---
_id: '46764'
abstract:
- lang: eng
text: "Polymer composites represent the industry standard in injection molding for
the production \r\nof plastic components with increased requirements in terms
of heat resistance and stiffness. In the \r\nfield of laser sintering (LS), these
materials are less common so far. In order to extend the available \r\nmaterial
variety for the LS process, new ceramic-filled Polyamide 613 powders are investigated\r\nwithin
the scope of this work. Here, the resulting properties from two different powder
production \r\nmethods are compared. One filled powder is produced by dry blending
and the other powder with \r\nthe same filler and filling ratio is produced by
encapsulating the filler particles inside the polymer \r\nparticles within the
dissolution-precipitation process. It was found that encapsulating the filler
\r\nparticles can provide certain benefits for the processability, for example
an improved powder \r\nflowability or better filler dispersion. However, encapsulating
the filler also alters the thermal \r\nproperties of the precipitated powder."
author:
- first_name: Ivo
full_name: Kletetzka, Ivo
id: '50769'
last_name: Kletetzka
- first_name: Fabian
full_name: Neitzel, Fabian
last_name: Neitzel
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Kletetzka I, Neitzel F, Schmid H-J. Assessing the Impact of the Powder Production
Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In: Beaman
J, ed. Proceedings of the 34th Annual International Solid Freeform Fabrication
Symposium. Vol 34. Laboratory for Freeform Fabrication and University of Texas;
2023.'
apa: Kletetzka, I., Neitzel, F., & Schmid, H.-J. (2023). Assessing the Impact
of the Powder Production Method on Ceramic-filled Polyamide Composites made by
Laser Sintering. In J. Beaman (Ed.), Proceedings of the 34th Annual International
Solid Freeform Fabrication Symposium (Vol. 34). Laboratory for Freeform Fabrication
and University of Texas.
bibtex: '@inproceedings{Kletetzka_Neitzel_Schmid_2023, place={Austin}, title={Assessing
the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites
made by Laser Sintering}, volume={34}, booktitle={Proceedings of the 34th Annual
International Solid Freeform Fabrication Symposium}, publisher={Laboratory for
Freeform Fabrication and University of Texas}, author={Kletetzka, Ivo and Neitzel,
Fabian and Schmid, Hans-Joachim}, editor={Beaman, Joseph}, year={2023} }'
chicago: 'Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the
Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites
Made by Laser Sintering.” In Proceedings of the 34th Annual International Solid
Freeform Fabrication Symposium, edited by Joseph Beaman, Vol. 34. Austin:
Laboratory for Freeform Fabrication and University of Texas, 2023.'
ieee: I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder
Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,”
in Proceedings of the 34th Annual International Solid Freeform Fabrication
Symposium, Austin, 2023, vol. 34.
mla: Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method
on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” Proceedings
of the 34th Annual International Solid Freeform Fabrication Symposium, edited
by Joseph Beaman, vol. 34, Laboratory for Freeform Fabrication and University
of Texas, 2023.
short: 'I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings
of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory
for Freeform Fabrication and University of Texas, Austin, 2023.'
conference:
end_date: 2023-08-16
location: Austin
name: 34th Annual International Solid Freeform Fabrication Symposium
start_date: 2023-08-13
date_created: 2023-09-01T12:30:25Z
date_updated: 2023-11-02T16:49:49Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
- _id: '9'
editor:
- first_name: Joseph
full_name: Beaman, Joseph
last_name: Beaman
intvolume: ' 34'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.sffsymposium.org/
oa: '1'
place: Austin
publication: Proceedings of the 34th Annual International Solid Freeform Fabrication
Symposium
publication_status: published
publisher: Laboratory for Freeform Fabrication and University of Texas
quality_controlled: '1'
status: public
title: Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide
Composites made by Laser Sintering
type: conference
user_id: '50769'
volume: 34
year: '2023'
...
---
_id: '44316'
author:
- first_name: Julian
full_name: Rozo Vasquez, Julian
last_name: Rozo Vasquez
- first_name: Bahman
full_name: Arian, Bahman
id: '36287'
last_name: Arian
- first_name: Lukas
full_name: Kersting, Lukas
last_name: Kersting
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Rozo Vasquez J, Arian B, Kersting L, Walther F, Homberg W, Trächtler A. Softsensor
model of phase transformation during flow forming of metastable austenitic steel
AISI 304L. In: ; 2023.'
apa: Rozo Vasquez, J., Arian, B., Kersting, L., Walther, F., Homberg, W., &
Trächtler, A. (2023). Softsensor model of phase transformation during flow
forming of metastable austenitic steel AISI 304L. The 14th International Conference
on Numerical Methods in Industrial Forming Processes (Numiform 2023), Krakau.
bibtex: '@inproceedings{Rozo Vasquez_Arian_Kersting_Walther_Homberg_Trächtler_2023,
title={Softsensor model of phase transformation during flow forming of metastable
austenitic steel AISI 304L}, author={Rozo Vasquez, Julian and Arian, Bahman and
Kersting, Lukas and Walther, Frank and Homberg, Werner and Trächtler, Ansgar},
year={2023} }'
chicago: Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner
Homberg, and Ansgar Trächtler. “Softsensor Model of Phase Transformation during
Flow Forming of Metastable Austenitic Steel AISI 304L,” 2023.
ieee: J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, and A. Trächtler,
“Softsensor model of phase transformation during flow forming of metastable austenitic
steel AISI 304L,” presented at the The 14th International Conference on Numerical
Methods in Industrial Forming Processes (Numiform 2023), Krakau, 2023.
mla: Rozo Vasquez, Julian, et al. Softsensor Model of Phase Transformation during
Flow Forming of Metastable Austenitic Steel AISI 304L. 2023.
short: 'J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, A. Trächtler,
in: 2023.'
conference:
end_date: 2023-06-29
location: Krakau
name: The 14th International Conference on Numerical Methods in Industrial Forming
Processes (Numiform 2023)
start_date: 2023-06-25
date_created: 2023-05-02T09:56:46Z
date_updated: 2023-11-07T00:01:46Z
department:
- _id: '156'
- _id: '241'
- _id: '153'
language:
- iso: eng
quality_controlled: '1'
status: public
title: Softsensor model of phase transformation during flow forming of metastable
austenitic steel AISI 304L
type: conference
user_id: '14931'
year: '2023'
...
