---
_id: '30222'
author:
- first_name: Marius
full_name: Striewe, Marius
id: '30228'
last_name: Striewe
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Lars
full_name: Schmelzle, Lars
last_name: Schmelzle
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Gunnar
full_name: Possart, Gunnar
last_name: Possart
- first_name: Paul
full_name: Steinmann, Paul
last_name: Steinmann
citation:
ama: 'Striewe M, Meschut G, Schmelzle L, Mergheim J, Possart G, Steinmann P. Experimentelle
und numerische Untersuchung des Einflusses variabler Betriebstemperaturen auf
das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung.
In: 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik. ; 2022.'
apa: 'Striewe, M., Meschut, G., Schmelzle, L., Mergheim, J., Possart, G., &
Steinmann, P. (2022). Experimentelle und numerische Untersuchung des Einflusses
variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller
Klebverbindungen unter Crashbelastung. 22. Kolloquium: Gemeinsame Forschung
in der Klebtechnik. 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik.'
bibtex: '@inproceedings{Striewe_Meschut_Schmelzle_Mergheim_Possart_Steinmann_2022,
title={Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen
auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung},
booktitle={22. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Striewe,
Marius and Meschut, Gerson and Schmelzle, Lars and Mergheim, Julia and Possart,
Gunnar and Steinmann, Paul}, year={2022} }'
chicago: 'Striewe, Marius, Gerson Meschut, Lars Schmelzle, Julia Mergheim, Gunnar
Possart, and Paul Steinmann. “Experimentelle und numerische Untersuchung des Einflusses
variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller
Klebverbindungen unter Crashbelastung.” In 22. Kolloquium: Gemeinsame Forschung
in der Klebtechnik, 2022.'
ieee: 'M. Striewe, G. Meschut, L. Schmelzle, J. Mergheim, G. Possart, and P. Steinmann,
“Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen
auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung,”
presented at the 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.'
mla: 'Striewe, Marius, et al. “Experimentelle und numerische Untersuchung des Einflusses
variabler Betriebstemperaturen auf das Trag- und Versagensverhalten struktureller
Klebverbindungen unter Crashbelastung.” 22. Kolloquium: Gemeinsame Forschung
in der Klebtechnik, 2022.'
short: 'M. Striewe, G. Meschut, L. Schmelzle, J. Mergheim, G. Possart, P. Steinmann,
in: 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2022.'
conference:
end_date: 2022-02-16
name: '22. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2022-02-15
date_created: 2022-03-10T08:44:01Z
date_updated: 2022-03-10T08:48:06Z
department:
- _id: '157'
language:
- iso: ger
publication: '22. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Experimentelle und numerische Untersuchung des Einflusses variabler Betriebstemperaturen
auf das Trag- und Versagensverhalten struktureller Klebverbindungen unter Crashbelastung
type: conference_abstract
user_id: '30228'
year: '2022'
...
---
_id: '30229'
author:
- first_name: Sven Helge
full_name: Klippstein, Sven Helge
id: '71545'
last_name: Klippstein
citation:
ama: 'Klippstein SH. Reproducibility in Polymer Laser Sintering. In: ; 2022.'
apa: Klippstein, S. H. (2022). Reproducibility in Polymer Laser Sintering.
Public Science Session of the DMRC Technical Meeting Feb 2022, Online.
bibtex: '@inproceedings{Klippstein_2022, title={Reproducibility in Polymer Laser
Sintering}, author={Klippstein, Sven Helge}, year={2022} }'
chicago: Klippstein, Sven Helge. “Reproducibility in Polymer Laser Sintering,” 2022.
ieee: S. H. Klippstein, “Reproducibility in Polymer Laser Sintering,” presented
at the Public Science Session of the DMRC Technical Meeting Feb 2022, Online,
2022.
mla: Klippstein, Sven Helge. Reproducibility in Polymer Laser Sintering.
2022.
short: 'S.H. Klippstein, in: 2022.'
conference:
end_date: 23.02.2022
location: Online
name: Public Science Session of the DMRC Technical Meeting Feb 2022
start_date: 23.02.2022
date_created: 2022-03-10T13:55:25Z
date_updated: 2022-03-10T13:57:10Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
language:
- iso: eng
status: public
title: Reproducibility in Polymer Laser Sintering
type: conference_abstract
user_id: '71545'
year: '2022'
...
---
_id: '28991'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: 'Gräßler I, Pottebaum J. From Agile Strategic Foresight to Sustainable Mechatronic
and Cyber-Physical Systems in Circular Economies. In: Krause D, Heyden E, eds.
Design Methodology for Future Products. Springer; 2022. doi:10.1007/978-3-030-78368-6_1'
apa: Gräßler, I., & Pottebaum, J. (2022). From Agile Strategic Foresight to
Sustainable Mechatronic and Cyber-Physical Systems in Circular Economies. In D.
Krause & E. Heyden (Eds.), Design Methodology for Future Products.
Springer. https://doi.org/10.1007/978-3-030-78368-6_1
bibtex: '@inbook{Gräßler_Pottebaum_2022, place={Cham}, title={From Agile Strategic
Foresight to Sustainable Mechatronic and Cyber-Physical Systems in Circular Economies},
DOI={10.1007/978-3-030-78368-6_1},
booktitle={Design Methodology for Future Products}, publisher={Springer}, author={Gräßler,
Iris and Pottebaum, Jens}, editor={Krause, Dieter and Heyden, Emil}, year={2022}
}'
chicago: 'Gräßler, Iris, and Jens Pottebaum. “From Agile Strategic Foresight to
Sustainable Mechatronic and Cyber-Physical Systems in Circular Economies.” In
Design Methodology for Future Products, edited by Dieter Krause and Emil
Heyden. Cham: Springer, 2022. https://doi.org/10.1007/978-3-030-78368-6_1.'
ieee: 'I. Gräßler and J. Pottebaum, “From Agile Strategic Foresight to Sustainable
Mechatronic and Cyber-Physical Systems in Circular Economies,” in Design Methodology
for Future Products, D. Krause and E. Heyden, Eds. Cham: Springer, 2022.'
mla: Gräßler, Iris, and Jens Pottebaum. “From Agile Strategic Foresight to Sustainable
Mechatronic and Cyber-Physical Systems in Circular Economies.” Design Methodology
for Future Products, edited by Dieter Krause and Emil Heyden, Springer, 2022,
doi:10.1007/978-3-030-78368-6_1.
short: 'I. Gräßler, J. Pottebaum, in: D. Krause, E. Heyden (Eds.), Design Methodology
for Future Products, Springer, Cham, 2022.'
date_created: 2021-12-15T16:36:26Z
date_updated: 2022-03-16T07:32:59Z
department:
- _id: '152'
doi: 10.1007/978-3-030-78368-6_1
editor:
- first_name: Dieter
full_name: Krause, Dieter
last_name: Krause
- first_name: Emil
full_name: Heyden, Emil
last_name: Heyden
language:
- iso: eng
place: Cham
publication: Design Methodology for Future Products
publication_identifier:
isbn:
- '9783030783679'
- '9783030783686'
publication_status: published
publisher: Springer
status: public
title: From Agile Strategic Foresight to Sustainable Mechatronic and Cyber-Physical
Systems in Circular Economies
type: book_chapter
user_id: '405'
year: '2022'
...
