[{"type":"conference","department":[{"_id":"157"}],"date_created":"2023-11-02T08:06:11Z","abstract":[{"text":"The use of stainless steel with high strain hardening as material for self-piercing rivets is a promising approach to shorten the manufacturing process. Due to the corrosion resistance of the material and the achieved high strength within the forming process, the heat treatment and the coating can be omitted. As the strength within the rivet material is achieved by cold forming, the strength distribution within the rivet remains intact after the manufacturing process. The aim of the contribution presented is the exploitation of the potential of this strength distribution to improve the performance of the self-piercing rivets. Therefore, the scope of the examination is on the analysis of the influence of the local strength on the deformation behaviour of the rivet during joining. While it is unfeasible to manufacture rivets with any desired strength distribution, numerical simulation offers an efficient opportunity to study the effects of varying local strengths. By using a definable true strain distribution within the rivet as presetting for the simulation, different strength distributions can be modelled. Through the simulation of the joining process, the deformation behaviour of the rivet can be examined. Based on the insights of this analysis, a strength distribution is created that supports the joining of challenging material combinations consisting of high strength steel and aluminium. Finally, the approach is verified by experimental joining tests.","lang":"eng"}],"publication":"Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity.","doi":"10.1007/978-3-031-41341-4_8","language":[{"iso":"eng"}],"series_title":"Lecture Notes in Mechanical Engineering.","date_updated":"2026-02-27T10:07:14Z","intvolume":"         3","title":"Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material","year":"2023","author":[{"full_name":"Uhe, Benedikt","last_name":"Uhe","first_name":"Benedikt","id":"38131"},{"last_name":"Kuball","first_name":"Clara-Maria","full_name":"Kuball, Clara-Maria"},{"full_name":"Merklein, Marion","first_name":"Marion","last_name":"Merklein"},{"last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056"}],"place":"Cham","quality_controlled":"1","citation":{"ieee":"B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material,” in <i>Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity.</i>, 2023, vol. 3, pp. 64–71, doi: <a href=\"https://doi.org/10.1007/978-3-031-41341-4_8\">10.1007/978-3-031-41341-4_8</a>.","apa":"Uhe, B., Kuball, C.-M., Merklein, M., &#38; Meschut, G. (2023). Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material. In K. Mocellin, P.-O. Bouchard,  Régis Bigot, &#38; T. Balan (Eds.), <i>Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity.</i> (Vol. 3, pp. 64–71). Springer. <a href=\"https://doi.org/10.1007/978-3-031-41341-4_8\">https://doi.org/10.1007/978-3-031-41341-4_8</a>","short":"B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: K. Mocellin, P.-O. Bouchard,  Régis Bigot, T. Balan (Eds.), Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity., Springer, Cham, 2023, pp. 64–71.","chicago":"Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut. “Controlled Rivet Deformation During Self-Piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material.” In <i>Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity.</i>, edited by Katia Mocellin, Pierre-Olivier Bouchard,  Régis Bigot, and Tudor Balan, 3:64–71. Lecture Notes in Mechanical Engineering. Cham: Springer, 2023. <a href=\"https://doi.org/10.1007/978-3-031-41341-4_8\">https://doi.org/10.1007/978-3-031-41341-4_8</a>.","mla":"Uhe, Benedikt, et al. “Controlled Rivet Deformation During Self-Piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material.” <i>Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity.</i>, edited by Katia Mocellin et al., vol. 3, Springer, 2023, pp. 64–71, doi:<a href=\"https://doi.org/10.1007/978-3-031-41341-4_8\">10.1007/978-3-031-41341-4_8</a>.","bibtex":"@inproceedings{Uhe_Kuball_Merklein_Meschut_2023, place={Cham}, series={Lecture Notes in Mechanical Engineering.}, title={Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material}, volume={3}, DOI={<a href=\"https://doi.org/10.1007/978-3-031-41341-4_8\">10.1007/978-3-031-41341-4_8</a>}, booktitle={Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity.}, publisher={Springer}, author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut, Gerson}, editor={Mocellin, Katia and Bouchard, Pierre-Olivier and Bigot,  Régis and Balan, Tudor}, year={2023}, pages={64–71}, collection={Lecture Notes in Mechanical Engineering.} }","ama":"Uhe B, Kuball C-M, Merklein M, Meschut G. Controlled Rivet Deformation During Self-piercing Riveting Through a Tailored Strength Distribution Within the Rivet Material. In: Mocellin K, Bouchard P-O, Bigot  Régis, Balan T, eds. <i>Proceedings of the 14th International Conference on the Technology of Plasticity - Current Trends in the Technology of Plasticity.</i> Vol 3. Lecture Notes in Mechanical Engineering. Springer; 2023:64-71. doi:<a href=\"https://doi.org/10.1007/978-3-031-41341-4_8\">10.1007/978-3-031-41341-4_8</a>"},"user_id":"53912","volume":3,"editor":[{"full_name":"Mocellin, Katia","last_name":"Mocellin","first_name":"Katia"},{"first_name":"Pierre-Olivier","last_name":"Bouchard","full_name":"Bouchard, Pierre-Olivier"},{"full_name":"Bigot,  Régis","first_name":" Régis","last_name":"Bigot"},{"full_name":"Balan, Tudor","first_name":"Tudor","last_name":"Balan"}],"page":"64-71","_id":"48585","publisher":"Springer","status":"public"},{"title":"Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets","year":"2023","author":[{"id":"38131","full_name":"Uhe, Benedikt","last_name":"Uhe","first_name":"Benedikt"},{"full_name":"Kuball, Clara-Maria","last_name":"Kuball","first_name":"Clara-Maria"},{"full_name":"Merklein, Marion","first_name":"Marion","last_name":"Merklein"},{"id":"32056","orcid":"0000-0002-2763-1246","first_name":"Gerson","last_name":"Meschut","full_name":"Meschut, Gerson"}],"publication_identifier":{"issn":["2504-4494"]},"publication_status":"published","date_updated":"2026-02-27T10:16:17Z","intvolume":"         7","article_number":"193","language":[{"iso":"eng"}],"doi":"10.3390/jmmp7060193","issue":"6","publication":"Journal of Manufacturing and Materials Processing","abstract":[{"text":"The sustainability of the manufacturing industry is of special importance to increase the protection of the environment. The production of fasteners like self-piercing rivets, however, is costly, time-consuming and energy-intensive. The heat treatment and the coating, which are mandatory in conventional self-piercing rivets to achieve adequate strength, ductility and corrosion resistance, are especially crucial in this respect. Within this paper, an approach for an increase in the sustainability in fastener production is presented. The use of alternative, high strain hardening stainless steels as rivet material enables a shortening of the process chain, because post treatment of the rivets after they are formed can be omitted. As the change in rivet material and processing causes some issues along the process chain, the focus of this paper is on the holistic evaluation of the challenges within the forming of high strain hardening steel and the impact of the changed rivet properties on the joining result.","lang":"eng"}],"date_created":"2023-11-02T07:58:35Z","type":"journal_article","keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering","Mechanics of Materials"],"department":[{"_id":"157"}],"status":"public","publisher":"MDPI AG","_id":"48584","user_id":"38131","volume":7,"citation":{"short":"B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, Journal of Manufacturing and Materials Processing 7 (2023).","chicago":"Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut. “Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets.” <i>Journal of Manufacturing and Materials Processing</i> 7, no. 6 (2023). <a href=\"https://doi.org/10.3390/jmmp7060193\">https://doi.org/10.3390/jmmp7060193</a>.","apa":"Uhe, B., Kuball, C.-M., Merklein, M., &#38; Meschut, G. (2023). Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets. <i>Journal of Manufacturing and Materials Processing</i>, <i>7</i>(6), Article 193. <a href=\"https://doi.org/10.3390/jmmp7060193\">https://doi.org/10.3390/jmmp7060193</a>","ieee":"B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets,” <i>Journal of Manufacturing and Materials Processing</i>, vol. 7, no. 6, Art. no. 193, 2023, doi: <a href=\"https://doi.org/10.3390/jmmp7060193\">10.3390/jmmp7060193</a>.","ama":"Uhe B, Kuball C-M, Merklein M, Meschut G. Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets. <i>Journal of Manufacturing and Materials Processing</i>. 