---
_id: '52612'
abstract:
- lang: eng
text: During resistance spot welding of zinc-coated advanced high-strength
steels (AHSSs) for automotive production, liquid metal embrittlement (LME) cracking
may occur in the event of a combination of various unfavorable influences. In
this study, the interactions of different welding current levels and weld times
on the tendency for LME cracking in third-generation AHSSs were investigated.
LME manifested itself as high-penetration cracks around the circumference of the
spot welds for welding currents closely below the expulsion limit. At the same
time, the observed tendency for LME cracking showed no direct correlation with
the overall heat input of the investigated welding processes. To identify a reliable
indicator of the tendency for LME cracking, the local strain rate at the origin
of the observed cracks was analyzed over the course of the welding process via
finite element simulation. While the local strain rate showed a good correlation
with the process-specific LME cracking tendency, it was difficult to interpret
due to its discontinuous course. Therefore, based on the experimental measurement
of electrode displacement during welding, electrode indentation velocity was proposed
as a descriptive indicator for quantifying cracking tendency.
author:
- first_name: Christoph
full_name: Böhne, Christoph
id: '22483'
last_name: Böhne
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: MAX
full_name: BIEGLER, MAX
last_name: BIEGLER
- first_name: MICHAEL
full_name: RETHMEIER, MICHAEL
last_name: RETHMEIER
citation:
ama: Böhne C, Meschut G, BIEGLER M, RETHMEIER M. The Influence of Electrode Indentation
Rate on LME Formation during RSW. Welding Journal. 2022;101(7):197-207.
doi:10.29391/2022.101.015
apa: Böhne, C., Meschut, G., BIEGLER, M., & RETHMEIER, M. (2022). The Influence
of Electrode Indentation Rate on LME Formation during RSW. Welding Journal,
101(7), 197–207. https://doi.org/10.29391/2022.101.015
bibtex: '@article{Böhne_Meschut_BIEGLER_RETHMEIER_2022, title={The Influence of
Electrode Indentation Rate on LME Formation during RSW}, volume={101}, DOI={10.29391/2022.101.015}, number={7},
journal={Welding Journal}, publisher={American Welding Society}, author={Böhne,
Christoph and Meschut, Gerson and BIEGLER, MAX and RETHMEIER, MICHAEL}, year={2022},
pages={197–207} }'
chicago: 'Böhne, Christoph, Gerson Meschut, MAX BIEGLER, and MICHAEL RETHMEIER.
“The Influence of Electrode Indentation Rate on LME Formation during RSW.” Welding
Journal 101, no. 7 (2022): 197–207. https://doi.org/10.29391/2022.101.015.'
ieee: 'C. Böhne, G. Meschut, M. BIEGLER, and M. RETHMEIER, “The Influence of Electrode
Indentation Rate on LME Formation during RSW,” Welding Journal, vol. 101,
no. 7, pp. 197–207, 2022, doi: 10.29391/2022.101.015.'
mla: Böhne, Christoph, et al. “The Influence of Electrode Indentation Rate on LME
Formation during RSW.” Welding Journal, vol. 101, no. 7, American Welding
Society, 2022, pp. 197–207, doi:10.29391/2022.101.015.
short: C. Böhne, G. Meschut, M. BIEGLER, M. RETHMEIER, Welding Journal 101 (2022)
197–207.
date_created: 2024-03-18T11:51:57Z
date_updated: 2025-08-07T09:29:30Z
department:
- _id: '157'
doi: 10.29391/2022.101.015
intvolume: ' 101'
issue: '7'
keyword:
- Metals and Alloys
- Mechanical Engineering
- Mechanics of Materials
language:
- iso: eng
page: 197-207
popular_science: '1'
publication: Welding Journal
publication_identifier:
issn:
- 0043-2296
- 2689-0445
publication_status: published
publisher: American Welding Society
quality_controlled: '1'
status: public
title: The Influence of Electrode Indentation Rate on LME Formation during RSW
type: journal_article
user_id: '60398'
volume: 101
year: '2022'
...
---
_id: '32875'
author:
- first_name: Moritz
full_name: Ostermann, Moritz
id: '44763'
last_name: Ostermann
orcid: https://orcid.org/0000-0003-1146-0443
- first_name: Jonathan
full_name: Behm, Jonathan
id: '50525'
last_name: Behm
- first_name: Thorsten
full_name: Marten, Thorsten
id: '338'
last_name: Marten
orcid: 0009-0001-6433-7839
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Johannes
full_name: Weyer, Johannes
last_name: Weyer
- first_name: Kay
full_name: Cepera, Kay
last_name: Cepera
- first_name: Fabian
full_name: Adelt, Fabian
last_name: Adelt
citation:
ama: 'Ostermann M, Behm J, Marten T, et al. Individualisierung des ÖPNV - Integration
technischer und sozialer Dimensionen nachhaltiger Mobilität. In: 14. Wissenschaftsforum
Mobilität. ; 2022.'
apa: Ostermann, M., Behm, J., Marten, T., Tröster, T., Weyer, J., Cepera, K., &
Adelt, F. (2022). Individualisierung des ÖPNV - Integration technischer und sozialer
Dimensionen nachhaltiger Mobilität. 14. Wissenschaftsforum Mobilität. 14.
Wissenschaftsforum Mobilität, Duisburg.
bibtex: '@inproceedings{Ostermann_Behm_Marten_Tröster_Weyer_Cepera_Adelt_2022, place={Duisburg,
Germany}, title={Individualisierung des ÖPNV - Integration technischer und sozialer
Dimensionen nachhaltiger Mobilität}, booktitle={14. Wissenschaftsforum Mobilität},
author={Ostermann, Moritz and Behm, Jonathan and Marten, Thorsten and Tröster,
Thomas and Weyer, Johannes and Cepera, Kay and Adelt, Fabian}, year={2022} }'
chicago: Ostermann, Moritz, Jonathan Behm, Thorsten Marten, Thomas Tröster, Johannes
Weyer, Kay Cepera, and Fabian Adelt. “Individualisierung Des ÖPNV - Integration
Technischer Und Sozialer Dimensionen Nachhaltiger Mobilität.” In 14. Wissenschaftsforum
Mobilität. Duisburg, Germany, 2022.
ieee: M. Ostermann et al., “Individualisierung des ÖPNV - Integration technischer
und sozialer Dimensionen nachhaltiger Mobilität,” presented at the 14. Wissenschaftsforum
Mobilität, Duisburg, 2022.
mla: Ostermann, Moritz, et al. “Individualisierung Des ÖPNV - Integration Technischer
Und Sozialer Dimensionen Nachhaltiger Mobilität.” 14. Wissenschaftsforum Mobilität,
2022.
short: 'M. Ostermann, J. Behm, T. Marten, T. Tröster, J. Weyer, K. Cepera, F. Adelt,
in: 14. Wissenschaftsforum Mobilität, Duisburg, Germany, 2022.'
conference:
end_date: 23.06.2022
location: Duisburg
name: 14. Wissenschaftsforum Mobilität
start_date: 23.06.2022
date_created: 2022-08-17T11:32:21Z
date_updated: 2025-08-24T11:57:17Z
department:
- _id: '321'
- _id: '149'
language:
- iso: eng
place: Duisburg, Germany
publication: 14. Wissenschaftsforum Mobilität
status: public
title: Individualisierung des ÖPNV - Integration technischer und sozialer Dimensionen
nachhaltiger Mobilität
type: conference_abstract
user_id: '44763'
year: '2022'
...
---
_id: '52428'
author:
- first_name: Alexander
full_name: Schlüter, Alexander
id: '103302'
last_name: Schlüter
orcid: 0000-0002-2569-1624
citation:
ama: Schlüter A. 2050 - The Future Podcast, Folge Smarte Energien für die Zukunft.
Marcus Nettelbeck; 2022.
apa: Schlüter, A. (2022). 2050 - The Future Podcast, Folge Smarte Energien für
die Zukunft. Marcus Nettelbeck.
bibtex: '@book{Schlüter_2022, title={2050 - The Future Podcast, Folge Smarte Energien
für die Zukunft}, publisher={Marcus Nettelbeck}, author={Schlüter, Alexander},
year={2022} }'
chicago: Schlüter, Alexander. 2050 - The Future Podcast, Folge Smarte Energien
für die Zukunft. Marcus Nettelbeck, 2022.
ieee: A. Schlüter, 2050 - The Future Podcast, Folge Smarte Energien für die Zukunft.
Marcus Nettelbeck, 2022.
mla: Schlüter, Alexander. 2050 - The Future Podcast, Folge Smarte Energien für
die Zukunft. Marcus Nettelbeck, 2022.
short: A. Schlüter, 2050 - The Future Podcast, Folge Smarte Energien für die Zukunft,
Marcus Nettelbeck, 2022.
date_created: 2024-03-10T08:08:57Z
date_updated: 2026-03-10T12:36:50Z
department:
- _id: '9'
- _id: '876'
- _id: '321'
extern: '1'
language:
- iso: ger
publisher: Marcus Nettelbeck
status: public
title: 2050 - The Future Podcast, Folge Smarte Energien für die Zukunft
type: misc
user_id: '14972'
year: '2022'
...
