolf
full_name: Mahnken, Rolf
last_name: Mahnken
- first_name: Christian
full_name: Dammann, Christian
last_name: Dammann
- first_name: Olaf
full_name: Wünsch, Olaf
last_name: Wünsch
- first_name: Ammar
full_name: Al-Baldawi, Ammar
last_name: Al-Baldawi
- first_name: Björn
full_name: Rohde, Björn
last_name: Rohde
- first_name: Angelika
full_name: Brückner-Foit, Angelika
last_name: Brückner-Foit
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
citation:
ama: Heim H-P, Ries A, Schöppner V, et al. Eigenverstärkte Thermoplastverbunde -
Verbundwerkstoffe (Teil 1). Kunststoffe 104 (2/2014). 2014:35-39.
apa: Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H.,
… Petersen, M. (2014). Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe
(Teil 1). Kunststoffe 104 (2/2014), 35–39.
bibtex: '@article{Heim_Ries_Schöppner_Wibbeke_Turek_Damanik_Mahnken_Dammann_Wünsch_Al-Baldawi_et
al._2014, title={Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil
1)}, journal={Kunststoffe 104 (2/2014)}, author={Heim, Hans-Peter and Ries, Angela
and Schöppner, Volker and Wibbeke, Andrea and Turek, Stefan and Damanik, Hogenrich
and Mahnken, Rolf and Dammann, Christian and Wünsch, Olaf and Al-Baldawi, Ammar
and et al.}, year={2014}, pages={35–39} }'
chicago: Heim, Hans-Peter, Angela Ries, Volker Schöppner, Andrea Wibbeke, Stefan
Turek, Hogenrich Damanik, Rolf Mahnken, et al. “Eigenverstärkte Thermoplastverbunde
- Verbundwerkstoffe (Teil 1).” Kunststoffe 104 (2/2014), 2014, 35–39.
ieee: H.-P. Heim et al., “Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe
(Teil 1),” Kunststoffe 104 (2/2014), pp. 35–39, 2014.
mla: Heim, Hans-Peter, et al. “Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe
(Teil 1).” Kunststoffe 104 (2/2014), 2014, pp. 35–39.
short: H.-P. Heim, A. Ries, V. Schöppner, A. Wibbeke, S. Turek, H. Damanik, R. Mahnken,
C. Dammann, O. Wünsch, A. Al-Baldawi, B. Rohde, A. Brückner-Foit, J. Gausemeier,
I. Gräßler, M. Petersen, Kunststoffe 104 (2/2014) (2014) 35–39.
date_created: 2021-09-02T12:04:38Z
date_updated: 2022-01-06T06:55:58Z
department:
- _id: '152'
language:
- iso: ger
page: 35-39
publication: Kunststoffe 104 (2/2014)
status: public
title: Eigenverstärkte Thermoplastverbunde - Verbundwerkstoffe (Teil 1)
type: journal_article
user_id: '21240'
year: '2014'
...
---
_id: '23834'
author:
- first_name: Nicole
full_name: Hüser, Nicole
id: '22006'
last_name: Hüser
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: Hüser N, Kenig E. A new absorption-desorption pilot plant for CO2 Capture.
Chemical Engineering Transactions. 2014;39:1417-1422. doi:10.3303/CET1439237
apa: Hüser, N., & Kenig, E. (2014). A new absorption-desorption pilot plant
for CO2 Capture. Chemical Engineering Transactions, 39, 1417–1422.
https://doi.org/10.3303/CET1439237
bibtex: '@article{Hüser_Kenig_2014, title={A new absorption-desorption pilot plant
for CO2 Capture}, volume={39}, DOI={10.3303/CET1439237},
journal={Chemical Engineering Transactions}, author={Hüser, Nicole and Kenig,
Eugeny}, year={2014}, pages={1417–1422} }'
chicago: 'Hüser, Nicole, and Eugeny Kenig. “A New Absorption-Desorption Pilot Plant
for CO2 Capture.” Chemical Engineering Transactions 39 (2014): 1417–22.
https://doi.org/10.3303/CET1439237.'
ieee: N. Hüser and E. Kenig, “A new absorption-desorption pilot plant for CO2 Capture,”
Chemical Engineering Transactions, vol. 39, pp. 1417–1422, 2014.