2023;7(6). doi:<a href=\"https://doi.org/10.3390/jmmp7060193\">10.3390/jmmp7060193</a>","bibtex":"@article{Uhe_Kuball_Merklein_Meschut_2023, title={Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets}, volume={7}, DOI={<a href=\"https://doi.org/10.3390/jmmp7060193\">10.3390/jmmp7060193</a>}, number={6193}, journal={Journal of Manufacturing and Materials Processing}, publisher={MDPI AG}, author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut, Gerson}, year={2023} }","mla":"Uhe, Benedikt, et al. “Increased Sustainability in Fastener Production with the Example of Self-Piercing Rivets.” <i>Journal of Manufacturing and Materials Processing</i>, vol. 7, no. 6, 193, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/jmmp7060193\">10.3390/jmmp7060193</a>."},"quality_controlled":"1"},{"language":[{"iso":"eng"}],"_id":"44220","publisher":"Materials Research Proceedings","doi":"10.21741/9781644902417-49","user_id":"53912","conference":{"end_date":"2023-04-05","name":"20th International Conference on Sheet Metal (SheMet) 2023","start_date":"2023-04-02","location":"Nürnberg"},"author":[{"last_name":"Uhe","first_name":"Benedikt","full_name":"Uhe, Benedikt","id":"38131"},{"last_name":"Kuball","first_name":"Clara-Maria","full_name":"Kuball, Clara-Maria"},{"last_name":"Merklein","first_name":"Marion","full_name":"Merklein, Marion"},{"id":"32056","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson"}],"title":"Approach for a sustainable process chain in manufacturing of fasteners for mechanical joining","status":"public","year":"2023","date_updated":"2026-02-27T10:19:07Z","place":"Millersville, PA, USA","date_created":"2023-04-27T10:56:34Z","department":[{"_id":"157"}],"type":"conference","citation":{"mla":"Uhe, Benedikt, et al. <i>Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical Joining</i>. Materials Research Proceedings, 2023, doi:<a href=\"https://doi.org/10.21741/9781644902417-49\">10.21741/9781644902417-49</a>.","apa":"Uhe, B., Kuball, C.-M., Merklein, M., &#38; Meschut, G. (2023). <i>Approach for a sustainable process chain in manufacturing of fasteners for mechanical joining</i>. 20th International Conference on Sheet Metal (SheMet) 2023, Nürnberg. <a href=\"https://doi.org/10.21741/9781644902417-49\">https://doi.org/10.21741/9781644902417-49</a>","ieee":"B. Uhe, C.-M. Kuball, M. Merklein, and G. Meschut, “Approach for a sustainable process chain in manufacturing of fasteners for mechanical joining,” presented at the 20th International Conference on Sheet Metal (SheMet) 2023, Nürnberg, 2023, doi: <a href=\"https://doi.org/10.21741/9781644902417-49\">10.21741/9781644902417-49</a>.","short":"B. Uhe, C.-M. Kuball, M. Merklein, G. Meschut, in: Materials Research Proceedings, Millersville, PA, USA, 2023.","ama":"Uhe B, Kuball C-M, Merklein M, Meschut G. Approach for a sustainable process chain in manufacturing of fasteners for mechanical joining. In: Materials Research Proceedings; 2023. doi:<a href=\"https://doi.org/10.21741/9781644902417-49\">10.21741/9781644902417-49</a>","chicago":"Uhe, Benedikt, Clara-Maria Kuball, Marion Merklein, and Gerson Meschut. “Approach for a Sustainable Process Chain in Manufacturing of Fasteners for Mechanical Joining.” Millersville, PA, USA: Materials Research Proceedings, 2023. <a href=\"https://doi.org/10.21741/9781644902417-49\">https://doi.org/10.21741/9781644902417-49</a>.","bibtex":"@inproceedings{Uhe_Kuball_Merklein_Meschut_2023, place={Millersville, PA, USA}, title={Approach for a sustainable process chain in manufacturing of fasteners for mechanical joining}, DOI={<a href=\"https://doi.org/10.21741/9781644902417-49\">10.21741/9781644902417-49</a>}, publisher={Materials Research Proceedings}, author={Uhe, Benedikt and Kuball, Clara-Maria and Merklein, Marion and Meschut, Gerson}, year={2023} }"},"abstract":[{"lang":"eng","text":"With regard to environmental protection, the sustainability of production processes is decisive. Mechanical joining technologies like self-piercing riveting are of special importance with regard to realising lightweight constructions in the automotive industry. However, the production of self-piercing rivets is costly, time-consuming and energy-intensive, as the rivets conventionally must be heat treated and coated in order to ensure an adequate strength, ductility and corrosion resistance. Within this paper, it is shown by the example of a newly established rivet manufacturing process how the sustainability of fastener production can be increased. The general approach in this context is the use of alternative, high strain hardening stainless steels as rivet material, which allows the omission of the post treatment of the rivets after forming. The shortening of the process chain enables a more sustainable rivet production. Thus, not only the energy consumption is reduced, but also costs, which is why the novel manufacturing process is also of interest from an economic point of view."}],"quality_controlled":"1"},{"date_created":"2024-02-01T15:55:44Z","file":[{"date_created":"2026-01-30T07:15:31Z","creator":"hemsel","content_type":"application/pdf","file_id":"63815","access_level":"open_access","file_size":608243,"file_name":"Sch23_ICAE_2023.pdf","date_updated":"2026-03-02T10:59:13Z","relation":"main_file"}],"department":[{"_id":"151"},{"_id":"49"}],"oa":"1","type":"conference","citation":{"mla":"Scheidemann, Claus, et al. <i>Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics</i>. 2023.","bibtex":"@inproceedings{Scheidemann_Hemsel_Friesen_Claes_Sextro_2023, title={Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics}, author={Scheidemann, Claus and Hemsel, Tobias and Friesen, Olga and Claes, Leander and Sextro, Walter}, year={2023} }","ama":"Scheidemann C, Hemsel T, Friesen O, Claes L, Sextro W. Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics. In: ; 2023.","ieee":"C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, and W. Sextro, “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” presented at the 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea, 2023.","apa":"Scheidemann, C., Hemsel, T., Friesen, O., Claes, L., &#38; Sextro, W. (2023). <i>Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics</i>. 7th International Conference on Advanced Electromaterials (ICAE 2023), Jeju, Korea.","short":"C. Scheidemann, T. Hemsel, O. Friesen, L. Claes, W. Sextro, in: 2023.","chicago":"Scheidemann, Claus, Tobias Hemsel, Olga Friesen, Leander Claes, and Walter Sextro. “Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics,” 2023."},"file_date_updated":"2026-03-02T10:59:13Z","project":[{"name":"FOR 5208: Modellbasierte Bestimmung nichtlinearer Eigenschaften von Piezokeramiken für Leistungsschallanwendungen (NEPTUN)","_id":"245"}],"language":[{"iso":"eng"}],"_id":"51117","user_id":"210","ddc":["620"],"author":[{"id":"38259","full_name":"Scheidemann, Claus","last_name":"Scheidemann","first_name":"Claus"},{"first_name":"Tobias","last_name":"Hemsel","full_name":"Hemsel, Tobias","id":"210"},{"id":"44026","last_name":"Friesen","first_name":"Olga","full_name":"Friesen, Olga"},{"last_name":"Claes","first_name":"Leander","orcid":"0000-0002-4393-268X","full_name":"Claes, Leander","id":"11829"},{"first_name":"Walter","last_name":"Sextro","full_name":"Sextro, Walter","id":"21220"}],"conference":{"end_date":"2023-11-03","location":"Jeju, Korea","name":"7th International Conference on Advanced Electromaterials (ICAE 2023)","start_date":"2023-10-31"},"year":"2023","status":"public","title":"Influence of Temperature and Pre-Stress on the Piezoelectric Material Behavior of Ring-Shaped Ceramics","has_accepted_license":"1","date_updated":"2026-03-02T10:59:13Z"},{"date_created":"2023-11-10T14:00:08Z","type":"conference","department":[{"_id":"660"}],"publication":"Proceedings of the European Symposium on Artificial Neural Networks (ESANN)","citation":{"ieee":"F. Fumagalli, M. Muschalik, E. Hüllermeier, and B. Hammer, “On Feature Removal for Explainability in Dynamic Environments,” presented at the ESANN 2023 - European Symposium on Artificial Neural Networks, Computational Intelligence and Machine Learning, Bruges (Belgium) and online, 2023, doi: <a href=\"https://doi.org/10.14428/ESANN/2023.ES2023-148\">10.14428/ESANN/2023.ES2023-148</a>.","apa":"Fumagalli, F., Muschalik, M., Hüllermeier, E., &#38; Hammer, B. (2023). On Feature Removal for Explainability in Dynamic Environments. <i>Proceedings of the European Symposium on Artificial Neural Networks (ESANN)</i>. ESANN 2023 - European Symposium on Artificial Neural Networks, Computational Intelligence and Machine Learning, Bruges (Belgium) and online. <a href=\"https://doi.org/10.14428/ESANN/2023.ES2023-148\">https://doi.org/10.14428/ESANN/2023.ES2023-148</a>","mla":"Fumagalli, Fabian, et al. “On Feature Removal for Explainability in Dynamic Environments.” <i>Proceedings of the European Symposium on Artificial Neural Networks (ESANN)</i>, 2023, doi:<a href=\"https://doi.org/10.14428/ESANN/2023.ES2023-148\">10.14428/ESANN/2023.ES2023-148</a>.","bibtex":"@inproceedings{Fumagalli_Muschalik_Hüllermeier_Hammer_2023, title={On Feature Removal for Explainability in Dynamic Environments}, DOI={<a href=\"https://doi.org/10.14428/ESANN/2023.ES2023-148\">10.14428/ESANN/2023.ES2023-148</a>}, booktitle={Proceedings of the European Symposium on Artificial Neural Networks (ESANN)}, author={Fumagalli, Fabian and Muschalik, Maximilian and Hüllermeier, Eyke and Hammer, Barbara}, year={2023} }","chicago":"Fumagalli, Fabian, Maximilian Muschalik, Eyke Hüllermeier, and Barbara Hammer. “On Feature Removal for Explainability in Dynamic Environments.” In <i>Proceedings of the European Symposium on Artificial Neural Networks (ESANN)</i>, 2023. <a href=\"https://doi.org/10.14428/ESANN/2023.ES2023-148\">https://doi.org/10.14428/ESANN/2023.ES2023-148</a>.","ama":"Fumagalli F, Muschalik M, Hüllermeier E, Hammer B. On Feature Removal for Explainability in Dynamic Environments. In: <i>Proceedings of the European Symposium on Artificial Neural Networks (ESANN)</i>. ; 2023. doi:<a href=\"https://doi.org/10.14428/ESANN/2023.ES2023-148\">10.14428/ESANN/2023.ES2023-148</a>","short":"F. Fumagalli, M. Muschalik, E. Hüllermeier, B. Hammer, in: Proceedings of the European Symposium on Artificial Neural Networks (ESANN), 2023."