---
_id: '67019'
abstract:
- lang: eng
text: In order to make rail transportation more attractive compared to motorized
private transport, intelligent solutions are required across the entire mobility
chain. Train stations, as places of connection and transfer, offer the greatest
potential in this context. Thus, the deployment of autonomous service robots at
train stations offers a wide range of possibilities for supporting passengers
on their journeys by rail, for example, by providing information, accompanying
them to the next link in the mobility chain, or transporting their luggage. Since
such robots are battery-powered, one challenge is to carefully plan activities
based on the remaining battery capacity. Therefore, the aim of this work is to
predict battery usage and, in turn, battery state, in order to inform passengers,
and to enable intelligent planning of its usage.In this work, realistic operational
conditions of a service robot are systematically assessed through measurements
on the service robot itself and through passenger surveys at a train station.
The estimated operational conditions are experimentally replicated to simulate
the heterogeneous use of the battery pack, while acquiring condition monitoring
data throughout its use. The battery pack is modeled based on the single particle
model, which can robustly predict the battery state by simulating its usage considering
past operational conditions. The approach is validated using experimental data
obtained from simulating realistic usage. On the one hand, additional battery
packs are employed, and on the other hand, the load is varied. The advantage of
this approach lies in the ability to account for future changes, such as higher
loads than anticipated, to provide robust predictions.This enables the intelligent
use of service robots, offering passengers an improved service experience at train
stations.
author:
- first_name: Alexander
full_name: Löwen, Alexander
id: '47233'
last_name: Löwen
- first_name: Enrique
full_name: Aleman-Gallegos, Enrique
last_name: Aleman-Gallegos
- first_name: Osarenren
full_name: Aimiyekagbon, Osarenren
id: '9557'
last_name: Aimiyekagbon
- first_name: Sven
full_name: Wachsmuth, Sven
last_name: Wachsmuth
- first_name: Walter
full_name: Sextro, Walter
id: '21220'
last_name: Sextro
citation:
ama: 'Löwen A, Aleman-Gallegos E, Aimiyekagbon O, Wachsmuth S, Sextro W. Prediction
and simulation of battery pack usage for intelligent service robot deployment
at a train station. In: PHM Society European Conference. Vol 9. PHM Society;
2026:1-10. doi:10.36001/phme.2026.v9i1.4952'
apa: Löwen, A., Aleman-Gallegos, E., Aimiyekagbon, O., Wachsmuth, S., & Sextro,
W. (2026). Prediction and simulation of battery pack usage for intelligent service
robot deployment at a train station. PHM Society European Conference, 9(1),
1–10. https://doi.org/10.36001/phme.2026.v9i1.4952
bibtex: '@inproceedings{Löwen_Aleman-Gallegos_Aimiyekagbon_Wachsmuth_Sextro_2026,
place={Oslo}, title={Prediction and simulation of battery pack usage for intelligent
service robot deployment at a train station}, volume={9}, DOI={10.36001/phme.2026.v9i1.4952},
number={1}, booktitle={PHM Society European Conference}, publisher={PHM Society},
author={Löwen, Alexander and Aleman-Gallegos, Enrique and Aimiyekagbon, Osarenren
and Wachsmuth, Sven and Sextro, Walter}, year={2026}, pages={1–10} }'
chicago: 'Löwen, Alexander, Enrique Aleman-Gallegos, Osarenren Aimiyekagbon, Sven
Wachsmuth, and Walter Sextro. “Prediction and Simulation of Battery Pack Usage
for Intelligent Service Robot Deployment at a Train Station.” In PHM Society
European Conference, 9:1–10. Oslo: PHM Society, 2026. https://doi.org/10.36001/phme.2026.v9i1.4952.'
ieee: 'A. Löwen, E. Aleman-Gallegos, O. Aimiyekagbon, S. Wachsmuth, and W. Sextro,
“Prediction and simulation of battery pack usage for intelligent service robot
deployment at a train station,” in PHM Society European Conference, Oslo,
2026, vol. 9, no. 1, pp. 1–10, doi: 10.36001/phme.2026.v9i1.4952.'
mla: Löwen, Alexander, et al. “Prediction and Simulation of Battery Pack Usage for
Intelligent Service Robot Deployment at a Train Station.” PHM Society European
Conference, vol. 9, no. 1, PHM Society, 2026, pp. 1–10, doi:10.36001/phme.2026.v9i1.4952.
short: 'A. Löwen, E. Aleman-Gallegos, O. Aimiyekagbon, S. Wachsmuth, W. Sextro,
in: PHM Society European Conference, PHM Society, Oslo, 2026, pp. 1–10.'
conference:
end_date: 2026-07-10
location: Oslo
start_date: 2026-07-08
date_created: 2026-09-07T12:52:16Z
date_updated: 2026-09-07T13:01:58Z
department:
- _id: '151'
doi: 10.36001/phme.2026.v9i1.4952
intvolume: ' 9'
issue: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://papers.phmsociety.org/index.php/phme/article/view/4952
oa: '1'
page: 1-10
place: Oslo
popular_science: '1'
publication: PHM Society European Conference
publication_identifier:
issn:
- 2325-016X
- 2325-016X
publication_status: published
publisher: PHM Society
quality_controlled: '1'
related_material:
link:
- relation: confirmation
url: https://papers.phmsociety.org/index.php/phme/article/view/4952
status: public
title: Prediction and simulation of battery pack usage for intelligent service robot
deployment at a train station
type: conference
user_id: '47233'
volume: 9
year: '2026'
...
---
_id: '58378'
abstract:
- lang: eng
text: "Abstract\r\n The contact between
two partners can be determined using experimental or numerical methods. For the
validation of numerical simulations, appropriate experiments and material models
of the contact partners are required. Paper in combination with carbon paper can
be used in experiments to detect the area of contact between contact partners.
A simplified linear-elastic material model of paper for compression in the thickness
direction was developed. To evaluate the material model, it was applied to an
exemplary wheel-rail contact situation."
author:
- first_name: Ina
full_name: Stratmann, Ina
last_name: Stratmann
- first_name: Kay-Peter
full_name: Hoyer, Kay-Peter
id: '48411'
last_name: Hoyer
- first_name: Christian
full_name: Schindler, Christian
last_name: Schindler
citation:
ama: Stratmann I, Hoyer K-P, Schindler C. Developing a simplified linear-elastic
material model for carbon paper applied in the rough rail-wheel contact. Journal
of Tribology. Published online 2025:1-19. doi:10.1115/1.4067696
apa: Stratmann, I., Hoyer, K.-P., & Schindler, C. (2025). Developing a simplified
linear-elastic material model for carbon paper applied in the rough rail-wheel
contact. Journal of Tribology, 1–19. https://doi.org/10.1115/1.4067696
bibtex: '@article{Stratmann_Hoyer_Schindler_2025, title={Developing a simplified
linear-elastic material model for carbon paper applied in the rough rail-wheel
contact}, DOI={10.1115/1.4067696},
journal={Journal of Tribology}, publisher={ASME International}, author={Stratmann,
Ina and Hoyer, Kay-Peter and Schindler, Christian}, year={2025}, pages={1–19}
}'
chicago: Stratmann, Ina, Kay-Peter Hoyer, and Christian Schindler. “Developing a
Simplified Linear-Elastic Material Model for Carbon Paper Applied in the Rough
Rail-Wheel Contact.” Journal of Tribology, 2025, 1–19. https://doi.org/10.1115/1.4067696.
ieee: 'I. Stratmann, K.-P. Hoyer, and C. Schindler, “Developing a simplified linear-elastic
material model for carbon paper applied in the rough rail-wheel contact,” Journal
of Tribology, pp. 1–19, 2025, doi: 10.1115/1.4067696.'
mla: Stratmann, Ina, et al. “Developing a Simplified Linear-Elastic Material Model
for Carbon Paper Applied in the Rough Rail-Wheel Contact.” Journal of Tribology,
ASME International, 2025, pp. 1–19, doi:10.1115/1.4067696.
short: I. Stratmann, K.-P. Hoyer, C. Schindler, Journal of Tribology (2025) 1–19.
date_created: 2025-01-27T16:24:06Z
date_updated: 2025-01-27T16:25:01Z
department:
- _id: '9'
- _id: '158'
doi: 10.1115/1.4067696
language:
- iso: eng
page: 1-19
publication: Journal of Tribology
publication_identifier:
issn:
- 0742-4787
- 1528-8897
publication_status: published
publisher: ASME International
quality_controlled: '1'
status: public
title: Developing a simplified linear-elastic material model for carbon paper applied
in the rough rail-wheel contact
type: journal_article
user_id: '48411'
year: '2025'
...
---
_id: '58438'
abstract:
- lang: eng
text: This study presents a numerical approach using a 3D finite element model to
quantify the remaining clamp load of a plastic nut joint after a specific time.
