---
_id: '9875'
abstract:
- lang: eng
text: Piezoelektrische Trägheitsmotoren nutzen die Trägheit einer bewegten Masse,
um diese über einen ununterbrochenen Reibkontakt schrittweise zu bewegen. Wegen
ihres einfachen Aufbaus und ihrer guten Miniaturisierbarkeit werden diese Motoren
zunehmend in Konsumgütern eingesetzt. Die Geschwindigkeit ist eine wichtige Motorkenngröße,
eine allgemeingültige Analyse des Motorprinzips existiert jedoch bisher nicht.Nach
einer Definition von Trägheitsmotoren werden anhand eines Modells eines translatorischen
piezoelektrischen Trägheitsmotors verschiedene idealisierte Anregungssignale hergeleitet.
Eine Analyse des Motorverhaltens zeigt, dass der verbreitete Betrieb von Trägheitsmotoren
mit Haft- und Gleitphasen für das Erreichen hoher Geschwindigkeiten ungeeignet
ist. Aus den idealisierten Signalen für den schnellen dauergleitenden Betrieb
werden frequenzbeschränkte Signale für den Betrieb mit realen Aktoren abgeleitet.
Das Verhalten bei Anregung mit diesen Signalen wird bezüglich Geschwindigkeit,
Effizienz, Haltbarkeit und Kraft verglichen. Zudem wird ein Verfahren beschrieben,
mit dem die Bewegung hochfrequent angeregter Trägheitsmotoren periodenweise berechnet
und wichtige Motorkenngrößen direkt berechnet werden können. Zur Validierung der
theoretischen Ergebnisse wird ein Versuchsmotor aufgebaut und mit unterschiedlichen
Signalen angeregt, es zeigt sich eine gute Übereinstimmung zwischen Messung und
Modell. Die Ergebnisse dieser Arbeit geben wertvolle Einblicke in die Funktion
schneller Trägheitsmotoren und sind nützlich für ihre weitere Entwicklung und
die Erweiterung ihres Einsatzbereichs.
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
citation:
ama: Hunstig M. Konzeption, Ansteuerung Und Eigenschaften Schneller Piezoelektrischer
Trägheitsmotoren. Shaker; 2014.
apa: Hunstig, M. (2014). Konzeption, Ansteuerung und Eigenschaften schneller
piezoelektrischer Trägheitsmotoren. Shaker.
bibtex: '@book{Hunstig_2014, title={Konzeption, Ansteuerung und Eigenschaften schneller
piezoelektrischer Trägheitsmotoren}, publisher={Shaker}, author={Hunstig, Matthias},
year={2014} }'
chicago: Hunstig, Matthias. Konzeption, Ansteuerung Und Eigenschaften Schneller
Piezoelektrischer Trägheitsmotoren. Shaker, 2014.
ieee: M. Hunstig, Konzeption, Ansteuerung und Eigenschaften schneller piezoelektrischer
Trägheitsmotoren. Shaker, 2014.
mla: Hunstig, Matthias. Konzeption, Ansteuerung Und Eigenschaften Schneller Piezoelektrischer
Trägheitsmotoren. Shaker, 2014.
short: M. Hunstig, Konzeption, Ansteuerung Und Eigenschaften Schneller Piezoelektrischer
Trägheitsmotoren, Shaker, 2014.
date_created: 2019-05-20T13:02:32Z
date_updated: 2023-09-15T12:29:21Z
department:
- _id: '151'
keyword:
- Tr{\
language:
- iso: eng
publisher: Shaker
status: public
title: Konzeption, Ansteuerung und Eigenschaften schneller piezoelektrischer Trägheitsmotoren
type: dissertation
user_id: '210'
year: '2014'
...
---
_id: '16130'
author:
- first_name: Nathalie
full_name: Weiß Borkowski, Nathalie
last_name: Weiß Borkowski
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Weiß Borkowski N, Marten T, Tröster T. Mehrachsige Werkstoffprüfung bei hoher
Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. In: Grellmann W, Frenz H, eds.
Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband
Werkstoffprüfung . DVM; 2014.'
apa: Weiß Borkowski, N., Marten, T., & Tröster, T. (2014). Mehrachsige Werkstoffprüfung
bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch. In W. Grellmann &
H. Frenz (Eds.), Fortschritte in der Werkstoffprüfung für Forschung und Praxis,
Tagungsband Werkstoffprüfung . DVM.
bibtex: '@inproceedings{Weiß Borkowski_Marten_Tröster_2014, place={Berlin}, title={Mehrachsige
Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch},
booktitle={Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband
Werkstoffprüfung }, publisher={DVM}, author={Weiß Borkowski, Nathalie and Marten,
Thorsten and Tröster, Thomas}, editor={Grellmann, Wolfgang and Frenz, Holger},
year={2014} }'
chicago: 'Weiß Borkowski, Nathalie, Thorsten Marten, and Thomas Tröster. “Mehrachsige
Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch.”
In Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband
Werkstoffprüfung , edited by Wolfgang Grellmann and Holger Frenz. Berlin:
DVM, 2014.'
ieee: N. Weiß Borkowski, T. Marten, and T. Tröster, “Mehrachsige Werkstoffprüfung
bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch,” in Fortschritte
in der Werkstoffprüfung für Forschung und Praxis, Tagungsband Werkstoffprüfung
, Berlin, 2014.
mla: Weiß Borkowski, Nathalie, et al. “Mehrachsige Werkstoffprüfung bei hoher Dehnrate
im Hochgeschwindigkeits-Tiefungsversuch.” Fortschritte in der Werkstoffprüfung
für Forschung und Praxis, Tagungsband Werkstoffprüfung , edited by Wolfgang
Grellmann and Holger Frenz, DVM, 2014.
short: 'N. Weiß Borkowski, T. Marten, T. Tröster, in: W. Grellmann, H. Frenz (Eds.),
Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband Werkstoffprüfung
, DVM, Berlin, 2014.'
conference:
end_date: 2014-12-05
location: Berlin
name: Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband
Werkstoffprüfung 2014
start_date: 2014-12-04
date_created: 2020-02-27T15:21:50Z
date_updated: 2026-02-16T16:13:37Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
editor:
- first_name: Wolfgang
full_name: Grellmann, Wolfgang
last_name: Grellmann
- first_name: Holger
full_name: Frenz, Holger
last_name: Frenz
language:
- iso: ger
place: Berlin
publication: 'Fortschritte in der Werkstoffprüfung für Forschung und Praxis, Tagungsband
Werkstoffprüfung '
publication_identifier:
isbn:
- '9783981451689'
publication_status: published
publisher: DVM
status: public
title: Mehrachsige Werkstoffprüfung bei hoher Dehnrate im Hochgeschwindigkeits-Tiefungsversuch
type: conference
user_id: '338'
year: '2014'
...
---
_id: '22186'
abstract:
- lang: eng
text: 'The reproducibility and reliability of quality aspects are an important challenge
of the polymer laser sintering process. However, existing quality concepts and
standardization activities considering influencing factors along the whole process
chain have not been validated experimentally yet. In this work, these factors
are analyzed and kept constant to obtain a reliable material data set for different
layer thicknesses and testing temperatures. In addition, material qualities regarding
powder ageing effects are analyzed using different build heights and layer thicknesses:
while an increase of the layer thickness reduces mechanical part strength and
density, it also results in a less intense thermal ageing of unmolten powder due
to shorter build times.'
article_number: '185374'
author:
- first_name: Stefan
full_name: Rüsenberg, Stefan
last_name: Rüsenberg
- first_name: Stefan
full_name: Josupeit, Stefan
last_name: Josupeit
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Rüsenberg S, Josupeit S, Schmid H-J. A method to characterize the quality of
a polymer laser sintering process . Advances in Mechanical Engineering.
