---
_id: '9568'
abstract:
- lang: eng
text: A simple pre-stress estimate method of Langevin transducers is studied. The
measurement setup consists of a capacitor, an impedance converter and a voltmeter.
Based on the piezoelectric equation and the basic circuit theory, the mathematical
expression between the pre-stress and the voltage across the capacitor is derived.
The pre-stress level can then be calculated out of the measurement of the capacitor
voltage. In order to evaluate the precision of this method, a force washer is
used to measure the pre-stress of the Langevin transducer. The result shows the
pre-stress level obtained from this method is 30-40\% higher than the pre-stress
level measured by the force washer. This method is simple and can be used to estimate
the pre-stress of various Langevin transducers. The precision of this method can
be raised if d33 is identified under different pre-stress levels.
author:
- first_name: Fu
full_name: Bo, Fu
last_name: Bo
- first_name: Li
full_name: Ting, Li
last_name: Ting
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Bo F, Ting L, Hemsel T. A simple pre-stress estimating method of langevin
transducers. In: Piezoelectricity, Acoustic Waves, and Device Applications,
2008. SPAWDA 2008. Symposium On. ; 2008:324-327. doi:10.1109/SPAWDA.2008.4775801'
apa: Bo, F., Ting, L., & Hemsel, T. (2008). A simple pre-stress estimating method
of langevin transducers. In Piezoelectricity, Acoustic Waves, and Device Applications,
2008. SPAWDA 2008. Symposium on (pp. 324–327). https://doi.org/10.1109/SPAWDA.2008.4775801
bibtex: '@inproceedings{Bo_Ting_Hemsel_2008, title={A simple pre-stress estimating
method of langevin transducers}, DOI={10.1109/SPAWDA.2008.4775801},
booktitle={Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA
2008. Symposium on}, author={Bo, Fu and Ting, Li and Hemsel, Tobias}, year={2008},
pages={324–327} }'
chicago: Bo, Fu, Li Ting, and Tobias Hemsel. “A Simple Pre-Stress Estimating Method
of Langevin Transducers.” In Piezoelectricity, Acoustic Waves, and Device Applications,
2008. SPAWDA 2008. Symposium On, 324–27, 2008. https://doi.org/10.1109/SPAWDA.2008.4775801.
ieee: F. Bo, L. Ting, and T. Hemsel, “A simple pre-stress estimating method of langevin
transducers,” in Piezoelectricity, Acoustic Waves, and Device Applications,
2008. SPAWDA 2008. Symposium on, 2008, pp. 324–327.
mla: Bo, Fu, et al. “A Simple Pre-Stress Estimating Method of Langevin Transducers.”
Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008.
Symposium On, 2008, pp. 324–27, doi:10.1109/SPAWDA.2008.4775801.
short: 'F. Bo, L. Ting, T. Hemsel, in: Piezoelectricity, Acoustic Waves, and Device
Applications, 2008. SPAWDA 2008. Symposium On, 2008, pp. 324–327.'
date_created: 2019-04-29T11:16:13Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1109/SPAWDA.2008.4775801
keyword:
- capacitors
- impedance convertors
- piezoelectric transducers
- stress analysis
- Langevin transducers
- basic circuit theory
- capacitor
- impedance converter
- piezoelectric equation
- pre-stress estimating method
- voltmeter
- Capacitors
- Educational institutions
- Equations
- Force measurement
- Impedance measurement
- Manufacturing
- Mechatronics
- Piezoelectric transducers
- Voltage
- Voltmeters
- Langevin transducer
- capacitor
- piezoelectric element
- pre-stress
language:
- iso: eng
page: 324-327
publication: Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA
2008. Symposium on
status: public
title: A simple pre-stress estimating method of langevin transducers
type: conference
user_id: '55222'
year: '2008'
...
---
_id: '9569'
abstract:
- lang: eng
text: Ultrasonic hyperthermia and thermo-ablation are two promising alternatives
for local overheating of deep-seated human tumours. After a short characterisation
of the two techniques and the identification of the main parameters, results of
an analytical theory of local heat up, cooling, and heat diffusion are presented.
The theory is based on a spherical model for hyperthermia with a critical thermal
dose and on a cylinder-symmetrical model for thermo-ablation with a critical temperature
threshold for thermal toxicity and cell death through coagulative necrosis. Two
representative hard ware concepts are discussed. The hyperthermia applicator consists
of a MHz transducer, which rotates concentrically in a water filled capsule with
acoustically transparent window, and radiates collimated or focussed ultrasound
under 45$\,^{\circ}$ into a concentric target area of nearly spherical symmetry.
The applicator for thermo-ablation is a MHz transducer which radiates high intensity
focussed ultrasound (HIFU) into "cigar shaped" target areas at the focal zone.
Typical therapy diagrams for both techniques are presented. They show therapeutic
target volumes as functions of the therapy time with the peak temperature or the
radiated acoustic power as parameters. These diagrams are discussed under consideration
of power requirement, maximal sound intensity, and power efficiency at close to
optimized frequency conditions.
author:
- first_name: Ernst-Günter
full_name: Lierke, Ernst-Günter
last_name: Lierke
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Lierke E-G, Hemsel T. Local Ultrasonic Hyperthermia and Thermo-ablation: A
Description and Theoretical Evaluation of Two Alternative Concepts for the Heat
Therapy of Tumours. Acta Acustica united with Acustica. 2008;94(3):369-381.
doi:10.3813/AAA.918044'
apa: 'Lierke, E.-G., & Hemsel, T. (2008). Local Ultrasonic Hyperthermia and
Thermo-ablation: A Description and Theoretical Evaluation of Two Alternative Concepts
for the Heat Therapy of Tumours. Acta Acustica United with Acustica, 94(3),
369–381. https://doi.org/10.3813/AAA.918044'
bibtex: '@article{Lierke_Hemsel_2008, title={Local Ultrasonic Hyperthermia and Thermo-ablation:
A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat
Therapy of Tumours}, volume={94}, DOI={10.3813/AAA.918044},
number={3}, journal={Acta Acustica united with Acustica}, author={Lierke, Ernst-Günter
and Hemsel, Tobias}, year={2008}, pages={369–381} }'
chicago: 'Lierke, Ernst-Günter, and Tobias Hemsel. “Local Ultrasonic Hyperthermia
and Thermo-Ablation: A Description and Theoretical Evaluation of Two Alternative
Concepts for the Heat Therapy of Tumours.” Acta Acustica United with Acustica
94, no. 3 (2008): 369–81. https://doi.org/10.3813/AAA.918044.'
ieee: 'E.-G. Lierke and T. Hemsel, “Local Ultrasonic Hyperthermia and Thermo-ablation:
A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat
Therapy of Tumours,” Acta Acustica united with Acustica, vol. 94, no. 3,
pp. 369–381, 2008.'
mla: 'Lierke, Ernst-Günter, and Tobias Hemsel. “Local Ultrasonic Hyperthermia and
Thermo-Ablation: A Description and Theoretical Evaluation of Two Alternative Concepts
for the Heat Therapy of Tumours.” Acta Acustica United with Acustica, vol.
94, no. 3, 2008, pp. 369–81, doi:10.3813/AAA.918044.'
short: E.-G. Lierke, T. Hemsel, Acta Acustica United with Acustica 94 (2008) 369–381.
date_created: 2019-04-29T11:55:56Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.3813/AAA.918044
intvolume: ' 94'
issue: '3'
language:
- iso: eng
page: 369-381
publication: Acta Acustica united with Acustica
quality_controlled: '1'
status: public
title: 'Local Ultrasonic Hyperthermia and Thermo-ablation: A Description and Theoretical
Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours'
type: journal_article
user_id: '55222'
volume: 94
year: '2008'
...
