---
_id: '9526'
abstract:
- lang: eng
text: The present paper deals with the forced vibration analysis of a test structure.
The test structure consists of two parts, an upper and a lower half pipe, joint
in two bolted flanges which represent the extended friction contacts. Depending
on the clamping loads different normal pressure distributions can be established
in the contact interfaces. Since the test structure is loaded with a harmonic
external force relative displacements occur in the contact interface. This leads
to microslip effects affecting the dynamic behaviour. The experimental validation
of the calculation method accounting for these effects is shown by comparing measured
and calculated frequency response functions (FRF). ({\^A}{\copyright} 2005 WILEY-VCH
Verlag GmbH & Co. KGaA, Weinheim)
author:
- first_name: Alexander
full_name: Genzo, Alexander
last_name: Genzo
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Karl
full_name: Popp, Karl
last_name: Popp
citation:
ama: Genzo A, Sextro W, Popp K. Analysis of the Forced Vibration of Two Bolted Half-Pipes
with Extended Friction Contacts. PAMM. 2005;5(1):91-92. doi:10.1002/pamm.200510026
apa: Genzo, A., Sextro, W., & Popp, K. (2005). Analysis of the Forced Vibration
of Two Bolted Half-Pipes with Extended Friction Contacts. PAMM, 5(1),
91–92. https://doi.org/10.1002/pamm.200510026
bibtex: '@article{Genzo_Sextro_Popp_2005, title={Analysis of the Forced Vibration
of Two Bolted Half-Pipes with Extended Friction Contacts}, volume={5}, DOI={10.1002/pamm.200510026}, number={1},
journal={PAMM}, publisher={WILEY-VCH Verlag}, author={Genzo, Alexander and Sextro,
Walter and Popp, Karl}, year={2005}, pages={91–92} }'
chicago: 'Genzo, Alexander, Walter Sextro, and Karl Popp. “Analysis of the Forced
Vibration of Two Bolted Half-Pipes with Extended Friction Contacts.” PAMM
5, no. 1 (2005): 91–92. https://doi.org/10.1002/pamm.200510026.'
ieee: A. Genzo, W. Sextro, and K. Popp, “Analysis of the Forced Vibration of Two
Bolted Half-Pipes with Extended Friction Contacts,” PAMM, vol. 5, no. 1,
pp. 91–92, 2005.
mla: Genzo, Alexander, et al. “Analysis of the Forced Vibration of Two Bolted Half-Pipes
with Extended Friction Contacts.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag,
2005, pp. 91–92, doi:10.1002/pamm.200510026.
short: A. Genzo, W. Sextro, K. Popp, PAMM 5 (2005) 91–92.
date_created: 2019-04-29T08:32:42Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1002/pamm.200510026
intvolume: ' 5'
issue: '1'
language:
- iso: eng
page: 91-92
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publisher: WILEY-VCH Verlag
status: public
title: Analysis of the Forced Vibration of Two Bolted Half-Pipes with Extended Friction
Contacts
type: journal_article
user_id: '55222'
volume: 5
year: '2005'
...
---
_id: '9527'
author:
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: 'Hemsel T. Modellgestützte Analyse piezoelektrischer Transformatoren. In: Mechatronik
2005 Innovative Produktentwicklung. Vol 1892. VDI-Berichte. Düsseldorf; 2005:1013-1032.'
apa: Hemsel, T. (2005). Modellgestützte Analyse piezoelektrischer Transformatoren.
In Mechatronik 2005 Innovative Produktentwicklung (Vol. 1892, pp. 1013–1032).
Düsseldorf.
bibtex: '@inproceedings{Hemsel_2005, place={Düsseldorf}, series={VDI-Berichte},
title={Modellgestützte Analyse piezoelektrischer Transformatoren}, volume={1892},
number={Band 2}, booktitle={Mechatronik 2005 Innovative Produktentwicklung}, author={Hemsel,
Tobias}, year={2005}, pages={1013–1032}, collection={VDI-Berichte} }'
chicago: Hemsel, Tobias. “Modellgestützte Analyse Piezoelektrischer Transformatoren.”
In Mechatronik 2005 Innovative Produktentwicklung, 1892:1013–32. VDI-Berichte.
Düsseldorf, 2005.
ieee: T. Hemsel, “Modellgestützte Analyse piezoelektrischer Transformatoren,” in
Mechatronik 2005 Innovative Produktentwicklung, 2005, vol. 1892, no. Band
2, pp. 1013–1032.
mla: Hemsel, Tobias. “Modellgestützte Analyse Piezoelektrischer Transformatoren.”
Mechatronik 2005 Innovative Produktentwicklung, vol. 1892, no. Band 2,
2005, pp. 1013–32.
short: 'T. Hemsel, in: Mechatronik 2005 Innovative Produktentwicklung, Düsseldorf,
2005, pp. 1013–1032.'
date_created: 2019-04-29T08:33:46Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
intvolume: ' 1892'
issue: Band 2
language:
- iso: eng
page: 1013-1032
place: Düsseldorf
publication: Mechatronik 2005 Innovative Produktentwicklung
series_title: VDI-Berichte
status: public
title: Modellgestützte Analyse piezoelektrischer Transformatoren
type: conference
user_id: '55222'
volume: 1892
year: '2005'
...
---
_id: '9528'
author:
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: Piotr
full_name: Vasiljev, Piotr
last_name: Vasiljev
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: 'Hemsel T, Mracek M, Twiefel J, Vasiljev P, Wallaschek J. Linear ultrasonic
motors based on coupling of longitudinal vibrations. In: Proceedings of the
First International Conference on Ultrasonic Motors and Actuators (IWOUMA).
Yokohama, Japan; 2005:32-36.'
apa: Hemsel, T., Mracek, M., Twiefel, J., Vasiljev, P., & Wallaschek, J. (2005).
Linear ultrasonic motors based on coupling of longitudinal vibrations. In Proceedings
of the First International Conference on Ultrasonic Motors and Actuators (IWOUMA)
(pp. 32–36). Yokohama, Japan.
bibtex: '@inproceedings{Hemsel_Mracek_Twiefel_Vasiljev_Wallaschek_2005, place={Yokohama,
Japan}, title={Linear ultrasonic motors based on coupling of longitudinal vibrations},
booktitle={Proceedings of the First International Conference on Ultrasonic Motors
and Actuators (IWOUMA)}, author={Hemsel, Tobias and Mracek, Maik and Twiefel,
Jens and Vasiljev, Piotr and Wallaschek, Jörg}, year={2005}, pages={32–36} }'
chicago: Hemsel, Tobias, Maik Mracek, Jens Twiefel, Piotr Vasiljev, and Jörg Wallaschek.
