---
_id: '59905'
abstract:
- lang: ger
text: Um die international und national beschlossenen Klimaziele zu erreichen, müssen
die verkehrsbedingten Emissionen in der Bundesrepublik Deutschland drastisch reduziert
werden. Hierzu bedarf es einer umfassenden Mobilitätswende, welche die Etablierung
emissionsärmerer und effizienterer Mobilitätsformen umfasst. Ein Lösungsansatz
können on-demand Dienste bieten, die den öffentlichen Personennahverkehr bedarfsgerecht
gestalten und so dessen Akzeptanz steigern. Zahlreiche bisher eingeführte on-demand
Dienste mussten jedoch nach Beendigung des Projekt- bzw. Förderzeitraums wieder
eingestellt werden. Maßgebliche Herausforderungen waren die Integration der Dienste
in die bestehenden ÖPNV- und Mobilitäts-Strukturen sowie teilweise damit einhergehende
ökonomische Aspekte. In diesem Beitrag wird eine Methode vorgestellt, welche neben
der Einführung neuartiger Mobilitätsdienste auch die Entwicklung eines nachhaltigen
Mobilitäts-Ökosystems anstrebt. Der Fokus liegt dabei auf ländlich geprägten Regionen
und ihren besonderen Herausforderungen im Bereich des öffentlichen Nahverkehrs.
Die Methode beschreibt ein fünf-phasiges Handlungsschema, in welchem Potenziale
bestehender Strukturen genutzt, Mobilitäts-Stakeholder eingebunden und verhärtete
Mobilitätsverhalten allmählich positiv verändert werden. Anhand der Initiative
Neue Mobilität Paderborn wird aufgezeigt, dass mithilfe der Methode erste Schritte
hin zu einem Mobilitäts-Ökosystem absolviert werden können. Darüber hinaus werden
Einführungsszenarien für die neuartige, sich noch in der Entwicklung befindliche
Mobilitätslösung NeMo.bil in einer Beispielregion erarbeitet.
author:
- first_name: Jonathan
full_name: Behm, Jonathan
last_name: Behm
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Julian
full_name: Bomm, Julian
last_name: Bomm
- first_name: Sören
full_name: Rahmann, Sören
last_name: Rahmann
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
citation:
ama: 'Behm J, Ostermann M, Bomm J, Rahmann S, Tröster T, Marten T. Einführungsstrategien
nachhaltiger on-demand Mobilitätkonzepte im öffentlichen Nahverkehr. In: New
Players in Mobility. Springer Fachmedien Wiesbaden; 2025. doi:10.1007/978-3-658-46485-1_36'
apa: Behm, J., Ostermann, M., Bomm, J., Rahmann, S., Tröster, T., & Marten,
T. (2025). Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen
Nahverkehr. In New Players in Mobility. 16. Wissenschaftsforum Mobilität,
Duisburg. Springer Fachmedien Wiesbaden. https://doi.org/10.1007/978-3-658-46485-1_36
bibtex: '@inbook{Behm_Ostermann_Bomm_Rahmann_Tröster_Marten_2025, place={Wiesbaden},
title={Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen
Nahverkehr}, DOI={10.1007/978-3-658-46485-1_36},
booktitle={New Players in Mobility}, publisher={Springer Fachmedien Wiesbaden},
author={Behm, Jonathan and Ostermann, Moritz and Bomm, Julian and Rahmann, Sören
and Tröster, Thomas and Marten, Thorsten}, year={2025} }'
chicago: 'Behm, Jonathan, Moritz Ostermann, Julian Bomm, Sören Rahmann, Thomas Tröster,
and Thorsten Marten. “Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte
im öffentlichen Nahverkehr.” In New Players in Mobility. Wiesbaden: Springer
Fachmedien Wiesbaden, 2025. https://doi.org/10.1007/978-3-658-46485-1_36.'
ieee: 'J. Behm, M. Ostermann, J. Bomm, S. Rahmann, T. Tröster, and T. Marten, “Einführungsstrategien
nachhaltiger on-demand Mobilitätkonzepte im öffentlichen Nahverkehr,” in New
Players in Mobility, Wiesbaden: Springer Fachmedien Wiesbaden, 2025.'
mla: Behm, Jonathan, et al. “Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte
im öffentlichen Nahverkehr.” New Players in Mobility, Springer Fachmedien
Wiesbaden, 2025, doi:10.1007/978-3-658-46485-1_36.
short: 'J. Behm, M. Ostermann, J. Bomm, S. Rahmann, T. Tröster, T. Marten, in: New
Players in Mobility, Springer Fachmedien Wiesbaden, Wiesbaden, 2025.'
conference:
end_date: 2024-06-13
location: Duisburg
name: 16. Wissenschaftsforum Mobilität
start_date: 2024-06-13
date_created: 2025-05-15T05:57:58Z
date_updated: 2025-05-15T06:03:45Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1007/978-3-658-46485-1_36
language:
- iso: ger
place: Wiesbaden
publication: New Players in Mobility
publication_identifier:
isbn:
- '9783658464844'
- '9783658464851'
publication_status: published
publisher: Springer Fachmedien Wiesbaden
status: public
title: Einführungsstrategien nachhaltiger on-demand Mobilitätkonzepte im öffentlichen
Nahverkehr
type: book_chapter
user_id: '44763'
year: '2025'
...
---
_id: '60031'
abstract:
- lang: eng
text: Reputation systems to rate companies’ performances remain largely unexplored
in research and are scarcely used in business-to-business (B2B) practice. Such
systems are essential for businesses seeking trustworthy partners, as they help
reduce information asymmetry, lower buyers' transaction risks, and allow high-quality
service providers to justify premium pricing. Unlike traditional review-based
systems in the business-to-consumer (B2C) context, we propose a B2B reputation
mechanism in which buyers commit to a rating payment before a transaction. Once
the buyer finalizes the rating, this payment is executed and recorded on a blockchain
as an immutable, secure ledger. Our system mimics natural trust-building mechanisms
with ratings that are (1) monetary-based, (2) stake-based, (3) non-aggregated,
(4) involve counter-ratings, (5) selectively sellable, (6) individually comparable,
(7) stored on a blockchain, (8) and monitored by a third instance. This system
provides a novel approach to fostering trust in B2B transactions by reducing information
asymmetry and transaction risk. We illustrate the mechanism’s application in the
consulting sector. Our analysis has identified 23 institutional trust and distrust
dimensions that promote establishing institutional trust through the proposed
mechanism. Qualitative interviews suggest that, while complex and challenging
to apply, this mechanism can foster trust in B2B transactions. Given the low maturity
in the application domain—rating professional business services with business
reputation systems—and solution domain—using monetary stakes for ratings, this
system stands as a potential invention.
article_type: original
author:
- first_name: Simon
full_name: Hemmrich, Simon
last_name: Hemmrich
- first_name: Volker
full_name: Nissen, Volker
last_name: Nissen
- first_name: Daniel
full_name: Beverugen, Daniel
last_name: Beverugen
- first_name: Josias Daniel Miño
full_name: Pauls, Josias Daniel Miño
last_name: Pauls
citation:
ama: 'Hemmrich S, Nissen V, Beverugen D, Pauls JDM. Blockchain-based reputation
systems for business-to-business services: designing a reputation mechanism to
reduce information asymmetry in professional consulting. Information Systems
and e-Business Management. Published online 2025. doi:10.1007/s10257-025-00702-9'
apa: 'Hemmrich, S., Nissen, V., Beverugen, D., & Pauls, J. D. M. (2025). Blockchain-based
reputation systems for business-to-business services: designing a reputation mechanism
to reduce information asymmetry in professional consulting. Information Systems
and E-Business Management. https://doi.org/10.1007/s10257-025-00702-9'
bibtex: '@article{Hemmrich_Nissen_Beverugen_Pauls_2025, title={Blockchain-based
reputation systems for business-to-business services: designing a reputation mechanism
to reduce information asymmetry in professional consulting}, DOI={10.1007/s10257-025-00702-9},
journal={Information Systems and e-Business Management}, publisher={Springer Science
and Business Media LLC}, author={Hemmrich, Simon and Nissen, Volker and Beverugen,
Daniel and Pauls, Josias Daniel Miño}, year={2025} }'
chicago: 'Hemmrich, Simon, Volker Nissen, Daniel Beverugen, and Josias Daniel Miño
Pauls. “Blockchain-Based Reputation Systems for Business-to-Business Services:
Designing a Reputation Mechanism to Reduce Information Asymmetry in Professional
Consulting.” Information Systems and E-Business Management, 2025. https://doi.org/10.1007/s10257-025-00702-9.'
ieee: 'S. Hemmrich, V. Nissen, D. Beverugen, and J. D. M. Pauls, “Blockchain-based
reputation systems for business-to-business services: designing a reputation mechanism
to reduce information asymmetry in professional consulting,” Information Systems
and e-Business Management, 2025, doi: 10.1007/s10257-025-00702-9.'