---
_id: '9570'
abstract:
- lang: eng
text: "EN: Although the use of new actuator technologies is quite enthusiastic,
the realization of innovative systems based on these principles fails because
of doubts in dependability. Until now, new working principles for actuators have
not been systematically investigated in the means of dependability. Therefore
we developed a proceeding for a dependability-oriented evaluation of technologies.
This is shown in the case of shape memory alloy actuators. \r\nDE: Die Realisierung
von Systemen mittels innovativer Aktortechnologien scheitert oftmals an der Skepsis
gegenüber der Verlässlichkeit (Vertrauen in die zuverlässige und sichere Funktionalität
der Technologie). Diese liegt darin begründet, dass neue Aktortechnologien bzw.
die Integration von innovativen physikalischen Wirkprinzipen innerhalb neuer Aktorkonzepte
bisher noch nicht systematisch im Kontext der Verlässlichkeit untersucht werden.
Daher haben wir ein Vorgehen zur verlässlichkeitsorientierten Technologiebewertung
entwickelt. Neben der detaillierten Darstellung des Vorgehensmodells wird es exemplarisch
anhand von Formgedächtnislegierungen zur Entwicklung innovativer Antriebslösungen
angewendet."
author:
- first_name: Thomas
full_name: Müller, Thomas
last_name: Müller
- first_name: Florian
full_name: Schiedeck, Florian
last_name: Schiedeck
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Müller T, Schiedeck F, Hemsel T. Verlässlichkeitorientierte Technologiebewertung
innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen. In: 2.
Tagung Des DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer
Systeme: Absicherung Der Systemzuverlässigkeit, Koblenz. ; 2008.'
apa: 'Müller, T., Schiedeck, F., & Hemsel, T. (2008). Verlässlichkeitorientierte
Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen.
In 2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und adaptronischer
Systeme: Absicherung der Systemzuverlässigkeit, Koblenz.'
bibtex: '@inproceedings{Müller_Schiedeck_Hemsel_2008, title={Verlässlichkeitorientierte
Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen},
booktitle={2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und
adaptronischer Systeme: Absicherung der Systemzuverlässigkeit, Koblenz}, author={Müller,
Thomas and Schiedeck, Florian and Hemsel, Tobias}, year={2008} }'
chicago: 'Müller, Thomas, Florian Schiedeck, and Tobias Hemsel. “Verlässlichkeitorientierte
Technologiebewertung Innovativer Aktortechnologien Am Beispiel von Formgedächtnislegierungen.”
In 2. Tagung Des DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer
Systeme: Absicherung Der Systemzuverlässigkeit, Koblenz, 2008.'
ieee: 'T. Müller, F. Schiedeck, and T. Hemsel, “Verlässlichkeitorientierte Technologiebewertung
innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen,” in 2.
Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und adaptronischer
Systeme: Absicherung der Systemzuverlässigkeit, Koblenz, 2008.'
mla: 'Müller, Thomas, et al. “Verlässlichkeitorientierte Technologiebewertung Innovativer
Aktortechnologien Am Beispiel von Formgedächtnislegierungen.” 2. Tagung Des
DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer Systeme:
Absicherung Der Systemzuverlässigkeit, Koblenz, 2008.'
short: 'T. Müller, F. Schiedeck, T. Hemsel, in: 2. Tagung Des DVM -- Arbeitskreis
Zuverlässigkeit Mechatronischer Und Adaptronischer Systeme: Absicherung Der Systemzuverlässigkeit,
Koblenz, 2008.'
date_created: 2019-04-29T11:57:41Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
keyword:
- 'EN: Dependability'
- Reliability
- Evaluation of Technology
- Actuators
- 'Shape Memory Alloys DE: Verl{\'
language:
- iso: eng
publication: '2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und
adaptronischer Systeme: Absicherung der Systemzuverlässigkeit, Koblenz'
status: public
title: Verlässlichkeitorientierte Technologiebewertung innovativer Aktortechnologien
am Beispiel von Formgedächtnislegierungen
type: conference
user_id: '55222'
year: '2008'
...
---
_id: '9571'
abstract:
- lang: eng
text: 'Several positioning tasks demand translatory drive instead of rotary motion.
To achieve drives that are capable, e.g., to drive the sunroof of a car or to
lift a car''s window, multiple miniaturized motors can be combined. But in this
case many other questions arise: The electromechanical behavior of the individual
motors differs slightly, the motor characteristics are strongly dependent on the
driving parameters and the driven load, many applications need some extra power
for special cases like overcoming higher forces periodically. Thus, the bundle
of motors has to act well-organized and at last controlled to get an optimized
drive that is not oversized and costly.'
author:
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Thomas
full_name: Sattel, Thomas
last_name: Sattel
- first_name: Piotr
full_name: Vasiljev, Piotr
last_name: Vasiljev
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: Mracek M, Hemsel T, Sattel T, Vasiljev P, Wallaschek J. Driving concepts for
bundled ultrasonic linear motors. Journal of Electroceramics. 2008;20(3-4):153-158.
doi:10.1007/s10832-007-9123-5
apa: Mracek, M., Hemsel, T., Sattel, T., Vasiljev, P., & Wallaschek, J. (2008).
Driving concepts for bundled ultrasonic linear motors. Journal of Electroceramics,
20(3–4), 153–158. https://doi.org/10.1007/s10832-007-9123-5
bibtex: '@article{Mracek_Hemsel_Sattel_Vasiljev_Wallaschek_2008, title={Driving
concepts for bundled ultrasonic linear motors}, volume={20}, DOI={10.1007/s10832-007-9123-5},
number={3–4}, journal={Journal of Electroceramics}, publisher={Springer US}, author={Mracek,
Maik and Hemsel, Tobias and Sattel, Thomas and Vasiljev, Piotr and Wallaschek,
Jörg}, year={2008}, pages={153–158} }'
chicago: 'Mracek, Maik, Tobias Hemsel, Thomas Sattel, Piotr Vasiljev, and Jörg Wallaschek.
“Driving Concepts for Bundled Ultrasonic Linear Motors.” Journal of Electroceramics
20, no. 3–4 (2008): 153–58. https://doi.org/10.1007/s10832-007-9123-5.'
ieee: M. Mracek, T. Hemsel, T. Sattel, P. Vasiljev, and J. Wallaschek, “Driving
concepts for bundled ultrasonic linear motors,” Journal of Electroceramics,
vol. 20, no. 3–4, pp. 153–158, 2008.
mla: Mracek, Maik, et al. “Driving Concepts for Bundled Ultrasonic Linear Motors.”
Journal of Electroceramics, vol. 20, no. 3–4, Springer US, 2008, pp. 153–58,
doi:10.1007/s10832-007-9123-5.
short: M. Mracek, T. Hemsel, T. Sattel, P. Vasiljev, J. Wallaschek, Journal of Electroceramics
20 (2008) 153–158.
date_created: 2019-04-29T12:27:25Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1007/s10832-007-9123-5
intvolume: ' 20'
issue: 3-4
keyword:
- Ultrasonic linear motor
- High power
- Control
- Modeling
- Characteristics
language:
- iso: eng
page: 153-158
publication: Journal of Electroceramics
publication_identifier:
issn:
- 1385-3449
publisher: Springer US
quality_controlled: '1'
status: public
title: Driving concepts for bundled ultrasonic linear motors
type: journal_article
user_id: '55222'
volume: 20
year: '2008'
...
---
_id: '9573'
abstract:
- lang: eng
text: 'Integrating dependability in self-optimizing systems is a challenging task.
