---
_id: '56956'
author:
- first_name: Asif
full_name: Iqbal, Asif
last_name: Iqbal
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
citation:
ama: 'Iqbal A, Neukötter M. Introduction to Uniaxially Elongated Polymer Blends:
Instability Due to Particles (Project-Based Course).; 2024.'
apa: 'Iqbal, A., & Neukötter, M. (2024). Introduction to Uniaxially Elongated
Polymer Blends: Instability due to Particles (Project-based course).'
bibtex: '@book{Iqbal_Neukötter_2024, title={Introduction to Uniaxially Elongated
Polymer Blends: Instability due to Particles (Project-based course)}, author={Iqbal,
Asif and Neukötter, Moritz}, year={2024} }'
chicago: 'Iqbal, Asif, and Moritz Neukötter. Introduction to Uniaxially Elongated
Polymer Blends: Instability Due to Particles (Project-Based Course), 2024.'
ieee: 'A. Iqbal and M. Neukötter, Introduction to Uniaxially Elongated Polymer
Blends: Instability due to Particles (Project-based course). 2024.'
mla: 'Iqbal, Asif, and Moritz Neukötter. Introduction to Uniaxially Elongated
Polymer Blends: Instability Due to Particles (Project-Based Course). 2024.'
short: 'A. Iqbal, M. Neukötter, Introduction to Uniaxially Elongated Polymer Blends:
Instability Due to Particles (Project-Based Course), 2024.'
date_created: 2024-11-08T09:04:54Z
date_updated: 2024-11-08T09:04:57Z
department:
- _id: '9'
- _id: '150'
language:
- iso: eng
status: public
supervisor:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
title: 'Introduction to Uniaxially Elongated Polymer Blends: Instability due to Particles
(Project-based course)'
type: mastersthesis
user_id: '45530'
year: '2024'
...
---
_id: '56954'
author:
- first_name: 'Vincent '
full_name: 'Schnückel, Vincent '
last_name: Schnückel
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
citation:
ama: Schnückel V, Neukötter M. Automatisierte Filament- und Tropfenauswertung
von viskoelastischen Polymerlösungen und -schmelzen in uniaxialer Dehnung (Studienarbeit).;
2024.
apa: Schnückel, V., & Neukötter, M. (2024). Automatisierte Filament- und
Tropfenauswertung von viskoelastischen Polymerlösungen und -schmelzen in uniaxialer
Dehnung (Studienarbeit).
bibtex: '@book{Schnückel_Neukötter_2024, title={Automatisierte Filament- und Tropfenauswertung
von viskoelastischen Polymerlösungen und -schmelzen in uniaxialer Dehnung (Studienarbeit)},
author={Schnückel, Vincent and Neukötter, Moritz}, year={2024} }'
chicago: Schnückel, Vincent , and Moritz Neukötter. Automatisierte Filament-
und Tropfenauswertung von viskoelastischen Polymerlösungen und -schmelzen in uniaxialer
Dehnung (Studienarbeit), 2024.
ieee: V. Schnückel and M. Neukötter, Automatisierte Filament- und Tropfenauswertung
von viskoelastischen Polymerlösungen und -schmelzen in uniaxialer Dehnung (Studienarbeit).
2024.
mla: Schnückel, Vincent, and Moritz Neukötter. Automatisierte Filament- und Tropfenauswertung
von viskoelastischen Polymerlösungen und -schmelzen in uniaxialer Dehnung (Studienarbeit).
2024.
short: V. Schnückel, M. Neukötter, Automatisierte Filament- und Tropfenauswertung
von viskoelastischen Polymerlösungen und -schmelzen in uniaxialer Dehnung (Studienarbeit),
2024.
date_created: 2024-11-08T08:58:30Z
date_updated: 2024-11-08T09:16:22Z
department:
- _id: '9'
- _id: '150'
language:
- iso: ger
status: public
supervisor:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
title: Automatisierte Filament- und Tropfenauswertung von viskoelastischen Polymerlösungen
und -schmelzen in uniaxialer Dehnung (Studienarbeit)
type: mastersthesis
user_id: '45530'
year: '2024'
...
---
_id: '56952'
author:
- first_name: Nick
full_name: Aulbur, Nick
last_name: Aulbur
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
citation:
ama: Aulbur N, Neukötter M. Charakterisierung des Verhaltens verschiedener Fluide
im Filament Extension Atomizer.; 2024.
apa: Aulbur, N., & Neukötter, M. (2024). Charakterisierung des Verhaltens
verschiedener Fluide im Filament Extension Atomizer.
bibtex: '@book{Aulbur_Neukötter_2024, title={Charakterisierung des Verhaltens verschiedener
Fluide im Filament Extension Atomizer}, author={Aulbur, Nick and Neukötter, Moritz},
year={2024} }'
chicago: Aulbur, Nick, and Moritz Neukötter. Charakterisierung des Verhaltens
verschiedener Fluide im Filament Extension Atomizer, 2024.
ieee: N. Aulbur and M. Neukötter, Charakterisierung des Verhaltens verschiedener
Fluide im Filament Extension Atomizer. 2024.
mla: Aulbur, Nick, and Moritz Neukötter. Charakterisierung des Verhaltens verschiedener
Fluide im Filament Extension Atomizer. 2024.
short: N. Aulbur, M. Neukötter, Charakterisierung des Verhaltens verschiedener Fluide
im Filament Extension Atomizer, 2024.
date_created: 2024-11-08T08:54:11Z
date_updated: 2024-11-08T09:16:13Z
department:
- _id: '9'
- _id: '150'
language:
- iso: ger
status: public
supervisor:
- first_name: Moritz
full_name: Neukötter, Moritz
id: '45530'
last_name: Neukötter
orcid: 0000-0001-9101-8828
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Steffen
full_name: Jesinghausen, Steffen
id: '3959'
last_name: Jesinghausen
orcid: https://orcid.org/0000-0003-2611-5298
title: Charakterisierung des Verhaltens verschiedener Fluide im Filament Extension
Atomizer
type: bachelorsthesis
user_id: '45530'
year: '2024'
...
---
_id: '58164'
abstract:
- lang: ger
text: Der modellbasierte Regelungsentwurf erfordert eine möglichst genaue Kenntnis
über das dynamische Verhalten des zugrunde liegenden physikalischen Systems. Durch
maschinelle Lernverfahren besteht das Potenzial den Modellierungsaufwand im Vergleich
zum klassischen Vorgehen zu reduzieren, indem physikalisches Vorwissen und an
Messdaten trainierte Modelle effektiv zusammengeführt werden. Diese Dissertation
entwickelt Methoden zur datengetriebenen Bestimmung von Modellen für den Regelungsentwurf
nichtlinearer mechatronischer Systeme. Dazu wird die regelungstechnische Anwendbarkeit
von Koopman-Operator-basierten Verfahren analysiert, die nichtlineare Dynamiken
durch lineare Modelle approximieren. Darüber hinaus wird ein neuartiges Verfahren
zur datengetriebenen Bestimmung von Port-Hamilton-Modellen entwickelt, die Energiezusammenhänge
plausibel abbilden und sich unmittelbar für einen passivitätsbasierten Regelungsentwurf
verwenden lassen. Zudem werden Ansätze zur automatischen Aktualisierung des im
Regelkreis verwendeten Streckenmodells bei Modellunsicherheiten oder auftretenden
Veränderungen der Systemdynamik vorgestellt. Experimentelle sowie simulative Untersuchungen
demonstrieren die herausragende Prädiktionsgenauigkeit der datengetriebenen Modelle
und die hohe Regelgüte. Die Ergebnisse dieser Dissertation leisten einen bedeutenden
Beitrag, weil die datengetriebenen Modelle eine aus regelungstechnischer Sicht
verwertbare Form aufweisen. Sie sind physikalisch interpretierbar und lassen sich
nahtlos in bestehende Analyse- und Entwurfsmethoden einbinden. Dies eröffnet neue
Perspektiven für zukünftige Anwendungen und Weiterentwicklungen.
