[{"publisher":"MDPI AG","date_created":"2024-08-23T06:47:27Z","title":"Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure","quality_controlled":"1","issue":"8","year":"2024","keyword":["CFRP","prestressing","fibre metal laminate","interface","prepreg","shear tensile test"],"language":[{"iso":"eng"}],"publication":"Journal of Composites Science","abstract":[{"text":"The use of hybrid materials as a combination of fibre-reinforced plastic (FRP) and metal is of great interest in order to meet the increasing demands for sustainability, efficiency, and emission reduction based on the principle of lightweight design. These two components can therefore be joined using the intrinsic joining technique, which is formed by curing the matrix of the FRP component. In this study, for the hybrid joint, unidirectionally pre-impregnated semi-finished products (prepregs) with duromer matrix resin and micro-alloyed HC340LA steel were used. In order to conduct a detailed investigation, the damage mechanisms of intrinsically produced fibre metal laminates (FMLs), a new clamping device, and a novel pressing tool were designed and put into operation. The prepregs were prestressed by applying a preloading force using a specially designed prestressing frame. Hybrid specimens were then produced and subjected to nanoindentation and a shear tensile test. In particular, the effect of the residual stress state by varying the defined prestressing force on the damage mechanisms was studied. The results showed that no fracture patterns occurred in the interface of the specimens without preloading as a result of curing at 120 °C, whereas specimens with preloading failed at the boundary layer in the tensile range. Nevertheless, all specimens cured at 160 °C failed at the boundary layer in the tensile range. Furthermore, it was proven that the force and displacement of the preloaded specimens were promisingly higher than those of the unpreloaded specimens.","lang":"eng"}],"date_updated":"2026-03-23T10:31:09Z","author":[{"first_name":"Hayrettin","orcid":"https://orcid.org/0009-0009-6267-2957","last_name":"Irmak","id":"75657","full_name":"Irmak, Hayrettin"},{"first_name":"Steffen Rainer","last_name":"Tinkloh","full_name":"Tinkloh, Steffen Rainer","id":"72722"},{"id":"338","full_name":"Marten, Thorsten","last_name":"Marten","orcid":"0009-0001-6433-7839","first_name":"Thorsten"},{"first_name":"Thomas","id":"553","full_name":"Tröster, Thomas","last_name":"Tröster"}],"volume":8,"doi":"10.3390/jcs8080316","publication_status":"published","publication_identifier":{"issn":["2504-477X"]},"citation":{"ama":"Irmak H, Tinkloh SR, Marten T, Tröster T. Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. <i>Journal of Composites Science</i>. 2024;8(8). doi:<a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>","ieee":"H. Irmak, S. R. Tinkloh, T. Marten, and T. Tröster, “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure,” <i>Journal of Composites Science</i>, vol. 8, no. 8, Art. no. 316, 2024, doi: <a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>.","chicago":"Irmak, Hayrettin, Steffen Rainer Tinkloh, Thorsten Marten, and Thomas Tröster. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” <i>Journal of Composites Science</i> 8, no. 8 (2024). <a href=\"https://doi.org/10.3390/jcs8080316\">https://doi.org/10.3390/jcs8080316</a>.","short":"H. Irmak, S.R. Tinkloh, T. Marten, T. Tröster, Journal of Composites Science 8 (2024).","mla":"Irmak, Hayrettin, et al. “Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure.” <i>Journal of Composites Science</i>, vol. 8, no. 8, 316, MDPI AG, 2024, doi:<a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>.","bibtex":"@article{Irmak_Tinkloh_Marten_Tröster_2024, title={Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure}, volume={8}, DOI={<a href=\"https://doi.org/10.3390/jcs8080316\">10.3390/jcs8080316</a>}, number={8316}, journal={Journal of Composites Science}, publisher={MDPI AG}, author={Irmak, Hayrettin and Tinkloh, Steffen Rainer and Marten, Thorsten and Tröster, Thomas}, year={2024} }","apa":"Irmak, H., Tinkloh, S. R., Marten, T., &#38; Tröster, T. (2024). Development of a Tool Concept for Prestressed Fibre Metal Laminates and Their Effect on Interface Failure. <i>Journal of Composites Science</i>, <i>8</i>(8), Article 316. <a href=\"https://doi.org/10.3390/jcs8080316\">https://doi.org/10.3390/jcs8080316</a>"},"intvolume":"         8","_id":"55743","user_id":"338","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"article_number":"316","article_type":"original","type":"journal_article","status":"public"},{"user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"_id":"65119","language":[{"iso":"eng"}],"type":"conference","status":"public","date_created":"2026-03-25T09:43:51Z","author":[{"first_name":"Volker","last_name":"Schöppner","id":"20530","full_name":"Schöppner, Volker"},{"first_name":"Theresa","id":"45302","full_name":"Arndt, Theresa","last_name":"Arndt"}],"date_updated":"2026-03-25T09:43:55Z","title":"Experimental investigations on anvil-free ultrasonic welding for welding situations with one sided access","citation":{"bibtex":"@inproceedings{Schöppner_Arndt_2024, title={Experimental investigations on anvil-free ultrasonic welding for welding situations with one sided access}, author={Schöppner, Volker and Arndt, Theresa}, editor={77th Annual Assembly of the International Institute of Welding (IIW)}, year={2024} }","short":"V. Schöppner, T. Arndt, in: 77th Annual Assembly of the International Institute of Welding (IIW) (Ed.), 2024.","mla":"Schöppner, Volker, and Theresa Arndt. <i>Experimental Investigations on Anvil-Free Ultrasonic Welding for Welding Situations with One Sided Access</i>. Edited by 77th Annual Assembly of the International Institute of Welding (IIW), 2024.","apa":"Schöppner, V., &#38; Arndt, T. (2024). <i>Experimental investigations on anvil-free ultrasonic welding for welding situations with one sided access</i> (77th Annual Assembly of the International Institute of Welding (IIW), Ed.).","chicago":"Schöppner, Volker, and Theresa Arndt. “Experimental Investigations on Anvil-Free Ultrasonic Welding for Welding Situations with One Sided Access.” edited by 77th Annual Assembly of the International Institute of Welding (IIW), 2024.","ieee":"V. Schöppner and T. Arndt, “Experimental investigations on anvil-free ultrasonic welding for welding situations with one sided access,” 2024.","ama":"Schöppner V, Arndt T. Experimental investigations on anvil-free ultrasonic welding for welding situations with one sided access. In: 77th Annual Assembly of the International Institute of Welding (IIW), ed. ; 2024."