---
_id: '23209'
author:
- first_name: Peter
full_name: Reinold, Peter
last_name: Reinold
- first_name: Egor
full_name: Sawazki, Egor
last_name: Sawazki
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Reinold P, Sawazki E, Trächtler A. Integrated Vehicle Dynamics Control of an
Electric Vehicle with Single-wheel Chassis Actuators. 10 Internationales Stuttgarter
Symposium. 2010.
apa: Reinold, P., Sawazki, E., & Trächtler, A. (2010). Integrated Vehicle Dynamics
Control of an Electric Vehicle with Single-wheel Chassis Actuators. 10. Internationales
Stuttgarter Symposium.
bibtex: '@article{Reinold_Sawazki_Trächtler_2010, title={Integrated Vehicle Dynamics
Control of an Electric Vehicle with Single-wheel Chassis Actuators}, journal={10.
Internationales Stuttgarter Symposium}, author={Reinold, Peter and Sawazki, Egor
and Trächtler, Ansgar}, year={2010} }'
chicago: Reinold, Peter, Egor Sawazki, and Ansgar Trächtler. “Integrated Vehicle
Dynamics Control of an Electric Vehicle with Single-Wheel Chassis Actuators.”
10. Internationales Stuttgarter Symposium, 2010.
ieee: P. Reinold, E. Sawazki, and A. Trächtler, “Integrated Vehicle Dynamics Control
of an Electric Vehicle with Single-wheel Chassis Actuators,” 10. Internationales
Stuttgarter Symposium, 2010.
mla: Reinold, Peter, et al. “Integrated Vehicle Dynamics Control of an Electric
Vehicle with Single-Wheel Chassis Actuators.” 10. Internationales Stuttgarter
Symposium, 2010.
short: P. Reinold, E. Sawazki, A. Trächtler, 10. Internationales Stuttgarter Symposium
(2010).
date_created: 2021-08-09T08:53:40Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
language:
- iso: eng
publication: 10. Internationales Stuttgarter Symposium
status: public
title: Integrated Vehicle Dynamics Control of an Electric Vehicle with Single-wheel
Chassis Actuators
type: journal_article
user_id: '24876'
year: '2010'
...
---
_id: '23210'
author:
- first_name: Viktor
full_name: Just, Viktor
last_name: Just
- first_name: Hueseyin
full_name: Cinkaya, Hueseyin
last_name: Cinkaya
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Just V, Cinkaya H, Trächtler A. Entwurf einer adaptiven Regelung für den Vereinzelungsvorgang
in Bankautomaten . In: 7. Paderborner Workshop: “Entwurf Mechatronischer Systeme.”
Vol 272. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Heinz Nixdorf
Institut, Universität Paderborn; 2010:329-339.'
apa: 'Just, V., Cinkaya, H., & Trächtler, A. (2010). Entwurf einer adaptiven
Regelung für den Vereinzelungsvorgang in Bankautomaten . In 7. Paderborner
Workshop: “Entwurf mechatronischer Systeme” (Vol. 272, pp. 329–339). Heinz
Nixdorf Institut, Universität Paderborn.'
bibtex: '@inproceedings{Just_Cinkaya_Trächtler_2010, series={Verlagsschriftenreihe
des Heinz Nixdorf Instituts, Paderborn}, title={Entwurf einer adaptiven Regelung
für den Vereinzelungsvorgang in Bankautomaten }, volume={272}, booktitle={7. Paderborner
Workshop: “Entwurf mechatronischer Systeme”}, publisher={Heinz Nixdorf Institut,
Universität Paderborn}, author={Just, Viktor and Cinkaya, Hueseyin and Trächtler,
Ansgar}, year={2010}, pages={329–339}, collection={Verlagsschriftenreihe des Heinz
Nixdorf Instituts, Paderborn} }'
chicago: 'Just, Viktor, Hueseyin Cinkaya, and Ansgar Trächtler. “Entwurf Einer Adaptiven
Regelung Für Den Vereinzelungsvorgang in Bankautomaten .” In 7. Paderborner
Workshop: “Entwurf Mechatronischer Systeme,” 272:329–39. Verlagsschriftenreihe
Des Heinz Nixdorf Instituts, Paderborn. Heinz Nixdorf Institut, Universität Paderborn,
2010.'
ieee: 'V. Just, H. Cinkaya, and A. Trächtler, “Entwurf einer adaptiven Regelung
für den Vereinzelungsvorgang in Bankautomaten ,” in 7. Paderborner Workshop:
“Entwurf mechatronischer Systeme,” 2010, vol. 272, pp. 329–339.'
mla: 'Just, Viktor, et al. “Entwurf Einer Adaptiven Regelung Für Den Vereinzelungsvorgang
in Bankautomaten .” 7. Paderborner Workshop: “Entwurf Mechatronischer Systeme,”
vol. 272, Heinz Nixdorf Institut, Universität Paderborn, 2010, pp. 329–39.'
short: 'V. Just, H. Cinkaya, A. Trächtler, in: 7. Paderborner Workshop: “Entwurf
Mechatronischer Systeme,” Heinz Nixdorf Institut, Universität Paderborn, 2010,
pp. 329–339.'
date_created: 2021-08-09T08:53:41Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
intvolume: ' 272'
language:
- iso: eng
page: 329-339
publication: '7. Paderborner Workshop: "Entwurf mechatronischer Systeme"'
publisher: Heinz Nixdorf Institut, Universität Paderborn
series_title: Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn
status: public
title: 'Entwurf einer adaptiven Regelung für den Vereinzelungsvorgang in Bankautomaten '
type: conference
user_id: '24876'
volume: 272
year: '2010'
...
---
_id: '23211'
author:
- first_name: Jens
full_name: Geisler, Jens
last_name: Geisler
- first_name: Walter
full_name: Sextro, Walter
last_name: Sextro
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Geisler J, Sextro W, Sondermann-Wölke C, Trächtler A. Experimentelle Untersuchung
der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls. 7 Paderborner
Workshop Entwurf mechatronischer Systeme (EMS 2010). 2010.
apa: Geisler, J., Sextro, W., Sondermann-Wölke, C., & Trächtler, A. (2010).
Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls.
7. Paderborner Workshop Entwurf Mechatronischer Systeme (EMS 2010).
bibtex: '@article{Geisler_Sextro_Sondermann-Wölke_Trächtler_2010, title={Experimentelle
Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls},
journal={7. Paderborner Workshop Entwurf mechatronischer Systeme (EMS 2010)},
author={Geisler, Jens and Sextro, Walter and Sondermann-Wölke, Christoph and Trächtler,
Ansgar}, year={2010} }'
chicago: Geisler, Jens, Walter Sextro, Christoph Sondermann-Wölke, and Ansgar Trächtler.
“Experimentelle Untersuchung Der Selbstoptimierung Innerhalb Des RailCab-Spurführungsmoduls.”
7. Paderborner Workshop Entwurf Mechatronischer Systeme (EMS 2010), 2010.
ieee: J. Geisler, W. Sextro, C. Sondermann-Wölke, and A. Trächtler, “Experimentelle
Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls,”
7. Paderborner Workshop Entwurf mechatronischer Systeme (EMS 2010), 2010.
mla: Geisler, Jens, et al. “Experimentelle Untersuchung Der Selbstoptimierung Innerhalb
Des RailCab-Spurführungsmoduls.” 7. Paderborner Workshop Entwurf Mechatronischer
Systeme (EMS 2010), 2010.
short: J. Geisler, W. Sextro, C. Sondermann-Wölke, A. Trächtler, 7. Paderborner
Workshop Entwurf Mechatronischer Systeme (EMS 2010) (2010).
date_created: 2021-08-09T08:53:42Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
language:
- iso: eng
publication: 7. Paderborner Workshop Entwurf mechatronischer Systeme (EMS 2010)
status: public
title: Experimentelle Untersuchung der Selbstoptimierung innerhalb des RailCab-Spurführungsmoduls
type: journal_article
user_id: '24876'
year: '2010'
...