- lang: eng
text: Model-based control design requires accurate insight into the dynamic behavior
of the underlying physical system. Machine learning methods have the potential
to reduce modeling efforts compared to the classic approach by effectively combining
physical prior knowledge and models trained on measurement data. This dissertation
develops methods to determine data-driven models for the control design of nonlinear
mechatronic systems. For this purpose, the control applicability of Koopman operator-based
methods, which approximate nonlinear dynamics by linear models, is analyzed. In
addition, a novel method is developed for the data-driven determination of port-Hamiltonian
models, which plausibly represent energy flows and can be directly utilized for
passivity-based control design. Moreover, approaches for automatically updating
the plant model used in the control loop are presented in case of model uncertainties
or occuring changes in system dynamics during operation. Experimental and simulative
studies demonstrate the outstanding prediction accuracy of the data-driven models
and the high control performance. The findings of this dissertation make a significant
contribution because the data-driven models exhibit a form that is highly usable
for control engineering. They are physically interpretable and can be seamlessly
integrated into existing analysis and design methods. This opens new perspectives
for future applications and further developments.
author:
- first_name: Annika
full_name: Junker, Annika
id: '41470'
last_name: Junker
orcid: 0009-0002-6475-2503
citation:
ama: Junker A. Datengetriebene Modellbildung für nichtlineare mechatronische
Systeme in regelungstechnisch verwertbarer Form. Vol Band 428. Heinz Nixdorf
Institut; 2024. doi:10.17619/UNIPB/1-2158
apa: 'Junker, A. (2024). Datengetriebene Modellbildung für nichtlineare mechatronische
Systeme in regelungstechnisch verwertbarer Form: Vol. Band 428. Heinz Nixdorf
Institut. https://doi.org/10.17619/UNIPB/1-2158'
bibtex: '@book{Junker_2024, place={Paderborn}, series={Verlagsschriftenreihe des
Heinz Nixdorf Instituts}, title={Datengetriebene Modellbildung für nichtlineare
mechatronische Systeme in regelungstechnisch verwertbarer Form}, volume={Band
428}, DOI={10.17619/UNIPB/1-2158},
publisher={Heinz Nixdorf Institut}, author={Junker, Annika}, year={2024}, collection={Verlagsschriftenreihe
des Heinz Nixdorf Instituts} }'
chicago: 'Junker, Annika. Datengetriebene Modellbildung für nichtlineare mechatronische
Systeme in regelungstechnisch verwertbarer Form. Vol. Band 428. Verlagsschriftenreihe
des Heinz Nixdorf Instituts. Paderborn: Heinz Nixdorf Institut, 2024. https://doi.org/10.17619/UNIPB/1-2158.'
ieee: 'A. Junker, Datengetriebene Modellbildung für nichtlineare mechatronische
Systeme in regelungstechnisch verwertbarer Form, vol. Band 428. Paderborn:
Heinz Nixdorf Institut, 2024.'
mla: Junker, Annika. Datengetriebene Modellbildung für nichtlineare mechatronische
Systeme in regelungstechnisch verwertbarer Form. Heinz Nixdorf Institut, 2024,
doi:10.17619/UNIPB/1-2158.
short: A. Junker, Datengetriebene Modellbildung für nichtlineare mechatronische
Systeme in regelungstechnisch verwertbarer Form, Heinz Nixdorf Institut, Paderborn,
2024.
date_created: 2025-01-13T11:19:30Z
date_updated: 2025-01-16T13:15:20Z
department:
- _id: '153'
- _id: '880'
doi: 10.17619/UNIPB/1-2158
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://digital.ub.uni-paderborn.de/hs/download/pdf/7770359
oa: '1'
place: Paderborn
project:
- _id: '690'
name: 'DART: Datengetriebene Methoden in der Regelungstechnik'
publication_identifier:
isbn:
- '9783947647477'
publication_status: published
publisher: Heinz Nixdorf Institut
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts
status: public
supervisor:
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Boris
full_name: Lohmann, Boris
last_name: Lohmann
title: Datengetriebene Modellbildung für nichtlineare mechatronische Systeme in regelungstechnisch
verwertbarer Form
type: dissertation
user_id: '41470'
volume: Band 428
year: '2024'
...
---
_id: '57300'
abstract:
- lang: eng
text: Engineering methodologies for Cyber-Physical Systems (CPS) call for planning
simulations and physical testing in early phases of product creation. Even in
Model-Based Systems Engineering, there is a lack of systematic support that results
in avoidable costs and iterations in the engineering process. Planning test cases
and test scenarios along the product engineering process is not sufficiently integrated
in terms of support especially for verification and validation engineers. Based
on a systematic literature review, concepts for model-based planning of testing
are developed. Characteristics of test cases and test scenarios of CPS are systematically
identified. Generic templates for the creation of test cases and scenarios are
derived. Based on the templates, a System Modeling Language (SysML) profile extension
is developed which enables intuitive modelling of test cases and scenarios. The
SysML profile is evaluated in a sample System-of-Systems in Disaster Response.
It subsumes various types of sensor systems like rescue robotics, data science
algorithms and visualization technologies like Augmented Reality to support decisions
in extreme weather events. The templates and SysML profile significantly add value
for engineers in the early and systematic planning of verification and validation.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Marcel
full_name: Ebel, Marcel
id: '81788'
last_name: Ebel
orcid: https://orcid.org/0009-0007-5400-4436
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: 'Gräßler I, Ebel M, Pottebaum J. Model-based planning of test cases and test
scenarios to support engineering of Cyber-Physical Systems. In: 2024 IEEE International
Symposium on Systems Engineering (ISSE). IEEE; 2024. doi:10.1109/isse63315.2024.10741135'
apa: Gräßler, I., Ebel, M., & Pottebaum, J. (2024). Model-based planning of
test cases and test scenarios to support engineering of Cyber-Physical Systems.
2024 IEEE International Symposium on Systems Engineering (ISSE). IEEE
International Symposium on Systems Engineering 2024, Perugia. https://doi.org/10.1109/isse63315.2024.10741135
bibtex: '@inproceedings{Gräßler_Ebel_Pottebaum_2024, title={Model-based planning
of test cases and test scenarios to support engineering of Cyber-Physical Systems},
DOI={10.1109/isse63315.2024.10741135},
booktitle={2024 IEEE International Symposium on Systems Engineering (ISSE)}, publisher={IEEE},
author={Gräßler, Iris and Ebel, Marcel and Pottebaum, Jens}, year={2024} }'
chicago: Gräßler, Iris, Marcel Ebel, and Jens Pottebaum. “Model-Based Planning of
Test Cases and Test Scenarios to Support Engineering of Cyber-Physical Systems.”
In 2024 IEEE International Symposium on Systems Engineering (ISSE). IEEE,
2024. https://doi.org/10.1109/isse63315.2024.10741135.
ieee: 'I. Gräßler, M. Ebel, and J. Pottebaum, “Model-based planning of test cases
and test scenarios to support engineering of Cyber-Physical Systems,” presented
at the IEEE International Symposium on Systems Engineering 2024, Perugia, 2024,
doi: 10.1109/isse63315.2024.10741135.'
mla: Gräßler, Iris, et al. “Model-Based Planning of Test Cases and Test Scenarios
to Support Engineering of Cyber-Physical Systems.” 2024 IEEE International
Symposium on Systems Engineering (ISSE), IEEE, 2024, doi:10.1109/isse63315.2024.10741135.
short: 'I. Gräßler, M. Ebel, J. Pottebaum, in: 2024 IEEE International Symposium
on Systems Engineering (ISSE), IEEE, 2024.'
conference:
end_date: 2024-10-18
location: Perugia
name: ' IEEE International Symposium on Systems Engineering 2024'
start_date: 2024-10-16
date_created: 2024-11-20T20:06:22Z
date_updated: 2025-01-17T16:20:14Z
department:
- _id: '152'
doi: 10.1109/isse63315.2024.10741135
has_accepted_license: '1'
keyword:
- Systems Engineering
- Systems verification
- System testing
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=10741135&tag=1
oa: '1'
project:
- _id: '516'
grant_number: '101092749'
name: 'CREXDATA: CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen'
publication: 2024 IEEE International Symposium on Systems Engineering (ISSE)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Model-based planning of test cases and test scenarios to support engineering
of Cyber-Physical Systems
type: conference
user_id: '405'
year: '2024'
...
---
_id: '58348'
abstract:
- lang: eng
text: ' Clinching is a mechanical joining technology, in which a mainly
form-fit joint is created by means of local cold forming. To characterize the
load-bearing behavior of such joints, they are typically analyzed destructively,
for example by tensile-shear tests in combination with metallographic sections.
However, both the initiation and progress of failure can only be described to
a limited extent by this method. Furthermore, these tests allow only limited conclusions
about clinch points under in-service loading. More purposefully, clinch points
can be analyzed nondestructively by combining in-situ computed tomography (CT)
and transient dynamic analysis (TDA). The TDA continuously measures the dynamic
behavior of the specimen and indicates failure events like crack initiation, which
then can be evaluated thoroughly by stopping the test and performing a CT scan.
