---
_id: '14826'
abstract:
- lang: eng
  text: In this paper, we present Hitachi and Paderborn University’s joint effort
    for automatic speech recognition (ASR) in a dinner party scenario. The main challenges
    of ASR systems for dinner party recordings obtained by multiple microphone arrays
    are (1) heavy speech overlaps, (2) severe noise and reverberation, (3) very natural
    onversational content, and possibly (4) insufficient training data. As an example
    of a dinner party scenario, we have chosen the data presented during the CHiME-5
    speech recognition challenge, where the baseline ASR had a 73.3% word error rate
    (WER), and even the best performing system at the CHiME-5 challenge had a 46.1%
    WER. We extensively investigated a combination of the guided source separation-based
    speech enhancement technique and an already proposed strong ASR backend and found
    that a tight combination of these techniques provided substantial accuracy improvements.
    Our final system achieved WERs of 39.94% and 41.64% for the development and evaluation
    data, respectively, both of which are the best published results for the dataset.
    We also investigated with additional training data on the official small data
    in the CHiME-5 corpus to assess the intrinsic difficulty of this ASR task.
author:
- first_name: Naoyuki
  full_name: Kanda, Naoyuki
  last_name: Kanda
- first_name: Christoph
  full_name: Boeddeker, Christoph
  id: '40767'
  last_name: Boeddeker
- first_name: Jens
  full_name: Heitkaemper, Jens
  id: '27643'
  last_name: Heitkaemper
- first_name: Yusuke
  full_name: Fujita, Yusuke
  last_name: Fujita
- first_name: Shota
  full_name: Horiguchi, Shota
  last_name: Horiguchi
- first_name: Reinhold
  full_name: Haeb-Umbach, Reinhold
  id: '242'
  last_name: Haeb-Umbach
citation:
  ama: 'Kanda N, Boeddeker C, Heitkaemper J, Fujita Y, Horiguchi S, Haeb-Umbach R.
    Guided Source Separation Meets a Strong ASR Backend: Hitachi/Paderborn University
    Joint Investigation for Dinner Party ASR. In: <i>INTERSPEECH 2019, Graz, Austria</i>.
    ; 2019.'
  apa: 'Kanda, N., Boeddeker, C., Heitkaemper, J., Fujita, Y., Horiguchi, S., &#38;
    Haeb-Umbach, R. (2019). Guided Source Separation Meets a Strong ASR Backend: Hitachi/Paderborn
    University Joint Investigation for Dinner Party ASR. In <i>INTERSPEECH 2019, Graz,
    Austria</i>.'
  bibtex: '@inproceedings{Kanda_Boeddeker_Heitkaemper_Fujita_Horiguchi_Haeb-Umbach_2019,
    title={Guided Source Separation Meets a Strong ASR Backend: Hitachi/Paderborn
    University Joint Investigation for Dinner Party ASR}, booktitle={INTERSPEECH 2019,
    Graz, Austria}, author={Kanda, Naoyuki and Boeddeker, Christoph and Heitkaemper,
    Jens and Fujita, Yusuke and Horiguchi, Shota and Haeb-Umbach, Reinhold}, year={2019}
    }'
  chicago: 'Kanda, Naoyuki, Christoph Boeddeker, Jens Heitkaemper, Yusuke Fujita,
    Shota Horiguchi, and Reinhold Haeb-Umbach. “Guided Source Separation Meets a Strong
    ASR Backend: Hitachi/Paderborn University Joint Investigation for Dinner Party
    ASR.” In <i>INTERSPEECH 2019, Graz, Austria</i>, 2019.'
  ieee: 'N. Kanda, C. Boeddeker, J. Heitkaemper, Y. Fujita, S. Horiguchi, and R. Haeb-Umbach,
    “Guided Source Separation Meets a Strong ASR Backend: Hitachi/Paderborn University
    Joint Investigation for Dinner Party ASR,” in <i>INTERSPEECH 2019, Graz, Austria</i>,
    2019.'
  mla: 'Kanda, Naoyuki, et al. “Guided Source Separation Meets a Strong ASR Backend:
    Hitachi/Paderborn University Joint Investigation for Dinner Party ASR.” <i>INTERSPEECH
    2019, Graz, Austria</i>, 2019.'
  short: 'N. Kanda, C. Boeddeker, J. Heitkaemper, Y. Fujita, S. Horiguchi, R. Haeb-Umbach,
    in: INTERSPEECH 2019, Graz, Austria, 2019.'
date_created: 2019-11-06T10:08:49Z
date_updated: 2022-01-06T06:52:07Z
ddc:
- '000'
department:
- _id: '54'
file:
- access_level: open_access
  content_type: application/pdf
  creator: huesera
  date_created: 2019-11-06T10:10:23Z
  date_updated: 2019-11-08T07:45:15Z
  file_id: '14827'
  file_name: INTERSPEECH_2019_Boeddeker_Paper.pdf
  file_size: 216202
  relation: main_file
file_date_updated: 2019-11-08T07:45:15Z
has_accepted_license: '1'
language:
- iso: eng
oa: '1'
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: INTERSPEECH 2019, Graz, Austria
status: public
title: 'Guided Source Separation Meets a Strong ASR Backend: Hitachi/Paderborn University
  Joint Investigation for Dinner Party ASR'
type: conference
user_id: '59789'
year: '2019'
...
---
_id: '14829'
citation:
  ama: Scheideler C, Berenbrink P, eds. <i>The 31st ACM Symposium on Parallelism in
    Algorithms and Architectures, SPAA 2019, Phoenix, AZ, USA, June 22-24, 2019</i>.
    ACM; 2019. doi:<a href="https://doi.org/10.1145/3323165">10.1145/3323165</a>
  apa: Scheideler, C., &#38; Berenbrink, P. (Eds.). (2019). <i>The 31st ACM Symposium
    on Parallelism in Algorithms and Architectures, SPAA 2019, Phoenix, AZ, USA, June
    22-24, 2019</i>. ACM. <a href="https://doi.org/10.1145/3323165">https://doi.org/10.1145/3323165</a>
  bibtex: '@book{Scheideler_Berenbrink_2019, title={The 31st ACM Symposium on Parallelism
    in Algorithms and Architectures, SPAA 2019, Phoenix, AZ, USA, June 22-24, 2019},
    DOI={<a href="https://doi.org/10.1145/3323165">10.1145/3323165</a>}, publisher={ACM},
    year={2019} }'
  chicago: Scheideler, Christian, and Petra Berenbrink, eds. <i>The 31st ACM Symposium
    on Parallelism in Algorithms and Architectures, SPAA 2019, Phoenix, AZ, USA, June
    22-24, 2019</i>. ACM, 2019. <a href="https://doi.org/10.1145/3323165">https://doi.org/10.1145/3323165</a>.
  ieee: C. Scheideler and P. Berenbrink, Eds., <i>The 31st ACM Symposium on Parallelism
    in Algorithms and Architectures, SPAA 2019, Phoenix, AZ, USA, June 22-24, 2019</i>.
    ACM, 2019.
  mla: Scheideler, Christian, and Petra Berenbrink, editors. <i>The 31st ACM Symposium
    on Parallelism in Algorithms and Architectures, SPAA 2019, Phoenix, AZ, USA, June
    22-24, 2019</i>. ACM, 2019, doi:<a href="https://doi.org/10.1145/3323165">10.1145/3323165</a>.
  short: C. Scheideler, P. Berenbrink, eds., The 31st ACM Symposium on Parallelism
    in Algorithms and Architectures, SPAA 2019, Phoenix, AZ, USA, June 22-24, 2019,
    ACM, 2019.
date_created: 2019-11-06T10:43:41Z
date_updated: 2022-01-06T06:52:07Z
department:
- _id: '79'
doi: 10.1145/3323165
editor:
- first_name: Christian
  full_name: Scheideler, Christian
  id: '20792'
  last_name: Scheideler
- first_name: Petra
  full_name: Berenbrink, Petra
  last_name: Berenbrink
language:
- iso: eng
project:
- _id: '1'
  name: SFB 901
- _id: '2'
  name: SFB 901 - Project Area A
- _id: '5'
  name: SFB 901 - Subproject A1
publication_identifier:
  isbn:
  - 978-1-4503-6184-2
publisher: ACM
status: public
title: The 31st ACM Symposium on Parallelism in Algorithms and Architectures, SPAA
  2019, Phoenix, AZ, USA, June 22-24, 2019
type: conference_editor
user_id: '477'
year: '2019'
...
---
_id: '15002'
abstract:
- lang: eng
  text: Many problem settings in machine learning are concerned with the simultaneous
    prediction of multiple target variables of diverse type. Amongst others, such
    problem settings arise in multivariate regression, multi-label classification,
    multi-task learning, dyadic prediction, zero-shot learning, network inference,
    and matrix completion. These subfields of machine learning are typically studied
    in isolation, without highlighting or exploring important relationships. In this
    paper, we present a unifying view on what we call multi-target prediction (MTP)
    problems and methods. First, we formally discuss commonalities and differences
    between existing MTP problems. To this end, we introduce a general framework that
    covers the above subfields as special cases. As a second contribution, we provide
    a structured overview of MTP methods. This is accomplished by identifying a number
    of key properties, which distinguish such methods and determine their suitability
    for different types of problems. Finally, we also discuss a few challenges for
    future research.
author:
- first_name: Willem
  full_name: Waegeman, Willem
  last_name: Waegeman
- first_name: Krzysztof
  full_name: Dembczynski, Krzysztof
  last_name: Dembczynski
- first_name: Eyke
  full_name: Hüllermeier, Eyke
  id: '48129'
  last_name: Hüllermeier
citation:
  ama: 'Waegeman W, Dembczynski K, Hüllermeier E. Multi-target prediction: a unifying
    view on problems and methods. <i>Data Mining and Knowledge Discovery</i>. 2019;33(2):293-324.
    doi:<a href="https://doi.org/10.1007/s10618-018-0595-5">10.1007/s10618-018-0595-5</a>'
  apa: 'Waegeman, W., Dembczynski, K., &#38; Hüllermeier, E. (2019). Multi-target
    prediction: a unifying view on problems and methods. <i>Data Mining and Knowledge
    Discovery</i>, <i>33</i>(2), 293–324. <a href="https://doi.org/10.1007/s10618-018-0595-5">https://doi.org/10.1007/s10618-018-0595-5</a>'
  bibtex: '@article{Waegeman_Dembczynski_Hüllermeier_2019, title={Multi-target prediction:
    a unifying view on problems and methods}, volume={33}, DOI={<a href="https://doi.org/10.1007/s10618-018-0595-5">10.1007/s10618-018-0595-5</a>},
    number={2}, journal={Data Mining and Knowledge Discovery}, author={Waegeman, Willem
    and Dembczynski, Krzysztof and Hüllermeier, Eyke}, year={2019}, pages={293–324}
    }'
  chicago: 'Waegeman, Willem, Krzysztof Dembczynski, and Eyke Hüllermeier. “Multi-Target
    Prediction: A Unifying View on Problems and Methods.” <i>Data Mining and Knowledge
    Discovery</i> 33, no. 2 (2019): 293–324. <a href="https://doi.org/10.1007/s10618-018-0595-5">https://doi.org/10.1007/s10618-018-0595-5</a>.'