“Linear Ultrasonic Motors Based on Coupling of Longitudinal Vibrations.” In Proceedings
of the First International Conference on Ultrasonic Motors and Actuators (IWOUMA),
32–36. Yokohama, Japan, 2005.
ieee: T. Hemsel, M. Mracek, J. Twiefel, P. Vasiljev, and J. Wallaschek, “Linear
ultrasonic motors based on coupling of longitudinal vibrations,” in Proceedings
of the First International Conference on Ultrasonic Motors and Actuators (IWOUMA),
2005, pp. 32–36.
mla: Hemsel, Tobias, et al. “Linear Ultrasonic Motors Based on Coupling of Longitudinal
Vibrations.” Proceedings of the First International Conference on Ultrasonic
Motors and Actuators (IWOUMA), 2005, pp. 32–36.
short: 'T. Hemsel, M. Mracek, J. Twiefel, P. Vasiljev, J. Wallaschek, in: Proceedings
of the First International Conference on Ultrasonic Motors and Actuators (IWOUMA),
Yokohama, Japan, 2005, pp. 32–36.'
date_created: 2019-04-29T08:35:16Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
page: 32-36
place: Yokohama, Japan
publication: Proceedings of the First International Conference on Ultrasonic Motors
and Actuators (IWOUMA)
status: public
title: Linear ultrasonic motors based on coupling of longitudinal vibrations
type: conference
user_id: '55222'
year: '2005'
...
---
_id: '9529'
abstract:
- lang: eng
text: In dieser Arbeit wird ein analytisches Berechnungsverfahren vorgestellt, mit
dem der gesamte Positions- und Orientierungsraum (ErrorWorkspace) ebener Mechanismen
mit spielbehafteten Gelenken kinematisch beschrieben bzw. dargestellt werden kann.
Für die Berechnung wird der gesamte Positions- und Orientierungsraum im Kinematischen
Bildraum dargestellt, wobei auf besondere Merkmale eingegangen wird. Der ErrorWorkspace,
der mit Hilfe des Berechnungsverfahren bestimmt wird, wird an einem Koppelgetriebe,
an einem Filmgreifergetriebe und an einem Double-rocker four-bar mechanism mit
Kurbelantrieb dargestellt und analysiert. ({\copyright} 2005 WILEY-VCH Verlag
GmbH & Co. KGaA, Weinheim)
author:
- first_name: Adolf
full_name: Hofmeister, Adolf
last_name: Hofmeister
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
- first_name: Otto
full_name: Röschel, Otto
last_name: Röschel
citation:
ama: Hofmeister A, Sextro W, Röschel O. Unkontrollierbare Bewegungen ebener Mechanismen
mit Gelenkspiel. PAMM. 2005;5(1):201-202. doi:10.1002/pamm.200510078
apa: Hofmeister, A., Sextro, W., & Röschel, O. (2005). Unkontrollierbare Bewegungen
ebener Mechanismen mit Gelenkspiel. PAMM, 5(1), 201–202. https://doi.org/10.1002/pamm.200510078
bibtex: '@article{Hofmeister_Sextro_Röschel_2005, title={Unkontrollierbare Bewegungen
ebener Mechanismen mit Gelenkspiel}, volume={5}, DOI={10.1002/pamm.200510078},
number={1}, journal={PAMM}, publisher={WILEY-VCH Verlag}, author={Hofmeister,
Adolf and Sextro, Walter and Röschel, Otto}, year={2005}, pages={201–202} }'
chicago: 'Hofmeister, Adolf, Walter Sextro, and Otto Röschel. “Unkontrollierbare
Bewegungen Ebener Mechanismen Mit Gelenkspiel.” PAMM 5, no. 1 (2005): 201–2.
https://doi.org/10.1002/pamm.200510078.'
ieee: A. Hofmeister, W. Sextro, and O. Röschel, “Unkontrollierbare Bewegungen ebener
Mechanismen mit Gelenkspiel,” PAMM, vol. 5, no. 1, pp. 201–202, 2005.
mla: Hofmeister, Adolf, et al. “Unkontrollierbare Bewegungen Ebener Mechanismen
Mit Gelenkspiel.” PAMM, vol. 5, no. 1, WILEY-VCH Verlag, 2005, pp. 201–02,
doi:10.1002/pamm.200510078.
short: A. Hofmeister, W. Sextro, O. Röschel, PAMM 5 (2005) 201–202.
date_created: 2019-04-29T08:39:21Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
doi: 10.1002/pamm.200510078
intvolume: ' 5'
issue: '1'
language:
- iso: eng
page: 201-202
publication: PAMM
publication_identifier:
issn:
- 1617-7061
publisher: WILEY-VCH Verlag
status: public
title: Unkontrollierbare Bewegungen ebener Mechanismen mit Gelenkspiel
type: journal_article
user_id: '55222'
volume: 5
year: '2005'
...
---
_id: '9530'
author:
- first_name: Maik
full_name: Mracek, Maik
last_name: Mracek
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: 'Mracek M, Hemsel T, Wallaschek J. Parallel Operation of Ultrasonic Linear
Motors. In: Proceedings of the First International Conference on Ultrasonic
Motors and Actuators (IWOUMA). Yokohama, Japan; 2005:23-24.'
apa: Mracek, M., Hemsel, T., & Wallaschek, J. (2005). Parallel Operation of
Ultrasonic Linear Motors. In Proceedings of the First International Conference
on Ultrasonic Motors and Actuators (IWOUMA) (pp. 23–24). Yokohama, Japan.
bibtex: '@inproceedings{Mracek_Hemsel_Wallaschek_2005, place={Yokohama, Japan},
title={Parallel Operation of Ultrasonic Linear Motors}, booktitle={Proceedings
of the First International Conference on Ultrasonic Motors and Actuators (IWOUMA)},
author={Mracek, Maik and Hemsel, Tobias and Wallaschek, Jörg}, year={2005}, pages={23–24}
}'
chicago: Mracek, Maik, Tobias Hemsel, and Jörg Wallaschek. “Parallel Operation of
Ultrasonic Linear Motors.” In Proceedings of the First International Conference
on Ultrasonic Motors and Actuators (IWOUMA), 23–24. Yokohama, Japan, 2005.
