---
_id: '57174'
abstract:
- lang: eng
text: Increasing the sustainability and resource efficiency of forming processes
is one of today's major goals. High-strength wire materials are usually available
as strip material and are subjected to a downstream forming process such as punch-bending
to produce parts for the electronics industry, for example. During the manufacturing
process of the semi-finished product, residual stresses and plastic deformations
are introduced into the wire by rolling and drawing processes. Straightening machines
are used in the production lines to compensate for these. To increase the sustainability
of these production lines, the straightening process is an essential step. Before
the continuous manufacturing process starts, the straightening process must be
set up and the optimal roller positions must be found. Once the process is set
up, the roller position settings are usually not changed. Due to missing measurement
systems for the straightening quality, it is not possible to dynamically adjust
the positions of the straightening rollers to variations in the material properties.
This leads to deviations in the dimensional accuracy of the components to be produced
and thus to an increase in the rejection rate in the manufacturing processes.
To reduce the rejection rate, a novel control system for a continuous feedback
control of a straightening process is presented in this paper. This leads to a
reduction of the rejection rate and unnecessary preforming operations in wire
straightening process. The result is an increasing sustainability and efficiency
of these production process.
author:
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Bathelt L, Djakow E, Henke C, Trächtler A. Innovative control system for straightening
machines using sensor information from downstream processes. In: Materials
Research Proceedings. Vol 41. Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-308'
apa: Bathelt, L., Djakow, E., Henke, C., & Trächtler, A. (2024). Innovative
control system for straightening machines using sensor information from downstream
processes. Materials Research Proceedings, 41. https://doi.org/10.21741/9781644903131-308
bibtex: '@inproceedings{Bathelt_Djakow_Henke_Trächtler_2024, title={Innovative control
system for straightening machines using sensor information from downstream processes},
volume={41}, DOI={10.21741/9781644903131-308},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Bathelt, Lukas and Djakow, Eugen and Henke, Christian and Trächtler,
Ansgar}, year={2024} }'
chicago: Bathelt, Lukas, Eugen Djakow, Christian Henke, and Ansgar Trächtler. “Innovative
Control System for Straightening Machines Using Sensor Information from Downstream
Processes.” In Materials Research Proceedings, Vol. 41. Materials Research
Forum LLC, 2024. https://doi.org/10.21741/9781644903131-308.
ieee: 'L. Bathelt, E. Djakow, C. Henke, and A. Trächtler, “Innovative control system
for straightening machines using sensor information from downstream processes,”
in Materials Research Proceedings, 2024, vol. 41, doi: 10.21741/9781644903131-308.'
mla: Bathelt, Lukas, et al. “Innovative Control System for Straightening Machines
Using Sensor Information from Downstream Processes.” Materials Research Proceedings,
vol. 41, Materials Research Forum LLC, 2024, doi:10.21741/9781644903131-308.
short: 'L. Bathelt, E. Djakow, C. Henke, A. Trächtler, in: Materials Research Proceedings,
Materials Research Forum LLC, 2024.'
date_created: 2024-11-18T10:08:22Z
date_updated: 2024-11-18T10:42:37Z
department:
- _id: '241'
- _id: '153'
doi: 10.21741/9781644903131-308
intvolume: ' 41'
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Innovative control system for straightening machines using sensor information
from downstream processes
type: conference
user_id: '41470'
volume: 41
year: '2024'
...
---
_id: '57178'
abstract:
- lang: eng
text: The incremental flow forming process is currently enhanced in research context
by special closed-loop property control concepts to increase the productivity
and to control the product properties making invisible property structures like
a magnetic barcode possible. However, it is preferred to establish property control
concepts on single roller machines instead of conventional machines with three
roller actuation due to the better machine accessibility. For those single roller
machines, rather poor surface qualities of flow formed workpieces were observed
in the past especially for hydraulic actuators. Thus, a new actuator closed-loop
position control concept is developed in this paper using model-based control
design methods and taking the flow forming forces as a load into account. The
novel closed-loop control is validated during workpiece production at the actual
single roller flow forming machine. An analysis of the manufactured workpieces
show that the surface quality is significantly enhanced by the new control to
a roughness level almost similar to conventional three roller flow forming. Thus,
a sincere added value to the flow forming process is offered by the novel actuator
closed-loop position control.
author:
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Sebastian
full_name: Sander, Sebastian
last_name: Sander
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: 'Kersting L, Sander S, Arian B, et al. Improving the flow forming process by
a novel closed-loop control. In: Materials Research Proceedings. Vol 41.
Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-158'
apa: Kersting, L., Sander, S., Arian, B., Rozo Vasquez, J., Trächtler, A., Homberg,
W., & Walther, F. (2024). Improving the flow forming process by a novel closed-loop
control. Materials Research Proceedings, 41. https://doi.org/10.21741/9781644903131-158
bibtex: '@inproceedings{Kersting_Sander_Arian_Rozo Vasquez_Trächtler_Homberg_Walther_2024,
title={Improving the flow forming process by a novel closed-loop control}, volume={41},
DOI={10.21741/9781644903131-158},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Kersting, Lukas and Sander, Sebastian and Arian, Bahman and Rozo
Vasquez, Julian and Trächtler, Ansgar and Homberg, Werner and Walther, Frank},
year={2024} }'
chicago: Kersting, Lukas, Sebastian Sander, Bahman Arian, Julian Rozo Vasquez, Ansgar
Trächtler, Werner Homberg, and Frank Walther. “Improving the Flow Forming Process
by a Novel Closed-Loop Control.” In Materials Research Proceedings, Vol.
41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-158.
ieee: 'L. Kersting et al., “Improving the flow forming process by a novel
closed-loop control,” in Materials Research Proceedings, 2024, vol. 41,
doi: 10.21741/9781644903131-158.'
mla: Kersting, Lukas, et al. “Improving the Flow Forming Process by a Novel Closed-Loop
Control.” Materials Research Proceedings, vol. 41, Materials Research Forum
LLC, 2024, doi:10.21741/9781644903131-158.
short: 'L. Kersting, S. Sander, B. Arian, J. Rozo Vasquez, A. Trächtler, W. Homberg,
F. Walther, in: Materials Research Proceedings, Materials Research Forum LLC,
2024.'
date_created: 2024-11-18T10:11:24Z
date_updated: 2024-11-18T10:41:46Z
department:
- _id: '153'
- _id: '241'
- _id: '156'
doi: 10.21741/9781644903131-158
intvolume: ' 41'
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Improving the flow forming process by a novel closed-loop control
type: conference
user_id: '41470'
volume: 41
year: '2024'
...
---
_id: '57183'
abstract:
- lang: eng
text: In multi-stage bending and straightening operations cross-stage and quantity-dependent
effects crucially affect the quality of the end product. Using punch-bending units
in combination with a mechatronic straightening device can improve the accuracy
and repeatability of product features remarkably well. In this work a concept
for an innovative hybrid model of a roll straightener in a multi-stage straightening
and multi-stage bending process is proposed. This model combines data-driven elements
with expert knowledge and aims to minimise residual errors of the roll straightener
to reliably decrease the risk of disadvantageous cross-stage and quantity-dependent
effects on a subsequent punch-bending process.
author:
- first_name: Henning
full_name: Peters, Henning
last_name: Peters
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Tim
full_name: Rostek, Tim
id: '3469'
last_name: Rostek
- first_name: Andreas
full_name: Mazur, Andreas
last_name: Mazur
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Barbara
full_name: Hammer, Barbara
last_name: Hammer
citation:
ama: 'Peters H, Djakow E, Rostek T, et al. Novel approach for data-driven modelling
of multi-stage straightening and bending processes. In: Materials Research
Proceedings. Vol 41. Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-252'
apa: Peters, H., Djakow, E., Rostek, T., Mazur, A., Trächtler, A., Homberg, W.,
& Hammer, B. (2024). Novel approach for data-driven modelling of multi-stage
straightening and bending processes. Materials Research Proceedings, 41.
https://doi.org/10.21741/9781644903131-252
bibtex: '@inproceedings{Peters_Djakow_Rostek_Mazur_Trächtler_Homberg_Hammer_2024,
title={Novel approach for data-driven modelling of multi-stage straightening and
bending processes}, volume={41}, DOI={10.21741/9781644903131-252},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Peters, Henning and Djakow, Eugen and Rostek, Tim and Mazur, Andreas
and Trächtler, Ansgar and Homberg, Werner and Hammer, Barbara}, year={2024} }'
chicago: Peters, Henning, Eugen Djakow, Tim Rostek, Andreas Mazur, Ansgar Trächtler,
Werner Homberg, and Barbara Hammer. “Novel Approach for Data-Driven Modelling
of Multi-Stage Straightening and Bending Processes.” In Materials Research
Proceedings, Vol. 41. Materials Research Forum LLC, 2024. https://doi.org/10.21741/9781644903131-252.
ieee: 'H. Peters et al., “Novel approach for data-driven modelling of multi-stage
straightening and bending processes,” in Materials Research Proceedings,
2024, vol. 41, doi: 10.21741/9781644903131-252.'
mla: Peters, Henning, et al. “Novel Approach for Data-Driven Modelling of Multi-Stage
Straightening and Bending Processes.” Materials Research Proceedings, vol.