mla: 'Hemmrich, Simon, et al. “Blockchain-Based Reputation Systems for Business-to-Business
Services: Designing a Reputation Mechanism to Reduce Information Asymmetry in
Professional Consulting.” Information Systems and E-Business Management,
Springer Science and Business Media LLC, 2025, doi:10.1007/s10257-025-00702-9.'
short: S. Hemmrich, V. Nissen, D. Beverugen, J.D.M. Pauls, Information Systems and
E-Business Management (2025).
date_created: 2025-05-25T10:06:23Z
date_updated: 2025-05-25T10:12:00Z
ddc:
- '000'
department:
- _id: '195'
doi: 10.1007/s10257-025-00702-9
file:
- access_level: closed
content_type: application/pdf
creator: dabe
date_created: 2025-05-25T10:09:43Z
date_updated: 2025-05-25T10:09:43Z
file_id: '60032'
file_name: ISeB - Blockchain-Based Reputation Systems.pdf
file_size: 1440251
relation: main_file
success: 1
file_date_updated: 2025-05-25T10:09:43Z
has_accepted_license: '1'
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://link.springer.com/article/10.1007/s10257-025-00702-9?utm_source=rct_congratemailt&utm_medium=email&utm_campaign=oa_20250523&utm_content=10.1007%2Fs10257-025-00702-9
oa: '1'
publication: Information Systems and e-Business Management
publication_identifier:
issn:
- 1617-9846
- 1617-9854
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: 'Blockchain-based reputation systems for business-to-business services: designing
a reputation mechanism to reduce information asymmetry in professional consulting'
type: journal_article
user_id: '59677'
year: '2025'
...
---
_id: '60040'
article_number: '147787'
author:
- first_name: Nina
full_name: Pfeffer, Nina
last_name: Pfeffer
- first_name: Stefanie Nicole
full_name: Jäger, Stefanie Nicole
last_name: Jäger
- first_name: Maximilian Alexander
full_name: Kaiser, Maximilian Alexander
id: '72351'
last_name: Kaiser
orcid: 0009-0008-1333-3396
- first_name: Thomas
full_name: Meyer, Thomas
last_name: Meyer
- first_name: Andreas
full_name: Stark, Andreas
last_name: Stark
- first_name: Heinz Werner
full_name: Höppel, Heinz Werner
last_name: Höppel
citation:
ama: 'Pfeffer N, Jäger SN, Kaiser MA, Meyer T, Stark A, Höppel HW. Enhancing mechanical
strength of Ti-6Al-4V sheet material by short-time sub-β-transus solution heat
treatment and additional short-time annealing. Materials Science and Engineering:
A. 2025;926. doi:10.1016/j.msea.2025.147787'
apa: 'Pfeffer, N., Jäger, S. N., Kaiser, M. A., Meyer, T., Stark, A., & Höppel,
H. W. (2025). Enhancing mechanical strength of Ti-6Al-4V sheet material by short-time
sub-β-transus solution heat treatment and additional short-time annealing. Materials
Science and Engineering: A, 926, Article 147787. https://doi.org/10.1016/j.msea.2025.147787'
bibtex: '@article{Pfeffer_Jäger_Kaiser_Meyer_Stark_Höppel_2025, title={Enhancing
mechanical strength of Ti-6Al-4V sheet material by short-time sub-β-transus solution
heat treatment and additional short-time annealing}, volume={926}, DOI={10.1016/j.msea.2025.147787},
number={147787}, journal={Materials Science and Engineering: A}, publisher={Elsevier
BV}, author={Pfeffer, Nina and Jäger, Stefanie Nicole and Kaiser, Maximilian Alexander
and Meyer, Thomas and Stark, Andreas and Höppel, Heinz Werner}, year={2025} }'
chicago: 'Pfeffer, Nina, Stefanie Nicole Jäger, Maximilian Alexander Kaiser, Thomas
Meyer, Andreas Stark, and Heinz Werner Höppel. “Enhancing Mechanical Strength
of Ti-6Al-4V Sheet Material by Short-Time Sub-β-Transus Solution Heat Treatment
and Additional Short-Time Annealing.” Materials Science and Engineering: A
926 (2025). https://doi.org/10.1016/j.msea.2025.147787.'
ieee: 'N. Pfeffer, S. N. Jäger, M. A. Kaiser, T. Meyer, A. Stark, and H. W. Höppel,
“Enhancing mechanical strength of Ti-6Al-4V sheet material by short-time sub-β-transus
solution heat treatment and additional short-time annealing,” Materials Science
and Engineering: A, vol. 926, Art. no. 147787, 2025, doi: 10.1016/j.msea.2025.147787.'
mla: 'Pfeffer, Nina, et al. “Enhancing Mechanical Strength of Ti-6Al-4V Sheet Material
by Short-Time Sub-β-Transus Solution Heat Treatment and Additional Short-Time
Annealing.” Materials Science and Engineering: A, vol. 926, 147787, Elsevier
BV, 2025, doi:10.1016/j.msea.2025.147787.'
short: 'N. Pfeffer, S.N. Jäger, M.A. Kaiser, T. Meyer, A. Stark, H.W. Höppel, Materials
Science and Engineering: A 926 (2025).'
date_created: 2025-05-27T05:39:31Z
date_updated: 2025-05-27T05:56:52Z
department:
- _id: '9'
- _id: '321'
- _id: '149'
doi: 10.1016/j.msea.2025.147787
intvolume: ' 926'
language:
- iso: eng
publication: 'Materials Science and Engineering: A'
publication_identifier:
issn:
- 0921-5093
publication_status: published
publisher: Elsevier BV
status: public
title: Enhancing mechanical strength of Ti-6Al-4V sheet material by short-time sub-β-transus
solution heat treatment and additional short-time annealing
type: journal_article
user_id: '72351'
volume: 926
year: '2025'
...
---
_id: '59908'
author:
- first_name: Karina
full_name: Gevers, Karina
id: '83151'
last_name: Gevers
citation:
ama: Gevers K. Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden .
Shaker Verlag; 2025.
apa: Gevers, K. (2025). Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Shaker Verlag.
bibtex: '@book{Gevers_2025, place={Düren}, series={Schriftenreihe Kunststofftechnik
Paderborn }, title={Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
}, publisher={Shaker Verlag}, author={Gevers, Karina}, year={2025}, collection={Schriftenreihe
Kunststofftechnik Paderborn } }'
chicago: 'Gevers, Karina. Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Schriftenreihe Kunststofftechnik Paderborn . Düren: Shaker Verlag, 2025.'
ieee: 'K. Gevers, Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Düren: Shaker Verlag, 2025.'
mla: Gevers, Karina. Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden
. Shaker Verlag, 2025.
short: K. Gevers, Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden ,
Shaker Verlag, Düren, 2025.
date_created: 2025-05-15T09:59:23Z
date_updated: 2025-05-28T15:59:35Z
department:
- _id: '148'
- _id: '9'
- _id: '321'
extern: '1'
keyword:
- Infrarotschweißen
- Zeitfestigkeit
- Polyamide
language:
- iso: ger
page: '216'
place: Düren
publication_identifier:
isbn:
- '978-3-8440-9978-2 '
publication_status: published
publisher: Shaker Verlag
series_title: 'Schriftenreihe Kunststofftechnik Paderborn '
status: public
title: 'Zeitfestigkeit von infrarotgeschweißten gefüllten Polyamiden '
type: dissertation
user_id: '83151'
year: '2025'
...
---
_id: '60108'
abstract:
- lang: eng
text: Abstract. In the field of mechanical engineering, destructive tests
such as shear tests of mechanical joints are usually followed by imaging methods
such as microsectioning or computed tomography (CT). They can help to interpret
the measured load-displacement curves, analyze the failure behavior and validate
numerical models. However, due to unloading, springback effects and crack closures
can occur, which influence the state of the investigated specimen. In this context,
in situ CT is able to explore the testing process with a specimen under load avoiding
these influences. For in situ CT investigations, the displacement increase is
interrupted at certain stop points. While the displacement is kept constant, the
CT scan is performed. However, it was observed that the reaction force reduces
during CT scanning, e. g. due to settling effects in the test setup. Although
in situ CT is established now in research, little attention is paid to the uncertainties
which arise from the discontinuous testing procedure. This study systematically
explores the impact of these interruptions on the load-displacement behavior and
the geometry of clinch points during tensile shear testing. To quantify the influence
of the interruptions, loads at defined displacement levels and the final geometry
are evaluated statistically. We found, that the load-displacement behavior of
both test groups is similar. Despite some small but significant statistical deviations
of the loads and the final geometry, our results show that, discontinuous testing
has a high level of significance for the phenomena overserved in shear tests with
clinch points.
author:
- first_name: D.
full_name: Köhler, D.
last_name: Köhler
- first_name: J
full_name: Troschitz, J
last_name: Troschitz
- first_name: R.
full_name: Kupfer, R.
last_name: Kupfer
- first_name: M.
full_name: Gude, M.
last_name: Gude
citation:
ama: 'Köhler D, Troschitz J, Kupfer R, Gude M. In situ computed tomography – Analysis
of settling effects during single-lap shear tests with clinch points. In: Materials
Research Proceedings. Vol 52. Materials Research Forum LLC; 2025. doi:10.21741/9781644903551-15'
apa: Köhler, D., Troschitz, J., Kupfer, R., & Gude, M. (2025). In situ computed
tomography – Analysis of settling effects during single-lap shear tests with clinch
points. Materials Research Proceedings, 52. https://doi.org/10.21741/9781644903551-15
bibtex: '@inproceedings{Köhler_Troschitz_Kupfer_Gude_2025, title={In situ computed
tomography – Analysis of settling effects during single-lap shear tests with clinch
points}, volume={52}, DOI={10.21741/9781644903551-15},
booktitle={Materials Research Proceedings}, publisher={Materials Research Forum
LLC}, author={Köhler, D. and Troschitz, J and Kupfer, R. and Gude, M.}, year={2025}
}'
chicago: Köhler, D., J Troschitz, R. Kupfer, and M. Gude. “In Situ Computed Tomography
– Analysis of Settling Effects during Single-Lap Shear Tests with Clinch Points.”