ieee: M. Mracek, T. Hemsel, and J. Wallaschek, “Parallel Operation of Ultrasonic
Linear Motors,” in Proceedings of the First International Conference on Ultrasonic
Motors and Actuators (IWOUMA), 2005, pp. 23–24.
mla: Mracek, Maik, et al. “Parallel Operation of Ultrasonic Linear Motors.” Proceedings
of the First International Conference on Ultrasonic Motors and Actuators (IWOUMA),
2005, pp. 23–24.
short: 'M. Mracek, T. Hemsel, J. Wallaschek, in: Proceedings of the First International
Conference on Ultrasonic Motors and Actuators (IWOUMA), Yokohama, Japan, 2005,
pp. 23–24.'
date_created: 2019-04-29T08:41:33Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
page: 23-24
place: Yokohama, Japan
publication: Proceedings of the First International Conference on Ultrasonic Motors
and Actuators (IWOUMA)
status: public
title: Parallel Operation of Ultrasonic Linear Motors
type: conference
user_id: '55222'
year: '2005'
...
---
_id: '9531'
author:
- first_name: Jens
full_name: Twiefel, Jens
last_name: Twiefel
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Christopher
full_name: Kauczor, Christopher
last_name: Kauczor
- first_name: Jörg
full_name: Wallaschek, Jörg
last_name: Wallaschek
citation:
ama: 'Twiefel J, Hemsel T, Kauczor C, Wallaschek J. Teaching Mechatronics to a Mixed
Audience from Industry and University. In: 6th International Workshop on Research
and Education in Mechatronics. ; 2005:356-361.'
apa: Twiefel, J., Hemsel, T., Kauczor, C., & Wallaschek, J. (2005). Teaching
Mechatronics to a Mixed Audience from Industry and University. In 6th International
Workshop on Research and Education in Mechatronics (pp. 356–361).
bibtex: '@inproceedings{Twiefel_Hemsel_Kauczor_Wallaschek_2005, title={Teaching
Mechatronics to a Mixed Audience from Industry and University}, booktitle={6th
International Workshop on Research and Education in Mechatronics}, author={Twiefel,
Jens and Hemsel, Tobias and Kauczor, Christopher and Wallaschek, Jörg}, year={2005},
pages={356–361} }'
chicago: Twiefel, Jens, Tobias Hemsel, Christopher Kauczor, and Jörg Wallaschek.
“Teaching Mechatronics to a Mixed Audience from Industry and University.” In 6th
International Workshop on Research and Education in Mechatronics, 356–61,
2005.
ieee: J. Twiefel, T. Hemsel, C. Kauczor, and J. Wallaschek, “Teaching Mechatronics
to a Mixed Audience from Industry and University,” in 6th International Workshop
on Research and Education in Mechatronics, 2005, pp. 356–361.
mla: Twiefel, Jens, et al. “Teaching Mechatronics to a Mixed Audience from Industry
and University.” 6th International Workshop on Research and Education in Mechatronics,
2005, pp. 356–61.
short: 'J. Twiefel, T. Hemsel, C. Kauczor, J. Wallaschek, in: 6th International
Workshop on Research and Education in Mechatronics, 2005, pp. 356–361.'
date_created: 2019-04-29T08:44:04Z
date_updated: 2022-01-06T07:04:16Z
department:
- _id: '151'
language:
- iso: eng
page: 356-361
popular_science: '1'
publication: 6th International Workshop on Research and Education in Mechatronics
status: public
title: Teaching Mechatronics to a Mixed Audience from Industry and University
type: conference
user_id: '55222'
year: '2005'
...
---
_id: '28777'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Mahnken R. Anisotropy in geometrically non-linear elasticity with generalized
Seth-Hill strain tensors projected to invariant subspaces. Communications in
Numerical Methods in Engineering. Published online 2005:405-418. doi:10.1002/cnm.752
apa: Mahnken, R. (2005). Anisotropy in geometrically non-linear elasticity with
generalized Seth-Hill strain tensors projected to invariant subspaces. Communications
in Numerical Methods in Engineering, 405–418. https://doi.org/10.1002/cnm.752
bibtex: '@article{Mahnken_2005, title={Anisotropy in geometrically non-linear elasticity
with generalized Seth-Hill strain tensors projected to invariant subspaces}, DOI={10.1002/cnm.752}, journal={Communications
in Numerical Methods in Engineering}, author={Mahnken, Rolf}, year={2005}, pages={405–418}
}'
chicago: Mahnken, Rolf. “Anisotropy in Geometrically Non-Linear Elasticity with
Generalized Seth-Hill Strain Tensors Projected to Invariant Subspaces.” Communications
in Numerical Methods in Engineering, 2005, 405–18. https://doi.org/10.1002/cnm.752.
ieee: 'R. Mahnken, “Anisotropy in geometrically non-linear elasticity with generalized
Seth-Hill strain tensors projected to invariant subspaces,” Communications
in Numerical Methods in Engineering, pp. 405–418, 2005, doi: 10.1002/cnm.752.'
mla: Mahnken, Rolf. “Anisotropy in Geometrically Non-Linear Elasticity with Generalized
Seth-Hill Strain Tensors Projected to Invariant Subspaces.” Communications
in Numerical Methods in Engineering, 2005, pp. 405–18, doi:10.1002/cnm.752.
short: R. Mahnken, Communications in Numerical Methods in Engineering (2005) 405–418.
date_created: 2021-12-14T11:05:12Z
date_updated: 2023-01-25T14:33:23Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/cnm.752
language:
- iso: eng
page: 405-418
publication: Communications in Numerical Methods in Engineering
publication_identifier:
issn:
- 1069-8299
publication_status: published
quality_controlled: '1'
status: public
title: Anisotropy in geometrically non-linear elasticity with generalized Seth-Hill
strain tensors projected to invariant subspaces
type: journal_article
user_id: '335'
year: '2005'
...
---
_id: '28779'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Michael
full_name: Schlimmer, Michael
last_name: Schlimmer
citation:
ama: Mahnken R, Schlimmer M. Simulation of strength difference in elasto-plasticity
for adhesive materials. International Journal for Numerical Methods in Engineering.
