[{"_id":"9783","department":[{"_id":"151"}],"user_id":"55222","keyword":["cavitation","chemical reactors","microphones","process monitoring","reliability","ultrasonic applications","ultrasonic waves","acoustic properties","cavitation based ultrasound applications","cavitation intensity","change detection reliability","external microphone","malfunction detection reliability","nonperturbing cavitation detection","nonperturbing cavitation monitoring","process monitoring","self-sensing ultrasound transducer","sonochemical reactors","sonochemistry","ultrasound cleaning","ultrasound irradiation","Acoustics","Liquids","Monitoring","Sensors","Sonar equipment","Transducers","Ultrasonic imaging"],"language":[{"iso":"eng"}],"publication":"Ultrasonics Symposium (IUS), 2012 IEEE International","type":"conference","abstract":[{"text":"To optimize the ultrasound irradiation for cavitation based ultrasound applications like sonochemistry or ultrasound cleaning, the correlation between cavitation intensity and the resulting effect on the process is of interest. Furthermore, changing conditions like temperature and pressure result in varying acoustic properties of the liquid. That might necessitate an adaption of the ultrasound irradiation. To detect such changes during operation, process monitoring is desired. Labor intensive processes, that might be carried out for several hours, also require process monitoring to increase their reliability by detection of changes or malfunctions during operation. In some applications cavitation detection and monitoring can be achieved by the application of sensors in the sound field. Though the application of sensors is possible, this necessitates modifications on the system and the sensor might disturb the sound field. In other applications harsh, process conditions prohibit the application of sensors in the sound field. Therefore alternative techniques for cavitation detection and monitoring are desired. The applicability of an external microphone and a self-sensing ultrasound transducer for cavitation detection were experimentally investigated. Both methods were found to be suitable and easily applicable.","lang":"eng"}],"status":"public","date_updated":"2022-01-06T07:04:20Z","author":[{"full_name":"Bornmann, Peter","last_name":"Bornmann","first_name":"Peter"},{"last_name":"Hemsel","id":"210","full_name":"Hemsel, Tobias","first_name":"Tobias"},{"first_name":"Walter","id":"21220","full_name":"Sextro, Walter","last_name":"Sextro"},{"last_name":"Maeda","full_name":"Maeda, Takafumi","first_name":"Takafumi"},{"full_name":"Morita, Takeshi","last_name":"Morita","first_name":"Takeshi"}],"date_created":"2019-05-13T13:18:49Z","title":"Non-perturbing cavitation detection / monitoring in sonochemical reactors","doi":"10.1109/ULTSYM.2012.0284","publication_identifier":{"issn":["1948-5719"]},"quality_controlled":"1","year":"2012","page":"1141-1144","citation":{"mla":"Bornmann, Peter, et al. “Non-Perturbing Cavitation Detection / Monitoring in Sonochemical Reactors.” <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 2012, pp. 1141–44, doi:<a href=\"https://doi.org/10.1109/ULTSYM.2012.0284\">10.1109/ULTSYM.2012.0284</a>.","bibtex":"@inproceedings{Bornmann_Hemsel_Sextro_Maeda_Morita_2012, title={Non-perturbing cavitation detection / monitoring in sonochemical reactors}, DOI={<a href=\"https://doi.org/10.1109/ULTSYM.2012.0284\">10.1109/ULTSYM.2012.0284</a>}, booktitle={Ultrasonics Symposium (IUS), 2012 IEEE International}, author={Bornmann, Peter and Hemsel, Tobias and Sextro, Walter and Maeda, Takafumi and Morita, Takeshi}, year={2012}, pages={1141–1144} }","short":"P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, T. Morita, in: Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 1141–1144.","apa":"Bornmann, P., Hemsel, T., Sextro, W., Maeda, T., &#38; Morita, T. (2012). Non-perturbing cavitation detection / monitoring in sonochemical reactors. In <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i> (pp. 1141–1144). <a href=\"https://doi.org/10.1109/ULTSYM.2012.0284\">https://doi.org/10.1109/ULTSYM.2012.0284</a>","chicago":"Bornmann, Peter, Tobias Hemsel, Walter Sextro, Takafumi Maeda, and Takeshi Morita. “Non-Perturbing Cavitation Detection / Monitoring in Sonochemical Reactors.” In <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 1141–44, 2012. <a href=\"https://doi.org/10.1109/ULTSYM.2012.0284\">https://doi.org/10.1109/ULTSYM.2012.0284</a>.","ieee":"P. Bornmann, T. Hemsel, W. Sextro, T. Maeda, and T. Morita, “Non-perturbing cavitation detection / monitoring in sonochemical reactors,” in <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 2012, pp. 1141–1144.","ama":"Bornmann P, Hemsel T, Sextro W, Maeda T, Morita T. Non-perturbing cavitation detection / monitoring in sonochemical reactors. In: <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>. ; 2012:1141-1144. doi:<a href=\"https://doi.org/10.1109/ULTSYM.2012.0284\">10.1109/ULTSYM.2012.0284</a>"}},{"date_updated":"2022-01-06T07:04:20Z","author":[{"first_name":"Matthias","full_name":"Hunstig, Matthias","last_name":"Hunstig"},{"first_name":"Tobias","last_name":"Hemsel","full_name":"Hemsel, Tobias"},{"first_name":"Walter","last_name":"Sextro","full_name":"Sextro, Walter"}],"date_created":"2019-05-13T13:20:17Z","title":"An efficient simulation technique for high-frequency piezoelectric inertia motors","doi":"10.1109/ULTSYM.2012.0068","quality_controlled":"1","publication_identifier":{"issn":["1948-5719"]},"year":"2012","citation":{"chicago":"Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “An Efficient Simulation Technique for High-Frequency Piezoelectric Inertia Motors.” In <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 277–80, 2012. <a href=\"https://doi.org/10.1109/ULTSYM.2012.0068\">https://doi.org/10.1109/ULTSYM.2012.0068</a>.","ieee":"M. Hunstig, T. Hemsel, and W. Sextro, “An efficient simulation technique for high-frequency piezoelectric inertia motors,” in <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 2012, pp. 277–280.","ama":"Hunstig M, Hemsel T, Sextro W. An efficient simulation technique for high-frequency piezoelectric inertia motors. In: <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>. ; 2012:277-280. doi:<a href=\"https://doi.org/10.1109/ULTSYM.2012.0068\">10.1109/ULTSYM.2012.0068</a>","apa":"Hunstig, M., Hemsel, T., &#38; Sextro, W. (2012). An efficient simulation technique for high-frequency piezoelectric inertia motors. In <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i> (pp. 277–280). <a href=\"https://doi.org/10.1109/ULTSYM.2012.0068\">https://doi.org/10.1109/ULTSYM.2012.0068</a>","short":"M. Hunstig, T. Hemsel, W. Sextro, in: Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 277–280.","bibtex":"@inproceedings{Hunstig_Hemsel_Sextro_2012, title={An efficient simulation technique for high-frequency piezoelectric inertia motors}, DOI={<a href=\"https://doi.org/10.1109/ULTSYM.2012.0068\">10.1109/ULTSYM.2012.0068</a>}, booktitle={Ultrasonics Symposium (IUS), 2012 IEEE International}, author={Hunstig, Matthias and Hemsel, Tobias and Sextro, Walter}, year={2012}, pages={277–280} }","mla":"Hunstig, Matthias, et al. “An Efficient Simulation Technique for High-Frequency Piezoelectric Inertia Motors.” <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 2012, pp. 277–80, doi:<a href=\"https://doi.org/10.1109/ULTSYM.2012.0068\">10.1109/ULTSYM.2012.0068</a>."