},"corporate_editor":["77th Annual Assembly of the International Institute of Welding (IIW)"],"year":"2024"},{"date_created":"2026-03-25T10:47:04Z","publisher":"VDI Verlag","date_updated":"2026-03-25T10:48:52Z","doi":"10.51202/9783181024324","title":"Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme","publication_identifier":{"isbn":["9783181024324"]},"publication_status":"published","citation":{"mla":"Moritzer, Elmar, et al., editors. <i>Entwicklung Einer Analytischen Berechnungsmethode Zur Auslegung Thermoplastischer Flanschsysteme</i>. VDI Verlag, 2024, doi:<a href=\"https://doi.org/10.51202/9783181024324\">10.51202/9783181024324</a>.","short":"E. Moritzer, F. Bartmann, A. Riedl, eds., Entwicklung Einer Analytischen Berechnungsmethode Zur Auslegung Thermoplastischer Flanschsysteme, VDI Verlag, 2024.","bibtex":"@book{Moritzer_Bartmann_Riedl_2024, title={Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme}, DOI={<a href=\"https://doi.org/10.51202/9783181024324\">10.51202/9783181024324</a>}, publisher={VDI Verlag}, year={2024} }","apa":"Moritzer, E., Bartmann, F., &#38; Riedl, A. (Eds.). (2024). <i>Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme</i>. VDI Verlag. <a href=\"https://doi.org/10.51202/9783181024324\">https://doi.org/10.51202/9783181024324</a>","ama":"Moritzer E, Bartmann F, Riedl A, eds. <i>Entwicklung Einer Analytischen Berechnungsmethode Zur Auslegung Thermoplastischer Flanschsysteme</i>. VDI Verlag; 2024. doi:<a href=\"https://doi.org/10.51202/9783181024324\">10.51202/9783181024324</a>","ieee":"E. Moritzer, F. Bartmann, and A. Riedl, Eds., <i>Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme</i>. VDI Verlag, 2024.","chicago":"Moritzer, Elmar, Finn Bartmann, and Alexander Riedl, eds. <i>Entwicklung Einer Analytischen Berechnungsmethode Zur Auslegung Thermoplastischer Flanschsysteme</i>. VDI Verlag, 2024. <a href=\"https://doi.org/10.51202/9783181024324\">https://doi.org/10.51202/9783181024324</a>."},"year":"2024","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","_id":"65123","language":[{"iso":"eng"}],"alternative_title":["Stand - Konzepte - Fortschritte"],"type":"book_editor","status":"public","editor":[{"first_name":"Elmar","id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer"},{"full_name":"Bartmann, Finn","last_name":"Bartmann","first_name":"Finn"},{"last_name":"Riedl","full_name":"Riedl, Alexander","first_name":"Alexander"}],"abstract":[{"text":"<p> Inhalt Aktuelle rechtliche Rahmenbedingungen TA Luft – Wesentliche Änderungen, Herausforderungen, Konsequenzen in der Praxis und laufende Aktivitäten 1 Die Lösungsmittelbilanz bei VOC Anlagen als Nachweis der Einhaltung des Grenzwertes für diffuse Emissionen The solvent mass balance for VOC installations as verification of compliance with the limit value for fugitive emissions 11 Diffuse Emissionen Dichte Flanschverbindungen – Richtlinie VDI 2290 23 Technik zur Vermeidung und Verminderung von diffusen Emissionen – Regel- und Absperrarmaturen 37 Erstellung der Lösungsmittelbilanz im Kontext der 31. BImSchV – Rechtliche Anforderungen, praktische Herausforderungen und Unsicherheiten Preparation of the solvent balance in the context of the 31. BImSchV - legal requirements, practical challenges and uncertainties 45 Entwicklung einer analytischen Berechnungsmethode zur Auslegung thermoplastischer Flanschsysteme 61 VKA Control - Bewertung von Legionellenemissionen aus Verdunstungskühlanlagen: Neue Erkenntnisse und Methoden 71 Verbrennungsführung und Minderung organischer Emissionen 27. BImSchV versus Klimaschut... </p>","lang":"eng"}]},{"publication_status":"published","citation":{"apa":"Bartmann, F., Riedl, A., &#38; Moritzer, E. (2024). Development of an analytical calculation method for the design of thermoplastic flange systems. <i>22nd International Sealing Conference 2024</i>. <a href=\"https://doi.org/10.61319/pqdsdeu6\">https://doi.org/10.61319/pqdsdeu6</a>","ama":"Bartmann F, Riedl A, Moritzer E. Development of an analytical calculation method for the design of thermoplastic flange systems. In: <i>22nd International Sealing Conference 2024</i>. VDMA Fluidtechnik; 2024. doi:<a href=\"https://doi.org/10.61319/pqdsdeu6\">10.61319/pqdsdeu6</a>","bibtex":"@inproceedings{Bartmann_Riedl_Moritzer_2024, title={Development of an analytical calculation method for the design of thermoplastic flange systems}, DOI={<a href=\"https://doi.org/10.61319/pqdsdeu6\">10.61319/pqdsdeu6</a>}, booktitle={22nd International Sealing Conference 2024}, publisher={VDMA Fluidtechnik}, author={Bartmann, Finn and Riedl, Alexander and Moritzer, Elmar}, year={2024} }","short":"F. Bartmann, A. Riedl, E. Moritzer, in: 22nd International Sealing Conference 2024, VDMA Fluidtechnik, 2024.","mla":"Bartmann, Finn, et al. “Development of an Analytical Calculation Method for the Design of Thermoplastic Flange Systems.” <i>22nd International Sealing Conference 2024</i>, VDMA Fluidtechnik, 2024, doi:<a href=\"https://doi.org/10.61319/pqdsdeu6\">10.61319/pqdsdeu6</a>.","chicago":"Bartmann, Finn, Alexander Riedl, and Elmar Moritzer. “Development of an Analytical Calculation Method for the Design of Thermoplastic Flange Systems.” In <i>22nd International Sealing Conference 2024</i>. VDMA Fluidtechnik, 2024. <a href=\"https://doi.org/10.61319/pqdsdeu6\">https://doi.org/10.61319/pqdsdeu6</a>.","ieee":"F. Bartmann, A. Riedl, and E. Moritzer, “Development of an analytical calculation method for the design of thermoplastic flange systems,” 2024, doi: <a href=\"https://doi.org/10.61319/pqdsdeu6\">10.61319/pqdsdeu6</a>."},"year":"2024","author":[{"last_name":"Bartmann","full_name":"Bartmann, Finn","first_name":"Finn"},{"first_name":"Alexander","full_name":"Riedl, Alexander","last_name":"Riedl"},{"id":"20531","full_name":"Moritzer, Elmar","last_name":"Moritzer","first_name":"Elmar"}],"date_created":"2026-03-25T10:49:06Z","date_updated":"2026-03-25T10:49:39Z","publisher":"VDMA Fluidtechnik","doi":"10.61319/pqdsdeu6","title":"Development of an analytical calculation method for the design of thermoplastic flange systems","type":"conference","publication":"22nd International Sealing Conference 2024","status":"public","abstract":[{"text":"<jats:p>\"In the course of environmental protection and the amendment of TA Luft, emissions from flange connections must be reduced (to L0.01). The design and calculation of steel flanges is easy to handle with the help of EN 1591-1 and EN 13555. However, these standards are not suitable in their current form for thermoplastic sealing joints, such as those used in natural gas supply. For this reason, lengthy and cost-intensive tests must currently be carried out to verify tightness and strength. The aim of a doctoral project is to develop a time-efficient and cost-effective analytical calculation method based on the existing standards. For this purpose, the energy-elastic material parameters of the steel must be replaced by elastoplastic material parameters of the thermoplastics and the calculation algorithm adapted accordingly. The problem is to be investigated with the aid of numerical structural simulations (FEM) and experimental tests.\"</jats:p>","lang":"eng"}],"user_id":"59363","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"_id":"65125","language":[{"iso":"eng"}]},{"publication":"DVS Plenarsitzung AG W4 Fügen von Kunststoffen","type":"conference_abstract","status":"public","_id":"59159","department":[{"_id":"9"},{"_id":"321"},{"_id":"367"}],"user_id":"59363","language":[{"iso":"eng"}],"place":"Würzburg","year":"2024","citation":{"ieee":"E. Moritzer and C. Held, “Direktverschraubung additiv gefertigter Kunststoffbauteile,” 2024.","chicago":"Moritzer, Elmar, and Christian Held. “Direktverschraubung Additiv Gefertigter Kunststoffbauteile.” In <i>DVS Plenarsitzung AG W4 Fügen von Kunststoffen</i>. Würzburg: DVS, 2024.","ama":"Moritzer E, Held C. Direktverschraubung additiv gefertigter Kunststoffbauteile. In: <i>DVS Plenarsitzung AG W4 Fügen von Kunststoffen</i>. DVS; 2024.","apa":"Moritzer, E., &#38; Held, C. (2024). Direktverschraubung additiv gefertigter Kunststoffbauteile. <i>DVS Plenarsitzung AG W4 Fügen von Kunststoffen</i>.","mla":"Moritzer, Elmar, and Christian Held. “Direktverschraubung Additiv Gefertigter Kunststoffbauteile.” <i>DVS Plenarsitzung AG W4 Fügen von Kunststoffen</i>, DVS, 2024.","bibtex":"@inproceedings{Moritzer_Held_2024, place={Würzburg}, title={Direktverschraubung additiv gefertigter Kunststoffbauteile}, booktitle={DVS Plenarsitzung AG W4 Fügen von Kunststoffen}, publisher={DVS}, author={Moritzer, Elmar and Held, Christian}, year={2024} }","short":"E. Moritzer, C. Held, in: DVS Plenarsitzung AG W4 Fügen von Kunststoffen, DVS, Würzburg, 2024."