---
_id: '48643'
author:
- first_name: Emine Fulya
full_name: Akbulut Irmak, Emine Fulya
id: '72008'
last_name: Akbulut Irmak
orcid: 0000-0002-1338-810X
- first_name: Hendrik
full_name: Hanses, Hendrik
id: '64527'
last_name: Hanses
- first_name: Ilona
full_name: Horwath, Ilona
id: '68836'
last_name: Horwath
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Akbulut Irmak EF, Hanses H, Horwath I, Tröster T. Case Study III: Challenges
of lightweight design, vehicles, and rescuers. In: Climate Protection, Resource
Efficiency, and Sustainable Engineering. transcript Verlag; 2023. doi:10.14361/9783839463772-006'
apa: 'Akbulut Irmak, E. F., Hanses, H., Horwath, I., & Tröster, T. (2023). Case
Study III: Challenges of lightweight design, vehicles, and rescuers. In Climate
Protection, Resource Efficiency, and Sustainable Engineering. transcript Verlag.
https://doi.org/10.14361/9783839463772-006'
bibtex: '@inbook{Akbulut Irmak_Hanses_Horwath_Tröster_2023, place={Bielefeld, Germany},
title={Case Study III: Challenges of lightweight design, vehicles, and rescuers},
DOI={10.14361/9783839463772-006},
booktitle={Climate Protection, Resource Efficiency, and Sustainable Engineering},
publisher={transcript Verlag}, author={Akbulut Irmak, Emine Fulya and Hanses,
Hendrik and Horwath, Ilona and Tröster, Thomas}, year={2023} }'
chicago: 'Akbulut Irmak, Emine Fulya, Hendrik Hanses, Ilona Horwath, and Thomas
Tröster. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.”
In Climate Protection, Resource Efficiency, and Sustainable Engineering.
Bielefeld, Germany: transcript Verlag, 2023. https://doi.org/10.14361/9783839463772-006.'
ieee: 'E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III:
Challenges of lightweight design, vehicles, and rescuers,” in Climate Protection,
Resource Efficiency, and Sustainable Engineering, Bielefeld, Germany: transcript
Verlag, 2023.'
mla: 'Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight
Design, Vehicles, and Rescuers.” Climate Protection, Resource Efficiency, and
Sustainable Engineering, transcript Verlag, 2023, doi:10.14361/9783839463772-006.'
short: 'E.F. Akbulut Irmak, H. Hanses, I. Horwath, T. Tröster, in: Climate Protection,
Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld,
Germany, 2023.'
date_created: 2023-11-07T11:07:19Z
date_updated: 2023-11-07T11:14:22Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.14361/9783839463772-006
language:
- iso: eng
place: Bielefeld, Germany
publication: Climate Protection, Resource Efficiency, and Sustainable Engineering
publication_identifier:
isbn:
- '9783837663778'
- '9783839463772'
issn:
- 2703-1543
- 2703-1551
publication_status: published
publisher: transcript Verlag
status: public
title: 'Case Study III: Challenges of lightweight design, vehicles, and rescuers'
type: book_chapter
user_id: '72008'
year: '2023'
...
---
_id: '48672'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Karina
full_name: Gevers, Karina
id: '83151'
last_name: Gevers
- first_name: L.
full_name: Schraa, L.
last_name: Schraa
- first_name: P.
full_name: Töws, P.
last_name: Töws
- first_name: K.
full_name: Uhlig, K.
last_name: Uhlig
- first_name: M.
full_name: Stommel, M.
last_name: Stommel
- first_name: J.
full_name: Decker, J.
last_name: Decker
citation:
ama: 'Schöppner V, Gevers K, Schraa L, et al. Evaluation of the effects of different
heating strategies on the joining partners during infrared welding of black polyamides.
In: ; 2023.'
apa: Schöppner, V., Gevers, K., Schraa, L., Töws, P., Uhlig, K., Stommel, M., &
Decker, J. (2023). Evaluation of the effects of different heating strategies
on the joining partners during infrared welding of black polyamides. 76th
Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur).
bibtex: '@inproceedings{Schöppner_Gevers_Schraa_Töws_Uhlig_Stommel_Decker_2023,
place={Singapur (Singapur)}, title={Evaluation of the effects of different heating
strategies on the joining partners during infrared welding of black polyamides},
author={Schöppner, Volker and Gevers, Karina and Schraa, L. and Töws, P. and Uhlig,
K. and Stommel, M. and Decker, J.}, year={2023} }'
chicago: Schöppner, Volker, Karina Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel,
and J. Decker. “Evaluation of the Effects of Different Heating Strategies on the
Joining Partners during Infrared Welding of Black Polyamides.” Singapur (Singapur),
2023.
ieee: V. Schöppner et al., “Evaluation of the effects of different heating
strategies on the joining partners during infrared welding of black polyamides,”
presented at the 76th Annual Assembly of the International Institute of Welding
(IIW), Singapur (Singapur), 2023.
mla: Schöppner, Volker, et al. Evaluation of the Effects of Different Heating
Strategies on the Joining Partners during Infrared Welding of Black Polyamides.
2023.
short: 'V. Schöppner, K. Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel, J. Decker,
in: Singapur (Singapur), 2023.'
conference:
location: Singapur (Singapur)
name: 76th Annual Assembly of the International Institute of Welding (IIW)
date_created: 2023-11-07T14:30:13Z
date_updated: 2023-11-07T14:30:24Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Singapur (Singapur)
status: public
title: Evaluation of the effects of different heating strategies on the joining partners
during infrared welding of black polyamides
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48671'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Karina
full_name: Gevers, Karina
id: '83151'
last_name: Gevers
- first_name: L.
full_name: Schraa, L.
last_name: Schraa
- first_name: K.
full_name: Uhlig, K.
last_name: Uhlig
- first_name: P.
full_name: Töws, P.
last_name: Töws
- first_name: J.
full_name: Decker, J.
last_name: Decker
- first_name: M.
full_name: Stommel, M.
last_name: Stommel
citation:
ama: Schöppner V, Gevers K, Schraa L, et al. Evaluation of Infrared Welded Joints
of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation. Proceedings
of the 2023 International Conference on Composite Materials. Published online
2023.
apa: Schöppner, V., Gevers, K., Schraa, L., Uhlig, K., Töws, P., Decker, J., &
Stommel, M. (2023). Evaluation of Infrared Welded Joints of Short Fiber Reinforced
Thermoplastics Using Digital Image Correlation. Proceedings of the 2023 International
Conference on Composite Materials.
