[{"date_updated":"2022-01-06T07:04:16Z","title":"A simple pre-stress estimating method of langevin transducers","year":"2008","status":"public","author":[{"full_name":"Bo, Fu","first_name":"Fu","last_name":"Bo"},{"last_name":"Ting","first_name":"Li","full_name":"Ting, Li"},{"id":"210","full_name":"Hemsel, Tobias","first_name":"Tobias","last_name":"Hemsel"}],"doi":"10.1109/SPAWDA.2008.4775801","user_id":"55222","page":"324-327","_id":"9568","language":[{"iso":"eng"}],"abstract":[{"text":"A simple pre-stress estimate method of Langevin transducers is studied. The measurement setup consists of a capacitor, an impedance converter and a voltmeter. Based on the piezoelectric equation and the basic circuit theory, the mathematical expression between the pre-stress and the voltage across the capacitor is derived. The pre-stress level can then be calculated out of the measurement of the capacitor voltage. In order to evaluate the precision of this method, a force washer is used to measure the pre-stress of the Langevin transducer. The result shows the pre-stress level obtained from this method is 30-40\\% higher than the pre-stress level measured by the force washer. This method is simple and can be used to estimate the pre-stress of various Langevin transducers. The precision of this method can be raised if d33 is identified under different pre-stress levels.","lang":"eng"}],"publication":"Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium on","citation":{"apa":"Bo, F., Ting, L., &#38; Hemsel, T. (2008). A simple pre-stress estimating method of langevin transducers. In <i>Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium on</i> (pp. 324–327). <a href=\"https://doi.org/10.1109/SPAWDA.2008.4775801\">https://doi.org/10.1109/SPAWDA.2008.4775801</a>","mla":"Bo, Fu, et al. “A Simple Pre-Stress Estimating Method of Langevin Transducers.” <i>Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium On</i>, 2008, pp. 324–27, doi:<a href=\"https://doi.org/10.1109/SPAWDA.2008.4775801\">10.1109/SPAWDA.2008.4775801</a>.","ieee":"F. Bo, L. Ting, and T. Hemsel, “A simple pre-stress estimating method of langevin transducers,” in <i>Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium on</i>, 2008, pp. 324–327.","chicago":"Bo, Fu, Li Ting, and Tobias Hemsel. “A Simple Pre-Stress Estimating Method of Langevin Transducers.” In <i>Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium On</i>, 324–27, 2008. <a href=\"https://doi.org/10.1109/SPAWDA.2008.4775801\">https://doi.org/10.1109/SPAWDA.2008.4775801</a>.","ama":"Bo F, Ting L, Hemsel T. A simple pre-stress estimating method of langevin transducers. In: <i>Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium On</i>. ; 2008:324-327. doi:<a href=\"https://doi.org/10.1109/SPAWDA.2008.4775801\">10.1109/SPAWDA.2008.4775801</a>","short":"F. Bo, L. Ting, T. Hemsel, in: Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium On, 2008, pp. 324–327.","bibtex":"@inproceedings{Bo_Ting_Hemsel_2008, title={A simple pre-stress estimating method of langevin transducers}, DOI={<a href=\"https://doi.org/10.1109/SPAWDA.2008.4775801\">10.1109/SPAWDA.2008.4775801</a>}, booktitle={Piezoelectricity, Acoustic Waves, and Device Applications, 2008. SPAWDA 2008. Symposium on}, author={Bo, Fu and Ting, Li and Hemsel, Tobias}, year={2008}, pages={324–327} }"},"keyword":["capacitors","impedance convertors","piezoelectric transducers","stress analysis","Langevin transducers","basic circuit theory","capacitor","impedance converter","piezoelectric equation","pre-stress estimating method","voltmeter","Capacitors","Educational institutions","Equations","Force measurement","Impedance measurement","Manufacturing","Mechatronics","Piezoelectric transducers","Voltage","Voltmeters","Langevin transducer","capacitor","piezoelectric element","pre-stress"],"type":"conference","department":[{"_id":"151"}],"date_created":"2019-04-29T11:16:13Z"},{"date_updated":"2022-01-06T07:04:16Z","intvolume":"        94","status":"public","title":"Local Ultrasonic Hyperthermia and Thermo-ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours","year":"2008","author":[{"full_name":"Lierke, Ernst-Günter","last_name":"Lierke","first_name":"Ernst-Günter"},{"full_name":"Hemsel, Tobias","first_name":"Tobias","last_name":"Hemsel","id":"210"}],"doi":"10.3813/AAA.918044","user_id":"55222","volume":94,"page":"369-381","_id":"9569","language":[{"iso":"eng"}],"quality_controlled":"1","abstract":[{"text":"Ultrasonic hyperthermia and thermo-ablation are two promising alternatives for local overheating of deep-seated human tumours. After a short characterisation of the two techniques and the identification of the main parameters, results of an analytical theory of local heat up, cooling, and heat diffusion are presented. The theory is based on a spherical model for hyperthermia with a critical thermal dose and on a cylinder-symmetrical model for thermo-ablation with a critical temperature threshold for thermal toxicity and cell death through coagulative necrosis. Two representative hard ware concepts are discussed. The hyperthermia applicator consists of a MHz transducer, which rotates concentrically in a water filled capsule with acoustically transparent window, and radiates collimated or focussed ultrasound under 45$\\,^{\\circ}$ into a concentric target area of nearly spherical symmetry. The applicator for thermo-ablation is a MHz transducer which radiates high intensity focussed ultrasound (HIFU) into \"cigar shaped\" target areas at the focal zone. Typical therapy diagrams for both techniques are presented. They show therapeutic target volumes as functions of the therapy time with the peak temperature or the radiated acoustic power as parameters. These diagrams are discussed under consideration of power requirement, maximal sound intensity, and power efficiency at close to optimized frequency conditions.","lang":"eng"}],"publication":"Acta Acustica united with Acustica","issue":"3","citation":{"bibtex":"@article{Lierke_Hemsel_2008, title={Local Ultrasonic Hyperthermia and Thermo-ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours}, volume={94}, DOI={<a href=\"https://doi.org/10.3813/AAA.918044\">10.3813/AAA.918044</a>}, number={3}, journal={Acta Acustica united with Acustica}, author={Lierke, Ernst-Günter and Hemsel, Tobias}, year={2008}, pages={369–381} }","ama":"Lierke E-G, Hemsel T. Local Ultrasonic Hyperthermia and Thermo-ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours. <i>Acta Acustica united with Acustica</i>. 2008;94(3):369-381. doi:<a href=\"https://doi.org/10.3813/AAA.918044\">10.3813/AAA.918044</a>","mla":"Lierke, Ernst-Günter, and Tobias Hemsel. “Local Ultrasonic Hyperthermia and Thermo-Ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours.” <i>Acta Acustica United with Acustica</i>, vol. 94, no. 3, 2008, pp. 369–81, doi:<a href=\"https://doi.org/10.3813/AAA.918044\">10.3813/AAA.918044</a>.","chicago":"Lierke, Ernst-Günter, and Tobias Hemsel. “Local Ultrasonic Hyperthermia and Thermo-Ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours.” <i>Acta Acustica United with Acustica</i> 94, no. 3 (2008): 369–81. <a href=\"https://doi.org/10.3813/AAA.918044\">https://doi.org/10.3813/AAA.918044</a>.","short":"E.-G. Lierke, T. Hemsel, Acta Acustica United with Acustica 94 (2008) 369–381.","ieee":"E.-G. Lierke and T. Hemsel, “Local Ultrasonic Hyperthermia and Thermo-ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours,” <i>Acta Acustica united with Acustica</i>, vol. 94, no. 3, pp. 369–381, 2008.","apa":"Lierke, E.