To qualify the TDA for this task, it is necessary to link the observed damage
behavior with specific dynamic characteristics. In this work, the complementation
of in-situ CT and TDA is investigated by testing a clinched single-lap tensile-shear
specimen made of aluminum. The testing procedure is stepwise: at certain displacement
levels, the specimen is investigated by in-situ CT and TDA. While the in-situ
CT provides the location, extent, and development of the failure phenomena, the
TDA uses this information to evaluate the dynamic signal and detect relevant frequency
ranges, which indicate damage events. The results demonstrate, that failure initiation
and progression can be analyzed efficiently by combining both measuring systems.
The TDA reliably detects relevant signal changes in the monitored frequency band.
By means of in-situ computed tomography, the corresponding failure phenomena can
be described in detail, enhancing the understanding of the load-bearing and deformation
behavior of clinch points. The concatenation of characteristic signal changes
and observed failure phenomena can henceforth be transferred to analyze complex
structures during operation nondestructively by TDA. '
article_type: original
author:
- first_name: Gregor
full_name: Reschke, Gregor
last_name: Reschke
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: 'Reschke G, Köhler D, Kupfer R, Troschitz J, Gude M, Brosius A. In-situ computed
tomography and transient dynamic analysis – failure analysis of a single-lap tensile-shear
test with clinch points. Proceedings of the Institution of Mechanical Engineers,
Part E: Journal of Process Mechanical Engineering. Published online 2024.
doi:10.1177/09544089241251646'
apa: 'Reschke, G., Köhler, D., Kupfer, R., Troschitz, J., Gude, M., & Brosius,
A. (2024). In-situ computed tomography and transient dynamic analysis – failure
analysis of a single-lap tensile-shear test with clinch points. Proceedings
of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering. https://doi.org/10.1177/09544089241251646'
bibtex: '@article{Reschke_Köhler_Kupfer_Troschitz_Gude_Brosius_2024, title={In-situ
computed tomography and transient dynamic analysis – failure analysis of a single-lap
tensile-shear test with clinch points}, DOI={10.1177/09544089241251646},
journal={Proceedings of the Institution of Mechanical Engineers, Part E: Journal
of Process Mechanical Engineering}, publisher={SAGE Publications}, author={Reschke,
Gregor and Köhler, Daniel and Kupfer, Robert and Troschitz, Juliane and Gude,
Maik and Brosius, Alexander}, year={2024} }'
chicago: 'Reschke, Gregor, Daniel Köhler, Robert Kupfer, Juliane Troschitz, Maik
Gude, and Alexander Brosius. “In-Situ Computed Tomography and Transient Dynamic
Analysis – Failure Analysis of a Single-Lap Tensile-Shear Test with Clinch Points.”
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of
Process Mechanical Engineering, 2024. https://doi.org/10.1177/09544089241251646.'
ieee: 'G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, and A. Brosius,
“In-situ computed tomography and transient dynamic analysis – failure analysis
of a single-lap tensile-shear test with clinch points,” Proceedings of the
Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering,
2024, doi: 10.1177/09544089241251646.'
mla: 'Reschke, Gregor, et al. “In-Situ Computed Tomography and Transient Dynamic
Analysis – Failure Analysis of a Single-Lap Tensile-Shear Test with Clinch Points.”
Proceedings of the Institution of Mechanical Engineers, Part E: Journal of
Process Mechanical Engineering, SAGE Publications, 2024, doi:10.1177/09544089241251646.'
short: 'G. Reschke, D. Köhler, R. Kupfer, J. Troschitz, M. Gude, A. Brosius, Proceedings
of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical
Engineering (2024).'
date_created: 2025-01-23T19:21:45Z
date_updated: 2025-01-23T19:32:03Z
department:
- _id: '43'
- _id: '157'
doi: 10.1177/09544089241251646
keyword:
- Clinching
- Non-destructive testing
- Transient Dynamic Analysis
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: 'Proceedings of the Institution of Mechanical Engineers, Part E: Journal
of Process Mechanical Engineering'
publication_identifier:
issn:
- 0954-4089
- 2041-3009
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: In-situ computed tomography and transient dynamic analysis – failure analysis
of a single-lap tensile-shear test with clinch points
type: journal_article
user_id: '98812'
year: '2024'
...
---
_id: '58382'
author:
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Philipp
full_name: Bähr, Philipp
last_name: Bähr
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: David
full_name: Hein, David
id: '7728'
last_name: Hein
- first_name: Silke
full_name: Sommer, Silke
last_name: Sommer
citation:
ama: 'Striewe M, Bähr P, Meschut G, Hein D, Sommer S. Ersatzmodellentwicklung zur
Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau. In: 14. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik. ; 2024.'
apa: 'Striewe, M., Bähr, P., Meschut, G., Hein, D., & Sommer, S. (2024). Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau. 14. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik. 14. Kolloquium: Gemeinsame
Forschung in der Mechanischen Fügetechnik.'
bibtex: '@inproceedings{Striewe_Bähr_Meschut_Hein_Sommer_2024, title={Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau}, booktitle={14. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik}, author={Striewe, Marius
and Bähr, Philipp and Meschut, Gerson and Hein, David and Sommer, Silke}, year={2024}
}'
chicago: 'Striewe, Marius, Philipp Bähr, Gerson Meschut, David Hein, and Silke Sommer.
“Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik
in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven
Karosseriebau.” In 14. Kolloquium: Gemeinsame Forschung in der Mechanischen
Fügetechnik, 2024.'
ieee: 'M. Striewe, P. Bähr, G. Meschut, D. Hein, and S. Sommer, “Ersatzmodellentwicklung
zur Berücksichtigung der lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen
für die Bauteilauslegung im stahlintensiven Karosseriebau,” presented at the 14.
Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik, 2024.'
mla: 'Striewe, Marius, et al. “Ersatzmodellentwicklung zur Berücksichtigung der
lokalen Fügeelementkinematik in mechanisch gefügten Verbindungen für die Bauteilauslegung
im stahlintensiven Karosseriebau.” 14. Kolloquium: Gemeinsame Forschung in
der Mechanischen Fügetechnik, 2024.'
short: 'M. Striewe, P. Bähr, G. Meschut, D. Hein, S. Sommer, in: 14. Kolloquium:
Gemeinsame Forschung in der Mechanischen Fügetechnik, 2024.'
conference:
end_date: 2024-11-28
name: '14. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
start_date: 2024-11-27
date_created: 2025-01-28T08:47:55Z
date_updated: 2025-01-28T08:49:44Z
department:
- _id: '157'
language:
- iso: ger
publication: '14. Kolloquium: Gemeinsame Forschung in der Mechanischen Fügetechnik'
status: public
title: Ersatzmodellentwicklung zur Berücksichtigung der lokalen Fügeelementkinematik
in mechanisch gefügten Verbindungen für die Bauteilauslegung im stahlintensiven
Karosseriebau
type: conference_abstract
user_id: '30228'
year: '2024'
...
---
_id: '58403'
author:
- first_name: Bernd
full_name: Mayer, Bernd
last_name: Mayer
- first_name: Christof
full_name: Nagel, Christof
last_name: Nagel
- first_name: Pedro Henrique Evangelista
full_name: Fernandes, Pedro Henrique Evangelista
last_name: Fernandes
- first_name: Anton
full_name: Matzenmiller, Anton
last_name: Matzenmiller
- first_name: Christian
full_name: Köster, Christian
last_name: Köster
- first_name: Tobias
full_name: Melz, Tobias
last_name: Melz
- first_name: Jörg
full_name: Baumgartner, Jörg
last_name: Baumgartner
- first_name: Matthias
full_name: Hecht, Matthias
last_name: Hecht
- first_name: Karina
full_name: Tews, Karina
id: '40263'
last_name: Tews
- first_name: Serkan
full_name: Çavdar, Serkan
id: '36456'
last_name: Çavdar
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Mayer B, Nagel C, Fernandes PHE, et al. Lebensdauerprognose für Stahlklebverbindungen
bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung
und variablen Amplituden. Vol 1427. Forschungsvereinigung Stahlanwendung e.V.;
2024.
apa: Mayer, B., Nagel, C., Fernandes, P. H. E., Matzenmiller, A., Köster, C., Melz,
T., Baumgartner, J., Hecht, M., Tews, K., Çavdar, S., & Meschut, G. (2024).
Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit
Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden
(Vol. 1427). Forschungsvereinigung Stahlanwendung e.V.
bibtex: '@book{Mayer_Nagel_Fernandes_Matzenmiller_Köster_Melz_Baumgartner_Hecht_Tews_Çavdar_et
al._2024, place={Düsseldorf}, title={Lebensdauerprognose für Stahlklebverbindungen
bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung
und variablen Amplituden}, volume={1427}, publisher={Forschungsvereinigung Stahlanwendung
e.V.}, author={Mayer, Bernd and Nagel, Christof and Fernandes, Pedro Henrique
Evangelista and Matzenmiller, Anton and Köster, Christian and Melz, Tobias and
Baumgartner, Jörg and Hecht, Matthias and Tews, Karina and Çavdar, Serkan and
et al.}, year={2024} }'
chicago: 'Mayer, Bernd, Christof Nagel, Pedro Henrique Evangelista Fernandes, Anton
Matzenmiller, Christian Köster, Tobias Melz, Jörg Baumgartner, et al. Lebensdauerprognose
für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher
Mittelspannung und variablen Amplituden. Vol. 1427. Düsseldorf: Forschungsvereinigung
Stahlanwendung e.V., 2024.'
ieee: 'B. Mayer et al., Lebensdauerprognose für Stahlklebverbindungen
bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher Mittelspannung
und variablen Amplituden, vol. 1427. Düsseldorf: Forschungsvereinigung Stahlanwendung
e.V., 2024.'
mla: Mayer, Bernd, et al. Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer
Belastung mit Phasenverschiebung, veränderlicher Mittelspannung und variablen
Amplituden. Forschungsvereinigung Stahlanwendung e.V., 2024.
short: B. Mayer, C. Nagel, P.H.E. Fernandes, A. Matzenmiller, C. Köster, T. Melz,
J. Baumgartner, M. Hecht, K. Tews, S. Çavdar, G. Meschut, Lebensdauerprognose
für Stahlklebverbindungen bei multiaxialer Belastung mit Phasenverschiebung, veränderlicher
Mittelspannung und variablen Amplituden, Forschungsvereinigung Stahlanwendung
e.V., Düsseldorf, 2024.
date_created: 2025-01-30T08:46:26Z
date_updated: 2025-01-30T08:49:46Z
department:
- _id: '157'
intvolume: ' 1427'
language:
- iso: ger
place: Düsseldorf
publication_identifier:
unknown:
- 978-3-96780-176-7
publisher: Forschungsvereinigung Stahlanwendung e.V.
status: public
title: Lebensdauerprognose für Stahlklebverbindungen bei multiaxialer Belastung mit
Phasenverschiebung, veränderlicher Mittelspannung und variablen Amplituden
type: book
user_id: '40263'
volume: 1427
year: '2024'
...
---
_id: '52216'
author:
- first_name: Karina
full_name: Tews, Karina
id: '40263'
last_name: Tews
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Tews K, Teutenberg D, Meschut G. Mechanisches Verhalten: Charakterisierung
von Klebstoffen. In: DECHEMA Workshop für Klebstoffanwender: Simulation von
Klebverbindungen. ; 2024.'
apa: 'Tews, K., Teutenberg, D., & Meschut, G. (2024). Mechanisches Verhalten:
Charakterisierung von Klebstoffen. DECHEMA Workshop für Klebstoffanwender:
Simulation von Klebverbindungen. DECHEMA Workshop für Klebstoffanwender: Simulation
von Klebverbindungen, Köln.'
bibtex: '@inproceedings{Tews_Teutenberg_Meschut_2024, title={Mechanisches Verhalten:
Charakterisierung von Klebstoffen}, booktitle={DECHEMA Workshop für Klebstoffanwender:
Simulation von Klebverbindungen}, author={Tews, Karina and Teutenberg, Dominik
and Meschut, Gerson}, year={2024} }'
chicago: 'Tews, Karina, Dominik Teutenberg, and Gerson Meschut. “Mechanisches Verhalten:
Charakterisierung von Klebstoffen.” In DECHEMA Workshop für Klebstoffanwender:
Simulation von Klebverbindungen, 2024.'
ieee: 'K. Tews, D. Teutenberg, and G. Meschut, “Mechanisches Verhalten: Charakterisierung
von Klebstoffen,” presented at the DECHEMA Workshop für Klebstoffanwender: Simulation
von Klebverbindungen, Köln, 2024.'
mla: 'Tews, Karina, et al. “Mechanisches Verhalten: Charakterisierung von Klebstoffen.”
DECHEMA Workshop für Klebstoffanwender: Simulation von Klebverbindungen,
2024.'
short: 'K. Tews, D. Teutenberg, G. Meschut, in: DECHEMA Workshop für Klebstoffanwender:
Simulation von Klebverbindungen, 2024.'
conference:
location: Köln
name: 'DECHEMA Workshop für Klebstoffanwender: Simulation von Klebverbindungen'
start_date: 22024-02-26
date_created: 2024-02-29T12:33:31Z
date_updated: 2025-01-30T08:49:33Z
department:
- _id: '157'
language:
- iso: ger
publication: 'DECHEMA Workshop für Klebstoffanwender: Simulation von Klebverbindungen'
status: public
title: 'Mechanisches Verhalten: Charakterisierung von Klebstoffen'
type: conference
user_id: '40263'
year: '2024'
...
---
_id: '55762'
abstract:
- lang: eng
text: The corrosion behavior of a hybrid laminate consisting of laser-structured
aluminum EN AW-6082 ∪ carbon fiber-reinforced polymer was investigated. Specimens
were corroded in aqueous NaCl electrolyte (0.1 mol/L) over a period of up to 31
days and characterized continuously by means of scanning electron and light microscopy,
supplemented by energy dispersive X-ray spectroscopy. Comparative linear sweep
voltammetry was employed on the first and seventh day of the corrosion experiment.
The influence of different laser morphologies and production process parameters
on corrosion behavior was compared. The corrosion reaction mainly arises from
the aluminum component and shows distinct differences in long-term corrosion morphology
between pure EN AW-6082 and the hybrid laminate. Compared to short-term investigations,
a strong influence of galvanic corrosion on the interface is assumed. No distinct
influences of different laser structuring and process parameters on the corrosion
behavior were detected. Weight measurements suggest a continuous loss of mass
attributed to the detachment of corrosion products.
article_number: '1907'
article_type: original
author:
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Ronja
full_name: Scholz, Ronja
last_name: Scholz
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: Delp A, Wu S, Freund J, et al. Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials. 2024;17(8). doi:10.3390/ma17081907
apa: Delp, A., Wu, S., Freund, J., Scholz, R., Löbbecke, M., Tröster, T., Haubrich,
J., & Walther, F. (2024). Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP. Materials, 17(8), Article
1907. https://doi.org/10.3390/ma17081907
bibtex: '@article{Delp_Wu_Freund_Scholz_Löbbecke_Tröster_Haubrich_Walther_2024,
title={Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN
AW-6082 ∪ CFRP}, volume={17}, DOI={10.3390/ma17081907},
number={81907}, journal={Materials}, publisher={MDPI AG}, author={Delp, Alexander
and Wu, Shuang and Freund, Jonathan and Scholz, Ronja and Löbbecke, Miriam and
Tröster, Thomas and Haubrich, Jan and Walther, Frank}, year={2024} }'
chicago: Delp, Alexander, Shuang Wu, Jonathan Freund, Ronja Scholz, Miriam Löbbecke,
Thomas Tröster, Jan Haubrich, and Frank Walther. “Characterization of Interfacial
Corrosion Behavior of Hybrid Laminate EN AW-6082 ∪ CFRP.” Materials 17,
no. 8 (2024). https://doi.org/10.3390/ma17081907.
ieee: 'A. Delp et al., “Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP,” Materials, vol. 17, no. 8, Art.
no. 1907, 2024, doi: 10.3390/ma17081907.'
mla: Delp, Alexander, et al. “Characterization of Interfacial Corrosion Behavior
of Hybrid Laminate EN AW-6082 ∪ CFRP.” Materials, vol. 17, no. 8, 1907,
MDPI AG, 2024, doi:10.3390/ma17081907.
short: A. Delp, S. Wu, J. Freund, R. Scholz, M. Löbbecke, T. Tröster, J. Haubrich,
F. Walther, Materials 17 (2024).
date_created: 2024-08-26T10:48:30Z
date_updated: 2025-01-30T12:31:13Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.3390/ma17081907
intvolume: ' 17'
issue: '8'
language:
- iso: eng
publication: Materials
publication_identifier:
issn:
- 1996-1944
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Characterization of Interfacial Corrosion Behavior of Hybrid Laminate EN AW-6082
∪ CFRP
type: journal_article
user_id: '48039'
volume: 17
year: '2024'
...
---
_id: '58441'
abstract:
- lang: eng
text: This study presents a numerical approach using a 3D finite element model to
quantify the remaining clamp load of a plastic nut joint after a specific time.