Self-optimizing systems incorporate on the one hand the opportunity to apply novel
solutions to complex mechatronic systems, but on the other hand constitute a possible
risk because of non-determined behavior. The dependability concept in this paper
covers both aspects: Increasing safety with selfoptimization and minimizing the
risk of self-optimization. This dependability concept is combined with the self-optimization
process of the active guidance module which is currently under development at
the Collaborative Research Center 614 at the University of Paderborn.'
author:
- first_name: Christoph
full_name: Sondermann-Wölke, Christoph
last_name: Sondermann-Wölke
- first_name: Jens
full_name: Geisler, Jens
last_name: Geisler
- first_name: Thomas
full_name: Müler, Thomas
last_name: Müler
- first_name: Ansgar
full_name: Trächtler, Ansgar
last_name: Trächtler
- first_name: Joachim
full_name: Böcker, Joachim
last_name: Böcker
citation:
ama: 'Sondermann-Wölke C, Geisler J, Müler T, Trächtler A, Böcker J. The active
guidance module of a rail-bound vehicle as an application for the dependability
oriented design in self-optimizing systems. In: ASME 2008 -- International
Design Engineering Technical Conferences \& Computers and Information in Engineering
Conference (IDETC/CIE). New York; 2008.'
apa: Sondermann-Wölke, C., Geisler, J., Müler, T., Trächtler, A., & Böcker,
J. (2008). The active guidance module of a rail-bound vehicle as an application
for the dependability oriented design in self-optimizing systems. In ASME 2008
-- International Design Engineering Technical Conferences \& Computers and
Information in Engineering Conference (IDETC/CIE). New York.
bibtex: '@inproceedings{Sondermann-Wölke_Geisler_Müler_Trächtler_Böcker_2008, place={New
York}, title={The active guidance module of a rail-bound vehicle as an application
for the dependability oriented design in self-optimizing systems}, booktitle={ASME
2008 -- International Design Engineering Technical Conferences \& Computers
and Information in Engineering Conference (IDETC/CIE)}, author={Sondermann-Wölke,
Christoph and Geisler, Jens and Müler, Thomas and Trächtler, Ansgar and Böcker,
Joachim}, year={2008} }'
chicago: Sondermann-Wölke, Christoph, Jens Geisler, Thomas Müler, Ansgar Trächtler,
and Joachim Böcker. “The Active Guidance Module of a Rail-Bound Vehicle as an
Application for the Dependability Oriented Design in Self-Optimizing Systems.”
In ASME 2008 -- International Design Engineering Technical Conferences \&
Computers and Information in Engineering Conference (IDETC/CIE). New York,
2008.
ieee: C. Sondermann-Wölke, J. Geisler, T. Müler, A. Trächtler, and J. Böcker, “The
active guidance module of a rail-bound vehicle as an application for the dependability
oriented design in self-optimizing systems,” in ASME 2008 -- International
Design Engineering Technical Conferences \& Computers and Information in Engineering
Conference (IDETC/CIE), 2008.
mla: Sondermann-Wölke, Christoph, et al. “The Active Guidance Module of a Rail-Bound
Vehicle as an Application for the Dependability Oriented Design in Self-Optimizing
Systems.” ASME 2008 -- International Design Engineering Technical Conferences
\& Computers and Information in Engineering Conference (IDETC/CIE), 2008.
short: 'C. Sondermann-Wölke, J. Geisler, T. Müler, A. Trächtler, J. Böcker, in:
ASME 2008 -- International Design Engineering Technical Conferences \& Computers
and Information in Engineering Conference (IDETC/CIE), New York, 2008.'
date_created: 2019-04-29T12:36:03Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
place: New York
publication: ASME 2008 -- International Design Engineering Technical Conferences \&
Computers and Information in Engineering Conference (IDETC/CIE)
status: public
title: The active guidance module of a rail-bound vehicle as an application for the
dependability oriented design in self-optimizing systems
type: conference
user_id: '55222'
year: '2008'
...
---
_id: '9574'
abstract:
- lang: eng
text: For devices having non-linear contact, load plays a fundamental role. Variations
in the characteristics of the load cause change in eigenfrequency and amplitude
of the vibration. In most technical applications, this unwanted behaviour is cancelled
by the use of control algorithms. However, multiple applications, like bond quality
monitoring or chemical and pressure sensors, have found that the load may be characterised
by interpreting the change in characteristics of a resonant vibrating device used
as a sensor. Surgical resection of tumours is a very difficult task. After localising
the tumour by the use of imaging techniques, the resection demands the surgeon
to decide where and what to resect based on visual and tactile differentiation
of tumour and healthy tissue. Exactness of this process could be enhanced if we
can provide the surgeon with a device capable of evaluating mechanical characteristics
of the tissue much more accurately than the surgeon himself can do. As the mechanical
characteristics of tumour and healthy tissue differ but slightly, the task is
to design a system with high sensitivity. Therefore, we have developed a resonant
actuator-sensor that allows the differentiation among distinct media that have
similar mechanical characteristics to tumour and healthy tissue using a piezoelectric
bimorph. The design is based on the detection and evaluation of frequency shift
and amplitude variation of the fundamental and higher harmonics using one layer
for the resonant excitation of vibration and the other one as the sensing element.
author:
- first_name: Ralf
full_name: Stroop, Ralf
last_name: Stroop
- first_name: David Oliva
full_name: Uribe, David Oliva
last_name: Uribe
- first_name: Melisa Orta
full_name: Martinez, Melisa Orta
last_name: Martinez
- first_name: Michael
full_name: Brökelmann, Michael
last_name: Brökelmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: Stroop R, Uribe DO, Martinez MO, Brökelmann M, Hemsel T, Wallaschek J. Tactile
tissue characterisation by piezoelectric systems. Journal of Electroceramics.
2008;20(3-4):237-241. doi:10.1007/s10832-007-9183-6
apa: Stroop, R., Uribe, D. O., Martinez, M. O., Brökelmann, M., Hemsel, T., &
Wallaschek, J. (2008). Tactile tissue characterisation by piezoelectric systems.
Journal of Electroceramics, 20(3–4), 237–241. https://doi.org/10.1007/s10832-007-9183-6
bibtex: '@article{Stroop_Uribe_Martinez_Brökelmann_Hemsel_Wallaschek_2008, title={Tactile
tissue characterisation by piezoelectric systems}, volume={20}, DOI={10.1007/s10832-007-9183-6},
number={3–4}, journal={Journal of Electroceramics}, publisher={Springer US}, author={Stroop,
Ralf and Uribe, David Oliva and Martinez, Melisa Orta and Brökelmann, Michael
and Hemsel, Tobias and Wallaschek, Jörg}, year={2008}, pages={237–241} }'
chicago: 'Stroop, Ralf, David Oliva Uribe, Melisa Orta Martinez, Michael Brökelmann,
Tobias Hemsel, and Jörg Wallaschek. “Tactile Tissue Characterisation by Piezoelectric
Systems.” Journal of Electroceramics 20, no. 3–4 (2008): 237–41. https://doi.org/10.1007/s10832-007-9183-6.'
ieee: R. Stroop, D. O. Uribe, M. O. Martinez, M. Brökelmann, T. Hemsel, and J. Wallaschek,
“Tactile tissue characterisation by piezoelectric systems,” Journal of Electroceramics,
vol. 20, no. 3–4, pp. 237–241, 2008.
mla: Stroop, Ralf, et al. “Tactile Tissue Characterisation by Piezoelectric Systems.”