},"project":[{"name":"TRR 318 - C3: TRR 318 - Subproject C3","_id":"126"},{"_id":"117","name":"TRR 318 - C: TRR 318 - Project Area C"},{"name":"TRR 318: TRR 318 - Erklärbarkeit konstruieren","_id":"109"}],"language":[{"iso":"eng"}],"_id":"48775","doi":"10.14428/ESANN/2023.ES2023-148","user_id":"93420","status":"public","year":"2023","title":"On Feature Removal for Explainability in Dynamic Environments","conference":{"location":"Bruges (Belgium) and online","name":"ESANN 2023 - European Symposium on Artificial Neural Networks, Computational Intelligence and Machine Learning"},"author":[{"id":"93420","last_name":"Fumagalli","first_name":"Fabian","full_name":"Fumagalli, Fabian"},{"first_name":"Maximilian","last_name":"Muschalik","full_name":"Muschalik, Maximilian"},{"id":"48129","full_name":"Hüllermeier, Eyke","last_name":"Hüllermeier","first_name":"Eyke"},{"full_name":"Hammer, Barbara","first_name":"Barbara","last_name":"Hammer"}],"publication_identifier":{"unknown":[" 978-2-87587-088-9"]},"date_updated":"2025-09-11T16:26:21Z","publication_status":"published"},{"citation":{"ieee":"J. Beimdiek and H.-J. Schmid, “Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system,” presented at the International Congress on Particle Technology | PARTEC 2023, Nürnberg, 2023.","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System</i>. VDI Verlag, 2023.","apa":"Beimdiek, J., &#38; Schmid, H.-J. (2023). <i>Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system</i>. International Congress on Particle Technology | PARTEC 2023, Nürnberg.","bibtex":"@inproceedings{Beimdiek_Schmid_2023, place={Düsseldorf}, title={Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system}, publisher={VDI Verlag}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2023} }","ama":"Beimdiek J, Schmid H-J. Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system. In: VDI Verlag; 2023.","short":"J. Beimdiek, H.-J. Schmid, in: VDI Verlag, Düsseldorf, 2023.","chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “Entrained Flow SCR Using an In-Situ Synthesis of Catalyst Particles for a Combined Flue Gas Cleaning System.” Düsseldorf: VDI Verlag, 2023."},"file_date_updated":"2024-02-21T16:27:47Z","department":[{"_id":"9"},{"_id":"150"}],"type":"conference","place":"Düsseldorf","date_created":"2024-02-21T16:28:49Z","file":[{"date_created":"2024-02-21T16:27:47Z","creator":"jludwig","success":1,"content_type":"application/pdf","file_id":"51728","date_updated":"2024-02-21T16:27:47Z","relation":"main_file","file_size":130920,"access_level":"closed","file_name":"Extended Abstract_PARTEC.pdf"}],"has_accepted_license":"1","date_updated":"2025-09-18T08:53:29Z","conference":{"end_date":"2023-09-28","location":"Nürnberg","start_date":"2023-09-26","name":"International Congress on Particle Technology | PARTEC 2023"},"author":[{"id":"45788","last_name":"Beimdiek","orcid":"0009-0001-1348-496X","first_name":"Janis","full_name":"Beimdiek, Janis"},{"full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","id":"464"}],"status":"public","year":"2023","title":"Entrained flow SCR using an in-situ synthesis of catalyst particles for a combined flue gas cleaning system","ddc":["660"],"user_id":"45788","publisher":"VDI Verlag","_id":"51727","language":[{"iso":"eng"}]},{"_id":"51726","language":[{"iso":"ger"}],"user_id":"45788","ddc":["660"],"status":"public","year":"2023","title":"Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)","author":[{"id":"45788","first_name":"Janis","orcid":"0009-0001-1348-496X","last_name":"Beimdiek","full_name":"Beimdiek, Janis"},{"last_name":"Schmid","first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","id":"464"}],"conference":{"end_date":"2023-03-29","start_date":"2023-03-28","name":"Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023","location":"Paderborn"},"date_updated":"2025-09-18T08:49:17Z","has_accepted_license":"1","file":[{"creator":"jludwig","date_created":"2024-02-21T16:30:16Z","relation":"main_file","date_updated":"2024-02-21T16:30:16Z","file_name":"Poster_Gasreinigung.pdf","file_size":803920,"access_level":"closed","file_id":"51729","content_type":"application/pdf","success":1}],"date_created":"2024-02-21T16:18:17Z","place":"Paderborn","type":"conference_abstract","department":[{"_id":"9"},{"_id":"150"}],"file_date_updated":"2024-02-21T16:30:16Z","citation":{"chicago":"Beimdiek, Janis, and Hans-Joachim Schmid. “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster).” Paderborn, 2023.","short":"J. Beimdiek, H.-J. Schmid, in: Paderborn, 2023.","apa":"Beimdiek, J., &#38; Schmid, H.-J. (2023). <i>Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)</i>. Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn.","ieee":"J. Beimdiek and H.-J. Schmid, “Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster),” presented at the Jahrestreffen der DECHEMA Fachgruppe Gasreinigung 2023, Paderborn, 2023.","ama":"Beimdiek J, Schmid H-J. Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster). In: ; 2023.","bibtex":"@inproceedings{Beimdiek_Schmid_2023, place={Paderborn}, title={Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)}, author={Beimdiek, Janis and Schmid, Hans-Joachim}, year={2023} }","mla":"Beimdiek, Janis, and Hans-Joachim Schmid. <i>Neuartige Flugstrom SCR an online synthetisierten, nanoskaligen Katalysatorpartikeln in einem kombinierten Gasreinigungsprozess (Poster)</i>. 2023."}},{"date_created":"2024-02-05T12:59:39Z","place":"Nürnberg","department":[{"_id":"150"}],"keyword":["Flame Stability","Particle Sample Extraction","SMPS","Impurities"],"type":"conference_abstract","citation":{"ieee":"O. Massopo <i>et al.</i>, “Influence of atomization on the particle formation in spray flame pyrolysis (Presentation),” presented at the International Congress of Particle Technology, Nürnberg, 2023.","apa":"Massopo, O., Tischendorf, R., Schmid, H.-J., Fröde, F., Grenga, T., Pitsch, H., Bieber, M., Reddemann, M., &#38; Kneer, R. (2023). <i>Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)</i>. International Congress of Particle Technology, Nürnberg.","short":"O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, T. Grenga, H. Pitsch, M. Bieber, M. Reddemann, R. Kneer, in: International Congress of Particle Technology, Nürnberg, 2023.","chicago":"Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde, Temistocle Grenga, Heinz Pitsch, Malte Bieber, Manuel Reddemann, and Reinhold Kneer. “Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation).” Nürnberg: International Congress of Particle Technology, 2023.","mla":"Massopo, Orlando, et al. <i>Influence of Atomization on the Particle Formation in Spray Flame Pyrolysis (Presentation)</i>. International Congress of Particle Technology, 2023.","bibtex":"@inproceedings{Massopo_Tischendorf_Schmid_Fröde_Grenga_Pitsch_Bieber_Reddemann_Kneer_2023, place={Nürnberg}, title={Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)}, publisher={International Congress of Particle Technology}, author={Massopo, Orlando and Tischendorf, Ricardo and Schmid, Hans-Joachim and Fröde, Fabian and Grenga, Temistocle and Pitsch, Heinz and Bieber, Malte and Reddemann, Manuel and Kneer, Reinhold}, year={2023} }","ama":"Massopo O, Tischendorf R, Schmid H-J, et al. Influence of atomization on the particle formation in spray flame pyrolysis (Presentation). In: International Congress of Particle Technology; 2023."