---
_id: '26389'
abstract:
- lang: eng
text: Within this work, we investigate how data-driven numerical approximation methods
of the Koopman operator can be used in practical control engineering applications.
We refer to the method Extended Dynamic Mode Decomposition (EDMD), which approximates
a nonlinear dynamical system as a linear model. This makes the method ideal for
control engineering applications, because a linear system description is often
assumed for this purpose. Using academic examples, we simulatively analyze the
prediction performance of the learned EDMD models and show how relevant system
properties like stability, controllability, and observability are reflected by
the EDMD model, which is a critical requirement for a successful control design
process. Subsequently, we present our experimental results on a mechatronic test
bench and evaluate the applicability to the control engineering design process.
As a result, the investigated methods are suitable as a low-effort alternative
for the design steps of model building and adaptation in the classical model-based
controller design method.
author:
- first_name: Annika
full_name: Junker, Annika
id: '41470'
last_name: Junker
orcid: 0009-0002-6475-2503
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Junker A, Timmermann J, Trächtler A. Data-Driven Models for Control Engineering
Applications Using the Koopman Operator. In: 2022 3rd International Conference
on Artificial Intelligence, Robotics and Control (AIRC 2022). ; 2022:1-9.
doi:10.1109/AIRC56195.2022.9836980'
apa: Junker, A., Timmermann, J., & Trächtler, A. (2022). Data-Driven Models
for Control Engineering Applications Using the Koopman Operator. 2022 3rd International
Conference on Artificial Intelligence, Robotics and Control (AIRC 2022), 1–9.
https://doi.org/10.1109/AIRC56195.2022.9836980
bibtex: '@inproceedings{Junker_Timmermann_Trächtler_2022, title={Data-Driven Models
for Control Engineering Applications Using the Koopman Operator}, DOI={10.1109/AIRC56195.2022.9836980},
booktitle={2022 3rd International Conference on Artificial Intelligence, Robotics
and Control (AIRC 2022)}, author={Junker, Annika and Timmermann, Julia and Trächtler,
Ansgar}, year={2022}, pages={1–9} }'
chicago: Junker, Annika, Julia Timmermann, and Ansgar Trächtler. “Data-Driven Models
for Control Engineering Applications Using the Koopman Operator.” In 2022 3rd
International Conference on Artificial Intelligence, Robotics and Control (AIRC
2022), 1–9, 2022. https://doi.org/10.1109/AIRC56195.2022.9836980.
ieee: 'A. Junker, J. Timmermann, and A. Trächtler, “Data-Driven Models for Control
Engineering Applications Using the Koopman Operator,” in 2022 3rd International
Conference on Artificial Intelligence, Robotics and Control (AIRC 2022), Cairo,
Egypt, 2022, pp. 1–9, doi: 10.1109/AIRC56195.2022.9836980.'
mla: Junker, Annika, et al. “Data-Driven Models for Control Engineering Applications
Using the Koopman Operator.” 2022 3rd International Conference on Artificial
Intelligence, Robotics and Control (AIRC 2022), 2022, pp. 1–9, doi:10.1109/AIRC56195.2022.9836980.
short: 'A. Junker, J. Timmermann, A. Trächtler, in: 2022 3rd International Conference
on Artificial Intelligence, Robotics and Control (AIRC 2022), 2022, pp. 1–9.'
conference:
end_date: 2022-05-12
location: Cairo, Egypt
name: 2022 3rd International Conference on Artificial Intelligence, Robotics and
Control (AIRC 2022)
start_date: 2022-05-10
date_created: 2021-10-18T05:59:07Z
date_updated: 2026-04-01T05:51:06Z
department:
- _id: '153'
- _id: '880'
doi: 10.1109/AIRC56195.2022.9836980
keyword:
- Koopman Operator
- Nonlinear Control
- Extended Dynamic Mode Decomposition
- Hybrid Modelling
language:
- iso: eng
main_file_link:
- url: https://ieeexplore.ieee.org/document/9836980
page: 1-9
project:
- _id: '690'
name: 'DART: Datengetriebene Methoden in der Regelungstechnik'
publication: 2022 3rd International Conference on Artificial Intelligence, Robotics
and Control (AIRC 2022)
publication_identifier:
isbn:
- 978-1-6654-5946-4
publication_status: published
quality_controlled: '1'
status: public
title: Data-Driven Models for Control Engineering Applications Using the Koopman Operator
type: conference
user_id: '41470'
year: '2022'
...
---
_id: '34011'
author:
- first_name: Annika
full_name: Junker, Annika
id: '41470'
last_name: Junker
orcid: 0009-0002-6475-2503
- first_name: Niklas
full_name: Fittkau, Niklas
id: '69890'
last_name: Fittkau
orcid: 0009-0007-1281-4465
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: 'Junker A, Fittkau N, Timmermann J, Trächtler A. Autonomes Putten mittels datengetriebener
und physikbasierter Methoden. In: Proceedings - 32. Workshop Computational
Intelligence: Berlin, 1. - 2. Dezember 2022. ; 2022:119-124. doi:10.5445/KSP/1000151141'
apa: 'Junker, A., Fittkau, N., Timmermann, J., & Trächtler, A. (2022). Autonomes
Putten mittels datengetriebener und physikbasierter Methoden. Proceedings -
32. Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022, 119–124.
https://doi.org/10.5445/KSP/1000151141'
bibtex: '@inproceedings{Junker_Fittkau_Timmermann_Trächtler_2022, title={Autonomes
Putten mittels datengetriebener und physikbasierter Methoden}, DOI={10.5445/KSP/1000151141},
booktitle={Proceedings - 32. Workshop Computational Intelligence: Berlin, 1. -
2. Dezember 2022}, author={Junker, Annika and Fittkau, Niklas and Timmermann,
Julia and Trächtler, Ansgar}, year={2022}, pages={119–124} }'
chicago: 'Junker, Annika, Niklas Fittkau, Julia Timmermann, and Ansgar Trächtler.
“Autonomes Putten Mittels Datengetriebener Und Physikbasierter Methoden.” In Proceedings
- 32. Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022,
119–24, 2022. https://doi.org/10.5445/KSP/1000151141.'
ieee: 'A. Junker, N. Fittkau, J. Timmermann, and A. Trächtler, “Autonomes Putten
mittels datengetriebener und physikbasierter Methoden,” in Proceedings - 32.
Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022, Berlin,
Germany, 2022, pp. 119–124, doi: 10.5445/KSP/1000151141.'
mla: 'Junker, Annika, et al. “Autonomes Putten Mittels Datengetriebener Und Physikbasierter
Methoden.” Proceedings - 32. Workshop Computational Intelligence: Berlin, 1.
- 2. Dezember 2022, 2022, pp. 119–24, doi:10.5445/KSP/1000151141.'
short: 'A. Junker, N. Fittkau, J. Timmermann, A. Trächtler, in: Proceedings - 32.
Workshop Computational Intelligence: Berlin, 1. - 2. Dezember 2022, 2022, pp.
119–124.'
conference:
end_date: 2022-12-02
location: Berlin, Germany
name: 32. Workshop Computational Intelligence
start_date: 2022-12-01
date_created: 2022-11-04T10:08:39Z
date_updated: 2026-04-01T05:59:13Z
department:
- _id: '153'
- _id: '880'
doi: 10.5445/KSP/1000151141
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://publikationen.bibliothek.kit.edu/1000151141
oa: '1'
page: 119-124
project:
- _id: '690'
name: 'DART: Datengetriebene Methoden in der Regelungstechnik'
publication: 'Proceedings - 32. Workshop Computational Intelligence: Berlin, 1. -
2. Dezember 2022'
quality_controlled: '1'
status: public
title: Autonomes Putten mittels datengetriebener und physikbasierter Methoden
type: conference
user_id: '41470'
year: '2022'
...
---
_id: '50071'
author:
- first_name: Annika
full_name: Junker, Annika
id: '41470'
last_name: Junker
orcid: 0009-0002-6475-2503
- first_name: Julia
full_name: Timmermann, Julia
id: '15402'
last_name: Timmermann
- first_name: Ansgar
full_name: Trächtler, Ansgar
id: '552'
last_name: Trächtler
citation:
ama: Junker A, Timmermann J, Trächtler A. Learning Data-Driven PCHD Models for Control
Engineering Applications*. IFAC-PapersOnLine. 2022;55(12):389-394. doi:10.1016/j.ifacol.2022.07.343
apa: Junker, A., Timmermann, J., & Trächtler, A. (2022). Learning Data-Driven
PCHD Models for Control Engineering Applications*. IFAC-PapersOnLine, 55(12),
389–394. https://doi.org/10.1016/j.ifacol.2022.07.343
bibtex: '@article{Junker_Timmermann_Trächtler_2022, title={Learning Data-Driven
PCHD Models for Control Engineering Applications*}, volume={55}, DOI={10.1016/j.ifacol.2022.07.343},
number={12}, journal={IFAC-PapersOnLine}, publisher={Elsevier BV}, author={Junker,
Annika and Timmermann, Julia and Trächtler, Ansgar}, year={2022}, pages={389–394}
}'
chicago: 'Junker, Annika, Julia Timmermann, and Ansgar Trächtler. “Learning Data-Driven
PCHD Models for Control Engineering Applications*.” IFAC-PapersOnLine 55,
no. 12 (2022): 389–94. https://doi.org/10.1016/j.ifacol.2022.07.343.'
ieee: 'A. Junker, J. Timmermann, and A. Trächtler, “Learning Data-Driven PCHD Models
for Control Engineering Applications*,” IFAC-PapersOnLine, vol. 55, no.
