@inproceedings{65119,
  author       = {{Schöppner, Volker and Arndt, Theresa}},
  title        = {{{Experimental investigations on anvil-free ultrasonic welding for welding situations with one sided access}}},
  year         = {{2024}},
}

@book{65123,
  abstract     = {{<p> Inhalt Aktuelle rechtliche Rahmenbedingungen TA Luft – Wesentliche Änderungen, Herausforderungen, Konsequenzen in der Praxis und laufende Aktivitäten 1 Die Lösungsmittelbilanz bei VOC Anlagen als Nachweis der Einhaltung des Grenzwertes für diffuse Emissionen The solvent mass balance for VOC installations as verification of compliance with the limit value for fugitive emissions 11 Diffuse Emissionen Dichte Flanschverbindungen – Richtlinie VDI 2290 23 Technik zur Vermeidung und Verminderung von diffusen Emissionen – Regel- und Absperrarmaturen 37 Erstellung der Lösungsmittelbilanz im Kontext der 31. BImSchV – Rechtliche Anforderungen, praktische Herausforderungen und Unsicherheiten Preparation of the solvent balance in the context of the 31. BImSchV - legal requirements, practical challenges and uncertainties 45 Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme 61 VKA Control - Bewertung von Legionellenemissionen aus Verdunstungskühlanlagen: Neue Erkenntnisse und Methoden 71 Verbrennungsführung und Minderung organischer Emissionen 27. BImSchV versus Klimaschut... </p>}},
  editor       = {{Moritzer, Elmar and Bartmann, Finn and Riedl, Alexander}},
  isbn         = {{9783181024324}},
  publisher    = {{VDI Verlag}},
  title        = {{{Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme}}},
  doi          = {{10.51202/9783181024324}},
  year         = {{2024}},
}

@inproceedings{65125,
  abstract     = {{<jats:p>"In the course of environmental protection and the amendment of TA Luft, emissions from flange connections must be reduced (to L0.01). The design and calculation of steel flanges is easy to handle with the help of EN 1591-1 and EN 13555. However, these standards are not suitable in their current form for thermoplastic sealing joints, such as those used in natural gas supply. For this reason, lengthy and cost-intensive tests must currently be carried out to verify tightness and strength. The aim of a doctoral project is to develop a time-efficient and cost-effective analytical calculation method based on the existing standards. For this purpose, the energy-elastic material parameters of the steel must be replaced by elastoplastic material parameters of the thermoplastics and the calculation algorithm adapted accordingly. The problem is to be investigated with the aid of numerical structural simulations (FEM) and experimental tests."</jats:p>}},
  author       = {{Bartmann, Finn and Riedl, Alexander and Moritzer, Elmar}},
  booktitle    = {{22nd International Sealing Conference 2024}},
  publisher    = {{VDMA Fluidtechnik}},
  title        = {{{Development of an analytical calculation method for the design of thermoplastic flange systems}}},
  doi          = {{10.61319/pqdsdeu6}},
  year         = {{2024}},
}

@inproceedings{59159,
  author       = {{Moritzer, Elmar and Held, Christian}},
  booktitle    = {{DVS Plenarsitzung AG W4 Fügen von Kunststoffen}},
  publisher    = {{DVS}},
  title        = {{{Direktverschraubung additiv gefertigter Kunststoffbauteile}}},
  year         = {{2024}},
}

@inproceedings{57309,
  author       = {{Safranoglou, Ioannis and Stavroulakis, Alexis and Pottebaum, Jens and Ebel, Marcel and Lamprinakis, Georgios and Dimelli, Despina and Mania, Katerina}},
  booktitle    = {{2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}},
  publisher    = {{IEEE}},
  title        = {{{Augmented Reality for Real-Time Decision-Making in Flood Emergencies}}},
  doi          = {{https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032}},
  year         = {{2024}},
}

@article{52587,
  author       = {{Bodden, Eric and Pottebaum, Jens and Fockel, Markus and Gräßler, Iris}},
  issn         = {{1540-7993}},
  journal      = {{IEEE Security & Privacy}},
  keywords     = {{Law, Electrical and Electronic Engineering, Computer Networks and Communications}},
  number       = {{1}},
  pages        = {{69--72}},
  publisher    = {{Institute of Electrical and Electronics Engineers (IEEE)}},
  title        = {{{Evaluating Security Through Isolation and Defense in Depth}}},
  doi          = {{10.1109/msec.2023.3336028}},
  volume       = {{22}},
  year         = {{2024}},
}