  ieee: 'W. Waegeman, K. Dembczynski, and E. Hüllermeier, “Multi-target prediction:
    a unifying view on problems and methods,” <i>Data Mining and Knowledge Discovery</i>,
    vol. 33, no. 2, pp. 293–324, 2019.'
  mla: 'Waegeman, Willem, et al. “Multi-Target Prediction: A Unifying View on Problems
    and Methods.” <i>Data Mining and Knowledge Discovery</i>, vol. 33, no. 2, 2019,
    pp. 293–324, doi:<a href="https://doi.org/10.1007/s10618-018-0595-5">10.1007/s10618-018-0595-5</a>.'
  short: W. Waegeman, K. Dembczynski, E. Hüllermeier, Data Mining and Knowledge Discovery
    33 (2019) 293–324.
date_created: 2019-11-15T10:16:34Z
date_updated: 2022-01-06T06:52:14Z
ddc:
- '000'
department:
- _id: '34'
- _id: '355'
doi: 10.1007/s10618-018-0595-5
file:
- access_level: open_access
  content_type: application/pdf
  creator: lettmann
  date_created: 2020-02-28T12:43:39Z
  date_updated: 2020-02-28T12:45:26Z
  file_id: '16155'
  file_name: multi-target-prediction.pdf
  file_size: 837808
  relation: main_file
file_date_updated: 2020-02-28T12:45:26Z
has_accepted_license: '1'
intvolume: '        33'
issue: '2'
language:
- iso: eng
oa: '1'
page: 293-324
publication: Data Mining and Knowledge Discovery
publication_identifier:
  issn:
  - 1573-756X
status: public
title: 'Multi-target prediction: a unifying view on problems and methods'
type: journal_article
user_id: '315'
volume: 33
year: '2019'
...
---
_id: '15028'
abstract:
- lang: eng
  text: "Friction-spinning is an incremental forming process, which is accompanied
    by complex thermal and mechanical loads in the tool and the formed part. To influence
    the process temperature, two main process parameters, i.e. the rotation speed
    and the feed rate, can be adapted. With the objective to improve the tool performance
    and the quality of the workpiece, this study focuses on a coating concept for
    friction-spinning tools made of high speed steel (HS6 5 2C, 1.3343). On the one
    hand, atmospheric plasma sprayed (APS) Al2O3 and ZrO2-8Y2O3 coatings serve as
    a thermal insulator, and, on the other hand, physically vapor deposited (PVD)
    TiAlSi7.9N and CrAlSi7.5N films are applied to increase the hardness and wear
    resistance of the tools. In addition, duplex coatings, combining the APS and PVD
    technique, are synthesized to influence both the heat transfer and the tribological
    properties of friction-spinning tools.\r\nSubsequently, all coated tools are tested
    in a friction-spinning process to form flanges made of AW-6060 (AlMgSi   3.3206)
    tube materials. The tool temperatures are determined in-situ to investigate the
    impact of the tool coating on the process temperature. Compared to an uncoated
    tool, the alumina and zirconia coatings contribute to a reduction of the tool
    temperature by up to half, while the PVD films increase the hardness of the tool
    by 20 GPa. Furthermore, it is shown that the surface quality of thermally sprayed
    (TS) or PVD coated tools is directly related to the surface roughness of the resulting
    workpiece.\r\n"
author:
- first_name: Wolfgang
  full_name: Tillmann, Wolfgang
  last_name: Tillmann
- first_name: Alexander
  full_name: Fehr, Alexander
  last_name: Fehr
- first_name: Dominic
  full_name: Stangier, Dominic
  last_name: Stangier
- first_name: Markus
  full_name: Dildrop, Markus
  last_name: Dildrop
- first_name: Werner
  full_name: Homberg, Werner
  last_name: Homberg
- first_name: Benjamin
  full_name: Lossen, Benjamin
  last_name: Lossen
- first_name: Dina
  full_name: Hijazi, Dina
  id: '70700'
  last_name: Hijazi
citation:
  ama: Tillmann W, Fehr A, Stangier D, et al. Al2O3/ZrO2-8Y2O3 and (Cr,Ti)AlSiN tool
    coatings to influence the temperature and surface quality in friction-spinning
    processes. <i>Production Engineering</i>. 2019:449-457. doi:<a href="https://doi.org/10.1007/s11740-019-00899-y">10.1007/s11740-019-00899-y</a>
  apa: Tillmann, W., Fehr, A., Stangier, D., Dildrop, M., Homberg, W., Lossen, B.,
    &#38; Hijazi, D. (2019). Al2O3/ZrO2-8Y2O3 and (Cr,Ti)AlSiN tool coatings to influence
    the temperature and surface quality in friction-spinning processes. <i>Production
    Engineering</i>, 449–457. <a href="https://doi.org/10.1007/s11740-019-00899-y">https://doi.org/10.1007/s11740-019-00899-y</a>
  bibtex: '@article{Tillmann_Fehr_Stangier_Dildrop_Homberg_Lossen_Hijazi_2019, title={Al2O3/ZrO2-8Y2O3
    and (Cr,Ti)AlSiN tool coatings to influence the temperature and surface quality
    in friction-spinning processes}, DOI={<a href="https://doi.org/10.1007/s11740-019-00899-y">10.1007/s11740-019-00899-y</a>},
    journal={Production Engineering}, author={Tillmann, Wolfgang and Fehr, Alexander
    and Stangier, Dominic and Dildrop, Markus and Homberg, Werner and Lossen, Benjamin
    and Hijazi, Dina}, year={2019}, pages={449–457} }'
  chicago: Tillmann, Wolfgang, Alexander Fehr, Dominic Stangier, Markus Dildrop, Werner
    Homberg, Benjamin Lossen, and Dina Hijazi. “Al2O3/ZrO2-8Y2O3 and (Cr,Ti)AlSiN
    Tool Coatings to Influence the Temperature and Surface Quality in Friction-Spinning
    Processes.” <i>Production Engineering</i>, 2019, 449–57. <a href="https://doi.org/10.1007/s11740-019-00899-y">https://doi.org/10.1007/s11740-019-00899-y</a>.
  ieee: W. Tillmann <i>et al.</i>, “Al2O3/ZrO2-8Y2O3 and (Cr,Ti)AlSiN tool coatings
    to influence the temperature and surface quality in friction-spinning processes,”
    <i>Production Engineering</i>, pp. 449–457, 2019.
  mla: Tillmann, Wolfgang, et al. “Al2O3/ZrO2-8Y2O3 and (Cr,Ti)AlSiN Tool Coatings
    to Influence the Temperature and Surface Quality in Friction-Spinning Processes.”
    <i>Production Engineering</i>, 2019, pp. 449–57, doi:<a href="https://doi.org/10.1007/s11740-019-00899-y">10.1007/s11740-019-00899-y</a>.
  short: W. Tillmann, A. Fehr, D. Stangier, M. Dildrop, W. Homberg, B. Lossen, D.
    Hijazi, Production Engineering (2019) 449–457.
date_created: 2019-11-19T08:03:43Z
date_updated: 2022-01-06T06:52:15Z
doi: 10.1007/s11740-019-00899-y
language:
- iso: eng
page: 449-457
publication: Production Engineering
publication_identifier:
  issn:
  - 0944-6524
  - 1863-7353
publication_status: published
status: public
title: Al2O3/ZrO2-8Y2O3 and (Cr,Ti)AlSiN tool coatings to influence the temperature
  and surface quality in friction-spinning processes
type: journal_article
user_id: '70700'
year: '2019'
...
---
_id: '15030'
abstract:
- lang: eng
  text: Working-media-based forming processes (WMBF) represent a great potential regarding
    the production of complex sheet-metal lightweight components with excellent surface
    quality, shape accuracy and dimensional stability. The working-media-based forming
    processes characterize the sheet-metal forming process, where the sheet metal
    blank is formed during the forming process by means of a (quasi-)static or dynamic
    working media pressure into a contouring forming tool. Although the WMBF offers
    improved utilization of the formability of the used materials compared to conventional
    sheet metal forming processes, there are limits in the production of complex deeper
    or sharp edged components with (quasi-)static and dynamic WMBF processes, which
    can not be overcome by using these methods alone. In order to overcome this, multi-level
    WMBF process sequences for components with spherical and stepped geometries are
    developed in this work. Here the developed strategies combine the advantages of
    (quasi-)static and dynamic WMBF processes. Furthermore, based on analytical, experimental
    and numerical investigations, innovative process management strategies were derived,
    which completely compensate the local wall thickness changes, make better use
    of existing material resources and thus enable the safe production of mentioned
    geometries.
author:
- first_name: Eugen
  full_name: Djakow, Eugen
  id: '7904'
  last_name: Djakow
citation:
  ama: 'Djakow E. <i>Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
    Umformung von blechförmigen Halbzeugen</i>. Düren: Shaker; 2019. doi:<a href="https://doi.org/ISBN
    978-3-8440-6723-1">ISBN 978-3-8440-6723-1</a>'
  apa: 'Djakow, E. (2019). <i>Ein Beitrag zur kombinierten (quasi-)statischen und
    dynamischen Umformung von blechförmigen Halbzeugen</i>. Düren: Shaker. <a href="https://doi.org/ISBN
    978-3-8440-6723-1">https://doi.org/ISBN 978-3-8440-6723-1</a>'
  bibtex: '@book{Djakow_2019, place={Düren}, series={Paderborner Umformtechnik}, title={Ein
    Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von blechförmigen
    Halbzeugen}, DOI={<a href="https://doi.org/ISBN 978-3-8440-6723-1">ISBN 978-3-8440-6723-1</a>},
    publisher={Shaker}, author={Djakow, Eugen}, year={2019}, collection={Paderborner
    Umformtechnik} }'
  chicago: 'Djakow, Eugen. <i>Ein Beitrag zur kombinierten (quasi-)statischen und
    dynamischen Umformung von blechförmigen Halbzeugen</i>. Paderborner Umformtechnik.