mla: Hüser, Nicole, and Eugeny Kenig. “A New Absorption-Desorption Pilot Plant for
CO2 Capture.” Chemical Engineering Transactions, vol. 39, 2014, pp. 1417–22,
doi:10.3303/CET1439237.
short: N. Hüser, E. Kenig, Chemical Engineering Transactions 39 (2014) 1417–1422.
date_created: 2021-09-07T08:50:24Z
date_updated: 2022-01-06T06:56:01Z
department:
- _id: '9'
- _id: '145'
doi: 10.3303/CET1439237
intvolume: ' 39'
language:
- iso: eng
page: 1417-1422
publication: Chemical Engineering Transactions
status: public
title: A new absorption-desorption pilot plant for CO2 Capture
type: journal_article
user_id: '22006'
volume: 39
year: '2014'
...
---
_id: '23878'
author:
- first_name: Nicole
full_name: Hüser, Nicole
id: '22006'
last_name: Hüser
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Hüser N, Kenig E. Konzeption und Validierung einer neuen Technikumsanlage
zur Absorption und Desorption von CO2. In: Jahrestreffen der Fachgruppen Extraktion
und Fluidverfahrenstechnik; 2014.'
apa: Hüser, N., & Kenig, E. (2014). Konzeption und Validierung einer neuen
Technikumsanlage zur Absorption und Desorption von CO2.
bibtex: '@inproceedings{Hüser_Kenig_2014, place={Fulda}, title={Konzeption und Validierung
einer neuen Technikumsanlage zur Absorption und Desorption von CO2}, publisher={Jahrestreffen
der Fachgruppen Extraktion und Fluidverfahrenstechnik}, author={Hüser, Nicole
and Kenig, Eugeny}, year={2014} }'
chicago: 'Hüser, Nicole, and Eugeny Kenig. “Konzeption Und Validierung Einer Neuen
Technikumsanlage Zur Absorption Und Desorption von CO2.” Fulda: Jahrestreffen
der Fachgruppen Extraktion und Fluidverfahrenstechnik, 2014.'
ieee: N. Hüser and E. Kenig, “Konzeption und Validierung einer neuen Technikumsanlage
zur Absorption und Desorption von CO2,” 2014.
mla: Hüser, Nicole, and Eugeny Kenig. Konzeption Und Validierung Einer Neuen
Technikumsanlage Zur Absorption Und Desorption von CO2. Jahrestreffen der
Fachgruppen Extraktion und Fluidverfahrenstechnik, 2014.
short: 'N. Hüser, E. Kenig, in: Jahrestreffen der Fachgruppen Extraktion und Fluidverfahrenstechnik,
Fulda, 2014.'
date_created: 2021-09-07T12:12:48Z
date_updated: 2022-01-06T06:56:02Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
place: Fulda
publisher: Jahrestreffen der Fachgruppen Extraktion und Fluidverfahrenstechnik
status: public
title: Konzeption und Validierung einer neuen Technikumsanlage zur Absorption und
Desorption von CO2
type: conference_abstract
user_id: '22006'
year: '2014'
...
---
_id: '22176'
abstract:
- lang: eng
text: One barrier of laser sintering (LS) to become the main process for Direct
Manufacturing (DM) is the surface quality of LS parts. Hence, the property which
has to be improved is the rough surfaces of LS parts due to the layered structure.
Another additional effect is the incomplete melting of powder particles on the
surface due to the high process temperature. In this paper we demonstrate our
approach of a theoretical model for the topography of LS part surfaces. We investigated
the surface roughness as a function of surface orientation. Considering that the
model involves further variables as layer thickness, particle density and particle
size distribution to describe the topography precisely. Experimental results were
used to optimize and check the results of the model.