},"page":"277-280","_id":"9784","user_id":"55222","department":[{"_id":"151"}],"keyword":["friction","ultrasonic motors","Coulomb friction model","efficient simulation technique","friction contact","high-frequency piezoelectric inertia motor","motor characteristics prediction","numerical simulation","slip-slip mode","stick-slip mode","time-step simulation","ultrasonic inertia motor","Acceleration","Acoustics","Actuators","Computational modeling","Friction","Numerical models","Steady-state"],"language":[{"iso":"eng"}],"type":"conference","publication":"Ultrasonics Symposium (IUS), 2012 IEEE International","abstract":[{"lang":"eng","text":"Piezoelectric inertia motors use the inertia of a body to drive it by means of a friction contact in a series of small steps. These motors can operate in ``stick-slip'' or ``slip-slip'' mode, with the fundamental frequency of the driving signal ranging from several Hertz to more than 100 kHz. To predict the motor characteristics, a Coulomb friction model is sufficient in many cases, but numerical simulation requires microscopic time steps. This contribution proposes a much faster simulation technique using one evaluation per period of the excitation signal. The proposed technique produces results very close to those of timestep simulation for ultrasonics inertia motors and allows direct determination of the steady-state velocity of an inertia motor from the motion profile of the driving part. Thus it is a useful simulation technique which can be applied in both analysis and design of inertia motors, especially for parameter studies and optimisation."}],"status":"public"},{"editor":[{"last_name":"B. J. Linde","full_name":"B. J. Linde, Bogumil","first_name":"Bogumil"},{"first_name":"Jacek","full_name":"Paczkowski, Jacek","last_name":"Paczkowski"},{"first_name":"Nikodem","last_name":"Ponikwicki","full_name":"Ponikwicki, Nikodem"}],"abstract":[{"text":"Hydrothermal method enables to synthesize high quality piezoelectric materials. To shorten the reaction time and to get higher quality materials, we propose an ultrasonic irradiation to the solution during the hydrothermal method. We named it ultrasonic assisted hydrothermal method (UAHTM). We have synthesized lead-free piezoelectric material and PZT thin film and the effect of UAHTM have been confirmed. In this study, we tried to improve UAHTM. First, to generate powerful and stable ultrasonic irradiation at high temperature on UAHTM, we developed a new transducer using LiNbO3 single crystal. Second, to prevent contamination to the materials, A Teflon cover on the tip of transducer was attached.","lang":"eng"}],"status":"public","publication":"AIP Conference Proceedings","type":"conference","keyword":["contamination","lead compounds","piezoelectric materials","piezoelectric thin films","piezoelectric transducers","ultrasonic effects"],"language":[{"iso":"eng"}],"_id":"9785","department":[{"_id":"151"}],"user_id":"55222","year":"2012","intvolume":"      1433","page":"569-572","citation":{"apa":"Isobe, G., Ageba, R., Maeda, T., Bornmann, P., Hemsel, T., &#38; Morita, T. (2012). Synthesis of piezoelectric materials by ultrasonic assisted hydrothermal method. In B. B. J. Linde, J. Paczkowski, &#38; N. Ponikwicki (Eds.), <i>AIP Conference Proceedings</i> (Vol. 1433, pp. 569–572). AIP. <a href=\"https://doi.org/10.1063/1.3703251\">https://doi.org/10.1063/1.3703251</a>","short":"G. Isobe, R. Ageba, T. Maeda, P. Bornmann, T. Hemsel, T. Morita, in: B. B. J. Linde, J. Paczkowski, N. Ponikwicki (Eds.), AIP Conference Proceedings, AIP, 2012, pp. 569–572.","mla":"Isobe, Gaku, et al. “Synthesis of Piezoelectric Materials by Ultrasonic Assisted Hydrothermal Method.” <i>AIP Conference Proceedings</i>, edited by Bogumil B. J. Linde et al., vol. 1433, no. 1, AIP, 2012, pp. 569–72, doi:<a href=\"https://doi.org/10.1063/1.3703251\">10.1063/1.3703251</a>.","bibtex":"@inproceedings{Isobe_Ageba_Maeda_Bornmann_Hemsel_Morita_2012, title={Synthesis of piezoelectric materials by ultrasonic assisted hydrothermal method}, volume={1433}, DOI={<a href=\"https://doi.org/10.1063/1.3703251\">10.1063/1.3703251</a>}, number={1}, booktitle={AIP Conference Proceedings}, publisher={AIP}, author={Isobe, Gaku and Ageba, Ryo and Maeda, Takafumi and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, editor={B. J. Linde, Bogumil and Paczkowski, Jacek and Ponikwicki, NikodemEditors}, year={2012}, pages={569–572} }","ama":"Isobe G, Ageba R, Maeda T, Bornmann P, Hemsel T, Morita T. Synthesis of piezoelectric materials by ultrasonic assisted hydrothermal method. In: B. J. Linde B, Paczkowski J, Ponikwicki N, eds. <i>AIP Conference Proceedings</i>. Vol 1433. AIP; 2012:569-572. doi:<a href=\"https://doi.org/10.1063/1.3703251\">10.1063/1.3703251</a>","ieee":"G. Isobe, R. Ageba, T. Maeda, P. Bornmann, T. Hemsel, and T. Morita, “Synthesis of piezoelectric materials by ultrasonic assisted hydrothermal method,” in <i>AIP Conference Proceedings</i>, 2012, vol. 1433, no. 1, pp. 569–572.","chicago":"Isobe, Gaku, Ryo Ageba, Takafumi Maeda, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “Synthesis of Piezoelectric Materials by Ultrasonic Assisted Hydrothermal Method.” In <i>AIP Conference Proceedings</i>, edited by Bogumil B. J. Linde, Jacek Paczkowski, and Nikodem Ponikwicki, 1433:569–72. AIP, 2012. <a href=\"https://doi.org/10.1063/1.3703251\">https://doi.org/10.1063/1.3703251</a>."},"quality_controlled":"1","issue":"1","title":"Synthesis of piezoelectric materials by ultrasonic assisted hydrothermal method","doi":"10.1063/1.3703251","date_updated":"2022-01-06T07:04:20Z","publisher":"AIP","volume":1433,"date_created":"2019-05-13T13:21:56Z","author":[{"first_name":"Gaku","full_name":"Isobe, Gaku","last_name":"Isobe"},{"last_name":"Ageba","full_name":"Ageba, Ryo","first_name":"Ryo"},{"first_name":"Takafumi","full_name":"Maeda, Takafumi","last_name":"Maeda"},{"first_name":"Peter","last_name":"Bornmann","full_name":"Bornmann, Peter"},{"id":"210","full_name":"Hemsel, Tobias","last_name":"Hemsel","first_name":"Tobias"},{"last_name":"Morita","full_name":"Morita, Takeshi","first_name":"Takeshi"}]},{"department":[{"_id":"151"}],"user_id":"55222","_id":"9786","language":[{"iso":"eng"}],"keyword":["self-optimizing systems","dependability","probabilistic planning","energy management"],"publication":"Journal of Robotics and Mechatronics","type":"journal_article","status":"public","abstract":[{"text":"Self-optimizing mechatronic systems are a new class of technical systems. On the one hand, new challenges regarding dependability arise from their additional complexity and adaptivity. On the other hand, their abilities enable new concepts and methods to improve the dependability of mechatronic systems. This paper introduces a multi-level dependability concept for selfoptimizing mechatronic systems and shows how probabilistic planning can be used to improve the availability and reliability of systems in the operating phase. The general idea to improve the availability of autonomous systems by applying probabilistic planning methods to avoid energy