2014;6. doi:10.1155/2014/185374
apa: Rüsenberg, S., Josupeit, S., & Schmid, H.-J. (2014). A method to characterize
the quality of a polymer laser sintering process . Advances in Mechanical Engineering,
6, Article 185374. https://doi.org/10.1155/2014/185374
bibtex: '@article{Rüsenberg_Josupeit_Schmid_2014, title={A method to characterize
the quality of a polymer laser sintering process }, volume={6}, DOI={10.1155/2014/185374},
number={185374}, journal={Advances in Mechanical Engineering}, publisher={SAGE
Publications}, author={Rüsenberg, Stefan and Josupeit, Stefan and Schmid, Hans-Joachim},
year={2014} }'
chicago: Rüsenberg, Stefan, Stefan Josupeit, and Hans-Joachim Schmid. “A Method
to Characterize the Quality of a Polymer Laser Sintering Process .” Advances
in Mechanical Engineering 6 (2014). https://doi.org/10.1155/2014/185374.
ieee: 'S. Rüsenberg, S. Josupeit, and H.-J. Schmid, “A method to characterize the
quality of a polymer laser sintering process ,” Advances in Mechanical Engineering,
vol. 6, Art. no. 185374, 2014, doi: 10.1155/2014/185374.'
mla: Rüsenberg, Stefan, et al. “A Method to Characterize the Quality of a Polymer
Laser Sintering Process .” Advances in Mechanical Engineering, vol. 6,
185374, SAGE Publications, 2014, doi:10.1155/2014/185374.
short: S. Rüsenberg, S. Josupeit, H.-J. Schmid, Advances in Mechanical Engineering
6 (2014).
date_created: 2021-05-14T07:46:17Z
date_updated: 2026-02-19T14:21:49Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
doi: 10.1155/2014/185374
intvolume: ' 6'
language:
- iso: eng
publication: Advances in Mechanical Engineering
publication_identifier:
issn:
- 1687-8140
publisher: SAGE Publications
status: public
title: 'A method to characterize the quality of a polymer laser sintering process '
type: journal_article
user_id: '14972'
volume: 6
year: '2014'
...
---
_id: '28194'
author:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Benjamin
full_name: Amshoff, Benjamin
last_name: Amshoff
citation:
ama: Gausemeier J, Amshoff B. Discursive business model development - Successful
positioning in the competitive arena through integrative development of market
performance and business. ZWF magazine for economic factory operation.
2014;109:428-434.
apa: Gausemeier, J., & Amshoff, B. (2014). Discursive business model development
- Successful positioning in the competitive arena through integrative development
of market performance and business. ZWF Magazine for Economic Factory Operation,
109, 428–434.
bibtex: '@article{Gausemeier_Amshoff_2014, title={Discursive business model development
- Successful positioning in the competitive arena through integrative development
of market performance and business}, volume={109}, journal={ZWF magazine for economic
factory operation}, author={Gausemeier, Jürgen and Amshoff, Benjamin}, year={2014},
pages={428–434} }'
chicago: 'Gausemeier, Jürgen, and Benjamin Amshoff. “Discursive Business Model Development
- Successful Positioning in the Competitive Arena through Integrative Development
of Market Performance and Business.” ZWF Magazine for Economic Factory Operation
109 (2014): 428–34.'
ieee: J. Gausemeier and B. Amshoff, “Discursive business model development - Successful
positioning in the competitive arena through integrative development of market
performance and business,” ZWF magazine for economic factory operation,
vol. 109, pp. 428–434, 2014.
mla: Gausemeier, Jürgen, and Benjamin Amshoff. “Discursive Business Model Development
- Successful Positioning in the Competitive Arena through Integrative Development
of Market Performance and Business.” ZWF Magazine for Economic Factory Operation,
vol. 109, 2014, pp. 428–34.
short: J. Gausemeier, B. Amshoff, ZWF Magazine for Economic Factory Operation 109
(2014) 428–434.
date_created: 2021-11-30T20:00:46Z
date_updated: 2026-02-24T07:52:53Z
department:
- _id: '676'
intvolume: ' 109'
language:
- iso: eng
page: 428-434
publication: ZWF magazine for economic factory operation
publication_status: published
status: public
title: Discursive business model development - Successful positioning in the competitive
arena through integrative development of market performance and business
type: journal_article
user_id: '14972'
volume: 109
year: '2014'
...
---
_id: '28101'
author:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Peter
full_name: Iwanek, Peter
last_name: Iwanek
- first_name: Mareen
full_name: Vaßholz, Mareen
last_name: Vaßholz
- first_name: Felix
full_name: Reinhart, Felix
last_name: Reinhart
citation:
ama: Gausemeier J, Iwanek P, Vaßholz M, Reinhart F. Self-optimization in mechanical
and plant engineering. Industry Management. 2014;2014/6.
apa: Gausemeier, J., Iwanek, P., Vaßholz, M., & Reinhart, F. (2014). Self-optimization
in mechanical and plant engineering. Industry Management, 2014/6.
bibtex: '@article{Gausemeier_Iwanek_Vaßholz_Reinhart_2014, title={Self-optimization
in mechanical and plant engineering}, volume={2014/6}, journal={Industry Management},
author={Gausemeier, Jürgen and Iwanek, Peter and Vaßholz, Mareen and Reinhart,
Felix}, year={2014} }'
chicago: Gausemeier, Jürgen, Peter Iwanek, Mareen Vaßholz, and Felix Reinhart. “Self-Optimization
in Mechanical and Plant Engineering.” Industry Management 2014/6 (2014).
ieee: J. Gausemeier, P. Iwanek, M. Vaßholz, and F. Reinhart, “Self-optimization
in mechanical and plant engineering,” Industry Management, vol. 2014/6,
2014.
mla: Gausemeier, Jürgen, et al. “Self-Optimization in Mechanical and Plant Engineering.”
Industry Management, vol. 2014/6, 2014.
short: J. Gausemeier, P. Iwanek, M. Vaßholz, F. Reinhart, Industry Management 2014/6
(2014).
date_created: 2021-11-30T10:20:18Z
date_updated: 2026-02-24T07:50:05Z
department:
- _id: '676'
language:
- iso: eng
publication: Industry Management
publication_status: published
status: public
title: Self-optimization in mechanical and plant engineering
type: journal_article
user_id: '14972'
volume: 2014/6
year: '2014'
...
---
_id: '28381'
abstract:
- lang: eng
text: "With self-reinforced thermoplastics, it is possible to produce composite
systems that, unlike traditional fiber composite materials, do not contain any
foreign fibers for reinforcement. Instead, thermoplastic fibers or tapes, for
example made of PP or PE, are used in an identical matrix. This opens up a high
potential for lightweight construction and, at the same time, very good recyclability.\r\n"
author:
- first_name: 'Hans-Peter '
full_name: 'Heim, Hans-Peter '
last_name: Heim
- first_name: 'Angela '
full_name: 'Ries, Angela '
last_name: Ries
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: 'Andrea '
full_name: 'Wibbeke,, Andrea '
last_name: Wibbeke,
- first_name: 'Stefan '
full_name: 'Turek, Stefan '
last_name: Turek
- first_name: ' Hogenrich'
full_name: Damanik, Hogenrich
last_name: Damanik
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: 'Christian '
full_name: 'Dammann, Christian '
last_name: Dammann
- first_name: ' Olaf'
full_name: Wünsch, Olaf
last_name: Wünsch
- first_name: Ammar
full_name: Al-Baldawi, Ammar
last_name: Al-Baldawi
- first_name: ' Björn'
full_name: ' Rohde, Björn'
last_name: ' Rohde'
- first_name: Angelika
full_name: Brückner-Foit, Angelika
last_name: Brückner-Foit
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: ' Iris'
full_name: Gräßler, Iris
last_name: Gräßler
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
citation:
ama: Heim H-P, Ries A, Schöppner V, et al. Self-Reinforced Thermoplastic Composites
- Composite Materials (Part 1). Kunststoffe international}. 2014;104:31-35.