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: A.A.
full_name: Herale, A.A.
last_name: Herale
- first_name: Z.
full_name: Li, Z.
last_name: Li
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Herale AA, Li Z, Schmid H-J. Simulation of the Surface Topography
on Laser Sintered Polymer Parts. In: 25th Annual International Solid Freeform
Fabrication Symposium. Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf'
apa: Delfs, P., Herale, A. A., Li, Z., & Schmid, H.-J. (2014). Simulation of
the Surface Topography on Laser Sintered Polymer Parts. In 25th Annual International
Solid Freeform Fabrication Symposium (Vol. 25, pp. 1250–1258). http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
bibtex: '@inproceedings{Delfs_Herale_Li_Schmid_2014, title={Simulation of the Surface
Topography on Laser Sintered Polymer Parts}, volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Herale, A.A. and Li, Z. and Schmid, Hans-Joachim}, year={2014}, pages={1250–1258}
}'
chicago: Delfs, Patrick, A.A. Herale, Z. Li, and Hans-Joachim Schmid. “Simulation
of the Surface Topography on Laser Sintered Polymer Parts.” In 25th Annual
International Solid Freeform Fabrication Symposium, 25:1250–58, 2014. http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
ieee: P. Delfs, A. A. Herale, Z. Li, and H.-J. Schmid, “Simulation of the Surface
Topography on Laser Sintered Polymer Parts,” in 25th Annual International Solid
Freeform Fabrication Symposium, 2014, vol. 25, pp. 1250–1258.
mla: Delfs, Patrick, et al. “Simulation of the Surface Topography on Laser Sintered
Polymer Parts.” 25th Annual International Solid Freeform Fabrication Symposium,
vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
short: 'P. Delfs, A.A. Herale, Z. Li, H.-J. Schmid, in: 25th Annual International
Solid Freeform Fabrication Symposium, 2014, pp. 1250–1258.'
date_created: 2021-05-14T07:46:05Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
intvolume: ' 25'
language:
- iso: eng
page: 1250-1258
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Simulation of the Surface Topography on Laser Sintered Polymer Parts
type: conference
user_id: '71545'
volume: 25
year: '2014'
...
---
_id: '22177'
abstract:
- lang: eng
text: An uneven temperature distribution and varying cooling rates at different
positions within the part cake are two of the most important challenges regarding
the part quality and reproducibility of the polymer laser sintering process. In
the presented work, a temperature measurement system is implemented within an
EOSINT P395 laser sintering system. It allows the determination of a three dimensional
temperature distribution and history during the full build and cooling process.
The influence of important job parameters, for example the packing density, job
height and layer thickness, can be figured out. In combination with a finite element
simulation of the cooling process, the temperature measurement will be the basis
for optimized process controls.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Schmid H-J. Three-dimensional in-process temperature measurement
of laser sintered part cakes. In: 25th Annual International Solid Freeform
Fabrication Symposium. Vol 25. ; 2014:49-58. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf'
apa: Josupeit, S., & Schmid, H.-J. (2014). Three-dimensional in-process temperature
measurement of laser sintered part cakes. In 25th Annual International Solid
Freeform Fabrication Symposium (Vol. 25, pp. 49–58). http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
bibtex: '@inproceedings{Josupeit_Schmid_2014, title={Three-dimensional in-process
temperature measurement of laser sintered part cakes}, volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Josupeit,
Stefan and Schmid, Hans-Joachim}, year={2014}, pages={49–58} }'
chicago: Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process
Temperature Measurement of Laser Sintered Part Cakes.” In 25th Annual International
Solid Freeform Fabrication Symposium, 25:49–58, 2014. http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
ieee: S. Josupeit and H.-J. Schmid, “Three-dimensional in-process temperature measurement
of laser sintered part cakes,” in 25th Annual International Solid Freeform
Fabrication Symposium, 2014, vol. 25, pp. 49–58.
mla: Josupeit, Stefan, and Hans-Joachim Schmid. “Three-Dimensional in-Process Temperature
Measurement of Laser Sintered Part Cakes.” 25th Annual International Solid
Freeform Fabrication Symposium, vol. 25, 2014, pp. 49–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf.
short: 'S. Josupeit, H.-J. Schmid, in: 25th Annual International Solid Freeform
Fabrication Symposium, 2014, pp. 49–58.'
date_created: 2021-05-14T07:46:06Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-006-Josupeit.pdf
intvolume: ' 25'
language:
- iso: eng
page: 49-58
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Three-dimensional in-process temperature measurement of laser sintered part
cakes
type: conference
user_id: '71545'
volume: 25
year: '2014'
...