41, Materials Research Forum LLC, 2024, doi:10.21741/9781644903131-252.
short: 'H. Peters, E. Djakow, T. Rostek, A. Mazur, A. Trächtler, W. Homberg, B.
Hammer, in: Materials Research Proceedings, Materials Research Forum LLC, 2024.'
date_created: 2024-11-18T10:15:37Z
date_updated: 2024-11-18T10:40:50Z
department:
- _id: '153'
- _id: '241'
- _id: '156'
doi: 10.21741/9781644903131-252
intvolume: ' 41'
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Novel approach for data-driven modelling of multi-stage straightening and bending
processes
type: conference
user_id: '41470'
volume: 41
year: '2024'
...
---
_id: '57171'
abstract:
- lang: eng
text: In manufacturing, property control ensures efficient part production. However,
in reverse flow forming, current practices focus on geometry control rather than
property control. To address the complexity of the process and tool machine interaction,
process control is crucial for defined component properties. This study focuses
on controlling local α’ martensite content in reverse flow forming of seamless
AISI 304L steel tubes. Strategies and systems are presented to influence α’ martensite
content, creating unique microstructure profiles for 1D and 2D Gradings, with
tangible component outcomes.
author:
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
citation:
ama: 'Arian B, Homberg W, Kersting L, Trächtler A, Rozo Vasquez J, Walther F. Thermomechanical
reverse flow forming of AISI 304L. In: Materials Research Proceedings.
Vol 41. Materials Research Forum LLC; 2024. doi:10.21741/9781644903131-151'
apa: Arian, B., Homberg, W., Kersting, L., Trächtler, A., Rozo Vasquez, J., &
Walther, F. (2024). Thermomechanical reverse flow forming of AISI 304L. Materials
Research Proceedings, 41. https://doi.org/10.21741/9781644903131-151
bibtex: '@inproceedings{Arian_Homberg_Kersting_Trächtler_Rozo Vasquez_Walther_2024,
title={Thermomechanical reverse flow forming of AISI 304L}, volume={41}, DOI={10.21741/9781644903131-151},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Arian, Bahman and Homberg, Werner and Kersting, Lukas and Trächtler,
Ansgar and Rozo Vasquez, Julian and Walther, Frank}, year={2024} }'
chicago: Arian, Bahman, Werner Homberg, Lukas Kersting, Ansgar Trächtler, Julian
Rozo Vasquez, and Frank Walther. “Thermomechanical Reverse Flow Forming of AISI
304L.” In Materials Research Proceedings, Vol. 41. Materials Research Forum
LLC, 2024. https://doi.org/10.21741/9781644903131-151.
ieee: 'B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, and F.
Walther, “Thermomechanical reverse flow forming of AISI 304L,” in Materials
Research Proceedings, 2024, vol. 41, doi: 10.21741/9781644903131-151.'
mla: Arian, Bahman, et al. “Thermomechanical Reverse Flow Forming of AISI 304L.”
Materials Research Proceedings, vol. 41, Materials Research Forum LLC,
2024, doi:10.21741/9781644903131-151.
short: 'B. Arian, W. Homberg, L. Kersting, A. Trächtler, J. Rozo Vasquez, F. Walther,
in: Materials Research Proceedings, Materials Research Forum LLC, 2024.'
date_created: 2024-11-18T10:02:38Z
date_updated: 2024-11-18T10:42:49Z
department:
- _id: '241'
- _id: '153'
- _id: '156'
doi: 10.21741/9781644903131-151
intvolume: ' 41'
language:
- iso: eng
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: Thermomechanical reverse flow forming of AISI 304L
type: conference
user_id: '41470'
volume: 41
year: '2024'
...
---
_id: '57177'
author:
- first_name: Julien
full_name: Jahneke, Julien
last_name: Jahneke
- first_name: Udo
full_name: Nolte, Udo
last_name: Nolte
- first_name: Mark
full_name: Henkenjohann, Mark
last_name: Henkenjohann
- first_name: Tobias
full_name: Seidenberg, Tobias
last_name: Seidenberg
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Jahneke J, Nolte U, Henkenjohann M, Seidenberg T, Henke C, Trächtler A. Development
and Implementation of a Modular Interface for a DroneCAN Communication Bus. In:
2024 IEEE Aerospace Conference. IEEE; 2024. doi:10.1109/aero58975.2024.10521247'
apa: Jahneke, J., Nolte, U., Henkenjohann, M., Seidenberg, T., Henke, C., &
Trächtler, A. (2024). Development and Implementation of a Modular Interface for
a DroneCAN Communication Bus. 2024 IEEE Aerospace Conference. https://doi.org/10.1109/aero58975.2024.10521247
bibtex: '@inproceedings{Jahneke_Nolte_Henkenjohann_Seidenberg_Henke_Trächtler_2024,
title={Development and Implementation of a Modular Interface for a DroneCAN Communication
Bus}, DOI={10.1109/aero58975.2024.10521247},
booktitle={2024 IEEE Aerospace Conference}, publisher={IEEE}, author={Jahneke,
Julien and Nolte, Udo and Henkenjohann, Mark and Seidenberg, Tobias and Henke,
Christian and Trächtler, Ansgar}, year={2024} }'
chicago: Jahneke, Julien, Udo Nolte, Mark Henkenjohann, Tobias Seidenberg, Christian
Henke, and Ansgar Trächtler. “Development and Implementation of a Modular Interface
for a DroneCAN Communication Bus.” In 2024 IEEE Aerospace Conference. IEEE,
2024. https://doi.org/10.1109/aero58975.2024.10521247.
ieee: 'J. Jahneke, U. Nolte, M. Henkenjohann, T. Seidenberg, C. Henke, and A. Trächtler,
“Development and Implementation of a Modular Interface for a DroneCAN Communication
Bus,” 2024, doi: 10.1109/aero58975.2024.10521247.'
mla: Jahneke, Julien, et al. “Development and Implementation of a Modular Interface
for a DroneCAN Communication Bus.” 2024 IEEE Aerospace Conference, IEEE,
2024, doi:10.1109/aero58975.2024.10521247.
short: 'J. Jahneke, U. Nolte, M. Henkenjohann, T. Seidenberg, C. Henke, A. Trächtler,
in: 2024 IEEE Aerospace Conference, IEEE, 2024.'
date_created: 2024-11-18T10:10:45Z
date_updated: 2024-11-18T10:42:01Z
department:
- _id: '241'
- _id: '153'
doi: 10.1109/aero58975.2024.10521247
language:
- iso: eng
publication: 2024 IEEE Aerospace Conference
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Development and Implementation of a Modular Interface for a DroneCAN Communication
Bus
type: conference
user_id: '41470'
year: '2024'
...
---
_id: '57180'
author:
- first_name: Cederic
full_name: Lenz, Cederic
last_name: Lenz
- first_name: Maximilian
full_name: Bause, Maximilian
id: '52175'
last_name: Bause
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Lenz C, Bause M, Henke C, Trächtler A. Boosting Low Data PINN Robustness with
Transfer Learning*. In: 2024 International Conference on Advanced Robotics
and Mechatronics (ICARM). IEEE; 2024. doi:10.1109/icarm62033.2024.10715896'
apa: Lenz, C., Bause, M., Henke, C., & Trächtler, A. (2024). Boosting Low Data
PINN Robustness with Transfer Learning*. 2024 International Conference on Advanced
Robotics and Mechatronics (ICARM). https://doi.org/10.1109/icarm62033.2024.10715896
bibtex: '@inproceedings{Lenz_Bause_Henke_Trächtler_2024, title={Boosting Low Data
PINN Robustness with Transfer Learning*}, DOI={10.1109/icarm62033.2024.10715896},
booktitle={2024 International Conference on Advanced Robotics and Mechatronics
(ICARM)}, publisher={IEEE}, author={Lenz, Cederic and Bause, Maximilian and Henke,
Christian and Trächtler, Ansgar}, year={2024} }'
chicago: Lenz, Cederic, Maximilian Bause, Christian Henke, and Ansgar Trächtler.
“Boosting Low Data PINN Robustness with Transfer Learning*.” In 2024 International
Conference on Advanced Robotics and Mechatronics (ICARM). IEEE, 2024. https://doi.org/10.1109/icarm62033.2024.10715896.
ieee: 'C. Lenz, M. Bause, C. Henke, and A. Trächtler, “Boosting Low Data PINN Robustness
with Transfer Learning*,” 2024, doi: 10.1109/icarm62033.2024.10715896.'
mla: Lenz, Cederic, et al. “Boosting Low Data PINN Robustness with Transfer Learning*.”