shortages is exemplified on the example of an innovative railway vehicle.","lang":"eng"}],"volume":24,"date_created":"2019-05-13T13:23:45Z","author":[{"first_name":"Benjamin","last_name":"Klöpper","full_name":"Klöpper, Benjamin"},{"last_name":"Sondermann-Wölke","full_name":"Sondermann-Wölke, Christoph","first_name":"Christoph"},{"first_name":"Christoph","last_name":"Romaus","full_name":"Romaus, Christoph"}],"date_updated":"2022-01-06T07:04:20Z","title":"Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous Railway Vehicle","issue":"1","quality_controlled":"1","page":"5-15","intvolume":"        24","citation":{"mla":"Klöpper, Benjamin, et al. “Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous Railway Vehicle.” <i>Journal of Robotics and Mechatronics</i>, vol. 24, no. 1, 2012, pp. 5–15.","bibtex":"@article{Klöpper_Sondermann-Wölke_Romaus_2012, title={Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous Railway Vehicle}, volume={24}, number={1}, journal={Journal of Robotics and Mechatronics}, author={Klöpper, Benjamin and Sondermann-Wölke, Christoph and Romaus, Christoph}, year={2012}, pages={5–15} }","short":"B. Klöpper, C. Sondermann-Wölke, C. Romaus, Journal of Robotics and Mechatronics 24 (2012) 5–15.","apa":"Klöpper, B., Sondermann-Wölke, C., &#38; Romaus, C. (2012). Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous Railway Vehicle. <i>Journal of Robotics and Mechatronics</i>, <i>24</i>(1), 5–15.","chicago":"Klöpper, Benjamin, Christoph Sondermann-Wölke, and Christoph Romaus. “Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous Railway Vehicle.” <i>Journal of Robotics and Mechatronics</i> 24, no. 1 (2012): 5–15.","ieee":"B. Klöpper, C. Sondermann-Wölke, and C. Romaus, “Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous Railway Vehicle,” <i>Journal of Robotics and Mechatronics</i>, vol. 24, no. 1, pp. 5–15, 2012.","ama":"Klöpper B, Sondermann-Wölke C, Romaus C. Probabilistic Planning for Predictive Condition Monitoring and Adaptation Within the Self-Optimizing Energy Management of an Autonomous Railway Vehicle. <i>Journal of Robotics and Mechatronics</i>. 2012;24(1):5-15."},"year":"2012"},{"place":"Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen","year":"2012","citation":{"chicago":"Kohl, Sergej, Walter Sextro, and Armin Zuber. “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung Basierend Auf Einer Neuen Auslegungstheorie.” In <i>8. Tag Des Fahrwerks, Aachen, 2012</i>, 38–60. Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen, 2012.","ieee":"S. Kohl, W. Sextro, and A. Zuber, “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie,” in <i>8. Tag des Fahrwerks, Aachen, 2012</i>, 2012, pp. 38–60.","ama":"Kohl S, Sextro W, Zuber A. Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie. In: <i>8. Tag Des Fahrwerks, Aachen, 2012</i>. Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen; 2012:38-60.","apa":"Kohl, S., Sextro, W., &#38; Zuber, A. (2012). Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie. In <i>8. Tag des Fahrwerks, Aachen, 2012</i> (pp. 38–60). Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen.","mla":"Kohl, Sergej, et al. “Benteler Vehicle Dynamics -- Fahrdynamikentwicklung Basierend Auf Einer Neuen Auslegungstheorie.” <i>8. Tag Des Fahrwerks, Aachen, 2012</i>, 2012, pp. 38–60.","bibtex":"@inproceedings{Kohl_Sextro_Zuber_2012, place={Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen}, title={Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie}, booktitle={8. Tag des Fahrwerks, Aachen, 2012}, author={Kohl, Sergej and Sextro, Walter and Zuber, Armin}, year={2012}, pages={38–60} }","short":"S. Kohl, W. Sextro, A. Zuber, in: 8. Tag Des Fahrwerks, Aachen, 2012, Institut für Kraftfahrzeuge, RWTH Aachen University in Aachen, 2012, pp. 38–60."},"page":"38-60","title":"Benteler Vehicle Dynamics -- Fahrdynamikentwicklung basierend auf einer neuen Auslegungstheorie","date_updated":"2022-01-06T07:04:20Z","date_created":"2019-05-13T13:25:59Z","author":[{"last_name":"Kohl","full_name":"Kohl, Sergej","first_name":"Sergej"},{"full_name":"Sextro, Walter","id":"21220","last_name":"Sextro","first_name":"Walter"},{"last_name":"Zuber","full_name":"Zuber, Armin","first_name":"Armin"}],"status":"public","popular_science":"1","type":"conference","publication":"8. Tag des Fahrwerks, Aachen, 2012","language":[{"iso":"eng"}],"_id":"9787","user_id":"55222","department":[{"_id":"151"}]},{"status":"public","abstract":[{"lang":"eng","text":"A hydrothermal method utilizes a crystallization process in the solution so that the pure and high-quality powders can be realized. Sintering from the hydrothermal KNbO3 and NaNbO3 powders, a high-dense lead-free piezoelectric (K,Na)NbO3 ceramics could be obtained (density: 98.8\\%). Concerning about the g33 constant, high value as large as commercial PZT ceramics was measured. Therefore, the hydrothermal (K,Na)NbO3 ceramics is usable for the sensors and the energy harvesting devices. To demonstrate the (K,Na)NbO3 ceramics, a hydrophone sensor was fabricated and evaluated."}],"publication":"Ultrasonics Symposium (IUS), 2012 IEEE International","type":"conference","language":[{"iso":"eng"}],"keyword":["crystallisation","hydrophones","piezoceramics","potassium compounds","powder technology","powders","sensors","sintering","sodium compounds","(K0.48Na0.52)NbO3","KNbO3 powder","NaNbO3 powder","crystallization","energy harvesting devices","g33 constant","hydrophone sensor","hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics","hydrothermal method","piezoelectric applications","sintering","Materials","Transducers"],"department":[{"_id":"151"}],"user_id":"55222","_id":"9788","page":"194-195","citation":{"ieee":"T. Maeda, P. Bornmann, T. Hemsel, and T. Morita, “Piezoelectric applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics,” in <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 2012, pp. 194–195.","chicago":"Maeda, Takafumi, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “Piezoelectric Applications of Hydrothermal Lead-Free (K0.48Na0.52)NbO3 Ceramics.” In <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 194–95, 2012. <a href=\"https://doi.org/10.1109/ULTSYM.2012.0048\">https://doi.org/10.1109/ULTSYM.2012.0048</a>.","ama":"Maeda T, Bornmann P, Hemsel T, Morita T. Piezoelectric applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics. In: <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>. ; 2012:194-195. doi:<a href=\"https://doi.org/10.1109/ULTSYM.2012.0048\">10.1109/ULTSYM.2012.0048</a>","apa":"Maeda, T., Bornmann, P., Hemsel, T., &#38; Morita, T. (2012). Piezoelectric applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics. In <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i> (pp. 194–195). <a href=\"https://doi.org/10.1109/ULTSYM.2012.0048\">https://doi.org/10.1109/ULTSYM.2012.0048</a>","bibtex":"@inproceedings{Maeda_Bornmann_Hemsel_Morita_2012, title={Piezoelectric applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics}, DOI={<a href=\"https://doi.org/10.1109/ULTSYM.2012.0048\">10.1109/ULTSYM.2012.0048</a>}, booktitle={Ultrasonics Symposium (IUS), 2012 IEEE International}, author={Maeda, Takafumi and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, year={2012}, pages={194–195} }","mla":"Maeda, Takafumi, et al. “Piezoelectric Applications of Hydrothermal Lead-Free (K0.48Na0.52)NbO3 Ceramics.” <i>Ultrasonics Symposium (IUS), 2012 IEEE International</i>, 2012, pp. 194–95, doi:<a href=\"https://doi.org/10.1109/ULTSYM.2012.0048\">10.1109/ULTSYM.2012.0048</a>.","short":"T. Maeda, P. Bornmann, T. Hemsel, T. Morita, in: Ultrasonics Symposium (IUS), 2012 IEEE International, 2012, pp. 194–195."