Published online 2005:1461-1477. doi:10.1002/nme.1315
apa: Mahnken, R., & Schlimmer, M. (2005). Simulation of strength difference
in elasto-plasticity for adhesive materials. International Journal for Numerical
Methods in Engineering, 1461–1477. https://doi.org/10.1002/nme.1315
bibtex: '@article{Mahnken_Schlimmer_2005, title={Simulation of strength difference
in elasto-plasticity for adhesive materials}, DOI={10.1002/nme.1315},
journal={International Journal for Numerical Methods in Engineering}, author={Mahnken,
Rolf and Schlimmer, Michael}, year={2005}, pages={1461–1477} }'
chicago: Mahnken, Rolf, and Michael Schlimmer. “Simulation of Strength Difference
in Elasto-Plasticity for Adhesive Materials.” International Journal for Numerical
Methods in Engineering, 2005, 1461–77. https://doi.org/10.1002/nme.1315.
ieee: 'R. Mahnken and M. Schlimmer, “Simulation of strength difference in elasto-plasticity
for adhesive materials,” International Journal for Numerical Methods in Engineering,
pp. 1461–1477, 2005, doi: 10.1002/nme.1315.'
mla: Mahnken, Rolf, and Michael Schlimmer. “Simulation of Strength Difference in
Elasto-Plasticity for Adhesive Materials.” International Journal for Numerical
Methods in Engineering, 2005, pp. 1461–77, doi:10.1002/nme.1315.
short: R. Mahnken, M. Schlimmer, International Journal for Numerical Methods in
Engineering (2005) 1461–1477.
date_created: 2021-12-14T11:05:53Z
date_updated: 2023-01-25T14:33:29Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/nme.1315
language:
- iso: eng
page: 1461-1477
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
issn:
- 0029-5981
- 1097-0207
publication_status: published
quality_controlled: '1'
status: public
title: Simulation of strength difference in elasto-plasticity for adhesive materials
type: journal_article
user_id: '335'
year: '2005'
...
---
_id: '28775'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Mahnken R. Simulation of strength difference for adhesive materials in finite
deformation elasto-plasticity. Computer Methods in Applied Mechanics and Engineering.
Published online 2005:4097-4114. doi:10.1016/j.cma.2004.10.006
apa: Mahnken, R. (2005). Simulation of strength difference for adhesive materials
in finite deformation elasto-plasticity. Computer Methods in Applied Mechanics
and Engineering, 4097–4114. https://doi.org/10.1016/j.cma.2004.10.006
bibtex: '@article{Mahnken_2005, title={Simulation of strength difference for adhesive
materials in finite deformation elasto-plasticity}, DOI={10.1016/j.cma.2004.10.006},
journal={Computer Methods in Applied Mechanics and Engineering}, author={Mahnken,
Rolf}, year={2005}, pages={4097–4114} }'
chicago: Mahnken, Rolf. “Simulation of Strength Difference for Adhesive Materials
in Finite Deformation Elasto-Plasticity.” Computer Methods in Applied Mechanics
and Engineering, 2005, 4097–4114. https://doi.org/10.1016/j.cma.2004.10.006.
ieee: 'R. Mahnken, “Simulation of strength difference for adhesive materials in
finite deformation elasto-plasticity,” Computer Methods in Applied Mechanics
and Engineering, pp. 4097–4114, 2005, doi: 10.1016/j.cma.2004.10.006.'
mla: Mahnken, Rolf. “Simulation of Strength Difference for Adhesive Materials in
Finite Deformation Elasto-Plasticity.” Computer Methods in Applied Mechanics
and Engineering, 2005, pp. 4097–114, doi:10.1016/j.cma.2004.10.006.
short: R. Mahnken, Computer Methods in Applied Mechanics and Engineering (2005)
4097–4114.
date_created: 2021-12-14T11:04:28Z
date_updated: 2023-01-25T14:33:11Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/j.cma.2004.10.006
language:
- iso: eng
page: 4097-4114
publication: Computer Methods in Applied Mechanics and Engineering
publication_identifier:
issn:
- 0045-7825
publication_status: published
quality_controlled: '1'
status: public
title: Simulation of strength difference for adhesive materials in finite deformation
elasto-plasticity
type: journal_article
user_id: '335'
year: '2005'
...
---
_id: '28776'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Mahnken R. Creep simulation of asymmetric effects at large strains by stress
mode decomposition. Computer Methods in Applied Mechanics and Engineering.
Published online 2005:4221-4243. doi:10.1016/j.cma.2004.11.003
apa: Mahnken, R. (2005). Creep simulation of asymmetric effects at large strains
by stress mode decomposition. Computer Methods in Applied Mechanics and Engineering,
4221–4243. https://doi.org/10.1016/j.cma.2004.11.003
bibtex: '@article{Mahnken_2005, title={Creep simulation of asymmetric effects at
large strains by stress mode decomposition}, DOI={10.1016/j.cma.2004.11.003},
journal={Computer Methods in Applied Mechanics and Engineering}, author={Mahnken,
Rolf}, year={2005}, pages={4221–4243} }'
chicago: Mahnken, Rolf. “Creep Simulation of Asymmetric Effects at Large Strains
by Stress Mode Decomposition.” Computer Methods in Applied Mechanics and Engineering,
2005, 4221–43. https://doi.org/10.1016/j.cma.2004.11.003.
ieee: 'R. Mahnken, “Creep simulation of asymmetric effects at large strains by stress
mode decomposition,” Computer Methods in Applied Mechanics and Engineering,
pp. 4221–4243, 2005, doi: 10.1016/j.cma.2004.11.003.'
mla: Mahnken, Rolf. “Creep Simulation of Asymmetric Effects at Large Strains by
Stress Mode Decomposition.” Computer Methods in Applied Mechanics and Engineering,
2005, pp. 4221–43, doi:10.1016/j.cma.2004.11.003.
short: R. Mahnken, Computer Methods in Applied Mechanics and Engineering (2005)
4221–4243.
date_created: 2021-12-14T11:04:52Z
date_updated: 2023-01-25T14:33:17Z
department:
- _id: '9'
- _id: '154'
doi: 10.1016/j.cma.2004.11.003
language:
- iso: eng
page: 4221-4243
publication: Computer Methods in Applied Mechanics and Engineering
publication_identifier:
issn:
- 0045-7825
publication_status: published
quality_controlled: '1'
status: public
title: Creep simulation of asymmetric effects at large strains by stress mode decomposition
type: journal_article
user_id: '335'
year: '2005'
...
