--- _id: '15983' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Simon full_name: Werneke, Simon last_name: Werneke - first_name: Bernd full_name: Siewers, Bernd last_name: Siewers - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: Lauter C, Werneke S, Siewers B, Tröster T. Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design. 2012:53-58. doi:10.1365/s35725-012-0079-2 apa: Lauter, C., Werneke, S., Siewers, B., & Tröster, T. (2012). Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. Lightweight Design, 53–58. https://doi.org/10.1365/s35725-012-0079-2 bibtex: '@article{Lauter_Werneke_Siewers_Tröster_2012, title={Endkonturennahe Fertigung von höchstfesten Hybridbauteilen}, DOI={10.1365/s35725-012-0079-2}, journal={Lightweight Design}, author={Lauter, Christian and Werneke, Simon and Siewers, Bernd and Tröster, Thomas}, year={2012}, pages={53–58} }' chicago: Lauter, Christian, Simon Werneke, Bernd Siewers, and Thomas Tröster. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” Lightweight Design, 2012, 53–58. https://doi.org/10.1365/s35725-012-0079-2. ieee: C. Lauter, S. Werneke, B. Siewers, and T. Tröster, “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen,” Lightweight Design, pp. 53–58, 2012. mla: Lauter, Christian, et al. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” Lightweight Design, 2012, pp. 53–58, doi:10.1365/s35725-012-0079-2. short: C. Lauter, S. Werneke, B. Siewers, T. Tröster, Lightweight Design (2012) 53–58. date_created: 2020-02-24T08:34:12Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.1365/s35725-012-0079-2 language: - iso: ger page: 53-58 publication: Lightweight Design publication_identifier: issn: - 1865-4819 - 2192-8738 publication_status: published status: public title: Endkonturennahe Fertigung von höchstfesten Hybridbauteilen type: journal_article user_id: '72008' year: '2012' ... --- _id: '15985' author: - first_name: Corin full_name: Reuter, Corin last_name: Reuter - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Holger full_name: Block, Holger last_name: Block - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Reuter C, Frantz M, Lauter C, Block H, Tröster T. Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. In: ; 2012.' apa: Reuter, C., Frantz, M., Lauter, C., Block, H., & Tröster, T. (2012). Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. Presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy. bibtex: '@inproceedings{Reuter_Frantz_Lauter_Block_Tröster_2012, title={Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP}, author={Reuter, Corin and Frantz, Meike and Lauter, Christian and Block, Holger and Tröster, Thomas}, year={2012} }' chicago: Reuter, Corin, Meike Frantz, Christian Lauter, Holger Block, and Thomas Tröster. “Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP,” 2012. ieee: C. Reuter, M. Frantz, C. Lauter, H. Block, and T. Tröster, “Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP,” presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy, 2012. mla: Reuter, Corin, et al. Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP. 2012. short: 'C. Reuter, M. Frantz, C. Lauter, H. Block, T. Tröster, in: 2012.' conference: end_date: 2012-06-20 location: Turin, Italy name: 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS) start_date: 2012-06-18 date_created: 2020-02-24T08:48:14Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing status: public title: Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP type: conference user_id: '72008' year: '2012' ... --- _id: '15987' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Meike full_name: Frantz, Meike last_name: Frantz - first_name: J. P. full_name: Kohler, J. P. last_name: Kohler - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Lauter C, Frantz M, Kohler JP, Tröster T. Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.' apa: Lauter, C., Frantz, M., Kohler, J. P., & Tröster, T. (2012). Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy. bibtex: '@inproceedings{Lauter_Frantz_Kohler_Tröster_2012, title={Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements}, author={Lauter, Christian and Frantz, Meike and Kohler, J. P. and Tröster, Thomas}, year={2012} }' chicago: Lauter, Christian, Meike Frantz, J. P. Kohler, and Thomas Tröster. “Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012. ieee: C. Lauter, M. Frantz, J. P. Kohler, and T. Tröster, “Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy, 2012. mla: Lauter, Christian, et al. Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements. 2012. short: 'C. Lauter, M. Frantz, J.P. Kohler, T. Tröster, in: 2012.' conference: end_date: 2012-06-28 location: Venice, Italy name: 15th European Conference on Composite Materials (ECCM15) start_date: 2012-06-24 date_created: 2020-02-24T08:58:53Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng project: - _id: '52' name: Computing Resources Provided by the Paderborn Center for Parallel Computing status: public title: Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements type: conference user_id: '72008' year: '2012' ... --- _id: '15988' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: M. full_name: Sarrazin, M. last_name: Sarrazin - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Lauter C, Sarrazin M, Tröster T. Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. In: ; 2012.' apa: Lauter, C., Sarrazin, M., & Tröster, T. (2012). Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. Presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal. bibtex: '@inproceedings{Lauter_Sarrazin_Tröster_2012, title={Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics}, author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2012} }' chicago: Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics,” 2012. ieee: C. Lauter, M. Sarrazin, and T. Tröster, “Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics,” presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal, 2012. mla: Lauter, Christian, et al. Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics. 2012. short: 'C. Lauter, M. Sarrazin, T. Tröster, in: 2012.' conference: end_date: 2012-06-28 location: Porto, Portugal name: 1st International Conference of the International Journal of Structural Integrity (IJSI) start_date: 2012-06-25 date_created: 2020-02-24T09:01:31Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics type: conference user_id: '72008' year: '2012' ... --- _id: '15989' author: - first_name: Leif full_name: Ickert, Leif last_name: Ickert - first_name: Dieter full_name: Thomas, Dieter last_name: Thomas - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: Lutz full_name: Eckstein, Lutz last_name: Eckstein citation: ama: Ickert L, Thomas D, Tröster T, Eckstein L. Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244. 2012;(244). apa: Ickert, L., Thomas, D., Tröster, T., & Eckstein, L. (2012). Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. FAT-Schriftenreihe 244, (244). bibtex: '@article{Ickert_Thomas_Tröster_Eckstein_2012, title={Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise}, number={244}, journal={FAT-Schriftenreihe 244}, publisher={Forschungsvereinigung Automobiltechnik e.V.}, author={Ickert, Leif and Thomas, Dieter and Tröster, Thomas and Eckstein, Lutz}, year={2012} }' chicago: Ickert, Leif, Dieter Thomas, Thomas Tröster, and Lutz Eckstein. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” FAT-Schriftenreihe 244, no. 244 (2012). ieee: L. Ickert, D. Thomas, T. Tröster, and L. Eckstein, “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise,” FAT-Schriftenreihe 244, no. 244, 2012. mla: Ickert, Leif, et al. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” FAT-Schriftenreihe 244, no. 244, Forschungsvereinigung Automobiltechnik e.V., 2012. short: L. Ickert, D. Thomas, T. Tröster, L. Eckstein, FAT-Schriftenreihe 244 (2012). date_created: 2020-02-24T09:10:51Z date_updated: 2022-01-06T06:52:41Z department: - _id: '9' - _id: '321' - _id: '149' issue: '244' language: - iso: ger publication: FAT-Schriftenreihe 244 publication_identifier: issn: - 2192-7863 publisher: Forschungsvereinigung Automobiltechnik e.V. status: public title: Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise type: journal_article user_id: '72008' year: '2012' ... --- _id: '16004' author: - first_name: Christian full_name: Lauter, Christian last_name: Lauter - first_name: Bernd full_name: Siewers, Bernd last_name: Siewers - first_name: B. full_name: Zanft, B. last_name: Zanft - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster citation: ama: 'Lauter C, Siewers B, Zanft B, Tröster T. Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.' apa: Lauter, C., Siewers, B., Zanft, B., & Tröster, T. (2012). Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto . bibtex: '@inproceedings{Lauter_Siewers_Zanft_Tröster_2012, title={Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements}, author={Lauter, Christian and Siewers, Bernd and Zanft, B. and Tröster, Thomas}, year={2012} }' chicago: Lauter, Christian, Bernd Siewers, B. Zanft, and Thomas Tröster. “Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012. ieee: C. Lauter, B. Siewers, B. Zanft, and T. Tröster, “Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto , 2012. mla: Lauter, Christian, et al. Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements. 2012. short: 'C. Lauter, B. Siewers, B. Zanft, T. Tröster, in: 2012.' conference: end_date: 2012-07-27 location: 'Porto ' name: 15th International Conference on Experimental Mechanics (ICEM15) start_date: 2012-07-22 date_created: 2020-02-24T10:43:55Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements type: conference user_id: '72008' year: '2012' ... --- _id: '16007' author: - first_name: M. full_name: Thöne, M. last_name: Thöne - first_name: S. full_name: Leuders, S. last_name: Leuders - first_name: A. full_name: Riemer, A. last_name: Riemer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: H. A. full_name: Richard, H. A. last_name: Richard citation: ama: 'Thöne M, Leuders S, Riemer A, Tröster T, Richard HA. Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. In: ; 2012.' apa: Thöne, M., Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA. bibtex: '@inproceedings{Thöne_Leuders_Riemer_Tröster_Richard_2012, title={Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V}, author={Thöne, M. and Leuders, S. and Riemer, A. and Tröster, Thomas and Richard, H. A.}, year={2012} }' chicago: Thöne, M., S. Leuders, A. Riemer, Thomas Tröster, and H. A. Richard. “Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V,” 2012. ieee: M. Thöne, S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V,” presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA, 2012. mla: Thöne, M., et al. Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V. 2012. short: 'M. Thöne, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.' conference: end_date: 2012-08-08 location: Austin, Texas, USA name: Solid Freeform Fabrication Symposium start_date: 2012-08-06 date_created: 2020-02-24T12:00:43Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V type: conference user_id: '72008' year: '2012' ... --- _id: '16008' author: - first_name: A. full_name: Riemer, A. last_name: Riemer - first_name: S. full_name: Leuders, S. last_name: Leuders - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: H. A. full_name: Richard, H. A. last_name: Richard citation: ama: Riemer A, Leuders S, Tröster T, Richard HA. Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit. 2012. apa: Riemer, A., Leuders, S., Tröster, T., & Richard, H. A. (2012). Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit. bibtex: '@article{Riemer_Leuders_Tröster_Richard_2012, title={Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4}, journal={DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit}, publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Riemer, A. and Leuders, S. and Tröster, Thomas and Richard, H. A.}, year={2012} }' chicago: Riemer, A., S. Leuders, Thomas Tröster, and H. A. Richard. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, 2012. ieee: A. Riemer, S. Leuders, T. Tröster, and H. A. Richard, “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4,” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, 2012. mla: Riemer, A., et al. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit, Deutscher Verband für Materialforschung und -prüfung e.V., 2012. short: A. Riemer, S. Leuders, T. Tröster, H.A. Richard, DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit (2012). date_created: 2020-02-24T12:15:35Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: ger publication: DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit publisher: Deutscher Verband für Materialforschung und -prüfung e.V. status: public title: Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4 type: journal_article user_id: '72008' year: '2012' ... --- _id: '16009' author: - first_name: S. full_name: Leuders, S. last_name: Leuders - first_name: A. full_name: Riemer, A. last_name: Riemer - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: H. A. full_name: Richard, H. A. last_name: Richard citation: ama: 'Leuders S, Riemer A, Tröster T, Richard HA. Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. In: ; 2012.' apa: Leuders, S., Riemer, A., Tröster, T., & Richard, H. A. (2012). Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel. bibtex: '@inproceedings{Leuders_Riemer_Tröster_Richard_2012, title={Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement}, author={Leuders, S. and Riemer, A. and Tröster, Thomas and Richard, H. A.}, year={2012} }' chicago: Leuders, S., A. Riemer, Thomas Tröster, and H. A. Richard. “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” 2012. ieee: S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel, 2012. mla: Leuders, S., et al. Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. 2012. short: 'S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.' conference: end_date: 2012-10-30 location: Kassel name: 1st International Conference on Thermo-Mechanically Graded Materials start_date: 2012-10-29 date_created: 2020-02-24T12:25:44Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' language: - iso: eng status: public title: Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement type: conference user_id: '72008' year: '2012' ... --- _id: '16015' author: - first_name: S. full_name: Leuders, S. last_name: Leuders - first_name: M. full_name: Thöne, M. last_name: Thöne - first_name: A. full_name: Riemer, A. last_name: Riemer - first_name: T. full_name: Niendorf, T. last_name: Niendorf - first_name: Thomas full_name: Tröster, Thomas id: '553' last_name: Tröster - first_name: H.A. full_name: Richard, H.A. last_name: Richard - first_name: H.J. full_name: Maier, H.J. last_name: Maier citation: ama: 'Leuders S, Thöne M, Riemer A, et al. On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue. 2012:300-307. doi:10.1016/j.ijfatigue.2012.11.011' apa: 'Leuders, S., Thöne, M., Riemer, A., Niendorf, T., Tröster, T., Richard, H. A., & Maier, H. J. (2012). On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance. International Journal of Fatigue, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011' bibtex: '@article{Leuders_Thöne_Riemer_Niendorf_Tröster_Richard_Maier_2012, title={On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance}, DOI={10.1016/j.ijfatigue.2012.11.011}, journal={International Journal of Fatigue}, author={Leuders, S. and Thöne, M. and Riemer, A. and Niendorf, T. and Tröster, Thomas and Richard, H.A. and Maier, H.J.}, year={2012}, pages={300–307} }' chicago: 'Leuders, S., M. Thöne, A. Riemer, T. Niendorf, Thomas Tröster, H.A. Richard, and H.J. Maier. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.” International Journal of Fatigue, 2012, 300–307. https://doi.org/10.1016/j.ijfatigue.2012.11.011.' ieee: 'S. Leuders et al., “On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance,” International Journal of Fatigue, pp. 300–307, 2012.' mla: 'Leuders, S., et al. “On the Mechanical Behaviour of Titanium Alloy TiAl6V4 Manufactured by Selective Laser Melting: Fatigue Resistance and Crack Growth Performance.” International Journal of Fatigue, 2012, pp. 300–07, doi:10.1016/j.ijfatigue.2012.11.011.' short: S. Leuders, M. Thöne, A. Riemer, T. Niendorf, T. Tröster, H.A. Richard, H.J. Maier, International Journal of Fatigue (2012) 300–307. date_created: 2020-02-24T12:55:33Z date_updated: 2022-01-06T06:52:42Z department: - _id: '9' - _id: '321' - _id: '149' doi: 10.1016/j.ijfatigue.2012.11.011 language: - iso: eng page: 300-307 publication: International Journal of Fatigue publication_identifier: issn: - 0142-1123 publication_status: published status: public title: 'On the mechanical behaviour of titanium alloy TiAl6V4 manufactured by selective laser melting: Fatigue resistance and crack growth performance' type: journal_article user_id: '72008' year: '2012' ... --- _id: '22164' abstract: - lang: eng text: Generative production techniques have the advantage of manufacturing parts via an additive process without needing a forming tool. One of these additive manufacturing technologies is "Fused Deposition Modeling" (FDM). It is one of the most used additive manufacturing processes to produce prototypes and end-use parts. From a 3D-CAD data set, components and assemblies are manufactured out of thermoplastic material layer by layer by means of an additive process. An extrusion head deposits the molten thermoplastic filament to create each layer with a particular tool path. Due to the thermal fusion the material bonds with the layer beneath and solidifies. Thus a permanent bonding of two layers is formed. In this paper the mechanical data of parts, manufactured with the system Fortus 400mc from Stratasys with the material Ultem*9085 are presented. Tensile and flexural tests according to both, the ASTM and the ISO standard, are conducted. Test specimens are generated with the standard parameters of the native software in different build directions. The tests show different strength and strain characteristics that depend on the given structure as a result of the build direction. Furthermore tensile specimens according to the ASTM standard are generated with changed parameters of the native software to increase the mechanical strength properties. The results are compared to injection molded strength properties. author: - first_name: A. full_name: Bagsik, A. last_name: Bagsik - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: E. full_name: Klemp, E. last_name: Klemp citation: ama: 'Bagsik A, Schöppner V, Klemp E. Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. In: 1st International Conference on Thermo-Mechanically Graded Materials. Vol 1. ; 2012:129-134.' apa: Bagsik, A., Schöppner, V., & Klemp, E. (2012). Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085. 1st International Conference on Thermo-Mechanically Graded Materials, 1, 129–134. bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, title={Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085}, volume={1}, booktitle={1st International Conference on Thermo-Mechanically Graded Materials}, author={Bagsik, A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={129–134} }' chicago: Bagsik, A., Volker Schöppner, and E. Klemp. “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” In 1st International Conference on Thermo-Mechanically Graded Materials, 1:129–34, 2012. ieee: A. Bagsik, V. Schöppner, and E. Klemp, “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085,” in 1st International Conference on Thermo-Mechanically Graded Materials, 2012, vol. 1, pp. 129–134. mla: Bagsik, A., et al. “Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085.” 1st International Conference on Thermo-Mechanically Graded Materials, vol. 1, 2012, pp. 129–34. short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 1st International Conference on Thermo-Mechanically Graded Materials, 2012, pp. 129–134.' date_created: 2021-05-14T07:24:35Z date_updated: 2022-04-25T07:58:51Z department: - _id: '219' - _id: '624' - _id: '367' - _id: '321' - _id: '9' intvolume: ' 1' language: - iso: eng page: 129-134 publication: 1st International Conference on Thermo-Mechanically Graded Materials publication_identifier: isbn: - '9783942267588' quality_controlled: '1' status: public title: Tensile and Flexural Properties of Fused Deposition Modeling Parts Manufactured with ULTEM*9085 type: conference user_id: '70729' volume: 1 year: '2012' ... --- _id: '22024' abstract: - lang: eng text: 'Generative production techniques have the advantage of manufacturing parts via an additive process without needing a forming tool. One of these additive manufacturing technologies is “Fused Deposition Modeling” (FDM). It is one of the most used additive manufacturing processes to produce prototypes and end-use parts. From a 3D-CAD data set, components and assemblies are manufactured out of thermoplastic material layer by layer by means of an additive process. An extrusion head deposits the molten thermoplastic filament to create each layer with a particular tool path. In this paper the mechanical data of parts, manufactured with the system Fortus 400mc from Stratasys with the material Ultem*9085 are presented. Tensile specimens are generated with the standard parameters as well as with changed parameters of the native software to analyze the influence of these parameters on the mechanical strength properties. The tensile tests show different strength and strain characteristics that depend on the given structure and as a result of the build direction. Furthermore the toolpath parameters have an effect on the strength characteristics and the break behavior. In addition, tensile specimens are tested under the influence of different temperatures and after a thermal cycling. ' author: - first_name: A. full_name: Bagsik, A. last_name: Bagsik - first_name: Volker full_name: Schöppner, Volker id: '20530' last_name: Schöppner - first_name: E. full_name: Klemp, E. last_name: Klemp citation: ama: 'Bagsik A, Schöppner V, Klemp E. Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085. In: 5th International Conference on Polymer and Mould Innovations. Vol 5. Centre for Polymer and Material Technology, Univ. College, Ghent Univ.; 2012:266-272. doi:https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616' apa: Bagsik, A., Schöppner, V., & Klemp, E. (2012). Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085. 5th International Conference on Polymer and Mould Innovations, 5, 266–272. https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616 bibtex: '@inproceedings{Bagsik_Schöppner_Klemp_2012, place={Ghent}, title={Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085}, volume={5}, DOI={https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616}, booktitle={5th International Conference on Polymer and Mould Innovations}, publisher={Centre for Polymer and Material Technology, Univ. College, Ghent Univ.}, author={Bagsik, A. and Schöppner, Volker and Klemp, E.}, year={2012}, pages={266–272} }' chicago: 'Bagsik, A., Volker Schöppner, and E. Klemp. “Extensive Analysis of the Mechanical Strength Properties of Fused Deposition Modeling Parts Manufactured with ULTEM 9085.” In 5th International Conference on Polymer and Mould Innovations, 5:266–72. Ghent: Centre for Polymer and Material Technology, Univ. College, Ghent Univ., 2012. https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.' ieee: 'A. Bagsik, V. Schöppner, and E. Klemp, “Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085,” in 5th International Conference on Polymer and Mould Innovations, 2012, vol. 5, pp. 266–272, doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616.' mla: Bagsik, A., et al. “Extensive Analysis of the Mechanical Strength Properties of Fused Deposition Modeling Parts Manufactured with ULTEM 9085.” 5th International Conference on Polymer and Mould Innovations, vol. 5, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., 2012, pp. 266–72, doi:https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616. short: 'A. Bagsik, V. Schöppner, E. Klemp, in: 5th International Conference on Polymer and Mould Innovations, Centre for Polymer and Material Technology, Univ. College, Ghent Univ., Ghent, 2012, pp. 266–272.' date_created: 2021-05-07T13:23:04Z date_updated: 2022-04-25T08:05:52Z department: - _id: '219' - _id: '624' - _id: '367' - _id: '321' - _id: '9' doi: https://www.tib.eu/de/suchen/id/TIBKAT%3A756276616 intvolume: ' 5' language: - iso: eng page: 266-272 place: Ghent publication: 5th International Conference on Polymer and Mould Innovations publisher: Centre for Polymer and Material Technology, Univ. College, Ghent Univ. quality_controlled: '1' status: public title: Extensive Analysis of the mechanical strength properties of Fused Deposition Modeling Parts manufactured with ULTEM 9085 type: conference user_id: '70729' volume: 5 year: '2012' ... --- _id: '23161' author: - first_name: Kathrin full_name: Flaßkamp, Kathrin last_name: Flaßkamp - first_name: Julia full_name: Timmermann, Julia id: '15402' last_name: Timmermann - first_name: Sina full_name: Ober-Blöbaum, Sina id: '16494' last_name: Ober-Blöbaum - first_name: Michael full_name: Dellnitz, Michael last_name: Dellnitz - first_name: Ansgar full_name: Trächtler, Ansgar id: '552' last_name: Trächtler citation: ama: 'Flaßkamp K, Timmermann J, Ober-Blöbaum S, Dellnitz M, Trächtler A. Optimal Control on Stable Manifolds for a Double Pendulum. In: Proceedings in Applied Mathematics and Mechanics. Vol 12(1). ; 2012:723-724.' apa: Flaßkamp, K., Timmermann, J., Ober-Blöbaum, S., Dellnitz, M., & Trächtler, A. (2012). Optimal Control on Stable Manifolds for a Double Pendulum. Proceedings in Applied Mathematics and Mechanics, 12(1), 723–724. bibtex: '@inproceedings{Flaßkamp_Timmermann_Ober-Blöbaum_Dellnitz_Trächtler_2012, title={Optimal Control on Stable Manifolds for a Double Pendulum}, volume={12(1)}, booktitle={Proceedings in Applied Mathematics and Mechanics}, author={Flaßkamp, Kathrin and Timmermann, Julia and Ober-Blöbaum, Sina and Dellnitz, Michael and Trächtler, Ansgar}, year={2012}, pages={723–724} }' chicago: Flaßkamp, Kathrin, Julia Timmermann, Sina Ober-Blöbaum, Michael Dellnitz, and Ansgar Trächtler. “Optimal Control on Stable Manifolds for a Double Pendulum.” In Proceedings in Applied Mathematics and Mechanics, 12(1):723–24, 2012. ieee: K. Flaßkamp, J. Timmermann, S. Ober-Blöbaum, M. Dellnitz, and A. Trächtler, “Optimal Control on Stable Manifolds for a Double Pendulum,” in Proceedings in Applied Mathematics and Mechanics, 2012, vol. 12(1), pp. 723–724. mla: Flaßkamp, Kathrin, et al. “Optimal Control on Stable Manifolds for a Double Pendulum.” Proceedings in Applied Mathematics and Mechanics, vol. 12(1), 2012, pp. 723–24. short: 'K. Flaßkamp, J. Timmermann, S. Ober-Blöbaum, M. Dellnitz, A. Trächtler, in: Proceedings in Applied Mathematics and Mechanics, 2012, pp. 723–724.' date_created: 2021-08-09T07:28:12Z date_updated: 2022-01-24T08:18:41Z department: - _id: '153' language: - iso: eng page: 723-724 publication: Proceedings in Applied Mathematics and Mechanics status: public title: Optimal Control on Stable Manifolds for a Double Pendulum type: conference user_id: '15694' volume: 12(1) year: '2012' ... --- _id: '29533' author: - first_name: Sebastian full_name: Pook, Sebastian last_name: Pook - first_name: J{\"u}rgen full_name: Gausemeier, J{\"u}rgen last_name: Gausemeier - first_name: Rafal full_name: Dorociak, Rafal last_name: Dorociak citation: ama: "Pook S, Gausemeier J, Dorociak R. Securing the reliability of tomorrow’s systems with Self-Optimization. In: The Annual Reliability and Maintainability Symposium \x96 RAMS 2012. ; 2012." apa: "Pook, S., Gausemeier, J., & Dorociak, R. (2012). Securing the reliability of tomorrow’s systems with Self-Optimization. The Annual Reliability and Maintainability Symposium \x96 RAMS 2012. The Annual Reliability and Maintainability Symposium \x96 RAMS 2012." bibtex: "@inproceedings{Pook_Gausemeier_Dorociak_2012, place={Reno, Nevada, USA}, title={Securing the reliability of tomorrow’s systems with Self-Optimization}, booktitle={The Annual Reliability and Maintainability Symposium \x96 RAMS 2012}, author={Pook, Sebastian and Gausemeier, J{\\\"u}rgen and Dorociak, Rafal}, year={2012} }" chicago: "Pook, Sebastian, J{\\\"u}rgen Gausemeier, and Rafal Dorociak. “Securing the Reliability of Tomorrow’s Systems with Self-Optimization.” In The Annual Reliability and Maintainability Symposium \x96 RAMS 2012. Reno, Nevada, USA, 2012." ieee: "S. Pook, J. Gausemeier, and R. Dorociak, “Securing the reliability of tomorrow’s systems with Self-Optimization,” presented at the The Annual Reliability and Maintainability Symposium \x96 RAMS 2012, 2012." mla: "Pook, Sebastian, et al. “Securing the Reliability of Tomorrow’s Systems with Self-Optimization.” The Annual Reliability and Maintainability Symposium \x96 RAMS 2012, 2012." short: "S. Pook, J. Gausemeier, R. Dorociak, in: The Annual Reliability and Maintainability Symposium \x96 RAMS 2012, Reno, Nevada, USA, 2012." conference: end_date: 2012-01-26 name: "The Annual Reliability and Maintainability Symposium \x96 RAMS 2012" start_date: 2012-01-23 date_created: 2022-01-24T17:52:23Z date_updated: 2022-01-25T18:05:14Z department: - _id: '676' language: - iso: eng place: Reno, Nevada, USA publication: "The Annual Reliability and Maintainability Symposium \x96 RAMS 2012" publication_status: published status: public title: Securing the reliability of tomorrow's systems with Self-Optimization type: conference user_id: '71124' year: '2012' ... --- _id: '29534' author: - first_name: Daniel full_name: Nordsiek, Daniel last_name: Nordsiek citation: ama: Nordsiek D. System for the Design of Production Systems Based on the Principle Solution{\"solution} of Mechatronic Systems. Vol 304. publishing series of the Heinz Nixdorf Institute, Paderborn; 2012. apa: Nordsiek, D. (2012). System for the design of production systems based on the principle solution{\"solution} of mechatronic systems. (Vol. 304). publishing series of the Heinz Nixdorf Institute, Paderborn. bibtex: '@book{Nordsiek_2012, series={publishing series of the Heinz Nixdorf Institute, Paderborn}, title={System for the design of production systems based on the principle solution{\"solution} of mechatronic systems.}, volume={304}, publisher={publishing series of the Heinz Nixdorf Institute, Paderborn}, author={Nordsiek, Daniel}, year={2012}, collection={publishing series of the Heinz Nixdorf Institute, Paderborn} }' chicago: Nordsiek, Daniel. System for the Design of Production Systems Based on the Principle Solution{\"solution} of Mechatronic Systems. Vol. 304. Publishing Series of the Heinz Nixdorf Institute, Paderborn. publishing series of the Heinz Nixdorf Institute, Paderborn, 2012. ieee: D. Nordsiek, System for the design of production systems based on the principle solution{\"solution} of mechatronic systems., vol. 304. publishing series of the Heinz Nixdorf Institute, Paderborn, 2012. mla: Nordsiek, Daniel. System for the Design of Production Systems Based on the Principle Solution{\"solution} of Mechatronic Systems. publishing series of the Heinz Nixdorf Institute, Paderborn, 2012. short: D. Nordsiek, System for the Design of Production Systems Based on the Principle Solution{\"solution} of Mechatronic Systems., publishing series of the Heinz Nixdorf Institute, Paderborn, 2012. date_created: 2022-01-24T17:58:27Z date_updated: 2022-01-25T18:05:06Z department: - _id: '676' intvolume: ' 304' language: - iso: eng publication_status: published publisher: publishing series of the Heinz Nixdorf Institute, Paderborn series_title: publishing series of the Heinz Nixdorf Institute, Paderborn status: public title: System for the design of production systems based on the principle solution{\"solution} of mechatronic systems. type: dissertation user_id: '71124' volume: 304 year: '2012' ... --- _id: '29535' author: - first_name: Sven full_name: Kreft, Sven last_name: Kreft citation: ama: Kreft S. Systematik Zur Effizienten Bildung Geospezifischer Umgebungsmodelle F{\"u}r Fahrsimulationen. Vol 305. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2012. apa: Kreft, S. (2012). Systematik zur effizienten Bildung geospezifischer Umgebungsmodelle f{\"u}r Fahrsimulationen. (Vol. 305). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. bibtex: '@book{Kreft_2012, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, title={Systematik zur effizienten Bildung geospezifischer Umgebungsmodelle f{\"u}r Fahrsimulationen.