---
_id: '23212'
author:
- first_name: Remo
full_name: Ferrari, Remo
last_name: Ferrari
- first_name: Oliver
full_name: Sudmann, Oliver
last_name: Sudmann
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Jens
full_name: Geisler, Jens
last_name: Geisler
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
- first_name: Nazim H.
full_name: Madhavji, Nazim H.
last_name: Madhavji
citation:
ama: 'Ferrari R, Sudmann O, Henke C, Geisler J, Schäfer W, Madhavji NH. Requirements
Engineering Decisions in the Context of an Existing Architecture: A Case Study
of a Prototypical Project. In: Proceedings of 18th IEEE International Requirements
Engineering Conference (RE2010), Sydney, Australia. unbekannt. IEEE Computer
Society, Los Alamitos, CA, USA; 2010:79-88.'
apa: 'Ferrari, R., Sudmann, O., Henke, C., Geisler, J., Schäfer, W., & Madhavji,
N. H. (2010). Requirements Engineering Decisions in the Context of an Existing
Architecture: A Case Study of a Prototypical Project. In Proceedings of 18th
IEEE International Requirements Engineering Conference (RE2010), Sydney, Australia
(pp. 79–88). IEEE Computer Society, Los Alamitos, CA, USA.'
bibtex: '@inproceedings{Ferrari_Sudmann_Henke_Geisler_Schäfer_Madhavji_2010, series={unbekannt},
title={Requirements Engineering Decisions in the Context of an Existing Architecture:
A Case Study of a Prototypical Project}, booktitle={Proceedings of 18th IEEE International
Requirements Engineering Conference (RE2010), Sydney, Australia}, publisher={IEEE
Computer Society, Los Alamitos, CA, USA}, author={Ferrari, Remo and Sudmann, Oliver
and Henke, Christian and Geisler, Jens and Schäfer, Wilhelm and Madhavji, Nazim
H.}, year={2010}, pages={79–88}, collection={unbekannt} }'
chicago: 'Ferrari, Remo, Oliver Sudmann, Christian Henke, Jens Geisler, Wilhelm
Schäfer, and Nazim H. Madhavji. “Requirements Engineering Decisions in the Context
of an Existing Architecture: A Case Study of a Prototypical Project.” In Proceedings
of 18th IEEE International Requirements Engineering Conference (RE2010), Sydney,
Australia, 79–88. Unbekannt. IEEE Computer Society, Los Alamitos, CA, USA,
2010.'
ieee: 'R. Ferrari, O. Sudmann, C. Henke, J. Geisler, W. Schäfer, and N. H. Madhavji,
“Requirements Engineering Decisions in the Context of an Existing Architecture:
A Case Study of a Prototypical Project,” in Proceedings of 18th IEEE International
Requirements Engineering Conference (RE2010), Sydney, Australia, 2010, pp.
79–88.'
mla: 'Ferrari, Remo, et al. “Requirements Engineering Decisions in the Context of
an Existing Architecture: A Case Study of a Prototypical Project.” Proceedings
of 18th IEEE International Requirements Engineering Conference (RE2010), Sydney,
Australia, IEEE Computer Society, Los Alamitos, CA, USA, 2010, pp. 79–88.'
short: 'R. Ferrari, O. Sudmann, C. Henke, J. Geisler, W. Schäfer, N.H. Madhavji,
in: Proceedings of 18th IEEE International Requirements Engineering Conference
(RE2010), Sydney, Australia, IEEE Computer Society, Los Alamitos, CA, USA, 2010,
pp. 79–88.'
date_created: 2021-08-09T08:53:43Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
language:
- iso: eng
page: 79-88
publication: Proceedings of 18th IEEE International Requirements Engineering Conference
(RE2010), Sydney, Australia
publisher: IEEE Computer Society, Los Alamitos, CA, USA
series_title: unbekannt
status: public
title: 'Requirements Engineering Decisions in the Context of an Existing Architecture:
A Case Study of a Prototypical Project'
type: conference
user_id: '24876'
year: '2010'
...
---
_id: '23213'
author:
- first_name: Remo
full_name: Ferrari, Remo
last_name: Ferrari
- first_name: Oliver
full_name: Sudmann, Oliver
last_name: Sudmann
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Jens
full_name: Geisler, Jens
last_name: Geisler
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
- first_name: Nazim H.
full_name: Madhavji, Nazim H.
last_name: Madhavji
citation:
ama: 'Ferrari R, Sudmann O, Henke C, Geisler J, Schäfer W, Madhavji NH. Transitioning
from lab studies to large-scale studies: Emerging results from a literal replication.
In: 1st International Workshop on Replication in Empirical Software Engineering
Research (Co-Located with ICSE 2010), Cape Town, South Africa. ; 2010.'
apa: 'Ferrari, R., Sudmann, O., Henke, C., Geisler, J., Schäfer, W., & Madhavji,
N. H. (2010). Transitioning from lab studies to large-scale studies: Emerging
results from a literal replication. In 1st International Workshop on Replication
in Empirical Software Engineering Research (co-located with ICSE 2010), Cape Town,
South Africa.'
bibtex: '@inproceedings{Ferrari_Sudmann_Henke_Geisler_Schäfer_Madhavji_2010, title={Transitioning
from lab studies to large-scale studies: Emerging results from a literal replication},
booktitle={1st International Workshop on Replication in Empirical Software Engineering
Research (co-located with ICSE 2010), Cape Town, South Africa}, author={Ferrari,
Remo and Sudmann, Oliver and Henke, Christian and Geisler, Jens and Schäfer, Wilhelm
and Madhavji, Nazim H.}, year={2010} }'
chicago: 'Ferrari, Remo, Oliver Sudmann, Christian Henke, Jens Geisler, Wilhelm
Schäfer, and Nazim H. Madhavji. “Transitioning from Lab Studies to Large-Scale
Studies: Emerging Results from a Literal Replication.” In 1st International
Workshop on Replication in Empirical Software Engineering Research (Co-Located
with ICSE 2010), Cape Town, South Africa, 2010.'
ieee: 'R. Ferrari, O. Sudmann, C. Henke, J. Geisler, W. Schäfer, and N. H. Madhavji,
“Transitioning from lab studies to large-scale studies: Emerging results from
a literal replication,” in 1st International Workshop on Replication in Empirical
Software Engineering Research (co-located with ICSE 2010), Cape Town, South Africa,
2010.'
mla: 'Ferrari, Remo, et al. “Transitioning from Lab Studies to Large-Scale Studies:
Emerging Results from a Literal Replication.” 1st International Workshop on
Replication in Empirical Software Engineering Research (Co-Located with ICSE 2010),
Cape Town, South Africa, 2010.'
short: 'R. Ferrari, O. Sudmann, C. Henke, J. Geisler, W. Schäfer, N.H. Madhavji,
in: 1st International Workshop on Replication in Empirical Software Engineering
Research (Co-Located with ICSE 2010), Cape Town, South Africa, 2010.'
date_created: 2021-08-09T08:53:44Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
language:
- iso: eng
publication: 1st International Workshop on Replication in Empirical Software Engineering
Research (co-located with ICSE 2010), Cape Town, South Africa
status: public
title: 'Transitioning from lab studies to large-scale studies: Emerging results from
a literal replication'
type: conference
user_id: '24876'
year: '2010'
...
---
_id: '23214'
author:
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
- first_name: Mauro
full_name: Birattari, Mauro
last_name: Birattari
- first_name: Johannes
full_name: Blömer, Johannes
last_name: Blömer
- first_name: Marco
full_name: Dorigo, Marco
last_name: Dorigo
- first_name: Gregor
full_name: Engels, Gregor
last_name: Engels
- first_name: Rehan
full_name: O'Grady, Rehan
last_name: O'Grady
- first_name: Marco
full_name: Platzner, Marco
last_name: Platzner
- first_name: Franz-Josef
full_name: Rammig, Franz-Josef
last_name: Rammig
- first_name: Wolfgang
full_name: Reif, Wolfgang
last_name: Reif
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Schäfer W, Birattari M, Blömer J, et al. Engineering Self-Coordinating Software
Intensive Systems. In: Proceedings of the Foundations of Software Engineering
(FSE) and NITR&D/SPD Working Conference on the Future of Software Engineering
Research (FoSER 2010). Santa Fe, New Mexico, USA; 2010:321-324.'
apa: Schäfer, W., Birattari, M., Blömer, J., Dorigo, M., Engels, G., O’Grady, R.,
… Trächtler, A. (2010). Engineering Self-Coordinating Software Intensive Systems.