},"publisher":"DVS","date_updated":"2026-03-25T12:00:52Z","author":[{"first_name":"Elmar","full_name":"Moritzer, Elmar","id":"20531","last_name":"Moritzer"},{"last_name":"Held","id":"40647","full_name":"Held, Christian","first_name":"Christian"}],"date_created":"2025-03-26T15:47:36Z","title":"Direktverschraubung additiv gefertigter Kunststoffbauteile"},{"date_updated":"2026-03-31T02:42:32Z","publisher":"IEEE","oa":"1","date_created":"2024-11-21T10:25:35Z","author":[{"first_name":"Ioannis","full_name":"Safranoglou, Ioannis","last_name":"Safranoglou"},{"last_name":"Stavroulakis","full_name":"Stavroulakis, Alexis","first_name":"Alexis"},{"first_name":"Jens","id":"405","full_name":"Pottebaum, Jens","last_name":"Pottebaum","orcid":"http://orcid.org/0000-0001-8778-2989"},{"orcid":"https://orcid.org/0009-0007-5400-4436","last_name":"Ebel","full_name":"Ebel, Marcel","id":"81788","first_name":"Marcel"},{"first_name":"Georgios","last_name":"Lamprinakis","full_name":"Lamprinakis, Georgios"},{"full_name":"Dimelli, Despina","last_name":"Dimelli","first_name":"Despina"},{"full_name":"Mania, Katerina","last_name":"Mania","first_name":"Katerina"}],"title":"Augmented Reality for Real-Time Decision-Making in Flood Emergencies","main_file_link":[{"open_access":"1","url":"https://ieeexplore.ieee.org/abstract/document/10765130"}],"conference":{"name":"2024 IEEE International Symposium on Mixed and Augmented Reality"},"doi":"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032","quality_controlled":"1","year":"2024","citation":{"chicago":"Safranoglou, Ioannis, Alexis Stavroulakis, Jens Pottebaum, Marcel Ebel, Georgios Lamprinakis, Despina Dimelli, and Katerina Mania. “Augmented Reality for Real-Time Decision-Making in Flood Emergencies.” In <i>2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)</i>. IEEE, 2024. <a href=\"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032\">https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032</a>.","ieee":"I. Safranoglou <i>et al.</i>, “Augmented Reality for Real-Time Decision-Making in Flood Emergencies,” presented at the 2024 IEEE International Symposium on Mixed and Augmented Reality, 2024, doi: <a href=\"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032\">https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032</a>.","ama":"Safranoglou I, Stavroulakis A, Pottebaum J, et al. Augmented Reality for Real-Time Decision-Making in Flood Emergencies. In: <i>2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)</i>. IEEE; 2024. doi:<a href=\"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032\">https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032</a>","apa":"Safranoglou, I., Stavroulakis, A., Pottebaum, J., Ebel, M., Lamprinakis, G., Dimelli, D., &#38; Mania, K. (2024). Augmented Reality for Real-Time Decision-Making in Flood Emergencies. <i>2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)</i>. 2024 IEEE International Symposium on Mixed and Augmented Reality. <a href=\"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032\">https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032</a>","short":"I. Safranoglou, A. Stavroulakis, J. Pottebaum, M. Ebel, G. Lamprinakis, D. Dimelli, K. Mania, in: 2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct), IEEE, 2024.","bibtex":"@inproceedings{Safranoglou_Stavroulakis_Pottebaum_Ebel_Lamprinakis_Dimelli_Mania_2024, title={Augmented Reality for Real-Time Decision-Making in Flood Emergencies}, DOI={<a href=\"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032\">https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032</a>}, booktitle={2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)}, publisher={IEEE}, author={Safranoglou, Ioannis and Stavroulakis, Alexis and Pottebaum, Jens and Ebel, Marcel and Lamprinakis, Georgios and Dimelli, Despina and Mania, Katerina}, year={2024} }","mla":"Safranoglou, Ioannis, et al. “Augmented Reality for Real-Time Decision-Making in Flood Emergencies.” <i>2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)</i>, IEEE, 2024, doi:<a href=\"https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032\">https://doi.org/10.1109/ISMAR-Adjunct64951.2024.00032</a>."},"project":[{"name":"CREXDATA: CREXDATA: Kritische Maßnahmenplanung über extreme Datenmengen","_id":"516"}],"_id":"57309","user_id":"405","department":[{"_id":"152"}],"language":[{"iso":"eng"}],"type":"conference","publication":"2024 IEEE International Symposium on Mixed and Augmented Reality Adjunct (ISMAR-Adjunct)","status":"public"},{"language":[{"iso":"eng"}],"keyword":["Law","Electrical and Electronic Engineering","Computer Networks and Communications"],"department":[{"_id":"152"},{"_id":"76"},{"_id":"662"}],"user_id":"405","_id":"52587","status":"public","publication":"IEEE Security & Privacy","type":"journal_article","doi":"10.1109/msec.2023.3336028","main_file_link":[{"url":"https://ieeexplore.ieee.org/document/10411721"}],"title":"Evaluating Security Through Isolation and Defense in Depth","volume":22,"date_created":"2024-03-15T20:16:18Z","author":[{"orcid":"0000-0003-3470-3647","last_name":"Bodden","id":"59256","full_name":"Bodden, Eric","first_name":"Eric"},{"orcid":"http://orcid.org/0000-0001-8778-2989","last_name":"Pottebaum","full_name":"Pottebaum, Jens","id":"405","first_name":"Jens"},{"last_name":"Fockel","orcid":"0000-0002-1269-0702","id":"8472","full_name":"Fockel, Markus","first_name":"Markus"},{"last_name":"Gräßler","orcid":"0000-0001-5765-971X","id":"47565","full_name":"Gräßler, Iris","first_name":"Iris"}],"publisher":"Institute of Electrical and Electronics Engineers (IEEE)","date_updated":"2026-03-31T02:19:49Z","page":"69-72","intvolume":"        22","citation":{"ama":"Bodden E, Pottebaum J, Fockel M, Gräßler I. Evaluating Security Through Isolation and Defense in Depth. <i>IEEE Security &#38; Privacy</i>. 2024;22(1):69-72. doi:<a href=\"https://doi.org/10.1109/msec.2023.3336028\">10.1109/msec.2023.3336028</a>","chicago":"Bodden, Eric, Jens Pottebaum, Markus Fockel, and Iris Gräßler. “Evaluating Security Through Isolation and Defense in Depth.” <i>IEEE Security &#38; Privacy</i> 22, no. 1 (2024): 69–72. <a href=\"https://doi.org/10.1109/msec.2023.3336028\">https://doi.org/10.1109/msec.2023.3336028</a>.","ieee":"E. Bodden, J. Pottebaum, M. Fockel, and I. Gräßler, “Evaluating Security Through Isolation and Defense in Depth,” <i>IEEE Security &#38; Privacy</i>, vol. 22, no. 1, pp. 69–72, 2024, doi: <a href=\"https://doi.org/10.1109/msec.2023.3336028\">10.1109/msec.2023.3336028</a>.","bibtex":"@article{Bodden_Pottebaum_Fockel_Gräßler_2024, title={Evaluating Security Through Isolation and Defense in Depth}, volume={22}, DOI={<a href=\"https://doi.org/10.1109/msec.2023.3336028\">10.1109/msec.2023.3336028</a>}, number={1}, journal={IEEE Security &#38; Privacy}, publisher={Institute of Electrical and Electronics Engineers (IEEE)}, author={Bodden, Eric and Pottebaum, Jens and Fockel, Markus and Gräßler, Iris}, year={2024}, pages={69–72} }","short":"E. Bodden, J. Pottebaum, M. Fockel, I. Gräßler, IEEE Security &#38; Privacy 22 (2024) 69–72.","mla":"Bodden, Eric, et al. “Evaluating Security Through Isolation and Defense in Depth.” <i>IEEE Security &#38; Privacy</i>, vol. 22, no. 1, Institute of Electrical and Electronics Engineers (IEEE), 2024, pp. 69–72, doi:<a