In Materials Research Proceedings, Vol. 52. Materials Research Forum LLC,
2025. https://doi.org/10.21741/9781644903551-15.
ieee: 'D. Köhler, J. Troschitz, R. Kupfer, and M. Gude, “In situ computed tomography
– Analysis of settling effects during single-lap shear tests with clinch points,”
in Materials Research Proceedings, 2025, vol. 52, doi: 10.21741/9781644903551-15.'
mla: Köhler, D., et al. “In Situ Computed Tomography – Analysis of Settling Effects
during Single-Lap Shear Tests with Clinch Points.” Materials Research Proceedings,
vol. 52, Materials Research Forum LLC, 2025, doi:10.21741/9781644903551-15.
short: 'D. Köhler, J. Troschitz, R. Kupfer, M. Gude, in: Materials Research Proceedings,
Materials Research Forum LLC, 2025.'
date_created: 2025-06-02T20:05:01Z
date_updated: 2025-06-02T20:18:20Z
department:
- _id: '157'
- _id: '43'
doi: 10.21741/9781644903551-15
intvolume: ' 52'
language:
- iso: eng
project:
- _id: '130'
grant_number: '418701707'
name: 'TRR 285: TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '148'
name: 'TRR 285 – C04: TRR 285 - Subproject C04'
publication: Materials Research Proceedings
publication_identifier:
issn:
- 2474-395X
publication_status: published
publisher: Materials Research Forum LLC
status: public
title: In situ computed tomography – Analysis of settling effects during single-lap
shear tests with clinch points
type: conference
user_id: '83408'
volume: 52
year: '2025'
...
---
_id: '60116'
author:
- first_name: Stefan
full_name: Schröder, Stefan
last_name: Schröder
- first_name: Miriam
full_name: Kehne, Miriam
id: '129'
last_name: Kehne
- first_name: Nils
full_name: Neuber, Nils
last_name: Neuber
- first_name: Jessica
full_name: Süßenbach, Jessica
last_name: Süßenbach
citation:
ama: Schröder S, Kehne M, Neuber N, Süßenbach J. Qualitätsentwicklung von Bewegungs‑,
Spiel- und Sportangeboten im Ganztag – Ansatzpunkte für einen Orientierungsrahmen
Quality development of exercise, play and sport programmes in all-day schools—starting
points for an orientation framework. Forum Kinder- und Jugendsport. 2025;6(1):42-48.
doi:10.1007/s43594-025-00151-9
apa: Schröder, S., Kehne, M., Neuber, N., & Süßenbach, J. (2025). Qualitätsentwicklung
von Bewegungs‑, Spiel- und Sportangeboten im Ganztag – Ansatzpunkte für einen
Orientierungsrahmen Quality development of exercise, play and sport programmes
in all-day schools—starting points for an orientation framework. Forum Kinder-
und Jugendsport, 6(1), 42–48. https://doi.org/10.1007/s43594-025-00151-9
bibtex: '@article{Schröder_Kehne_Neuber_Süßenbach_2025, title={Qualitätsentwicklung
von Bewegungs‑, Spiel- und Sportangeboten im Ganztag – Ansatzpunkte für einen
Orientierungsrahmen Quality development of exercise, play and sport programmes
in all-day schools—starting points for an orientation framework}, volume={6},
DOI={10.1007/s43594-025-00151-9},
number={1}, journal={Forum Kinder- und Jugendsport}, publisher={Springer Science
and Business Media LLC}, author={Schröder, Stefan and Kehne, Miriam and Neuber,
Nils and Süßenbach, Jessica}, year={2025}, pages={42–48} }'
chicago: 'Schröder, Stefan, Miriam Kehne, Nils Neuber, and Jessica Süßenbach. “Qualitätsentwicklung
von Bewegungs‑, Spiel- und Sportangeboten im Ganztag – Ansatzpunkte für einen
Orientierungsrahmen Quality development of exercise, play and sport programmes
in all-day schools—starting points for an orientation framework.” Forum Kinder-
und Jugendsport 6, no. 1 (2025): 42–48. https://doi.org/10.1007/s43594-025-00151-9.'
ieee: 'S. Schröder, M. Kehne, N. Neuber, and J. Süßenbach, “Qualitätsentwicklung
von Bewegungs‑, Spiel- und Sportangeboten im Ganztag – Ansatzpunkte für einen
Orientierungsrahmen Quality development of exercise, play and sport programmes
in all-day schools—starting points for an orientation framework,” Forum Kinder-
und Jugendsport, vol. 6, no. 1, pp. 42–48, 2025, doi: 10.1007/s43594-025-00151-9.'
mla: Schröder, Stefan, et al. “Qualitätsentwicklung von Bewegungs‑, Spiel- und Sportangeboten
im Ganztag – Ansatzpunkte für einen Orientierungsrahmen Quality development of
exercise, play and sport programmes in all-day schools—starting points for an
orientation framework.” Forum Kinder- und Jugendsport, vol. 6, no. 1, Springer
Science and Business Media LLC, 2025, pp. 42–48, doi:10.1007/s43594-025-00151-9.
short: S. Schröder, M. Kehne, N. Neuber, J. Süßenbach, Forum Kinder- und Jugendsport
6 (2025) 42–48.
date_created: 2025-06-03T09:36:13Z
date_updated: 2025-06-03T09:38:45Z
department:
- _id: '17'
- _id: '318'
doi: 10.1007/s43594-025-00151-9
intvolume: ' 6'
issue: '1'
language:
- iso: ger
page: 42-48
publication: Forum Kinder- und Jugendsport
publication_identifier:
issn:
- 2730-7212
- 2730-7220
publication_status: published
publisher: Springer Science and Business Media LLC
status: public
title: Qualitätsentwicklung von Bewegungs‑, Spiel- und Sportangeboten im Ganztag –
Ansatzpunkte für einen Orientierungsrahmen Quality development of exercise, play
and sport programmes in all-day schools—starting points for an orientation framework
type: journal_article
user_id: '129'
volume: 6
year: '2025'
...
---
_id: '60081'
article_number: '119763'
author:
- first_name: Marius
full_name: Naumann, Marius
id: '94950'
last_name: Naumann
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Nadja
full_name: Buchenau, Nadja
last_name: Buchenau
- first_name: Jannik
full_name: Oetzel, Jannik
last_name: Oetzel
- first_name: Florian
full_name: Schlosser, Florian
id: '88614'
last_name: Schlosser
- first_name: Henning
full_name: Meschede, Henning
id: '86954'
last_name: Meschede
orcid: 0000-0002-1538-089X
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Naumann M, Ostermann M, Buchenau N, et al. Energy efficiency improvement for
decarbonization in manufacturing industry: A review. Energy Conversion and
Management. 2025;338. doi:10.1016/j.enconman.2025.119763'
apa: 'Naumann, M., Ostermann, M., Buchenau, N., Oetzel, J., Schlosser, F., Meschede,
H., & Tröster, T. (2025). Energy efficiency improvement for decarbonization
in manufacturing industry: A review. Energy Conversion and Management,
338, Article 119763. https://doi.org/10.1016/j.enconman.2025.119763'
bibtex: '@article{Naumann_Ostermann_Buchenau_Oetzel_Schlosser_Meschede_Tröster_2025,
title={Energy efficiency improvement for decarbonization in manufacturing industry:
A review}, volume={338}, DOI={10.1016/j.enconman.2025.119763},
number={119763}, journal={Energy Conversion and Management}, publisher={Elsevier
BV}, author={Naumann, Marius and Ostermann, Moritz and Buchenau, Nadja and Oetzel,
Jannik and Schlosser, Florian and Meschede, Henning and Tröster, Thomas}, year={2025}
}'
chicago: 'Naumann, Marius, Moritz Ostermann, Nadja Buchenau, Jannik Oetzel, Florian
Schlosser, Henning Meschede, and Thomas Tröster. “Energy Efficiency Improvement
for Decarbonization in Manufacturing Industry: A Review.” Energy Conversion
and Management 338 (2025). https://doi.org/10.1016/j.enconman.2025.119763.'