---
_id: '28774'
author:
- first_name: Franz-Barthold
full_name: Gockel, Franz-Barthold
last_name: Gockel
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Gockel F-B, Mahnken R. Experimental and Numerical Investigations for Cyclic
Thermal Shocks. PAMM. Published online 2005:501-502. doi:10.1002/pamm.200510227
apa: Gockel, F.-B., & Mahnken, R. (2005). Experimental and Numerical Investigations
for Cyclic Thermal Shocks. PAMM, 501–502. https://doi.org/10.1002/pamm.200510227
bibtex: '@article{Gockel_Mahnken_2005, title={Experimental and Numerical Investigations
for Cyclic Thermal Shocks}, DOI={10.1002/pamm.200510227},
journal={PAMM}, author={Gockel, Franz-Barthold and Mahnken, Rolf}, year={2005},
pages={501–502} }'
chicago: Gockel, Franz-Barthold, and Rolf Mahnken. “Experimental and Numerical Investigations
for Cyclic Thermal Shocks.” PAMM, 2005, 501–2. https://doi.org/10.1002/pamm.200510227.
ieee: 'F.-B. Gockel and R. Mahnken, “Experimental and Numerical Investigations for
Cyclic Thermal Shocks,” PAMM, pp. 501–502, 2005, doi: 10.1002/pamm.200510227.'
mla: Gockel, Franz-Barthold, and Rolf Mahnken. “Experimental and Numerical Investigations
for Cyclic Thermal Shocks.” PAMM, 2005, pp. 501–02, doi:10.1002/pamm.200510227.
short: F.-B. Gockel, R. Mahnken, PAMM (2005) 501–502.
date_created: 2021-12-14T11:04:02Z
date_updated: 2023-01-25T14:33:07Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/pamm.200510227
language:
- iso: ger
page: 501-502
publication: PAMM
publication_identifier:
issn:
- 1617-7061
- 1617-7061
publication_status: published
status: public
title: Experimental and Numerical Investigations for Cyclic Thermal Shocks
type: journal_article
user_id: '335'
year: '2005'
...
---
_id: '28781'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Mahnken R. Identification of Material Parameters for Constitutive Equations.
Encyclopedia of Computational Mechanics. Published online 2005. doi:10.1002/0470091355.ecm043
apa: Mahnken, R. (2005). Identification of Material Parameters for Constitutive
Equations. Encyclopedia of Computational Mechanics. https://doi.org/10.1002/0470091355.ecm043
bibtex: '@article{Mahnken_2005, title={Identification of Material Parameters for
Constitutive Equations}, DOI={10.1002/0470091355.ecm043},
journal={Encyclopedia of Computational Mechanics}, author={Mahnken, Rolf}, year={2005}
}'
chicago: Mahnken, Rolf. “Identification of Material Parameters for Constitutive
Equations.” Encyclopedia of Computational Mechanics, 2005. https://doi.org/10.1002/0470091355.ecm043.
ieee: 'R. Mahnken, “Identification of Material Parameters for Constitutive Equations,”
Encyclopedia of Computational Mechanics, 2005, doi: 10.1002/0470091355.ecm043.'
mla: Mahnken, Rolf. “Identification of Material Parameters for Constitutive Equations.”
Encyclopedia of Computational Mechanics, 2005, doi:10.1002/0470091355.ecm043.
short: R. Mahnken, Encyclopedia of Computational Mechanics (2005).
date_created: 2021-12-14T11:47:56Z
date_updated: 2023-01-25T14:33:36Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/0470091355.ecm043
language:
- iso: eng
publication: Encyclopedia of Computational Mechanics
publication_status: published
quality_controlled: '1'
status: public
title: Identification of Material Parameters for Constitutive Equations
type: journal_article
user_id: '335'
year: '2005'
...
---
_id: '45306'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: P.
full_name: Steinmann, P.
last_name: Steinmann
citation:
ama: 'Mahnken R, Steinmann P. A Unified Sensitivity Analysis Approach for Parameter
Identification of Material Models in Fluid-saturated Porous Media. In: Solid
Mechanics and Its Applications. Kluwer Academic Publishers; 2005. doi:10.1007/0-306-46953-7_7'
apa: Mahnken, R., & Steinmann, P. (2005). A Unified Sensitivity Analysis Approach
for Parameter Identification of Material Models in Fluid-saturated Porous Media.
In Solid Mechanics and Its Applications. Kluwer Academic Publishers. https://doi.org/10.1007/0-306-46953-7_7
bibtex: '@inbook{Mahnken_Steinmann_2005, place={Dordrecht}, title={A Unified Sensitivity
Analysis Approach for Parameter Identification of Material Models in Fluid-saturated
Porous Media}, DOI={10.1007/0-306-46953-7_7},
booktitle={Solid Mechanics and Its Applications}, publisher={Kluwer Academic Publishers},
author={Mahnken, Rolf and Steinmann, P.}, year={2005} }'
chicago: 'Mahnken, Rolf, and P. Steinmann. “A Unified Sensitivity Analysis Approach
for Parameter Identification of Material Models in Fluid-Saturated Porous Media.”
In Solid Mechanics and Its Applications. Dordrecht: Kluwer Academic Publishers,
2005. https://doi.org/10.1007/0-306-46953-7_7.'
ieee: 'R. Mahnken and P. Steinmann, “A Unified Sensitivity Analysis Approach for
Parameter Identification of Material Models in Fluid-saturated Porous Media,”
in Solid Mechanics and Its Applications, Dordrecht: Kluwer Academic Publishers,
2005.'
mla: Mahnken, Rolf, and P. Steinmann. “A Unified Sensitivity Analysis Approach for
Parameter Identification of Material Models in Fluid-Saturated Porous Media.”
Solid Mechanics and Its Applications, Kluwer Academic Publishers, 2005,
doi:10.1007/0-306-46953-7_7.
short: 'R. Mahnken, P. Steinmann, in: Solid Mechanics and Its Applications, Kluwer
Academic Publishers, Dordrecht, 2005.'
date_created: 2023-05-26T12:16:57Z
date_updated: 2023-05-26T12:18:58Z
department:
- _id: '9'
- _id: '154'
doi: 10.1007/0-306-46953-7_7
language:
- iso: eng
place: Dordrecht
publication: Solid Mechanics and Its Applications
publication_identifier:
isbn:
- '0792367669'
publication_status: published
publisher: Kluwer Academic Publishers
quality_controlled: '1'
status: public
title: A Unified Sensitivity Analysis Approach for Parameter Identification of Material
Models in Fluid-saturated Porous Media
type: book_chapter
user_id: '335'
year: '2005'
...