}, volume={305}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Kreft, Sven}, year={2012}, collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn} }' chicago: Kreft, Sven. Systematik Zur Effizienten Bildung Geospezifischer Umgebungsmodelle F{\"u}r Fahrsimulationen. Vol. 305. Verlagsschriftenreihe Des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2012. ieee: S. Kreft, Systematik zur effizienten Bildung geospezifischer Umgebungsmodelle f{\"u}r Fahrsimulationen., vol. 305. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2012. mla: Kreft, Sven. Systematik Zur Effizienten Bildung Geospezifischer Umgebungsmodelle F{\"u}r Fahrsimulationen. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2012. short: S. Kreft, Systematik Zur Effizienten Bildung Geospezifischer Umgebungsmodelle F{\"u}r Fahrsimulationen., Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2012. date_created: 2022-01-24T18:02:03Z date_updated: 2022-01-25T18:05:05Z department: - _id: '676' intvolume: ' 305' language: - iso: eng publication_status: published publisher: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn status: public title: Systematik zur effizienten Bildung geospezifischer Umgebungsmodelle f{\"u}r Fahrsimulationen. type: dissertation user_id: '71124' volume: 305 year: '2012' ... --- _id: '29532' author: - first_name: J{\"u}rgen full_name: Gausemeier, J{\"u}rgen last_name: Gausemeier - first_name: Vinzent full_name: Rudtsch, Vinzent last_name: Rudtsch - first_name: Christian full_name: ' Tschirner, Christian' last_name: ' Tschirner' citation: ama: 'Gausemeier J, Rudtsch V, Tschirner C. A New Systems Engineering Approach as Enabler for Early Sustainability Analysis. In: Proceedings of the GCSM 2012 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, November. ; 2012.' apa: Gausemeier, J., Rudtsch, V., & Tschirner, C. (2012). A New Systems Engineering Approach as Enabler for Early Sustainability Analysis. Proceedings of the GCSM 2012 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, November. bibtex: '@inproceedings{Gausemeier_Rudtsch_ Tschirner_2012, title={A New Systems Engineering Approach as Enabler for Early Sustainability Analysis}, booktitle={Proceedings of the GCSM 2012 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, November}, author={Gausemeier, J{\"u}rgen and Rudtsch, Vinzent and Tschirner, Christian}, year={2012} }' chicago: Gausemeier, J{\"u}rgen, Vinzent Rudtsch, and Christian Tschirner. “A New Systems Engineering Approach as Enabler for Early Sustainability Analysis.” In Proceedings of the GCSM 2012 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, November, 2012. ieee: J. Gausemeier, V. Rudtsch, and C. Tschirner, “A New Systems Engineering Approach as Enabler for Early Sustainability Analysis,” 2012. mla: Gausemeier, J{\"u}rgen, et al. “A New Systems Engineering Approach as Enabler for Early Sustainability Analysis.” Proceedings of the GCSM 2012 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, November, 2012. short: 'J. Gausemeier, V. Rudtsch, C. Tschirner, in: Proceedings of the GCSM 2012 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, November, 2012.' date_created: 2022-01-24T17:46:55Z date_updated: 2022-01-25T18:05:14Z department: - _id: '676' language: - iso: eng publication: Proceedings of the GCSM 2012 10th Global Conference on Sustainable Manufacturing, Istanbul, Turkey, November publication_status: published status: public title: A New Systems Engineering Approach as Enabler for Early Sustainability Analysis type: conference user_id: '71124' year: '2012' ... --- _id: '29536' author: - first_name: Jan full_name: Rieke, Jan last_name: Rieke - first_name: ' Rafal' full_name: Dorociak, Rafal last_name: Dorociak - first_name: Oliver full_name: Sudmann, Oliver last_name: Sudmann - first_name: 'J{\"u}rgen ' full_name: 'Gausemeier, J{\"u}rgen ' last_name: Gausemeier - first_name: ' Wilhelm' full_name: Sch{\"a}fer, Wilhelm last_name: Sch{\"a}fer citation: ama: 'Rieke J, Dorociak Rafal, Sudmann O, Gausemeier J, Sch{\"a}fer Wilhelm. Management of Cross-Domain Model Consistency for Behavior models of Mechatronic Systems. In: Proceedings of the International Design Conference – DESIGN. ; 2012.' apa: Rieke, J., Dorociak, Rafal, Sudmann, O., Gausemeier, J., & Sch{\"a}fer, Wilhelm. (2012). Management of Cross-Domain Model Consistency for Behavior models of Mechatronic Systems. Proceedings of the International Design Conference – DESIGN. bibtex: '@inproceedings{Rieke_Dorociak_Sudmann_Gausemeier_Sch{\"a}fer_2012, title={Management of Cross-Domain Model Consistency for Behavior models of Mechatronic Systems}, booktitle={Proceedings of the International Design Conference – DESIGN}, author={Rieke, Jan and Dorociak, Rafal and Sudmann, Oliver and Gausemeier, J{\"u}rgen and Sch{\"a}fer, Wilhelm}, year={2012} }' chicago: Rieke, Jan, Rafal Dorociak, Oliver Sudmann, J{\"u}rgen Gausemeier, and Wilhelm Sch{\"a}fer. “Management of Cross-Domain Model Consistency for Behavior Models of Mechatronic Systems.” In Proceedings of the International Design Conference – DESIGN, 2012. ieee: J. Rieke, Rafal Dorociak, O. Sudmann, J. Gausemeier, and Wilhelm Sch{\"a}fer, “Management of Cross-Domain Model Consistency for Behavior models of Mechatronic Systems,” 2012. mla: Rieke, Jan, et al. “Management of Cross-Domain Model Consistency for Behavior Models of Mechatronic Systems.” Proceedings of the International Design Conference – DESIGN, 2012. short: 'J. Rieke, Rafal Dorociak, O. Sudmann, J. Gausemeier, Wilhelm Sch{\"a}fer, in: Proceedings of the International Design Conference – DESIGN, 