[{"date_updated":"2023-03-07T09:26:48Z","publication_identifier":{"isbn":["9783843947855"]},"author":[{"last_name":"Olenberg","first_name":"Alexander","full_name":"Olenberg, Alexander"}],"status":"public","title":"Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen ","year":"2021","user_id":"15324","_id":"42812","language":[{"iso":"ger"}],"citation":{"ama":"Olenberg A. <i>Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen </i>.; 2021.","bibtex":"@book{Olenberg_2021, title={Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen }, author={Olenberg, Alexander}, year={2021} }","mla":"Olenberg, Alexander. <i>Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen </i>. 2021.","short":"A. Olenberg, Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen , 2021.","chicago":"Olenberg, Alexander. <i>Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen </i>, 2021.","apa":"Olenberg, A. (2021). <i>Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen </i>.","ieee":"A. Olenberg, <i>Untersuchung und Optimierung von strukturierten Packungen mittels CFD-Simulationen </i>. 2021."},"department":[{"_id":"145"}],"type":"dissertation","date_created":"2023-03-07T09:26:42Z"},{"citation":{"mla":"Fuchs Christian, and Dyer-Witheford Nick. “卡尔·马克思与互联网研究.” <i>国际社会科学杂志 (Journal of International Social Sciences) 2021 (9)</i>, 2021, pp. 66–76.","ama":"Fuchs C, Dyer-Witheford N. 卡尔·马克思与互联网研究. <i>国际社会科学杂志 (Journal of International Social Sciences) 2021 (9)</i>. Published online 2021:66-76.","bibtex":"@article{Fuchs_Dyer-Witheford_2021, title={卡尔·马克思与互联网研究}, journal={国际社会科学杂志 (Journal of International Social Sciences) 2021 (9)}, author={Fuchs Christian and Dyer-Witheford Nick}, year={2021}, pages={66–76} }","apa":"Fuchs C., &#38; Dyer-Witheford N. (2021). 卡尔·马克思与互联网研究. <i>国际社会科学杂志 (Journal of International Social Sciences) 2021 (9)</i>, 66–76.","ieee":"Fuchs C. and Dyer-Witheford N., “卡尔·马克思与互联网研究,” <i>国际社会科学杂志 (Journal of International Social Sciences) 2021 (9)</i>, pp. 66–76, 2021.","short":"Fuchs C., Dyer-Witheford N., 国际社会科学杂志 (Journal of International Social Sciences) 2021 (9) (2021) 66–76.","chicago":"Fuchs Christian, and Dyer-Witheford Nick. “卡尔·马克思与互联网研究.” <i>国际社会科学杂志 (Journal of International Social Sciences) 2021 (9)</i>, 2021, 66–76."},"publication":"国际社会科学杂志 (Journal of International Social Sciences) 2021 (9)","extern":"1","date_created":"2023-02-03T02:41:42Z","department":[{"_id":"136"}],"type":"journal_article","author":[{"id":"21863","full_name":"Fuchs, Christian","first_name":"Christian","orcid":"0000-0003-0589-4579","last_name":"Fuchs"},{"full_name":"Dyer-Witheford, Nick","first_name":"Nick","last_name":"Dyer-Witheford"}],"title":"卡尔·马克思与互联网研究","status":"public","year":"2021","date_updated":"2023-03-08T03:00:20Z","language":[{"iso":"chi"}],"_id":"41599","page":"66-76","user_id":"49063"},{"department":[{"_id":"9"},{"_id":"35"},{"_id":"2"},{"_id":"307"}],"type":"journal_article","date_created":"2021-10-08T10:07:18Z","quality_controlled":"1","abstract":[{"lang":"eng","text":"In this report, a flame spray pyrolysis setup has been examined with various in situ extraction methods of particle samples along the flame axis. First, two precursor formulations leading to the formation of iron oxide nanoparticles were used in a standardized SpraySyn burner system, and the final particle outcome was characterized by a broad range of established powder characterization techniques (TEM/HRTEM, SAXS, XRD, BET). The characterization of the powder products evidenced that mostly homogeneous gas-to-particle conversion takes place when applying an acidic precursor solution, whereas the absence of the acid leads to a dominant droplet-to-particle pathway. Our study indicates that a droplet-to-particle-pathway could be present even when processing the acidic formulation. However, even if a secondary pathway might take place in this case as well, it is not dominant and nearly negligible. Subsequently, the in situ particle structure evolution was investigated for the dominant gas-to-particle pathway, and particles were extracted along the flame axis for online SMPS and offline TEM/HRTEM analysis. Due to the highly reactive conditions within the flame (high temperatures, turbulent flow field, high particle number concentrations), the extraction of representative samples from spray flames is challenging. In order to handle the reactive conditions, two extraction techniques were tailored in this report. To extract an aerosol sample within the flame for SMPS measurement, a Hole in a Tube probe was adjusted. Thus, the mobility particle diameter as well as the corresponding distribution widths were obtained at different heights above the burner along the flame axis. For TEM/HRTEM image analysis, particle samples were collected thermophoretically by means of a tailored shutter system. Since all sampling grids were protected until reaching the flame axis and due to the low sampling time, momentary captures of local particle structures could be extracted precisely. The particle morphologies have clearly shown an evolution from spherical and paired particles in the flame center to fractal and compact agglomerates at later synthesis stages."}],"citation":{"apa":"Tischendorf, R., Simmler, M., Weinberger, C., Bieber, M., Reddemann, M., Fröde, F., Lindner, J., Pitsch, H., Kneer, R., Tiemann, M., Nirschl, H., &#38; Schmid, H.-J. (2021). Examination of the evolution of iron oxide nanoparticles in flame spray pyrolysis by tailored in situ particle sampling techniques. <i>Journal of Aerosol Science</i>, Article 105722. <a href=\"https://doi.org/10.1016/j.jaerosci.2020.105722\">https://doi.org/10.1016/j.jaerosci.2020.105722</a>","ieee":"R. Tischendorf <i>et al.</i>, “Examination of the evolution of iron oxide nanoparticles in flame spray pyrolysis by tailored in situ particle sampling techniques,” <i>Journal of Aerosol Science</i>, Art. no. 105722, 2021, doi: <a href=\"https://doi.org/10.1016/j.jaerosci.2020.105722\">10.1016/j.jaerosci.2020.105722</a>.","short":"R. Tischendorf, M. Simmler, C. Weinberger, M. Bieber, M. Reddemann, F. Fröde, J. Lindner, H. Pitsch, R. Kneer, M. Tiemann, H. Nirschl, H.-J. Schmid, Journal of Aerosol Science (2021).","chicago":"Tischendorf, R., M. Simmler, Christian Weinberger, M. Bieber, M. Reddemann, F. Fröde, J. Lindner, et al. “Examination of the Evolution of Iron Oxide Nanoparticles in Flame Spray Pyrolysis by Tailored in Situ Particle Sampling Techniques.” <i>Journal of Aerosol Science</i>, 2021. <a href=\"https://doi.org/10.1016/j.jaerosci.2020.105722\">https://doi.org/10.1016/j.jaerosci.2020.105722</a>.","mla":"Tischendorf, R., et al. “Examination of the Evolution of Iron Oxide Nanoparticles in Flame Spray Pyrolysis by Tailored in Situ Particle Sampling Techniques.” <i>Journal of Aerosol Science</i>, 105722, 2021, doi:<a href=\"https://doi.org/10.1016/j.jaerosci.2020.105722\">10.1016/j.jaerosci.2020.105722</a>.","ama":"Tischendorf R, Simmler M, Weinberger C, et al. Examination of the evolution of iron oxide nanoparticles in flame spray pyrolysis by tailored in situ particle sampling techniques. <i>Journal of Aerosol Science</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.jaerosci.2020.105722\">10.1016/j.jaerosci.2020.105722</a>","bibtex":"@article{Tischendorf_Simmler_Weinberger_Bieber_Reddemann_Fröde_Lindner_Pitsch_Kneer_Tiemann_et al._2021, title={Examination of the evolution of iron oxide nanoparticles in flame spray pyrolysis by tailored in situ particle sampling techniques}, DOI={<a href=\"https://doi.org/10.1016/j.jaerosci.2020.105722\">10.1016/j.jaerosci.2020.105722</a>}, number={105722}, journal={Journal of Aerosol Science}, author={Tischendorf, R. and Simmler, M. and Weinberger, Christian and Bieber, M. and Reddemann, M. and Fröde, F. and Lindner, J. and Pitsch, H. and Kneer, R. and Tiemann, Michael and et al.