---
_id: '22184'
abstract:
- lang: eng
text: Polymer laser sintering is one of the most important additive manufacturing
technologies for the tool-less production of three-dimensional prototypes and
end-use parts. In this process, parts are manufactured layerwise out of a polymer
powder by laser exposure. After the building process, these parts are located
within a loose bulk powder cake. Due to long process times and high process temperatures,
this powder ages thermally, which reduces the recyclability of the material. As
a result, mixtures of used and virgin powder ("refreshed" powder) with a mixture
ratio of approximately 50% are commonly used in the industry. The goal of this
work is to determine the exact influence of different powder ages on resulting
part quality characteristics, especially the mechanical behavior and the surface
quality. Therefore, refreshed powder with different qualities adjusted by the
melt volume rate (MVR) was processed along a defined process quality chain. To
analyze the part qualities, mechanical tensile and profilometer tests were performed.
The focus is on an application-oriented test set-up to ensure the usability of
the results in the industry. The material used is polyamide 12 (PA 2200) processed
on an EOSINT P395 laser sintering system from EOS GmbH, Krailling, Germany.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: N.
full_name: Rupp, N.
last_name: Rupp
- first_name: Monika
full_name: Gessler, Monika
last_name: Gessler
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Rüsenberg S, Rupp N, Gessler M, Schmid H-J. Thermal ageing of
polyamide 12 used for polymer laser sintering - influence on part quality characteristics.
In: 72nd Annual Technical Conference of the Society of Plastics Engineers (ANTEC
2014). Vol 72. ; 2014:2383-2385. doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics'
apa: Josupeit, S., Rüsenberg, S., Rupp, N., Gessler, M., & Schmid, H.-J. (2014).
Thermal ageing of polyamide 12 used for polymer laser sintering - influence on
part quality characteristics. In 72nd Annual Technical Conference of the Society
of Plastics Engineers (ANTEC 2014) (Vol. 72, pp. 2383–2385). https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
bibtex: '@inproceedings{Josupeit_Rüsenberg_Rupp_Gessler_Schmid_2014, title={Thermal
ageing of polyamide 12 used for polymer laser sintering - influence on part quality
characteristics}, volume={72}, DOI={https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics},
number={3}, booktitle={72nd Annual Technical Conference of the Society of Plastics
Engineers (ANTEC 2014)}, author={Josupeit, Stefan and Rüsenberg, Stefan and Rupp,
N. and Gessler, Monika and Schmid, Hans-Joachim}, year={2014}, pages={2383–2385}
}'
chicago: Josupeit, Stefan, Stefan Rüsenberg, N. Rupp, Monika Gessler, and Hans-Joachim
Schmid. “Thermal Ageing of Polyamide 12 Used for Polymer Laser Sintering - Influence
on Part Quality Characteristics.” In 72nd Annual Technical Conference of the
Society of Plastics Engineers (ANTEC 2014), 72:2383–85, 2014. https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
ieee: S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, and H.-J. Schmid, “Thermal
ageing of polyamide 12 used for polymer laser sintering - influence on part quality
characteristics,” in 72nd Annual Technical Conference of the Society of Plastics
Engineers (ANTEC 2014), 2014, vol. 72, no. 3, pp. 2383–2385.
mla: Josupeit, Stefan, et al. “Thermal Ageing of Polyamide 12 Used for Polymer Laser
Sintering - Influence on Part Quality Characteristics.” 72nd Annual Technical
Conference of the Society of Plastics Engineers (ANTEC 2014), vol. 72, no.
3, 2014, pp. 2383–85, doi:https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics.
short: 'S. Josupeit, S. Rüsenberg, N. Rupp, M. Gessler, H.-J. Schmid, in: 72nd Annual
Technical Conference of the Society of Plastics Engineers (ANTEC 2014), 2014,
pp. 2383–2385.'
date_created: 2021-05-14T07:46:14Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://www.researchgate.net/publication/283135483_Thermal_ageing_of_polyamide_12_used_for_polymer_laser_sintering_-_Influence_on_part_quality_characteristics
intvolume: ' 72'
issue: '3'
language:
- iso: eng
page: 2383-2385
publication: 72nd Annual Technical Conference of the Society of Plastics Engineers
(ANTEC 2014)
publication_identifier:
isbn:
- 978-1-634-39708-7
status: public
title: Thermal ageing of polyamide 12 used for polymer laser sintering - influence
on part quality characteristics
type: conference
user_id: '71545'
volume: 72
year: '2014'
...