href=\"https://doi.org/10.1109/msec.2023.3336028\">10.1109/msec.2023.3336028</a>.","apa":"Bodden, E., Pottebaum, J., Fockel, M., &#38; Gräßler, I. (2024). Evaluating Security Through Isolation and Defense in Depth. <i>IEEE Security &#38; Privacy</i>, <i>22</i>(1), 69–72. <a href=\"https://doi.org/10.1109/msec.2023.3336028\">https://doi.org/10.1109/msec.2023.3336028</a>"},"year":"2024","issue":"1","quality_controlled":"1","publication_identifier":{"issn":["1540-7993","1558-4046"]},"publication_status":"published"},{"publication":"Nature Chemistry","type":"journal_article","status":"public","_id":"47589","department":[{"_id":"2"},{"_id":"389"}],"user_id":"53339","keyword":["General Chemical Engineering","General Chemistry"],"language":[{"iso":"eng"}],"publication_identifier":{"issn":["1755-4330","1755-4349"]},"publication_status":"published","year":"2023","citation":{"short":"F. Krämer, J. Paradies, I. Fernández, F. Breher, Nature Chemistry (2023).","bibtex":"@article{Krämer_Paradies_Fernández_Breher_2023, title={A crystalline aluminium–carbon-based ambiphile capable of activation and catalytic transfer of ammonia in non-aqueous media}, DOI={<a href=\"https://doi.org/10.1038/s41557-023-01340-9\">10.1038/s41557-023-01340-9</a>}, journal={Nature Chemistry}, publisher={Springer Science and Business Media LLC}, author={Krämer, Felix and Paradies, Jan and Fernández, Israel and Breher, Frank}, year={2023} }","mla":"Krämer, Felix, et al. “A Crystalline Aluminium–Carbon-Based Ambiphile Capable of Activation and Catalytic Transfer of Ammonia in Non-Aqueous Media.” <i>Nature Chemistry</i>, Springer Science and Business Media LLC, 2023, doi:<a href=\"https://doi.org/10.1038/s41557-023-01340-9\">10.1038/s41557-023-01340-9</a>.","apa":"Krämer, F., Paradies, J., Fernández, I., &#38; Breher, F. (2023). A crystalline aluminium–carbon-based ambiphile capable of activation and catalytic transfer of ammonia in non-aqueous media. <i>Nature Chemistry</i>. <a href=\"https://doi.org/10.1038/s41557-023-01340-9\">https://doi.org/10.1038/s41557-023-01340-9</a>","ama":"Krämer F, Paradies J, Fernández I, Breher F. A crystalline aluminium–carbon-based ambiphile capable of activation and catalytic transfer of ammonia in non-aqueous media. <i>Nature Chemistry</i>. Published online 2023. doi:<a href=\"https://doi.org/10.1038/s41557-023-01340-9\">10.1038/s41557-023-01340-9</a>","chicago":"Krämer, Felix, Jan Paradies, Israel Fernández, and Frank Breher. “A Crystalline Aluminium–Carbon-Based Ambiphile Capable of Activation and Catalytic Transfer of Ammonia in Non-Aqueous Media.” <i>Nature Chemistry</i>, 2023. <a href=\"https://doi.org/10.1038/s41557-023-01340-9\">https://doi.org/10.1038/s41557-023-01340-9</a>.","ieee":"F. Krämer, J. Paradies, I. Fernández, and F. Breher, “A crystalline aluminium–carbon-based ambiphile capable of activation and catalytic transfer of ammonia in non-aqueous media,” <i>Nature Chemistry</i>, 2023, doi: <a href=\"https://doi.org/10.1038/s41557-023-01340-9\">10.1038/s41557-023-01340-9</a>."},"publisher":"Springer Science and Business Media LLC","date_updated":"2023-10-04T14:41:12Z","date_created":"2023-10-04T14:40:07Z","author":[{"last_name":"Krämer","full_name":"Krämer, Felix","first_name":"Felix"},{"first_name":"Jan","id":"53339","full_name":"Paradies, Jan","last_name":"Paradies","orcid":"0000-0002-3698-668X"},{"first_name":"Israel","last_name":"Fernández","full_name":"Fernández, Israel"},{"first_name":"Frank","full_name":"Breher, Frank","last_name":"Breher"}],"title":"A crystalline aluminium–carbon-based ambiphile capable of activation and catalytic transfer of ammonia in non-aqueous media","doi":"10.1038/s41557-023-01340-9"},{"publication_identifier":{"isbn":["978-3-8376-6479-9"]},"publication_status":"inpress","citation":{"apa":"Bartz, C., Ruchatz, J., &#38; Wattolik, E. (Eds.). (n.d.). <i>Food - Media - Senses</i>. transcript.","bibtex":"@book{Bartz_Ruchatz_Wattolik, place={Bielefeld}, title={Food - Media - Senses}, publisher={transcript} }","mla":"Bartz, Christina, et al., editors. <i>Food - Media - Senses</i>. transcript.","short":"C. Bartz, J. Ruchatz, E. Wattolik, eds., Food - Media - Senses, transcript, Bielefeld, n.d.","ieee":"C. Bartz, J. Ruchatz, and E. Wattolik, Eds., <i>Food - Media - Senses</i>. Bielefeld: transcript.","chicago":"Bartz, Christina, Jens Ruchatz, and Eva Wattolik, eds. <i>Food - Media - Senses</i>. Bielefeld: transcript, n.d.","ama":"Bartz C, Ruchatz J, Wattolik E, eds. <i>Food - Media - Senses</i>. transcript"},"place":"Bielefeld","year":"2023","date_created":"2023-10-05T16:10:32Z","publisher":"transcript","date_updated":"2023-10-05T16:14:22Z","title":"Food - Media - Senses","type":"book_editor","status":"public","editor":[{"last_name":"Bartz","id":"21546","full_name":"Bartz, Christina","first_name":"Christina"},{"last_name":"Ruchatz","full_name":"Ruchatz, Jens","first_name":"Jens"},{"first_name":"Eva","last_name":"Wattolik","full_name":"Wattolik, Eva"}],"department":[{"_id":"416"}],"user_id":"49063","_id":"47676","language":[{"iso":"eng"}]},{"publication_identifier":{"isbn":["978-3-031-30229-9"]},"page":"411–425","citation":{"apa":"Prager, R. P., &#38; Trautmann, H. (2023). Nullifying the Inherent Bias of Non-invariant Exploratory Landscape Analysis Features. In J. Correia, S. Smith, &#38; R. Qaddoura (Eds.), <i>Applications of Evolutionary Computation</i> (pp. 411–425). Springer Nature Switzerland.","bibtex":"@inproceedings{Prager_Trautmann_2023, place={Cham}, title={Nullifying the Inherent Bias of Non-invariant Exploratory Landscape Analysis Features}, booktitle={Applications of Evolutionary Computation}, publisher={Springer Nature Switzerland}, author={Prager, Raphael Patrick and Trautmann, Heike}, editor={Correia, João and Smith, Stephen and Qaddoura, Raneem}, year={2023}, pages={411–425} }","short":"R.P. Prager, H. Trautmann, in: J. Correia, S. Smith, R. Qaddoura (Eds.), Applications of Evolutionary Computation, Springer Nature Switzerland, Cham, 2023, pp. 411–425.","mla":"Prager, Raphael Patrick, and Heike Trautmann. “Nullifying the Inherent Bias of Non-Invariant Exploratory Landscape Analysis Features.” <i>Applications of Evolutionary Computation</i>, edited by João Correia et al., Springer Nature Switzerland, 2023, pp. 411–425.","ama":"Prager RP, Trautmann H. Nullifying the Inherent Bias of Non-invariant Exploratory Landscape Analysis Features. In: Correia J, Smith S, Qaddoura R, eds. <i>Applications of Evolutionary Computation</i>. Springer Nature Switzerland; 2023:411–425.","chicago":"Prager, Raphael Patrick, and Heike Trautmann. “Nullifying the Inherent Bias of Non-Invariant Exploratory Landscape Analysis Features.” In <i>Applications of Evolutionary Computation</i>, edited by João Correia, Stephen Smith, and Raneem Qaddoura, 411–425. Cham: Springer Nature Switzerland, 2023.","ieee":"R. P. Prager and H. Trautmann, “Nullifying the Inherent Bias of Non-invariant Exploratory Landscape Analysis Features,” in <i>Applications of Evolutionary Computation</i>, 2023, pp. 411–425."