---
_id: '48585'
abstract:
- lang: eng
text: The use of stainless steel with high strain hardening as material for self-piercing
rivets is a promising approach to shorten the manufacturing process. Due to the
corrosion resistance of the material and the achieved high strength within the
forming process, the heat treatment and the coating can be omitted. As the strength
within the rivet material is achieved by cold forming, the strength distribution
within the rivet remains intact after the manufacturing process. The aim of the
contribution presented is the exploitation of the potential of this strength distribution
to improve the performance of the self-piercing rivets. Therefore, the scope of
the examination is on the analysis of the influence of the local strength on the
deformation behaviour of the rivet during joining. While it is unfeasible to manufacture
rivets with any desired strength distribution, numerical simulation offers an
efficient opportunity to study the effects of varying local strengths. By using
a definable true strain distribution within the rivet as presetting for the simulation,
different strength distributions can be modelled. Through the simulation of the
joining process, the deformation behaviour of the rivet can be examined. Based
on the insights of this analysis, a strength distribution is created that supports
the joining of challenging material combinations consisting of high strength steel
and aluminium. Finally, the approach is verified by experimental joining tests.
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Uhe B, Kuball C-M, Merklein M, Meschut G. Controlled Rivet Deformation During
Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet
Material. In: Mocellin K, Bouchard P-O, Bigot Régis, Balan T, eds. Proceedings
of the 14th International Conference on the Technology of Plasticity - Current
Trends in the Technology of Plasticity. Vol 3. Lecture Notes in Mechanical
Engineering. Springer; 2023:64-71. doi:10.1007/978-3-031-41341-4_8'
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2023). Controlled
Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution
Within the Rivet Material. In K. Mocellin, P.-O. Bouchard, Régis Bigot, &
T. Balan (Eds.), Proceedings of the 14th International Conference on the Technology
of Plasticity - Current Trends in the Technology of Plasticity. (Vol. 3, pp.
64–71). Springer. https://doi.org/10.1007/978-3-031-41341-4_8
bibtex: '@inproceedings{Uhe_Kuball_Merklein_Meschut_2023, place={Cham}, series={Lecture
Notes in Mechanical Engineering.}, title={Controlled Rivet Deformation During
Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet
Material}, volume={3}, DOI={10.1007/978-3-031-41341-4_8},
booktitle={Proceedings of the 14th International Conference on the Technology
of Plasticity - Current Trends in the Technology of Plasticity.}, publisher={Springer},
author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut,
Gerson}, editor={Mocellin, Katia and Bouchard, Pierre-Olivier and Bigot, Régis
and Balan, Tudor}, year={2023}, pages={64–71}, collection={Lecture Notes in Mechanical
Engineering.} }'
chicago: 'Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Controlled Rivet Deformation During Self-Piercing Riveting Through a Tailored
Strength Distribution Within the Rivet Material.” In Proceedings of the 14th
International Conference on the Technology of Plasticity - Current Trends in the
Technology of Plasticity., edited by Katia Mocellin, Pierre-Olivier Bouchard, Régis
Bigot, and Tudor Balan, 3:64–71. Lecture Notes in Mechanical Engineering. Cham:
Springer, 2023. https://doi.org/10.1007/978-3-031-41341-4_8.'
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Controlled Rivet Deformation
During Self-piercing Riveting Through a Tailored Strength Distribution Within
the Rivet Material,” in Proceedings of the 14th International Conference on
the Technology of Plasticity - Current Trends in the Technology of Plasticity.,
2023, vol. 3, pp. 64–71, doi: 10.1007/978-3-031-41341-4_8.'
mla: Uhe, Benedikt, et al. “Controlled Rivet Deformation During Self-Piercing Riveting
Through a Tailored Strength Distribution Within the Rivet Material.” Proceedings
of the 14th International Conference on the Technology of Plasticity - Current
Trends in the Technology of Plasticity., edited by Katia Mocellin et al.,
vol. 3, Springer, 2023, pp. 64–71, doi:10.1007/978-3-031-41341-4_8.
short: 'B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: K. Mocellin, P.-O. Bouchard, Régis
Bigot, T. Balan (Eds.), Proceedings of the 14th International Conference on the
Technology of Plasticity - Current Trends in the Technology of Plasticity., Springer,
Cham, 2023, pp. 64–71.'
date_created: 2023-11-02T08:06:11Z
date_updated: 2026-02-27T10:07:14Z
department:
- _id: '157'
doi: 10.1007/978-3-031-41341-4_8
editor:
- first_name: Katia
full_name: Mocellin, Katia
last_name: Mocellin
- first_name: Pierre-Olivier
full_name: Bouchard, Pierre-Olivier
last_name: Bouchard
- first_name: ' Régis'
full_name: Bigot, Régis
last_name: Bigot
- first_name: Tudor
full_name: Balan, Tudor
last_name: Balan
intvolume: ' 3'
language:
- iso: eng
page: 64-71
place: Cham
publication: Proceedings of the 14th International Conference on the Technology of
Plasticity - Current Trends in the Technology of Plasticity.
publisher: Springer
quality_controlled: '1'
series_title: Lecture Notes in Mechanical Engineering.
status: public
title: Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored
Strength Distribution Within the Rivet Material
type: conference
user_id: '53912'
volume: 3
year: '2023'
...
---
_id: '48584'
abstract:
- lang: eng
text: The sustainability of the manufacturing industry is of special importance
to increase the protection of the environment. The production of fasteners like
self-piercing rivets, however, is costly, time-consuming and energy-intensive.
The heat treatment and the coating, which are mandatory in conventional self-piercing
rivets to achieve adequate strength, ductility and corrosion resistance, are especially
crucial in this respect. Within this paper, an approach for an increase in the
sustainability in fastener production is presented. The use of alternative, high
strain hardening stainless steels as rivet material enables a shortening of the
process chain, because post treatment of the rivets after they are formed can
be omitted. As the change in rivet material and processing causes some issues
along the process chain, the focus of this paper is on the holistic evaluation
of the challenges within the forming of high strain hardening steel and the impact
of the changed rivet properties on the joining result.
article_number: '193'
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Uhe B, Kuball C-M, Merklein M, Meschut G. Increased Sustainability in Fastener
Production with the Example of Self-Piercing Rivets. Journal of Manufacturing
and Materials Processing. 2023;7(6). doi:10.3390/jmmp7060193
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2023). Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets. Journal of
Manufacturing and Materials Processing, 7(6), Article 193. https://doi.org/10.3390/jmmp7060193
bibtex: '@article{Uhe_Kuball_Merklein_Meschut_2023, title={Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets}, volume={7},
DOI={10.3390/jmmp7060193}, number={6193},
journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG},
author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut,
Gerson}, year={2023} }'
chicago: Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Increased Sustainability in Fastener Production with the Example of Self-Piercing
Rivets.” Journal of Manufacturing and Materials Processing 7, no. 6 (2023).
https://doi.org/10.3390/jmmp7060193.
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Increased Sustainability
in Fastener Production with the Example of Self-Piercing Rivets,” Journal of
Manufacturing and Materials Processing, vol. 7, no. 6, Art. no. 193, 2023,
doi: 10.3390/jmmp7060193.'
mla: Uhe, Benedikt, et al. “Increased Sustainability in Fastener Production with
the Example of Self-Piercing Rivets.” Journal of Manufacturing and Materials
Processing, vol. 7, no. 6, 193, MDPI AG, 2023, doi:10.3390/jmmp7060193.
short: B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, Journal of Manufacturing and
Materials Processing 7 (2023).
date_created: 2023-11-02T07:58:35Z
date_updated: 2026-02-27T10:16:17Z
department:
- _id: '157'
doi: 10.3390/jmmp7060193
intvolume: ' 7'
issue: '6'
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
publication: Journal of Manufacturing and Materials Processing
publication_identifier:
issn:
- 2504-4494
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Increased Sustainability in Fastener Production with the Example of Self-Piercing
Rivets
type: journal_article
user_id: '38131'
volume: 7
year: '2023'
...
---
_id: '44220'
abstract:
- lang: eng
text: With regard to environmental protection, the sustainability of production
processes is decisive. Mechanical joining technologies like self-piercing riveting
are of special importance with regard to realising lightweight constructions in
the automotive industry. However, the production of self-piercing rivets is costly,
time-consuming and energy-intensive, as the rivets conventionally must be heat
treated and coated in order to ensure an adequate strength, ductility and corrosion
resistance. Within this paper, it is shown by the example of a newly established
rivet manufacturing process how the sustainability of fastener production can
be increased. The general approach in this context is the use of alternative,
high strain hardening stainless steels as rivet material, which allows the omission
of the post treatment of the rivets after forming. The shortening of the process
chain enables a more sustainable rivet production. Thus, not only the energy consumption
is reduced, but also costs, which is why the novel manufacturing process is also
of interest from an economic point of view.
author:
- first_name: Benedikt
full_name: Uhe, Benedikt
id: '38131'
last_name: Uhe
- first_name: Clara-Maria
full_name: Kuball, Clara-Maria
last_name: Kuball
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Uhe B, Kuball C-M, Merklein M, Meschut G. Approach for a sustainable process
chain in manufacturing of fasteners for mechanical joining. In: Materials Research
Proceedings; 2023. doi:10.21741/9781644902417-49'
apa: Uhe, B., Kuball, C.-M., Merklein, M., & Meschut, G. (2023). Approach
for a sustainable process chain in manufacturing of fasteners for mechanical joining.