---
_id: '22193'
abstract:
- lang: eng
text: The process-related occurrence of varying cooling rates at different positions
within the part cake is an important challenge regarding the part quality and
reproducibility of the polymer laser sintering process. Temperature history dependent
parameters are for example the part warpage, the crystallization behavior or powder
ageing effects, which have to be considered for optimized process controls. Nevertheless,
the inner temperature distribution and history during the cooling process is difficult
to measure and less known yet. In this work, a Finite Element (FE) model is developed
to understand and predict the temperature distribution and history within the
part cake during the cooling process. Therefore, the thermal boundary conditions
of a laser sintering system are analyzed and relevant parameters are identified.
A basic FE model is set up in ABAQUS CAE software considering a part-free powder
cake. Important thermal parameters of the bulk powder and the environment are
adjusted and verified in relation to experimental in-process measured data. With
this model it is possible to predict position-dependent cooling rates as a function
of significant job parameters, for example the job height or the environmental
conditions during the cooling phase. In combination with extended in-process temperature
measurements and a consideration of built parts, this model will be an important
tool for the development of optimized process controls.
author:
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: L.
full_name: Ordia, L.
last_name: Ordia
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Josupeit S, Ordia L, Schmid H-J. Development of a Basic Model to Simulate
the Laser Sintering Cooling Process. In: International Conference on Additive
Technologies. Vol 5. ; 2014:222-227. doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf'
apa: Josupeit, S., Ordia, L., & Schmid, H.-J. (2014). Development of a Basic
Model to Simulate the Laser Sintering Cooling Process. In International Conference
on Additive Technologies (Vol. 5, pp. 222–227). https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
bibtex: '@inproceedings{Josupeit_Ordia_Schmid_2014, title={Development of a Basic
Model to Simulate the Laser Sintering Cooling Process}, volume={5}, DOI={https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf},
booktitle={International Conference on Additive Technologies}, author={Josupeit,
Stefan and Ordia, L. and Schmid, Hans-Joachim}, year={2014}, pages={222–227} }'
chicago: Josupeit, Stefan, L. Ordia, and Hans-Joachim Schmid. “Development of a
Basic Model to Simulate the Laser Sintering Cooling Process.” In International
Conference on Additive Technologies, 5:222–27, 2014. https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
ieee: S. Josupeit, L. Ordia, and H.-J. Schmid, “Development of a Basic Model to
Simulate the Laser Sintering Cooling Process,” in International Conference
on Additive Technologies, 2014, vol. 5, pp. 222–227.
mla: Josupeit, Stefan, et al. “Development of a Basic Model to Simulate the Laser
Sintering Cooling Process.” International Conference on Additive Technologies,
vol. 5, 2014, pp. 222–27, doi:https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf.
short: 'S. Josupeit, L. Ordia, H.-J. Schmid, in: International Conference on Additive
Technologies, 2014, pp. 222–227.'
date_created: 2021-05-14T07:46:25Z
date_updated: 2022-01-06T06:55:28Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: https://www.researchgate.net/profile/Saeed_Khademzadeh2/publication/303022441_Geometrical_characterization_of_thin_walls_produced_by_micro_laser_sintering/links/5735cc7f08ae298602e08f1f/Geometrical-characterization-of-thin-walls-produced-by-micro-laser-sintering.pdf
intvolume: ' 5'
language:
- iso: eng
page: 222-227
publication: International Conference on Additive Technologies
publication_identifier:
isbn:
- 978-961-281-579-0
status: public
title: Development of a Basic Model to Simulate the Laser Sintering Cooling Process
type: conference
user_id: '71545'
volume: 5
year: '2014'
...
---
_id: '22203'
abstract:
- lang: eng
text: One barrier of laser sintering (LS) to become the main process for Direct
Manufacturing (DM) is the surface quality of LS parts. Hence, the property which
has to be improved is the rough surfaces of LS parts due to the layered structure.
Another additional effect is the incomplete melting of powder particles on the
surface due to the high process temperature. In this paper we demonstrate our
approach of a theoretical model for the topography of LS part surfaces. We investigated
the surface roughness as a function of surface orientation. Considering that the
model involves further variables as layer thickness, particle density and particle
size distribution to describe the topography precisely. Experimental results were
used to optimize and check the results of the model.