Journal of Electroceramics, vol. 20, no. 3–4, Springer US, 2008, pp. 237–41,
doi:10.1007/s10832-007-9183-6.
short: R. Stroop, D.O. Uribe, M.O. Martinez, M. Brökelmann, T. Hemsel, J. Wallaschek,
Journal of Electroceramics 20 (2008) 237–241.
date_created: 2019-04-29T12:50:44Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1007/s10832-007-9183-6
intvolume: ' 20'
issue: 3-4
keyword:
- Piezo ceramics
- Bimorph
- Tactile sensor
- Tumour tissue
language:
- iso: eng
page: 237-241
publication: Journal of Electroceramics
publication_identifier:
issn:
- 1385-3449
publisher: Springer US
quality_controlled: '1'
status: public
title: Tactile tissue characterisation by piezoelectric systems
type: journal_article
user_id: '55222'
volume: 20
year: '2008'
...
---
_id: '9575'
abstract:
- lang: eng
text: Many ultrasonic processes are based on the mechanical contact of oscillating
parts. Within ultrasonic machining (drilling, milling, grinding) micro impacts
lead to abrasion at the processed workpiece and hopefully do not damage the tool.
In ultrasonic motors ideally neither part gets worn. Thus the appropriate design
of contact partners as well as their kinematics is a substantial task during the
development of such devices. A first step to optimize contact mechanics is to
understand their behavior and dependencies on parameter variations, such as vibration
amplitude and pre-stress of the impacting parts. For a detailed understanding
models validated with convincing experimental data from measurements are absolutely
essential. This paper focuses on simple vibro-impact experiments which can be
used as benchmark data for future models. The setup of the experiment and first
experimental investigations are described in detail.
author:
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: Christian
full_name: Potthast, Christian
last_name: Potthast
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Thomas
full_name: Sattel, Thomas
last_name: Sattel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: Twiefel J, Potthast C, Mracek M, Hemsel T, Sattel T, Wallaschek J. Fundamental
experiments as benchmark problems for modeling ultrasonic micro-impact processes.
Journal of Electroceramics. 2008;20(3-4):209-214. doi:10.1007/s10832-007-9169-4
apa: Twiefel, J., Potthast, C., Mracek, M., Hemsel, T., Sattel, T., & Wallaschek,
J. (2008). Fundamental experiments as benchmark problems for modeling ultrasonic
micro-impact processes. Journal of Electroceramics, 20(3–4), 209–214.
https://doi.org/10.1007/s10832-007-9169-4
bibtex: '@article{Twiefel_Potthast_Mracek_Hemsel_Sattel_Wallaschek_2008, title={Fundamental
experiments as benchmark problems for modeling ultrasonic micro-impact processes},
volume={20}, DOI={10.1007/s10832-007-9169-4},
number={3–4}, journal={Journal of Electroceramics}, publisher={Springer US}, author={Twiefel,
Jens and Potthast, Christian and Mracek, Maik and Hemsel, Tobias and Sattel, Thomas
and Wallaschek, Jörg}, year={2008}, pages={209–214} }'
chicago: 'Twiefel, Jens, Christian Potthast, Maik Mracek, Tobias Hemsel, Thomas
Sattel, and Jörg Wallaschek. “Fundamental Experiments as Benchmark Problems for
Modeling Ultrasonic Micro-Impact Processes.” Journal of Electroceramics
20, no. 3–4 (2008): 209–14. https://doi.org/10.1007/s10832-007-9169-4.'
ieee: J. Twiefel, C. Potthast, M. Mracek, T. Hemsel, T. Sattel, and J. Wallaschek,
“Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact
processes,” Journal of Electroceramics, vol. 20, no. 3–4, pp. 209–214,
2008.
mla: Twiefel, Jens, et al. “Fundamental Experiments as Benchmark Problems for Modeling
Ultrasonic Micro-Impact Processes.” Journal of Electroceramics, vol. 20,
no. 3–4, Springer US, 2008, pp. 209–14, doi:10.1007/s10832-007-9169-4.
short: J. Twiefel, C. Potthast, M. Mracek, T. Hemsel, T. Sattel, J. Wallaschek,
Journal of Electroceramics 20 (2008) 209–214.
date_created: 2019-04-29T13:06:13Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1007/s10832-007-9169-4
intvolume: ' 20'
issue: 3-4
keyword:
- Contact measurements
- Vibro-impact
- Ultrasonic application
language:
- iso: eng
page: 209-214
publication: Journal of Electroceramics
publication_identifier:
issn:
- 1385-3449
publisher: Springer US
quality_controlled: '1'
status: public
title: Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact
processes
type: journal_article
user_id: '55222'
volume: 20
year: '2008'
...
---
_id: '9576'
abstract:
- lang: eng
text: 'In neurosurgery, delineation of tumor boundaries during resection of brain
tumors is of substantial relevance. During operation distinction between tumor
and healthy tissue rely on the abilities of the surgeon based on visual and tactile
differentiation. In this paper a high sensitivity actuator-sensor system using
a piezoelectric bimorph is presented. Frequency shift and transfer function of
the bimorphpsilas voltages are detected and evaluated. Sensorpsilas sensitivity
is evaluated using two frequency controls strategies: A phase-locked loop (PLL)
and a self-oscillating circuit. Results of measurements conducted on gel-phantoms
are presented and discussed.'
author:
- first_name: David Oliva
full_name: Uribe, David Oliva
last_name: Uribe
- first_name: Ralf
full_name: Stroop, Ralf
last_name: Stroop
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: 'Uribe DO, Stroop R, Hemsel T, Wallaschek J. Development of a biomedical tissue
differentiation system using piezoelectric actuators. In: Frequency Control
Symposium, 2008 IEEE International. ; 2008:91-94. doi:10.1109/FREQ.2008.4622963'
apa: Uribe, D. O., Stroop, R., Hemsel, T., & Wallaschek, J. (2008). Development
of a biomedical tissue differentiation system using piezoelectric actuators. In
Frequency Control Symposium, 2008 IEEE International (pp. 91–94). https://doi.org/10.1109/FREQ.2008.4622963
bibtex: '@inproceedings{Uribe_Stroop_Hemsel_Wallaschek_2008, title={Development
of a biomedical tissue differentiation system using piezoelectric actuators},
DOI={10.1109/FREQ.2008.4622963},
booktitle={Frequency Control Symposium, 2008 IEEE International}, author={Uribe,
David Oliva and Stroop, Ralf and Hemsel, Tobias and Wallaschek, Jörg}, year={2008},
pages={91–94} }'
chicago: Uribe, David Oliva, Ralf Stroop, Tobias Hemsel, and Jörg Wallaschek. “Development
of a Biomedical Tissue Differentiation System Using Piezoelectric Actuators.”
In Frequency Control Symposium, 2008 IEEE International, 91–94, 2008. https://doi.org/10.1109/FREQ.2008.4622963.
ieee: D. O. Uribe, R. Stroop, T. Hemsel, and J. Wallaschek, “Development of a biomedical
tissue differentiation system using piezoelectric actuators,” in Frequency
Control Symposium, 2008 IEEE International, 2008, pp. 91–94.
mla: Uribe, David Oliva, et al. “Development of a Biomedical Tissue Differentiation
System Using Piezoelectric Actuators.” Frequency Control Symposium, 2008 IEEE
International, 2008, pp. 91–94, doi:10.1109/FREQ.2008.4622963.
short: 'D.O. Uribe, R. Stroop, T. Hemsel, J. Wallaschek, in: Frequency Control Symposium,
2008 IEEE International, 2008, pp. 91–94.'
date_created: 2019-04-29T13:07:39Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1109/FREQ.2008.4622963
keyword:
- biomedical measurement
- brain
- cancer
- neurophysiology
- phantoms
- phase locked loops
- piezoelectric actuators
- surgery
- tactile sensors
- transfer functions
- tumours
- PLL
- biomedical tissue differentiation system
- brain tumor resection
- frequency control
- frequency shift
- gel-phantom
- high sensitivity actuator-sensor system
- neurosurgery
- phase-locked loop
- piezoelectric actuators
- piezoelectric bimorph
- self-oscillating circuit
- sensor sensitivity
- tactile differentiation
- tactile sensor system
- transfer function
- tumor boundary
- visual differentiation
- Biomedical measurements
- Circuits
- Frequency control
- Neoplasms
- Neurosurgery
- Phase locked loops
- Piezoelectric actuators
- Surges
- Transfer functions
- Voltage
language:
- iso: eng
page: 91-94
publication: Frequency Control Symposium, 2008 IEEE International
publication_identifier:
issn:
- 1075-6787
quality_controlled: '1'
status: public
title: Development of a biomedical tissue differentiation system using piezoelectric
actuators
type: conference
user_id: '55222'
year: '2008'
...