The viscoelastic relaxation of a thermoplastic nut, which is predominantly screwed
on a welding stud, is described by a material card using Prony Series. Prony Series
are derived from experimental dynamical mechanical analysis with different moisture
and fiber contents of the thermoplastic. Since plastic nuts usually do not have
preformed threads, the increased temperatures and resulting stresses from the
thread-forming process are considered in the simulation. An FE model is created
and verified by substrate stress relaxation tests. Experimental clamp load measurements
with miniature compression load cells verify the clamp load prediction and show
a good agreement. The developed model is used to analyze the clamp load distribution
within the threads and reveals an almost even distribution within the threads.
author:
- first_name: Jan
full_name: Wippermann, Jan
last_name: Wippermann
- first_name: Gerson
full_name: Meschut, Gerson
last_name: Meschut
citation:
ama: Wippermann J, Meschut G. Numerical modeling of clamp load relaxation of plastic
nuts under varying moisture and fiber contents. Welding in the World. Published
online 2025. doi:10.1007/s40194-025-01928-4
apa: Wippermann, J., & Meschut, G. (2025). Numerical modeling of clamp load
relaxation of plastic nuts under varying moisture and fiber contents. Welding
in the World. https://doi.org/10.1007/s40194-025-01928-4
bibtex: '@article{Wippermann_Meschut_2025, title={Numerical modeling of clamp load
relaxation of plastic nuts under varying moisture and fiber contents}, DOI={10.1007/s40194-025-01928-4},
journal={Welding in the World}, publisher={Springer Science and Business Media
LLC}, author={Wippermann, Jan and Meschut, Gerson}, year={2025} }'
chicago: Wippermann, Jan, and Gerson Meschut. “Numerical Modeling of Clamp Load
Relaxation of Plastic Nuts under Varying Moisture and Fiber Contents.” Welding
in the World, 2025. https://doi.org/10.1007/s40194-025-01928-4.
ieee: 'J. Wippermann and G. Meschut, “Numerical modeling of clamp load relaxation
of plastic nuts under varying moisture and fiber contents,” Welding in the
World, 2025, doi: 10.1007/s40194-025-01928-4.'
mla: Wippermann, Jan, and Gerson Meschut. “Numerical Modeling of Clamp Load Relaxation
of Plastic Nuts under Varying Moisture and Fiber Contents.” Welding in the
World, Springer Science and Business Media LLC, 2025, doi:10.1007/s40194-025-01928-4.
short: J. Wippermann, G. Meschut, Welding in the World (2025).
date_created: 2025-01-30T14:26:50Z
date_updated: 2025-01-30T14:40:06Z
department:
- _id: '157'
doi: 10.1007/s40194-025-01928-4
language:
- iso: eng
publication: Welding in the World
publication_identifier:
issn:
- 0043-2288
- 1878-6669
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Numerical modeling of clamp load relaxation of plastic nuts under varying moisture
and fiber contents
type: journal_article
user_id: '55686'
year: '2025'
...
---
_id: '58444'
author:
- first_name: Jan
full_name: Wippermann, Jan
id: '55686'
last_name: Wippermann
orcid: 0000-0002-5013-853X
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Wippermann J, Meschut G. Entwicklung einer Methode für die Prognose des Anziehdrehmoments
von Kunststoffmutte. JOINING PLASTICS. Published online 2025.
apa: Wippermann, J., & Meschut, G. (2025). Entwicklung einer Methode für die
Prognose des Anziehdrehmoments von Kunststoffmutte. JOINING PLASTICS.
bibtex: '@article{Wippermann_Meschut_2025, title={Entwicklung einer Methode für
die Prognose des Anziehdrehmoments von Kunststoffmutte}, journal={JOINING PLASTICS},
author={Wippermann, Jan and Meschut, Gerson}, year={2025} }'
chicago: Wippermann, Jan, and Gerson Meschut. “Entwicklung einer Methode für die
Prognose des Anziehdrehmoments von Kunststoffmutte.” JOINING PLASTICS,
2025.
ieee: J. Wippermann and G. Meschut, “Entwicklung einer Methode für die Prognose
des Anziehdrehmoments von Kunststoffmutte,” JOINING PLASTICS, 2025.
mla: Wippermann, Jan, and Gerson Meschut. “Entwicklung einer Methode für die Prognose
des Anziehdrehmoments von Kunststoffmutte.” JOINING PLASTICS, 2025.
short: J. Wippermann, G. Meschut, JOINING PLASTICS (2025).
date_created: 2025-01-30T14:36:35Z
date_updated: 2025-01-30T14:38:20Z
department:
- _id: '157'
language:
- iso: ger
publication: JOINING PLASTICS
publication_status: published
quality_controlled: '1'
status: public
title: Entwicklung einer Methode für die Prognose des Anziehdrehmoments von Kunststoffmutte
type: journal_article
user_id: '55686'
year: '2025'
...
---
_id: '58457'
abstract:
- lang: eng
text: Die Transformation der bisher linearen Wirtschaft zu einer Kreislaufwirtschaft
und einer möglichst emissionsneutralen Herstellung und Verwendung von Produkten
bedarf einer ganzheitlichen Forschung und Entwicklung in allen Bereichen der Prozesskette.
Die Fügetechnik gilt dabei als Enabler moderner Hybridstrukturen und ermöglicht
die anforderungsgerechte Verbindung artverschiedener Werkstoffe mit unterschiedlichen
technisch-wirtschaftlichen Eigenschaftsprofilen. Aktuelle Herausforderungen umfassen
das qualitätsgesicherte Fügen bei einer zunehmenden Materialvielfalt aus Primär-
und Sekundärwerkstoffen sowie das gezielte Entfügen von Leichtbaustrukturen in
Instandsetzungs- oder Recyclingprozessen. Ein weiterer Entwicklungsschwerpunkt
liegt auf der menschzentrierten Ausrichtung von Arbeitsprozessen. So können Arbeitskräfte
durch eine ergonomische Produktions- und Fügeprozessplanung sowie die Entwicklung
und Einbindung prozessbegleitender Mixed-Reality-Technologien gezielt entlastet
und dem derzeit zu verzeichnenden Fachkräftemangel effektiv begegnet werden. Das
vorliegende Whitepaper zeigt aktuelle Herausforderungen in der Fügetechnik auf,
fasst relevante Erkenntnisse und Lösungsansätze aus Industrie und Forschung sowie
dem Verbundforschungsvorhaben „Konzepte für die ressourceneffiziente und sichere
Produktion von Leichtbaustrukturen“ (KORESIL) zusammen und leitet geeignete Handlungsempfehlungen
für die Industrie ab. Diese sollen beteiligten Anwendern strategische Ansätze
aufzeigen, um Prozesse ressourceneffizienter und nachhaltiger gestalten zu können.
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julian
full_name: Gilich, Julian
id: '44391'
last_name: Gilich
- first_name: Nick Andre
full_name: Chudalla, Nick Andre
id: '41235'
last_name: Chudalla
citation:
ama: 'Meschut G, Gilich J, Chudalla NA. Ressourceneffiziente Füge- und Entfügetechnologien:
Online-Content zum interaktiven Whitepaper KORESIL. In: Komplexität Beherrschen,
Kreisläufe Schließen : Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ;
Das Interaktive Whitepaper. Technische Universität Dresden; 2025. doi:10.25368/2024.53'
apa: 'Meschut, G., Gilich, J., & Chudalla, N. A. (2025). Ressourceneffiziente
Füge- und Entfügetechnologien: Online-Content zum interaktiven Whitepaper KORESIL.
In Komplexität beherrschen, Kreisläufe schließen : Soziotechnische Systeme
für ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper.
Technische Universität Dresden. https://doi.org/10.25368/2024.53'
bibtex: '@inbook{Meschut_Gilich_Chudalla_2025, title={Ressourceneffiziente Füge-
und Entfügetechnologien: Online-Content zum interaktiven Whitepaper KORESIL},
DOI={10.25368/2024.53}, booktitle={Komplexität
beherrschen, Kreisläufe schließen : Soziotechnische Systeme für ressourceneffiziente
Leichtbaustrukturen ; Das interaktive Whitepaper}, publisher={Technische Universität
Dresden}, author={Meschut, Gerson and Gilich, Julian and Chudalla, Nick Andre},
year={2025} }'
chicago: 'Meschut, Gerson, Julian Gilich, and Nick Andre Chudalla. “Ressourceneffiziente
Füge- Und Entfügetechnologien: Online-Content Zum Interaktiven Whitepaper KORESIL.”
In Komplexität Beherrschen, Kreisläufe Schließen : Soziotechnische Systeme
Für Ressourceneffiziente Leichtbaustrukturen ; Das Interaktive Whitepaper.
Technische Universität Dresden, 2025. https://doi.org/10.25368/2024.53.'
ieee: 'G. Meschut, J. Gilich, and N. A. Chudalla, “Ressourceneffiziente Füge- und
Entfügetechnologien: Online-Content zum interaktiven Whitepaper KORESIL,” in Komplexität
beherrschen, Kreisläufe schließen : Soziotechnische Systeme für ressourceneffiziente
Leichtbaustrukturen ; Das interaktive Whitepaper, Technische Universität Dresden,
2025.'
mla: 'Meschut, Gerson, et al. “Ressourceneffiziente Füge- Und Entfügetechnologien:
Online-Content Zum Interaktiven Whitepaper KORESIL.” Komplexität Beherrschen,
Kreisläufe Schließen : Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ;
Das Interaktive Whitepaper, Technische Universität Dresden, 2025, doi:10.25368/2024.53.'
short: 'G. Meschut, J. Gilich, N.A. Chudalla, in: Komplexität Beherrschen, Kreisläufe
Schließen : Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ;
Das Interaktive Whitepaper, Technische Universität Dresden, 2025.'
date_created: 2025-01-31T12:19:33Z
date_updated: 2025-01-31T12:37:28Z
department:
- _id: '157'
doi: 10.25368/2024.53
language:
- iso: eng
publication: 'Komplexität beherrschen, Kreisläufe schließen : Soziotechnische Systeme
für ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper'
publication_status: published
publisher: Technische Universität Dresden
status: public
title: 'Ressourceneffiziente Füge- und Entfügetechnologien: Online-Content zum interaktiven
Whitepaper KORESIL'
type: book_chapter
user_id: '44391'
year: '2025'
...