12, pp. 389–394, 2022, doi: 10.1016/j.ifacol.2022.07.343.'
mla: Junker, Annika, et al. “Learning Data-Driven PCHD Models for Control Engineering
Applications*.” IFAC-PapersOnLine, vol. 55, no. 12, Elsevier BV, 2022,
pp. 389–94, doi:10.1016/j.ifacol.2022.07.343.
short: A. Junker, J. Timmermann, A. Trächtler, IFAC-PapersOnLine 55 (2022) 389–394.
date_created: 2023-12-25T11:59:49Z
date_updated: 2026-04-01T06:15:18Z
department:
- _id: '153'
- _id: '880'
doi: 10.1016/j.ifacol.2022.07.343
intvolume: ' 55'
issue: '12'
keyword:
- Control and Systems Engineering
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://doi.org/10.1016/j.ifacol.2022.07.343
oa: '1'
page: 389-394
project:
- _id: '690'
name: 'DART: Datengetriebene Methoden in der Regelungstechnik'
publication: IFAC-PapersOnLine
publication_identifier:
issn:
- 2405-8963
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Learning Data-Driven PCHD Models for Control Engineering Applications*
type: journal_article
user_id: '41470'
volume: 55
year: '2022'
...
---
_id: '33914'
abstract:
- lang: eng
text: Workshops on business model generation lead to collaborative work phases and
discussions on business models. Therefore, tools such as the Business Model Canvas
are used, typically filled with sticky notes. Generated content needs to be digitized
in a time-consuming manual follow-up as part of the documentation and basis for
a further use of the results in the company. In addition, there are challenges,
such as decentralized work and digital workshop formats. Augmented Reality offers
a way to reduce the digitization effort and enables decentralized work. In this
research, the potentials of the use of AR technology in workshops on business
model generation is investigated. Therefore, functions are implemented and evaluated
in a demonstrator that reduces digitization effort and enable distributed work.
author:
- first_name: Iris
full_name: Gräßler, Iris
id: '47565'
last_name: Gräßler
orcid: 0000-0001-5765-971X
- first_name: Benedikt
full_name: Grewe, Benedikt
id: '52359'
last_name: Grewe
- first_name: Hendrik
full_name: Kramer, Hendrik
last_name: Kramer
- first_name: Jens
full_name: Pottebaum, Jens
id: '405'
last_name: Pottebaum
orcid: http://orcid.org/0000-0001-8778-2989
citation:
ama: 'Gräßler I, Grewe B, Kramer H, Pottebaum J. Supporting Business Model Generation
with Augmented Reality. In: LUT Scientific and Expertise Publications.
; 2022.'
apa: Gräßler, I., Grewe, B., Kramer, H., & Pottebaum, J. (2022). Supporting
Business Model Generation with Augmented Reality. LUT Scientific and Expertise
Publications. 33. ISPIM Innovation Conference “Innovating in a Digital World,”
Copenhagen.
bibtex: '@inproceedings{Gräßler_Grewe_Kramer_Pottebaum_2022, place={Manchester},
title={Supporting Business Model Generation with Augmented Reality}, booktitle={LUT
Scientific and Expertise Publications}, author={Gräßler, Iris and Grewe, Benedikt
and Kramer, Hendrik and Pottebaum, Jens}, year={2022} }'
chicago: Gräßler, Iris, Benedikt Grewe, Hendrik Kramer, and Jens Pottebaum. “Supporting
Business Model Generation with Augmented Reality.” In LUT Scientific and Expertise
Publications. Manchester, 2022.
ieee: I. Gräßler, B. Grewe, H. Kramer, and J. Pottebaum, “Supporting Business Model
Generation with Augmented Reality,” presented at the 33. ISPIM Innovation Conference
“Innovating in a Digital World,” Copenhagen, 2022.
mla: Gräßler, Iris, et al. “Supporting Business Model Generation with Augmented
Reality.” LUT Scientific and Expertise Publications, 2022.
short: 'I. Gräßler, B. Grewe, H. Kramer, J. Pottebaum, in: LUT Scientific and Expertise
Publications, Manchester, 2022.'
conference:
end_date: 2022-06-08
location: Copenhagen
name: 33. ISPIM Innovation Conference "Innovating in a Digital World"
start_date: 2022-06-05
date_created: 2022-10-27T13:20:22Z
date_updated: 2026-04-13T07:59:12Z
ddc:
- '620'
department:
- _id: '152'
has_accepted_license: '1'
keyword:
- business model generation
- augmented reality
- workshop
- collaborative work
- digitization
- AR-supported workshop concept
- immersive technologies
- decentralized work
- business model canvas
language:
- iso: eng
place: Manchester
publication: LUT Scientific and Expertise Publications
publication_identifier:
unknown:
- 978-952-335-694-8
publication_status: published
quality_controlled: '1'
status: public
title: Supporting Business Model Generation with Augmented Reality
type: conference
user_id: '5905'
year: '2022'
...
---
_id: '50089'
author:
- first_name: Karina
full_name: Pauls, Karina
id: '78235'
last_name: Pauls
citation:
ama: 'Pauls K. Skulptur/Plastik. In: Bering K, Niehoff R, Pauls K, eds. Lexikon
der Kunstpädagogik. Vol 5954. 2nd ed. utb. ATHENA/wbv; 2022:481-485.'
apa: Pauls, K. (2022). Skulptur/Plastik. In K. Bering, R. Niehoff, & K. Pauls
(Eds.), Lexikon der Kunstpädagogik (2nd ed., Vol. 5954, pp. 481–485). ATHENA/wbv.
bibtex: '@inbook{Pauls_2022, place={Bielefeld}, edition={2}, series={utb}, title={Skulptur/Plastik},
volume={5954}, booktitle={Lexikon der Kunstpädagogik}, publisher={ATHENA/wbv},
author={Pauls, Karina}, editor={Bering, Kunibert and Niehoff, Rolf and Pauls,
Karina}, year={2022}, pages={481–485}, collection={utb} }'
chicago: 'Pauls, Karina. “Skulptur/Plastik.” In Lexikon der Kunstpädagogik,
edited by Kunibert Bering, Rolf Niehoff, and Karina Pauls, 2nd ed., 5954:481–85.
utb. Bielefeld: ATHENA/wbv, 2022.'
ieee: 'K. Pauls, “Skulptur/Plastik,” in Lexikon der Kunstpädagogik, 2nd ed.,
vol. 5954, K. Bering, R. Niehoff, and K. Pauls, Eds. Bielefeld: ATHENA/wbv, 2022,
pp. 481–485.'
mla: Pauls, Karina. “Skulptur/Plastik.” Lexikon der Kunstpädagogik, edited
by Kunibert Bering et al., 2nd ed., vol. 5954, ATHENA/wbv, 2022, pp. 481–85.
short: 'K. Pauls, in: K. Bering, R. Niehoff, K. Pauls (Eds.), Lexikon der Kunstpädagogik,
2nd ed., ATHENA/wbv, Bielefeld, 2022, pp. 481–485.'
date_created: 2024-01-02T15:29:03Z
date_updated: 2026-05-08T12:52:02Z
edition: '2'
editor:
- first_name: Kunibert
full_name: Bering, Kunibert
last_name: Bering
- first_name: Rolf
full_name: Niehoff, Rolf
last_name: Niehoff
- first_name: Karina
full_name: Pauls, Karina
last_name: Pauls
intvolume: ' 5954'
language:
- iso: ger
page: 481-485
place: Bielefeld
publication: Lexikon der Kunstpädagogik
publication_identifier:
isbn:
- 978-3-8252-5954-9
publication_status: published
publisher: ATHENA/wbv
series_title: utb
status: public
title: Skulptur/Plastik
type: encyclopedia_article
user_id: '78235'
volume: 5954
year: '2022'
...