---
_id: '15954'
author:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: C.
full_name: Howe, C.
last_name: Howe
- first_name: M.
full_name: Müller, M.
last_name: Müller
- first_name: W.
full_name: Rostek, W.
last_name: Rostek
citation:
ama: 'Tröster T, Howe C, Müller M, Rostek W. Development status and market potential
of hot formed ballistic steels. In: ; 2008.'
apa: Tröster, T., Howe, C., Müller, M., & Rostek, W. (2008). Development status
and market potential of hot formed ballistic steels. Presented at the Steels in
Cars and Trucks, Wiesbaden.
bibtex: '@inproceedings{Tröster_Howe_Müller_Rostek_2008, title={Development status
and market potential of hot formed ballistic steels}, author={Tröster, Thomas
and Howe, C. and Müller, M. and Rostek, W.}, year={2008} }'
chicago: Tröster, Thomas, C. Howe, M. Müller, and W. Rostek. “Development Status
and Market Potential of Hot Formed Ballistic Steels,” 2008.
ieee: T. Tröster, C. Howe, M. Müller, and W. Rostek, “Development status and market
potential of hot formed ballistic steels,” presented at the Steels in Cars and
Trucks, Wiesbaden, 2008.
mla: Tröster, Thomas, et al. Development Status and Market Potential of Hot Formed
Ballistic Steels. 2008.
short: 'T. Tröster, C. Howe, M. Müller, W. Rostek, in: 2008.'
conference:
end_date: 2008-06-05
location: Wiesbaden
name: Steels in Cars and Trucks
start_date: 2008-06-01
date_created: 2020-02-21T13:37:20Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
language:
- iso: eng
status: public
title: Development status and market potential of hot formed ballistic steels
type: conference
user_id: '72008'
year: '2008'
...
---
_id: '15955'
abstract:
- lang: eng
text: "The present paper reports on the effect of texture on the cyclic
stress-strain response\r\n(CSSR) and the fatigue life of ultrafine-grained (UFG)
interstitial-free (IF) steel. Tests in the lowcycle\r\nfatigue (LCF) regime were
conducted on material that was processed by the equal channel\r\nangular extrusion
(ECAE) technique along the so called “efficient” route 8E. This route has been\r\nshown
to result in a homogeneous microstructure with a high fraction of high angle grain\r\nboundaries
(HAGBs), which are beneficial for a stable CSSR. In addition, the evolution of
the\r\nmicrostructure was characterized by means of electron optical techniques,
including electron\r\nbackscattered diffraction, and by X-Ray diffractometry.
It was found that the initial texture of\r\nspecimens cut from the ECAE billet
along different orientations with respect to the extrusion\r\ndirection (ED) has
a substantial effect on the CSSR of the UFG IF steel. Furthermore, microscopy\r\nresults
indicated the notable influence of the last ECAE processing step on the evolution
of damage\r\nin the material."
author:
- first_name: Thomas
full_name: Niendorf, Thomas
last_name: Niendorf
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
- first_name: Hans J.
full_name: Maier, Hans J.
last_name: Maier
- first_name: Ibrahim
full_name: Karaman, Ibrahim
last_name: Karaman
citation:
ama: Niendorf T, Marten T, Maier HJ, Karaman I. The Effect of Texture on the Fatigue
Properties of Ultrafine-Grained Interstitial-Free Steel. Materials Science
Forum. 2008;584-586:864-869. doi:10.4028/www.scientific.net/msf.584-586.864
apa: Niendorf, T., Marten, T., Maier, H. J., & Karaman, I. (2008). The Effect
of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel.
Materials Science Forum, 584–586, 864–869. https://doi.org/10.4028/www.scientific.net/msf.584-586.864
bibtex: '@article{Niendorf_Marten_Maier_Karaman_2008, title={The Effect of Texture
on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel}, volume={584–586},
DOI={10.4028/www.scientific.net/msf.584-586.864},
journal={Materials Science Forum}, author={Niendorf, Thomas and Marten, Thorsten
and Maier, Hans J. and Karaman, Ibrahim}, year={2008}, pages={864–869} }'
chicago: 'Niendorf, Thomas, Thorsten Marten, Hans J. Maier, and Ibrahim Karaman.
“The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free
Steel.” Materials Science Forum 584–586 (2008): 864–69. https://doi.org/10.4028/www.scientific.net/msf.584-586.864.'
ieee: T. Niendorf, T. Marten, H. J. Maier, and I. Karaman, “The Effect of Texture
on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel,” Materials
Science Forum, vol. 584–586, pp. 864–869, 2008.
mla: Niendorf, Thomas, et al. “The Effect of Texture on the Fatigue Properties of
Ultrafine-Grained Interstitial-Free Steel.” Materials Science Forum, vol.
584–586, 2008, pp. 864–69, doi:10.4028/www.scientific.net/msf.584-586.864.
short: T. Niendorf, T. Marten, H.J. Maier, I. Karaman, Materials Science Forum 584–586
(2008) 864–869.
date_created: 2020-02-21T13:41:59Z
date_updated: 2022-01-06T06:52:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.4028/www.scientific.net/msf.584-586.864
language:
- iso: eng
page: 864-869
publication: Materials Science Forum
publication_identifier:
issn:
- 1662-9752
publication_status: published
status: public
title: The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free
Steel
type: journal_article
user_id: '72008'
volume: 584-586
year: '2008'
...
---
_id: '9572'
application_date: 07.05.2007
application_number: 'DE102007021339A1 '
author:
- first_name: Volker
full_name: Rischmueller, Volker
last_name: Rischmueller
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
- first_name: Peter
full_name: Froehlich, Peter
last_name: Froehlich
- first_name: Walter
full_name: Haussecker, Walter
last_name: Haussecker
- first_name: Vincent
full_name: Rieger, Vincent
last_name: Rieger
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: Dirk
full_name: Guenther, Dirk
last_name: Guenther
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Rischmueller V, Wallaschek J, Froehlich P, et al. Patent EP2156480: Piezoelektrische
Antriebsvorrichtung / Piezoelectric Drive Unit. Published online 2008.'
apa: 'Rischmueller, V., Wallaschek, J., Froehlich, P., Haussecker, W., Rieger, V.,
Twiefel, J., Guenther, D., & Hemsel, T. (2008). Patent EP2156480: Piezoelektrische
Antriebsvorrichtung / Piezoelectric Drive Unit.'
bibtex: '@article{Rischmueller_Wallaschek_Froehlich_Haussecker_Rieger_Twiefel_Guenther_Hemsel_2008,
title={Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric
Drive Unit}, author={Rischmueller, Volker and Wallaschek, Jörg and Froehlich,
Peter and Haussecker, Walter and Rieger, Vincent and Twiefel, Jens and Guenther,
Dirk and Hemsel, Tobias}, year={2008} }'
chicago: 'Rischmueller, Volker, Jörg Wallaschek, Peter Froehlich, Walter Haussecker,
Vincent Rieger, Jens Twiefel, Dirk Guenther, and Tobias Hemsel. “Patent EP2156480:
Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit,” 2008.'
ieee: 'V. Rischmueller et al., “Patent EP2156480: Piezoelektrische Antriebsvorrichtung
/ Piezoelectric Drive Unit.” 2008.'
mla: 'Rischmueller, Volker, et al. Patent EP2156480: Piezoelektrische Antriebsvorrichtung
/ Piezoelectric Drive Unit. 2008.'
short: V. Rischmueller, J. Wallaschek, P. Froehlich, W. Haussecker, V. Rieger, J.