},"place":"Cham","year":"2023","author":[{"full_name":"Prager, Raphael Patrick","last_name":"Prager","first_name":"Raphael Patrick"},{"first_name":"Heike","full_name":"Trautmann, Heike","id":"100740","last_name":"Trautmann","orcid":"0000-0002-9788-8282"}],"date_created":"2023-08-04T06:54:22Z","date_updated":"2023-10-16T12:36:45Z","publisher":"Springer Nature Switzerland","title":"Nullifying the Inherent Bias of Non-invariant Exploratory Landscape Analysis Features","publication":"Applications of Evolutionary Computation","type":"conference","status":"public","abstract":[{"text":"Exploratory landscape analysis (ELA) in single-objective black-box optimization relies on a comprehensive and large set of numerical features characterizing problem instances. Those foster problem understanding and serve as basis for constructing automated algorithm selection models choosing the best suited algorithm for a problem at hand based on the aforementioned features computed prior to optimization. This work specifically points to the sensitivity of a substantial proportion of these features to absolute objective values, i.e., we observe a lack of shift and scale invariance. We show that this unfortunately induces bias within automated algorithm selection models, an overfitting to specific benchmark problem sets used for training and thereby hinders generalization capabilities to unseen problems. We tackle these issues by presenting an appropriate objective normalization to be used prior to ELA feature computation and empirically illustrate the respective effectiveness focusing on the BBOB benchmark set.","lang":"eng"}],"editor":[{"full_name":"Correia, João","last_name":"Correia","first_name":"João"},{"last_name":"Smith","full_name":"Smith, Stephen","first_name":"Stephen"},{"last_name":"Qaddoura","full_name":"Qaddoura, Raneem","first_name":"Raneem"}],"department":[{"_id":"819"},{"_id":"34"}],"user_id":"15504","_id":"46297","language":[{"iso":"eng"}]},{"title":"Peak-A-Boo! Generating Multi-objective Multiple Peaks Benchmark Problems with Precise Pareto Sets","author":[{"first_name":"Lennart","full_name":"Schäpermeier, Lennart","last_name":"Schäpermeier"},{"first_name":"Pascal","full_name":"Kerschke, Pascal","last_name":"Kerschke"},{"last_name":"Grimme","full_name":"Grimme, Christian","first_name":"Christian"},{"first_name":"Heike","orcid":"0000-0002-9788-8282","last_name":"Trautmann","full_name":"Trautmann, Heike","id":"100740"}],"date_created":"2023-08-04T06:56:10Z","date_updated":"2023-10-16T12:36:17Z","publisher":"Springer Nature Switzerland","page":"291–304","citation":{"ieee":"L. Schäpermeier, P. Kerschke, C. Grimme, and H. Trautmann, “Peak-A-Boo! Generating Multi-objective Multiple Peaks Benchmark Problems with Precise Pareto Sets,” in <i>Evolutionary Multi-Criterion Optimization</i>, 2023, pp. 291–304.","chicago":"Schäpermeier, Lennart, Pascal Kerschke, Christian Grimme, and Heike Trautmann. “Peak-A-Boo! Generating Multi-Objective Multiple Peaks Benchmark Problems with Precise Pareto Sets.” In <i>Evolutionary Multi-Criterion Optimization</i>, edited by Michael Emmerich, André Deutz, Hao Wang, Anna V. Kononova, Boris Naujoks, Ke Li, Kaisa Miettinen, and Iryna Yevseyeva, 291–304. Cham: Springer Nature Switzerland, 2023.","ama":"Schäpermeier L, Kerschke P, Grimme C, Trautmann H. Peak-A-Boo! Generating Multi-objective Multiple Peaks Benchmark Problems with Precise Pareto Sets. In: Emmerich M, Deutz A, Wang H, et al., eds. <i>Evolutionary Multi-Criterion Optimization</i>. Springer Nature Switzerland; 2023:291–304.","apa":"Schäpermeier, L., Kerschke, P., Grimme, C., &#38; Trautmann, H. (2023). Peak-A-Boo! Generating Multi-objective Multiple Peaks Benchmark Problems with Precise Pareto Sets. In M. Emmerich, A. Deutz, H. Wang, A. V. Kononova, B. Naujoks, K. Li, K. Miettinen, &#38; I. Yevseyeva (Eds.), <i>Evolutionary Multi-Criterion Optimization</i> (pp. 291–304). Springer Nature Switzerland.","short":"L. Schäpermeier, P. Kerschke, C. Grimme, H. Trautmann, in: M. Emmerich, A. Deutz, H. Wang, A.V. Kononova, B. Naujoks, K. Li, K. Miettinen, I. Yevseyeva (Eds.), Evolutionary Multi-Criterion Optimization, Springer Nature Switzerland, Cham, 2023, pp. 291–304.","mla":"Schäpermeier, Lennart, et al. “Peak-A-Boo! Generating Multi-Objective Multiple Peaks Benchmark Problems with Precise Pareto Sets.” <i>Evolutionary Multi-Criterion Optimization</i>, edited by Michael Emmerich et al., Springer Nature Switzerland, 2023, pp. 291–304.","bibtex":"@inproceedings{Schäpermeier_Kerschke_Grimme_Trautmann_2023, place={Cham}, title={Peak-A-Boo! Generating Multi-objective Multiple Peaks Benchmark Problems with Precise Pareto Sets}, booktitle={Evolutionary Multi-Criterion Optimization}, publisher={Springer Nature Switzerland}, author={Schäpermeier, Lennart and Kerschke, Pascal and Grimme, Christian and Trautmann, Heike}, editor={Emmerich, Michael and Deutz, André and Wang, Hao and Kononova, Anna V. and Naujoks, Boris and Li, Ke and Miettinen, Kaisa and Yevseyeva, Iryna}, year={2023}, pages={291–304} }"},"year":"2023","place":"Cham","publication_identifier":{"isbn":["978-3-031-27250-9"]},"language":[{"iso":"eng"}],"department":[{"_id":"819"},{"_id":"34"}],"user_id":"15504","_id":"46298","status":"public","editor":[{"first_name":"Michael","last_name":"Emmerich","full_name":"Emmerich, Michael"},{"first_name":"André","full_name":"Deutz, André","last_name":"Deutz"},{"first_name":"Hao","last_name":"Wang","full_name":"Wang, Hao"},{"first_name":"Anna V.","full_name":"Kononova, Anna V.","last_name":"Kononova"},{"first_name":"Boris","full_name":"Naujoks, Boris","last_name":"Naujoks"},{"first_name":"Ke","full_name":"Li, Ke","last_name":"Li"},{"full_name":"Miettinen, Kaisa","last_name":"Miettinen","first_name":"Kaisa"},{"last_name":"Yevseyeva","full_name":"Yevseyeva, Iryna","first_name":"Iryna"}],"abstract":[{"text":"The design and choice of benchmark suites are ongoing topics of discussion in the multi-objective optimization community. Some suites provide a good understanding of their Pareto sets and fronts, such as the well-known DTLZ and ZDT problems. However, they lack diversity in their landscape properties and do not provide a mechanism for creating multiple distinct problem instances. Other suites, like bi-objective BBOB, possess diverse and challenging landscape properties, but their optima are not well understood and can only be approximated empirically without any guarantees.","lang":"eng"}],"publication":"Evolutionary Multi-Criterion Optimization","type":"conference"},{"place":"Düsseldorf","year":"2023","citation":{"ama":"Rüther MJ, Klippstein SH, Schmid H-J. Correlation between SLS-Powder processability and particle properties . In: <i>PARTEC International Congress on Particle Technology - Book of Abstracts</i>. VDI Verlag GmbH; 2023:172-176.","chicago":"Rüther, Moritz Johannes, Sven Helge Klippstein, and Hans-Joachim Schmid. “Correlation between SLS-Powder Processability and Particle Properties .” In <i>PARTEC International Congress on Particle Technology - Book of Abstracts</i>, 172–76. Düsseldorf: VDI Verlag GmbH, 2023.","ieee":"M. J. Rüther, S. H. Klippstein, and H.-J. Schmid, “Correlation between SLS-Powder processability and particle properties ,” in <i>PARTEC International Congress on Particle Technology - Book of Abstracts</i>, Nürnberg, 2023, pp. 172–176.","short":"M.J. Rüther, S.H. Klippstein, H.-J. Schmid, in: PARTEC International Congress on Particle Technology - Book of Abstracts, VDI Verlag GmbH, Düsseldorf, 2023, pp. 172–176.","bibtex":"@inproceedings{Rüther_Klippstein_Schmid_2023, place={Düsseldorf}, title={Correlation between SLS-Powder processability and particle properties }, booktitle={PARTEC International Congress on Particle Technology - Book of Abstracts}, publisher={VDI Verlag GmbH}, author={Rüther, Moritz Johannes and Klippstein, Sven Helge and Schmid, Hans-Joachim}, year={2023}, pages={172–176} }","mla":"Rüther, Moritz Johannes, et al. “Correlation between SLS-Powder Processability and Particle Properties .” <i>PARTEC International Congress on Particle Technology - Book of Abstracts</i>, VDI Verlag GmbH, 2023, pp. 172–76.","apa":"Rüther, M. J., Klippstein, S. H., &#38; Schmid, H.