ieee: 'M. Naumann et al., “Energy efficiency improvement for decarbonization
in manufacturing industry: A review,” Energy Conversion and Management,
vol. 338, Art. no. 119763, 2025, doi: 10.1016/j.enconman.2025.119763.'
mla: 'Naumann, Marius, et al. “Energy Efficiency Improvement for Decarbonization
in Manufacturing Industry: A Review.” Energy Conversion and Management,
vol. 338, 119763, Elsevier BV, 2025, doi:10.1016/j.enconman.2025.119763.'
short: M. Naumann, M. Ostermann, N. Buchenau, J. Oetzel, F. Schlosser, H. Meschede,
T. Tröster, Energy Conversion and Management 338 (2025).
date_created: 2025-05-31T15:23:52Z
date_updated: 2025-06-06T07:49:35Z
department:
- _id: '644'
- _id: '9'
- _id: '149'
- _id: '321'
doi: 10.1016/j.enconman.2025.119763
intvolume: ' 338'
language:
- iso: eng
publication: Energy Conversion and Management
publication_identifier:
issn:
- 0196-8904
publication_status: published
publisher: Elsevier BV
status: public
title: 'Energy efficiency improvement for decarbonization in manufacturing industry:
A review'
type: journal_article
user_id: '15952'
volume: 338
year: '2025'
...
---
_id: '60152'
alternative_title:
- ' Eine christliche Perspektive'
author:
- first_name: Oliver
full_name: Reis, Oliver
last_name: Reis
citation:
ama: 'Reis O. Kinder- und Jugendtheologie und Tradition. In: Kamcili-Yildiz N, ed.
Was hat das mit zu tun? Zugange zur Tradition in der islamischen Religionspädagogik.
Vol 3. Comparative Theology, Islam, and Societyal. Ge Gruyter; 2025:210. doi:10.1515/9783111674568'
apa: Reis, O. (2025). Kinder- und Jugendtheologie und Tradition. In N. Kamcili-Yildiz
(Ed.), Was hat das mit zu tun? Zugange zur Tradition in der islamischen Religionspädagogik
(Vol. 3, p. 210). Ge Gruyter. https://doi.org/10.1515/9783111674568
bibtex: '@inbook{Reis_2025, place={Berlin }, series={Comparative Theology, Islam,
and Societyal}, title={Kinder- und Jugendtheologie und Tradition.}, volume={3},
DOI={10.1515/9783111674568},
booktitle={Was hat das mit zu tun? Zugange zur Tradition in der islamischen Religionspädagogik},
publisher={Ge Gruyter}, author={Reis, Oliver}, editor={Kamcili-Yildiz, Naciye},
year={2025}, pages={210}, collection={Comparative Theology, Islam, and Societyal}
}'
chicago: 'Reis, Oliver. “Kinder- und Jugendtheologie und Tradition.” In Was hat
das mit zu tun? Zugange zur Tradition in der islamischen Religionspädagogik,
edited by Naciye Kamcili-Yildiz, 3:210. Comparative Theology, Islam, and Societyal.
Berlin : Ge Gruyter, 2025. https://doi.org/10.1515/9783111674568.'
ieee: 'O. Reis, “Kinder- und Jugendtheologie und Tradition.,” in Was hat das
mit zu tun? Zugange zur Tradition in der islamischen Religionspädagogik, vol.
3, N. Kamcili-Yildiz, Ed. Berlin : Ge Gruyter, 2025, p. 210.'
mla: Reis, Oliver. “Kinder- und Jugendtheologie und Tradition.” Was hat das mit
zu tun? Zugange zur Tradition in der islamischen Religionspädagogik, edited
by Naciye Kamcili-Yildiz, vol. 3, Ge Gruyter, 2025, p. 210, doi:10.1515/9783111674568.
short: 'O. Reis, in: N. Kamcili-Yildiz (Ed.), Was hat das mit zu tun? Zugange zur
Tradition in der islamischen Religionspädagogik, Ge Gruyter, Berlin , 2025, p.
210.'
date_created: 2025-06-08T14:32:14Z
date_updated: 2025-06-08T14:47:02Z
doi: 10.1515/9783111674568
editor:
- first_name: Naciye
full_name: Kamcili-Yildiz, Naciye
last_name: Kamcili-Yildiz
intvolume: ' 3'
language:
- iso: ger
page: '210'
place: 'Berlin '
publication: Was hat das mit zu tun? Zugange zur Tradition in der islamischen Religionspädagogik
publication_identifier:
isbn:
- 978-3-11-914941-9
publication_status: published
publisher: Ge Gruyter
related_material:
link:
- relation: confirmation
url: https://doi.org/10.1515/9783111674568
series_title: Comparative Theology, Islam, and Societyal
status: public
title: Kinder- und Jugendtheologie und Tradition.
type: book_chapter
user_id: '55567'
volume: 3
year: '2025'
...
---
_id: '59261'
author:
- first_name: Sebastian
full_name: Magerkohl, Sebastian
id: '28520'
last_name: Magerkohl
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
citation:
ama: 'Magerkohl S, Magyar B. The Role or Rule of the Development Methodology for
Additive Manufacturing. In: Lachmayer R, Oel M, Kaierle S, eds. Innovative
Produktentwicklung durch additive Fertigung. Springer Berlin Heidelberg; 2025.
doi:10.1007/978-3-662-69327-8'
apa: Magerkohl, S., & Magyar, B. (2025). The Role or Rule of the Development
Methodology for Additive Manufacturing. In R. Lachmayer, M. Oel, & S. Kaierle
(Eds.), Innovative Produktentwicklung durch additive Fertigung. Springer
Berlin Heidelberg. https://doi.org/10.1007/978-3-662-69327-8
bibtex: '@inbook{Magerkohl_Magyar_2025, place={Berlin, Heidelberg}, title={The Role
or Rule of the Development Methodology for Additive Manufacturing}, DOI={10.1007/978-3-662-69327-8},
booktitle={Innovative Produktentwicklung durch additive Fertigung}, publisher={Springer
Berlin Heidelberg}, author={Magerkohl, Sebastian and Magyar, Balázs}, editor={Lachmayer,
Roland and Oel, Marcus and Kaierle, Stefan}, year={2025} }'
chicago: 'Magerkohl, Sebastian, and Balázs Magyar. “The Role or Rule of the Development
Methodology for Additive Manufacturing.” In Innovative Produktentwicklung durch
additive Fertigung, edited by Roland Lachmayer, Marcus Oel, and Stefan Kaierle.
Berlin, Heidelberg: Springer Berlin Heidelberg, 2025. https://doi.org/10.1007/978-3-662-69327-8.'
ieee: 'S. Magerkohl and B. Magyar, “The Role or Rule of the Development Methodology
for Additive Manufacturing,” in Innovative Produktentwicklung durch additive
Fertigung, R. Lachmayer, M. Oel, and S. Kaierle, Eds. Berlin, Heidelberg:
Springer Berlin Heidelberg, 2025.'
mla: Magerkohl, Sebastian, and Balázs Magyar. “The Role or Rule of the Development
Methodology for Additive Manufacturing.” Innovative Produktentwicklung durch
additive Fertigung, edited by Roland Lachmayer et al., Springer Berlin Heidelberg,
2025, doi:10.1007/978-3-662-69327-8.
short: 'S. Magerkohl, B. Magyar, in: R. Lachmayer, M. Oel, S. Kaierle (Eds.), Innovative
Produktentwicklung durch additive Fertigung, Springer Berlin Heidelberg, Berlin,
Heidelberg, 2025.'
date_created: 2025-04-02T13:53:19Z
date_updated: 2026-01-14T11:58:39Z
department:
- _id: '146'
doi: 10.1007/978-3-662-69327-8
editor:
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
- first_name: Marcus
full_name: Oel, Marcus
last_name: Oel
- first_name: Stefan
full_name: Kaierle, Stefan
last_name: Kaierle
language:
- iso: ger
place: Berlin, Heidelberg
publication: Innovative Produktentwicklung durch additive Fertigung
publication_identifier:
isbn:
- '9783662693261'
- '9783662693278'
publication_status: published
publisher: Springer Berlin Heidelberg
quality_controlled: '1'
status: public
title: The Role or Rule of the Development Methodology for Additive Manufacturing
type: book_chapter
user_id: '97759'
year: '2025'
...
---
_id: '60017'
article_type: original
author:
- first_name: Alexander Marcus
full_name: Skolik, Alexander Marcus
id: '92908'
last_name: Skolik
orcid: 0009-0006-2519-1765
- first_name: Philipp
full_name: zur Heiden, Philipp
id: '64394'
last_name: zur Heiden
- first_name: Johannes Aurelius Tamino
full_name: Donner, Johannes Aurelius Tamino
id: '72054'
last_name: Donner
orcid: 0009-0007-4757-4393
- first_name: Jennifer
full_name: Priefer, Jennifer
id: '82872'
last_name: Priefer
citation:
ama: 'Skolik AM, zur Heiden P, Donner JAT, Priefer J. Igniting Knowledge Management
for Assistance Systems in Maintenance: A Method for Knowledge Gathering. ECIS
2025 Proceedings. 2.'
apa: 'Skolik, A. M., zur Heiden, P., Donner, J. A. T., & Priefer, J. (n.d.).