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
citation:
ama: 'Delfs P, Schmid H-J. Simulation of the Surface Topography on Laser Sintered
Polymer Parts. In: 25th Annual International Solid Freeform Fabrication Symposium.
Vol 25. ; 2014:1250-1258. doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf'
apa: Delfs, P., & Schmid, H.-J. (2014). Simulation of the Surface Topography
on Laser Sintered Polymer Parts. In 25th Annual International Solid Freeform
Fabrication Symposium (Vol. 25, pp. 1250–1258). http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
bibtex: '@inproceedings{Delfs_Schmid_2014, title={Simulation of the Surface Topography
on Laser Sintered Polymer Parts}, volume={25}, DOI={http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf},
booktitle={25th Annual International Solid Freeform Fabrication Symposium}, author={Delfs,
Patrick and Schmid, Hans-Joachim}, year={2014}, pages={1250–1258} }'
chicago: Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography
on Laser Sintered Polymer Parts.” In 25th Annual International Solid Freeform
Fabrication Symposium, 25:1250–58, 2014. http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
ieee: P. Delfs and H.-J. Schmid, “Simulation of the Surface Topography on Laser
Sintered Polymer Parts,” in 25th Annual International Solid Freeform Fabrication
Symposium, 2014, vol. 25, pp. 1250–1258.
mla: Delfs, Patrick, and Hans-Joachim Schmid. “Simulation of the Surface Topography
on Laser Sintered Polymer Parts.” 25th Annual International Solid Freeform
Fabrication Symposium, vol. 25, 2014, pp. 1250–58, doi:http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf.
short: 'P. Delfs, H.-J. Schmid, in: 25th Annual International Solid Freeform Fabrication
Symposium, 2014, pp. 1250–1258.'
date_created: 2021-05-14T07:46:36Z
date_updated: 2022-01-06T06:55:29Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: http://utw10945.utweb.utexas.edu/sites/default/files/2014-098-Delfs.pdf
intvolume: ' 25'
language:
- iso: eng
page: 1250-1258
publication: 25th Annual International Solid Freeform Fabrication Symposium
status: public
title: Simulation of the Surface Topography on Laser Sintered Polymer Parts
type: conference
user_id: '71545'
volume: 25
year: '2014'
...
---
_id: '22382'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Adam G, Zimmer D. Extension of prior developed design rules (LS). In: ASPE
- Spring Topical Meeting 2014. ; 2014. doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
'
apa: Adam, G., & Zimmer, D. (2014). Extension of prior developed design rules
(LS). In ASPE - Spring topical meeting 2014. https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
bibtex: '@inproceedings{Adam_Zimmer_2014, title={Extension of prior developed design
rules (LS)}, DOI={https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
}, booktitle={ASPE - Spring topical meeting 2014}, author={Adam, Guido and
Zimmer, Detmar}, year={2014} }'
chicago: Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules
(LS).” In ASPE - Spring Topical Meeting 2014, 2014. https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
.
ieee: G. Adam and D. Zimmer, “Extension of prior developed design rules (LS),” in
ASPE - Spring topical meeting 2014, 2014.
mla: Adam, Guido, and Detmar Zimmer. “Extension of Prior Developed Design Rules
(LS).” ASPE - Spring Topical Meeting 2014, 2014, doi:https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering
.
short: 'G. Adam, D. Zimmer, in: ASPE - Spring Topical Meeting 2014, 2014.'
date_created: 2021-06-15T11:09:06Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: 'https://www.researchgate.net/publication/274193378_Extension_of_prior_developed_design_rules%27_range_of_validity_for_different_boundary_conditions_in_laser_sintering '
language:
- iso: eng
publication: ASPE - Spring topical meeting 2014
status: public
title: Extension of prior developed design rules (LS)
type: conference
user_id: '38077'
year: '2014'
...
