[{"user_id":"44116","department":[{"_id":"9"},{"_id":"367"},{"_id":"321"}],"_id":"49742","language":[{"iso":"eng"}],"type":"conference","publication":"INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022","status":"public","author":[{"first_name":"Franziska Isabelle","last_name":"Bürenhaus","full_name":"Bürenhaus, Franziska Isabelle","id":"41055"},{"last_name":"Moritzer","full_name":"Moritzer, Elmar","id":"20531","first_name":"Elmar"}],"date_created":"2023-12-18T09:28:57Z","publisher":"AIP Publishing","date_updated":"2023-12-18T09:29:15Z","doi":"10.1063/5.0135843","title":"Influence of fiber geometry and sizing on glass fiber breakage","publication_status":"published","publication_identifier":{"issn":["0094-243X"]},"quality_controlled":"1","citation":{"chicago":"Bürenhaus, Franziska Isabelle, and Elmar Moritzer. “Influence of Fiber Geometry and Sizing on Glass Fiber Breakage.” In <i>INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022</i>. AIP Publishing, 2023. <a href=\"https://doi.org/10.1063/5.0135843\">https://doi.org/10.1063/5.0135843</a>.","ieee":"F. I. Bürenhaus and E. Moritzer, “Influence of fiber geometry and sizing on glass fiber breakage,” 2023, doi: <a href=\"https://doi.org/10.1063/5.0135843\">10.1063/5.0135843</a>.","ama":"Bürenhaus FI, Moritzer E. Influence of fiber geometry and sizing on glass fiber breakage. In: <i>INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022</i>. AIP Publishing; 2023. doi:<a href=\"https://doi.org/10.1063/5.0135843\">10.1063/5.0135843</a>","apa":"Bürenhaus, F. I., &#38; Moritzer, E. (2023). Influence of fiber geometry and sizing on glass fiber breakage. <i>INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022</i>. <a href=\"https://doi.org/10.1063/5.0135843\">https://doi.org/10.1063/5.0135843</a>","bibtex":"@inproceedings{Bürenhaus_Moritzer_2023, title={Influence of fiber geometry and sizing on glass fiber breakage}, DOI={<a href=\"https://doi.org/10.1063/5.0135843\">10.1063/5.0135843</a>}, booktitle={INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022}, publisher={AIP Publishing}, author={Bürenhaus, Franziska Isabelle and Moritzer, Elmar}, year={2023} }","short":"F.I. Bürenhaus, E. Moritzer, in: INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022, AIP Publishing, 2023.","mla":"Bürenhaus, Franziska Isabelle, and Elmar Moritzer. “Influence of Fiber Geometry and Sizing on Glass Fiber Breakage.” <i>INTERNATIONAL CONFERENCE ON HUMANS AND TECHNOLOGY: A HOLISTIC AND SYMBIOTIC APPROACH TO SUSTAINABLE DEVELOPMENT: ICHT 2022</i>, AIP Publishing, 2023, doi:<a href=\"https://doi.org/10.1063/5.0135843\">10.1063/5.0135843</a>."},"year":"2023"},{"language":[{"iso":"eng"}],"department":[{"_id":"146"},{"_id":"219"},{"_id":"158"}],"user_id":"35970","_id":"49774","status":"public","publication":"2023 IEEE International Electric Machines &amp; Drives Conference (IEMDC)","type":"conference","doi":"10.1109/iemdc55163.2023.10238918","title":"Additively manufactured air-cooled lightweight rotor for an automotive electric motor","date_created":"2023-12-18T10:22:38Z","author":[{"first_name":"Maximilian","last_name":"Bieber","full_name":"Bieber, Maximilian"},{"first_name":"Michael","full_name":"Haase, Michael","id":"35970","last_name":"Haase"},{"first_name":"Frederik","last_name":"Tasche","full_name":"Tasche, Frederik"},{"first_name":"Alexander","id":"11029","full_name":"Zibart, Alexander","last_name":"Zibart"},{"first_name":"Bernd","full_name":"Ponick, Bernd","last_name":"Ponick"}],"publisher":"IEEE","date_updated":"2023-12-18T10:26:53Z","citation":{"bibtex":"@inproceedings{Bieber_Haase_Tasche_Zibart_Ponick_2023, title={Additively manufactured air-cooled lightweight rotor for an automotive electric motor}, DOI={<a href=\"https://doi.org/10.1109/iemdc55163.2023.10238918\">10.1109/iemdc55163.2023.10238918</a>}, booktitle={2023 IEEE International Electric Machines &#38;amp; Drives Conference (IEMDC)}, publisher={IEEE}, author={Bieber, Maximilian and Haase, Michael and Tasche, Frederik and Zibart, Alexander and Ponick, Bernd}, year={2023} }","short":"M. Bieber, M. Haase, F. Tasche, A. Zibart, B. Ponick, in: 2023 IEEE International Electric Machines &#38;amp; Drives Conference (IEMDC), IEEE, 2023.","mla":"Bieber, Maximilian, et al. “Additively Manufactured Air-Cooled Lightweight Rotor for an Automotive Electric Motor.” <i>2023 IEEE International Electric Machines &#38;amp; Drives Conference (IEMDC)</i>, IEEE, 2023, doi:<a href=\"https://doi.org/10.1109/iemdc55163.2023.10238918\">10.1109/iemdc55163.2023.10238918</a>.","apa":"Bieber, M., Haase, M., Tasche, F., Zibart, A., &#38; Ponick, B. (2023). Additively manufactured air-cooled lightweight rotor for an automotive electric motor. <i>2023 IEEE International Electric Machines &#38;amp; Drives Conference (IEMDC)</i>. <a href=\"https://doi.org/10.1109/iemdc55163.2023.10238918\">https://doi.org/10.1109/iemdc55163.2023.10238918</a>","chicago":"Bieber, Maximilian, Michael Haase, Frederik Tasche, Alexander Zibart, and Bernd Ponick. “Additively Manufactured Air-Cooled Lightweight Rotor for an Automotive Electric Motor.” In <i>2023 IEEE International Electric Machines &#38;amp; Drives Conference (IEMDC)</i>. IEEE, 2023. <a href=\"https://doi.org/10.1109/iemdc55163.2023.10238918\">https://doi.org/10.1109/iemdc55163.2023.10238918</a>.","ieee":"M. Bieber, M. Haase, F. Tasche, A. Zibart, and B. Ponick, “Additively manufactured air-cooled lightweight rotor for an automotive electric motor,” 2023, doi: <a href=\"https://doi.org/10.1109/iemdc55163.2023.10238918\">10.1109/iemdc55163.2023.10238918</a>.","ama":"Bieber M, Haase M, Tasche F, Zibart A, Ponick B. Additively manufactured air-cooled lightweight rotor for an automotive electric motor. In: <i>2023 IEEE International Electric Machines &#38;amp; Drives Conference (IEMDC)</i>. IEEE; 2023. doi:<a href=\"https://doi.org/10.1109/iemdc55163.2023.10238918\">10.1109/iemdc55163.2023.10238918</a>"},"year":"2023","quality_controlled":"1","publication_status":"published"},{"conference":{"start_date":"2023-09-27","name":"E-Motive 2023","location":"Schweinfurt","end_date":"2023-09-28"},"title":"Future of electric motors: Additive manufacturing of components with innovative lightweight and cooling structures","date_created":"2023-12-18T11:21:52Z","author":[{"id":"28520","full_name":"Magerkohl, Sebastian","last_name":"Magerkohl","first_name":"Sebastian"},{"first_name":"Michael","full_name":"Haase, Michael","id":"35970","last_name":"Haase"},{"last_name":"Magyar","id":"97759","full_name":"Magyar, Balázs","first_name":"Balázs"}],"date_updated":"2023-12-18T11:24:58Z","citation":{"chicago":"Magerkohl, Sebastian, Michael Haase, and Balázs Magyar. “Future of Electric Motors: Additive Manufacturing of Components with Innovative Lightweight and Cooling Structures,” 2023.","ieee":"S. Magerkohl, M. Haase, and B. Magyar, “Future of electric motors: Additive manufacturing of components with innovative lightweight and cooling structures,” presented at the E-Motive 2023, Schweinfurt, 2023.","ama":"Magerkohl S, Haase M, Magyar B. Future of electric motors: Additive manufacturing of components with innovative lightweight and cooling structures. In: ; 2023.","apa":"Magerkohl, S., Haase, M., &#38; Magyar, B. (2023). <i>Future of electric motors: Additive manufacturing of components with innovative lightweight and cooling structures</i>. E-Motive 2023, Schweinfurt.","mla":"Magerkohl, Sebastian, et al. <i>Future of Electric Motors: Additive Manufacturing of Components with Innovative Lightweight and Cooling Structures</i>. 2023.","bibtex":"@inproceedings{Magerkohl_Haase_Magyar_2023, title={Future of electric motors: Additive manufacturing of components with innovative lightweight and cooling structures}, author={Magerkohl, Sebastian and Haase, Michael and Magyar, Balázs}, year={2023} }","short":"S. Magerkohl, M. Haase, B. Magyar, in: 2023."