Igniting Knowledge Management for Assistance Systems in Maintenance: A Method
for Knowledge Gathering. ECIS 2025 Proceedings, 2.'
bibtex: '@article{Skolik_zur Heiden_Donner_Priefer, title={Igniting Knowledge Management
for Assistance Systems in Maintenance: A Method for Knowledge Gathering}, volume={2},
journal={ECIS 2025 Proceedings}, author={Skolik, Alexander Marcus and zur Heiden,
Philipp and Donner, Johannes Aurelius Tamino and Priefer, Jennifer} }'
chicago: 'Skolik, Alexander Marcus, Philipp zur Heiden, Johannes Aurelius Tamino
Donner, and Jennifer Priefer. “Igniting Knowledge Management for Assistance Systems
in Maintenance: A Method for Knowledge Gathering.” ECIS 2025 Proceedings
2 (n.d.).'
ieee: 'A. M. Skolik, P. zur Heiden, J. A. T. Donner, and J. Priefer, “Igniting Knowledge
Management for Assistance Systems in Maintenance: A Method for Knowledge Gathering,”
ECIS 2025 Proceedings, vol. 2.'
mla: 'Skolik, Alexander Marcus, et al. “Igniting Knowledge Management for Assistance
Systems in Maintenance: A Method for Knowledge Gathering.” ECIS 2025 Proceedings,
vol. 2.'
short: A.M. Skolik, P. zur Heiden, J.A.T. Donner, J. Priefer, ECIS 2025 Proceedings
2 (n.d.).
conference:
location: Amman, Jordan
name: Thirty-Third European Conference on Information Systems (ECIS 2025)
date_created: 2025-05-22T09:17:51Z
date_updated: 2026-01-29T15:27:30Z
ddc:
- '006'
department:
- _id: '876'
- _id: '321'
- _id: '526'
- _id: '534'
file:
- access_level: open_access
content_type: application/pdf
creator: askolik
date_created: 2026-01-15T15:21:39Z
date_updated: 2026-01-29T15:27:29Z
file_id: '63634'
file_name: Igniting Knowledge Management for Assistance Systems in Maintenance.pdf
file_size: 721701
relation: main_file
file_date_updated: 2026-01-29T15:27:29Z
has_accepted_license: '1'
intvolume: ' 2'
language:
- iso: eng
main_file_link:
- url: https://aisel.aisnet.org/ecis2025/ent_system/ent_system/2/
oa: '1'
publication: ECIS 2025 Proceedings
publication_status: accepted
quality_controlled: '1'
status: public
title: 'Igniting Knowledge Management for Assistance Systems in Maintenance: A Method
for Knowledge Gathering'
type: journal_article
user_id: '92908'
volume: 2
year: '2025'
...
---
_id: '63839'
author:
- first_name: Julian
full_name: Gilich, Julian
id: '44391'
last_name: Gilich
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Felix
full_name: Wiebicke, Felix
last_name: Wiebicke
- first_name: Ilja
full_name: Koch, Ilja
last_name: Koch
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
citation:
ama: 'Gilich J, Meschut G, Gröger B, Wiebicke F, Koch I, Gude M. Experimentelle
und numerische Analyse des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess. In: 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik.
; 2025.'
apa: 'Gilich, J., Meschut, G., Gröger, B., Wiebicke, F., Koch, I., & Gude, M.
(2025). Experimentelle und numerische Analyse des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess. 25. Kolloquium: Gemeinsame Forschung
in der Klebtechnik. 25. Kolloquium: Gemeinsame Forschung in der Klebtechnik,
Köln.'
bibtex: '@inproceedings{Gilich_Meschut_Gröger_Wiebicke_Koch_Gude_2025, title={Experimentelle
und numerische Analyse des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess}, booktitle={25. Kolloquium: Gemeinsame Forschung in der
Klebtechnik}, author={Gilich, Julian and Meschut, Gerson and Gröger, Benjamin
and Wiebicke, Felix and Koch, Ilja and Gude, Maik}, year={2025} }'
chicago: 'Gilich, Julian, Gerson Meschut, Benjamin Gröger, Felix Wiebicke, Ilja
Koch, and Maik Gude. “Experimentelle und numerische Analyse des Fließverhaltens
von hochviskosen Wärmeleitstoffen im Fertigungsprozess.” In 25. Kolloquium:
Gemeinsame Forschung in der Klebtechnik, 2025.'
ieee: 'J. Gilich, G. Meschut, B. Gröger, F. Wiebicke, I. Koch, and M. Gude, “Experimentelle
und numerische Analyse des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess,” presented at the 25. Kolloquium: Gemeinsame Forschung in
der Klebtechnik, Köln, 2025.'
mla: 'Gilich, Julian, et al. “Experimentelle und numerische Analyse des Fließverhaltens
von hochviskosen Wärmeleitstoffen im Fertigungsprozess.” 25. Kolloquium: Gemeinsame
Forschung in der Klebtechnik, 2025.'
short: 'J. Gilich, G. Meschut, B. Gröger, F. Wiebicke, I. Koch, M. Gude, in: 25.
Kolloquium: Gemeinsame Forschung in der Klebtechnik, 2025.'
conference:
end_date: 2025-02-19
location: Köln
name: '25. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
start_date: 2025-02-18
date_created: 2026-02-03T07:26:32Z
date_updated: 2026-02-03T07:26:45Z
department:
- _id: '157'
language:
- iso: ger
publication: '25. Kolloquium: Gemeinsame Forschung in der Klebtechnik'
status: public
title: Experimentelle und numerische Analyse des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess
type: conference_abstract
user_id: '44391'
year: '2025'
...
---
_id: '63857'
author:
- first_name: Anni-Yasmin
full_name: Turhan, Anni-Yasmin
id: '104470'
last_name: Turhan
citation:
ama: Turhan A-Y. Think Globally, Attend Locally. Künstliche Intell. 2025;39(4):271–272.
doi:10.1007/S13218-025-00894-9
apa: Turhan, A.-Y. (2025). Think Globally, Attend Locally. Künstliche Intell.,
39(4), 271–272. https://doi.org/10.1007/S13218-025-00894-9
bibtex: '@article{Turhan_2025, title={Think Globally, Attend Locally}, volume={39},
DOI={10.1007/S13218-025-00894-9},
number={4}, journal={Künstliche Intell.}, author={Turhan, Anni-Yasmin}, year={2025},
pages={271–272} }'
chicago: 'Turhan, Anni-Yasmin. “Think Globally, Attend Locally.” Künstliche Intell.
39, no. 4 (2025): 271–272. https://doi.org/10.1007/S13218-025-00894-9.'
ieee: 'A.-Y. Turhan, “Think Globally, Attend Locally,” Künstliche Intell.,
vol. 39, no. 4, pp. 271–272, 2025, doi: 10.1007/S13218-025-00894-9.'
mla: Turhan, Anni-Yasmin. “Think Globally, Attend Locally.” Künstliche Intell.,
vol. 39, no. 4, 2025, pp. 271–272, doi:10.1007/S13218-025-00894-9.
short: A.-Y. Turhan, Künstliche Intell. 39 (2025) 271–272.
date_created: 2026-02-04T07:01:02Z
date_updated: 2026-02-04T07:02:52Z
doi: 10.1007/S13218-025-00894-9
intvolume: ' 39'
issue: '4'
language:
- iso: eng
page: 271–272
publication: Künstliche Intell.
status: public
title: Think Globally, Attend Locally
type: journal_article
user_id: '117185'
volume: 39
year: '2025'
...
---
_id: '60834'
author:
- first_name: Manuel
full_name: Ott, Manuel
id: '44204'
last_name: Ott
- first_name: Philipp
full_name: Jung, Philipp
last_name: Jung
- first_name: Christian
full_name: Bödger, Christian
id: '93904'
last_name: Bödger
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
- first_name: Rainer
full_name: Koch, Rainer
last_name: Koch
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: 'Ott M, Jung P, Bödger C, Mozgova I, Koch R, Tröster T. Fused Deposition Modeling
and its Extension Through Metal-Filled Filaments as a Means of Self-Help for Individuals
with Physical Disabilities. In: Lachmayer R, Kaierle S, Oel M, eds. Innovative
Produktentwicklung Durch Additive Fertigung. ; 2025:117-127. doi:doi.org/10.1007/978-3-662-69327-8'
apa: Ott, M., Jung, P., Bödger, C., Mozgova, I., Koch, R., & Tröster, T. (2025).