---
_id: '30730'
abstract:
- lang: ger
text: "Es ist eine Reibscheibe (18) für\r\neine Reibungskupplung (10) vorgesehen
mit einem zwischen Druckplatten (14, 16, 38) verklemmbaren Rotorring\r\n(32),
Reibbelägen zur Herstellung eines Reibschlusses des\r\nRotorrings (32) mit der
jeweiligen Druckplatte, (14, 16, 38),\r\neinem axial feststehenden Wellenelement
(20) zur Übertragung eines Drehmoments und mindestens einem mit dem\r\nRotorring
(32) und mit dem Wellenelement (20) im Wesentlichen drehfest verbundenen und in
axialer Richtung elastisch nachgiebigen Federelement (34) zur elastischen axialen
Verlagerung des Rotorrings (32) relativ zum Wellenelement (20), wobei der Rotorring
(32) zwischen einer Offenstellung, in welcher das Federelement (34) entspannt
ist,\r\nund einer Schließstellung, in welcher das Federelement\r\n(34) von mindestens
einer Druckplatte (14, 16, 38) verspannt ist, im Wesentlichen in axialer Richtung
parallelverschiebbar ist. Durch den über den vergleichsweise geringen\r\nerforderlichen
axialen Verlagerungsweg federnd an dem\r\naxial unbeweglichen Wellenelement (20)
angebundenen\r\ndie Reibbeläge tragenden Rotorring (32) kann bei geringen\r\nHerstellungskosten
unnötige Reibung vermieden werden,\r\nso dass eine verschleißarme und geräuscharme
lösbare\r\nKoppelung von Bauteilen ermöglicht ist. "
application_date: 2020-09-30
application_number: 10 2020 125 522.5
author:
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
- first_name: Lars Martin
full_name: Blumenthal, Lars Martin
id: '27566'
last_name: Blumenthal
- first_name: Magnus
full_name: Schadomsky, Magnus
id: '11904'
last_name: Schadomsky
citation:
ama: Zimmer D, Blumenthal LM, Schadomsky M. Reibscheibe für eine Reibungskupplung.
Published online 2022.
apa: Zimmer, D., Blumenthal, L. M., & Schadomsky, M. (2022). Reibscheibe
für eine Reibungskupplung.
bibtex: '@article{Zimmer_Blumenthal_Schadomsky_2022, title={Reibscheibe für eine
Reibungskupplung}, author={Zimmer, Detmar and Blumenthal, Lars Martin and Schadomsky,
Magnus}, year={2022} }'
chicago: Zimmer, Detmar, Lars Martin Blumenthal, and Magnus Schadomsky. “Reibscheibe
Für Eine Reibungskupplung,” 2022.
ieee: D. Zimmer, L. M. Blumenthal, and M. Schadomsky, “Reibscheibe für eine Reibungskupplung.”
2022.
mla: Zimmer, Detmar, et al. Reibscheibe Für Eine Reibungskupplung. 2022.
short: D. Zimmer, L.M. Blumenthal, M. Schadomsky, (2022).
date_created: 2022-03-31T08:24:39Z
date_updated: 2022-03-31T09:08:58Z
department:
- _id: '146'
ipc: F16D 13/64
ipn: ' DE 10 2020 125 522 A1'
page: '14'
publication_date: 2022-03-30
status: public
title: Reibscheibe für eine Reibungskupplung
type: patent
user_id: '11904'
year: '2022'
...
---
_id: '30894'
article_number: '109185'
author:
- first_name: Firat
full_name: Tuzgel, Firat
last_name: Tuzgel
- first_name: Emine Fulya
full_name: Akbulut Irmak, Emine Fulya
id: '72008'
last_name: Akbulut Irmak
orcid: 0000-0002-1338-810X
- first_name: Erkan
full_name: Guzel, Erkan
last_name: Guzel
- first_name: Atacan
full_name: Yucesoy, Atacan
last_name: Yucesoy
- first_name: Selim
full_name: Sahin, Selim
last_name: Sahin
- first_name: Alper
full_name: Tasdemirci, Alper
last_name: Tasdemirci
- first_name: Mustafa
full_name: Guden, Mustafa
last_name: Guden
citation:
ama: Tuzgel F, Akbulut Irmak EF, Guzel E, et al. Testing and modeling blast loading
of a sandwich structure cored with a bio-inspired (balanus) core. Thin-Walled
Structures. 2022;175. doi:10.1016/j.tws.2022.109185
apa: Tuzgel, F., Akbulut Irmak, E. F., Guzel, E., Yucesoy, A., Sahin, S., Tasdemirci,
A., & Guden, M. (2022). Testing and modeling blast loading of a sandwich structure
cored with a bio-inspired (balanus) core. Thin-Walled Structures, 175,
Article 109185. https://doi.org/10.1016/j.tws.2022.109185
bibtex: '@article{Tuzgel_Akbulut Irmak_Guzel_Yucesoy_Sahin_Tasdemirci_Guden_2022,
title={Testing and modeling blast loading of a sandwich structure cored with a
bio-inspired (balanus) core}, volume={175}, DOI={10.1016/j.tws.2022.109185},
number={109185}, journal={Thin-Walled Structures}, publisher={Elsevier BV}, author={Tuzgel,
Firat and Akbulut Irmak, Emine Fulya and Guzel, Erkan and Yucesoy, Atacan and
Sahin, Selim and Tasdemirci, Alper and Guden, Mustafa}, year={2022} }'
chicago: Tuzgel, Firat, Emine Fulya Akbulut Irmak, Erkan Guzel, Atacan Yucesoy,
Selim Sahin, Alper Tasdemirci, and Mustafa Guden. “Testing and Modeling Blast
Loading of a Sandwich Structure Cored with a Bio-Inspired (Balanus) Core.” Thin-Walled
Structures 175 (2022). https://doi.org/10.1016/j.tws.2022.109185.
ieee: 'F. Tuzgel et al., “Testing and modeling blast loading of a sandwich
structure cored with a bio-inspired (balanus) core,” Thin-Walled Structures,
vol. 175, Art. no. 109185, 2022, doi: 10.1016/j.tws.2022.109185.'
mla: Tuzgel, Firat, et al. “Testing and Modeling Blast Loading of a Sandwich Structure
Cored with a Bio-Inspired (Balanus) Core.” Thin-Walled Structures, vol.
175, 109185, Elsevier BV, 2022, doi:10.1016/j.tws.2022.109185.
short: F. Tuzgel, E.F. Akbulut Irmak, E. Guzel, A. Yucesoy, S. Sahin, A. Tasdemirci,
M. Guden, Thin-Walled Structures 175 (2022).
date_created: 2022-04-13T11:19:13Z
date_updated: 2022-04-13T11:20:41Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.tws.2022.109185
extern: '1'
intvolume: ' 175'
keyword:
- Mechanical Engineering
- Building and Construction
- Civil and Structural Engineering
language:
- iso: eng
publication: Thin-Walled Structures
publication_identifier:
issn:
- 0263-8231
publication_status: published
publisher: Elsevier BV
status: public
title: Testing and modeling blast loading of a sandwich structure cored with a bio-inspired
(balanus) core
type: journal_article
user_id: '72008'
volume: 175
year: '2022'
...
---
_id: '30903'
abstract:
- lang: ger
text: Federkraftbremsen sind weit verbreitete Komponenten der Antriebstechnik, ansteigend
mit abnehmender Größe erreichen sie aktuell Drehzahlen von bis zu 5 000 min−1.