---
_id: '36332'
abstract:
- lang: eng
text: AlSi casting alloys combine excellent castability with high strength. Hence,
this group of alloys is often used in the automotive sector. The challenge for
this application is the brittle character of these alloys which leads to cracks
during joint formation when mechanical joining technologies are used. A rise in
ductility can be achieved by a considerable increase in the solidification rate
which results in grain refinement. High solidification rates can be realized in
twin–roll casting (TRC) by water-cooled rolls. Therefore, a hypoeutectic EN AC–AlSi9
(for European Norm - aluminum cast product) is manufactured by the TRC process
and analyzed. Subsequently, joining investigations are performed on castings in
as-cast and heat-treated condition using the self-piercing riveting process considering
the joint formation and the load-bearing capacity. Due to the fine microstructure,
the crack initiation can be avoided during joining, while maintaining the joining
parameters, especially by specimens in heat treatment conditions. Furthermore,
due to the extremely fine microstructure, the load-bearing capacity of the joint
can be significantly increased in terms of the maximum load-bearing force and
the energy absorbed.
article_number: '2200874'
article_type: original
author:
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Fabian
full_name: Kappe, Fabian
id: '66459'
last_name: Kappe
- first_name: Jakob
full_name: Ostermeier, Jakob
last_name: Ostermeier
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
citation:
ama: Neuser M, Kappe F, Ostermeier J, et al. Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials.
2022;24(10). doi:10.1002/adem.202200874
apa: Neuser, M., Kappe, F., Ostermeier, J., Krüger, J. T., Bobbert, M., Meschut,
G., Schaper, M., & Grydin, O. (2022). Mechanical Properties and Joinability
of AlSi9 Alloy Manufactured by Twin‐Roll Casting. Advanced Engineering Materials,
24(10), Article 2200874. https://doi.org/10.1002/adem.202200874
bibtex: '@article{Neuser_Kappe_Ostermeier_Krüger_Bobbert_Meschut_Schaper_Grydin_2022,
title={Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting}, volume={24}, DOI={10.1002/adem.202200874},
number={102200874}, journal={Advanced Engineering Materials}, publisher={Wiley},
author={Neuser, Moritz and Kappe, Fabian and Ostermeier, Jakob and Krüger, Jan
Tobias and Bobbert, Mathias and Meschut, Gerson and Schaper, Mirko and Grydin,
Olexandr}, year={2022} }'
chicago: Neuser, Moritz, Fabian Kappe, Jakob Ostermeier, Jan Tobias Krüger, Mathias
Bobbert, Gerson Meschut, Mirko Schaper, and Olexandr Grydin. “Mechanical Properties
and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll Casting.” Advanced
Engineering Materials 24, no. 10 (2022). https://doi.org/10.1002/adem.202200874.
ieee: 'M. Neuser et al., “Mechanical Properties and Joinability of AlSi9
Alloy Manufactured by Twin‐Roll Casting,” Advanced Engineering Materials,
vol. 24, no. 10, Art. no. 2200874, 2022, doi: 10.1002/adem.202200874.'
mla: Neuser, Moritz, et al. “Mechanical Properties and Joinability of AlSi9 Alloy
Manufactured by Twin‐Roll Casting.” Advanced Engineering Materials, vol.
24, no. 10, 2200874, Wiley, 2022, doi:10.1002/adem.202200874.
short: M. Neuser, F. Kappe, J. Ostermeier, J.T. Krüger, M. Bobbert, G. Meschut,
M. Schaper, O. Grydin, Advanced Engineering Materials 24 (2022).
date_created: 2023-01-12T09:33:55Z
date_updated: 2026-05-12T12:15:46Z
department:
- _id: '158'
- _id: '157'
- _id: '321'
doi: 10.1002/adem.202200874
intvolume: ' 24'
issue: '10'
keyword:
- Condensed Matter Physics
- General Materials Science
language:
- iso: eng
main_file_link:
- open_access: '1'
url: https://onlinelibrary.wiley.com/doi/full/10.1002/adem.202200874
oa: '1'
project:
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '133'
name: 'TRR 285 - C: TRR 285 - Project Area C'
- _id: '146'
name: 'TRR 285 – C02: TRR 285 - Subproject C02'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Advanced Engineering Materials
publication_identifier:
issn:
- 1438-1656
- 1527-2648
publication_status: published
publisher: Wiley
quality_controlled: '1'
status: public
title: Mechanical Properties and Joinability of AlSi9 Alloy Manufactured by Twin‐Roll
Casting
type: journal_article
user_id: '7850'
volume: 24
year: '2022'
...
---
_id: '37647'
abstract:
- lang: eng
text: Mechanical joining processes are an essential part of modern lightweight construction.
They permit materials of different types to be joined in a way that is suitable
for the loads involved. These processes reach their limits, however, as soon as
the boundary conditions change. In most cases, these elements are specially adapted
to the joining point and cannot be used universally. Changes require cost-intensive
adaptation of both the element and the process control, thus making production
more complex. This results in high costs due to the increased number of auxiliary
joining element variants required and reduces the economic efficiency of mechanical
joining. One approach to overcoming this issue is the use of adaptive auxiliary
joining elements formed by friction spinning. This article presents the current
state of research on pre-hole-free joining with adaptive joining elements. The
overall process chain is illustrated, explained and analyzed. Special attention
is paid to demonstrating the feasibility of pre-hole-free joining with adaptive
joining elements. The chosen mechanical parameters are subsequently listed. Finally,
a comprehensive outlook of the future development potential is derived.
article_type: original
author:
- first_name: Christian
full_name: Wischer, Christian
last_name: Wischer
- first_name: Werner
full_name: Homberg, Werner
last_name: Homberg
citation:
ama: Wischer C, Homberg W. Further Development of an Adaptive Joining Technique
Based on Friction Spinning to Produce Pre-Hole-Free Joints. Key Engineering
Materials. 2022;926:1468-1478. doi:10.4028/p-1n6741
apa: Wischer, C., & Homberg, W. (2022). Further Development of an Adaptive Joining
Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints. Key Engineering
Materials, 926, 1468–1478. https://doi.org/10.4028/p-1n6741
bibtex: '@article{Wischer_Homberg_2022, title={Further Development of an Adaptive
Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints},
volume={926}, DOI={10.4028/p-1n6741},
journal={Key Engineering Materials}, publisher={Trans Tech Publications, Ltd.},
author={Wischer, Christian and Homberg, Werner}, year={2022}, pages={1468–1478}
}'
chicago: 'Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive
Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”
Key Engineering Materials 926 (2022): 1468–78. https://doi.org/10.4028/p-1n6741.'
ieee: 'C. Wischer and W. Homberg, “Further Development of an Adaptive Joining Technique
Based on Friction Spinning to Produce Pre-Hole-Free Joints,” Key Engineering
Materials, vol. 926, pp. 1468–1478, 2022, doi: 10.4028/p-1n6741.'
mla: Wischer, Christian, and Werner Homberg. “Further Development of an Adaptive
Joining Technique Based on Friction Spinning to Produce Pre-Hole-Free Joints.”
Key Engineering Materials, vol. 926, Trans Tech Publications, Ltd., 2022,
pp. 1468–78, doi:10.4028/p-1n6741.
short: C. Wischer, W. Homberg, Key Engineering Materials 926 (2022) 1468–1478.
date_created: 2023-01-20T07:47:18Z
date_updated: 2026-05-12T12:00:20Z
department:
- _id: '156'
doi: 10.4028/p-1n6741
intvolume: ' 926'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- General Materials Science
language:
- iso: eng
page: 1468-1478
project:
- _id: '147'
name: 'TRR 285 – C03: TRR 285 - Subproject C03'
- _id: '133'
name: TRR 285 - Project Area C
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Key Engineering Materials
publication_identifier:
issn:
- 1662-9795
publication_status: published
publisher: Trans Tech Publications, Ltd.
quality_controlled: '1'
status: public
title: Further Development of an Adaptive Joining Technique Based on Friction Spinning
to Produce Pre-Hole-Free Joints
type: journal_article
user_id: '7850'
volume: 926
year: '2022'
...