},"year":"2023","publication_status":"published","language":[{"iso":"eng"}],"user_id":"28520","department":[{"_id":"146"}],"_id":"49781","status":"public","type":"conference"},{"abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>The use of heterogeneous materials, such as composites with Prandtl‐Reuss‐type material laws, has increased in industrial praxis, making finite element modeling with homogenization techniques a well‐accepted tool. These methods are particularly advantageous to account for microstructural mechanisms which can be related to nonlinearities and time‐dependency due to elasto‐plasticity behavior. However, their advantages are diminished by increasing computational demand. The present contribution deals with the balance of accuracy and numerical efficiency of nonlinear homogenization associated with a framework of goal‐oriented adaptivity, which takes into account error accumulation over time. To this end, model adaptivity of homogenization methods is coupled to mesh adaptivity on the macro scale. Our new proposed adaptive procedure is driven by a goal‐oriented a posteriori error estimator based on duality techniques using downwind and upwind approximations. Due to nonlinearities and time‐dependency of the plasticity, the estimation of error transport and error generation is obtained with a backward‐in‐time dual method despite a high demand on memory capacity. In this contribution, the dual problem is solved with a forward‐in‐time dual method that allows estimating the full error during the resolution of the primal problem without the need for extra memory capacity. Finally, a numerical example illustrates the effectiveness of the proposed adaptive approach.</jats:p>","lang":"eng"}],"status":"public","publication":"PAMM","type":"journal_article","keyword":["Electrical and Electronic Engineering","Atomic and Molecular Physics","and Optics"],"language":[{"iso":"eng"}],"_id":"49866","department":[{"_id":"9"},{"_id":"154"},{"_id":"321"}],"user_id":"335","year":"2023","citation":{"ieee":"A. Tchomgue Simeu and R. Mahnken, “Downwind and upwind approximations for mesh and model adaptivity of elasto‐plastic composites,” <i>PAMM</i>, 2023, doi: <a href=\"https://doi.org/10.1002/pamm.202300136\">10.1002/pamm.202300136</a>.","chicago":"Tchomgue Simeu, Arnold, and Rolf Mahnken. “Downwind and Upwind Approximations for Mesh and Model Adaptivity of Elasto‐plastic Composites.” <i>PAMM</i>, 2023. <a href=\"https://doi.org/10.1002/pamm.202300136\">https://doi.org/10.1002/pamm.202300136</a>.","apa":"Tchomgue Simeu, A., &#38; Mahnken, R. (2023). Downwind and upwind approximations for mesh and model adaptivity of elasto‐plastic composites. <i>PAMM</i>. <a href=\"https://doi.org/10.1002/pamm.202300136\">https://doi.org/10.1002/pamm.202300136</a>","ama":"Tchomgue Simeu A, Mahnken R. Downwind and upwind approximations for mesh and model adaptivity of elasto‐plastic composites. <i>PAMM</i>. Published online 2023. doi:<a href=\"https://doi.org/10.1002/pamm.202300136\">10.1002/pamm.202300136</a>","bibtex":"@article{Tchomgue Simeu_Mahnken_2023, title={Downwind and upwind approximations for mesh and model adaptivity of elasto‐plastic composites}, DOI={<a href=\"https://doi.org/10.1002/pamm.202300136\">10.1002/pamm.202300136</a>}, journal={PAMM}, publisher={Wiley}, author={Tchomgue Simeu, Arnold and Mahnken, Rolf}, year={2023} }","mla":"Tchomgue Simeu, Arnold, and Rolf Mahnken. “Downwind and Upwind Approximations for Mesh and Model Adaptivity of Elasto‐plastic Composites.” <i>PAMM</i>, Wiley, 2023, doi:<a href=\"https://doi.org/10.1002/pamm.202300136\">10.1002/pamm.202300136</a>.","short":"A. Tchomgue Simeu, R. Mahnken, PAMM (2023)."},"quality_controlled":"1","publication_identifier":{"issn":["1617-7061","1617-7061"]},"publication_status":"published","title":"Downwind and upwind approximations for mesh and model adaptivity of elasto‐plastic composites","doi":"10.1002/pamm.202300136","date_updated":"2023-12-19T12:20:51Z","publisher":"Wiley","date_created":"2023-12-19T12:20:05Z","author":[{"full_name":"Tchomgue Simeu, Arnold","id":"83075","last_name":"Tchomgue Simeu","first_name":"Arnold"},{"full_name":"Mahnken, Rolf","id":"335","last_name":"Mahnken","first_name":"Rolf"}]},{"user_id":"61443","_id":"49116","language":[{"iso":"ger"}],"keyword":["Religious studies","Education"],"type":"review","publication":"Religionspädagogische Beiträge","status":"public","author":[{"first_name":"Jonas Maximilian","last_name":"Hüster","id":"61443","full_name":"Hüster, Jonas Maximilian"}],"date_created":"2023-11-22T08:52:49Z","volume":46,"date_updated":"2023-12-19T14:04:52Z","oa":"1","publisher":"Universitatsbibliothek Bamberg","main_file_link":[{"open_access":"1","url":"https://rpb-journal.de/index.php/rpb/article/view/263/285"}],"doi":"10.20377/rpb-263","title":"Riegel, Ulrich / Zimmermann, Mirjam (2022). Evaluation des konfessionell-kooperativen Religionsunterrichts in Nordrhein-Westfalen. Stuttgart: Kohlhammer. ISBN 978-3-17-043134-8. 333 Seiten.","issue":"1","publication_status":"published","publication_identifier":{"issn":["0173-0339"]},"citation":{"ama":"Hüster JM. Riegel, Ulrich / Zimmermann, Mirjam (2022). Evaluation des konfessionell-kooperativen Religionsunterrichts in Nordrhein-Westfalen. Stuttgart: Kohlhammer. ISBN 978-3-17-043134-8. 333 Seiten. <i>Religionspädagogische Beiträge</i>. 2023;46(1):127-129. doi:<a href=\"https://doi.org/10.20377/rpb-263\">10.20377/rpb-263</a>","ieee":"J. M. Hüster, “Riegel, Ulrich / Zimmermann, Mirjam (2022). Evaluation des konfessionell-kooperativen Religionsunterrichts in Nordrhein-Westfalen. Stuttgart: Kohlhammer. ISBN 978-3-17-043134-8. 333 Seiten.,” <i>Religionspädagogische Beiträge</i>, vol. 46, no. 1. Universitatsbibliothek Bamberg, pp. 127–129, 2023, doi: <a href=\"https://doi.org/10.20377/rpb-263\">10.20377/rpb-263</a>.","chicago":"Hüster, Jonas Maximilian. “Riegel, Ulrich / Zimmermann, Mirjam (2022). Evaluation des konfessionell-kooperativen Religionsunterrichts in Nordrhein-Westfalen. Stuttgart: Kohlhammer. ISBN 978-3-17-043134-8. 333 Seiten.” <i>Religionspädagogische Beiträge</i>. Universitatsbibliothek Bamberg, 2023. <a href=\"https://doi.org/10.20377/rpb-263\">https://doi.org/10.20377/rpb-263</a>.","short":"J.M. Hüster, Religionspädagogische Beiträge 46 (2023) 127–129.","bibtex":"@article{Hüster_2023, title={Riegel, Ulrich / Zimmermann, Mirjam (2022). Evaluation des konfessionell-kooperativen Religionsunterrichts in Nordrhein-Westfalen. Stuttgart: Kohlhammer. ISBN 978-3-17-043134-8. 333 Seiten.}, volume={46}, DOI={<a href=\"https://doi.org/10.20377/rpb-263\">10.20377/rpb-263</a>}, number={1}, journal={Religionspädagogische Beiträge}, publisher={Universitatsbibliothek Bamberg}, author={Hüster, Jonas Maximilian}, year={2023}, pages={127–129} }","mla":"Hüster, Jonas Maximilian. “Riegel, Ulrich / Zimmermann, Mirjam (2022). Evaluation des konfessionell-kooperativen Religionsunterrichts in Nordrhein-Westfalen. Stuttgart: Kohlhammer. ISBN 978-3-17-043134-8. 333 Seiten.” <i>Religionspädagogische Beiträge</i>, vol. 46, no. 1, Universitatsbibliothek Bamberg, 2023, pp. 127–29, doi:<a href=\"https://doi.org/10.20377/rpb-263\">10.20377/rpb-263</a>.","apa":"Hüster, J. M. (2023). Riegel, Ulrich / Zimmermann, Mirjam (2022). Evaluation des konfessionell-kooperativen Religionsunterrichts in Nordrhein-Westfalen. Stuttgart: Kohlhammer. ISBN 978-3-17-043134-8. 