},"year":"2012","quality_controlled":"1","publication_identifier":{"issn":["1948-5719"]},"doi":"10.1109/ULTSYM.2012.0048","title":"Piezoelectric applications of hydrothermal lead-free (K0.48Na0.52)NbO3 ceramics","author":[{"first_name":"Takafumi","full_name":"Maeda, Takafumi","last_name":"Maeda"},{"last_name":"Bornmann","full_name":"Bornmann, Peter","first_name":"Peter"},{"last_name":"Hemsel","full_name":"Hemsel, Tobias","id":"210","first_name":"Tobias"},{"full_name":"Morita, Takeshi","last_name":"Morita","first_name":"Takeshi"}],"date_created":"2019-05-13T13:28:05Z","date_updated":"2022-01-06T07:04:20Z"},{"_id":"9789","department":[{"_id":"151"}],"user_id":"55222","language":[{"iso":"eng"}],"publication":"Japanese Journal of Applied Physics","type":"journal_article","abstract":[{"text":"[$Li_x(Na_0.52K_0.48)_1-x]NbO_3 (0 \\leq x \\leq 0.091)$ ceramics were synthesized using hydrothermal powders and the lithium doping content was controlled to optimize their piezoelectric properties. The raw KNbO$_3$ and NaNbO$_3$ powders were obtained separately by a hydrothermal method and LiNbO$_3$ powders were prepared by milling a commercial LiNbO$_3$ single crystal. These powders were mixed with ethanol at a molar ratio LiNbO$_3$: ($Na_0.52K_0.48$)NbO$_3 = x : 1-x$. The synthesized powders were sintered at 1060--1120 $\\,^{\\circ}$C for 2 h. We succeeded in obtaining highly dense [$Li_x(Na_0.52K_0.48)_1-x]NbO_3$ ceramics using hydrothermal powder. The X-ray diffraction patterns revealed that the crystal phase changed from orthorhombic to tetragonal at around x = 0.06. At this morphotropic phase boundary (MPB), the c/a ratio changed from 1.016 to 1.024 and the highest piezoelectric constant was obtained with the chemical component of [$Li_x(Na_0.52K_0.48)_1-x]NbO_3$. The obtained piezoelectric properties were as follows: $k_33 = 0.51, \\epsilon 33^T/ \\epsilon _0 = 836$ , $c_33^E = 46$ GPa, $d_33 = 203$ pC/N, and $T_c = 482 $\\,^{\\circ}$C$.","lang":"eng"}],"status":"public","date_updated":"2022-01-06T07:04:20Z","publisher":"The Japan Society of Applied Physics","volume":51,"date_created":"2019-05-13T13:29:10Z","author":[{"first_name":"Takafumi","last_name":"Maeda","full_name":"Maeda, Takafumi"},{"first_name":"Tobias","id":"210","full_name":"Hemsel, Tobias","last_name":"Hemsel"},{"last_name":"Morita","full_name":"Morita, Takeshi","first_name":"Takeshi"}],"title":"Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders","doi":"10.1143/JJAP.51.09MD08","quality_controlled":"1","year":"2012","page":"09MD08","intvolume":"        51","citation":{"apa":"Maeda, T., Hemsel, T., &#38; Morita, T. (2012). Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders. <i>Japanese Journal of Applied Physics</i>, <i>51</i>, 09MD08. <a href=\"https://doi.org/10.1143/JJAP.51.09MD08\">https://doi.org/10.1143/JJAP.51.09MD08</a>","bibtex":"@article{Maeda_Hemsel_Morita_2012, title={Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders}, volume={51}, DOI={<a href=\"https://doi.org/10.1143/JJAP.51.09MD08\">10.1143/JJAP.51.09MD08</a>}, journal={Japanese Journal of Applied Physics}, publisher={The Japan Society of Applied Physics}, author={Maeda, Takafumi and Hemsel, Tobias and Morita, Takeshi}, year={2012}, pages={09MD08} }","mla":"Maeda, Takafumi, et al. “Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders.” <i>Japanese Journal of Applied Physics</i>, vol. 51, The Japan Society of Applied Physics, 2012, p. 09MD08, doi:<a href=\"https://doi.org/10.1143/JJAP.51.09MD08\">10.1143/JJAP.51.09MD08</a>.","short":"T. Maeda, T. Hemsel, T. Morita, Japanese Journal of Applied Physics 51 (2012) 09MD08.","ama":"Maeda T, Hemsel T, Morita T. Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders. <i>Japanese Journal of Applied Physics</i>. 2012;51:09MD08. doi:<a href=\"https://doi.org/10.1143/JJAP.51.09MD08\">10.1143/JJAP.51.09MD08</a>","ieee":"T. Maeda, T. Hemsel, and T. Morita, “Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders,” <i>Japanese Journal of Applied Physics</i>, vol. 51, p. 09MD08, 2012.","chicago":"Maeda, Takafumi, Tobias Hemsel, and Takeshi Morita. “Piezoelectric Properties of Li-Doped (K0.48Na0.52)NbO3 Ceramics Synthesized Using Hydrothermally-Derived KNbO3 and NaNbO3 Fine Powders.” <i>Japanese Journal of Applied Physics</i> 51 (2012): 09MD08. <a href=\"https://doi.org/10.1143/JJAP.51.09MD08\">https://doi.org/10.1143/JJAP.51.09MD08</a>."}},{"date_updated":"2022-01-06T07:04:20Z","date_created":"2019-05-13T13:41:34Z","author":[{"first_name":"Christoph","full_name":"Sondermann-Wölke , Christoph","last_name":"Sondermann-Wölke "},{"last_name":"Meyer","full_name":"Meyer, Tobias","first_name":"Tobias"},{"last_name":"Dorociak","full_name":"Dorociak, Rafal","first_name":"Rafal"},{"full_name":"Gausemeier, Jürgen","last_name":"Gausemeier","first_name":"Jürgen"},{"first_name":"Walter","last_name":"Sextro","full_name":"Sextro, Walter","id":"21220"}],"title":"Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution","quality_controlled":"1","year":"2012","place":"Helsinki, Finland","citation":{"ama":"Sondermann-Wölke  C, Meyer T, Dorociak R, Gausemeier J, Sextro W. Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution. In: <i>Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)</i>. Helsinki, Finland; 2012.","ieee":"C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, and W. Sextro, “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution,” in <i>Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)</i>, 2012.","chicago":"Sondermann-Wölke , Christoph, Tobias Meyer, Rafal Dorociak, Jürgen Gausemeier, and Walter Sextro. “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System Based on Its Principle Solution.” In <i>Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)</i>. Helsinki, Finland, 2012.","apa":"Sondermann-Wölke , C., Meyer, T., Dorociak, R., Gausemeier, J., &#38; Sextro, W. (2012). Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution. In <i>Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)</i>. Helsinki, Finland.","bibtex":"@inproceedings{Sondermann-Wölke _Meyer_Dorociak_Gausemeier_Sextro_2012, place={Helsinki, Finland}, title={Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System based on its Principle Solution}, booktitle={Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)}, author={Sondermann-Wölke , Christoph and Meyer, Tobias and Dorociak, Rafal and Gausemeier, Jürgen and Sextro, Walter}, year={2012} }","mla":"Sondermann-Wölke , Christoph, et al. “Conceptual Design of Advanced Condition Monitoring for a Self-Optimizing System Based on Its Principle Solution.” <i>Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)</i>, 2012.","short":"C. Sondermann-Wölke , T. Meyer, R. Dorociak, J. Gausemeier, W. Sextro, in: Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012), Helsinki, Finland, 2012."