[{"author":[{"full_name":"Adelt, Philipp","last_name":"Adelt","first_name":"Philipp"},{"first_name":"Natascha","full_name":"Esau, Natascha","last_name":"Esau"},{"first_name":"Christian","full_name":"Hölscher, Christian","last_name":"Hölscher"},{"last_name":"Kleinjohann","full_name":"Kleinjohann, Bernd","first_name":"Bernd"},{"last_name":"Kleinjohann","full_name":"Kleinjohann, Lisa","first_name":"Lisa"},{"full_name":"Krüger, Martin","last_name":"Krüger","first_name":"Martin"},{"last_name":"Zimmer","full_name":"Zimmer, Detmar","first_name":"Detmar"}],"date_created":"2021-08-09T07:36:23Z","publisher":"InTech Open Access Publisher","date_updated":"2022-01-06T06:55:47Z","title":"Hybrid Planning for Self-Optimization in Railbound Mechatronic Systems","page":"169 - 194","citation":{"ama":"Adelt P, Esau N, Hölscher C, et al. Hybrid Planning for Self-Optimization in Railbound Mechatronic Systems. In: <i>Intelligent Mechatronics</i>. InTech Open Access Publisher; 2011:169-194.","ieee":"P. Adelt <i>et al.</i>, “Hybrid Planning for Self-Optimization in Railbound Mechatronic Systems,” in <i>Intelligent Mechatronics</i>, InTech Open Access Publisher, 2011, pp. 169–194.","chicago":"Adelt, Philipp, Natascha Esau, Christian Hölscher, Bernd Kleinjohann, Lisa Kleinjohann, Martin Krüger, and Detmar Zimmer. “Hybrid Planning for Self-Optimization in Railbound Mechatronic Systems.” In <i>Intelligent Mechatronics</i>, 169–94. InTech Open Access Publisher, 2011.","short":"P. Adelt, N. Esau, C. Hölscher, B. Kleinjohann, L. Kleinjohann, M. Krüger, D. Zimmer, in: Intelligent Mechatronics, InTech Open Access Publisher, 2011, pp. 169–194.","mla":"Adelt, Philipp, et al. “Hybrid Planning for Self-Optimization in Railbound Mechatronic Systems.” <i>Intelligent Mechatronics</i>, InTech Open Access Publisher, 2011, pp. 169–94.","bibtex":"@inbook{Adelt_Esau_Hölscher_Kleinjohann_Kleinjohann_Krüger_Zimmer_2011, title={Hybrid Planning for Self-Optimization in Railbound Mechatronic Systems}, booktitle={Intelligent Mechatronics}, publisher={InTech Open Access Publisher}, author={Adelt, Philipp and Esau, Natascha and Hölscher, Christian and Kleinjohann, Bernd and Kleinjohann, Lisa and Krüger, Martin and Zimmer, Detmar}, year={2011}, pages={169–194} }","apa":"Adelt, P., Esau, N., Hölscher, C., Kleinjohann, B., Kleinjohann, L., Krüger, M., &#38; Zimmer, D. (2011). Hybrid Planning for Self-Optimization in Railbound Mechatronic Systems. In <i>Intelligent Mechatronics</i> (pp. 169–194). InTech Open Access Publisher."},"year":"2011","department":[{"_id":"153"}],"user_id":"24876","_id":"23189","language":[{"iso":"eng"}],"publication":"Intelligent Mechatronics","type":"book_chapter","status":"public"},{"year":"2011","citation":{"short":"M. Borsig, A. Trächtler, in: 11. Internationale Schienenfahrzeugtagung, 2011.","mla":"Borsig, Michael, and Ansgar Trächtler. “RailCab - Ein Schienenverkehrsmittel Mit Autonomen Einzelfahrzeugen Und Innovativer Spurführungstechnik.” <i>11. Internationale Schienenfahrzeugtagung</i>, 2011.","bibtex":"@inproceedings{Borsig_Trächtler_2011, title={RailCab - ein Schienenverkehrsmittel mit autonomen Einzelfahrzeugen und innovativer Spurführungstechnik}, booktitle={11. Internationale Schienenfahrzeugtagung}, author={Borsig, Michael and Trächtler, Ansgar}, year={2011} }","apa":"Borsig, M., &#38; Trächtler, A. (2011). RailCab - ein Schienenverkehrsmittel mit autonomen Einzelfahrzeugen und innovativer Spurführungstechnik. In <i>11. Internationale Schienenfahrzeugtagung</i>.","ama":"Borsig M, Trächtler A. RailCab - ein Schienenverkehrsmittel mit autonomen Einzelfahrzeugen und innovativer Spurführungstechnik. In: <i>11. Internationale Schienenfahrzeugtagung</i>. ; 2011.","chicago":"Borsig, Michael, and Ansgar Trächtler. “RailCab - Ein Schienenverkehrsmittel Mit Autonomen Einzelfahrzeugen Und Innovativer Spurführungstechnik.” In <i>11. Internationale Schienenfahrzeugtagung</i>, 2011.","ieee":"M. Borsig and A. Trächtler, “RailCab - ein Schienenverkehrsmittel mit autonomen Einzelfahrzeugen und innovativer Spurführungstechnik,” in <i>11. Internationale Schienenfahrzeugtagung</i>, 2011."},"title":"RailCab - ein Schienenverkehrsmittel mit autonomen Einzelfahrzeugen und innovativer Spurführungstechnik","date_updated":"2022-01-06T06:55:47Z","author":[{"first_name":"Michael","full_name":"Borsig, Michael","last_name":"Borsig"},{"last_name":"Trächtler","full_name":"Trächtler, Ansgar","id":"552","first_name":"Ansgar"}],"date_created":"2021-08-09T07:36:24Z","status":"public","type":"conference","publication":"11. Internationale Schienenfahrzeugtagung","language":[{"iso":"eng"}],"_id":"23190","user_id":"24876","department":[{"_id":"153"}]},{"language":[{"iso":"eng"}],"title":"Fully Active Suspension System for a Military All-Terrain Transport Vehicle","user_id":"24876","author":[{"first_name":"Alexander","last_name":"Weisske","full_name":"Weisske, Alexander"},{"first_name":"Viktor","full_name":"Gel, Viktor","last_name":"Gel"},{"full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler","first_name":"Ansgar"}],"date_created":"2021-08-09T07:36:25Z","department":[{"_id":"153"}],"date_updated":"2022-01-06T06:55:47Z","_id":"23191","citation":{"short":"A. Weisske, V. Gel, A. Trächtler, 27th Applied Vehicle Technology Panel (2011).","bibtex":"@article{Weisske_Gel_Trächtler_2011, title={Fully Active Suspension System for a Military All-Terrain Transport Vehicle}, journal={27th Applied Vehicle Technology Panel}, author={Weisske, Alexander and Gel, Viktor and Trächtler, Ansgar}, year={2011} }","mla":"Weisske, Alexander, et al. “Fully Active Suspension System for a Military All-Terrain Transport Vehicle.” <i>27th Applied Vehicle Technology Panel</i>, 2011.","apa":"Weisske, A., Gel, V., &#38; Trächtler, A. (2011). Fully Active Suspension System for a Military All-Terrain Transport Vehicle. <i>27th Applied Vehicle Technology Panel</i>.","ama":"Weisske A, Gel V, Trächtler A. Fully Active Suspension System for a Military All-Terrain Transport Vehicle. <i>27th Applied Vehicle Technology Panel</i>. 2011.","chicago":"Weisske, Alexander, Viktor Gel, and Ansgar Trächtler. “Fully Active Suspension System for a Military All-Terrain Transport Vehicle.” <i>27th Applied Vehicle Technology Panel</i>, 2011.","ieee":"A. Weisske, V. Gel, and A. Trächtler, “Fully Active Suspension System for a Military All-Terrain Transport Vehicle,” <i>27th Applied Vehicle Technology Panel</i>, 2011."},"status":"public","year":"2011","type":"journal_article","publication":"27th Applied Vehicle Technology Panel"},{"type":"dissertation","status":"public","_id":"23193","department":[{"_id":"153"},{"_id":"26"}],"series_title":"Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn","user_id":"5786","language":[{"iso":"ger"}],"year":"2011","intvolume":"       288","citation":{"chicago":"Harchenko, Jewgenij. <i>Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe</i>. Vol. 288. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2011.","ieee":"J. Harchenko, <i>Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe</i>, vol. 288. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2011.","ama":"Harchenko J. <i>Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe</i>. Vol 288. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn; 2011.","apa":"Harchenko, J. (2011). <i>Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe</i> (Vol. 288). Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn.","bibtex":"@book{Harchenko_2011, series={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, title={Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe}, volume={288}, publisher={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn}, author={Harchenko, Jewgenij}, year={2011}, collection={Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn} }","short":"J. Harchenko, Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe, Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2011.","mla":"Harchenko, Jewgenij. <i>Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe</i>. Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn, 2011."},"date_updated":"2022-01-06T06:55:47Z","publisher":"Verlagsschriftenreihe des Heinz Nixdorf Instituts, Paderborn","volume":288,"author":[{"last_name":"Harchenko","full_name":"Harchenko, Jewgenij","first_name":"Jewgenij"}],"date_created":"2021-08-09T07:36:27Z","title":"Mechatronischer Entwurf eines neuartigen aktiven Fahrzeugfederungssystems für PKW unter Verwendung einer reversierbaren Flügelzellenpumpe"},{"year":"2011","status":"public","citation":{"bibtex":"@inproceedings{Sondermann-Wölke_Sextro_Reinold_Trächtler_2011, title={Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs}, booktitle={Technische Zuverlässigkeit TTZ}, author={Sondermann-Wölke, Christoph and Sextro, Walter and Reinold, Peter and Trächtler, Ansgar}, year={2011} }","mla":"Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” <i>Technische Zuverlässigkeit TTZ</i>, 2011.","short":"C. Sondermann-Wölke, W. Sextro, P. Reinold, A. Trächtler, in: Technische Zuverlässigkeit TTZ, 2011.","apa":"Sondermann-Wölke, C., Sextro, W., Reinold, P., &#38; Trächtler, A. (2011). Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In <i>Technische Zuverlässigkeit TTZ</i>.","ieee":"C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in <i>Technische Zuverlässigkeit TTZ</i>, 2011.","chicago":"Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In <i>Technische Zuverlässigkeit TTZ</i>, 2011.","ama":"Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: <i>Technische Zuverlässigkeit TTZ</i>. ; 2011."},"publication":"Technische Zuverlässigkeit TTZ","type":"conference","title":"Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs","language":[{"iso":"eng"}],"_id":"23194","date_updated":"2022-01-06T06:55:47Z","department":[{"_id":"153"}],"author":[{"first_name":"Christoph","last_name":"Sondermann-Wölke","full_name":"Sondermann-Wölke, Christoph"},{"first_name":"Walter","last_name":"Sextro","id":"21220","full_name":"Sextro, Walter"},{"last_name":"Reinold","full_name":"Reinold, Peter","first_name":"Peter"},{"first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler"}],"user_id":"24876","date_created":"2021-08-09T07:36:28Z"},{"type":"journal_article","publication":"27th Applied Vehicle Technology Panel","status":"public","user_id":"24876","department":[{"_id":"153"}],"_id":"23196","language":[{"iso":"eng"}],"citation":{"chicago":"Gense, Alexander, Igor Illg, and Ansgar Trächtler. “Model-Based Design of the Controlled Suspension Of Tracked Vehicles.” <i>27th Applied Vehicle Technology Panel</i>, 2011.","ieee":"A. Gense, I. Illg, and A. Trächtler, “Model-Based Design of the Controlled Suspension Of Tracked Vehicles,” <i>27th Applied Vehicle Technology Panel</i>, 2011.","ama":"Gense A, Illg I, Trächtler A. Model-Based Design of the Controlled Suspension Of Tracked Vehicles. <i>27th Applied Vehicle Technology Panel</i>. 2011.","short":"A. Gense, I. Illg, A. Trächtler, 27th Applied Vehicle Technology Panel (2011).","bibtex":"@article{Gense_Illg_Trächtler_2011, title={Model-Based Design of the Controlled Suspension Of Tracked Vehicles}, journal={27th Applied Vehicle Technology Panel}, author={Gense, Alexander and Illg, Igor and Trächtler, Ansgar}, year={2011} }","mla":"Gense, Alexander, et al. “Model-Based Design of the Controlled Suspension Of Tracked Vehicles.” <i>27th Applied Vehicle Technology Panel</i>, 2011.","apa":"Gense, A., Illg, I., &#38; Trächtler, A. (2011). Model-Based Design of the Controlled Suspension Of Tracked Vehicles. <i>27th Applied Vehicle Technology Panel</i>."},"year":"2011","author":[{"full_name":"Gense, Alexander","last_name":"Gense","first_name":"Alexander"},{"first_name":"Igor","full_name":"Illg, Igor","last_name":"Illg"},{"full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler","first_name":"Ansgar"}],"date_created":"2021-08-09T07:36:31Z","date_updated":"2022-01-06T06:55:47Z","title":"Model-Based Design of the Controlled Suspension Of Tracked Vehicles"},{"date_created":"2021-08-09T07:36:32Z","author":[{"first_name":"Julia","last_name":"Timmermann","full_name":"Timmermann, Julia","id":"15402"}],"date_updated":"2022-01-06T06:55:47Z","title":"Optimale Steuerung durch DMOC mit Anwendungen am Doppelpendel","citation":{"bibtex":"@article{Timmermann_2011, title={Optimale Steuerung durch DMOC mit Anwendungen am Doppelpendel}, journal={Vortrag beim 45. Regelungstechnischen Kolloquium in Boppard}, author={Timmermann, Julia}, year={2011} }","mla":"Timmermann, Julia. “Optimale Steuerung Durch DMOC Mit Anwendungen Am Doppelpendel.” <i>Vortrag Beim 45. Regelungstechnischen Kolloquium in Boppard</i>, 2011.","short":"J. Timmermann, Vortrag Beim 45. Regelungstechnischen Kolloquium in Boppard (2011).","apa":"Timmermann, J. (2011). Optimale Steuerung durch DMOC mit Anwendungen am Doppelpendel. <i>Vortrag Beim 45. Regelungstechnischen Kolloquium in Boppard</i>.","chicago":"Timmermann, Julia. “Optimale Steuerung Durch DMOC Mit Anwendungen Am Doppelpendel.” <i>Vortrag Beim 45. Regelungstechnischen Kolloquium in Boppard</i>, 2011.","ieee":"J. Timmermann, “Optimale Steuerung durch DMOC mit Anwendungen am Doppelpendel,” <i>Vortrag beim 45. Regelungstechnischen Kolloquium in Boppard</i>, 2011.","ama":"Timmermann J. Optimale Steuerung durch DMOC mit Anwendungen am Doppelpendel. <i>Vortrag beim 45 Regelungstechnischen Kolloquium in Boppard</i>. 2011."