}, year={2021} }"},"publication":"Journal of Aerosol Science","user_id":"23547","doi":"10.1016/j.jaerosci.2020.105722","_id":"25896","language":[{"iso":"eng"}],"article_number":"105722","article_type":"original","publication_status":"published","date_updated":"2023-03-08T08:07:30Z","author":[{"first_name":"R.","last_name":"Tischendorf","full_name":"Tischendorf, R."},{"last_name":"Simmler","first_name":"M.","full_name":"Simmler, M."},{"first_name":"Christian","last_name":"Weinberger","full_name":"Weinberger, Christian","id":"11848"},{"first_name":"M.","last_name":"Bieber","full_name":"Bieber, M."},{"first_name":"M.","last_name":"Reddemann","full_name":"Reddemann, M."},{"full_name":"Fröde, F.","last_name":"Fröde","first_name":"F."},{"full_name":"Lindner, J.","last_name":"Lindner","first_name":"J."},{"full_name":"Pitsch, H.","first_name":"H.","last_name":"Pitsch"},{"first_name":"R.","last_name":"Kneer","full_name":"Kneer, R."},{"id":"23547","full_name":"Tiemann, Michael","first_name":"Michael","last_name":"Tiemann","orcid":"0000-0003-1711-2722"},{"full_name":"Nirschl, H.","last_name":"Nirschl","first_name":"H."},{"full_name":"Schmid, H.-J.","last_name":"Schmid","first_name":"H.-J."}],"publication_identifier":{"issn":["0021-8502"]},"title":"Examination of the evolution of iron oxide nanoparticles in flame spray pyrolysis by tailored in situ particle sampling techniques","status":"public","year":"2021"},{"language":[{"iso":"eng"}],"_id":"24475","user_id":"45530","ddc":["660"],"author":[{"id":"45530","full_name":"Neukötter, Moritz","orcid":"0000-0001-9101-8828","last_name":"Neukötter","first_name":"Moritz"},{"id":"3959","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","first_name":"Steffen","full_name":"Jesinghausen, Steffen"},{"full_name":"Schmid, Hans-Joachim","orcid":"000-0001-8590-1921","last_name":"Schmid","first_name":"Hans-Joachim","id":"464"}],"conference":{"end_date":"2021-03-10","location":"Online","name":"Jahrestreffen der ProcessNet-Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen","start_date":"2021-03-09"},"title":"Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster)","status":"public","year":"2021","has_accepted_license":"1","date_updated":"2023-03-14T08:29:59Z","date_created":"2021-09-15T07:21:45Z","file":[{"content_type":"application/pdf","success":1,"file_id":"42979","file_size":471828,"access_level":"closed","file_name":"P_Neukötter_Moritz_FilamentExtensionAtomization.pdf","date_updated":"2023-03-14T08:20:51Z","relation":"main_file","date_created":"2023-03-14T08:20:51Z","creator":"moritzne"}],"department":[{"_id":"150"},{"_id":"9"}],"type":"conference_abstract","citation":{"mla":"Neukötter, Moritz, et al. <i>Theoretische Beschreibung Des Tropfenbildungsprozesses Bei Der Filament Extension Atomization: Entwicklung Eines Vorhersagemodells Für Die Tropfengröße (Poster)</i>. 2021.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2021, title={Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster)}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2021} }","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster). In: ; 2021.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster),” presented at the Jahrestreffen der ProcessNet-Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen, Online, 2021.","apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2021). <i>Theoretische Beschreibung des Tropfenbildungsprozesses bei der Filament Extension Atomization: Entwicklung eines Vorhersagemodells für die Tropfengröße (Poster)</i>. Jahrestreffen der ProcessNet-Fachgruppen Computational Fluid Dynamics und Mehrphasenströmungen, Online.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Theoretische Beschreibung Des Tropfenbildungsprozesses Bei Der Filament Extension Atomization: Entwicklung Eines Vorhersagemodells Für Die Tropfengröße (Poster),” 2021."},"file_date_updated":"2023-03-14T08:20:51Z"},{"file_date_updated":"2023-03-14T08:19:08Z","citation":{"apa":"Neukötter, M., Jesinghausen, S., &#38; Schmid, H.-J. (2021). <i>Filament Extension Atomization – A novel Process for Powder Production? (Presentation)</i>. Annual European Rheology Conference, Online.","ieee":"M. Neukötter, S. Jesinghausen, and H.-J. Schmid, “Filament Extension Atomization – A novel Process for Powder Production? (Presentation),” presented at the Annual European Rheology Conference, Online, 2021.","short":"M. Neukötter, S. Jesinghausen, H.-J. Schmid, in: 2021.","chicago":"Neukötter, Moritz, Steffen Jesinghausen, and Hans-Joachim Schmid. “Filament Extension Atomization – A Novel Process for Powder Production? (Presentation),” 2021.","mla":"Neukötter, Moritz, et al. <i>Filament Extension Atomization – A Novel Process for Powder Production? (Presentation)</i>. 2021.","ama":"Neukötter M, Jesinghausen S, Schmid H-J. Filament Extension Atomization – A novel Process for Powder Production? (Presentation). In: ; 2021.","bibtex":"@inproceedings{Neukötter_Jesinghausen_Schmid_2021, title={Filament Extension Atomization – A novel Process for Powder Production? (Presentation)}, author={Neukötter, Moritz and Jesinghausen, Steffen and Schmid, Hans-Joachim}, year={2021} }"},"type":"conference_abstract","department":[{"_id":"150"},{"_id":"9"}],"file":[{"file_name":"Abstract_AERC_Neukötter.pdf","access_level":"closed","file_size":53362,"relation":"main_file","date_updated":"2023-03-14T08:19:08Z","file_id":"42978","content_type":"application/pdf","success":1,"creator":"moritzne","date_created":"2023-03-14T08:19:08Z"}],"date_created":"2022-03-10T08:31:58Z","date_updated":"2023-03-14T08:30:18Z","has_accepted_license":"1","year":"2021","title":"Filament Extension Atomization – A novel Process for Powder Production? (Presentation)","status":"public","conference":{"end_date":"2021-04-14","start_date":"2021-04-13","name":"Annual European Rheology Conference","location":"Online"},"author":[{"id":"45530","full_name":"Neukötter, Moritz","last_name":"Neukötter","orcid":"0000-0001-9101-8828","first_name":"Moritz"},{"id":"3959","first_name":"Steffen","orcid":"https://orcid.org/0000-0003-2611-5298","last_name":"Jesinghausen","full_name":"Jesinghausen, Steffen"},{"full_name":"Schmid, Hans-Joachim","first_name":"Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921","id":"464"}],"ddc":["660"],"user_id":"45530","_id":"30221","language":[{"iso":"eng"}]},{"type":"conference","department":[{"_id":"321"},{"_id":"9"},{"_id":"367"},{"_id":"147"}],"date_created":"2021-10-18T08:04:43Z","quality_controlled":"1","publication":"PPS-36 Proceedings","citation":{"bibtex":"@inproceedings{Moritzer_Flachmann_2021, title={Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC)}, booktitle={PPS-36 Proceedings}, author={Moritzer, Elmar and Flachmann, Felix}, year={2021} }","ama":"Moritzer E, Flachmann F. Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC). In: <i>PPS-36 Proceedings</i>. ; 2021.","mla":"Moritzer, Elmar, and Felix Flachmann. “Process-Reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC).” <i>PPS-36 Proceedings</i>, 2021.","short":"E. Moritzer, F. Flachmann, in: PPS-36 Proceedings, 2021.","chicago":"Moritzer, Elmar, and Felix Flachmann. “Process-Reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC).” In <i>PPS-36 Proceedings</i>, 2021.","ieee":"E. Moritzer and F. Flachmann, “Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC),” presented at the 36th International Conference of the Polymer Processing Society , Montreal, 2021.","apa":"Moritzer, E., &#38; Flachmann, F. (2021). Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC). <i>PPS-36 Proceedings</i>. 36th International Conference of the Polymer Processing Society , Montreal."},"user_id":"38212","_id":"26390","language":[{"iso":"eng"}],"date_updated":"2023-04-26T13:39:56Z","status":"public","year":"2021","title":"Process-reliable Injection Molding of Highly Filled Wood-Plastic-Composites (WPC)","conference":{"end_date":"2021-09-29","location":"Montreal","start_date":"2021-09-26","name":"36th International Conference of the Polymer Processing Society "},"author":[{"full_name":"Moritzer, Elmar","first_name":"Elmar","last_name":"Moritzer","id":"20531"},{"id":"38212","first_name":"Felix","last_name":"Flachmann","orcid":"0000-0002-7651-7028","full_name":"Flachmann, Felix"}]},{"department":[{"_id":"9"},{"_id":"145"}],"type":"journal_article","date_created":"2021-05-28T10:42:59Z","quality_controlled":"1","citation":{"ama":"Grabo M, Acar E, Kenig E. Modeling and improvement of a packed bed latent heat storage filled with non-spherical encapsulated PCM-Elements. <i>Renewable Energy</i>. 2021;173:1087-1097. doi:<a href=\"https://doi.org/10.1016/j.renene.2021.04.022\">10.1016/j.renene.2021.04.022</a>","bibtex":"@article{Grabo_Acar_Kenig_2021, title={Modeling and improvement of a packed bed latent heat storage filled with non-spherical encapsulated PCM-Elements}, volume={173}, DOI={<a href=\"https://doi.org/10.1016/j.renene.2021.04.022\">10.1016/j.renene.2021.04.022</a>}, journal={Renewable Energy}, author={Grabo, Matti and Acar, Emre and Kenig, Eugeny}, year={2021}, pages={1087–1097} }","mla":"Grabo, Matti, et al. “Modeling and Improvement of a Packed Bed Latent Heat Storage Filled with Non-Spherical Encapsulated PCM-Elements.” <i>Renewable Energy</i>, vol. 173, 2021, pp. 1087–97, doi:<a href=\"https://doi.org/10.1016/j.renene.2021.04.022\">10.1016/j.renene.2021.04.022</a>.","chicago":"Grabo, Matti, Emre Acar, and Eugeny Kenig. “Modeling and Improvement of a Packed Bed Latent Heat Storage Filled with Non-Spherical Encapsulated PCM-Elements.” <i>Renewable Energy</i> 173 (2021): 1087–97. <a href=\"https://doi.org/10.1016/j.renene.2021.04.022\">https://doi.org/10.1016/j.renene.2021.04.022</a>.","short":"M. Grabo, E. Acar, E. Kenig, Renewable Energy 173 (2021) 1087–1097.","apa":"Grabo, M., Acar, E., &#38; Kenig, E. (2021). Modeling and improvement of a packed bed latent heat storage filled with non-spherical encapsulated PCM-Elements. <i>Renewable Energy</i>, <i>173</i>, 1087–1097. <a href=\"https://doi.org/10.1016/j.renene.2021.04.022\">https://doi.org/10.1016/j.renene.2021.04.022</a>","ieee":"M. Grabo, E. Acar, and E. Kenig, “Modeling and improvement of a packed bed latent heat storage filled with non-spherical encapsulated PCM-Elements,” <i>Renewable Energy</i>, vol. 173, pp. 1087–1097, 2021, doi: <a href=\"https://doi.org/10.1016/j.renene.2021.04.022\">10.1016/j.renene.2021.04.022</a>."},"publication":"Renewable Energy","volume":173,"doi":"10.1016/j.renene.2021.04.022","user_id":"66520","_id":"22265","language":[{"iso":"eng"}],"page":"1087-1097","intvolume":"       173","date_updated":"2023-04-27T08:00:55Z","publication_status":"published","publication_identifier":{"issn":["0960-1481"]},"author":[{"id":"66520","full_name":"Grabo, Matti","first_name":"Matti","last_name":"Grabo"},{"full_name":"Acar, Emre","first_name":"Emre","last_name":"Acar","id":"45529"},{"first_name":"Eugeny","last_name":"Kenig","full_name":"Kenig, Eugeny","id":"665"}],"status":"public","title":"Modeling and improvement of a packed bed latent heat storage filled with non-spherical encapsulated PCM-Elements","year":"2021"},{"status":"public","conference":{"location":"Columbus","name":"ICTP 2021"},"page":"2115-2125","_id":"21477","publisher":"Springer, Cham","user_id":"3469","editor":[{"first_name":"G.","last_name":"Daehn","full_name":"Daehn, G."},{"last_name":"Cao","first_name":"J.","full_name":"Cao, J."},{"first_name":"B.","last_name":"Kinsey","full_name":"Kinsey, B."},{"last_name":"Tekkaya","first_name":"A. E. ","full_name":"Tekkaya, A. E. "},{"last_name":"Vivek","first_name":"A.","full_name":"Vivek, A."},{"full_name":"Yoshida, Y","last_name":"Yoshida","first_name":"Y"}],"citation":{"mla":"Rostek, Tim, et al. “Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming.” <i>Proceedings of the 13th International Conference on the Technology of Plasticity</i>, edited by G. Daehn et al., Springer, Cham, 2021, pp. 2115–25, doi:<a href=\"https://doi.org/10.1007/978-3-030-75381-8_178\">10.1007/978-3-030-75381-8_178</a>.","bibtex":"@inproceedings{Rostek_Makeieva_Homberg_2021, place={Columbus}, series={Forming the Future. The Minerals, Metals &#38; Materials Series.}, title={Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-75381-8_178\">10.1007/978-3-030-75381-8_178</a>}, booktitle={Proceedings of the 13th International Conference on the Technology of Plasticity}, publisher={Springer, Cham}, author={Rostek, Tim and Makeieva, Hanna and Homberg, Werner}, editor={Daehn, G. and Cao, J. and Kinsey, B. and Tekkaya, A. E.  and Vivek, A. and Yoshida, Y}, year={2021}, pages={2115–2125}, collection={Forming the Future. The Minerals, Metals &#38; Materials Series.} }","ama":"Rostek T, Makeieva H, Homberg W. Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming. In: Daehn G, Cao J, Kinsey B, Tekkaya AE, Vivek A, Yoshida Y, eds. <i>Proceedings of the 13th International Conference on the Technology of Plasticity</i>. Forming the Future. The Minerals, Metals &#38; Materials Series. Springer, Cham; 2021:2115-2125. doi:<a href=\"https://doi.org/10.1007/978-3-030-75381-8_178\">10.1007/978-3-030-75381-8_178</a>","ieee":"T. Rostek, H. Makeieva, and W. Homberg, “Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming,” in <i>Proceedings of the 13th International Conference on the Technology of Plasticity</i>, Columbus, 2021, pp. 2115–2125, doi: <a href=\"https://doi.org/10.1007/978-3-030-75381-8_178\">10.1007/978-3-030-75381-8_178</a>.","apa":"Rostek, T., Makeieva, H., &#38; Homberg, W. (2021). Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming. In G. Daehn, J. Cao, B. Kinsey, A. E. Tekkaya, A. Vivek, &#38; Y. Yoshida (Eds.), <i>Proceedings of the 13th International Conference on the Technology of Plasticity</i> (pp. 2115–2125). Springer, Cham. <a href=\"https://doi.org/10.1007/978-3-030-75381-8_178\">https://doi.org/10.1007/978-3-030-75381-8_178</a>","short":"T. Rostek, H. Makeieva, W. Homberg, in: G. Daehn, J. Cao, B. Kinsey, A.E. Tekkaya, A. Vivek, Y. Yoshida (Eds.), Proceedings of the 13th International Conference on the Technology of Plasticity, Springer, Cham, Columbus, 2021, pp. 2115–2125.","chicago":"Rostek, Tim, Hanna Makeieva, and Werner Homberg. “Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming.” In <i>Proceedings of the 13th International Conference on the Technology of Plasticity</i>, edited by G. Daehn, J. Cao, B. Kinsey, A. E.  Tekkaya, A. Vivek, and Y Yoshida, 2115–25. Forming the Future. The Minerals, Metals &#38; Materials Series. Columbus: Springer, Cham, 2021. <a href=\"https://doi.org/10.1007/978-3-030-75381-8_178\">https://doi.org/10.1007/978-3-030-75381-8_178</a>."