In Proceedings of the Foundations of Software Engineering (FSE) and NITR&D/SPD
Working Conference on the Future of Software Engineering Research (FoSER 2010)
(pp. 321–324). Santa Fe, New Mexico, USA.
bibtex: '@inproceedings{Schäfer_Birattari_Blömer_Dorigo_Engels_O’Grady_Platzner_Rammig_Reif_Trächtler_2010,
place={Santa Fe, New Mexico, USA}, title={Engineering Self-Coordinating Software
Intensive Systems}, booktitle={Proceedings of the Foundations of Software Engineering
(FSE) and NITR&D/SPD Working Conference on the Future of Software Engineering
Research (FoSER 2010)}, author={Schäfer, Wilhelm and Birattari, Mauro and Blömer,
Johannes and Dorigo, Marco and Engels, Gregor and O’Grady, Rehan and Platzner,
Marco and Rammig, Franz-Josef and Reif, Wolfgang and Trächtler, Ansgar}, year={2010},
pages={321–324} }'
chicago: Schäfer, Wilhelm, Mauro Birattari, Johannes Blömer, Marco Dorigo, Gregor
Engels, Rehan O’Grady, Marco Platzner, Franz-Josef Rammig, Wolfgang Reif, and
Ansgar Trächtler. “Engineering Self-Coordinating Software Intensive Systems.”
In Proceedings of the Foundations of Software Engineering (FSE) and NITR&D/SPD
Working Conference on the Future of Software Engineering Research (FoSER 2010),
321–24. Santa Fe, New Mexico, USA, 2010.
ieee: W. Schäfer et al., “Engineering Self-Coordinating Software Intensive
Systems,” in Proceedings of the Foundations of Software Engineering (FSE) and
NITR&D/SPD Working Conference on the Future of Software Engineering Research
(FoSER 2010), 2010, pp. 321–324.
mla: Schäfer, Wilhelm, et al. “Engineering Self-Coordinating Software Intensive
Systems.” Proceedings of the Foundations of Software Engineering (FSE) and
NITR&D/SPD Working Conference on the Future of Software Engineering Research
(FoSER 2010), 2010, pp. 321–24.
short: 'W. Schäfer, M. Birattari, J. Blömer, M. Dorigo, G. Engels, R. O’Grady, M.
Platzner, F.-J. Rammig, W. Reif, A. Trächtler, in: Proceedings of the Foundations
of Software Engineering (FSE) and NITR&D/SPD Working Conference on the Future
of Software Engineering Research (FoSER 2010), Santa Fe, New Mexico, USA, 2010,
pp. 321–324.'
date_created: 2021-08-09T08:53:45Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
language:
- iso: eng
page: 321-324
place: Santa Fe, New Mexico, USA
publication: Proceedings of the Foundations of Software Engineering (FSE) and NITR&D/SPD
Working Conference on the Future of Software Engineering Research (FoSER 2010)
status: public
title: Engineering Self-Coordinating Software Intensive Systems
type: conference
user_id: '24876'
year: '2010'
...
---
_id: '23215'
author:
- first_name: Remo
full_name: Ferrari, Remo
last_name: Ferrari
- first_name: Oliver
full_name: Sudmann, Oliver
last_name: Sudmann
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Jens
full_name: Geisler, Jens
last_name: Geisler
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
- first_name: Nazim H.
full_name: Madhavji, Nazim H.
last_name: Madhavji
citation:
ama: 'Ferrari R, Sudmann O, Henke C, Geisler J, Schäfer W, Madhavji NH. Requirements
and Systems Architecture Interaction in a Prototypical Project: Emerging Results.
In: Requirements Engineering: Foundation for Software Quality (REFSQ2010),
Essen, Germany. Vol 6182. Lecture Notes in Computer Science. Springer Berlin
/ Heidelberg; 2010:23-29.'
apa: 'Ferrari, R., Sudmann, O., Henke, C., Geisler, J., Schäfer, W., & Madhavji,
N. H. (2010). Requirements and Systems Architecture Interaction in a Prototypical
Project: Emerging Results. In Requirements Engineering: Foundation for Software
Quality (REFSQ2010), Essen, Germany (Vol. 6182, pp. 23–29). Springer Berlin
/ Heidelberg.'
bibtex: '@inproceedings{Ferrari_Sudmann_Henke_Geisler_Schäfer_Madhavji_2010, series={Lecture
Notes in Computer Science}, title={Requirements and Systems Architecture Interaction
in a Prototypical Project: Emerging Results}, volume={6182}, booktitle={Requirements
Engineering: Foundation for Software Quality (REFSQ2010), Essen, Germany}, publisher={Springer
Berlin / Heidelberg}, author={Ferrari, Remo and Sudmann, Oliver and Henke, Christian
and Geisler, Jens and Schäfer, Wilhelm and Madhavji, Nazim H.}, year={2010}, pages={23–29},
collection={Lecture Notes in Computer Science} }'
chicago: 'Ferrari, Remo, Oliver Sudmann, Christian Henke, Jens Geisler, Wilhelm
Schäfer, and Nazim H. Madhavji. “Requirements and Systems Architecture Interaction
in a Prototypical Project: Emerging Results.” In Requirements Engineering:
Foundation for Software Quality (REFSQ2010), Essen, Germany, 6182:23–29. Lecture
Notes in Computer Science. Springer Berlin / Heidelberg, 2010.'
ieee: 'R. Ferrari, O. Sudmann, C. Henke, J. Geisler, W. Schäfer, and N. H. Madhavji,
“Requirements and Systems Architecture Interaction in a Prototypical Project:
Emerging Results,” in Requirements Engineering: Foundation for Software Quality
(REFSQ2010), Essen, Germany, 2010, vol. 6182, pp. 23–29.'
mla: 'Ferrari, Remo, et al. “Requirements and Systems Architecture Interaction in
a Prototypical Project: Emerging Results.” Requirements Engineering: Foundation
for Software Quality (REFSQ2010), Essen, Germany, vol. 6182, Springer Berlin
/ Heidelberg, 2010, pp. 23–29.'
short: 'R. Ferrari, O. Sudmann, C. Henke, J. Geisler, W. Schäfer, N.H. Madhavji,
in: Requirements Engineering: Foundation for Software Quality (REFSQ2010), Essen,
Germany, Springer Berlin / Heidelberg, 2010, pp. 23–29.'
date_created: 2021-08-09T08:53:47Z
date_updated: 2022-01-06T06:55:47Z
department:
- _id: '153'
intvolume: ' 6182'
language:
- iso: eng
page: 23-29
publication: 'Requirements Engineering: Foundation for Software Quality (REFSQ2010),
Essen, Germany'
publisher: Springer Berlin / Heidelberg
series_title: Lecture Notes in Computer Science
status: public
title: 'Requirements and Systems Architecture Interaction in a Prototypical Project:
Emerging Results'
type: conference
user_id: '24876'
volume: 6182
year: '2010'
...
---
_id: '9743'
abstract:
- lang: eng
text: The hydrothermal method enables the production of high-quality piezoelectric
materials. In this study, we propose to irradiate the reaction solutions with
ultrasonic power during the hydrothermal method to obtain a shorter reaction time
and a smooth film surface. A high-pressure reaction container for the ultrasonic
transducer was newly developed, and the ultrasonically-assisted hydrothermal method
was examined by using this container. The effect of ultrasonic assist on the synthesis
of lead-zirconate-titanate (PZT) thin films and (K,Na)NbO$_{3}$ powders was verified.
Thicker PZT film, thickness around 10 ${\mu}$m, could be obtained in one process,
and (K,Na)NbO$_{3}$ powder was synthesized in half the previous reaction time.
author:
- first_name: Ryo
full_name: Ageba, Ryo
last_name: Ageba
- first_name: Yoichi
full_name: Kadota, Yoichi
last_name: Kadota
- first_name: Takafumi
full_name: Maeda, Takafumi
last_name: Maeda
- first_name: Norihito
full_name: Takiguchi, Norihito
last_name: Takiguchi
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
- first_name: Mutsuo
full_name: Ishikawa, Mutsuo
last_name: Ishikawa
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Ageba R, Kadota Y, Maeda T, et al. Ultrasonically-assisted Hydrothermal Method
for Ferroelectric Material Synthesis. Journal of Korean Physical Society.
