@inproceedings{65172,
  abstract     = {{<jats:p>Abstract. The process of joining is used in numerous sectors of the manufacturing industry, where constructions composed of individual components or metal sheets are combined to form complex structures. A straightforward and pervasive approach for joining materials of disparate natures and coated surfaces is clinching. During the clinching process, plastic deformation, residual stresses and damage are introduced into the joint. Due to time-varying service loads cracks can initiate and propagate in the vicinity of the joint which limits the lifetime of the clinched structure. In order to prevent those damage cases, it is crucial to perform fracture mechanical evaluation of cracks in the joint region. Therefore, this publication deals with the question of how plastic deformation, residual stresses and damage need to be considered for the assessment of a crack. For this purpose, simple substitute models are employed to illustrate the principles based on the clinching application example.</jats:p>}},
  author       = {{Weiß, Deborah and Duffe, Tobias and Joy, Tintu David and Kullmer, Gunter}},
  booktitle    = {{Materials Research Proceedings}},
  issn         = {{2474-395X}},
  publisher    = {{Materials Research Forum LLC}},
  title        = {{{Consideration of residual stresses and damage in the fracture mechanical investigation of mechanically joined structures}}},
  doi          = {{10.21741/9781644903551-28}},
  volume       = {{52}},
  year         = {{2025}},
}

@inproceedings{65205,
  author       = {{Moritzer, Elmar and Lingnau, Kai Martin}},
  booktitle    = {{The 40th International Conference of Polymer Processing Society}},
  title        = {{{Transfer of powder-based direct coating in the injection molding process from two dimensional components to three-dimensional components}}},
  year         = {{2025}},
}

@inproceedings{65211,
  author       = {{Held, Christian and Moritzer, Elmar}},
  booktitle    = {{FA11 – Kunststoff-Fügen}},
  title        = {{{Werkstofflicher Ansatz zum adhäsiv-basierten Fügen für hochflexible TPE-Organobleche als Verstärkungsstruktur}}},
  year         = {{2025}},
}

@inproceedings{65203,
  author       = {{Held, Christian and Moritzer, Elmar}},
  booktitle    = {{the 40th International Conference of Polymer Processing Society}},
  title        = {{{Influence of the processing parameters on the mechanical strenght of injection moulded BMC components for direct screwing}}},
  year         = {{2025}},
}

@inproceedings{65208,
  author       = {{Rempel, Timm and Brüning, Florian}},
  booktitle    = {{ANTEC}},
  title        = {{{Investigations into the specific throughput stability of conical feed zones over the rotation speed during the direct processing of polypropylene regrind}}},
  year         = {{2025}},
}

@inproceedings{65209,
  author       = {{Held, Christian and Moritzer, Elmar}},
  booktitle    = {{FA11 – Kunststoff-Fügen}},
  title        = {{{Werkstoffgerechte Auslegung von Direktverschraubungen in SMC/BMC Bauteilen}}},
  year         = {{2025}},
}

@inproceedings{65210,
  author       = {{Held, Christian and Moritzer, Elmar}},
  booktitle    = {{FA11 – Kunststoff-Fügen}},
  title        = {{{Werkstoffgerechte Auslegung von Direktverschraubungen in SMC/BMC Bauteilen}}},
  year         = {{2025}},
}

@misc{63764,
  author       = {{Weiß, Deborah and Krome, Sven and Duffe, Tobias and Kullmer, Gunter and Ostwald, Richard}},
  publisher    = {{LibreCat University}},
  title        = {{{Experimentelle Ermittlung von Rissablenkungswinkeln bei außerphasiger Mixed-Mode-Belastung mittels einer neuartigen Probengeometrie}}},
  doi          = {{https://doi.org/10.48447/BR-2025-490}},
  year         = {{2025}},
}

@article{65004,
  author       = {{Knaup, Felix and Brüning, Florian}},
  journal      = {{Extrusion}},
  keywords     = {{Aufschmelzen, extrusion, Messtechnik}},
  pages        = {{28–33}},
  title        = {{{Vergleich experimenteller Methoden zur Untersuchung des Aufschmelzprozesses in Einschneckenextrudern}}},
  year         = {{2025}},
}

@inproceedings{61103,
  abstract     = {{Verification planning for engineering complex systems lacks a systematic procedure for creating test scenarios. Test scenarios can be generated by combining test cases, or by integrating test cases into pre-specified scenarios. Based on a systematic literature analysis a method is developed to simplify verification planning by creating new test scenarios and enriching existing ones. To assist the V&V engineer in planning test scenarios, a catalogue of combination premises is created to support the method. The method is evaluated in the development of a platform for emergency management. Evaluation proves that the method makes modelling of test scenarios more efficient.}},
  author       = {{Gräßler, Iris and Ebel, Marcel and Pottebaum, Jens}},
  booktitle    = {{Procedia CIRP}},
  issn         = {{2212-8271}},
  keywords     = {{Systems Engineering, test scenario creation, verification, customer involvement}},
  location     = {{Patras, Greece}},
  pages        = {{213--218}},
  publisher    = {{Elsevier BV}},
  title        = {{{Method for systematic creation of test scenarios for early customer involvement}}},
  doi          = {{https://doi.org/10.1016/j.procir.2025.08.038}},
  volume       = {{136}},
  year         = {{2025}},
}