},"year":"2011","department":[{"_id":"153"}],"user_id":"24876","_id":"23197","language":[{"iso":"eng"}],"publication":"Vortrag beim 45. Regelungstechnischen Kolloquium in Boppard","type":"journal_article","status":"public"},{"_id":"23198","department":[{"_id":"153"}],"user_id":"24876","language":[{"iso":"eng"}],"publication":"ECMI 2010 Proceedings","type":"conference","status":"public","date_updated":"2022-01-06T06:55:47Z","author":[{"last_name":"Dellnitz","full_name":"Dellnitz, Michael","first_name":"Michael"},{"first_name":"Florian","last_name":"Dignath","full_name":"Dignath, Florian"},{"first_name":"Kathrin","last_name":"Flaßkamp","full_name":"Flaßkamp, Kathrin"},{"first_name":"Mirko","full_name":"Hessel-von Molo, Mirko","last_name":"Hessel-von Molo"},{"first_name":"Martin","full_name":"Krüger, Martin","last_name":"Krüger"},{"first_name":"Robert","last_name":"Timmermann","full_name":"Timmermann, Robert"},{"full_name":"Zheng, Qinghua","last_name":"Zheng","first_name":"Qinghua"}],"date_created":"2021-08-09T07:36:33Z","title":"Modelling and analysis of the nonlinear dynamics of the Transrapid and its guideway ","year":"2011","place":"Wuppertal","citation":{"short":"M. Dellnitz, F. Dignath, K. Flaßkamp, M. Hessel-von Molo, M. Krüger, R. Timmermann, Q. Zheng, in: ECMI 2010 Proceedings, Wuppertal, 2011.","bibtex":"@inproceedings{Dellnitz_Dignath_Flaßkamp_Hessel-von Molo_Krüger_Timmermann_Zheng_2011, place={Wuppertal}, title={Modelling and analysis of the nonlinear dynamics of the Transrapid and its guideway }, booktitle={ECMI 2010 Proceedings}, author={Dellnitz, Michael and Dignath, Florian and Flaßkamp, Kathrin and Hessel-von Molo, Mirko and Krüger, Martin and Timmermann, Robert and Zheng, Qinghua}, year={2011} }","mla":"Dellnitz, Michael, et al. “Modelling and Analysis of the Nonlinear Dynamics of the Transrapid and Its Guideway .” <i>ECMI 2010 Proceedings</i>, 2011.","apa":"Dellnitz, M., Dignath, F., Flaßkamp, K., Hessel-von Molo, M., Krüger, M., Timmermann, R., &#38; Zheng, Q. (2011). Modelling and analysis of the nonlinear dynamics of the Transrapid and its guideway . In <i>ECMI 2010 Proceedings</i>. Wuppertal.","ama":"Dellnitz M, Dignath F, Flaßkamp K, et al. Modelling and analysis of the nonlinear dynamics of the Transrapid and its guideway . In: <i>ECMI 2010 Proceedings</i>. Wuppertal; 2011.","chicago":"Dellnitz, Michael, Florian Dignath, Kathrin Flaßkamp, Mirko Hessel-von Molo, Martin Krüger, Robert Timmermann, and Qinghua Zheng. “Modelling and Analysis of the Nonlinear Dynamics of the Transrapid and Its Guideway .” In <i>ECMI 2010 Proceedings</i>. Wuppertal, 2011.","ieee":"M. Dellnitz <i>et al.</i>, “Modelling and analysis of the nonlinear dynamics of the Transrapid and its guideway ,” in <i>ECMI 2010 Proceedings</i>, 2011."}},{"has_accepted_license":"1","page":"17-20","citation":{"ama":"von Detten M. Towards Systematic, Comprehensive Trace Generation for Behavioral Pattern Detection through Symbolic Execution. In: <i>Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE)</i>. ; 2011:17-20. doi:<a href=\"https://doi.org/10.1145/2024569.2024573\">10.1145/2024569.2024573</a>","chicago":"Detten, Markus von. “Towards Systematic, Comprehensive Trace Generation for Behavioral Pattern Detection through Symbolic Execution.” In <i>Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE)</i>, 17–20, 2011. <a href=\"https://doi.org/10.1145/2024569.2024573\">https://doi.org/10.1145/2024569.2024573</a>.","ieee":"M. von Detten, “Towards Systematic, Comprehensive Trace Generation for Behavioral Pattern Detection through Symbolic Execution,” in <i>Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE)</i>, 2011, pp. 17–20.","apa":"von Detten, M. (2011). Towards Systematic, Comprehensive Trace Generation for Behavioral Pattern Detection through Symbolic Execution. In <i>Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE)</i> (pp. 17–20). <a href=\"https://doi.org/10.1145/2024569.2024573\">https://doi.org/10.1145/2024569.2024573</a>","mla":"von Detten, Markus. “Towards Systematic, Comprehensive Trace Generation for Behavioral Pattern Detection through Symbolic Execution.” <i>Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE)</i>, 2011, pp. 17–20, doi:<a href=\"https://doi.org/10.1145/2024569.2024573\">10.1145/2024569.2024573</a>.","bibtex":"@inproceedings{von Detten_2011, title={Towards Systematic, Comprehensive Trace Generation for Behavioral Pattern Detection through Symbolic Execution}, DOI={<a href=\"https://doi.org/10.1145/2024569.2024573\">10.1145/2024569.2024573</a>}, booktitle={Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE)}, author={von Detten, Markus}, year={2011}, pages={17–20} }","short":"M. von Detten, in: Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE), 2011, pp. 17–20."},"year":"2011","date_created":"2017-10-17T12:42:57Z","author":[{"last_name":"von Detten","full_name":"von Detten, Markus","first_name":"Markus"}],"date_updated":"2022-01-06T07:03:05Z","doi":"10.1145/2024569.2024573","title":"Towards Systematic, Comprehensive Trace Generation for Behavioral Pattern Detection through Symbolic Execution","publication":"Proceedings of the 10th ACM SIGPLAN/SIGSOFT Workshop on Program Analysis for Software Tools and Engineering (PASTE)","type":"conference","status":"public","file":[{"content_type":"application/pdf","success":1,"relation":"main_file","date_updated":"2018-03-14T14:08:32Z","date_created":"2018-03-14T14:08:32Z","creator":"florida","file_size":121611,"file_id":"1229","access_level":"closed","file_name":"644-paste09s-vonDetten_01.pdf"}],"abstract":[{"lang":"eng","text":"In reverse engineering, dynamic pattern detection is accomplished by collecting execution traces and comparing them to expected behavioral patterns. The traces are collected by manually executing the program in question and therefore represent only part of all relevant program behavior. This can lead to false conclusions about the detected patterns. In this paper, we propose to generate all relevant program traces by using symbolic execution. In order to reduce the created trace data, we allow to limit the trace collection to a user-selectable subset of the statically detected pattern candidates."