Es besteht ein Trend zu schnell laufenden Antrieben, mit Drehzahlen von 10 000
min−1 und darüber. Bisher sind wenig Kenntnisse über das Verhalten des Reibwerts
und -moments herkömmlicher Federkraftbremsen mit kostengünstigen organischen Reibbelägen
bei diesen Einsatzbedingungen bekannt. Daher wurde ein Prüfstand entwickelt, der
die Untersuchung bei Gleitgeschwindigkeiten von bis zu 50 m/s bei verschiedenen
Lastträgheiten ermöglicht. Die Versuche zeigten, dass bei begrenzten Reibarbeiten
die herkömmliche Federkraftbremse durchaus das Nennbremsmoment bei höheren Gleitgeschwindigkeiten
erreicht.
article_type: original
author:
- first_name: Magnus
full_name: Schadomsky, Magnus
id: '11904'
last_name: Schadomsky
- first_name: Detmar
full_name: Zimmer, Detmar
id: '604'
last_name: Zimmer
citation:
ama: Schadomsky M, Zimmer D. Betrieb von Federkraftbremsen bei hohen Gleitgeschwindigkeiten.
Konstruktion. 2022;(04):58-64. doi:https://doi.org/10.37544/0720-5953-2022-04-58
apa: Schadomsky, M., & Zimmer, D. (2022). Betrieb von Federkraftbremsen bei
hohen Gleitgeschwindigkeiten. Konstruktion, 04, 58–64. https://doi.org/10.37544/0720-5953-2022-04-58
bibtex: '@article{Schadomsky_Zimmer_2022, title={Betrieb von Federkraftbremsen bei
hohen Gleitgeschwindigkeiten}, DOI={https://doi.org/10.37544/0720-5953-2022-04-58},
number={04}, journal={Konstruktion}, publisher={VDI Fachmedien}, author={Schadomsky,
Magnus and Zimmer, Detmar}, year={2022}, pages={58–64} }'
chicago: 'Schadomsky, Magnus, and Detmar Zimmer. “Betrieb von Federkraftbremsen
bei hohen Gleitgeschwindigkeiten.” Konstruktion, no. 04 (2022): 58–64.
https://doi.org/10.37544/0720-5953-2022-04-58.'
ieee: 'M. Schadomsky and D. Zimmer, “Betrieb von Federkraftbremsen bei hohen Gleitgeschwindigkeiten,”
Konstruktion, no. 04, pp. 58–64, 2022, doi: https://doi.org/10.37544/0720-5953-2022-04-58.'
mla: Schadomsky, Magnus, and Detmar Zimmer. “Betrieb von Federkraftbremsen bei hohen
Gleitgeschwindigkeiten.” Konstruktion, no. 04, VDI Fachmedien, 2022, pp.
58–64, doi:https://doi.org/10.37544/0720-5953-2022-04-58.
short: M. Schadomsky, D. Zimmer, Konstruktion (2022) 58–64.
date_created: 2022-04-14T07:16:18Z
date_updated: 2022-04-14T07:18:16Z
department:
- _id: '146'
doi: https://doi.org/10.37544/0720-5953-2022-04-58
issue: '04'
keyword:
- Federkraftbremse
- Gleitgeschwindigkeit
language:
- iso: ger
main_file_link:
- url: https://elibrary.vdi-verlag.de/10.37544/0720-5953-2022-04-58/betrieb-von-federkraftbremsen-bei-hohen-gleitgeschwindigkeiten-operation-of-spring-loaded-brakes-at-high-sliding-speeds-jahrgang-74-2022-heft-04?page=1
page: 58-64
publication: Konstruktion
publication_identifier:
issn:
- 0720-5953
publication_status: published
publisher: VDI Fachmedien
quality_controlled: '1'
status: public
title: Betrieb von Federkraftbremsen bei hohen Gleitgeschwindigkeiten
type: journal_article
user_id: '11904'
year: '2022'
...
---
_id: '29947'
author:
- first_name: Christoph Wilhelm Theodor
full_name: Schall, Christoph Wilhelm Theodor
id: '44224'
last_name: Schall
- first_name: Volker
full_name: Schöppner, Volker
id: '20530'
last_name: Schöppner
citation:
ama: Schall CWT, Schöppner V. Measurement of material degradation in dependence
of shear rate, temperature, and residence time. Polymer Engineering and Science.
2022;62(3):815-823. doi:10.1002/pen.25887
apa: Schall, C. W. T., & Schöppner, V. (2022). Measurement of material degradation
in dependence of shear rate, temperature, and residence time. Polymer Engineering
and Science, 62(3), 815–823. https://doi.org/10.1002/pen.25887
bibtex: '@article{Schall_Schöppner_2022, title={Measurement of material degradation
in dependence of shear rate, temperature, and residence time}, volume={62}, DOI={10.1002/pen.25887}, number={3}, journal={Polymer
Engineering and Science}, author={Schall, Christoph Wilhelm Theodor and Schöppner,
Volker}, year={2022}, pages={815–823} }'
chicago: 'Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Measurement
of Material Degradation in Dependence of Shear Rate, Temperature, and Residence
Time.” Polymer Engineering and Science 62, no. 3 (2022): 815–23. https://doi.org/10.1002/pen.25887.'
ieee: 'C. W. T. Schall and V. Schöppner, “Measurement of material degradation in
dependence of shear rate, temperature, and residence time,” Polymer Engineering
and Science, vol. 62, no. 3, pp. 815–823, 2022, doi: 10.1002/pen.25887.'
mla: Schall, Christoph Wilhelm Theodor, and Volker Schöppner. “Measurement of Material
Degradation in Dependence of Shear Rate, Temperature, and Residence Time.” Polymer
Engineering and Science, vol. 62, no. 3, 2022, pp. 815–23, doi:10.1002/pen.25887.
short: C.W.T. Schall, V. Schöppner, Polymer Engineering and Science 62 (2022) 815–823.
date_created: 2022-02-22T08:09:47Z
date_updated: 2022-04-20T10:13:34Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
doi: 10.1002/pen.25887
intvolume: ' 62'
issue: '3'
keyword:
- Computing Resources Provided by the Paderborn Center for Parallel Computing
language:
- iso: eng
page: 815-823
publication: Polymer Engineering and Science
publication_status: published
quality_controlled: '1'
status: public
title: Measurement of material degradation in dependence of shear rate, temperature,
and residence time
type: journal_article
user_id: '44224'
volume: 62
year: '2022'
...
---
_id: '27186'
abstract:
- lang: eng
text: 'The presented paper aims to characterize the damage and fracture behavior
of HX340LAD Micro-Alloyed steels using small punch test. Variations with respect
to punch geometries and cutting clearance are made to describe the damage behavior
of the material under different loading conditions. Experimental investigations
are conducted to identify the crack initiation in the specimens. Furthermore,
the numerical FEM simulations are performed to identify the stress state at crack
initiation. It is shown that different stress states from shear to biaxial tension
can be achieved by changing the geometries of punch and varying the cutting clearance.
Moreover, it is presented how changing the configurations can influence the stress
state variables: Triaxiality and lode angle parameter.'
article_type: original
author:
- first_name: Mortaza
full_name: Otroshi, Mortaza
id: '71269'
last_name: Otroshi
orcid: 0000-0002-8652-9209
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Otroshi M, Meschut G. Influence of cutting clearance and punch geometry on
the stress state in small punch test . Engineering Failure Analysis. 2022;136(c).
doi:10.1016/j.engfailanal.2022.106183
apa: Otroshi, M., & Meschut, G. (2022). Influence of cutting clearance and punch
geometry on the stress state in small punch test . Engineering Failure Analysis,
136(c). https://doi.org/10.1016/j.engfailanal.2022.106183
bibtex: '@article{Otroshi_Meschut_2022, title={Influence of cutting clearance and
punch geometry on the stress state in small punch test }, volume={136}, DOI={10.1016/j.engfailanal.2022.106183},
number={c}, journal={Engineering Failure Analysis}, publisher={Elsevier}, author={Otroshi,
Mortaza and Meschut, Gerson}, year={2022} }'
chicago: Otroshi, Mortaza, and Gerson Meschut. “Influence of Cutting Clearance and
Punch Geometry on the Stress State in Small Punch Test .” Engineering Failure
Analysis 136, no. c (2022). https://doi.org/10.1016/j.engfailanal.2022.106183.