bibtex: '@article{Schöppner_Gevers_Schraa_Uhlig_Töws_Decker_Stommel_2023, title={Evaluation
of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital
Image Correlation}, journal={Proceedings of the 2023 International Conference
on Composite Materials}, author={Schöppner, Volker and Gevers, Karina and Schraa,
L. and Uhlig, K. and Töws, P. and Decker, J. and Stommel, M.}, year={2023} }'
chicago: Schöppner, Volker, Karina Gevers, L. Schraa, K. Uhlig, P. Töws, J. Decker,
and M. Stommel. “Evaluation of Infrared Welded Joints of Short Fiber Reinforced
Thermoplastics Using Digital Image Correlation.” Proceedings of the 2023 International
Conference on Composite Materials, 2023.
ieee: V. Schöppner et al., “Evaluation of Infrared Welded Joints of Short
Fiber Reinforced Thermoplastics Using Digital Image Correlation,” Proceedings
of the 2023 International Conference on Composite Materials, 2023.
mla: Schöppner, Volker, et al. “Evaluation of Infrared Welded Joints of Short Fiber
Reinforced Thermoplastics Using Digital Image Correlation.” Proceedings of
the 2023 International Conference on Composite Materials, 2023.
short: V. Schöppner, K. Gevers, L. Schraa, K. Uhlig, P. Töws, J. Decker, M. Stommel,
Proceedings of the 2023 International Conference on Composite Materials (2023).
date_created: 2023-11-07T14:26:01Z
date_updated: 2023-11-07T14:26:53Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: Proceedings of the 2023 International Conference on Composite Materials
status: public
title: Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics
Using Digital Image Correlation
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48665'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Theresa
full_name: Arndt, Theresa
id: '45302'
last_name: Arndt
citation:
ama: Schöppner V, Arndt T. Entwicklung von Scale-Up-Regeln für das quasisimultane
Laserdurchstrahlschweißen (QSS) von Thermoplasten. Joining Plastics. 2023;(17):20-27.
apa: Schöppner, V., & Arndt, T. (2023). Entwicklung von Scale-Up-Regeln für
das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten. Joining
Plastics, 17, 20–27.
bibtex: '@article{Schöppner_Arndt_2023, title={Entwicklung von Scale-Up-Regeln für
das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten}, number={17},
journal={Joining Plastics}, author={Schöppner, Volker and Arndt, Theresa}, year={2023},
pages={20–27} }'
chicago: 'Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln
für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” Joining
Plastics, no. 17 (2023): 20–27.'
ieee: V. Schöppner and T. Arndt, “Entwicklung von Scale-Up-Regeln für das quasisimultane
Laserdurchstrahlschweißen (QSS) von Thermoplasten,” Joining Plastics, no.
17, pp. 20–27, 2023.
mla: Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln für
das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” Joining
Plastics, no. 17, 2023, pp. 20–27.
short: V. Schöppner, T. Arndt, Joining Plastics (2023) 20–27.
date_created: 2023-11-07T14:06:25Z
date_updated: 2023-11-07T14:06:57Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: '17'
language:
- iso: ger
page: 20-27
publication: Joining Plastics
publication_identifier:
issn:
- 1864-3450
status: public
title: Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen
(QSS) von Thermoplasten
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48662'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: J.
full_name: Petzke, J.
last_name: Petzke
citation:
ama: 'Schöppner V, Petzke J. Dielectric Heating in the Vulcanization Process of
Rubber Extrudates. In: ; 2023.'
apa: Schöppner, V., & Petzke, J. (2023). Dielectric Heating in the Vulcanization
Process of Rubber Extrudates. Annual Technical Conference of the Society of
Plastics Engineers (ANTEC), Denver, CO (USA).
bibtex: '@inproceedings{Schöppner_Petzke_2023, place={Denver, CO (USA)}, title={Dielectric
Heating in the Vulcanization Process of Rubber Extrudates}, author={Schöppner,
Volker and Petzke, J.}, year={2023} }'
chicago: Schöppner, Volker, and J. Petzke. “Dielectric Heating in the Vulcanization
Process of Rubber Extrudates.” Denver, CO (USA), 2023.
ieee: V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process
of Rubber Extrudates,” presented at the Annual Technical Conference of the Society
of Plastics Engineers (ANTEC), Denver, CO (USA), 2023.
mla: Schöppner, Volker, and J. Petzke. Dielectric Heating in the Vulcanization
Process of Rubber Extrudates. 2023.
short: 'V. Schöppner, J. Petzke, in: Denver, CO (USA), 2023.'
conference:
location: Denver, CO (USA)
name: Annual Technical Conference of the Society of Plastics Engineers (ANTEC)
date_created: 2023-11-07T13:50:30Z
date_updated: 2023-11-07T13:50:34Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Denver, CO (USA)
status: public
title: Dielectric Heating in the Vulcanization Process of Rubber Extrudates
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48663'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Christian
full_name: Held, Christian
id: '40647'
last_name: Held
citation:
ama: 'Moritzer E, Held C. Direktverschraubung additiv gefertigter Kunststoffbauteile.
In: DVS Media GmbH, ed. ; 2023.'
apa: Moritzer, E., & Held, C. (2023). Direktverschraubung additiv gefertigter
Kunststoffbauteile (DVS Media GmbH, Ed.).
bibtex: '@inproceedings{Moritzer_Held_2023, place={Essen (Deutschland)}, title={Direktverschraubung
additiv gefertigter Kunststoffbauteile}, author={Moritzer, Elmar and Held, Christian},
editor={DVS Media GmbH}, year={2023} }'
chicago: Moritzer, Elmar, and Christian Held. “Direktverschraubung additiv gefertigter
Kunststoffbauteile.” edited by DVS Media GmbH. Essen (Deutschland), 2023.
ieee: E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,”
Essen (Deutschland), 2023.
mla: Moritzer, Elmar, and Christian Held. Direktverschraubung additiv gefertigter
Kunststoffbauteile. Edited by DVS Media GmbH, 2023.
short: 'E. Moritzer, C. Held, in: DVS Media GmbH (Ed.), Essen (Deutschland), 2023.'
conference:
location: Essen (Deutschland)
name: DVS Congress 2023
corporate_editor:
- DVS Media GmbH
date_created: 2023-11-07T13:52:58Z
date_updated: 2023-11-07T13:59:40Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
place: Essen (Deutschland)
status: public
title: Direktverschraubung additiv gefertigter Kunststoffbauteile
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48751'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Karina
full_name: Gevers, Karina
id: '83151'
last_name: Gevers
- first_name: N.
full_name: Hoenen, N.
last_name: Hoenen
- first_name: K.
full_name: Uhlig, K.
last_name: Uhlig
- first_name: P.
full_name: Töws, P.
last_name: Töws
- first_name: J.
full_name: Decker, J.
last_name: Decker
- first_name: M.
full_name: Stommel, M.
last_name: Stommel
citation:
ama: Schöppner V, Gevers K, Hoenen N, et al. Simulation of Infrared Welded Short
Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka Homogenization Method.