},"_id":"9791","department":[{"_id":"151"}],"user_id":"55222","keyword":["Mechatronic Systems","Principle Solution","Condition Monitoring","Conceptual Design"],"language":[{"iso":"eng"}],"publication":"Proceedings of the 11th International Probabilistic Safety Assessment and Management Conference (PSAM11) and The Annual European Safety and Reliability Conference (ESREL2012)","type":"conference","abstract":[{"text":"The rapid development of communication and information technology opens up fascinating perspectives, which go far beyond the state of the art in mechatronics: mechatronic systems with inherent partial intelligence. These so called self-optimizing systems adapt their objectives and behavior autonomously and flexibly to changing operating conditions. On the one hand, securing the dependability of such systems is challenging due to their complexity and non-deterministic behavior. On the other hand, self-optimization can be used to increase the dependability of the system during its operation. However, it has to be ensured, that the self-optimization works dependable itself. To cope with these challenges, the multi-level dependability concept was developed. It enables predictive condition monitoring, influences the objectives of the system and determines suitable means to improve the system's dependability during its operation. In this contribution we introduce a procedure for the conceptual design of an advanced condition monitoring based on the system's principle solution. The principle solution describes the principal operation mode of the system and its desired behavior. It is modeled using the specification technique for the domain-spanning description of the principle solution of a self-optimizing system and consists of a coherent system of eight partial models (e.g. requirements, active structure, system of objectives, behavior, etc.). The partial models are analyzed separately in order to derive the components of the multi-level dependability concept. In particular, the reliability analysis of the partial model active structure is performed to identify the system elements to be monitored and parameters to be measured. The principle solution is extended accordingly: e.g. with system elements required for the realization of the dependability concept. The advantages of the method are shown on the self-optimizing guidance module of a railroad vehicle.","lang":"eng"}],"status":"public"},{"type":"journal_article","publication":"ACTUATOR 2012 Conference Proceedings","status":"public","abstract":[{"lang":"eng","text":"Piezoelectric inertia motors, also known as ``stick-slip-drives'', use the inertia of a body to drive it by means of a friction contact in small steps. While these steps normally involve stiction and sliding, the motors can also operate in ``slip-slip'' mode without any phase of static friction. In this contribution, a one degree of freedom model of an inertia motor driven by an ideal actuator is analysed. Start-up and constant velocity operation of the motor are investigated and appropriate quantities to compare ``stick-slip'' and ``slip-slip'' operation are determined. Different aspects such as velocity, uniformity of motion, load capacity, robustness, efficiency, and wear are considered. The analysis allows both modes to be applied advantageously in different applications and can widen the field of application of piezoelectric inertia motors. Motor designers are enabled to choose the appropriate mode of operation and the best drive parameters for their individual applications."}],"user_id":"55222","department":[{"_id":"151"}],"_id":"9806","language":[{"iso":"eng"}],"keyword":["Piezoelectric Inertia Motors","Drive Signals","Stick-slip","Slip-slip"],"quality_controlled":"1","citation":{"short":"M. Hunstig, T. Hemsel, W. Sextro, ACTUATOR 2012 Conference Proceedings (2012) 761–764.","mla":"Hunstig, Matthias, et al. “Analysis of Different Operation Modes for Inertia Motors.” <i>ACTUATOR 2012 Conference Proceedings</i>, 2012, pp. 761–64.","bibtex":"@article{Hunstig_Hemsel_Sextro_2012, title={Analysis of different operation modes for inertia motors}, journal={ACTUATOR 2012 Conference Proceedings}, author={Hunstig, Matthias and Hemsel, Tobias and Sextro, Walter}, year={2012}, pages={761–764} }","apa":"Hunstig, M., Hemsel, T., &#38; Sextro, W. (2012). Analysis of different operation modes for inertia motors. <i>ACTUATOR 2012 Conference Proceedings</i>, 761–764.","ieee":"M. Hunstig, T. Hemsel, and W. Sextro, “Analysis of different operation modes for inertia motors,” <i>ACTUATOR 2012 Conference Proceedings</i>, pp. 761–764, 2012.","chicago":"Hunstig, Matthias, Tobias Hemsel, and Walter Sextro. “Analysis of Different Operation Modes for Inertia Motors.” <i>ACTUATOR 2012 Conference Proceedings</i>, 2012, 761–64.","ama":"Hunstig M, Hemsel T, Sextro W. Analysis of different operation modes for inertia motors. <i>ACTUATOR 2012 Conference Proceedings</i>. 2012:761-764."},"page":"761-764","year":"2012","date_created":"2019-05-13T14:11:37Z","author":[{"last_name":"Hunstig","full_name":"Hunstig, Matthias","first_name":"Matthias"},{"last_name":"Hemsel","id":"210","full_name":"Hemsel, Tobias","first_name":"Tobias"},{"last_name":"Sextro","full_name":"Sextro, Walter","id":"21220","first_name":"Walter"}],"date_updated":"2022-01-06T07:04:21Z","title":"Analysis of different operation modes for inertia motors"},{"type":"conference","publication":"Presented as part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)","status":"public","user_id":"83504","_id":"15888","extern":"1","language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-931971-95-9"]},"citation":{"ieee":"J. Somorovsky, A. Mayer, J. Schwenk, M. Kampmann, and M. Jensen, “On Breaking SAML: Be Whoever You Want to Be,” in <i>Presented as part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)</i>, 2012, pp. 397–412.","chicago":"Somorovsky, Juraj, Andreas Mayer, Jörg Schwenk, Marco Kampmann, and Meiko Jensen. “On Breaking SAML: Be Whoever You Want to Be.” In <i>Presented as Part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)</i>, 397–412. Bellevue, WA: {USENIX}, 2012.","ama":"Somorovsky J, Mayer A, Schwenk J, Kampmann M, Jensen M. On Breaking SAML: Be Whoever You Want to Be. In: <i>Presented as Part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)</i>. Bellevue, WA: {USENIX}; 2012:397-412.","bibtex":"@inproceedings{Somorovsky_Mayer_Schwenk_Kampmann_Jensen_2012, place={Bellevue, WA}, title={On Breaking SAML: Be Whoever You Want to Be}, booktitle={Presented as part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)}, publisher={{USENIX}}, author={Somorovsky, Juraj and Mayer, Andreas and Schwenk, Jörg and Kampmann, Marco and Jensen, Meiko}, year={2012}, pages={397–412} }","short":"J. Somorovsky, A. Mayer, J. Schwenk, M. Kampmann, M. Jensen, in: Presented as Part of the 21st {USENIX} Security Symposium ({USENIX} Security 12), {USENIX}, Bellevue, WA, 2012, pp. 397–412.","mla":"Somorovsky, Juraj, et al. “On Breaking SAML: Be Whoever You Want to Be.” <i>Presented as Part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)</i>, {USENIX}, 2012, pp. 397–412.","apa":"Somorovsky, J., Mayer, A., Schwenk, J., Kampmann, M., &#38; Jensen, M. (2012). On Breaking SAML: Be Whoever You Want to Be. In <i>Presented as part of the 21st {USENIX} Security Symposium ({USENIX} Security 12)</i> (pp. 397–412). Bellevue, WA: {USENIX}."