---
_id: '58454'
abstract:
- lang: eng
text: Powertrain concepts incorporating renewable energies are an essential element
of the energy revolution and increasingly require efficient manufacturing processes
for electronic systems. Particularly, the joining of structures to be thermally
coupled, such as the battery modules and the thermal management system (TMS),
poses new challenges in process design. Factors that limit the process include
the increased density, viscosity, and abrasiveness of thermal pastes as well as
the pressure sensitivity of battery modules. The research presented aims to systematically
investigate the influences of joining parameters on flow behavior, the formation
of air inclusions, and the occurring joining forces to understand and systematically
optimize the joining process. Employing a test setup following the Closing-Hele-Shaw-Cell,
the influence of specific process parameters on the joining process such as the
joining speed, joining gap, application pattern, and temperature was investigated
for a silicone- and a polyurethane-based thermally conductive paste. The results
indicate a high dependency of both the ensuing joining forces and the flow behavior
on the parameters investigated. These insights imply a potential systematic parameter
optimization and the specific adaptation of the joining process to improve flow
behavior and reduce compressive stresses. This can ensure lower component deformations
and qualify the process for the employment of cell types with a higher power density,
a reduced encapsulation, and lower stiffness while at the same time improving
production rates.
author:
- first_name: Julian
full_name: Gilich, Julian
id: '44391'
last_name: Gilich
- first_name: Dominik
full_name: Teutenberg, Dominik
id: '537'
last_name: Teutenberg
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: B.
full_name: Gröger, B.
last_name: Gröger
- first_name: F.
full_name: Wiebicke, F.
last_name: Wiebicke
- first_name: I.
full_name: Koch, I.
last_name: Koch
- first_name: M.
full_name: Gude, M.
last_name: Gude
citation:
ama: Gilich J, Teutenberg D, Meschut G, et al. Effects of various process parameters
in the joining process on the squeeze flow of highly viscous thermal interface
materials. Welding in the World. Published online 2025. doi:10.1007/s40194-025-01929-3
apa: Gilich, J., Teutenberg, D., Meschut, G., Gröger, B., Wiebicke, F., Koch, I.,
& Gude, M. (2025). Effects of various process parameters in the joining process
on the squeeze flow of highly viscous thermal interface materials. Welding
in the World. https://doi.org/10.1007/s40194-025-01929-3
bibtex: '@article{Gilich_Teutenberg_Meschut_Gröger_Wiebicke_Koch_Gude_2025, title={Effects
of various process parameters in the joining process on the squeeze flow of highly
viscous thermal interface materials}, DOI={10.1007/s40194-025-01929-3},
journal={Welding in the World}, publisher={Springer Science and Business Media
LLC}, author={Gilich, Julian and Teutenberg, Dominik and Meschut, Gerson and Gröger,
B. and Wiebicke, F. and Koch, I. and Gude, M.}, year={2025} }'
chicago: Gilich, Julian, Dominik Teutenberg, Gerson Meschut, B. Gröger, F. Wiebicke,
I. Koch, and M. Gude. “Effects of Various Process Parameters in the Joining Process
on the Squeeze Flow of Highly Viscous Thermal Interface Materials.” Welding
in the World, 2025. https://doi.org/10.1007/s40194-025-01929-3.
ieee: 'J. Gilich et al., “Effects of various process parameters in the joining
process on the squeeze flow of highly viscous thermal interface materials,” Welding
in the World, 2025, doi: 10.1007/s40194-025-01929-3.'
mla: Gilich, Julian, et al. “Effects of Various Process Parameters in the Joining
Process on the Squeeze Flow of Highly Viscous Thermal Interface Materials.” Welding
in the World, Springer Science and Business Media LLC, 2025, doi:10.1007/s40194-025-01929-3.
short: J. Gilich, D. Teutenberg, G. Meschut, B. Gröger, F. Wiebicke, I. Koch, M.
Gude, Welding in the World (2025).
date_created: 2025-01-31T12:07:57Z
date_updated: 2025-01-31T12:22:09Z
department:
- _id: '157'
doi: 10.1007/s40194-025-01929-3
language:
- iso: eng
publication: Welding in the World
publication_identifier:
issn:
- 0043-2288
- 1878-6669
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Effects of various process parameters in the joining process on the squeeze
flow of highly viscous thermal interface materials
type: journal_article
user_id: '44391'
year: '2025'
...
---
_id: '58456'
abstract:
- lang: eng
text: Im Rahmen des BMBF-Forschungsvorhabens KORESIL wurden entlang einer beispielgebenden
Prozesskette für hybride Leichtbaustrukturen notwendige Forschungs- und Entwicklungsschwerpunkte
ermittelt. Insbesondere die Steigerung der Ressourceneffizienz und die Unterstützung
des Menschen im Kontext zukünftiger Arbeitsumfelder standen dabei im Mittelpunkt
der Arbeiten. Hierauf aufbauend konnten Handlungsempfehlungen für Wirtschaft,
Wissenschaft und Politik abgeleitet werden. Das Projekt KORESIL ist eingebettet
in das Projektnetzwerk des Forschungs- und Technologiezentrums für ressourceneffiziente
Leichtbaustrukturen – FOREL. Dieses Zentrum wurde im Jahr 2013 als BMBF-Leuchtturmprojekt
eingerichtet und ist eine offene, unabhängige Plattform zur Entwicklung von Hightech-Leichtbausystemlösungen
in Multi-Material-Design für die Mobilität der Zukunft. Ziel der Plattform ist
die Unterstützung von Entwicklungsprojekten, die Vernetzung der Leichtbauforschung
innerhalb Deutschlands und die Zusammenführung verschiedener Förderinitiativen.
citation:
ama: 'Gude M, Tekkaya E, Zäh MF, Meschut G, Lieberwirth H, eds. Komplexität Beherrschen,
Kreisläufe Schließen: Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ;
Das Interaktive Whitepaper. Technische Universität Dresden; 2025. doi:10.25368/2024.8'
apa: 'Gude, M., Tekkaya, E., Zäh, M. F., Meschut, G., & Lieberwirth, H. (Eds.).
(2025). Komplexität beherrschen, Kreisläufe schließen: Soziotechnische Systeme
für ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper.
Technische Universität Dresden. https://doi.org/10.25368/2024.8'
bibtex: '@book{Gude_Tekkaya_Zäh_Meschut_Lieberwirth_2025, title={Komplexität beherrschen,
Kreisläufe schließen: Soziotechnische Systeme für ressourceneffiziente Leichtbaustrukturen ;
Das interaktive Whitepaper}, DOI={10.25368/2024.8},
publisher={Technische Universität Dresden}, year={2025} }'
chicago: 'Gude, Maik, Erman Tekkaya, Michael F. Zäh, Gerson Meschut, and Holger
Lieberwirth, eds. Komplexität Beherrschen, Kreisläufe Schließen: Soziotechnische
Systeme Für Ressourceneffiziente Leichtbaustrukturen ; Das Interaktive Whitepaper.
Technische Universität Dresden, 2025. https://doi.org/10.25368/2024.8.'
ieee: 'M. Gude, E. Tekkaya, M. F. Zäh, G. Meschut, and H. Lieberwirth, Eds., Komplexität
beherrschen, Kreisläufe schließen: Soziotechnische Systeme für ressourceneffiziente
Leichtbaustrukturen ; Das interaktive Whitepaper. Technische Universität Dresden,
2025.'
mla: 'Gude, Maik, et al., editors. Komplexität Beherrschen, Kreisläufe Schließen:
Soziotechnische Systeme Für Ressourceneffiziente Leichtbaustrukturen ; Das Interaktive
Whitepaper. Technische Universität Dresden, 2025, doi:10.25368/2024.8.'
short: 'M. Gude, E. Tekkaya, M.F. Zäh, G. Meschut, H. Lieberwirth, eds., Komplexität
Beherrschen, Kreisläufe Schließen: Soziotechnische Systeme Für Ressourceneffiziente
Leichtbaustrukturen ; Das Interaktive Whitepaper, Technische Universität Dresden,
2025.'
date_created: 2025-01-31T12:16:31Z
date_updated: 2025-01-31T12:37:17Z
department:
- _id: '157'
doi: 10.25368/2024.8
editor:
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Erman
full_name: Tekkaya, Erman
last_name: Tekkaya
- first_name: Michael F.
full_name: Zäh, Michael F.
last_name: Zäh
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Holger
full_name: Lieberwirth, Holger
last_name: Lieberwirth
language:
- iso: eng
publication_status: published
publisher: Technische Universität Dresden
quality_controlled: '1'
status: public
title: 'Komplexität beherrschen, Kreisläufe schließen: Soziotechnische Systeme für
ressourceneffiziente Leichtbaustrukturen ; Das interaktive Whitepaper'
type: book_editor
user_id: '44391'
year: '2025'
...