333 Seiten. In <i>Religionspädagogische Beiträge</i> (Vol. 46, Issue 1, pp. 127–129). Universitatsbibliothek Bamberg. <a href=\"https://doi.org/10.20377/rpb-263\">https://doi.org/10.20377/rpb-263</a>"},"page":"127-129","intvolume":"        46","year":"2023"},{"type":"journal_article","publication":"Konstruktion","status":"public","abstract":[{"lang":"ger","text":"inhalt Der verlässliche Betrieb von technischen Produkten wird zunehmend durch bewusste Angriffe bedroht. Vollständige Sicherheit ist dabei nicht möglich, durchschlagende Angriffe sind unvermeidbar (Assume Breach). Dies erfordert einen Paradigmenwechsel in der sicherheitsgerechten Entwicklung mechatronischer und cyber-physischer Systeme hin zu Defense-in-Depth. Systeme müssen so ausgelegt werden, dass sie auch bei gezielten Angriffen möglichst hohe Zuverlässigkeit und Sicherheit gewährleisten. Der hier beschriebene Lösungsansatz erweitert das Systemmodell um Angriffsszenarien und Verteidigungslinien. Diese werden am Beispiel eines industriellen Schließsystems zur Anlagensicherheit erläutert. Entwickler werden sensibilisiert, Angriffe systematisch zu berücksichtigen und interdisziplinär Verteidigungselemente gegenüber Bedrohungen und Angriffen zu spezifizieren."},{"text":"The reliable operation of technical products is increasingly threatened by deliberate attacks. Complete security is not possible, striking attacks are unavoidable (assume breach). This requires a paradigm shift in security-oriented engineering of mechatronic and cyber-physical systems towards Defense-in-Depth. Systems need to be engineered in a way that full reliability and security are ensured even in case of targeted attacks. The solution approach described here expands the system model to include attack scenarios and lines of defence. It is applied to an industrial locking system for plant security as an example. Developers are sensitised to systematically consider attacks and to specify interdisciplinary defence elements against threats and attacks.","lang":"eng"}],"user_id":"405","department":[{"_id":"152"},{"_id":"76"}],"_id":"48946","language":[{"iso":"ger"}],"article_type":"original","keyword":["Mechanical Engineering","Mechanics of Materials","General Materials Science","Theoretical Computer Science"],"issue":"11-12","publication_status":"published","quality_controlled":"1","publication_identifier":{"issn":["0720-5953"]},"citation":{"chicago":"Gräßler, Iris, Eric Bodden, Dominik Wiechel, and Jens Pottebaum. “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security.” <i>Konstruktion</i> 75, no. 11–12 (2023): 60–65. <a href=\"https://doi.org/10.37544/0720-5953-2023-11-12-60\">https://doi.org/10.37544/0720-5953-2023-11-12-60</a>.","ieee":"I. Gräßler, E. Bodden, D. Wiechel, and J. Pottebaum, “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security,” <i>Konstruktion</i>, vol. 75, no. 11–12, pp. 60–65, 2023, doi: <a href=\"https://doi.org/10.37544/0720-5953-2023-11-12-60\">10.37544/0720-5953-2023-11-12-60</a>.","ama":"Gräßler I, Bodden E, Wiechel D, Pottebaum J. Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security. <i>Konstruktion</i>. 2023;75(11-12):60-65. doi:<a href=\"https://doi.org/10.37544/0720-5953-2023-11-12-60\">10.37544/0720-5953-2023-11-12-60</a>","bibtex":"@article{Gräßler_Bodden_Wiechel_Pottebaum_2023, title={Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security}, volume={75}, DOI={<a href=\"https://doi.org/10.37544/0720-5953-2023-11-12-60\">10.37544/0720-5953-2023-11-12-60</a>}, number={11–12}, journal={Konstruktion}, publisher={VDI Fachmedien GmbH and Co. KG}, author={Gräßler, Iris and Bodden, Eric and Wiechel, Dominik and Pottebaum, Jens}, year={2023}, pages={60–65} }","mla":"Gräßler, Iris, et al. “Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security.” <i>Konstruktion</i>, vol. 75, no. 11–12, VDI Fachmedien GmbH and Co. KG, 2023, pp. 60–65, doi:<a href=\"https://doi.org/10.37544/0720-5953-2023-11-12-60\">10.37544/0720-5953-2023-11-12-60</a>.","short":"I. Gräßler, E. Bodden, D. Wiechel, J. Pottebaum, Konstruktion 75 (2023) 60–65.","apa":"Gräßler, I., Bodden, E., Wiechel, D., &#38; Pottebaum, J. (2023). Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security. <i>Konstruktion</i>, <i>75</i>(11–12), 60–65. <a href=\"https://doi.org/10.37544/0720-5953-2023-11-12-60\">https://doi.org/10.37544/0720-5953-2023-11-12-60</a>"},"page":"60-65","intvolume":"        75","year":"2023","author":[{"id":"47565","full_name":"Gräßler, Iris","last_name":"Gräßler","orcid":"0000-0001-5765-971X","first_name":"Iris"},{"id":"59256","full_name":"Bodden, Eric","orcid":"0000-0003-3470-3647","last_name":"Bodden","first_name":"Eric"},{"id":"67161","full_name":"Wiechel, Dominik","last_name":"Wiechel","first_name":"Dominik"},{"id":"405","full_name":"Pottebaum, Jens","last_name":"Pottebaum","orcid":"http://orcid.org/0000-0001-8778-2989","first_name":"Jens"}],"date_created":"2023-11-16T08:23:12Z","volume":75,"publisher":"VDI Fachmedien GmbH and Co. KG","date_updated":"2023-12-20T14:10:51Z","doi":"10.37544/0720-5953-2023-11-12-60","title":"Defense-in-Depth als neues Paradigma der sicherheitsgerechten Produktentwicklung: interdisziplinäre, bedrohungsbewusste und lösungsorientierte Security"},{"status":"public","type":"journal_article","article_type":"original","user_id":"14931","department":[{"_id":"156"},{"_id":"153"},{"_id":"241"}],"_id":"48075","citation":{"chicago":"Homberg, Werner, Bahman Arian, Viktor Arne, Thomas Borgert, Alexander Brosius, Peter Groche, Christoph Hartmann, et al. “Softsensors: Key Component of Property Control in Forming Technology.” <i>Production Engineering</i>, 2023. <a href=\"https://doi.org/10.1007/s11740-023-01227-1\">https://doi.org/10.1007/s11740-023-01227-1</a>.","ieee":"W. Homberg <i>et al.</i>, “Softsensors: key component of property control in forming technology,” <i>Production Engineering</i>, 2023, doi: <a href=\"https://doi.org/10.1007/s11740-023-01227-1\">10.1007/s11740-023-01227-1</a>.","ama":"Homberg W, Arian B, Arne V, et al. Softsensors: key component of property control in forming technology. <i>Production Engineering</i>. Published online 2023. doi:<a href=\"https://doi.org/10.1007/s11740-023-01227-1\">10.1007/s11740-023-01227-1</a>","apa":"Homberg, W., Arian, B., Arne, V., Borgert, T., Brosius, A., Groche, P., Hartmann, C., Kersting, L., Laue, R., Martschin, J., Meurer, T., Spies, D., Tekkaya, A. E., Trächtler, A., Volk, W., Wendler, F., &#38; Wrobel, M. (2023). Softsensors: key component of property control in forming technology. <i>Production Engineering</i>. <a href=\"https://doi.org/10.1007/s11740-023-01227-1\">https://doi.org/10.1007/s11740-023-01227-1</a>","short":"W. Homberg, B. Arian, V. Arne, T. Borgert, A. Brosius, P. Groche, C. Hartmann, L. Kersting, R. Laue, J. Martschin, T. Meurer, D. Spies, A.E. Tekkaya, A. Trächtler, W. Volk, F. Wendler, M. Wrobel, Production Engineering (2023).","mla":"Homberg, Werner, et al. “Softsensors: Key Component of Property Control in Forming Technology.” <i>Production Engineering</i>, Springer Science and Business Media LLC, 2023, doi:<a href=\"https://doi.org/10.1007/s11740-023-01227-1\">10.1007/s11740-023-01227-1</a>.","bibtex":"@article{Homberg_Arian_Arne_Borgert_Brosius_Groche_Hartmann_Kersting_Laue_Martschin_et al._2023, title={Softsensors: key component of property control in forming technology}, DOI={<a href=\"https://doi.org/10.1007/s11740-023-01227-1\">10.1007/s11740-023-01227-1</a>}, journal={Production Engineering}, publisher={Springer Science and Business Media LLC}, author={Homberg, Werner and Arian, Bahman and Arne, Viktor and Borgert, Thomas and Brosius, Alexander and Groche, Peter and Hartmann, Christoph and Kersting, Lukas and Laue, Robert and Martschin, Juri and et al.