Advanced Structured Materials. Published online 2023.
apa: Schöppner, V., Gevers, K., Hoenen, N., Uhlig, K., Töws, P., Decker, J., &
Stommel, M. (2023). Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic
Parts based on Mori-Tanaka Homogenization Method. Advanced Structured Materials.
bibtex: '@article{Schöppner_Gevers_Hoenen_Uhlig_Töws_Decker_Stommel_2023, title={Simulation
of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based on Mori-Tanaka
Homogenization Method}, journal={Advanced Structured Materials}, author={Schöppner,
Volker and Gevers, Karina and Hoenen, N. and Uhlig, K. and Töws, P. and Decker,
J. and Stommel, M.}, year={2023} }'
chicago: Schöppner, Volker, Karina Gevers, N. Hoenen, K. Uhlig, P. Töws, J. Decker,
and M. Stommel. “Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic
Parts Based on Mori-Tanaka Homogenization Method.” Advanced Structured Materials,
2023.
ieee: V. Schöppner et al., “Simulation of Infrared Welded Short Fiber Reinforced
Thermoplastic Parts based on Mori-Tanaka Homogenization Method,” Advanced Structured
Materials, 2023.
mla: Schöppner, Volker, et al. “Simulation of Infrared Welded Short Fiber Reinforced
Thermoplastic Parts Based on Mori-Tanaka Homogenization Method.” Advanced Structured
Materials, 2023.
short: V. Schöppner, K. Gevers, N. Hoenen, K. Uhlig, P. Töws, J. Decker, M. Stommel,
Advanced Structured Materials (2023).
date_created: 2023-11-09T13:29:35Z
date_updated: 2023-11-09T13:29:39Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
publication: Advanced Structured Materials
status: public
title: Simulation of Infrared Welded Short Fiber Reinforced Thermoplastic Parts based
on Mori-Tanaka Homogenization Method
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48754'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Laura
full_name: Austermeier, Laura
id: '45326'
last_name: Austermeier
- first_name: Dorte
full_name: Trienens, Dorte
id: '44116'
last_name: Trienens
citation:
ama: Schöppner V, Austermeier L, Trienens D. Verbesserung der Betriebspunktauslegung
durch Schneckensimulation. Wissenschaftlicher Arbeitskreis Kunststofftechnik.
Published online 2023:62-66.
apa: Schöppner, V., Austermeier, L., & Trienens, D. (2023). Verbesserung der
Betriebspunktauslegung durch Schneckensimulation. Wissenschaftlicher Arbeitskreis
Kunststofftechnik, 62–66.
bibtex: '@article{Schöppner_Austermeier_Trienens_2023, title={Verbesserung der Betriebspunktauslegung
durch Schneckensimulation}, journal={Wissenschaftlicher Arbeitskreis Kunststofftechnik},
author={Schöppner, Volker and Austermeier, Laura and Trienens, Dorte}, year={2023},
pages={62–66} }'
chicago: Schöppner, Volker, Laura Austermeier, and Dorte Trienens. “Verbesserung
der Betriebspunktauslegung durch Schneckensimulation.” Wissenschaftlicher Arbeitskreis
Kunststofftechnik, 2023, 62–66.
ieee: V. Schöppner, L. Austermeier, and D. Trienens, “Verbesserung der Betriebspunktauslegung
durch Schneckensimulation,” Wissenschaftlicher Arbeitskreis Kunststofftechnik,
pp. 62–66, 2023.
mla: Schöppner, Volker, et al. “Verbesserung der Betriebspunktauslegung durch Schneckensimulation.”
Wissenschaftlicher Arbeitskreis Kunststofftechnik, 2023, pp. 62–66.
short: V. Schöppner, L. Austermeier, D. Trienens, Wissenschaftlicher Arbeitskreis
Kunststofftechnik (2023) 62–66.
date_created: 2023-11-09T13:34:09Z
date_updated: 2023-11-09T13:34:11Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
page: 62-66
publication: Wissenschaftlicher Arbeitskreis Kunststofftechnik
publication_identifier:
issn:
- 1618-8357
status: public
title: Verbesserung der Betriebspunktauslegung durch Schneckensimulation
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48752'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Maximilian
full_name: Scholle, Maximilian
id: '35736'
last_name: Scholle
citation:
ama: 'Moritzer E, Scholle M. The main factors influencing glass fiber shortening
in the processing of bulk molding compounds (BMC). In: ; 2023.'
apa: Moritzer, E., & Scholle, M. (2023). The main factors influencing glass
fiber shortening in the processing of bulk molding compounds (BMC). 38th International
Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz).
bibtex: '@inproceedings{Moritzer_Scholle_2023, place={St. Gallen (Schweiz)}, title={The
main factors influencing glass fiber shortening in the processing of bulk molding
compounds (BMC)}, author={Moritzer, Elmar and Scholle, Maximilian}, year={2023}
}'
chicago: Moritzer, Elmar, and Maximilian Scholle. “The Main Factors Influencing
Glass Fiber Shortening in the Processing of Bulk Molding Compounds (BMC).” St.