---
_id: '58495'
abstract:
- lang: eng
text: To reduce CO2 emissions, the industry, particularly
in the mobility sector, focuses on lightweight vehicles with multi-material structures.
As thermal joining processes are reaching their limits, mechanical techniques
such as self-piercing riveting are being used. One innovative solution is the
versatile self-piercing riveting process (V-SPR), which combines different material
combinations with a multi-range rivet. 1 The joining process
is divided into the piercing process and the forming process of the rivet head
to the respective sheet thickness. The rivet shaft requires sufficient strength
to punch through the punch-sided sheet, and sufficient ductility of the rivet
head is required to form onto the punch-sided sheet. To achieve a combination
of these requirements, local inductive heat treatment strategies are used for
the rivet. To ensure reproducible rivet hardening, a specialised device has been
developed for precise rivet positioning in the induction coil and the subsequent
quenching process. The heat treatment differs in terms of hardening times and
temperatures. In addition, the heat treatment is combined with a subsequent tempering
process. The study aims to determine the resulting hardness distributions and
microstructures of the rivet and to investigate the influence of different heat
treatment strategies on joint formation and load-bearing capacities. The results
show that a graded hardening profile has a positive effect on the spreading behaviour
of the rivet foot and the forming behaviour of the rivet head. Furthermore, the
load-bearing behaviour of the joints is increased.
author:
- first_name: Pia Katharina
full_name: Holtkamp, Pia Katharina
id: '44935'
last_name: Holtkamp
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: Paula
full_name: Probst, Paula
last_name: Probst
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Holtkamp PK, Kappe F, Probst P, Bobbert M, Meschut G. Investigation of local
heat treatment strategies for a multi-range capable rivet and the influence on
joint formation and load-bearing capacity. Proceedings of the Institution of
Mechanical Engineers, Part L: Journal of Materials: Design and Applications.
Published online 2025. doi:10.1177/14644207241307508'
apa: 'Holtkamp, P. K., Kappe, F., Probst, P., Bobbert, M., & Meschut, G. (2025).
Investigation of local heat treatment strategies for a multi-range capable rivet
and the influence on joint formation and load-bearing capacity. Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications. https://doi.org/10.1177/14644207241307508'
bibtex: '@article{Holtkamp_Kappe_Probst_Bobbert_Meschut_2025, title={Investigation
of local heat treatment strategies for a multi-range capable rivet and the influence
on joint formation and load-bearing capacity}, DOI={10.1177/14644207241307508},
journal={Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications}, publisher={SAGE Publications}, author={Holtkamp,
Pia Katharina and Kappe, Fabian and Probst, Paula and Bobbert, Mathias and Meschut,
Gerson}, year={2025} }'
chicago: 'Holtkamp, Pia Katharina, Fabian Kappe, Paula Probst, Mathias Bobbert,
and Gerson Meschut. “Investigation of Local Heat Treatment Strategies for a Multi-Range
Capable Rivet and the Influence on Joint Formation and Load-Bearing Capacity.”
Proceedings of the Institution of Mechanical Engineers, Part L: Journal of
Materials: Design and Applications, 2025. https://doi.org/10.1177/14644207241307508.'
ieee: 'P. K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, and G. Meschut, “Investigation
of local heat treatment strategies for a multi-range capable rivet and the influence
on joint formation and load-bearing capacity,” Proceedings of the Institution
of Mechanical Engineers, Part L: Journal of Materials: Design and Applications,
2025, doi: 10.1177/14644207241307508.'
mla: 'Holtkamp, Pia Katharina, et al. “Investigation of Local Heat Treatment Strategies
for a Multi-Range Capable Rivet and the Influence on Joint Formation and Load-Bearing
Capacity.” Proceedings of the Institution of Mechanical Engineers, Part L:
Journal of Materials: Design and Applications, SAGE Publications, 2025, doi:10.1177/14644207241307508.'
short: 'P.K. Holtkamp, F. Kappe, P. Probst, M. Bobbert, G. Meschut, Proceedings
of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design
and Applications (2025).'
date_created: 2025-02-03T09:26:32Z
date_updated: 2025-02-03T09:36:32Z
department:
- _id: '43'
- _id: '157'
doi: 10.1177/14644207241307508
language:
- iso: eng
project:
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: 'Proceedings of the Institution of Mechanical Engineers, Part L: Journal
of Materials: Design and Applications'
publication_identifier:
issn:
- 1464-4207
- 2041-3076
publication_status: published
publisher: SAGE Publications
quality_controlled: '1'
status: public
title: Investigation of local heat treatment strategies for a multi-range capable
rivet and the influence on joint formation and load-bearing capacity
type: journal_article
user_id: '44935'
year: '2025'
...
---
_id: '57899'
abstract:
- lang: ger
text: "In Haushaltskältegeräten werden in den letzten Jahren immer häufiger Vakuumisolationspaneele
(VIP) eingesetzt. Hiermit ist es unter anderem möglich, dass die Geräte in die
Energieeffizienzklassen A bis C klassifiziert werden können. Ein VIP besteht vereinfacht
aus einer Schutzfolie, die nahezu gasdicht ist und einem Füllmaterial, welches
für die Formstabilität im Vakuum zuständig ist. Aufgrund von technischen Alterungsprozessen
kommt es mit der Zeit zu einem Anstieg des Innendrucks im VIP, wodurch die Wärmeleitfähigkeit
des VIP steigt. Je nach Füllmaterial erfolgt dieser Alterungsprozess unterschiedlich
schnell. Im Extremfall kann so ein neues Haushalts-kältegerät der Energieeffizienzklasse
A nach 1 bis 3 Jahren nur noch als Klasse D bis F eingestuft werden.\r\nInnerhalb
eines Forschungsprojekts wurden Haushaltskältegeräte mit VIP thermografisch untersucht.
Im Rahmen dieser Studienarbeit wurde ein Versuchsaufbau entwickelt, mit dem die
zeitliche Veränderung von Wärmebrücken begutachtet werden kann und so Rückschlüsse
auf den Effizienzverlust der Geräte möglich sind. Der Funkionsnachweises dieses
Versuchsaufbaus wurden an einem Haushaltskältegerät mit künstlich gealterten Vakuumisolationspaneelen
durchgeführt. Diese Arbeiten bieten zukünftig die Möglichkeiten Haushaltskältegeräten
mit VIP bezüglich ihres Degenerationsverhaltens besser zu beurteilen.\r\n"
author:
- first_name: Emily
full_name: Potthast, Emily
last_name: Potthast
- first_name: Andreas
full_name: Elsner, Andreas
id: '16124'
last_name: Elsner
- first_name: Andreas
full_name: Paul, Andreas
id: '7828'
last_name: Paul
- first_name: Tina
full_name: Kasper, Tina
id: '94562'
last_name: Kasper
orcid: '0000-0003-3993-5316 '
citation:
ama: 'Potthast E, Elsner A, Paul A, Kasper T. Thermografische Messungen an Haushaltskältegeräten
mit Vakuumisolationspaneele. In: Deutscher Kälte‐ und Klimatechnischer Verein
e.V., ed. Deutsche Kälte- und Klimatagung 2024 Dresden. Deutscher Kälte‐
und Klimatechnischer Verein e.V.; 2025.'
apa: Potthast, E., Elsner, A., Paul, A., & Kasper, T. (2025). Thermografische
Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele. In Deutscher Kälte‐
und Klimatechnischer Verein e.V. (Ed.), Deutsche Kälte- und Klimatagung 2024
Dresden. Deutscher Kälte‐ und Klimatechnischer Verein e.V.
bibtex: '@inproceedings{Potthast_Elsner_Paul_Kasper_2025, place={Hannover}, title={Thermografische
Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele}, booktitle={Deutsche
Kälte- und Klimatagung 2024 Dresden}, publisher={Deutscher Kälte‐ und Klimatechnischer
Verein e.V.}, author={Potthast, Emily and Elsner, Andreas and Paul, Andreas and
Kasper, Tina}, editor={Deutscher Kälte‐ und Klimatechnischer Verein e.V.}, year={2025}
}'
chicago: 'Potthast, Emily, Andreas Elsner, Andreas Paul, and Tina Kasper. “Thermografische
Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele.” In Deutsche
Kälte- und Klimatagung 2024 Dresden, edited by Deutscher Kälte‐ und Klimatechnischer
Verein e.V. Hannover: Deutscher Kälte‐ und Klimatechnischer Verein e.V., 2025.'
ieee: E. Potthast, A. Elsner, A. Paul, and T. Kasper, “Thermografische Messungen
an Haushaltskältegeräten mit Vakuumisolationspaneele,” in Deutsche Kälte- und
Klimatagung 2024 Dresden, Dresden, 2025.