}, year={2023} }"},"publication_status":"published","publication_identifier":{"issn":["0944-6524","1863-7353"]},"main_file_link":[{"url":"https://link.springer.com/article/10.1007/s11740-023-01227-1","open_access":"1"}],"doi":"10.1007/s11740-023-01227-1","author":[{"first_name":"Werner","last_name":"Homberg","full_name":"Homberg, Werner","id":"233"},{"first_name":"Bahman","last_name":"Arian","id":"36287","full_name":"Arian, Bahman"},{"last_name":"Arne","full_name":"Arne, Viktor","first_name":"Viktor"},{"last_name":"Borgert","id":"83141","full_name":"Borgert, Thomas","first_name":"Thomas"},{"last_name":"Brosius","full_name":"Brosius, Alexander","first_name":"Alexander"},{"full_name":"Groche, Peter","last_name":"Groche","first_name":"Peter"},{"full_name":"Hartmann, Christoph","last_name":"Hartmann","first_name":"Christoph"},{"first_name":"Lukas","last_name":"Kersting","full_name":"Kersting, Lukas"},{"full_name":"Laue, Robert","last_name":"Laue","first_name":"Robert"},{"full_name":"Martschin, Juri","last_name":"Martschin","first_name":"Juri"},{"first_name":"Thomas","full_name":"Meurer, Thomas","last_name":"Meurer"},{"first_name":"Daniel","full_name":"Spies, Daniel","last_name":"Spies"},{"first_name":"A. Erman","last_name":"Tekkaya","full_name":"Tekkaya, A. Erman"},{"full_name":"Trächtler, Ansgar","id":"552","last_name":"Trächtler","first_name":"Ansgar"},{"first_name":"Wolfram","last_name":"Volk","full_name":"Volk, Wolfram"},{"first_name":"Frank","full_name":"Wendler, Frank","last_name":"Wendler"},{"last_name":"Wrobel","full_name":"Wrobel, Malte","first_name":"Malte"}],"date_updated":"2023-12-22T10:56:58Z","oa":"1","abstract":[{"lang":"eng","text":"<jats:title>Abstract</jats:title><jats:p>The constantly increasing challenges of production technology for the economic and resource-saving production of metallic workpieces require, among other things, the optimisation of existing processes. Forming technology, which is confronted with new challenges regarding the quality of the workpieces, must also organise the individual processes more efficiently and at the same time more reliably in order to be able to guarantee good workpiece quality and at the same time to be able to produce economically. One way to meet these challenges is to carry out the forming processes in closed-loop control systems using softsensors. Despite the many potential applications of softsensors in the field of forming technology, there is still no definition of the term softsensor. This publication therefore proposes a definition of the softsensor based on the definition of a sensor and the distinction from the observer, which on the one hand is intended to stimulate scientific discourse and on the other hand is also intended to form the basis for further scientific work. Based on this definition, a wide variety of highly topical application examples of various softsensors in the field of forming technology are given.</jats:p>"}],"publication":"Production Engineering","language":[{"iso":"eng"}],"keyword":["Industrial and Manufacturing Engineering","Mechanical Engineering"],"year":"2023","quality_controlled":"1","title":"Softsensors: key component of property control in forming technology","date_created":"2023-10-16T07:17:17Z","publisher":"Springer Science and Business Media LLC"},{"status":"public","publication":"Klebtechnische Doktorandenseminare 2020 - 2022","type":"book_chapter","language":[{"iso":"ger"}],"department":[{"_id":"157"}],"user_id":"66192","series_title":"DVS-Berichte","_id":"50178","intvolume":"       369","corporate_editor":["DVS Media GmbH"],"citation":{"ama":"Beule F, Teutenberg D, Meschut G. Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen. In: DVS Media GmbH, ed. <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>. Vol 369. DVS-Berichte. DVS Media GmbH; 2023.","chicago":"Beule, Felix, Dominik Teutenberg, and Gerson Meschut. “Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen.” In <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>, edited by DVS Media GmbH, Vol. 369. DVS-Berichte. Düsseldorf: DVS Media GmbH, 2023.","ieee":"F. Beule, D. Teutenberg, and G. Meschut, “Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen,” in <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>, vol. 369, DVS Media GmbH, Ed. Düsseldorf: DVS Media GmbH, 2023.","apa":"Beule, F., Teutenberg, D., &#38; Meschut, G. (2023). Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen. In DVS Media GmbH (Ed.), <i>Klebtechnische Doktorandenseminare 2020 - 2022</i> (Vol. 369). DVS Media GmbH.","bibtex":"@inbook{Beule_Teutenberg_Meschut_2023, place={Düsseldorf}, series={DVS-Berichte}, title={Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen}, volume={369}, booktitle={Klebtechnische Doktorandenseminare 2020 - 2022}, publisher={DVS Media GmbH}, author={Beule, Felix and Teutenberg, Dominik and Meschut, Gerson}, editor={DVS Media GmbH}, year={2023}, collection={DVS-Berichte} }","short":"F. Beule, D. Teutenberg, G. Meschut, in: DVS Media GmbH (Ed.), Klebtechnische Doktorandenseminare 2020 - 2022, DVS Media GmbH, Düsseldorf, 2023.","mla":"Beule, Felix, et al. “Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen.” <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>, edited by DVS Media GmbH, vol. 369, DVS Media GmbH, 2023."},"year":"2023","place":"Düsseldorf","publication_identifier":{"isbn":["978-3-96144-139-6"]},"quality_controlled":"1","publication_status":"published","conference":{"end_date":"2021-09-22","location":"Paderborn","name":"12. Doktorandenseminar Klebtechnik","start_date":"2021-09-21"},"title":"Untersuchung des Einflusses von Relativverschiebungen während der Aushärtung auf die mechanischen Eigenschaften von Klebverbindungen","volume":369,"author":[{"last_name":"Beule","full_name":"Beule, Felix","id":"66192","first_name":"Felix"},{"first_name":"Dominik","last_name":"Teutenberg","id":"537","full_name":"Teutenberg, Dominik"},{"first_name":"Gerson","last_name":"Meschut","orcid":"0000-0002-2763-1246","id":"32056","full_name":"Meschut, Gerson"}],"date_created":"2024-01-04T09:48:12Z","date_updated":"2024-01-04T09:48:18Z","publisher":"DVS Media GmbH"},{"language":[{"iso":"ger"}],"user_id":"40263","series_title":"DVS Berichte","department":[{"_id":"157"}],"_id":"50207","status":"public","type":"book_chapter","publication":"Klebtechnische Doktorandenseminare 2020 - 2022","conference":{"name":"13. Doktorandenseminar Klebtechnik ","start_date":"2022-10-05","end_date":"2022-10-06","location":"Blankenburg (Harz)"},"title":"Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie","date_created":"2024-01-04T13:21:02Z","author":[{"id":"40263","full_name":"Tews, Karina","last_name":"Tews","first_name":"Karina"},{"full_name":"Çavdar, Serkan","id":"36456","last_name":"Çavdar","first_name":"Serkan"},{"full_name":"Meschut, Gerson","id":"32056","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson"}],"volume":369,"date_updated":"2024-01-04T13:26:51Z","citation":{"chicago":"Tews, Karina, Serkan Çavdar, and Gerson Meschut. “Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie.” In <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>, edited by DVS Media GmbH, Vol. 369. DVS Berichte, 2023.","ieee":"K. Tews, S. Çavdar, and G. Meschut, “Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie,” in <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>, vol. 369, DVS Media GmbH, Ed. 2023.","ama":"Tews K, Çavdar S, Meschut G. Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie. In: DVS Media GmbH, ed. <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>. Vol 369. DVS Berichte. ; 2023.","apa":"Tews, K., Çavdar, S., &#38; Meschut, G. (2023). Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie. In DVS Media GmbH (Ed.), <i>Klebtechnische Doktorandenseminare 2020 - 2022</i> (Vol. 369).","short":"K. Tews, S. Çavdar, G. Meschut, in: DVS Media GmbH (Ed.), Klebtechnische Doktorandenseminare 2020 - 2022, 2023.","mla":"Tews, Karina, et al. “Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie.” <i>Klebtechnische Doktorandenseminare 2020 - 2022</i>, edited by DVS Media GmbH, vol. 369, 2023.","bibtex":"@inbook{Tews_Çavdar_Meschut_2023, series={DVS Berichte}, title={Experimentelle Untersuchung des Ermüdungsverhaltens von strukturellen Klebverbindungen und Berechnung der Lebensdauer unter Berücksichtigung der Spannungsanisotropie}, volume={369}, booktitle={Klebtechnische Doktorandenseminare 2020 - 2022}, author={Tews, Karina and Çavdar, Serkan and Meschut, Gerson}, editor={DVS Media GmbH}, year={2023}, collection={DVS Berichte} }"},"intvolume":"       369","corporate_editor":["DVS Media GmbH"],"year":"2023","quality_controlled":"1","publication_identifier":{"isbn":["978-3-96144-139-6"]}},{"type":"book_chapter","publication":"11. - 13- Doktorandenseminar Klebtechnik","status":"public","_id":"50275","series_title":"DVS-Berichte","user_id":"41235","department":[{"_id":"157"}],"language":[{"iso":"eng"}],"publication_identifier":{"isbn":["978-3-96114-139-6"]},"quality_controlled":"1","year":"2023","citation":{"ama":"Schmolke T, Meschut G. Untersuchung der Dichtheitseigenschaften hybridgefügter Mischbauverbindungen für den Einsatz in Batterieghäusen für Elektrofahrzeuge. In: DVS Media GmbH, ed. <i>11. - 13- Doktorandenseminar Klebtechnik</i>. Vol Band 369. DVS-Berichte. ; 2023.","chicago":"Schmolke, Tobias, and Gerson Meschut. “Untersuchung Der Dichtheitseigenschaften Hybridgefügter Mischbauverbindungen Für Den Einsatz in Batterieghäusen Für Elektrofahrzeuge.” In <i>11. - 13- Doktorandenseminar Klebtechnik</i>, edited by DVS Media GmbH, Vol. Band 369. DVS-Berichte, 2023.","ieee":"T. Schmolke and G. Meschut, “Untersuchung der Dichtheitseigenschaften hybridgefügter Mischbauverbindungen für den Einsatz in Batterieghäusen für Elektrofahrzeuge,” in <i>11. - 13- Doktorandenseminar Klebtechnik</i>, vol. Band 369, DVS Media GmbH, Ed. 2023.","apa":"Schmolke, T., &#38; Meschut, G. (2023). Untersuchung der Dichtheitseigenschaften hybridgefügter Mischbauverbindungen für den Einsatz in Batterieghäusen für Elektrofahrzeuge. In DVS Media GmbH (Ed.), <i>11. - 13- Doktorandenseminar Klebtechnik: Vol. Band 369</i>.","bibtex":"@inbook{Schmolke_Meschut_2023, series={DVS-Berichte}, title={Untersuchung der Dichtheitseigenschaften hybridgefügter Mischbauverbindungen für den Einsatz in Batterieghäusen für Elektrofahrzeuge}, volume={Band 369}, booktitle={11. - 13- Doktorandenseminar Klebtechnik}, author={Schmolke, Tobias and Meschut, Gerson}, editor={DVS Media GmbH}, year={2023}, collection={DVS-Berichte} }","mla":"Schmolke, Tobias, and Gerson Meschut. “Untersuchung Der Dichtheitseigenschaften Hybridgefügter Mischbauverbindungen Für Den Einsatz in Batterieghäusen Für Elektrofahrzeuge.” <i>11. - 13- Doktorandenseminar Klebtechnik</i>, edited by DVS Media GmbH, vol. Band 369, 2023.","short":"T. Schmolke, G. Meschut, in: DVS Media GmbH (Ed.), 11. - 13- Doktorandenseminar Klebtechnik, 2023."},"corporate_editor":["DVS Media GmbH"],"date_updated":"2024-01-08T06:50:38Z","author":[{"id":"44759","full_name":"Schmolke, Tobias","last_name":"Schmolke","first_name":"Tobias"},{"first_name":"Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut","full_name":"Meschut, Gerson","id":"32056"}],"date_created":"2024-01-08T06:50:32Z","volume":"Band 369","title":"Untersuchung der Dichtheitseigenschaften hybridgefügter Mischbauverbindungen für den Einsatz in Batterieghäusen für Elektrofahrzeuge"},{"title":"Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung","date_created":"2024-01-08T06:53:04Z","author":[{"full_name":"Göddecke, Johannes","id":"59070","last_name":"Göddecke","first_name":"Johannes"},{"full_name":"Meschut, Gerson","id":"32056","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson"}],"volume":"Band 369","date_updated":"2024-01-08T06:53:08Z","citation":{"ama":"Göddecke J, Meschut G. Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. In: DVS Media GmbH, ed. <i>11. - 13- Doktorandenseminar Klebtechnik</i>. Vol Band 369. DVS-Berichte. ; 2023.","chicago":"Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung Der Dämpfungseigenschaften Geklebter Strukturen Unter Dynamischer Beanspruchung.” In <i>11. - 13- Doktorandenseminar Klebtechnik</i>, edited by DVS Media GmbH, Vol. Band 369. DVS-Berichte, 2023.","ieee":"J. Göddecke and G. Meschut, “Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung,” in <i>11. - 13- Doktorandenseminar Klebtechnik</i>, vol. Band 369, DVS Media GmbH, Ed. 2023.","apa":"Göddecke, J., &#38; Meschut, G. (2023). Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung. In DVS Media GmbH (Ed.), <i>11. - 13- Doktorandenseminar Klebtechnik: Vol. Band 369</i>.","short":"J. Göddecke, G. Meschut, in: DVS Media GmbH (Ed.), 11. - 13- Doktorandenseminar Klebtechnik, 2023.","bibtex":"@inbook{Göddecke_Meschut_2023, series={DVS-Berichte}, title={Experimentelle Untersuchung der Dämpfungseigenschaften geklebter Strukturen unter dynamischer Beanspruchung}, volume={Band 369}, booktitle={11. - 13- Doktorandenseminar Klebtechnik}, author={Göddecke, Johannes and Meschut, Gerson}, editor={DVS Media GmbH}, year={2023}, collection={DVS-Berichte} }","mla":"Göddecke, Johannes, and Gerson Meschut. “Experimentelle Untersuchung Der Dämpfungseigenschaften Geklebter Strukturen Unter Dynamischer Beanspruchung.” <i>11. - 13- Doktorandenseminar Klebtechnik</i>, edited by DVS Media GmbH, vol. Band 369, 2023."},"corporate_editor":["DVS Media GmbH"],"year":"2023","quality_controlled":"1","publication_identifier":{"isbn":["978-3-96114-139-6"]},"language":[{"iso":"eng"}],"user_id":"41235","series_title":"DVS-Berichte","department":[{"_id":"157"}],"_id":"50276","status":"public","type":"book_chapter","publication":"11. - 13- Doktorandenseminar Klebtechnik"},{"volume":"Band 369","author":[{"last_name":"Chudalla","id":"41235","full_name":"Chudalla, Nick","first_name":"Nick"},{"first_name":"Gerson","id":"32056","full_name":"Meschut, Gerson","orcid":"0000-0002-2763-1246","last_name":"Meschut"}],"date_created":"2024-01-08T06:48:01Z","date_updated":"2024-01-08T06:53:14Z","title":"Effizientes Lösen von Klebverbindungen in der Fahrzeuginstandsetzung","quality_controlled":"1","publication_identifier":{"isbn":["978-3-96114-139-6"]},"corporate_editor":["DVS Media GmbH"],"citation":{"ama":"Chudalla N, Meschut G. Effizientes Lösen von Klebverbindungen in der Fahrzeuginstandsetzung. In: DVS Media GmbH, ed. <i>11. - 13- Doktorandenseminar Klebtechnik</i>. Vol Band 369. DVS-Berichte. ; 2023.","ieee":"N. Chudalla and G. Meschut, “Effizientes Lösen von Klebverbindungen in der Fahrzeuginstandsetzung,” in <i>11. - 13- Doktorandenseminar Klebtechnik</i>, vol. Band 369, DVS Media GmbH, Ed. 2023.","chicago":"Chudalla, Nick, and Gerson Meschut. “Effizientes Lösen von Klebverbindungen in Der Fahrzeuginstandsetzung.” In <i>11. - 13- Doktorandenseminar Klebtechnik</i>, edited by DVS Media GmbH, Vol. Band 369. DVS-Berichte, 2023.","apa":"Chudalla, N., &#38; Meschut, G. (2023). Effizientes Lösen von Klebverbindungen in der Fahrzeuginstandsetzung. In DVS Media GmbH (Ed.), <i>11. - 13- Doktorandenseminar Klebtechnik: Vol. Band 369</i>.","short":"N. Chudalla, G. Meschut, in: DVS Media GmbH (Ed.), 11. - 13- Doktorandenseminar Klebtechnik, 2023.","bibtex":"@inbook{Chudalla_Meschut_2023, series={DVS-Berichte}, title={Effizientes Lösen von Klebverbindungen in der Fahrzeuginstandsetzung}, volume={Band 369}, booktitle={11. - 13- Doktorandenseminar Klebtechnik}, author={Chudalla, Nick and Meschut, Gerson}, editor={DVS Media GmbH}, year={2023}, collection={DVS-Berichte} }","mla":"Chudalla, Nick, and Gerson Meschut. “Effizientes Lösen von Klebverbindungen in Der Fahrzeuginstandsetzung.” <i>11. - 13- Doktorandenseminar Klebtechnik</i>, edited by DVS Media GmbH, vol. Band 369, 2023."