},"_id":"51147","language":[{"iso":"eng"}],"publisher":"International Congress of Particle Technology","user_id":"98419","author":[{"id":"98419","first_name":"Orlando","last_name":"Massopo","full_name":"Massopo, Orlando"},{"id":"67002","full_name":"Tischendorf, Ricardo","first_name":"Ricardo","last_name":"Tischendorf"},{"id":"464","orcid":"000-0001-8590-1921","first_name":"Hans-Joachim","last_name":"Schmid","full_name":"Schmid, Hans-Joachim"},{"full_name":"Fröde, Fabian","last_name":"Fröde","first_name":"Fabian"},{"first_name":"Temistocle","last_name":"Grenga","full_name":"Grenga, Temistocle"},{"full_name":"Pitsch, Heinz","first_name":"Heinz","last_name":"Pitsch"},{"first_name":"Malte","last_name":"Bieber","full_name":"Bieber, Malte"},{"full_name":"Reddemann, Manuel","last_name":"Reddemann","first_name":"Manuel"},{"full_name":"Kneer, Reinhold","first_name":"Reinhold","last_name":"Kneer"}],"conference":{"end_date":"2023-09-28","start_date":"2023-09-26","name":"International Congress of Particle Technology","location":"Nürnberg"},"title":"Influence of atomization on the particle formation in spray flame pyrolysis (Presentation)","status":"public","year":"2023","date_updated":"2025-09-18T10:49:39Z"},{"citation":{"ama":"Massopo O, Tischendorf R, Schmid H-J, et al. Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag). In: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik; 2023.","bibtex":"@inproceedings{Massopo_Tischendorf_Schmid_Fröde_Pitsch_Reddemann_Grenga_Kneer_2023, place={Paderborn}, title={Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)}, publisher={Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik}, author={Massopo, Orlando and Tischendorf, Ricardo and Schmid, Hans-Joachim and Fröde, Fabian and Pitsch, Heinz and Reddemann, Manuel and Grenga, Temistocle and Kneer, Reinhold}, year={2023} }","mla":"Massopo, Orlando, et al. <i>Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag)</i>. Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, 2023.","short":"O. Massopo, R. Tischendorf, H.-J. Schmid, F. Fröde, H. Pitsch, M. Reddemann, T. Grenga, R. Kneer, in: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023.","chicago":"Massopo, Orlando, Ricardo Tischendorf, Hans-Joachim Schmid, Fabian Fröde, Heinz Pitsch, Manuel Reddemann, Temistocle Grenga, and Reinhold Kneer. “Einfluss Der Zerstäubung Auf DiePartikelbildung Bei Der Sprayflammenpyrolyse (Vortrag).” Paderborn: Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, 2023.","apa":"Massopo, O., Tischendorf, R., Schmid, H.-J., Fröde, F., Pitsch, H., Reddemann, M., Grenga, T., &#38; Kneer, R. (2023). <i>Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)</i>. Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn.","ieee":"O. Massopo <i>et al.</i>, “Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag),” presented at the Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik, Paderborn, 2023."},"type":"conference_abstract","keyword":["SpraySyn","Flammenspraypyrolyse","Maghemite Nanopartikel","Gas to particle-Syntheseweg","Probennahme","Verunreinigung"],"department":[{"_id":"150"}],"place":"Paderborn","date_created":"2024-02-05T12:37:04Z","date_updated":"2025-09-18T11:16:36Z","title":"Einfluss der Zerstäubung auf diePartikelbildung bei der Sprayflammenpyrolyse (Vortrag)","status":"public","year":"2023","conference":{"start_date":"2023-03-28","name":"Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik","location":"Paderborn","end_date":"2023-03-30"},"author":[{"id":"98419","first_name":"Orlando","last_name":"Massopo","full_name":"Massopo, Orlando"},{"id":"67002","last_name":"Tischendorf","first_name":"Ricardo","full_name":"Tischendorf, Ricardo"},{"full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464"},{"full_name":"Fröde, Fabian","first_name":"Fabian","last_name":"Fröde"},{"full_name":"Pitsch, Heinz","last_name":"Pitsch","first_name":"Heinz"},{"last_name":"Reddemann","first_name":"Manuel","full_name":"Reddemann, Manuel"},{"last_name":"Grenga","first_name":"Temistocle","full_name":"Grenga, Temistocle"},{"full_name":"Kneer, Reinhold","first_name":"Reinhold","last_name":"Kneer"}],"user_id":"98419","_id":"51142","language":[{"iso":"eng"}],"publisher":"Jahrestreffen der DECHEMA-Fachgruppen Aerosoltechnik, Gasreinigung, Mehrphasenströmung und Partikelmesstechnik"},{"author":[{"first_name":"Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X","full_name":"Gräßler, Iris","id":"47565"},{"id":"405","orcid":"http://orcid.org/0000-0001-8778-2989","first_name":"Jens","last_name":"Pottebaum","full_name":"Pottebaum, Jens"},{"id":"67161","first_name":"Dominik","last_name":"Wiechel","full_name":"Wiechel, Dominik"},{"id":"67999","full_name":"Rarbach, Sven","first_name":"Sven","last_name":"Rarbach"},{"full_name":"Jacobs, Georg","first_name":"Georg","last_name":"Jacobs"},{"full_name":"Höpfner, Gregor","first_name":"Gregor","last_name":"Höpfner"},{"full_name":"Menninger, Bastian","last_name":"Menninger","first_name":"Bastian"},{"full_name":"Schmitz, Jan Niklas","first_name":"Jan Niklas","last_name":"Schmitz"},{"full_name":"Holland, Martin","first_name":"Martin","last_name":"Holland"},{"full_name":"Zeifang, Rainer","first_name":"Rainer","last_name":"Zeifang"},{"full_name":"Trautheim-Hofmann, Andreas","last_name":"Trautheim-Hofmann","first_name":"Andreas"},{"full_name":"Grasedieck, Paul","first_name":"Paul","last_name":"Grasedieck"},{"first_name":"Christian","last_name":"Gentili","full_name":"Gentili, Christian"},{"full_name":"Lüßen, Florian ","first_name":"Florian ","last_name":"Lüßen"},{"full_name":"Muggeo, Christian","first_name":"Christian","last_name":"Muggeo"},{"full_name":"Pfeiffer, Till","last_name":"Pfeiffer","first_name":"Till"},{"full_name":"Holzer, Boris","last_name":"Holzer","first_name":"Boris"},{"full_name":"Wendler, Svenja","first_name":"Svenja","last_name":"Wendler"},{"last_name":"Winter","first_name":"Eckert","full_name":"Winter, Eckert"},{"last_name":"Kowalke","first_name":"Daniel","full_name":"Kowalke, Daniel"},{"full_name":"Anger, Karsten","first_name":"Karsten","last_name":"Anger"},{"full_name":"Eckert, Simon","last_name":"Eckert","first_name":"Simon"}],"status":"public","year":"2023","title":"ImPaKT - IKT-befähigte modellbasierte Auswirkungsanalyse in der Produktentwicklung : Schlussbericht zum BMBF-Vorhaben","date_updated":"2025-11-28T10:44:50Z","_id":"62687","language":[{"iso":"eng"}],"publisher":"LibreCat University","main_file_link":[{"url":"https://www.tib.eu/de/suchen?tx_tibsearch_search%5Baction%5D=download&tx_tibsearch_search%5Bcontroller%5D=Download&tx_tibsearch_search%5Bdocid%5D=TIBKAT%3A1928342884&cHash=9467f4179e2f8b10fa9d64dba390ce4f#download-mark","open_access":"1"}],"doi":"10.2314/KXP:1928342884","user_id":"67999","citation":{"chicago":"Gräßler, Iris, Jens Pottebaum, Dominik Wiechel, Sven Rarbach, Georg Jacobs, Gregor Höpfner, Bastian Menninger, et al. <i>ImPaKT - IKT-Befähigte Modellbasierte Auswirkungsanalyse in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben</i>. LibreCat University, 2023. <a href=\"https://doi.org/10.2314/KXP:1928342884\">https://doi.org/10.2314/KXP:1928342884</a>.","short":"I. Gräßler, J. Pottebaum, D. Wiechel, S. Rarbach, G. Jacobs, G. Höpfner, B. Menninger, J.N. Schmitz, M. Holland, R. Zeifang, A. Trautheim-Hofmann, P. Grasedieck, C. Gentili, F. Lüßen, C. Muggeo, T. Pfeiffer, B. Holzer, S. Wendler, E. Winter, D. Kowalke, K. Anger, S. Eckert, ImPaKT - IKT-Befähigte Modellbasierte Auswirkungsanalyse in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben, LibreCat University, 2023.","ieee":"I. Gräßler <i>et al.</i>, <i>ImPaKT - IKT-befähigte modellbasierte Auswirkungsanalyse in der Produktentwicklung : Schlussbericht zum BMBF-Vorhaben</i>. LibreCat University, 2023.","apa":"Gräßler, I., Pottebaum, J., Wiechel, D., Rarbach, S., Jacobs, G., Höpfner, G., Menninger, B., Schmitz, J. N., Holland, M., Zeifang, R., Trautheim-Hofmann, A., Grasedieck, P., Gentili, C., Lüßen, F., Muggeo, C., Pfeiffer, T., Holzer, B., Wendler, S., Winter, E., … Eckert, S. (2023). <i>ImPaKT - IKT-befähigte modellbasierte Auswirkungsanalyse in der Produktentwicklung : Schlussbericht zum BMBF-Vorhaben</i>. LibreCat University. <a href=\"https://doi.org/10.2314/KXP:1928342884\">https://doi.org/10.2314/KXP:1928342884</a>","bibtex":"@book{Gräßler_Pottebaum_Wiechel_Rarbach_Jacobs_Höpfner_Menninger_Schmitz_Holland_Zeifang_et al._2023, title={ImPaKT - IKT-befähigte modellbasierte Auswirkungsanalyse in der Produktentwicklung : Schlussbericht zum BMBF-Vorhaben}, DOI={<a href=\"https://doi.org/10.2314/KXP:1928342884\">10.2314/KXP:1928342884</a>}, publisher={LibreCat University}, author={Gräßler, Iris and Pottebaum, Jens and Wiechel, Dominik and Rarbach, Sven and Jacobs, Georg and Höpfner, Gregor and Menninger, Bastian and Schmitz, Jan Niklas and Holland, Martin and Zeifang, Rainer and et al.}, year={2023} }","ama":"Gräßler I, Pottebaum J, Wiechel D, et al. <i>ImPaKT - IKT-Befähigte Modellbasierte Auswirkungsanalyse in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben</i>. LibreCat University; 2023. doi:<a href=\"https://doi.org/10.2314/KXP:1928342884\">10.2314/KXP:1928342884</a>","mla":"Gräßler, Iris, et al. <i>ImPaKT - IKT-Befähigte Modellbasierte Auswirkungsanalyse in Der Produktentwicklung : Schlussbericht Zum BMBF-Vorhaben</i>. LibreCat University, 2023, doi:<a href=\"https://doi.org/10.2314/KXP:1928342884\">10.2314/KXP:1928342884</a>."