}],"user_id":"15504","_id":"644","project":[{"_id":"1","name":"SFB 901"},{"_id":"9","name":"SFB 901 - Subprojekt B1"},{"name":"SFB 901 - Project Area B","_id":"3"}],"file_date_updated":"2018-03-14T14:08:32Z","ddc":["040"]},{"date_updated":"2022-01-06T07:01:19Z","date_created":"2018-10-12T08:37:03Z","author":[{"first_name":"Felix","last_name":"Müller-Wienbergen","full_name":"Müller-Wienbergen, Felix"},{"first_name":"Oliver","last_name":"Müller","full_name":"Müller, Oliver","id":"72849"},{"last_name":"Seidel","full_name":"Seidel, Stefan","first_name":"Stefan"},{"first_name":"Jörg","last_name":"Becker","full_name":"Becker, Jörg"}],"title":"Leaving the Beaten Tracks in Creative Work – A Design Theory for Systems that Support Convergent and Divergent Thinking","doi":"10.1016/S0006-3495(00)76637-9","publication_identifier":{"issn":["15369323"],"isbn":["1536-9323"]},"issue":"11","year":"2011","citation":{"mla":"Müller-Wienbergen, Felix, et al. “Leaving the Beaten Tracks in Creative Work – A Design Theory for Systems That Support Convergent and Divergent Thinking.” <i>Journal of the Association for Information Systems</i>, no. 11, 2011, pp. 714--740, doi:<a href=\"https://doi.org/10.1016/S0006-3495(00)76637-9\">10.1016/S0006-3495(00)76637-9</a>.","bibtex":"@article{Müller-Wienbergen_Müller_Seidel_Becker_2011, title={Leaving the Beaten Tracks in Creative Work – A Design Theory for Systems that Support Convergent and Divergent Thinking}, DOI={<a href=\"https://doi.org/10.1016/S0006-3495(00)76637-9\">10.1016/S0006-3495(00)76637-9</a>}, number={11}, journal={Journal of the Association for Information Systems}, author={Müller-Wienbergen, Felix and Müller, Oliver and Seidel, Stefan and Becker, Jörg}, year={2011}, pages={714--740} }","short":"F. Müller-Wienbergen, O. Müller, S. Seidel, J. Becker, Journal of the Association for Information Systems (2011) 714--740.","apa":"Müller-Wienbergen, F., Müller, O., Seidel, S., &#38; Becker, J. (2011). Leaving the Beaten Tracks in Creative Work – A Design Theory for Systems that Support Convergent and Divergent Thinking. <i>Journal of the Association for Information Systems</i>, (11), 714--740. <a href=\"https://doi.org/10.1016/S0006-3495(00)76637-9\">https://doi.org/10.1016/S0006-3495(00)76637-9</a>","ama":"Müller-Wienbergen F, Müller O, Seidel S, Becker J. Leaving the Beaten Tracks in Creative Work – A Design Theory for Systems that Support Convergent and Divergent Thinking. <i>Journal of the Association for Information Systems</i>. 2011;(11):714--740. doi:<a href=\"https://doi.org/10.1016/S0006-3495(00)76637-9\">10.1016/S0006-3495(00)76637-9</a>","ieee":"F. Müller-Wienbergen, O. Müller, S. Seidel, and J. Becker, “Leaving the Beaten Tracks in Creative Work – A Design Theory for Systems that Support Convergent and Divergent Thinking,” <i>Journal of the Association for Information Systems</i>, no. 11, pp. 714--740, 2011.","chicago":"Müller-Wienbergen, Felix, Oliver Müller, Stefan Seidel, and Jörg Becker. “Leaving the Beaten Tracks in Creative Work – A Design Theory for Systems That Support Convergent and Divergent Thinking.” <i>Journal of the Association for Information Systems</i>, no. 11 (2011): 714--740. <a href=\"https://doi.org/10.1016/S0006-3495(00)76637-9\">https://doi.org/10.1016/S0006-3495(00)76637-9</a>."},"page":"714--740","_id":"4708","user_id":"72849","keyword":["Creativity","Creativity Support Systems","convergent thinking","design theory","divergent thinking"],"language":[{"iso":"eng"}],"extern":"1","type":"journal_article","publication":"Journal of the Association for Information Systems","status":"public"},{"page":"1808-1812","citation":{"short":"T. Hemsel, B. Fu, Y. Jing, X. Fu, Key Engineering Materials 474–476 (2011) 1808–1812.","bibtex":"@article{Hemsel_Fu_Jing_Fu_2011, title={Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm}, volume={474–476}, DOI={<a href=\"https://doi.org/10.4028/www.scientific.net/KEM.474-476.1808\">10.4028/www.scientific.net/KEM.474-476.1808</a>}, journal={Key Engineering Materials}, publisher={Trans Tech Publ}, author={Hemsel, Tobias and Fu, Bo and Jing, Yi and Fu, Xuan}, year={2011}, pages={1808–1812} }","mla":"Hemsel, Tobias, et al. “Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm.” <i>Key Engineering Materials</i>, vol. 474–476, Trans Tech Publ, 2011, pp. 1808–12, doi:<a href=\"https://doi.org/10.4028/www.scientific.net/KEM.474-476.1808\">10.4028/www.scientific.net/KEM.474-476.1808</a>.","apa":"Hemsel, T., Fu, B., Jing, Y., &#38; Fu, X. (2011). Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm. <i>Key Engineering Materials</i>, <i>474</i>–<i>476</i>, 1808–1812. <a href=\"https://doi.org/10.4028/www.scientific.net/KEM.474-476.1808\">https://doi.org/10.4028/www.scientific.net/KEM.474-476.1808</a>","ama":"Hemsel T, Fu B, Jing Y, Fu X. Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm. <i>Key Engineering Materials</i>. 2011;474-476:1808-1812. doi:<a href=\"https://doi.org/10.4028/www.scientific.net/KEM.474-476.1808\">10.4028/www.scientific.net/KEM.474-476.1808</a>","chicago":"Hemsel, Tobias, Bo Fu, Yi Jing, and Xuan Fu. “Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm.” <i>Key Engineering Materials</i> 474–476 (2011): 1808–12. <a href=\"https://doi.org/10.4028/www.scientific.net/KEM.474-476.1808\">https://doi.org/10.4028/www.scientific.net/KEM.474-476.1808</a>.","ieee":"T. Hemsel, B. Fu, Y. Jing, and X. Fu, “Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm,” <i>Key Engineering Materials</i>, vol. 474–476, pp. 1808–1812, 2011."},"year":"2011","quality_controlled":"1","doi":"10.4028/www.scientific.net/KEM.474-476.1808","title":"Multi-Objective Optimization of a Piezoelectric Sandwich Ultrasonic Transducer by Using Elitist Non-Dominated Sorting Genetic Algorithm","volume":"474 - 476","author":[{"id":"210","full_name":"Hemsel, Tobias","last_name":"Hemsel","first_name":"Tobias"},{"first_name":"Bo","full_name":"Fu, Bo","last_name":"Fu"},{"last_name":"Jing","full_name":"Jing, Yi","first_name":"Yi"},{"last_name":"Fu","full_name":"Fu, Xuan","first_name":"Xuan"}],"date_created":"2019-05-13T10:54:42Z","publisher":"Trans Tech Publ","date_updated":"2022-01-06T07:04:19Z","status":"public","abstract":[{"text":"The multi-objective optimal design of a piezoelectric sandwich ultrasonic transducer is studied. The maximum vibration amplitude and the minimum electrical input power are considered as optimization objectives. Design variables involve continuous variables (dimensions of the transducer) and discrete variables (material types). Based on analytical models, the optimal design is formulated as a constrained multi-objective optimization problem. The optimization problem is then solved by using the elitist non-dominated sorting genetic algorithm (NSGA-II) and Pareto-optimal designs are obtained. The optimized results are analyzed and the preferred design is proposed. The optimization procedure presented in this contribution can be applied in multi-objective optimization problems of other piezoelectric transducers.","lang":"eng"}],"publication":"Key Engineering Materials","type":"journal_article","language":[{"iso":"eng"}],"department":[{"_id":"151"}],"user_id":"55222","_id":"9765"},{"language":[{"iso":"eng"}],"keyword":["dielectric polarisation","piezoceramics","piezoelectric actuators"],"department":[{"_id":"151"}],"user_id":"55222","_id":"9767","status":"public","abstract":[{"text":"The paper presents the results of numerical and experimental investigation of cylindrical piezoelectric actuator used for achieving independent three degrees of freedom oscillations of the contact point. The design of actuator based on a hollow piezoelectric cylinder mounted on a metal rod. The piezoceramic cylinder has a radial polarization and special configuration of the electrodes that cover inner and outer surface of the cylinder. The main