-G., &#38; Hemsel, T. (2008). Local Ultrasonic Hyperthermia and Thermo-ablation: A Description and Theoretical Evaluation of Two Alternative Concepts for the Heat Therapy of Tumours. <i>Acta Acustica United with Acustica</i>, <i>94</i>(3), 369–381. <a href=\"https://doi.org/10.3813/AAA.918044\">https://doi.org/10.3813/AAA.918044</a>"},"type":"journal_article","department":[{"_id":"151"}],"date_created":"2019-04-29T11:55:56Z"},{"citation":{"mla":"Müller, Thomas, et al. “Verlässlichkeitorientierte Technologiebewertung Innovativer Aktortechnologien Am Beispiel von Formgedächtnislegierungen.” <i>2. Tagung Des DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer Systeme: Absicherung Der Systemzuverlässigkeit, Koblenz</i>, 2008.","bibtex":"@inproceedings{Müller_Schiedeck_Hemsel_2008, title={Verlässlichkeitorientierte Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen}, booktitle={2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und adaptronischer Systeme: Absicherung der Systemzuverlässigkeit, Koblenz}, author={Müller, Thomas and Schiedeck, Florian and Hemsel, Tobias}, year={2008} }","ama":"Müller T, Schiedeck F, Hemsel T. Verlässlichkeitorientierte Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen. In: <i>2. Tagung Des DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer Systeme: Absicherung Der Systemzuverlässigkeit, Koblenz</i>. ; 2008.","ieee":"T. Müller, F. Schiedeck, and T. Hemsel, “Verlässlichkeitorientierte Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen,” in <i>2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und adaptronischer Systeme: Absicherung der Systemzuverlässigkeit, Koblenz</i>, 2008.","apa":"Müller, T., Schiedeck, F., &#38; Hemsel, T. (2008). Verlässlichkeitorientierte Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen. In <i>2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und adaptronischer Systeme: Absicherung der Systemzuverlässigkeit, Koblenz</i>.","chicago":"Müller, Thomas, Florian Schiedeck, and Tobias Hemsel. “Verlässlichkeitorientierte Technologiebewertung Innovativer Aktortechnologien Am Beispiel von Formgedächtnislegierungen.” In <i>2. Tagung Des DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer Systeme: Absicherung Der Systemzuverlässigkeit, Koblenz</i>, 2008.","short":"T. Müller, F. Schiedeck, T. Hemsel, in: 2. Tagung Des DVM -- Arbeitskreis Zuverlässigkeit Mechatronischer Und Adaptronischer Systeme: Absicherung Der Systemzuverlässigkeit, Koblenz, 2008."},"publication":"2. Tagung des DVM -- Arbeitskreis Zuverlässigkeit mechatronischer und adaptronischer Systeme: Absicherung der Systemzuverlässigkeit, Koblenz","abstract":[{"lang":"eng","text":"EN: Although the use of new actuator technologies is quite enthusiastic, the realization of innovative systems based on these principles fails because of doubts in dependability. Until now, new working principles for actuators have not been systematically investigated in the means of dependability. Therefore we developed a proceeding for a dependability-oriented evaluation of technologies. This is shown in the case of shape memory alloy actuators. \r\nDE: Die Realisierung von Systemen mittels innovativer Aktortechnologien scheitert oftmals an der Skepsis gegenüber der Verlässlichkeit (Vertrauen in die zuverlässige und sichere Funktionalität der Technologie). Diese liegt darin begründet, dass neue Aktortechnologien bzw. die Integration von innovativen physikalischen Wirkprinzipen innerhalb neuer Aktorkonzepte bisher noch nicht systematisch im Kontext der Verlässlichkeit untersucht werden. Daher haben wir ein Vorgehen zur verlässlichkeitsorientierten Technologiebewertung entwickelt. Neben der detaillierten Darstellung des Vorgehensmodells wird es exemplarisch anhand von Formgedächtnislegierungen zur Entwicklung innovativer Antriebslösungen angewendet."}],"date_created":"2019-04-29T11:57:41Z","department":[{"_id":"151"}],"type":"conference","keyword":["EN: Dependability","Reliability","Evaluation of Technology","Actuators","Shape Memory Alloys DE: Verl{\\"],"author":[{"first_name":"Thomas","last_name":"Müller","full_name":"Müller, Thomas"},{"full_name":"Schiedeck, Florian","last_name":"Schiedeck","first_name":"Florian"},{"first_name":"Tobias","last_name":"Hemsel","full_name":"Hemsel, Tobias","id":"210"}],"year":"2008","status":"public","title":"Verlässlichkeitorientierte Technologiebewertung innovativer Aktortechnologien am Beispiel von Formgedächtnislegierungen","date_updated":"2022-01-06T07:04:16Z","language":[{"iso":"eng"}],"_id":"9570","user_id":"55222"},{"intvolume":"        20","date_updated":"2022-01-06T07:04:16Z","author":[{"first_name":"Maik","last_name":"Mracek","full_name":"Mracek, Maik"},{"last_name":"Hemsel","first_name":"Tobias","full_name":"Hemsel, Tobias","id":"210"},{"last_name":"Sattel","first_name":"Thomas","full_name":"Sattel, Thomas"},{"full_name":"Vasiljev, Piotr","first_name":"Piotr","last_name":"Vasiljev"},{"full_name":"Wallaschek, Jörg","first_name":"Jörg","last_name":"Wallaschek"}],"publication_identifier":{"issn":["1385-3449"]},"title":"Driving concepts for bundled ultrasonic linear motors","year":"2008","doi":"10.1007/s10832-007-9123-5","language":[{"iso":"eng"}],"abstract":[{"lang":"eng","text":"Several positioning tasks demand translatory drive instead of rotary motion. To achieve drives that are capable, e.g., to drive the sunroof of a car or to lift a car's window, multiple miniaturized motors can be combined. But in this case many other questions arise: The electromechanical behavior of the individual motors differs slightly, the motor characteristics are strongly dependent on the driving parameters and the driven load, many applications need some extra power for special cases like overcoming higher forces periodically. Thus, the bundle of motors has to act well-organized and at last controlled to get an optimized drive that is not oversized and costly."}],"issue":"3-4","publication":"Journal of Electroceramics","department":[{"_id":"151"}],"type":"journal_article","keyword":["Ultrasonic linear motor","High power","Control","Modeling","Characteristics"],"date_created":"2019-04-29T12:27:25Z","status":"public","volume":20,"user_id":"55222","_id":"9571","publisher":"Springer US","page":"153-158","quality_controlled":"1","citation":{"apa":"Mracek, M., Hemsel, T., Sattel, T., Vasiljev, P., &#38; Wallaschek, J. (2008). Driving concepts for bundled ultrasonic linear motors. <i>Journal of Electroceramics</i>, <i>20</i>(3–4), 153–158. <a href=\"https://doi.org/10.1007/s10832-007-9123-5\">https://doi.org/10.1007/s10832-007-9123-5</a>","ieee":"M. Mracek, T. Hemsel, T. Sattel, P. Vasiljev, and J. Wallaschek, “Driving concepts for bundled ultrasonic linear motors,” <i>Journal of Electroceramics</i>, vol. 20, no. 3–4, pp. 153–158, 2008.","short":"M. Mracek, T. Hemsel, T. Sattel, P. Vasiljev, J. Wallaschek, Journal of Electroceramics 20 (2008) 153–158.","chicago":"Mracek, Maik, Tobias Hemsel, Thomas Sattel, Piotr Vasiljev, and Jörg Wallaschek. “Driving Concepts for Bundled Ultrasonic Linear Motors.” <i>Journal of Electroceramics</i> 20, no. 3–4 (2008): 153–58. <a href=\"https://doi.org/10.1007/s10832-007-9123-5\">https://doi.org/10.1007/s10832-007-9123-5</a>.","mla":"Mracek, Maik, et al. “Driving Concepts for Bundled Ultrasonic Linear Motors.” <i>Journal of Electroceramics</i>, vol. 20, no. 3–4, Springer US, 2008, pp. 153–58, doi:<a href=\"https://doi.org/10.1007/s10832-007-9123-5\">10.1007/s10832-007-9123-5</a>.","ama":"Mracek M, Hemsel T, Sattel T, Vasiljev P, Wallaschek J. Driving concepts for bundled ultrasonic linear motors. <i>Journal of Electroceramics</i>. 2008;20(3-4):153-158. doi:<a href=\"https://doi.org/10.1007/s10832-007-9123-5\">10.1007/s10832-007-9123-5</a>","bibtex":"@article{Mracek_Hemsel_Sattel_Vasiljev_Wallaschek_2008, title={Driving concepts for bundled ultrasonic linear motors}, volume={20}, DOI={<a href=\"https://doi.org/10.1007/s10832-007-9123-5\">10.1007/s10832-007-9123-5</a>}, number={3–4}, journal={Journal of Electroceramics}, publisher={Springer US}, author={Mracek, Maik and Hemsel, Tobias and Sattel, Thomas and Vasiljev, Piotr and Wallaschek, Jörg}, year={2008}, pages={153–158} }"}},{"department":[{"_id":"151"}],"type":"conference","date_created":"2019-04-29T12:36:03Z","place":"New York","abstract":[{"text":"Integrating dependability in self-optimizing systems is a challenging task. Self-optimizing systems incorporate on the one hand the opportunity to apply novel solutions to complex mechatronic systems, but on the other hand constitute a possible risk because of non-determined behavior. The dependability concept in this paper covers both aspects: Increasing safety with selfoptimization and minimizing the risk of self-optimization. This dependability concept is combined with the self-optimization process of the active guidance module which is currently under development at the Collaborative Research Center 614 at the University of Paderborn.","lang":"eng"}],"citation":{"apa":"Sondermann-Wölke, C., Geisler, J., Müler, T., Trächtler, A., &#38; Böcker, J. (2008). The active guidance module of a rail-bound vehicle as an application for the dependability oriented design in self-optimizing systems. In <i>ASME 