20th International Conference on Sheet Metal (SheMet) 2023, Nürnberg. https://doi.org/10.21741/9781644902417-49
bibtex: '@inproceedings{Uhe_Kuball_Merklein_Meschut_2023, place={Millersville, PA,
USA}, title={Approach for a sustainable process chain in manufacturing of fasteners
for mechanical joining}, DOI={10.21741/9781644902417-49},
publisher={Materials Research Proceedings}, author={Uhe, Benedikt and Kuball,
Clara-Maria and Merklein, Marion and Meschut, Gerson}, year={2023} }'
chicago: 'Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut.
“Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical
Joining.” Millersville, PA, USA: Materials Research Proceedings, 2023. https://doi.org/10.21741/9781644902417-49.'
ieee: 'B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Approach for a sustainable
process chain in manufacturing of fasteners for mechanical joining,” presented
at the 20th International Conference on Sheet Metal (SheMet) 2023, Nürnberg, 2023,
doi: 10.21741/9781644902417-49.'
mla: Uhe, Benedikt, et al. Approach for a Sustainable Process Chain in Manufacturing
of Fasteners for Mechanical Joining. Materials Research Proceedings, 2023,
doi:10.21741/9781644902417-49.
short: 'B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: Materials Research Proceedings,
Millersville, PA, USA, 2023.'
conference:
end_date: 2023-04-05
location: Nürnberg
name: 20th International Conference on Sheet Metal (SheMet) 2023
start_date: 2023-04-02
date_created: 2023-04-27T10:56:34Z
date_updated: 2026-02-27T10:19:07Z
department:
- _id: '157'
doi: 10.21741/9781644902417-49
language:
- iso: eng
place: Millersville, PA, USA
publisher: Materials Research Proceedings
quality_controlled: '1'
status: public
title: Approach for a sustainable process chain in manufacturing of fasteners for
mechanical joining
type: conference
user_id: '53912'
year: '2023'
...
---
_id: '51117'
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
- first_name: Olga
full_name: Friesen, Olga
id: '44026'
last_name: Friesen
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Scheidemann C, Hemsel T, Friesen O, Claes L, Sextro W. Influence of Temperature
and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics.
In: ; 2023.'
apa: Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., & Sextro, W. (2023).
Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior
of Ring-Shaped Ceramics. 7th International Conference on Advanced Electromaterials
(ICAE 2023), Jeju, Korea.
bibtex: '@inproceedings{Scheidemann_Hemsel_Friesen_Claes_Sextro_2023, title={Influence
of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped
Ceramics}, author={Scheidemann, Claus and Hemsel, Tobias and Friesen, Olga and
Claes, Leander and Sextro, Walter}, year={2023} }'
chicago: Scheidemann, Claus, Tobias Hemsel, Olga Friesen, Leander Claes, and Walter
Sextro. “Influence of Temperature and Pre-Stress on the Piezoelectric Material
Behavior of Ring-Shaped Ceramics,” 2023.
ieee: C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence
of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped
Ceramics,” presented at the 7th International Conference on Advanced Electromaterials
(ICAE 2023), Jeju, Korea, 2023.
mla: Scheidemann, Claus, et al. Influence of Temperature and Pre-Stress on the
Piezoelectric Material Behavior of Ring-Shaped Ceramics. 2023.
short: 'C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, W. Sextro, in: 2023.'
conference:
end_date: 2023-11-03
location: Jeju, Korea
name: 7th International Conference on Advanced Electromaterials (ICAE 2023)
start_date: 2023-10-31
date_created: 2024-02-01T15:55:44Z
date_updated: 2026-03-02T10:59:13Z
ddc:
- '620'
department:
- _id: '151'
- _id: '49'
file:
- access_level: open_access
content_type: application/pdf
creator: hemsel
date_created: 2026-01-30T07:15:31Z
date_updated: 2026-03-02T10:59:13Z
file_id: '63815'
file_name: Sch23_ICAE_2023.pdf
file_size: 608243
relation: main_file
file_date_updated: 2026-03-02T10:59:13Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '245'
name: 'FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken
für Leistungsschallanwendungen (NEPTUN)'
status: public
title: Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior
of Ring-Shaped Ceramics
type: conference
user_id: '210'
year: '2023'
...
---
_id: '51727'
author:
- first_name: Janis
full_name: Beimdiek, Janis
id: '45788'
last_name: Beimdiek
orcid: 0009-0001-1348-496X
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Beimdiek J, Schmid H-J. Entrained flow SCR using an in-situ synthesis of catalyst
particles for a combined flue gas cleaning system. In: VDI Verlag; 2023.'
apa: Beimdiek, J., & Schmid, H.-J. (2023). Entrained flow SCR using an in-situ
synthesis of catalyst particles for a combined flue gas cleaning system. International
Congress on Particle Technology | PARTEC 2023, Nürnberg.
bibtex: '@inproceedings{Beimdiek_Schmid_2023, place={Düsseldorf}, title={Entrained
flow SCR using an in-situ synthesis of catalyst particles for a combined flue
gas cleaning system}, publisher={VDI Verlag}, author={Beimdiek, Janis and Schmid,
Hans-Joachim}, year={2023} }'
chicago: 'Beimdiek, Janis, and Hans-Joachim Schmid. “Entrained Flow SCR Using an
In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System.”
Düsseldorf: VDI Verlag, 2023.'
ieee: J. Beimdiek and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis
of catalyst particles for a combined flue gas cleaning system,” presented at the
International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.
mla: Beimdiek, Janis, and Hans-Joachim Schmid. Entrained Flow SCR Using an In-Situ
Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System. VDI
Verlag, 2023.
short: 'J. Beimdiek, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.'
conference:
end_date: 2023-09-28
location: Nürnberg
name: International Congress on Particle Technology | PARTEC 2023
start_date: 2023-09-26
date_created: 2024-02-21T16:28:49Z
date_updated: 2025-09-18T08:53:29Z
ddc:
- '660'
department:
- _id: '9'
- _id: '150'
file:
- access_level: closed
content_type: application/pdf
creator: jludwig
date_created: 2024-02-21T16:27:47Z
date_updated: 2024-02-21T16:27:47Z
file_id: '51728'
file_name: Extended Abstract_PARTEC.pdf
file_size: 130920
relation: main_file
success: 1
file_date_updated: 2024-02-21T16:27:47Z
has_accepted_license: '1'
language:
- iso: eng
place: Düsseldorf
publisher: VDI Verlag
status: public
title: Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined
flue gas cleaning system
type: conference
user_id: '45788'
year: '2023'
...
---
_id: '51726'
author:
- first_name: Janis
full_name: Beimdiek, Janis
id: '45788'
last_name: Beimdiek
orcid: 0009-0001-1348-496X
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: 'Beimdiek J, Schmid H-J. Neuartige Flugstrom SCR an online synthetisierten,
nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster).
In: ; 2023.'
apa: Beimdiek, J., & Schmid, H.-J. (2023). Neuartige Flugstrom SCR an online
synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess
(Poster). Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn.
bibtex: '@inproceedings{Beimdiek_Schmid_2023, place={Paderborn}, title={Neuartige
Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in
einem kombinierten Gasreinigungsprozess (Poster)}, author={Beimdiek, Janis and
Schmid, Hans-Joachim}, year={2023} }'
chicago: Beimdiek, Janis, and Hans-Joachim Schmid. “Neuartige Flugstrom SCR an online
synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess
(Poster).” Paderborn, 2023.
ieee: J. Beimdiek and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten,
nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),”
presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn,
2023.
mla: Beimdiek, Janis, and Hans-Joachim Schmid. Neuartige Flugstrom SCR an online
synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess
(Poster). 2023.
short: 'J. Beimdiek, H.-J. Schmid, in: Paderborn, 2023.'
conference:
end_date: 2023-03-29
location: Paderborn
name: Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023
start_date: 2023-03-28
date_created: 2024-02-21T16:18:17Z
date_updated: 2025-09-18T08:49:17Z
ddc:
- '660'
department:
- _id: '9'
- _id: '150'
file:
- access_level: closed
content_type: application/pdf
creator: jludwig
date_created: 2024-02-21T16:30:16Z
date_updated: 2024-02-21T16:30:16Z
file_id: '51729'
file_name: Poster_Gasreinigung.pdf
file_size: 803920
relation: main_file
success: 1
file_date_updated: 2024-02-21T16:30:16Z
has_accepted_license: '1'
language:
- iso: ger
place: Paderborn
status: public
title: Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln
in einem kombinierten Gasreinigungsprozess (Poster)
type: conference_abstract
user_id: '45788'
year: '2023'
...