Fused Deposition Modeling and its Extension Through Metal-Filled Filaments as
a Means of Self-Help for Individuals with Physical Disabilities. In R. Lachmayer,
S. Kaierle, & M. Oel (Eds.), Innovative Produktentwicklung durch additive
Fertigung (pp. 117–127). https://doi.org/doi.org/10.1007/978-3-662-69327-8
bibtex: '@inbook{Ott_Jung_Bödger_Mozgova_Koch_Tröster_2025, title={Fused Deposition
Modeling and its Extension Through Metal-Filled Filaments as a Means of Self-Help
for Individuals with Physical Disabilities}, DOI={doi.org/10.1007/978-3-662-69327-8},
booktitle={Innovative Produktentwicklung durch additive Fertigung}, author={Ott,
Manuel and Jung, Philipp and Bödger, Christian and Mozgova, Iryna and Koch, Rainer
and Tröster, Thomas}, editor={Lachmayer, Roland and Kaierle, Stefan and Oel, Marcus},
year={2025}, pages={117–127} }'
chicago: Ott, Manuel, Philipp Jung, Christian Bödger, Iryna Mozgova, Rainer Koch,
and Thomas Tröster. “Fused Deposition Modeling and Its Extension Through Metal-Filled
Filaments as a Means of Self-Help for Individuals with Physical Disabilities.”
In Innovative Produktentwicklung Durch Additive Fertigung, edited by Roland
Lachmayer, Stefan Kaierle, and Marcus Oel, 117–27, 2025. https://doi.org/doi.org/10.1007/978-3-662-69327-8.
ieee: M. Ott, P. Jung, C. Bödger, I. Mozgova, R. Koch, and T. Tröster, “Fused Deposition
Modeling and its Extension Through Metal-Filled Filaments as a Means of Self-Help
for Individuals with Physical Disabilities,” in Innovative Produktentwicklung
durch additive Fertigung, R. Lachmayer, S. Kaierle, and M. Oel, Eds. 2025,
pp. 117–127.
mla: Ott, Manuel, et al. “Fused Deposition Modeling and Its Extension Through Metal-Filled
Filaments as a Means of Self-Help for Individuals with Physical Disabilities.”
Innovative Produktentwicklung Durch Additive Fertigung, edited by Roland
Lachmayer et al., 2025, pp. 117–27, doi:doi.org/10.1007/978-3-662-69327-8.
short: 'M. Ott, P. Jung, C. Bödger, I. Mozgova, R. Koch, T. Tröster, in: R. Lachmayer,
S. Kaierle, M. Oel (Eds.), Innovative Produktentwicklung Durch Additive Fertigung,
2025, pp. 117–127.'
date_created: 2025-07-30T10:31:49Z
date_updated: 2026-02-06T10:46:35Z
department:
- _id: '741'
- _id: '144'
- _id: '149'
doi: doi.org/10.1007/978-3-662-69327-8
editor:
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
- first_name: Stefan
full_name: Kaierle, Stefan
last_name: Kaierle
- first_name: Marcus
full_name: Oel, Marcus
last_name: Oel
language:
- iso: eng
page: 117-127
publication: Innovative Produktentwicklung durch additive Fertigung
publication_identifier:
eisbn:
- 978-3-662-69327-8
publication_status: published
quality_controlled: '1'
status: public
title: Fused Deposition Modeling and its Extension Through Metal-Filled Filaments
as a Means of Self-Help for Individuals with Physical Disabilities
type: book_chapter
user_id: '95903'
year: '2025'
...
---
_id: '64099'
citation:
ama: Scheideler C, Meeks K, eds. 4th Symposium on Algorithmic Foundations of
Dynamic Networks.; 2025.
apa: Scheideler, C., & Meeks, K. (Eds.). (2025). 4th Symposium on Algorithmic
Foundations of Dynamic Networks.
bibtex: '@book{Scheideler_Meeks_2025, place={SAND 2025, Liverpool, UK, June 9-11,
2025. LIPIcs 330, Schloss Dagstuhl - Leibniz-Zentrum für Informatik}, title={4th
Symposium on Algorithmic Foundations of Dynamic Networks.}, year={2025} }'
chicago: Scheideler, Christian, and Kitty Meeks, eds. 4th Symposium on Algorithmic
Foundations of Dynamic Networks. SAND 2025, Liverpool, UK, June 9-11, 2025.
LIPIcs 330, Schloss Dagstuhl - Leibniz-Zentrum für Informatik, 2025.
ieee: C. Scheideler and K. Meeks, Eds., 4th Symposium on Algorithmic Foundations
of Dynamic Networks. SAND 2025, Liverpool, UK, June 9-11, 2025. LIPIcs 330,
Schloss Dagstuhl - Leibniz-Zentrum für Informatik, 2025.
mla: Scheideler, Christian, and Kitty Meeks, editors. 4th Symposium on Algorithmic
Foundations of Dynamic Networks. 2025.
short: C. Scheideler, K. Meeks, eds., 4th Symposium on Algorithmic Foundations of
Dynamic Networks., SAND 2025, Liverpool, UK, June 9-11, 2025. LIPIcs 330, Schloss
Dagstuhl - Leibniz-Zentrum für Informatik, 2025.
date_created: 2026-02-10T09:49:03Z
date_updated: 2026-02-11T09:11:09Z
department:
- _id: '34'
- _id: '7'
- _id: '79'
editor:
- first_name: Christian
full_name: Scheideler, Christian
id: '20792'
last_name: Scheideler
- first_name: Kitty
full_name: Meeks, Kitty
last_name: Meeks
language:
- iso: eng
place: SAND 2025, Liverpool, UK, June 9-11, 2025. LIPIcs 330, Schloss Dagstuhl - Leibniz-Zentrum
für Informatik
publication_identifier:
unknown:
- ISBN 978-3-95977-368-3
status: public
title: 4th Symposium on Algorithmic Foundations of Dynamic Networks.
type: book_editor
user_id: '15578'
year: '2025'
...
---
_id: '64173'
author:
- first_name: Marcel
full_name: Heitmann, Marcel
id: '38072'
last_name: Heitmann
orcid: 0009-0002-4181-8928
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
citation:
ama: Heitmann M, Meschut G. Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage .; 2025.
apa: Heitmann, M., & Meschut, G. (2025). Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage .
bibtex: '@book{Heitmann_Meschut_2025, title={Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage }, author={Heitmann, Marcel and Meschut, Gerson}, year={2025}
}'
chicago: Heitmann, Marcel, and Gerson Meschut. Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage , 2025.
ieee: M. Heitmann and G. Meschut, Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage . 2025.
mla: Heitmann, Marcel, and Gerson Meschut. Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage . 2025.
short: M. Heitmann, G. Meschut, Verfahrenserweiterung des Widerstandselementschweißens
für stahlintensive Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten
in Mittel- und Basislage , 2025.
date_created: 2026-02-16T12:22:03Z
date_updated: 2026-02-16T12:22:11Z
department:
- _id: '157'
language:
- iso: ger
publication_identifier:
isbn:
- 978-3-96780-210-8
status: public
title: 'Verfahrenserweiterung des Widerstandselementschweißens für stahlintensive
Dreiblech-Hybrid Mischverbindungen mit zwei höchstfesten Stahlgüten in Mittel- und
Basislage '
type: report
user_id: '38072'
year: '2025'
...
---
_id: '63437'
author:
- first_name: Johanna
full_name: Beckmann, Johanna
id: '82882'
last_name: Beckmann
- first_name: Andre
full_name: Bachmann, Andre
last_name: Bachmann
- first_name: Philipp
full_name: Brandes, Philipp
id: '70091'
last_name: Brandes
orcid: 0009-0005-9707-0885
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Elmar
full_name: Moritzer, Elmar
id: '20531'
last_name: Moritzer
citation:
ama: 'Beckmann J, Bachmann A, Brandes P, Marten T, Tröster T, Moritzer E. Validation
of Possible Applications of Flake Laminates for Recycling of PA6-CF Production
Scrap. In: 24th International Conference on Composite Materials (ICCM24).