2008 -- International Design Engineering Technical Conferences \\&#38; Computers and Information in Engineering Conference (IDETC/CIE)</i>. New York.","ieee":"C. Sondermann-Wölke, J. Geisler, T. Müler, A. Trächtler, and J. Böcker, “The active guidance module of a rail-bound vehicle as an application for the dependability oriented design in self-optimizing systems,” in <i>ASME 2008 -- International Design Engineering Technical Conferences \\&#38; Computers and Information in Engineering Conference (IDETC/CIE)</i>, 2008.","chicago":"Sondermann-Wölke, Christoph, Jens Geisler, Thomas Müler, Ansgar Trächtler, and Joachim Böcker. “The Active Guidance Module of a Rail-Bound Vehicle as an Application for the Dependability Oriented Design in Self-Optimizing Systems.” In <i>ASME 2008 -- International Design Engineering Technical Conferences \\&#38; Computers and Information in Engineering Conference (IDETC/CIE)</i>. New York, 2008.","short":"C. Sondermann-Wölke, J. Geisler, T. Müler, A. Trächtler, J. Böcker, in: ASME 2008 -- International Design Engineering Technical Conferences \\&#38; Computers and Information in Engineering Conference (IDETC/CIE), New York, 2008.","mla":"Sondermann-Wölke, Christoph, et al. “The Active Guidance Module of a Rail-Bound Vehicle as an Application for the Dependability Oriented Design in Self-Optimizing Systems.” <i>ASME 2008 -- International Design Engineering Technical Conferences \\&#38; Computers and Information in Engineering Conference (IDETC/CIE)</i>, 2008.","ama":"Sondermann-Wölke C, Geisler J, Müler T, Trächtler A, Böcker J. The active guidance module of a rail-bound vehicle as an application for the dependability oriented design in self-optimizing systems. In: <i>ASME 2008 -- International Design Engineering Technical Conferences \\&#38; Computers and Information in Engineering Conference (IDETC/CIE)</i>. New York; 2008.","bibtex":"@inproceedings{Sondermann-Wölke_Geisler_Müler_Trächtler_Böcker_2008, place={New York}, title={The active guidance module of a rail-bound vehicle as an application for the dependability oriented design in self-optimizing systems}, booktitle={ASME 2008 -- International Design Engineering Technical Conferences \\&#38; Computers and Information in Engineering Conference (IDETC/CIE)}, author={Sondermann-Wölke, Christoph and Geisler, Jens and Müler, Thomas and Trächtler, Ansgar and Böcker, Joachim}, year={2008} }"},"publication":"ASME 2008 -- International Design Engineering Technical Conferences \\& Computers and Information in Engineering Conference (IDETC/CIE)","user_id":"55222","language":[{"iso":"eng"}],"_id":"9573","date_updated":"2022-01-06T07:04:16Z","author":[{"first_name":"Christoph","last_name":"Sondermann-Wölke","full_name":"Sondermann-Wölke, Christoph"},{"full_name":"Geisler, Jens","first_name":"Jens","last_name":"Geisler"},{"last_name":"Müler","first_name":"Thomas","full_name":"Müler, Thomas"},{"last_name":"Trächtler","first_name":"Ansgar","full_name":"Trächtler, Ansgar"},{"first_name":"Joachim","last_name":"Böcker","full_name":"Böcker, Joachim"}],"year":"2008","status":"public","title":"The active guidance module of a rail-bound vehicle as an application for the dependability oriented design in self-optimizing systems"},{"page":"237-241","publisher":"Springer US","_id":"9574","user_id":"55222","volume":20,"status":"public","citation":{"bibtex":"@article{Stroop_Uribe_Martinez_Brökelmann_Hemsel_Wallaschek_2008, title={Tactile tissue characterisation by piezoelectric systems}, volume={20}, DOI={<a href=\"https://doi.org/10.1007/s10832-007-9183-6\">10.1007/s10832-007-9183-6</a>}, number={3–4}, journal={Journal of Electroceramics}, publisher={Springer US}, author={Stroop, Ralf and Uribe, David Oliva and Martinez, Melisa Orta and Brökelmann, Michael and Hemsel, Tobias and Wallaschek, Jörg}, year={2008}, pages={237–241} }","ama":"Stroop R, Uribe DO, Martinez MO, Brökelmann M, Hemsel T, Wallaschek J. Tactile tissue characterisation by piezoelectric systems. <i>Journal of Electroceramics</i>. 2008;20(3-4):237-241. doi:<a href=\"https://doi.org/10.1007/s10832-007-9183-6\">10.1007/s10832-007-9183-6</a>","mla":"Stroop, Ralf, et al. “Tactile Tissue Characterisation by Piezoelectric Systems.” <i>Journal of Electroceramics</i>, vol. 20, no. 3–4, Springer US, 2008, pp. 237–41, doi:<a href=\"https://doi.org/10.1007/s10832-007-9183-6\">10.1007/s10832-007-9183-6</a>.","short":"R. Stroop, D.O. Uribe, M.O. Martinez, M. Brökelmann, T. Hemsel, J. Wallaschek, Journal of Electroceramics 20 (2008) 237–241.","chicago":"Stroop, Ralf, David Oliva Uribe, Melisa Orta Martinez, Michael Brökelmann, Tobias Hemsel, and Jörg Wallaschek. “Tactile Tissue Characterisation by Piezoelectric Systems.” <i>Journal of Electroceramics</i> 20, no. 3–4 (2008): 237–41. <a href=\"https://doi.org/10.1007/s10832-007-9183-6\">https://doi.org/10.1007/s10832-007-9183-6</a>.","ieee":"R. Stroop, D. O. Uribe, M. O. Martinez, M. Brökelmann, T. Hemsel, and J. Wallaschek, “Tactile tissue characterisation by piezoelectric systems,” <i>Journal of Electroceramics</i>, vol. 20, no. 3–4, pp. 237–241, 2008.","apa":"Stroop, R., Uribe, D. O., Martinez, M. O., Brökelmann, M., Hemsel, T., &#38; Wallaschek, J. (2008). Tactile tissue characterisation by piezoelectric systems. <i>Journal of Electroceramics</i>, <i>20</i>(3–4), 237–241. <a href=\"https://doi.org/10.1007/s10832-007-9183-6\">https://doi.org/10.1007/s10832-007-9183-6</a>"},"quality_controlled":"1","language":[{"iso":"eng"}],"doi":"10.1007/s10832-007-9183-6","year":"2008","title":"Tactile tissue characterisation by piezoelectric systems","author":[{"last_name":"Stroop","first_name":"Ralf","full_name":"Stroop, Ralf"},{"full_name":"Uribe, David Oliva","last_name":"Uribe","first_name":"David Oliva"},{"last_name":"Martinez","first_name":"Melisa Orta","full_name":"Martinez, Melisa Orta"},{"first_name":"Michael","last_name":"Brökelmann","full_name":"Brökelmann, Michael"},{"id":"210","full_name":"Hemsel, Tobias","first_name":"Tobias","last_name":"Hemsel"},{"first_name":"Jörg","last_name":"Wallaschek","full_name":"Wallaschek, Jörg"}],"publication_identifier":{"issn":["1385-3449"]},"date_updated":"2022-01-06T07:04:16Z","intvolume":"        20","date_created":"2019-04-29T12:50:44Z","keyword":["Piezo ceramics","Bimorph","Tactile sensor","Tumour tissue"],"type":"journal_article","department":[{"_id":"151"}],"issue":"3-4","publication":"Journal of Electroceramics","abstract":[{"lang":"eng","text":"For devices having non-linear contact, load plays a fundamental role. Variations in the characteristics of the load cause change in eigenfrequency and amplitude of the vibration. In most technical applications, this unwanted behaviour is cancelled by the use of control algorithms. However, multiple applications, like bond quality monitoring or chemical and pressure sensors, have found that the load may be characterised by interpreting the change in characteristics of a resonant vibrating device used as a sensor. Surgical resection of tumours is a very difficult task. After localising the tumour by the use of imaging techniques, the resection demands the surgeon to decide where and what to resect based on visual and tactile differentiation of tumour and healthy tissue. Exactness of this process could be enhanced if we can provide the surgeon with a device capable of evaluating mechanical characteristics of the tissue much more accurately than the surgeon himself can do. As the mechanical characteristics of tumour and healthy tissue differ but slightly, the task is to design a system with high sensitivity. Therefore, we have developed a resonant actuator-sensor that allows the differentiation among distinct media that have similar mechanical characteristics to tumour and healthy tissue using a piezoelectric bimorph. The design is based on the detection and evaluation of frequency shift and amplitude variation of the fundamental and higher harmonics using one layer for the resonant excitation of vibration and the other one as the sensing element."}]},{"page":"209-214","_id":"9575","publisher":"Springer US","user_id":"55222","volume":20,"status":"public","citation":{"mla":"Twiefel, Jens, et al. “Fundamental Experiments as Benchmark Problems for Modeling Ultrasonic Micro-Impact Processes.” <i>Journal of Electroceramics</i>, vol. 20, no. 3–4, Springer US, 2008, pp. 209–14, doi:<a href=\"https://doi.org/10.1007/s10832-007-9169-4\">10.1007/s10832-007-9169-4</a>.","ama":"Twiefel J, Potthast C, Mracek M, Hemsel T, Sattel T, Wallaschek J. Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes. <i>Journal of Electroceramics</i>. 2008;20(3-4):209-214. doi:<a href=\"https://doi.org/10.1007/s10832-007-9169-4\">10.1007/s10832-007-9169-4</a>","bibtex":"@article{Twiefel_Potthast_Mracek_Hemsel_Sattel_Wallaschek_2008, title={Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes}, volume={20}, DOI={<a href=\"https://doi.org/10.1007/s10832-007-9169-4\">10.1007/s10832-007-9169-4</a>}, number={3–4}, journal={Journal of Electroceramics}, publisher={Springer US}, author={Twiefel, Jens and Potthast, Christian and Mracek, Maik and Hemsel, Tobias and Sattel, Thomas and Wallaschek, Jörg}, year={2008}, pages={209–214} }","apa":"Twiefel, J., Potthast, C., Mracek, M., Hemsel, T., Sattel, T., &#38; Wallaschek, J. (2008). Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes. <i>Journal of Electroceramics</i>, <i>20</i>(3–4), 209–214. <a href=\"https://doi.org/10.1007/s10832-007-9169-4\">https://doi.org/10.1007/s10832-007-9169-4</a>","ieee":"J. Twiefel, C. Potthast, M. Mracek, T. Hemsel, T. Sattel, and J. Wallaschek, “Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes,” <i>Journal of Electroceramics</i>, vol. 20, no. 3–4, pp. 209–214, 2008.","short":"J. Twiefel, C. Potthast, M. Mracek, T. Hemsel, T. Sattel, J. Wallaschek, Journal of Electroceramics 20 (2008) 209–214.","chicago":"Twiefel, Jens, Christian Potthast, Maik Mracek, Tobias Hemsel, Thomas Sattel, and Jörg Wallaschek. “Fundamental Experiments as Benchmark Problems for Modeling Ultrasonic Micro-Impact Processes.” <i>Journal of Electroceramics</i> 20, no. 3–4 (2008): 209–14. <a href=\"https://doi.org/10.1007/s10832-007-9169-4\">https://doi.org/10.1007/s10832-007-9169-4</a>."},"quality_controlled":"1","language":[{"iso":"eng"}],"doi":"10.1007/s10832-007-9169-4","title":"Fundamental experiments as benchmark problems for modeling ultrasonic micro-impact processes","year":"2008","author":[{"last_name":"Twiefel","first_name":"Jens","full_name":"Twiefel, Jens"},{"full_name":"Potthast, Christian","first_name":"Christian","last_name":"Potthast"},{"last_name":"Mracek","first_name":"Maik","full_name":"Mracek, Maik"},{"id":"210","full_name":"Hemsel, Tobias","last_name":"Hemsel","first_name":"Tobias"},{"first_name":"Thomas","last_name":"Sattel","full_name":"Sattel, Thomas"},{"full_name":"Wallaschek, Jörg","last_name":"Wallaschek","first_name":"Jörg"}],"publication_identifier":{"issn":["1385-3449"]},"date_updated":"2022-01-06T07:04:16Z","intvolume":"        20","date_created":"2019-04-29T13:06:13Z","type":"journal_article","keyword":["Contact measurements","Vibro-impact","Ultrasonic application"],"department":[{"_id":"151"}],"issue":"3-4","publication":"Journal of Electroceramics","abstract":[{"text":"Many ultrasonic processes are based on the mechanical contact of oscillating parts. Within ultrasonic machining (drilling, milling, grinding) micro impacts lead to abrasion at the processed workpiece and hopefully do not damage the tool. In ultrasonic motors ideally neither part gets worn. Thus the appropriate design of contact partners as well as their kinematics is a substantial task during the development of such devices. A first step to optimize contact mechanics is to understand their behavior and dependencies on parameter variations, such as vibration amplitude and pre-stress of the impacting parts. For a detailed understanding models validated with convincing experimental data from measurements are absolutely essential. This paper focuses on simple vibro-impact experiments which can be used as benchmark data for future models. The setup of the experiment and first experimental investigations are described in detail.","lang":"eng"}]},{"year":"2008","title":"Development of a biomedical tissue differentiation system using piezoelectric actuators","status":"public","author":[{"full_name":"Uribe, David Oliva","first_name":"David Oliva","last_name":"Uribe"},{"full_name":"Stroop, Ralf","last_name":"Stroop","first_name":"Ralf"},{"id":"210","first_name":"Tobias","last_name":"Hemsel","full_name":"Hemsel, Tobias"},{"full_name":"Wallaschek, Jörg","first_name":"Jörg","last_name":"Wallaschek"}],"publication_identifier":{"issn":["1075-6787"]},"date_updated":"2022-01-06T07:04:16Z","page":"91-94","_id":"9576","language":[{"iso":"eng"}],"doi":"10.1109/FREQ.2008.4622963","user_id":"55222","publication":"Frequency Control Symposium, 2008 IEEE International","citation":{"bibtex":"@inproceedings{Uribe_Stroop_Hemsel_Wallaschek_2008, title={Development of a biomedical tissue differentiation system using piezoelectric actuators}, DOI={<a href=\"https://doi.org/10.1109/FREQ.2008.4622963\">10.1109/FREQ.2008.4622963</a>}, booktitle={Frequency Control Symposium, 2008 IEEE International}, author={Uribe, David Oliva and Stroop, Ralf and Hemsel, Tobias and Wallaschek, Jörg}, year={2008}, pages={91–94} }","ama":"Uribe DO, Stroop R, Hemsel T, Wallaschek J. Development of a biomedical tissue differentiation system using piezoelectric actuators. In: <i>Frequency Control Symposium, 2008 IEEE International</i>. ; 2008:91-94. doi:<a href=\"https://doi.org/10.1109/FREQ.2008.4622963\">10.1109/FREQ.2008.4622963</a>","mla":"Uribe, David Oliva, et al. “Development of a Biomedical Tissue Differentiation System Using Piezoelectric Actuators.” <i>Frequency Control Symposium, 2008 IEEE International</i>, 2008, pp. 91–94, doi:<a href=\"https://doi.org/10.1109/FREQ.2008.4622963\">10.1109/FREQ.2008.4622963</a>.","short":"D.O. Uribe, R. Stroop, T. Hemsel, J. Wallaschek, in: Frequency Control Symposium, 2008 IEEE International, 2008, pp. 91–94.","chicago":"Uribe, David Oliva, Ralf Stroop, Tobias Hemsel, and Jörg Wallaschek. “Development of a Biomedical Tissue Differentiation System Using Piezoelectric Actuators.” In <i>Frequency Control Symposium, 2008 IEEE International</i>, 91–94, 2008. <a href=\"https://doi.org/10.1109/FREQ.2008.4622963\">https://doi.org/10.1109/FREQ.2008.4622963</a>.","ieee":"D. O. Uribe, R. Stroop, T. Hemsel, and J. Wallaschek, “Development of a biomedical tissue differentiation system using piezoelectric actuators,” in <i>Frequency Control Symposium, 2008 IEEE International</i>, 2008, pp. 91–94.","apa":"Uribe, D. O., Stroop, R., Hemsel, T., &#38; Wallaschek, J. (2008). Development of a biomedical tissue differentiation system using piezoelectric actuators. In <i>Frequency Control Symposium, 2008 IEEE International</i> (pp. 91–94). <a href=\"https://doi.org/10.1109/FREQ.2008.4622963\">https://doi.org/10.1109/FREQ.2008.4622963</a>"},"quality_controlled":"1","abstract":[{"text":"In neurosurgery, delineation of tumor boundaries during resection of brain tumors is of substantial relevance. During operation distinction between tumor and healthy tissue rely on the abilities of the surgeon based on visual and tactile differentiation. In this paper a high sensitivity actuator-sensor system using a piezoelectric bimorph is presented. Frequency shift and transfer function of the bimorphpsilas voltages are detected and evaluated. Sensorpsilas sensitivity is evaluated using two frequency controls strategies: A phase-locked loop (PLL) and a self-oscillating circuit. Results of measurements conducted on gel-phantoms are presented and discussed.","lang":"eng"}],"date_created":"2019-04-29T13:07:39Z","type":"conference","keyword":["biomedical measurement","brain","cancer","neurophysiology","phantoms","phase locked loops","piezoelectric actuators","surgery","tactile sensors","transfer functions","tumours","PLL","biomedical tissue differentiation system","brain tumor resection","frequency control","frequency shift","gel-phantom","high sensitivity actuator-sensor system","neurosurgery","phase-locked loop","piezoelectric actuators","piezoelectric bimorph","self-oscillating circuit","sensor sensitivity","tactile differentiation","tactile sensor system","transfer function","tumor boundary","visual differentiation","Biomedical measurements","Circuits","Frequency control","Neoplasms","Neurosurgery","Phase locked loops","Piezoelectric actuators","Surges","Transfer functions","Voltage"],"department":[{"_id":"151"}]},{"status":"public","title":"Proceedings of the twentieth annual symposium on Parallelism in algorithms and architectures - SPAA '08","year":"2008","publication_identifier":{"isbn":["978-1-59593-973-9"]},"date_updated":"2022-01-06T06:52:50Z","publication_status":"published","_id":"16466","publisher":"ACM","language":[{"iso":"eng"}],"doi":"10.1145/1378533","user_id":"15415","editor":[{"id":"15523","last_name":"Meyer auf der Heide","first_name":"Friedhelm","full_name":"Meyer auf der Heide, Friedhelm"},{"full_name":"Shavit, Nir","last_name":"Shavit","first_name":"Nir"}],"citation":{"chicago":"Meyer auf der Heide, Friedhelm, and Nir Shavit, eds. <i>Proceedings of the Twentieth Annual Symposium on Parallelism in Algorithms and Architectures - SPAA ’08</i>. ACM, 2008. <a href=\"https://doi.org/10.1145/1378533\">https://doi.org/10.1145/1378533</a>.","short":"F. Meyer auf der Heide, N. Shavit, eds., Proceedings of the Twentieth Annual Symposium on Parallelism in Algorithms and Architectures - SPAA ’08, ACM, 2008.","ieee":"F. Meyer auf der Heide and N. Shavit, Eds., <i>Proceedings of the twentieth annual symposium on Parallelism in algorithms and architectures - SPAA ’08</i>. ACM, 2008.","apa":"Meyer auf der Heide, F., &#38; Shavit, N. (Eds.). (2008). <i>Proceedings of the twentieth annual symposium on Parallelism in algorithms and architectures - SPAA ’08</i>. ACM. <a href=\"https://doi.org/10.1145/1378533\">https://doi.org/10.1145/1378533</a>","bibtex":"@book{Meyer auf der Heide_Shavit_2008, title={Proceedings of the twentieth annual symposium on Parallelism in algorithms and architectures - SPAA ’08}, DOI={<a href=\"https://doi.org/10.1145/1378533\">10.1145/1378533</a>}, publisher={ACM}, year={2008} }","ama":"Meyer auf der Heide F, Shavit N, eds. <i>Proceedings of the Twentieth Annual Symposium on Parallelism in Algorithms and Architectures - SPAA ’08</i>. ACM; 2008. doi:<a href=\"https://doi.org/10.1145/1378533\">10.1145/1378533</a>","mla":"Meyer auf der Heide, Friedhelm, and Nir Shavit, editors. <i>Proceedings of the Twentieth Annual Symposium on Parallelism in Algorithms and Architectures - SPAA ’08</i>. ACM, 2008, doi:<a href=\"https://doi.org/10.1145/1378533\">10.1145/1378533</a>."},"date_created":"2020-04-08T08:46:08Z","type":"conference_editor","department":[{"_id":"63"}]},{"citation":{"ama":"Tröster T, Howe C, Müller M, Rostek W. Development status and market potential of hot formed ballistic steels. In: ; 2008.","bibtex":"@inproceedings{Tröster_Howe_Müller_Rostek_2008, title={Development status and market potential of hot formed ballistic steels}, author={Tröster, Thomas and Howe, C. and Müller, M. and Rostek, W.}, year={2008} }","mla":"Tröster, Thomas, et al. <i>Development Status and Market Potential of Hot Formed Ballistic Steels</i>. 2008.","short":"T. Tröster, C. Howe, M. Müller, W. Rostek, in: 2008.","chicago":"Tröster, Thomas, C. Howe, M. Müller, and W. Rostek. “Development Status and Market Potential of Hot Formed Ballistic Steels,” 2008.","apa":"Tröster, T., Howe, C., Müller, M., &#38; Rostek, W. (2008). Development status and market potential of hot formed ballistic steels. Presented at the Steels in Cars and Trucks, Wiesbaden.","ieee":"T. Tröster, C. Howe, M. Müller, and W. Rostek, “Development status and market potential of hot formed ballistic steels,” presented at the Steels in Cars and Trucks, Wiesbaden, 2008."},"type":"conference","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"date_created":"2020-02-21T13:37:20Z","date_updated":"2022-01-06T06:52:41Z","status":"public","title":"Development status and market potential of hot formed ballistic steels","year":"2008","author":[{"id":"553","last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas"},{"full_name":"Howe, C.","first_name":"C.","last_name":"Howe"},{"last_name":"Müller","first_name":"M.","full_name":"Müller, M."},{"full_name":"Rostek, W.","first_name":"W.","last_name":"Rostek"}],"conference":{"location":"Wiesbaden","name":"Steels in Cars and Trucks","start_date":"2008-06-01","end_date":"2008-06-05"},"user_id":"72008","language":[{"iso":"eng"}],"_id":"15954"},{"user_id":"72008","doi":"10.4028/www.scientific.net/msf.584-586.864","volume":"584-586","page":"864-869","language":[{"iso":"eng"}],"_id":"15955","publication_status":"published","date_updated":"2022-01-06T06:52:41Z","status":"public","title":"The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel","year":"2008","publication_identifier":{"issn":["1662-9752"]},"author":[{"first_name":"Thomas","last_name":"Niendorf","full_name":"Niendorf, Thomas"},{"id":"338","last_name":"Marten","first_name":"Thorsten","full_name":"Marten, Thorsten"},{"full_name":"Maier, Hans J.","last_name":"Maier","first_name":"Hans J."},{"first_name":"Ibrahim","last_name":"Karaman","full_name":"Karaman, Ibrahim"}],"type":"journal_article","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"date_created":"2020-02-21T13:41:59Z","abstract":[{"lang":"eng","text":"<jats:p>The present paper reports on the effect of texture on the cyclic stress-strain response\r\n(CSSR) and the fatigue life of ultrafine-grained (UFG) interstitial-free (IF) steel. Tests in the lowcycle\r\nfatigue (LCF) regime were conducted on material that was processed by the equal channel\r\nangular extrusion (ECAE) technique along the so called “efficient” route 8E. This route has been\r\nshown to result in a homogeneous microstructure with a high fraction of high angle grain\r\nboundaries (HAGBs), which are beneficial for a stable CSSR. In addition, the evolution of the\r\nmicrostructure was characterized by means of electron optical techniques, including electron\r\nbackscattered diffraction, and by X-Ray diffractometry. It was found that the initial texture of\r\nspecimens cut from the ECAE billet along different orientations with respect to the extrusion\r\ndirection (ED) has a substantial effect on the CSSR of the UFG IF steel. Furthermore, microscopy\r\nresults indicated the notable influence of the last ECAE processing step on the evolution of damage\r\nin the material.</jats:p>"}],"publication":"Materials Science Forum","citation":{"ama":"Niendorf T, Marten T, Maier HJ, Karaman I. The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel. <i>Materials Science Forum</i>. 2008;584-586:864-869. doi:<a href=\"https://doi.org/10.4028/www.scientific.net/msf.584-586.864\">10.4028/www.scientific.net/msf.584-586.864</a>","bibtex":"@article{Niendorf_Marten_Maier_Karaman_2008, title={The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel}, volume={584–586}, DOI={<a href=\"https://doi.org/10.4028/www.scientific.net/msf.584-586.864\">10.4028/www.scientific.net/msf.584-586.864</a>}, journal={Materials Science Forum}, author={Niendorf, Thomas and Marten, Thorsten and Maier, Hans J. and Karaman, Ibrahim}, year={2008}, pages={864–869} }","mla":"Niendorf, Thomas, et al. “The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel.” <i>Materials Science Forum</i>, vol. 584–586, 2008, pp. 864–69, doi:<a href=\"https://doi.org/10.4028/www.scientific.net/msf.584-586.864\">10.4028/www.scientific.net/msf.584-586.864</a>.","short":"T. Niendorf, T. Marten, H.J. Maier, I. Karaman, Materials Science Forum 584–586 (2008) 864–869.","chicago":"Niendorf, Thomas, Thorsten Marten, Hans J. Maier, and Ibrahim Karaman. “The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel.” <i>Materials Science Forum</i> 584–586 (2008): 864–69. <a href=\"https://doi.org/10.4028/www.scientific.net/msf.584-586.864\">https://doi.org/10.4028/www.scientific.net/msf.584-586.864</a>.","apa":"Niendorf, T., Marten, T., Maier, H. J., &#38; Karaman, I. (2008). The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel. <i>Materials Science Forum</i>, <i>584</i>–<i>586</i>, 864–869. <a href=\"https://doi.org/10.4028/www.scientific.net/msf.584-586.864\">https://doi.org/10.4028/www.scientific.net/msf.584-586.864</a>","ieee":"T. Niendorf, T. Marten, H. J. Maier, and I. Karaman, “The Effect of Texture on the Fatigue Properties of Ultrafine-Grained Interstitial-Free Steel,” <i>Materials Science Forum</i>, vol. 584–586, pp. 864–869, 2008."