---
_id: '30963'
abstract:
- lang: eng
text: In this paper, a study based on experimental and numerical simulations is
performed to analyze fatigue cracks in clinched joints. An experimental investigation
is conducted to determine the failure modes of clinched joints under cyclic loading
at different load amplitudes with single-lap shear tests. In addition, numerical
FEM simulations of clinching process and subsequent shear loading are performed
to support the experimental investigations by analyzing the state of stresses
at the location of failure. An attempt is made to explain the location of crack
initiation in the experiments using evaluation variables such as contact shear
stress and maximum principal stress.
author:
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mortaza
full_name: Otroshi, Mortaza
id: '71269'
last_name: Otroshi
orcid: 0000-0002-8652-9209
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Martina
full_name: Zimmermann, Martina
last_name: Zimmermann
citation:
ama: Ewenz L, Bielak CR, Otroshi M, Bobbert M, Meschut G, Zimmermann M. Numerical
and experimental identification of fatigue crack initiation sites in clinched
joints. Production Engineering. 2022;16(2-3):305-313. doi:10.1007/s11740-022-01124-z
apa: Ewenz, L., Bielak, C. R., Otroshi, M., Bobbert, M., Meschut, G., & Zimmermann,
M. (2022). Numerical and experimental identification of fatigue crack initiation
sites in clinched joints. Production Engineering, 16(2–3), 305–313.
https://doi.org/10.1007/s11740-022-01124-z
bibtex: '@article{Ewenz_Bielak_Otroshi_Bobbert_Meschut_Zimmermann_2022, title={Numerical
and experimental identification of fatigue crack initiation sites in clinched
joints}, volume={16}, DOI={10.1007/s11740-022-01124-z},
number={2–3}, journal={Production Engineering}, publisher={Springer Science and
Business Media LLC}, author={Ewenz, Lars and Bielak, Christian Roman and Otroshi,
Mortaza and Bobbert, Mathias and Meschut, Gerson and Zimmermann, Martina}, year={2022},
pages={305–313} }'
chicago: 'Ewenz, Lars, Christian Roman Bielak, Mortaza Otroshi, Mathias Bobbert,
Gerson Meschut, and Martina Zimmermann. “Numerical and Experimental Identification
of Fatigue Crack Initiation Sites in Clinched Joints.” Production Engineering
16, no. 2–3 (2022): 305–13. https://doi.org/10.1007/s11740-022-01124-z.'
ieee: 'L. Ewenz, C. R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, and M. Zimmermann,
“Numerical and experimental identification of fatigue crack initiation sites in
clinched joints,” Production Engineering, vol. 16, no. 2–3, pp. 305–313,
2022, doi: 10.1007/s11740-022-01124-z.'
mla: Ewenz, Lars, et al. “Numerical and Experimental Identification of Fatigue Crack
Initiation Sites in Clinched Joints.” Production Engineering, vol. 16,
no. 2–3, Springer Science and Business Media LLC, 2022, pp. 305–13, doi:10.1007/s11740-022-01124-z.
short: L. Ewenz, C.R. Bielak, M. Otroshi, M. Bobbert, G. Meschut, M. Zimmermann,
Production Engineering 16 (2022) 305–313.
date_created: 2022-04-27T09:02:05Z
date_updated: 2026-05-12T13:03:16Z
department:
- _id: '157'
doi: 10.1007/s11740-022-01124-z
intvolume: ' 16'
issue: 2-3
keyword:
- Industrial and Manufacturing Engineering
- Mechanical Engineering
language:
- iso: eng
page: 305-313
project:
- _id: '132'
name: 'TRR 285 - B: TRR 285 - Project Area B'
- _id: '141'
name: 'TRR 285 – B02: TRR 285 - Subproject B02'
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Production Engineering
publication_identifier:
issn:
- 0944-6524
- 1863-7353
publication_status: published
publisher: Springer Science and Business Media LLC
quality_controlled: '1'
status: public
title: Numerical and experimental identification of fatigue crack initiation sites
in clinched joints
type: journal_article
user_id: '7850'
volume: 16
year: '2022'
...
---
_id: '34069'
article_number: '100133'
author:
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Sven
full_name: Martin, Sven
id: '38177'
last_name: Martin
- first_name: Christian
full_name: Steinfelder, Christian
last_name: Steinfelder
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Alexander
full_name: Brosius, Alexander
last_name: Brosius
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Thomas
full_name: Tröster, Thomas
id: '553'
last_name: Tröster
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: 'Schramm B, Martin S, Steinfelder C, et al. A Review on the Modeling of the
Clinching Process Chain - Part I: Design Phase. Journal of Advanced Joining
Processes. 2022;6. doi:10.1016/j.jajp.2022.100133'
apa: 'Schramm, B., Martin, S., Steinfelder, C., Bielak, C. R., Brosius, A., Meschut,
G., Tröster, T., Wallmersperger, T., & Mergheim, J. (2022). A Review on the
Modeling of the Clinching Process Chain - Part I: Design Phase. Journal of
Advanced Joining Processes, 6, Article 100133. https://doi.org/10.1016/j.jajp.2022.100133'
bibtex: '@article{Schramm_Martin_Steinfelder_Bielak_Brosius_Meschut_Tröster_Wallmersperger_Mergheim_2022,
title={A Review on the Modeling of the Clinching Process Chain - Part I: Design
Phase}, volume={6}, DOI={10.1016/j.jajp.2022.100133},
number={100133}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Schramm, Britta and Martin, Sven and Steinfelder, Christian and Bielak,
Christian Roman and Brosius, Alexander and Meschut, Gerson and Tröster, Thomas
and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }'
chicago: 'Schramm, Britta, Sven Martin, Christian Steinfelder, Christian Roman Bielak,
Alexander Brosius, Gerson Meschut, Thomas Tröster, Thomas Wallmersperger, and
Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part
I: Design Phase.” Journal of Advanced Joining Processes 6 (2022). https://doi.org/10.1016/j.jajp.2022.100133.'
ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process
Chain - Part I: Design Phase,” Journal of Advanced Joining Processes, vol.
6, Art. no. 100133, 2022, doi: 10.1016/j.jajp.2022.100133.'
mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process
Chain - Part I: Design Phase.” Journal of Advanced Joining Processes, vol.
6, 100133, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100133.'
short: B. Schramm, S. Martin, C. Steinfelder, C.R. Bielak, A. Brosius, G. Meschut,
T. Tröster, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes
6 (2022).
date_created: 2022-11-14T08:53:49Z
date_updated: 2026-05-12T12:59:39Z
department:
- _id: '143'
- _id: '157'
doi: 10.1016/j.jajp.2022.100133
intvolume: ' 6'
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
- _id: '140'
name: 'TRR 285 – B01: TRR 285 - Subproject B01'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '132'
name: TRR 285 - Project Area B
- _id: '131'
name: TRR 285 - Project Area A
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'A Review on the Modeling of the Clinching Process Chain - Part I: Design Phase'
type: journal_article
user_id: '7850'
volume: 6
year: '2022'
...
---
_id: '34068'
article_number: '100134'
author:
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Johannes
full_name: Friedlein, Johannes
last_name: Friedlein
- first_name: Benjamin
full_name: Gröger, Benjamin
last_name: Gröger
- first_name: Christian Roman
full_name: Bielak, Christian Roman
id: '34782'
last_name: Bielak
- first_name: Mathias
full_name: Bobbert, Mathias
id: '7850'
last_name: Bobbert
- first_name: Maik
full_name: Gude, Maik
last_name: Gude
- first_name: Gerson
full_name: Meschut, Gerson
id: '32056'
last_name: Meschut
orcid: 0000-0002-2763-1246
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
citation:
ama: 'Schramm B, Friedlein J, Gröger B, et al. A Review on the Modeling of the Clinching
Process Chain - Part II: Joining Process. Journal of Advanced Joining Processes.
Published online 2022. doi:10.1016/j.jajp.2022.100134'
apa: 'Schramm, B., Friedlein, J., Gröger, B., Bielak, C. R., Bobbert, M., Gude,
M., Meschut, G., Wallmersperger, T., & Mergheim, J. (2022). A Review on the
Modeling of the Clinching Process Chain - Part II: Joining Process. Journal
of Advanced Joining Processes, Article 100134. https://doi.org/10.1016/j.jajp.2022.100134'
bibtex: '@article{Schramm_Friedlein_Gröger_Bielak_Bobbert_Gude_Meschut_Wallmersperger_Mergheim_2022,
title={A Review on the Modeling of the Clinching Process Chain - Part II: Joining
Process}, DOI={10.1016/j.jajp.2022.100134},
number={100134}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Schramm, Britta and Friedlein, Johannes and Gröger, Benjamin and
Bielak, Christian Roman and Bobbert, Mathias and Gude, Maik and Meschut, Gerson
and Wallmersperger, Thomas and Mergheim, Julia}, year={2022} }'
chicago: 'Schramm, Britta, Johannes Friedlein, Benjamin Gröger, Christian Roman
Bielak, Mathias Bobbert, Maik Gude, Gerson Meschut, Thomas Wallmersperger, and
Julia Mergheim. “A Review on the Modeling of the Clinching Process Chain - Part
II: Joining Process.” Journal of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100134.'
ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process
Chain - Part II: Joining Process,” Journal of Advanced Joining Processes,
Art. no. 100134, 2022, doi: 10.1016/j.jajp.2022.100134.'
mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process
Chain - Part II: Joining Process.” Journal of Advanced Joining Processes,
100134, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100134.'
short: B. Schramm, J. Friedlein, B. Gröger, C.R. Bielak, M. Bobbert, M. Gude, G.
Meschut, T. Wallmersperger, J. Mergheim, Journal of Advanced Joining Processes
(2022).
date_created: 2022-11-14T08:53:07Z
date_updated: 2026-05-12T12:58:23Z
department:
- _id: '143'
- _id: '157'
doi: 10.1016/j.jajp.2022.100134
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '137'
name: 'TRR 285 – A03: TRR 285 - Subproject A03'
- _id: '135'
name: 'TRR 285 – A01: TRR 285 - Subproject A01'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
- _id: '131'
name: TRR 285 - Project Area A
- _id: '132'
name: TRR 285 - Project Area B
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'A Review on the Modeling of the Clinching Process Chain - Part II: Joining
Process'
type: journal_article
user_id: '7850'
year: '2022'
...