2024 International Conference on Advanced Robotics and Mechatronics (ICARM),
IEEE, 2024, doi:10.1109/icarm62033.2024.10715896.
short: 'C. Lenz, M. Bause, C. Henke, A. Trächtler, in: 2024 International Conference
on Advanced Robotics and Mechatronics (ICARM), IEEE, 2024.'
date_created: 2024-11-18T10:14:14Z
date_updated: 2024-11-18T10:41:11Z
department:
- _id: '153'
- _id: '241'
doi: 10.1109/icarm62033.2024.10715896
language:
- iso: eng
publication: 2024 International Conference on Advanced Robotics and Mechatronics (ICARM)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Boosting Low Data PINN Robustness with Transfer Learning*
type: conference
user_id: '41470'
year: '2024'
...
---
_id: '56347'
abstract:
- lang: eng
text: The content of university teaching in engineering sciences, particularly
in product creation, is characterised by the development of application skills.
Changing working conditions require new teaching concepts that are oriented towards
the needs of students and practice and consider the acquisition of soft skills.
A key method to be considered in this context is the Scenario-Technique. In this
paper, a one-day workshop based on a software tool for the Scenario-Technique
is presented that focusses on competence development for Scenario-Technique in
form of a learning concept. Based on a systematic literature analysis, existing
approaches for learning the Scenario-Technique are identified and requirements
for a subsequently developed software-supported Scenario-Technique workshop are
established. Using a case study, the learning concept is validated in two test
phases for comprehensibility, user-friendliness, and practical suitability. The
result is a concept that enables practice-oriented learning of the Scenario-Technique.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Alena Marie
full_name: Tusek, Alena Marie
id: '59370'
last_name: Tusek
citation:
ama: 'Gräßler I, Tusek AM. Case study on the software-supported development of competences
in Scenario-Technique. In: AHFE International. Vol 158. AHFE International;
2024. doi:10.54941/ahfe1005548'
apa: Gräßler, I., & Tusek, A. M. (2024). Case study on the software-supported
development of competences in Scenario-Technique. AHFE International, 158.
https://doi.org/10.54941/ahfe1005548
bibtex: '@inproceedings{Gräßler_Tusek_2024, title={Case study on the software-supported
development of competences in Scenario-Technique}, volume={158}, DOI={10.54941/ahfe1005548},
booktitle={AHFE International}, publisher={AHFE International}, author={Gräßler,
Iris and Tusek, Alena Marie}, year={2024} }'
chicago: Gräßler, Iris, and Alena Marie Tusek. “Case Study on the Software-Supported
Development of Competences in Scenario-Technique.” In AHFE International,
Vol. 158. AHFE International, 2024. https://doi.org/10.54941/ahfe1005548.
ieee: 'I. Gräßler and A. M. Tusek, “Case study on the software-supported development
of competences in Scenario-Technique,” in AHFE International, Split, 2024,
vol. 158, doi: 10.54941/ahfe1005548.'
mla: Gräßler, Iris, and Alena Marie Tusek. “Case Study on the Software-Supported
Development of Competences in Scenario-Technique.” AHFE International,
vol. 158, AHFE International, 2024, doi:10.54941/ahfe1005548.
short: 'I. Gräßler, A.M. Tusek, in: AHFE International, AHFE International, 2024.'
conference:
end_date: 2024-09-26
location: Split
name: 'Human Systems Engineering and Design (IHSED2024): Future Trends and Applications'
start_date: 2024-09-24
date_created: 2024-10-07T08:14:54Z
date_updated: 2024-11-19T09:46:46Z
department:
- _id: '152'
doi: 10.54941/ahfe1005548
intvolume: ' 158'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://openaccess.cms-conferences.org/publications/book/978-1-964867-34-2/article/978-1-964867-34-2_25
oa: '1'
publication: AHFE International
publication_status: published
publisher: AHFE International
quality_controlled: '1'
status: public
title: Case study on the software-supported development of competences in Scenario-Technique
type: conference
user_id: '59370'
volume: 158
year: '2024'
...
---
_id: '57101'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Sven
full_name: Rarbach, Sven
id: '67999'
last_name: Rarbach
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
citation:
ama: 'Gräßler I, Rarbach S, Wiechel D. Artifact-Oriented Tailoring Approach for
Model-Based Impact Analysis. In: 2024 IEEE International Symposium on Systems
Engineering (ISSE). IEEE; 2024. doi:10.1109/isse63315.2024.10741104'
apa: Gräßler, I., Rarbach, S., & Wiechel, D. (2024). Artifact-Oriented Tailoring
Approach for Model-Based Impact Analysis. 2024 IEEE International Symposium
on Systems Engineering (ISSE). 2024 IEEE International Symposium on Systems
Engineering (ISSE), Perugia, Italy. https://doi.org/10.1109/isse63315.2024.10741104
bibtex: '@inproceedings{Gräßler_Rarbach_Wiechel_2024, title={Artifact-Oriented Tailoring
Approach for Model-Based Impact Analysis}, DOI={10.1109/isse63315.2024.10741104},
booktitle={2024 IEEE International Symposium on Systems Engineering (ISSE)}, publisher={IEEE},
author={Gräßler, Iris and Rarbach, Sven and Wiechel, Dominik}, year={2024} }'
chicago: Gräßler, Iris, Sven Rarbach, and Dominik Wiechel. “Artifact-Oriented Tailoring
Approach for Model-Based Impact Analysis.” In 2024 IEEE International Symposium
on Systems Engineering (ISSE). IEEE, 2024. https://doi.org/10.1109/isse63315.2024.10741104.
ieee: 'I. Gräßler, S. Rarbach, and D. Wiechel, “Artifact-Oriented Tailoring Approach
for Model-Based Impact Analysis,” presented at the 2024 IEEE International Symposium
on Systems Engineering (ISSE), Perugia, Italy, 2024, doi: 10.1109/isse63315.2024.10741104.'
mla: Gräßler, Iris, et al. “Artifact-Oriented Tailoring Approach for Model-Based
Impact Analysis.” 2024 IEEE International Symposium on Systems Engineering
(ISSE), IEEE, 2024, doi:10.1109/isse63315.2024.10741104.
short: 'I. Gräßler, S. Rarbach, D. Wiechel, in: 2024 IEEE International Symposium
on Systems Engineering (ISSE), IEEE, 2024.'
conference:
end_date: 2024-10-18
location: Perugia, Italy
name: 2024 IEEE International Symposium on Systems Engineering (ISSE)
start_date: 2024-10-16
date_created: 2024-11-15T07:36:23Z
date_updated: 2024-11-15T07:38:22Z
department:
- _id: '152'
doi: 10.1109/isse63315.2024.10741104
language:
- iso: eng
publication: 2024 IEEE International Symposium on Systems Engineering (ISSE)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Artifact-Oriented Tailoring Approach for Model-Based Impact Analysis
type: conference
user_id: '67999'
year: '2024'
...
---
_id: '57181'
author:
- first_name: Cederic
full_name: Lenz, Cederic
last_name: Lenz
- first_name: Maximilian
full_name: Bause, Maximilian
id: '52175'
last_name: Bause
- first_name: Fabian
full_name: Reiling, Fabian
last_name: Reiling
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Lenz C, Bause M, Reiling F, Henke C, Trächtler A. Contextual Anomaly Detection
in Hot Forming Production Line using PINN Architecture. In: 2024 IEEE International
Conference on Advanced Intelligent Mechatronics (AIM). IEEE; 2024. doi:10.1109/aim55361.2024.10637234'
apa: Lenz, C., Bause, M., Reiling, F., Henke, C., & Trächtler, A. (2024). Contextual
Anomaly Detection in Hot Forming Production Line using PINN Architecture. 2024
IEEE International Conference on Advanced Intelligent Mechatronics (AIM).
https://doi.org/10.1109/aim55361.2024.10637234
bibtex: '@inproceedings{Lenz_Bause_Reiling_Henke_Trächtler_2024, title={Contextual
Anomaly Detection in Hot Forming Production Line using PINN Architecture}, DOI={10.1109/aim55361.2024.10637234},
booktitle={2024 IEEE International Conference on Advanced Intelligent Mechatronics
(AIM)}, publisher={IEEE}, author={Lenz, Cederic and Bause, Maximilian and Reiling,
Fabian and Henke, Christian and Trächtler, Ansgar}, year={2024} }'
chicago: Lenz, Cederic, Maximilian Bause, Fabian Reiling, Christian Henke, and Ansgar
Trächtler. “Contextual Anomaly Detection in Hot Forming Production Line Using
PINN Architecture.” In 2024 IEEE International Conference on Advanced Intelligent
Mechatronics (AIM). IEEE, 2024. https://doi.org/10.1109/aim55361.2024.10637234.