ieee: 'M. Otroshi and G. Meschut, “Influence of cutting clearance and punch geometry
on the stress state in small punch test ,” Engineering Failure Analysis,
vol. 136, no. c, 2022, doi: 10.1016/j.engfailanal.2022.106183.'
mla: Otroshi, Mortaza, and Gerson Meschut. “Influence of Cutting Clearance and Punch
Geometry on the Stress State in Small Punch Test .” Engineering Failure Analysis,
vol. 136, no. c, Elsevier, 2022, doi:10.1016/j.engfailanal.2022.106183.
short: M. Otroshi, G. Meschut, Engineering Failure Analysis 136 (2022).
date_created: 2021-11-07T20:34:51Z
date_updated: 2022-04-25T07:48:20Z
department:
- _id: '157'
doi: 10.1016/j.engfailanal.2022.106183
intvolume: ' 136'
issue: c
keyword:
- Ductile damage
- stress state
- small punch test
- triaxiality
- lode angle parameter
language:
- iso: eng
publication: Engineering Failure Analysis
publication_identifier:
issn:
- 1350-6307
publication_status: published
publisher: Elsevier
quality_controlled: '1'
status: public
title: 'Influence of cutting clearance and punch geometry on the stress state in small
punch test '
type: journal_article
user_id: '71269'
volume: 136
year: '2022'
...
---
_id: '30004'
author:
- first_name: Nick
full_name: Chudalla, Nick
id: '41235'
last_name: Chudalla
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Miriam
full_name: Schneider, Miriam
last_name: Schneider
- first_name: Dominik
full_name: Smart, Dominik
last_name: Smart
citation:
ama: 'Chudalla N, Teutenberg D, Meschut G, Schneider M, Smart D. Systematisierung
einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen
. In: 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik. ; 2022.'
apa: 'Chudalla, N., Teutenberg, D., Meschut, G., Schneider, M., & Smart, D.
(2022). Systematisierung einer rechnergestützten Auswertemethode zur Versagensanalyse
geklebter Verbindungen . 22. Kolloquium: Gemeinsame Forschung in Der Klebtechnik.
22. Kolloquium: Gemeinsame Forschung in der Klebtechnik .'
bibtex: '@inproceedings{Chudalla_Teutenberg_Meschut_Schneider_Smart_2022, title={Systematisierung
einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen
}, booktitle={22. Kolloquium: Gemeinsame Forschung in der Klebtechnik}, author={Chudalla,
Nick and Teutenberg, Dominik and Meschut, Gerson and Schneider, Miriam and Smart,
Dominik}, year={2022} }'
chicago: 'Chudalla, Nick, Dominik Teutenberg, Gerson Meschut, Miriam Schneider,
and Dominik Smart. “Systematisierung Einer Rechnergestützten Auswertemethode Zur
Versagensanalyse Geklebter Verbindungen .” In 22. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik, 2022.'
ieee: 'N. Chudalla, D. Teutenberg, G. Meschut, M. Schneider, and D. Smart, “Systematisierung
einer rechnergestützten Auswertemethode zur Versagensanalyse geklebter Verbindungen
,” presented at the 22. Kolloquium: Gemeinsame Forschung in der Klebtechnik ,
2022.'
mla: 'Chudalla, Nick, et al. “Systematisierung Einer Rechnergestützten Auswertemethode
Zur Versagensanalyse Geklebter Verbindungen .” 22. Kolloquium: Gemeinsame Forschung
in Der Klebtechnik, 2022.'
short: 'N. Chudalla, D. Teutenberg, G. Meschut, M. Schneider, D. Smart, in: 22.
Kolloquium: Gemeinsame Forschung in Der Klebtechnik, 2022.'
conference:
end_date: 2022-02-16
name: '22. Kolloquium: Gemeinsame Forschung in der Klebtechnik '
start_date: 2022-02-15
date_created: 2022-02-23T15:38:23Z
date_updated: 2022-04-25T11:23:42Z
department:
- _id: '157'
language:
- iso: eng
publication: '22. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: 'Systematisierung einer rechnergestützten Auswertemethode zur Versagensanalyse
geklebter Verbindungen '
type: conference
user_id: '41235'
year: '2022'
...
---
_id: '30911'
article_number: '115583'
author:
- first_name: Julian
full_name: Vorderbrüggen, Julian
id: '36235'
last_name: Vorderbrüggen
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: Bernd
full_name: Grüber, Bernd
last_name: Grüber
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Vorderbrüggen J, Köhler D, Grüber B, Troschitz J, Gude M, Meschut G. Development
of a rivet geometry for solid self-piercing riveting of thermally loaded CFRP-metal
joints in automotive construction. Composite Structures. 2022;291. doi:10.1016/j.compstruct.2022.115583
apa: Vorderbrüggen, J., Köhler, D., Grüber, B., Troschitz, J., Gude, M., & Meschut,
G. (2022). Development of a rivet geometry for solid self-piercing riveting of
thermally loaded CFRP-metal joints in automotive construction. Composite Structures,
291, Article 115583. https://doi.org/10.1016/j.compstruct.2022.115583
bibtex: '@article{Vorderbrüggen_Köhler_Grüber_Troschitz_Gude_Meschut_2022, title={Development
of a rivet geometry for solid self-piercing riveting of thermally loaded CFRP-metal
joints in automotive construction}, volume={291}, DOI={10.1016/j.compstruct.2022.115583},
number={115583}, journal={Composite Structures}, publisher={Elsevier BV}, author={Vorderbrüggen,
Julian and Köhler, Daniel and Grüber, Bernd and Troschitz, Juliane and Gude, Maik
and Meschut, Gerson}, year={2022} }'
chicago: Vorderbrüggen, Julian, Daniel Köhler, Bernd Grüber, Juliane Troschitz,
Maik Gude, and Gerson Meschut. “Development of a Rivet Geometry for Solid Self-Piercing
Riveting of Thermally Loaded CFRP-Metal Joints in Automotive Construction.” Composite
Structures 291 (2022). https://doi.org/10.1016/j.compstruct.2022.115583.
ieee: 'J. Vorderbrüggen, D. Köhler, B. Grüber, J. Troschitz, M. Gude, and G. Meschut,
“Development of a rivet geometry for solid self-piercing riveting of thermally
loaded CFRP-metal joints in automotive construction,” Composite Structures,
vol. 291, Art. no. 115583, 2022, doi: 10.1016/j.compstruct.2022.115583.'
mla: Vorderbrüggen, Julian, et al. “Development of a Rivet Geometry for Solid Self-Piercing
Riveting of Thermally Loaded CFRP-Metal Joints in Automotive Construction.” Composite
Structures, vol. 291, 115583, Elsevier BV, 2022, doi:10.1016/j.compstruct.2022.115583.
short: J. Vorderbrüggen, D. Köhler, B. Grüber, J. Troschitz, M. Gude, G. Meschut,
Composite Structures 291 (2022).
date_created: 2022-04-19T05:59:56Z
date_updated: 2022-04-25T14:45:29Z
department:
- _id: '157'
doi: 10.1016/j.compstruct.2022.115583
intvolume: ' 291'
keyword:
- Civil and Structural Engineering
- Ceramics and Composites
language:
- iso: eng
publication: Composite Structures
publication_identifier:
issn:
- 0263-8223
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Development of a rivet geometry for solid self-piercing riveting of thermally
loaded CFRP-metal joints in automotive construction
type: journal_article
user_id: '36235'
volume: 291
year: '2022'
...