apa: Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, Hogenrich,
Mahnken, R., Dammann, C., Wünsch, Olaf, Al-Baldawi, A., Rohde, Björn, Brückner-Foit,
A., Gausemeier, J., Gräßler, Iris, & Petersen, M. (2014). Self-Reinforced
Thermoplastic Composites - Composite Materials (Part 1). Kunststoffe International},
104, 31–35.
bibtex: '@article{Heim_Ries_Schöppner_Wibbeke,_Turek_Damanik_Mahnken_Dammann_Wünsch_Al-Baldawi_et
al._2014, title={Self-Reinforced Thermoplastic Composites - Composite Materials
(Part 1)}, volume={104}, journal={Kunststoffe international}}, author={Heim, Hans-Peter and
Ries, Angela and Schöppner, Volker and Wibbeke, Andrea and Turek, Stefan and
Damanik, Hogenrich and Mahnken, Rolf and Dammann, Christian and Wünsch, Olaf
and Al-Baldawi, Ammar and et al.}, year={2014}, pages={31–35} }'
chicago: 'Heim, Hans-Peter , Angela Ries, Volker Schöppner, Andrea Wibbeke, Stefan Turek, Hogenrich
Damanik, Rolf Mahnken, et al. “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 1).” Kunststoffe International} 104 (2014): 31–35.'
ieee: H.-P. Heim et al., “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 1),” Kunststoffe international}, vol. 104, pp. 31–35, 2014.
mla: Heim, Hans-Peter, et al. “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 1).” Kunststoffe International}, vol. 104, 2014, pp. 31–35.
short: H.-P. Heim, A. Ries, V. Schöppner, A. Wibbeke, S. Turek, Hogenrich Damanik,
R. Mahnken, C. Dammann, Olaf Wünsch, A. Al-Baldawi, Björn Rohde, A. Brückner-Foit,
J. Gausemeier, Iris Gräßler, M. Petersen, Kunststoffe International} 104 (2014)
31–35.
date_created: 2021-12-07T15:58:12Z
date_updated: 2026-02-24T07:57:25Z
department:
- _id: '676'
- _id: '9'
- _id: '154'
- _id: '321'
intvolume: ' 104'
language:
- iso: eng
page: 31-35
publication: Kunststoffe international}
publication_status: published
quality_controlled: '1'
status: public
title: Self-Reinforced Thermoplastic Composites - Composite Materials (Part 1)
type: journal_article
user_id: '14972'
volume: 104
year: '2014'
...
---
_id: '28379'
abstract:
- lang: eng
text: "Based on research results from the Collaborative Research Center Transregio
30, it is shown how composites made of self-reinforced, partially crystalline
or highly stretched amorphous foils and fabrics for lightweight construction applications
can be produced and which properties can be achieved. A locally differential,
thermo-mechanical process control can be varied very efficiently, and thus graded
properties can be set in the sense of functionalization.\r\n"
author:
- first_name: 'Hans-Peter '
full_name: 'Heim, Hans-Peter '
last_name: Heim
- first_name: 'Angela '
full_name: ' Ries, Angela '
last_name: ' Ries'
- first_name: Volker
full_name: Schöppner, Volker
last_name: Schöppner
- first_name: 'Andrea '
full_name: 'Wibbeke, Andrea '
last_name: Wibbeke
- first_name: 'Stefan '
full_name: 'Turek, Stefan '
last_name: Turek
- first_name: 'Hogenrich '
full_name: 'Damanik, Hogenrich '
last_name: Damanik
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: ' Christian '
full_name: 'Dammann, Christian '
last_name: Dammann
- first_name: ' Olaf '
full_name: 'Wünsch, Olaf '
last_name: Wünsch
- first_name: 'Ammar '
full_name: ' Al-Baldawi, Ammar '
last_name: ' Al-Baldawi'
- first_name: 'Björn '
full_name: 'Rohde, Björn '
last_name: Rohde
- first_name: Angelika
full_name: Brükner-Foit, Angelika
last_name: Brükner-Foit
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: ' Iris '
full_name: 'Gräßler, Iris '
last_name: Gräßler
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
citation:
ama: Heim H-P, Ries A, Schöppner V, et al. Self-Reinforced Thermoplastic Composites
- Composite Materials (Part 2). Kunststoffe international. Published online
2014.
apa: Heim, H.-P., Ries, A., Schöppner, V., Wibbeke, A., Turek, S., Damanik, H.,
Mahnken, R., Dammann, Christian , Wünsch, Olaf , Al-Baldawi, A., Rohde, B.,
Brükner-Foit, A., Gausemeier, J., Gräßler, Iris , & Petersen, M. (2014).
Self-Reinforced Thermoplastic Composites - Composite Materials (Part 2). Kunststoffe
International.
bibtex: '@article{Heim_ Ries_Schöppner_Wibbeke_Turek_Damanik_Mahnken_Dammann_Wünsch_
Al-Baldawi_et al._2014, title={Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 2)}, journal={Kunststoffe international}, author={Heim, Hans-Peter and Ries,
Angela and Schöppner, Volker and Wibbeke, Andrea and Turek, Stefan and Damanik,
Hogenrich and Mahnken, Rolf and Dammann, Christian and Wünsch, Olaf and Al-Baldawi,
Ammar and et al.}, year={2014} }'
chicago: Heim, Hans-Peter , Angela Ries, Volker Schöppner, Andrea Wibbeke, Stefan Turek,
Hogenrich Damanik, Rolf Mahnken, et al. “Self-Reinforced Thermoplastic Composites
- Composite Materials (Part 2).” Kunststoffe International, 2014.
ieee: H.-P. Heim et al., “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 2),” Kunststoffe international, 2014.
mla: Heim, Hans-Peter, et al. “Self-Reinforced Thermoplastic Composites - Composite
Materials (Part 2).” Kunststoffe International, 2014.
short: H.-P. Heim, A. Ries, V. Schöppner, A. Wibbeke, S. Turek, H. Damanik, R.
Mahnken, Christian Dammann, Olaf Wünsch, A. Al-Baldawi, B. Rohde, A. Brükner-Foit,
J. Gausemeier, Iris Gräßler, M. Petersen, Kunststoffe International (2014).
date_created: 2021-12-07T15:42:51Z
date_updated: 2026-02-24T07:56:12Z
department:
- _id: '676'
- _id: '9'
- _id: '154'
- _id: '321'
language:
- iso: eng
publication: Kunststoffe international
publication_status: published
quality_controlled: '1'
status: public
title: Self-Reinforced Thermoplastic Composites - Composite Materials (Part 2)
type: journal_article
user_id: '14972'
year: '2014'
...
---
_id: '28408'
author:
- first_name: Olga
full_name: Wiederkehr, Olga
last_name: Wiederkehr
- first_name: Roman
full_name: Dumitrescu, Roman
id: '16190'
last_name: Dumitrescu
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
citation:
ama: Wiederkehr O, Dumitrescu R, Gausemeier J. The development order as the basis
for a forward-looking and system-oriented product creation. Systems Engineering
Day 2014. Published online 2014.
apa: Wiederkehr, O., Dumitrescu, R., & Gausemeier, J. (2014). The development
order as the basis for a forward-looking and system-oriented product creation.