Gallen (Schweiz), 2023.
ieee: E. Moritzer and M. Scholle, “The main factors influencing glass fiber shortening
in the processing of bulk molding compounds (BMC),” presented at the 38th International
Conference of the Polymer Processing Society (PPS), St. Gallen (Schweiz), 2023.
mla: Moritzer, Elmar, and Maximilian Scholle. The Main Factors Influencing Glass
Fiber Shortening in the Processing of Bulk Molding Compounds (BMC). 2023.
short: 'E. Moritzer, M. Scholle, in: St. Gallen (Schweiz), 2023.'
conference:
location: St. Gallen (Schweiz)
name: 38th International Conference of the Polymer Processing Society (PPS)
date_created: 2023-11-09T13:30:54Z
date_updated: 2023-11-09T13:30:56Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: St. Gallen (Schweiz)
status: public
title: The main factors influencing glass fiber shortening in the processing of bulk
molding compounds (BMC)
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48748'
author:
- first_name: Jonas
full_name: Köllermeier, Jonas
id: '58933'
last_name: Köllermeier
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: 'Köllermeier J, Schöppner V. Optimizing the Processing Performance of a Single
Screw Extruder Using Live Simulations Based on Real Time Experimental Data. In:
; 2023.'
apa: Köllermeier, J., & Schöppner, V. (2023). Optimizing the Processing Performance
of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
Data. 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland).
bibtex: '@inproceedings{Köllermeier_Schöppner_2023, place={Ilmenau (Deutschland)},
title={Optimizing the Processing Performance of a Single Screw Extruder Using
Live Simulations Based on Real Time Experimental Data}, author={Köllermeier, Jonas
and Schöppner, Volker}, year={2023} }'
chicago: Köllermeier, Jonas, and Volker Schöppner. “Optimizing the Processing Performance
of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
Data.” Ilmenau (Deutschland), 2023.
ieee: J. Köllermeier and V. Schöppner, “Optimizing the Processing Performance of
a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
Data,” presented at the 60th Ilmenau Scientific Colloquium, Ilmenau (Deutschland),
2023.
mla: Köllermeier, Jonas, and Volker Schöppner. Optimizing the Processing Performance
of a Single Screw Extruder Using Live Simulations Based on Real Time Experimental
Data. 2023.
short: 'J. Köllermeier, V. Schöppner, in: Ilmenau (Deutschland), 2023.'
conference:
location: Ilmenau (Deutschland)
name: 60th Ilmenau Scientific Colloquium
date_created: 2023-11-09T13:20:57Z
date_updated: 2023-11-09T13:23:31Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
place: Ilmenau (Deutschland)
status: public
title: Optimizing the Processing Performance of a Single Screw Extruder Using Live
Simulations Based on Real Time Experimental Data
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48749'
author:
- first_name: Sascha
full_name: Vogtschmidt, Sascha
id: '32492'
last_name: Vogtschmidt
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Vogtschmidt S, Schöppner V. Schweißnahtkennwerte für die lebensdaueroptimierte
Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Joining Plastics.
Published online 2023.
apa: Vogtschmidt, S., & Schöppner, V. (2023). Schweißnahtkennwerte für die lebensdaueroptimierte
Bauteilauslegung von hochtemperaturbeständigen Thermoplasten. Joining Plastics.
bibtex: '@article{Vogtschmidt_Schöppner_2023, title={Schweißnahtkennwerte für die
lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten},
journal={Joining Plastics}, author={Vogtschmidt, Sascha and Schöppner, Volker},
year={2023} }'
chicago: Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die
lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.”
Joining Plastics, 2023.
ieee: S. Vogtschmidt and V. Schöppner, “Schweißnahtkennwerte für die lebensdaueroptimierte
Bauteilauslegung von hochtemperaturbeständigen Thermoplasten,” Joining Plastics,
2023.
mla: Vogtschmidt, Sascha, and Volker Schöppner. “Schweißnahtkennwerte für die lebensdaueroptimierte
Bauteilauslegung von hochtemperaturbeständigen Thermoplasten.” Joining Plastics,
2023.
short: S. Vogtschmidt, V. Schöppner, Joining Plastics (2023).
date_created: 2023-11-09T13:23:18Z
date_updated: 2023-11-09T13:23:21Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
publication: Joining Plastics
status: public
title: Schweißnahtkennwerte für die lebensdaueroptimierte Bauteilauslegung von hochtemperaturbeständigen
Thermoplasten
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48753'
author:
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
- first_name: Maximilian
full_name: Frank, Maximilian
id: '38255'
last_name: Frank
- first_name: Christoph Wilhelm Theodor
full_name: Schall, Christoph Wilhelm Theodor
id: '44224'
last_name: Schall
citation:
ama: Schöppner V, Frank M, Schall CWT. The Wave Must Be Right. Plastic Insights.
2023;(7/2023):52-54.
apa: Schöppner, V., Frank, M., & Schall, C. W. T. (2023). The Wave Must Be Right.
Plastic Insights, 7/2023, 52–54.
bibtex: '@article{Schöppner_Frank_Schall_2023, title={The Wave Must Be Right}, number={7/2023},
journal={Plastic Insights}, author={Schöppner, Volker and Frank, Maximilian and
Schall, Christoph Wilhelm Theodor}, year={2023}, pages={52–54} }'
chicago: 'Schöppner, Volker, Maximilian Frank, and Christoph Wilhelm Theodor Schall.
“The Wave Must Be Right.” Plastic Insights, no. 7/2023 (2023): 52–54.'
ieee: V. Schöppner, M. Frank, and C. W. T. Schall, “The Wave Must Be Right,” Plastic
Insights, no. 7/2023, pp. 52–54, 2023.
mla: Schöppner, Volker, et al. “The Wave Must Be Right.” Plastic Insights,
no. 7/2023, 2023, pp. 52–54.
short: V. Schöppner, M. Frank, C.W.T. Schall, Plastic Insights (2023) 52–54.
date_created: 2023-11-09T13:32:22Z
date_updated: 2023-11-09T13:32:29Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
issue: 7/2023
language:
- iso: eng
page: 52-54
publication: Plastic Insights
publication_identifier:
issn:
- 2941-4202
status: public
title: The Wave Must Be Right
type: journal_article
user_id: '44116'
year: '2023'
...