mla: Potthast, Emily, et al. “Thermografische Messungen an Haushaltskältegeräten
mit Vakuumisolationspaneele.” Deutsche Kälte- und Klimatagung 2024 Dresden,
edited by Deutscher Kälte‐ und Klimatechnischer Verein e.V., Deutscher Kälte‐
und Klimatechnischer Verein e.V., 2025.
short: 'E. Potthast, A. Elsner, A. Paul, T. Kasper, in: Deutscher Kälte‐ und Klimatechnischer
Verein e.V. (Ed.), Deutsche Kälte- und Klimatagung 2024 Dresden, Deutscher Kälte‐
und Klimatechnischer Verein e.V., Hannover, 2025.'
conference:
end_date: 2024-11-22
location: Dresden
name: Deutsche Kälte- und Klimatagung 2024 Dresden
start_date: 2024-11-20
corporate_editor:
- Deutscher Kälte‐ und Klimatechnischer Verein e.V.
date_created: 2025-01-02T11:44:59Z
date_updated: 2025-02-04T06:56:20Z
department:
- _id: '728'
keyword:
- Haushaltskältegeräte
- Energieaufnahme
- Alterung
- Isolierung
- Vakuumisolationspaneele
language:
- iso: ger
place: Hannover
publication: Deutsche Kälte- und Klimatagung 2024 Dresden
publisher: Deutscher Kälte‐ und Klimatechnischer Verein e.V.
status: public
title: Thermografische Messungen an Haushaltskältegeräten mit Vakuumisolationspaneele
type: conference
user_id: '7828'
year: '2025'
...
---
_id: '58510'
abstract:
- lang: eng
text: 'Today’s ultrasonic transducers find broad application in diverse
technology branches and most often cannot be replaced by other actuators. They
are typically based on lead-containing piezoelectric ceramics. These should be
replaced for environmental and health issues by lead-free alternatives. Multiple
material alternatives are already known, but there is a lack of information about
their technological readiness level. To fill this gap, a small series of prestressed
longitudinally vibrating transducers was set up with a standard PZT material and
two lead-free variants within this study. The entire process for building the
transducers is documented: characteristics of individual ring ceramics, burn-in
results, and free vibration and characteristics under load are shown. The main
result is that the investigated lead-free materials are ready to use within ultrasonic
bolted Langevin transducers (BLTs) for medium-power applications, when the geometrical
setup of the transducer is adopted. Since lead-free ceramics need higher voltages
to achieve the same power level, the driving electronics or the mechanical setup
must be altered specifically for each material. Lower self-heating of the lead-free
materials might be attractive for heat-sensitive processes.'
article_number: '55'
article_type: original
author:
- first_name: Claus
full_name: Scheidemann, Claus
id: '38259'
last_name: Scheidemann
- first_name: Peter
full_name: Bornmann, Peter
last_name: Bornmann
- first_name: Walter
full_name: Littmann, Walter
last_name: Littmann
- first_name: Tobias
full_name: Hemsel, Tobias
id: '210'
last_name: Hemsel
citation:
ama: Scheidemann C, Bornmann P, Littmann W, Hemsel T. Lead-Free Ceramics in Prestressed
Ultrasonic Transducers. Actuators. 2025;14(2). doi:10.3390/act14020055
apa: Scheidemann, C., Bornmann, P., Littmann, W., & Hemsel, T. (2025). Lead-Free
Ceramics in Prestressed Ultrasonic Transducers. Actuators, 14(2),
Article 55. https://doi.org/10.3390/act14020055
bibtex: '@article{Scheidemann_Bornmann_Littmann_Hemsel_2025, title={Lead-Free Ceramics
in Prestressed Ultrasonic Transducers}, volume={14}, DOI={10.3390/act14020055},
number={255}, journal={Actuators}, publisher={MDPI AG}, author={Scheidemann, Claus
and Bornmann, Peter and Littmann, Walter and Hemsel, Tobias}, year={2025} }'
chicago: Scheidemann, Claus, Peter Bornmann, Walter Littmann, and Tobias Hemsel.
“Lead-Free Ceramics in Prestressed Ultrasonic Transducers.” Actuators 14,
no. 2 (2025). https://doi.org/10.3390/act14020055.
ieee: 'C. Scheidemann, P. Bornmann, W. Littmann, and T. Hemsel, “Lead-Free Ceramics
in Prestressed Ultrasonic Transducers,” Actuators, vol. 14, no. 2, Art.
no. 55, 2025, doi: 10.3390/act14020055.'
mla: Scheidemann, Claus, et al. “Lead-Free Ceramics in Prestressed Ultrasonic Transducers.”
Actuators, vol. 14, no. 2, 55, MDPI AG, 2025, doi:10.3390/act14020055.
short: C. Scheidemann, P. Bornmann, W. Littmann, T. Hemsel, Actuators 14 (2025).
date_created: 2025-02-04T13:43:23Z
date_updated: 2025-02-04T13:46:41Z
department:
- _id: '151'
doi: 10.3390/act14020055
intvolume: ' 14'
issue: '2'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.mdpi.com/2076-0825/14/2/55
oa: '1'
publication: Actuators
publication_identifier:
issn:
- 2076-0825
publication_status: published
publisher: MDPI AG
quality_controlled: '1'
status: public
title: Lead-Free Ceramics in Prestressed Ultrasonic Transducers
type: journal_article
user_id: '210'
volume: 14
year: '2025'
...
---
_id: '59478'
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Sven
full_name: Rarbach, Sven
id: '67999'
last_name: Rarbach
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: Gräßler I, Rarbach S, Pottebaum J. Data Quality in the Engineering of Circular
Products - Decision support for circular value creation through data ecosystems.
Industry 40 Science. 2025;2025(2). doi:10.30844/i4se.25.2.12
apa: Gräßler, I., Rarbach, S., & Pottebaum, J. (2025). Data Quality in the Engineering
of Circular Products - Decision support for circular value creation through data
ecosystems. Industry 4.0 Science, 2025(2). https://doi.org/10.30844/i4se.25.2.12
bibtex: '@article{Gräßler_Rarbach_Pottebaum_2025, title={Data Quality in the Engineering
of Circular Products - Decision support for circular value creation through data
ecosystems}, volume={2025}, DOI={10.30844/i4se.25.2.12},
number={2}, journal={Industry 4.0 Science}, publisher={GITO mbH Verlag}, author={Gräßler,
Iris and Rarbach, Sven and Pottebaum, Jens}, year={2025} }'
chicago: Gräßler, Iris, Sven Rarbach, and Jens Pottebaum. “Data Quality in the Engineering
of Circular Products - Decision Support for Circular Value Creation through Data
Ecosystems.” Industry 4.0 Science 2025, no. 2 (2025). https://doi.org/10.30844/i4se.25.2.12.
ieee: 'I. Gräßler, S. Rarbach, and J. Pottebaum, “Data Quality in the Engineering
of Circular Products - Decision support for circular value creation through data
ecosystems,” Industry 4.0 Science, vol. 2025, no. 2, 2025, doi: 10.30844/i4se.25.2.12.'
mla: Gräßler, Iris, et al. “Data Quality in the Engineering of Circular Products
- Decision Support for Circular Value Creation through Data Ecosystems.” Industry
4.0 Science, vol. 2025, no. 2, GITO mbH Verlag, 2025, doi:10.30844/i4se.25.2.12.
short: I. Gräßler, S. Rarbach, J. Pottebaum, Industry 4.0 Science 2025 (2025).
date_created: 2025-04-10T08:03:11Z
date_updated: 2025-04-10T08:04:33Z
department:
- _id: '152'
doi: 10.30844/i4se.25.2.12
intvolume: ' 2025'
issue: '2'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.30844/I4SE.25.2.12
oa: '1'
publication: Industry 4.0 Science
publication_identifier:
issn:
- 2942-6170
publication_status: published
publisher: GITO mbH Verlag
quality_controlled: '1'
status: public
title: Data Quality in the Engineering of Circular Products - Decision support for
circular value creation through data ecosystems
type: journal_article
user_id: '67999'
volume: 2025
year: '2025'
...
---
_id: '59483'
abstract:
- lang: eng
text: Abstract. The assessment of mechanically joined connections, such
as clinched connections, is usually conducted destructively. Applicable non-destructive
testing methods like computed tomography are time-consuming and costly, or, like
electrical resistance measurement, provide only a limited amount of information.
A fast, non-destructive evaluation of the joints condition shall be made possible
by using transient dynamic analysis (TDA). It is based on the introduction of
sound waves and the evaluation of the response behavior after passing through
the structure. This study focuses the application of TDA to clinched shear connections
to evaluate the performance of the tactile measuring setup. Twenty-one series
were investigated, covering variations in joining task, manufacturing and defect.