}},{"type":"journal_article","keyword":["UML     SysML     Model-based design     System specification     Modelling languages"],"department":[{"_id":"672"}],"date_created":"2022-12-19T12:18:21Z","abstract":[{"text":"UML has been widely accepted by the software community for several years. As electronic systems design can no longer be seen as an isolated hardware design activity, UML becomes of significant interest as a unification language for systems description combining both HW and SW components. This article provides a comprehensive view of the UML applied to System-on-Chip (SoC) and hardware-related embedded systems design. The modeling concepts in the UML language are first introduced, including major diagrams for the representation of the behavior and the structure of systems. The principles behind application specific UML customizations (UML profiles) are summarized, and several examples relevant for SoC design are given, such as the SysML (System Modeling Language) and the SoC Profile. Thereafter, various approaches associating UML with existing HW/SW design languages are presented. Beyond language aspects, the article addresses the question of UML-based design flows, and shows how UML can be applied concretely to the development of electronic-based systems. The current situation about tool support constitutes the last focus of the article. In particular, we show how UML tools can be combined with well-known simulation environments, such as MATLAB.","lang":"eng"}],"publication":"Design Automation for Embedded Systems","citation":{"apa":"Vanderperren, Y., Müller, W., &#38; Dahaene, W. (2008). UML for Electronic Systems Design – A Comprehensive Overview. <i>Design Automation for Embedded Systems</i>, <i>12</i>, 261–292. <a href=\"https://doi.org/10.1007/s10617-008-9028-9\">https://doi.org/10.1007/s10617-008-9028-9</a>","ieee":"Y. Vanderperren, W. Müller, and W. Dahaene, “UML for Electronic Systems Design – A Comprehensive Overview,” <i>Design Automation for Embedded Systems</i>, vol. 12, pp. 261–292, 2008, doi: <a href=\"https://doi.org/10.1007/s10617-008-9028-9\">10.1007/s10617-008-9028-9</a>.","chicago":"Vanderperren, Yves, Wolfgang Müller, and Wim Dahaene. “UML for Electronic Systems Design – A Comprehensive Overview.” <i>Design Automation for Embedded Systems</i> 12 (2008): 261–92. <a href=\"https://doi.org/10.1007/s10617-008-9028-9\">https://doi.org/10.1007/s10617-008-9028-9</a>.","short":"Y. Vanderperren, W. Müller, W. Dahaene, Design Automation for Embedded Systems 12 (2008) 261–292.","mla":"Vanderperren, Yves, et al. “UML for Electronic Systems Design – A Comprehensive Overview.” <i>Design Automation for Embedded Systems</i>, vol. 12, Springer-Verlag, 2008, pp. 261–92, doi:<a href=\"https://doi.org/10.1007/s10617-008-9028-9\">10.1007/s10617-008-9028-9</a>.","ama":"Vanderperren Y, Müller W, Dahaene W. UML for Electronic Systems Design – A Comprehensive Overview. <i>Design Automation for Embedded Systems</i>. 2008;12:261-292. doi:<a href=\"https://doi.org/10.1007/s10617-008-9028-9\">10.1007/s10617-008-9028-9</a>","bibtex":"@article{Vanderperren_Müller_Dahaene_2008, title={UML for Electronic Systems Design – A Comprehensive Overview}, volume={12}, DOI={<a href=\"https://doi.org/10.1007/s10617-008-9028-9\">10.1007/s10617-008-9028-9</a>}, journal={Design Automation for Embedded Systems}, publisher={Springer-Verlag}, author={Vanderperren, Yves and Müller, Wolfgang and Dahaene, Wim}, year={2008}, pages={261–292} }"},"doi":"10.1007/s10617-008-9028-9","user_id":"5786","volume":12,"page":"261-292","publisher":"Springer-Verlag","_id":"34563","language":[{"iso":"eng"}],"date_updated":"2022-12-19T12:23:56Z","intvolume":"        12","year":"2008","title":"UML for Electronic Systems Design – A Comprehensive Overview","status":"public","author":[{"full_name":"Vanderperren, Yves","first_name":"Yves","last_name":"Vanderperren"},{"first_name":"Wolfgang","last_name":"Müller","full_name":"Müller, Wolfgang","id":"16243"},{"last_name":"Dahaene","first_name":"Wim","full_name":"Dahaene, Wim"}]},{"language":[{"iso":"ger"}],"_id":"34781","page":"728 f","volume":286,"doi":"https://doi.org/10.1524/hzhz.2008.0030","user_id":"16220","author":[{"id":"16220","first_name":"Johannes","orcid":"0000-0001-5716-0863","last_name":"Süßmann","full_name":"Süßmann, Johannes"}],"status":"public","title":"[Rez. v.] Sylvia Schraut: Das Haus Schönborn. Eine Familienbiographie. Katholischer Reichsadel 1640-1840 (=Publikationen der Gesellschaft für fränkische Geschichte, Reihe 9. Darstellungen aus der fränkischen Geschichte. 47). Paderborn, München, Wien, Zürich 2005","year":"2008","intvolume":"       286","date_updated":"2022-12-28T21:26:45Z","publication_status":"published","date_created":"2022-12-21T18:05:32Z","department":[{"_id":"446"}],"type":"review","citation":{"mla":"Süßmann, Johannes. “[Rez. v.] Sylvia Schraut: Das Haus Schönborn. Eine Familienbiographie. Katholischer Reichsadel 1640-1840 (=Publikationen der Gesellschaft für fränkische Geschichte, Reihe 9. Darstellungen aus der fränkischen Geschichte. 47). Paderborn, München, Wien, Zürich 2005.” <i>Historische Zeitschrift</i>, vol. 286, 2008, p. 728 f, doi:<a href=\"https://doi.org/10.1524/hzhz.2008.0030\">https://doi.org/10.1524/hzhz.2008.0030</a>.","bibtex":"@article{Süßmann_2008, title={[Rez. v.] Sylvia Schraut: Das Haus Schönborn. Eine Familienbiographie. Katholischer Reichsadel 1640-1840 (=Publikationen der Gesellschaft für fränkische Geschichte, Reihe 9. Darstellungen aus der fränkischen Geschichte. 47). Paderborn, München, Wien, Zürich 2005}, volume={286}, DOI={<a href=\"https://doi.org/10.1524/hzhz.2008.0030\">https://doi.org/10.1524/hzhz.2008.0030</a>}, journal={Historische Zeitschrift}, author={Süßmann, Johannes}, year={2008}, pages={728 f} }","ama":"Süßmann J. [Rez. v.] Sylvia Schraut: Das Haus Schönborn. Eine Familienbiographie. Katholischer Reichsadel 1640-1840 (=Publikationen der Gesellschaft für fränkische Geschichte, Reihe 9. Darstellungen aus der fränkischen Geschichte. 47). Paderborn, München, Wien, Zürich 2005. <i>Historische Zeitschrift</i>. 2008;286:728 f. doi:<a href=\"https://doi.org/10.1524/hzhz.2008.0030\">https://doi.org/10.1524/hzhz.2008.0030</a>","ieee":"J. Süßmann, “[Rez. v.] Sylvia Schraut: Das Haus Schönborn. Eine Familienbiographie. Katholischer Reichsadel 1640-1840 (=Publikationen der Gesellschaft für fränkische Geschichte, Reihe 9. Darstellungen aus der fränkischen Geschichte. 47). Paderborn, München, Wien, Zürich 2005,” <i>Historische Zeitschrift</i>, vol. 286. p. 728 f, 2008, doi: <a href=\"https://doi.org/10.1524/hzhz.2008.0030\">https://doi.org/10.1524/hzhz.2008.0030</a>.","apa":"Süßmann, J. (2008). [Rez. v.] Sylvia Schraut: Das Haus Schönborn. Eine Familienbiographie. Katholischer Reichsadel 1640-1840 (=Publikationen der Gesellschaft für fränkische Geschichte, Reihe 9. Darstellungen aus der fränkischen Geschichte. 47). Paderborn, München, Wien, Zürich 2005. In <i>Historische Zeitschrift</i> (Vol. 286, p. 728 f). <a href=\"https://doi.org/10.1524/hzhz.2008.0030\">https://doi.org/10.1524/hzhz.2008.0030</a>","chicago":"Süßmann, Johannes. “[Rez. v.] Sylvia Schraut: Das Haus Schönborn. Eine Familienbiographie. Katholischer Reichsadel 1640-1840 (=Publikationen der Gesellschaft für fränkische Geschichte, Reihe 9. Darstellungen aus der fränkischen Geschichte. 47). Paderborn, München, Wien, Zürich 2005.” <i>Historische Zeitschrift</i>, 2008. <a href=\"https://doi.org/10.1524/hzhz.2008.0030\">https://doi.org/10.1524/hzhz.2008.0030</a>.","short":"J. Süßmann, Historische Zeitschrift 286 (2008) 728 f."},"publication":"Historische Zeitschrift","extern":"1"},{"_id":"9572","publication_date":"21.12.2011","user_id":"210","title":"Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit","year":"2008","status":"public","author":[{"full_name":"Rischmueller, Volker","first_name":"Volker","last_name":"Rischmueller"},{"first_name":"Jörg","last_name":"Wallaschek","full_name":"Wallaschek, Jörg"},{"full_name":"Froehlich, Peter","first_name":"Peter","last_name":"Froehlich"},{"last_name":"Haussecker","first_name":"Walter","full_name":"Haussecker, Walter"},{"full_name":"Rieger, Vincent","first_name":"Vincent","last_name":"Rieger"},{"first_name":"Jens","last_name":"Twiefel","full_name":"Twiefel, Jens"},{"full_name":"Guenther, Dirk","last_name":"Guenther","first_name":"Dirk"},{"id":"210","full_name":"Hemsel, Tobias","first_name":"Tobias","last_name":"Hemsel"}],"date_updated":"2022-01-06T12:22:51Z","ipn":"EP000002156480B1","application_number":"DE102007021339A1 ","date_created":"2019-04-29T12:28:53Z","type":"patent","department":[{"_id":"151"}],"application_date":"07.05.2007","citation":{"chicago":"Rischmueller, Volker, Jörg Wallaschek, Peter Froehlich, Walter Haussecker, Vincent Rieger, Jens Twiefel, Dirk Guenther, and Tobias Hemsel. “Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit,” 2008.","short":"V. Rischmueller, J. Wallaschek, P. Froehlich, W. Haussecker, V. Rieger, J. Twiefel, D. Guenther, T. Hemsel, (2008).","apa":"Rischmueller, V., Wallaschek, J., Froehlich, P., Haussecker, W., Rieger, V., Twiefel, J., Guenther, D., &#38; Hemsel, T. (2008). <i>Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit</i>.","ieee":"V. Rischmueller <i>et al.