ieee: 'C. Lenz, M. Bause, F. Reiling, C. Henke, and A. Trächtler, “Contextual Anomaly
Detection in Hot Forming Production Line using PINN Architecture,” 2024, doi:
10.1109/aim55361.2024.10637234.'
mla: Lenz, Cederic, et al. “Contextual Anomaly Detection in Hot Forming Production
Line Using PINN Architecture.” 2024 IEEE International Conference on Advanced
Intelligent Mechatronics (AIM), IEEE, 2024, doi:10.1109/aim55361.2024.10637234.
short: 'C. Lenz, M. Bause, F. Reiling, C. Henke, A. Trächtler, in: 2024 IEEE International
Conference on Advanced Intelligent Mechatronics (AIM), IEEE, 2024.'
date_created: 2024-11-18T10:14:46Z
date_updated: 2024-11-18T10:47:15Z
department:
- _id: '153'
- _id: '241'
doi: 10.1109/aim55361.2024.10637234
language:
- iso: eng
publication: 2024 IEEE International Conference on Advanced Intelligent Mechatronics
(AIM)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Contextual Anomaly Detection in Hot Forming Production Line using PINN Architecture
type: conference
user_id: '41470'
year: '2024'
...
---
_id: '54540'
abstract:
- lang: eng
text: 'AbstractSystem models are used to merge
relevant engineering artefacts and relationships. Therefore, a high model quality
must be ensured. Currently, there is no method for defining company-specific metrics
to assess system model quality. In a six-step research approach, a method is defined:
(1) literature analysis on quality assessment approaches, (2) derivation of success
factors, (3) evaluation of approaches, (4) development of a method, (5) application
in automotive industry, and (6) evaluation. The method supports system engineers
to derive tailored metrics to objectively assess the model quality.'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
- first_name: Deniz
full_name: Özcan, Deniz
id: '58595'
last_name: Özcan
- first_name: Patrick
full_name: Taplick, Patrick
last_name: Taplick
citation:
ama: 'Gräßler I, Wiechel D, Özcan D, Taplick P. Tailored metrics for assessing the
quality of MBSE models. In: Proceedings of the Design Society. Vol 4. Cambridge
University Press (CUP); 2024:2545-2554. doi:10.1017/pds.2024.257'
apa: Gräßler, I., Wiechel, D., Özcan, D., & Taplick, P. (2024). Tailored metrics
for assessing the quality of MBSE models. Proceedings of the Design Society,
4, 2545–2554. https://doi.org/10.1017/pds.2024.257
bibtex: '@inproceedings{Gräßler_Wiechel_Özcan_Taplick_2024, title={Tailored metrics
for assessing the quality of MBSE models}, volume={4}, DOI={10.1017/pds.2024.257},
booktitle={Proceedings of the Design Society}, publisher={Cambridge University
Press (CUP)}, author={Gräßler, Iris and Wiechel, Dominik and Özcan, Deniz and
Taplick, Patrick}, year={2024}, pages={2545–2554} }'
chicago: Gräßler, Iris, Dominik Wiechel, Deniz Özcan, and Patrick Taplick. “Tailored
Metrics for Assessing the Quality of MBSE Models.” In Proceedings of the Design
Society, 4:2545–54. Cambridge University Press (CUP), 2024. https://doi.org/10.1017/pds.2024.257.
ieee: 'I. Gräßler, D. Wiechel, D. Özcan, and P. Taplick, “Tailored metrics for assessing
the quality of MBSE models,” in Proceedings of the Design Society, 2024,
vol. 4, pp. 2545–2554, doi: 10.1017/pds.2024.257.'
mla: Gräßler, Iris, et al. “Tailored Metrics for Assessing the Quality of MBSE Models.”
Proceedings of the Design Society, vol. 4, Cambridge University Press (CUP),
2024, pp. 2545–54, doi:10.1017/pds.2024.257.
short: 'I. Gräßler, D. Wiechel, D. Özcan, P. Taplick, in: Proceedings of the Design
Society, Cambridge University Press (CUP), 2024, pp. 2545–2554.'
date_created: 2024-05-31T13:27:01Z
date_updated: 2024-11-19T08:59:57Z
department:
- _id: '152'
doi: 10.1017/pds.2024.257
intvolume: ' 4'
language:
- iso: eng
page: 2545-2554
publication: Proceedings of the Design Society
publication_identifier:
issn:
- 2732-527X
publication_status: published
publisher: Cambridge University Press (CUP)
quality_controlled: '1'
status: public
title: Tailored metrics for assessing the quality of MBSE models
type: conference
user_id: '58595'
volume: 4
year: '2024'
...
---
_id: '46451'
abstract:
- lang: eng
text: 'New technologies and materials carry significant potential for sustainable
production and use of products. As an example, Additive Manufacturing technologies
and materials promise lightweight design and energy efficient use of parts. Exhausting
the full potential requires: a) consideration of uncertainties with respect to
future capabilities, and b) upgradeable design guidelines to cover advancements
consistently. The proposed approach merges concepts of Design-for-X with foresight
algorithms of Scenario-Technique to derive actionable knowledge. It is validated
by an application in the field of Additive Manufacturing, namely Metal Fused Deposition
Modelling. Engineers benefit from the intuitive access to heterogeneous types
of sustainability related information.'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Philipp
full_name: Jung, Philipp
last_name: Jung
- first_name: Philipp
full_name: Hesse, Philipp
id: '60633'
last_name: Hesse
citation:
ama: 'Gräßler I, Mozgova I, Pottebaum J, Ott M, Jung P, Hesse P. Handling of uncertainties
in the design of sustainable Additive Manufacturing products by merging Design-for-X
and Scenario-Technique. In: 17th CIRP Conference on Intelligent Computation
in Manufacturing Engineering. Vol 126. Procedia CIRP. Elsevier; 2024:549-554.
doi:10.1016/j.procir.2024.08.238'
apa: Gräßler, I., Mozgova, I., Pottebaum, J., Ott, M., Jung, P., & Hesse, P.
(2024). Handling of uncertainties in the design of sustainable Additive Manufacturing
products by merging Design-for-X and Scenario-Technique. 17th CIRP Conference
on Intelligent Computation in Manufacturing Engineering, 126, 549–554.
https://doi.org/10.1016/j.procir.2024.08.238
bibtex: '@inproceedings{Gräßler_Mozgova_Pottebaum_Ott_Jung_Hesse_2024, series={Procedia
CIRP}, title={Handling of uncertainties in the design of sustainable Additive
Manufacturing products by merging Design-for-X and Scenario-Technique}, volume={126},
DOI={10.1016/j.procir.2024.08.238},
booktitle={17th CIRP Conference on Intelligent Computation in Manufacturing Engineering},
publisher={Elsevier}, author={Gräßler, Iris and Mozgova, Iryna and Pottebaum,
Jens and Ott, Manuel and Jung, Philipp and Hesse, Philipp}, year={2024}, pages={549–554},
collection={Procedia CIRP} }'
chicago: Gräßler, Iris, Iryna Mozgova, Jens Pottebaum, Manuel Ott, Philipp Jung,
and Philipp Hesse. “Handling of Uncertainties in the Design of Sustainable Additive
Manufacturing Products by Merging Design-for-X and Scenario-Technique.” In 17th
CIRP Conference on Intelligent Computation in Manufacturing Engineering, 126:549–54.
Procedia CIRP. Elsevier, 2024. https://doi.org/10.1016/j.procir.2024.08.238.
ieee: 'I. Gräßler, I. Mozgova, J. Pottebaum, M. Ott, P. Jung, and P. Hesse, “Handling
of uncertainties in the design of sustainable Additive Manufacturing products
by merging Design-for-X and Scenario-Technique,” in 17th CIRP Conference on
Intelligent Computation in Manufacturing Engineering, Gulf of Naples, 2024,
vol. 126, pp. 549–554, doi: 10.1016/j.procir.2024.08.238.'
mla: Gräßler, Iris, et al. “Handling of Uncertainties in the Design of Sustainable
Additive Manufacturing Products by Merging Design-for-X and Scenario-Technique.”