---
_id: '51147'
author:
- first_name: Orlando
full_name: Massopo, Orlando
id: '98419'
last_name: Massopo
- first_name: Ricardo
full_name: Tischendorf, Ricardo
id: '67002'
last_name: Tischendorf
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Fabian
full_name: Fröde, Fabian
last_name: Fröde
- first_name: Temistocle
full_name: Grenga, Temistocle
last_name: Grenga
- first_name: Heinz
full_name: Pitsch, Heinz
last_name: Pitsch
- first_name: Malte
full_name: Bieber, Malte
last_name: Bieber
- first_name: Manuel
full_name: Reddemann, Manuel
last_name: Reddemann
- first_name: Reinhold
full_name: Kneer, Reinhold
last_name: Kneer
citation:
ama: 'Massopo O, Tischendorf R, Schmid H-J, et al. Influence of atomization on the
particle formation in spray flame pyrolysis (Presentation). In: International
Congress of Particle Technology; 2023.'
apa: Massopo, O., Tischendorf, R., Schmid, H.-J., Fröde, F., Grenga, T., Pitsch,
H., Bieber, M., Reddemann, M., & Kneer, R. (2023). Influence of atomization
on the particle formation in spray flame pyrolysis (Presentation). International
Congress of Particle Technology, Nürnberg.
bibtex: '@inproceedings{Massopo_Tischendorf_Schmid_Fröde_Grenga_Pitsch_Bieber_Reddemann_Kneer_2023,
place={Nürnberg}, title={Influence of atomization on the particle formation in
spray flame pyrolysis (Presentation)}, publisher={International Congress of Particle
Technology}, author={Massopo, Orlando and Tischendorf, Ricardo and Schmid, Hans-Joachim
and Fröde, Fabian and Grenga, Temistocle and Pitsch, Heinz and Bieber, Malte and
Reddemann, Manuel and Kneer, Reinhold}, year={2023} }'
chicago: 'Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde,
Temistocle Grenga, Heinz Pitsch, Malte Bieber, Manuel Reddemann, and Reinhold
Kneer. “Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis
(Presentation).” Nürnberg: International Congress of Particle Technology, 2023.'
ieee: O. Massopo et al., “Influence of atomization on the particle formation
in spray flame pyrolysis (Presentation),” presented at the International Congress
of Particle Technology, Nürnberg, 2023.
mla: Massopo, Orlando, et al. Influence of Atomization on the Particle Formation
in Spray Flame Pyrolysis (Presentation). International Congress of Particle
Technology, 2023.
short: 'O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch,
M. Bieber, M. Reddemann, R. Kneer, in: International Congress of Particle Technology,
Nürnberg, 2023.'
conference:
end_date: 2023-09-28
location: Nürnberg
name: International Congress of Particle Technology
start_date: 2023-09-26
date_created: 2024-02-05T12:59:39Z
date_updated: 2025-09-18T10:49:39Z
department:
- _id: '150'
keyword:
- Flame Stability
- Particle Sample Extraction
- SMPS
- Impurities
language:
- iso: eng
place: Nürnberg
publisher: International Congress of Particle Technology
status: public
title: Influence of atomization on the particle formation in spray flame pyrolysis
(Presentation)
type: conference_abstract
user_id: '98419'
year: '2023'
...
---
_id: '51142'
author:
- first_name: Orlando
full_name: Massopo, Orlando
id: '98419'
last_name: Massopo
- first_name: Ricardo
full_name: Tischendorf, Ricardo
id: '67002'
last_name: Tischendorf
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
- first_name: Fabian
full_name: Fröde, Fabian
last_name: Fröde
- first_name: Heinz
full_name: Pitsch, Heinz
last_name: Pitsch
- first_name: Manuel
full_name: Reddemann, Manuel
last_name: Reddemann
- first_name: Temistocle
full_name: Grenga, Temistocle
last_name: Grenga
- first_name: Reinhold
full_name: Kneer, Reinhold
last_name: Kneer
citation:
ama: 'Massopo O, Tischendorf R, Schmid H-J, et al. Einfluss der Zerstäubung auf
diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag). In: Jahrestreffen der
DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik;
2023.'
apa: Massopo, O., Tischendorf, R., Schmid, H.-J., Fröde, F., Pitsch, H., Reddemann,
M., Grenga, T., & Kneer, R. (2023). Einfluss der Zerstäubung auf diePartikelbildung
bei der Sprayflammenpyrolyse (Vortrag). Jahrestreffen der DECHEMA-Fachgruppen
Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn.
bibtex: '@inproceedings{Massopo_Tischendorf_Schmid_Fröde_Pitsch_Reddemann_Grenga_Kneer_2023,
place={Paderborn}, title={Einfluss der Zerstäubung auf diePartikelbildung bei
der Sprayflammenpyrolyse (Vortrag)}, publisher={Jahrestreffen der DECHEMA-Fachgruppen
Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik}, author={Massopo,
Orlando and Tischendorf, Ricardo and Schmid, Hans-Joachim and Fröde, Fabian and
Pitsch, Heinz and Reddemann, Manuel and Grenga, Temistocle and Kneer, Reinhold},
year={2023} }'
chicago: 'Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde,
Heinz Pitsch, Manuel Reddemann, Temistocle Grenga, and Reinhold Kneer. “Einfluss
Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag).”
Paderborn: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung,
Mehrphasenströmung und Partikelmesstechnik, 2023.'
ieee: O. Massopo et al., “Einfluss der Zerstäubung auf diePartikelbildung
bei der Sprayflammenpyrolyse (Vortrag),” presented at the Jahrestreffen der DECHEMA-Fachgruppen
Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn,
2023.
mla: Massopo, Orlando, et al. Einfluss Der Zerstäubung Auf DiePartikelbildung
Bei Der Sprayflammenpyrolyse (Vortrag). Jahrestreffen der DECHEMA-Fachgruppen
Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, 2023.
short: 'O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann,
T. Grenga, R. Kneer, in: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik,
Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.'
conference:
end_date: 2023-03-30
location: Paderborn
name: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung
und Partikelmesstechnik
start_date: 2023-03-28
date_created: 2024-02-05T12:37:04Z
date_updated: 2025-09-18T11:16:36Z
department:
- _id: '150'
keyword:
- SpraySyn
- Flammenspraypyrolyse
- Maghemite Nanopartikel
- Gas to particle-Syntheseweg
- Probennahme
- Verunreinigung
language:
- iso: eng
place: Paderborn
publisher: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung
und Partikelmesstechnik
status: public
title: Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse
(Vortrag)
type: conference_abstract
user_id: '98419'
year: '2023'
...
---
_id: '62687'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Dominik
full_name: Wiechel, Dominik
id: '67161'
last_name: Wiechel
- first_name: Sven
full_name: Rarbach, Sven
id: '67999'
last_name: Rarbach
- first_name: Georg
full_name: Jacobs, Georg
last_name: Jacobs
- first_name: Gregor
full_name: Höpfner, Gregor
last_name: Höpfner
- first_name: Bastian
full_name: Menninger, Bastian
last_name: Menninger
- first_name: Jan Niklas
full_name: Schmitz, Jan Niklas
last_name: Schmitz
- first_name: Martin
full_name: Holland, Martin
last_name: Holland
- first_name: Rainer
full_name: Zeifang, Rainer
last_name: Zeifang
- first_name: Andreas
full_name: Trautheim-Hofmann, Andreas
last_name: Trautheim-Hofmann
- first_name: Paul
full_name: Grasedieck, Paul
last_name: Grasedieck
- first_name: Christian
full_name: Gentili, Christian
last_name: Gentili
- first_name: 'Florian '
full_name: 'Lüßen, Florian '
last_name: Lüßen
- first_name: Christian
full_name: Muggeo, Christian
last_name: Muggeo
- first_name: Till
full_name: Pfeiffer, Till
last_name: Pfeiffer
- first_name: Boris
full_name: Holzer, Boris
last_name: Holzer
- first_name: Svenja
full_name: Wendler, Svenja
last_name: Wendler
- first_name: Eckert
full_name: Winter, Eckert
last_name: Winter
- first_name: Daniel
full_name: Kowalke, Daniel
last_name: Kowalke
- first_name: Karsten
full_name: Anger, Karsten
last_name: Anger
- first_name: Simon
full_name: Eckert, Simon
last_name: Eckert
citation:
ama: 'Gräßler I, Pottebaum J, Wiechel D, et al. ImPaKT - IKT-Befähigte Modellbasierte
Auswirkungsanalyse in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben.
LibreCat University; 2023. doi:10.2314/KXP:1928342884'
apa: 'Gräßler, I., Pottebaum, J., Wiechel, D., Rarbach, S., Jacobs, G., Höpfner,
G., Menninger, B., Schmitz, J. N., Holland, M., Zeifang, R., Trautheim-Hofmann,
A., Grasedieck, P., Gentili, C., Lüßen, F., Muggeo, C., Pfeiffer, T., Holzer,
B., Wendler, S., Winter, E., … Eckert, S. (2023). ImPaKT - IKT-befähigte modellbasierte
Auswirkungsanalyse in der Produktentwicklung : Schlussbericht zum BMBF-Vorhaben.