@inproceedings{62149,
  abstract     = {{The increasing complexity of technical systems requires early, structured verification and validation (V&V). Existing metadata models only map parts of the engineering process and do not enable a continuous chain of effects from requirements to test results. The aim of this publication is to develop a holistic V&V metadata model for the consistent, transparent and machine-processable description and linking of relevant engineering artifacts. In a five-stage research approach, essential model components are derived from literature and are integrated into a holistic model. Initial applications as part of a European research project show the potential of the model for a well-founded effect chain analysis and decision-supporting V&V processes.}},
  author       = {{Gräßler, Iris and Ebel, Marcel}},
  booktitle    = {{DS 140: Proceedings of the 36th Symposium Design for X (DFX2025)}},
  keywords     = {{verification, metadata model, Systems Engineering}},
  location     = {{Hamburg}},
  publisher    = {{The Design Society}},
  title        = {{{Ganzheitliches Metadatenmodel für die Verifikation und Validierung in der Entwicklung komplexer technischer Systeme}}},
  doi          = {{10.35199/dfx2025.09}},
  year         = {{2025}},
}

@inproceedings{65231,
  author       = {{Charalampakis, Konstantinos and Safranoglou, Ioannis and Stavroulakis, Alexis and Ebel, Marcel and Gräßler, Iris and Dimelli, Despina and Mania, Katerina}},
  booktitle    = {{2025 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}},
  publisher    = {{IEEE}},
  title        = {{{Augmented Reality for Navigation, Team Coordination, and Real-Time Data Visualization in Firefighting Operations}}},
  doi          = {{10.1109/ismar-adjunct68609.2025.00041}},
  year         = {{2025}},
}

@inproceedings{65213,
  author       = {{Petzke, Jonas Dirk Rudolf Helmut and Schöppner, Volker}},
  title        = {{{Thermo-Chemical Devulcanization of Sulfur-Cured Styrene-Butadiene Rubber (SBR) Using Diphenyldisulfide (DPDS)}}},
  year         = {{2025}},
}

@inproceedings{65204,
  author       = {{Moritzer, Elmar and Salm, Maximilian Karl Franz}},
  booktitle    = {{The 40th International Conference of Polymer Processing Society}},
  title        = {{{Influence of Filler Type and Volume Fraction on the Electrical Conductivity and Shore Hardness of TPU Composites in Fused Filament Fabrication}}},
  year         = {{2025}},
}

@inproceedings{63441,
  author       = {{Moritzer, Elmar and Brandes, Philipp and Wittler, Maurice and Claes, Leander and Wippermann, Mareen and Henning, Bernd}},
  booktitle    = {{40th International Conference of the Polymer Processing Society}},
  keywords     = {{Faser-Kunststoff-Verbunde (FKV), Faserverstärkte Kunststoffe (FVK), Organobleche, Ultraschall}},
  title        = {{{Non-destructive fiber-matrix adhesion measurement of glass fiber reinforced thermoplastic composite laminates using ultrasound}}},
  year         = {{2025}},
}

@inbook{65240,
  author       = {{Petzke, Jonas Dirk Rudolf Helmut and Schmidt, Leon and Kleinschmidt, Dennis and Brüning, Florian}},
  booktitle    = {{International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}},
  keywords     = {{distributives Mischen, Extrusion, Kautschuk, Stiftextruder}},
  pages        = {{150–151}},
  title        = {{{Experimental Analysis of the Mixing Behavior of Ethylene-Propylene-Diene Rubber (EPDM) in a Rubber Pin Extruder under Variation of Process Parameters and Mixing Elements}}},
  year         = {{2025}},
}

@inbook{65238,
  author       = {{Damanik, Hogenrich and Fatima, Arooj and Turek, Stefan and Petzke, Jonas Dirk Rudolf Helmut and Kleinschmidt, Dennis and Brüning, Florian}},
  booktitle    = {{International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}},
  keywords     = {{CFD simulation, Materialmodellierung, Phan-Thien-Tanner, PTT, Simulation}},
  pages        = {{266–268}},
  title        = {{{Numerical modeling of the non-isothermal viscoelastic flow behavior of rubber compounds based on the PHAN-THİEN-TANNER (PTT) model}}},
  year         = {{2025}},
}

@inbook{65239,
  author       = {{Petzke, Jonas Dirk Rudolf Helmut and Kleinschmidt, Dennis and Brüning, Florian}},
  booktitle    = {{International Rubber Conference (IRC) 2025, Bangkok, BITEC; e-abstract book}},
  keywords     = {{Devulkanisation, Kautschuk, Recycling}},
  pages        = {{185–186}},
  title        = {{{Thermo-Chemical Devulcanization of Sulfur-cured Styrene-Butadiene Rubber (SBR) Using Diphenyldisulfide (DPDS)}}},
  year         = {{2025}},
}

@article{65241,
  author       = {{Rempel, Timm and Brüning, Florian}},
  journal      = {{ANTEC}},
  title        = {{{Investigations into the specific throughput stability of conical feed zones over the rotation speed during the direct processing of polypropylene regrind}}},
  year         = {{2025}},
}

@inproceedings{65245,
  author       = {{Petzke, Jonas Dirk Rudolf Helmut}},
  title        = {{{Devulcanization behavior of SBR-based GTR compounds}}},
  year         = {{2025}},
}