},"year":"2023","department":[{"_id":"157"}],"user_id":"41235","series_title":"DVS-Berichte","_id":"50274","language":[{"iso":"eng"}],"publication":"11. - 13- Doktorandenseminar Klebtechnik","type":"book_chapter","status":"public"},{"title":"Recalibration of limits to growth: An update of the World3 model","doi":"10.1111/jiec.13442","publisher":"Wiley","date_updated":"2024-01-09T09:26:25Z","date_created":"2024-01-09T09:26:00Z","author":[{"last_name":"Nebel","full_name":"Nebel, Arjuna","first_name":"Arjuna"},{"full_name":"Kling, Alexander","last_name":"Kling","first_name":"Alexander"},{"last_name":"Willamowski","full_name":"Willamowski, Ruben","first_name":"Ruben"},{"last_name":"Schell","full_name":"Schell, Tim","first_name":"Tim"}],"year":"2023","citation":{"ieee":"A. Nebel, A. Kling, R. Willamowski, and T. Schell, “Recalibration of limits to growth: An update of the World3 model,” <i>Journal of Industrial Ecology</i>, 2023, doi: <a href=\"https://doi.org/10.1111/jiec.13442\">10.1111/jiec.13442</a>.","chicago":"Nebel, Arjuna, Alexander Kling, Ruben Willamowski, and Tim Schell. “Recalibration of Limits to Growth: An Update of the World3 Model.” <i>Journal of Industrial Ecology</i>, 2023. <a href=\"https://doi.org/10.1111/jiec.13442\">https://doi.org/10.1111/jiec.13442</a>.","ama":"Nebel A, Kling A, Willamowski R, Schell T. Recalibration of limits to growth: An update of the World3 model. <i>Journal of Industrial Ecology</i>. Published online 2023. doi:<a href=\"https://doi.org/10.1111/jiec.13442\">10.1111/jiec.13442</a>","apa":"Nebel, A., Kling, A., Willamowski, R., &#38; Schell, T. (2023). Recalibration of limits to growth: An update of the World3 model. <i>Journal of Industrial Ecology</i>. <a href=\"https://doi.org/10.1111/jiec.13442\">https://doi.org/10.1111/jiec.13442</a>","mla":"Nebel, Arjuna, et al. “Recalibration of Limits to Growth: An Update of the World3 Model.” <i>Journal of Industrial Ecology</i>, Wiley, 2023, doi:<a href=\"https://doi.org/10.1111/jiec.13442\">10.1111/jiec.13442</a>.","bibtex":"@article{Nebel_Kling_Willamowski_Schell_2023, title={Recalibration of limits to growth: An update of the World3 model}, DOI={<a href=\"https://doi.org/10.1111/jiec.13442\">10.1111/jiec.13442</a>}, journal={Journal of Industrial Ecology}, publisher={Wiley}, author={Nebel, Arjuna and Kling, Alexander and Willamowski, Ruben and Schell, Tim}, year={2023} }","short":"A. Nebel, A. Kling, R. Willamowski, T. Schell, Journal of Industrial Ecology (2023)."},"publication_identifier":{"issn":["1088-1980","1530-9290"]},"publication_status":"published","keyword":["General Social Sciences","General Environmental Science"],"language":[{"iso":"eng"}],"_id":"50368","project":[{"name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"user_id":"67287","abstract":[{"text":"<jats:title>Abstract</jats:title><jats:p>After 50 years, there is still an ongoing debate about the Limits to Growth (LtG) study. This paper recalibrates the 2005 World3‐03 model. The input parameters are changed to better match empirical data on world development. An iterative method is used to compute and optimize different parameter sets. This improved parameter set results in a World3 simulation that shows the same overshoot and collapse mode in the coming decade as the original business as usual scenario of the LtG standard run. The main effect of the recalibration update is to raise the peaks of most variables and move them a few years into the future. The parameters with the largest relative changes are those related to industrial capital lifetime, pollution transmission delay, and urban‐industrial land development time.</jats:p>","lang":"eng"}],"status":"public","publication":"Journal of Industrial Ecology","type":"journal_article"},{"date_updated":"2024-01-11T09:12:17Z","supervisor":[{"first_name":"Thomas","last_name":"Tröster","id":"553","full_name":"Tröster, Thomas"}],"date_created":"2024-01-11T09:12:01Z","author":[{"first_name":"Tim","full_name":"Stallmeister, Tim","id":"45538","last_name":"Stallmeister"}],"title":"Verfahrensentwicklung zur einstufigen Herstellung von biegebelastbaren Hybridstrukturen im Fließpressprozess","doi":"10.17619/UNIPB/1-1670","year":"2023","citation":{"ama":"Stallmeister T. <i>Verfahrensentwicklung Zur Einstufigen Herstellung von Biegebelastbaren Hybridstrukturen Im Fließpressprozess</i>.; 2023. doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1670\">10.17619/UNIPB/1-1670</a>","ieee":"T. Stallmeister, <i>Verfahrensentwicklung zur einstufigen Herstellung von biegebelastbaren Hybridstrukturen im Fließpressprozess</i>. 2023.","chicago":"Stallmeister, Tim. <i>Verfahrensentwicklung Zur Einstufigen Herstellung von Biegebelastbaren Hybridstrukturen Im Fließpressprozess</i>, 2023. <a href=\"https://doi.org/10.17619/UNIPB/1-1670\">https://doi.org/10.17619/UNIPB/1-1670</a>.","bibtex":"@book{Stallmeister_2023, title={Verfahrensentwicklung zur einstufigen Herstellung von biegebelastbaren Hybridstrukturen im Fließpressprozess}, DOI={<a href=\"https://doi.org/10.17619/UNIPB/1-1670\">10.17619/UNIPB/1-1670</a>}, author={Stallmeister, Tim}, year={2023} }","mla":"Stallmeister, Tim. <i>Verfahrensentwicklung Zur Einstufigen Herstellung von Biegebelastbaren Hybridstrukturen Im Fließpressprozess</i>. 2023, doi:<a href=\"https://doi.org/10.17619/UNIPB/1-1670\">10.17619/UNIPB/1-1670</a>.","short":"T. Stallmeister, Verfahrensentwicklung Zur Einstufigen Herstellung von Biegebelastbaren Hybridstrukturen Im Fließpressprozess, 2023.","apa":"Stallmeister, T. (2023). <i>Verfahrensentwicklung zur einstufigen Herstellung von biegebelastbaren Hybridstrukturen im Fließpressprozess</i>. <a href=\"https://doi.org/10.17619/UNIPB/1-1670\">https://doi.org/10.17619/UNIPB/1-1670</a>"},"_id":"50448","user_id":"45543","department":[{"_id":"9"},{"_id":"321"},{"_id":"149"}],"language":[{"iso":"eng"}],"type":"dissertation","abstract":[{"text":"Hybridstrukturen bieten bei Anwendungen mit Biegebeanspruchung ein großes Leichtbaupotenzial, erfordern jedoch komplexe und zum Teil mehrschrittige Fertigungsverfahren. In dieser Arbeit wird ein Verfahren entwickelt, das auf Basis des Fließpressprozesses biegebelastbare Hybridbalken in einem Schritt herstellt. Dazu wird ein Versuchsträger entwickelt, der die Komplexität von Realbauteilen abbildet und für zerstörende sowie zerstörungsfreie Charakterisierungsmethoden geeignet ist. Der Versuchsträger besteht aus einer funktionalisierten Kernstruktur aus Glasfasermattenverstärktem Polypropylen und äußeren Metallgurten aus Stahl- und Aluminiumlegierungen, die mit einem Haftvermittlerfilm versehen sind. Anhand des Versuchsträgers wird ein Fließpresswerkzeug und eine instrumentierte Fertigungsanlage entwickelt, mit der die Hybridstrukturen prototypisch hergestellt werden. Zur Prozessoptimierung wird die Verbindung mechanisch und optisch auf Probenebene analysiert. Weiterhin erfolgen Bauteiluntersuchungen anhand von Dreipunktbiegetests, mit denen das strukturelle Verhalten der Hybridbalken charakterisiert wird. Es wird festgestellt, dass sich mit dem einstufigen Fließpressverfahren sehr gute Verbundfestigkeiten erzielen lassen. Die Temperatur- und Druckführung weisen dabei einen großen Einfluss auf das Ergebnis auf. Anhand der Bauteiluntersuchungen wird bestätigt, dass mit dem entwickelten Verfahren Hybridbalken in nur einem Schritt gefertigt werden können, die vergleichbare mechanische Eigenschaften zu Hybridstrukturkonzepten aus mehrschrittigen Fertigungsverfahren aufweisen.","lang":"ger"},{"lang":"eng","text":"Hybrid structures provide a high potential for lightweight design in applications with bending loads, but require complex and sometimes multi-step manufacturing processes. In this work, a process is developed that produces hybrid beams with high bending strength in one step