---
_id: '34070'
article_number: '100135'
author:
- first_name: Britta
full_name: Schramm, Britta
id: '4668'
last_name: Schramm
- first_name: Sven
full_name: Harzheim, Sven
last_name: Harzheim
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Tintu David
full_name: Joy, Tintu David
id: '30821'
last_name: Joy
- first_name: Martin
full_name: Hofmann, Martin
last_name: Hofmann
- first_name: Julia
full_name: Mergheim, Julia
last_name: Mergheim
- first_name: Thomas
full_name: Wallmersperger, Thomas
last_name: Wallmersperger
citation:
ama: 'Schramm B, Harzheim S, Weiß D, et al. A Review on the Modeling of the Clinching
Process Chain - Part III: Operational Phase. Journal of Advanced Joining Processes.
Published online 2022. doi:10.1016/j.jajp.2022.100135'
apa: 'Schramm, B., Harzheim, S., Weiß, D., Joy, T. D., Hofmann, M., Mergheim, J.,
& Wallmersperger, T. (2022). A Review on the Modeling of the Clinching Process
Chain - Part III: Operational Phase. Journal of Advanced Joining Processes,
Article 100135. https://doi.org/10.1016/j.jajp.2022.100135'
bibtex: '@article{Schramm_Harzheim_Weiß_Joy_Hofmann_Mergheim_Wallmersperger_2022,
title={A Review on the Modeling of the Clinching Process Chain - Part III: Operational
Phase}, DOI={10.1016/j.jajp.2022.100135},
number={100135}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Schramm, Britta and Harzheim, Sven and Weiß, Deborah and Joy, Tintu
David and Hofmann, Martin and Mergheim, Julia and Wallmersperger, Thomas}, year={2022}
}'
chicago: 'Schramm, Britta, Sven Harzheim, Deborah Weiß, Tintu David Joy, Martin
Hofmann, Julia Mergheim, and Thomas Wallmersperger. “A Review on the Modeling
of the Clinching Process Chain - Part III: Operational Phase.” Journal of Advanced
Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100135.'
ieee: 'B. Schramm et al., “A Review on the Modeling of the Clinching Process
Chain - Part III: Operational Phase,” Journal of Advanced Joining Processes,
Art. no. 100135, 2022, doi: 10.1016/j.jajp.2022.100135.'
mla: 'Schramm, Britta, et al. “A Review on the Modeling of the Clinching Process
Chain - Part III: Operational Phase.” Journal of Advanced Joining Processes,
100135, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100135.'
short: B. Schramm, S. Harzheim, D. Weiß, T.D. Joy, M. Hofmann, J. Mergheim, T. Wallmersperger,
Journal of Advanced Joining Processes (2022).
date_created: 2022-11-14T08:55:34Z
date_updated: 2026-05-12T12:52:34Z
department:
- _id: '143'
doi: 10.1016/j.jajp.2022.100135
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '143'
name: 'TRR 285 – B04: TRR 285 - Subproject B04'
- _id: '142'
name: 'TRR 285 – B03: TRR 285 - Subproject B03'
- _id: '139'
name: 'TRR 285 – A05: TRR 285 - Subproject A05'
- _id: '132'
name: TRR 285 - Project Area B
- _id: '131'
name: TRR 285 - Project Area A
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: 'A Review on the Modeling of the Clinching Process Chain - Part III: Operational
Phase'
type: journal_article
user_id: '7850'
year: '2022'
...
---
_id: '31238'
article_number: '100108'
author:
- first_name: Robert
full_name: Kupfer, Robert
last_name: Kupfer
- first_name: Daniel
full_name: Köhler, Daniel
last_name: Köhler
- first_name: David
full_name: Römisch, David
last_name: Römisch
- first_name: Simon
full_name: Wituschek, Simon
last_name: Wituschek
- first_name: Lars
full_name: Ewenz, Lars
last_name: Ewenz
- first_name: Jan
full_name: Kalich, Jan
last_name: Kalich
- first_name: Deborah
full_name: Weiß, Deborah
id: '45673'
last_name: Weiß
- first_name: Behdad
full_name: Sadeghian, Behdad
last_name: Sadeghian
- first_name: Matthias
full_name: Busch, Matthias
last_name: Busch
- first_name: Jan Tobias
full_name: Krüger, Jan Tobias
id: '44307'
last_name: Krüger
orcid: 0000-0002-0827-9654
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Max
full_name: Böhnke, Max
id: '45779'
last_name: Böhnke
- first_name: Christian-Roman
full_name: Bielak, Christian-Roman
last_name: Bielak
- first_name: Juliane
full_name: Troschitz, Juliane
last_name: Troschitz
citation:
ama: Kupfer R, Köhler D, Römisch D, et al. Clinching of Aluminum Materials – Methods
for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes. Published online 2022. doi:10.1016/j.jajp.2022.100108
apa: Kupfer, R., Köhler, D., Römisch, D., Wituschek, S., Ewenz, L., Kalich, J.,
Weiß, D., Sadeghian, B., Busch, M., Krüger, J. T., Neuser, M., Grydin, O., Böhnke,
M., Bielak, C.-R., & Troschitz, J. (2022). Clinching of Aluminum Materials
– Methods for the Continuous Characterization of Process, Microstructure and Properties.
Journal of Advanced Joining Processes, Article 100108. https://doi.org/10.1016/j.jajp.2022.100108
bibtex: '@article{Kupfer_Köhler_Römisch_Wituschek_Ewenz_Kalich_Weiß_Sadeghian_Busch_Krüger_et
al._2022, title={Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties}, DOI={10.1016/j.jajp.2022.100108},
number={100108}, journal={Journal of Advanced Joining Processes}, publisher={Elsevier
BV}, author={Kupfer, Robert and Köhler, Daniel and Römisch, David and Wituschek,
Simon and Ewenz, Lars and Kalich, Jan and Weiß, Deborah and Sadeghian, Behdad
and Busch, Matthias and Krüger, Jan Tobias and et al.}, year={2022} }'
chicago: Kupfer, Robert, Daniel Köhler, David Römisch, Simon Wituschek, Lars Ewenz,
Jan Kalich, Deborah Weiß, et al. “Clinching of Aluminum Materials – Methods for
the Continuous Characterization of Process, Microstructure and Properties.” Journal
of Advanced Joining Processes, 2022. https://doi.org/10.1016/j.jajp.2022.100108.
ieee: 'R. Kupfer et al., “Clinching of Aluminum Materials – Methods for the
Continuous Characterization of Process, Microstructure and Properties,” Journal
of Advanced Joining Processes, Art. no. 100108, 2022, doi: 10.1016/j.jajp.2022.100108.'
mla: Kupfer, Robert, et al. “Clinching of Aluminum Materials – Methods for the Continuous
Characterization of Process, Microstructure and Properties.” Journal of Advanced
Joining Processes, 100108, Elsevier BV, 2022, doi:10.1016/j.jajp.2022.100108.
short: R. Kupfer, D. Köhler, D. Römisch, S. Wituschek, L. Ewenz, J. Kalich, D. Weiß,
B. Sadeghian, M. Busch, J.T. Krüger, M. Neuser, O. Grydin, M. Böhnke, C.-R. Bielak,
J. Troschitz, Journal of Advanced Joining Processes (2022).
date_created: 2022-05-12T13:48:16Z
date_updated: 2026-05-12T13:49:43Z
department:
- _id: '158'
doi: 10.1016/j.jajp.2022.100108
keyword:
- Mechanical Engineering
- Mechanics of Materials
- Engineering (miscellaneous)
- Chemical Engineering (miscellaneous)
language:
- iso: eng
project:
- _id: '131'
name: 'TRR 285 - A: TRR 285 - Project Area A'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '130'
name: 'TRR 285: Methodenentwicklung zur mechanischen Fügbarkeit in wandlungsfähigen
Prozessketten'
publication: Journal of Advanced Joining Processes
publication_identifier:
issn:
- 2666-3309
publication_status: published
publisher: Elsevier BV
quality_controlled: '1'
status: public
title: Clinching of Aluminum Materials – Methods for the Continuous Characterization
of Process, Microstructure and Properties
type: journal_article
user_id: '7850'
year: '2022'
...
---
_id: '29771'
author:
- first_name: Olexandr
full_name: Grydin, Olexandr
id: '43822'
last_name: Grydin
- first_name: Dag
full_name: Mortensen, Dag
last_name: Mortensen
- first_name: Moritz
full_name: Neuser, Moritz
id: '32340'
last_name: Neuser
- first_name: Dag
full_name: Lindholm, Dag
last_name: Lindholm
- first_name: Hallvard G.
full_name: Fjaer, Hallvard G.
last_name: Fjaer
- first_name: Mirko
full_name: Schaper, Mirko
id: '43720'
last_name: Schaper
citation:
ama: 'Grydin O, Mortensen D, Neuser M, Lindholm D, Fjaer HG, Schaper M. Numerical
and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips. In: Light Metals 2022.