Systems Engineering Day 2014.
bibtex: '@article{Wiederkehr_Dumitrescu_Gausemeier_2014, title={The development
order as the basis for a forward-looking and system-oriented product creation},
journal={Systems Engineering Day 2014}, author={Wiederkehr, Olga and Dumitrescu,
Roman and Gausemeier, Jürgen}, year={2014} }'
chicago: Wiederkehr, Olga, Roman Dumitrescu, and Jürgen Gausemeier. “The Development
Order as the Basis for a Forward-Looking and System-Oriented Product Creation.”
Systems Engineering Day 2014, 2014.
ieee: O. Wiederkehr, R. Dumitrescu, and J. Gausemeier, “The development order as
the basis for a forward-looking and system-oriented product creation,” Systems
Engineering Day 2014, 2014.
mla: Wiederkehr, Olga, et al. “The Development Order as the Basis for a Forward-Looking
and System-Oriented Product Creation.” Systems Engineering Day 2014, 2014.
short: O. Wiederkehr, R. Dumitrescu, J. Gausemeier, Systems Engineering Day 2014
(2014).
date_created: 2021-12-07T21:15:05Z
date_updated: 2026-02-24T07:58:14Z
department:
- _id: '676'
language:
- iso: eng
publication: Systems Engineering Day 2014
publication_status: published
status: public
title: The development order as the basis for a forward-looking and system-oriented
product creation
type: journal_article
user_id: '14972'
year: '2014'
...
---
_id: '28136'
abstract:
- lang: eng
text: "In order to achieve a sustainable competitive advantage, technology-oriented
companies are more than ever asked to identify potentials of technologies for
future business at an early stage and to convert them into innovations. Emergent
technologies in particular have a high potential for radical innovations. However,
the high innovation potential is offset by high market and technology uncertainties,
which are caused by incomplete knowledge of the technology potential and development
as well as of potential application contexts. In connection with emergent technologies,
the finding of potential - i.e. the generation of knowledge regarding the potentials
- is essential, as it lays the foundation for the search for potential application
contexts. At the same time, this represents a challenge, since conventional market
research approaches only have a limited effect here. The question that arises
is how technology potentials can be derived in a discursive way. Furthermore,
we hypothesize that the TRIZ approach has great potential for this: (1) In a reversal
of the TRIZ logic, we see a way of accessing the TRIZ knowledge base via an analogy;
(2) In this way, contradictions within the meaning of TRIZ can be determined,
which can be addressed by the technology; (3) A continuous specification of the
contradictions represents a possibility to infer technology potentials. The present
article presents an approach developed at the Heinz Nixdorf Institute for a TRIZ-based
potential finding within the framework of technology-induced innovation processes.
The approach comprises the three phases of technology analysis, technology foresight
and technology potential analysis. Based on the analysis of the current performance
of the technology, the future performance is anticipated using the TRIZ development
pattern. By reversing the TRIZ logic, technology potentials are finally determined.\r\n"
author:
- first_name: Marina
full_name: Wall, Marina
last_name: Wall
- first_name: ' Jürgen'
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Stefan
full_name: Peter, Stefan
last_name: Peter
citation:
ama: Wall M, Gausemeier Jürgen, Peter S. TRIZ-based potential finding in technology-induced
innovation processes. Gausemeier J, ed. Published online 2014:95-123.
apa: Wall, M., Gausemeier, Jürgen, & Peter, S. (2014). TRIZ-based potential
finding in technology-induced innovation processes (J. Gausemeier, Ed.; pp.
95–123). publishing series of the Heinz Nixdorf Institute, Paderborn.
bibtex: '@article{Wall_Gausemeier_Peter_2014, series={Symposium for Foresight and
Technology Planning}, title={TRIZ-based potential finding in technology-induced
innovation processes}, publisher={publishing series of the Heinz Nixdorf Institute,
Paderborn}, author={Wall, Marina and Gausemeier, Jürgen and Peter, Stefan}, editor={Gausemeier,
Jürgen}, year={2014}, pages={95–123}, collection={Symposium for Foresight and
Technology Planning} }'
chicago: Wall, Marina, Jürgen Gausemeier, and Stefan Peter. “TRIZ-Based Potential
Finding in Technology-Induced Innovation Processes.” Edited by Jürgen Gausemeier.
Symposium for Foresight and Technology Planning. publishing series of the Heinz
Nixdorf Institute, Paderborn, 2014.
ieee: M. Wall, Jürgen Gausemeier, and S. Peter, “TRIZ-based potential finding in
technology-induced innovation processes.” publishing series of the Heinz Nixdorf
Institute, Paderborn, pp. 95–123, 2014.
mla: Wall, Marina, et al. TRIZ-Based Potential Finding in Technology-Induced
Innovation Processes. Edited by Jürgen Gausemeier, publishing series of the
Heinz Nixdorf Institute, Paderborn, 2014, pp. 95–123.
short: M. Wall, Jürgen Gausemeier, S. Peter, (2014) 95–123.
date_created: 2021-11-30T16:02:59Z
date_updated: 2026-02-24T14:53:42Z
department:
- _id: '676'
editor:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
language:
- iso: eng
page: 95-123
publication_status: published
publisher: publishing series of the Heinz Nixdorf Institute, Paderborn
series_title: Symposium for Foresight and Technology Planning
status: public
title: TRIZ-based potential finding in technology-induced innovation processes
type: conference
user_id: '14972'
year: '2014'
...
---
_id: '28186'
abstract:
- lang: eng
text: 'Product innovations are of great strategic importance for securing the long-term
competitiveness of companies. Often, however, companies are faced with two core
problems when introducing product innovations to the market: There is a lack of
a methodology for systematic customer integration in the product development process.
In addition, due to their complexity and the novelty of the technologies used,
the product concepts exceed the customers'' imagination. This means that customers
do not evaluate new product concepts objectively because they do not fully understand
the product benefits. In this article, a software-supported procedure for early
customer integration is presented. The core of the process is a multi-stage limit
conjoint analysis with an integrated virtual reality application.'
author:
- first_name: Klaus
full_name: Backhaus, Klaus
last_name: Backhaus
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: 'Jörg '
full_name: 'Stöcklein, Jörg '
last_name: Stöcklein
- first_name: 'Jonas '
full_name: 'Jasper, Jonas '
last_name: Jasper
- first_name: Katharina
full_name: Westhoff, Katharina
last_name: Westhoff
- first_name: Michael
full_name: Grafe, Michael
last_name: Grafe
citation:
ama: Backhaus K, Gausemeier J, Stöcklein J, Jasper J, Westhoff K, Grafe M. VR-based
conjoint analysis for the early determination of customer benefits. Published
online 2014.
apa: Backhaus, K., Gausemeier, J., Stöcklein, J., Jasper, J., Westhoff, K., &
Grafe, M. (2014). VR-based conjoint analysis for the early determination of
customer benefits. Fraunhofer IFF.
bibtex: '@article{Backhaus_Gausemeier_Stöcklein_Jasper_Westhoff_Grafe_2014, place={Magdeburg},
series={IFF Science Days}, title={VR-based conjoint analysis for the early determination
of customer benefits}, publisher={Fraunhofer IFF}, author={Backhaus, Klaus and
Gausemeier, Jürgen and Stöcklein, Jörg and Jasper, Jonas and Westhoff, Katharina
and Grafe, Michael}, year={2014}, collection={IFF Science Days} }'
chicago: 'Backhaus, Klaus, Jürgen Gausemeier, Jörg Stöcklein, Jonas Jasper, Katharina
Westhoff, and Michael Grafe. “VR-Based Conjoint Analysis for the Early Determination
of Customer Benefits.” IFF Science Days. Magdeburg: Fraunhofer IFF, 2014.'
ieee: K. Backhaus, J. Gausemeier, J. Stöcklein, J. Jasper, K. Westhoff, and M. Grafe,
“VR-based conjoint analysis for the early determination of customer benefits.”