Twiefel, D. Guenther, T. Hemsel, (2008).
date_created: 2019-04-29T12:28:53Z
date_updated: 2022-01-06T12:22:51Z
department:
- _id: '151'
ipc: H01L 41/09, B60J 1/17
ipn: EP000002156480B1
publication_date: 21.12.2011
status: public
title: 'Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive
Unit'
type: patent
user_id: '210'
year: '2008'
...
---
_id: '33878'
author:
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: W.
full_name: Rostek, W.
last_name: Rostek
- first_name: J.
full_name: Böke, J.
last_name: Böke
- first_name: R.
full_name: Erhardt, R.
last_name: Erhardt
citation:
ama: 'Tröster T, Rostek W, Böke J, Erhardt R. Einsatz von Simulationswerkzeugen
in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten
im Fahrzeugleichtbau. In: DVM, ed. Ein wesentlicher Beitrag zur Klimadebatte.
Vol 675. DVM-Bericht. ; 2008.'
apa: Tröster, T., Rostek, W., Böke, J., & Erhardt, R. (2008). Einsatz von Simulationswerkzeugen
in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten
im Fahrzeugleichtbau. In DVM (Ed.), Ein wesentlicher Beitrag zur Klimadebatte
(Vol. 675).
bibtex: '@inproceedings{Tröster_Rostek_Böke_Erhardt_2008, series={DVM-Bericht},
title={Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten
warmgeformten Strukturkomponenten im Fahrzeugleichtbau}, volume={675}, booktitle={Ein
wesentlicher Beitrag zur Klimadebatte}, author={Tröster, Thomas and Rostek, W.
and Böke, J. and Erhardt, R.}, editor={DVM}, year={2008}, collection={DVM-Bericht}
}'
chicago: Tröster, Thomas, W. Rostek, J. Böke, and R. Erhardt. “Einsatz von Simulationswerkzeugen
in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten
im Fahrzeugleichtbau.” In Ein wesentlicher Beitrag zur Klimadebatte, edited
by DVM, Vol. 675. DVM-Bericht, 2008.
ieee: T. Tröster, W. Rostek, J. Böke, and R. Erhardt, “Einsatz von Simulationswerkzeugen
in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten
im Fahrzeugleichtbau,” in Ein wesentlicher Beitrag zur Klimadebatte, Berlin,
2008, vol. 675.
mla: Tröster, Thomas, et al. “Einsatz von Simulationswerkzeugen in der Entwicklungskette
von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau.” Ein
wesentlicher Beitrag zur Klimadebatte, edited by DVM, vol. 675, 2008.
short: 'T. Tröster, W. Rostek, J. Böke, R. Erhardt, in: DVM (Ed.), Ein wesentlicher
Beitrag zur Klimadebatte, 2008.'
conference:
end_date: 2008-04-25
location: Berlin
name: DVM-Tag 2008 Leichtbaustrategien,
start_date: 2008-04-23
corporate_editor:
- DVM
date_created: 2022-10-26T07:05:04Z
date_updated: 2022-10-26T07:05:19Z
department:
- _id: '9'
- _id: '149'
- _id: '321'
intvolume: ' 675'
language:
- iso: ger
publication: Ein wesentlicher Beitrag zur Klimadebatte
publication_status: published
series_title: DVM-Bericht
status: public
title: Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten
warmgeformten Strukturkomponenten im Fahrzeugleichtbau
type: conference
user_id: '15952'
volume: 675
year: '2008'
...
---
_id: '35275'
author:
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: P
full_name: Horák, P
last_name: Horák
citation:
ama: 'Magyar B, Horák P. Geometrical modeling and investigation of the contact relations
of spatial gears. In: ; 2008:G-2008-A-12.'
apa: Magyar, B., & Horák, P. (2008). Geometrical modeling and investigation
of the contact relations of spatial gears. G-2008-A-12.
bibtex: '@inproceedings{Magyar_Horák_2008, title={Geometrical modeling and investigation
of the contact relations of spatial gears}, author={Magyar, Balázs and Horák,
P}, year={2008}, pages={G-2008-A-12} }'
chicago: Magyar, Balázs, and P Horák. “Geometrical Modeling and Investigation of
the Contact Relations of Spatial Gears,” G-2008-A-12, 2008.
ieee: B. Magyar and P. Horák, “Geometrical modeling and investigation of the contact
relations of spatial gears,” 2008, p. G-2008-A-12.
mla: Magyar, Balázs, and P. Horák. Geometrical Modeling and Investigation of
the Contact Relations of Spatial Gears. 2008, p. G-2008-A-12.
short: 'B. Magyar, P. Horák, in: 2008, p. G-2008-A-12.'
conference:
name: GÉPÉSZET 2008
date_created: 2023-01-05T11:54:06Z
date_updated: 2023-01-05T11:54:19Z
department:
- _id: '146'
extern: '1'
language:
- iso: eng
page: G-2008-A-12
publication_identifier:
isbn:
- 978-963-420-947-8
status: public
title: Geometrical modeling and investigation of the contact relations of spatial
gears
type: conference
user_id: '38077'
year: '2008'
...
---
_id: '35283'
alternative_title:
- Térbeli hajtások geometriai modellezése és az érintkezési viszonyainak vizsgálata
author:
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: P
full_name: Horák, P
last_name: Horák
citation:
ama: Magyar B, Horák P. Geometrische Modellierung und Untersuchung der Berührungsverhältnisse
bei den Räumlichenverzahnungen. GÉP. 2008;LIX(4):28-30.
apa: Magyar B., & Horák P. (2008). Geometrische Modellierung und Untersuchung
der Berührungsverhältnisse bei den Räumlichenverzahnungen. GÉP, LIX(4),
28–30.
bibtex: '@article{Magyar_Horák_2008, title={Geometrische Modellierung und Untersuchung
der Berührungsverhältnisse bei den Räumlichenverzahnungen}, volume={LIX}, number={4},
journal={GÉP}, author={Magyar Balázs and Horák P}, year={2008}, pages={28–30}
}'
chicago: 'Magyar Balázs, and Horák P. “Geometrische Modellierung und Untersuchung
der Berührungsverhältnisse bei den Räumlichenverzahnungen.” GÉP LIX, no.
4 (2008): 28–30.'
ieee: Magyar B. and Horák P., “Geometrische Modellierung und Untersuchung der Berührungsverhältnisse
bei den Räumlichenverzahnungen,” GÉP, vol. LIX, no. 4, pp. 28–30, 2008.
mla: Magyar Balázs, and Horák P. “Geometrische Modellierung und Untersuchung der
Berührungsverhältnisse bei den Räumlichenverzahnungen.” GÉP, vol. LIX,
no. 4, 2008, pp. 28–30.
short: Magyar B., Horák P., GÉP LIX (2008) 28–30.
date_created: 2023-01-05T12:13:11Z
date_updated: 2023-01-05T12:13:55Z
department:
- _id: '146'
extern: '1'
issue: '4'
language:
- iso: hun
page: 28-30
publication: GÉP
status: public
title: Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den
Räumlichenverzahnungen
type: journal_article
user_id: '38077'
volume: LIX
year: '2008'
...