},"quality_controlled":"1","place":"Columbus","title":"Cutting Blades for Food Processing Applications Manufactured Using Innovative Spin Forming","year":"2021","publication_identifier":{"isbn":["978-3-030-75380-1"]},"author":[{"full_name":"Rostek, Tim","last_name":"Rostek","first_name":"Tim","id":"3469"},{"full_name":"Makeieva, Hanna","last_name":"Makeieva","first_name":"Hanna"},{"id":"233","first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner"}],"publication_status":"published","date_updated":"2023-04-27T08:42:00Z","series_title":"Forming the Future. The Minerals, Metals & Materials Series.","language":[{"iso":"eng"}],"doi":"10.1007/978-3-030-75381-8_178","publication":"Proceedings of the 13th International Conference on the Technology of Plasticity","date_created":"2021-03-12T11:11:35Z","type":"conference","department":[{"_id":"156"}]},{"abstract":[{"lang":"eng","text":"The predictive quality of numerical simulations for mechanical joining processes depends on the implemented material model, especially regarding the plasticity of the joining parts. Therefore, experimental material characterization processes are conducted to determine the material properties of sheet metal and generate flow curves. In this regard, there are a number of procedures which are accompanied by varying experimental efforts. This paper presents various methods of determining flow curves for HCT590X as well as EN AW-6014, including varying specimen geometries and diverse hardening laws for extrapolation procedures. The flow curves thus generated are compared considering the variety of plastic strains occurring in mechanical joining processes. The material data generated are implemented in simulation models for the joining technologies, clinching and self-piercing riveting. The influence of the varied methods on the predictive accuracy of the simulation model is analysed. The evaluation of the differing flow curves is achieved by comparing the geometric formation of the joints and the required joining forces of the processes with experimentally investigated joints."}],"publication":"Materials Testing","issue":"6","type":"journal_article","department":[{"_id":"157"},{"_id":"630"}],"date_created":"2021-07-22T11:27:37Z","date_updated":"2023-04-27T08:53:22Z","publication_status":"published","intvolume":"        63","title":"Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes","year":"2021","author":[{"id":"45779","first_name":"Max","last_name":"Böhnke","full_name":"Böhnke, Max"},{"first_name":"Fabian","last_name":"Kappe","full_name":"Kappe, Fabian","id":"66459"},{"id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias","last_name":"Bobbert"},{"id":"32056","last_name":"Meschut","orcid":"0000-0002-2763-1246","first_name":"Gerson","full_name":"Meschut, Gerson"}],"publication_identifier":{"issn":["2195-8572","0025-5300"]},"doi":"10.1515/mt-2020-0082","language":[{"iso":"eng"}],"quality_controlled":"1","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"131","name":"TRR 285 - A: TRR 285 - Project Area A"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"135","name":"TRR 285 – A01: TRR 285 - Subproject A01"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"citation":{"mla":"Böhnke, Max, et al. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.” <i>Materials Testing</i>, vol. 63, no. 6, De Gruyter, 2021, pp. 493–500, doi:<a href=\"https://doi.org/10.1515/mt-2020-0082\">10.1515/mt-2020-0082</a>.","ama":"Böhnke M, Kappe F, Bobbert M, Meschut G. Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. <i>Materials Testing</i>. 2021;63(6):493-500. doi:<a href=\"https://doi.org/10.1515/mt-2020-0082\">10.1515/mt-2020-0082</a>","bibtex":"@article{Böhnke_Kappe_Bobbert_Meschut_2021, title={Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes}, volume={63}, DOI={<a href=\"https://doi.org/10.1515/mt-2020-0082\">10.1515/mt-2020-0082</a>}, number={6}, journal={Materials Testing}, publisher={De Gruyter}, author={Böhnke, Max and Kappe, Fabian and Bobbert, Mathias and Meschut, Gerson}, year={2021}, pages={493–500} }","apa":"Böhnke, M., Kappe, F., Bobbert, M., &#38; Meschut, G. (2021). Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes. <i>Materials Testing</i>, <i>63</i>(6), 493–500. <a href=\"https://doi.org/10.1515/mt-2020-0082\">https://doi.org/10.1515/mt-2020-0082</a>","ieee":"M. Böhnke, F. Kappe, M. Bobbert, and G. Meschut, “Influence of various procedures for the determination of flow curves on the predictive accuracy of numerical simulations for mechanical joining processes,” <i>Materials Testing</i>, vol. 63, no. 6, pp. 493–500, 2021, doi: <a href=\"https://doi.org/10.1515/mt-2020-0082\">10.1515/mt-2020-0082</a>.","short":"M. Böhnke, F. Kappe, M. Bobbert, G. Meschut, Materials Testing 63 (2021) 493–500.","chicago":"Böhnke, Max, Fabian Kappe, Mathias Bobbert, and Gerson Meschut. “Influence of Various Procedures for the Determination of Flow Curves on the Predictive Accuracy of Numerical Simulations for Mechanical Joining Processes.” <i>Materials Testing</i> 63, no. 6 (2021): 493–500. <a href=\"https://doi.org/10.1515/mt-2020-0082\">https://doi.org/10.1515/mt-2020-0082</a>."},"status":"public","user_id":"66459","volume":63,"page":"493-500","publisher":"De Gruyter","_id":"22798"},{"status":"public","_id":"34226","publisher":"Trans Tech Publications, Ltd.","page":"3-10","volume":883,"user_id":"66459","citation":{"bibtex":"@article{Kappe_Bobbert_Meschut_2021, title={New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part}, volume={883}, DOI={<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.3\">10.4028/www.scientific.net/kem.883.3</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.}, author={Kappe, Fabian and Bobbert, Mathias and Meschut, Gerson}, year={2021}, pages={3–10} }","ama":"Kappe F, Bobbert M, Meschut G. New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. <i>Key Engineering Materials</i>. 2021;883:3-10. doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.3\">10.4028/www.scientific.net/kem.883.3</a>","mla":"Kappe, Fabian, et al. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” <i>Key Engineering Materials</i>, vol. 883, Trans Tech Publications, Ltd., 2021, pp. 3–10, doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.3\">10.4028/www.scientific.net/kem.883.3</a>.","chicago":"Kappe, Fabian, Mathias Bobbert, and Gerson Meschut. “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part.” <i>Key Engineering Materials</i> 883 (2021): 3–10. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.3\">https://doi.org/10.4028/www.scientific.net/kem.883.3</a>.","short":"F. Kappe, M. Bobbert, G. Meschut, Key Engineering Materials 883 (2021) 3–10.","ieee":"F. Kappe, M. Bobbert, and G. Meschut, “New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part,” <i>Key Engineering Materials</i>, vol. 883, pp. 3–10, 2021, doi: <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.3\">10.4028/www.scientific.net/kem.883.3</a>.","apa":"Kappe, F., Bobbert, M., &#38; Meschut, G. (2021). New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part. <i>Key Engineering Materials</i>, <i>883</i>, 3–10. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.3\">https://doi.org/10.4028/www.scientific.net/kem.883.3</a>"},"project":[{"grant_number":"418701707","_id":"130","name":"TRR 285: TRR 285"},{"name":"TRR 285 - C: TRR 285 - Project Area C","_id":"133"},{"_id":"146","name":"TRR 285 – C02: TRR 285 - Subproject C02"}],"quality_controlled":"1","author":[{"full_name":"Kappe, Fabian","last_name":"Kappe","first_name":"Fabian","id":"66459"},{"id":"7850","full_name":"Bobbert, Mathias","first_name":"Mathias","last_name":"Bobbert"},{"id":"32056","first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson"}],"publication_identifier":{"issn":["1662-9795"]},"year":"2021","title":"New Approach for Versatile Self Piercing Riveting: Joining System and Auxiliary Part","intvolume":"       883","date_updated":"2023-04-27T08:52:59Z","publication_status":"published","language":[{"iso":"eng"}],"doi":"10.4028/www.scientific.net/kem.883.3","publication":"Key Engineering Materials","abstract":[{"text":"The increasing use of multi-material constructions lead to a continuous increase in the use of mechanical joining techniques due to the wide range of joining possibilities as well as the high load-bearing capacities of the joints. Nevertheless, the currently rigid tool systems are not able to react to changing boundary conditions, like changing the material-geometry-combination. Therefore research work is crucial with regard to versatile joining systems. In this paper, a new approach for a versatile self-piercing riveting process considering the joining system as well as the auxiliary joining part is presented.","lang":"eng"}],"date_created":"2022-12-05T21:54:38Z","department":[{"_id":"630"},{"_id":"157"}],"keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science"],"type":"journal_article"},{"page":"2249-2259","language":[{"iso":"eng"}],"_id":"22766","publisher":"Springer, Cham","doi":"10.1007/978-3-030-75381-8_189","user_id":"64977","title":"Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method","status":"public","year":"2021","conference":{"end_date":"2021-07-30","name":"The 13th International Conference   on the Technology of Plasticity","start_date":"2021-07-25","location":"Ohio, USA, VIRTUAL EVENT"},"publication_identifier":{"issn":["2367-1181","2367-1696"]},"author":[{"first_name":"Frederik","last_name":"Dahms","full_name":"Dahms, Frederik","id":"64977"},{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner","id":"233"}],"date_updated":"2023-04-27T10:30:18Z","publication_status":"published","date_created":"2021-07-16T14:55:05Z","type":"book_chapter","department":[{"_id":"156"}],"publication":"Forming the Future","citation":{"bibtex":"@inbook{Dahms_Homberg_2021, title={Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method}, DOI={<a href=\"https://doi.org/10.1007/978-3-030-75381-8_189\">10.1007/978-3-030-75381-8_189</a>}, booktitle={Forming the Future}, publisher={Springer, Cham}, author={Dahms, Frederik and Homberg, Werner}, year={2021}, pages={2249–2259} }","ama":"Dahms F, Homberg W. Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method. In: <i>Forming the Future</i>. Springer, Cham; 2021:2249-2259. doi:<a href=\"https://doi.org/10.1007/978-3-030-75381-8_189\">10.1007/978-3-030-75381-8_189</a>","mla":"Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method.” <i>Forming the Future</i>, Springer, Cham, 2021, pp. 2249–59, doi:<a href=\"https://doi.org/10.1007/978-3-030-75381-8_189\">10.1007/978-3-030-75381-8_189</a>.","chicago":"Dahms, Frederik, and Werner Homberg. “Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method.” In <i>Forming the Future</i>, 2249–59. Springer, Cham, 2021. <a href=\"https://doi.org/10.1007/978-3-030-75381-8_189\">https://doi.org/10.1007/978-3-030-75381-8_189</a>.","short":"F. Dahms, W. Homberg, in: Forming the Future, Springer, Cham, 2021, pp. 2249–2259.","ieee":"F. Dahms and W. Homberg, “Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method,” in <i>Forming the Future</i>, Springer, Cham, 2021, pp. 2249–2259.","apa":"Dahms, F., &#38; Homberg, W. (2021). Investigations and Improvements in 3D-DIC Optical Residual Stress Analysis—A New Temperature Compensation Method. In <i>Forming the Future</i> (pp. 2249–2259). Springer, Cham. <a href=\"https://doi.org/10.1007/978-3-030-75381-8_189\">https://doi.org/10.1007/978-3-030-75381-8_189</a>"},"quality_controlled":"1"},{"citation":{"ieee":"A. Paul <i>et al.</i>, “Determining the heat flow through the cabinet walls of household refrigerating appliances,” <i>International Journal of Refrigeration</i>, pp. 235–242, 2021, doi: <a href=\"https://doi.org/10.1016/j.ijrefrig.2020.10.007\">10.1016/j.ijrefrig.2020.10.007</a>.","apa":"Paul, A., Baumhögger, E., Elsner, A., Moczarski, L., Reineke, M., Sonnenrein, G., Hueppe, C., Stamminger, R., Hoelscher, H., Wagner, H., Gries, U., Freiberger, A., Becker, W., &#38; Vrabec, J. (2021). Determining the heat flow through the cabinet walls of household refrigerating appliances. <i>International Journal of Refrigeration</i>, 235–242. <a href=\"https://doi.org/10.1016/j.ijrefrig.2020.10.007\">https://doi.org/10.1016/j.ijrefrig.2020.10.007</a>","chicago":"Paul, Andreas, Elmar Baumhögger, Andreas Elsner, Lukas Moczarski, Michael Reineke, Gerrit Sonnenrein, Christian Hueppe, et al. “Determining the Heat Flow through the Cabinet Walls of Household Refrigerating Appliances.” <i>International Journal of Refrigeration</i>, 2021, 235–42. <a href=\"https://doi.org/10.1016/j.ijrefrig.2020.10.007\">https://doi.org/10.1016/j.ijrefrig.2020.10.007</a>.","short":"A. Paul, E. Baumhögger, A. Elsner, L. Moczarski, M. Reineke, G. Sonnenrein, C. Hueppe, R. Stamminger, H. Hoelscher, H. Wagner, U. Gries, A. Freiberger, W. Becker, J. Vrabec, International Journal of Refrigeration (2021) 235–242.","mla":"Paul, Andreas, et al. “Determining the Heat Flow through the Cabinet Walls of Household Refrigerating Appliances.” <i>International Journal of Refrigeration</i>, 2021, pp. 235–42, doi:<a href=\"https://doi.org/10.1016/j.ijrefrig.2020.10.007\">10.1016/j.ijrefrig.2020.10.007</a>.","bibtex":"@article{Paul_Baumhögger_Elsner_Moczarski_Reineke_Sonnenrein_Hueppe_Stamminger_Hoelscher_Wagner_et al._2021, title={Determining the heat flow through the cabinet walls of household refrigerating appliances}, DOI={<a href=\"https://doi.org/10.1016/j.ijrefrig.2020.10.007\">10.1016/j.ijrefrig.2020.10.007</a>}, journal={International Journal of Refrigeration}, author={Paul, Andreas and Baumhögger, Elmar and Elsner, Andreas and Moczarski, Lukas and Reineke, Michael and Sonnenrein, Gerrit and Hueppe, Christian and Stamminger, Rainer and Hoelscher, Heike and Wagner, Hendrik and et al.}, year={2021}, pages={235–242} }","ama":"Paul A, Baumhögger E, Elsner A, et al. Determining the heat flow through the cabinet walls of household refrigerating appliances. <i>International Journal of Refrigeration</i>. Published online 2021:235-242. doi:<a href=\"https://doi.org/10.1016/j.ijrefrig.2020.10.007\">10.1016/j.ijrefrig.2020.10.007</a>"},"publication":"International Journal of Refrigeration","quality_controlled":"1","abstract":[{"lang":"eng","text":"The increase of the thermal conductivity of PUR foam in the insulation of the cabinet is an important cause for aging processes of household refrigerating appliances. To determine the influence of the PUR foam aging on energy consumption, the development of a new measurement method is necessary be- cause current methods influence the aging behavior of household refrigerators and are therefore not applicable in general. Based on a latent heat sink, constructed as an ice water bucket, a new measure- ment method is developed to determine the k ·A value over time. With this method, the k ·A value of four household refrigerating appliances was determined over an interval of 14 months. The k ·A value increased between 3.6% and 11.5% during this period."