    Düren: Shaker, 2019. <a href="https://doi.org/ISBN 978-3-8440-6723-1">https://doi.org/ISBN
    978-3-8440-6723-1</a>.'
  ieee: 'E. Djakow, <i>Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
    Umformung von blechförmigen Halbzeugen</i>. Düren: Shaker, 2019.'
  mla: Djakow, Eugen. <i>Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
    Umformung von blechförmigen Halbzeugen</i>. Shaker, 2019, doi:<a href="https://doi.org/ISBN
    978-3-8440-6723-1">ISBN 978-3-8440-6723-1</a>.
  short: E. Djakow, Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen
    Umformung von blechförmigen Halbzeugen, Shaker, Düren, 2019.
date_created: 2019-11-19T08:20:19Z
date_updated: 2022-01-06T06:52:15Z
doi: ISBN 978-3-8440-6723-1
keyword:
- High Speed Forming
language:
- iso: ger
page: '188'
place: Düren
publication_identifier:
  unknown:
  - ISBN 978-3-8440-6723-1
publication_status: published
publisher: Shaker
series_title: Paderborner Umformtechnik
status: public
title: Ein Beitrag zur kombinierten (quasi-)statischen und dynamischen Umformung von
  blechförmigen Halbzeugen
type: dissertation
user_id: '7904'
year: '2019'
...
---
_id: '13873'
article_number: '14'
author:
- first_name: Björn
  full_name: Feldkord, Björn
  id: '22704'
  last_name: Feldkord
- first_name: Friedhelm
  full_name: Meyer auf der Heide, Friedhelm
  id: '15523'
  last_name: Meyer auf der Heide
citation:
  ama: Feldkord B, Meyer auf der Heide F. The Mobile Server Problem. <i>ACM Transactions
    on Parallel Computing (TOPC)</i>. 2019;6(3). doi:<a href="https://doi.org/10.1145/3364204">10.1145/3364204</a>
  apa: Feldkord, B., &#38; Meyer auf der Heide, F. (2019). The Mobile Server Problem.
    <i>ACM Transactions on Parallel Computing (TOPC)</i>, <i>6</i>(3). <a href="https://doi.org/10.1145/3364204">https://doi.org/10.1145/3364204</a>
  bibtex: '@article{Feldkord_Meyer auf der Heide_2019, title={The Mobile Server Problem},
    volume={6}, DOI={<a href="https://doi.org/10.1145/3364204">10.1145/3364204</a>},
    number={314}, journal={ACM Transactions on Parallel Computing (TOPC)}, author={Feldkord,
    Björn and Meyer auf der Heide, Friedhelm}, year={2019} }'
  chicago: Feldkord, Björn, and Friedhelm Meyer auf der Heide. “The Mobile Server
    Problem.” <i>ACM Transactions on Parallel Computing (TOPC)</i> 6, no. 3 (2019).
    <a href="https://doi.org/10.1145/3364204">https://doi.org/10.1145/3364204</a>.
  ieee: B. Feldkord and F. Meyer auf der Heide, “The Mobile Server Problem,” <i>ACM
    Transactions on Parallel Computing (TOPC)</i>, vol. 6, no. 3, 2019.
  mla: Feldkord, Björn, and Friedhelm Meyer auf der Heide. “The Mobile Server Problem.”
    <i>ACM Transactions on Parallel Computing (TOPC)</i>, vol. 6, no. 3, 14, 2019,
    doi:<a href="https://doi.org/10.1145/3364204">10.1145/3364204</a>.
  short: B. Feldkord, F. Meyer auf der Heide, ACM Transactions on Parallel Computing
    (TOPC) 6 (2019).
date_created: 2019-10-16T07:06:22Z
date_updated: 2022-01-06T06:51:46Z
ddc:
- '000'
department:
- _id: '63'
doi: 10.1145/3364204
file:
- access_level: closed
  content_type: application/pdf
  creator: florida
  date_created: 2020-01-24T08:12:58Z
  date_updated: 2020-01-24T08:12:58Z
  file_id: '15632'
  file_name: DissertationFeldkord.pdf
  file_size: 633652
  relation: main_file
  success: 1
file_date_updated: 2020-01-24T08:12:58Z
has_accepted_license: '1'
intvolume: '         6'
issue: '3'
language:
- iso: eng
project:
- _id: '1'
  name: SFB 901
- _id: '2'
  name: SFB 901 - Project Area A
- _id: '5'
  name: SFB 901 - Subproject A1
publication: ACM Transactions on Parallel Computing (TOPC)
publication_status: published
status: public
title: The Mobile Server Problem
type: journal_article
user_id: '15504'
volume: 6
year: '2019'
...
---
_id: '13942'
author:
- first_name: Christine
  full_name: Markarian, Christine
  id: '37612'
  last_name: Markarian
- first_name: Friedhelm
  full_name: Meyer auf der Heide, Friedhelm
  id: '15523'
  last_name: Meyer auf der Heide
citation:
  ama: 'Markarian C, Meyer auf der Heide F. Online Algorithms for Leasing Vertex Cover
    and Leasing Non-metric Facility Location. In: <i>Proceedings of the 8th International
    Conference on Operations Research and Enterprise Systems</i>. SciTePress; 2019:315-321.
    doi:<a href="https://doi.org/10.5220/0007369503150321">10.5220/0007369503150321</a>'
  apa: Markarian, C., &#38; Meyer auf der Heide, F. (2019). Online Algorithms for
    Leasing Vertex Cover and Leasing Non-metric Facility Location. In <i>Proceedings
    of the 8th International Conference on Operations Research and Enterprise Systems</i>
    (pp. 315–321). SciTePress. <a href="https://doi.org/10.5220/0007369503150321">https://doi.org/10.5220/0007369503150321</a>
  bibtex: '@inproceedings{Markarian_Meyer auf der Heide_2019, title={Online Algorithms
    for Leasing Vertex Cover and Leasing Non-metric Facility Location}, DOI={<a href="https://doi.org/10.5220/0007369503150321">10.5220/0007369503150321</a>},
    booktitle={Proceedings of the 8th International Conference on Operations Research
    and Enterprise Systems}, publisher={SciTePress}, author={Markarian, Christine
    and Meyer auf der Heide, Friedhelm}, year={2019}, pages={315–321} }'
  chicago: Markarian, Christine, and Friedhelm Meyer auf der Heide. “Online Algorithms
    for Leasing Vertex Cover and Leasing Non-Metric Facility Location.” In <i>Proceedings
    of the 8th International Conference on Operations Research and Enterprise Systems</i>,
    315–21. SciTePress, 2019. <a href="https://doi.org/10.5220/0007369503150321">https://doi.org/10.5220/0007369503150321</a>.
  ieee: C. Markarian and F. Meyer auf der Heide, “Online Algorithms for Leasing Vertex
    Cover and Leasing Non-metric Facility Location,” in <i>Proceedings of the 8th
    International Conference on Operations Research and Enterprise Systems</i>, 2019,
    pp. 315–321.
  mla: Markarian, Christine, and Friedhelm Meyer auf der Heide. “Online Algorithms
    for Leasing Vertex Cover and Leasing Non-Metric Facility Location.” <i>Proceedings
    of the 8th International Conference on Operations Research and Enterprise Systems</i>,
    SciTePress, 2019, pp. 315–21, doi:<a href="https://doi.org/10.5220/0007369503150321">10.5220/0007369503150321</a>.
  short: 'C. Markarian, F. Meyer auf der Heide, in: Proceedings of the 8th International
    Conference on Operations Research and Enterprise Systems, SciTePress, 2019, pp.
    315–321.'
date_created: 2019-10-21T13:42:50Z
date_updated: 2022-01-06T06:51:47Z
department:
- _id: '63'
doi: 10.5220/0007369503150321
language:
- iso: eng
page: 315-321
project:
- _id: '1'
  name: SFB 901
- _id: '2'
  name: SFB 901 - Project Area A
- _id: '5'
  name: SFB 901 - Subproject A1
publication: Proceedings of the 8th International Conference on Operations Research
  and Enterprise Systems
publisher: SciTePress
status: public
title: Online Algorithms for Leasing Vertex Cover and Leasing Non-metric Facility
  Location
type: conference
user_id: '477'
year: '2019'
...
---
_id: '13946'
author:
- first_name: Faisal N.
  full_name: Abu-Khzam, Faisal N.
  last_name: Abu-Khzam
- first_name: Shouwei
  full_name: Li, Shouwei
  last_name: Li
- first_name: Christine
  full_name: Markarian, Christine
  id: '37612'
  last_name: Markarian
- first_name: Friedhelm
  full_name: Meyer auf der Heide, Friedhelm
  id: '15523'
  last_name: Meyer auf der Heide
- first_name: Pavel
  full_name: Podlipyan, Pavel
  last_name: Podlipyan
citation:
  ama: Abu-Khzam FN, Li S, Markarian C, Meyer auf der Heide F, Podlipyan P. Efficient
    parallel algorithms for parameterized problems. <i>Theoretical Computer Science</i>.
    2019;786:2-12. doi:<a href="https://doi.org/10.1016/j.tcs.2018.11.006">10.1016/j.tcs.2018.11.006</a>
  apa: Abu-Khzam, F. N., Li, S., Markarian, C., Meyer auf der Heide, F., &#38; Podlipyan,
    P. (2019). Efficient parallel algorithms for parameterized problems. <i>Theoretical
    Computer Science</i>, <i>786</i>, 2–12. <a href="https://doi.org/10.1016/j.tcs.2018.11.006">https://doi.org/10.1016/j.tcs.2018.11.006</a>
  bibtex: '@article{Abu-Khzam_Li_Markarian_Meyer auf der Heide_Podlipyan_2019, title={Efficient
    parallel algorithms for parameterized problems}, volume={786}, DOI={<a href="https://doi.org/10.1016/j.tcs.2018.11.006">10.1016/j.tcs.2018.11.006</a>},
    journal={Theoretical Computer Science}, author={Abu-Khzam, Faisal N. and Li, Shouwei
    and Markarian, Christine and Meyer auf der Heide, Friedhelm and Podlipyan, Pavel},
    year={2019}, pages={2–12} }'
  chicago: 'Abu-Khzam, Faisal N., Shouwei Li, Christine Markarian, Friedhelm Meyer
    auf der Heide, and Pavel Podlipyan. “Efficient Parallel Algorithms for Parameterized
    Problems.” <i>Theoretical Computer Science</i> 786 (2019): 2–12. <a href="https://doi.org/10.1016/j.tcs.2018.11.006">https://doi.org/10.1016/j.tcs.2018.11.006</a>.'
  ieee: F. N. Abu-Khzam, S. Li, C. Markarian, F. Meyer auf der Heide, and P. Podlipyan,
    “Efficient parallel algorithms for parameterized problems,” <i>Theoretical Computer
    Science</i>, vol. 786, pp. 2–12, 2019.
  mla: Abu-Khzam, Faisal N., et al. “Efficient Parallel Algorithms for Parameterized
    Problems.” <i>Theoretical Computer Science</i>, vol. 786, 2019, pp. 2–12, doi:<a
    href="https://doi.org/10.1016/j.tcs.2018.11.006">10.1016/j.tcs.2018.11.006</a>.
  short: F.N. Abu-Khzam, S. Li, C. Markarian, F. Meyer auf der Heide, P. Podlipyan,
    Theoretical Computer Science 786 (2019) 2–12.
date_created: 2019-10-21T13:57:06Z
date_updated: 2022-01-06T06:51:48Z
department:
- _id: '63'
doi: 10.1016/j.tcs.2018.11.006
intvolume: '       786'
language:
- iso: eng
page: 2-12
project:
- _id: '1'
  name: SFB 901
- _id: '5'
  name: SFB 901 - Subproject A1
- _id: '2'
  name: SFB 901 - Project Area A
publication: Theoretical Computer Science
status: public
title: Efficient parallel algorithms for parameterized problems
type: journal_article
user_id: '15415'
volume: 786
year: '2019'
...