17th CIRP Conference on Intelligent Computation in Manufacturing Engineering,
vol. 126, Elsevier, 2024, pp. 549–54, doi:10.1016/j.procir.2024.08.238.
short: 'I. Gräßler, I. Mozgova, J. Pottebaum, M. Ott, P. Jung, P. Hesse, in: 17th
CIRP Conference on Intelligent Computation in Manufacturing Engineering, Elsevier,
2024, pp. 549–554.'
conference:
end_date: 2023-07-14
location: Gulf of Naples
name: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering
start_date: 2023-07-11
date_created: 2023-08-08T07:42:04Z
date_updated: 2024-11-21T10:13:30Z
department:
- _id: '152'
- _id: '741'
doi: 10.1016/j.procir.2024.08.238
intvolume: ' 126'
keyword:
- Design-for-X
- Scenario-Technique
- sustainability
- uncertainty
- Life-Cycle Engineering
- Additive Manufacturing
- Circular Economy
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
page: 549-554
project:
- _id: '519'
name: 'BIKINI: BIKINI - Bionik und KI für nachhaltige Integration von Produktentwicklung
für einen ressourceneffizienten Leichtbau'
publication: 17th CIRP Conference on Intelligent Computation in Manufacturing Engineering
publication_status: published
publisher: Elsevier
quality_controlled: '1'
series_title: Procedia CIRP
status: public
title: Handling of uncertainties in the design of sustainable Additive Manufacturing
products by merging Design-for-X and Scenario-Technique
type: conference
user_id: '405'
volume: 126
year: '2024'
...
---
_id: '57445'
abstract:
- lang: eng
text: Knowledge management is essential for successful disaster management. This
paper conducts a Systematic Literature Review at the intersection of the knowledge
management field and disaster management and examines the available body of literature.
Fire departments are chosen as the focus group as they are the most prevalent
emergency services. There are many publications that deal with knowledge management
during the response phase of an emergency. Often, the literature focuses on the
application of knowledge management in large-scale disasters to link the various
organizations on-scene. What is missing in most approaches is a prior step of
implementing and training the knowledge management system. Therefore, this literature
review seeks to provide an overview of approaches for daily routines and small-to-medium
incidents that serve as a training ground. However, literature on non-incident
phases and smaller incidents is scarce. As information technologies are developing
rapidly, there is no modern and recent description of the current use of knowledge
management solutions in this area.
author:
- first_name: Andreas Maximilian
full_name: Schultz, Andreas Maximilian
id: '40599'
last_name: Schultz
- first_name: Fabian
full_name: Dotzki, Fabian
last_name: Dotzki
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Schultz AM, Dotzki F, Mozgova I. Knowledge Management in Civil Protection
at the Example of Fire Brigades. In: Proceedings of the 16th International
Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management.
SCITEPRESS - Science and Technology Publications; 2024. doi:10.5220/0012947700003838'
apa: Schultz, A. M., Dotzki, F., & Mozgova, I. (2024). Knowledge Management
in Civil Protection at the Example of Fire Brigades. Proceedings of the 16th
International Joint Conference on Knowledge Discovery, Knowledge Engineering and
Knowledge Management. International Joint Conference on Knowledge Discovery,
Knowledge Engineering and Knowledge Management, Porto, Portugal. https://doi.org/10.5220/0012947700003838
bibtex: '@inproceedings{Schultz_Dotzki_Mozgova_2024, title={Knowledge Management
in Civil Protection at the Example of Fire Brigades}, DOI={10.5220/0012947700003838},
booktitle={Proceedings of the 16th International Joint Conference on Knowledge
Discovery, Knowledge Engineering and Knowledge Management}, publisher={SCITEPRESS
- Science and Technology Publications}, author={Schultz, Andreas Maximilian and
Dotzki, Fabian and Mozgova, Iryna}, year={2024} }'
chicago: Schultz, Andreas Maximilian, Fabian Dotzki, and Iryna Mozgova. “Knowledge
Management in Civil Protection at the Example of Fire Brigades.” In Proceedings
of the 16th International Joint Conference on Knowledge Discovery, Knowledge Engineering
and Knowledge Management. SCITEPRESS - Science and Technology Publications,
2024. https://doi.org/10.5220/0012947700003838.
ieee: 'A. M. Schultz, F. Dotzki, and I. Mozgova, “Knowledge Management in Civil
Protection at the Example of Fire Brigades,” presented at the International Joint
Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management,
Porto, Portugal, 2024, doi: 10.5220/0012947700003838.'
mla: Schultz, Andreas Maximilian, et al. “Knowledge Management in Civil Protection
at the Example of Fire Brigades.” Proceedings of the 16th International Joint
Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management,
SCITEPRESS - Science and Technology Publications, 2024, doi:10.5220/0012947700003838.
short: 'A.M. Schultz, F. Dotzki, I. Mozgova, in: Proceedings of the 16th International
Joint Conference on Knowledge Discovery, Knowledge Engineering and Knowledge Management,
SCITEPRESS - Science and Technology Publications, 2024.'
conference:
end_date: 2024-11-19
location: Porto, Portugal
name: International Joint Conference on Knowledge Discovery, Knowledge Engineering
and Knowledge Management
start_date: 2024-11-17
date_created: 2024-11-27T07:50:07Z
date_updated: 2024-11-27T07:53:24Z
department:
- _id: '741'
doi: 10.5220/0012947700003838
keyword:
- Knowledge Management
- Civil Protection
- Systematic Literature Review
- Fire Brigade
language:
- iso: eng
main_file_link:
- url: https://www.scitepress.org/Link.aspx?doi=10.5220/0012947700003838
publication: Proceedings of the 16th International Joint Conference on Knowledge Discovery,
Knowledge Engineering and Knowledge Management
publication_status: published
publisher: SCITEPRESS - Science and Technology Publications
status: public
title: Knowledge Management in Civil Protection at the Example of Fire Brigades
type: conference
user_id: '40599'
year: '2024'
...
---
_id: '57182'
abstract:
- lang: eng
text: 'Generative design suggestions and topology optimizations can help to reduce
iterative process loops between calculation and design departments during product
development processes. However, precise topology optimizations are computationally
intensive, while generative designs benefit from swift suggestions to address
design problems efficiently. Using artificial neural networks (ANN) can address
this contrast of pre-defined aims by predicting topology-optimized designs, thereby
combining both advantageous features. However, a challenge in Mass Customization
is, that ANN are usually trained on specific geometries, making transfer to other
applications impractical or requiring the creation of new datasets, which is economically
unfeasible. Authors have already demonstrated a solution in other publications:
dividing a geometry into geometric primitives like cuboids to perform abstraction.
An ANN can then be trained to recognize optimized cuboids, which can be assembled
back into a complete geometry, comparable to the finite element methods, which
divide geometries of parts in finite elements enable mechanical property calculation.
This publication aims to illustrate the steps of the approach in which the complete
geometry of a part is segmented into these primitives, and the benefits obtained.
Various methods will be explored, including automated workflows on modern low-code
platforms, to enable generalized use.'
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Niclas
full_name: Meihöfener, Niclas
id: '38611'
last_name: Meihöfener
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Ott M, Meihöfener N, Mozgova I. An approach to use generic data sets for neural
networks in product designs through geometric abstraction via primitives. In:
Anisic Z, Forza C, eds. Proceedings of the 11. Conference on Mass Customization
and Personalization (MCP). Faculty of Technical Science, Department of Industrial
Engineering and Management ; 2024.'
apa: Ott, M., Meihöfener, N., & Mozgova, I. (2024). An approach to use generic
data sets for neural networks in product designs through geometric abstraction
via primitives. In Z. Anisic & C. Forza (Eds.), Proceedings of the 11.
Conference on Mass Customization and Personalization (MCP). Faculty of Technical
Science, Department of Industrial Engineering and Management .
bibtex: '@inproceedings{Ott_Meihöfener_Mozgova_2024, place={Novi Sad, Serbia}, title={An
approach to use generic data sets for neural networks in product designs through
geometric abstraction via primitives}, booktitle={Proceedings of the 11. Conference
on Mass Customization and Personalization (MCP)}, publisher={Faculty of Technical
Science, Department of Industrial Engineering and Management }, author={Ott, Manuel
and Meihöfener, Niclas and Mozgova, Iryna}, editor={Anisic, Zoran and Forza,
Cipriano}, year={2024} }'
chicago: 'Ott, Manuel, Niclas Meihöfener, and Iryna Mozgova. “An Approach to Use
Generic Data Sets for Neural Networks in Product Designs through Geometric Abstraction
via Primitives.” In Proceedings of the 11. Conference on Mass Customization
and Personalization (MCP), edited by Zoran Anisic and Cipriano Forza. Novi
Sad, Serbia: Faculty of Technical Science, Department of Industrial Engineering
and Management , 2024.'
ieee: M. Ott, N. Meihöfener, and I. Mozgova, “An approach to use generic data sets
for neural networks in product designs through geometric abstraction via primitives,”
in Proceedings of the 11. Conference on Mass Customization and Personalization
(MCP), Novi Sad, Serbia, 2024.
mla: Ott, Manuel, et al. “An Approach to Use Generic Data Sets for Neural Networks
in Product Designs through Geometric Abstraction via Primitives.” Proceedings
of the 11. Conference on Mass Customization and Personalization (MCP), edited
by Zoran Anisic and Cipriano Forza, Faculty of Technical Science, Department
of Industrial Engineering and Management , 2024.