2010;57(4):918-923. doi:10.3938/jkps.57.918
apa: Ageba, R., Kadota, Y., Maeda, T., Takiguchi, N., Morita, T., Ishikawa, M.,
… Hemsel, T. (2010). Ultrasonically-assisted Hydrothermal Method for Ferroelectric
Material Synthesis. Journal of Korean Physical Society, 57(4), 918–923.
https://doi.org/10.3938/jkps.57.918
bibtex: '@article{Ageba_Kadota_Maeda_Takiguchi_Morita_Ishikawa_Bornmann_Hemsel_2010,
title={Ultrasonically-assisted Hydrothermal Method for Ferroelectric Material
Synthesis}, volume={57}, DOI={10.3938/jkps.57.918},
number={4}, journal={Journal of Korean Physical Society}, author={Ageba, Ryo and
Kadota, Yoichi and Maeda, Takafumi and Takiguchi, Norihito and Morita, Takeshi
and Ishikawa, Mutsuo and Bornmann, Peter and Hemsel, Tobias}, year={2010}, pages={918–923}
}'
chicago: 'Ageba, Ryo, Yoichi Kadota, Takafumi Maeda, Norihito Takiguchi, Takeshi
Morita, Mutsuo Ishikawa, Peter Bornmann, and Tobias Hemsel. “Ultrasonically-Assisted
Hydrothermal Method for Ferroelectric Material Synthesis.” Journal of Korean
Physical Society 57, no. 4 (2010): 918–23. https://doi.org/10.3938/jkps.57.918.'
ieee: R. Ageba et al., “Ultrasonically-assisted Hydrothermal Method for Ferroelectric
Material Synthesis,” Journal of Korean Physical Society, vol. 57, no. 4,
pp. 918–923, 2010.
mla: Ageba, Ryo, et al. “Ultrasonically-Assisted Hydrothermal Method for Ferroelectric
Material Synthesis.” Journal of Korean Physical Society, vol. 57, no. 4,
2010, pp. 918–23, doi:10.3938/jkps.57.918.
short: R. Ageba, Y. Kadota, T. Maeda, N. Takiguchi, T. Morita, M. Ishikawa, P. Bornmann,
T. Hemsel, Journal of Korean Physical Society 57 (2010) 918–923.
date_created: 2019-05-13T09:35:33Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.918
intvolume: ' 57'
issue: '4'
keyword:
- Hydrothermal method
- High-power ultrasonic
- PZT thin film
- Lead-free piezoelectric materials
language:
- iso: eng
page: 918-923
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Ultrasonically-assisted Hydrothermal Method for Ferroelectric Material Synthesis
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9744'
abstract:
- lang: eng
text: Direct ultrasound irradiation is advantageous to increase the efficiency of
the hydrothermal method which can be used for the production of piezoelectric
thin films and lead free piezoelectric ceramics. To apply ultrasound directly
to the process transducer prototypes were developed regarding the boundary conditions
of the hydrothermal method. LiNbO$_{3}$ and PIC 181 were proven as feasible materials
for high temperature resistant transducers ($\geq 200^\circ C$). Resistance of
the transducers horn against the corrosive mineralizer was achieved by using Hastelloy
C-22. The efficiency of the ultrasound assisted hydrothermal method depends on
the generated sound field. Impedance and sound field measurements have shown that
the sound field depends on the filling level and the position and design of the
transducer.
author:
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Ryo
full_name: Ageba, Ryo
last_name: Ageba
- first_name: Yoishi
full_name: Kadota, Yoishi
last_name: Kadota
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
citation:
ama: Bornmann P, Hemsel T, Littmann W, Ageba R, Kadota Y, Morita T. Ultrasonic Transducer
for the Hydrothermal Method. Journal of Korean Physical Society. 2010;57(4):1122.
doi:10.3938/jkps.57.1122
apa: Bornmann, P., Hemsel, T., Littmann, W., Ageba, R., Kadota, Y., & Morita,
T. (2010). Ultrasonic Transducer for the Hydrothermal Method. Journal of Korean
Physical Society, 57(4), 1122. https://doi.org/10.3938/jkps.57.1122
bibtex: '@article{Bornmann_Hemsel_Littmann_Ageba_Kadota_Morita_2010, title={Ultrasonic
Transducer for the Hydrothermal Method}, volume={57}, DOI={10.3938/jkps.57.1122},
number={4}, journal={Journal of Korean Physical Society}, author={Bornmann, Peter
and Hemsel, Tobias and Littmann, Walter and Ageba, Ryo and Kadota, Yoishi and
Morita, Takeshi}, year={2010}, pages={1122} }'
chicago: 'Bornmann, Peter, Tobias Hemsel, Walter Littmann, Ryo Ageba, Yoishi Kadota,
and Takeshi Morita. “Ultrasonic Transducer for the Hydrothermal Method.” Journal
of Korean Physical Society 57, no. 4 (2010): 1122. https://doi.org/10.3938/jkps.57.1122.'
ieee: P. Bornmann, T. Hemsel, W. Littmann, R. Ageba, Y. Kadota, and T. Morita, “Ultrasonic
Transducer for the Hydrothermal Method,” Journal of Korean Physical Society,
vol. 57, no. 4, p. 1122, 2010.
mla: Bornmann, Peter, et al. “Ultrasonic Transducer for the Hydrothermal Method.”
Journal of Korean Physical Society, vol. 57, no. 4, 2010, p. 1122, doi:10.3938/jkps.57.1122.
short: P. Bornmann, T. Hemsel, W. Littmann, R. Ageba, Y. Kadota, T. Morita, Journal
of Korean Physical Society 57 (2010) 1122.
date_created: 2019-05-13T09:37:56Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.1122
intvolume: ' 57'
issue: '4'
keyword:
- High-temperature transducer
- Hydrothermal method
- Lithium-niobate transducer
language:
- iso: eng
page: '1122'
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Ultrasonic Transducer for the Hydrothermal Method
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9745'
abstract:
- lang: eng
text: In the modeling of piezoelectric Langevin transducers using usual transfer
matrix methods, some simplifications have been adopted. This leads to reduction
of the model quality. A mixed transfer matrix method is employed in the modeling
of Langevin transducers, where the pre-stressed bolt is modeled as a separate
four-pole element, which is connected to other elements in parallel. Based on
the mixed transfer matrix method, the four (six)-pole element description of the
piezoelectric Langevin transducer is built up and the total transfer matrix relation
is derived. The resonance frequencies of the transducer are calculated and then
measured using the impedance analyzer (HP4192). Experimental result shows that
the mixed transfer matrix method has better modeling quality than the usual transfer
matrix method for the vibration analysis of piezoelectric Langevin transducers.
author:
- first_name: Bo
full_name: Fu, Bo
last_name: Fu
- first_name: Chao
full_name: Li, Chao
last_name: Li
- first_name: Jianming
full_name: Zhang, Jianming
last_name: Zhang
- first_name: Zhenwei
full_name: Huang, Zhenwei
last_name: Huang
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Fu B, Li C, Zhang J, Huang Z, Hemsel T. Modeling of Piezoelectric Langevin
Transducers by Using Mixed Transfer Matrix Methods. Journal of Korean Physical
Society. 2010;57(4):929. doi:10.3938/jkps.57.929
apa: Fu, B., Li, C., Zhang, J., Huang, Z., & Hemsel, T. (2010). Modeling of
Piezoelectric Langevin Transducers by Using Mixed Transfer Matrix Methods. Journal
of Korean Physical Society, 57(4), 929. https://doi.org/10.3938/jkps.57.929
bibtex: '@article{Fu_Li_Zhang_Huang_Hemsel_2010, title={Modeling of Piezoelectric
Langevin Transducers by Using Mixed Transfer Matrix Methods}, volume={57}, DOI={10.3938/jkps.57.929}, number={4},
journal={Journal of Korean Physical Society}, author={Fu, Bo and Li, Chao and
Zhang, Jianming and Huang, Zhenwei and Hemsel, Tobias}, year={2010}, pages={929}
}'
chicago: 'Fu, Bo, Chao Li, Jianming Zhang, Zhenwei Huang, and Tobias Hemsel. “Modeling
of Piezoelectric Langevin Transducers by Using Mixed Transfer Matrix Methods.”