---
_id: '35282'
alternative_title:
- Körívprofilú csigahajtópárok érintkezési viszonyainak modellezése
author:
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: P
full_name: Horák, P
last_name: Horák
citation:
ama: Magyar B, Horák P. Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen.
GÉP. 2008;LIX(10-11):44-47.
apa: Magyar B., & Horák P. (2008). Modellierung der Berührungsverhältnisse von
Hohflanken-Schneckenradsätzen. GÉP, LIX(10–11), 44–47.
bibtex: '@article{Magyar_Horák_2008, title={Modellierung der Berührungsverhältnisse
von Hohflanken-Schneckenradsätzen}, volume={LIX}, number={10–11}, journal={GÉP},
author={Magyar Balázs and Horák P}, year={2008}, pages={44–47} }'
chicago: 'Magyar Balázs, and Horák P. “Modellierung der Berührungsverhältnisse von
Hohflanken-Schneckenradsätzen.” GÉP LIX, no. 10–11 (2008): 44–47.'
ieee: Magyar B. and Horák P., “Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen,”
GÉP, vol. LIX, no. 10–11, pp. 44–47, 2008.
mla: Magyar Balázs, and Horák P. “Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen.”
GÉP, vol. LIX, no. 10–11, 2008, pp. 44–47.
short: Magyar B., Horák P., GÉP LIX (2008) 44–47.
date_created: 2023-01-05T12:10:42Z
date_updated: 2023-01-05T12:13:31Z
department:
- _id: '146'
extern: '1'
issue: 10-11
language:
- iso: hun
page: 44-47
publication: GÉP
publication_identifier:
issn:
- 0016-8572
status: public
title: Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen
type: journal_article
user_id: '38077'
volume: LIX
year: '2008'
...
---
_id: '26267'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Mahnken R. Finite Deformation Elasto-Plasticity for Simulation of Strength
Difference in Adhesive Materials with an Algorithm in Principal Directions. Mechanics
of Advanced Materials and Structures. Published online 2008:514-527. doi:10.1080/15376490802142718
apa: Mahnken, R. (2008). Finite Deformation Elasto-Plasticity for Simulation of
Strength Difference in Adhesive Materials with an Algorithm in Principal Directions.
Mechanics of Advanced Materials and Structures, 514–527. https://doi.org/10.1080/15376490802142718
bibtex: '@article{Mahnken_2008, title={Finite Deformation Elasto-Plasticity for
Simulation of Strength Difference in Adhesive Materials with an Algorithm in Principal
Directions}, DOI={10.1080/15376490802142718},
journal={Mechanics of Advanced Materials and Structures}, author={Mahnken, Rolf},
year={2008}, pages={514–527} }'
chicago: Mahnken, Rolf. “Finite Deformation Elasto-Plasticity for Simulation of
Strength Difference in Adhesive Materials with an Algorithm in Principal Directions.”
Mechanics of Advanced Materials and Structures, 2008, 514–27. https://doi.org/10.1080/15376490802142718.
ieee: 'R. Mahnken, “Finite Deformation Elasto-Plasticity for Simulation of Strength
Difference in Adhesive Materials with an Algorithm in Principal Directions,” Mechanics
of Advanced Materials and Structures, pp. 514–527, 2008, doi: 10.1080/15376490802142718.'
mla: Mahnken, Rolf. “Finite Deformation Elasto-Plasticity for Simulation of Strength
Difference in Adhesive Materials with an Algorithm in Principal Directions.” Mechanics
of Advanced Materials and Structures, 2008, pp. 514–27, doi:10.1080/15376490802142718.
short: R. Mahnken, Mechanics of Advanced Materials and Structures (2008) 514–527.
date_created: 2021-10-15T11:24:18Z
date_updated: 2023-01-25T14:29:45Z
department:
- _id: '9'
- _id: '154'
doi: 10.1080/15376490802142718
language:
- iso: eng
page: 514-527
publication: Mechanics of Advanced Materials and Structures
publication_identifier:
issn:
- 1537-6494
- 1537-6532
publication_status: published
quality_controlled: '1'
status: public
title: Finite Deformation Elasto-Plasticity for Simulation of Strength Difference
in Adhesive Materials with an Algorithm in Principal Directions
type: journal_article
user_id: '335'
year: '2008'
...
---
_id: '26258'
author:
- first_name: Kim-Henning
full_name: Sauerland, Kim-Henning
last_name: Sauerland
- first_name: Franz-Barthold
full_name: Gockel, Franz-Barthold
last_name: Gockel
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Ferdinand
full_name: Ferber, Ferdinand
last_name: Ferber
citation:
ama: Sauerland K-H, Gockel F-B, Mahnken R, Ferber F. Damage analysis under thermal
shock loading using eddy current sensors. Nondestructive Testing and Evaluation.
Published online 2008:3-18. doi:10.1080/10589750802195451
apa: Sauerland, K.-H., Gockel, F.-B., Mahnken, R., & Ferber, F. (2008). Damage
analysis under thermal shock loading using eddy current sensors. Nondestructive
Testing and Evaluation, 3–18. https://doi.org/10.1080/10589750802195451
bibtex: '@article{Sauerland_Gockel_Mahnken_Ferber_2008, title={Damage analysis under
thermal shock loading using eddy current sensors}, DOI={10.1080/10589750802195451},
journal={Nondestructive Testing and Evaluation}, author={Sauerland, Kim-Henning
and Gockel, Franz-Barthold and Mahnken, Rolf and Ferber, Ferdinand}, year={2008},
pages={3–18} }'
chicago: Sauerland, Kim-Henning, Franz-Barthold Gockel, Rolf Mahnken, and Ferdinand
Ferber. “Damage Analysis under Thermal Shock Loading Using Eddy Current Sensors.”
Nondestructive Testing and Evaluation, 2008, 3–18. https://doi.org/10.1080/10589750802195451.
ieee: 'K.-H. Sauerland, F.-B. Gockel, R. Mahnken, and F. Ferber, “Damage analysis
under thermal shock loading using eddy current sensors,” Nondestructive Testing
and Evaluation, pp. 3–18, 2008, doi: 10.1080/10589750802195451.'
mla: Sauerland, Kim-Henning, et al. “Damage Analysis under Thermal Shock Loading
Using Eddy Current Sensors.” Nondestructive Testing and Evaluation, 2008,
pp. 3–18, doi:10.1080/10589750802195451.
short: K.-H. Sauerland, F.-B. Gockel, R. Mahnken, F. Ferber, Nondestructive Testing
and Evaluation (2008) 3–18.
date_created: 2021-10-15T10:32:01Z
date_updated: 2023-01-25T14:29:30Z
department:
- _id: '9'
- _id: '154'
doi: 10.1080/10589750802195451
language:
- iso: eng
page: 3-18
publication: Nondestructive Testing and Evaluation
publication_identifier:
issn:
- 1058-9759
- 1477-2671
publication_status: published
quality_controlled: '1'
status: public
title: Damage analysis under thermal shock loading using eddy current sensors
type: journal_article
user_id: '335'
year: '2008'
...