The University of Delaware; 2025. doi:https://doi.org/10.5281/zenodo.18597865'
apa: Beckmann, J., Bachmann, A., Brandes, P., Marten, T., Tröster, T., & Moritzer,
E. (2025). Validation of Possible Applications of Flake Laminates for Recycling
of PA6-CF Production Scrap. 24th International Conference on Composite Materials
(ICCM24). https://doi.org/10.5281/zenodo.18597865
bibtex: '@inproceedings{Beckmann_Bachmann_Brandes_Marten_Tröster_Moritzer_2025,
title={Validation of Possible Applications of Flake Laminates for Recycling of
PA6-CF Production Scrap}, DOI={https://doi.org/10.5281/zenodo.18597865},
booktitle={24th International Conference on Composite Materials (ICCM24)}, publisher={The
University of Delaware}, author={Beckmann, Johanna and Bachmann, Andre and Brandes,
Philipp and Marten, Thorsten and Tröster, Thomas and Moritzer, Elmar}, year={2025}
}'
chicago: Beckmann, Johanna, Andre Bachmann, Philipp Brandes, Thorsten Marten, Thomas
Tröster, and Elmar Moritzer. “Validation of Possible Applications of Flake Laminates
for Recycling of PA6-CF Production Scrap.” In 24th International Conference
on Composite Materials (ICCM24). The University of Delaware, 2025. https://doi.org/10.5281/zenodo.18597865.
ieee: 'J. Beckmann, A. Bachmann, P. Brandes, T. Marten, T. Tröster, and E. Moritzer,
“Validation of Possible Applications of Flake Laminates for Recycling of PA6-CF
Production Scrap,” 2025, doi: https://doi.org/10.5281/zenodo.18597865.'
mla: Beckmann, Johanna, et al. “Validation of Possible Applications of Flake Laminates
for Recycling of PA6-CF Production Scrap.” 24th International Conference on
Composite Materials (ICCM24), The University of Delaware, 2025, doi:https://doi.org/10.5281/zenodo.18597865.
short: 'J. Beckmann, A. Bachmann, P. Brandes, T. Marten, T. Tröster, E. Moritzer,
in: 24th International Conference on Composite Materials (ICCM24), The University
of Delaware, 2025.'
date_created: 2026-01-05T08:42:54Z
date_updated: 2026-02-16T14:47:34Z
department:
- _id: '9'
- _id: '321'
- _id: '367'
doi: https://doi.org/10.5281/zenodo.18597865
keyword:
- Faser-Kunststoff-Verbunde (FKV)
- Faserverstärkte Kunststoffe (FVK)
- Organobleche
language:
- iso: eng
publication: 24th International Conference on Composite Materials (ICCM24)
publisher: The University of Delaware
status: public
title: Validation of Possible Applications of Flake Laminates for Recycling of PA6-CF
Production Scrap
type: conference
user_id: '82882'
year: '2025'
...
---
_id: '64188'
author:
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Julian
full_name: Gilich, Julian
id: '44391'
last_name: Gilich
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Ilja
full_name: Koch, Ilja
last_name: Koch
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Felix
full_name: Wiebicke, Felix
last_name: Wiebicke
citation:
ama: Meschut G, Gilich J, Gude M, Koch I, Gröger B, Wiebicke F. Experimentelle
Und Numerische Untersuchung Des Fließverhaltens von Hochviskosen Wärmeleitstoffen
Im Fertigungsprozess. Vol 391. Forschungsvereinigung Automobiltechnik e.V.;
2025.
apa: Meschut, G., Gilich, J., Gude, M., Koch, I., Gröger, B., & Wiebicke, F.
(2025). Experimentelle und numerische Untersuchung des Fließverhaltens von
hochviskosen Wärmeleitstoffen im Fertigungsprozess (Vol. 391). Forschungsvereinigung
Automobiltechnik e.V.
bibtex: '@book{Meschut_Gilich_Gude_Koch_Gröger_Wiebicke_2025, place={Berlin}, series={FAT-Schriftenreihe},
title={Experimentelle und numerische Untersuchung des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess}, volume={391}, publisher={Forschungsvereinigung
Automobiltechnik e.V.}, author={Meschut, Gerson and Gilich, Julian and Gude, Maik
and Koch, Ilja and Gröger, Benjamin and Wiebicke, Felix}, year={2025}, collection={FAT-Schriftenreihe}
}'
chicago: 'Meschut, Gerson, Julian Gilich, Maik Gude, Ilja Koch, Benjamin Gröger,
and Felix Wiebicke. Experimentelle Und Numerische Untersuchung Des Fließverhaltens
von Hochviskosen Wärmeleitstoffen Im Fertigungsprozess. Vol. 391. FAT-Schriftenreihe.
Berlin: Forschungsvereinigung Automobiltechnik e.V., 2025.'
ieee: 'G. Meschut, J. Gilich, M. Gude, I. Koch, B. Gröger, and F. Wiebicke, Experimentelle
und numerische Untersuchung des Fließverhaltens von hochviskosen Wärmeleitstoffen
im Fertigungsprozess, vol. 391. Berlin: Forschungsvereinigung Automobiltechnik
e.V., 2025.'
mla: Meschut, Gerson, et al. Experimentelle Und Numerische Untersuchung Des Fließverhaltens
von Hochviskosen Wärmeleitstoffen Im Fertigungsprozess. Forschungsvereinigung
Automobiltechnik e.V., 2025.
short: G. Meschut, J. Gilich, M. Gude, I. Koch, B. Gröger, F. Wiebicke, Experimentelle
Und Numerische Untersuchung Des Fließverhaltens von Hochviskosen Wärmeleitstoffen
Im Fertigungsprozess, Forschungsvereinigung Automobiltechnik e.V., Berlin, 2025.
date_created: 2026-02-17T13:18:21Z
date_updated: 2026-02-17T13:21:05Z
department:
- _id: '157'
intvolume: ' 391'
language:
- iso: eng
place: Berlin
publisher: Forschungsvereinigung Automobiltechnik e.V.
series_title: FAT-Schriftenreihe
status: public
title: Experimentelle und numerische Untersuchung des Fließverhaltens von hochviskosen
Wärmeleitstoffen im Fertigungsprozess
type: book
user_id: '44391'
volume: 391
year: '2025'
...
---
_id: '58163'
abstract:
- lang: eng
text: Fibre-reinforced polymers are increasingly used due to their high specific
strength, making them suitable for local sheet metal reinforcement. This allows
improved overall mechanical properties with reduced wall thickness of the sheet
metal part and, thus, lower weight of the components. One of the main focuses
of research into such hybrid structures is on the adhesive properties and the
respective failure behaviour of the interfaces. Generally, the failure behaviour
under the influence of mechanical loads can be divided into adhesive, cohesive
and mixed-mode failure. The correlation between observed failure behaviour and
adhesion properties of the hybrid composite materials is analysed in detail in
this work. The hybrid composite consists of an aluminium sheet of the alloy EN
AW‑6082 T6 and thermoset carbon fibre-reinforced plastic (CFRP) prepreg. The aluminium
sheet was laser pretreated before hybrid production to improve the adhesion properties.
The specimens studied were produced by the prepreg pressing process, in which
the components are cured and joined simultaneously. The influences of the thickness
of the CFRP part, the layup, the fibre orientation at the boundary layer, and
the laser pretreatment parameters on the properties of the hybrid joints were
investigated.
article_type: original
author:
- first_name: Shuang
full_name: Wu, Shuang
id: '48039'
last_name: Wu
orcid: 0000-0001-8645-9952
- first_name: Alexander
full_name: Delp, Alexander
last_name: Delp
- first_name: Jonathan
full_name: Freund, Jonathan
last_name: Freund
- first_name: Frank
full_name: Walther, Frank
last_name: Walther
- first_name: Jan
full_name: Haubrich, Jan
last_name: Haubrich
- first_name: Miriam
full_name: Löbbecke, Miriam
last_name: Löbbecke
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
citation:
ama: Wu S, Delp A, Freund J, et al. Correlation between interlaminar shear strength
of CFRP and joint strength of aluminium-CFRP hybrid joints. The Journal of
Adhesion. Published online 2025:1-26. doi:10.1080/00218464.2024.2439956
apa: Wu, S., Delp, A., Freund, J., Walther, F., Haubrich, J., Löbbecke, M., &
Tröster, T. (2025). Correlation between interlaminar shear strength of CFRP and
joint strength of aluminium-CFRP hybrid joints. The Journal of Adhesion,
1–26. https://doi.org/10.1080/00218464.2024.2439956
bibtex: '@article{Wu_Delp_Freund_Walther_Haubrich_Löbbecke_Tröster_2025, title={Correlation
between interlaminar shear strength of CFRP and joint strength of aluminium-CFRP
hybrid joints}, DOI={10.1080/00218464.2024.2439956},
journal={The Journal of Adhesion}, publisher={Informa UK Limited}, author={Wu,
Shuang and Delp, Alexander and Freund, Jonathan and Walther, Frank and Haubrich,
Jan and Löbbecke, Miriam and Tröster, Thomas}, year={2025}, pages={1–26} }'
chicago: Wu, Shuang, Alexander Delp, Jonathan Freund, Frank Walther, Jan Haubrich,
Miriam Löbbecke, and Thomas Tröster. “Correlation between Interlaminar Shear Strength
of CFRP and Joint Strength of Aluminium-CFRP Hybrid Joints.” The Journal of
Adhesion, 2025, 1–26. https://doi.org/10.1080/00218464.2024.2439956.
ieee: 'S. Wu et al., “Correlation between interlaminar shear strength of
CFRP and joint strength of aluminium-CFRP hybrid joints,” The Journal of Adhesion,
pp. 1–26, 2025, doi: 10.1080/00218464.2024.2439956.'
mla: Wu, Shuang, et al. “Correlation between Interlaminar Shear Strength of CFRP
and Joint Strength of Aluminium-CFRP Hybrid Joints.” The Journal of Adhesion,
Informa UK Limited, 2025, pp. 1–26, doi:10.1080/00218464.2024.2439956.
short: S. Wu, A. Delp, J. Freund, F. Walther, J. Haubrich, M. Löbbecke, T. Tröster,
The Journal of Adhesion (2025) 1–26.
date_created: 2025-01-13T08:16:46Z
date_updated: 2026-02-20T12:49:17Z
department:
- _id: '321'
- _id: '149'
- _id: '9'
doi: 10.1080/00218464.2024.2439956
keyword:
- Prepreg pressing process
- hybrid joints
- laser surface pretreatment
- intrinsic manufacturing
- CFRP
- aluminium
- materials engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://www.tandfonline.com/doi/full/10.1080/00218464.2024.2439956?src=
oa: '1'
page: 1-26
publication: The Journal of Adhesion
publication_identifier:
issn:
- 0021-8464
- 1545-5823
publication_status: published
publisher: Informa UK Limited
quality_controlled: '1'
status: public
title: Correlation between interlaminar shear strength of CFRP and joint strength
of aluminium-CFRP hybrid joints
type: journal_article
user_id: '48039'
year: '2025'
...