Journal of Korean Physical Society 57, no. 4 (2010): 929. https://doi.org/10.3938/jkps.57.929.'
ieee: B. Fu, C. Li, J. Zhang, Z. Huang, and T. Hemsel, “Modeling of Piezoelectric
Langevin Transducers by Using Mixed Transfer Matrix Methods,” Journal of Korean
Physical Society, vol. 57, no. 4, p. 929, 2010.
mla: Fu, Bo, et al. “Modeling of Piezoelectric Langevin Transducers by Using Mixed
Transfer Matrix Methods.” Journal of Korean Physical Society, vol. 57,
no. 4, 2010, p. 929, doi:10.3938/jkps.57.929.
short: B. Fu, C. Li, J. Zhang, Z. Huang, T. Hemsel, Journal of Korean Physical Society
57 (2010) 929.
date_created: 2019-05-13T09:40:42Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.929
intvolume: ' 57'
issue: '4'
keyword:
- Piezoelectric langevin transducer
- Transfer matrix method
- Four (six)-pole element description
- Pre-stressed bolt
language:
- iso: eng
page: '929'
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Modeling of Piezoelectric Langevin Transducers by Using Mixed Transfer Matrix
Methods
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9747'
abstract:
- lang: eng
text: Bei der Konstruktion von Maschinen ist es oftmals erforderlich, Schwingungen
minimal zu halten. Um z.B. die Lebensdauer zu erhöhen, Material einzusparen oder
den Geräuschpegel gering zu halten muss oft ein großer Aufwand zur Dämpfung von
auftretenden Schwingungen betrieben werden. In vielen technischen Anwendungen
werden Einzelteile miteinander verschraubt. Diese Fügestellen können gezielt und
mit wenig Aufwand zur Schwingungsdämpfung herangezogen werden. Die Berechnung
des dynamischen Verhaltens verschraubter Strukturen stellt immer noch eine Herausforderung
dar. Es wurde eine Methode entwickelt, um den eingeschwungenen Zustand elastischer,
miteinander verschraubter Körper mit rauen Fügestellen bei periodischer Anregung
zu berechnen. Als Basis dienen Finite Elemente Modelle der einzelnen Teile, deren
Freiheitsgrade durch modale Kondensation reduziert werden. Unter Anwendung des
Verfahrens von Ritz und Galerkin wird eine Näherungslösung für den eingeschwungenen
Zustand des nichtlinearen, gekoppelten Systems ermittelt. Abhängig von den Schraubenvorspannkräften
sowie den bestimmenden Parametern der Kontaktflächen, Rautiefe und Reibungskoeffizient,
kann die Systemantwort berechnet und optimiert werden. Um die Berechnungsmethode
zu verifizieren wurden Experimente durchgeführt. Der Vergleich zwischen Messung
und Rechnung zeigt eine gute Übereinstimmung. ({\copyright} 2010 Wiley-VCH Verlag
GmbH & Co. KGaA, Weinheim)
author:
- first_name: Johannes Sebastian
full_name: Hölzl, Johannes Sebastian
last_name: Hölzl
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Hölzl JS, Sextro W. Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen.
PAMM. 2010;10(1):247-248. doi:10.1002/pamm.201010116
apa: Hölzl, J. S., & Sextro, W. (2010). Reibungsdämpfung in ausgedehnten, verschraubten
Fügestellen. PAMM, 10(1), 247–248. https://doi.org/10.1002/pamm.201010116
bibtex: '@article{Hölzl_Sextro_2010, title={Reibungsdämpfung in ausgedehnten, verschraubten
Fügestellen}, volume={10}, DOI={10.1002/pamm.201010116},
number={1}, journal={PAMM}, publisher={WILEY-VCH Verlag}, author={Hölzl, Johannes
Sebastian and Sextro, Walter}, year={2010}, pages={247–248} }'
chicago: 'Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten,
Verschraubten Fügestellen.” PAMM 10, no. 1 (2010): 247–48. https://doi.org/10.1002/pamm.201010116.'
ieee: J. S. Hölzl and W. Sextro, “Reibungsdämpfung in ausgedehnten, verschraubten
Fügestellen,” PAMM, vol. 10, no. 1, pp. 247–248, 2010.
mla: Hölzl, Johannes Sebastian, and Walter Sextro. “Reibungsdämpfung in Ausgedehnten,
Verschraubten Fügestellen.” PAMM, vol. 10, no. 1, WILEY-VCH Verlag, 2010,
pp. 247–48, doi:10.1002/pamm.201010116.
short: J.S. Hölzl, W. Sextro, PAMM 10 (2010) 247–248.
date_created: 2019-05-13T09:43:54Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.1002/pamm.201010116
intvolume: ' 10'
issue: '1'
language:
- iso: eng
page: 247-248
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publisher: WILEY-VCH Verlag
status: public
title: Reibungsdämpfung in ausgedehnten, verschraubten Fügestellen
type: journal_article
user_id: '55222'
volume: 10
year: '2010'
...
---
_id: '9748'
abstract:
- lang: eng
text: For many technical applications it is necessary to avoid or to reduce vibrations.
Factors benefiting from vibration reduction are for example the durability of
the application, which is increased, as well as cost expenses and the level of
noise, which are both decreased. Rough, bolted interfaces are common in most machines
and can be used as damping devices with some effort. Perhaps in future such contact
surfaces could be used as damping devices at the interfaces of an automotive engine
or exhaust system. Nevertheless it is difficult to predict the effect of a change
in contact interface parameters on the dynamic behavior of the entire mechanical
system. Therefore a method for calculating the steady state behavior of elastic
multi-body systems was developed. The basis of this method is a finite element
model of each contacting unit. On each model a modal reduction is applied in order
to reduce the degrees of freedom. The method of Ritz and Galerkin is used to calculate
the frequency response functions of the reduced system including contact. This
method allows the calculation of the steady-state behavior of elastic multi-body
systems with rough, bolted contact interfaces, by taking the pre-stress of the
bolts, the roughness and the friction coefficient of the contacting surfaces as
parameters. In order to verify calculated results, a test stand was built. The
comparison of calculated and experimental results showed a satisfying correlation.
author:
- first_name: Johannes Sebastian
full_name: ' Hölzl, Johannes Sebastian'
last_name: ' Hölzl'
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: Hölzl JS, Sextro W. Simulation of the Dynamical Behavior of Elastic Multi-Body
Systems with Bolted, Rough Contact Interfaces. SAE International Journal of
Passenger Cars- Mechanical Systems. 2010:929-935. doi:10.4271/2010-01-1422
apa: Hölzl, J. S., & Sextro, W. (2010). Simulation of the Dynamical Behavior
of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces. SAE International
Journal of Passenger Cars- Mechanical Systems, 929–935. https://doi.org/10.4271/2010-01-1422
bibtex: '@article{ Hölzl_Sextro_2010, title={Simulation of the Dynamical Behavior
of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces}, DOI={10.4271/2010-01-1422}, journal={SAE
International Journal of Passenger Cars- Mechanical Systems}, author={ Hölzl,
Johannes Sebastian and Sextro, Walter}, year={2010}, pages={929–935} }'
chicago: Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical
Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.”
SAE International Journal of Passenger Cars- Mechanical Systems, 2010,
929–35. https://doi.org/10.4271/2010-01-1422.
ieee: J. S. Hölzl and W. Sextro, “Simulation of the Dynamical Behavior of Elastic
Multi-Body Systems with Bolted, Rough Contact Interfaces,” SAE International
Journal of Passenger Cars- Mechanical Systems, pp. 929–935, 2010.
mla: Hölzl, Johannes Sebastian, and Walter Sextro. “Simulation of the Dynamical
Behavior of Elastic Multi-Body Systems with Bolted, Rough Contact Interfaces.”
SAE International Journal of Passenger Cars- Mechanical Systems, 2010,
pp. 929–35, doi:10.4271/2010-01-1422.
short: J.S. Hölzl, W. Sextro, SAE International Journal of Passenger Cars- Mechanical
Systems (2010) 929–935.
date_created: 2019-05-13T09:49:24Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.4271/2010-01-1422
keyword:
- Automotive
language:
- iso: eng
page: 929-935
publication: SAE International Journal of Passenger Cars- Mechanical Systems
quality_controlled: '1'
status: public
title: Simulation of the Dynamical Behavior of Elastic Multi-Body Systems with Bolted,
Rough Contact Interfaces
type: journal_article
user_id: '55222'
year: '2010'
...