---
_id: '48755'
author:
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Christian
full_name: Held, Christian
id: '40647'
last_name: Held
citation:
ama: 'Moritzer E, Held C. Vorspannkraftrelaxation bei der Direktverschraubung additiv
gefertigter Kunststoffbauteile. In: ; 2023.'
apa: Moritzer, E., & Held, C. (2023). Vorspannkraftrelaxation bei der Direktverschraubung
additiv gefertigter Kunststoffbauteile. 28. Technomer, Chemnitz (Deutschland).
bibtex: '@inproceedings{Moritzer_Held_2023, place={Chemnitz (Deutschland)}, title={Vorspannkraftrelaxation
bei der Direktverschraubung additiv gefertigter Kunststoffbauteile}, author={Moritzer,
Elmar and Held, Christian}, year={2023} }'
chicago: Moritzer, Elmar, and Christian Held. “Vorspannkraftrelaxation bei der Direktverschraubung
additiv gefertigter Kunststoffbauteile.” Chemnitz (Deutschland), 2023.
ieee: E. Moritzer and C. Held, “Vorspannkraftrelaxation bei der Direktverschraubung
additiv gefertigter Kunststoffbauteile,” presented at the 28. Technomer, Chemnitz
(Deutschland), 2023.
mla: Moritzer, Elmar, and Christian Held. Vorspannkraftrelaxation bei der Direktverschraubung
additiv gefertigter Kunststoffbauteile. 2023.
short: 'E. Moritzer, C. Held, in: Chemnitz (Deutschland), 2023.'
conference:
location: Chemnitz (Deutschland)
name: 28. Technomer
date_created: 2023-11-09T13:35:17Z
date_updated: 2023-11-09T13:35:20Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: ger
place: Chemnitz (Deutschland)
status: public
title: Vorspannkraftrelaxation bei der Direktverschraubung additiv gefertigter Kunststoffbauteile
type: conference
user_id: '44116'
year: '2023'
...
---
_id: '48781'
abstract:
- lang: eng
text: In a punch-bending machine, wire products are manufactured for a wide range
of industrial sectors, such as the electronics industry. The raw material for
this process is flat wire made of high-strength steel. During the manufacturing
process of the flat wire, residual stresses and plastic deformations are induced
into the wire. These residual stresses and deformations fluctuate over the length
of the semi-finished product and have a negative effect on the final product quality.
Straightening machines are used to reduce this influence to a minimum. So far,
the adjustment of a straightening machine has been performed manually, which is
a lengthy and complex task even for an experienced worker. This inevitably leads
to the use of inefficient straightening strategies and causes high rejection rates
in the entire production process. Due to a lack of sensor information from the
straightening operation, application of modern feedback control methods has not
been practicable. This paper presents a novel design for a straightening machine
with an integrated, precise straightening force measurement. By simultaneously
monitoring the position of the straightening rollers, state variables of the straightening
operation can be derived. Additionally, a tension control for feeding the flat
wire is introduced. This is implemented to mitigate the disturbing effects caused
by irregularities in the wire-feeding process. In the results of this article,
the high precision of the developed force measurement design and its possible
applications are shown.
author:
- first_name: Lukas
full_name: Bathelt, Lukas
last_name: Bathelt
- first_name: Maximilian
full_name: Scurk, Maximilian
last_name: Scurk
- first_name: Eugen
full_name: Djakow, Eugen
id: '7904'
last_name: Djakow
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Bathelt L, Scurk M, Djakow E, Henke C, Trächtler A. Novel Straightening-Machine
Design with Integrated Force Measurement for Straightening of High-Strength Flat
Wire. Sensors. 2023;23(22). doi:10.3390/s23229091
apa: Bathelt, L., Scurk, M., Djakow, E., Henke, C., & Trächtler, A. (2023).
Novel Straightening-Machine Design with Integrated Force Measurement for Straightening
of High-Strength Flat Wire. Sensors, 23(22). https://doi.org/10.3390/s23229091
bibtex: '@article{Bathelt_Scurk_Djakow_Henke_Trächtler_2023, title={Novel Straightening-Machine
Design with Integrated Force Measurement for Straightening of High-Strength Flat
Wire}, volume={23}, DOI={10.3390/s23229091},
number={22}, journal={Sensors}, author={Bathelt, Lukas and Scurk, Maximilian and
Djakow, Eugen and Henke, Christian and Trächtler, Ansgar}, year={2023} }'
chicago: Bathelt, Lukas, Maximilian Scurk, Eugen Djakow, Christian Henke, and Ansgar
Trächtler. “Novel Straightening-Machine Design with Integrated Force Measurement
for Straightening of High-Strength Flat Wire.” Sensors 23, no. 22 (2023).
https://doi.org/10.3390/s23229091.
ieee: 'L. Bathelt, M. Scurk, E. Djakow, C. Henke, and A. Trächtler, “Novel Straightening-Machine
Design with Integrated Force Measurement for Straightening of High-Strength Flat
Wire,” Sensors, vol. 23, no. 22, 2023, doi: 10.3390/s23229091.'
mla: Bathelt, Lukas, et al. “Novel Straightening-Machine Design with Integrated
Force Measurement for Straightening of High-Strength Flat Wire.” Sensors,
vol. 23, no. 22, 2023, doi:10.3390/s23229091.
short: L. Bathelt, M. Scurk, E. Djakow, C. Henke, A. Trächtler, Sensors 23 (2023).
date_created: 2023-11-10T14:25:34Z
date_updated: 2023-11-10T14:28:15Z
department:
- _id: '241'
- _id: '153'
doi: 10.3390/s23229091
intvolume: ' 23'
issue: '22'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/1424-8220/23/22/9091
oa: '1'
publication: Sensors
publication_identifier:
issn:
- 1424-8220
quality_controlled: '1'
status: public
title: Novel Straightening-Machine Design with Integrated Force Measurement for Straightening
of High-Strength Flat Wire
type: journal_article
user_id: '41470'
volume: 23
year: '2023'
...
---
_id: '48095'
abstract:
- lang: eng
text: Fused deposition modeling (FDM) is an additive manufacturing process that
can be used to manufacture three-dimensional thermoplastic components layer by
layer. One disadvantage of FDM is the shrinkage of the components during the manufacturing
process. The filament is molten in the nozzle, deposited layer by layer, and cools
down again. During solidification, the filament shrinks inhomogeneously in the
x/y/z direction, which leads to distortion of the component geometries. Particularly
with higher nominal lengths and complex local geometries, there is a need for
optimization with regard to dimensional accuracy. The aim of this paper is to
counteract this on the software side with global as well as local shrinkage factors.