@inproceedings{56176,
  author       = {{Sennefelder, Lisa and Meier, Heiko}},
  booktitle    = {{Begegnung}},
  editor       = {{Liedke, Gunnar and Bous, Barbara and Scholz, Martin}},
  pages        = {{78--90}},
  publisher    = {{ZIEL-Verlag}},
  title        = {{{Förderung einer Vertrauenskultur als Baustein im Gesundheitsmanagement? Ein erlebnispädagogisch orientiertes Konzept für Verwaltungsorganisationen}}},
  year         = {{2024}},
}

@inproceedings{61756,
  author       = {{Scheidemann, Claus and Hemsel, Tobias and Sextro, Walter}},
  location     = {{Hannover, Germany}},
  title        = {{{Characteristic behavior of lead-free and lead-containing piezo ring ceramics in ultrasonic transducers}}},
  year         = {{2024}},
}

@inbook{57154,
  author       = {{Asiimwe, Henry and Bode, Henrik and Bogere, Paul and Freitag, Christine and Mangeni, Teddy}},
  booktitle    = {{Bildungsmedien für Erwachsene Educational Media for Adults }},
  editor       = {{Andrzejewska, Ewa and Matthes, Eva and Schütze, Sylvia and Van Wiele, Jan}},
  isbn         = {{978-3-7815-2670-9}},
  pages        = {{245–255}},
  publisher    = {{Verlag Julius Klinkhardt}},
  title        = {{{Which Media for Whom? The Implementation of Microgrids as a Trigger of Transformational Adult Learning Opportunities in Formal, Informal and Situational Settings in Times of Change}}},
  doi          = {{10.35468/6126}},
  year         = {{2024}},
}

@article{47589,
  author       = {{Krämer, Felix and Paradies, Jan and Fernández, Israel and Breher, Frank}},
  issn         = {{1755-4330}},
  journal      = {{Nature Chemistry}},
  keywords     = {{General Chemical Engineering, General Chemistry}},
  publisher    = {{Springer Science and Business Media LLC}},
  title        = {{{A crystalline aluminium–carbon-based ambiphile capable of activation and catalytic transfer of ammonia in non-aqueous media}}},
  doi          = {{10.1038/s41557-023-01340-9}},
  year         = {{2023}},
}

@book{47676,
  editor       = {{Bartz, Christina and Ruchatz, Jens and Wattolik, Eva}},
  isbn         = {{978-3-8376-6479-9}},
  publisher    = {{transcript}},
  title        = {{{Food - Media - Senses}}},
  year         = {{2023}},
}

@inproceedings{46297,
  abstract     = {{Exploratory landscape analysis (ELA) in single-objective black-box optimization relies on a comprehensive and large set of numerical features characterizing problem instances. Those foster problem understanding and serve as basis for constructing automated algorithm selection models choosing the best suited algorithm for a problem at hand based on the aforementioned features computed prior to optimization. This work specifically points to the sensitivity of a substantial proportion of these features to absolute objective values, i.e., we observe a lack of shift and scale invariance. We show that this unfortunately induces bias within automated algorithm selection models, an overfitting to specific benchmark problem sets used for training and thereby hinders generalization capabilities to unseen problems. We tackle these issues by presenting an appropriate objective normalization to be used prior to ELA feature computation and empirically illustrate the respective effectiveness focusing on the BBOB benchmark set.}},
  author       = {{Prager, Raphael Patrick and Trautmann, Heike}},
  booktitle    = {{Applications of Evolutionary Computation}},
  editor       = {{Correia, João and Smith, Stephen and Qaddoura, Raneem}},
  isbn         = {{978-3-031-30229-9}},
  pages        = {{411–425}},
  publisher    = {{Springer Nature Switzerland}},
  title        = {{{Nullifying the Inherent Bias of Non-invariant Exploratory Landscape Analysis Features}}},
  year         = {{2023}},
}