},"date_created":"2025-11-28T10:42:51Z","oa":"1","department":[{"_id":"152"}],"type":"report"},{"project":[{"name":"PONyDAC: PONyDAC II - Präziser Optischer Nyquist-Puls-Synthesizer DAC","_id":"302"},{"_id":"175","name":"TRR 142; TP C11: Kompakte Photonenpaar-Quelle mit ultraschnellen Modulatoren auf Basis von CMOS und LNOI"}],"abstract":[{"text":"A frequency-flexible Nyquist pulse synthesizer is presented with optical pulse bandwidths up to fopt=100 GHz and repetition rates equal to fopt/9, fabricated in an electronic-photonic co-integrated platform utilizing linear on-chip drivers.","lang":"eng"}],"citation":{"ama":"Kress C, Schwabe T, Silberhorn C, Scheytt JC. Generation of 100 GHz Periodic Nyquist Pulses using Cascaded Mach-Zehnder Modulators in a Silicon Electronic-Photonic Platform. In: <i> Conference on Lasers and Electro-Optics (CLEO) 2023</i>. Optica Publishing Group; 2023. doi:<a href=\"https://doi.org/10.1364/CLEO_SI.2023.SF1P.6\">https://doi.org/10.1364/CLEO_SI.2023.SF1P.6</a>","bibtex":"@inproceedings{Kress_Schwabe_Silberhorn_Scheytt_2023, title={Generation of 100 GHz Periodic Nyquist Pulses using Cascaded Mach-Zehnder Modulators in a Silicon Electronic-Photonic Platform}, DOI={<a href=\"https://doi.org/10.1364/CLEO_SI.2023.SF1P.6\">https://doi.org/10.1364/CLEO_SI.2023.SF1P.6</a>}, booktitle={ Conference on Lasers and Electro-Optics (CLEO) 2023}, publisher={Optica Publishing Group}, author={Kress, Christian and Schwabe, Tobias and Silberhorn, Christine and Scheytt, J. Christoph}, year={2023} }","mla":"Kress, Christian, et al. “Generation of 100 GHz Periodic Nyquist Pulses Using Cascaded Mach-Zehnder Modulators in a Silicon Electronic-Photonic Platform.” <i> Conference on Lasers and Electro-Optics (CLEO) 2023</i>, Optica Publishing Group, 2023, doi:<a href=\"https://doi.org/10.1364/CLEO_SI.2023.SF1P.6\">https://doi.org/10.1364/CLEO_SI.2023.SF1P.6</a>.","short":"C. Kress, T. Schwabe, C. Silberhorn, J.C. Scheytt, in:  Conference on Lasers and Electro-Optics (CLEO) 2023, Optica Publishing Group, 2023.","chicago":"Kress, Christian, Tobias Schwabe, Christine Silberhorn, and J. Christoph Scheytt. “Generation of 100 GHz Periodic Nyquist Pulses Using Cascaded Mach-Zehnder Modulators in a Silicon Electronic-Photonic Platform.” In <i> Conference on Lasers and Electro-Optics (CLEO) 2023</i>. Optica Publishing Group, 2023. <a href=\"https://doi.org/10.1364/CLEO_SI.2023.SF1P.6\">https://doi.org/10.1364/CLEO_SI.2023.SF1P.6</a>.","apa":"Kress, C., Schwabe, T., Silberhorn, C., &#38; Scheytt, J. C. (2023). Generation of 100 GHz Periodic Nyquist Pulses using Cascaded Mach-Zehnder Modulators in a Silicon Electronic-Photonic Platform. <i> Conference on Lasers and Electro-Optics (CLEO) 2023</i>.  Conference on Lasers and Electro-Optics (CLEO), San Jose, CA, USA. <a href=\"https://doi.org/10.1364/CLEO_SI.2023.SF1P.6\">https://doi.org/10.1364/CLEO_SI.2023.SF1P.6</a>","ieee":"C. Kress, T. Schwabe, C. Silberhorn, and J. C. Scheytt, “Generation of 100 GHz Periodic Nyquist Pulses using Cascaded Mach-Zehnder Modulators in a Silicon Electronic-Photonic Platform,” presented at the  Conference on Lasers and Electro-Optics (CLEO), San Jose, CA, USA, 2023, doi: <a href=\"https://doi.org/10.1364/CLEO_SI.2023.SF1P.6\">https://doi.org/10.1364/CLEO_SI.2023.SF1P.6</a>."},"publication":" Conference on Lasers and Electro-Optics (CLEO) 2023","department":[{"_id":"58"},{"_id":"230"},{"_id":"623"}],"type":"conference","date_created":"2023-06-12T10:25:25Z","date_updated":"2025-12-12T11:26:12Z","author":[{"id":"13256","full_name":"Kress, Christian","last_name":"Kress","orcid":"0000-0002-4403-2237","first_name":"Christian"},{"id":"39217","full_name":"Schwabe, Tobias","last_name":"Schwabe","first_name":"Tobias"},{"id":"26263","last_name":"Silberhorn","first_name":"Christine","full_name":"Silberhorn, Christine"},{"full_name":"Scheytt, J. Christoph","first_name":"J. Christoph","orcid":"0000-0002-5950-6618 ","last_name":"Scheytt","id":"37144"}],"conference":{"name":" Conference on Lasers and Electro-Optics (CLEO)","start_date":"2023-05-08","location":"San Jose, CA, USA","end_date":"2023-05-12"},"year":"2023","status":"public","title":"Generation of 100 GHz Periodic Nyquist Pulses using Cascaded Mach-Zehnder Modulators in a Silicon Electronic-Photonic Platform","user_id":"13256","doi":"https://doi.org/10.1364/CLEO_SI.2023.SF1P.6","publisher":"Optica Publishing Group","_id":"45578","language":[{"iso":"eng"}]},{"series_title":"Studien zur deutschen Sprache","_id":"48582","language":[{"iso":"ger"}],"publisher":"Narr Francke Attempto Verlag","editor":[{"first_name":"Michael","last_name":"Beißwenger","full_name":"Beißwenger, Michael"},{"last_name":"Gredel","first_name":"Eva","full_name":"Gredel, Eva"},{"last_name":"Lemnitzer","first_name":"Lothar","full_name":"Lemnitzer, Lothar"},{"full_name":" Schneider, Roman","first_name":"Roman","last_name":" Schneider"}],"user_id":"89571","publication_identifier":{"isbn":["978-3-8233-9610-9"]},"author":[{"last_name":"Weber","first_name":"Tassja","full_name":"Weber, Tassja","id":"89571"},{"full_name":"Flinz, Carolina","first_name":"Carolina","last_name":"Flinz"},{"last_name":"Mell","first_name":"Ruth","full_name":"Mell, Ruth"},{"last_name":"Möhrs","first_name":"Christine","full_name":"Möhrs, Christine"}],"year":"2023","status":"public","title":"Korpora für Deutsch als Fremdsprache – Potenziale und Perspektiven ","publication_status":"published","date_updated":"2025-12-16T14:58:47Z","date_created":"2023-11-01T10:24:10Z","place":"Tübingen","type":"book_chapter","citation":{"ama":"Weber T, Flinz C, Mell R, Möhrs C. Korpora für Deutsch als Fremdsprache – Potenziale und Perspektiven . In: Beißwenger M, Gredel E, Lemnitzer L,  Schneider R, eds. <i> Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen</i>. Studien zur deutschen Sprache. Narr Francke Attempto Verlag; 2023.","bibtex":"@inbook{Weber_Flinz_Mell_Möhrs_2023, place={Tübingen}, series={Studien zur deutschen Sprache}, title={Korpora für Deutsch als Fremdsprache – Potenziale und Perspektiven }, booktitle={ Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen}, publisher={Narr Francke Attempto Verlag}, author={Weber, Tassja and Flinz, Carolina and Mell, Ruth and Möhrs, Christine}, editor={Beißwenger, Michael and Gredel, Eva and Lemnitzer, Lothar and  Schneider, Roman}, year={2023}, collection={Studien zur deutschen Sprache} }","mla":"Weber, Tassja, et al. “Korpora für Deutsch als Fremdsprache – Potenziale und Perspektiven .” <i> Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen</i>, edited by Michael Beißwenger et al., Narr Francke Attempto Verlag, 2023.","short":"T. Weber, C. Flinz, R. Mell, C. Möhrs, in: M. Beißwenger, E. Gredel, L. Lemnitzer, R.  Schneider (Eds.),  Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen, Narr Francke Attempto Verlag, Tübingen, 2023.","chicago":"Weber, Tassja, Carolina Flinz, Ruth Mell, and Christine Möhrs. “Korpora für Deutsch als Fremdsprache – Potenziale und Perspektiven .” In <i> Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen</i>, edited by Michael Beißwenger, Eva Gredel, Lothar Lemnitzer, and Roman  Schneider. Studien zur deutschen Sprache. Tübingen: Narr Francke Attempto Verlag, 2023.","apa":"Weber, T., Flinz, C., Mell, R., &#38; Möhrs, C. (2023). Korpora für Deutsch als Fremdsprache – Potenziale und Perspektiven . In M. Beißwenger, E. Gredel, L. Lemnitzer, &#38; R.  Schneider (Eds.), <i> Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen</i>. Narr Francke Attempto Verlag.","ieee":"T. Weber, C. Flinz, R. Mell, and C. Möhrs, “Korpora für Deutsch als Fremdsprache – Potenziale und Perspektiven ,” in <i> Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen</i>, M. Beißwenger, E. Gredel, L. Lemnitzer, and R.  Schneider, Eds. Tübingen: Narr Francke Attempto Verlag, 2023."