---
_id: '30904'
abstract:
- lang: eng
text: The process chain for the manufacturing of sheet metal components in mass
production includes various cutting and forming operations, which influence the
resulting properties of the parts and therefore subsequent manufacturing steps,
such as clamping and joining. It is shown that clamping of the components leads
to superimposed residual stresses and geometry changes. Therefore, the part properties
differ from the initial state of the semifinished products, which has to be considered
in the design of clinched joints. This paper presents an approach for coupled
determination of the properties of semifinished and finished parts during deep
drawing and clamping as well as their effects on the joint quality during clinching.
One method for the effective and efficient determination of the properties of
semifinished products and components during production is using process data from
the preceding manufacturing processes, which is concretely presented in this work.
In addition to the interconnection of the entire production chain, it is necessary
to define relevant process data for each individual manufacturing step and to
correlate the data with the material properties reliably. Therefore, the cross-process
interactions of different steps of the process chain for the manufacturing of
sheet metal components and the effect of process variations on subsequent manufacturing
steps are investigated. Consequently, the boundary conditions for a mechanical
joining process based on data from preceding process steps can be predicted.
article_number: '146442072210775'
article_type: review
author:
- first_name: Per
full_name: Heyser, Per
id: '40450'
last_name: Heyser
- first_name: S
full_name: Wiesenmayer, S
last_name: Wiesenmayer
- first_name: P
full_name: Frey, P
last_name: Frey
- first_name: T
full_name: Nehls, T
last_name: Nehls
- first_name: C
full_name: Scharr, C
last_name: Scharr
- first_name: W
full_name: Flügge, W
last_name: Flügge
- first_name: M
full_name: Merklein, M
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Heyser P, Wiesenmayer S, Frey P, et al. Consideration of the manufacturing
history of sheet metal components for the adaptation of a clinching process. Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications. Published online 2022. doi:10.1177/14644207221077560'
apa: 'Heyser, P., Wiesenmayer, S., Frey, P., Nehls, T., Scharr, C., Flügge, W.,
Merklein, M., & Meschut, G. (2022). Consideration of the manufacturing history
of sheet metal components for the adaptation of a clinching process. Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications, Article 146442072210775. https://doi.org/10.1177/14644207221077560'
bibtex: '@article{Heyser_Wiesenmayer_Frey_Nehls_Scharr_Flügge_Merklein_Meschut_2022,
title={Consideration of the manufacturing history of sheet metal components for
the adaptation of a clinching process}, DOI={10.1177/14644207221077560},
number={146442072210775}, journal={Proceedings of the Institution of Mechanical
Engineers, Part L: Journal of Materials: Design and Applications}, publisher={SAGE
Publications}, author={Heyser, Per and Wiesenmayer, S and Frey, P and Nehls, T
and Scharr, C and Flügge, W and Merklein, M and Meschut, Gerson}, year={2022}
}'
chicago: 'Heyser, Per, S Wiesenmayer, P Frey, T Nehls, C Scharr, W Flügge, M Merklein,
and Gerson Meschut. “Consideration of the Manufacturing History of Sheet Metal
Components for the Adaptation of a Clinching Process.” Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
2022. https://doi.org/10.1177/14644207221077560.'
ieee: 'P. Heyser et al., “Consideration of the manufacturing history of sheet
metal components for the adaptation of a clinching process,” Proceedings of
the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications, Art. no. 146442072210775, 2022, doi: 10.1177/14644207221077560.'
mla: 'Heyser, Per, et al. “Consideration of the Manufacturing History of Sheet Metal
Components for the Adaptation of a Clinching Process.” Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
146442072210775, SAGE Publications, 2022, doi:10.1177/14644207221077560.'
short: 'P. Heyser, S. Wiesenmayer, P. Frey, T. Nehls, C. Scharr, W. Flügge, M. Merklein,
G. Meschut, Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications (2022).'
date_created: 2022-04-14T12:05:59Z
date_updated: 2022-04-25T20:01:18Z
department:
- _id: '157'
doi: 10.1177/14644207221077560
keyword:
- Mechanical Engineering
- General Materials Science
language:
- iso: eng
publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications'
publication_identifier:
issn:
- 1464-4207
- 2041-3076
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Consideration of the manufacturing history of sheet metal components for the
adaptation of a clinching process
type: journal_article
user_id: '40450'
year: '2022'
...
---
_id: '30915'
author:
- first_name: Nick
full_name: Chudalla, Nick
id: '41235'
last_name: Chudalla
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Aurélie
full_name: Bartley, Aurélie
last_name: Bartley
- first_name: Tim Michael
full_name: Wibbeke, Tim Michael
last_name: Wibbeke
citation:
ama: Chudalla N, Meschut G, Bartley A, Wibbeke TM. Bauteilschonendes Entfügen struktureller
Klebverbindungen durch Kälte. adhäsion KLEBEN & DICHTEN. 2022;66(4):34-37.
doi:10.1007/s35145-022-0576-0
apa: Chudalla, N., Meschut, G., Bartley, A., & Wibbeke, T. M. (2022). Bauteilschonendes
Entfügen struktureller Klebverbindungen durch Kälte. adhäsion KLEBEN &
DICHTEN, 66(4), 34–37. https://doi.org/10.1007/s35145-022-0576-0
bibtex: '@article{Chudalla_Meschut_Bartley_Wibbeke_2022, title={Bauteilschonendes
Entfügen struktureller Klebverbindungen durch Kälte}, volume={66}, DOI={10.1007/s35145-022-0576-0},
number={4}, journal={adhäsion KLEBEN & DICHTEN}, publisher={Springer Science
and Business Media LLC}, author={Chudalla, Nick and Meschut, Gerson and Bartley,
Aurélie and Wibbeke, Tim Michael}, year={2022}, pages={34–37} }'
chicago: 'Chudalla, Nick, Gerson Meschut, Aurélie Bartley, and Tim Michael Wibbeke.
“Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte.” adhäsion
KLEBEN & DICHTEN 66, no. 4 (2022): 34–37. https://doi.org/10.1007/s35145-022-0576-0.'
ieee: 'N. Chudalla, G. Meschut, A. Bartley, and T. M. Wibbeke, “Bauteilschonendes
Entfügen struktureller Klebverbindungen durch Kälte,” adhäsion KLEBEN &
DICHTEN, vol. 66, no. 4, pp. 34–37, 2022, doi: 10.1007/s35145-022-0576-0.'
mla: Chudalla, Nick, et al. “Bauteilschonendes Entfügen struktureller Klebverbindungen
durch Kälte.” adhäsion KLEBEN & DICHTEN, vol. 66, no. 4, Springer
Science and Business Media LLC, 2022, pp. 34–37, doi:10.1007/s35145-022-0576-0.
short: N. Chudalla, G. Meschut, A. Bartley, T.M. Wibbeke, adhäsion KLEBEN &
DICHTEN 66 (2022) 34–37.
date_created: 2022-04-19T12:02:58Z
date_updated: 2022-05-03T06:57:23Z
department:
- _id: '157'
doi: 10.1007/s35145-022-0576-0
intvolume: ' 66'
issue: '4'
keyword:
- Polymers and Plastics
- General Chemical Engineering
- General Chemistry
language:
- iso: ger
page: 34-37
publication: adhäsion KLEBEN & DICHTEN
publication_identifier:
issn:
- 1619-1919
- 2192-8681
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Bauteilschonendes Entfügen struktureller Klebverbindungen durch Kälte
type: journal_article
user_id: '41235'
volume: 66
year: '2022'
...