The viscoelastic relaxation of a thermoplastic nut, which is predominantly screwed
on a welding stud, is described by a material card using Prony Series. Prony Series
are derived from experimental Dynamical Mechanical Analysis with different moisture
and fiber contents of the thermoplastic. Since plastic nuts usually do not have
preformed threads, the increased temperatures and resulting stresses from the
thread-forming process are considered in the simulation. Firstly, the FE model
is verified by substrate stress relaxation tests. Subsequently, experimental clamp
load measurements with miniature compression load cells verify the clamp load
prediction. Finally, the developed model is used to analyze the clamp load distribution
within the threads
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Wippermann J, Meschut G. Numerical modeling of clamp load relaxation of plastic
nuts under varying moisture and fiber content. Published online 2024.
apa: Wippermann, J., & Meschut, G. (2024). Numerical modeling of clamp load
relaxation of plastic nuts under varying moisture and fiber content. Springer
Science and Business Media LLC.
bibtex: '@article{Wippermann_Meschut_2024, title={Numerical modeling of clamp load
relaxation of plastic nuts under varying moisture and fiber content}, publisher={Springer
Science and Business Media LLC}, author={Wippermann, Jan and Meschut, Gerson},
year={2024} }'
chicago: Wippermann, Jan, and Gerson Meschut. “Numerical Modeling of Clamp Load
Relaxation of Plastic Nuts under Varying Moisture and Fiber Content.” Springer
Science and Business Media LLC, 2024.
ieee: J. Wippermann and G. Meschut, “Numerical modeling of clamp load relaxation
of plastic nuts under varying moisture and fiber content.” Springer Science and
Business Media LLC, 2024.
mla: Wippermann, Jan, and Gerson Meschut. Numerical Modeling of Clamp Load Relaxation
of Plastic Nuts under Varying Moisture and Fiber Content. Springer Science
and Business Media LLC, 2024.
short: J. Wippermann, G. Meschut, (2024).
date_created: 2025-01-30T14:30:09Z
date_updated: 2025-01-30T14:41:17Z
department:
- _id: '157'
language:
- iso: eng
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Numerical modeling of clamp load relaxation of plastic nuts under varying moisture
and fiber content
type: preprint
user_id: '55686'
year: '2024'
...
---
_id: '58440'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Wippermann J, Meschut G. Effect of Water Absorption on the Clamp Load of Plastic
Nuts. In: Proceedings of the Munich Symposium on Lightweight Design 2023.
Springer Nature Switzerland; 2024. doi:10.1007/978-3-031-64669-0_5'
apa: Wippermann, J., & Meschut, G. (2024). Effect of Water Absorption on the
Clamp Load of Plastic Nuts. In Proceedings of the Munich Symposium on Lightweight
Design 2023. Springer Nature Switzerland. https://doi.org/10.1007/978-3-031-64669-0_5
bibtex: '@inbook{Wippermann_Meschut_2024, place={Cham}, title={Effect of Water Absorption
on the Clamp Load of Plastic Nuts}, DOI={10.1007/978-3-031-64669-0_5},
booktitle={Proceedings of the Munich Symposium on Lightweight Design 2023}, publisher={Springer
Nature Switzerland}, author={Wippermann, Jan and Meschut, Gerson}, year={2024}
}'
chicago: 'Wippermann, Jan, and Gerson Meschut. “Effect of Water Absorption on the
Clamp Load of Plastic Nuts.” In Proceedings of the Munich Symposium on Lightweight
Design 2023. Cham: Springer Nature Switzerland, 2024. https://doi.org/10.1007/978-3-031-64669-0_5.'
ieee: 'J. Wippermann and G. Meschut, “Effect of Water Absorption on the Clamp Load
of Plastic Nuts,” in Proceedings of the Munich Symposium on Lightweight Design
2023, Cham: Springer Nature Switzerland, 2024.'
mla: Wippermann, Jan, and Gerson Meschut. “Effect of Water Absorption on the Clamp
Load of Plastic Nuts.” Proceedings of the Munich Symposium on Lightweight Design
2023, Springer Nature Switzerland, 2024, doi:10.1007/978-3-031-64669-0_5.
short: 'J. Wippermann, G. Meschut, in: Proceedings of the Munich Symposium on Lightweight
Design 2023, Springer Nature Switzerland, Cham, 2024.'
date_created: 2025-01-30T14:29:31Z
date_updated: 2025-01-30T14:40:50Z
department:
- _id: '157'
doi: 10.1007/978-3-031-64669-0_5
language:
- iso: eng
place: Cham
publication: Proceedings of the Munich Symposium on Lightweight Design 2023
publication_identifier:
isbn:
- '9783031646683'
- '9783031646690'
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: Effect of Water Absorption on the Clamp Load of Plastic Nuts
type: book_chapter
user_id: '55686'
year: '2024'
...
---
_id: '58442'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Wippermann J, Meschut G. Analyse des Ein- und Überdrehmoments von Kunststoffmuttern
in Abhängigkeit von der Luftfeuchtigkeit. JOINING PLASTICS. 2024;18.
apa: Wippermann, J., & Meschut, G. (2024). Analyse des Ein- und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von der Luftfeuchtigkeit. JOINING PLASTICS,
18.
bibtex: '@article{Wippermann_Meschut_2024, title={Analyse des Ein- und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von der Luftfeuchtigkeit}, volume={18},
journal={JOINING PLASTICS}, author={Wippermann, Jan and Meschut, Gerson}, year={2024}
}'
chicago: Wippermann, Jan, and Gerson Meschut. “Analyse Des Ein- Und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von Der Luftfeuchtigkeit.” JOINING PLASTICS
18 (2024).
ieee: J. Wippermann and G. Meschut, “Analyse des Ein- und Überdrehmoments von Kunststoffmuttern
in Abhängigkeit von der Luftfeuchtigkeit,” JOINING PLASTICS, vol. 18, 2024.
mla: Wippermann, Jan, and Gerson Meschut. “Analyse Des Ein- Und Überdrehmoments
von Kunststoffmuttern in Abhängigkeit von Der Luftfeuchtigkeit.” JOINING PLASTICS,
vol. 18, 2024.
short: J. Wippermann, G. Meschut, JOINING PLASTICS 18 (2024).
date_created: 2025-01-30T14:34:56Z
date_updated: 2025-01-30T14:38:37Z
department:
- _id: '157'
intvolume: ' 18'
language:
- iso: eng
publication: JOINING PLASTICS
quality_controlled: '1'
status: public
title: Analyse des Ein- und Überdrehmoments von Kunststoffmuttern in Abhängigkeit
von der Luftfeuchtigkeit
type: journal_article
user_id: '55686'
volume: 18
year: '2024'
...
---
_id: '58448'
abstract:
- lang: eng
text: Die Inbetriebnahme von Steuerungen und Regelungen stellt sicher, dass ein
mechatronisches System ordnungsgemäß funktioniert und den Anforderungen gerecht
wird. Der modellbasierte Entwurf basiert auf einem genauen Simulationsmodell.
Allerdings ist dieser klassische Weg bei komplexen Systemen oft nicht praktikabel,
da die analytische Modellierung zu kompliziert und zeitaufwendig ist. Diese Forschungslücke
wird durch Verfahren adressiert, die eine effiziente und sichere Inbetriebnahme
ermöglichen. Diese Verfahren kombinieren Regelungstechnik und Reinforcement Learning
und nutzen vorhandenes Wissen über die Regelungsaufgabe, um Korrekturen basierend
auf Messdaten und der probabilistischen Gauß-Prozess-Regression vorzunehmen. Das
Vorwissen kann als teilweise bekanntes physikalisches Modell oder als Steuerungsfunktion
vorliegen. Anwendungsbeispiele sind der Ultraschalldrahtbondprozess, verschiedene
Pendelsysteme und ein Hexapod. Eine angepasste Bayessche Optimierung wird zur
Identifikation einer Steuerparametrisierung für das Ultraschallbonden eingesetzt.
Außerdem wird eine hybride Optimalsteuerung für das Doppelpendel auf einem Wagen
entwickelt und erfolgreich validiert. Fur einen Hexapod zur Fahrzeugachsprüfung
wird eine hybride Zustandslinearisierung formuliert und ein Funktionsnachweis
im Rahmen einer Simulation erbracht. Die Einhaltung technischer Rahmenbedingungen
und stabiles Systemverhalten werden durch probabilistische Pradiktionen gewährleistet.
In allen Anwendungsfällen wird eine Steigerung der Effizienz und Güte erzielt.
- lang: eng
text: The commissioning of control systems ensures that a mechatronic system functions
properly and meets the requirements. Model-based design is based on a precise
simulation model. However, this classic approach is often impractical for complex
systems, as analytical modeling is too complicated and time-consuming. This research
gap is addressed by methods that enable efficient and safe commissioning. These
methods combine control engineering and reinforcement learning and use existing
knowledge about the control task to make corrections based on measurement data
and probabilistic Gaussian process regression. The prior knowledge can be available
as a partially known physical model or as a control function. Application examples
include the ultrasonic wire bonding process, various pendulum systems and a hexapod.