}],"date_created":"2021-01-13T09:12:09Z","department":[{"_id":"728"},{"_id":"155"},{"_id":"393"},{"_id":"9"}],"type":"journal_article","publication_identifier":{"issn":["0140-7007"]},"author":[{"id":"7828","full_name":"Paul, Andreas","first_name":"Andreas","last_name":"Paul"},{"full_name":"Baumhögger, Elmar","last_name":"Baumhögger","first_name":"Elmar","id":"15164"},{"id":"16124","first_name":"Andreas","last_name":"Elsner","full_name":"Elsner, Andreas"},{"first_name":"Lukas","last_name":"Moczarski","full_name":"Moczarski, Lukas"},{"full_name":"Reineke, Michael","last_name":"Reineke","first_name":"Michael","id":"24603"},{"full_name":"Sonnenrein, Gerrit","first_name":"Gerrit","last_name":"Sonnenrein"},{"first_name":"Christian","last_name":"Hueppe","full_name":"Hueppe, Christian"},{"full_name":"Stamminger, Rainer","last_name":"Stamminger","first_name":"Rainer"},{"first_name":"Heike","last_name":"Hoelscher","full_name":"Hoelscher, Heike"},{"full_name":"Wagner, Hendrik","last_name":"Wagner","first_name":"Hendrik"},{"first_name":"Ulrich","last_name":"Gries","full_name":"Gries, Ulrich"},{"first_name":"Alfred","last_name":"Freiberger","full_name":"Freiberger, Alfred"},{"full_name":"Becker, Wolfgang","first_name":"Wolfgang","last_name":"Becker"},{"full_name":"Vrabec, Jadran","first_name":"Jadran","last_name":"Vrabec"}],"status":"public","title":"Determining the heat flow through the cabinet walls of household refrigerating appliances","year":"2021","date_updated":"2023-04-27T11:09:45Z","publication_status":"published","_id":"20921","language":[{"iso":"eng"}],"page":"235-242","doi":"10.1016/j.ijrefrig.2020.10.007","user_id":"7828"},{"department":[{"_id":"728"},{"_id":"9"}],"type":"journal_article","date_created":"2021-11-09T13:17:23Z","quality_controlled":"1","abstract":[{"text":"Domestic refrigeration appliances are standard household commodities. Although policies, such as the energy labelling, prompted technical improvements and decreased appliance energy consumption throughout recent decades, important parameters were disregarded. These refer to the efficiency loss over time and the consumer behaviour. The objective of this contribution was to develop a dynamic energy model to determine the power consumption of refrigeration appliances considering degradation factors and behaviour. These were included by model parameters for direct consumer interactions, such as the storage behaviour, door openings and temperature setting, as well as indirect actions, e.g. exposing an appliance to specific temperature conditions at an installation site. For this, an online-survey was conducted to evaluate the consumer behaviour. A total of 706 consumers participated in the national questionnaire, serving as input for the dynamic energy model. It was found that the efficiency loss increases the power consumption by at least 1% annually, leading to an excess of 10% after 10 years of usage. Another important finding was that 32.5% of appliance’s power consumption results from consumer behaviour, whereas the promotion of behavioural changes leads to a significant decrease of the consumer-induced consumption. Consequently, this study provides a tool to evaluate the impact of policies targeting refrigeration appliances, stressing that efficiency loss and behaviour should be integrated into future policy approaches.","lang":"eng"}],"citation":{"bibtex":"@article{Hueppe_Geppert_Moenninghoff-Juessen_Wolff_Stamminger_Paul_Elsner_Vrabec_Wagner_Hoelscher_et al._2021, title={Investigating the real life energy consumption of refrigeration appliances in Germany: Are present policies sufficient?}, DOI={<a href=\"https://doi.org/10.1016/j.enpol.2021.112275\">10.1016/j.enpol.2021.112275</a>}, number={112275}, journal={Energy Policy}, author={Hueppe, Christian and Geppert, Jasmin and Moenninghoff-Juessen, Julia and Wolff, Lena and Stamminger, Rainer and Paul, Andreas and Elsner, Andreas and Vrabec, Jadran and Wagner, Hendrik and Hoelscher, Heike and et al.}, year={2021} }","ama":"Hueppe C, Geppert J, Moenninghoff-Juessen J, et al. Investigating the real life energy consumption of refrigeration appliances in Germany: Are present policies sufficient? <i>Energy Policy</i>. Published online 2021. doi:<a href=\"https://doi.org/10.1016/j.enpol.2021.112275\">10.1016/j.enpol.2021.112275</a>","mla":"Hueppe, Christian, et al. “Investigating the Real Life Energy Consumption of Refrigeration Appliances in Germany: Are Present Policies Sufficient?” <i>Energy Policy</i>, 112275, 2021, doi:<a href=\"https://doi.org/10.1016/j.enpol.2021.112275\">10.1016/j.enpol.2021.112275</a>.","chicago":"Hueppe, Christian, Jasmin Geppert, Julia Moenninghoff-Juessen, Lena Wolff, Rainer Stamminger, Andreas Paul, Andreas Elsner, et al. “Investigating the Real Life Energy Consumption of Refrigeration Appliances in Germany: Are Present Policies Sufficient?” <i>Energy Policy</i>, 2021. <a href=\"https://doi.org/10.1016/j.enpol.2021.112275\">https://doi.org/10.1016/j.enpol.2021.112275</a>.","short":"C. Hueppe, J. Geppert, J. Moenninghoff-Juessen, L. Wolff, R. Stamminger, A. Paul, A. Elsner, J. Vrabec, H. Wagner, H. Hoelscher, W. Becker, U. Gries, A. Freiberger, Energy Policy (2021).","ieee":"C. Hueppe <i>et al.</i>, “Investigating the real life energy consumption of refrigeration appliances in Germany: Are present policies sufficient?,” <i>Energy Policy</i>, Art. no. 112275, 2021, doi: <a href=\"https://doi.org/10.1016/j.enpol.2021.112275\">10.1016/j.enpol.2021.112275</a>.","apa":"Hueppe, C., Geppert, J., Moenninghoff-Juessen, J., Wolff, L., Stamminger, R., Paul, A., Elsner, A., Vrabec, J., Wagner, H., Hoelscher, H., Becker, W., Gries, U., &#38; Freiberger, A. (2021). Investigating the real life energy consumption of refrigeration appliances in Germany: Are present policies sufficient? <i>Energy Policy</i>, Article 112275. <a href=\"https://doi.org/10.1016/j.enpol.2021.112275\">https://doi.org/10.1016/j.enpol.2021.112275</a>"},"publication":"Energy Policy","doi":"10.1016/j.enpol.2021.112275","user_id":"7828","language":[{"iso":"eng"}],"_id":"27290","article_number":"112275","date_updated":"2023-04-27T11:11:28Z","publication_status":"published","author":[{"first_name":"Christian","last_name":"Hueppe","full_name":"Hueppe, Christian"},{"full_name":"Geppert, Jasmin","last_name":"Geppert","first_name":"Jasmin"},{"full_name":"Moenninghoff-Juessen, Julia","last_name":"Moenninghoff-Juessen","first_name":"Julia"},{"full_name":"Wolff, Lena","last_name":"Wolff","first_name":"Lena"},{"last_name":"Stamminger","first_name":"Rainer","full_name":"Stamminger, Rainer"},{"full_name":"Paul, Andreas","last_name":"Paul","first_name":"Andreas","id":"7828"},{"full_name":"Elsner, Andreas","first_name":"Andreas","last_name":"Elsner","id":"16124"},{"full_name":"Vrabec, Jadran","first_name":"Jadran","last_name":"Vrabec"},{"last_name":"Wagner","first_name":"Hendrik","full_name":"Wagner, Hendrik"},{"first_name":"Heike","last_name":"Hoelscher","full_name":"Hoelscher, Heike"},{"first_name":"Wolfgang","last_name":"Becker","full_name":"Becker, Wolfgang"},{"full_name":"Gries, Ulrich","last_name":"Gries","first_name":"Ulrich"},{"first_name":"Alfred","last_name":"Freiberger","full_name":"Freiberger, Alfred"}],"publication_identifier":{"issn":["0301-4215"]},"year":"2021","title":"Investigating the real life energy consumption of refrigeration appliances in Germany: Are present policies sufficient?","status":"public"},{"status":"public","year":"2021","title":"Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung","conference":{"name":"11. Doktorandenseminar Klebtechnik","start_date":"2020-09-08","location":"Aachen","end_date":"2020-09-09"},"author":[{"id":"59070","last_name":"Göddecke","first_name":"Johannes","full_name":"Göddecke, Johannes"},{"orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson","full_name":"Meschut, Gerson","id":"32056"}],"date_updated":"2023-04-28T08:58:16Z","publication_status":"inpress","publisher":"DVS Media GmbH","_id":"22264","language":[{"iso":"ger"}],"user_id":"59070","publication":"11. Doktorandenseminar Klebtechnik","citation":{"apa":"Göddecke, J., &#38; Meschut, G. (n.d.). Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. <i>11. Doktorandenseminar Klebtechnik</i>. 