LibreCat University. https://doi.org/10.2314/KXP:1928342884'
bibtex: '@book{Gräßler_Pottebaum_Wiechel_Rarbach_Jacobs_Höpfner_Menninger_Schmitz_Holland_Zeifang_et
al._2023, title={ImPaKT - IKT-befähigte modellbasierte Auswirkungsanalyse in der
Produktentwicklung : Schlussbericht zum BMBF-Vorhaben}, DOI={10.2314/KXP:1928342884},
publisher={LibreCat University}, author={Gräßler, Iris and Pottebaum, Jens and
Wiechel, Dominik and Rarbach, Sven and Jacobs, Georg and Höpfner, Gregor and Menninger,
Bastian and Schmitz, Jan Niklas and Holland, Martin and Zeifang, Rainer and et
al.}, year={2023} }'
chicago: 'Gräßler, Iris, Jens Pottebaum, Dominik Wiechel, Sven Rarbach, Georg Jacobs,
Gregor Höpfner, Bastian Menninger, et al. ImPaKT - IKT-Befähigte Modellbasierte
Auswirkungsanalyse in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben.
LibreCat University, 2023. https://doi.org/10.2314/KXP:1928342884.'
ieee: 'I. Gräßler et al., ImPaKT - IKT-befähigte modellbasierte Auswirkungsanalyse
in der Produktentwicklung : Schlussbericht zum BMBF-Vorhaben. LibreCat University,
2023.'
mla: 'Gräßler, Iris, et al. ImPaKT - IKT-Befähigte Modellbasierte Auswirkungsanalyse
in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben. LibreCat University,
2023, doi:10.2314/KXP:1928342884.'
short: 'I. Gräßler, J. Pottebaum, D. Wiechel, S. Rarbach, G. Jacobs, G. Höpfner,
B. Menninger, J.N. Schmitz, M. Holland, R. Zeifang, A. Trautheim-Hofmann, P. Grasedieck,
C. Gentili, F. Lüßen, C. Muggeo, T. Pfeiffer, B. Holzer, S. Wendler, E. Winter,
D. Kowalke, K. Anger, S. Eckert, ImPaKT - IKT-Befähigte Modellbasierte Auswirkungsanalyse
in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben, LibreCat University,
2023.'
date_created: 2025-11-28T10:42:51Z
date_updated: 2025-11-28T10:44:50Z
department:
- _id: '152'
doi: 10.2314/KXP:1928342884
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.tib.eu/de/suchen?tx_tibsearch_search%5Baction%5D=download&tx_tibsearch_search%5Bcontroller%5D=Download&tx_tibsearch_search%5Bdocid%5D=TIBKAT%3A1928342884&cHash=9467f4179e2f8b10fa9d64dba390ce4f#download-mark
oa: '1'
publisher: LibreCat University
status: public
title: 'ImPaKT - IKT-befähigte modellbasierte Auswirkungsanalyse in der Produktentwicklung
: Schlussbericht zum BMBF-Vorhaben'
type: report
user_id: '67999'
year: '2023'
...
---
_id: '46490'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Alena Marie
full_name: Tusek, Alena Marie
id: '59370'
last_name: Tusek
- first_name: Deniz
full_name: Özcan, Deniz
id: '58595'
last_name: Özcan
citation:
ama: 'Gräßler I, Tusek AM, Özcan D. Entwicklung zukunftsfähiger Geschäftsmodelle
in der Automatisierungstechnik anhand von Megatrends. In: VDI Wissensforum GmbH,
ed. Automation 2023. Vol 2419. Transformation by Automation. VDI Verlag;
2023:863-874. doi:10.51202/9783181024195-863'
apa: Gräßler, I., Tusek, A. M., & Özcan, D. (2023). Entwicklung zukunftsfähiger
Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends. In VDI
Wissensforum GmbH (Ed.), Automation 2023 (Vol. 2419, pp. 863–874). VDI
Verlag. https://doi.org/10.51202/9783181024195-863
bibtex: '@inproceedings{Gräßler_Tusek_Özcan_2023, place={Düsseldorf}, series={Transformation
by Automation}, title={Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik
anhand von Megatrends}, volume={2419}, DOI={10.51202/9783181024195-863},
booktitle={Automation 2023}, publisher={VDI Verlag}, author={Gräßler, Iris and
Tusek, Alena Marie and Özcan, Deniz}, editor={VDI Wissensforum GmbH}, year={2023},
pages={863–874}, collection={Transformation by Automation} }'
chicago: 'Gräßler, Iris, Alena Marie Tusek, and Deniz Özcan. “Entwicklung zukunftsfähiger
Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends.” In Automation
2023, edited by VDI Wissensforum GmbH, 2419:863–74. Transformation by Automation.
Düsseldorf: VDI Verlag, 2023. https://doi.org/10.51202/9783181024195-863.'
ieee: 'I. Gräßler, A. M. Tusek, and D. Özcan, “Entwicklung zukunftsfähiger Geschäftsmodelle
in der Automatisierungstechnik anhand von Megatrends,” in Automation 2023,
Baden-Baden, 2023, vol. 2419, pp. 863–874, doi: 10.51202/9783181024195-863.'
mla: Gräßler, Iris, et al. “Entwicklung zukunftsfähiger Geschäftsmodelle in der
Automatisierungstechnik anhand von Megatrends.” Automation 2023, edited
by VDI Wissensforum GmbH, vol. 2419, VDI Verlag, 2023, pp. 863–74, doi:10.51202/9783181024195-863.
short: 'I. Gräßler, A.M. Tusek, D. Özcan, in: VDI Wissensforum GmbH (Ed.), Automation
2023, VDI Verlag, Düsseldorf, 2023, pp. 863–874.'
conference:
end_date: 2023-06-28
location: Baden-Baden
name: VDI Automation
start_date: 2023-06-27
corporate_editor:
- VDI Wissensforum GmbH
date_created: 2023-08-15T07:13:18Z
date_updated: 2024-11-19T10:59:42Z
department:
- _id: '152'
doi: 10.51202/9783181024195-863
intvolume: ' 2419'
language:
- iso: ger
page: 863 - 874
place: Düsseldorf
publication: Automation 2023
publication_identifier:
isbn:
- '9783181024195'
publication_status: published
publisher: VDI Verlag
quality_controlled: '1'
series_title: Transformation by Automation
status: public
title: Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik
anhand von Megatrends
type: conference
user_id: '59370'
volume: 2419
year: '2023'
...
---
_id: '56627'
abstract:
- lang: eng
text: Pillow-plate heat exchangers (PPHEs) represent a suitable alternative
to conventional shell-and-tube and plate heat exchangers. The inherent waviness
of their channels promotes fluid mixing in the boundary layers and facilitates
heat transfer. The overall thermo-hydraulic performance of PPHEs can further be
enhanced by applying secondary surface structuring, thus increasing their competitiveness
against conventional heat exchangers. In this work, various secondary structures
applied on the PPHE surface were studied numerically to explore their potential
to enhance near-wall mixing. Computational fluid dynamics (CFD) simulations of
single-phase turbulent flow in the outer PPHE channel were performed and pressure
drop, heat transfer coefficients, and overall thermo-hydraulic efficiency were
determined. The simulation results clearly demonstrate a positive impact of secondary
structuring on heat transfer in PPHEs.
article_number: '7284'
author:
- first_name: Reza
full_name: Afsahnoudeh, Reza
id: '90390'
last_name: Afsahnoudeh
orcid: https://orcid.org/0009-0001-3161-8036
- first_name: Andreas
full_name: Wortmeier, Andreas
id: '49825'
last_name: Wortmeier
- first_name: Maik
full_name: Holzmüller, Maik
id: '82645'
last_name: Holzmüller
- first_name: Yi
full_name: Gong, Yi
id: '98514'
last_name: Gong
- first_name: Werner
full_name: Homberg, Werner
id: '233'
last_name: Homberg
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Afsahnoudeh R, Wortmeier A, Holzmüller M, Gong Y, Homberg W, Kenig E. Thermo-Hydraulic
Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical
Analysis. Energies. 2023;16(21). doi:10.3390/en16217284'
apa: 'Afsahnoudeh, R., Wortmeier, A., Holzmüller, M., Gong, Y., Homberg, W., &
Kenig, E. (2023). Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers
with Secondary Structuring: A Numerical Analysis. Energies, 16(21),
Article 7284. https://doi.org/10.3390/en16217284'
bibtex: '@article{Afsahnoudeh_Wortmeier_Holzmüller_Gong_Homberg_Kenig_2023, title={Thermo-Hydraulic
Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical
Analysis}, volume={16}, DOI={10.3390/en16217284},
number={217284}, journal={Energies}, publisher={MDPI AG}, author={Afsahnoudeh,
Reza and Wortmeier, Andreas and Holzmüller, Maik and Gong, Yi and Homberg, Werner
and Kenig, Eugeny}, year={2023} }'
chicago: 'Afsahnoudeh, Reza, Andreas Wortmeier, Maik Holzmüller, Yi Gong, Werner
Homberg, and Eugeny Kenig. “Thermo-Hydraulic Performance of Pillow-Plate Heat
Exchangers with Secondary Structuring: A Numerical Analysis.” Energies
16, no. 21 (2023). https://doi.org/10.3390/en16217284.'
ieee: 'R. Afsahnoudeh, A. Wortmeier, M. Holzmüller, Y. Gong, W. Homberg, and E.