---
_id: '62727'
abstract:
- lang: eng
text: With the increasing amount of data in collaborative engineering research,
the need for effective and efficient data management is growing. This paper uses
a maturity-based process model to examine the implementation of research data
management (RDM) in engineering projects. A process model visualizes a research-supported
implementation of RDM and helps researchers evaluate their data management strategies
through maturity level assessment. For this approach, activities are assigned
to different maturity levels based on a maturity level characteristic providing
a differentiated view of the implementation of RDM. An example from an ongoing
project shows the application and support of the developed maturity-based process
model. The work emphasizes the importance of standardized and quality-assured
data management for the success of research projects and their contribution to
the scientific community
author:
- first_name: Max Leo
full_name: Wawer, Max Leo
last_name: Wawer
- first_name: Laura
full_name: Müller, Laura
id: '44605'
last_name: Müller
- first_name: Jaouhar Ben
full_name: Khaled, Jaouhar Ben
last_name: Khaled
- first_name: Timo
full_name: Stauß, Timo
last_name: Stauß
- first_name: Johanna
full_name: Wurst, Johanna
last_name: Wurst
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
- first_name: Roland
full_name: Lachmayer, Roland
last_name: Lachmayer
citation:
ama: Wawer ML, Müller L, Khaled JB, et al. A maturity based data management integration
in engineering research projects. Proceedings of the Design Society. 2025;5:169-178.
doi:10.1017/pds.2025.10031
apa: Wawer, M. L., Müller, L., Khaled, J. B., Stauß, T., Wurst, J., Mozgova, I.,
& Lachmayer, R. (2025). A maturity based data management integration in engineering
research projects. Proceedings of the Design Society, 5, 169–178.
https://doi.org/10.1017/pds.2025.10031
bibtex: '@article{Wawer_Müller_Khaled_Stauß_Wurst_Mozgova_Lachmayer_2025, title={A
maturity based data management integration in engineering research projects},
volume={5}, DOI={10.1017/pds.2025.10031},
journal={Proceedings of the Design Society}, publisher={Cambridge University Press
(CUP)}, author={Wawer, Max Leo and Müller, Laura and Khaled, Jaouhar Ben and Stauß,
Timo and Wurst, Johanna and Mozgova, Iryna and Lachmayer, Roland}, year={2025},
pages={169–178} }'
chicago: 'Wawer, Max Leo, Laura Müller, Jaouhar Ben Khaled, Timo Stauß, Johanna
Wurst, Iryna Mozgova, and Roland Lachmayer. “A Maturity Based Data Management
Integration in Engineering Research Projects.” Proceedings of the Design Society
5 (2025): 169–78. https://doi.org/10.1017/pds.2025.10031.'
ieee: 'M. L. Wawer et al., “A maturity based data management integration
in engineering research projects,” Proceedings of the Design Society, vol.
5, pp. 169–178, 2025, doi: 10.1017/pds.2025.10031.'
mla: Wawer, Max Leo, et al. “A Maturity Based Data Management Integration in Engineering
Research Projects.” Proceedings of the Design Society, vol. 5, Cambridge
University Press (CUP), 2025, pp. 169–78, doi:10.1017/pds.2025.10031.
short: M.L. Wawer, L. Müller, J.B. Khaled, T. Stauß, J. Wurst, I. Mozgova, R. Lachmayer,
Proceedings of the Design Society 5 (2025) 169–178.
date_created: 2025-12-01T14:02:52Z
date_updated: 2026-02-20T13:00:47Z
department:
- _id: '741'
doi: 10.1017/pds.2025.10031
intvolume: ' 5'
language:
- iso: eng
page: 169-178
publication: Proceedings of the Design Society
publication_identifier:
issn:
- 2732-527X
publication_status: published
publisher: Cambridge University Press (CUP)
quality_controlled: '1'
status: public
title: A maturity based data management integration in engineering research projects
type: journal_article
user_id: '44605'
volume: 5
year: '2025'
...
---
_id: '62728'
author:
- first_name: Laura
full_name: Müller, Laura
id: '44605'
last_name: Müller
- first_name: Marc
full_name: Hinterthaner, Marc
last_name: Hinterthaner
- first_name: Eduard
full_name: Ortlieb, Eduard
last_name: Ortlieb
- first_name: Norman
full_name: Mohnfeld, Norman
last_name: Mohnfeld
- first_name: Andreas Maximilian
full_name: Schultz, Andreas Maximilian
id: '40599'
last_name: Schultz
- first_name: Johanna
full_name: Uhe, Johanna
last_name: Uhe
- first_name: Oliver
full_name: Koepler, Oliver
last_name: Koepler
- first_name: Iryna
full_name: Mozgova, Iryna
id: '95903'
last_name: Mozgova
citation:
ama: 'Müller L, Hinterthaner M, Ortlieb E, et al. Getting Things Done: How to Make
Simulation Data FAIR and Ready to Reuse. In: IFIP Advances in Information and
Communication Technology. Springer Nature Switzerland; 2025:140-150. doi:10.1007/978-3-032-09704-0_14'
apa: 'Müller, L., Hinterthaner, M., Ortlieb, E., Mohnfeld, N., Schultz, A. M., Uhe,
J., Koepler, O., & Mozgova, I. (2025). Getting Things Done: How to Make Simulation
Data FAIR and Ready to Reuse. IFIP Advances in Information and Communication
Technology, 140–150. https://doi.org/10.1007/978-3-032-09704-0_14'
bibtex: '@inproceedings{Müller_Hinterthaner_Ortlieb_Mohnfeld_Schultz_Uhe_Koepler_Mozgova_2025,
place={Cham}, title={Getting Things Done: How to Make Simulation Data FAIR and
Ready to Reuse}, DOI={10.1007/978-3-032-09704-0_14},
booktitle={IFIP Advances in Information and Communication Technology}, publisher={Springer
Nature Switzerland}, author={Müller, Laura and Hinterthaner, Marc and Ortlieb,
Eduard and Mohnfeld, Norman and Schultz, Andreas Maximilian and Uhe, Johanna and
Koepler, Oliver and Mozgova, Iryna}, year={2025}, pages={140–150} }'
chicago: 'Müller, Laura, Marc Hinterthaner, Eduard Ortlieb, Norman Mohnfeld, Andreas
Maximilian Schultz, Johanna Uhe, Oliver Koepler, and Iryna Mozgova. “Getting Things
Done: How to Make Simulation Data FAIR and Ready to Reuse.” In IFIP Advances
in Information and Communication Technology, 140–50. Cham: Springer Nature
Switzerland, 2025. https://doi.org/10.1007/978-3-032-09704-0_14.'
ieee: 'L. Müller et al., “Getting Things Done: How to Make Simulation Data
FAIR and Ready to Reuse,” in IFIP Advances in Information and Communication
Technology, 2025, pp. 140–150, doi: 10.1007/978-3-032-09704-0_14.'
mla: 'Müller, Laura, et al. “Getting Things Done: How to Make Simulation Data FAIR
and Ready to Reuse.” IFIP Advances in Information and Communication Technology,
Springer Nature Switzerland, 2025, pp. 140–50, doi:10.1007/978-3-032-09704-0_14.'
short: 'L. Müller, M. Hinterthaner, E. Ortlieb, N. Mohnfeld, A.M. Schultz, J. Uhe,
O. Koepler, I. Mozgova, in: IFIP Advances in Information and Communication Technology,
Springer Nature Switzerland, Cham, 2025, pp. 140–150.'
date_created: 2025-12-01T14:12:55Z
date_updated: 2026-02-20T13:01:07Z
department:
- _id: '741'
doi: 10.1007/978-3-032-09704-0_14
language:
- iso: eng
page: 140-150
place: Cham
publication: IFIP Advances in Information and Communication Technology
publication_identifier:
isbn:
- '9783032097033'
- '9783032097040'
issn:
- 1868-4238
- 1868-422X
publication_status: published
publisher: Springer Nature Switzerland
quality_controlled: '1'
status: public
title: 'Getting Things Done: How to Make Simulation Data FAIR and Ready to Reuse'
type: conference
user_id: '44605'
year: '2025'
...