---
_id: '9749'
abstract:
- lang: eng
text: Piezoelectric materials find wide application in technical systems. Most often,
a combination of piezoelectric and other materials is advantageous. The position
and the amount of the piezoelectric material within the overall system depends
on various aspects like maximum mechanical output to the load, maximum electromechanical
efficiency of the system, maximum utilization of the piezoelectric material, minimum
self-heating of the piezoelectric material, and controllability of the system,
which might be key aspects for the optimisation of the system design. For a composite
longitudinal vibrator (bolted Langevin transducer), which is a base for many technical
applications, this contribution shows in detail, how above mentioned aspects depend
on the position and volume of the piezoelectric material related to the mode shape.
author:
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Ernst Günther
full_name: Lierk, Ernst Günther
last_name: Lierk
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Takeshi
full_name: Morita, Takeshi
last_name: Morita
citation:
ama: Hemsel T, Lierk EG, Littmann W, Morita T. Various Aspects of the Placement
of a Piezoelectric Material in Composite Actuators, Motors, and Transducers. Journal
of Korean Physical Society. 2010;57(4):933-937. doi:10.3938/jkps.57.933
apa: Hemsel, T., Lierk, E. G., Littmann, W., & Morita, T. (2010). Various Aspects
of the Placement of a Piezoelectric Material in Composite Actuators, Motors, and
Transducers. Journal of Korean Physical Society, 57(4), 933–937.
https://doi.org/10.3938/jkps.57.933
bibtex: '@article{Hemsel_Lierk_Littmann_Morita_2010, title={Various Aspects of the
Placement of a Piezoelectric Material in Composite Actuators, Motors, and Transducers},
volume={57}, DOI={10.3938/jkps.57.933},
number={4}, journal={Journal of Korean Physical Society}, author={Hemsel, Tobias
and Lierk, Ernst Günther and Littmann, Walter and Morita, Takeshi}, year={2010},
pages={933–937} }'
chicago: 'Hemsel, Tobias, Ernst Günther Lierk, Walter Littmann, and Takeshi Morita.
“Various Aspects of the Placement of a Piezoelectric Material in Composite Actuators,
Motors, and Transducers.” Journal of Korean Physical Society 57, no. 4
(2010): 933–37. https://doi.org/10.3938/jkps.57.933.'
ieee: T. Hemsel, E. G. Lierk, W. Littmann, and T. Morita, “Various Aspects of the
Placement of a Piezoelectric Material in Composite Actuators, Motors, and Transducers,”
Journal of Korean Physical Society, vol. 57, no. 4, pp. 933–937, 2010.
mla: Hemsel, Tobias, et al. “Various Aspects of the Placement of a Piezoelectric
Material in Composite Actuators, Motors, and Transducers.” Journal of Korean
Physical Society, vol. 57, no. 4, 2010, pp. 933–37, doi:10.3938/jkps.57.933.
short: T. Hemsel, E.G. Lierk, W. Littmann, T. Morita, Journal of Korean Physical
Society 57 (2010) 933–937.
date_created: 2019-05-13T09:56:22Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.933
intvolume: ' 57'
issue: '4'
keyword:
- Bolted Langevin transducer
- Optimum placement of piezoelectric ceramics
language:
- iso: eng
page: 933-937
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Various Aspects of the Placement of a Piezoelectric Material in Composite Actuators,
Motors, and Transducers
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9750'
author:
- first_name: D.
full_name: Hess, D.
last_name: Hess
- first_name: Thorsten
full_name: Hüfner, Thorsten
last_name: Hüfner
- first_name: Tobias
full_name: Hesse, Tobias
last_name: Hesse
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Thomas
full_name: Sattel, Thomas
last_name: Sattel
citation:
ama: Hess D, Hüfner T, Hesse T, Sondermann-Wölke C, Sattel T. Intelligente mechatronische
Systeme zur automatisierten Fahrzeugführung in Fahrerassistenzsystemen. Internationales
Mechatronik-Kolloquium “Mechatronik 2010.” 2010.
apa: Hess, D., Hüfner, T., Hesse, T., Sondermann-Wölke, C., & Sattel, T. (2010).
Intelligente mechatronische Systeme zur automatisierten Fahrzeugführung in Fahrerassistenzsystemen.
Internationales Mechatronik-Kolloquium “Mechatronik 2010.”
bibtex: '@article{Hess_Hüfner_Hesse_Sondermann-Wölke_Sattel_2010, title={Intelligente
mechatronische Systeme zur automatisierten Fahrzeugführung in Fahrerassistenzsystemen},
journal={Internationales Mechatronik-Kolloquium “Mechatronik 2010”}, author={Hess,
D. and Hüfner, Thorsten and Hesse, Tobias and Sondermann-Wölke, Christoph and
Sattel, Thomas}, year={2010} }'
chicago: Hess, D., Thorsten Hüfner, Tobias Hesse, Christoph Sondermann-Wölke, and
Thomas Sattel. “Intelligente Mechatronische Systeme Zur Automatisierten Fahrzeugführung
in Fahrerassistenzsystemen.” Internationales Mechatronik-Kolloquium “Mechatronik
2010,” 2010.
ieee: D. Hess, T. Hüfner, T. Hesse, C. Sondermann-Wölke, and T. Sattel, “Intelligente
mechatronische Systeme zur automatisierten Fahrzeugführung in Fahrerassistenzsystemen,”
Internationales Mechatronik-Kolloquium “Mechatronik 2010,” 2010.
mla: Hess, D., et al. “Intelligente Mechatronische Systeme Zur Automatisierten Fahrzeugführung
in Fahrerassistenzsystemen.” Internationales Mechatronik-Kolloquium “Mechatronik
2010,” 2010.
short: D. Hess, T. Hüfner, T. Hesse, C. Sondermann-Wölke, T. Sattel, Internationales
Mechatronik-Kolloquium “Mechatronik 2010” (2010).
date_created: 2019-05-13T09:58:41Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
publication: Internationales Mechatronik-Kolloquium "Mechatronik 2010"
status: public
title: Intelligente mechatronische Systeme zur automatisierten Fahrzeugführung in
Fahrerassistenzsystemen
type: journal_article
user_id: '55222'
year: '2010'
...
---
_id: '9751'
abstract:
- lang: eng
text: 'Piezoelectric inertia motors have a simple construction and are controlled
by a single driving signal. This allows for miniaturization and low cost production.
One of the main questions to be answered during the design process of a piezoelectric
inertia motor is which electrical excitation signal yields optimum motor characteristics.
Three signals and their variants are widely used in literature: sawtooth, parabolic
and cycloidic signals. It can be shown that neither of these can drive the motor
at its maximum possible velocity in non-resonant operation. Within this paper
we propose to use a rigid body model of a simple inertia motor to predict the
motor characteristics depending on the movement pattern of the driving element.
Advantages and disadvantages of three different drive signals that maximize the
motor velocity are discussed.'
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Hunstig M, Hemsel T. Drive Signals for Maximizing the Velocity of Piezoelectric
Inertia Motors. Journal of Korean Physical Society. 2010;57(4):938-941.
doi:10.3938/jkps.57.938
apa: Hunstig, M., & Hemsel, T. (2010). Drive Signals for Maximizing the Velocity
of Piezoelectric Inertia Motors. Journal of Korean Physical Society, 57(4),
938–941. https://doi.org/10.3938/jkps.57.938
bibtex: '@article{Hunstig_Hemsel_2010, title={Drive Signals for Maximizing the Velocity
of Piezoelectric Inertia Motors}, volume={57}, DOI={10.3938/jkps.57.938},
number={4}, journal={Journal of Korean Physical Society}, author={Hunstig, Matthias
and Hemsel, Tobias}, year={2010}, pages={938–941} }'
chicago: 'Hunstig, Matthias, and Tobias Hemsel. “Drive Signals for Maximizing the
Velocity of Piezoelectric Inertia Motors.” Journal of Korean Physical Society
57, no. 4 (2010): 938–41. https://doi.org/10.3938/jkps.57.938.'
ieee: M. Hunstig and T. Hemsel, “Drive Signals for Maximizing the Velocity of Piezoelectric
Inertia Motors,” Journal of Korean Physical Society, vol. 57, no. 4, pp.
938–941, 2010.
mla: Hunstig, Matthias, and Tobias Hemsel. “Drive Signals for Maximizing the Velocity
of Piezoelectric Inertia Motors.” Journal of Korean Physical Society, vol.
57, no. 4, 2010, pp. 938–41, doi:10.3938/jkps.57.938.
short: M. Hunstig, T. Hemsel, Journal of Korean Physical Society 57 (2010) 938–941.
date_created: 2019-05-13T10:03:06Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.938
intvolume: ' 57'
issue: '4'
language:
- iso: eng
page: 938-941
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Drive Signals for Maximizing the Velocity of Piezoelectric Inertia Motors
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9752'
abstract:
- lang: eng
text: Piezoelectric inertia motors make use of the inertia of a slider to drive
the slider by friction contact in a series of small steps which are generally
composed of a stick phase and a slip phase. If the best electrical drive signal
for the piezoelectric actuator in an inertia motor is to be determined, its dynamical
behaviour must be known. A classic dynamic lumped parameter model for piezoelectric
actuators is valid only in resonance and, therefore, is not suitable for modelling
the actuator in an inertia motor. A reduced dynamic model is used instead. Its
parameters are identified using a step response measurement. This model is used
to predict the movement of the actuator in response to a velocity-optimized signal
introduced in a separate contribution. Results show that the model cannot represent
the dynamical characteristics of the actuator completely. For determining voltage
signals that let piezoelectric actuators follow a calculated movement pattern
exactly, the model can, therefore, only be used with limitations.