---
_id: '31069'
author:
- first_name: Marc
full_name: Wende, Marc
id: '71302'
last_name: Wende
- first_name: Florian
full_name: Fischer, Florian
last_name: Fischer
- first_name: Eugeny
full_name: Kenig, Eugeny
id: '665'
last_name: Kenig
citation:
ama: 'Wende M, Fischer F, Kenig E. Experimentelle Untersuchung und Modellvalidierung
zur Gravidestillation. In: Jahrestreffen Der ProcessNet Fachgruppen Fluidverfahrenstechnik
Und Hochdruckverfahrenstechnik. Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik
und Hochdruckverfahrenstechnik. ; 2022.'
apa: Wende, M., Fischer, F., & Kenig, E. (2022). Experimentelle Untersuchung
und Modellvalidierung zur Gravidestillation. Jahrestreffen Der ProcessNet Fachgruppen
Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik. Jahrestreffen der ProcessNet
Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik, Frankfurt am
Main.
bibtex: '@inproceedings{Wende_Fischer_Kenig_2022, place={Frankfurt am Main}, series={Jahrestreffen
der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik},
title={Experimentelle Untersuchung und Modellvalidierung zur Gravidestillation},
booktitle={Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und
Hochdruckverfahrenstechnik}, author={Wende, Marc and Fischer, Florian and Kenig,
Eugeny}, year={2022}, collection={Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik
und Hochdruckverfahrenstechnik} }'
chicago: Wende, Marc, Florian Fischer, and Eugeny Kenig. “Experimentelle Untersuchung
Und Modellvalidierung Zur Gravidestillation.” In Jahrestreffen Der ProcessNet
Fachgruppen Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik. Jahrestreffen
Der ProcessNet Fachgruppen Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik.
Frankfurt am Main, 2022.
ieee: M. Wende, F. Fischer, and E. Kenig, “Experimentelle Untersuchung und Modellvalidierung
zur Gravidestillation,” presented at the Jahrestreffen der ProcessNet Fachgruppen
Fluidverfahrenstechnik und Hochdruckverfahrenstechnik, Frankfurt am Main, 2022.
mla: Wende, Marc, et al. “Experimentelle Untersuchung Und Modellvalidierung Zur
Gravidestillation.” Jahrestreffen Der ProcessNet Fachgruppen Fluidverfahrenstechnik
Und Hochdruckverfahrenstechnik, 2022.
short: 'M. Wende, F. Fischer, E. Kenig, in: Jahrestreffen Der ProcessNet Fachgruppen
Fluidverfahrenstechnik Und Hochdruckverfahrenstechnik, Frankfurt am Main, 2022.'
conference:
end_date: 2022-05-03
location: Frankfurt am Main
name: Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik
start_date: 2022-05-02
date_created: 2022-05-05T08:28:22Z
date_updated: 2022-05-05T08:29:35Z
department:
- _id: '9'
- _id: '145'
language:
- iso: eng
place: Frankfurt am Main
publication: Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und Hochdruckverfahrenstechnik
series_title: Jahrestreffen der ProcessNet Fachgruppen Fluidverfahrenstechnik und
Hochdruckverfahrenstechnik
status: public
title: Experimentelle Untersuchung und Modellvalidierung zur Gravidestillation
type: conference
user_id: '71302'
year: '2022'
...
---
_id: '31789'
author:
- first_name: Matthias
full_name: Hopp, Matthias
id: '13142'
last_name: Hopp
- first_name: Lisa
full_name: Tölle, Lisa
id: '82465'
last_name: Tölle
citation:
ama: Hopp M, Tölle L. Influence of process parameters on the formation of inhalable
fiber dust during shredding for mechanical recycling of fiber‐reinforced organo
sheets. Journal of Applied Polymer Science. 2022:1-13.
apa: Hopp, M., & Tölle, L. (2022). Influence of process parameters on the formation
of inhalable fiber dust during shredding for mechanical recycling of fiber‐reinforced
organo sheets. Journal of Applied Polymer Science, 1–13.
bibtex: '@article{Hopp_Tölle_2022, title={Influence of process parameters on the
formation of inhalable fiber dust during shredding for mechanical recycling of
fiber‐reinforced organo sheets}, journal={Journal of Applied Polymer Science},
author={Hopp, Matthias and Tölle, Lisa}, year={2022}, pages={1–13} }'
chicago: Hopp, Matthias, and Lisa Tölle. “Influence of Process Parameters on the
Formation of Inhalable Fiber Dust during Shredding for Mechanical Recycling of
Fiber‐reinforced Organo Sheets.” Journal of Applied Polymer Science, 2022.
ieee: M. Hopp and L. Tölle, “Influence of process parameters on the formation of
inhalable fiber dust during shredding for mechanical recycling of fiber‐reinforced
organo sheets,” Journal of Applied Polymer Science, pp. 1–13, 2022.
mla: Hopp, Matthias, and Lisa Tölle. “Influence of Process Parameters on the Formation
of Inhalable Fiber Dust during Shredding for Mechanical Recycling of Fiber‐reinforced
Organo Sheets.” Journal of Applied Polymer Science, 2022, pp. 1–13.
short: M. Hopp, L. Tölle, Journal of Applied Polymer Science (2022) 1–13.
date_created: 2022-06-07T10:29:33Z
date_updated: 2022-06-07T10:29:36Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 1-13
publication: Journal of Applied Polymer Science
publication_date: '2022'
status: public
title: Influence of process parameters on the formation of inhalable fiber dust during shredding
for mechanical recycling of fiber‐reinforced organo sheets
type: newspaper_article
user_id: '44116'
year: '2022'
...
---
_id: '31788'
author:
- first_name: Matthias
full_name: Hopp, Matthias
id: '13142'
last_name: Hopp
- first_name: Lisa
full_name: Tölle, Lisa
id: '82465'
last_name: Tölle
- first_name: J.
full_name: Bünger, J.
last_name: Bünger
- first_name: G.
full_name: Westphal, G.
last_name: Westphal
- first_name: N.
full_name: Rosenkranz, N.
last_name: Rosenkranz
- first_name: C.
full_name: Monsé, C.
last_name: Monsé
citation:
ama: Hopp M, Tölle L, Bünger J, Westphal G, Rosenkranz N, Monsé C. Fiber Dust Formation
during the Recycling of FRP. Kunststoffe international. 2022:12-15.
apa: Hopp, M., Tölle, L., Bünger, J., Westphal, G., Rosenkranz, N., & Monsé,
C. (2022). Fiber Dust Formation during the Recycling of FRP. Kunststoffe
International, 12–15.
bibtex: '@article{Hopp_Tölle_Bünger_Westphal_Rosenkranz_Monsé_2022, title={Fiber
Dust Formation during the Recycling of FRP}, journal={ Kunststoffe international},
author={Hopp, Matthias and Tölle, Lisa and Bünger, J. and Westphal, G. and Rosenkranz,
N. and Monsé, C.}, year={2022}, pages={12–15} }'
chicago: Hopp, Matthias, Lisa Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and
C. Monsé. “Fiber Dust Formation during the Recycling of FRP.” Kunststoffe
International, 2022.
ieee: M. Hopp, L. Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and C. Monsé, “Fiber
Dust Formation during the Recycling of FRP,” Kunststoffe international,
pp. 12–15, 2022.
mla: Hopp, Matthias, et al. “Fiber Dust Formation during the Recycling of FRP.”
Kunststoffe International, 2022, pp. 12–15.
short: M. Hopp, L. Tölle, J. Bünger, G. Westphal, N. Rosenkranz, C. Monsé, Kunststoffe
International (2022) 12–15.
date_created: 2022-06-07T10:27:54Z
date_updated: 2022-06-07T10:28:07Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 12-15
publication: ' Kunststoffe international'
publication_date: '2022'
status: public
title: Fiber Dust Formation during the Recycling of FRP
type: newspaper_article
user_id: '44116'
year: '2022'
...