The evaluation was carried out using machine learning to determine for which series
characteristic signals may be detected. It was shown that a classification of
the investigated specimens is possible, whereby the classification accuracy depends
on the examined variation. Furthermore, the accuracy was evaluated as a function
of frequency and results were concluded to identify the limits of the used measuring
setup.
author:
- first_name: Gregor
full_name: Reschke, Gregor
last_name: Reschke
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
citation:
ama: 'Reschke G, Brosius A. Transient dynamic analysis: Performance evaluation of
tactile measurement. In: Materials Research Proceedings. Vol 52. Materials
Research Forum LLC; 2025:293-300. doi:10.21741/9781644903551-36'
apa: 'Reschke, G., & Brosius, A. (2025). Transient dynamic analysis: Performance
evaluation of tactile measurement. Materials Research Proceedings, 52,
293–300. https://doi.org/10.21741/9781644903551-36'
bibtex: '@inproceedings{Reschke_Brosius_2025, title={Transient dynamic analysis:
Performance evaluation of tactile measurement}, volume={52}, DOI={10.21741/9781644903551-36},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Reschke, Gregor and Brosius, Alexander}, year={2025}, pages={293–300}
}'
chicago: 'Reschke, Gregor, and Alexander Brosius. “Transient Dynamic Analysis: Performance
Evaluation of Tactile Measurement.” In Materials Research Proceedings,
52:293–300. Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903551-36.'
ieee: 'G. Reschke and A. Brosius, “Transient dynamic analysis: Performance evaluation
of tactile measurement,” in Materials Research Proceedings, Paderborn,
2025, vol. 52, pp. 293–300, doi: 10.21741/9781644903551-36.'
mla: 'Reschke, Gregor, and Alexander Brosius. “Transient Dynamic Analysis: Performance
Evaluation of Tactile Measurement.” Materials Research Proceedings, vol.
52, Materials Research Forum LLC, 2025, pp. 293–300, doi:10.21741/9781644903551-36.'
short: 'G. Reschke, A. Brosius, in: Materials Research Proceedings, Materials Research
Forum LLC, 2025, pp. 293–300.'
conference:
end_date: 2025-04-03
location: Paderborn
name: 21st SheMet Conference
start_date: 2025-04-01
date_created: 2025-04-10T11:27:20Z
date_updated: 2025-04-10T11:33:28Z
department:
- _id: '43'
- _id: '157'
doi: 10.21741/9781644903551-36
intvolume: ' 52'
keyword:
- Joining
- Machine Learning
- Transient Dynamic Analysis
language:
- iso: eng
page: 293-300
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
quality_controlled: '1'
status: public
title: 'Transient dynamic analysis: Performance evaluation of tactile measurement'
type: conference
user_id: '98812'
volume: 52
year: '2025'
...
---
_id: '59676'
author:
- first_name: André
full_name: Uhde, André
id: '36049'
last_name: Uhde
citation:
ama: 'Uhde A. Unternehmensbewertung als Verknüpfung von Investitions- und Finanzierungsprogramm.
In: Unternehmerische Finanzierungspolitik – Eine Wertorientierte Einführung.
; 2025.'
apa: Uhde, A. (2025). Unternehmensbewertung als Verknüpfung von Investitions- und
Finanzierungsprogramm. In Unternehmerische Finanzierungspolitik – eine wertorientierte
Einführung.
bibtex: '@inbook{Uhde_2025, title={Unternehmensbewertung als Verknüpfung von Investitions-
und Finanzierungsprogramm}, booktitle={Unternehmerische Finanzierungspolitik –
eine wertorientierte Einführung}, author={Uhde, André}, year={2025} }'
chicago: Uhde, André. “Unternehmensbewertung Als Verknüpfung von Investitions- Und
Finanzierungsprogramm.” In Unternehmerische Finanzierungspolitik – Eine Wertorientierte
Einführung, 2025.
ieee: A. Uhde, “Unternehmensbewertung als Verknüpfung von Investitions- und Finanzierungsprogramm,”
in Unternehmerische Finanzierungspolitik – eine wertorientierte Einführung,
2025.
mla: Uhde, André. “Unternehmensbewertung Als Verknüpfung von Investitions- Und Finanzierungsprogramm.”
Unternehmerische Finanzierungspolitik – Eine Wertorientierte Einführung,
2025.
short: 'A. Uhde, in: Unternehmerische Finanzierungspolitik – Eine Wertorientierte
Einführung, 2025.'
date_created: 2025-04-25T05:53:00Z
date_updated: 2025-04-25T06:05:18Z
department:
- _id: '19'
language:
- iso: eng
publication: Unternehmerische Finanzierungspolitik – eine wertorientierte Einführung
publication_identifier:
isbn:
- 978-3-7910-3086-9
status: public
title: Unternehmensbewertung als Verknüpfung von Investitions- und Finanzierungsprogramm
type: book_chapter
user_id: '36049'
year: '2025'
...
---
_id: '59674'
author:
- first_name: André
full_name: Uhde, André
id: '36049'
last_name: Uhde
citation:
ama: 'Uhde A. Ermittlung der Kosten des Eigen- und Fremdkapitals. In: Unternehmerische
Finanzierungspolitik – eine wertorientierte Einführung. ; 2025.'
apa: Uhde, A. (2025). Ermittlung der Kosten des Eigen- und Fremdkapitals. In Unternehmerische
Finanzierungspolitik – eine wertorientierte Einführung.
bibtex: '@inbook{Uhde_2025, title={Ermittlung der Kosten des Eigen- und Fremdkapitals},
booktitle={Unternehmerische Finanzierungspolitik – eine wertorientierte Einführung},
author={Uhde, André}, year={2025} }'
chicago: Uhde, André. “Ermittlung der Kosten des Eigen- und Fremdkapitals.” In Unternehmerische
Finanzierungspolitik – eine wertorientierte Einführung, 2025.
ieee: A. Uhde, “Ermittlung der Kosten des Eigen- und Fremdkapitals,” in Unternehmerische
Finanzierungspolitik – eine wertorientierte Einführung, 2025.
mla: Uhde, André. “Ermittlung der Kosten des Eigen- und Fremdkapitals.” Unternehmerische
Finanzierungspolitik – eine wertorientierte Einführung, 2025.
short: 'A. Uhde, in: Unternehmerische Finanzierungspolitik – eine wertorientierte
Einführung, 2025.'
date_created: 2025-04-25T05:50:54Z
date_updated: 2025-04-25T06:05:12Z
department:
- _id: '19'
language:
- iso: ger
publication: Unternehmerische Finanzierungspolitik – eine wertorientierte Einführung
publication_identifier:
isbn:
- 978-3-7910-3086-9
status: public
title: Ermittlung der Kosten des Eigen- und Fremdkapitals
type: book_chapter
user_id: '36049'
year: '2025'
...
---
_id: '59675'
author:
- first_name: André
full_name: Uhde, André
id: '36049'
last_name: Uhde
citation:
ama: 'Uhde A. Relevanz und Wertbeitrag der Kapitalstruktur. In: Unternehmerische
Finanzierungspolitik – Eine Wertorientierte Einführung. ; 2025.'
apa: Uhde, A. (2025). Relevanz und Wertbeitrag der Kapitalstruktur. In Unternehmerische
Finanzierungspolitik – eine wertorientierte Einführung.
bibtex: '@inbook{Uhde_2025, title={Relevanz und Wertbeitrag der Kapitalstruktur},
booktitle={Unternehmerische Finanzierungspolitik – eine wertorientierte Einführung},
author={Uhde, André}, year={2025} }'
chicago: Uhde, André. “Relevanz Und Wertbeitrag Der Kapitalstruktur.” In Unternehmerische
Finanzierungspolitik – Eine Wertorientierte Einführung, 2025.
ieee: A. Uhde, “Relevanz und Wertbeitrag der Kapitalstruktur,” in Unternehmerische
Finanzierungspolitik – eine wertorientierte Einführung, 2025.
mla: Uhde, André. “Relevanz Und Wertbeitrag Der Kapitalstruktur.” Unternehmerische
Finanzierungspolitik – Eine Wertorientierte Einführung, 2025.
short: 'A. Uhde, in: Unternehmerische Finanzierungspolitik – Eine Wertorientierte
Einführung, 2025.'
date_created: 2025-04-25T05:52:00Z
date_updated: 2025-04-25T06:05:15Z
department:
- _id: '19'
language:
- iso: eng
publication: Unternehmerische Finanzierungspolitik – eine wertorientierte Einführung
publication_identifier:
isbn:
- 978-3-7910-3086-9
status: public
title: Relevanz und Wertbeitrag der Kapitalstruktur
type: book_chapter
user_id: '36049'
year: '2025'
...
---
_id: '59681'
citation:
ama: Uhde A, Paul S, Horsch A, Kaltofen D, Weiß G, eds. Unternehmerische Finanzierungspolitik
- Eine Wertorientierte Einführung.; 2025.
apa: Uhde, A., Paul, S., Horsch, A., Kaltofen, D., & Weiß, G. (Eds.). (2025).