---
_id: '13974'
author:
- first_name: Dieter
  full_name: Krimphove, Dieter
  id: '282'
  last_name: Krimphove
citation:
  ama: 'Krimphove D. AT 5 der MaComp: Zusammenarbeit mehrere Wertpapierdienstleistungsunternehmen.
    In: Krimphove D, Kruse O, eds. <i>Kommentar: MaComp - Mindestanforderungen an
    Die Compliance-Funktion Und Die Weiteren Verhaltens-, Organisations- Und Transparenzpflichten
    Nach §§ 63 Ff. WpHG Für Wertpapierdienstleistungsunternehmen</i>. 2nd ed. München:
    C. H. Beck; 2019:64-68.'
  apa: 'Krimphove, D. (2019). AT 5 der MaComp: Zusammenarbeit mehrere Wertpapierdienstleistungsunternehmen.
    In D. Krimphove &#38; O. Kruse (Eds.), <i>Kommentar: MaComp - Mindestanforderungen
    an die Compliance-Funktion und die weiteren Verhaltens-, Organisations- und Transparenzpflichten
    nach §§ 63 ff. WpHG für Wertpapierdienstleistungsunternehmen</i> (2nd ed., pp.
    64–68). München: C. H. Beck.'
  bibtex: '@inbook{Krimphove_2019, place={München}, edition={2}, title={AT 5 der MaComp:
    Zusammenarbeit mehrere Wertpapierdienstleistungsunternehmen}, booktitle={Kommentar:
    MaComp - Mindestanforderungen an die Compliance-Funktion und die weiteren Verhaltens-,
    Organisations- und Transparenzpflichten nach §§ 63 ff. WpHG für Wertpapierdienstleistungsunternehmen},
    publisher={C. H. Beck}, author={Krimphove, Dieter}, editor={Krimphove, Dieter
    and Kruse, OliverEditors}, year={2019}, pages={64–68} }'
  chicago: 'Krimphove, Dieter. “AT 5 Der MaComp: Zusammenarbeit Mehrere Wertpapierdienstleistungsunternehmen.”
    In <i>Kommentar: MaComp - Mindestanforderungen an Die Compliance-Funktion Und
    Die Weiteren Verhaltens-, Organisations- Und Transparenzpflichten Nach §§ 63 Ff.
    WpHG Für Wertpapierdienstleistungsunternehmen</i>, edited by Dieter Krimphove
    and Oliver Kruse, 2nd ed., 64–68. München: C. H. Beck, 2019.'
  ieee: 'D. Krimphove, “AT 5 der MaComp: Zusammenarbeit mehrere Wertpapierdienstleistungsunternehmen,”
    in <i>Kommentar: MaComp - Mindestanforderungen an die Compliance-Funktion und
    die weiteren Verhaltens-, Organisations- und Transparenzpflichten nach §§ 63 ff.
    WpHG für Wertpapierdienstleistungsunternehmen</i>, 2nd ed., D. Krimphove and O.
    Kruse, Eds. München: C. H. Beck, 2019, pp. 64–68.'
  mla: 'Krimphove, Dieter. “AT 5 Der MaComp: Zusammenarbeit Mehrere Wertpapierdienstleistungsunternehmen.”
    <i>Kommentar: MaComp - Mindestanforderungen an Die Compliance-Funktion Und Die
    Weiteren Verhaltens-, Organisations- Und Transparenzpflichten Nach §§ 63 Ff. WpHG
    Für Wertpapierdienstleistungsunternehmen</i>, edited by Dieter Krimphove and Oliver
    Kruse, 2nd ed., C. H. Beck, 2019, pp. 64–68.'
  short: 'D. Krimphove, in: D. Krimphove, O. Kruse (Eds.), Kommentar: MaComp - Mindestanforderungen
    an Die Compliance-Funktion Und Die Weiteren Verhaltens-, Organisations- Und Transparenzpflichten
    Nach §§ 63 Ff. WpHG Für Wertpapierdienstleistungsunternehmen, 2nd ed., C. H. Beck,
    München, 2019, pp. 64–68.'
date_created: 2019-10-22T14:05:41Z
date_updated: 2022-01-06T06:51:48Z
edition: '2'
editor:
- first_name: Dieter
  full_name: Krimphove, Dieter
  last_name: Krimphove
- first_name: Oliver
  full_name: Kruse, Oliver
  last_name: Kruse
language:
- iso: eng
page: 64-68
place: München
publication: 'Kommentar: MaComp - Mindestanforderungen an die Compliance-Funktion
  und die weiteren Verhaltens-, Organisations- und Transparenzpflichten nach §§ 63
  ff. WpHG für Wertpapierdienstleistungsunternehmen'
publisher: C. H. Beck
status: public
title: 'AT 5 der MaComp: Zusammenarbeit mehrere Wertpapierdienstleistungsunternehmen'
type: book_chapter
user_id: '282'
year: '2019'
...
---
_id: '14539'
author:
- first_name: Jannik
  full_name: Castenow, Jannik
  id: '38705'
  last_name: Castenow
- first_name: Christina
  full_name: Kolb, Christina
  id: '43647'
  last_name: Kolb
- first_name: Christian
  full_name: Scheideler, Christian
  id: '20792'
  last_name: Scheideler
citation:
  ama: 'Castenow J, Kolb C, Scheideler C. A Bounding Box Overlay for Competitive Routing
    in Hybrid Communication Networks. In: <i>Proceedings of the 26th International
    Colloquium on Structural Information and Communication Complexity (SIROCCO)</i>.
    ; 2019:345-348. doi:<a href="https://doi.org/10.1007/978-3-030-24922-9\_26">10.1007/978-3-030-24922-9\_26</a>'
  apa: Castenow, J., Kolb, C., &#38; Scheideler, C. (2019). A Bounding Box Overlay
    for Competitive Routing in Hybrid Communication Networks. In <i>Proceedings of
    the 26th International Colloquium on Structural Information and Communication
    Complexity (SIROCCO)</i> (pp. 345–348). L’Aquila, Italy. <a href="https://doi.org/10.1007/978-3-030-24922-9\_26">https://doi.org/10.1007/978-3-030-24922-9\_26</a>
  bibtex: '@inproceedings{Castenow_Kolb_Scheideler_2019, title={A Bounding Box Overlay
    for Competitive Routing in Hybrid Communication Networks}, DOI={<a href="https://doi.org/10.1007/978-3-030-24922-9\_26">10.1007/978-3-030-24922-9\_26</a>},
    booktitle={Proceedings of the 26th International Colloquium on Structural Information
    and Communication Complexity (SIROCCO)}, author={Castenow, Jannik and Kolb, Christina
    and Scheideler, Christian}, year={2019}, pages={345–348} }'
  chicago: Castenow, Jannik, Christina Kolb, and Christian Scheideler. “A Bounding
    Box Overlay for Competitive Routing in Hybrid Communication Networks.” In <i>Proceedings
    of the 26th International Colloquium on Structural Information and Communication
    Complexity (SIROCCO)</i>, 345–48, 2019. <a href="https://doi.org/10.1007/978-3-030-24922-9\_26">https://doi.org/10.1007/978-3-030-24922-9\_26</a>.
  ieee: J. Castenow, C. Kolb, and C. Scheideler, “A Bounding Box Overlay for Competitive
    Routing in Hybrid Communication Networks,” in <i>Proceedings of the 26th International
    Colloquium on Structural Information and Communication Complexity (SIROCCO)</i>,
    L’Aquila, Italy, 2019, pp. 345–348.
  mla: Castenow, Jannik, et al. “A Bounding Box Overlay for Competitive Routing in
    Hybrid Communication Networks.” <i>Proceedings of the 26th International Colloquium
    on Structural Information and Communication Complexity (SIROCCO)</i>, 2019, pp.
    345–48, doi:<a href="https://doi.org/10.1007/978-3-030-24922-9\_26">10.1007/978-3-030-24922-9\_26</a>.
  short: 'J. Castenow, C. Kolb, C. Scheideler, in: Proceedings of the 26th International
    Colloquium on Structural Information and Communication Complexity (SIROCCO), 2019,
    pp. 345–348.'
conference:
  end_date: 2019-07-04
  location: L'Aquila, Italy
  name: SIROCCO 2019
  start_date: 2019-07-01
date_created: 2019-11-04T10:09:35Z
date_updated: 2022-01-06T06:52:00Z
department:
- _id: '79'
- _id: '63'
doi: 10.1007/978-3-030-24922-9\_26
language:
- iso: eng
page: 345-348
project:
- _id: '1'
  name: SFB 901
- _id: '5'
  name: SFB 901 - Subproject A1
- _id: '2'
  name: SFB 901 - Project Area A
publication: Proceedings of the 26th International Colloquium on Structural Information
  and Communication Complexity (SIROCCO)
status: public
title: A Bounding Box Overlay for Competitive Routing in Hybrid Communication Networks
type: conference
user_id: '477'
year: '2019'
...
---
_id: '13182'
abstract:
- lang: eng
  text: "We consider congestion control in peer-to-peer distributed systems. \r\nThe
    problem can be reduced to the following scenario: Consider a set $V$ of $n$ peers
    (called \\emph{clients} in this paper) that want to send messages to a fixed common
    peer (called \\emph{server} in this paper).\r\nWe assume that each client $v \\in
    V$ sends a message with probability $p(v) \\in [0,1)$ and the server has a capacity
    of $\\sigma \\in \\mathbb{N}$, i.e., it can recieve at most $\\sigma$ messages
    per round and excess messages are dropped.\r\nThe server can modify these probabilities
    when clients send messages.\r\nIdeally, we wish to converge to a state with $\\sum
    p(v) = \\sigma$ and $p(v) = p(w)$ for all $v,w \\in V$.\t\r\n\r\nWe propose a
    \\emph{loosely} self-stabilizing protocol with a slightly relaxed legitimate state.