Kenig, “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary
Structuring: A Numerical Analysis,” Energies, vol. 16, no. 21, Art. no.
7284, 2023, doi: 10.3390/en16217284.'
mla: 'Afsahnoudeh, Reza, et al. “Thermo-Hydraulic Performance of Pillow-Plate Heat
Exchangers with Secondary Structuring: A Numerical Analysis.” Energies,
vol. 16, no. 21, 7284, MDPI AG, 2023, doi:10.3390/en16217284.'
short: R. Afsahnoudeh, A. Wortmeier, M. Holzmüller, Y. Gong, W. Homberg, E. Kenig,
Energies 16 (2023).
date_created: 2024-10-15T12:10:31Z
date_updated: 2025-01-02T11:55:59Z
department:
- _id: '831'
- _id: '9'
doi: 10.3390/en16217284
intvolume: ' 16'
issue: '21'
language:
- iso: eng
publication: Energies
publication_identifier:
issn:
- 1996-1073
publication_status: published
publisher: MDPI AG
status: public
title: 'Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary
Structuring: A Numerical Analysis'
type: journal_article
user_id: '90390'
volume: 16
year: '2023'
...
---
_id: '54632'
author:
- first_name: Leon Alexander
full_name: Bentrup, Leon Alexander
id: '65001'
last_name: Bentrup
- first_name: 'Melanie '
full_name: 'Gräßer, Melanie '
last_name: Gräßer
- first_name: Katrin
full_name: Temmen, Katrin
id: '30086'
last_name: Temmen
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
orcid: 000-0001-8590-1921
citation:
ama: Bentrup LA, Gräßer M, Temmen K, Schmid H-J. Entwicklung eines neuen Konzeptes
zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des
Maschinenbaus an der Universität Paderborn. die hochschullehre. 2023;(9).
doi:10.3278/HSL2310W
apa: Bentrup, L. A., Gräßer, M., Temmen, K., & Schmid, H.-J. (2023). Entwicklung
eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen
für Studierende des Maschinenbaus an der Universität Paderborn. die hochschullehre,
9. https://doi.org/10.3278/HSL2310W
bibtex: '@article{Bentrup_Gräßer_Temmen_Schmid_2023, title={Entwicklung eines neuen
Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende
des Maschinenbaus an der Universität Paderborn}, DOI={10.3278/HSL2310W},
number={9}, journal={die hochschullehre}, publisher={wbv Publikation}, author={Bentrup,
Leon Alexander and Gräßer, Melanie and Temmen, Katrin and Schmid, Hans-Joachim},
year={2023} }'
chicago: Bentrup, Leon Alexander, Melanie Gräßer, Katrin Temmen, and Hans-Joachim
Schmid. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und
Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.”
die hochschullehre, no. 9 (2023). https://doi.org/10.3278/HSL2310W.
ieee: 'L. A. Bentrup, M. Gräßer, K. Temmen, and H.-J. Schmid, “Entwicklung eines
neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für
Studierende des Maschinenbaus an der Universität Paderborn,” die hochschullehre,
no. 9, 2023, doi: 10.3278/HSL2310W.'
mla: Bentrup, Leon Alexander, et al. “Entwicklung eines neuen Konzeptes zur Vermittlung
von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus
an der Universität Paderborn.” die hochschullehre, no. 9, wbv Publikation,
2023, doi:10.3278/HSL2310W.
short: L.A. Bentrup, M. Gräßer, K. Temmen, H.-J. Schmid, die hochschullehre (2023).
date_created: 2024-06-06T09:52:30Z
date_updated: 2025-01-13T09:06:55Z
department:
- _id: '300'
- _id: '34'
- _id: '150'
- _id: '9'
doi: 10.3278/HSL2310W
issue: '9'
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.wbv.de/shop/Entwicklung-eines-neuen-Konzeptes-zur-Vermittlung-von-Lerntechniken-und-Selbstlernkompetenzen-fuer-Studierende-des-Maschinenbaus-an-der-Universitaet-Paderborn-HSL2310W
oa: '1'
publication: die hochschullehre
publication_status: published
publisher: wbv Publikation
status: public
title: Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen
für Studierende des Maschinenbaus an der Universität Paderborn
type: journal_article
user_id: '65001'
year: '2023'
...
---
_id: '46802'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Daniel
full_name: Roesmann, Daniel
id: '54680'
last_name: Roesmann
- first_name: Marc
full_name: Unverzagt, Marc
id: '55785'
last_name: Unverzagt
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: 'Gräßler I, Roesmann D, Unverzagt M, Pottebaum J. Virtual Test Scenarios for
Human-Centered Design with Virtual Measurement Systems. In: Sensor and Measurement
Science International (SMSI 2023). AMA Service; 2023. doi:10.5162/smsi2023/p70'
apa: Gräßler, I., Roesmann, D., Unverzagt, M., & Pottebaum, J. (2023). Virtual
Test Scenarios for Human-Centered Design with Virtual Measurement Systems. Sensor
and Measurement Science International (SMSI 2023). Sensor and Measurement
Science International (SMSI 2023), Nürnberg. https://doi.org/10.5162/smsi2023/p70
bibtex: '@inproceedings{Gräßler_Roesmann_Unverzagt_Pottebaum_2023, place={Wunstorf},
title={Virtual Test Scenarios for Human-Centered Design with Virtual Measurement
Systems}, DOI={10.5162/smsi2023/p70},
booktitle={Sensor and Measurement Science International (SMSI 2023)}, publisher={AMA
Service}, author={Gräßler, Iris and Roesmann, Daniel and Unverzagt, Marc and Pottebaum,
Jens}, year={2023} }'
chicago: 'Gräßler, Iris, Daniel Roesmann, Marc Unverzagt, and Jens Pottebaum. “Virtual
Test Scenarios for Human-Centered Design with Virtual Measurement Systems.” In
Sensor and Measurement Science International (SMSI 2023). Wunstorf: AMA
Service, 2023. https://doi.org/10.5162/smsi2023/p70.'
ieee: 'I. Gräßler, D. Roesmann, M. Unverzagt, and J. Pottebaum, “Virtual Test Scenarios
for Human-Centered Design with Virtual Measurement Systems,” presented at the
Sensor and Measurement Science International (SMSI 2023), Nürnberg, 2023, doi:
10.5162/smsi2023/p70.'
mla: Gräßler, Iris, et al. “Virtual Test Scenarios for Human-Centered Design with
Virtual Measurement Systems.” Sensor and Measurement Science International
(SMSI 2023), AMA Service, 2023, doi:10.5162/smsi2023/p70.
short: 'I. Gräßler, D. Roesmann, M. Unverzagt, J. Pottebaum, in: Sensor and Measurement
Science International (SMSI 2023), AMA Service, Wunstorf, 2023.'
conference:
end_date: 11.5.2023
location: Nürnberg
name: Sensor and Measurement Science International (SMSI 2023)
start_date: 8.5.2023
date_created: 2023-09-05T08:42:17Z
date_updated: 2025-01-14T06:45:39Z
department:
- _id: '152'
doi: 10.5162/smsi2023/p70
language:
- iso: eng
place: Wunstorf
publication: Sensor and Measurement Science International (SMSI 2023)
publication_status: published
publisher: AMA Service
quality_controlled: '1'
status: public
title: Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems
type: conference
user_id: '405'
year: '2023'
...