Unternehmerische Finanzierungspolitik - Eine wertorientierte Einführung.
bibtex: '@book{Uhde_Paul_Horsch_Kaltofen_Weiß_2025, title={Unternehmerische Finanzierungspolitik
- Eine wertorientierte Einführung}, year={2025} }'
chicago: Uhde, André, Stephan Paul, Andreas Horsch, Daniel Kaltofen, and Gregor
Weiß, eds. Unternehmerische Finanzierungspolitik - Eine Wertorientierte Einführung,
2025.
ieee: A. Uhde, S. Paul, A. Horsch, D. Kaltofen, and G. Weiß, Eds., Unternehmerische
Finanzierungspolitik - Eine wertorientierte Einführung. 2025.
mla: Uhde, André, et al., editors. Unternehmerische Finanzierungspolitik - Eine
Wertorientierte Einführung. 2025.
short: A. Uhde, S. Paul, A. Horsch, D. Kaltofen, G. Weiß, eds., Unternehmerische
Finanzierungspolitik - Eine Wertorientierte Einführung, 2025.
date_created: 2025-04-25T06:03:39Z
date_updated: 2025-04-25T06:05:26Z
department:
- _id: '19'
editor:
- first_name: André
full_name: Uhde, André
id: '36049'
last_name: Uhde
- first_name: Stephan
full_name: Paul, Stephan
last_name: Paul
- first_name: Andreas
full_name: Horsch, Andreas
last_name: Horsch
- first_name: Daniel
full_name: Kaltofen, Daniel
last_name: Kaltofen
- first_name: Gregor
full_name: Weiß, Gregor
last_name: Weiß
language:
- iso: eng
publication_identifier:
isbn:
- 978-3-7910-3086-9
status: public
title: Unternehmerische Finanzierungspolitik - Eine wertorientierte Einführung
type: book_editor
user_id: '36049'
year: '2025'
...
---
_id: '59683'
abstract:
- lang: eng
text: "Woven fibre-reinforced polymers are used in a variety of application, especially
where a low mass to stiffness ratio is required. Of paramount importance for the
tailored mechanical properties these composite materials exhibit is the type and
geometry of the fibre weave. Especially continuous fibre-reinforced thermoplastic
composites are fabricated as laminates and subsequently exposed to forming processes
which alter the geometry of the fibres unit cell and thus the local mechanical
properties of the material. An approach utilising broadband ultrasonic waves is
proposed to non-destructively determine the geometry of the unit cell of the weave.\r\n\r\nThe
dispersive behaviour of woven fibre-reinforced sheets is described in accordance
with the Flouquet-Bloch theorem as a phononic crystal. In order to develop a model
for a description of these periodically structured waveguides, the smallest repeating
unit of the wave is modelled with periodic boundary conditions. The resulting
dispersion diagram exhibits similarities to that of a homogeneous plate, but additionally
displays a periodicity in the wavenumber regime, which correspond with the size
of the unit cell. Experimental studies of the dispersive behaviour of acoustic
waves in woven fibre-reinforced samples also show a periodicity in the wavenumber
regime, enabling a measurement procedure of the unit cell geometry."
author:
- first_name: Mareen
full_name: Wippermann, Mareen
id: '74624'
last_name: Wippermann
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Philipp
full_name: Brandes, Philipp
id: '70091'
last_name: Brandes
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Wippermann M, Claes L, Brandes P, Moritzer E, Henning B. Determination of
the unit cell geometry in fibre-reinforced polymer sheets using guided acoustic
waves. In: ; 2025. doi:10.71568/DASDAGA2025.116'
apa: Wippermann, M., Claes, L., Brandes, P., Moritzer, E., & Henning, B. (2025).
Determination of the unit cell geometry in fibre-reinforced polymer sheets
using guided acoustic waves. DAS | DAGA 2025 - 51st Annual Meeting on Acoustics,
Copenhagen. https://doi.org/10.71568/DASDAGA2025.116
bibtex: '@inproceedings{Wippermann_Claes_Brandes_Moritzer_Henning_2025, title={Determination
of the unit cell geometry in fibre-reinforced polymer sheets using guided acoustic
waves}, DOI={10.71568/DASDAGA2025.116},
author={Wippermann, Mareen and Claes, Leander and Brandes, Philipp and Moritzer,
Elmar and Henning, Bernd}, year={2025} }'
chicago: Wippermann, Mareen, Leander Claes, Philipp Brandes, Elmar Moritzer, and
Bernd Henning. “Determination of the Unit Cell Geometry in Fibre-Reinforced Polymer
Sheets Using Guided Acoustic Waves,” 2025. https://doi.org/10.71568/DASDAGA2025.116.
ieee: 'M. Wippermann, L. Claes, P. Brandes, E. Moritzer, and B. Henning, “Determination
of the unit cell geometry in fibre-reinforced polymer sheets using guided acoustic
waves,” presented at the DAS | DAGA 2025 - 51st Annual Meeting on Acoustics, Copenhagen,
2025, doi: 10.71568/DASDAGA2025.116.'
mla: Wippermann, Mareen, et al. Determination of the Unit Cell Geometry in Fibre-Reinforced
Polymer Sheets Using Guided Acoustic Waves. 2025, doi:10.71568/DASDAGA2025.116.
short: 'M. Wippermann, L. Claes, P. Brandes, E. Moritzer, B. Henning, in: 2025.'
conference:
end_date: 2025-03-20
location: Copenhagen
name: DAS | DAGA 2025 - 51st Annual Meeting on Acoustics
start_date: 2025-03-17
date_created: 2025-04-25T06:46:31Z
date_updated: 2025-04-25T08:58:02Z
department:
- _id: '49'
- _id: '147'
doi: 10.71568/DASDAGA2025.116
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '157'
grant_number: '495847374'
name: 'FaMOUS: Ein ultraschallbasiertes Messverfahren unter Berücksichtigung viskoelastischer
Eigenschaften zur Charakterisierung der Faser-Matrix-Haftung bei Organoblechen
sowie deren realitätsnahe Modellierung'
status: public
title: Determination of the unit cell geometry in fibre-reinforced polymer sheets
using guided acoustic waves
type: conference
user_id: '11829'
year: '2025'
...
---
_id: '59688'
author:
- first_name: Leander
full_name: Claes, Leander
id: '11829'
last_name: Claes
orcid: 0000-0002-4393-268X
- first_name: Henning
full_name: Zeipert, Henning
id: '32580'
last_name: Zeipert
- first_name: Philipp
full_name: Brandes, Philipp
id: '70091'
last_name: Brandes
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
- first_name: Bernd
full_name: Henning, Bernd
id: '213'
last_name: Henning
citation:
ama: 'Claes L, Zeipert H, Brandes P, Moritzer E, Henning B. Assessment of Fibre-Matrix
Adhesion in Reinforced Polymers by Modal Damping of Guided Acoustic Waves. In:
; 2025. doi:10.71568/DASDAGA2025.052'
apa: Claes, L., Zeipert, H., Brandes, P., Moritzer, E., & Henning, B. (2025).
Assessment of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping
of Guided Acoustic Waves. DAS | DAGA 2025 - 51st Annual Meeting on Acoustics,
Copenhagen. https://doi.org/10.71568/DASDAGA2025.052
bibtex: '@inproceedings{Claes_Zeipert_Brandes_Moritzer_Henning_2025, title={Assessment
of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping of Guided Acoustic
Waves}, DOI={10.71568/DASDAGA2025.052},
author={Claes, Leander and Zeipert, Henning and Brandes, Philipp and Moritzer,
Elmar and Henning, Bernd}, year={2025} }'
chicago: Claes, Leander, Henning Zeipert, Philipp Brandes, Elmar Moritzer, and Bernd
Henning. “Assessment of Fibre-Matrix Adhesion in Reinforced Polymers by Modal
Damping of Guided Acoustic Waves,” 2025. https://doi.org/10.71568/DASDAGA2025.052.
ieee: 'L. Claes, H. Zeipert, P. Brandes, E. Moritzer, and B. Henning, “Assessment
of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping of Guided Acoustic
Waves,” presented at the DAS | DAGA 2025 - 51st Annual Meeting on Acoustics, Copenhagen,
2025, doi: 10.71568/DASDAGA2025.052.'
mla: Claes, Leander, et al. Assessment of Fibre-Matrix Adhesion in Reinforced
Polymers by Modal Damping of Guided Acoustic Waves. 2025, doi:10.71568/DASDAGA2025.052.
short: 'L. Claes, H. Zeipert, P. Brandes, E. Moritzer, B. Henning, in: 2025.'
conference:
end_date: 2025-03-20
location: Copenhagen
name: DAS | DAGA 2025 - 51st Annual Meeting on Acoustics
start_date: 2025-03-17
date_created: 2025-04-25T08:48:10Z
date_updated: 2025-04-25T08:50:11Z
department:
- _id: '49'
- _id: '147'
doi: 10.71568/DASDAGA2025.052
language:
- iso: eng
main_file_link:
- open_access: '1'
oa: '1'
project:
- _id: '157'
grant_number: '495847374'
name: 'FaMOUS: Ein ultraschallbasiertes Messverfahren unter Berücksichtigung viskoelastischer
Eigenschaften zur Charakterisierung der Faser-Matrix-Haftung bei Organoblechen
sowie deren realitätsnahe Modellierung'
status: public
title: Assessment of Fibre-Matrix Adhesion in Reinforced Polymers by Modal Damping
of Guided Acoustic Waves
type: conference
user_id: '11829'
year: '2025'
...