---
_id: '22383'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Adam G, Zimmer D. Systematic investigations of minimum feature sizes and geometrical
accuracies. In: ; 2014.'
apa: Adam, G., & Zimmer, D. (2014). Systematic investigations of minimum feature
sizes and geometrical accuracies.
bibtex: '@inproceedings{Adam_Zimmer_2014, title={Systematic investigations of minimum
feature sizes and geometrical accuracies}, author={Adam, Guido and Zimmer, Detmar},
year={2014} }'
chicago: Adam, Guido, and Detmar Zimmer. “Systematic Investigations of Minimum Feature
Sizes and Geometrical Accuracies,” 2014.
ieee: G. Adam and D. Zimmer, “Systematic investigations of minimum feature sizes
and geometrical accuracies,” 2014.
mla: Adam, Guido, and Detmar Zimmer. Systematic Investigations of Minimum Feature
Sizes and Geometrical Accuracies. 2014.
short: 'G. Adam, D. Zimmer, in: 2014.'
date_created: 2021-06-15T11:09:07Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
status: public
title: Systematic investigations of minimum feature sizes and geometrical accuracies
type: conference
user_id: '38077'
year: '2014'
...
---
_id: '22384'
abstract:
- lang: eng
text: 'Additive Manufacturing technologies create parts layer by layer. Thereby,
lots of benefits are offered. Especially extended design freedoms provide new
potentials for the design of technical parts. To make these benefits accessible
to different user groups, design rules for Additive Manufacturing were developed
within the project ‘‘Direct Manufacturing Design Rules’’. Therefore a process
independent method was defined first. Next, design rules were developed for Laser
Sintering, Laser Melting and Fused Deposition Modeling. The results were summarized
in a design rule catalog and support a suitable design for Additive Manufacturing '
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Adam G, Zimmer D. Design for Additive Manufacturing - Element transitions and
aggregated structures. CIRP Journal of Manufacturing Science and Technology.
2014;7(1):20-28. doi:10.1016/j.cirpj.2013.10.001
apa: Adam, G., & Zimmer, D. (2014). Design for Additive Manufacturing - Element
transitions and aggregated structures. CIRP Journal of Manufacturing Science
and Technology, 7(1), 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001
bibtex: '@article{Adam_Zimmer_2014, title={Design for Additive Manufacturing - Element
transitions and aggregated structures}, volume={7}, DOI={10.1016/j.cirpj.2013.10.001 }, number={1}, journal={CIRP Journal of Manufacturing
Science and Technology}, author={Adam, Guido and Zimmer, Detmar}, year={2014},
pages={20–28} }'
chicago: 'Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element
Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science
and Technology 7, no. 1 (2014): 20–28. https://doi.org/10.1016/j.cirpj.2013.10.001 .'
ieee: G. Adam and D. Zimmer, “Design for Additive Manufacturing - Element transitions
and aggregated structures,” CIRP Journal of Manufacturing Science and Technology,
vol. 7, no. 1, pp. 20–28, 2014.
mla: Adam, Guido, and Detmar Zimmer. “Design for Additive Manufacturing - Element
Transitions and Aggregated Structures.” CIRP Journal of Manufacturing Science
and Technology, vol. 7, no. 1, 2014, pp. 20–28, doi:10.1016/j.cirpj.2013.10.001 .
short: G. Adam, D. Zimmer, CIRP Journal of Manufacturing Science and Technology
7 (2014) 20–28.
date_created: 2021-06-15T11:09:08Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
doi: '10.1016/j.cirpj.2013.10.001 '
intvolume: ' 7'
issue: '1'
language:
- iso: eng
page: 20-28
publication: CIRP Journal of Manufacturing Science and Technology
status: public
title: Design for Additive Manufacturing - Element transitions and aggregated structures
type: journal_article
user_id: '38077'
volume: 7
year: '2014'
...
---
_id: '22385'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: 'Adam G. Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern.
In: ; 2014.'
apa: Adam, G. (2014). Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln
beim Lasersintern.
bibtex: '@inproceedings{Adam_2014, title={Erweiterung des Gültigkeitsbereichs von
Konstruktionsregeln beim Lasersintern}, author={Adam, Guido}, year={2014} }'
chicago: Adam, Guido. “Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln
Beim Lasersintern,” 2014.
ieee: G. Adam, “Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim
Lasersintern,” 2014.
mla: Adam, Guido. Erweiterung Des Gültigkeitsbereichs von Konstruktionsregeln
Beim Lasersintern. 2014.
short: 'G. Adam, in: 2014.'
date_created: 2021-06-15T11:09:09Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
status: public
title: Erweiterung des Gültigkeitsbereichs von Konstruktionsregeln beim Lasersintern
type: conference
user_id: '38077'
year: '2014'
...