short: 'M. Ott, N. Meihöfener, I. Mozgova, in: Z. Anisic, C. Forza (Eds.), Proceedings
of the 11. Conference on Mass Customization and Personalization (MCP), Faculty
of Technical Science, Department of Industrial Engineering and Management , Novi
Sad, Serbia, 2024.'
conference:
end_date: 2024-09-27
location: Novi Sad, Serbia
name: 11. Conference on Mass Customization and Personalization (MCP)
start_date: 2024-09-24
date_created: 2024-11-18T10:20:34Z
date_updated: 2024-11-28T06:45:13Z
department:
- _id: '741'
- _id: '144'
editor:
- first_name: 'Zoran '
full_name: 'Anisic, Zoran '
last_name: Anisic
- first_name: Cipriano
full_name: Forza, Cipriano
last_name: Forza
language:
- iso: eng
place: Novi Sad, Serbia
publication: Proceedings of the 11. Conference on Mass Customization and Personalization
(MCP)
publication_identifier:
isbn:
- 978-86-6022-686-2
publication_status: published
publisher: 'Faculty of Technical Science, Department of Industrial Engineering and
Management '
status: public
title: An approach to use generic data sets for neural networks in product designs
through geometric abstraction via primitives
type: conference
user_id: '44204'
year: '2024'
...
---
_id: '54301'
author:
- first_name: Andreas Maximilian
full_name: Schultz, Andreas Maximilian
id: '40599'
last_name: Schultz
- first_name: Fabian
full_name: Dotzki, Fabian
last_name: Dotzki
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Schultz AM, Dotzki F, Mozgova I. State of Knowledge Management among German
firefighters. In: Penkert B, Hellingrath B, Rode M, et al., eds. Proceedings
of the 21st ISCRAM Conference. ; 2024. doi:https://doi.org/10.59297/ndd24w94'
apa: Schultz, A. M., Dotzki, F., & Mozgova, I. (2024). State of Knowledge Management
among German firefighters. In B. Penkert, B. Hellingrath, M. Rode, A. Widera,
M. Middelhoff, K. Boersma, & M. Kalthöner (Eds.), Proceedings of the 21st
ISCRAM Conference. https://doi.org/10.59297/ndd24w94
bibtex: '@inproceedings{Schultz_Dotzki_Mozgova_2024, title={State of Knowledge Management
among German firefighters}, DOI={https://doi.org/10.59297/ndd24w94},
booktitle={Proceedings of the 21st ISCRAM Conference}, author={Schultz, Andreas
Maximilian and Dotzki, Fabian and Mozgova, Iryna}, editor={Penkert, Berthold and
Hellingrath, Bernd and Rode, Monika and Widera, Adam and Middelhoff, Michael and
Boersma, Kees and Kalthöner, Matthias}, year={2024} }'
chicago: Schultz, Andreas Maximilian, Fabian Dotzki, and Iryna Mozgova. “State of
Knowledge Management among German Firefighters.” In Proceedings of the 21st
ISCRAM Conference, edited by Berthold Penkert, Bernd Hellingrath, Monika Rode,
Adam Widera, Michael Middelhoff, Kees Boersma, and Matthias Kalthöner, 2024. https://doi.org/10.59297/ndd24w94.
ieee: 'A. M. Schultz, F. Dotzki, and I. Mozgova, “State of Knowledge Management
among German firefighters,” in Proceedings of the 21st ISCRAM Conference,
Münster, 2024, doi: https://doi.org/10.59297/ndd24w94.'
mla: Schultz, Andreas Maximilian, et al. “State of Knowledge Management among German
Firefighters.” Proceedings of the 21st ISCRAM Conference, edited by Berthold
Penkert et al., 2024, doi:https://doi.org/10.59297/ndd24w94.
short: 'A.M. Schultz, F. Dotzki, I. Mozgova, in: B. Penkert, B. Hellingrath, M.
Rode, A. Widera, M. Middelhoff, K. Boersma, M. Kalthöner (Eds.), Proceedings of
the 21st ISCRAM Conference, 2024.'
conference:
end_date: 29.5.2024
location: Münster
name: 21st ISCRAM Conference
start_date: 25.5.2024
date_created: 2024-05-16T06:49:09Z
date_updated: 2024-11-28T07:00:25Z
ddc:
- '350'
department:
- _id: '741'
doi: https://doi.org/10.59297/ndd24w94
editor:
- first_name: Berthold
full_name: Penkert, Berthold
last_name: Penkert
- first_name: Bernd
full_name: Hellingrath, Bernd
last_name: Hellingrath
- first_name: Monika
full_name: Rode, Monika
last_name: Rode
- first_name: Adam
full_name: Widera, Adam
last_name: Widera
- first_name: Michael
full_name: Middelhoff, Michael
last_name: Middelhoff
- first_name: Kees
full_name: Boersma, Kees
last_name: Boersma
- first_name: Matthias
full_name: Kalthöner, Matthias
last_name: Kalthöner
file:
- access_level: closed
content_type: application/pdf
creator: schultza
date_created: 2024-05-16T06:46:48Z
date_updated: 2024-05-16T06:46:48Z
file_id: '54302'
file_name: State of Knowledge Management among German firefighters - Schultz.pdf
file_size: 366337
relation: main_file
success: 1
file_date_updated: 2024-05-16T06:46:48Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://ojs.iscram.org/index.php/Proceedings/article/view/64/28
oa: '1'
publication: Proceedings of the 21st ISCRAM Conference
publication_status: published
status: public
title: State of Knowledge Management among German firefighters
type: conference
user_id: '40599'
year: '2024'
...
---
_id: '57540'
abstract:
- lang: eng
text: AbstractRolling processes of conventional
cast Al-Li alloys quickly reach their limits due to relatively poor material formability.
This can be overcome by using twin-roll casting to produce thin sheets. Further
thermomechanical treatment, including hot or cold rolling, and heat treatment
can adjust the mechanical properties of twin-roll cast Al-Li sheets. The whole
manufacturing chain requires detailed knowledge of the precipitation and dissolution
behavior during heating, soaking and cooling, to purposefully select any process
parameters. This study shows the process chain of a twin-roll cast Al–Cu–Li alloy
achieving a hardness of around 180 HV1 by adapting the heat treatment parameters
for homogenisation, hot rolling and age hardening. Both hardness and microstructure
evolution are visualised along the process chain.
author:
- first_name: Sina
full_name: Mallow, Sina
last_name: Mallow
- first_name: Jette
full_name: Broer, Jette
last_name: Broer
- first_name: Benjamin
full_name: Milkereit, Benjamin
last_name: Milkereit
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Kai-Uwe
full_name: Garthe, Kai-Uwe
id: '11199'
last_name: Garthe
orcid: 0000-0003-0741-3812
- first_name: Dennis
full_name: Milaege, Dennis
id: '35461'
last_name: Milaege
- first_name: Viktoriya
full_name: Boyko, Viktoriya
last_name: Boyko
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Olaf
full_name: Kessler, Olaf
last_name: Kessler
citation:
ama: Mallow S, Broer J, Milkereit B, et al. Process chain of a twin-roll cast aluminium-copper-lithium
alloy. Production Engineering. Published online 2024. doi:10.1007/s11740-024-01322-x
apa: Mallow, S., Broer, J., Milkereit, B., Grydin, O., Hoyer, K.-P., Garthe, K.-U.,
Milaege, D., Boyko, V., Schaper, M., & Kessler, O. (2024). Process chain of
a twin-roll cast aluminium-copper-lithium alloy. Production Engineering.
https://doi.org/10.1007/s11740-024-01322-x
bibtex: '@article{Mallow_Broer_Milkereit_Grydin_Hoyer_Garthe_Milaege_Boyko_Schaper_Kessler_2024,
title={Process chain of a twin-roll cast aluminium-copper-lithium alloy}, DOI={10.1007/s11740-024-01322-x},
journal={Production Engineering}, publisher={Springer Science and Business Media
LLC}, author={Mallow, Sina and Broer, Jette and Milkereit, Benjamin and Grydin,
Olexandr and Hoyer, Kay-Peter and Garthe, Kai-Uwe and Milaege, Dennis and Boyko,
Viktoriya and Schaper, Mirko and Kessler, Olaf}, year={2024} }'
chicago: Mallow, Sina, Jette Broer, Benjamin Milkereit, Olexandr Grydin, Kay-Peter
Hoyer, Kai-Uwe Garthe, Dennis Milaege, Viktoriya Boyko, Mirko Schaper, and Olaf
Kessler. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium Alloy.” Production
Engineering, 2024. https://doi.org/10.1007/s11740-024-01322-x.
ieee: 'S. Mallow et al., “Process chain of a twin-roll cast aluminium-copper-lithium
alloy,” Production Engineering, 2024, doi: 10.1007/s11740-024-01322-x.'
mla: Mallow, Sina, et al. “Process Chain of a Twin-Roll Cast Aluminium-Copper-Lithium
Alloy.” Production Engineering, Springer Science and Business Media LLC,
2024, doi:10.1007/s11740-024-01322-x.
short: S. Mallow, J. Broer, B. Milkereit, O. Grydin, K.-P. Hoyer, K.-U. Garthe,
D. Milaege, V. Boyko, M. Schaper, O. Kessler, Production Engineering (2024).
date_created: 2024-12-02T13:43:15Z
date_updated: 2024-12-02T13:46:39Z
department:
- _id: '9'
- _id: '158'
- _id: '321'
doi: 10.1007/s11740-024-01322-x
language:
- iso: eng
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Process chain of a twin-roll cast aluminium-copper-lithium alloy
type: journal_article
user_id: '48411'
year: '2024'
...