},"page":"397-412","place":"Bellevue, WA","year":"2012","author":[{"orcid":"0000-0002-3593-7720","last_name":"Somorovsky","id":"83504","full_name":"Somorovsky, Juraj","first_name":"Juraj"},{"full_name":"Mayer, Andreas","last_name":"Mayer","first_name":"Andreas"},{"last_name":"Schwenk","full_name":"Schwenk, Jörg","first_name":"Jörg"},{"full_name":"Kampmann, Marco","last_name":"Kampmann","first_name":"Marco"},{"first_name":"Meiko","full_name":"Jensen, Meiko","last_name":"Jensen"}],"date_created":"2020-02-15T09:25:51Z","oa":"1","publisher":"{USENIX}","date_updated":"2022-01-06T06:52:39Z","main_file_link":[{"open_access":"1","url":"https://www.usenix.org/conference/usenixsecurity12/technical-sessions/presentation/somorovsky"}],"title":"On Breaking SAML: Be Whoever You Want to Be"},{"publisher":"Universität Paderborn","date_updated":"2022-01-06T06:52:41Z","volume":15,"author":[{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"},{"full_name":"Marten, Thorsten","id":"338","last_name":"Marten","first_name":"Thorsten"},{"first_name":"Dieter","full_name":"Thomas, Dieter","last_name":"Thomas"},{"first_name":"Holger","full_name":"Block, Holger","last_name":"Block"},{"full_name":"Lauter, Christian","last_name":"Lauter","first_name":"Christian"},{"first_name":"Markus","last_name":"Thöne","full_name":"Thöne, Markus"}],"date_created":"2020-02-24T08:31:17Z","title":"Automobilleichtbau mit innovativen Werkstoffen und Prozessen","issue":"15/2012","year":"2012","page":"30-38","intvolume":"        15","citation":{"apa":"Tröster, T., Marten, T., Thomas, D., Block, H., Lauter, C., &#38; Thöne, M. (2012). Automobilleichtbau mit innovativen Werkstoffen und Prozessen. <i>Forschungsforum Paderborn</i>, <i>15</i>(15/2012), 30–38.","bibtex":"@article{Tröster_Marten_Thomas_Block_Lauter_Thöne_2012, title={Automobilleichtbau mit innovativen Werkstoffen und Prozessen}, volume={15}, number={15/2012}, journal={Forschungsforum Paderborn}, publisher={Universität Paderborn}, author={Tröster, Thomas and Marten, Thorsten and Thomas, Dieter and Block, Holger and Lauter, Christian and Thöne, Markus}, year={2012}, pages={30–38} }","mla":"Tröster, Thomas, et al. “Automobilleichtbau mit innovativen Werkstoffen und Prozessen.” <i>Forschungsforum Paderborn</i>, vol. 15, no. 15/2012, Universität Paderborn, 2012, pp. 30–38.","short":"T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, M. Thöne, Forschungsforum Paderborn 15 (2012) 30–38.","ama":"Tröster T, Marten T, Thomas D, Block H, Lauter C, Thöne M. Automobilleichtbau mit innovativen Werkstoffen und Prozessen. <i>Forschungsforum Paderborn</i>. 2012;15(15/2012):30-38.","ieee":"T. Tröster, T. Marten, D. Thomas, H. Block, C. Lauter, and M. Thöne, “Automobilleichtbau mit innovativen Werkstoffen und Prozessen,” <i>Forschungsforum Paderborn</i>, vol. 15, no. 15/2012, pp. 30–38, 2012.","chicago":"Tröster, Thomas, Thorsten Marten, Dieter Thomas, Holger Block, Christian Lauter, and Markus Thöne. “Automobilleichtbau mit innovativen Werkstoffen und Prozessen.” <i>Forschungsforum Paderborn</i> 15, no. 15/2012 (2012): 30–38."},"_id":"15981","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","language":[{"iso":"ger"}],"publication":"Forschungsforum Paderborn","type":"journal_article","status":"public"},{"date_updated":"2022-01-06T06:52:41Z","date_created":"2020-02-24T08:34:12Z","author":[{"first_name":"Christian","full_name":"Lauter, Christian","last_name":"Lauter"},{"first_name":"Simon","full_name":"Werneke, Simon","last_name":"Werneke"},{"full_name":"Siewers, Bernd","last_name":"Siewers","first_name":"Bernd"},{"first_name":"Thomas","full_name":"Tröster, Thomas","id":"553","last_name":"Tröster"}],"title":"Endkonturennahe Fertigung von höchstfesten Hybridbauteilen","doi":"10.1365/s35725-012-0079-2","publication_identifier":{"issn":["1865-4819","2192-8738"]},"publication_status":"published","year":"2012","page":"53-58","citation":{"ieee":"C. Lauter, S. Werneke, B. Siewers, and T. Tröster, “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen,” <i>Lightweight Design</i>, pp. 53–58, 2012.","chicago":"Lauter, Christian, Simon Werneke, Bernd Siewers, and Thomas Tröster. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” <i>Lightweight Design</i>, 2012, 53–58. <a href=\"https://doi.org/10.1365/s35725-012-0079-2\">https://doi.org/10.1365/s35725-012-0079-2</a>.","ama":"Lauter C, Werneke S, Siewers B, Tröster T. Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. <i>Lightweight Design</i>. 2012:53-58. doi:<a href=\"https://doi.org/10.1365/s35725-012-0079-2\">10.1365/s35725-012-0079-2</a>","short":"C. Lauter, S. Werneke, B. Siewers, T. Tröster, Lightweight Design (2012) 53–58.","mla":"Lauter, Christian, et al. “Endkonturennahe Fertigung von höchstfesten Hybridbauteilen.” <i>Lightweight Design</i>, 2012, pp. 53–58, doi:<a href=\"https://doi.org/10.1365/s35725-012-0079-2\">10.1365/s35725-012-0079-2</a>.","bibtex":"@article{Lauter_Werneke_Siewers_Tröster_2012, title={Endkonturennahe Fertigung von höchstfesten Hybridbauteilen}, DOI={<a href=\"https://doi.org/10.1365/s35725-012-0079-2\">10.1365/s35725-012-0079-2</a>}, journal={Lightweight Design}, author={Lauter, Christian and Werneke, Simon and Siewers, Bernd and Tröster, Thomas}, year={2012}, pages={53–58} }","apa":"Lauter, C., Werneke, S., Siewers, B., &#38; Tröster, T. (2012). Endkonturennahe Fertigung von höchstfesten Hybridbauteilen. <i>Lightweight Design</i>, 53–58. <a href=\"https://doi.org/10.1365/s35725-012-0079-2\">https://doi.org/10.1365/s35725-012-0079-2</a>"},"_id":"15983","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","language":[{"iso":"ger"}],"publication":"Lightweight Design","type":"journal_article","status":"public"},{"year":"2012","citation":{"apa":"Reuter, C., Frantz, M., Lauter, C., Block, H., &#38; Tröster, T. (2012). Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. Presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy.","short":"C. Reuter, M. Frantz, C. Lauter, H. Block, T. Tröster, in: 2012.","mla":"Reuter, Corin, et al. <i>Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP</i>. 2012.","bibtex":"@inproceedings{Reuter_Frantz_Lauter_Block_Tröster_2012, title={Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP}, author={Reuter, Corin and Frantz, Meike and Lauter, Christian and Block, Holger and Tröster, Thomas}, year={2012} }","ama":"Reuter C, Frantz M, Lauter C, Block H, Tröster T. Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP. In: ; 2012.","ieee":"C. Reuter, M. Frantz, C. Lauter, H. Block, and T. Tröster, “Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP,” presented at the 1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS), Turin, Italy, 2012.","chicago":"Reuter, Corin, Meike Frantz, Christian Lauter, Holger Block, and Thomas Tröster. “Simulation and Testing of Hybrid Structures Consisting of Press-Hardened Steel and CFRP,” 2012."