</i>, “Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit.” 2008.","ama":"Rischmueller V, Wallaschek J, Froehlich P, et al. Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit. Published online 2008.","bibtex":"@article{Rischmueller_Wallaschek_Froehlich_Haussecker_Rieger_Twiefel_Guenther_Hemsel_2008, title={Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit}, author={Rischmueller, Volker and Wallaschek, Jörg and Froehlich, Peter and Haussecker, Walter and Rieger, Vincent and Twiefel, Jens and Guenther, Dirk and Hemsel, Tobias}, year={2008} }","mla":"Rischmueller, Volker, et al. <i>Patent EP2156480: Piezoelektrische Antriebsvorrichtung / Piezoelectric Drive Unit</i>. 2008."},"ipc":"H01L 41/09, B60J 1/17"},{"_id":"33815","publisher":"Springer Verlag","page":"98-117","editor":[{"full_name":"Broy, Manfred","first_name":"Manfred","last_name":"Broy"},{"last_name":"Krüger","first_name":"Ingolf H.","full_name":"Krüger, Ingolf H."},{"full_name":"Meisinger, Michael","first_name":"Michael","last_name":"Meisinger"}],"user_id":"5786","status":"public","place":"Berlin, Heidelberg","citation":{"ieee":"J. Großmann, I. Fey, A. Krupp, M. Conrad, C. Wewetzer, and W. Müller, “TestML – A Test Exchange Language for Model-based Testing of Embedded Software,” in <i>ASWSD 2006: Model-Driven Development of Reliable Automotive Services</i>, M. Broy, I. H. Krüger, and M. Meisinger, Eds. Berlin, Heidelberg: Springer Verlag, 2008, pp. 98–117.","apa":"Großmann, J., Fey, I., Krupp, A., Conrad, M., Wewetzer, C., &#38; Müller, W. (2008). TestML – A Test Exchange Language for Model-based Testing of Embedded Software. In M. Broy, I. H. Krüger, &#38; M. Meisinger (Eds.), <i>ASWSD 2006: Model-Driven Development of Reliable Automotive Services</i> (pp. 98–117). Springer Verlag. <a href=\"https://doi.org/10.1007/978-3-540-70930-5_7\">https://doi.org/10.1007/978-3-540-70930-5_7</a>","short":"J. Großmann, I. Fey, A. Krupp, M. Conrad, C. Wewetzer, W. Müller, in: M. Broy, I.H. Krüger, M. Meisinger (Eds.), ASWSD 2006: Model-Driven Development of Reliable Automotive Services, Springer Verlag, Berlin, Heidelberg, 2008, pp. 98–117.","chicago":"Großmann, Jürgen, Ines Fey, Alexander Krupp, Mirko Conrad, Christian Wewetzer, and Wolfgang Müller. “TestML – A Test Exchange Language for Model-Based Testing of Embedded Software.” In <i>ASWSD 2006: Model-Driven Development of Reliable Automotive Services</i>, edited by Manfred Broy, Ingolf H. Krüger, and Michael Meisinger, 98–117. Berlin, Heidelberg: Springer Verlag, 2008. <a href=\"https://doi.org/10.1007/978-3-540-70930-5_7\">https://doi.org/10.1007/978-3-540-70930-5_7</a>.","mla":"Großmann, Jürgen, et al. “TestML – A Test Exchange Language for Model-Based Testing of Embedded Software.” <i>ASWSD 2006: Model-Driven Development of Reliable Automotive Services</i>, edited by Manfred Broy et al., Springer Verlag, 2008, pp. 98–117, doi:<a href=\"https://doi.org/10.1007/978-3-540-70930-5_7\">10.1007/978-3-540-70930-5_7</a>.","bibtex":"@inbook{Großmann_Fey_Krupp_Conrad_Wewetzer_Müller_2008, place={Berlin, Heidelberg}, title={TestML – A Test Exchange Language for Model-based Testing of Embedded Software}, DOI={<a href=\"https://doi.org/10.1007/978-3-540-70930-5_7\">10.1007/978-3-540-70930-5_7</a>}, booktitle={ASWSD 2006: Model-Driven Development of Reliable Automotive Services}, publisher={Springer Verlag}, author={Großmann, Jürgen and Fey, Ines and Krupp, Alexander and Conrad, Mirko and Wewetzer, Christian and Müller, Wolfgang}, editor={Broy, Manfred and Krüger, Ingolf H. and Meisinger, Michael}, year={2008}, pages={98–117} }","ama":"Großmann J, Fey I, Krupp A, Conrad M, Wewetzer C, Müller W. TestML – A Test Exchange Language for Model-based Testing of Embedded Software. In: Broy M, Krüger IH, Meisinger M, eds. <i>ASWSD 2006: Model-Driven Development of Reliable Automotive Services</i>. Springer Verlag; 2008:98-117. doi:<a href=\"https://doi.org/10.1007/978-3-540-70930-5_7\">10.1007/978-3-540-70930-5_7</a>"},"language":[{"iso":"eng"}],"doi":"10.1007/978-3-540-70930-5_7","publication_identifier":{"isbn":["978-3-540-70929-9"]},"author":[{"first_name":"Jürgen","last_name":"Großmann","full_name":"Großmann, Jürgen"},{"full_name":"Fey, Ines","last_name":"Fey","first_name":"Ines"},{"full_name":"Krupp, Alexander","last_name":"Krupp","first_name":"Alexander"},{"full_name":"Conrad, Mirko","last_name":"Conrad","first_name":"Mirko"},{"last_name":"Wewetzer","first_name":"Christian","full_name":"Wewetzer, Christian"},{"full_name":"Müller, Wolfgang","first_name":"Wolfgang","last_name":"Müller","id":"16243"}],"year":"2008","title":"TestML – A Test Exchange Language for Model-based Testing of Embedded Software","date_updated":"2022-10-18T11:20:02Z","date_created":"2022-10-18T11:19:31Z","department":[{"_id":"672"}],"type":"book_chapter","keyword":["Test Behavior","Test Exchange","System Under Test","Hybrid Automaton","Test Execution"],"publication":"ASWSD 2006: Model-Driven Development of Reliable Automotive Services","abstract":[{"lang":"eng","text":"Test processes in the automotive industry are tool-intensive and affected by technologically heterogeneous test infrastructures. In the industrial practice a product has to pass tests at several levels of abstraction such as Model-in-the-Loop (MIL), Software-in-the-Loop (SIL) and Hardware-in-the-Loop (HIL) tests. Different test systems are applied for this purpose (e.g. dSPACE MTest, dSPACE Automation Desk, National Instruments Teststand) and almost each test system requests its own proprietary test description language. The exchange of tests between different test systems and the reuse of tests between different test levels is normally not possible. Efforts to integrate these heterogeneous test environments, to address test exchange in a general manner and to standardize and harmonize the existing language environment are still at the beginning and not tailored towards the requirements of the automotive domain. To keep the whole development and test process efficient and manageable, the definition of an integrated and seamless approach is required. TestML – the test exchange language we present in this article – is defined to overcome the technological obstacles (different test language syntax and semantics, different data formats and interface descriptions) that almost automatically accompany the application of heterogeneous test tools and test infrastructures. TestML supports the exchange of tests between different test notations in a heterogeneous tool environment. In this paper, we introduce the XML schema of TestML and demonstrate the efficiency of the interchange format by giving examples from the model-based development of electronic control units. Tool support is illustrated by an application with Simulink/Stateflow."}]},{"type":"conference","department":[{"_id":"9"},{"_id":"149"},{"_id":"321"}],"date_created":"2022-10-26T07:05:04Z","publication":"Ein wesentlicher Beitrag zur Klimadebatte","citation":{"ieee":"T. Tröster, W. Rostek, J. Böke, and R. Erhardt, “Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau,” in <i>Ein wesentlicher Beitrag zur Klimadebatte</i>, Berlin, 2008, vol. 675.","apa":"Tröster, T., Rostek, W., Böke, J., &#38; Erhardt, R. (2008). Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau. In DVM (Ed.), <i>Ein wesentlicher Beitrag zur Klimadebatte</i> (Vol. 675).","short":"T. Tröster, W. Rostek, J. Böke, R. Erhardt, in: DVM (Ed.), Ein wesentlicher Beitrag zur Klimadebatte, 2008.","chicago":"Tröster, Thomas, W. Rostek, J. Böke, and R. Erhardt. “Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau.” In <i>Ein wesentlicher Beitrag zur Klimadebatte</i>, edited by DVM, Vol. 675. DVM-Bericht, 2008.","mla":"Tröster, Thomas, et al. “Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau.” <i>Ein wesentlicher Beitrag zur Klimadebatte</i>, edited by DVM, vol. 675, 2008.","bibtex":"@inproceedings{Tröster_Rostek_Böke_Erhardt_2008, series={DVM-Bericht}, title={Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau}, volume={675}, booktitle={Ein wesentlicher Beitrag zur Klimadebatte}, author={Tröster, Thomas and Rostek, W. and Böke, J. and Erhardt, R.