    \  \r\nOur protocol lets the system converge from \\emph{any} initial state to
    a state where $\\sum p(v) \\in \\left[\\sigma \\pm \\epsilon\\right]$ and $|p(v)-p(w)|
    \\in O(\\frac{1}{n})$. \r\nThis property is then maintained for $\\Omega(n^{\\mathfrak{c}})$
    rounds in expectation.\r\nIn particular, the initial client probabilities and
    server variables are not necessarily well-defined, i.e., they may have arbitrary
    values.\r\n\r\nOur protocol uses only $O(W + \\log n)$ bits of memory where $W$
    is length of node identifiers, making it very lightweight.\r\nFinally we state
    a lower bound on the convergence time an see that our protocol performs asymptotically
    optimal (up to some polylogarithmic factor).\r\n"
author:
- first_name: Michael
  full_name: Feldmann, Michael
  id: '23538'
  last_name: Feldmann
- first_name: Thorsten
  full_name: Götte, Thorsten
  id: '34727'
  last_name: Götte
- first_name: Christian
  full_name: Scheideler, Christian
  id: '20792'
  last_name: Scheideler
citation:
  ama: 'Feldmann M, Götte T, Scheideler C. A Loosely Self-stabilizing Protocol for
    Randomized Congestion Control with Logarithmic Memory. In: <i>Proceedings of the
    21st International Symposium on Stabilization, Safety, and Security of Distributed
    Systems (SSS)</i>. Lecture Notes in Computer Science. Springer, Cham; 2019:149-164.
    doi:<a href="https://doi.org/10.1007/978-3-030-34992-9_13">https://doi.org/10.1007/978-3-030-34992-9_13</a>'
  apa: Feldmann, M., Götte, T., &#38; Scheideler, C. (2019). A Loosely Self-stabilizing
    Protocol for Randomized Congestion Control with Logarithmic Memory. In <i>Proceedings
    of the 21st International Symposium on Stabilization, Safety, and Security of
    Distributed Systems (SSS)</i> (pp. 149–164). Springer, Cham. <a href="https://doi.org/10.1007/978-3-030-34992-9_13">https://doi.org/10.1007/978-3-030-34992-9_13</a>
  bibtex: '@inproceedings{Feldmann_Götte_Scheideler_2019, series={Lecture Notes in
    Computer Science}, title={A Loosely Self-stabilizing Protocol for Randomized Congestion
    Control with Logarithmic Memory}, DOI={<a href="https://doi.org/10.1007/978-3-030-34992-9_13">https://doi.org/10.1007/978-3-030-34992-9_13</a>},
    booktitle={Proceedings of the 21st International Symposium on Stabilization, Safety,
    and Security of Distributed Systems (SSS)}, publisher={Springer, Cham}, author={Feldmann,
    Michael and Götte, Thorsten and Scheideler, Christian}, year={2019}, pages={149–164},
    collection={Lecture Notes in Computer Science} }'
  chicago: Feldmann, Michael, Thorsten Götte, and Christian Scheideler. “A Loosely
    Self-Stabilizing Protocol for Randomized Congestion Control with Logarithmic Memory.”
    In <i>Proceedings of the 21st International Symposium on Stabilization, Safety,
    and Security of Distributed Systems (SSS)</i>, 149–64. Lecture Notes in Computer
    Science. Springer, Cham, 2019. <a href="https://doi.org/10.1007/978-3-030-34992-9_13">https://doi.org/10.1007/978-3-030-34992-9_13</a>.
  ieee: M. Feldmann, T. Götte, and C. Scheideler, “A Loosely Self-stabilizing Protocol
    for Randomized Congestion Control with Logarithmic Memory,” in <i>Proceedings
    of the 21st International Symposium on Stabilization, Safety, and Security of
    Distributed Systems (SSS)</i>, 2019, pp. 149–164.
  mla: Feldmann, Michael, et al. “A Loosely Self-Stabilizing Protocol for Randomized
    Congestion Control with Logarithmic Memory.” <i>Proceedings of the 21st International
    Symposium on Stabilization, Safety, and Security of Distributed Systems (SSS)</i>,
    Springer, Cham, 2019, pp. 149–64, doi:<a href="https://doi.org/10.1007/978-3-030-34992-9_13">https://doi.org/10.1007/978-3-030-34992-9_13</a>.
  short: 'M. Feldmann, T. Götte, C. Scheideler, in: Proceedings of the 21st International
    Symposium on Stabilization, Safety, and Security of Distributed Systems (SSS),
    Springer, Cham, 2019, pp. 149–164.'
date_created: 2019-09-10T12:48:33Z
date_updated: 2022-01-06T06:51:30Z
ddc:
- '000'
department:
- _id: '79'
doi: https://doi.org/10.1007/978-3-030-34992-9_13
external_id:
  arxiv:
  - '1909.04544'
file:
- access_level: closed
  content_type: application/pdf
  creator: mfeldma2
  date_created: 2019-09-11T11:20:16Z
  date_updated: 2019-09-11T11:20:16Z
  file_id: '13188'
  file_name: main.pdf
  file_size: 428908
  relation: main_file
  success: 1
file_date_updated: 2019-09-11T11:20:16Z
has_accepted_license: '1'
language:
- iso: eng
page: 149-164
project:
- _id: '2'
  name: SFB 901 - Project Area A
- _id: '5'
  name: SFB 901 - Subproject A1
- _id: '1'
  name: SFB 901
publication: Proceedings of the 21st International Symposium on Stabilization, Safety,
  and Security of Distributed Systems (SSS)
publisher: Springer, Cham
series_title: Lecture Notes in Computer Science
status: public
title: A Loosely Self-stabilizing Protocol for Randomized Congestion Control with
  Logarithmic Memory
type: conference
user_id: '23538'
year: '2019'
...
---
_id: '13237'
author:
- first_name: Hossam
  full_name: Elgabarty, Hossam
  last_name: Elgabarty
- first_name: Naveen Kumar
  full_name: Kaliannan, Naveen Kumar
  last_name: Kaliannan
- first_name: Thomas D.
  full_name: Kühne, Thomas D.
  last_name: Kühne
citation:
  ama: Elgabarty H, Kaliannan NK, Kühne TD. Enhancement of the asymmetry in the hydrogen
    bond network of liquid water by an ultrafast electric field pulse. <i>Scientific
    Reports</i>. 2019;9:10002. doi:<a href="https://doi.org/10.1038/s41598-019-46449-5">10.1038/s41598-019-46449-5</a>
  apa: Elgabarty, H., Kaliannan, N. K., &#38; Kühne, T. D. (2019). Enhancement of
    the asymmetry in the hydrogen bond network of liquid water by an ultrafast electric
    field pulse. <i>Scientific Reports</i>, <i>9</i>, 10002. <a href="https://doi.org/10.1038/s41598-019-46449-5">https://doi.org/10.1038/s41598-019-46449-5</a>
  bibtex: '@article{Elgabarty_Kaliannan_Kühne_2019, title={Enhancement of the asymmetry
    in the hydrogen bond network of liquid water by an ultrafast electric field pulse},
    volume={9}, DOI={<a href="https://doi.org/10.1038/s41598-019-46449-5">10.1038/s41598-019-46449-5</a>},
    journal={Scientific Reports}, author={Elgabarty, Hossam and Kaliannan, Naveen
    Kumar and Kühne, Thomas D.}, year={2019}, pages={10002} }'
  chicago: 'Elgabarty, Hossam, Naveen Kumar Kaliannan, and Thomas D. Kühne. “Enhancement
    of the Asymmetry in the Hydrogen Bond Network of Liquid Water by an Ultrafast
    Electric Field Pulse.” <i>Scientific Reports</i> 9 (2019): 10002. <a href="https://doi.org/10.1038/s41598-019-46449-5">https://doi.org/10.1038/s41598-019-46449-5</a>.'
  ieee: H. Elgabarty, N. K. Kaliannan, and T. D. Kühne, “Enhancement of the asymmetry
    in the hydrogen bond network of liquid water by an ultrafast electric field pulse,”
    <i>Scientific Reports</i>, vol. 9, p. 10002, 2019.
  mla: Elgabarty, Hossam, et al. “Enhancement of the Asymmetry in the Hydrogen Bond
    Network of Liquid Water by an Ultrafast Electric Field Pulse.” <i>Scientific Reports</i>,
    vol. 9, 2019, p. 10002, doi:<a href="https://doi.org/10.1038/s41598-019-46449-5">10.1038/s41598-019-46449-5</a>.
  short: H. Elgabarty, N.K. Kaliannan, T.D. Kühne, Scientific Reports 9 (2019) 10002.
date_created: 2019-09-16T10:48:03Z
date_updated: 2022-01-06T06:51:31Z
department:
- _id: '304'
doi: 10.1038/s41598-019-46449-5
language:
- iso: eng
page: '10002'
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Scientific Reports
publication_status: published
status: public
title: Enhancement of the asymmetry in the hydrogen bond network of liquid water by
  an ultrafast electric field pulse
type: journal_article
user_id: '71692'
volume: ' 9'
year: '2019'
...
---
_id: '13250'
author:
- first_name: Carlos
  full_name: Ansótegui, Carlos
  last_name: Ansótegui
- first_name: Britta
  full_name: Heymann, Britta
  last_name: Heymann
- first_name: Josep
  full_name: Pon, Josep
  last_name: Pon
- first_name: Meinolf
  full_name: Sellmann, Meinolf
  last_name: Sellmann
- first_name: Kevin
  full_name: Tierney, Kevin
  last_name: Tierney
citation:
  ama: 'Ansótegui C, Heymann B, Pon J, Sellmann M, Tierney K. Hyper-Reactive Tabu
    Search for MaxSAT. In: <i>Learning and Intelligent Optimization</i>. Cham: Springer
    International Publishing; 2019:309-325. doi:<a href="https://doi.org/10.1007/978-3-030-05348-2_27">10.1007/978-3-030-05348-2_27</a>'
  apa: 'Ansótegui, C., Heymann, B., Pon, J., Sellmann, M., &#38; Tierney, K. (2019).
    Hyper-Reactive Tabu Search for MaxSAT. In <i>Learning and Intelligent Optimization</i>
    (pp. 309–325). Cham: Springer International Publishing. <a href="https://doi.org/10.1007/978-3-030-05348-2_27">https://doi.org/10.1007/978-3-030-05348-2_27</a>'
  bibtex: '@inproceedings{Ansótegui_Heymann_Pon_Sellmann_Tierney_2019, place={Cham},
    title={Hyper-Reactive Tabu Search for MaxSAT}, DOI={<a href="https://doi.org/10.1007/978-3-030-05348-2_27">10.1007/978-3-030-05348-2_27</a>},
    booktitle={Learning and Intelligent Optimization}, publisher={Springer International
    Publishing}, author={Ansótegui, Carlos and Heymann, Britta and Pon, Josep and
    Sellmann, Meinolf and Tierney, Kevin}, year={2019}, pages={309–325} }'
  chicago: 'Ansótegui, Carlos, Britta Heymann, Josep Pon, Meinolf Sellmann, and Kevin
    Tierney. “Hyper-Reactive Tabu Search for MaxSAT.” In <i>Learning and Intelligent
    Optimization</i>, 309–25. Cham: Springer International Publishing, 2019. <a href="https://doi.org/10.1007/978-3-030-05348-2_27">https://doi.org/10.1007/978-3-030-05348-2_27</a>.'
  ieee: C. Ansótegui, B. Heymann, J. Pon, M. Sellmann, and K. Tierney, “Hyper-Reactive
    Tabu Search for MaxSAT,” in <i>Learning and Intelligent Optimization</i>, 2019,
    pp. 309–325.
  mla: Ansótegui, Carlos, et al. “Hyper-Reactive Tabu Search for MaxSAT.” <i>Learning
    and Intelligent Optimization</i>, Springer International Publishing, 2019, pp.