The expected shrinkage within a layer is predicted with an in-house developed
software. The geometric accuracy of the model is verified by experimental investigations
on cylindrical test specimens. In these, the so-called clover effect occurs as
a result of the shrinkage. The circular shape of the deposited layer is deformed
by the distortion in the x–y plane comparable to a clover. Finally, the results
are validated by analyzing a demonstrator in the form of a bracket.
author:
- first_name: Thorsten
full_name: Koers, Thorsten
id: '38077'
last_name: Koers
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
citation:
ama: 'Koers T, Magyar B. Compensation of the Shrinkage Behavior Occurring in Cylindrical
Components in the FDM Process. In: Lamanna G, Opran C, eds. Macromolecular
Symposia. Vol 411. Wiley; 2023. doi:https://doi.org/10.1002/masy.202200185'
apa: Koers, T., & Magyar, B. (2023). Compensation of the Shrinkage Behavior
Occurring in Cylindrical Components in the FDM Process. In G. Lamanna & C.
Opran (Eds.), Macromolecular Symposia (Vol. 411, Issue 1). Wiley. https://doi.org/10.1002/masy.202200185
bibtex: '@inproceedings{Koers_Magyar_2023, title={Compensation of the Shrinkage
Behavior Occurring in Cylindrical Components in the FDM Process}, volume={411},
DOI={https://doi.org/10.1002/masy.202200185},
number={1}, booktitle={Macromolecular Symposia}, publisher={Wiley}, author={Koers,
Thorsten and Magyar, Balázs}, editor={Lamanna, Giuseppe and Opran, Constantin},
year={2023} }'
chicago: Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior
Occurring in Cylindrical Components in the FDM Process.” In Macromolecular
Symposia, edited by Giuseppe Lamanna and Constantin Opran, Vol. 411. Wiley,
2023. https://doi.org/10.1002/masy.202200185.
ieee: 'T. Koers and B. Magyar, “Compensation of the Shrinkage Behavior Occurring
in Cylindrical Components in the FDM Process,” in Macromolecular Symposia,
Bucharest, Romania, 2023, vol. 411, no. 1, doi: https://doi.org/10.1002/masy.202200185.'
mla: Koers, Thorsten, and Balázs Magyar. “Compensation of the Shrinkage Behavior
Occurring in Cylindrical Components in the FDM Process.” Macromolecular Symposia,
edited by Giuseppe Lamanna and Constantin Opran, vol. 411, no. 1, Wiley, 2023,
doi:https://doi.org/10.1002/masy.202200185.
short: 'T. Koers, B. Magyar, in: G. Lamanna, C. Opran (Eds.), Macromolecular Symposia,
Wiley, 2023.'
conference:
end_date: 2022-11-26
location: Bucharest, Romania
name: Conference on Design and Technologies for Polymeric and Composites Products
‐ POLCOM 2022
start_date: 2022-11-23
date_created: 2023-10-16T12:48:42Z
date_updated: 2023-11-17T11:36:15Z
department:
- _id: '146'
- _id: '219'
- _id: '9'
doi: https://doi.org/10.1002/masy.202200185
editor:
- first_name: Giuseppe
full_name: Lamanna, Giuseppe
last_name: Lamanna
- first_name: Constantin
full_name: Opran, Constantin
last_name: Opran
intvolume: ' 411'
issue: '1'
language:
- iso: eng
publication: Macromolecular Symposia
publisher: Wiley
quality_controlled: '1'
status: public
title: Compensation of the Shrinkage Behavior Occurring in Cylindrical Components
in the FDM Process
type: conference
user_id: '38077'
volume: 411
year: '2023'
...
---
_id: '49155'
abstract:
- lang: ger
text: Hybride Bauteile, welche aus Werkstoffen mit hohen spezifischen Festigkeiten
bestehen, können zu einem signifikanten Leichtbau im Automobil beitragen. Diese
Arbeit erforscht die hybride Kombination von pressgehärtetem Stahl und kohlenstofffaserverstärktem
Kunststoff. Ausgehend von einer Analyse bestehender Karosseriestrukturen erfolgt
ein Konzept für eine hybride B-Säule. Das Potential zur Gewichtsreduzierung durch
das hybride Bauteilkonzept wurde dabei zu 57 % identifiziert, welches jedoch nur
bei Sicherstellung einer intakten Grenzfläche erreicht wird. Zur Erlangung der
Grenzflächenfestigkeit bei charakteristischen Belastungsprofilen wurde ein Verfahren
zur Einbringung makroskopischer Formschlusselemente im Presshärteprozess entwickelt.
Durch diese Formschlusselemente wird eine Steigerung der Scherfestigkeit der hybriden
Komponenten von über 300 % erreicht. Die gewonnenen Erkenntnisse werden abschließend
zur Auslegung einer hybriden B-Säule angewendet.
- lang: eng
text: Hybrid components consisting of materials with high specific strengths can
contribute to significant automotive lightweight design. This thesis investigates
the hybrid combination of press-hardened steel and carbon fiber-reinforced plastics.
Based on a potential analysis of existing body-in-white structures, a concept
for a hybrid B-pillar is developed. The potential for weight reduction through
the hybrid component concept was identified to be 57 %, which is only achieved
if an intact interface is ensured. To achieve interface strength under characteristic
load profiles, a method was developed for creating macroscopic form closures in
the press hardening process. These form closures achieve an increase in the shear
strength of the hybrid components of over 300 %. Finally, the knowledge gained
is applied to the design of a hybrid B-pillar.
author:
- first_name: Marcel
full_name: Triebus, Marcel
id: '66036'
last_name: Triebus
citation:
ama: Triebus M. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff.; 2023.
doi:10.17619/UNIPB/1-1719
apa: Triebus, M. (2023). Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff. https://doi.org/10.17619/UNIPB/1-1719
bibtex: '@book{Triebus_2023, title={Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff}, DOI={10.17619/UNIPB/1-1719}, author={Triebus,
Marcel}, year={2023} }'
chicago: Triebus, Marcel. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff, 2023.
https://doi.org/10.17619/UNIPB/1-1719.
ieee: M. Triebus, Belastungsgerechte Auslegung automobiler Leichtbaustrukturen
aus pressgehärtetem Stahl und kohlenstofffaserverstärktem Kunststoff. 2023.
mla: Triebus, Marcel. Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff. 2023,
doi:10.17619/UNIPB/1-1719.
short: M. Triebus, Belastungsgerechte Auslegung Automobiler Leichtbaustrukturen
Aus Pressgehärtetem Stahl Und Kohlenstofffaserverstärktem Kunststoff, 2023.
date_created: 2023-11-23T11:35:44Z
date_updated: 2023-11-23T11:50:35Z
department:
- _id: '321'
- _id: '9'
- _id: '149'
doi: 10.17619/UNIPB/1-1719
language:
- iso: eng
status: public
title: Belastungsgerechte Auslegung automobiler Leichtbaustrukturen aus pressgehärtetem
Stahl und kohlenstofffaserverstärktem Kunststoff
type: dissertation
user_id: '66036'
year: '2023'
...