2012.' date_created: 2022-01-24T18:06:54Z date_updated: 2022-01-25T18:05:05Z department: - _id: '676' language: - iso: eng publication: Proceedings of the International Design Conference – DESIGN publication_status: published status: public title: Management of Cross-Domain Model Consistency for Behavior models of Mechatronic Systems type: conference user_id: '71124' year: '2012' ... --- _id: '29504' abstract: - lang: eng text: "Product piracy destroys jobs, deprives industry of the return on research and development investments and threatens the competitiveness of many companies. Protection against product imitations requires the development of innovative, technical protective measures and holistic protection concepts. This work shows how such protection concepts are developed and implemented. Central to this are the identification of the individual threat potential and the implementation of comprehensive product protection based on protective measures. Practical examples illustrate the application of the methods and tools and facilitate the practical transfer. A uniform presentation of over 90 protective measures completes the book.\r\n" author: - first_name: J{\"u}rgen full_name: Gausemeier, J{\"u}rgen last_name: Gausemeier - first_name: 'Udo ' full_name: 'Lindemann, Udo ' last_name: Lindemann - first_name: Rainer full_name: Glatz, Rainer last_name: Glatz citation: ama: Gausemeier J, Lindemann U, Glatz R. Preventive Product Protection - Guidelines and Application Examples. Carl Hanser Verlag, Munich,; 2012. apa: Gausemeier, J., Lindemann, U., & Glatz, R. (2012). Preventive product protection - guidelines and application examples. Carl Hanser Verlag, Munich,. bibtex: '@book{Gausemeier_Lindemann_Glatz_2012, title={Preventive product protection - guidelines and application examples}, publisher={Carl Hanser Verlag, Munich,}, author={Gausemeier, J{\"u}rgen and Lindemann, Udo and Glatz, Rainer}, year={2012} }' chicago: Gausemeier, J{\"u}rgen, Udo Lindemann, and Rainer Glatz. Preventive Product Protection - Guidelines and Application Examples. Carl Hanser Verlag, Munich, 2012. ieee: J. Gausemeier, U. Lindemann, and R. Glatz, Preventive product protection - guidelines and application examples. Carl Hanser Verlag, Munich, 2012. mla: Gausemeier, J{\"u}rgen, et al. Preventive Product Protection - Guidelines and Application Examples. Carl Hanser Verlag, Munich, 2012. short: J. Gausemeier, U. Lindemann, R. Glatz, Preventive Product Protection - Guidelines and Application Examples, Carl Hanser Verlag, Munich, 2012. date_created: 2022-01-23T16:03:32Z date_updated: 2022-01-25T18:05:35Z department: - _id: '676' language: - iso: eng publication_status: published publisher: Carl Hanser Verlag, Munich, status: public title: Preventive product protection - guidelines and application examples type: book user_id: '71124' year: '2012' ... --- _id: '29530' author: - first_name: Roman full_name: Dumitrescu, Roman id: '16190' last_name: Dumitrescu - first_name: 'Harald ' full_name: 'Anacker, Harald ' last_name: Anacker - first_name: J{\"u}rgen full_name: Gausemeier, J{\"u}rgen last_name: Gausemeier citation: ama: 'Dumitrescu R, Anacker H, Gausemeier J. Design Framework for the Integration of Cognitive Functions into Intelligent Technical Systems. In: Proceedings of 1st Joint International Symposium on System-Integrated Intelligence: New Challenges for Product and Production Engineering. ; 2012.' apa: 'Dumitrescu, R., Anacker, H., & Gausemeier, J. (2012). Design Framework for the Integration of Cognitive Functions into Intelligent Technical Systems. Proceedings of 1st Joint International Symposium on System-Integrated Intelligence: New Challenges for Product and Production Engineering.' bibtex: '@inproceedings{Dumitrescu_Anacker_Gausemeier_2012, title={Design Framework for the Integration of Cognitive Functions into Intelligent Technical Systems}, booktitle={Proceedings of 1st Joint International Symposium on System-integrated Intelligence: New Challenges for Product and Production Engineering}, author={Dumitrescu, Roman and Anacker, Harald and Gausemeier, J{\"u}rgen}, year={2012} }' chicago: 'Dumitrescu, Roman, Harald Anacker, and J{\"u}rgen Gausemeier. “Design Framework for the Integration of Cognitive Functions into Intelligent Technical Systems.” In Proceedings of 1st Joint International Symposium on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2012.' ieee: R. Dumitrescu, H. Anacker, and J. Gausemeier, “Design Framework for the Integration of Cognitive Functions into Intelligent Technical Systems,” 2012. mla: 'Dumitrescu, Roman, et al. “Design Framework for the Integration of Cognitive Functions into Intelligent Technical Systems.” Proceedings of 1st Joint International Symposium on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2012.' short: 'R. Dumitrescu, H. Anacker, J. Gausemeier, in: Proceedings of 1st Joint International Symposium on System-Integrated Intelligence: New Challenges for Product and Production Engineering, 2012.' date_created: 2022-01-24T17:37:02Z date_updated: 2022-01-25T18:05:24Z department: - _id: '676' language: - iso: eng publication: 'Proceedings of 1st Joint International Symposium on System-integrated Intelligence: New Challenges for Product and Production Engineering' publication_status: published status: public title: Design Framework for the Integration of Cognitive Functions into Intelligent Technical Systems type: conference user_id: '71124' year: '2012' ...