},"publication":" Korpusgestützte Sprachanalyse. Grundlagen, Anwendungen und Analysen"},{"series_title":"Transformation by Automation","language":[{"iso":"ger"}],"doi":"10.51202/9783181024195-863","title":"Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends","year":"2023","author":[{"first_name":"Iris","orcid":"0000-0001-5765-971X","last_name":"Gräßler","full_name":"Gräßler, Iris","id":"47565"},{"full_name":"Tusek, Alena Marie","last_name":"Tusek","first_name":"Alena Marie","id":"59370"},{"full_name":"Özcan, Deniz","last_name":"Özcan","first_name":"Deniz","id":"58595"}],"corporate_editor":["VDI Wissensforum GmbH"],"publication_identifier":{"isbn":["9783181024195"]},"date_updated":"2024-11-19T10:59:42Z","publication_status":"published","intvolume":"      2419","date_created":"2023-08-15T07:13:18Z","type":"conference","department":[{"_id":"152"}],"publication":"Automation 2023","page":"863 - 874","publisher":"VDI Verlag","_id":"46490","user_id":"59370","volume":2419,"status":"public","conference":{"end_date":"2023-06-28","name":"VDI Automation","start_date":"2023-06-27","location":"Baden-Baden"},"place":"Düsseldorf","citation":{"mla":"Gräßler, Iris, et al. “Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends.” <i>Automation 2023</i>, edited by VDI Wissensforum GmbH, vol. 2419, VDI Verlag, 2023, pp. 863–74, doi:<a href=\"https://doi.org/10.51202/9783181024195-863\">10.51202/9783181024195-863</a>.","bibtex":"@inproceedings{Gräßler_Tusek_Özcan_2023, place={Düsseldorf}, series={Transformation by Automation}, title={Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends}, volume={2419}, DOI={<a href=\"https://doi.org/10.51202/9783181024195-863\">10.51202/9783181024195-863</a>}, booktitle={Automation 2023}, publisher={VDI Verlag}, author={Gräßler, Iris and Tusek, Alena Marie and Özcan, Deniz}, editor={VDI Wissensforum GmbH}, year={2023}, pages={863–874}, collection={Transformation by Automation} }","ama":"Gräßler I, Tusek AM, Özcan D. Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends. In: VDI Wissensforum GmbH, ed. <i>Automation 2023</i>. Vol 2419. Transformation by Automation. VDI Verlag; 2023:863-874. doi:<a href=\"https://doi.org/10.51202/9783181024195-863\">10.51202/9783181024195-863</a>","ieee":"I. Gräßler, A. M. Tusek, and D. Özcan, “Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends,” in <i>Automation 2023</i>, Baden-Baden, 2023, vol. 2419, pp. 863–874, doi: <a href=\"https://doi.org/10.51202/9783181024195-863\">10.51202/9783181024195-863</a>.","apa":"Gräßler, I., Tusek, A. M., &#38; Özcan, D. (2023). Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends. In VDI Wissensforum GmbH (Ed.), <i>Automation 2023</i> (Vol. 2419, pp. 863–874). VDI Verlag. <a href=\"https://doi.org/10.51202/9783181024195-863\">https://doi.org/10.51202/9783181024195-863</a>","short":"I. Gräßler, A.M. Tusek, D. Özcan, in: VDI Wissensforum GmbH (Ed.), Automation 2023, VDI Verlag, Düsseldorf, 2023, pp. 863–874.","chicago":"Gräßler, Iris, Alena Marie Tusek, and Deniz Özcan. “Entwicklung zukunftsfähiger Geschäftsmodelle in der Automatisierungstechnik anhand von Megatrends.” In <i>Automation 2023</i>, edited by VDI Wissensforum GmbH, 2419:863–74. Transformation by Automation. Düsseldorf: VDI Verlag, 2023. <a href=\"https://doi.org/10.51202/9783181024195-863\">https://doi.org/10.51202/9783181024195-863</a>."},"quality_controlled":"1"},{"year":"2023","status":"public","title":"Aus Erklärvideos lernen","author":[{"id":"84533","first_name":"Christoph","last_name":"Kulgemeyer","full_name":"Kulgemeyer, Christoph"},{"id":"76974","full_name":"Sterzing, Fabian Gabriel","first_name":"Fabian Gabriel","last_name":"Sterzing"},{"orcid":"https://orcid.org/0000-0002-4220-930X","last_name":"Hörnlein","first_name":"Madeleine","full_name":"Hörnlein, Madeleine","id":"51082"}],"publication_identifier":{"unknown":["ISBN 978-3-7727-1700-0 ","ISBN 978-3-7727-1701-7 "]},"date_updated":"2024-12-12T14:28:38Z","page":"230-244","_id":"45277","language":[{"iso":"ger"}],"publisher":"Klett Kallmeyer","user_id":"51082","editor":[{"first_name":"Thomas","last_name":"Wilhelm","full_name":"Wilhelm, Thomas"}],"publication":"Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven","citation":{"mla":"Kulgemeyer, Christoph, et al. “Aus Erklärvideos lernen.” <i>Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven</i>, edited by Thomas Wilhelm, Klett Kallmeyer, 2023, pp. 230–44.","ama":"Kulgemeyer C, Sterzing FG, Hörnlein M. Aus Erklärvideos lernen. In: Wilhelm T, ed. <i>Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven</i>. Klett Kallmeyer; 2023:230-244.","bibtex":"@inbook{Kulgemeyer_Sterzing_Hörnlein_2023, place={Hannover}, title={Aus Erklärvideos lernen}, booktitle={Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven}, publisher={Klett Kallmeyer}, author={Kulgemeyer, Christoph and Sterzing, Fabian Gabriel and Hörnlein, Madeleine}, editor={Wilhelm, Thomas}, year={2023}, pages={230–244} }","apa":"Kulgemeyer, C., Sterzing, F. G., &#38; Hörnlein, M. (2023). Aus Erklärvideos lernen. In T. Wilhelm (Ed.), <i>Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven</i> (pp. 230–244). Klett Kallmeyer.","ieee":"C. Kulgemeyer, F. G. Sterzing, and M. Hörnlein, “Aus Erklärvideos lernen,” in <i>Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven</i>, T. Wilhelm, Ed. Hannover: Klett Kallmeyer, 2023, pp. 230–244.","short":"C. Kulgemeyer, F.G. Sterzing, M. Hörnlein, in: T. Wilhelm (Ed.), Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven, Klett Kallmeyer, Hannover, 2023, pp. 230–244.","chicago":"Kulgemeyer, Christoph, Fabian Gabriel Sterzing, and Madeleine Hörnlein. “Aus Erklärvideos lernen.” In <i>Digital Physik unterrichten. Grundlagen, Impulse, Perspektiven</i>, edited by Thomas Wilhelm, 230–44. Hannover: Klett Kallmeyer, 2023."},"place":"Hannover","date_created":"2023-05-25T12:39:23Z","type":"book_chapter","department":[{"_id":"299"}]},{"date_updated":"2025-01-02T11:55:59Z","publication_status":"published","intvolume":"        16","year":"2023","title":"Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis","author":[{"first_name":"Reza","orcid":"https://orcid.org/0009-0001-3161-8036","last_name":"Afsahnoudeh","full_name":"Afsahnoudeh, Reza","id":"90390"},{"id":"49825","last_name":"Wortmeier","first_name":"Andreas","full_name":"Wortmeier, Andreas"},{"last_name":"Holzmüller","first_name":"Maik","full_name":"Holzmüller, Maik","id":"82645"},{"id":"98514","last_name":"Gong","first_name":"Yi","full_name":"Gong, Yi"},{"id":"233","last_name":"Homberg","first_name":"Werner","full_name":"Homberg, Werner"},{"id":"665","full_name":"Kenig, Eugeny","first_name":"Eugeny","last_name":"Kenig"}],"publication_identifier":{"issn":["1996-1073"]},"doi":"10.3390/en16217284","article_number":"7284","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"<jats:p>Pillow-plate heat exchangers (PPHEs) represent a suitable alternative to conventional shell-and-tube and plate heat exchangers. The inherent waviness of their channels promotes fluid mixing in the boundary layers and facilitates heat transfer. The overall thermo-hydraulic performance of PPHEs can further be enhanced by applying secondary surface structuring, thus increasing their competitiveness against conventional heat exchangers. In this work, various secondary structures applied on the PPHE surface were studied numerically to explore their potential to enhance near-wall mixing. Computational fluid dynamics (CFD) simulations of single-phase turbulent flow in the outer PPHE channel were performed and pressure drop, heat transfer coefficients, and overall thermo-hydraulic efficiency were determined. The simulation results clearly demonstrate a positive impact of secondary structuring on heat transfer in PPHEs.</jats:p>"}],"publication":"Energies","issue":"21","type":"journal_article","department":[{"_id":"831"},{"_id":"9"}],"date_created":"2024-10-15T12:10:31Z","status":"public","user_id":"90390","volume":16,"publisher":"MDPI AG","_id":"56627","citation":{"bibtex":"@article{Afsahnoudeh_Wortmeier_Holzmüller_Gong_Homberg_Kenig_2023, title={Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis}, volume={16}, DOI={<a href=\"https://doi.org/10.3390/en16217284\">10.3390/en16217284</a>}, number={217284}, journal={Energies}, publisher={MDPI AG}, author={Afsahnoudeh, Reza and Wortmeier, Andreas and Holzmüller, Maik and Gong, Yi and Homberg, Werner and Kenig, Eugeny}, year={2023} }","ama":"Afsahnoudeh R, Wortmeier A, Holzmüller M, Gong Y, Homberg W, Kenig E. Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis. <i>Energies</i>. 