Fraunhofer IFF, Magdeburg, 2014.
mla: Backhaus, Klaus, et al. VR-Based Conjoint Analysis for the Early Determination
of Customer Benefits. Fraunhofer IFF, 2014.
short: K. Backhaus, J. Gausemeier, J. Stöcklein, J. Jasper, K. Westhoff, M. Grafe,
(2014).
date_created: 2021-11-30T19:13:16Z
date_updated: 2026-02-24T14:55:11Z
department:
- _id: '676'
language:
- iso: eng
place: Magdeburg
publication_status: published
publisher: Fraunhofer IFF
series_title: IFF Science Days
status: public
title: VR-based conjoint analysis for the early determination of customer benefits
type: conference
user_id: '14972'
year: '2014'
...
---
_id: '28411'
author:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Benjamin
full_name: Amshoff, Benjamin
last_name: Amshoff
- first_name: Christian
full_name: Dülme, Christian
last_name: Dülme
- first_name: Martin
full_name: Kage, Martin
last_name: Kage
citation:
ama: 'Gausemeier J, Amshoff B, Dülme C, Kage M. Strategic planning of market services
in the context of Industry 4.0. In: Gausemeier J, ed. Foresight and Technology
Planning. Vol 334. Symposium for Foresight and Technology Planning. publishing
series of the Heinz Nixdorf Institute, Paderborn; 2014:6-36.'
apa: Gausemeier, J., Amshoff, B., Dülme, C., & Kage, M. (2014). Strategic planning
of market services in the context of Industry 4.0. In J. Gausemeier (Ed.), Foresight
and Technology Planning (Vol. 334, pp. 6–36). publishing series of the Heinz
Nixdorf Institute, Paderborn.
bibtex: '@inbook{Gausemeier_Amshoff_Dülme_Kage_2014, series={Symposium for Foresight
and Technology Planning}, title={Strategic planning of market services in the
context of Industry 4.0}, volume={334}, booktitle={Foresight and Technology Planning},
publisher={publishing series of the Heinz Nixdorf Institute, Paderborn}, author={Gausemeier,
Jürgen and Amshoff, Benjamin and Dülme, Christian and Kage, Martin}, editor={Gausemeier,
Jürgen}, year={2014}, pages={6–36}, collection={Symposium for Foresight and Technology
Planning} }'
chicago: Gausemeier, Jürgen, Benjamin Amshoff, Christian Dülme, and Martin Kage.
“Strategic Planning of Market Services in the Context of Industry 4.0.” In Foresight
and Technology Planning, edited by Jürgen Gausemeier, 334:6–36. Symposium
for Foresight and Technology Planning. publishing series of the Heinz Nixdorf
Institute, Paderborn, 2014.
ieee: J. Gausemeier, B. Amshoff, C. Dülme, and M. Kage, “Strategic planning of market
services in the context of Industry 4.0,” in Foresight and Technology Planning,
vol. 334, J. Gausemeier, Ed. publishing series of the Heinz Nixdorf Institute,
Paderborn, 2014, pp. 6–36.
mla: Gausemeier, Jürgen, et al. “Strategic Planning of Market Services in the Context
of Industry 4.0.” Foresight and Technology Planning, edited by Jürgen Gausemeier,
vol. 334, publishing series of the Heinz Nixdorf Institute, Paderborn, 2014, pp.
6–36.
short: 'J. Gausemeier, B. Amshoff, C. Dülme, M. Kage, in: J. Gausemeier (Ed.), Foresight
and Technology Planning, publishing series of the Heinz Nixdorf Institute, Paderborn,
2014, pp. 6–36.'
date_created: 2021-12-07T21:25:38Z
date_updated: 2026-02-24T14:43:15Z
department:
- _id: '676'
editor:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
intvolume: ' 334'
language:
- iso: eng
page: 6-36
publication: Foresight and Technology Planning
publication_status: published
publisher: publishing series of the Heinz Nixdorf Institute, Paderborn
series_title: Symposium for Foresight and Technology Planning
status: public
title: Strategic planning of market services in the context of Industry 4.0
type: book_chapter
user_id: '14972'
volume: 334
year: '2014'
...
---
_id: '28189'
abstract:
- lang: eng
text: Innovative products are based on an interdisciplinary interaction between
mechanics, electronics and information technology. The close interplay of the
specialist disciplines makes special demands on the development process. For example,
a uniform understanding of the specialists is particularly important for an efficient
development of the product and the associated production system. Furthermore,
the product concept often already determines the production system, even though
new production technologies make innovative products possible in the first place.
Therefore, the interactions between the product and the production system must
be taken into account from the start during development. Currently, the development
is mostly carried out separately in the specialist disciplines on the basis of
existing methods and systematics, who often do not fully consider the existing
interactions. Time-consuming and costly iteration loops are the result. This article
therefore addresses the interactions and mutual dependencies between the product
and the production system in the early phases of product development, such as
an adaptation of the product design due to assembly requirements. The development
process of a flashlight serves as an example. First, the interactions are described
and analyzed. A methodology is then presented that takes these interactions into
account in the context of the integrative development of product and production
system in the early phases of product development. The methodology consists of
a process model, a specification technique and a software tool. The process model
serves as a guideline for the integrative development of product and production
system, whereas the specification technology forms the core of the methodology
and enables interdisciplinary collaboration of all people involved. For the product
concept, the specification technology encompasses the aspects of the environment,
application scenarios, requirements, functions, effective structure, behavior
and design. The principle solution of the production system is represented by
the aspects of production requirements, process sequence, resources and design.
The software tool supports the developer in applying the methodology. The methodology
presented is then demonstrated using the example product. whereas the specification
technology forms the core of the methodology and enables interdisciplinary collaboration
of all people involved. For the product concept, the specification technology
encompasses the aspects of the environment, application scenarios, requirements,
functions, effective structure, behavior and design. The principle solution of
the production system is represented by the aspects of production requirements,
process sequence, resources and design. The software tool supports the developer
in applying the methodology. The methodology presented is then demonstrated using
the example product. whereas the specification technology forms the core of the
methodology and enables interdisciplinary collaboration of all people involved.
For the product concept, the specification technology encompasses the aspects
of the environment, application scenarios, requirements, functions, effective
structure, behavior and design. The principle solution of the production system
is represented by the aspects of production requirements, process sequence, resources
and design. The software tool supports the developer in applying the methodology.
The methodology presented is then demonstrated using the example product. Active
structure, behavior and shape. The principle solution of the production system
is represented by the aspects of production requirements, process sequence, resources
and design. The software tool supports the developer in applying the methodology.
The methodology presented is then demonstrated using the example product. Active
structure, behavior and shape. The principle solution of the production system
is represented by the aspects of production requirements, process sequence, resources
and design. The software tool supports the developer in applying the methodology.
The methodology presented is then demonstrated using the example product.
author:
- first_name: Marcus
full_name: Petersen, Marcus
last_name: Petersen
- first_name: Shatha
full_name: ' Bandak, Shatha'
last_name: ' Bandak'
- first_name: ' Jürgen '
full_name: 'Gausemeier, Jürgen '
last_name: Gausemeier
- first_name: ' Peter'
full_name: Iwanek, Peter
last_name: Iwanek
- first_name: Marcel
full_name: Schneider, Marcel
last_name: Schneider
citation:
ama: Petersen M, Bandak S, Gausemeier Jürgen , Iwanek Peter, Schneider M. Methodology
for reporting Interactions between product and production system in the early
phases of product development - a practical example. Schenk M, ed. Published online
2014:13-21.
apa: Petersen, M., Bandak, S., Gausemeier, Jürgen , Iwanek, Peter, & Schneider,
M. (2014). Methodology for reporting Interactions between product and production
system in the early phases of product development - a practical example (M.