An adapted Bayesian optimization is used to identify a control parameterization
for ultrasonic bonding. In addition, a hybrid optimal control for the double pendulum
on a cart is developed and successfully validated. A hybrid state linearization
is formulated for a hexapod for vehicle axle testing and a proof of concept is
provided in a simulation. Compliance with technical framework conditions and stable
system behavior are ensured by probabilistic predictions. An increase in efficiency
and quality is achieved in all use cases.
author:
- first_name: Michael
full_name: Hesse, Michael
id: '29222'
last_name: Hesse
citation:
ama: Hesse M. Interaktive Inbetriebnahme von Steuerungen und Regelungen für partiell
bekannte dynamische Systeme mittels Gauß-Prozess-Regression. Vol 426. Heinz
Nixdorf Institut; 2024. doi:10.17619/UNIPB/1-2135
apa: Hesse, M. (2024). Interaktive Inbetriebnahme von Steuerungen und Regelungen
für partiell bekannte dynamische Systeme mittels Gauß-Prozess-Regression (Vol.
426). Heinz Nixdorf Institut. https://doi.org/10.17619/UNIPB/1-2135
bibtex: '@book{Hesse_2024, place={Paderborn}, series={Verlagsschriftenreihe des
Heinz Nixdorf Instituts}, title={Interaktive Inbetriebnahme von Steuerungen und
Regelungen für partiell bekannte dynamische Systeme mittels Gauß-Prozess-Regression},
volume={426}, DOI={10.17619/UNIPB/1-2135},
publisher={Heinz Nixdorf Institut}, author={Hesse, Michael}, year={2024}, collection={Verlagsschriftenreihe
des Heinz Nixdorf Instituts} }'
chicago: 'Hesse, Michael. Interaktive Inbetriebnahme von Steuerungen und Regelungen
für partiell bekannte dynamische Systeme mittels Gauß-Prozess-Regression.
Vol. 426. Verlagsschriftenreihe des Heinz Nixdorf Instituts. Paderborn: Heinz
Nixdorf Institut, 2024. https://doi.org/10.17619/UNIPB/1-2135.'
ieee: 'M. Hesse, Interaktive Inbetriebnahme von Steuerungen und Regelungen für
partiell bekannte dynamische Systeme mittels Gauß-Prozess-Regression, vol.
426. Paderborn: Heinz Nixdorf Institut, 2024.'
mla: Hesse, Michael. Interaktive Inbetriebnahme von Steuerungen und Regelungen
für partiell bekannte dynamische Systeme mittels Gauß-Prozess-Regression.
Heinz Nixdorf Institut, 2024, doi:10.17619/UNIPB/1-2135.
short: M. Hesse, Interaktive Inbetriebnahme von Steuerungen und Regelungen für partiell
bekannte dynamische Systeme mittels Gauß-Prozess-Regression, Heinz Nixdorf Institut,
Paderborn, 2024.
date_created: 2025-01-30T14:45:46Z
date_updated: 2025-01-30T14:58:46Z
department:
- _id: '153'
- _id: '880'
doi: 10.17619/UNIPB/1-2135
intvolume: ' 426'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://digital.ub.uni-paderborn.de/doi/10.17619/UNIPB/1-2135
oa: '1'
place: Paderborn
publication_identifier:
eissn:
- 2365-4422
isbn:
- 978-3-947647-45-3
publication_status: published
publisher: Heinz Nixdorf Institut
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts
status: public
supervisor:
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Eyke
full_name: Hüllermeier, Eyke
last_name: Hüllermeier
title: Interaktive Inbetriebnahme von Steuerungen und Regelungen für partiell bekannte
dynamische Systeme mittels Gauß-Prozess-Regression
type: dissertation
user_id: '82875'
volume: 426
year: '2024'
...
---
_id: '58446'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Wippermann J, Meschut G. Entwicklung einer Methode zur Prognose der Verschraubungsparameter
von Kunststoffmuttern. In: 14 Gemeinsames Kolloquium Zur Mechanischen Fügetechnik.
; 2024.'
apa: Wippermann, J., & Meschut, G. (2024). Entwicklung einer Methode zur Prognose
der Verschraubungsparameter von Kunststoffmuttern. 14 Gemeinsames Kolloquium
Zur Mechanischen Fügetechnik.
bibtex: '@inproceedings{Wippermann_Meschut_2024, title={Entwicklung einer Methode
zur Prognose der Verschraubungsparameter von Kunststoffmuttern}, booktitle={14
Gemeinsames Kolloquium Zur Mechanischen Fügetechnik}, author={Wippermann, Jan
and Meschut, Gerson}, year={2024} }'
chicago: Wippermann, Jan, and Gerson Meschut. “Entwicklung Einer Methode Zur Prognose
Der Verschraubungsparameter von Kunststoffmuttern.” In 14 Gemeinsames Kolloquium
Zur Mechanischen Fügetechnik, 2024.
ieee: J. Wippermann and G. Meschut, “Entwicklung einer Methode zur Prognose der
Verschraubungsparameter von Kunststoffmuttern,” 2024.
mla: Wippermann, Jan, and Gerson Meschut. “Entwicklung Einer Methode Zur Prognose
Der Verschraubungsparameter von Kunststoffmuttern.” 14 Gemeinsames Kolloquium
Zur Mechanischen Fügetechnik, 2024.
short: 'J. Wippermann, G. Meschut, in: 14 Gemeinsames Kolloquium Zur Mechanischen
Fügetechnik, 2024.'
date_created: 2025-01-30T14:44:16Z
date_updated: 2025-01-30T14:44:33Z
department:
- _id: '157'
language:
- iso: eng
publication: 14 Gemeinsames Kolloquium Zur Mechanischen Fügetechnik
status: public
title: Entwicklung einer Methode zur Prognose der Verschraubungsparameter von Kunststoffmuttern
type: conference_abstract
user_id: '55686'
year: '2024'
...
---
_id: '58458'
author:
- first_name: Julian
full_name: Gilich, Julian
id: '44391'
last_name: Gilich
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Felix
full_name: Wiebicke, Felix
last_name: Wiebicke
- first_name: Ilja
full_name: Koch, Ilja
last_name: Koch
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Gilich J, Teutenberg D, Meschut G, et al. Influences on the Material Displacement
and Compression Stresses in the Joining Process of Highly Viscous Thermal Interface
Materials. In: 77th IIW Annual Assembly and International Conference on Welding
and Joining. ; 2024.'
apa: Gilich, J., Teutenberg, D., Meschut, G., Gröger, B., Wiebicke, F., Koch, I.,
& Gude, M. (2024). Influences on the Material Displacement and Compression
Stresses in the Joining Process of Highly Viscous Thermal Interface Materials.
77th IIW Annual Assembly and International Conference on Welding and Joining.
77th IIW Annual Assembly and International Conference on Welding and Joining,
Rhodos, Griechenland.
bibtex: '@inproceedings{Gilich_Teutenberg_Meschut_Gröger_Wiebicke_Koch_Gude_2024,
title={Influences on the Material Displacement and Compression Stresses in the
Joining Process of Highly Viscous Thermal Interface Materials}, booktitle={77th
IIW Annual Assembly and International Conference on Welding and Joining}, author={Gilich,
Julian and Teutenberg, Dominik and Meschut, Gerson and Gröger, Benjamin and Wiebicke,
Felix and Koch, Ilja and Gude, Maik}, year={2024} }'
chicago: Gilich, Julian, Dominik Teutenberg, Gerson Meschut, Benjamin Gröger, Felix
Wiebicke, Ilja Koch, and Maik Gude. “Influences on the Material Displacement and
Compression Stresses in the Joining Process of Highly Viscous Thermal Interface
Materials.” In 77th IIW Annual Assembly and International Conference on Welding
and Joining, 2024.
ieee: J. Gilich et al., “Influences on the Material Displacement and Compression
Stresses in the Joining Process of Highly Viscous Thermal Interface Materials,”
presented at the 77th IIW Annual Assembly and International Conference on Welding
and Joining, Rhodos, Griechenland, 2024.
mla: Gilich, Julian, et al. “Influences on the Material Displacement and Compression
Stresses in the Joining Process of Highly Viscous Thermal Interface Materials.”
77th IIW Annual Assembly and International Conference on Welding and Joining,
2024.
short: 'J. Gilich, D. Teutenberg, G. Meschut, B. Gröger, F. Wiebicke, I. Koch, M.