---
_id: '57575'
article_type: original
author:
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Beule F, Teutenberg D, Meschut G. Analysis of the anisotropic mechanical properties
of structural adhesive joints with curing-induced pre-deformations. Journal
of Adhesion Science and Technology. Published online 2024:1-20. doi:10.1080/01694243.2024.2427799
apa: Beule, F., Teutenberg, D., & Meschut, G. (2024). Analysis of the anisotropic
mechanical properties of structural adhesive joints with curing-induced pre-deformations.
Journal of Adhesion Science and Technology, 1–20. https://doi.org/10.1080/01694243.2024.2427799
bibtex: '@article{Beule_Teutenberg_Meschut_2024, title={Analysis of the anisotropic
mechanical properties of structural adhesive joints with curing-induced pre-deformations},
DOI={10.1080/01694243.2024.2427799},
journal={Journal of Adhesion Science and Technology}, publisher={Informa UK Limited},
author={Beule, Felix and Teutenberg, Dominik and Meschut, Gerson}, year={2024},
pages={1–20} }'
chicago: Beule, Felix, Dominik Teutenberg, and Gerson Meschut. “Analysis of the
Anisotropic Mechanical Properties of Structural Adhesive Joints with Curing-Induced
Pre-Deformations.” Journal of Adhesion Science and Technology, 2024, 1–20.
https://doi.org/10.1080/01694243.2024.2427799.
ieee: 'F. Beule, D. Teutenberg, and G. Meschut, “Analysis of the anisotropic mechanical
properties of structural adhesive joints with curing-induced pre-deformations,”
Journal of Adhesion Science and Technology, pp. 1–20, 2024, doi: 10.1080/01694243.2024.2427799.'
mla: Beule, Felix, et al. “Analysis of the Anisotropic Mechanical Properties of
Structural Adhesive Joints with Curing-Induced Pre-Deformations.” Journal of
Adhesion Science and Technology, Informa UK Limited, 2024, pp. 1–20, doi:10.1080/01694243.2024.2427799.
short: F. Beule, D. Teutenberg, G. Meschut, Journal of Adhesion Science and Technology
(2024) 1–20.
date_created: 2024-12-04T12:56:42Z
date_updated: 2024-12-04T12:59:08Z
department:
- _id: '157'
doi: 10.1080/01694243.2024.2427799
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.tandfonline.com/doi/full/10.1080/01694243.2024.2427799
oa: '1'
page: 1-20
publication: Journal of Adhesion Science and Technology
publication_identifier:
issn:
- 0169-4243
- 1568-5616
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Analysis of the anisotropic mechanical properties of structural adhesive joints
with curing-induced pre-deformations
type: journal_article
user_id: '66192'
year: '2024'
...
---
_id: '57584'
abstract:
- lang: eng
text: There are numerous initiatives and lighthouse projects around Gaia-X
to create the basics of open, trustworthy data ecosystems. One of the challenges
in building these data ecosystems is to convince everyone involved of the advantages
of multilateral data sharing. A prerequisite is also a common understanding of
the rights of use and access to the data. Data sovereignty means that the data
provider decides which data with which usage and access rights he wants to make
accessible to which user group. Standardised digital representations by, for instance,
the Asset Administration Shell (AAS enable creation of such data ecosystems, interlinking
the physical and digital space. In the paper at hand, a conceptual approach named
Decide4Eco is presented with the aim to enable systematic and flexible decision-making
support for product planning and development concerning the sustainability of
a product and the entire value chain. Methods of sustainability assessment are
expanded to include predictive AI-based effects analyses.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Martin
full_name: Holland, Martin
last_name: Holland
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
- first_name: Thomas
full_name: Dickopf, Thomas
last_name: Dickopf
- first_name: Josip
full_name: Stjepandić, Josip
last_name: Stjepandić
citation:
ama: 'Gräßler I, Pottebaum J, Holland M, Wiechel D, Dickopf T, Stjepandić J. Leveraging
Data Ecosystems in Model-Based Systems Engineering for Ecological, Circular Added
Value. In: Stjepandic J, ed. Proceedings of the 31st ISTE International Conference
on Transdisciplinary Engineering. Vol 60. Advances in Transdisciplinary Engineering.
IOS Press; 2024:175-184. doi:10.3233/atde240858'
apa: Gräßler, I., Pottebaum, J., Holland, M., Wiechel, D., Dickopf, T., & Stjepandić,
J. (2024). Leveraging Data Ecosystems in Model-Based Systems Engineering for Ecological,
Circular Added Value. In J. Stjepandic (Ed.), Proceedings of the 31st ISTE
International Conference on Transdisciplinary Engineering (Vol. 60, pp. 175–184).
IOS Press. https://doi.org/10.3233/atde240858
bibtex: '@inproceedings{Gräßler_Pottebaum_Holland_Wiechel_Dickopf_Stjepandić_2024,
series={Advances in Transdisciplinary Engineering}, title={Leveraging Data Ecosystems
in Model-Based Systems Engineering for Ecological, Circular Added Value}, volume={60},
DOI={10.3233/atde240858}, booktitle={Proceedings
of the 31st ISTE International Conference on Transdisciplinary Engineering}, publisher={IOS
Press}, author={Gräßler, Iris and Pottebaum, Jens and Holland, Martin and Wiechel,
Dominik and Dickopf, Thomas and Stjepandić, Josip}, editor={Stjepandic, Josip},
year={2024}, pages={175–184}, collection={Advances in Transdisciplinary Engineering}
}'
chicago: Gräßler, Iris, Jens Pottebaum, Martin Holland, Dominik Wiechel, Thomas
Dickopf, and Josip Stjepandić. “Leveraging Data Ecosystems in Model-Based Systems
Engineering for Ecological, Circular Added Value.” In Proceedings of the 31st
ISTE International Conference on Transdisciplinary Engineering, edited by
Josip Stjepandic, 60:175–84. Advances in Transdisciplinary Engineering. IOS Press,
2024. https://doi.org/10.3233/atde240858.
ieee: 'I. Gräßler, J. Pottebaum, M. Holland, D. Wiechel, T. Dickopf, and J. Stjepandić,
“Leveraging Data Ecosystems in Model-Based Systems Engineering for Ecological,
Circular Added Value,” in Proceedings of the 31st ISTE International Conference
on Transdisciplinary Engineering, London, 2024, vol. 60, pp. 175–184, doi:
10.3233/atde240858.'
mla: Gräßler, Iris, et al. “Leveraging Data Ecosystems in Model-Based Systems Engineering
for Ecological, Circular Added Value.” Proceedings of the 31st ISTE International
Conference on Transdisciplinary Engineering, edited by Josip Stjepandic, vol.
60, IOS Press, 2024, pp. 175–84, doi:10.3233/atde240858.
short: 'I. Gräßler, J. Pottebaum, M. Holland, D. Wiechel, T. Dickopf, J. Stjepandić,
in: J. Stjepandic (Ed.), Proceedings of the 31st ISTE International Conference
on Transdisciplinary Engineering, IOS Press, 2024, pp. 175–184.'
conference:
end_date: 2024-07-11
location: London
name: 31st ISTE International Conference on Transdisciplinary Engineering
start_date: 2024-07-09
date_created: 2024-12-05T07:10:57Z
date_updated: 2024-12-05T07:17:50Z
department:
- _id: '152'
doi: 10.3233/atde240858
editor:
- first_name: Josip
full_name: Stjepandic, Josip
last_name: Stjepandic
has_accepted_license: '1'
intvolume: ' 60'
language:
- iso: eng
page: 175-184
publication: Proceedings of the 31st ISTE International Conference on Transdisciplinary
Engineering
publication_identifier:
isbn:
- '9781643685502'
issn:
- 2352-751X
- 2352-7528
publication_status: published
publisher: IOS Press
quality_controlled: '1'
series_title: Advances in Transdisciplinary Engineering
status: public
title: Leveraging Data Ecosystems in Model-Based Systems Engineering for Ecological,
Circular Added Value
type: conference
user_id: '405'
volume: 60
year: '2024'
...