Schenk, Ed.; pp. 13–21). Fraunhofer IFF.
bibtex: '@article{Petersen_ Bandak_Gausemeier_Iwanek_Schneider_2014, series={IFF
Science Days }, title={Methodology for reporting Interactions between product
and production system in the early phases of product development - a practical
example}, publisher={Fraunhofer IFF}, author={Petersen, Marcus and Bandak, Shatha
and Gausemeier, Jürgen and Iwanek, Peter and Schneider, Marcel}, editor={Schenk,
Michael}, year={2014}, pages={13–21}, collection={IFF Science Days } }'
chicago: Petersen, Marcus, Shatha Bandak, Jürgen Gausemeier, Peter Iwanek, and
Marcel Schneider. “Methodology for Reporting Interactions between Product and
Production System in the Early Phases of Product Development - a Practical Example.”
Edited by Michael Schenk. IFF Science Days . Fraunhofer IFF, 2014.
ieee: M. Petersen, S. Bandak, Jürgen Gausemeier, Peter Iwanek, and M. Schneider,
“Methodology for reporting Interactions between product and production system
in the early phases of product development - a practical example.” Fraunhofer
IFF, pp. 13–21, 2014.
mla: Petersen, Marcus, et al. Methodology for Reporting Interactions between
Product and Production System in the Early Phases of Product Development - a Practical
Example. Edited by Michael Schenk, Fraunhofer IFF, 2014, pp. 13–21.
short: M. Petersen, S. Bandak, Jürgen Gausemeier, Peter Iwanek, M. Schneider,
(2014) 13–21.
conference:
end_date: 2014-06-26
start_date: 2014-06-24
date_created: 2021-11-30T19:21:14Z
date_updated: 2026-02-24T14:59:21Z
department:
- _id: '676'
editor:
- first_name: Michael
full_name: Schenk, Michael
last_name: Schenk
language:
- iso: eng
page: 13-21
publication_identifier:
issn:
- 2196-7598
publication_status: published
publisher: Fraunhofer IFF
series_title: 'IFF Science Days '
status: public
title: Methodology for reporting Interactions between product and production system
in the early phases of product development - a practical example
type: conference
user_id: '14972'
year: '2014'
...
---
_id: '28293'
abstract:
- lang: eng
text: Functional gradation means a tailored distribution of properties over the
spatial dimensions of a component based on a complex manufacturing process chain.
The synthetisation of these processes requires a framework that generates numerous
information for the production system elaboration during the further design phases.
Therefore a production system specification technique for functionally graded
components is presented. The specification technique enables the visualisation
of the resulting process chain with all information in a descriptive manner and
offers an interface for Microsoft Visio.
author:
- first_name: ' Marcus'
full_name: Petersen, Marcus
last_name: Petersen
- first_name: Frank
full_name: Bauer, Frank
last_name: Bauer
- first_name: Stefan
full_name: Hess, Stefan
last_name: Hess
- first_name: ' Jürgen'
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: ' Iris'
full_name: Gräßler, Iris
last_name: Gräßler
citation:
ama: 'Petersen Marcus, Bauer F, Hess S, Gausemeier Jürgen, Gräßler Iris. Towards
a Production System Specification Technique for Functionally Graded Components.
In: Proceedings of the DESIGN 2014 - 13th International DESIGN Conference .
Vol 2. International DESIGN Conference. Faculty of Mechanical Engineering and
Naval Architecture, University of Zagreb / The Design Society, Glasgow; 2014:1157-1166.'
apa: Petersen, Marcus, Bauer, F., Hess, S., Gausemeier, Jürgen, & Gräßler, Iris.
(2014). Towards a Production System Specification Technique for Functionally Graded
Components. Proceedings of the DESIGN 2014 - 13th International DESIGN Conference
, 2, 1157–1166.
bibtex: '@inproceedings{Petersen_Bauer_Hess_Gausemeier_Gräßler_2014, series={International
DESIGN Conference}, title={Towards a Production System Specification Technique
for Functionally Graded Components}, volume={2}, booktitle={Proceedings of the
DESIGN 2014 - 13th International DESIGN Conference }, publisher={Faculty of Mechanical
Engineering and Naval Architecture, University of Zagreb / The Design Society,
Glasgow}, author={Petersen, Marcus and Bauer, Frank and Hess, Stefan and Gausemeier, Jürgen
and Gräßler, Iris}, year={2014}, pages={1157–1166}, collection={International
DESIGN Conference} }'
chicago: Petersen, Marcus, Frank Bauer, Stefan Hess, Jürgen Gausemeier, and Iris
Gräßler. “Towards a Production System Specification Technique for Functionally
Graded Components.” In Proceedings of the DESIGN 2014 - 13th International
DESIGN Conference , 2:1157–66. International DESIGN Conference. Faculty of
Mechanical Engineering and Naval Architecture, University of Zagreb / The Design
Society, Glasgow, 2014.
ieee: Marcus Petersen, F. Bauer, S. Hess, Jürgen Gausemeier, and Iris Gräßler,
“Towards a Production System Specification Technique for Functionally Graded Components,”
in Proceedings of the DESIGN 2014 - 13th International DESIGN Conference ,
2014, vol. 2, pp. 1157–1166.
mla: Petersen, Marcus, et al. “Towards a Production System Specification Technique
for Functionally Graded Components.” Proceedings of the DESIGN 2014 - 13th
International DESIGN Conference , vol. 2, Faculty of Mechanical Engineering
and Naval Architecture, University of Zagreb / The Design Society, Glasgow, 2014,
pp. 1157–66.
short: 'Marcus Petersen, F. Bauer, S. Hess, Jürgen Gausemeier, Iris Gräßler, in:
Proceedings of the DESIGN 2014 - 13th International DESIGN Conference , Faculty
of Mechanical Engineering and Naval Architecture, University of Zagreb / The Design
Society, Glasgow, 2014, pp. 1157–1166.'
conference:
end_date: 2014-05-22
start_date: 2014-05-19
date_created: 2021-12-05T11:03:33Z
date_updated: 2026-02-24T15:00:54Z
department:
- _id: '676'
intvolume: ' 2'
language:
- iso: eng
page: 1157-1166
publication: 'Proceedings of the DESIGN 2014 - 13th International DESIGN Conference '
publication_identifier:
issn:
- 1847-9073
publication_status: published
publisher: Faculty of Mechanical Engineering and Naval Architecture, University of
Zagreb / The Design Society, Glasgow
series_title: International DESIGN Conference
status: public
title: Towards a Production System Specification Technique for Functionally Graded
Components
type: conference
user_id: '14972'
volume: 2
year: '2014'
...
---
_id: '62785'
abstract:
- lang: eng
text: SUMMARYWe introduce a material model for
the simulation of polycrystalline materials undergoing solid‐to‐solid phase‐transformations.
As a basis, we present a scalar‐valued phase‐transformation model where a Helmholtz
free energy function depending on volumetric and deviatoric strain measures is
assigned to each phase. The analysis of the related overall Gibbs energy density
allows for the calculation of energy barriers. With these quantities at hand,
we use a statistical‐physics‐based approach to determine the resulting evolution
of volume fractions. Though the model facilitates to take into account an arbitrary
number of solid phases of the underlying material, we restrict this work to the
simulation of phase‐transformations between an austenitic parent phase and a martensitic
tension and compression phase. The scalar model is embedded into a computational
micro‐sphere formulation in view of the simulation of three‐dimensional boundary
value problems. The final modelling approach necessary for macroscopic simulations
is accomplished by a finite element formulation, where the local material behaviour
at each integration point is governed by the response of the micro‐sphere model.Copyright
© 2014 John Wiley & Sons, Ltd.
author:
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Thorsten
full_name: Bartel, Thorsten
last_name: Bartel
- first_name: Andreas
full_name: Menzel, Andreas
last_name: Menzel
citation:
ama: Ostwald R, Bartel T, Menzel A. A Gibbs‐energy‐barrier‐based computational micro‐sphere
model for the simulation of martensitic phase‐transformations. International
Journal for Numerical Methods in Engineering. 2014;97(12):851-877. doi:10.1002/nme.4601
apa: Ostwald, R., Bartel, T., & Menzel, A. (2014). A Gibbs‐energy‐barrier‐based
computational micro‐sphere model for the simulation of martensitic phase‐transformations.