---
_id: '26274'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: A.
full_name: Shaban, A.
last_name: Shaban
- first_name: H.
full_name: Potente, H.
last_name: Potente
- first_name: L.
full_name: Wilke, L.
last_name: Wilke
citation:
ama: Mahnken R, Shaban A, Potente H, Wilke L. Thermoviscoplastic modelling of asymmetric
effects for polymers at large strains. International Journal of Solids and
Structures. Published online 2008:4615-4628. doi:10.1016/j.ijsolstr.2008.03.033
apa: Mahnken, R., Shaban, A., Potente, H., & Wilke, L. (2008). Thermoviscoplastic
modelling of asymmetric effects for polymers at large strains. International
Journal of Solids and Structures, 4615–4628. https://doi.org/10.1016/j.ijsolstr.2008.03.033
bibtex: '@article{Mahnken_Shaban_Potente_Wilke_2008, title={Thermoviscoplastic modelling
of asymmetric effects for polymers at large strains}, DOI={10.1016/j.ijsolstr.2008.03.033},
journal={International Journal of Solids and Structures}, author={Mahnken, Rolf
and Shaban, A. and Potente, H. and Wilke, L.}, year={2008}, pages={4615–4628}
}'
chicago: Mahnken, Rolf, A. Shaban, H. Potente, and L. Wilke. “Thermoviscoplastic
Modelling of Asymmetric Effects for Polymers at Large Strains.” International
Journal of Solids and Structures, 2008, 4615–28. https://doi.org/10.1016/j.ijsolstr.2008.03.033.
ieee: 'R. Mahnken, A. Shaban, H. Potente, and L. Wilke, “Thermoviscoplastic modelling
of asymmetric effects for polymers at large strains,” International Journal
of Solids and Structures, pp. 4615–4628, 2008, doi: 10.1016/j.ijsolstr.2008.03.033.'
mla: Mahnken, Rolf, et al. “Thermoviscoplastic Modelling of Asymmetric Effects for
Polymers at Large Strains.” International Journal of Solids and Structures,
2008, pp. 4615–28, doi:10.1016/j.ijsolstr.2008.03.033.
short: R. Mahnken, A. Shaban, H. Potente, L. Wilke, International Journal of Solids
and Structures (2008) 4615–4628.
date_created: 2021-10-15T11:28:15Z
date_updated: 2023-01-25T14:30:03Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/j.ijsolstr.2008.03.033
language:
- iso: eng
page: 4615-4628
publication: International Journal of Solids and Structures
publication_identifier:
issn:
- 0020-7683
publication_status: published
quality_controlled: '1'
status: public
title: Thermoviscoplastic modelling of asymmetric effects for polymers at large strains
type: journal_article
user_id: '335'
year: '2008'
...
---
_id: '26261'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Andreas
full_name: Schneidt, Andreas
last_name: Schneidt
- first_name: Thomas
full_name: Antretter, Thomas
last_name: Antretter
citation:
ama: Mahnken R, Schneidt A, Antretter T. Macro modelling and homogenization for
transformation induced plasticity of a low-alloy steel. International Journal
of Plasticity. Published online 2008:183-204. doi:10.1016/j.ijplas.2008.03.005
apa: Mahnken, R., Schneidt, A., & Antretter, T. (2008). Macro modelling and
homogenization for transformation induced plasticity of a low-alloy steel. International
Journal of Plasticity, 183–204. https://doi.org/10.1016/j.ijplas.2008.03.005
bibtex: '@article{Mahnken_Schneidt_Antretter_2008, title={Macro modelling and homogenization
for transformation induced plasticity of a low-alloy steel}, DOI={10.1016/j.ijplas.2008.03.005},
journal={International Journal of Plasticity}, author={Mahnken, Rolf and Schneidt,
Andreas and Antretter, Thomas}, year={2008}, pages={183–204} }'
chicago: Mahnken, Rolf, Andreas Schneidt, and Thomas Antretter. “Macro Modelling
and Homogenization for Transformation Induced Plasticity of a Low-Alloy Steel.”
International Journal of Plasticity, 2008, 183–204. https://doi.org/10.1016/j.ijplas.2008.03.005.
ieee: 'R. Mahnken, A. Schneidt, and T. Antretter, “Macro modelling and homogenization
for transformation induced plasticity of a low-alloy steel,” International
Journal of Plasticity, pp. 183–204, 2008, doi: 10.1016/j.ijplas.2008.03.005.'
mla: Mahnken, Rolf, et al. “Macro Modelling and Homogenization for Transformation
Induced Plasticity of a Low-Alloy Steel.” International Journal of Plasticity,
2008, pp. 183–204, doi:10.1016/j.ijplas.2008.03.005.
short: R. Mahnken, A. Schneidt, T. Antretter, International Journal of Plasticity
(2008) 183–204.
date_created: 2021-10-15T10:33:40Z
date_updated: 2023-01-25T14:29:37Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/j.ijplas.2008.03.005
language:
- iso: eng
page: 183-204
publication: International Journal of Plasticity
publication_identifier:
issn:
- 0749-6419
publication_status: published
quality_controlled: '1'
status: public
title: Macro modelling and homogenization for transformation induced plasticity of
a low-alloy steel
type: journal_article
user_id: '335'
year: '2008'
...
---
_id: '23267'
author:
- first_name: Isabel
full_name: Koke, Isabel
id: '273'
last_name: Koke
- first_name: Wolfgang H.
full_name: Müller, Wolfgang H.
last_name: Müller
- first_name: Ferdinand
full_name: Ferber, Ferdinand
last_name: Ferber
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Herbert
full_name: Funke, Herbert
last_name: Funke
citation:
ama: 'Koke I, Müller WH, Ferber F, Mahnken R, Funke H. Measuring mechanical parameters
in glass fiber-reinforced composites: Standard evaluation techniques enhanced
by photogrammetry. Composites Science and Technology. 2008;68(Issue 5):1156-1164.'
apa: 'Koke, I., Müller, W. H., Ferber, F., Mahnken, R., & Funke, H. (2008).
Measuring mechanical parameters in glass fiber-reinforced composites: Standard
evaluation techniques enhanced by photogrammetry. Composites Science and Technology,
68(Issue 5), 1156–1164.'
bibtex: '@article{Koke_Müller_Ferber_Mahnken_Funke_2008, title={Measuring mechanical
parameters in glass fiber-reinforced composites: Standard evaluation techniques
enhanced by photogrammetry}, volume={68}, number={Issue 5}, journal={Composites
Science and Technology}, author={Koke, Isabel and Müller, Wolfgang H. and Ferber,
Ferdinand and Mahnken, Rolf and Funke, Herbert}, year={2008}, pages={1156–1164}
}'
chicago: 'Koke, Isabel, Wolfgang H. Müller, Ferdinand Ferber, Rolf Mahnken, and
Herbert Funke. “Measuring Mechanical Parameters in Glass Fiber-Reinforced Composites:
Standard Evaluation Techniques Enhanced by Photogrammetry.” Composites Science
and Technology 68, no. Issue 5 (2008): 1156–64.'
ieee: 'I. Koke, W. H. Müller, F. Ferber, R. Mahnken, and H. Funke, “Measuring mechanical
parameters in glass fiber-reinforced composites: Standard evaluation techniques
enhanced by photogrammetry,” Composites Science and Technology, vol. 68,
no. Issue 5, pp. 1156–1164, 2008.'
mla: 'Koke, Isabel, et al. “Measuring Mechanical Parameters in Glass Fiber-Reinforced
Composites: Standard Evaluation Techniques Enhanced by Photogrammetry.” Composites
Science and Technology, vol. 68, no. Issue 5, 2008, pp. 1156–64.'
short: I. Koke, W.H. Müller, F. Ferber, R. Mahnken, H. Funke, Composites Science
and Technology 68 (2008) 1156–1164.
date_created: 2021-08-09T09:08:11Z
date_updated: 2023-01-25T14:30:19Z
department:
- _id: '9'
- _id: '153'
- _id: '154'
intvolume: ' 68'
issue: Issue 5
language:
- iso: eng
page: 1156-1164
publication: Composites Science and Technology
quality_controlled: '1'
status: public
title: 'Measuring mechanical parameters in glass fiber-reinforced composites: Standard
evaluation techniques enhanced by photogrammetry'
type: journal_article
user_id: '335'
volume: 68
year: '2008'
...