---
_id: '57477'
author:
- first_name: Franz
full_name: Haas, Franz
last_name: Haas
- first_name: 'Raphael '
full_name: 'Tiefnig, Raphael '
last_name: Tiefnig
- first_name: Marcel Patrick Klaus
full_name: Braun, Marcel Patrick Klaus
id: '84156'
last_name: Braun
- first_name: 'Michael '
full_name: 'Taschauer, Michael '
last_name: Taschauer
- first_name: 'Stephan '
full_name: 'Steinacker, Stephan '
last_name: Steinacker
citation:
ama: 'Haas F, Tiefnig R, Braun MPK, Taschauer M, Steinacker S. Process Development
and Risk Assessment for Processing Magnesium Alloys using LPBF Technology. In:
Metal Additive Manufacturing Conference, MAMC 2024. ; 2024.'
apa: Haas, F., Tiefnig, R., Braun, M. P. K., Taschauer, M., & Steinacker, S.
(2024). Process Development and Risk Assessment for Processing Magnesium Alloys
using LPBF Technology. Metal Additive Manufacturing Conference, MAMC 2024.
Metal Additive Manufacturing Conference, MAMC 2024, Aachen.
bibtex: '@inproceedings{Haas_Tiefnig_Braun_Taschauer_Steinacker_2024, title={Process
Development and Risk Assessment for Processing Magnesium Alloys using LPBF Technology},
booktitle={Metal Additive Manufacturing Conference, MAMC 2024}, author={Haas,
Franz and Tiefnig, Raphael and Braun, Marcel Patrick Klaus and Taschauer, Michael and
Steinacker, Stephan }, year={2024} }'
chicago: Haas, Franz, Raphael Tiefnig, Marcel Patrick Klaus Braun, Michael Taschauer,
and Stephan Steinacker. “Process Development and Risk Assessment for Processing
Magnesium Alloys Using LPBF Technology.” In Metal Additive Manufacturing Conference,
MAMC 2024, 2024.
ieee: F. Haas, R. Tiefnig, M. P. K. Braun, M. Taschauer, and S. Steinacker, “Process
Development and Risk Assessment for Processing Magnesium Alloys using LPBF Technology,”
presented at the Metal Additive Manufacturing Conference, MAMC 2024, Aachen, 2024.
mla: Haas, Franz, et al. “Process Development and Risk Assessment for Processing
Magnesium Alloys Using LPBF Technology.” Metal Additive Manufacturing Conference,
MAMC 2024, 2024.
short: 'F. Haas, R. Tiefnig, M.P.K. Braun, M. Taschauer, S. Steinacker, in: Metal
Additive Manufacturing Conference, MAMC 2024, 2024.'
conference:
end_date: 204-09-19
location: Aachen
name: Metal Additive Manufacturing Conference, MAMC 2024
start_date: 2024-09-17
date_created: 2024-11-28T11:48:04Z
date_updated: 2024-12-10T07:37:24Z
department:
- _id: '158'
language:
- iso: eng
publication: Metal Additive Manufacturing Conference, MAMC 2024
status: public
title: Process Development and Risk Assessment for Processing Magnesium Alloys using
LPBF Technology
type: conference
user_id: '84156'
year: '2024'
...
---
_id: '52678'
author:
- first_name: X.
full_name: Yang, X.
last_name: Yang
citation:
ama: Yang X. Eine Methode Zur Unterstützung von Entscheidungen Bei Der Entwicklung
Modularer Leichtbauprodukte . Vol Band 416.; 2024.
apa: 'Yang, X. (2024). Eine Methode zur Unterstützung von Entscheidungen bei
der Entwicklung modularer Leichtbauprodukte : Vol. Band 416.'
bibtex: '@book{Yang_2024, series={HNI-Verlagsschriftreihe}, title={Eine Methode
zur Unterstützung von Entscheidungen bei der Entwicklung modularer Leichtbauprodukte
}, volume={Band 416}, author={Yang, X.}, year={2024}, collection={HNI-Verlagsschriftreihe}
}'
chicago: Yang, X. Eine Methode Zur Unterstützung von Entscheidungen Bei Der Entwicklung
Modularer Leichtbauprodukte . Vol. Band 416. HNI-Verlagsschriftreihe, 2024.
ieee: X. Yang, Eine Methode zur Unterstützung von Entscheidungen bei der Entwicklung
modularer Leichtbauprodukte , vol. Band 416. 2024.
mla: Yang, X. Eine Methode Zur Unterstützung von Entscheidungen Bei Der Entwicklung
Modularer Leichtbauprodukte . 2024.
short: X. Yang, Eine Methode Zur Unterstützung von Entscheidungen Bei Der Entwicklung
Modularer Leichtbauprodukte , 2024.
date_created: 2024-03-20T11:17:55Z
date_updated: 2024-12-11T06:06:00Z
department:
- _id: '26'
- _id: '152'
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-947647-35-4
series_title: HNI-Verlagsschriftreihe
status: public
title: 'Eine Methode zur Unterstützung von Entscheidungen bei der Entwicklung modularer
Leichtbauprodukte '
type: dissertation
user_id: '1112'
volume: Band 416
year: '2024'
...
---
_id: '57897'
author:
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Andreas
full_name: Elsner, Andreas
id: '16124'
last_name: Elsner
- first_name: Tina
full_name: Kasper, Tina
id: '94562'
last_name: Kasper
orcid: '0000-0003-3993-5316 '
- first_name: Daniel
full_name: Schumacher, Daniel
last_name: Schumacher
- first_name: 'Jadran '
full_name: 'Vrabec, Jadran '
last_name: Vrabec
- first_name: 'Heike '
full_name: 'Hölscher, Heike '
last_name: Hölscher
- first_name: 'Marcus '
full_name: 'Bluemel, Marcus '
last_name: Bluemel
- first_name: Wenke
full_name: Wollny, Wenke
last_name: Wollny
- first_name: Wolfgang
full_name: Becker, Wolfgang
last_name: Becker
- first_name: 'Nicola '
full_name: 'Brzoska-Steinhaus, Nicola '
last_name: Brzoska-Steinhaus
citation:
ama: 'Paul A, Elsner A, Kasper T, et al. Alterungsbedingter Anstieg der Energieaufnahme
von Haushaltskältegeräten. In: ; 2024.'
apa: Paul, A., Elsner, A., Kasper, T., Schumacher, D., Vrabec, J., Hölscher, H.,
Bluemel, M., Wollny, W., Becker, W., & Brzoska-Steinhaus, N. (2024). Alterungsbedingter
Anstieg der Energieaufnahme von Haushaltskältegeräten. Thermodynamik-Kolloquium,
September.
bibtex: '@inproceedings{Paul_Elsner_Kasper_Schumacher_Vrabec_Hölscher_Bluemel_Wollny_Becker_Brzoska-Steinhaus_2024,
title={Alterungsbedingter Anstieg der Energieaufnahme von Haushaltskältegeräten},
author={Paul, Andreas and Elsner, Andreas and Kasper, Tina and Schumacher, Daniel
and Vrabec, Jadran and Hölscher, Heike and Bluemel, Marcus and Wollny, Wenke
and Becker, Wolfgang and Brzoska-Steinhaus, Nicola }, year={2024} }'
chicago: Paul, Andreas, Andreas Elsner, Tina Kasper, Daniel Schumacher, Jadran Vrabec,
Heike Hölscher, Marcus Bluemel, Wenke Wollny, Wolfgang Becker, and Nicola Brzoska-Steinhaus.
“Alterungsbedingter Anstieg der Energieaufnahme von Haushaltskältegeräten,” 2024.
ieee: A. Paul et al., “Alterungsbedingter Anstieg der Energieaufnahme von
Haushaltskältegeräten,” presented at the Thermodynamik-Kolloquium, September,
2024.
mla: Paul, Andreas, et al. Alterungsbedingter Anstieg der Energieaufnahme von
Haushaltskältegeräten. 2024.
short: 'A. Paul, A. Elsner, T. Kasper, D. Schumacher, J. Vrabec, H. Hölscher, M.
Bluemel, W. Wollny, W. Becker, N. Brzoska-Steinhaus, in: 2024.'
conference:
end_date: 2024-09-27
location: September
name: Thermodynamik-Kolloquium
start_date: 2024-09-25
date_created: 2025-01-02T11:39:12Z
date_updated: 2025-01-02T11:50:38Z
department:
- _id: '728'
- _id: '155'
language:
- iso: ger
status: public
title: Alterungsbedingter Anstieg der Energieaufnahme von Haushaltskältegeräten
type: conference_abstract
user_id: '7828'
year: '2024'
...