    309–25, doi:<a href="https://doi.org/10.1007/978-3-030-05348-2_27">10.1007/978-3-030-05348-2_27</a>.
  short: 'C. Ansótegui, B. Heymann, J. Pon, M. Sellmann, K. Tierney, in: Learning
    and Intelligent Optimization, Springer International Publishing, Cham, 2019, pp.
    309–325.'
conference:
  name: International Conference on Learning and Intelligent Optimization
date_created: 2019-09-17T13:39:32Z
date_updated: 2022-01-06T06:51:31Z
doi: 10.1007/978-3-030-05348-2_27
language:
- iso: eng
page: 309-325
place: Cham
project:
- _id: '52'
  name: Computing Resources Provided by the Paderborn Center for Parallel Computing
publication: Learning and Intelligent Optimization
publication_identifier:
  isbn:
  - 978-3-030-05347-5
publisher: Springer International Publishing
status: public
title: Hyper-Reactive Tabu Search for MaxSAT
type: conference
user_id: '40778'
year: '2019'
...
---
_id: '13261'
author:
- first_name: Dennis
  full_name: Wolters, Dennis
  id: '11308'
  last_name: Wolters
- first_name: Jonas
  full_name: Kirchhoff, Jonas
  id: '39928'
  last_name: Kirchhoff
- first_name: Gregor
  full_name: Engels, Gregor
  id: '107'
  last_name: Engels
citation:
  ama: 'Wolters D, Kirchhoff J, Engels G. Specifying Web Interfaces for Command-line
    Applications Based on OpenAPI. In: Yangui S, Bouguettaya A, Xue X, et al., eds.
    <i>Service-Oriented Computing – ICSOC 2019 Workshops</i>. Vol 12019. LNCS. Springer;
    2019:30-41. doi:<a href="https://doi.org/10.1007/978-3-030-45989-5\_3">10.1007/978-3-030-45989-5\_3</a>'
  apa: Wolters, D., Kirchhoff, J., &#38; Engels, G. (2019). Specifying Web Interfaces
    for Command-line Applications Based on OpenAPI. In S. Yangui, A. Bouguettaya,
    X. Xue, N. Faci, W. Gaaloul, Q. Yu, … E. Y. Nakagawa (Eds.), <i>Service-Oriented
    Computing – ICSOC 2019 Workshops</i> (Vol. 12019, pp. 30–41). Springer. <a href="https://doi.org/10.1007/978-3-030-45989-5\_3">https://doi.org/10.1007/978-3-030-45989-5\_3</a>
  bibtex: '@inproceedings{Wolters_Kirchhoff_Engels_2019, series={LNCS}, title={Specifying
    Web Interfaces for Command-line Applications Based on OpenAPI}, volume={12019},
    DOI={<a href="https://doi.org/10.1007/978-3-030-45989-5\_3">10.1007/978-3-030-45989-5\_3</a>},
    booktitle={Service-Oriented Computing – ICSOC 2019 Workshops}, publisher={Springer},
    author={Wolters, Dennis and Kirchhoff, Jonas and Engels, Gregor}, editor={Yangui,
    Sami and Bouguettaya, Athman and Xue, Xiao and Faci, Noura and Gaaloul, Walid
    and Yu, Qi and Zhou, Zhangbing and Hernandez, Nathalie and Nakagawa, Elisa Y.Editors},
    year={2019}, pages={30–41}, collection={LNCS} }'
  chicago: Wolters, Dennis, Jonas Kirchhoff, and Gregor Engels. “Specifying Web Interfaces
    for Command-Line Applications Based on OpenAPI.” In <i>Service-Oriented Computing
    – ICSOC 2019 Workshops</i>, edited by Sami Yangui, Athman Bouguettaya, Xiao Xue,
    Noura Faci, Walid Gaaloul, Qi Yu, Zhangbing Zhou, Nathalie Hernandez, and Elisa
    Y. Nakagawa, 12019:30–41. LNCS. Springer, 2019. <a href="https://doi.org/10.1007/978-3-030-45989-5\_3">https://doi.org/10.1007/978-3-030-45989-5\_3</a>.
  ieee: D. Wolters, J. Kirchhoff, and G. Engels, “Specifying Web Interfaces for Command-line
    Applications Based on OpenAPI,” in <i>Service-Oriented Computing – ICSOC 2019
    Workshops</i>, 2019, vol. 12019, pp. 30–41.
  mla: Wolters, Dennis, et al. “Specifying Web Interfaces for Command-Line Applications
    Based on OpenAPI.” <i>Service-Oriented Computing – ICSOC 2019 Workshops</i>, edited
    by Sami Yangui et al., vol. 12019, Springer, 2019, pp. 30–41, doi:<a href="https://doi.org/10.1007/978-3-030-45989-5\_3">10.1007/978-3-030-45989-5\_3</a>.
  short: 'D. Wolters, J. Kirchhoff, G. Engels, in: S. Yangui, A. Bouguettaya, X. Xue,
    N. Faci, W. Gaaloul, Q. Yu, Z. Zhou, N. Hernandez, E.Y. Nakagawa (Eds.), Service-Oriented
    Computing – ICSOC 2019 Workshops, Springer, 2019, pp. 30–41.'
date_created: 2019-09-17T15:02:32Z
date_updated: 2022-01-06T06:51:31Z
department:
- _id: '66'
doi: 10.1007/978-3-030-45989-5\_3
editor:
- first_name: Sami
  full_name: Yangui, Sami
  last_name: Yangui
- first_name: Athman
  full_name: Bouguettaya, Athman
  last_name: Bouguettaya
- first_name: Xiao
  full_name: Xue, Xiao
  last_name: Xue
- first_name: Noura
  full_name: Faci, Noura
  last_name: Faci
- first_name: Walid
  full_name: Gaaloul, Walid
  last_name: Gaaloul
- first_name: Qi
  full_name: Yu, Qi
  last_name: Yu
- first_name: Zhangbing
  full_name: Zhou, Zhangbing
  last_name: Zhou
- first_name: Nathalie
  full_name: Hernandez, Nathalie
  last_name: Hernandez
- first_name: Elisa Y.
  full_name: Nakagawa, Elisa Y.
  last_name: Nakagawa
intvolume: '     12019'
language:
- iso: eng
page: 30-41
publication: Service-Oriented Computing – ICSOC 2019 Workshops
publication_status: published
publisher: Springer
series_title: LNCS
status: public
title: Specifying Web Interfaces for Command-line Applications Based on OpenAPI
type: conference
user_id: '11308'
volume: 12019
year: '2019'
...
---
_id: '10258'
abstract:
- lang: eng
  text: Für die Zerstäubung hochviskoser Flüssigkeiten werden neben Düsenzerstäubern
    vor allem UltraschallStehwellenzerstäuber angewendet [1]. Diese ermöglichen ohne
    weitere Maßnahmen zwar keine gerichtete Zerstäubung, benötigen jedoch im Gegensatz
    zu Düsenzerstäubern keine hohen Drücke und haben keine hohen Austrittsgeschwindigkeiten.
    Zur Erzeugung der Ultraschallwellen werden typischerweise piezoelektrische, mit
    Bolzen verschraubte LangevinWandler verwendet [1-4], die eine starke Schallabstrahlung
    bei einer elektrischen Eingangsleistung von bis zu einigen Kilowatt erzeugen können.
    Wie bei jedem anderen schwingenden System emittiert der Ultraschallwandler zunächst
    eine Wanderwelle. Mit einem Reflektor, der gegenüber der Sonotrode angeordnet
    ist, wird eine stehende Welle erzeugt. Im Resonanzabstand zwischen Reflektor und
    Wandler werden abgestrahlte und reflektierte Wellen so überlagert, dass höhere
    Schalldruckamplituden erzielt werden. Ein einfacher Ansatz zur Maximierung des
    Schallpegels im Stehwellenfeld ist die Erhöhung der Schwingungsamplituden des
    Wandlers, die jedoch zu Schäden oder zumindest zu einer Verringerung der Lebensdauer
    führen kann. Hohe Schalldrücke werden auch bei geringen Abständen zwischen Wandler
    und Reflektor erreicht. Das Volumen des Schallfeldes ist in diesem Fall jedoch
    für die meisten Prozesse zu klein. Ein weiterer Ansatz ist die Verwendung zweier
    entgegengesetzt angeordneter Wandler [5]. In diesem Fall erfordert jedoch die
    Erzeugung einer stehenden Welle eine genaue Abstimmung von Frequenz und Phase
    beider Wandler, was eine komplexe Steuerung erfordert. Ebenso ist es möglich,
    geometrische Randbedingungen des Stehwellensystems zu optimieren, sodass es zu
    optimaler Interferenz der Wellen kommt. Im Folgenden wird der Anschaulichkeit
    halber vereinfachend angenommen, dass der Wandler an seiner Sonotrodenoberfläche
    einzelne Schallstrahlen aussendet, die in Nähe des Wandlers nahezu parallel verlaufen
    und sich mit zunehmender Entfernung vom Wandler auffächern. Ein einfaches Stehwellensystem,
    bestehend aus ebener Sonotrode und ebenem Reflektor, erzeugt bei kleinem Abstand
    zwischen Sonotrode und Reflektor sehr hohe Schallpegel, da nahezu sämtliche ausgesandten
    Schallstrahlen in Richtung der Sonotrode reflektiert werden positive Interferenz
    entsteht. Erhöht man jedoch den Abstand zwischen Sonotrode und Reflektor, so nehmen
    die Verluste durch Schallstrahlen, die den Prozessraum verlassen, zu. Wie Abbildung
    1 gezeigt, werden nur Schallstrahlen, die in etwa parallel zur Rotationsachse
    verlaufen, zum Wandler zurück reflektiert und tragen zum Stehwellenfeld bei. Die
    Strahlen haben zudem abhängig vom Abstrahlwinkel unterschiedliche Weglängen. Die
    Stehwellenbedingung ist demnach nur für Strahlen in der Nähe der Rotationsachse
    exakt erfüllt. Um dies zu vermeiden, müssen die Geometrien von Wandler und Reflektor
    optimiert werden. In den folgenden Abschnitten wird zunächst ein Optimierungsansatz
    vorgestellt. Mithilfe eines FiniteElemente-Modells werden die Auswirkungen einer
    optimierten Geometrie auf den maximalen Schalldruckpegel untersucht. Ergebnisse
    werden durch Messungen an einem experimentellen Aufbau eines Stehwellensystems
    validiert. Es wird gezeigt, wie sich die Optimierung der geometrischen Randbedingungen
    auf die Zerstäubung hochviskoser Flüssigkeiten auswirkt.