Gude, in: 77th IIW Annual Assembly and International Conference on Welding and
Joining, 2024.'
conference:
end_date: 2024-07-07
location: Rhodos, Griechenland
name: 77th IIW Annual Assembly and International Conference on Welding and Joining
start_date: 2024-07-12
date_created: 2025-01-31T12:34:52Z
date_updated: 2025-01-31T12:35:05Z
department:
- _id: '157'
language:
- iso: eng
publication: 77th IIW Annual Assembly and International Conference on Welding and
Joining
status: public
title: Influences on the Material Displacement and Compression Stresses in the Joining
Process of Highly Viscous Thermal Interface Materials
type: conference_abstract
user_id: '44391'
year: '2024'
...
---
_id: '56487'
author:
- first_name: Thomas
full_name: Ehlert, Thomas
id: '47151'
last_name: Ehlert
- first_name: Tural
full_name: Mamedov, Tural
last_name: Mamedov
- first_name: Markus
full_name: Schubert, Markus
last_name: Schubert
- first_name: Eugeny Y.
full_name: Kenig, Eugeny Y.
id: '665'
last_name: Kenig
citation:
ama: 'Ehlert T, Mamedov T, Schubert M, Kenig EY. Estimation of efficiency loss for
stationary and moving structured packing columns using the hydrodynamic analogy
approach. In: ; 2024.'
apa: Ehlert, T., Mamedov, T., Schubert, M., & Kenig, E. Y. (2024). Estimation
of efficiency loss for stationary and moving structured packing columns using
the hydrodynamic analogy approach. 16th International Conference on Gas–Liquid
and Gas–Liquid–Solid Reactor Engineering, Dresden.
bibtex: '@inproceedings{Ehlert_Mamedov_Schubert_Kenig_2024, title={Estimation of
efficiency loss for stationary and moving structured packing columns using the
hydrodynamic analogy approach}, author={Ehlert, Thomas and Mamedov, Tural and
Schubert, Markus and Kenig, Eugeny Y.}, year={2024} }'
chicago: Ehlert, Thomas, Tural Mamedov, Markus Schubert, and Eugeny Y. Kenig. “Estimation
of Efficiency Loss for Stationary and Moving Structured Packing Columns Using
the Hydrodynamic Analogy Approach,” 2024.
ieee: T. Ehlert, T. Mamedov, M. Schubert, and E. Y. Kenig, “Estimation of efficiency
loss for stationary and moving structured packing columns using the hydrodynamic
analogy approach,” presented at the 16th International Conference on Gas–Liquid
and Gas–Liquid–Solid Reactor Engineering, Dresden, 2024.
mla: Ehlert, Thomas, et al. Estimation of Efficiency Loss for Stationary and
Moving Structured Packing Columns Using the Hydrodynamic Analogy Approach.
2024.
short: 'T. Ehlert, T. Mamedov, M. Schubert, E.Y. Kenig, in: 2024.'
conference:
end_date: 2024-09-05
location: Dresden
name: 16th International Conference on Gas–Liquid and Gas–Liquid–Solid Reactor Engineering
start_date: 2024-09-02
date_created: 2024-10-10T12:04:32Z
date_updated: 2025-02-03T11:02:39Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
status: public
title: Estimation of efficiency loss for stationary and moving structured packing
columns using the hydrodynamic analogy approach
type: conference_abstract
user_id: '47151'
year: '2024'
...
---
_id: '58503'
author:
- first_name: Dennis
full_name: Hambach, Dennis
id: '32850'
last_name: Hambach
citation:
ama: 'Hambach D. Technologieakzeptanz beim Einsatz von Handhelds zur Unterstützung
des Hörverstehens. Eine Datendiskussion. In: ; 2024.'
apa: Hambach, D. (2024). Technologieakzeptanz beim Einsatz von Handhelds zur
Unterstützung des Hörverstehens. Eine Datendiskussion. 16. DGFF Nachwuchstagung
- Brücken bauen - Perspektiven und Potenziale in der Fremdsprachenforschung, Paderborn.
bibtex: '@inproceedings{Hambach_2024, title={Technologieakzeptanz beim Einsatz von
Handhelds zur Unterstützung des Hörverstehens. Eine Datendiskussion}, author={Hambach,
Dennis}, year={2024} }'
chicago: Hambach, Dennis. “Technologieakzeptanz Beim Einsatz von Handhelds Zur Unterstützung
Des Hörverstehens. Eine Datendiskussion,” 2024.
ieee: D. Hambach, “Technologieakzeptanz beim Einsatz von Handhelds zur Unterstützung
des Hörverstehens. Eine Datendiskussion,” presented at the 16. DGFF Nachwuchstagung
- Brücken bauen - Perspektiven und Potenziale in der Fremdsprachenforschung, Paderborn,
2024.
mla: Hambach, Dennis. Technologieakzeptanz Beim Einsatz von Handhelds Zur Unterstützung
Des Hörverstehens. Eine Datendiskussion. 2024.
short: 'D. Hambach, in: 2024.'
conference:
end_date: 2024-09-17
location: Paderborn
name: 16. DGFF Nachwuchstagung - Brücken bauen - Perspektiven und Potenziale in
der Fremdsprachenforschung
start_date: 2024-09-16
date_created: 2025-02-04T10:26:25Z
date_updated: 2025-02-04T10:35:12Z
ddc:
- '430'
department:
- _id: '146'
- _id: '398'
has_accepted_license: '1'
language:
- iso: eng
status: public
title: Technologieakzeptanz beim Einsatz von Handhelds zur Unterstützung des Hörverstehens.
Eine Datendiskussion
type: conference_abstract
user_id: '32850'
year: '2024'
...
---
_id: '49430'
abstract:
- lang: eng
text: Within the current energy and environmental crisis, new material- and energy-saving
processes are needed. For this reason, this study focuses on the development of
a new forming technology for Ti-6Al-4V sheet metal. It is based on combination
of solution treatment by resistive heating with rapid tool-based quenching and
subsequent annealing. This new “TISTRAQ” process is comparable with press-hardening
already known for steels and hot die quenching known for aluminium alloys. One
of the main influencing factors for this process is the heat transfer coefficient
(HTC). It is an important driver for adjustment of basic parameters, as selection
of tool material or the forming speed but also plays an important role while elaborating
temperature distribution in the numerical model. Therefore, a new and unique test
rig was developed to determine the HTC and to perform tool-based heat treatment
at specimen level under laboratory conditions. The test rig was used to investigate
the influence of the titanium-tool-lubricant system on HTC and cooling rate. Further
the effect of heat treatment in the test rig and tool-based quenching on microstructure
and mechanical properties was studied. To improve the prediction of the temperature
distribution of the titanium during cooling, the HTC was integrated into the numerical
process simulation
author:
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Fabian
full_name: Höschen, Fabian
last_name: Höschen
- first_name: Nina
full_name: Pfeffer, Nina
last_name: Pfeffer
- first_name: Mathias
full_name: Merten, Mathias
last_name: Merten
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Pawel
full_name: Rockicki, Pawel
last_name: Rockicki
- first_name: Heinz Werner
full_name: Höppel, Heinz Werner
last_name: Höppel
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Kaiser MA, Höschen F, Pfeffer N, et al. The new TISTRAQ process: Solution
treatment with rapid quenching and annealing for Ti-6Al-4V sheet metal part forming
- investigation on heat transfer coefficient and influence on cooling rates. In:
IOM3. Chapter 14: Forming, Machining & Joining [Version 1; Not Peer Reviewed].