---
_id: '50742'
abstract:
- lang: eng
text: "The nickel-based alloy Inconel 718, which is used in aerospace technology,
poses a great\r\nchallenge to conventional machining due to its high strain hardening
and toughness. Here, the laser\r\npowder bed fusion process (LPBF) offers an alternative
with potential savings if sufficiently high\r\nproductivity can be achieved. Based
on the parameter study carried out, starting from the SLM\r\nSolutions standard
parameters for the manufacturing of components, exposure parameters could be\r\ndeveloped
to realize manufacturing with 120 μm and 150 μm layer thickness, with almost the
same\r\ngeometric accuracy. For this purpose, the process parameters of laser
power, focus diameter, hatch\r\ndistance and scan speed were varied. The negative
defocusing of the laser showed a positive effect\r\non the density of the parts,
realizing densities ≥ 99.94 %, with high dimensional stability and good\r\nmechanical
properties. Considering the reduced manufacturing time of up to 61 %, a significant\r\nincrease
in productivity was achieved."
author:
- first_name: Christian
full_name: Bödger, Christian
id: '93904'
last_name: Bödger
- first_name: Stefan
full_name: Gnaase, Stefan
id: '25730'
last_name: Gnaase
- first_name: Dennis
full_name: Lehnert, Dennis
id: '90491'
last_name: Lehnert
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Bödger C, Gnaase S, Lehnert D, Tröster T. Investigation of the influence of
process parameters on productivity in the LPBF process for the material Inconel
718. In: Proceedings of the 34th Annual International Solid Freeform Fabrication
Symposium – An Additive Manufacturing Conference. ; 2023.'
apa: Bödger, C., Gnaase, S., Lehnert, D., & Tröster, T. (2023). Investigation
of the influence of process parameters on productivity in the LPBF process for
the material Inconel 718. Proceedings of the 34th Annual International Solid
Freeform Fabrication Symposium – An Additive Manufacturing Conference. Solid
Freeform Fabrication, Austin.
bibtex: '@inproceedings{Bödger_Gnaase_Lehnert_Tröster_2023, title={Investigation
of the influence of process parameters on productivity in the LPBF process for
the material Inconel 718}, booktitle={Proceedings of the 34th Annual International
Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference},
author={Bödger, Christian and Gnaase, Stefan and Lehnert, Dennis and Tröster,
Thomas}, year={2023} }'
chicago: Bödger, Christian, Stefan Gnaase, Dennis Lehnert, and Thomas Tröster. “Investigation
of the Influence of Process Parameters on Productivity in the LPBF Process for
the Material Inconel 718.” In Proceedings of the 34th Annual International
Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference,
2023.
ieee: C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence
of process parameters on productivity in the LPBF process for the material Inconel
718,” presented at the Solid Freeform Fabrication, Austin, 2023.
mla: Bödger, Christian, et al. “Investigation of the Influence of Process Parameters
on Productivity in the LPBF Process for the Material Inconel 718.” Proceedings
of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive
Manufacturing Conference, 2023.
short: 'C. Bödger, S. Gnaase, D. Lehnert, T. Tröster, in: Proceedings of the 34th
Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing
Conference, 2023.'
conference:
end_date: 2023-08-16
location: Austin
name: Solid Freeform Fabrication
start_date: 2023-08-14
date_created: 2024-01-23T08:32:28Z
date_updated: 2025-03-18T12:44:43Z
ddc:
- '670'
department:
- _id: '149'
- _id: '219'
- _id: '321'
- _id: '9'
file:
- access_level: closed
content_type: application/pdf
creator: cboedger
date_created: 2024-01-23T08:25:26Z
date_updated: 2024-01-23T08:25:26Z
file_id: '50743'
file_name: Investigation of the influence of process parameters on productivity
in the LPBF process for the material Inconel718 - Bödger.pdf
file_size: 999107
relation: main_file
success: 1
file_date_updated: 2024-01-23T08:25:26Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://utw10945.utweb.utexas.edu/sites/default/files/2023/091%20InvestigationoftheInfluenceofProcessParametersonProductivityintheLPBFProcessfortheMat.pdf
oa: '1'
publication: Proceedings of the 34th Annual International Solid Freeform Fabrication
Symposium – An Additive Manufacturing Conference
publication_status: published
status: public
title: Investigation of the influence of process parameters on productivity in the
LPBF process for the material Inconel 718
type: conference
user_id: '90491'
year: '2023'
...
---
_id: '37200'
abstract:
- lang: eng
text: (1) This work answers the question of whether and to what extent there
is a significant difference in mechanical properties when different additive manufacturing
processes are applied to the material 1.2709. The Laser-Powder-Bed-Fusion (L-PBF)
and Laser-Metal-Deposition (LMD) processes are considered, as they differ fundamentally
in the way a part is manufactured. (2) Known process parameters for low-porosity
parts were used to fabricate tensile strength specimens. Half of the specimens
were heat-treated, and all specimens were tested for mechanical properties in
a quasi-static tensile test. In addition, the material hardness was determined.
(3) It was found that, firstly, heat treatment resulted in a sharp increase in
mechanical properties such as hardness, elastic modulus, yield strength and ultimate
strength. In addition to the increase in these properties, the elongation at break
also decreases significantly after heat treatment. The choice of process, on the
other hand, does not give either process a clear advantage in terms of mechanical
properties but shows that it is necessary to consider the essential mechanical
properties for a desired application.
article_number: '157'
article_type: original
author:
- first_name: Stefan
full_name: Gnaase, Stefan
id: '25730'
last_name: Gnaase
- first_name: Dennis
full_name: Niggemeyer, Dennis
id: '77214'
last_name: Niggemeyer
- first_name: Dennis
full_name: Lehnert, Dennis
id: '90491'
last_name: Lehnert
- first_name: Christian
full_name: Bödger, Christian
id: '93904'
last_name: Bödger
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Gnaase S, Niggemeyer D, Lehnert D, Bödger C, Tröster T. Comparative Study of
the Influence of Heat Treatment and Additive Manufacturing Process (LMD &
L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. Crystals.
2023;13(2). doi:10.3390/cryst13020157
apa: Gnaase, S., Niggemeyer, D., Lehnert, D., Bödger, C., & Tröster, T. (2023).
Comparative Study of the Influence of Heat Treatment and Additive Manufacturing
Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured
from 1.2709. Crystals, 13(2), Article 157. https://doi.org/10.3390/cryst13020157
bibtex: '@article{Gnaase_Niggemeyer_Lehnert_Bödger_Tröster_2023, title={Comparative
Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD
& L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709},
volume={13}, DOI={10.3390/cryst13020157},
number={2157}, journal={Crystals}, publisher={MDPI AG}, author={Gnaase, Stefan
and Niggemeyer, Dennis and Lehnert, Dennis and Bödger, Christian and Tröster,
Thomas}, year={2023} }'
chicago: Gnaase, Stefan, Dennis Niggemeyer, Dennis Lehnert, Christian Bödger, and
Thomas Tröster. “Comparative Study of the Influence of Heat Treatment and Additive
Manufacturing Process (LMD & L-PBF) on the Mechanical Properties of Specimens
Manufactured from 1.2709.” Crystals 13, no. 2 (2023). https://doi.org/10.3390/cryst13020157.
ieee: 'S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative
Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD
& L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,”
Crystals, vol. 13, no. 2, Art. no. 157, 2023, doi: 10.3390/cryst13020157.'
mla: Gnaase, Stefan, et al. “Comparative Study of the Influence of Heat Treatment
and Additive Manufacturing Process (LMD & L-PBF) on the Mechanical Properties
of Specimens Manufactured from 1.2709.” Crystals, vol. 13, no. 2, 157,
MDPI AG, 2023, doi:10.3390/cryst13020157.
short: S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, T. Tröster, Crystals 13
(2023).
date_created: 2023-01-18T05:44:59Z
date_updated: 2025-03-18T12:45:57Z
ddc:
- '670'
department:
- _id: '149'
- _id: '9'
- _id: '321'
doi: 10.3390/cryst13020157
file:
- access_level: closed
content_type: application/pdf
creator: cboedger
date_created: 2024-11-22T15:55:07Z
date_updated: 2024-11-22T15:55:07Z
file_id: '57334'
file_name: crystals-13-00157.pdf
file_size: 5838834
relation: main_file
success: 1
file_date_updated: 2024-11-22T15:55:07Z
intvolume: ' 13'
issue: '2'
keyword:
- Inorganic Chemistry
- Condensed Matter Physics
- General Materials Science
- General Chemical Engineering
language:
- iso: eng
publication: Crystals
publication_identifier:
issn:
- 2073-4352
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Comparative Study of the Influence of Heat Treatment and Additive Manufacturing
Process (LMD & L-PBF) on the Mechanical Properties of Specimens Manufactured
from 1.2709
type: journal_article
user_id: '90491'
volume: 13
year: '2023'
...
---
_id: '53079'
article_type: original
author:
- first_name: Thomas
full_name: Bierkandt, Thomas
last_name: Bierkandt
- first_name: Patrick
full_name: Hemberger, Patrick
last_name: Hemberger
- first_name: Patrick
full_name: Oßwald, Patrick
last_name: Oßwald
- first_name: Nina
full_name: Gaiser, Nina
last_name: Gaiser
- first_name: Martin
full_name: Hoener, Martin
last_name: Hoener
- first_name: Dominik
full_name: Krüger, Dominik
last_name: Krüger
- first_name: Tina
full_name: Kasper, Tina
id: '94562'
last_name: Kasper
orcid: '0000-0003-3993-5316 '
- first_name: Markus
full_name: Köhler, Markus
last_name: Köhler
citation:
ama: Bierkandt T, Hemberger P, Oßwald P, et al. A combustion chemistry study of
tetramethylethylene in a laminar premixed low-pressure hydrogen flame. Proceedings
of the Combustion Institute. 2023;39(2):1699-1708. doi:10.1016/j.proci.2022.07.205
apa: Bierkandt, T., Hemberger, P., Oßwald, P., Gaiser, N., Hoener, M., Krüger, D.,
Kasper, T., & Köhler, M. (2023). A combustion chemistry study of tetramethylethylene
in a laminar premixed low-pressure hydrogen flame. Proceedings of the Combustion
Institute, 39(2), 1699–1708. https://doi.org/10.1016/j.proci.2022.07.205
bibtex: '@article{Bierkandt_Hemberger_Oßwald_Gaiser_Hoener_Krüger_Kasper_Köhler_2023,
title={A combustion chemistry study of tetramethylethylene in a laminar premixed
low-pressure hydrogen flame}, volume={39}, DOI={10.1016/j.proci.2022.07.205},
number={2}, journal={Proceedings of the Combustion Institute}, publisher={Elsevier
BV}, author={Bierkandt, Thomas and Hemberger, Patrick and Oßwald, Patrick and
Gaiser, Nina and Hoener, Martin and Krüger, Dominik and Kasper, Tina and Köhler,
Markus}, year={2023}, pages={1699–1708} }'
chicago: 'Bierkandt, Thomas, Patrick Hemberger, Patrick Oßwald, Nina Gaiser, Martin
Hoener, Dominik Krüger, Tina Kasper, and Markus Köhler. “A Combustion Chemistry
Study of Tetramethylethylene in a Laminar Premixed Low-Pressure Hydrogen Flame.”