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Hunstig M, Hemsel T. Parameter Identification and Model Validation for the
Piezoelectric Actuator in an Inertia Motor. Journal of Korean Physical Society.
2010;57(4):952-954. doi:10.3938/jkps.57.952
apa: Hunstig, M., & Hemsel, T. (2010). Parameter Identification and Model Validation
for the Piezoelectric Actuator in an Inertia Motor. Journal of Korean Physical
Society, 57(4), 952–954. https://doi.org/10.3938/jkps.57.952
bibtex: '@article{Hunstig_Hemsel_2010, title={Parameter Identification and Model
Validation for the Piezoelectric Actuator in an Inertia Motor}, volume={57}, DOI={10.3938/jkps.57.952}, number={4},
journal={Journal of Korean Physical Society}, author={Hunstig, Matthias and Hemsel,
Tobias}, year={2010}, pages={952–954} }'
chicago: 'Hunstig, Matthias, and Tobias Hemsel. “Parameter Identification and Model
Validation for the Piezoelectric Actuator in an Inertia Motor.” Journal of
Korean Physical Society 57, no. 4 (2010): 952–54. https://doi.org/10.3938/jkps.57.952.'
ieee: M. Hunstig and T. Hemsel, “Parameter Identification and Model Validation for
the Piezoelectric Actuator in an Inertia Motor,” Journal of Korean Physical
Society, vol. 57, no. 4, pp. 952–954, 2010.
mla: Hunstig, Matthias, and Tobias Hemsel. “Parameter Identification and Model Validation
for the Piezoelectric Actuator in an Inertia Motor.” Journal of Korean Physical
Society, vol. 57, no. 4, 2010, pp. 952–54, doi:10.3938/jkps.57.952.
short: M. Hunstig, T. Hemsel, Journal of Korean Physical Society 57 (2010) 952–954.
date_created: 2019-05-13T10:04:13Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
doi: 10.3938/jkps.57.952
intvolume: ' 57'
issue: '4'
language:
- iso: eng
page: 952-954
publication: Journal of Korean Physical Society
publication_identifier:
issn:
- 1948-5719
quality_controlled: '1'
status: public
title: Parameter Identification and Model Validation for the Piezoelectric Actuator
in an Inertia Motor
type: journal_article
user_id: '55222'
volume: 57
year: '2010'
...
---
_id: '9753'
abstract:
- lang: eng
text: 'Piezoelektrische Trägheitsmotoren nutzen die Trägheit einer bewegten Masse,
um diese in kleinen Schritten durch abwechselnde Haft- und Gleitphasen voranzutreiben.
Eine Kernfrage bei der Entwicklung eines piezoelektrischen Trägheitsmotors ist,
welches elektrische Ansteuersignal für das gewünschte Motorverhalten optimal ist.
Das elektrische Signal führt zu einer Bewegung des piezoelektrischen Aktors und
damit der Antriebsstange, die den reibschlüssigen Vortrieb bewirkt. Entsprechend
wird diese Fragestellung in zwei Teilen untersucht: Anhand eines Starrkörpermodells
werden zunächst Bewegungsverläufe für die Antriebsstange ermittelt, mit denen
die maximale Geschwindigkeit erreicht wird. Dabei werden drei Antriebsmodi identifiziert.
Mit allen kann eine höhere Geschwindigkeit als mit der heute häufig verwendeten
Sägezahnanregung erreicht werden. Anschließend wird ein einfaches dynamisches
Modell eines piezoelektrischen Aktors genutzt, um die notwendigen elektrischen
Ansteuersignale für die verschiedenen Antriebsmodi zu bestimmen. Es zeigt sich,
dass das gewählte einfache Modell hierzu nur bedingt geeignet ist.'
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Hunstig M, Hemsel T, Sextro W. Anregungskonzepte und Modellierung piezoelektrischer
Trägheitsmotoren. In: Gausemeier J, Rammig F, Schäfer W, Trächtler A, eds. 7.
Paderborner Workshop Entwurf Mechatronischer Systeme. Vol 272. HNI-Verlagsschriftenreihe.
Paderborn: Heinz Nixdorf Institut, Universität Paderborn; 2010:129-141.'
apa: 'Hunstig, M., Hemsel, T., & Sextro, W. (2010). Anregungskonzepte und Modellierung
piezoelektrischer Trägheitsmotoren. In J. Gausemeier, F. Rammig, W. Schäfer, &
A. Trächtler (Eds.), 7. Paderborner Workshop Entwurf mechatronischer Systeme
(Vol. 272, pp. 129–141). Paderborn: Heinz Nixdorf Institut, Universität Paderborn.'
bibtex: '@inproceedings{Hunstig_Hemsel_Sextro_2010, place={Paderborn}, series={HNI-Verlagsschriftenreihe},
title={Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren},
volume={272}, booktitle={7. Paderborner Workshop Entwurf mechatronischer Systeme},
publisher={Heinz Nixdorf Institut, Universität Paderborn}, author={Hunstig, Matthias
and Hemsel, Tobias and Sextro, Walter}, editor={Gausemeier, Jürgen and Rammig,
Franz and Schäfer, Wilhelm and Trächtler, AnsgarEditors}, year={2010}, pages={129–141},
collection={HNI-Verlagsschriftenreihe} }'
chicago: 'Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Anregungskonzepte
Und Modellierung Piezoelektrischer Trägheitsmotoren.” In 7. Paderborner Workshop
Entwurf Mechatronischer Systeme, edited by Jürgen Gausemeier, Franz Rammig,
Wilhelm Schäfer, and Ansgar Trächtler, 272:129–41. HNI-Verlagsschriftenreihe.
Paderborn: Heinz Nixdorf Institut, Universität Paderborn, 2010.'
ieee: M. Hunstig, T. Hemsel, and W. Sextro, “Anregungskonzepte und Modellierung
piezoelektrischer Trägheitsmotoren,” in 7. Paderborner Workshop Entwurf mechatronischer
Systeme, 2010, vol. 272, pp. 129–141.
mla: Hunstig, Matthias, et al. “Anregungskonzepte Und Modellierung Piezoelektrischer
Trägheitsmotoren.” 7. Paderborner Workshop Entwurf Mechatronischer Systeme,
edited by Jürgen Gausemeier et al., vol. 272, Heinz Nixdorf Institut, Universität
Paderborn, 2010, pp. 129–41.
short: 'M. Hunstig, T. Hemsel, W. Sextro, in: J. Gausemeier, F. Rammig, W. Schäfer,
A. Trächtler (Eds.), 7. Paderborner Workshop Entwurf Mechatronischer Systeme,
Heinz Nixdorf Institut, Universität Paderborn, Paderborn, 2010, pp. 129–141.'
date_created: 2019-05-13T10:05:14Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
editor:
- first_name: Jürgen
full_name: Gausemeier, Jürgen
last_name: Gausemeier
- first_name: Franz
full_name: Rammig, Franz
last_name: Rammig
- first_name: Wilhelm
full_name: Schäfer, Wilhelm
last_name: Schäfer
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
intvolume: ' 272'
keyword:
- Piezoelektrischer Trägheitsmotoren
language:
- iso: eng
page: 129-141
place: Paderborn
publication: 7. Paderborner Workshop Entwurf mechatronischer Systeme
publication_identifier:
issn:
- 0924-4247
publisher: Heinz Nixdorf Institut, Universität Paderborn
series_title: HNI-Verlagsschriftenreihe
status: public
title: Anregungskonzepte und Modellierung piezoelektrischer Trägheitsmotoren
type: conference
user_id: '55222'
volume: 272
year: '2010'
...