Springer International Publishing; 2022. doi:10.1007/978-3-030-92529-1_96'
apa: Grydin, O., Mortensen, D., Neuser, M., Lindholm, D., Fjaer, H. G., & Schaper,
M. (2022). Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips. In Light Metals 2022.
Springer International Publishing. https://doi.org/10.1007/978-3-030-92529-1_96
bibtex: '@inbook{Grydin_Mortensen_Neuser_Lindholm_Fjaer_Schaper_2022, place={Cham},
title={Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips}, DOI={10.1007/978-3-030-92529-1_96},
booktitle={Light Metals 2022}, publisher={Springer International Publishing},
author={Grydin, Olexandr and Mortensen, Dag and Neuser, Moritz and Lindholm, Dag
and Fjaer, Hallvard G. and Schaper, Mirko}, year={2022} }'
chicago: 'Grydin, Olexandr, Dag Mortensen, Moritz Neuser, Dag Lindholm, Hallvard
G. Fjaer, and Mirko Schaper. “Numerical and Experimental Investigation of Heat
Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum
Strips.” In Light Metals 2022. Cham: Springer International Publishing,
2022. https://doi.org/10.1007/978-3-030-92529-1_96.'
ieee: 'O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H. G. Fjaer, and M. Schaper,
“Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips,” in Light Metals 2022,
Cham: Springer International Publishing, 2022.'
mla: Grydin, Olexandr, et al. “Numerical and Experimental Investigation of Heat
Transfer in the Solidification-Deformation Zone During Twin-Roll Casting of Aluminum
Strips.” Light Metals 2022, Springer International Publishing, 2022, doi:10.1007/978-3-030-92529-1_96.
short: 'O. Grydin, D. Mortensen, M. Neuser, D. Lindholm, H.G. Fjaer, M. Schaper,
in: Light Metals 2022, Springer International Publishing, Cham, 2022.'
date_created: 2022-02-07T18:02:27Z
date_updated: 2026-05-12T13:47:55Z
department:
- _id: '158'
- _id: '630'
doi: 10.1007/978-3-030-92529-1_96
language:
- iso: eng
place: Cham
project:
- _id: '130'
name: 'TRR 285: TRR 285'
- _id: '136'
name: 'TRR 285 – A02: TRR 285 - Subproject A02'
- _id: '131'
name: TRR 285 - Project Area A
publication: Light Metals 2022
publication_identifier:
isbn:
- '9783030925284'
- '9783030925291'
issn:
- 2367-1181
- 2367-1696
publication_status: published
publisher: Springer International Publishing
quality_controlled: '1'
status: public
title: Numerical and Experimental Investigation of Heat Transfer in the Solidification-Deformation
Zone During Twin-Roll Casting of Aluminum Strips
type: book_chapter
user_id: '7850'
year: '2022'
...
---
_id: '65710'
alternative_title:
- Aufgaben und ausführliche Lösungen zur Prüfungsvorbereitung
author:
- first_name: Hans-Jürgen
full_name: Stoppel, Hans-Jürgen
id: '101162'
last_name: Stoppel
- first_name: Birgit
full_name: Griese, Birgit
last_name: Griese
citation:
ama: Stoppel H-J, Griese B. Übungsbuch zur Linearen Algebra. 10th ed. Springer
Berlin Heidelberg; 2022. doi:10.1007/978-3-662-63744-9
apa: Stoppel, H.-J., & Griese, B. (2022). Übungsbuch zur Linearen Algebra
(10th ed.). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-63744-9
bibtex: '@book{Stoppel_Griese_2022, place={Berlin, Heidelberg}, edition={10}, title={Übungsbuch
zur Linearen Algebra}, DOI={10.1007/978-3-662-63744-9},
publisher={Springer Berlin Heidelberg}, author={Stoppel, Hans-Jürgen and Griese,
Birgit}, year={2022} }'
chicago: 'Stoppel, Hans-Jürgen, and Birgit Griese. Übungsbuch zur Linearen Algebra.
10th ed. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022. https://doi.org/10.1007/978-3-662-63744-9.'
ieee: 'H.-J. Stoppel and B. Griese, Übungsbuch zur Linearen Algebra, 10th
ed. Berlin, Heidelberg: Springer Berlin Heidelberg, 2022.'
mla: Stoppel, Hans-Jürgen, and Birgit Griese. Übungsbuch zur Linearen Algebra.
10th ed., Springer Berlin Heidelberg, 2022, doi:10.1007/978-3-662-63744-9.
short: H.-J. Stoppel, B. Griese, Übungsbuch zur Linearen Algebra, 10th ed., Springer
Berlin Heidelberg, Berlin, Heidelberg, 2022.
date_created: 2026-05-28T15:00:20Z
date_updated: 2026-05-29T06:20:48Z
doi: 10.1007/978-3-662-63744-9
edition: '10'
language:
- iso: ger
place: Berlin, Heidelberg
publication_identifier:
isbn:
- '9783662637432'
- '9783662637449'
issn:
- 2626-613X
- 2626-6148
publication_status: published
publisher: Springer Berlin Heidelberg
status: public
title: Übungsbuch zur Linearen Algebra
type: book
user_id: '101162'
year: '2022'
...
---
_id: '66909'
author:
- first_name: Rabea
full_name: Marker, Rabea
last_name: Marker
- first_name: Harry
full_name: Kullmann, Harry
id: '77972'
last_name: Kullmann
orcid: 0000-0001-5488-5105
- first_name: Dominik
full_name: Zentarra, Dominik
last_name: Zentarra
- first_name: Sabine
full_name: Geist, Sabine
last_name: Geist
- first_name: Birgit
full_name: Lütje-Klose, Birgit
last_name: Lütje-Klose
citation:
ama: 'Marker R, Kullmann H, Zentarra D, Geist S, Lütje-Klose B. Schulbezogenes Zugehörigkeitsgefühl
in inklusiven Lerngruppen: Vergleich der Labor-schule Bielefeld mit Vergleichsstichproben
aus inklusiven Regelschulklassen und Ermittlung von Bedingungsfaktoren. In: ;
2022.'
apa: 'Marker, R., Kullmann, H., Zentarra, D., Geist, S., & Lütje-Klose, B. (2022).
Schulbezogenes Zugehörigkeitsgefühl in inklusiven Lerngruppen: Vergleich der
Labor-schule Bielefeld mit Vergleichsstichproben aus inklusiven Regelschulklassen
und Ermittlung von Bedingungsfaktoren. 9. Tagung der Gesellschaft für Empirische
Bildungsforschung (GEBF), Otto-Friedrich-Universität Bamberg.'
bibtex: '@inproceedings{Marker_Kullmann_Zentarra_Geist_Lütje-Klose_2022, title={Schulbezogenes
Zugehörigkeitsgefühl in inklusiven Lerngruppen: Vergleich der Labor-schule Bielefeld
mit Vergleichsstichproben aus inklusiven Regelschulklassen und Ermittlung von
Bedingungsfaktoren}, author={Marker, Rabea and Kullmann, Harry and Zentarra, Dominik
and Geist, Sabine and Lütje-Klose, Birgit}, year={2022} }'
chicago: 'Marker, Rabea, Harry Kullmann, Dominik Zentarra, Sabine Geist, and Birgit
Lütje-Klose. “Schulbezogenes Zugehörigkeitsgefühl in Inklusiven Lerngruppen: Vergleich
Der Labor-Schule Bielefeld Mit Vergleichsstichproben Aus Inklusiven Regelschulklassen
Und Ermittlung von Bedingungsfaktoren,” 2022.'
ieee: 'R. Marker, H. Kullmann, D. Zentarra, S. Geist, and B. Lütje-Klose, “Schulbezogenes
Zugehörigkeitsgefühl in inklusiven Lerngruppen: Vergleich der Labor-schule Bielefeld
mit Vergleichsstichproben aus inklusiven Regelschulklassen und Ermittlung von
Bedingungsfaktoren,” presented at the 9. Tagung der Gesellschaft für Empirische
Bildungsforschung (GEBF), Otto-Friedrich-Universität Bamberg, 2022.'
mla: 'Marker, Rabea, et al. Schulbezogenes Zugehörigkeitsgefühl in Inklusiven
Lerngruppen: Vergleich Der Labor-Schule Bielefeld Mit Vergleichsstichproben Aus
Inklusiven Regelschulklassen Und Ermittlung von Bedingungsfaktoren. 2022.'
short: 'R. Marker, H. Kullmann, D. Zentarra, S. Geist, B. Lütje-Klose, in: 2022.'
conference:
end_date: 2022-03-11
location: Otto-Friedrich-Universität Bamberg
name: 9. Tagung der Gesellschaft für Empirische Bildungsforschung (GEBF)
start_date: 2022-03-11
date_created: 2026-09-01T10:52:48Z
date_updated: 2026-09-01T10:52:58Z
department:
- _id: '556'
jel:
- I24
language:
- iso: eng
quality_controlled: '1'
status: public
title: 'Schulbezogenes Zugehörigkeitsgefühl in inklusiven Lerngruppen: Vergleich der
Labor-schule Bielefeld mit Vergleichsstichproben aus inklusiven Regelschulklassen
und Ermittlung von Bedingungsfaktoren'
type: conference
user_id: '105186'
year: '2022'
...