-J. (2023). Correlation between SLS-Powder processability and particle properties . <i>PARTEC International Congress on Particle Technology - Book of Abstracts</i>, 172–176."},"page":"172 - 176","publication_status":"published","has_accepted_license":"1","publication_identifier":{"eisbn":[" 978-3-18-990140-5"],"issn":["0083-5560"],"isbn":[" 978-3-18-990139-9"]},"title":"Correlation between SLS-Powder processability and particle properties ","conference":{"name":"PARTEC 2023","start_date":"2023-09-23","end_date":"2023-09-25","location":"Nürnberg"},"publisher":"VDI Verlag GmbH","date_updated":"2023-10-17T12:18:49Z","author":[{"first_name":"Moritz Johannes","last_name":"Rüther","full_name":"Rüther, Moritz Johannes","id":"38188"},{"first_name":"Sven Helge","id":"71545","full_name":"Klippstein, Sven Helge","last_name":"Klippstein"},{"first_name":"Hans-Joachim","id":"464","full_name":"Schmid, Hans-Joachim","last_name":"Schmid","orcid":"000-0001-8590-1921"}],"date_created":"2023-10-05T08:09:21Z","status":"public","type":"conference_abstract","publication":"PARTEC International Congress on Particle Technology - Book of Abstracts","language":[{"iso":"eng"}],"_id":"47626","user_id":"38188","department":[{"_id":"150"},{"_id":"624"}]},{"date_updated":"2023-10-31T15:47:55Z","publisher":"IEEE","author":[{"full_name":"Henkenjohann, Mark","last_name":"Henkenjohann","first_name":"Mark"},{"first_name":"Udo","last_name":"Nolte","full_name":"Nolte, Udo"},{"first_name":"Christian","last_name":"Henke","full_name":"Henke, Christian"},{"first_name":"Ansgar","id":"552","full_name":"Trächtler, Ansgar","last_name":"Trächtler"}],"date_created":"2023-10-31T15:47:14Z","title":"Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL","doi":"10.1109/icuas57906.2023.10156317","publication_status":"published","quality_controlled":"1","year":"2023","citation":{"chicago":"Henkenjohann, Mark, Udo Nolte, Christian Henke, and Ansgar Trächtler. “Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL.” In <i>2023 International Conference on Unmanned Aircraft Systems (ICUAS)</i>. IEEE, 2023. <a href=\"https://doi.org/10.1109/icuas57906.2023.10156317\">https://doi.org/10.1109/icuas57906.2023.10156317</a>.","ieee":"M. Henkenjohann, U. Nolte, C. Henke, and A. Trächtler, “Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL,” 2023, doi: <a href=\"https://doi.org/10.1109/icuas57906.2023.10156317\">10.1109/icuas57906.2023.10156317</a>.","ama":"Henkenjohann M, Nolte U, Henke C, Trächtler A. Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL. In: <i>2023 International Conference on Unmanned Aircraft Systems (ICUAS)</i>. IEEE; 2023. doi:<a href=\"https://doi.org/10.1109/icuas57906.2023.10156317\">10.1109/icuas57906.2023.10156317</a>","apa":"Henkenjohann, M., Nolte, U., Henke, C., &#38; Trächtler, A. (2023). Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL. <i>2023 International Conference on Unmanned Aircraft Systems (ICUAS)</i>. <a href=\"https://doi.org/10.1109/icuas57906.2023.10156317\">https://doi.org/10.1109/icuas57906.2023.10156317</a>","bibtex":"@inproceedings{Henkenjohann_Nolte_Henke_Trächtler_2023, title={Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL}, DOI={<a href=\"https://doi.org/10.1109/icuas57906.2023.10156317\">10.1109/icuas57906.2023.10156317</a>}, booktitle={2023 International Conference on Unmanned Aircraft Systems (ICUAS)}, publisher={IEEE}, author={Henkenjohann, Mark and Nolte, Udo and Henke, Christian and Trächtler, Ansgar}, year={2023} }","short":"M. Henkenjohann, U. Nolte, C. Henke, A. Trächtler, in: 2023 International Conference on Unmanned Aircraft Systems (ICUAS), IEEE, 2023.","mla":"Henkenjohann, Mark, et al. “Novel Cascaded Incremental Nonlinear Dynamic Inversion Controller Approach for a Tiltrotor VTOL.” <i>2023 International Conference on Unmanned Aircraft Systems (ICUAS)</i>, IEEE, 2023, doi:<a href=\"https://doi.org/10.1109/icuas57906.2023.10156317\">10.1109/icuas57906.2023.10156317</a>."},"_id":"48577","user_id":"41470","department":[{"_id":"153"},{"_id":"241"}],"language":[{"iso":"eng"}],"type":"conference","publication":"2023 International Conference on Unmanned Aircraft Systems (ICUAS)","status":"public"},{"publication_status":"published","place":"Austin","citation":{"bibtex":"@inproceedings{Kletetzka_Neitzel_Schmid_2023, place={Austin}, title={Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering}, volume={34}, booktitle={Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium}, publisher={Laboratory for Freeform Fabrication and University of Texas}, author={Kletetzka, Ivo and Neitzel, Fabian and Schmid, Hans-Joachim}, editor={Beaman, Joseph}, year={2023} }","short":"I. Kletetzka, F. Neitzel, H.-J. Schmid, in: J. Beaman (Ed.), Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium, Laboratory for Freeform Fabrication and University of Texas, Austin, 2023.","mla":"Kletetzka, Ivo, et al. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, edited by Joseph Beaman, vol. 34, Laboratory for Freeform Fabrication and University of Texas, 2023.","apa":"Kletetzka, I., Neitzel, F., &#38; Schmid, H.-J. (2023). Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In J. Beaman (Ed.), <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i> (Vol. 34). Laboratory for Freeform Fabrication and University of Texas.","ama":"Kletetzka I, Neitzel F, Schmid H-J. Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering. In: Beaman J, ed. <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>. Vol 34. Laboratory for Freeform Fabrication and University of Texas; 2023.","chicago":"Kletetzka, Ivo, Fabian Neitzel, and Hans-Joachim Schmid. “Assessing the Impact of the Powder Production Method on Ceramic-Filled Polyamide Composites Made by Laser Sintering.” In <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, edited by Joseph Beaman, Vol. 34. Austin: Laboratory for Freeform Fabrication and University of Texas, 2023.","ieee":"I. Kletetzka, F. Neitzel, and H.-J. Schmid, “Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering,” in <i>Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium</i>, Austin, 2023, vol. 34."},"intvolume":"        34","oa":"1","date_updated":"2023-11-02T16:49:49Z","author":[{"first_name":"Ivo","last_name":"Kletetzka","full_name":"Kletetzka, Ivo","id":"50769"},{"full_name":"Neitzel, Fabian","last_name":"Neitzel","first_name":"Fabian"},{"orcid":"000-0001-8590-1921","last_name":"Schmid","full_name":"Schmid, Hans-Joachim","id":"464","first_name":"Hans-Joachim"}],"volume":34,"main_file_link":[{"open_access":"1","url":"https://www.sffsymposium.org/"}],"conference":{"location":"Austin","end_date":"2023-08-16","start_date":"2023-08-13","name":"34th Annual International Solid Freeform Fabrication Symposium"},"type":"conference","editor":[{"first_name":"Joseph","last_name":"Beaman","full_name":"Beaman, Joseph"}],"status":"public","_id":"46764","user_id":"50769","department":[{"_id":"150"},{"_id":"624"},{"_id":"219"},{"_id":"9"}],"quality_controlled":"1","year":"2023","publisher":"Laboratory for Freeform Fabrication and University of Texas","date_created":"2023-09-01T12:30:25Z","title":"Assessing the Impact of the Powder Production Method on Ceramic-filled Polyamide Composites made by Laser Sintering","publication":"Proceedings of the 34th Annual International Solid Freeform Fabrication Symposium","abstract":[{"lang":"eng","text":"Polymer composites represent the industry standard in injection molding for the production \r\nof plastic components with increased requirements in terms of heat resistance and stiffness. In the \r\nfield of laser sintering (LS), these materials are less common so far. In order to extend the available \r\nmaterial variety for the LS process, new ceramic-filled Polyamide 613 powders are investigated\r\nwithin the scope of this work. Here, the resulting properties from two different powder production \r\nmethods are compared. One filled powder is produced by dry blending and the other powder with \r\nthe same filler and filling ratio is produced by encapsulating the filler particles inside the polymer \r\nparticles within the dissolution-precipitation process. It was found that encapsulating the filler \r\nparticles can provide certain benefits for the processability, for example an improved powder \r\nflowability or better filler dispersion. However, encapsulating the filler also alters the thermal \r\nproperties of the precipitated powder."