International Journal for Numerical Methods in Engineering, 97(12),
851–877. https://doi.org/10.1002/nme.4601
bibtex: '@article{Ostwald_Bartel_Menzel_2014, title={A Gibbs‐energy‐barrier‐based
computational micro‐sphere model for the simulation of martensitic phase‐transformations},
volume={97}, DOI={10.1002/nme.4601},
number={12}, journal={International Journal for Numerical Methods in Engineering},
publisher={Wiley}, author={Ostwald, Richard and Bartel, Thorsten and Menzel, Andreas},
year={2014}, pages={851–877} }'
chicago: 'Ostwald, Richard, Thorsten Bartel, and Andreas Menzel. “A Gibbs‐energy‐barrier‐based
Computational Micro‐sphere Model for the Simulation of Martensitic Phase‐transformations.”
International Journal for Numerical Methods in Engineering 97, no. 12 (2014):
851–77. https://doi.org/10.1002/nme.4601.'
ieee: 'R. Ostwald, T. Bartel, and A. Menzel, “A Gibbs‐energy‐barrier‐based computational
micro‐sphere model for the simulation of martensitic phase‐transformations,” International
Journal for Numerical Methods in Engineering, vol. 97, no. 12, pp. 851–877,
2014, doi: 10.1002/nme.4601.'
mla: Ostwald, Richard, et al. “A Gibbs‐energy‐barrier‐based Computational Micro‐sphere
Model for the Simulation of Martensitic Phase‐transformations.” International
Journal for Numerical Methods in Engineering, vol. 97, no. 12, Wiley, 2014,
pp. 851–77, doi:10.1002/nme.4601.
short: R. Ostwald, T. Bartel, A. Menzel, International Journal for Numerical Methods
in Engineering 97 (2014) 851–877.
date_created: 2025-12-03T13:13:55Z
date_updated: 2025-12-03T13:14:32Z
department:
- _id: '952'
- _id: '321'
doi: 10.1002/nme.4601
intvolume: ' 97'
issue: '12'
language:
- iso: eng
page: 851-877
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
issn:
- 0029-5981
- 1097-0207
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: A Gibbs‐energy‐barrier‐based computational micro‐sphere model for the simulation
of martensitic phase‐transformations
type: journal_article
user_id: '85414'
volume: 97
year: '2014'
...
---
_id: '62786'
author:
- first_name: Richard
full_name: Ostwald, Richard
id: '106876'
last_name: Ostwald
orcid: 0000-0003-2147-8444
- first_name: Marcel
full_name: Tiffe, Marcel
last_name: Tiffe
- first_name: Thorsten
full_name: Bartel, Thorsten
last_name: Bartel
- first_name: Andreas
full_name: Zabel, Andreas
last_name: Zabel
- first_name: Andreas
full_name: Menzel, Andreas
last_name: Menzel
- first_name: Dirk
full_name: Biermann, Dirk
last_name: Biermann
citation:
ama: 'Ostwald R, Tiffe M, Bartel T, Zabel A, Menzel A, Biermann D. Towards the multi-scale
simulation of martensitic phase-transformations: An efficient post-processing
approach applied to turning processes. Journal of Materials Processing Technology.
2014;214(8):1516-1523. doi:10.1016/j.jmatprotec.2014.02.022'
apa: 'Ostwald, R., Tiffe, M., Bartel, T., Zabel, A., Menzel, A., & Biermann,
D. (2014). Towards the multi-scale simulation of martensitic phase-transformations:
An efficient post-processing approach applied to turning processes. Journal
of Materials Processing Technology, 214(8), 1516–1523. https://doi.org/10.1016/j.jmatprotec.2014.02.022'
bibtex: '@article{Ostwald_Tiffe_Bartel_Zabel_Menzel_Biermann_2014, title={Towards
the multi-scale simulation of martensitic phase-transformations: An efficient
post-processing approach applied to turning processes}, volume={214}, DOI={10.1016/j.jmatprotec.2014.02.022},
number={8}, journal={Journal of Materials Processing Technology}, publisher={Elsevier
BV}, author={Ostwald, Richard and Tiffe, Marcel and Bartel, Thorsten and Zabel,
Andreas and Menzel, Andreas and Biermann, Dirk}, year={2014}, pages={1516–1523}
}'
chicago: 'Ostwald, Richard, Marcel Tiffe, Thorsten Bartel, Andreas Zabel, Andreas
Menzel, and Dirk Biermann. “Towards the Multi-Scale Simulation of Martensitic
Phase-Transformations: An Efficient Post-Processing Approach Applied to Turning
Processes.” Journal of Materials Processing Technology 214, no. 8 (2014):
1516–23. https://doi.org/10.1016/j.jmatprotec.2014.02.022.'
ieee: 'R. Ostwald, M. Tiffe, T. Bartel, A. Zabel, A. Menzel, and D. Biermann, “Towards
the multi-scale simulation of martensitic phase-transformations: An efficient
post-processing approach applied to turning processes,” Journal of Materials
Processing Technology, vol. 214, no. 8, pp. 1516–1523, 2014, doi: 10.1016/j.jmatprotec.2014.02.022.'
mla: 'Ostwald, Richard, et al. “Towards the Multi-Scale Simulation of Martensitic
Phase-Transformations: An Efficient Post-Processing Approach Applied to Turning
Processes.” Journal of Materials Processing Technology, vol. 214, no. 8,
Elsevier BV, 2014, pp. 1516–23, doi:10.1016/j.jmatprotec.2014.02.022.'
short: R. Ostwald, M. Tiffe, T. Bartel, A. Zabel, A. Menzel, D. Biermann, Journal
of Materials Processing Technology 214 (2014) 1516–1523.
date_created: 2025-12-03T13:15:00Z
date_updated: 2025-12-03T13:15:39Z
department:
- _id: '952'
- _id: '321'
doi: 10.1016/j.jmatprotec.2014.02.022
intvolume: ' 214'
issue: '8'
language:
- iso: eng
page: 1516-1523
publication: Journal of Materials Processing Technology
publication_identifier:
issn:
- 0924-0136
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'Towards the multi-scale simulation of martensitic phase-transformations: An
efficient post-processing approach applied to turning processes'
type: journal_article
user_id: '85414'
volume: 214
year: '2014'
...
---
_id: '52441'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: Schlüter A. Energieeffizienter produzieren - Querschnitthemen und systemische
Ansätze. Talk.; 2014.
apa: Schlüter, A. (2014). Energieeffizienter produzieren - Querschnitthemen und
systemische Ansätze. Talk.
bibtex: '@book{Schlüter_2014, place={Mainau Island}, title={Energieeffizienter produzieren
- Querschnitthemen und systemische Ansätze. Talk}, author={Schlüter, Alexander},
year={2014} }'
chicago: Schlüter, Alexander. Energieeffizienter produzieren - Querschnitthemen
und systemische Ansätze. Talk. Mainau Island, 2014.
ieee: A. Schlüter, Energieeffizienter produzieren - Querschnitthemen und systemische
Ansätze. Talk. Mainau Island, 2014.
mla: Schlüter, Alexander. Energieeffizienter produzieren - Querschnitthemen und
systemische Ansätze. Talk. 2014.
short: A. Schlüter, Energieeffizienter produzieren - Querschnitthemen und systemische
Ansätze. Talk, Mainau Island, 2014.
date_created: 2024-03-10T08:27:38Z
date_updated: 2025-04-01T08:12:04Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: ger
place: Mainau Island
status: public
title: Energieeffizienter produzieren - Querschnitthemen und systemische Ansätze.