}, editor={DVM}, year={2008}, collection={DVM-Bericht} }","ama":"Tröster T, Rostek W, Böke J, Erhardt R. Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau. In: DVM, ed. <i>Ein wesentlicher Beitrag zur Klimadebatte</i>. Vol 675. DVM-Bericht. ; 2008."},"user_id":"15952","volume":675,"language":[{"iso":"ger"}],"_id":"33878","series_title":"DVM-Bericht","date_updated":"2022-10-26T07:05:19Z","publication_status":"published","intvolume":"       675","status":"public","year":"2008","title":"Einsatz von Simulationswerkzeugen in der Entwicklungskette von ultrahochfesten warmgeformten Strukturkomponenten im Fahrzeugleichtbau","conference":{"start_date":"2008-04-23","name":"DVM-Tag 2008 Leichtbaustrategien,","location":"Berlin","end_date":"2008-04-25"},"author":[{"last_name":"Tröster","first_name":"Thomas","full_name":"Tröster, Thomas","id":"553"},{"last_name":"Rostek","first_name":"W.","full_name":"Rostek, W."},{"full_name":"Böke, J.","first_name":"J.","last_name":"Böke"},{"last_name":"Erhardt","first_name":"R.","full_name":"Erhardt, R."}],"corporate_editor":["DVM"]},{"extern":"1","citation":{"apa":"Magyar, B., &#38; Horák, P. (2008). <i>Geometrical modeling and investigation of the contact relations of spatial gears</i>. G-2008-A-12.","ieee":"B. Magyar and P. Horák, “Geometrical modeling and investigation of the contact relations of spatial gears,” 2008, p. G-2008-A-12.","chicago":"Magyar, Balázs, and P Horák. “Geometrical Modeling and Investigation of the Contact Relations of Spatial Gears,” G-2008-A-12, 2008.","short":"B. Magyar, P. Horák, in: 2008, p. G-2008-A-12.","mla":"Magyar, Balázs, and P. Horák. <i>Geometrical Modeling and Investigation of the Contact Relations of Spatial Gears</i>. 2008, p. G-2008-A-12.","ama":"Magyar B, Horák P. Geometrical modeling and investigation of the contact relations of spatial gears. In: ; 2008:G-2008-A-12.","bibtex":"@inproceedings{Magyar_Horák_2008, title={Geometrical modeling and investigation of the contact relations of spatial gears}, author={Magyar, Balázs and Horák, P}, year={2008}, pages={G-2008-A-12} }"},"department":[{"_id":"146"}],"type":"conference","date_created":"2023-01-05T11:54:06Z","date_updated":"2023-01-05T11:54:19Z","author":[{"first_name":"Balázs","last_name":"Magyar","full_name":"Magyar, Balázs","id":"97759"},{"last_name":"Horák","first_name":"P","full_name":"Horák, P"}],"publication_identifier":{"isbn":["978-963-420-947-8"]},"conference":{"name":"GÉPÉSZET 2008"},"title":"Geometrical modeling and investigation of the contact relations of spatial gears","status":"public","year":"2008","user_id":"38077","language":[{"iso":"eng"}],"_id":"35275","page":"G-2008-A-12"},{"date_created":"2023-01-05T12:13:11Z","department":[{"_id":"146"}],"type":"journal_article","citation":{"ama":"Magyar B, Horák P. Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den Räumlichenverzahnungen. <i>GÉP</i>. 2008;LIX(4):28-30.","bibtex":"@article{Magyar_Horák_2008, title={Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den Räumlichenverzahnungen}, volume={LIX}, number={4}, journal={GÉP}, author={Magyar Balázs and Horák P}, year={2008}, pages={28–30} }","mla":"Magyar Balázs, and Horák P. “Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den Räumlichenverzahnungen.” <i>GÉP</i>, vol. LIX, no. 4, 2008, pp. 28–30.","short":"Magyar B., Horák P., GÉP LIX (2008) 28–30.","chicago":"Magyar Balázs, and Horák P. “Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den Räumlichenverzahnungen.” <i>GÉP</i> LIX, no. 4 (2008): 28–30.","apa":"Magyar B., &#38; Horák P. (2008). Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den Räumlichenverzahnungen. <i>GÉP</i>, <i>LIX</i>(4), 28–30.","ieee":"Magyar B. and Horák P., “Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den Räumlichenverzahnungen,” <i>GÉP</i>, vol. LIX, no. 4, pp. 28–30, 2008."},"publication":"GÉP","issue":"4","extern":"1","_id":"35283","language":[{"iso":"hun"}],"page":"28-30","alternative_title":["Térbeli hajtások geometriai modellezése és az érintkezési viszonyainak vizsgálata"],"volume":"LIX","user_id":"38077","author":[{"id":"97759","last_name":"Magyar","first_name":"Balázs","full_name":"Magyar, Balázs"},{"full_name":"Horák, P","last_name":"Horák","first_name":"P"}],"status":"public","title":"Geometrische Modellierung und Untersuchung der Berührungsverhältnisse bei den Räumlichenverzahnungen","year":"2008","date_updated":"2023-01-05T12:13:55Z"},{"citation":{"ieee":"Magyar B. and Horák P., “Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen,” <i>GÉP</i>, vol. LIX, no. 10–11, pp. 44–47, 2008.","apa":"Magyar B., &#38; Horák P. (2008). Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen. <i>GÉP</i>, <i>LIX</i>(10–11), 44–47.","short":"Magyar B., Horák P., GÉP LIX (2008) 44–47.","chicago":"Magyar Balázs, and Horák P. “Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen.” <i>GÉP</i> LIX, no. 10–11 (2008): 44–47.","mla":"Magyar Balázs, and Horák P. “Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen.” <i>GÉP</i>, vol. LIX, no. 10–11, 2008, pp. 44–47.","bibtex":"@article{Magyar_Horák_2008, title={Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen}, volume={LIX}, number={10–11}, journal={GÉP}, author={Magyar Balázs and Horák P}, year={2008}, pages={44–47} }","ama":"Magyar B, Horák P. Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen. <i>GÉP</i>. 2008;LIX(10-11):44-47."},"publication":"GÉP","issue":"10-11","extern":"1","date_created":"2023-01-05T12:10:42Z","department":[{"_id":"146"}],"type":"journal_article","author":[{"id":"97759","full_name":"Magyar, Balázs","first_name":"Balázs","last_name":"Magyar"},{"full_name":"Horák, P","first_name":"P","last_name":"Horák"}],"publication_identifier":{"issn":["0016-8572"]},"year":"2008","status":"public","title":"Modellierung der Berührungsverhältnisse von Hohflanken-Schneckenradsätzen","date_updated":"2023-01-05T12:13:31Z","language":[{"iso":"hun"}],"_id":"35282","page":"44-47","alternative_title":["Körívprofilú csigahajtópárok érintkezési viszonyainak modellezése"],"volume":"LIX","user_id":"38077"},{"user_id":"49063","page":"886-893","language":[{"iso":"ger"}],"_id":"47758","date_updated":"2023-10-05T20:18:23Z","publication_status":"published","title":"Zyklik. Über die Erwartbarkeit des Neuen","status":"public","year":"2008","author":[{"full_name":"Bartz, Christina","last_name":"Bartz","first_name":"Christina","id":"21546"},{"full_name":"Werber, Niels","first_name":"Niels","last_name":"Werber"}],"type":"journal_article","department":[{"_id":"416"}],"date_created":"2023-10-05T20:17:36Z","extern":"1","publication":"Merkur. Deutsche Zeitschrift für Europäisches Denken. Sonderheft: Neugier. Vom europäischen Denken H. 9/10","citation":{"chicago":"Bartz, Christina, and Niels Werber. “Zyklik. Über die Erwartbarkeit des Neuen.” <i>Merkur. Deutsche Zeitschrift für Europäisches Denken. Sonderheft: Neugier. Vom europäischen Denken H. 9/10</i>, 2008, 886–93.","ama":"Bartz C, Werber N. Zyklik. Über die Erwartbarkeit des Neuen. <i>Merkur Deutsche Zeitschrift für Europäisches Denken Sonderheft: Neugier Vom europäischen Denken H 9/10</i>. Published online 2008:886-893.","short":"C. Bartz, N. Werber, Merkur. Deutsche Zeitschrift für Europäisches Denken. Sonderheft: Neugier. Vom europäischen Denken H. 9/10 (2008) 886–893.","bibtex":"@article{Bartz_Werber_2008, title={Zyklik. Über die Erwartbarkeit des Neuen}, journal={Merkur. Deutsche Zeitschrift für Europäisches Denken. Sonderheft: Neugier. Vom europäischen Denken H. 9/10}, author={Bartz, Christina and Werber, Niels}, year={2008}, pages={886–893} }","mla":"Bartz, Christina, and Niels Werber. “Zyklik. Über die Erwartbarkeit des Neuen.” <i>Merkur. Deutsche Zeitschrift für Europäisches Denken. Sonderheft: Neugier. Vom europäischen Denken H. 9/10</i>, 2008, pp. 886–93.","apa":"Bartz, C., &#38; Werber, N. (2008). Zyklik. Über die Erwartbarkeit des Neuen. <i>Merkur. Deutsche Zeitschrift für Europäisches Denken. Sonderheft: Neugier. Vom europäischen Denken H. 9/10</i>, 886–893.","ieee":"C. Bartz and N. Werber, “Zyklik. Über die Erwartbarkeit des Neuen,” <i>Merkur. Deutsche Zeitschrift für Europäisches Denken. Sonderheft: Neugier. Vom europäischen Denken H. 9/10</i>, pp. 886–893, 2008."}}]