---
_id: '59875'
author:
- first_name: Ricarda
full_name: Pätz, Ricarda
id: '73151'
last_name: Pätz
citation:
ama: 'Pätz R. #womeninstem – Eine gendermediale Betrachtung von MINTfluencerinnen
und Wissenschaftskommunikation auf Instagram. In: Uppenkamp V, Vösgen-Nordloh
M, eds. Data - Culture - Society: Kulturwissenschaftliche Perspektiven auf
Data Society als gesellschaftliche Transformation. Herder; 2025:155-176.'
apa: 'Pätz, R. (2025). #womeninstem – Eine gendermediale Betrachtung von MINTfluencerinnen
und Wissenschaftskommunikation auf Instagram. In V. Uppenkamp & M. Vösgen-Nordloh
(Eds.), Data - Culture - Society: Kulturwissenschaftliche Perspektiven auf
Data Society als gesellschaftliche Transformation (pp. 155–176). Herder.'
bibtex: '@inbook{Pätz_2025, place={Freiburg im Breisgau}, title={#womeninstem –
Eine gendermediale Betrachtung von MINTfluencerinnen und Wissenschaftskommunikation
auf Instagram}, booktitle={Data - Culture - Society: Kulturwissenschaftliche Perspektiven
auf Data Society als gesellschaftliche Transformation}, publisher={Herder}, author={Pätz,
Ricarda}, editor={Uppenkamp, Vera and Vösgen-Nordloh, Meike}, year={2025}, pages={155–176}
}'
chicago: 'Pätz, Ricarda. “#womeninstem – Eine gendermediale Betrachtung von MINTfluencerinnen
und Wissenschaftskommunikation auf Instagram.” In Data - Culture - Society:
Kulturwissenschaftliche Perspektiven auf Data Society als gesellschaftliche Transformation,
edited by Vera Uppenkamp and Meike Vösgen-Nordloh, 155–76. Freiburg im Breisgau:
Herder, 2025.'
ieee: 'R. Pätz, “#womeninstem – Eine gendermediale Betrachtung von MINTfluencerinnen
und Wissenschaftskommunikation auf Instagram,” in Data - Culture - Society:
Kulturwissenschaftliche Perspektiven auf Data Society als gesellschaftliche Transformation,
V. Uppenkamp and M. Vösgen-Nordloh, Eds. Freiburg im Breisgau: Herder, 2025, pp.
155–176.'
mla: 'Pätz, Ricarda. “#womeninstem – Eine gendermediale Betrachtung von MINTfluencerinnen
und Wissenschaftskommunikation auf Instagram.” Data - Culture - Society: Kulturwissenschaftliche
Perspektiven auf Data Society als gesellschaftliche Transformation, edited
by Vera Uppenkamp and Meike Vösgen-Nordloh, Herder, 2025, pp. 155–76.'
short: 'R. Pätz, in: V. Uppenkamp, M. Vösgen-Nordloh (Eds.), Data - Culture - Society:
Kulturwissenschaftliche Perspektiven auf Data Society als gesellschaftliche Transformation,
Herder, Freiburg im Breisgau, 2025, pp. 155–176.'
date_created: 2025-05-13T06:08:38Z
date_updated: 2025-05-13T06:09:33Z
editor:
- first_name: Vera
full_name: Uppenkamp, Vera
last_name: Uppenkamp
- first_name: Meike
full_name: Vösgen-Nordloh, Meike
last_name: Vösgen-Nordloh
language:
- iso: ger
main_file_link:
- open_access: '1'
url: https://www.herder.de/wissen/shop/p8/90095-data-culture-society-open-access-pdf/
oa: '1'
page: 155-176
place: Freiburg im Breisgau
publication: 'Data - Culture - Society: Kulturwissenschaftliche Perspektiven auf Data
Society als gesellschaftliche Transformation'
publication_identifier:
eisbn:
- '978-3-534-64166-6 '
isbn:
- '978-3-534-64165-9 '
publication_status: published
publisher: Herder
status: public
title: '#womeninstem – Eine gendermediale Betrachtung von MINTfluencerinnen und Wissenschaftskommunikation
auf Instagram'
type: book_chapter
user_id: '73151'
year: '2025'
...
---
_id: '59876'
abstract:
- lang: eng
text: 'Abstract. Clinching is a conventional mechanical joining process
used in Multi-Material Design in the automotive sector. To receive the desired
geometrical characteristics in clinch joints, correct process design is required.
To reduce the cost of finding fitting process parameters, numerical simulation
of the joining process can be used to predict the geometrical characteristics,
such as interlock, instead of an experimental approach. These numerical simulation
models consume computational resources and time. In this paper machine learning
is used to find correlations between features of the joining process and geometrical
characteristics in the joint. This serves the purpose of predicting the joint’s
target values more resource-efficiently. Modelling with machine learning requires
a structured dataset with sufficient parameter variation. To create this data
base the following procedure was used. For joining partners, a HC340LA steel alloy
with 2 mm material thickness was used punch-sided and an EN AW 5182 aluminum alloy
with 1.5 mm thickness was used die-sided. For this combination a suitable tool
combination and punch distance was experimentally identified. A finite element
model was created to reproduce the joining process. For the modelling of the material
of both joining partners flow curves determined by Vallaster et al. were used
[1]. The punch and die were recreated digitally by opto-electronic measurements
and transformed into a mesh suitable for numerical simulation. The model was validated
by comparing process values like the maximum force applied by the punch and geometrical
values in the joints cross section. Additionally, a process window for suitable
punch distances was experimentally determined. Afterwards a variation of 70 different
process designs was conducted with variants inside and outside the process window.
The results were used for training, testing and validating various machine learning
models. All models competed against each other to find the must suited model to
predict every geometric value. To ensure good model performances and prevent the
model from overfitting, a tenfold cross validation was used for validating the
models. Analysis of the results gives the following key findings: i) Good predictability
is reached for the interlock and sheet thickness of the joint. ii) Prediction
neck thickness showed low error values, but also low correlation. iii)The prediction
of those key values for evaluating clinch joint characteristics by machine learning
models positively impacts needed resources in comparison to numerical models.'
author:
- first_name: Jean-Patrick
full_name: Ludwig, Jean-Patrick
id: '76631'
last_name: Ludwig
- first_name: 'Seraphin '
full_name: 'Tsi-Nda Lontsi, Seraphin '
last_name: Tsi-Nda Lontsi
- first_name: Jonas
full_name: Neumann, Jonas
last_name: Neumann
- first_name: Lukas
full_name: Kappis, Lukas
last_name: Kappis
- first_name: 'Christian '
full_name: 'Scharr, Christian '
last_name: Scharr
- first_name: Wilko
full_name: Flügge, Wilko
last_name: Flügge
- first_name: Marion
full_name: Merklein, Marion
last_name: Merklein
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: 'Ludwig J-P, Tsi-Nda Lontsi S, Neumann J, et al. Data driven prognosis of clinch
joints in multi-material design. In: Materials Research Proceedings. Vol
54. Materials Research Forum LLC; 2025. doi:10.21741/9781644903599-157'
apa: Ludwig, J.-P., Tsi-Nda Lontsi, S., Neumann, J., Kappis, L., Scharr, C., Flügge,
W., Merklein, M., & Meschut, G. (2025). Data driven prognosis of clinch joints
in multi-material design. Materials Research Proceedings, 54. https://doi.org/10.21741/9781644903599-157
bibtex: '@inproceedings{Ludwig_Tsi-Nda Lontsi_Neumann_Kappis_Scharr_Flügge_Merklein_Meschut_2025,
place={Paestum}, title={Data driven prognosis of clinch joints in multi-material
design}, volume={54}, DOI={10.21741/9781644903599-157},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Ludwig, Jean-Patrick and Tsi-Nda Lontsi, Seraphin and Neumann,
Jonas and Kappis, Lukas and Scharr, Christian and Flügge, Wilko and Merklein,
Marion and Meschut, Gerson}, year={2025} }'
chicago: 'Ludwig, Jean-Patrick, Seraphin Tsi-Nda Lontsi, Jonas Neumann, Lukas Kappis,
Christian Scharr, Wilko Flügge, Marion Merklein, and Gerson Meschut. “Data Driven
Prognosis of Clinch Joints in Multi-Material Design.” In Materials Research
Proceedings, Vol. 54. Paestum: Materials Research Forum LLC, 2025. https://doi.org/10.21741/9781644903599-157.'
ieee: 'J.-P. Ludwig et al., “Data driven prognosis of clinch joints in multi-material
design,” in Materials Research Proceedings, 2025, vol. 54, doi: 10.21741/9781644903599-157.'
mla: Ludwig, Jean-Patrick, et al. “Data Driven Prognosis of Clinch Joints in Multi-Material
Design.” Materials Research Proceedings, vol. 54, Materials Research Forum
LLC, 2025, doi:10.21741/9781644903599-157.
short: 'J.-P. Ludwig, S. Tsi-Nda Lontsi, J. Neumann, L. Kappis, C. Scharr, W. Flügge,
M. Merklein, G. Meschut, in: Materials Research Proceedings, Materials Research
Forum LLC, Paestum, 2025.'
date_created: 2025-05-13T06:51:37Z
date_updated: 2025-05-13T07:20:19Z
department:
- _id: '157'
doi: 10.21741/9781644903599-157
intvolume: ' 54'
language:
- iso: eng
place: Paestum
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: Data driven prognosis of clinch joints in multi-material design
type: conference
user_id: '76631'
volume: 54
year: '2025'
...