---
_id: '48072'
abstract:
- lang: eng
text: Die weltweit erzeugten Emissionen müssen in allen emittierenden Sektoren signifikant
gesenkt werden, um die Auswirkungen des Klimawandels zu reduzieren. Dies ist unter
anderem durch die energieeffiziente Wiederverwertung vorhandener Ressourcen und
damit der Einstellung einer nachhaltigen Kreislaufwirtschaft möglich. Aufgrund
der hohen erforderlichen Energiemenge in der primären Herstellung von Aluminium
existieren hier im Vergleich zu anderen Konstruktionswerkstoffen große Einsparpotentiale.
Mit dem in dieser Arbeit erforschten reibungsinduzierten Recyclingverfahren (RIR)
wird eine alternative und energieeffiziente Prozessroute zum direkten Recycling
von unterschiedlichen Aluminiumschrotten geschaffen. Zur Charakterisierung der
Prozessroute werden u. a. die Erkenntnisse aus sich gegenseitig unterstützenden
experimentellen und theoretischen Untersuchungen zu den Vorgängen der der Verdichtung,
Plastifizierung als auch Extrusion der recycelten Profile dargelegt. Die Einflüsse
unterschiedlicher Eingangsgrößen wie z. B. der Werkzeuggestaltung oder der Verarbeitung
unterschiedlicher Legierungen werden zudem zur zukünftigen Auslegung des Prozesses
erläutert. Aus der abschließenden energetischen Bilanzierung kann geschlossen
werden, dass aufgrund der geringeren Verarbeitungstemperatur signifikante Energieersparnisse
bei Verwendung des RIR im Vergleich zu den konventionellen Produktionsstrategien
erzielt werden können.
author:
- first_name: Thomas
full_name: Borgert, Thomas
id: '83141'
last_name: Borgert
citation:
ama: Borgert T. Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
Recycling von Aluminiumschrotten.; 2023.
apa: Borgert, T. (2023). Reibungsinduzierter Prozess zum nutzerindividuellen
und energieeffizienten Recycling von Aluminiumschrotten.
bibtex: '@book{Borgert_2023, title={Reibungsinduzierter Prozess zum nutzerindividuellen
und energieeffizienten Recycling von Aluminiumschrotten}, author={Borgert, Thomas},
year={2023} }'
chicago: Borgert, Thomas. Reibungsinduzierter Prozess zum nutzerindividuellen
und energieeffizienten Recycling von Aluminiumschrotten, 2023.
ieee: T. Borgert, Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
Recycling von Aluminiumschrotten. 2023.
mla: Borgert, Thomas. Reibungsinduzierter Prozess zum nutzerindividuellen und
energieeffizienten Recycling von Aluminiumschrotten. 2023.
short: T. Borgert, Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
Recycling von Aluminiumschrotten, 2023.
date_created: 2023-10-16T07:13:03Z
date_updated: 2023-10-16T07:13:41Z
department:
- _id: '156'
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-9240-0&search=yes
page: '200'
publication_identifier:
isbn:
- 978-3-8440-9240-0
publication_status: published
status: public
supervisor:
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
title: Reibungsinduzierter Prozess zum nutzerindividuellen und energieeffizienten
Recycling von Aluminiumschrotten
type: dissertation
user_id: '83141'
year: '2023'
...
---
_id: '48570'
author:
- first_name: Cederic
full_name: Lenz, Cederic
last_name: Lenz
- first_name: Christian
full_name: Henke, Christian
last_name: Henke
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Lenz C, Henke C, Trächtler A. A Methodical Approach to Hybrid Modelling for
Contextual Anomaly Detection on Time-Series Data. In: 2023 IEEE 21st International
Conference on Industrial Informatics (INDIN). IEEE; 2023. doi:10.1109/indin51400.2023.10218108'
apa: Lenz, C., Henke, C., & Trächtler, A. (2023). A Methodical Approach to Hybrid
Modelling for Contextual Anomaly Detection on Time-Series Data. 2023 IEEE 21st
International Conference on Industrial Informatics (INDIN). https://doi.org/10.1109/indin51400.2023.10218108
bibtex: '@inproceedings{Lenz_Henke_Trächtler_2023, title={A Methodical Approach
to Hybrid Modelling for Contextual Anomaly Detection on Time-Series Data}, DOI={10.1109/indin51400.2023.10218108},
booktitle={2023 IEEE 21st International Conference on Industrial Informatics (INDIN)},
publisher={IEEE}, author={Lenz, Cederic and Henke, Christian and Trächtler, Ansgar},
year={2023} }'
chicago: Lenz, Cederic, Christian Henke, and Ansgar Trächtler. “A Methodical Approach
to Hybrid Modelling for Contextual Anomaly Detection on Time-Series Data.” In
2023 IEEE 21st International Conference on Industrial Informatics (INDIN).
IEEE, 2023. https://doi.org/10.1109/indin51400.2023.10218108.
ieee: 'C. Lenz, C. Henke, and A. Trächtler, “A Methodical Approach to Hybrid Modelling
for Contextual Anomaly Detection on Time-Series Data,” 2023, doi: 10.1109/indin51400.2023.10218108.'
mla: Lenz, Cederic, et al. “A Methodical Approach to Hybrid Modelling for Contextual
Anomaly Detection on Time-Series Data.” 2023 IEEE 21st International Conference
on Industrial Informatics (INDIN), IEEE, 2023, doi:10.1109/indin51400.2023.10218108.
short: 'C. Lenz, C. Henke, A. Trächtler, in: 2023 IEEE 21st International Conference
on Industrial Informatics (INDIN), IEEE, 2023.'
date_created: 2023-10-31T13:49:23Z
date_updated: 2023-10-31T13:50:43Z
department:
- _id: '153'
- _id: '241'
doi: 10.1109/indin51400.2023.10218108
language:
- iso: eng
publication: 2023 IEEE 21st International Conference on Industrial Informatics (INDIN)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: A Methodical Approach to Hybrid Modelling for Contextual Anomaly Detection
on Time-Series Data
type: conference
user_id: '41470'
year: '2023'
...