@inproceedings{46298,
  abstract     = {{The design and choice of benchmark suites are ongoing topics of discussion in the multi-objective optimization community. Some suites provide a good understanding of their Pareto sets and fronts, such as the well-known DTLZ and ZDT problems. However, they lack diversity in their landscape properties and do not provide a mechanism for creating multiple distinct problem instances. Other suites, like bi-objective BBOB, possess diverse and challenging landscape properties, but their optima are not well understood and can only be approximated empirically without any guarantees.}},
  author       = {{Schäpermeier, Lennart and Kerschke, Pascal and Grimme, Christian and Trautmann, Heike}},
  booktitle    = {{Evolutionary Multi-Criterion Optimization}},
  editor       = {{Emmerich, Michael and Deutz, André and Wang, Hao and Kononova, Anna V. and Naujoks, Boris and Li, Ke and Miettinen, Kaisa and Yevseyeva, Iryna}},
  isbn         = {{978-3-031-27250-9}},
  pages        = {{291–304}},
  publisher    = {{Springer Nature Switzerland}},
  title        = {{{Peak-A-Boo! Generating Multi-objective Multiple Peaks Benchmark Problems with Precise Pareto Sets}}},
  year         = {{2023}},
}

@inproceedings{47626,
  author       = {{Rüther, Moritz Johannes and Klippstein, Sven Helge and Schmid, Hans-Joachim}},
  booktitle    = {{PARTEC International Congress on Particle Technology - Book of Abstracts}},
  isbn         = {{ 978-3-18-990139-9}},
  issn         = {{0083-5560}},
  location     = {{Nürnberg}},
  pages        = {{172 -- 176}},
  publisher    = {{VDI Verlag GmbH}},
  title        = {{{Correlation between SLS-Powder processability and particle properties }}},
  year         = {{2023}},
}

@inproceedings{48577,
  author       = {{Henkenjohann, Mark and Nolte, Udo and Henke, Christian and Trächtler, Ansgar}},
  booktitle    = {{2023 International Conference on Unmanned Aircraft Systems (ICUAS)}},
  publisher    = {{IEEE}},
  title        = {{{Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL}}},
  doi          = {{10.1109/icuas57906.2023.10156317}},
  year         = {{2023}},
}

@inproceedings{46764,
  abstract     = {{Polymer composites represent the industry standard in injection molding for the production 
of plastic components with increased requirements in terms of heat resistance and stiffness. In the 
field of laser sintering (LS), these materials are less common so far. In order to extend the available 
material variety for the LS process, new ceramic-filled Polyamide 613 powders are investigated
within the scope of this work. Here, the resulting properties from two different powder production 
methods are compared. One filled powder is produced by dry blending and the other powder with 
the same filler and filling ratio is produced by encapsulating the filler particles inside the polymer 
particles within the dissolution-precipitation process. It was found that encapsulating the filler 
particles can provide certain benefits for the processability, for example an improved powder 
flowability or better filler dispersion. However, encapsulating the filler also alters the thermal 
properties of the precipitated powder.}},
  author       = {{Kletetzka, Ivo and Neitzel, Fabian and Schmid, Hans-Joachim}},
  booktitle    = {{Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium}},
  editor       = {{Beaman, Joseph}},
  location     = {{Austin}},
  publisher    = {{Laboratory for Freeform Fabrication and University of Texas}},
  title        = {{{Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering}}},
  volume       = {{34}},
  year         = {{2023}},
}

@inproceedings{44316,
  author       = {{Rozo Vasquez, Julian and Arian, Bahman and Kersting, Lukas and Walther, Frank and Homberg, Werner and Trächtler, Ansgar}},
  location     = {{Krakau}},
  title        = {{{Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L}}},
  year         = {{2023}},
}

@inbook{48643,
  author       = {{Akbulut Irmak, Emine Fulya and Hanses, Hendrik and Horwath, Ilona and Tröster, Thomas}},
  booktitle    = {{Climate Protection, Resource Efficiency, and Sustainable Engineering}},
  isbn         = {{9783837663778}},
  issn         = {{2703-1543}},
  publisher    = {{transcript Verlag}},
  title        = {{{Case Study III: Challenges of lightweight design, vehicles, and rescuers}}},
  doi          = {{10.14361/9783839463772-006}},
  year         = {{2023}},
}

@inproceedings{48672,
  author       = {{Schöppner, Volker and Gevers, Karina and Schraa, L. and Töws, P. and Uhlig, K. and Stommel, M. and Decker, J.}},
  location     = {{Singapur (Singapur)}},
  title        = {{{Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides}}},
  year         = {{2023}},
}

@article{48671,
  author       = {{Schöppner, Volker and Gevers, Karina and Schraa, L. and Uhlig, K. and Töws, P. and Decker, J. and Stommel, M.}},
  journal      = {{Proceedings of the 2023 International Conference on Composite Materials}},
  title        = {{{Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation}}},
  year         = {{2023}},
}