advantage of actuator's design is that solid metallic rod operates as a part of inner electrode of the cylinder and a stator of actuator. The geometry of piezoelectric actuator was adopted to reach resonance of oscillations for the first longitudinal mode and the third flexural mode at same frequency. The actuator is designed to move positioned object through contact point which is located on the top of the rod. The optimal topology of electrodes was found to achieve longitudinal and flexural oscillations of the actuator in two perpendicular planes. Three degrees of freedom of the positioning object can be achieved and control of the system can be implemented by applying different excitation schemes and regimes. The numerical simulation and experimental study of piezoelectric actuator was performed. Impedance of actuator was analyzed under different excitation regimes. The results of numerical modeling and experimental study were compared. Recommendations for the further development of this type of actuator are given.","lang":"eng"}],"publication":"AIP Conference Proceedings","type":"journal_article","doi":"10.1063/1.3703277","title":"Multi-DOF cylindrical piezoelectric actuator with radial polarization","volume":1433,"author":[{"first_name":"Raimundas","last_name":"Lucinskis","full_name":"Lucinskis, Raimundas"},{"last_name":"Mazeika","full_name":"Mazeika, Dalius","first_name":"Dalius"},{"id":"210","full_name":"Hemsel, Tobias","last_name":"Hemsel","first_name":"Tobias"},{"first_name":"Ramutis","full_name":"Bansevicius, Ramutis","last_name":"Bansevicius"}],"date_created":"2019-05-13T10:56:30Z","date_updated":"2022-01-06T07:04:19Z","publisher":"AIP","page":"693-696","intvolume":"      1433","citation":{"ama":"Lucinskis R, Mazeika D, Hemsel T, Bansevicius R. Multi-DOF cylindrical piezoelectric actuator with radial polarization. <i>AIP Conference Proceedings</i>. 2011;1433(1):693-696. doi:<a href=\"https://doi.org/10.1063/1.3703277\">10.1063/1.3703277</a>","chicago":"Lucinskis, Raimundas, Dalius Mazeika, Tobias Hemsel, and Ramutis Bansevicius. “Multi-DOF Cylindrical Piezoelectric Actuator with Radial Polarization.” <i>AIP Conference Proceedings</i> 1433, no. 1 (2011): 693–96. <a href=\"https://doi.org/10.1063/1.3703277\">https://doi.org/10.1063/1.3703277</a>.","ieee":"R. Lucinskis, D. Mazeika, T. Hemsel, and R. Bansevicius, “Multi-DOF cylindrical piezoelectric actuator with radial polarization,” <i>AIP Conference Proceedings</i>, vol. 1433, no. 1, pp. 693–696, 2011.","mla":"Lucinskis, Raimundas, et al. “Multi-DOF Cylindrical Piezoelectric Actuator with Radial Polarization.” <i>AIP Conference Proceedings</i>, vol. 1433, no. 1, AIP, 2011, pp. 693–96, doi:<a href=\"https://doi.org/10.1063/1.3703277\">10.1063/1.3703277</a>.","bibtex":"@article{Lucinskis_Mazeika_Hemsel_Bansevicius_2011, title={Multi-DOF cylindrical piezoelectric actuator with radial polarization}, volume={1433}, DOI={<a href=\"https://doi.org/10.1063/1.3703277\">10.1063/1.3703277</a>}, number={1}, journal={AIP Conference Proceedings}, publisher={AIP}, author={Lucinskis, Raimundas and Mazeika, Dalius and Hemsel, Tobias and Bansevicius, Ramutis}, year={2011}, pages={693–696} }","short":"R. Lucinskis, D. Mazeika, T. Hemsel, R. Bansevicius, AIP Conference Proceedings 1433 (2011) 693–696.","apa":"Lucinskis, R., Mazeika, D., Hemsel, T., &#38; Bansevicius, R. (2011). Multi-DOF cylindrical piezoelectric actuator with radial polarization. <i>AIP Conference Proceedings</i>, <i>1433</i>(1), 693–696. <a href=\"https://doi.org/10.1063/1.3703277\">https://doi.org/10.1063/1.3703277</a>"},"year":"2011","issue":"1","quality_controlled":"1"},{"language":[{"iso":"eng"}],"department":[{"_id":"151"}],"user_id":"55222","_id":"9768","status":"public","publication":"25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte","type":"conference","title":"Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies","date_created":"2019-05-13T10:57:24Z","author":[{"first_name":"Oleg","last_name":"Lurie","full_name":"Lurie, Oleg"},{"first_name":"Ivan","last_name":"Kromov","full_name":"Kromov, Ivan"},{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar"},{"first_name":"Christoph","last_name":"Sondermann-Wölke","full_name":"Sondermann-Wölke, Christoph"},{"first_name":"Walter","full_name":"Sextro, Walter","id":"21220","last_name":"Sextro"}],"date_updated":"2022-01-06T07:04:19Z","page":"99-110","citation":{"chicago":"Lurie, Oleg, Ivan Kromov, Ansgar Trächtler, Christoph Sondermann-Wölke, and Walter Sextro. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” In <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>, 99–110. Leonberg, 2011.","ieee":"O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, and W. Sextro, “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies,” in <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte</i>, 2011, pp. 99–110.","ama":"Lurie O, Kromov I, Trächtler A, Sondermann-Wölke C, Sextro W. Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies. In: <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>. Leonberg; 2011:99-110.","mla":"Lurie, Oleg, et al. “Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies.” <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>, 2011, pp. 99–110.","bibtex":"@inproceedings{Lurie_Kromov_Trächtler_Sondermann-Wölke_Sextro_2011, place={Leonberg}, title={Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies}, booktitle={25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte}, author={Lurie, Oleg and Kromov, Ivan and Trächtler, Ansgar and Sondermann-Wölke, Christoph and Sextro, Walter}, year={2011}, pages={99–110} }","short":"O. Lurie, I. Kromov, A. Trächtler, C. Sondermann-Wölke, W. Sextro, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 99–110.","apa":"Lurie, O., Kromov, I., Trächtler, A., Sondermann-Wölke, C., &#38; Sextro, W. (2011). Dependability Analysis of the Degradation Behavior of Mechatronics Systems with Different Operating Strategies. In <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte</i> (pp. 99–110). Leonberg."},"year":"2011","place":"Leonberg"},{"year":"2011","intvolume":"        50","page":"07HC01","citation":{"ama":"Maeda T, Hemsel T, Morita T. Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics. <i>Japanese Journal of Applied Physics</i>. 2011;50:07HC01.","chicago":"Maeda, Takafumi, Tobias Hemsel, and Takeshi Morita. “Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics.” <i>Japanese Journal of Applied Physics</i> 50 (2011): 07HC01.","ieee":"T. Maeda, T. Hemsel, and T. Morita, “Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics,” <i>Japanese Journal of Applied Physics</i>, vol. 50, p. 07HC01, 2011.","apa":"Maeda, T., Hemsel, T., &#38; Morita, T. (2011). Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics. <i>Japanese Journal of Applied Physics</i>, <i>50</i>, 07HC01.","short":"T. Maeda, T. Hemsel, T. Morita, Japanese Journal of Applied Physics 50 (2011) 07HC01.","bibtex":"@article{Maeda_Hemsel_Morita_2011, title={Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics}, volume={50}, journal={Japanese Journal of Applied Physics}, publisher={The Japan Society of Applied Physics}, author={Maeda, Takafumi and Hemsel, Tobias and Morita, Takeshi}, year={2011}, pages={07HC01} }","mla":"Maeda, Takafumi, et al. “Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics.” <i>Japanese Journal of Applied Physics</i>, vol. 50, The Japan Society of Applied Physics, 2011, p. 07HC01."},"quality_controlled":"1","title":"Improved Process for Hydrothermal Lead-Free Piezoelectric Powders and Performances of Sintered (K0.48Na0.52)NbO3 Ceramics","publisher":"The Japan Society of Applied Physics","date_updated":"2022-01-06T07:04:19Z","volume":50,"author":[{"full_name":"Maeda, Takafumi","last_name":"Maeda","first_name":"Takafumi"},{"last_name":"Hemsel","id":"210","full_name":"Hemsel, Tobias","first_name":"Tobias"},{"first_name":"Takeshi","last_name":"Morita","full_name":"Morita, Takeshi"}],"date_created":"2019-05-13T11:00:23Z","abstract":[{"text":"In this study, we report some improvements in a hydrothermal method for lead-free piezoelectric powders and the performance of the sintered (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$ ceramics. To increase the obtained powder weight per source solution volume, the hydrothermal reaction conditions were modified. This improvement is important for mass production; however, it resulted in a larger particle size dispersion. Therefore, we examined to introduced the ball milling process that is useful for dense (K$_{0.48}$Na$_{0.52}$)NbO$_{3}$ ceramics. When a large amount of powder was obtained, it took a long time to eliminate the residual alkaline ions in the hydrothermal powders by a washing process. Therefore, a neutralization was conducted in the powder washing process. Using this powder, a solid solution of (K,Na)NbO$_{3}$ceramics was synthesized. The relative density was successfully increased. Concerning the electrical properties, the relative permittivity was improved, and the piezoelectric constant d$_{33}$ was also increased from 114 to 130 pC/N.","lang":"eng"}],"status":"public","publication":"Japanese Journal of Applied Physics","type":"journal_article","language":[{"iso":"eng"}],"_id":"9769","department":[{"_id":"151"}],"user_id":"55222"},{"publisher":"IEEE Computer Society","date_updated":"2022-01-06T07:04:19Z","author":[{"first_name":"Claudia","full_name":"Priesterjahn, Claudia","last_name":"Priesterjahn"},{"last_name":"Sondermann-Wölke","full_name":"Sondermann-Wölke, Christoph","first_name":"Christoph"},{"first_name":"Mathias","last_name":"Tichy","full_name":"Tichy, Mathias"},{"last_name":"Hölscher","full_name":"Hölscher, Christian","first_name":"Christian"}],"date_created":"2019-05-13T11:01:13Z","title":"Component-based Hazard Analysis for Mechatronic Systems","quality_controlled":"1","year":"2011","place":"Newport Beach, USA (USA)","citation":{"ama":"Priesterjahn C, Sondermann-Wölke C, Tichy M, Hölscher C. Component-based Hazard Analysis for Mechatronic Systems. In: <i>Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC)</i>. Newport Beach, USA (USA): IEEE Computer Society; 2011.","chicago":"Priesterjahn, Claudia, Christoph Sondermann-Wölke, Mathias Tichy, and Christian Hölscher. “Component-Based Hazard Analysis for Mechatronic Systems.” In <i>Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC)</i>. Newport Beach, USA (USA): IEEE Computer Society, 2011.","ieee":"C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, and C. Hölscher, “Component-based Hazard Analysis for Mechatronic Systems,” in <i>Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC)</i>, 2011.","apa":"Priesterjahn, C., Sondermann-Wölke, C., Tichy, M., &#38; Hölscher, C. (2011). Component-based Hazard Analysis for Mechatronic Systems. In <i>Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC)</i>. Newport Beach, USA (USA): IEEE Computer Society.","short":"C. Priesterjahn, C. Sondermann-Wölke, M. Tichy, C. Hölscher, in: Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC), IEEE Computer Society, Newport Beach, USA (USA), 2011.","bibtex":"@inproceedings{Priesterjahn_Sondermann-Wölke_Tichy_Hölscher_2011, place={Newport Beach, USA (USA)}, title={Component-based Hazard Analysis for Mechatronic Systems}, booktitle={Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC)}, publisher={IEEE Computer Society}, author={Priesterjahn, Claudia and Sondermann-Wölke, Christoph and Tichy, Mathias and Hölscher, Christian}, year={2011} }","mla":"Priesterjahn, Claudia, et al. “Component-Based Hazard Analysis for Mechatronic Systems.” <i>Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-Oriented Real-Time Distributed Computing (ISORC)</i>, IEEE Computer Society, 2011."},"_id":"9770","user_id":"55222","department":[{"_id":"151"}],"language":[{"iso":"eng"}],"type":"conference","publication":"Proc. of the 2nd IEEE International Workshop MoBE-RTES at the 14th IEEE International Symposium on Object/Component/Service-oriented Real-time Distributed Computing (ISORC)","abstract":[{"lang":"eng","text":"One cannot image today's life without mechatronic systems, which have to be developed in a joint effort by teams of mechanical engineers, electrical engineers, control engineers and software engineers. Often these systems are applied in safety critical environments like in cars or aircrafts. This requires systems that function correctly and do not cause hazardous situations. However, random errors due to wear or external influences cannot be completely excluded. Consequently, we have to perform a hazard analysis for the system. Further, the union of four disciplines in one system requires the development and analysis of the system as a whole. We present a component-based hazard analysis that considers the entire mechatronic system including hardware, i.e. mechanical and electrical components, and software components. Our approach considers the physical properties of different types of flow in mechatronic systems. We have identified reusable patterns for the failure behavior which can be generated automatically. This reduces the effort for the developer. As cycles, e.g. control cycles, are an internal part of every mechatronic system our approach is able to handle cycles. The presented approach has been applied to a real-life case study."}],"status":"public"},{"citation":{"apa":"Sondermann-Wölke, C., Sextro, W., Reinold, P., &#38; Trächtler, A. (2011). Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte</i> (pp. 291–302). Leonberg.","short":"C. Sondermann-Wölke, W. Sextro, P. Reinold, A. Trächtler, in: 25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte, Leonberg, 2011, pp. 291–302.","mla":"Sondermann-Wölke, Christoph, et al. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>, 2011, pp. 291–302.","bibtex":"@inproceedings{Sondermann-Wölke_Sextro_Reinold_Trächtler_2011, place={Leonberg}, title={Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs}, booktitle={25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte}, author={Sondermann-Wölke, Christoph and Sextro, Walter and Reinold, Peter and Trächtler, Ansgar}, year={2011}, pages={291–302} }","ama":"Sondermann-Wölke C, Sextro W, Reinold P, Trächtler A. Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs. In: <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>. Leonberg; 2011:291-302.","chicago":"Sondermann-Wölke, Christoph, Walter Sextro, Peter Reinold, and Ansgar Trächtler. “Zuverlässigkeitsorientierte Mehrzieloptimierung Zur Aktorrekonfiguration Eines X-by-Wire-Fahrzeugs.” In <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung Und Betrieb Zuverlässiger Produkte</i>, 291–302. Leonberg, 2011.","ieee":"C. Sondermann-Wölke, W. Sextro, P. Reinold, and A. Trächtler, “Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs,” in <i>25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte</i>, 2011, pp. 291–302."},"page":"291-302","place":"Leonberg","year":"2011","author":[{"last_name":"Sondermann-Wölke","full_name":"Sondermann-Wölke, Christoph","first_name":"Christoph"},{"first_name":"Walter","last_name":"Sextro","id":"21220","full_name":"Sextro, Walter"},{"last_name":"Reinold","full_name":"Reinold, Peter","first_name":"Peter"},{"first_name":"Ansgar","last_name":"Trächtler","full_name":"Trächtler, Ansgar"}],"date_created":"2019-05-13T11:04:04Z","date_updated":"2022-01-06T07:04:19Z","title":"Zuverlässigkeitsorientierte Mehrzieloptimierung zur Aktorrekonfiguration eines X-by-wire-Fahrzeugs","type":"conference","publication":"25. Tagung Technische Zuverlässigkeit (TTZ 2011) - Entwicklung und Betrieb zuverlässiger Produkte","status":"public","abstract":[{"text":"Dieser Beitrag stellt ein Konzept vor, welches die Methode der Mehrzieloptimierung mit einer Online-Bewertung des aktuellen Systemzustands kombiniert. Dieses erlaubt Maßnahmen zur Zuverlässigkeitssteigerung abzuleiten. Das Konzept wird auf ein X-by-wire-Fahrzeug mit Einzelradaktorik angewandt. Dabei steht zunächst die Beeinflussung der Ziele der Mehrzieloptimierung zugunsten der Zuverlässigkeit des Systems im Vordergrund. In Simulationen wird gezeigt, dass über die Wahl und Gewichtung der Zielfunktionen die Quer- und Längskräfte an den Rädern vorteilhaft verteilt werden können. \r\n\r\nIn this contribution a concept is illustrated, which combines the multi-objective optimization technique with an online assessment of the current system state. This allows deriving measures to increase the reliability of the system. The concept is applied to an X-by-wire vehicle with single-wheel actuators. The emphasis is here mostly on the influence of the objectives of the multiobjective optimization for the benefit of the reliability of the system. It is demonstrated in simulations, that the lateral and longitudinal forces at the wheels can be distributed advantageously by the selection of the suitable objective functions and the appropriate weights.","lang":"eng"}],"user_id":"55222","department":[{"_id":"151"}],"_id":"9771","language":[{"iso":"eng"}]},{"publication_identifier":{"issn":["0043-1648"]},"page":"2 - 12","intvolume":"       271","citation":{"ieee":"C. Tomberger, P. Dietmaier, W. Sextro, and K. Six, “Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature,” <i>Wear</i>, vol. 271, pp. 2–12, 2011.","chicago":"Tomberger, Christoph, Peter Dietmaier, Walter Sextro, and Klaus Six. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” <i>Wear</i> 271 (2011): 2–12. <a href=\"https://doi.org/10.1016/j.wear.2010.10.025\">https://doi.org/10.1016/j.wear.2010.10.025</a>.","ama":"Tomberger C, Dietmaier P, Sextro W, Six K. Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature. <i>Wear</i>. 2011;271:2-12. doi:<a href=\"https://doi.org/10.1016/j.wear.2010.10.025\">10.1016/j.wear.2010.10.025</a>","apa":"Tomberger, C., Dietmaier, P., Sextro, W., &#38; Six, K. (2011). Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature. <i>Wear</i>, <i>271</i>, 2–12. <a href=\"https://doi.org/10.1016/j.wear.2010.10.025\">https://doi.org/10.1016/j.wear.2010.10.025</a>","short":"C. Tomberger, P. Dietmaier, W. Sextro, K. Six, Wear 271 (2011) 2–12.","mla":"Tomberger, Christoph, et al. “Friction in Wheel--Rail Contact: A Model Comprising Interfacial Fluids, Surface Roughness and Temperature.” <i>Wear</i>, vol. 271, 2011, pp. 2–12, doi:<a href=\"https://doi.org/10.1016/j.wear.2010.10.025\">10.1016/j.wear.2010.10.025</a>.","bibtex":"@article{Tomberger_Dietmaier_Sextro_Six_2011, title={Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature}, volume={271}, DOI={<a href=\"https://doi.org/10.1016/j.wear.2010.10.025\">10.1016/j.wear.2010.10.025</a>}, journal={Wear}, author={Tomberger, Christoph and Dietmaier, Peter and Sextro, Walter and Six, Klaus}, year={2011}, pages={2–12} }"},"volume":271,"author":[{"full_name":"Tomberger, Christoph","last_name":"Tomberger","first_name":"Christoph"},{"last_name":"Dietmaier","full_name":"Dietmaier, Peter","first_name":"Peter"},{"full_name":"Sextro, Walter","id":"21220","last_name":"Sextro","first_name":"Walter"},{"full_name":"Six, Klaus","last_name":"Six","first_name":"Klaus"}],"date_updated":"2022-01-06T07:04:19Z","doi":"10.1016/j.wear.2010.10.025","type":"journal_article","status":"public","department":[{"_id":"151"}],"user_id":"55222","_id":"9772","quality_controlled":"1","year":"2011","date_created":"2019-05-13T11:08:32Z","title":"Friction in wheel--rail contact: A model comprising interfacial fluids, surface roughness and temperature","publication":"Wear","abstract":[{"lang":"eng","text":"A profound description of friction in wheel--rail contact plays an essential role for optimization of traction control strategies, as input quantity for railway simulations in general and for the estimation of wear and rolling contact fatigue. A multitude of wheel--rail contact models exists, however, traction--creepage curves obtained from measurements show quantitative and qualitative deviations. There are several phenomena which influence the traction--creepage characteristics: Mechanisms resulting from surface roughness, frictional heating or the presence of interfacial fluids can have a dominating influence on friction. In this paper, a new wheel--rail contact model, accounting for these influential parameters, will be presented. The presented model accounts for the interaction of an interfacial fluid model for combined boundary and mixed lubrication of rough surfaces with a wheel--rail contact model that additionally accounts for frictional heating. A quantitative comparison with measurements found in the literature is not conducted, since the exact conditions of the measurements are mostly unknown and parameters can easily be adjusted to fit the measurements. Emphasis is placed on the qualitative behavior of the model with respect to the measurements and good agreement is found. The dependence of the maximum traction coefficient on rolling velocity, surface roughness and normal load is studied under dry and water lubricated conditions."