Proceedings of the Combustion Institute 39, no. 2 (2023): 1699–1708. https://doi.org/10.1016/j.proci.2022.07.205.'
ieee: 'T. Bierkandt et al., “A combustion chemistry study of tetramethylethylene
in a laminar premixed low-pressure hydrogen flame,” Proceedings of the Combustion
Institute, vol. 39, no. 2, pp. 1699–1708, 2023, doi: 10.1016/j.proci.2022.07.205.'
mla: Bierkandt, Thomas, et al. “A Combustion Chemistry Study of Tetramethylethylene
in a Laminar Premixed Low-Pressure Hydrogen Flame.” Proceedings of the Combustion
Institute, vol. 39, no. 2, Elsevier BV, 2023, pp. 1699–708, doi:10.1016/j.proci.2022.07.205.
short: T. Bierkandt, P. Hemberger, P. Oßwald, N. Gaiser, M. Hoener, D. Krüger, T.
Kasper, M. Köhler, Proceedings of the Combustion Institute 39 (2023) 1699–1708.
date_created: 2024-03-27T16:16:17Z
date_updated: 2025-07-08T10:35:30Z
department:
- _id: '728'
doi: 10.1016/j.proci.2022.07.205
intvolume: ' 39'
issue: '2'
keyword:
- Physical and Theoretical Chemistry
- Mechanical Engineering
- General Chemical Engineering
language:
- iso: eng
page: 1699-1708
publication: Proceedings of the Combustion Institute
publication_identifier:
issn:
- 1540-7489
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: A combustion chemistry study of tetramethylethylene in a laminar premixed low-pressure
hydrogen flame
type: journal_article
user_id: '94562'
volume: 39
year: '2023'
...
---
_id: '53077'
abstract:
- lang: eng
text: Flame spray pyrolysis is intensively developing as a promising method of nanoparticle
synthesis. The experimentally measured chemical and thermal structure of the spray
flame is critically needed as a validation target for simulations of the synthesis
of nanoparticles in these spray flames. This paper presents an experimental study
of the chemical and thermal structure of the flame produced by the SpraySyn burner.
The spatial distribution of the main species is obtained by microprobe sampling
in combination with orthogonal time-of-flight mass spectrometry. The temperature
distribution is obtained by a micro-thermocouple technique. The presented species
and temperature data are discussed in the context of their experimental uncertainties
and the plausibility of the flame structure.
article_type: original
author:
- first_name: Munko
full_name: Gonchikzhapov, Munko
id: '94996'
last_name: Gonchikzhapov
orcid: https://orcid.org/0000-0002-7773-047X
- first_name: Tina
full_name: Kasper, Tina
id: '94562'
last_name: Kasper
orcid: '0000-0003-3993-5316 '
citation:
ama: Gonchikzhapov M, Kasper T. Thermal and chemical structure of ethanol and 2-ethylhexanoic
acid/ethanol SpraySyn flames. Applications in Engery and Combustion Science.
2023;15. doi:10.1016/j.jaecs.2023.100174
apa: Gonchikzhapov, M., & Kasper, T. (2023). Thermal and chemical structure
of ethanol and 2-ethylhexanoic acid/ethanol SpraySyn flames. Applications in
Engery and Combustion Science, 15. https://doi.org/10.1016/j.jaecs.2023.100174
bibtex: '@article{Gonchikzhapov_Kasper_2023, title={Thermal and chemical structure
of ethanol and 2-ethylhexanoic acid/ethanol SpraySyn flames}, volume={15}, DOI={10.1016/j.jaecs.2023.100174},
journal={Applications in Engery and Combustion Science}, author={Gonchikzhapov,
Munko and Kasper, Tina}, year={2023} }'
chicago: Gonchikzhapov, Munko, and Tina Kasper. “Thermal and Chemical Structure
of Ethanol and 2-Ethylhexanoic Acid/Ethanol SpraySyn Flames.” Applications
in Engery and Combustion Science 15 (2023). https://doi.org/10.1016/j.jaecs.2023.100174.
ieee: 'M. Gonchikzhapov and T. Kasper, “Thermal and chemical structure of ethanol
and 2-ethylhexanoic acid/ethanol SpraySyn flames,” Applications in Engery and
Combustion Science, vol. 15, 2023, doi: 10.1016/j.jaecs.2023.100174.'
mla: Gonchikzhapov, Munko, and Tina Kasper. “Thermal and Chemical Structure of Ethanol
and 2-Ethylhexanoic Acid/Ethanol SpraySyn Flames.” Applications in Engery and
Combustion Science, vol. 15, 2023, doi:10.1016/j.jaecs.2023.100174.
short: M. Gonchikzhapov, T. Kasper, Applications in Engery and Combustion Science
15 (2023).
date_created: 2024-03-27T16:13:55Z
date_updated: 2025-07-08T10:35:22Z
department:
- _id: '728'
doi: 10.1016/j.jaecs.2023.100174
funded_apc: '1'
intvolume: ' 15'
language:
- iso: eng
publication: Applications in Engery and Combustion Science
publication_status: published
quality_controlled: '1'
status: public
title: Thermal and chemical structure of ethanol and 2-ethylhexanoic acid/ethanol
SpraySyn flames
type: journal_article
user_id: '94562'
volume: 15
year: '2023'
...
---
_id: '46500'
abstract:
- lang: eng
text: The security of Industrial Control Systems is relevant both for reliable production
system operations and for high-quality throughput in terms of manufactured products.
Security measures are designed, operated and maintained by different roles along
product and production system lifecycles. Defense-in-Depth as a paradigm builds
upon the assumption that breaches are unavoidable. The paper at hand provides
an analysis of roles, corresponding Human Factors and their relevance for data
theft and sabotage attacks. The resulting taxonomy is reflected by an example
related to Additive Manufacturing. The results assist in both designing and redesigning
Industrial Control System as part of an entire production system so that Defense-in-Depth
with regard to Human Factors is built in by design.
author:
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
- first_name: Jost
full_name: Rossel, Jost
id: '58331'
last_name: Rossel
orcid: 0000-0002-3182-4059
- first_name: Juraj
full_name: Somorovsky, Juraj
id: '83504'
last_name: Somorovsky
orcid: 0000-0002-3593-7720
- first_name: Yasemin
full_name: Acar, Yasemin
id: '94636'
last_name: Acar
- first_name: René
full_name: Fahr, René
id: '111'
last_name: Fahr
- first_name: Patricia
full_name: Arias Cabarcos, Patricia
id: '92804'
last_name: Arias Cabarcos
- first_name: Eric
full_name: Bodden, Eric
id: '59256'
last_name: Bodden
orcid: 0000-0003-3470-3647
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
citation:
ama: 'Pottebaum J, Rossel J, Somorovsky J, et al. Re-Envisioning Industrial Control
Systems Security by Considering Human Factors as a Core Element of Defense-in-Depth.
In: 2023 IEEE European Symposium on Security and Privacy Workshops (EuroS&PW).
IEEE; 2023:379-385. doi:10.1109/eurospw59978.2023.00048'
apa: Pottebaum, J., Rossel, J., Somorovsky, J., Acar, Y., Fahr, R., Arias Cabarcos,
P., Bodden, E., & Gräßler, I. (2023). Re-Envisioning Industrial Control Systems
Security by Considering Human Factors as a Core Element of Defense-in-Depth. 2023
IEEE European Symposium on Security and Privacy Workshops (EuroS&PW),
379–385. https://doi.org/10.1109/eurospw59978.2023.00048
bibtex: '@inproceedings{Pottebaum_Rossel_Somorovsky_Acar_Fahr_Arias Cabarcos_Bodden_Gräßler_2023,
title={Re-Envisioning Industrial Control Systems Security by Considering Human
Factors as a Core Element of Defense-in-Depth}, DOI={10.1109/eurospw59978.2023.00048},
booktitle={2023 IEEE European Symposium on Security and Privacy Workshops (EuroS&PW)},
publisher={IEEE}, author={Pottebaum, Jens and Rossel, Jost and Somorovsky, Juraj
and Acar, Yasemin and Fahr, René and Arias Cabarcos, Patricia and Bodden, Eric
and Gräßler, Iris}, year={2023}, pages={379–385} }'
chicago: Pottebaum, Jens, Jost Rossel, Juraj Somorovsky, Yasemin Acar, René Fahr,
Patricia Arias Cabarcos, Eric Bodden, and Iris Gräßler. “Re-Envisioning Industrial
Control Systems Security by Considering Human Factors as a Core Element of Defense-in-Depth.”