11. Doktorandenseminar Klebtechnik, Aachen.","ieee":"J. Göddecke and G. Meschut, “Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung,” presented at the 11. Doktorandenseminar Klebtechnik, Aachen.","short":"J. Göddecke, G. Meschut, in: 11. Doktorandenseminar Klebtechnik, DVS Media GmbH, Düsseldorf, n.d.","chicago":"Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.” In <i>11. Doktorandenseminar Klebtechnik</i>. Düsseldorf: DVS Media GmbH, n.d.","mla":"Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung.” <i>11. Doktorandenseminar Klebtechnik</i>, DVS Media GmbH.","ama":"Göddecke J, Meschut G. Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. In: <i>11. Doktorandenseminar Klebtechnik</i>. DVS Media GmbH.","bibtex":"@inproceedings{Göddecke_Meschut, place={Düsseldorf}, title={Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung}, booktitle={11. Doktorandenseminar Klebtechnik}, publisher={DVS Media GmbH}, author={Göddecke, Johannes and Meschut, Gerson} }"},"quality_controlled":"1","place":"Düsseldorf","date_created":"2021-05-28T09:30:43Z","type":"conference","department":[{"_id":"157"}]},{"doi":"10.4028/www.scientific.net/kem.883.73","user_id":"38177","page":"73-80","language":[{"iso":"eng"}],"_id":"24541","date_updated":"2023-04-28T11:57:49Z","publication_status":"published","status":"public","title":"Load Path Transmission in Joining Elements","year":"2021","author":[{"full_name":"Steinfelder, Christian","last_name":"Steinfelder","first_name":"Christian"},{"id":"38177","first_name":"Sven","last_name":"Martin","full_name":"Martin, Sven"},{"first_name":"Alexander","last_name":"Brosius","full_name":"Brosius, Alexander"},{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"}],"publication_identifier":{"issn":["1662-9795"]},"type":"journal_article","department":[{"_id":"321"},{"_id":"149"},{"_id":"630"}],"date_created":"2021-09-16T08:23:00Z","abstract":[{"lang":"eng","text":"<jats:p>The mechanical properties of joined structures are determined considerably by the chosen joining technology. With the aim of providing a method that enables a faster and more profound decision-making in the spatial distribution of joining points during product development, a new method for the load path analysis of joining points is presented. For an exemplary car body, the load type in the joining elements, i.e. pure tensile, shear and combined tensile-shear loads, is determined using finite element analysis (FEA). Based on the evaluated loads, the resulting load paths in selected joining points are analyzed using a 2D FE-model of a clinching point. State of the art methods for load path analysis are dependent on the selected coordinate system or the existing stress state. Thus, a general statement about the load transmission path is not possible at this time. Here, a novel method for the analysis of load paths is used, which is independent of the alignment of the analyzed geometry. The basic assumption of the new load path analysis method was confirmed by using a simple specimen with a square hole in different orientations. The results presented here show a possibility to display the load transmission path invariantly. In further steps, the method will be extended for 3D analysis and the investigation of more complex assemblies. The primary goal of this methodical approach is an even load distribution over the joining elements and the component. This will provide a basis for future design approaches aimed at reducing the number of joining elements in joined structures.</jats:p>"}],"quality_controlled":"1","project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"_id":"132","name":"TRR 285 - B: TRR 285 - Project Area B"},{"_id":"140","name":"TRR 285 – B01: TRR 285 - Subproject B01"}],"publication":"Key Engineering Materials","citation":{"short":"C. Steinfelder, S. Martin, A. Brosius, T. Tröster, Key Engineering Materials (2021) 73–80.","chicago":"Steinfelder, Christian, Sven Martin, Alexander Brosius, and Thomas Tröster. “Load Path Transmission in Joining Elements.” <i>Key Engineering Materials</i>, 2021, 73–80. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.73\">https://doi.org/10.4028/www.scientific.net/kem.883.73</a>.","ieee":"C. Steinfelder, S. Martin, A. Brosius, and T. Tröster, “Load Path Transmission in Joining Elements,” <i>Key Engineering Materials</i>, pp. 73–80, 2021, doi: <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.73\">10.4028/www.scientific.net/kem.883.73</a>.","apa":"Steinfelder, C., Martin, S., Brosius, A., &#38; Tröster, T. (2021). Load Path Transmission in Joining Elements. <i>Key Engineering Materials</i>, 73–80. <a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.73\">https://doi.org/10.4028/www.scientific.net/kem.883.73</a>","bibtex":"@article{Steinfelder_Martin_Brosius_Tröster_2021, title={Load Path Transmission in Joining Elements}, DOI={<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.73\">10.4028/www.scientific.net/kem.883.73</a>}, journal={Key Engineering Materials}, author={Steinfelder, Christian and Martin, Sven and Brosius, Alexander and Tröster, Thomas}, year={2021}, pages={73–80} }","ama":"Steinfelder C, Martin S, Brosius A, Tröster T. Load Path Transmission in Joining Elements. <i>Key Engineering Materials</i>. Published online 2021:73-80. doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.73\">10.4028/www.scientific.net/kem.883.73</a>","mla":"Steinfelder, Christian, et al. “Load Path Transmission in Joining Elements.” <i>Key Engineering Materials</i>, 2021, pp. 73–80, doi:<a href=\"https://doi.org/10.4028/www.scientific.net/kem.883.73\">10.4028/www.scientific.net/kem.883.73</a>."}},{"project":[{"name":"TRR 285: TRR 285","_id":"130","grant_number":"418701707"},{"name":"TRR 285 - B: TRR 285 - Project Area B","_id":"132"},{"_id":"140","name":"TRR 285 – B01: TRR 285 - Subproject B01"}],"quality_controlled":"1","citation":{"mla":"Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.” <i>ESAFORM 2021</i>, 2021, doi:<a href=\"https://doi.org/10.25518/esaform21.3801\">10.25518/esaform21.3801</a>.","ama":"Martin S, Tröster T. Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. <i>ESAFORM 2021</i>. Published online 2021. doi:<a href=\"https://doi.org/10.25518/esaform21.3801\">10.25518/esaform21.3801</a>","bibtex":"@article{Martin_Tröster_2021, title={Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties}, DOI={<a href=\"https://doi.org/10.25518/esaform21.3801\">10.25518/esaform21.3801</a>}, journal={ESAFORM 2021}, author={Martin, Sven and Tröster, Thomas}, year={2021} }","apa":"Martin, S., &#38; Tröster, T. (2021). Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties. <i>ESAFORM 2021</i>. <a href=\"https://doi.org/10.25518/esaform21.3801\">https://doi.org/10.25518/esaform21.3801</a>","ieee":"S. Martin and T. Tröster, “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties,” <i>ESAFORM 2021</i>, 2021, doi: <a href=\"https://doi.org/10.25518/esaform21.3801\">10.25518/esaform21.3801</a>.","short":"S. Martin, T. Tröster, ESAFORM 2021 (2021).","chicago":"Martin, Sven, and Thomas Tröster. “Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties.” <i>ESAFORM 2021</i>, 2021. <a href=\"https://doi.org/10.25518/esaform21.3801\">https://doi.org/10.25518/esaform21.3801</a>."