---
_id: '45416'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
citation:
ama: Mahnken R. An inverse finite-element algorithm for parameter identification
of thermoelastic damage models. International Journal for Numerical Methods
in Engineering. 2005;48(7):1015-1036. doi:10.1002/(sici)1097-0207(20000710)48:7<1015::aid-nme912>3.0.co;2-4
apa: Mahnken, R. (2005). An inverse finite-element algorithm for parameter identification
of thermoelastic damage models. International Journal for Numerical Methods
in Engineering, 48(7), 1015–1036. https://doi.org/10.1002/(sici)1097-0207(20000710)48:7<1015::aid-nme912>3.0.co;2-4
bibtex: '@article{Mahnken_2005, title={An inverse finite-element algorithm for parameter
identification of thermoelastic damage models}, volume={48}, DOI={10.1002/(sici)1097-0207(20000710)48:7<1015::aid-nme912>3.0.co;2-4},
number={7}, journal={International Journal for Numerical Methods in Engineering},
publisher={Wiley}, author={Mahnken, Rolf}, year={2005}, pages={1015–1036} }'
chicago: 'Mahnken, Rolf. “An Inverse Finite-Element Algorithm for Parameter Identification
of Thermoelastic Damage Models.” International Journal for Numerical Methods
in Engineering 48, no. 7 (2005): 1015–36. https://doi.org/10.1002/(sici)1097-0207(20000710)48:7<1015::aid-nme912>3.0.co;2-4.'
ieee: 'R. Mahnken, “An inverse finite-element algorithm for parameter identification
of thermoelastic damage models,” International Journal for Numerical Methods
in Engineering, vol. 48, no. 7, pp. 1015–1036, 2005, doi: 10.1002/(sici)1097-0207(20000710)48:7<1015::aid-nme912>3.0.co;2-4.'
mla: Mahnken, Rolf. “An Inverse Finite-Element Algorithm for Parameter Identification
of Thermoelastic Damage Models.” International Journal for Numerical Methods
in Engineering, vol. 48, no. 7, Wiley, 2005, pp. 1015–36, doi:10.1002/(sici)1097-0207(20000710)48:7<1015::aid-nme912>3.0.co;2-4.
short: R. Mahnken, International Journal for Numerical Methods in Engineering 48
(2005) 1015–1036.
date_created: 2023-05-31T12:02:23Z
date_updated: 2023-05-31T12:02:56Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/(sici)1097-0207(20000710)48:7<1015::aid-nme912>3.0.co;2-4
intvolume: ' 48'
issue: '7'
keyword:
- Applied Mathematics
- General Engineering
- Numerical Analysis
language:
- iso: eng
page: 1015-1036
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
issn:
- 0029-5981
- 1097-0207
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: An inverse finite-element algorithm for parameter identification of thermoelastic
damage models
type: journal_article
user_id: '335'
volume: 48
year: '2005'
...
---
_id: '45433'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: E.
full_name: Stein, E.
last_name: Stein
- first_name: D.
full_name: Bischoff, D.
last_name: Bischoff
citation:
ama: Mahnken R, Stein E, Bischoff D. A stabilization procedure by line-search computation
for first order approximation strategies in structural optimization. International
Journal for Numerical Methods in Engineering. 2005;35(5):1015-1029. doi:10.1002/nme.1620350505
apa: Mahnken, R., Stein, E., & Bischoff, D. (2005). A stabilization procedure
by line-search computation for first order approximation strategies in structural
optimization. International Journal for Numerical Methods in Engineering,
35(5), 1015–1029. https://doi.org/10.1002/nme.1620350505
bibtex: '@article{Mahnken_Stein_Bischoff_2005, title={A stabilization procedure
by line-search computation for first order approximation strategies in structural
optimization}, volume={35}, DOI={10.1002/nme.1620350505},
number={5}, journal={International Journal for Numerical Methods in Engineering},
publisher={Wiley}, author={Mahnken, Rolf and Stein, E. and Bischoff, D.}, year={2005},
pages={1015–1029} }'
chicago: 'Mahnken, Rolf, E. Stein, and D. Bischoff. “A Stabilization Procedure by
Line-Search Computation for First Order Approximation Strategies in Structural
Optimization.” International Journal for Numerical Methods in Engineering
35, no. 5 (2005): 1015–29. https://doi.org/10.1002/nme.1620350505.'
ieee: 'R. Mahnken, E. Stein, and D. Bischoff, “A stabilization procedure by line-search
computation for first order approximation strategies in structural optimization,”
International Journal for Numerical Methods in Engineering, vol. 35, no.
5, pp. 1015–1029, 2005, doi: 10.1002/nme.1620350505.'
mla: Mahnken, Rolf, et al. “A Stabilization Procedure by Line-Search Computation
for First Order Approximation Strategies in Structural Optimization.” International
Journal for Numerical Methods in Engineering, vol. 35, no. 5, Wiley, 2005,
pp. 1015–29, doi:10.1002/nme.1620350505.
short: R. Mahnken, E. Stein, D. Bischoff, International Journal for Numerical Methods
in Engineering 35 (2005) 1015–1029.
date_created: 2023-05-31T12:29:05Z
date_updated: 2023-05-31T12:29:34Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/nme.1620350505
intvolume: ' 35'
issue: '5'
keyword:
- Applied Mathematics
- General Engineering
- Numerical Analysis
language:
- iso: eng
page: 1015-1029
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
issn:
- 0029-5981
- 1097-0207
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: A stabilization procedure by line-search computation for first order approximation
strategies in structural optimization
type: journal_article
user_id: '335'
volume: 35
year: '2005'
...
---
_id: '45435'
author:
- first_name: Rolf
full_name: Mahnken, Rolf
id: '335'
last_name: Mahnken
- first_name: Erwin
full_name: Stein, Erwin
last_name: Stein
citation:
ama: Mahnken R, Stein E. Adaptive time-step control in creep analysis. International
Journal for Numerical Methods in Engineering. 2005;28(7):1619-1633. doi:10.1002/nme.1620280711
apa: Mahnken, R., & Stein, E. (2005). Adaptive time-step control in creep analysis.