---
_id: '22386'
author:
- first_name: Guido
full_name: Adam, Guido
last_name: Adam
citation:
ama: 'Adam G. Extension of prior developed design rules for laser sintering. In:
; 2014.'
apa: Adam, G. (2014). Extension of prior developed design rules for laser sintering.
bibtex: '@inproceedings{Adam_2014, title={Extension of prior developed design rules
for laser sintering}, author={Adam, Guido}, year={2014} }'
chicago: Adam, Guido. “Extension of Prior Developed Design Rules for Laser Sintering,”
2014.
ieee: G. Adam, “Extension of prior developed design rules for laser sintering,”
2014.
mla: Adam, Guido. Extension of Prior Developed Design Rules for Laser Sintering.
2014.
short: 'G. Adam, in: 2014.'
date_created: 2021-06-15T11:09:10Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
- _id: '219'
- _id: '624'
language:
- iso: eng
status: public
title: Extension of prior developed design rules for laser sintering
type: conference
user_id: '38077'
year: '2014'
...
---
_id: '22387'
author:
- first_name: Christian
full_name: Lessmeier, Christian
last_name: Lessmeier
- first_name: Olaf
full_name: Enge-Rosenblatt, Olaf
last_name: Enge-Rosenblatt
- first_name: Christian
full_name: Bayer, Christian
last_name: Bayer
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: 'Lessmeier C, Enge-Rosenblatt O, Bayer C, Zimmer D. Data Acquisition and Signal
Analysis from Measured Motor Currents for Defect Detection in Electromechanical
Drive Systems. In: European Conference of the PHM Society 2014 (EPHM14).
Prognostics and Health Management Society ; 2014.'
apa: Lessmeier, C., Enge-Rosenblatt, O., Bayer, C., & Zimmer, D. (2014). Data
Acquisition and Signal Analysis from Measured Motor Currents for Defect Detection
in Electromechanical Drive Systems. In European Conference of the PHM Society
2014 (EPHM14). Prognostics and Health Management Society .
bibtex: '@inproceedings{Lessmeier_Enge-Rosenblatt_Bayer_Zimmer_2014, title={Data
Acquisition and Signal Analysis from Measured Motor Currents for Defect Detection
in Electromechanical Drive Systems}, booktitle={European Conference of the PHM
Society 2014 (EPHM14)}, publisher={Prognostics and Health Management Society },
author={Lessmeier, Christian and Enge-Rosenblatt, Olaf and Bayer, Christian and
Zimmer, Detmar}, year={2014} }'
chicago: Lessmeier, Christian, Olaf Enge-Rosenblatt, Christian Bayer, and Detmar
Zimmer. “Data Acquisition and Signal Analysis from Measured Motor Currents for
Defect Detection in Electromechanical Drive Systems.” In European Conference
of the PHM Society 2014 (EPHM14). Prognostics and Health Management Society
, 2014.
ieee: C. Lessmeier, O. Enge-Rosenblatt, C. Bayer, and D. Zimmer, “Data Acquisition
and Signal Analysis from Measured Motor Currents for Defect Detection in Electromechanical
Drive Systems,” in European Conference of the PHM Society 2014 (EPHM14),
2014.
mla: Lessmeier, Christian, et al. “Data Acquisition and Signal Analysis from Measured
Motor Currents for Defect Detection in Electromechanical Drive Systems.” European
Conference of the PHM Society 2014 (EPHM14), Prognostics and Health Management
Society , 2014.
short: 'C. Lessmeier, O. Enge-Rosenblatt, C. Bayer, D. Zimmer, in: European Conference
of the PHM Society 2014 (EPHM14), Prognostics and Health Management Society ,
2014.'
date_created: 2021-06-15T11:09:12Z
date_updated: 2022-01-06T06:55:32Z
department:
- _id: '9'
- _id: '146'
language:
- iso: eng
publication: European Conference of the PHM Society 2014 (EPHM14)
publication_identifier:
isbn:
- 978-1-936263-16-5
publisher: 'Prognostics and Health Management Society '
status: public
title: Data Acquisition and Signal Analysis from Measured Motor Currents for Defect
Detection in Electromechanical Drive Systems
type: conference
user_id: '38077'
year: '2014'
...