In 2023 IEEE European Symposium on Security and Privacy Workshops (EuroS&PW),
379–85. IEEE, 2023. https://doi.org/10.1109/eurospw59978.2023.00048.
ieee: 'J. Pottebaum et al., “Re-Envisioning Industrial Control Systems Security
by Considering Human Factors as a Core Element of Defense-in-Depth,” in 2023
IEEE European Symposium on Security and Privacy Workshops (EuroS&PW),
Delft, Netherlands, 2023, pp. 379–385, doi: 10.1109/eurospw59978.2023.00048.'
mla: Pottebaum, Jens, et al. “Re-Envisioning Industrial Control Systems Security
by Considering Human Factors as a Core Element of Defense-in-Depth.” 2023 IEEE
European Symposium on Security and Privacy Workshops (EuroS&PW), IEEE,
2023, pp. 379–85, doi:10.1109/eurospw59978.2023.00048.
short: 'J. Pottebaum, J. Rossel, J. Somorovsky, Y. Acar, R. Fahr, P. Arias Cabarcos,
E. Bodden, I. Gräßler, in: 2023 IEEE European Symposium on Security and Privacy
Workshops (EuroS&PW), IEEE, 2023, pp. 379–385.'
conference:
end_date: 2023-07-07
location: Delft, Netherlands
name: 2023 IEEE European Symposium on Security and Privacy Workshops (EuroS&PW)
start_date: 2023-07-03
date_created: 2023-08-15T12:21:05Z
date_updated: 2025-07-16T11:06:47Z
ddc:
- '000'
department:
- _id: '34'
- _id: '152'
- _id: '76'
- _id: '632'
- _id: '858'
doi: 10.1109/eurospw59978.2023.00048
file:
- access_level: closed
content_type: application/pdf
creator: jrossel
date_created: 2024-09-05T13:00:09Z
date_updated: 2024-09-05T13:00:09Z
file_id: '56077'
file_name: Re_envisioning_Industrial_Control_Systems_security.pdf
file_size: 197727
relation: main_file
file_date_updated: 2024-09-05T13:00:09Z
has_accepted_license: '1'
keyword:
- Defense-in-Depth
- Human Factors
- Production Engineering
- Product Design
- Systems Engineering
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/stamp/stamp.jsp?tp=&arnumber=10190647
page: 379-385
publication: 2023 IEEE European Symposium on Security and Privacy Workshops (EuroS&PW)
publication_status: published
publisher: IEEE
quality_controlled: '1'
status: public
title: Re-Envisioning Industrial Control Systems Security by Considering Human Factors
as a Core Element of Defense-in-Depth
type: conference
user_id: '58331'
year: '2023'
...
---
_id: '45360'
alternative_title:
- Implementation of optimized surface slitting for eddy current loss reduction on
the surface of an additively manufactured pemanent magnet rotor
author:
- first_name: Michael
full_name: Haase, Michael
id: '35970'
last_name: Haase
- first_name: Maximilian
full_name: Bieber, Maximilian
last_name: Bieber
- first_name: Frederik
full_name: Tasche, Frederik
last_name: Tasche
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Bernd
full_name: Ponik, Bernd
last_name: Ponik
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
citation:
ama: 'Haase M, Bieber M, Tasche F, et al. Umsetzung einer optimierten Oberflächenschlitzung
zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.
In: Kynast M, Eichmann M, Witt G, eds. Proceedings of the 19th Rapid.Tech 3D
Conference Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH & Co.
KG; 2023. doi:https://doi.org/10.3139/9783446479425.001
'
apa: Haase, M., Bieber, M., Tasche, F., Schaper, M., Hoyer, K.-P., Ponik, B., &
Magyar, B. (2023). Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion
auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors. In M. Kynast,
M. Eichmann, & G. Witt (Eds.), Proceedings of the 19th Rapid.Tech 3D Conference
Erfurt, Germany, 9–11 May 2023. Carl Hanser Verlag GmbH & Co. KG. https://doi.org/10.3139/9783446479425.001
bibtex: '@inbook{Haase_Bieber_Tasche_Schaper_Hoyer_Ponik_Magyar_2023, place={München},
title={Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion
auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors}, DOI={https://doi.org/10.3139/9783446479425.001
}, booktitle={Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany,
9–11 May 2023}, publisher={Carl Hanser Verlag GmbH & Co. KG}, author={Haase,
Michael and Bieber, Maximilian and Tasche, Frederik and Schaper, Mirko and Hoyer,
Kay-Peter and Ponik, Bernd and Magyar, Balázs}, editor={Kynast, Michael and Eichmann,
Michael and Witt, Gerd}, year={2023} }'
chicago: 'Haase, Michael, Maximilian Bieber, Frederik Tasche, Mirko Schaper, Kay-Peter
Hoyer, Bernd Ponik, and Balázs Magyar. “Umsetzung einer optimierten Oberflächenschlitzung
zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.”
In Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May
2023, edited by Michael Kynast, Michael Eichmann, and Gerd Witt. München:
Carl Hanser Verlag GmbH & Co. KG, 2023. https://doi.org/10.3139/9783446479425.001 .'
ieee: 'M. Haase et al., “Umsetzung einer optimierten Oberflächenschlitzung
zur Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors,”
in Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May
2023, M. Kynast, M. Eichmann, and G. Witt, Eds. München: Carl Hanser Verlag
GmbH & Co. KG, 2023.'
mla: Haase, Michael, et al. “Umsetzung einer optimierten Oberflächenschlitzung zur
Wirbelstromverlustreduktion auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors.”
Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11 May
2023, edited by Michael Kynast et al., Carl Hanser Verlag GmbH & Co. KG,
2023, doi:https://doi.org/10.3139/9783446479425.001
.
short: 'M. Haase, M. Bieber, F. Tasche, M. Schaper, K.-P. Hoyer, B. Ponik, B. Magyar,
in: M. Kynast, M. Eichmann, G. Witt (Eds.), Proceedings of the 19th Rapid.Tech
3D Conference Erfurt, Germany, 9–11 May 2023, Carl Hanser Verlag GmbH & Co.
KG, München, 2023.'
date_created: 2023-05-30T05:55:15Z
date_updated: 2025-08-29T09:19:53Z
department:
- _id: '146'
- _id: '219'
- _id: '158'
doi: 'https://doi.org/10.3139/9783446479425.001 '
editor:
- first_name: Michael
full_name: Kynast, Michael
last_name: Kynast
- first_name: Michael
full_name: Eichmann, Michael
last_name: Eichmann
- first_name: Gerd
full_name: Witt, Gerd
last_name: Witt
language:
- iso: ger
place: München
popular_science: '1'
publication: Proceedings of the 19th Rapid.Tech 3D Conference Erfurt, Germany, 9–11
May 2023
publication_identifier:
eisbn:
- 978-3-446-47942-5
isbn:
- 978-3-446-47941-8
publication_status: published
publisher: Carl Hanser Verlag GmbH & Co. KG
status: public
title: Umsetzung einer optimierten Oberflächenschlitzung zur Wirbelstromverlustreduktion
auf der Oberfläche eines additiv gefertigten Permanentmagnet-Rotors
type: book_chapter
user_id: '35970'
year: '2023'
...
---
_id: '52427'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: Schlüter A. 2050 - The Future Podcast, Folge The Energy Systems of the Future.
Marcus Nettelbeck; 2023.
apa: Schlüter, A. (2023). 2050 - The Future Podcast, Folge The Energy Systems
of the Future. Marcus Nettelbeck.
bibtex: '@book{Schlüter_2023, title={2050 - The Future Podcast, Folge The Energy
Systems of the Future}, publisher={Marcus Nettelbeck}, author={Schlüter, Alexander},
year={2023} }'
chicago: Schlüter, Alexander. 2050 - The Future Podcast, Folge The Energy Systems
of the Future. Marcus Nettelbeck, 2023.
ieee: A. Schlüter, 2050 - The Future Podcast, Folge The Energy Systems of the
Future. Marcus Nettelbeck, 2023.
mla: Schlüter, Alexander. 2050 - The Future Podcast, Folge The Energy Systems
of the Future. Marcus Nettelbeck, 2023.
short: A. Schlüter, 2050 - The Future Podcast, Folge The Energy Systems of the Future,
Marcus Nettelbeck, 2023.
date_created: 2024-03-10T08:07:40Z
date_updated: 2026-03-10T12:35:44Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: eng
publication_status: published
publisher: Marcus Nettelbeck
status: public
title: 2050 - The Future Podcast, Folge The Energy Systems of the Future
type: misc
user_id: '14972'
year: '2023'
...