based on the compression moulding process. For this purpose, a prototype beam is developed that represents the complexity of real components and is suitable for destructive as well as non-destructive characterisation methods. The prototype beam consists of a functionalised core structure made of glass mat reinforced polypropylene and outer metal belts made of steel and aluminium alloys, which are coated with an adhesive film. A moulding tool and an instrumented production line are developed, with which the hybrid structures are prototypically manufactured. For process optimisation, the joint is analysed mechanically and optically at sample level. Furthermore, component investigations are carried out using three-point bending tests to characterise the structural behaviour of the hybrid beams. It is found that very good joint strengths can be achieved with the one-step compression moulding process. The temperature and pressure control have a major influence on the result. Based on the component tests, it is confirmed that the developed manufacturing process can be used to produce hybrid beams in just one step that have comparable mechanical properties to hybrid structure concepts from multi-step manufacturing processes."}],"status":"public"},{"title":"Regenerative Energien für einen effizienten Betrieb von Presshärtelinien","author":[{"first_name":"Lukas","last_name":"Knorr","full_name":"Knorr, Lukas","id":"90391"},{"first_name":"André","id":"45189","full_name":"Jungeilges, André","last_name":"Jungeilges"},{"full_name":"Pfeifer, Florian","id":"22717","last_name":"Pfeifer","first_name":"Florian"},{"first_name":"Sascha Christian","orcid":"0000-0001-6679-0453","last_name":"Burmeister","id":"32685","full_name":"Burmeister, Sascha Christian"},{"first_name":"Henning","id":"86954","full_name":"Meschede, Henning","orcid":"0000-0002-1538-089X","last_name":"Meschede"}],"date_created":"2023-10-19T10:34:14Z","date_updated":"2024-01-11T09:05:19Z","publisher":"4. Aachener Ofenbau- und Thermoprozess-Kolloquium","citation":{"ama":"Knorr L, Jungeilges A, Pfeifer F, Burmeister SC, Meschede H. <i>Regenerative Energien für einen effizienten Betrieb von Presshärtelinien</i>. 4. Aachener Ofenbau- und Thermoprozess-Kolloquium; 2023.","chicago":"Knorr, Lukas, André Jungeilges, Florian Pfeifer, Sascha Christian Burmeister, and Henning Meschede. <i>Regenerative Energien für einen effizienten Betrieb von Presshärtelinien</i>. Aachen: 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.","ieee":"L. Knorr, A. Jungeilges, F. Pfeifer, S. C. Burmeister, and H. Meschede, <i>Regenerative Energien für einen effizienten Betrieb von Presshärtelinien</i>. Aachen: 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.","short":"L. Knorr, A. Jungeilges, F. Pfeifer, S.C. Burmeister, H. Meschede, Regenerative Energien für einen effizienten Betrieb von Presshärtelinien, 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, Aachen, 2023.","mla":"Knorr, Lukas, et al. <i>Regenerative Energien für einen effizienten Betrieb von Presshärtelinien</i>. 4. Aachener Ofenbau- und Thermoprozess-Kolloquium, 2023.","bibtex":"@book{Knorr_Jungeilges_Pfeifer_Burmeister_Meschede_2023, place={Aachen}, title={Regenerative Energien für einen effizienten Betrieb von Presshärtelinien}, publisher={4. Aachener Ofenbau- und Thermoprozess-Kolloquium}, author={Knorr, Lukas and Jungeilges, André and Pfeifer, Florian and Burmeister, Sascha Christian and Meschede, Henning}, year={2023} }","apa":"Knorr, L., Jungeilges, A., Pfeifer, F., Burmeister, S. C., &#38; Meschede, H. (2023). <i>Regenerative Energien für einen effizienten Betrieb von Presshärtelinien</i>. 4. Aachener Ofenbau- und Thermoprozess-Kolloquium."},"year":"2023","place":"Aachen","language":[{"iso":"ger"}],"department":[{"_id":"644"},{"_id":"149"},{"_id":"277"},{"_id":"321"}],"user_id":"45189","_id":"48335","status":"public","type":"misc"},{"status":"public","type":"misc","language":[{"iso":"eng"}],"_id":"49106","department":[{"_id":"149"},{"_id":"321"}],"user_id":"45189","year":"2023","place":"Bad Nauheim","citation":{"chicago":"Jungeilges, André. <i>Possibilities of Sustainable Heating Methods for Press Hardening Processes</i>. Bad Nauheim: Car Body Parts - Automotive Circle Conference, 2023.","ieee":"A. Jungeilges, <i>Possibilities of Sustainable Heating Methods for Press Hardening Processes</i>. Bad Nauheim: Car Body Parts - Automotive Circle Conference, 2023.","ama":"Jungeilges A. <i>Possibilities of Sustainable Heating Methods for Press Hardening Processes</i>. Car Body Parts - Automotive Circle Conference; 2023.","apa":"Jungeilges, A. (2023). <i>Possibilities of Sustainable Heating Methods for Press Hardening Processes</i>. Car Body Parts - Automotive Circle Conference.","mla":"Jungeilges, André. <i>Possibilities of Sustainable Heating Methods for Press Hardening Processes</i>. Car Body Parts - Automotive Circle Conference, 2023.","short":"A. Jungeilges, Possibilities of Sustainable Heating Methods for Press Hardening Processes, Car Body Parts - Automotive Circle Conference, Bad Nauheim, 2023.","bibtex":"@book{Jungeilges_2023, place={Bad Nauheim}, title={Possibilities of Sustainable Heating Methods for Press Hardening Processes}, publisher={Car Body Parts - Automotive Circle Conference}, author={Jungeilges, André}, year={2023} }"},"title":"Possibilities of Sustainable Heating Methods for Press Hardening Processes","publisher":"Car Body Parts - Automotive Circle Conference","date_updated":"2024-01-11T09:04:30Z","author":[{"first_name":"André","id":"45189","full_name":"Jungeilges, André","last_name":"Jungeilges"}],"date_created":"2023-11-21T14:27:25Z"},{"language":[{"iso":"eng"}],"_id":"36840","user_id":"55686","department":[{"_id":"157"}],"status":"public","type":"conference","title":"Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches","doi":"10.1016/j.procir.2023.09.019","conference":{"name":"56th CIRP Conference on Manufacturing Systems","location":"South Africa"},"date_updated":"2024-01-12T11:28:29Z","author":[{"first_name":"Stefan","last_name":"Neumann","full_name":"Neumann, Stefan","id":"54897"},{"last_name":"Wippermann","full_name":"Wippermann, Jan","id":"55686","first_name":"Jan"},{"full_name":"Meschut, Gerson","id":"32056","orcid":"0000-0002-2763-1246","last_name":"Meschut","first_name":"Gerson"},{"last_name":"Stepputat","full_name":"Stepputat, Marten","first_name":"Marten"},{"full_name":"Beuss, Florian","last_name":"Beuss","first_name":"Florian"},{"first_name":"Wilko","last_name":"Flügge","full_name":"Flügge, Wilko"}],"date_created":"2023-01-14T14:42:53Z","year":"2023","citation":{"apa":"Neumann, S., Wippermann, J., Meschut, G., Stepputat, M., Beuss, F., &#38; Flügge, W. (n.d.). <i>Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches</i>. 56th CIRP Conference on Manufacturing Systems, South Africa. <a href=\"https://doi.org/10.1016/j.procir.2023.09.019\">https://doi.org/10.1016/j.procir.2023.09.019</a>","bibtex":"@inproceedings{Neumann_Wippermann_Meschut_Stepputat_Beuss_Flügge, title={Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches}, DOI={<a href=\"https://doi.org/10.1016/j.procir.2023.09.019\">10.1016/j.procir.2023.09.019</a>}, author={Neumann, Stefan and Wippermann, Jan and Meschut, Gerson and Stepputat, Marten and Beuss, Florian and Flügge, Wilko} }","short":"S. Neumann, J. Wippermann, G. Meschut, M. Stepputat, F. Beuss, W. Flügge, in: n.d.","mla":"Neumann, Stefan, et al. <i>Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches</i>. doi:<a href=\"https://doi.org/10.1016/j.procir.2023.09.019\">10.1016/j.procir.2023.09.019</a>.","ama":"Neumann S, Wippermann J, Meschut G, Stepputat M, Beuss F, Flügge W. Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches. doi:<a href=\"https://doi.org/10.1016/j.procir.2023.09.019\">10.1016/j.procir.2023.09.019</a>","chicago":"Neumann, Stefan, Jan Wippermann, Gerson Meschut, Marten Stepputat, Florian Beuss, and Wilko Flügge. “Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches,” n.d. <a href=\"https://doi.org/10.1016/j.procir.2023.09.019\">https://doi.org/10.1016/j.procir.2023.09.019</a>.","ieee":"S. Neumann, J. Wippermann, G. Meschut, M. Stepputat, F. Beuss, and W. Flügge, “Flexible Automation through Robot-Assisted Mechanical Joining in Small Batches,” presented at the 56th CIRP Conference on Manufacturing Systems, South Africa, doi: <a href=\"https://doi.org/10.1016/j.procir.2023.09.019\">10.1016/j.procir.2023.09.019</a>."},"publication_status":"submitted","quality_controlled":"1"},{"title":"A computation of D(9) using FPGA Supercomputing","date_updated":"2024-01-22T09:56:42Z","author":[{"last_name":"Van Hirtum","full_name":"Van Hirtum, Lennart","first_name":"Lennart"},{"first_name":"Patrick","last_name":"De Causmaecker","full_name":"De Causmaecker, Patrick"},{"last_name":"Goemaere","full_name":"Goemaere, Jens","first_name":"Jens"},{"last_name":"Kenter","full_name":"Kenter, Tobias","id":"3145","first_name":"Tobias"},{"first_name":"Heinrich","last_name":"Riebler","id":"8961","full_name":"Riebler, Heinrich"},{"full_name":"Lass, Michael","id":"24135","orcid":"0000-0002-5708-7632","last_name":"Lass","first_name":"Michael"},{"first_name":"Christian","full_name":"Plessl, Christian","id":"16153","orcid":"0000-0001-5728-9982","last_name":"Plessl"}],"date_created":"2023-04-08T11:05:29Z","year":"2023","citation":{"ama":"Van Hirtum L, De Causmaecker P, Goemaere J, et al. A computation of D(9) using FPGA Supercomputing. <i>arXiv:230403039</i>. Published online 2023.","ieee":"L. Van Hirtum <i>et al.</i>, “A computation of D(9) using FPGA Supercomputing,” <i>arXiv:2304.03039</i>. 2023.","chicago":"Van Hirtum, Lennart, Patrick De Causmaecker, Jens Goemaere, Tobias Kenter, Heinrich Riebler, Michael Lass, and Christian Plessl. “A Computation of D(9) Using FPGA Supercomputing.” <i>ArXiv:2304.03039</i>, 2023.","apa":"Van Hirtum, L., De Causmaecker, P., Goemaere, J., Kenter, T., Riebler, H., Lass, M., &#38; Plessl, C. (2023). A computation of D(9) using FPGA Supercomputing. In <i>arXiv:2304.03039</i>.","short":"L. Van Hirtum, P. De Causmaecker, J. Goemaere, T. Kenter, H. Riebler, M. Lass, C. Plessl, ArXiv:2304.03039 (2023).","mla":"Van Hirtum, Lennart, et al. “A Computation of D(9) Using FPGA Supercomputing.” <i>ArXiv:2304.03039</i>, 2023.","bibtex":"@article{Van Hirtum_De Causmaecker_Goemaere_Kenter_Riebler_Lass_Plessl_2023, title={A computation of D(9) using FPGA Supercomputing}, journal={arXiv:2304.03039}, author={Van Hirtum, Lennart and De Causmaecker, Patrick and Goemaere, Jens and Kenter, Tobias and Riebler, Heinrich and Lass, Michael and Plessl, Christian}, year={2023} }"},"language":[{"iso":"eng"}],"external_id":{"arxiv":["2304.03039"]},"_id":"43439","project":[{"name":"PC2: Computing Resources Provided by the Paderborn Center for Parallel Computing","_id":"52"}],"department":[{"_id":"27"},{"_id":"518"}],"user_id":"3145","abstract":[{"text":"This preprint makes the claim of having computed the $9^{th}$ Dedekind\r\nNumber. This was done by building an efficient FPGA Accelerator for the core\r\noperation of the process, and parallelizing it on the Noctua 2 Supercluster at\r\nPaderborn University. The resulting value is\r\n286386577668298411128469151667598498812366. This value can be verified in two\r\nsteps. We have made the data file containing the 490M results available, each\r\nof which can be verified separately on CPU, and the whole file sums to our\r\nproposed value.","lang":"eng"}],"status":"public","publication":"arXiv:2304.03039","type":"preprint"},{"title":"Approximate simulation of the hysteresis friction of radial shaft seals","conference":{"location":"Göttingen","end_date":"2023-09-27","start_date":"2023-09-25","name":"64. Tribologie-Fachtagung 2023"},"date_updated":"2024-01-22T10:00:41Z","date_created":"2024-01-02T10:22:43Z","author":[{"first_name":"Tobias","last_name":"Bührmann","full_name":"Bührmann, Tobias","id":"51794"},{"first_name":"Balázs","full_name":"Magyar, Balázs","id":"97759","last_name":"Magyar"}],"year":"2023","citation":{"chicago":"Bührmann, Tobias, and Balázs Magyar. “Approximate Simulation of the Hysteresis Friction of Radial Shaft Seals.” In <i>64. Tribologie-Fachtagung 2023</i>, 2023.","ieee":"T. Bührmann and B. Magyar, “Approximate simulation of the hysteresis friction of radial shaft seals,” presented at the 64. Tribologie-Fachtagung 2023, Göttingen, 2023.","mla":"Bührmann, Tobias, and Balázs Magyar. “Approximate Simulation of the Hysteresis Friction of Radial Shaft Seals.” <i>64. Tribologie-Fachtagung 2023</i>, 2023.","short":"T. Bührmann, B. Magyar, in: 64. Tribologie-Fachtagung 2023, 2023.","bibtex":"@inproceedings{Bührmann_Magyar_2023, title={Approximate simulation of the hysteresis friction of radial shaft seals}, booktitle={64. Tribologie-Fachtagung 2023}, author={Bührmann, Tobias and Magyar, Balázs}, year={2023} }","ama":"Bührmann T, Magyar B. Approximate simulation of the hysteresis friction of radial shaft seals. In: <i>64. Tribologie-Fachtagung 2023</i>. ; 2023.","apa":"Bührmann, T., &#38; Magyar, B. (2023). Approximate simulation of the hysteresis friction of radial shaft seals. <i>64. Tribologie-Fachtagung 2023</i>. 64. Tribologie-Fachtagung 2023, Göttingen."},"language":[{"iso":"eng"}],"_id":"50076","department":[{"_id":"146"}],"user_id":"51794","status":"public","publication":"64. Tribologie-Fachtagung 2023","type":"conference"},{"date_updated":"2024-02-01T16:04:33Z","date_created":"2024-02-01T16:03:41Z","author":[{"first_name":"Claus","last_name":"Scheidemann","full_name":"Scheidemann, Claus","id":"38259"},{"first_name":"Oliver Ernst Caspar","full_name":"Hagedorn, Oliver Ernst Caspar","id":"53321","last_name":"Hagedorn"},{"first_name":"Tobias","id":"210","full_name":"Hemsel, Tobias","last_name":"Hemsel"},{"first_name":"Walter","full_name":"Sextro, Walter","id":"21220","last_name":"Sextro"}],"title":"Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process","conference":{"start_date":"2023-10-31","name":"International Conference on Functional Materials & Devices 2023 (ICFMD 2023)","location":"Jeju, Korea","end_date":"2023-11-03"},"year":"2023","citation":{"chicago":"Scheidemann, Claus, Oliver Ernst Caspar Hagedorn, Tobias Hemsel, and Walter Sextro. “Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process,” 2023.","ieee":"C. Scheidemann, O. E. C. Hagedorn, T. Hemsel, and W. Sextro, “Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process,” presented at the International Conference on Functional Materials &#38; Devices 2023 (ICFMD 2023), Jeju, Korea, 2023.","apa":"Scheidemann, C., Hagedorn, O. E. C., Hemsel, T., &#38; Sextro, W. (2023). <i>Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process</i>. International Conference on Functional Materials &#38; Devices 2023 (ICFMD 2023), Jeju, Korea.","ama":"Scheidemann C, Hagedorn OEC, Hemsel T, Sextro W. Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process. In: ; 2023.","bibtex":"@inproceedings{Scheidemann_Hagedorn_Hemsel_Sextro_2023, title={Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process}, author={Scheidemann, Claus and Hagedorn, Oliver Ernst Caspar and Hemsel, Tobias and Sextro, Walter}, year={2023} }","mla":"Scheidemann, Claus, et al. <i>Experimental Investigation of Bond Formation and Wire Deformation in the Ultrasonic Wire Bonding Process</i>. 2023.","short":"C. Scheidemann, O.E.C. Hagedorn, T. Hemsel, W. Sextro, in: 2023."},"_id":"51119","department":[{"_id":"151"}],"user_id":"38259","language":[{"iso":"eng"}],"type":"conference_abstract","status":"public"}]