---
_id: '9754'
abstract:
- lang: eng
text: A model based design approach for improved piezoelectric inertia motors is
presented. Three velocityoptimized movement patterns for the driving body have
been derived. The influence of the motor parameters and the process of designing
an application specific motor with maximum velocity are shown. A simple dynamic
model of the piezoelectric actuator is used to calculate the voltage signal for
achieving the desired movement pattern. Observed distortions of the optimum pattern,
their influence on the motion of the driven body and different methods to reduce
them are discussed.
author:
- first_name: Matthias
full_name: Hunstig, Matthias
last_name: Hunstig
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Hunstig M, Hemsel T, Sextro W. Improving the Performance of Piezoelectric
Inertia Motors. In: ACTUATOR 2010 Conference Proceedings. ; 2010:657-661.'
apa: Hunstig, M., Hemsel, T., & Sextro, W. (2010). Improving the Performance
of Piezoelectric Inertia Motors. In ACTUATOR 2010 Conference Proceedings
(pp. 657–661).
bibtex: '@inproceedings{Hunstig_Hemsel_Sextro_2010, title={Improving the Performance
of Piezoelectric Inertia Motors}, booktitle={ACTUATOR 2010 Conference Proceedings},
author={Hunstig, Matthias and Hemsel, Tobias and Sextro, Walter}, year={2010},
pages={657–661} }'
chicago: Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Improving the Performance
of Piezoelectric Inertia Motors.” In ACTUATOR 2010 Conference Proceedings,
657–61, 2010.
ieee: M. Hunstig, T. Hemsel, and W. Sextro, “Improving the Performance of Piezoelectric
Inertia Motors,” in ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–661.
mla: Hunstig, Matthias, et al. “Improving the Performance of Piezoelectric Inertia
Motors.” ACTUATOR 2010 Conference Proceedings, 2010, pp. 657–61.
short: 'M. Hunstig, T. Hemsel, W. Sextro, in: ACTUATOR 2010 Conference Proceedings,
2010, pp. 657–661.'
date_created: 2019-05-13T10:10:31Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
page: 657-661
publication: ACTUATOR 2010 Conference Proceedings
publication_identifier:
issn:
- 0924-4247
quality_controlled: '1'
status: public
title: Improving the Performance of Piezoelectric Inertia Motors
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '9755'
author:
- first_name: Verena
full_name: Kraft , Verena
last_name: 'Kraft '
- first_name: C.
full_name: Bauch, C.
last_name: Bauch
- first_name: M.
full_name: Nückel, M.
last_name: Nückel
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Kraft V, Bauch C, Nückel M, Hemsel T. Konzeption und Aufbau eines Langzeitforschungsstandes
zur lichttechnischen Charakterisierung von organischen Leuchtdioden (OLEDs). In:
19. Gemeinschaftstagung LICHT 2010. Wien, Österreich; 2010.'
apa: Kraft , V., Bauch, C., Nückel, M., & Hemsel, T. (2010). Konzeption und
Aufbau eines Langzeitforschungsstandes zur lichttechnischen Charakterisierung
von organischen Leuchtdioden (OLEDs). In 19. Gemeinschaftstagung LICHT 2010.
Wien, Österreich.
bibtex: '@inproceedings{Kraft _Bauch_Nückel_Hemsel_2010, place={Wien, Österreich},
title={Konzeption und Aufbau eines Langzeitforschungsstandes zur lichttechnischen
Charakterisierung von organischen Leuchtdioden (OLEDs)}, booktitle={19. Gemeinschaftstagung
LICHT 2010}, author={Kraft , Verena and Bauch, C. and Nückel, M. and Hemsel, Tobias},
year={2010} }'
chicago: Kraft , Verena, C. Bauch, M. Nückel, and Tobias Hemsel. “Konzeption Und
Aufbau Eines Langzeitforschungsstandes Zur Lichttechnischen Charakterisierung
von Organischen Leuchtdioden (OLEDs).” In 19. Gemeinschaftstagung LICHT 2010.
Wien, Österreich, 2010.
ieee: V. Kraft , C. Bauch, M. Nückel, and T. Hemsel, “Konzeption und Aufbau eines
Langzeitforschungsstandes zur lichttechnischen Charakterisierung von organischen
Leuchtdioden (OLEDs),” in 19. Gemeinschaftstagung LICHT 2010, 2010.
mla: Kraft , Verena, et al. “Konzeption Und Aufbau Eines Langzeitforschungsstandes
Zur Lichttechnischen Charakterisierung von Organischen Leuchtdioden (OLEDs).”
19. Gemeinschaftstagung LICHT 2010, 2010.
short: 'V. Kraft , C. Bauch, M. Nückel, T. Hemsel, in: 19. Gemeinschaftstagung LICHT
2010, Wien, Österreich, 2010.'
date_created: 2019-05-13T10:11:42Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
place: Wien, Österreich
popular_science: '1'
publication: 19. Gemeinschaftstagung LICHT 2010
status: public
title: Konzeption und Aufbau eines Langzeitforschungsstandes zur lichttechnischen
Charakterisierung von organischen Leuchtdioden (OLEDs)
type: conference
user_id: '55222'
year: '2010'
...
---
_id: '9756'
abstract:
- lang: eng
text: Dieser Beitrag fasst die bekannten analytischen Berechnungsmethoden für piezoelektrische
Ultraschallverbundschwinger zusammen und gibt anhand typischer Beispiele Anleitungen
zur Lösung theoretischer und technischer Fragen bei deren Entwicklung. Zunächst
werden die passiven, in der Regel metallischen Komponenten von Verbundschwingern
als Stab- oder Plattensysteme mit homogen verteilten Feder-, Masse und Dämpfungseigenschaften
beschrieben. Hier breitet sich die Schwingungsenergie in Form stehender und fortschreitender
Wellen zum akustischen Verbraucher hin aus. Es folgt eine gleichwertige und schaltungstreue
Darstellung durch elektrische oder mechanische Vierpole, die für den Entwicklungsingenieur
leichter zu handhaben sind und in Netzwerken direkt mit Masons Ersatzschaltung
des piezoelektrischen Wandlers gekoppelt werden können. Danach werden die wichtigsten,
messtechnisch zugänglichen Parameter anhand eines in Resonanznähe zulässigen Ersatzmodells
mit konzentrierten elektrischen bzw. mechanischen Komponenten definiert. Als Schwerpunkt
wird anschließend deren analytische Berechnung und messtechnische Verifizierung
an typischen Beispielen demonstriert. Es folgen wichtige technische Informationen
über Frequenzkorrekturen, Schallgeschwindigkeitsdispersion, Leistungs- und Belastbarkeitsgrenzen
der Komponenten und andere wertvolle praktische Hinweise.
author:
- first_name: Ernst-Günter
full_name: Lierke, Ernst-Günter
last_name: Lierke
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Lierke E-G, Littmann W, Hemsel T. Zur Theorie der piezoelektrischen Ultraschallverbundschwinger
mit praktischen Schlussfolgerungen für den Entwicklungsingenieur. Veröffentlichung
der Universität Paderborn. 2010.
apa: Lierke, E.-G., Littmann, W., & Hemsel, T. (2010). Zur Theorie der piezoelektrischen
Ultraschallverbundschwinger mit praktischen Schlussfolgerungen für den Entwicklungsingenieur.
Veröffentlichung Der Universität Paderborn.
bibtex: '@article{Lierke_Littmann_Hemsel_2010, title={Zur Theorie der piezoelektrischen
Ultraschallverbundschwinger mit praktischen Schlussfolgerungen für den Entwicklungsingenieur},
journal={Veröffentlichung der Universität Paderborn}, author={Lierke, Ernst-Günter
and Littmann, Walter and Hemsel, Tobias}, year={2010} }'
chicago: Lierke, Ernst-Günter, Walter Littmann, and Tobias Hemsel. “Zur Theorie
Der Piezoelektrischen Ultraschallverbundschwinger Mit Praktischen Schlussfolgerungen
Für Den Entwicklungsingenieur.” Veröffentlichung Der Universität Paderborn,
2010.
ieee: E.-G. Lierke, W. Littmann, and T. Hemsel, “Zur Theorie der piezoelektrischen
Ultraschallverbundschwinger mit praktischen Schlussfolgerungen für den Entwicklungsingenieur,”
Veröffentlichung der Universität Paderborn, 2010.
mla: Lierke, Ernst-Günter, et al. “Zur Theorie Der Piezoelektrischen Ultraschallverbundschwinger
Mit Praktischen Schlussfolgerungen Für Den Entwicklungsingenieur.” Veröffentlichung
Der Universität Paderborn, 2010.
short: E.-G. Lierke, W. Littmann, T. Hemsel, Veröffentlichung Der Universität Paderborn
(2010).
date_created: 2019-05-13T10:14:21Z
date_updated: 2022-01-06T07:04:19Z
department:
- _id: '151'
language:
- iso: eng
publication: Veröffentlichung der Universität Paderborn
publication_identifier:
issn:
- 1948-5719
status: public
title: Zur Theorie der piezoelektrischen Ultraschallverbundschwinger mit praktischen
Schlussfolgerungen für den Entwicklungsingenieur
type: journal_article
user_id: '55222'
year: '2010'
...