author:
- first_name: Paul
  full_name: Dunst, Paul
  id: '22130'
  last_name: Dunst
- first_name: Tobias
  full_name: Hemsel, Tobias
  id: '210'
  last_name: Hemsel
- first_name: Peter
  full_name: Bornmann, Peter
  last_name: Bornmann
- first_name: 'Walter '
  full_name: 'Littmann, Walter '
  last_name: Littmann
- first_name: Walter
  full_name: Sextro, Walter
  id: '21220'
  last_name: Sextro
citation:
  ama: 'Dunst P, Hemsel T, Bornmann P, Littmann W, Sextro W. Modellbasierte und experimentelle
    Charakterisierung von intensiven Ultraschall-Stehwellenfeldern für die Zerstäubung
    hochviskoser Flüssigkeiten. In: <i>DAGA 2019</i>. ; 2019.'
  apa: Dunst, P., Hemsel, T., Bornmann, P., Littmann, W., &#38; Sextro, W. (2019).
    Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern
    für die Zerstäubung hochviskoser Flüssigkeiten. In <i>DAGA 2019</i>. Rostock.
  bibtex: '@inproceedings{Dunst_Hemsel_Bornmann_Littmann_Sextro_2019, title={Modellbasierte
    und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern
    für die Zerstäubung hochviskoser Flüssigkeiten}, booktitle={DAGA 2019}, author={Dunst,
    Paul and Hemsel, Tobias and Bornmann, Peter and Littmann, Walter  and Sextro,
    Walter}, year={2019} }'
  chicago: Dunst, Paul, Tobias Hemsel, Peter Bornmann, Walter  Littmann, and Walter
    Sextro. “Modellbasierte Und Experimentelle Charakterisierung von Intensiven Ultraschall-Stehwellenfeldern
    Für Die Zerstäubung Hochviskoser Flüssigkeiten.” In <i>DAGA 2019</i>, 2019.
  ieee: P. Dunst, T. Hemsel, P. Bornmann, W. Littmann, and W. Sextro, “Modellbasierte
    und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern
    für die Zerstäubung hochviskoser Flüssigkeiten,” in <i>DAGA 2019</i>, Rostock,
    2019.
  mla: Dunst, Paul, et al. “Modellbasierte Und Experimentelle Charakterisierung von
    Intensiven Ultraschall-Stehwellenfeldern Für Die Zerstäubung Hochviskoser Flüssigkeiten.”
    <i>DAGA 2019</i>, 2019.
  short: 'P. Dunst, T. Hemsel, P. Bornmann, W. Littmann, W. Sextro, in: DAGA 2019,
    2019.'
conference:
  end_date: 2019-03-21
  location: Rostock
  name: Deutsche Jahrestagung für Akustik - DAGA 2019
  start_date: 2019-03-18
date_created: 2019-06-17T13:01:47Z
date_updated: 2022-01-06T06:50:33Z
department:
- _id: '151'
language:
- iso: eng
publication: DAGA 2019
status: public
title: Modellbasierte und experimentelle Charakterisierung von intensiven Ultraschall-Stehwellenfeldern
  für die Zerstäubung hochviskoser Flüssigkeiten
type: conference
user_id: '22130'
year: '2019'
...
---
_id: '13652'
author:
- first_name: Kristian
  full_name: Hinnenthal, Kristian
  id: '32229'
  last_name: Hinnenthal
- first_name: Christian
  full_name: Scheideler, Christian
  id: '20792'
  last_name: Scheideler
- first_name: Martijn
  full_name: Struijs, Martijn
  last_name: Struijs
citation:
  ama: 'Hinnenthal K, Scheideler C, Struijs M. Fast Distributed Algorithms for LP-Type
    Problems of Low Dimension. In: <i>33rd International Symposium on Distributed
    Computing (DISC 2019)</i>. ; 2019. doi:<a href="https://doi.org/10.4230/LIPICS.DISC.2019.23">10.4230/LIPICS.DISC.2019.23</a>'
  apa: Hinnenthal, K., Scheideler, C., &#38; Struijs, M. (2019). Fast Distributed
    Algorithms for LP-Type Problems of Low Dimension. In <i>33rd International Symposium
    on Distributed Computing (DISC 2019)</i>. <a href="https://doi.org/10.4230/LIPICS.DISC.2019.23">https://doi.org/10.4230/LIPICS.DISC.2019.23</a>
  bibtex: '@inproceedings{Hinnenthal_Scheideler_Struijs_2019, title={Fast Distributed
    Algorithms for LP-Type Problems of Low Dimension}, DOI={<a href="https://doi.org/10.4230/LIPICS.DISC.2019.23">10.4230/LIPICS.DISC.2019.23</a>},
    booktitle={33rd International Symposium on Distributed Computing (DISC 2019)},
    author={Hinnenthal, Kristian and Scheideler, Christian and Struijs, Martijn},
    year={2019} }'
  chicago: Hinnenthal, Kristian, Christian Scheideler, and Martijn Struijs. “Fast
    Distributed Algorithms for LP-Type Problems of Low Dimension.” In <i>33rd International
    Symposium on Distributed Computing (DISC 2019)</i>, 2019. <a href="https://doi.org/10.4230/LIPICS.DISC.2019.23">https://doi.org/10.4230/LIPICS.DISC.2019.23</a>.
  ieee: K. Hinnenthal, C. Scheideler, and M. Struijs, “Fast Distributed Algorithms
    for LP-Type Problems of Low Dimension,” in <i>33rd International Symposium on
    Distributed Computing (DISC 2019)</i>, 2019.
  mla: Hinnenthal, Kristian, et al. “Fast Distributed Algorithms for LP-Type Problems
    of Low Dimension.” <i>33rd International Symposium on Distributed Computing (DISC
    2019)</i>, 2019, doi:<a href="https://doi.org/10.4230/LIPICS.DISC.2019.23">10.4230/LIPICS.DISC.2019.23</a>.
  short: 'K. Hinnenthal, C. Scheideler, M. Struijs, in: 33rd International Symposium
    on Distributed Computing (DISC 2019), 2019.'
date_created: 2019-10-08T11:53:38Z
date_updated: 2022-01-06T06:51:41Z
department:
- _id: '79'
doi: 10.4230/LIPICS.DISC.2019.23
language:
- iso: eng
project:
- _id: '1'
  name: SFB 901
- _id: '2'
  name: SFB 901 - Project Area A
- _id: '5'
  name: SFB 901 - Subproject A1
publication: 33rd International Symposium on Distributed Computing (DISC 2019)
status: public
title: Fast Distributed Algorithms for LP-Type Problems of Low Dimension
type: conference
user_id: '32229'
year: '2019'
...
---
_id: '22026'
abstract:
- lang: eng
  text: Das Fused Deposition Modeling (FDM) ist ein etabliertes additives Fertigungsverfahren
    zur Her-stellung von thermoplastischen Kunststoffbauteilen. In dem vorliegenden
    Beitrag sind FDM-Verstärkungsstrukturen aus dem Material Ultem 9085 dynamischen
    Langzeituntersuchungen un-terzogen worden. Dabei wurde die innere Struktur der
    Probekörper über eine Parametervariation verändert, sodass anschließend die signifikanten
    Einflussfaktoren auf die Langzeitfestigkeit un-ter dynamischer Belastung identifiziert
    und analysiert werden konnten. Mit dieser Vorgehens-weise sollte gleichzeitig
    eine Optimierung der FDM-Verstärkungsstrukturen hinsichtlich der dy-namischen
    Langzeiteigenschaften bei Biege- und Druckbelastungen vorgenommen werden. Des
    Weiteren sind anhand der Probekörper die auftretenden Bruch- und Rissausbreitungsmechanis-men
    analysiert worden. Anhand der ermittelten Wöhlerkurven kann die Lebensdauer unter
    dy-namischer Belastung abgeschätzt werden. Außerdem zeigen die Untersuchungen,
    dass Fehlstel-len durch eine hohe Strangbreite und Überfüllungen im Bauteil für
    Schwachstellen in den FDM-Verstärkungsstrukturen sorgen, an denen Risse bei Druckbelastung
    entstanden sind und sich dadurch schneller ausbreiten konnten.
author:
- first_name: Elmar
  full_name: Moritzer, Elmar
  id: '20531'
  last_name: Moritzer
- first_name: André
  full_name: Hirsch, André
  id: '27599'
  last_name: Hirsch
- first_name: S.
  full_name: Paulus, S.
  last_name: Paulus
citation:
  ama: Moritzer E, Hirsch A, Paulus S. <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
    Unter Dynamischer Beanspruchung</i>. Springer Vieweg; 2019:185-198. doi:<a href="https://doi.org/10.1007/978-3-658-27412-2">10.1007/978-3-658-27412-2</a>
  apa: Moritzer, E., Hirsch, A., &#38; Paulus, S. (2019). <i>Rissausbreitungsmechanismen
    in FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung</i> (pp. 185–198).
    Springer Vieweg. <a href="https://doi.org/10.1007/978-3-658-27412-2">https://doi.org/10.1007/978-3-658-27412-2</a>
  bibtex: '@book{Moritzer_Hirsch_Paulus_2019, title={Rissausbreitungsmechanismen in
    FDM-Verstärkungsstrukturen unter dynamischer Beanspruchung}, DOI={<a href="https://doi.org/10.1007/978-3-658-27412-2">10.1007/978-3-658-27412-2</a>},
    publisher={Springer Vieweg}, author={Moritzer, Elmar and Hirsch, André and Paulus,
    S.}, year={2019}, pages={185–198} }'
  chicago: Moritzer, Elmar, André Hirsch, and S. Paulus. <i>Rissausbreitungsmechanismen
    in FDM-Verstärkungsstrukturen Unter Dynamischer Beanspruchung</i>. Springer Vieweg,
    2019. <a href="https://doi.org/10.1007/978-3-658-27412-2">https://doi.org/10.1007/978-3-658-27412-2</a>.
  ieee: E. Moritzer, A. Hirsch, and S. Paulus, <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
    unter dynamischer Beanspruchung</i>. Springer Vieweg, 2019, pp. 185–198.
  mla: Moritzer, Elmar, et al. <i>Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
    Unter Dynamischer Beanspruchung</i>. Springer Vieweg, 2019, pp. 185–98, doi:<a
    href="https://doi.org/10.1007/978-3-658-27412-2">10.1007/978-3-658-27412-2</a>.
  short: E. Moritzer, A. Hirsch, S. Paulus, Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen
    Unter Dynamischer Beanspruchung, Springer Vieweg, 2019.
date_created: 2021-05-07T13:23:06Z
date_updated: 2022-04-25T07:59:34Z
department:
- _id: '219'
- _id: '624'
- _id: '367'
- _id: '321'
- _id: '9'
doi: 10.1007/978-3-658-27412-2
language:
- iso: eng
page: 185-198
publication_identifier:
  isbn:
  - 978-3-658-27411-5
publisher: Springer Vieweg
quality_controlled: '1'
status: public
title: Rissausbreitungsmechanismen in FDM-Verstärkungsstrukturen unter dynamischer
  Beanspruchung
type: book
user_id: '70729'
year: '2019'
...