---
_id: '34434'
abstract:
- lang: eng
text: In timing chain drives, the chain is the critical component regarding the
wear. Relative movements take place at the chain joint between pin and bush, which
lead to wear of the chain joint due to friction and so to chain elongation. The
chain joint is generally lubricated with oils, through which elastohydrodynamic
processes can occur in the gap between the pin and the bush of the chain joint.
A simulation model is developed here to examine these elastohydrodynamic processes
considering a mass conserving cavitation model, the Newtonian flow behaviour of
the lubricant and the structuring of the bush surface, whereby the real form of
the bush is considered. MBS simulations are used to obtain realistic loads on
the chain joint.
author:
- first_name: Lionel
full_name: Simo Kamga, Lionel
last_name: Simo Kamga
- first_name: Dominik
full_name: Meffert, Dominik
last_name: Meffert
- first_name: Balázs
full_name: Magyar, Balázs
id: '97759'
last_name: Magyar
- first_name: Manuel
full_name: Oehler, Manuel
last_name: Oehler
- first_name: Bernd
full_name: Sauer, Bernd
last_name: Sauer
citation:
ama: Simo Kamga L, Meffert D, Magyar B, Oehler M, Sauer B. Simulative investigation
of the influence of surface texturing on the elastohydrodynamic lubrication in
chain joints. Tribology International. 2022;171:107564. doi:https://doi.org/10.1016/j.triboint.2022.107564
apa: Simo Kamga, L., Meffert, D., Magyar, B., Oehler, M., & Sauer, B. (2022).
Simulative investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints. Tribology International, 171, 107564.
https://doi.org/10.1016/j.triboint.2022.107564
bibtex: '@article{Simo Kamga_Meffert_Magyar_Oehler_Sauer_2022, title={Simulative
investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints}, volume={171}, DOI={https://doi.org/10.1016/j.triboint.2022.107564},
journal={Tribology International}, author={Simo Kamga, Lionel and Meffert, Dominik
and Magyar, Balázs and Oehler, Manuel and Sauer, Bernd}, year={2022}, pages={107564}
}'
chicago: 'Simo Kamga, Lionel, Dominik Meffert, Balázs Magyar, Manuel Oehler, and
Bernd Sauer. “Simulative Investigation of the Influence of Surface Texturing on
the Elastohydrodynamic Lubrication in Chain Joints.” Tribology International
171 (2022): 107564. https://doi.org/10.1016/j.triboint.2022.107564.'
ieee: 'L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, and B. Sauer, “Simulative
investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints,” Tribology International, vol. 171, p. 107564,
2022, doi: https://doi.org/10.1016/j.triboint.2022.107564.'
mla: Simo Kamga, Lionel, et al. “Simulative Investigation of the Influence of Surface
Texturing on the Elastohydrodynamic Lubrication in Chain Joints.” Tribology
International, vol. 171, 2022, p. 107564, doi:https://doi.org/10.1016/j.triboint.2022.107564.
short: L. Simo Kamga, D. Meffert, B. Magyar, M. Oehler, B. Sauer, Tribology International
171 (2022) 107564.
date_created: 2022-12-15T09:28:48Z
date_updated: 2026-07-18T13:20:50Z
department:
- _id: '146'
doi: https://doi.org/10.1016/j.triboint.2022.107564
extern: '1'
intvolume: ' 171'
keyword:
- EHL-simulation
- Cavitation
- Chain drives
- Chain joint
- Micro-structuring
language:
- iso: eng
page: '107564'
publication: Tribology International
publication_identifier:
issn:
- 0301-679X
quality_controlled: '1'
status: public
title: Simulative investigation of the influence of surface texturing on the elastohydrodynamic
lubrication in chain joints
type: journal_article
user_id: '97759'
volume: 171
year: '2022'
...
---
_id: '24760'
abstract:
- lang: ger
text: "Anwendungen von Laser-Sinter Bauteilen als Sichtteile sind aufgrund der vergleichsweise
schlechten Oberflächenqualität sehr begrenzt. In dieser Arbeit werden dreidimensionale
Kennwerte benutzt, um die Oberflächenqualität von Laser-Sinter Bauteiloberflächen
und die Einflüsse aus unterschiedlichen Bereichen der gesamten Prozesskette zu
evaluieren. Beispielsweise wurden objektive Kennwerte, mit deren Hilfe Orangenhaut
zu identifizieren ist, und Prozessparameter, die diese deutlich vermindern, gefunden.
Mittels Durchführung von haptischen Versuchen wurde das subjektive Empfinden ermittelt
und konnten zu objektiven Kennwerten korreliert werden. Eine mikroskopische Betrachtung
des flachen Oberflächenwinkels mit verschieden farbigen Pulvern zeigt neue Erkenntnisse
zum Anschmelzvorgang von Partikeln an die Schmelze. Zur nachträglichen Glättung
von Oberflächen wurden mechanische, chemische und optische Nachbehandlungsmethoden
verwendet und deren Potential aufgezeigt. Eine abschließende neuartige Simulation
der dreidimensionalen Topografie bildet die Grundlage für ein Programm zur automatischen
und funktionsgerechten Orientierung von Bauteilen, welche am Beispiel eines realen
Bauteils erfolgreich validiert wurde. Zusammengenommen zeigen die Ergebnisse,
dass die richtige Wahl von Bauorientierung und Prozessparametern entscheidend
für die Bauteilqualität ist und selbst eine aufwendige Nachbearbeitung eine ungeschickte
Wahl derer nur schwerlich ausgleichen kann.\r\n"
author:
- first_name: Patrick
full_name: Delfs, Patrick
last_name: Delfs
citation:
ama: Delfs P. Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv
hergestellter Laser-Sinter Bauteile. Vol 22. Shaker Verlag GmbH; 2021.
apa: Delfs, P. (2021). Dreidimensionale Oberflächenanalyse und Topografie-Simulation
additiv hergestellter Laser-Sinter Bauteile (Vol. 22). Shaker Verlag GmbH.
bibtex: '@book{Delfs_2021, place={Düren}, series={Forschungsberichte des Direct
Manufacturing Research Centers}, title={Dreidimensionale Oberflächenanalyse und
Topografie-Simulation additiv hergestellter Laser-Sinter Bauteile}, volume={22},
publisher={Shaker Verlag GmbH}, author={Delfs, Patrick}, year={2021}, collection={Forschungsberichte
des Direct Manufacturing Research Centers} }'
chicago: 'Delfs, Patrick. Dreidimensionale Oberflächenanalyse und Topografie-Simulation
additiv hergestellter Laser-Sinter Bauteile. Vol. 22. Forschungsberichte des
Direct Manufacturing Research Centers. Düren: Shaker Verlag GmbH, 2021.'
ieee: 'P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation
additiv hergestellter Laser-Sinter Bauteile, vol. 22. Düren: Shaker Verlag
GmbH, 2021.'
mla: Delfs, Patrick. Dreidimensionale Oberflächenanalyse und Topografie-Simulation
additiv hergestellter Laser-Sinter Bauteile. Shaker Verlag GmbH, 2021.
short: P. Delfs, Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv
hergestellter Laser-Sinter Bauteile, Shaker Verlag GmbH, Düren, 2021.
date_created: 2021-09-21T11:36:18Z
date_updated: 2022-01-06T06:56:34Z
department:
- _id: '150'
- _id: '624'
- _id: '219'
intvolume: ' 22'
keyword:
- Additive Fertigung
- Oberflächenqualität
- 3D
- Topografie
- Simulation
- PA12
- Laser-Sintern
- Rauheit
language:
- iso: ger
main_file_link:
- url: https://www.shaker.de/de/content/catalogue/index.asp?lang=de&ID=8&ISBN=978-3-8440-7825-1&search=yes
page: '126'
place: Düren
publication_identifier:
isbn:
- 978-3-8440-7825-1
publication_status: published
publisher: Shaker Verlag GmbH
series_title: Forschungsberichte des Direct Manufacturing Research Centers
status: public
supervisor:
- first_name: Hans-Joachim
full_name: Schmid, Hans-Joachim
id: '464'
last_name: Schmid
title: Dreidimensionale Oberflächenanalyse und Topografie-Simulation additiv hergestellter
Laser-Sinter Bauteile
type: dissertation
user_id: '71545'
volume: 22
year: '2021'
...