}],"language":[{"iso":"eng"}]},{"quality_controlled":"1","type":"conference","year":"2023","status":"public","citation":{"apa":"Rozo Vasquez, J., Arian, B., Kersting, L., Walther, F., Homberg, W., &#38; Trächtler, A. (2023). <i>Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L</i>. The 14th International Conference on Numerical Methods in Industrial Forming Processes (Numiform 2023), Krakau.","short":"J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, A. Trächtler, in: 2023.","mla":"Rozo Vasquez, Julian, et al. <i>Softsensor Model of Phase Transformation during Flow Forming of Metastable Austenitic Steel AISI 304L</i>. 2023.","bibtex":"@inproceedings{Rozo Vasquez_Arian_Kersting_Walther_Homberg_Trächtler_2023, title={Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L}, author={Rozo Vasquez, Julian and Arian, Bahman and Kersting, Lukas and Walther, Frank and Homberg, Werner and Trächtler, Ansgar}, year={2023} }","ieee":"J. Rozo Vasquez, B. Arian, L. Kersting, F. Walther, W. Homberg, and A. Trächtler, “Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L,” presented at the The 14th International Conference on Numerical Methods in Industrial Forming Processes (Numiform 2023), Krakau, 2023.","chicago":"Rozo Vasquez, Julian, Bahman Arian, Lukas Kersting, Frank Walther, Werner Homberg, and Ansgar Trächtler. “Softsensor Model of Phase Transformation during Flow Forming of Metastable Austenitic Steel AISI 304L,” 2023.","ama":"Rozo Vasquez J, Arian B, Kersting L, Walther F, Homberg W, Trächtler A. Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L. In: ; 2023."},"_id":"44316","date_updated":"2023-11-07T00:01:46Z","department":[{"_id":"156"},{"_id":"241"},{"_id":"153"}],"date_created":"2023-05-02T09:56:46Z","user_id":"14931","author":[{"first_name":"Julian","full_name":"Rozo Vasquez, Julian","last_name":"Rozo Vasquez"},{"last_name":"Arian","full_name":"Arian, Bahman","id":"36287","first_name":"Bahman"},{"full_name":"Kersting, Lukas","last_name":"Kersting","first_name":"Lukas"},{"first_name":"Frank","last_name":"Walther","full_name":"Walther, Frank"},{"first_name":"Werner","id":"233","full_name":"Homberg, Werner","last_name":"Homberg"},{"first_name":"Ansgar","full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler"}],"title":"Softsensor model of phase transformation during flow forming of metastable austenitic steel AISI 304L","conference":{"name":"The 14th International Conference on Numerical Methods in Industrial Forming Processes (Numiform 2023)","start_date":"2023-06-25","end_date":"2023-06-29","location":"Krakau"},"language":[{"iso":"eng"}]},{"type":"book_chapter","publication":"Climate Protection, Resource Efficiency, and Sustainable Engineering","status":"public","user_id":"72008","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"_id":"48643","language":[{"iso":"eng"}],"publication_status":"published","publication_identifier":{"issn":["2703-1543","2703-1551"],"isbn":["9783837663778","9783839463772"]},"citation":{"ieee":"E. F. Akbulut Irmak, H. Hanses, I. Horwath, and T. Tröster, “Case Study III: Challenges of lightweight design, vehicles, and rescuers,” in <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>, Bielefeld, Germany: transcript Verlag, 2023.","chicago":"Akbulut Irmak, Emine Fulya, Hendrik Hanses, Ilona Horwath, and Thomas Tröster. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.” In <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>. Bielefeld, Germany: transcript Verlag, 2023. <a href=\"https://doi.org/10.14361/9783839463772-006\">https://doi.org/10.14361/9783839463772-006</a>.","ama":"Akbulut Irmak EF, Hanses H, Horwath I, Tröster T. Case Study III: Challenges of lightweight design, vehicles, and rescuers. In: <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>. transcript Verlag; 2023. doi:<a href=\"https://doi.org/10.14361/9783839463772-006\">10.14361/9783839463772-006</a>","mla":"Akbulut Irmak, Emine Fulya, et al. “Case Study III: Challenges of Lightweight Design, Vehicles, and Rescuers.” <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>, transcript Verlag, 2023, doi:<a href=\"https://doi.org/10.14361/9783839463772-006\">10.14361/9783839463772-006</a>.","short":"E.F. Akbulut Irmak, H. Hanses, I. Horwath, T. Tröster, in: Climate Protection, Resource Efficiency, and Sustainable Engineering, transcript Verlag, Bielefeld, Germany, 2023.","bibtex":"@inbook{Akbulut Irmak_Hanses_Horwath_Tröster_2023, place={Bielefeld, Germany}, title={Case Study III: Challenges of lightweight design, vehicles, and rescuers}, DOI={<a href=\"https://doi.org/10.14361/9783839463772-006\">10.14361/9783839463772-006</a>}, booktitle={Climate Protection, Resource Efficiency, and Sustainable Engineering}, publisher={transcript Verlag}, author={Akbulut Irmak, Emine Fulya and Hanses, Hendrik and Horwath, Ilona and Tröster, Thomas}, year={2023} }","apa":"Akbulut Irmak, E. F., Hanses, H., Horwath, I., &#38; Tröster, T. (2023). Case Study III: Challenges of lightweight design, vehicles, and rescuers. In <i>Climate Protection, Resource Efficiency, and Sustainable Engineering</i>. transcript Verlag. <a href=\"https://doi.org/10.14361/9783839463772-006\">https://doi.org/10.14361/9783839463772-006</a>"},"place":"Bielefeld, Germany","year":"2023","date_created":"2023-11-07T11:07:19Z","author":[{"orcid":"0000-0002-1338-810X","last_name":"Akbulut Irmak","id":"72008","full_name":"Akbulut Irmak, Emine Fulya","first_name":"Emine Fulya"},{"first_name":"Hendrik","full_name":"Hanses, Hendrik","id":"64527","last_name":"Hanses"},{"first_name":"Ilona","last_name":"Horwath","full_name":"Horwath, Ilona","id":"68836"},{"id":"553","full_name":"Tröster, Thomas","last_name":"Tröster","first_name":"Thomas"}],"date_updated":"2023-11-07T11:14:22Z","publisher":"transcript Verlag","doi":"10.14361/9783839463772-006","title":"Case Study III: Challenges of lightweight design, vehicles, and rescuers"},{"_id":"48672","user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"language":[{"iso":"eng"}],"type":"conference","status":"public","date_updated":"2023-11-07T14:30:24Z","date_created":"2023-11-07T14:30:13Z","author":[{"last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530","first_name":"Volker"},{"first_name":"Karina","last_name":"Gevers","id":"83151","full_name":"Gevers, Karina"},{"first_name":"L.","full_name":"Schraa, L.","last_name":"Schraa"},{"last_name":"Töws","full_name":"Töws, P.","first_name":"P."},{"last_name":"Uhlig","full_name":"Uhlig, K.","first_name":"K."},{"first_name":"M.","full_name":"Stommel, M.","last_name":"Stommel"},{"full_name":"Decker, J.","last_name":"Decker","first_name":"J."