International Journal for Numerical Methods in Engineering, 28(7),
1619–1633. https://doi.org/10.1002/nme.1620280711
bibtex: '@article{Mahnken_Stein_2005, title={Adaptive time-step control in creep
analysis}, volume={28}, DOI={10.1002/nme.1620280711},
number={7}, journal={International Journal for Numerical Methods in Engineering},
publisher={Wiley}, author={Mahnken, Rolf and Stein, Erwin}, year={2005}, pages={1619–1633}
}'
chicago: 'Mahnken, Rolf, and Erwin Stein. “Adaptive Time-Step Control in Creep Analysis.”
International Journal for Numerical Methods in Engineering 28, no. 7 (2005):
1619–33. https://doi.org/10.1002/nme.1620280711.'
ieee: 'R. Mahnken and E. Stein, “Adaptive time-step control in creep analysis,”
International Journal for Numerical Methods in Engineering, vol. 28, no.
7, pp. 1619–1633, 2005, doi: 10.1002/nme.1620280711.'
mla: Mahnken, Rolf, and Erwin Stein. “Adaptive Time-Step Control in Creep Analysis.”
International Journal for Numerical Methods in Engineering, vol. 28, no.
7, Wiley, 2005, pp. 1619–33, doi:10.1002/nme.1620280711.
short: R. Mahnken, E. Stein, International Journal for Numerical Methods in Engineering
28 (2005) 1619–1633.
date_created: 2023-05-31T12:30:12Z
date_updated: 2023-05-31T12:30:41Z
department:
- _id: '9'
- _id: '154'
doi: 10.1002/nme.1620280711
intvolume: ' 28'
issue: '7'
keyword:
- Applied Mathematics
- General Engineering
- Numerical Analysis
language:
- iso: eng
page: 1619-1633
publication: International Journal for Numerical Methods in Engineering
publication_identifier:
issn:
- 0029-5981
- 1097-0207
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Adaptive time-step control in creep analysis
type: journal_article
user_id: '335'
volume: 28
year: '2005'
...
---
_id: '21162'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: T.
full_name: Fuhrmann, T.
last_name: Fuhrmann
citation:
ama: 'Meschut G, Fuhrmann T. Kleben von CFK-Metall-Strukturen im Fahrzeug. In: Tagungsband
Zum 4. Kolloquium „Gemeinsame Forschung in Der Klebtechnik“ Der DECHEMA. Frankfurt:
DVS-Verlag GmbH; 2004:45-48.'
apa: 'Meschut, G., & Fuhrmann, T. (2004). Kleben von CFK-Metall-Strukturen im
Fahrzeug. In Tagungsband zum 4. Kolloquium „Gemeinsame Forschung in der Klebtechnik“
der DECHEMA (pp. 45–48). Frankfurt: DVS-Verlag GmbH.'
bibtex: '@inproceedings{Meschut_Fuhrmann_2004, place={Frankfurt}, title={Kleben
von CFK-Metall-Strukturen im Fahrzeug}, booktitle={Tagungsband zum 4. Kolloquium
„Gemeinsame Forschung in der Klebtechnik“ der DECHEMA}, publisher={DVS-Verlag
GmbH}, author={Meschut, Gerson and Fuhrmann, T.}, year={2004}, pages={45–48} }'
chicago: 'Meschut, Gerson, and T. Fuhrmann. “Kleben von CFK-Metall-Strukturen Im
Fahrzeug.” In Tagungsband Zum 4. Kolloquium „Gemeinsame Forschung in Der Klebtechnik“
Der DECHEMA, 45–48. Frankfurt: DVS-Verlag GmbH, 2004.'
ieee: G. Meschut and T. Fuhrmann, “Kleben von CFK-Metall-Strukturen im Fahrzeug,”
in Tagungsband zum 4. Kolloquium „Gemeinsame Forschung in der Klebtechnik“
der DECHEMA, Frankfurt, 2004, pp. 45–48.
mla: Meschut, Gerson, and T. Fuhrmann. “Kleben von CFK-Metall-Strukturen Im Fahrzeug.”
Tagungsband Zum 4. Kolloquium „Gemeinsame Forschung in Der Klebtechnik“ Der
DECHEMA, DVS-Verlag GmbH, 2004, pp. 45–48.
short: 'G. Meschut, T. Fuhrmann, in: Tagungsband Zum 4. Kolloquium „Gemeinsame Forschung
in Der Klebtechnik“ Der DECHEMA, DVS-Verlag GmbH, Frankfurt, 2004, pp. 45–48.'
conference:
end_date: 2004-02-18
location: Frankfurt
name: 4. Kolloquium „Gemeinsame Forschung in der Klebtechnik“ der DECHEMA, DVS,
Studiengesellschaft Stahlanwendung und FAT
start_date: 2004-02-17
date_created: 2021-02-03T13:09:11Z
date_updated: 2022-01-06T06:54:48Z
department:
- _id: '157'
language:
- iso: eng
page: 45-48
place: Frankfurt
publication: Tagungsband zum 4. Kolloquium „Gemeinsame Forschung in der Klebtechnik“
der DECHEMA
publisher: DVS-Verlag GmbH
status: public
title: Kleben von CFK-Metall-Strukturen im Fahrzeug
type: conference
user_id: '68518'
year: '2004'
...
---
_id: '21164'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Meschut G. Forschungsbedarf in der Klebtechnik aus Sicht der Automobilindustrie.
In: Frankfurt; 2004.'
apa: Meschut, G. (2004). Forschungsbedarf in der Klebtechnik aus Sicht der Automobilindustrie.
Presented at the 4. Kolloquium „Gemeinsame Forschung in der Klebtechnik“ der DECHEMA,
DVS, Studiengesellschaft Stahlanwendung und FAT, Frankfurt.
bibtex: '@inproceedings{Meschut_2004, place={Frankfurt}, title={Forschungsbedarf
in der Klebtechnik aus Sicht der Automobilindustrie}, author={Meschut, Gerson},
year={2004} }'
chicago: Meschut, Gerson. “Forschungsbedarf in Der Klebtechnik Aus Sicht Der Automobilindustrie.”
Frankfurt, 2004.
ieee: G. Meschut, “Forschungsbedarf in der Klebtechnik aus Sicht der Automobilindustrie,”
presented at the 4. Kolloquium „Gemeinsame Forschung in der Klebtechnik“ der DECHEMA,
DVS, Studiengesellschaft Stahlanwendung und FAT, Frankfurt, 2004.
mla: Meschut, Gerson. Forschungsbedarf in Der Klebtechnik Aus Sicht Der Automobilindustrie.