2023;16(21). doi:<a href=\"https://doi.org/10.3390/en16217284\">10.3390/en16217284</a>","short":"R. Afsahnoudeh, A. Wortmeier, M. Holzmüller, Y. Gong, W. Homberg, E. Kenig, Energies 16 (2023).","chicago":"Afsahnoudeh, Reza, Andreas Wortmeier, Maik Holzmüller, Yi Gong, Werner Homberg, and Eugeny Kenig. “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis.” <i>Energies</i> 16, no. 21 (2023). <a href=\"https://doi.org/10.3390/en16217284\">https://doi.org/10.3390/en16217284</a>.","ieee":"R. Afsahnoudeh, A. Wortmeier, M. Holzmüller, Y. Gong, W. Homberg, and E. Kenig, “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis,” <i>Energies</i>, vol. 16, no. 21, Art. no. 7284, 2023, doi: <a href=\"https://doi.org/10.3390/en16217284\">10.3390/en16217284</a>.","mla":"Afsahnoudeh, Reza, et al. “Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis.” <i>Energies</i>, vol. 16, no. 21, 7284, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/en16217284\">10.3390/en16217284</a>.","apa":"Afsahnoudeh, R., Wortmeier, A., Holzmüller, M., Gong, Y., Homberg, W., &#38; Kenig, E. (2023). Thermo-Hydraulic Performance of Pillow-Plate Heat Exchangers with Secondary Structuring: A Numerical Analysis. <i>Energies</i>, <i>16</i>(21), Article 7284. <a href=\"https://doi.org/10.3390/en16217284\">https://doi.org/10.3390/en16217284</a>"}},{"type":"book_chapter","place":"Dornstadt","date_created":"2025-01-02T14:02:46Z","extern":"1","citation":{"mla":"Drumm, Sandra, and Brenda Vieth. “Selbstgesteuertes Online-Lernen von Lehramtsstudierenden in Deutsch als Zweitsprache.” <i>Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre</i>, edited by Nerea Vöing et al., Visual Ink Publishing UG, 2023, pp. 103–20.","apa":"Drumm, S., &#38; Vieth, B. (2023). Selbstgesteuertes Online-Lernen von Lehramtsstudierenden in Deutsch als Zweitsprache. In N. Vöing, R. Schmidt, &#38; I. Neiske (Eds.), <i>Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre</i> (pp. 103–120). Visual Ink Publishing UG.","ieee":"S. Drumm and B. Vieth, “Selbstgesteuertes Online-Lernen von Lehramtsstudierenden in Deutsch als Zweitsprache,” in <i>Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre</i>, N. Vöing, R. Schmidt, and I. Neiske, Eds. Dornstadt: Visual Ink Publishing UG, 2023, pp. 103–120.","short":"S. Drumm, B. Vieth, in: N. Vöing, R. Schmidt, I. Neiske (Eds.), Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre, Visual Ink Publishing UG, Dornstadt, 2023, pp. 103–120.","ama":"Drumm S, Vieth B. Selbstgesteuertes Online-Lernen von Lehramtsstudierenden in Deutsch als Zweitsprache. In: Vöing N, Schmidt R, Neiske I, eds. <i>Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre</i>. Visual Ink Publishing UG; 2023:103-120.","chicago":"Drumm, Sandra, and Brenda Vieth. “Selbstgesteuertes Online-Lernen von Lehramtsstudierenden in Deutsch als Zweitsprache.” In <i>Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre</i>, edited by Nerea Vöing, Rebecca Schmidt, and Iris Neiske, 103–20. Dornstadt: Visual Ink Publishing UG, 2023.","bibtex":"@inbook{Drumm_Vieth_2023, place={Dornstadt}, title={Selbstgesteuertes Online-Lernen von Lehramtsstudierenden in Deutsch als Zweitsprache}, booktitle={Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre}, publisher={Visual Ink Publishing UG}, author={Drumm, Sandra and Vieth, Brenda}, editor={Vöing, Nerea and Schmidt, Rebecca and Neiske, Iris}, year={2023}, pages={103–120} }"},"publication":"Aktive Teilhabe fördern ICM und Student Engagement in der Hochschullehre","editor":[{"last_name":"Vöing","first_name":"Nerea","full_name":"Vöing, Nerea"},{"full_name":"Schmidt, Rebecca","first_name":"Rebecca","last_name":"Schmidt"},{"first_name":"Iris","last_name":"Neiske","full_name":"Neiske, Iris"}],"user_id":"44920","language":[{"iso":"ger"}],"_id":"57900","publisher":"Visual Ink Publishing UG","page":"103-120","date_updated":"2025-01-02T14:13:51Z","publication_status":"published","publication_identifier":{"unknown":["978-3-96784-020-9"]},"author":[{"last_name":"Drumm","first_name":"Sandra","full_name":"Drumm, Sandra"},{"full_name":"Vieth, Brenda","first_name":"Brenda","last_name":"Vieth","id":"44920"}],"title":"Selbstgesteuertes Online-Lernen von Lehramtsstudierenden in Deutsch als Zweitsprache","year":"2023","status":"public"},{"_id":"54632","publisher":"wbv Publikation","language":[{"iso":"ger"}],"main_file_link":[{"open_access":"1","url":"https://www.wbv.de/shop/Entwicklung-eines-neuen-Konzeptes-zur-Vermittlung-von-Lerntechniken-und-Selbstlernkompetenzen-fuer-Studierende-des-Maschinenbaus-an-der-Universitaet-Paderborn-HSL2310W"}],"user_id":"65001","doi":"10.3278/HSL2310W","author":[{"full_name":"Bentrup, Leon Alexander","first_name":"Leon Alexander","last_name":"Bentrup","id":"65001"},{"first_name":"Melanie ","last_name":"Gräßer","full_name":"Gräßer, Melanie "},{"id":"30086","full_name":"Temmen, Katrin","last_name":"Temmen","first_name":"Katrin"},{"last_name":"Schmid","first_name":"Hans-Joachim","orcid":"000-0001-8590-1921","full_name":"Schmid, Hans-Joachim","id":"464"}],"title":"Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn","status":"public","year":"2023","publication_status":"published","date_updated":"2025-01-13T09:06:55Z","date_created":"2024-06-06T09:52:30Z","department":[{"_id":"300"},{"_id":"34"},{"_id":"150"},{"_id":"9"}],"oa":"1","type":"journal_article","citation":{"ama":"Bentrup LA, Gräßer M, Temmen K, Schmid H-J. Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn. <i>die hochschullehre</i>. 2023;(9). doi:<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>","bibtex":"@article{Bentrup_Gräßer_Temmen_Schmid_2023, title={Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn}, DOI={<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>}, number={9}, journal={die hochschullehre}, publisher={wbv Publikation}, author={Bentrup, Leon Alexander and Gräßer, Melanie  and Temmen, Katrin and Schmid, Hans-Joachim}, year={2023} }","mla":"Bentrup, Leon Alexander, et al. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” <i>die hochschullehre</i>, no. 9, wbv Publikation, 2023, doi:<a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>.","chicago":"Bentrup, Leon Alexander, Melanie  Gräßer, Katrin Temmen, and Hans-Joachim Schmid. “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn.” <i>die hochschullehre</i>, no. 9 (2023). <a href=\"https://doi.org/10.3278/HSL2310W\">https://doi.org/10.3278/HSL2310W</a>.","short":"L.A. Bentrup, M. Gräßer, K. Temmen, H.-J. Schmid, die hochschullehre (2023).","apa":"Bentrup, L. A., Gräßer, M., Temmen, K., &#38; Schmid, H.-J. (2023). Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn. <i>die hochschullehre</i>, <i>9</i>. <a href=\"https://doi.org/10.3278/HSL2310W\">https://doi.org/10.3278/HSL2310W</a>","ieee":"L. A. Bentrup, M. Gräßer, K. Temmen, and H.-J. Schmid, “Entwicklung eines neuen Konzeptes zur Vermittlung von Lerntechniken und Selbstlernkompetenzen für Studierende des Maschinenbaus an der Universität Paderborn,” <i>die hochschullehre</i>, no. 9, 2023, doi: <a href=\"https://doi.org/10.3278/HSL2310W\">10.3278/HSL2310W</a>."},"issue":"9","publication":"die hochschullehre"},{"year":"2023","title":"Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems","status":"public","author":[{"id":"47565","first_name":"Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X","full_name":"Gräßler, Iris"},{"last_name":"Roesmann","first_name":"Daniel","full_name":"Roesmann, Daniel","id":"54680"},{"full_name":"Unverzagt, Marc","first_name":"Marc","last_name":"Unverzagt","id":"55785"},{"last_name":"Pottebaum","orcid":"http://orcid.org/0000-0001-8778-2989","first_name":"Jens","full_name":"Pottebaum, Jens","id":"405"}],"conference":{"name":"Sensor and Measurement Science International (SMSI 2023)","start_date":"8.5.2023","location":"Nürnberg","end_date":"11.5.2023"},"publication_status":"published","date_updated":"2025-01-14T06:45:39Z","language":[{"iso":"eng"}],"_id":"46802","publisher":"AMA Service","user_id":"405","doi":"10.5162/smsi2023/p70","publication":"Sensor and Measurement Science International (SMSI 2023)","citation":{"mla":"Gräßler, Iris, et al. “Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems.” <i>Sensor and Measurement Science International (SMSI 2023)</i>, AMA Service, 2023, doi:<a href=\"https://doi.org/10.5162/smsi2023/p70\">10.5162/smsi2023/p70</a>.","ama":"Gräßler I, Roesmann D, Unverzagt M, Pottebaum J. Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems. In: <i>Sensor and Measurement Science International (SMSI 2023)</i>. AMA Service; 2023. doi:<a href=\"https://doi.org/10.5162/smsi2023/p70\">10.5162/smsi2023/p70</a>","bibtex":"@inproceedings{Gräßler_Roesmann_Unverzagt_Pottebaum_2023, place={Wunstorf}, title={Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems}, DOI={<a href=\"https://doi.org/10.5162/smsi2023/p70\">10.5162/smsi2023/p70</a>}, booktitle={Sensor and Measurement Science International (SMSI 2023)}, publisher={AMA Service}, author={Gräßler, Iris and Roesmann, Daniel and Unverzagt, Marc and Pottebaum, Jens}, year={2023} }","apa":"Gräßler, I., Roesmann, D., Unverzagt, M., &#38; Pottebaum, J. (2023). Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems. <i>Sensor and Measurement Science International (SMSI 2023)</i>. Sensor and Measurement Science International (SMSI 2023), Nürnberg. <a href=\"https://doi.org/10.5162/smsi2023/p70\">https://doi.org/10.5162/smsi2023/p70</a>","ieee":"I. Gräßler, D. Roesmann, M. Unverzagt, and J. Pottebaum, “Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems,” presented at the Sensor and Measurement Science International (SMSI 2023), Nürnberg, 2023, doi: <a href=\"https://doi.org/10.5162/smsi2023/p70\">10.5162/smsi2023/p70</a>.","chicago":"Gräßler, Iris, Daniel Roesmann, Marc Unverzagt, and Jens Pottebaum. “Virtual Test Scenarios for Human-Centered Design with Virtual Measurement Systems.” In <i>Sensor and Measurement Science International (SMSI 2023)</i>. Wunstorf: AMA Service, 2023. <a href=\"https://doi.org/10.5162/smsi2023/p70\">https://doi.org/10.5162/smsi2023/p70</a>.","short":"I. Gräßler, D. Roesmann, M. Unverzagt, J. Pottebaum, in: Sensor and Measurement Science International (SMSI 2023), AMA Service, Wunstorf, 2023."