},"date_updated":"2022-01-06T06:52:41Z","author":[{"full_name":"Reuter, Corin","last_name":"Reuter","first_name":"Corin"},{"full_name":"Frantz, Meike","last_name":"Frantz","first_name":"Meike"},{"first_name":"Christian","full_name":"Lauter, Christian","last_name":"Lauter"},{"last_name":"Block","full_name":"Block, Holger","first_name":"Holger"},{"last_name":"Tröster","full_name":"Tröster, Thomas","id":"553","first_name":"Thomas"}],"date_created":"2020-02-24T08:48:14Z","title":"Simulation and testing of hybrid structures consisting of press-hardened steel and CFRP","conference":{"location":"Turin, Italy","end_date":"2012-06-20","start_date":"2012-06-18","name":"1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures (ICNMMCS)"},"type":"conference","status":"public","_id":"15985","project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","language":[{"iso":"eng"}]},{"status":"public","type":"conference","language":[{"iso":"eng"}],"_id":"15987","project":[{"name":"Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","year":"2012","citation":{"bibtex":"@inproceedings{Lauter_Frantz_Kohler_Tröster_2012, title={Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements}, author={Lauter, Christian and Frantz, Meike and Kohler, J. P. and Tröster, Thomas}, year={2012} }","short":"C. Lauter, M. Frantz, J.P. Kohler, T. Tröster, in: 2012.","mla":"Lauter, Christian, et al. <i>Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements</i>. 2012.","apa":"Lauter, C., Frantz, M., Kohler, J. P., &#38; Tröster, T. (2012). Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy.","ama":"Lauter C, Frantz M, Kohler JP, Tröster T. Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.","ieee":"C. Lauter, M. Frantz, J. P. Kohler, and T. Tröster, “Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th European Conference on Composite Materials (ECCM15), Venice, Italy, 2012.","chicago":"Lauter, Christian, Meike Frantz, J. P. Kohler, and Thomas Tröster. “Crash Tests of Hybrid Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012."},"title":"Crash tests of hybrid structures consisting of sheet metal and local CFRP reinforcements","conference":{"end_date":"2012-06-28","location":"Venice, Italy","name":"15th European Conference on Composite Materials (ECCM15)","start_date":"2012-06-24"},"date_updated":"2022-01-06T06:52:41Z","date_created":"2020-02-24T08:58:53Z","author":[{"full_name":"Lauter, Christian","last_name":"Lauter","first_name":"Christian"},{"first_name":"Meike","last_name":"Frantz","full_name":"Frantz, Meike"},{"full_name":"Kohler, J. P.","last_name":"Kohler","first_name":"J. P."},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"}]},{"user_id":"72008","date_created":"2020-02-24T09:01:31Z","author":[{"first_name":"Christian","full_name":"Lauter, Christian","last_name":"Lauter"},{"full_name":"Sarrazin, M.","last_name":"Sarrazin","first_name":"M."},{"last_name":"Tröster","id":"553","full_name":"Tröster, Thomas","first_name":"Thomas"}],"department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"date_updated":"2022-01-06T06:52:41Z","_id":"15988","conference":{"name":"1st International Conference of the International Journal of Structural Integrity (IJSI)","start_date":"2012-06-25","end_date":"2012-06-28","location":"Porto, Portugal"},"language":[{"iso":"eng"}],"title":"Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics","type":"conference","citation":{"ama":"Lauter C, Sarrazin M, Tröster T. Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. In: ; 2012.","chicago":"Lauter, Christian, M. Sarrazin, and Thomas Tröster. “Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics,” 2012.","ieee":"C. Lauter, M. Sarrazin, and T. Tröster, “Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics,” presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal, 2012.","apa":"Lauter, C., Sarrazin, M., &#38; Tröster, T. (2012). Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics. Presented at the 1st International Conference of the International Journal of Structural Integrity (IJSI), Porto, Portugal.","mla":"Lauter, Christian, et al. <i>Joining Technologies for Hybrid Materials Consisting of Sheet Metal and Carbon Fibre Reinforced Plastics</i>. 2012.","bibtex":"@inproceedings{Lauter_Sarrazin_Tröster_2012, title={Joining technologies for hybrid materials consisting of sheet metal and carbon fibre reinforced plastics}, author={Lauter, Christian and Sarrazin, M. and Tröster, Thomas}, year={2012} }","short":"C. Lauter, M. Sarrazin, T. Tröster, in: 2012."},"status":"public","year":"2012"},{"year":"2012","citation":{"ama":"Ickert L, Thomas D, Tröster T, Eckstein L. Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. <i>FAT-Schriftenreihe 244</i>. 2012;(244).","ieee":"L. Ickert, D. Thomas, T. Tröster, and L. Eckstein, “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise,” <i>FAT-Schriftenreihe 244</i>, no. 244, 2012.","chicago":"Ickert, Leif, Dieter Thomas, Thomas Tröster, and Lutz Eckstein. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” <i>FAT-Schriftenreihe 244</i>, no. 244 (2012).","apa":"Ickert, L., Thomas, D., Tröster, T., &#38; Eckstein, L. (2012). Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise. <i>FAT-Schriftenreihe 244</i>, (244).","bibtex":"@article{Ickert_Thomas_Tröster_Eckstein_2012, title={Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise}, number={244}, journal={FAT-Schriftenreihe 244}, publisher={Forschungsvereinigung Automobiltechnik e.V.}, author={Ickert, Leif and Thomas, Dieter and Tröster, Thomas and Eckstein, Lutz}, year={2012} }","short":"L. Ickert, D. Thomas, T. Tröster, L. Eckstein, FAT-Schriftenreihe 244 (2012).","mla":"Ickert, Leif, et al. “Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise.” <i>FAT-Schriftenreihe 244</i>, no. 244, Forschungsvereinigung Automobiltechnik e.V., 2012."},"publication_identifier":{"issn":["2192-7863"]},"issue":"244","title":"Beitrag zum Fortschritt im Automobilleichtbau durch belastungsgerechte Gestaltung und innovative Lösungen für lokale Verstärkungen von Fahrzeugstrukturen in Mischbauweise","publisher":"Forschungsvereinigung Automobiltechnik e.V.","date_updated":"2022-01-06T06:52:41Z","author":[{"full_name":"Ickert, Leif","last_name":"Ickert","first_name":"Leif"},{"full_name":"Thomas, Dieter","last_name":"Thomas","first_name":"Dieter"},{"first_name":"Thomas","last_name":"Tröster","id":"553","full_name":"Tröster, Thomas"},{"first_name":"Lutz","full_name":"Eckstein, Lutz","last_name":"Eckstein"}],"date_created":"2020-02-24T09:10:51Z","status":"public","publication":"FAT-Schriftenreihe 244","type":"journal_article","language":[{"iso":"ger"}],"_id":"15989","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008"},{"year":"2012","citation":{"apa":"Lauter, C., Siewers, B., Zanft, B., &#38; Tröster, T. (2012). Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. Presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto .","short":"C. Lauter, B. Siewers, B. Zanft, T. Tröster, in: 2012.","bibtex":"@inproceedings{Lauter_Siewers_Zanft_Tröster_2012, title={Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements}, author={Lauter, Christian and Siewers, Bernd and Zanft, B. and Tröster, Thomas}, year={2012} }","mla":"Lauter, Christian, et al. <i>Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements</i>. 2012.","ama":"Lauter C, Siewers B, Zanft B, Tröster T. Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements. In: ; 2012.","ieee":"C. Lauter, B. Siewers, B. Zanft, and T. Tröster, “Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements,” presented at the 15th International Conference on Experimental Mechanics (ICEM15), Porto , 2012.","chicago":"Lauter, Christian, Bernd Siewers, B. Zanft, and Thomas Tröster. “Crash Worthiness of Hybrid Pillar Structures Consisting of Sheet Metal and Local CFRP Reinforcements,” 2012."},"date_updated":"2022-01-06T06:52:42Z","date_created":"2020-02-24T10:43:55Z","author":[{"first_name":"Christian","full_name":"Lauter, Christian","last_name":"Lauter"},{"first_name":"Bernd","last_name":"Siewers","full_name":"Siewers, Bernd"},{"full_name":"Zanft, B.","last_name":"Zanft","first_name":"B."},{"first_name":"Thomas","full_name":"Tröster, Thomas","id":"553","last_name":"Tröster"}],"title":"Crash worthiness of hybrid pillar structures consisting of sheet metal and local CFRP reinforcements","conference":{"end_date":"2012-07-27","location":"Porto ","name":"15th International Conference on Experimental Mechanics (ICEM15)","start_date":"2012-07-22"},"type":"conference","status":"public","_id":"16004","user_id":"72008","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"language":[{"iso":"eng"}]},{"type":"conference","status":"public","_id":"16007","user_id":"72008","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"language":[{"iso":"eng"}],"year":"2012","citation":{"short":"M. Thöne, S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.","mla":"Thöne, M., et al. <i>Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V</i>. 2012.","bibtex":"@inproceedings{Thöne_Leuders_Riemer_Tröster_Richard_2012, title={Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V}, author={Thöne, M. and Leuders, S. and Riemer, A. and Tröster, Thomas and Richard, H. A.}, year={2012} }","apa":"Thöne, M., Leuders, S., Riemer, A., Tröster, T., &#38; Richard, H. A. (2012). Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. Presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA.","ama":"Thöne M, Leuders S, Riemer A, Tröster T, Richard HA. Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V. In: ; 2012.","ieee":"M. Thöne, S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V,” presented at the Solid Freeform Fabrication Symposium, Austin, Texas, USA, 2012.","chicago":"Thöne, M., S. Leuders, A. Riemer, Thomas Tröster, and H. A. Richard. “Influence of Heat-Treatment on Selective Laser Melting Products - e.g. Ti6Al4V,” 2012."},"date_updated":"2022-01-06T06:52:42Z","date_created":"2020-02-24T12:00:43Z","author":[{"last_name":"Thöne","full_name":"Thöne, M.","first_name":"M."},{"first_name":"S.","full_name":"Leuders, S.","last_name":"Leuders"},{"first_name":"A.","full_name":"Riemer, A.","last_name":"Riemer"},{"first_name":"Thomas","full_name":"Tröster, Thomas","id":"553","last_name":"Tröster"},{"first_name":"H. A.","last_name":"Richard","full_name":"Richard, H. A."}],"title":"Influence of heat-treatment on Selective Laser Melting products - e.g. Ti6Al4V","conference":{"location":"Austin, Texas, USA","end_date":"2012-08-08","start_date":"2012-08-06","name":"Solid Freeform Fabrication Symposium"}},{"language":[{"iso":"ger"}],"_id":"16008","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"user_id":"72008","status":"public","publication":"DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit","type":"journal_article","title":"Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4","date_updated":"2022-01-06T06:52:42Z","publisher":"Deutscher Verband für Materialforschung und -prüfung e.V.","author":[{"full_name":"Riemer, A.","last_name":"Riemer","first_name":"A."},{"last_name":"Leuders","full_name":"Leuders, S.","first_name":"S."},{"last_name":"Tröster","id":"553","full_name":"Tröster, Thomas","first_name":"Thomas"},{"last_name":"Richard","full_name":"Richard, H. A.","first_name":"H. A."}],"date_created":"2020-02-24T12:15:35Z","year":"2012","citation":{"apa":"Riemer, A., Leuders, S., Tröster, T., &#38; Richard, H. A. (2012). Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. <i>DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>.","short":"A. Riemer, S. Leuders, T. Tröster, H.A. Richard, DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit (2012).","mla":"Riemer, A., et al. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” <i>DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>, Deutscher Verband für Materialforschung und -prüfung e.V., 2012.","bibtex":"@article{Riemer_Leuders_Tröster_Richard_2012, title={Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4}, journal={DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit}, publisher={Deutscher Verband für Materialforschung und -prüfung e.V.}, author={Riemer, A. and Leuders, S. and Tröster, Thomas and Richard, H. A.}, year={2012} }","ieee":"A. Riemer, S. Leuders, T. Tröster, and H. A. Richard, “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4,” <i>DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>, 2012.","chicago":"Riemer, A., S. Leuders, Thomas Tröster, and H. A. Richard. “Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4.” <i>DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>, 2012.","ama":"Riemer A, Leuders S, Tröster T, Richard HA. Untersuchung zyklisch belasteter SLM-Bauteile aus der Titan-Aluminium-Legierung TiAl6V4. <i>DVM-Bericht 139, Werkstoffe und Fügeverfahren - Neue Herausforderungen für die Betriebsfestigkeit</i>. 2012."}},{"type":"conference","status":"public","user_id":"72008","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"_id":"16009","language":[{"iso":"eng"}],"citation":{"apa":"Leuders, S., Riemer, A., Tröster, T., &#38; Richard, H. A. (2012). Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. Presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel.","mla":"Leuders, S., et al. <i>Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement</i>. 2012.","bibtex":"@inproceedings{Leuders_Riemer_Tröster_Richard_2012, title={Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement}, author={Leuders, S. and Riemer, A. and Tröster, Thomas and Richard, H. A.}, year={2012} }","short":"S. Leuders, A. Riemer, T. Tröster, H.A. Richard, in: 2012.","chicago":"Leuders, S., A. Riemer, Thomas Tröster, and H. A. Richard. “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” 2012.","ieee":"S. Leuders, A. Riemer, T. Tröster, and H. A. Richard, “Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement,” presented at the 1st International Conference on Thermo-Mechanically Graded Materials, Kassel, 2012.","ama":"Leuders S, Riemer A, Tröster T, Richard HA. Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement. In: ; 2012."},"year":"2012","author":[{"first_name":"S.","last_name":"Leuders","full_name":"Leuders, S."},{"full_name":"Riemer, A.","last_name":"Riemer","first_name":"A."},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"},{"last_name":"Richard","full_name":"Richard, H. A.","first_name":"H. A."}],"date_created":"2020-02-24T12:25:44Z","date_updated":"2022-01-06T06:52:42Z","conference":{"location":"Kassel","end_date":"2012-10-30","start_date":"2012-10-29","name":"1st International Conference on Thermo-Mechanically Graded Materials"},"title":"Characterization and Comparison of Mechanical Properties of SLM Materials with Regard to Process Cycle Time Improvement"}]