Talk
type: misc
user_id: '22833'
year: '2014'
...
---
_id: '52423'
application_date: 19.02.2014
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
- first_name: Benjamin
full_name: Rommel, Benjamin
last_name: Rommel
- first_name: Jens
full_name: Hesselbach, Jens
last_name: Hesselbach
- first_name: Heiko
full_name: Dunkelberg, Heiko
last_name: Dunkelberg
citation:
ama: Schlüter A, Rommel B, Hesselbach J, Dunkelberg H. Vorrichtung zur Temperierung
eines Extruders oder eines Plastifizierzylinders. Published online 2014.
apa: Schlüter, A., Rommel, B., Hesselbach, J., & Dunkelberg, H. (2014). Vorrichtung
zur Temperierung eines Extruders oder eines Plastifizierzylinders.
bibtex: '@article{Schlüter_Rommel_Hesselbach_Dunkelberg_2014, title={Vorrichtung
zur Temperierung eines Extruders oder eines Plastifizierzylinders}, author={Schlüter,
Alexander and Rommel, Benjamin and Hesselbach, Jens and Dunkelberg, Heiko}, year={2014}
}'
chicago: Schlüter, Alexander, Benjamin Rommel, Jens Hesselbach, and Heiko Dunkelberg.
“Vorrichtung Zur Temperierung Eines Extruders Oder Eines Plastifizierzylinders,”
2014.
ieee: A. Schlüter, B. Rommel, J. Hesselbach, and H. Dunkelberg, “Vorrichtung zur
Temperierung eines Extruders oder eines Plastifizierzylinders.” 2014.
mla: Schlüter, Alexander, et al. Vorrichtung Zur Temperierung Eines Extruders
Oder Eines Plastifizierzylinders. 2014.
short: A. Schlüter, B. Rommel, J. Hesselbach, H. Dunkelberg, (2014).
date_created: 2024-03-09T11:29:13Z
date_updated: 2025-04-01T08:25:11Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
ipc: B29C 48/78 (2019.01)
ipn: WO 2016/169575 A1
publication_date: 20.08.2015
status: public
title: Vorrichtung zur Temperierung eines Extruders oder eines Plastifizierzylinders
type: patent
user_id: '22833'
year: '2014'
...
---
_id: '52440'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: Schlüter A. Increasing Energy Efficiency in the Industry - Steps and Examples.
Talk. German Federal Ministry of Economic Affairs (BMWi); 2014.
apa: Schlüter, A. (2014). Increasing Energy Efficiency in the Industry - Steps
and Examples. Talk. German Federal Ministry of Economic Affairs (BMWi).
bibtex: '@book{Schlüter_2014, place={Tampere (FIN)}, title={Increasing Energy Efficiency
in the Industry - Steps and Examples. Talk}, publisher={German Federal Ministry
of Economic Affairs (BMWi)}, author={Schlüter, Alexander}, year={2014} }'
chicago: 'Schlüter, Alexander. Increasing Energy Efficiency in the Industry -
Steps and Examples. Talk. Tampere (FIN): German Federal Ministry of Economic
Affairs (BMWi), 2014.'
ieee: 'A. Schlüter, Increasing Energy Efficiency in the Industry - Steps and
Examples. Talk. Tampere (FIN): German Federal Ministry of Economic Affairs
(BMWi), 2014.'
mla: Schlüter, Alexander. Increasing Energy Efficiency in the Industry - Steps
and Examples. Talk. German Federal Ministry of Economic Affairs (BMWi), 2014.
short: A. Schlüter, Increasing Energy Efficiency in the Industry - Steps and Examples.
Talk, German Federal Ministry of Economic Affairs (BMWi), Tampere (FIN), 2014.
date_created: 2024-03-10T08:25:28Z
date_updated: 2025-04-01T08:30:16Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: eng
place: Tampere (FIN)
publisher: German Federal Ministry of Economic Affairs (BMWi)
status: public
title: Increasing Energy Efficiency in the Industry - Steps and Examples. Talk
type: misc
user_id: '22833'
year: '2014'
...
---
_id: '52439'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: Schlüter A. Utilisation of Waste Heat and Heat Recovery in the Industry.
Talk. German Federal Ministry of Economic Affairs (BMWi); 2014.
apa: Schlüter, A. (2014). Utilisation of Waste Heat and Heat Recovery in the
Industry. Talk. German Federal Ministry of Economic Affairs (BMWi).
bibtex: '@book{Schlüter_2014, place={Frankfurt a.M.}, title={Utilisation of Waste
Heat and Heat Recovery in the Industry. Talk}, publisher={German Federal Ministry
of Economic Affairs (BMWi)}, author={Schlüter, Alexander}, year={2014} }'
chicago: 'Schlüter, Alexander. Utilisation of Waste Heat and Heat Recovery in
the Industry. Talk. Frankfurt a.M.: German Federal Ministry of Economic Affairs
(BMWi), 2014.'
ieee: 'A. Schlüter, Utilisation of Waste Heat and Heat Recovery in the Industry.
Talk. Frankfurt a.M.: German Federal Ministry of Economic Affairs (BMWi),
2014.'
mla: Schlüter, Alexander. Utilisation of Waste Heat and Heat Recovery in the
Industry. Talk. German Federal Ministry of Economic Affairs (BMWi), 2014.
short: A. Schlüter, Utilisation of Waste Heat and Heat Recovery in the Industry.
Talk, German Federal Ministry of Economic Affairs (BMWi), Frankfurt a.M., 2014.
date_created: 2024-03-10T08:23:57Z
date_updated: 2025-04-01T08:30:00Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: eng
place: Frankfurt a.M.
publisher: German Federal Ministry of Economic Affairs (BMWi)
status: public
title: Utilisation of Waste Heat and Heat Recovery in the Industry. Talk
type: misc
user_id: '22833'
year: '2014'
...
---
_id: '52442'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: Schlüter A. Energy Efficiency in Production Areas. Talk,. German Federal
Ministry of Economic Affairs (BMWi); 2014.
apa: Schlüter, A. (2014). Energy Efficiency in Production Areas. Talk,. German
Federal Ministry of Economic Affairs (BMWi).
bibtex: '@book{Schlüter_2014, place={Stockholm}, title={Energy Efficiency in Production
Areas. Talk,}, publisher={German Federal Ministry of Economic Affairs (BMWi)},
author={Schlüter, Alexander}, year={2014} }'
chicago: 'Schlüter, Alexander. Energy Efficiency in Production Areas. Talk,.
Stockholm: German Federal Ministry of Economic Affairs (BMWi), 2014.'
ieee: 'A. Schlüter, Energy Efficiency in Production Areas. Talk,. Stockholm:
German Federal Ministry of Economic Affairs (BMWi), 2014.'
mla: Schlüter, Alexander. Energy Efficiency in Production Areas. Talk,. German
Federal Ministry of Economic Affairs (BMWi), 2014.
short: A. Schlüter, Energy Efficiency in Production Areas. Talk, German Federal
Ministry of Economic Affairs (BMWi), Stockholm, 2014.
date_created: 2024-03-10T08:29:53Z
date_updated: 2025-04-01T08:30:27Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: eng
place: Stockholm
publisher: German Federal Ministry of Economic Affairs (BMWi)
status: public
title: Energy Efficiency in Production Areas. Talk,
type: misc
user_id: '22833'
year: '2014'
...