},"quality_controlled":"1","date_created":"2023-09-05T08:42:17Z","place":"Wunstorf","type":"conference","department":[{"_id":"152"}]},{"date_updated":"2025-03-18T12:44:43Z","publication_status":"published","title":"Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718","year":"2023","author":[{"full_name":"Bödger, Christian","first_name":"Christian","last_name":"Bödger","id":"93904"},{"id":"25730","full_name":"Gnaase, Stefan","last_name":"Gnaase","first_name":"Stefan"},{"last_name":"Lehnert","first_name":"Dennis","full_name":"Lehnert, Dennis","id":"90491"},{"id":"553","full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"}],"main_file_link":[{"url":"https://utw10945.utweb.utexas.edu/sites/default/files/2023/091%20InvestigationoftheInfluenceofProcessParametersonProductivityintheLPBFProcessfortheMat.pdf","open_access":"1"}],"language":[{"iso":"eng"}],"abstract":[{"text":"The nickel-based alloy Inconel 718, which is used in aerospace technology, poses a great\r\nchallenge to conventional machining due to its high strain hardening and toughness. Here, the laser\r\npowder bed fusion process (LPBF) offers an alternative with potential savings if sufficiently high\r\nproductivity can be achieved. Based on the parameter study carried out, starting from the SLM\r\nSolutions standard parameters for the manufacturing of components, exposure parameters could be\r\ndeveloped to realize manufacturing with 120 μm and 150 μm layer thickness, with almost the same\r\ngeometric accuracy. For this purpose, the process parameters of laser power, focus diameter, hatch\r\ndistance and scan speed were varied. The negative defocusing of the laser showed a positive effect\r\non the density of the parts, realizing densities ≥ 99.94 %, with high dimensional stability and good\r\nmechanical properties. Considering the reduced manufacturing time of up to 61 %, a significant\r\nincrease in productivity was achieved.","lang":"eng"}],"publication":"Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference","type":"conference","department":[{"_id":"149"},{"_id":"219"},{"_id":"321"},{"_id":"9"}],"file":[{"content_type":"application/pdf","success":1,"file_id":"50743","date_updated":"2024-01-23T08:25:26Z","relation":"main_file","file_size":999107,"access_level":"closed","file_name":"Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel718 - Bödger.pdf","date_created":"2024-01-23T08:25:26Z","creator":"cboedger"}],"date_created":"2024-01-23T08:32:28Z","has_accepted_license":"1","status":"public","conference":{"start_date":"2023-08-14","name":"Solid Freeform Fabrication","location":"Austin","end_date":"2023-08-16"},"ddc":["670"],"user_id":"90491","_id":"50742","file_date_updated":"2024-01-23T08:25:26Z","citation":{"bibtex":"@inproceedings{Bödger_Gnaase_Lehnert_Tröster_2023, title={Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718}, booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference}, author={Bödger, Christian and Gnaase, Stefan and Lehnert, Dennis and Tröster, Thomas}, year={2023} }","ama":"Bödger C, Gnaase S, Lehnert D, Tröster T. Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. In: <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>. ; 2023.","mla":"Bödger, Christian, et al. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>, 2023.","short":"C. Bödger, S. Gnaase, D. Lehnert, T. Tröster, in: Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, 2023.","chicago":"Bödger, Christian, Stefan Gnaase, Dennis Lehnert, and Thomas Tröster. “Investigation of the Influence of Process Parameters on Productivity in the LPBF Process for the Material Inconel 718.” In <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>, 2023.","ieee":"C. Bödger, S. Gnaase, D. Lehnert, and T. Tröster, “Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718,” presented at the Solid Freeform Fabrication, Austin, 2023.","apa":"Bödger, C., Gnaase, S., Lehnert, D., &#38; Tröster, T. (2023). Investigation of the influence of process parameters on productivity in the LPBF process for the material Inconel 718. <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference</i>. Solid Freeform Fabrication, Austin."},"oa":"1"},{"quality_controlled":"1","citation":{"chicago":"Gnaase, Stefan, Dennis Niggemeyer, Dennis Lehnert, Christian Bödger, and Thomas Tröster. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” <i>Crystals</i> 13, no. 2 (2023). <a href=\"https://doi.org/10.3390/cryst13020157\">https://doi.org/10.3390/cryst13020157</a>.","short":"S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, T. Tröster, Crystals 13 (2023).","ieee":"S. Gnaase, D. Niggemeyer, D. Lehnert, C. Bödger, and T. Tröster, “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709,” <i>Crystals</i>, vol. 13, no. 2, Art. no. 157, 2023, doi: <a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>.","apa":"Gnaase, S., Niggemeyer, D., Lehnert, D., Bödger, C., &#38; Tröster, T. (2023). Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. <i>Crystals</i>, <i>13</i>(2), Article 157. <a href=\"https://doi.org/10.3390/cryst13020157\">https://doi.org/10.3390/cryst13020157</a>","bibtex":"@article{Gnaase_Niggemeyer_Lehnert_Bödger_Tröster_2023, title={Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709}, volume={13}, DOI={<a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>}, number={2157}, journal={Crystals}, publisher={MDPI AG}, author={Gnaase, Stefan and Niggemeyer, Dennis and Lehnert, Dennis and Bödger, Christian and Tröster, Thomas}, year={2023} }","ama":"Gnaase S, Niggemeyer D, Lehnert D, Bödger C, Tröster T. Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709. <i>Crystals</i>. 2023;13(2). doi:<a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>","mla":"Gnaase, Stefan, et al. “Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &#38;amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709.” <i>Crystals</i>, vol. 13, no. 2, 157, MDPI AG, 2023, doi:<a href=\"https://doi.org/10.3390/cryst13020157\">10.3390/cryst13020157</a>."},"file_date_updated":"2024-11-22T15:55:07Z","status":"public","volume":13,"user_id":"90491","ddc":["670"],"publisher":"MDPI AG","_id":"37200","abstract":[{"text":"<jats:p>(1) This work answers the question of whether and to what extent there is a significant difference in mechanical properties when different additive manufacturing processes are applied to the material 1.2709. The Laser-Powder-Bed-Fusion (L-PBF) and Laser-Metal-Deposition (LMD) processes are considered, as they differ fundamentally in the way a part is manufactured. (2) Known process parameters for low-porosity parts were used to fabricate tensile strength specimens. Half of the specimens were heat-treated, and all specimens were tested for mechanical properties in a quasi-static tensile test. In addition, the material hardness was determined. (3) It was found that, firstly, heat treatment resulted in a sharp increase in mechanical properties such as hardness, elastic modulus, yield strength and ultimate strength. In addition to the increase in these properties, the elongation at break also decreases significantly after heat treatment. The choice of process, on the other hand, does not give either process a clear advantage in terms of mechanical properties but shows that it is necessary to consider the essential mechanical properties for a desired application.</jats:p>","lang":"eng"}],"publication":"Crystals","issue":"2","department":[{"_id":"149"},{"_id":"9"},{"_id":"321"}],"keyword":["Inorganic Chemistry","Condensed Matter Physics","General Materials Science","General Chemical Engineering"],"type":"journal_article","date_created":"2023-01-18T05:44:59Z","file":[{"success":1,"content_type":"application/pdf","file_id":"57334","file_size":5838834,"access_level":"closed","file_name":"crystals-13-00157.pdf","date_updated":"2024-11-22T15:55:07Z","relation":"main_file","date_created":"2024-11-22T15:55:07Z","creator":"cboedger"}],"article_type":"original","intvolume":"        13","publication_status":"published","date_updated":"2025-03-18T12:45:57Z","publication_identifier":{"issn":["2073-4352"]},"author":[{"last_name":"Gnaase","first_name":"Stefan","full_name":"Gnaase, Stefan","id":"25730"},{"id":"77214","last_name":"Niggemeyer","first_name":"Dennis","full_name":"Niggemeyer, Dennis"},{"id":"90491","full_name":"Lehnert, Dennis","last_name":"Lehnert","first_name":"Dennis"},{"full_name":"Bödger, Christian","first_name":"Christian","last_name":"Bödger","id":"93904"},{"full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas","id":"553"}],"year":"2023","title":"Comparative Study of the Influence of Heat Treatment and Additive Manufacturing Process (LMD &amp; L-PBF) on the Mechanical Properties of Specimens Manufactured from 1.2709","doi":"10.3390/cryst13020157","language":[{"iso":"eng"}],"article_number":"157"}]