; 2024. doi:doi.org/10.7490/f1000research.1119929.1'
apa: 'Kaiser, M. A., Höschen, F., Pfeffer, N., Merten, M., Meyer, T., Marten, T.,
Rockicki, P., Höppel, H. W., & Tröster, T. (2024). The new TISTRAQ process:
Solution treatment with rapid quenching and annealing for Ti-6Al-4V sheet metal
part forming - investigation on heat transfer coefficient and influence on cooling
rates. IOM3. Chapter 14: Forming, Machining & Joining [Version 1; Not Peer
Reviewed]. 15th World Conference on Titanium, Edinburgh. https://doi.org/doi.org/10.7490/f1000research.1119929.1'
bibtex: '@inproceedings{Kaiser_Höschen_Pfeffer_Merten_Meyer_Marten_Rockicki_Höppel_Tröster_2024,
title={The new TISTRAQ process: Solution treatment with rapid quenching and annealing
for Ti-6Al-4V sheet metal part forming - investigation on heat transfer coefficient
and influence on cooling rates}, DOI={doi.org/10.7490/f1000research.1119929.1},
booktitle={IOM3. Chapter 14: Forming, Machining & Joining [version 1; not
peer reviewed]}, author={Kaiser, Maximilian Alexander and Höschen, Fabian and
Pfeffer, Nina and Merten, Mathias and Meyer, Thomas and Marten, Thorsten and Rockicki,
Pawel and Höppel, Heinz Werner and Tröster, Thomas}, year={2024} }'
chicago: 'Kaiser, Maximilian Alexander, Fabian Höschen, Nina Pfeffer, Mathias Merten,
Thomas Meyer, Thorsten Marten, Pawel Rockicki, Heinz Werner Höppel, and Thomas
Tröster. “The New TISTRAQ Process: Solution Treatment with Rapid Quenching and
Annealing for Ti-6Al-4V Sheet Metal Part Forming - Investigation on Heat Transfer
Coefficient and Influence on Cooling Rates.” In IOM3. Chapter 14: Forming,
Machining & Joining [Version 1; Not Peer Reviewed], 2024. https://doi.org/doi.org/10.7490/f1000research.1119929.1.'
ieee: 'M. A. Kaiser et al., “The new TISTRAQ process: Solution treatment
with rapid quenching and annealing for Ti-6Al-4V sheet metal part forming - investigation
on heat transfer coefficient and influence on cooling rates,” presented at the
15th World Conference on Titanium, Edinburgh, 2024, doi: doi.org/10.7490/f1000research.1119929.1.'
mla: 'Kaiser, Maximilian Alexander, et al. “The New TISTRAQ Process: Solution Treatment
with Rapid Quenching and Annealing for Ti-6Al-4V Sheet Metal Part Forming - Investigation
on Heat Transfer Coefficient and Influence on Cooling Rates.” IOM3. Chapter
14: Forming, Machining & Joining [Version 1; Not Peer Reviewed], 2024,
doi:doi.org/10.7490/f1000research.1119929.1.'
short: 'M.A. Kaiser, F. Höschen, N. Pfeffer, M. Merten, T. Meyer, T. Marten, P.
Rockicki, H.W. Höppel, T. Tröster, in: IOM3. Chapter 14: Forming, Machining &
Joining [Version 1; Not Peer Reviewed], 2024.'
conference:
end_date: 2023-06-16
location: Edinburgh
name: 15th World Conference on Titanium
start_date: 2023-06-12
date_created: 2023-12-04T10:00:21Z
date_updated: 2025-05-19T11:46:47Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: doi.org/10.7490/f1000research.1119929.1
keyword:
- Interfacial heat transfer coefficient
- Ti-6Al-4V
- nonisothermal forming
- thermomechanical processing
- TISTRAQ process
language:
- iso: eng
publication: 'IOM3. Chapter 14: Forming, Machining & Joining [version 1; not peer
reviewed]'
publication_status: published
quality_controlled: '1'
status: public
title: 'The new TISTRAQ process: Solution treatment with rapid quenching and annealing
for Ti-6Al-4V sheet metal part forming - investigation on heat transfer coefficient
and influence on cooling rates'
type: conference
user_id: '72351'
year: '2024'
...
---
_id: '49437'
abstract:
- lang: eng
text: "The phase and TTT diagrams of the Ti-6Al-4V system allow the development
of a new forming process for a more energy- and materialefficient production of
sheet metal parts. This new “TISTRAQ” process is composed of two steps. In terms
of process technology, the first step is comparable to a direct press-hardening
process already well known for steels. In this step, the Ti-6Al-4V sheet material
is resistively heated to a temperature below β-transus Tβ and, after a very short
holding time, simultaneously formed and quenched by use of water cooled tools.
Thereby, the β phase undergoes a martensitic transformation. The second step is
a subsequent short-time annealing, which leads to a hardening of the material.
In this work, a new test rig using resistive heating technique was used in order
to produce\r\ndifferent solution treated and tool quenched (STQ) and subsequently
annealed (STA) states. In this paper, the effects of heating rate, solution treatment
temperature and holding time on microstructure and mechanical properties are addressed.
For the characterisation, tensile testing and scanning electron microscopy were
used. By the systematic variation of applied processing parameters, dominating
effects on microstructure and mechanical properties were evaluated. For example,
the solution treatment temperature was found to have a significant effect on microstructural
features and characteristic strength and strain values. The obtained results reveal
a high potential for future technical applications."
author:
- first_name: Nina
full_name: Pfeffer, Nina
last_name: Pfeffer
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Mathias
full_name: Göken, Mathias
last_name: Göken
- first_name: Heinz Werner
full_name: Höppel, Heinz Werner
last_name: Höppel
citation:
ama: 'Pfeffer N, Kaiser MA, Meyer T, Göken M, Höppel HW. The new TISTRAQ process:
Solution treatment with rapid quenching and annealing for Ti-6Al-4V sheet metal
part forming - the effect of processing parameters on microstructure and mechanical
properties. In: IOM3. Chapter 14: Forming, Machining & Joining [Version
1; Not Peer Reviewed]. doi:https://doi.org/10.7490/f1000research.1119929.1'
apa: 'Pfeffer, N., Kaiser, M. A., Meyer, T., Göken, M., & Höppel, H. W. (n.d.).
The new TISTRAQ process: Solution treatment with rapid quenching and annealing
for Ti-6Al-4V sheet metal part forming - the effect of processing parameters on
microstructure and mechanical properties. IOM3. Chapter 14: Forming, Machining
& Joining [Version 1; Not Peer Reviewed]. 15th World Conference on Titanium,
Edinburgh. https://doi.org/10.7490/f1000research.1119929.1'
bibtex: '@inproceedings{Pfeffer_Kaiser_Meyer_Göken_Höppel, title={The new TISTRAQ
process: Solution treatment with rapid quenching and annealing for Ti-6Al-4V sheet
metal part forming - the effect of processing parameters on microstructure and
mechanical properties}, DOI={https://doi.org/10.7490/f1000research.1119929.1},
booktitle={IOM3. Chapter 14: Forming, Machining & Joining [version 1; not
peer reviewed]}, author={Pfeffer, Nina and Kaiser, Maximilian Alexander and Meyer,
Thomas and Göken, Mathias and Höppel, Heinz Werner} }'
chicago: 'Pfeffer, Nina, Maximilian Alexander Kaiser, Thomas Meyer, Mathias Göken,
and Heinz Werner Höppel. “The New TISTRAQ Process: Solution Treatment with Rapid
Quenching and Annealing for Ti-6Al-4V Sheet Metal Part Forming - the Effect of
Processing Parameters on Microstructure and Mechanical Properties.” In IOM3.
Chapter 14: Forming, Machining & Joining [Version 1; Not Peer Reviewed],
n.d. https://doi.org/10.7490/f1000research.1119929.1.'
ieee: 'N. Pfeffer, M. A. Kaiser, T. Meyer, M. Göken, and H. W. Höppel, “The new
TISTRAQ process: Solution treatment with rapid quenching and annealing for Ti-6Al-4V
sheet metal part forming - the effect of processing parameters on microstructure
and mechanical properties,” presented at the 15th World Conference on Titanium,
Edinburgh, doi: https://doi.org/10.7490/f1000research.1119929.1.'
mla: 'Pfeffer, Nina, et al. “The New TISTRAQ Process: Solution Treatment with Rapid
Quenching and Annealing for Ti-6Al-4V Sheet Metal Part Forming - the Effect of
Processing Parameters on Microstructure and Mechanical Properties.” IOM3. Chapter
14: Forming, Machining & Joining [Version 1; Not Peer Reviewed], doi:https://doi.org/10.7490/f1000research.1119929.1.'
short: 'N. Pfeffer, M.A. Kaiser, T. Meyer, M. Göken, H.W. Höppel, in: IOM3. Chapter
14: Forming, Machining & Joining [Version 1; Not Peer Reviewed], n.d.'
conference:
end_date: 2023-06-16
location: Edinburgh
name: 15th World Conference on Titanium
start_date: 2023-06-12
date_created: 2023-12-04T11:08:49Z
date_updated: 2025-05-19T11:46:28Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: https://doi.org/10.7490/f1000research.1119929.1
keyword:
- Ti-6Al-4V
- thermomechanical processing
- resistive heating
- quench-forming
- process parameter-microstructure-properties relationship
language:
- iso: eng
publication: 'IOM3. Chapter 14: Forming, Machining & Joining [version 1; not peer
reviewed]'
publication_status: submitted
status: public
title: 'The new TISTRAQ process: Solution treatment with rapid quenching and annealing
for Ti-6Al-4V sheet metal part forming - the effect of processing parameters on
microstructure and mechanical properties'
type: conference
user_id: '72351'
year: '2024'
...