---
_id: '30855'
author:
- first_name: Thorsten
  full_name: Pape, Thorsten
  last_name: Pape
citation:
  ama: Pape T. <i>Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren in
    Statorflusskoordinaten ohne Rotorlagesensor</i>.; 2019.
  apa: Pape, T. (2019). <i>Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren
    in Statorflusskoordinaten ohne Rotorlagesensor</i>.
  bibtex: '@book{Pape_2019, title={Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren
    in Statorflusskoordinaten ohne Rotorlagesensor}, author={Pape, Thorsten}, year={2019}
    }'
  chicago: Pape, Thorsten. <i>Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren
    in Statorflusskoordinaten ohne Rotorlagesensor</i>, 2019.
  ieee: T. Pape, <i>Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren in
    Statorflusskoordinaten ohne Rotorlagesensor</i>. 2019.
  mla: Pape, Thorsten. <i>Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren
    in Statorflusskoordinaten ohne Rotorlagesensor</i>. 2019.
  short: T. Pape, Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren in
    Statorflusskoordinaten ohne Rotorlagesensor, 2019.
date_created: 2022-04-07T11:29:53Z
date_updated: 2022-04-26T08:57:31Z
department:
- _id: '52'
language:
- iso: ger
main_file_link:
- url: https://www.deutsche-digitale-bibliothek.de/item/6D25AWHRGBBUFGQUWWZGGGMVYV44KJPX
publication_identifier:
  isbn:
  - '978-3-8440-6952-5 '
status: public
title: Ein Beitrag zur Regelung von Permanentmagnet-Synchronmotoren in Statorflusskoordinaten
  ohne Rotorlagesensor
type: dissertation
user_id: '71353'
year: '2019'
...
---
_id: '31752'
author:
- first_name: Stephanie
  full_name: Willeke, Stephanie
  id: '6701'
  last_name: Willeke
citation:
  ama: 'Willeke S. Konstruktionen des Terrors. Zur Hassrede in den Romanen Jenseits
    von Deutschland von George Tenner und Das dunkle Schiff von Sherko Fatah. In:
    Brokoff  J, Walter-Jochum R, eds. <i>Hass/Literatur. Literatur- und kulturwissenschaftliche
    Beiträge zu einer Theorie- und Diskursgeschichte</i>. transcript ; 2019:355-377.'
  apa: Willeke, S. (2019). Konstruktionen des Terrors. Zur Hassrede in den Romanen
    Jenseits von Deutschland von George Tenner und Das dunkle Schiff von Sherko Fatah.
    In J. Brokoff  &#38; R. Walter-Jochum (Eds.), <i>Hass/Literatur. Literatur- und
    kulturwissenschaftliche Beiträge zu einer Theorie- und Diskursgeschichte</i> (pp.
    355–377). transcript .
  bibtex: '@inbook{Willeke_2019, place={Bielefeld}, title={Konstruktionen des Terrors.
    Zur Hassrede in den Romanen Jenseits von Deutschland von George Tenner und Das
    dunkle Schiff von Sherko Fatah}, booktitle={Hass/Literatur. Literatur- und kulturwissenschaftliche
    Beiträge zu einer Theorie- und Diskursgeschichte}, publisher={transcript }, author={Willeke,
    Stephanie}, editor={Brokoff , Jürgen  and Walter-Jochum, Robert }, year={2019},
    pages={355–377} }'
  chicago: 'Willeke, Stephanie. “Konstruktionen des Terrors. Zur Hassrede in den Romanen
    Jenseits von Deutschland von George Tenner und Das dunkle Schiff von Sherko Fatah.”
    In <i>Hass/Literatur. Literatur- und kulturwissenschaftliche Beiträge zu einer
    Theorie- und Diskursgeschichte</i>, edited by Jürgen  Brokoff  and Robert  Walter-Jochum,
    355–77. Bielefeld: transcript , 2019.'
  ieee: 'S. Willeke, “Konstruktionen des Terrors. Zur Hassrede in den Romanen Jenseits
    von Deutschland von George Tenner und Das dunkle Schiff von Sherko Fatah,” in
    <i>Hass/Literatur. Literatur- und kulturwissenschaftliche Beiträge zu einer Theorie-
    und Diskursgeschichte</i>, J. Brokoff  and R. Walter-Jochum, Eds. Bielefeld: transcript
    , 2019, pp. 355–377.'
  mla: Willeke, Stephanie. “Konstruktionen des Terrors. Zur Hassrede in den Romanen
    Jenseits von Deutschland von George Tenner und Das dunkle Schiff von Sherko Fatah.”
    <i>Hass/Literatur. Literatur- und kulturwissenschaftliche Beiträge zu einer Theorie-
    und Diskursgeschichte</i>, edited by Jürgen  Brokoff  and Robert  Walter-Jochum,
    transcript , 2019, pp. 355–77.
  short: 'S. Willeke, in: J. Brokoff , R. Walter-Jochum (Eds.), Hass/Literatur. Literatur-
    und kulturwissenschaftliche Beiträge zu einer Theorie- und Diskursgeschichte,
    transcript , Bielefeld, 2019, pp. 355–377.'
date_created: 2022-06-07T09:36:25Z
date_updated: 2022-06-07T10:03:50Z
department:
- _id: '465'
- _id: '5'
editor:
- first_name: 'Jürgen '
  full_name: 'Brokoff , Jürgen '
  last_name: 'Brokoff '
- first_name: 'Robert '
  full_name: 'Walter-Jochum, Robert '
  last_name: Walter-Jochum
language:
- iso: ger
page: 355-377
place: Bielefeld
publication: Hass/Literatur. Literatur- und kulturwissenschaftliche Beiträge zu einer
  Theorie- und Diskursgeschichte
publisher: 'transcript '
status: public
title: Konstruktionen des Terrors. Zur Hassrede in den Romanen Jenseits von Deutschland
  von George Tenner und Das dunkle Schiff von Sherko Fatah
type: book_chapter
user_id: '49063'
year: '2019'
...
---
_id: '31746'
author:
- first_name: Stephanie
  full_name: Willeke, Stephanie
  id: '6701'
  last_name: Willeke
citation:
  ama: 'Willeke S. „So kommt doch alles noch zum Happy End.“ Sammy Gronemanns zionistische
    Komödie Der Prozess um des Esels Schatten. In: Willeke S, Eke NO, eds. <i>Zwischen
    den Sprachen – Mit der Sprache? Deutschsprachige Literatur in Palästina und Israel</i>.
    Aisthesis ; 2019:251-270.'
  apa: Willeke, S. (2019). „So kommt doch alles noch zum Happy End.“ Sammy Gronemanns
    zionistische Komödie Der Prozess um des Esels Schatten. In S. Willeke &#38; N.
    O. Eke (Eds.), <i>Zwischen den Sprachen – Mit der Sprache? Deutschsprachige Literatur
    in Palästina und Israel</i> (pp. 251–270). Aisthesis .
  bibtex: '@inbook{Willeke_2019, place={Bielefeld}, title={„So kommt doch alles noch
    zum Happy End.“ Sammy Gronemanns zionistische Komödie Der Prozess um des Esels
    Schatten}, booktitle={Zwischen den Sprachen – Mit der Sprache? Deutschsprachige
    Literatur in Palästina und Israel}, publisher={Aisthesis }, author={Willeke, Stephanie},
    editor={Willeke, Stephanie and Eke, Norbert Otto}, year={2019}, pages={251–270}
    }'
  chicago: 'Willeke, Stephanie. “„So kommt doch alles noch zum Happy End.“ Sammy Gronemanns
    zionistische Komödie Der Prozess um des Esels Schatten.” In <i>Zwischen den Sprachen
    – Mit der Sprache? Deutschsprachige Literatur in Palästina und Israel</i>, edited
    by Stephanie Willeke and Norbert Otto Eke, 251–70. Bielefeld: Aisthesis , 2019.'
  ieee: 'S. Willeke, “„So kommt doch alles noch zum Happy End.“ Sammy Gronemanns zionistische
    Komödie Der Prozess um des Esels Schatten,” in <i>Zwischen den Sprachen – Mit
    der Sprache? Deutschsprachige Literatur in Palästina und Israel</i>, S. Willeke
    and N. O. Eke, Eds. Bielefeld: Aisthesis , 2019, pp. 251–270.'
  mla: Willeke, Stephanie. “„So kommt doch alles noch zum Happy End.“ Sammy Gronemanns
    zionistische Komödie Der Prozess um des Esels Schatten.” <i>Zwischen den Sprachen
    – Mit der Sprache? Deutschsprachige Literatur in Palästina und Israel</i>, edited
    by Stephanie Willeke and Norbert Otto Eke, Aisthesis , 2019, pp. 251–70.
  short: 'S. Willeke, in: S. Willeke, N.O. Eke (Eds.), Zwischen den Sprachen – Mit
    der Sprache? Deutschsprachige Literatur in Palästina und Israel, Aisthesis , Bielefeld,
    2019, pp. 251–270.'
date_created: 2022-06-07T09:34:56Z
date_updated: 2022-06-07T10:04:04Z
department:
- _id: '465'
- _id: '5'
editor:
- first_name: Stephanie
  full_name: Willeke, Stephanie
  last_name: Willeke
- first_name: Norbert Otto
  full_name: Eke, Norbert Otto
  last_name: Eke
language:
- iso: ger
page: 251-270
place: Bielefeld
publication: Zwischen den Sprachen – Mit der Sprache? Deutschsprachige Literatur in
  Palästina und Israel
publisher: 'Aisthesis '
status: public
title: „So kommt doch alles noch zum Happy End.“ Sammy Gronemanns zionistische Komödie
  Der Prozess um des Esels Schatten
type: book_chapter
user_id: '49063'
year: '2019'
...