}],"title":"Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides","conference":{"location":"Singapur (Singapur)","name":"76th Annual Assembly of the International Institute of Welding (IIW)"},"year":"2023","place":"Singapur (Singapur)","citation":{"ama":"Schöppner V, Gevers K, Schraa L, et al. Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides. In: ; 2023.","ieee":"V. Schöppner <i>et al.</i>, “Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides,” presented at the 76th Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur), 2023.","chicago":"Schöppner, Volker, Karina Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel, and J. Decker. “Evaluation of the Effects of Different Heating Strategies on the Joining Partners during Infrared Welding of Black Polyamides.” Singapur (Singapur), 2023.","apa":"Schöppner, V., Gevers, K., Schraa, L., Töws, P., Uhlig, K., Stommel, M., &#38; Decker, J. (2023). <i>Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides</i>. 76th Annual Assembly of the International Institute of Welding (IIW), Singapur (Singapur).","mla":"Schöppner, Volker, et al. <i>Evaluation of the Effects of Different Heating Strategies on the Joining Partners during Infrared Welding of Black Polyamides</i>. 2023.","short":"V. Schöppner, K. Gevers, L. Schraa, P. Töws, K. Uhlig, M. Stommel, J. Decker, in: Singapur (Singapur), 2023.","bibtex":"@inproceedings{Schöppner_Gevers_Schraa_Töws_Uhlig_Stommel_Decker_2023, place={Singapur (Singapur)}, title={Evaluation of the effects of different heating strategies on the joining partners during infrared welding of black polyamides}, author={Schöppner, Volker and Gevers, Karina and Schraa, L. and Töws, P. and Uhlig, K. and Stommel, M. and Decker, J.}, year={2023} }"}},{"status":"public","type":"journal_article","publication":"Proceedings of the 2023 International Conference on Composite Materials","language":[{"iso":"eng"}],"user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"_id":"48671","citation":{"apa":"Schöppner, V., Gevers, K., Schraa, L., Uhlig, K., Töws, P., Decker, J., &#38; Stommel, M. (2023). Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation. <i>Proceedings of the 2023 International Conference on Composite Materials</i>.","bibtex":"@article{Schöppner_Gevers_Schraa_Uhlig_Töws_Decker_Stommel_2023, title={Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation}, journal={Proceedings of the 2023 International Conference on Composite Materials}, author={Schöppner, Volker and Gevers, Karina and Schraa, L. and Uhlig, K. and Töws, P. and Decker, J. and Stommel, M.}, year={2023} }","mla":"Schöppner, Volker, et al. “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation.” <i>Proceedings of the 2023 International Conference on Composite Materials</i>, 2023.","short":"V. Schöppner, K. Gevers, L. Schraa, K. Uhlig, P. Töws, J. Decker, M. Stommel, Proceedings of the 2023 International Conference on Composite Materials (2023).","chicago":"Schöppner, Volker, Karina Gevers, L. Schraa, K. Uhlig, P. Töws, J. Decker, and M. Stommel. “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation.” <i>Proceedings of the 2023 International Conference on Composite Materials</i>, 2023.","ieee":"V. Schöppner <i>et al.</i>, “Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation,” <i>Proceedings of the 2023 International Conference on Composite Materials</i>, 2023.","ama":"Schöppner V, Gevers K, Schraa L, et al. Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation. <i>Proceedings of the 2023 International Conference on Composite Materials</i>. Published online 2023."},"year":"2023","title":"Evaluation of Infrared Welded Joints of Short Fiber Reinforced Thermoplastics Using Digital Image Correlation","author":[{"last_name":"Schöppner","full_name":"Schöppner, Volker","id":"20530","first_name":"Volker"},{"last_name":"Gevers","id":"83151","full_name":"Gevers, Karina","first_name":"Karina"},{"full_name":"Schraa, L.","last_name":"Schraa","first_name":"L."},{"first_name":"K.","full_name":"Uhlig, K.","last_name":"Uhlig"},{"first_name":"P.","full_name":"Töws, P.","last_name":"Töws"},{"last_name":"Decker","full_name":"Decker, J.","first_name":"J."},{"first_name":"M.","last_name":"Stommel","full_name":"Stommel, M."}],"date_created":"2023-11-07T14:26:01Z","date_updated":"2023-11-07T14:26:53Z"},{"year":"2023","citation":{"ama":"Schöppner V, Arndt T. Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten. <i>Joining Plastics</i>. 2023;(17):20-27.","chicago":"Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” <i>Joining Plastics</i>, no. 17 (2023): 20–27.","ieee":"V. Schöppner and T. Arndt, “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten,” <i>Joining Plastics</i>, no. 17, pp. 20–27, 2023.","short":"V. Schöppner, T. Arndt, Joining Plastics (2023) 20–27.","mla":"Schöppner, Volker, and Theresa Arndt. “Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten.” <i>Joining Plastics</i>, no. 17, 2023, pp. 20–27.","bibtex":"@article{Schöppner_Arndt_2023, title={Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten}, number={17}, journal={Joining Plastics}, author={Schöppner, Volker and Arndt, Theresa}, year={2023}, pages={20–27} }","apa":"Schöppner, V., &#38; Arndt, T. (2023). Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten. <i>Joining Plastics</i>, <i>17</i>, 20–27."},"page":"20-27","publication_identifier":{"issn":["1864-3450"]},"issue":"17","title":"Entwicklung von Scale-Up-Regeln für das quasisimultane Laserdurchstrahlschweißen (QSS) von Thermoplasten","date_updated":"2023-11-07T14:06:57Z","date_created":"2023-11-07T14:06:25Z","author":[{"last_name":"Schöppner","id":"20530","full_name":"Schöppner, Volker","first_name":"Volker"},{"first_name":"Theresa","last_name":"Arndt","id":"45302","full_name":"Arndt, Theresa"}],"status":"public","type":"journal_article","publication":"Joining Plastics","language":[{"iso":"ger"}],"_id":"48665","user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}]},{"status":"public","type":"conference","language":[{"iso":"eng"}],"user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"_id":"48662","citation":{"bibtex":"@inproceedings{Schöppner_Petzke_2023, place={Denver, CO (USA)}, title={Dielectric Heating in the Vulcanization Process of Rubber Extrudates}, author={Schöppner, Volker and Petzke, J.}, year={2023} }","mla":"Schöppner, Volker, and J. Petzke. <i>Dielectric Heating in the Vulcanization Process of Rubber Extrudates</i>. 2023.","short":"V. Schöppner, J. Petzke, in: Denver, CO (USA), 2023.","apa":"Schöppner, V., &#38; Petzke, J. (2023). <i>Dielectric Heating in the Vulcanization Process of Rubber Extrudates</i>. Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA).","ama":"Schöppner V, Petzke J. Dielectric Heating in the Vulcanization Process of Rubber Extrudates. In: ; 2023.","chicago":"Schöppner, Volker, and J. Petzke. “Dielectric Heating in the Vulcanization Process of Rubber Extrudates.” Denver, CO (USA), 2023.","ieee":"V. Schöppner and J. Petzke, “Dielectric Heating in the Vulcanization Process of Rubber Extrudates,” presented at the Annual Technical Conference of the Society of Plastics Engineers (ANTEC), Denver, CO (USA), 2023."},"year":"2023","place":"Denver, CO (USA)","conference":{"name":"Annual Technical Conference of the Society of Plastics Engineers (ANTEC)","location":"Denver, CO (USA)"},"title":"Dielectric Heating in the Vulcanization Process of Rubber Extrudates","date_created":"2023-11-07T13:50:30Z","author":[{"first_name":"Volker","full_name":"Schöppner, Volker","id":"20530","last_name":"Schöppner"},{"full_name":"Petzke, J.","last_name":"Petzke","first_name":"J."}],"date_updated":"2023-11-07T13:50:34Z"}]