},"publication":"ESAFORM 2021","oa":"1","department":[{"_id":"321"},{"_id":"149"},{"_id":"630"}],"type":"journal_article","date_created":"2021-09-16T08:34:41Z","date_updated":"2023-04-28T11:58:00Z","publication_status":"published","author":[{"id":"38177","last_name":"Martin","first_name":"Sven","full_name":"Martin, Sven"},{"full_name":"Tröster, Thomas","first_name":"Thomas","last_name":"Tröster"}],"status":"public","year":"2021","title":"Joint point loadings in car bodies – the influence of manufacturing tolerances and scatter in material properties","doi":"10.25518/esaform21.3801","user_id":"38177","language":[{"iso":"fre"}],"_id":"24548","main_file_link":[{"url":"https://popups.uliege.be/esaform21/index.php?id=3801","open_access":"1"}]},{"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"type":"conference","date_created":"2021-10-28T13:44:02Z","quality_controlled":"1","citation":{"chicago":"Stallmeister, Tim, Sven Martin, Thorsten Marten, and Thomas Tröster. “Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases,” 2021.","short":"T. Stallmeister, S. Martin, T. Marten, T. Tröster, in: 2021.","apa":"Stallmeister, T., Martin, S., Marten, T., &#38; Tröster, T. (2021). <i>Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases</i>. Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim.","ieee":"T. Stallmeister, S. Martin, T. Marten, and T. Tröster, “Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases,” presented at the Automotive Circle conference – Battery Systems in Car Body Engineering 2021, Bad Nauheim, 2021.","ama":"Stallmeister T, Martin S, Marten T, Tröster T. Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases. In: ; 2021.","bibtex":"@inproceedings{Stallmeister_Martin_Marten_Tröster_2021, title={Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases}, author={Stallmeister, Tim and Martin, Sven and Marten, Thorsten and Tröster, Thomas}, year={2021} }","mla":"Stallmeister, Tim, et al. <i>Experimental Investigation on Lightweight Potentials of Fiber-Metal-Laminates for Automotive Battery Cases</i>. 2021."},"user_id":"38177","_id":"26994","language":[{"iso":"eng"}],"date_updated":"2023-04-28T11:58:31Z","author":[{"id":"45538","last_name":"Stallmeister","first_name":"Tim","full_name":"Stallmeister, Tim"},{"last_name":"Martin","first_name":"Sven","full_name":"Martin, Sven","id":"38177"},{"last_name":"Marten","first_name":"Thorsten","full_name":"Marten, Thorsten","id":"338"},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"}],"conference":{"end_date":"2021-10-27","location":"Bad Nauheim","start_date":"2021-10-26","name":"Automotive Circle conference – Battery Systems in Car Body Engineering 2021"},"title":"Experimental investigation on lightweight potentials of fiber-metal-laminates for automotive battery cases","year":"2021","status":"public"},{"date_created":"2021-09-07T08:53:24Z","department":[{"_id":"9"},{"_id":"367"}],"type":"conference","citation":{"chicago":"Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts.” In <i>ANTEC 21</i>, 2021.","short":"M. Dörner, V. Schöppner, in: ANTEC 21, 2021.","ieee":"M. Dörner and V. Schöppner, “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts,” presented at the ANTEC 21, 2021.","apa":"Dörner, M., &#38; Schöppner, V. (2021). Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts. <i>ANTEC 21</i>. ANTEC 21.","bibtex":"@inproceedings{Dörner_Schöppner_2021, title={Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts}, booktitle={ANTEC 21}, author={Dörner, Marius and Schöppner, Volker}, year={2021} }","ama":"Dörner M, Schöppner V. Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts. In: <i>ANTEC 21</i>. ; 2021.","mla":"Dörner, Marius, and Volker Schöppner. “Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts.” <i>ANTEC 21</i>, 2021."},"publication":"ANTEC 21","language":[{"iso":"eng"}],"_id":"23835","user_id":"44116","conference":{"name":"ANTEC 21","start_date":"2021-01-12","end_date":"2021-01-12"},"author":[{"last_name":"Dörner","first_name":"Marius","full_name":"Dörner, Marius"},{"full_name":"Schöppner, Volker","first_name":"Volker","last_name":"Schöppner","id":"20530"}],"year":"2021","status":"public","title":"Development of an Analytical Mathematical Modelling Approach for a More Precise Description of Disperse Melting in Solid Bed Breaking Screw Concepts","date_updated":"2023-05-02T06:54:15Z"},{"quality_controlled":"1","issue":"12","publication":" Journal of  Composites Science","citation":{"short":"E. Moritzer, M. Richters,  Journal of  Composites Science (2021).","chicago":"Moritzer, Elmar, and Maximilian Richters. “Injection Molding of Wood-Filled Thermoplastic Polyurethane.” <i> Journal of  Composites Science</i>, no. 12 (2021).","ieee":"E. Moritzer and M. Richters, “Injection Molding of Wood-Filled Thermoplastic Polyurethane,” <i> Journal of  Composites Science</i>, no. 12, 2021.","apa":"Moritzer, E., &#38; Richters, M. (2021). Injection Molding of Wood-Filled Thermoplastic Polyurethane. <i> Journal of  Composites Science</i>, <i>12</i>.","bibtex":"@article{Moritzer_Richters_2021, title={Injection Molding of Wood-Filled Thermoplastic Polyurethane}, number={12}, journal={ Journal of  Composites Science}, author={Moritzer, Elmar and Richters, Maximilian}, year={2021} }","ama":"Moritzer E, Richters M. Injection Molding of Wood-Filled Thermoplastic Polyurethane. <i> Journal of  Composites Science</i>. 2021;(12).","mla":"Moritzer, Elmar, and Maximilian Richters. “Injection Molding of Wood-Filled Thermoplastic Polyurethane.” <i> Journal of  Composites Science</i>, no. 12, 2021."},"type":"journal_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2022-06-07T09:50:44Z","date_updated":"2023-05-02T07:04:16Z","status":"public","title":"Injection Molding of Wood-Filled Thermoplastic Polyurethane","year":"2021","publication_identifier":{"issn":["2504-477X"]},"author":[{"full_name":"Moritzer, Elmar","last_name":"Moritzer","first_name":"Elmar","id":"20531"},{"id":"38221","full_name":"Richters, Maximilian","last_name":"Richters","first_name":"Maximilian"}],"user_id":"44116","_id":"31769","language":[{"iso":"eng"}]},{"quality_controlled":"1","publication":"Welding in the World","citation":{"ieee":"E. Moritzer and D. Krassmann, “Development of a new joining technology for hybrid joints of sheet metal  and continuous fiber-reinforced thermoplastics,” <i>Welding in the World</i>, 2021.","apa":"Moritzer, E., &#38; Krassmann, D. (2021). Development of a new joining technology for hybrid joints of sheet metal  and continuous fiber-reinforced thermoplastics. <i>Welding in the World</i>.","short":"E. Moritzer, D. Krassmann, Welding in the World (2021).","chicago":"Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology for Hybrid Joints of Sheet Metal  and Continuous Fiber-Reinforced Thermoplastics.” <i>Welding in the World</i>, 2021.","mla":"Moritzer, Elmar, and Dimitri Krassmann. “Development of a New Joining Technology for Hybrid Joints of Sheet Metal  and Continuous Fiber-Reinforced Thermoplastics.” <i>Welding in the World</i>, 2021.","bibtex":"@article{Moritzer_Krassmann_2021, title={Development of a new joining technology for hybrid joints of sheet metal  and continuous fiber-reinforced thermoplastics}, journal={Welding in the World}, author={Moritzer, Elmar and Krassmann, Dimitri}, year={2021} }","ama":"Moritzer E, Krassmann D. Development of a new joining technology for hybrid joints of sheet metal  and continuous fiber-reinforced thermoplastics. <i>Welding in the World</i>. Published online 2021."},"type":"journal_article","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"date_created":"2022-06-07T09:37:48Z","date_updated":"2023-05-02T07:04:57Z","year":"2021","title":"Development of a new joining technology for hybrid joints of sheet metal  and continuous fiber-reinforced thermoplastics","status":"public","author":[{"id":"20531","last_name":"Moritzer","first_name":"Elmar","full_name":"Moritzer, Elmar"},{"last_name":"Krassmann","first_name":"Dimitri","full_name":"Krassmann, Dimitri","id":"41916"}],"user_id":"44116","_id":"31757","language":[{"iso":"eng"}]}]