---
_id: '31787'
author:
- first_name: Matthias
full_name: Hopp, Matthias
id: '13142'
last_name: Hopp
- first_name: Lisa
full_name: Tölle, Lisa
id: '82465'
last_name: Tölle
- first_name: J.
full_name: Bünger, J.
last_name: Bünger
- first_name: G.
full_name: Westphal, G.
last_name: Westphal
- first_name: N.
full_name: Rosenkranz, N.
last_name: Rosenkranz
- first_name: C.
full_name: Monsé, C.
last_name: Monsé
citation:
ama: Hopp M, Tölle L, Bünger J, Westphal G, Rosenkranz N, Monsé C. Faserstäube beim
FVK-Recycling. Kunststoffe. 2022:52-55.
apa: Hopp, M., Tölle, L., Bünger, J., Westphal, G., Rosenkranz, N., & Monsé,
C. (2022). Faserstäube beim FVK-Recycling. Kunststoffe, 52–55.
bibtex: '@article{Hopp_Tölle_Bünger_Westphal_Rosenkranz_Monsé_2022, title={Faserstäube
beim FVK-Recycling}, journal={Kunststoffe}, author={Hopp, Matthias and Tölle,
Lisa and Bünger, J. and Westphal, G. and Rosenkranz, N. and Monsé, C.}, year={2022},
pages={52–55} }'
chicago: Hopp, Matthias, Lisa Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and
C. Monsé. “Faserstäube Beim FVK-Recycling.” Kunststoffe, 2022.
ieee: M. Hopp, L. Tölle, J. Bünger, G. Westphal, N. Rosenkranz, and C. Monsé, “Faserstäube
beim FVK-Recycling,” Kunststoffe, pp. 52–55, 2022.
mla: Hopp, Matthias, et al. “Faserstäube Beim FVK-Recycling.” Kunststoffe,
2022, pp. 52–55.
short: M. Hopp, L. Tölle, J. Bünger, G. Westphal, N. Rosenkranz, C. Monsé, Kunststoffe
(2022) 52–55.
date_created: 2022-06-07T10:25:48Z
date_updated: 2022-06-07T10:25:53Z
department:
- _id: '9'
- _id: '367'
- _id: '321'
language:
- iso: eng
page: 52-55
publication: Kunststoffe
publication_date: '2022'
status: public
title: Faserstäube beim FVK-Recycling
type: newspaper_article
user_id: '44116'
year: '2022'
...
---
_id: '32155'
author:
- first_name: Felix
full_name: Beule, Felix
id: '66192'
last_name: Beule
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Tobias
full_name: Aubel, Tobias
last_name: Aubel
- first_name: Anton
full_name: Matzenmiller, Anton
last_name: Matzenmiller
citation:
ama: 'Beule F, Teutenberg D, Meschut G, Aubel T, Matzenmiller A. Influence of curing-induced
pre-deformations on the mechanical properties of adhesively bonded joints in steel-intensive
mixed-material structures. In: Proceedings of the 6th Conference on Steels
in Cars and Trucks. ; 2022.'
apa: Beule, F., Teutenberg, D., Meschut, G., Aubel, T., & Matzenmiller, A. (2022).
Influence of curing-induced pre-deformations on the mechanical properties of adhesively
bonded joints in steel-intensive mixed-material structures. Proceedings of
the 6th Conference on Steels in Cars and Trucks. 6th Conference on Steels
in Cars and Trucks, Milan.
bibtex: '@inproceedings{Beule_Teutenberg_Meschut_Aubel_Matzenmiller_2022, title={Influence
of curing-induced pre-deformations on the mechanical properties of adhesively
bonded joints in steel-intensive mixed-material structures}, booktitle={Proceedings
of the 6th Conference on Steels in Cars and Trucks}, author={Beule, Felix and
Teutenberg, Dominik and Meschut, Gerson and Aubel, Tobias and Matzenmiller, Anton},
year={2022} }'
chicago: Beule, Felix, Dominik Teutenberg, Gerson Meschut, Tobias Aubel, and Anton
Matzenmiller. “Influence of Curing-Induced Pre-Deformations on the Mechanical
Properties of Adhesively Bonded Joints in Steel-Intensive Mixed-Material Structures.”
In Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
ieee: F. Beule, D. Teutenberg, G. Meschut, T. Aubel, and A. Matzenmiller, “Influence
of curing-induced pre-deformations on the mechanical properties of adhesively
bonded joints in steel-intensive mixed-material structures,” presented at the
6th Conference on Steels in Cars and Trucks, Milan, 2022.
mla: Beule, Felix, et al. “Influence of Curing-Induced Pre-Deformations on the Mechanical
Properties of Adhesively Bonded Joints in Steel-Intensive Mixed-Material Structures.”
Proceedings of the 6th Conference on Steels in Cars and Trucks, 2022.
short: 'F. Beule, D. Teutenberg, G. Meschut, T. Aubel, A. Matzenmiller, in: Proceedings
of the 6th Conference on Steels in Cars and Trucks, 2022.'
conference:
end_date: 2022-06-23
location: Milan
name: 6th Conference on Steels in Cars and Trucks
start_date: 2022-06-20
date_created: 2022-06-24T10:46:25Z
date_updated: 2022-06-24T10:46:37Z
department:
- _id: '157'
language:
- iso: eng
publication: Proceedings of the 6th Conference on Steels in Cars and Trucks
status: public
title: Influence of curing-induced pre-deformations on the mechanical properties of
adhesively bonded joints in steel-intensive mixed-material structures
type: conference_abstract
user_id: '66192'
year: '2022'
...
---
_id: '32263'
abstract:
- lang: eng
text: Furfuryl amine-functionalized few-layered graphene was prepared via
a mechanochemical process by a [4 + 2] cycloaddition under solvent-free conditions.
author:
- first_name: Najmeh
full_name: Filvan Torkaman, Najmeh
id: '77435'
last_name: Filvan Torkaman
- first_name: Marina
full_name: Kley, Marina
last_name: Kley
- first_name: Wolfgang
full_name: Bremser, Wolfgang
last_name: Bremser
- first_name: René
full_name: Wilhelm, René
last_name: Wilhelm
citation:
ama: Filvan Torkaman N, Kley M, Bremser W, Wilhelm R. Reversible functionalization
and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine. RSC
Advances. 2022;12(27):17249-17256. doi:10.1039/d2ra02566c
apa: Filvan Torkaman, N., Kley, M., Bremser, W., & Wilhelm, R. (2022). Reversible
functionalization and exfoliation of graphite by a Diels–Alder reaction with furfuryl
amine. RSC Advances, 12(27), 17249–17256. https://doi.org/10.1039/d2ra02566c
bibtex: '@article{Filvan Torkaman_Kley_Bremser_Wilhelm_2022, title={Reversible functionalization
and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine}, volume={12},
DOI={10.1039/d2ra02566c}, number={27},
journal={RSC Advances}, publisher={Royal Society of Chemistry (RSC)}, author={Filvan
Torkaman, Najmeh and Kley, Marina and Bremser, Wolfgang and Wilhelm, René}, year={2022},
pages={17249–17256} }'
chicago: 'Filvan Torkaman, Najmeh, Marina Kley, Wolfgang Bremser, and René Wilhelm.