2004.
short: 'G. Meschut, in: Frankfurt, 2004.'
conference:
end_date: 2004-02-18
location: Frankfurt
name: 4. Kolloquium „Gemeinsame Forschung in der Klebtechnik“ der DECHEMA, DVS,
Studiengesellschaft Stahlanwendung und FAT
start_date: 2004-02-17
date_created: 2021-02-03T13:11:45Z
date_updated: 2022-01-06T06:54:48Z
department:
- _id: '157'
language:
- iso: eng
place: Frankfurt
status: public
title: Forschungsbedarf in der Klebtechnik aus Sicht der Automobilindustrie
type: conference
user_id: '68518'
year: '2004'
...
---
_id: '21165'
author:
- first_name: S.
full_name: Bischof, S.
last_name: Bischof
- first_name: A.
full_name: Fricke, A.
last_name: Fricke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Bischof S, Fricke A, Meschut G. Adhesive bonding and mechanical joining for
planking of spaceframe-structures with thermoplastics. In: Tagungsband Zur
Swiss Bondung ´04. Rapperswil (CH); 2004:1-10.'
apa: Bischof, S., Fricke, A., & Meschut, G. (2004). Adhesive bonding and mechanical
joining for planking of spaceframe-structures with thermoplastics. In Tagungsband
zur Swiss Bondung ´04 (pp. 1–10). Rapperswil (CH).
bibtex: '@inproceedings{Bischof_Fricke_Meschut_2004, place={Rapperswil (CH)}, title={Adhesive
bonding and mechanical joining for planking of spaceframe-structures with thermoplastics},
booktitle={Tagungsband zur Swiss Bondung ´04}, author={Bischof, S. and Fricke,
A. and Meschut, Gerson}, year={2004}, pages={1–10} }'
chicago: Bischof, S., A. Fricke, and Gerson Meschut. “Adhesive Bonding and Mechanical
Joining for Planking of Spaceframe-Structures with Thermoplastics.” In Tagungsband
Zur Swiss Bondung ´04, 1–10. Rapperswil (CH), 2004.
ieee: S. Bischof, A. Fricke, and G. Meschut, “Adhesive bonding and mechanical joining
for planking of spaceframe-structures with thermoplastics,” in Tagungsband
zur Swiss Bondung ´04, Rapperswil (CH), 2004, pp. 1–10.
mla: Bischof, S., et al. “Adhesive Bonding and Mechanical Joining for Planking of
Spaceframe-Structures with Thermoplastics.” Tagungsband Zur Swiss Bondung ´04,
2004, pp. 1–10.
short: 'S. Bischof, A. Fricke, G. Meschut, in: Tagungsband Zur Swiss Bondung ´04,
Rapperswil (CH), 2004, pp. 1–10.'
conference:
end_date: 2004-05-19
location: Rapperswil (CH)
name: 'Swiss Bondung ´04; 18. Internationales Symposium: Adhesive Bonding – Performance
of modern bonding technology'
start_date: 2004-05-17
date_created: 2021-02-03T13:14:56Z
date_updated: 2022-01-06T06:54:48Z
department:
- _id: '157'
language:
- iso: eng
page: 1-10
place: Rapperswil (CH)
publication: Tagungsband zur Swiss Bondung ´04
status: public
title: Adhesive bonding and mechanical joining for planking of spaceframe-structures
with thermoplastics
type: conference
user_id: '68518'
year: '2004'
...
---
_id: '21166'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: M.
full_name: Goede, M.
last_name: Goede
citation:
ama: 'Meschut G, Goede M. New material and design concepts for constructions of
vehicles – challenges for thermal an cold joining techniques. In: Tagungsband
Zur 9. International Aachen Welding Conference: Joining in Traffic and Transportation
Industry – Processes, Progress, Applications. Aachen; 2004:37-47.'
apa: 'Meschut, G., & Goede, M. (2004). New material and design concepts for
constructions of vehicles – challenges for thermal an cold joining techniques.
In Tagungsband zur 9. International Aachen Welding Conference: Joining in Traffic
and Transportation Industry – Processes, Progress, Applications (pp. 37–47).
Aachen.'
bibtex: '@inproceedings{Meschut_Goede_2004, place={Aachen}, title={New material
and design concepts for constructions of vehicles – challenges for thermal an
cold joining techniques}, booktitle={Tagungsband zur 9. International Aachen Welding
Conference: Joining in Traffic and Transportation Industry – Processes, Progress,
Applications}, author={Meschut, Gerson and Goede, M.}, year={2004}, pages={37–47}
}'
chicago: 'Meschut, Gerson, and M. Goede. “New Material and Design Concepts for Constructions
of Vehicles – Challenges for Thermal an Cold Joining Techniques.” In Tagungsband
Zur 9. International Aachen Welding Conference: Joining in Traffic and Transportation
Industry – Processes, Progress, Applications, 37–47. Aachen, 2004.'
ieee: 'G. Meschut and M. Goede, “New material and design concepts for constructions
of vehicles – challenges for thermal an cold joining techniques,” in Tagungsband
zur 9. International Aachen Welding Conference: Joining in Traffic and Transportation
Industry – Processes, Progress, Applications, Aachen, 2004, pp. 37–47.'
mla: 'Meschut, Gerson, and M. Goede. “New Material and Design Concepts for Constructions
of Vehicles – Challenges for Thermal an Cold Joining Techniques.” Tagungsband
Zur 9. International Aachen Welding Conference: Joining in Traffic and Transportation
Industry – Processes, Progress, Applications, 2004, pp. 37–47.'
short: 'G. Meschut, M. Goede, in: Tagungsband Zur 9. International Aachen Welding
Conference: Joining in Traffic and Transportation Industry – Processes, Progress,
Applications, Aachen, 2004, pp. 37–47.'
conference:
end_date: 2004-06-30
location: Aachen
name: '9. International Aachen Welding Conference: Joining in Traffic and Transportation
Industry – Processes, Progress, Applications'
start_date: 2004-06-29
date_created: 2021-02-03T13:19:21Z
date_updated: 2022-01-06T06:54:48Z
department:
- _id: '157'
language:
- iso: eng
page: 37-47
place: Aachen
publication: 'Tagungsband zur 9. International Aachen Welding Conference: Joining
in Traffic and Transportation Industry – Processes, Progress, Applications'
publication_identifier:
isbn:
- ISBN 3-8322-2840-3
status: public
title: New material and design concepts for constructions of vehicles – challenges
for thermal an cold joining techniques
type: conference
user_id: '68518'
year: '2004'
...