}],"language":[{"iso":"eng"}],"keyword":["Wheel--rail contact","Rolling contact","Friction","Interfacial fluid","Lubrication","Surface roughness","Contact temperature"]},{"type":"journal_article","publication":"Proceedings of Symposium on Ultrasonic Electronics","status":"public","_id":"9877","user_id":"55222","department":[{"_id":"151"}],"language":[{"iso":"eng"}],"quality_controlled":"1","year":"2011","citation":{"ieee":"G. Isobe, P. Bornmann, T. Hemsel, and T. Morita, “High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method,” <i>Proceedings of Symposium on Ultrasonic Electronics</i>, vol. 32, pp. 19–20, 2011.","chicago":"Isobe, Gaku, Peter Bornmann, Tobias Hemsel, and Takeshi Morita. “High Temperature Tolerant Transducer for Ultrasonic Assisted Hydrothermal Method.” <i>Proceedings of Symposium on Ultrasonic Electronics</i> 32 (2011): 19–20.","ama":"Isobe G, Bornmann P, Hemsel T, Morita T. High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method. <i>Proceedings of Symposium on Ultrasonic Electronics</i>. 2011;32:19-20.","apa":"Isobe, G., Bornmann, P., Hemsel, T., &#38; Morita, T. (2011). High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method. <i>Proceedings of Symposium on Ultrasonic Electronics</i>, <i>32</i>, 19–20.","mla":"Isobe, Gaku, et al. “High Temperature Tolerant Transducer for Ultrasonic Assisted Hydrothermal Method.” <i>Proceedings of Symposium on Ultrasonic Electronics</i>, vol. 32, Trans Tech Publ, 2011, pp. 19–20.","short":"G. Isobe, P. Bornmann, T. Hemsel, T. Morita, Proceedings of Symposium on Ultrasonic Electronics 32 (2011) 19–20.","bibtex":"@article{Isobe_Bornmann_Hemsel_Morita_2011, title={High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method}, volume={32}, journal={Proceedings of Symposium on Ultrasonic Electronics}, publisher={Trans Tech Publ}, author={Isobe, Gaku and Bornmann, Peter and Hemsel, Tobias and Morita, Takeshi}, year={2011}, pages={19–20} }"},"intvolume":"        32","page":"19-20","publisher":"Trans Tech Publ","date_updated":"2019-09-16T11:31:38Z","author":[{"first_name":"Gaku","full_name":"Isobe, Gaku","last_name":"Isobe"},{"first_name":"Peter","full_name":"Bornmann, Peter","last_name":"Bornmann"},{"last_name":"Hemsel","id":"210","full_name":"Hemsel, Tobias","first_name":"Tobias"},{"full_name":"Morita, Takeshi","last_name":"Morita","first_name":"Takeshi"}],"date_created":"2019-05-20T13:09:04Z","volume":32,"title":"High temperature tolerant transducer for Ultrasonic Assisted Hydrothermal Method"},{"type":"journal_article","publication":"Economic Analysis and Policy","status":"public","_id":"4157","user_id":"37339","department":[{"_id":"280"},{"_id":"475"}],"extern":"1","publication_status":"published","publication_identifier":{"issn":["0313-5926"]},"issue":"1","year":"2011","citation":{"ama":"Hehenkamp B, Kaarboe O. Paying for Performance in Hospitals. <i>Economic Analysis and Policy</i>. 2011;41(1):49-70. doi:<a href=\"https://doi.org/10.1016/s0313-5926(11)50004-9\">10.1016/s0313-5926(11)50004-9</a>","ieee":"B. Hehenkamp and O. Kaarboe, “Paying for Performance in Hospitals,” <i>Economic Analysis and Policy</i>, vol. 41, no. 1, pp. 49–70, 2011.","chicago":"Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.” <i>Economic Analysis and Policy</i> 41, no. 1 (2011): 49–70. <a href=\"https://doi.org/10.1016/s0313-5926(11)50004-9\">https://doi.org/10.1016/s0313-5926(11)50004-9</a>.","mla":"Hehenkamp, Burkhard, and Oddvar Kaarboe. “Paying for Performance in Hospitals.” <i>Economic Analysis and Policy</i>, vol. 41, no. 1, Elsevier BV, 2011, pp. 49–70, doi:<a href=\"https://doi.org/10.1016/s0313-5926(11)50004-9\">10.1016/s0313-5926(11)50004-9</a>.","bibtex":"@article{Hehenkamp_Kaarboe_2011, title={Paying for Performance in Hospitals}, volume={41}, DOI={<a href=\"https://doi.org/10.1016/s0313-5926(11)50004-9\">10.1016/s0313-5926(11)50004-9</a>}, number={1}, journal={Economic Analysis and Policy}, publisher={Elsevier BV}, author={Hehenkamp, Burkhard and Kaarboe, Oddvar}, year={2011}, pages={49–70} }","short":"B. Hehenkamp, O. Kaarboe, Economic Analysis and Policy 41 (2011) 49–70.","apa":"Hehenkamp, B., &#38; Kaarboe, O. (2011). Paying for Performance in Hospitals. <i>Economic Analysis and Policy</i>, <i>41</i>(1), 49–70. <a href=\"https://doi.org/10.1016/s0313-5926(11)50004-9\">https://doi.org/10.1016/s0313-5926(11)50004-9</a>"},"intvolume":"        41","page":"49-70","publisher":"Elsevier BV","date_updated":"2022-01-06T07:00:26Z","date_created":"2018-08-27T15:08:06Z","author":[{"first_name":"Burkhard","id":"37339","full_name":"Hehenkamp, Burkhard","last_name":"Hehenkamp"},{"first_name":"Oddvar","last_name":"Kaarboe","full_name":"Kaarboe, Oddvar"}],"volume":41,"title":"Paying for Performance in Hospitals","doi":"10.1016/s0313-5926(11)50004-9"},{"title":"Reengineering of Design Deficiencies in Component-Based Software Architectures","date_updated":"2022-01-06T07:03:08Z","publisher":"Universität Paderborn","date_created":"2017-10-17T12:42:58Z","author":[{"full_name":"Platenius, Marie Christin","last_name":"Platenius","first_name":"Marie Christin"}],"year":"2011","citation":{"chicago":"Platenius, Marie Christin. <i>Reengineering of Design Deficiencies in Component-Based Software Architectures</i>. Universität Paderborn, 2011.","ieee":"M. C. Platenius, <i>Reengineering of Design Deficiencies in Component-Based Software Architectures</i>. Universität Paderborn, 2011.","ama":"Platenius MC. <i>Reengineering of Design Deficiencies in Component-Based Software Architectures</i>. Universität Paderborn; 2011.","apa":"Platenius, M. C. (2011). <i>Reengineering of Design Deficiencies in Component-Based Software Architectures</i>. Universität Paderborn.","bibtex":"@book{Platenius_2011, title={Reengineering of Design Deficiencies in Component-Based Software Architectures}, publisher={Universität Paderborn}, author={Platenius, Marie Christin}, year={2011} }","short":"M.C. Platenius, Reengineering of Design Deficiencies in Component-Based Software Architectures, Universität Paderborn, 2011.","mla":"Platenius, Marie Christin. <i>Reengineering of Design Deficiencies in Component-Based Software Architectures</i>. Universität Paderborn, 2011."},"language":[{"iso":"eng"}],"_id":"650","project":[{"_id":"1","name":"SFB 901"},{"name":"SFB 901 - Subprojekt B1","_id":"9"},{"_id":"3","name":"SFB 901 - Project Area B"}],"department":[{"_id":"76"}],"user_id":"477","status":"public","type":"mastersthesis"}]