“Reversible Functionalization and Exfoliation of Graphite by a Diels–Alder Reaction
with Furfuryl Amine.” RSC Advances 12, no. 27 (2022): 17249–56. https://doi.org/10.1039/d2ra02566c.'
ieee: 'N. Filvan Torkaman, M. Kley, W. Bremser, and R. Wilhelm, “Reversible functionalization
and exfoliation of graphite by a Diels–Alder reaction with furfuryl amine,” RSC
Advances, vol. 12, no. 27, pp. 17249–17256, 2022, doi: 10.1039/d2ra02566c.'
mla: Filvan Torkaman, Najmeh, et al. “Reversible Functionalization and Exfoliation
of Graphite by a Diels–Alder Reaction with Furfuryl Amine.” RSC Advances,
vol. 12, no. 27, Royal Society of Chemistry (RSC), 2022, pp. 17249–56, doi:10.1039/d2ra02566c.
short: N. Filvan Torkaman, M. Kley, W. Bremser, R. Wilhelm, RSC Advances 12 (2022)
17249–17256.
date_created: 2022-06-28T11:49:14Z
date_updated: 2022-06-28T12:13:10Z
department:
- _id: '35'
- _id: '321'
- _id: '603'
doi: 10.1039/d2ra02566c
intvolume: ' 12'
issue: '27'
keyword:
- General Chemical Engineering
- General Chemistry
language:
- iso: eng
page: 17249-17256
publication: RSC Advances
publication_identifier:
issn:
- 2046-2069
publication_status: published
publisher: Royal Society of Chemistry (RSC)
status: public
title: Reversible functionalization and exfoliation of graphite by a Diels–Alder reaction
with furfuryl amine
type: journal_article
user_id: '77435'
volume: 12
year: '2022'
...
---
_id: '32279'
author:
- first_name: Tobias
full_name: Schmolke, Tobias
id: '44759'
last_name: Schmolke
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Schmolke T, Meschut G. Investigation of leak tightness for bonded steel joints
induced by mechanical and corrosive load for use in battery housings. In: Proceedings
of the 6th Conference on Steels in Cars and Trucks. ; 2022.'
apa: Schmolke, T., & Meschut, G. (2022). Investigation of leak tightness for
bonded steel joints induced by mechanical and corrosive load for use in battery
housings. Proceedings of the 6th Conference on Steels in Cars and Trucks.
6th International Conference on Steels in Cars and Trucks, Milan.
bibtex: '@inproceedings{Schmolke_Meschut_2022, title={Investigation of leak tightness
for bonded steel joints induced by mechanical and corrosive load for use in battery
housings}, booktitle={Proceedings of the 6th Conference on Steels in Cars and
Trucks}, author={Schmolke, Tobias and Meschut, Gerson}, year={2022} }'
chicago: Schmolke, Tobias, and Gerson Meschut. “Investigation of Leak Tightness
for Bonded Steel Joints Induced by Mechanical and Corrosive Load for Use in Battery
Housings.” In Proceedings of the 6th Conference on Steels in Cars and Trucks,
2022.
ieee: T. Schmolke and G. Meschut, “Investigation of leak tightness for bonded steel
joints induced by mechanical and corrosive load for use in battery housings,”
presented at the 6th International Conference on Steels in Cars and Trucks, Milan,
2022.
mla: Schmolke, Tobias, and Gerson Meschut. “Investigation of Leak Tightness for
Bonded Steel Joints Induced by Mechanical and Corrosive Load for Use in Battery
Housings.” Proceedings of the 6th Conference on Steels in Cars and Trucks,
2022.
short: 'T. Schmolke, G. Meschut, in: Proceedings of the 6th Conference on Steels
in Cars and Trucks, 2022.'
conference:
end_date: 2022-06-23
location: Milan
name: 6th International Conference on Steels in Cars and Trucks
start_date: 2022-06-20
date_created: 2022-06-29T11:04:42Z
date_updated: 2022-06-29T11:05:28Z
department:
- _id: '157'
language:
- iso: eng
publication: Proceedings of the 6th Conference on Steels in Cars and Trucks
status: public
title: Investigation of leak tightness for bonded steel joints induced by mechanical
and corrosive load for use in battery housings
type: conference_abstract
user_id: '44759'
year: '2022'
...
---
_id: '32330'
author:
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
last_name: Krüger
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
last_name: Hoyer
- first_name: Florian
full_name: Hengsbach, Florian
last_name: Hengsbach
- first_name: Mirko
full_name: Schaper, Mirko
last_name: Schaper
citation:
ama: Krüger JT, Hoyer K-P, Hengsbach F, Schaper M. Formation of insoluble silver-phases
in an iron-manganese matrix for bioresorbable implants using varying laser beam
melting strategies. Journal of Materials Research and Technology. 2022;19:2369-2387.
doi:10.1016/j.jmrt.2022.06.006
apa: Krüger, J. T., Hoyer, K.-P., Hengsbach, F., & Schaper, M. (2022). Formation
of insoluble silver-phases in an iron-manganese matrix for bioresorbable implants
using varying laser beam melting strategies. Journal of Materials Research
and Technology, 19, 2369–2387. https://doi.org/10.1016/j.jmrt.2022.06.006
bibtex: '@article{Krüger_Hoyer_Hengsbach_Schaper_2022, title={Formation of insoluble
silver-phases in an iron-manganese matrix for bioresorbable implants using varying
laser beam melting strategies}, volume={19}, DOI={10.1016/j.jmrt.2022.06.006},
journal={Journal of Materials Research and Technology}, publisher={Elsevier BV},
author={Krüger, Jan Tobias and Hoyer, Kay-Peter and Hengsbach, Florian and Schaper,
Mirko}, year={2022}, pages={2369–2387} }'
chicago: 'Krüger, Jan Tobias, Kay-Peter Hoyer, Florian Hengsbach, and Mirko Schaper.
“Formation of Insoluble Silver-Phases in an Iron-Manganese Matrix for Bioresorbable
Implants Using Varying Laser Beam Melting Strategies.” Journal of Materials
Research and Technology 19 (2022): 2369–87. https://doi.org/10.1016/j.jmrt.2022.06.006.'
ieee: 'J. T. Krüger, K.-P. Hoyer, F. Hengsbach, and M. Schaper, “Formation of insoluble
silver-phases in an iron-manganese matrix for bioresorbable implants using varying
laser beam melting strategies,” Journal of Materials Research and Technology,
vol. 19, pp. 2369–2387, 2022, doi: 10.1016/j.jmrt.2022.06.006.'
mla: Krüger, Jan Tobias, et al. “Formation of Insoluble Silver-Phases in an Iron-Manganese
Matrix for Bioresorbable Implants Using Varying Laser Beam Melting Strategies.”
Journal of Materials Research and Technology, vol. 19, Elsevier BV, 2022,
pp. 2369–87, doi:10.1016/j.jmrt.2022.06.006.
short: J.T. Krüger, K.-P. Hoyer, F. Hengsbach, M. Schaper, Journal of Materials
Research and Technology 19 (2022) 2369–2387.
date_created: 2022-07-07T13:53:44Z
date_updated: 2022-07-07T13:57:20Z
department:
- _id: '9'
- _id: '158'
doi: 10.1016/j.jmrt.2022.06.006
intvolume: ' 19'
keyword:
- Metals and Alloys
- Surfaces
- Coatings and Films
- Biomaterials
- Ceramics and Composites
language:
- iso: eng
page: 2369-2387
publication: Journal of Materials Research and Technology
publication_identifier:
issn:
- 2238-7854
publication_status: published
publisher: Elsevier BV
status: public
title: Formation of insoluble silver-phases in an iron-manganese matrix for bioresorbable
implants using varying laser beam melting strategies
type: journal_article
user_id: '44307'
volume: 19
year: '2022'
...